\r
#include <string.h>\r
\r
-static const uint16_t FIRMWARE_VERSION = 0x0603;\r
+static const uint16_t FIRMWARE_VERSION = 0x0604;\r
\r
// 1 flash row\r
static const uint8_t DEFAULT_CONFIG[128] =\r
static void\r
scsiTestCommand()\r
{\r
- int resultCode = 0; // TODO scsiSelfTest();\r
+ int resultCode = scsiSelfTest();\r
uint8_t response[] =\r
{\r
resultCode == 0 ? S2S_CFG_STATUS_GOOD : S2S_CFG_STATUS_ERR,\r
// You should have received a copy of the GNU General Public License\r
// along with SCSI2SD. If not, see <http://www.gnu.org/licenses/>.\r
\r
+#include "stm32f2xx.h"\r
+\r
#include "scsi.h"\r
#include "scsiPhy.h"\r
#include "config.h"\r
int prep = 0;\r
int i = 0;\r
int scsiActive = 0;\r
- // int sdActive = 0;\r
+ int sdActive = 0;\r
while ((i < totalSDSectors) &&\r
likely(scsiDev.phase == DATA_IN) &&\r
likely(!scsiDev.resetFlag))\r
// Wait for the next DMA interrupt. It's beneficial to halt the\r
// processor to give the DMA controller more memory bandwidth to\r
// work with.\r
-#if 0\r
- int scsiBusy = 1;\r
- int sdBusy = 1;\r
- while (scsiBusy && sdBusy)\r
+ if (sdActive && scsiActive)\r
{\r
- uint8_t intr = CyEnterCriticalSection();\r
- scsiBusy = scsiDMABusy();\r
- sdBusy = sdDMABusy();\r
- if (scsiBusy && sdBusy)\r
- {\r
- __WFI();\r
- }\r
- CyExitCriticalSection(intr);\r
+ __WFI();\r
}\r
-#endif\r
\r
-#if 0\r
- if (sdActive && !sdBusy && sdReadSectorDMAPoll())\r
+ if (sdActive && sdReadDMAPoll())\r
{\r
+ prep += sdActive;\r
sdActive = 0;\r
- prep++;\r
}\r
\r
- // Usually SD is slower than the SCSI interface.\r
- // Prioritise starting the read of the next sector over starting a\r
- // SCSI transfer for the last sector\r
- // ie. NO "else" HERE.\r
if (!sdActive &&\r
(prep - i < buffers) &&\r
(prep < totalSDSectors))\r
{\r
// Start an SD transfer if we have space.\r
- if (transfer.multiBlock)\r
+ uint32_t startBuffer = prep % buffers;\r
+ uint32_t sectors = totalSDSectors - prep;\r
+ if (!scsiActive && prep == i)\r
{\r
- sdReadMultiSectorDMA(&scsiDev.data[SD_SECTOR_SIZE * (prep % buffers)]);\r
+ sectors = 1; // We need to get some data to send ASAP !\r
}\r
else\r
{\r
- sdReadSingleSectorDMA(sdLBA + prep, &scsiDev.data[SD_SECTOR_SIZE * (prep % buffers)]);\r
+ uint32_t freeBuffers = buffers - (prep - i);\r
+ uint32_t contiguousBuffers = buffers - startBuffer;\r
+ freeBuffers = freeBuffers < contiguousBuffers\r
+ ? freeBuffers : contiguousBuffers;\r
+ sectors = sectors < freeBuffers ? sectors : freeBuffers;\r
}\r
- sdActive = 1;\r
- }\r
-#endif\r
-#if 0\r
- uint32_t maxSectors = sizeof(scsiDev.data) / SD_SECTOR_SIZE;\r
- uint32_t rem = totalSDSectors - i;\r
- uint32_t sectors =\r
- rem < maxSectors ? rem : maxSectors;\r
- sdTmpRead(&scsiDev.data[0], i + sdLBA, sectors);\r
- scsiWrite(&scsiDev.data[0], sectors * SD_SECTOR_SIZE);\r
- i += sectors;\r
-#endif\r
- if ((prep - i < buffers) &&\r
- (prep < totalSDSectors))\r
- {\r
- // TODO MM Blocking reads are bad mmkay\r
- sdTmpRead(&scsiDev.data[SD_SECTOR_SIZE * (prep % buffers)], sdLBA + prep, 1);\r
- prep++;\r
+ sdReadDMA(sdLBA + prep, sectors, &scsiDev.data[SD_SECTOR_SIZE * startBuffer]);\r
+\r
+ sdActive = sectors;\r
}\r
\r
if (scsiActive && scsiPhyComplete() && scsiWriteDMAPoll())\r
likely(scsiDev.phase == DATA_IN) &&\r
likely(!scsiDev.resetFlag))\r
{\r
-#if 0\r
- _WFI();\r
-#endif\r
+ __WFI();\r
}\r
\r
\r
transfer.currentBlock = 0;\r
\r
// Cancel long running commands!\r
+#if 0\r
if (\r
((scsiDev.boardCfg.flags & S2S_CFG_ENABLE_CACHE) == 0) ||\r
(transfer.multiBlock == 0)\r
)\r
+#endif\r
{\r
-#if 0\r
sdCompleteTransfer();\r
-#endif\r
}\r
\r
transfer.multiBlock = 0;\r
}\r
else\r
{\r
-#if 0\r
// Wait for our 1ms timer to save some power.\r
// There's an interrupt on the SEL signal to ensure we respond\r
// quickly to any SCSI commands. The selection abort time is\r
// only 250us, and new SCSI-3 controllers time-out very\r
// not long after that, so we need to ensure we wake up quickly.\r
- uint8_t interruptState = CyEnterCriticalSection();\r
- if (!SCSI_ReadFilt(SCSI_Filt_SEL))\r
+ uint32_t interruptState = __get_PRIMASK();\r
+ __disable_irq();\r
+\r
+ if (!*SCSI_STS_SELECTED)\r
{\r
__WFI(); // Will wake on interrupt, regardless of mask\r
}\r
- CyExitCriticalSection(interruptState);\r
-#endif\r
+ if (!interruptState)\r
+ {\r
+ __enable_irq();\r
+ }\r
}\r
}\r
else if (scsiDev.phase >= 0)\r
\r
uint8_t selStatus = *SCSI_STS_SELECTED;\r
\r
-#if 0\r
- int sel = SCSI_ReadFilt(SCSI_Filt_SEL);\r
- int bsy = SCSI_ReadFilt(SCSI_Filt_BSY);\r
- int io = SCSI_ReadPin(SCSI_In_IO);\r
-\r
- // Only read these pins AFTER SEL and BSY - we don't want to catch them\r
- // during a transition period.\r
- uint8_t mask = scsiReadDBxPins();\r
- int atnFlag = SCSI_ReadFilt(SCSI_Filt_ATN);\r
-#endif\r
int tgtIndex;\r
TargetState* target = NULL;\r
for (tgtIndex = 0; tgtIndex < S2S_MAX_TARGETS; ++tgtIndex)\r
// Wait for the next DMA interrupt (or the 1ms systick)\r
// It's beneficial to halt the processor to\r
// give the DMA controller more memory bandwidth to work with.\r
-#if 0\r
__WFI();\r
-#endif\r
trace(trace_spinReadDMAPoll);\r
\r
while (!scsiReadDMAPoll() && likely(!scsiDev.resetFlag))\r
{\r
-#if 0\r
-// TODO NEED SCSI DMA IRQs\r
- __WFI();\r
-#endif\r
+ __WFI();\r
};\r
}\r
\r
// Wait for the next DMA interrupt (or the 1ms systick)\r
// It's beneficial to halt the processor to\r
// give the DMA controller more memory bandwidth to work with.\r
-#if 0\r
__WFI();\r
-#endif\r
trace(trace_spinReadDMAPoll);\r
\r
while (!scsiWriteDMAPoll() && likely(!scsiDev.resetFlag))\r
{\r
-#if 0\r
-// TODO NEED SCSI DMA IRQs\r
- __WFI();\r
-#endif\r
+ __WFI();\r
};\r
}\r
\r
- while (!scsiPhyComplete() && likely(!scsiDev.resetFlag)) {}\r
+ while (!scsiPhyComplete() && likely(!scsiDev.resetFlag))\r
+ {\r
+ __WFI();\r
+ }\r
\r
#if FIFODEBUG\r
if (!scsiPhyFifoAltEmpty()) {\r
#endif\r
\r
scsiPhyFifoFlip();\r
-#if 0\r
-// TODO NEED SCSI IRQs\r
- __WFI();\r
-#endif\r
-\r
i += chunk;\r
}\r
- while (!scsiPhyComplete() && likely(!scsiDev.resetFlag)) {}\r
+ while (!scsiPhyComplete() && likely(!scsiDev.resetFlag))\r
+ {\r
+ __WFI();\r
+ }\r
\r
#if FIFODEBUG\r
if (!scsiPhyFifoAltEmpty()) {\r
\r
scsiPhyFifoSel = 0;\r
*SCSI_FIFO_SEL = 0;\r
+ *SCSI_CTRL_DBX = 0;\r
\r
// DMA Benchmark code\r
// Currently 10MB/s. Assume 20MB/s is achievable with 16 bits.\r
\r
// FPGA comms test code\r
#ifdef FPGA_TEST\r
-\r
while(1)\r
{\r
for (int j = 0; j < SCSI_FIFO_DEPTH; ++j)\r
scsiDev.data[j] = j;\r
}\r
\r
+ if (!scsiPhyFifoEmpty())\r
+ {\r
+ assertFail();\r
+ }\r
+\r
*SCSI_CTRL_PHASE = DATA_IN;\r
HAL_DMA_Start(\r
&memToFSMC,\r
HAL_DMA_FULL_TRANSFER,\r
0xffffffff);\r
\r
+ if (!scsiPhyFifoFull())\r
+ {\r
+ assertFail();\r
+ }\r
+\r
memset(&scsiDev.data[0], 0, SCSI_FIFO_DEPTH);\r
\r
*SCSI_CTRL_PHASE = DATA_OUT;\r
HAL_DMA_FULL_TRANSFER,\r
0xffffffff);\r
\r
+ if (!scsiPhyFifoEmpty())\r
+ {\r
+ assertFail();\r
+ }\r
+\r
+\r
for (int j = 0; j < SCSI_FIFO_DEPTH; ++j)\r
{\r
if (scsiDev.data[j] != (uint8_t) j)\r
*SCSI_CTRL_BSY = 0x00;\r
scsiPhyFifoSel = 0;\r
*SCSI_FIFO_SEL = 0;\r
+ *SCSI_CTRL_DBX = 0;\r
\r
}\r
\r
// 32 = other error\r
int scsiSelfTest()\r
{\r
- return 0;\r
-#if 0\r
+ if (scsiDev.phase != BUS_FREE)\r
+ {\r
+ return 32;\r
+ }\r
+\r
+ // Acquire the SCSI bus.\r
+ for (int i = 0; i < 100; ++i)\r
+ {\r
+ if (scsiStatusBSY())\r
+ {\r
+ s2s_delay_ms(1);\r
+ }\r
+ }\r
+ if (scsiStatusBSY())\r
+ {\r
+ // Error, couldn't acquire scsi bus\r
+ return 32;\r
+ }\r
+ *SCSI_CTRL_BSY = 1;\r
+ if (! scsiStatusBSY())\r
+ {\r
+ // Error, BSY doesn't work.\r
+ return 32;\r
+ }\r
+\r
+ // Should be safe to use the bus now.\r
+\r
int result = 0;\r
\r
- // TEST DBx and DBp\r
+ // TEST DBx\r
+ // TODO test DBp\r
int i;\r
- SCSI_Out_Ctl_Write(1); // Write bits manually.\r
- SCSI_CTL_PHASE_Write(__scsiphase_io); // Needed for parity generation\r
for (i = 0; i < 256; ++i)\r
{\r
- SCSI_Out_Bits_Write(i);\r
- scsiDeskewDelay();\r
- if (scsiReadDBxPins() != (i & 0xff))\r
+ *SCSI_CTRL_DBX = i;\r
+ busSettleDelay();\r
+ if (*SCSI_STS_DBX != (i & 0xff))\r
{\r
result |= 1;\r
}\r
- if (Lookup_OddParity[i & 0xff] != SCSI_ReadPin(SCSI_In_DBP))\r
+ /*if (Lookup_OddParity[i & 0xff] != SCSI_ReadPin(SCSI_In_DBP))\r
{\r
result |= 2;\r
- }\r
+ }*/\r
}\r
- SCSI_Out_Ctl_Write(0); // Write bits normally.\r
+ *SCSI_CTRL_DBX = 0;\r
\r
// TEST MSG, CD, IO\r
+ /* TODO\r
for (i = 0; i < 8; ++i)\r
{\r
SCSI_CTL_PHASE_Write(i);\r
}\r
SCSI_ClearPin(signalsOut[i]);\r
}\r
+ */\r
+\r
+ *SCSI_CTRL_BSY = 0;\r
return result;\r
-#endif\r
}\r
\r
#define SCSI_DATA_CNT_HI ((volatile uint8_t*)0x60000004)
#define SCSI_DATA_CNT_LO ((volatile uint8_t*)0x60000005)
#define SCSI_DATA_CNT_SET ((volatile uint8_t*)0x60000006)
+#define SCSI_CTRL_DBX ((volatile uint8_t*)0x60000007)
#define SCSI_STS_FIFO ((volatile uint8_t*)0x60000010)
#define SCSI_STS_ALTFIFO ((volatile uint8_t*)0x60000011)
void sdTmpWrite(uint8_t* data, uint32_t lba, int sectors);
#if 0
-
-
-
-
-#define SCSI_SetPin(pin) \
- CyPins_SetPin((pin));
-
-#define SCSI_ClearPin(pin) \
- CyPins_ClearPin((pin));
-
-// Active low: we interpret a 0 as "true", and non-zero as "false"
-#define SCSI_ReadPin(pin) \
- (CyPins_ReadPin((pin)) == 0)
-
-// These signals go through a glitch filter - we do not access the pin
-// directly
-enum FilteredInputs
-{
- SCSI_Filt_ATN = 0x01,
- SCSI_Filt_BSY = 0x02,
- SCSI_Filt_SEL = 0x04,
- SCSI_Filt_RST = 0x08,
- SCSI_Filt_ACK = 0x10
-};
-#define SCSI_ReadFilt(filt) \
- ((SCSI_Filtered_Read() & (filt)) == 0)
-
-// SCSI delays, as referenced to the cpu clock
-#define CPU_CLK_PERIOD_NS (1000000000U / BCLK__BUS_CLK__HZ)
-#define scsiDeskewDelay() CyDelayCycles((55 / CPU_CLK_PERIOD_NS) + 1)
-
// Contains the odd-parity flag for a given 8-bit value.
extern const uint8_t Lookup_OddParity[256];
void scsiWriteDMA(const uint8_t* data, uint32_t count);
int scsiWriteDMAPoll();
-#if 0
-uint8_t scsiReadDBxPins(void);
-
-
int scsiSelfTest(void);
#endif
-
-#endif
// Global\r
SdDevice sdDev;\r
\r
-#if 0\r
-enum SD_CMD_STATE { CMD_STATE_IDLE, CMD_STATE_READ, CMD_STATE_WRITE };\r
-static int sdCmdState = CMD_STATE_IDLE;\r
-static uint32_t sdCmdNextLBA; // Only valid in CMD_STATE_READ or CMD_STATE_WRITE\r
-static uint32_t sdCmdTime;\r
-static uint32_t sdLastCmdState = CMD_STATE_IDLE;\r
-\r
-enum SD_IO_STATE { SD_DMA, SD_ACCEPTED, SD_IDLE };\r
-static int sdIOState = SD_IDLE;\r
-\r
-// Private DMA variables.\r
-static uint8 sdDMARxChan = CY_DMA_INVALID_CHANNEL;\r
-static uint8 sdDMATxChan = CY_DMA_INVALID_CHANNEL;\r
-\r
-// Dummy location for DMA to send unchecked CRC bytes to\r
-static uint8 discardBuffer __attribute__((aligned(4)));\r
-\r
-// 2 bytes CRC, response, 8bits to close the clock..\r
-// "NCR" time is up to 8 bytes.\r
-static uint8_t writeResponseBuffer[8] __attribute__((aligned(4)));\r
-\r
-// Padded with a dummy byte just to allow the tx DMA channel to\r
-// use 2-byte bursts for performance.\r
-static uint8_t writeStartToken[2] __attribute__((aligned(4))) = {0xFF, 0xFC};\r
-\r
-// Source of dummy SPI bytes for DMA\r
-static uint8_t dummyBuffer[2] __attribute__((aligned(4))) = {0xFF, 0xFF};\r
-\r
-volatile uint8_t sdRxDMAComplete;\r
-volatile uint8_t sdTxDMAComplete;\r
-\r
-static void sdCompleteRead();\r
-static void sdCompleteWrite();\r
-\r
-CY_ISR_PROTO(sdRxISR);\r
-CY_ISR(sdRxISR)\r
-{\r
- sdRxDMAComplete = 1;\r
-}\r
-CY_ISR_PROTO(sdTxISR);\r
-CY_ISR(sdTxISR)\r
-{\r
- sdTxDMAComplete = 1;\r
-}\r
-\r
-static uint8 sdCrc7(uint8* chr, uint8 cnt, uint8 crc)\r
-{\r
- uint8 a;\r
- for(a = 0; a < cnt; a++)\r
- {\r
- uint8 Data = chr[a];\r
- uint8 i;\r
- for(i = 0; i < 8; i++)\r
- {\r
- crc <<= 1;\r
- if( (Data & 0x80) ^ (crc & 0x80) ) {crc ^= 0x09;}\r
- Data <<= 1;\r
- }\r
- }\r
- return crc & 0x7F;\r
-}\r
-\r
-\r
-// Read and write 1 byte.\r
-static uint8_t sdSpiByte(uint8_t value)\r
-{\r
- SDCard_WriteTxData(value);\r
- trace(trace_spinSpiByte);\r
- while (!(SDCard_ReadRxStatus() & SDCard_STS_RX_FIFO_NOT_EMPTY)) {}\r
- trace(trace_sdSpiByte);\r
- return SDCard_ReadRxData();\r
-}\r
-\r
-static void sdWaitWriteBusy()\r
-{\r
- uint8 val;\r
- do\r
- {\r
- val = sdSpiByte(0xFF);\r
- } while (val != 0xFF);\r
-}\r
-\r
-static void sdPreCmdState(uint32_t newState)\r
-{\r
- if (sdCmdState == CMD_STATE_READ)\r
- {\r
- sdCompleteRead();\r
- }\r
- else if (sdCmdState == CMD_STATE_WRITE)\r
- {\r
- sdCompleteWrite();\r
- }\r
- sdCmdState = CMD_STATE_IDLE;\r
-\r
- if (sdLastCmdState != newState && newState != CMD_STATE_IDLE)\r
- {\r
- sdWaitWriteBusy();\r
- sdLastCmdState = newState;\r
- }\r
-}\r
-\r
-static uint16_t sdDoCommand(\r
- uint8_t cmd,\r
- uint32_t param,\r
- int useCRC,\r
- int use2byteResponse)\r
-{\r
- int waitWhileBusy = (cmd != SD_GO_IDLE_STATE) && (cmd != SD_STOP_TRANSMISSION);\r
-\r
- // "busy" probe. We'll examine the results later.\r
- if (waitWhileBusy)\r
- {\r
- SDCard_WriteTxData(0xFF);\r
- }\r
-\r
- // send is static as the address must remain consistent for the static\r
- // DMA descriptors to work.\r
- // Size must be divisible by 2 to suit 2-byte-burst TX DMA channel.\r
- static uint8_t send[6] __attribute__((aligned(4)));\r
- send[0] = cmd | 0x40;\r
- send[1] = param >> 24;\r
- send[2] = param >> 16;\r
- send[3] = param >> 8;\r
- send[4] = param;\r
- if (unlikely(useCRC))\r
- {\r
- send[5] = (sdCrc7(send, 5, 0) << 1) | 1;\r
- }\r
- else\r
- {\r
- send[5] = 1; // stop bit\r
- }\r
-\r
- static uint8_t dmaRxTd = CY_DMA_INVALID_TD;\r
- static uint8_t dmaTxTd = CY_DMA_INVALID_TD;\r
- if (unlikely(dmaRxTd == CY_DMA_INVALID_TD))\r
- {\r
- dmaRxTd = CyDmaTdAllocate();\r
- dmaTxTd = CyDmaTdAllocate();\r
- CyDmaTdSetConfiguration(dmaTxTd, sizeof(send), CY_DMA_DISABLE_TD, TD_INC_SRC_ADR|SD_TX_DMA__TD_TERMOUT_EN);\r
- CyDmaTdSetAddress(dmaTxTd, LO16((uint32)&send), LO16((uint32)SDCard_TXDATA_PTR));\r
- CyDmaTdSetConfiguration(dmaRxTd, sizeof(send), CY_DMA_DISABLE_TD, SD_RX_DMA__TD_TERMOUT_EN);\r
- CyDmaTdSetAddress(dmaRxTd, LO16((uint32)SDCard_RXDATA_PTR), LO16((uint32)&discardBuffer));\r
- }\r
-\r
- sdTxDMAComplete = 0;\r
- sdRxDMAComplete = 0;\r
-\r
- CyDmaChSetInitialTd(sdDMARxChan, dmaRxTd);\r
- CyDmaChSetInitialTd(sdDMATxChan, dmaTxTd);\r
-\r
- // Some Samsung cards enter a busy-state after single-sector reads.\r
- // But we also need to wait for R1B to complete from the multi-sector\r
- // reads.\r
- if (waitWhileBusy)\r
- {\r
- trace(trace_spinSDRxFIFO);\r
- while (!(SDCard_ReadRxStatus() & SDCard_STS_RX_FIFO_NOT_EMPTY)) {}\r
- int busy = SDCard_ReadRxData() != 0xFF;\r
- if (unlikely(busy))\r
- {\r
- trace(trace_spinSDBusy);\r
- while (sdSpiByte(0xFF) != 0xFF) {}\r
- }\r
- }\r
-\r
- // The DMA controller is a bit trigger-happy. It will retain\r
- // a drq request that was triggered while the channel was\r
- // disabled.\r
- CyDmaChSetRequest(sdDMATxChan, CY_DMA_CPU_REQ);\r
- CyDmaClearPendingDrq(sdDMARxChan);\r
-\r
- // There is no flow control, so we must ensure we can read the bytes\r
- // before we start transmitting\r
- CyDmaChEnable(sdDMARxChan, 1);\r
- CyDmaChEnable(sdDMATxChan, 1);\r
-\r
- trace(trace_spinSDDMA);\r
- int allComplete = 0;\r
- while (!allComplete)\r
- {\r
- uint8_t intr = CyEnterCriticalSection();\r
- allComplete = sdTxDMAComplete && sdRxDMAComplete;\r
- if (!allComplete)\r
- {\r
- __WFI();\r
- }\r
- CyExitCriticalSection(intr);\r
- }\r
-\r
- uint16_t response = sdSpiByte(0xFF); // Result code or stuff byte\r
- if (unlikely(cmd == SD_STOP_TRANSMISSION))\r
- {\r
- // Stuff byte is required for this command only.\r
- // Part 1 Simplified standard 3.01\r
- // "The stop command has an execution delay due to the serial command\r
- // transmission."\r
- response = sdSpiByte(0xFF);\r
- }\r
-\r
- uint32_t start = getTime_ms();\r
-\r
- trace(trace_spinSDBusy);\r
- while ((response & 0x80) && likely(elapsedTime_ms(start) <= 200))\r
- {\r
- response = sdSpiByte(0xFF);\r
- }\r
- if (unlikely(use2byteResponse))\r
- {\r
- response = (response << 8) | sdSpiByte(0xFF);\r
- }\r
- return response;\r
-}\r
-\r
-\r
-static inline uint16_t sdCommandAndResponse(uint8_t cmd, uint32_t param)\r
-{\r
- return sdDoCommand(cmd, param, 0, 0);\r
-}\r
-\r
-static inline uint16_t sdCRCCommandAndResponse(uint8_t cmd, uint32_t param)\r
-{\r
- return sdDoCommand(cmd, param, 1, 0);\r
-}\r
-\r
-// Clear the sticky status bits on error.\r
-static void sdClearStatus()\r
-{\r
- sdSpiByte(0xFF);\r
- uint16_t r2 = sdDoCommand(SD_SEND_STATUS, 0, 1, 1);\r
- (void) r2;\r
-}\r
-\r
-void\r
-sdReadMultiSectorPrep(uint32_t sdLBA, uint32_t sdSectors)\r
-{\r
- uint32_t tmpNextLBA = sdLBA + sdSectors;\r
-\r
- if (!sdDev.ccs)\r
- {\r
- sdLBA = sdLBA * SD_SECTOR_SIZE;\r
- tmpNextLBA = tmpNextLBA * SD_SECTOR_SIZE;\r
- }\r
-\r
- if (sdCmdState == CMD_STATE_READ && sdCmdNextLBA == sdLBA)\r
- {\r
- // Well, that was lucky. We're already reading this data\r
- sdCmdNextLBA = tmpNextLBA;\r
- sdCmdTime = getTime_ms();\r
- }\r
- else\r
- {\r
- sdPreCmdState(CMD_STATE_READ);\r
-\r
- uint8_t v = sdCommandAndResponse(SD_READ_MULTIPLE_BLOCK, sdLBA);\r
- if (unlikely(v))\r
- {\r
- scsiDiskReset();\r
- sdClearStatus();\r
-\r
- scsiDev.status = CHECK_CONDITION;\r
- scsiDev.target->sense.code = HARDWARE_ERROR;\r
- scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
- scsiDev.phase = STATUS;\r
- }\r
- else\r
- {\r
- sdCmdNextLBA = tmpNextLBA;\r
- sdCmdState = CMD_STATE_READ;\r
- sdCmdTime = getTime_ms();\r
- }\r
- }\r
-}\r
-\r
-static void\r
-dmaReadSector(uint8_t* outputBuffer)\r
-{\r
- // Wait for a start-block token.\r
- // Don't wait more than 200ms. The standard recommends 100ms.\r
- uint32_t start = getTime_ms();\r
- uint8_t token = sdSpiByte(0xFF);\r
- trace(trace_spinSDBusy);\r
- while (token != 0xFE && likely(elapsedTime_ms(start) <= 200))\r
- {\r
- if (unlikely(token && ((token & 0xE0) == 0)))\r
- {\r
- // Error token!\r
- break;\r
- }\r
- token = sdSpiByte(0xFF);\r
- }\r
- if (unlikely(token != 0xFE))\r
- {\r
- if (transfer.multiBlock)\r
- {\r
- sdCompleteRead();\r
- }\r
- if (scsiDev.status != CHECK_CONDITION)\r
- {\r
- scsiDev.status = CHECK_CONDITION;\r
- scsiDev.target->sense.code = HARDWARE_ERROR;\r
- scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR;\r
- scsiDev.phase = STATUS;\r
- }\r
- sdClearStatus();\r
- return;\r
- }\r
-\r
- static uint8_t dmaRxTd[2] = { CY_DMA_INVALID_TD, CY_DMA_INVALID_TD};\r
- static uint8_t dmaTxTd = CY_DMA_INVALID_TD;\r
- if (unlikely(dmaRxTd[0] == CY_DMA_INVALID_TD))\r
- {\r
- dmaRxTd[0] = CyDmaTdAllocate();\r
- dmaRxTd[1] = CyDmaTdAllocate();\r
- dmaTxTd = CyDmaTdAllocate();\r
-\r
- // Receive 512 bytes of data and then 2 bytes CRC.\r
- CyDmaTdSetConfiguration(dmaRxTd[0], SD_SECTOR_SIZE, dmaRxTd[1], TD_INC_DST_ADR);\r
- CyDmaTdSetConfiguration(dmaRxTd[1], 2, CY_DMA_DISABLE_TD, SD_RX_DMA__TD_TERMOUT_EN);\r
- CyDmaTdSetAddress(dmaRxTd[1], LO16((uint32)SDCard_RXDATA_PTR), LO16((uint32)&discardBuffer));\r
-\r
- CyDmaTdSetConfiguration(dmaTxTd, SD_SECTOR_SIZE + 2, CY_DMA_DISABLE_TD, SD_TX_DMA__TD_TERMOUT_EN);\r
- CyDmaTdSetAddress(dmaTxTd, LO16((uint32)&dummyBuffer), LO16((uint32)SDCard_TXDATA_PTR));\r
-\r
- }\r
- CyDmaTdSetAddress(dmaRxTd[0], LO16((uint32)SDCard_RXDATA_PTR), LO16((uint32)outputBuffer));\r
-\r
- sdIOState = SD_DMA;\r
- sdTxDMAComplete = 0;\r
- sdRxDMAComplete = 0;\r
-\r
- // Re-loading the initial TD's here is very important, or else\r
- // we'll be re-using the last-used TD, which would be the last\r
- // in the chain (ie. CRC TD)\r
- CyDmaChSetInitialTd(sdDMARxChan, dmaRxTd[0]);\r
- CyDmaChSetInitialTd(sdDMATxChan, dmaTxTd);\r
-\r
- // The DMA controller is a bit trigger-happy. It will retain\r
- // a drq request that was triggered while the channel was\r
- // disabled.\r
- CyDmaChSetRequest(sdDMATxChan, CY_DMA_CPU_REQ);\r
- CyDmaClearPendingDrq(sdDMARxChan);\r
-\r
- // There is no flow control, so we must ensure we can read the bytes\r
- // before we start transmitting\r
- CyDmaChEnable(sdDMARxChan, 1);\r
- CyDmaChEnable(sdDMATxChan, 1);\r
-}\r
+static int sdCmdActive = 0;\r
\r
int\r
-sdReadSectorDMAPoll()\r
+sdReadDMAPoll()\r
{\r
- if (sdRxDMAComplete && sdTxDMAComplete)\r
+ if (hsd.DmaTransferCplt ||\r
+ hsd.SdTransferCplt ||\r
+ (HAL_SD_ErrorTypedef)hsd.SdTransferErr != SD_OK)\r
{\r
+ HAL_SD_CheckReadOperation(&hsd, (uint32_t)SD_DATATIMEOUT);\r
// DMA transfer is complete\r
- sdIOState = SD_IDLE;\r
+ sdCmdActive = 0;\r
return 1;\r
}\r
else\r
}\r
}\r
\r
-void sdReadSingleSectorDMA(uint32_t lba, uint8_t* outputBuffer)\r
+void sdReadDMA(uint32_t lba, uint32_t sectors, uint8_t* outputBuffer)\r
{\r
- sdPreCmdState(CMD_STATE_READ);\r
-\r
- uint8 v;\r
- if (!sdDev.ccs)\r
- {\r
- lba = lba * SD_SECTOR_SIZE;\r
- }\r
- v = sdCommandAndResponse(SD_READ_SINGLE_BLOCK, lba);\r
- if (unlikely(v))\r
+ if (HAL_SD_ReadBlocks_DMA(\r
+ &hsd, (uint32_t*)outputBuffer, lba * 512ll, 512, sectors\r
+ ) != SD_OK)\r
{\r
scsiDiskReset();\r
- sdClearStatus();\r
\r
scsiDev.status = CHECK_CONDITION;\r
scsiDev.target->sense.code = HARDWARE_ERROR;\r
}\r
else\r
{\r
- dmaReadSector(outputBuffer);\r
+ sdCmdActive = 1;\r
}\r
}\r
\r
-void\r
-sdReadMultiSectorDMA(uint8_t* outputBuffer)\r
-{\r
- // Pre: sdReadMultiSectorPrep called.\r
- dmaReadSector(outputBuffer);\r
-}\r
-\r
-static void sdCompleteRead()\r
+void sdCompleteTransfer()\r
{\r
- if (unlikely(sdIOState != SD_IDLE))\r
+ if (sdCmdActive)\r
{\r
- // Not much choice but to wait until we've completed the transfer.\r
- // Cancelling the transfer can't be done as we have no way to reset\r
- // the SD card.\r
- trace(trace_spinSDCompleteRead);\r
- while (!sdReadSectorDMAPoll()) { /* spin */ }\r
+ HAL_SD_StopTransfer(&hsd);\r
+ HAL_DMA_Abort(hsd.hdmarx);\r
+ HAL_DMA_Abort(hsd.hdmatx);\r
+ sdCmdActive = 0;\r
}\r
-\r
-\r
- if (sdCmdState == CMD_STATE_READ)\r
- {\r
- uint8 r1b = sdCommandAndResponse(SD_STOP_TRANSMISSION, 0);\r
-\r
- if (unlikely(r1b) && (scsiDev.phase == DATA_IN))\r
- {\r
- scsiDev.status = CHECK_CONDITION;\r
- scsiDev.target->sense.code = HARDWARE_ERROR;\r
- scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR;\r
- scsiDev.phase = STATUS;\r
- }\r
- }\r
-\r
- // R1b has an optional trailing "busy" signal, but we defer waiting on this.\r
- // The next call so sdCommandAndResponse will wait for the busy state to\r
- // clear.\r
-\r
- sdCmdState = CMD_STATE_IDLE;\r
}\r
\r
+\r
+#if 0\r
void\r
sdWriteMultiSectorDMA(uint8_t* outputBuffer)\r
{\r
CyDmaTdSetAddress(dmaTxTd[1], LO16((uint32)outputBuffer), LO16((uint32)SDCard_TXDATA_PTR));\r
\r
\r
- sdIOState = SD_DMA;\r
// The DMA controller is a bit trigger-happy. It will retain\r
// a drq request that was triggered while the channel was\r
// disabled.\r
sdCmdState = CMD_STATE_IDLE;\r
}\r
\r
-void sdCompleteTransfer()\r
-{\r
- sdPreCmdState(CMD_STATE_IDLE);\r
-}\r
-\r
-\r
-// SD Version 2 (SDHC) support\r
-static int sendIfCond()\r
-{\r
- int retries = 50;\r
-\r
- do\r
- {\r
- // 11:8 Host voltage. 1 = 2.7-3.6V\r
- // 7:0 Echo bits. Ignore.\r
- uint8 status = sdCRCCommandAndResponse(SD_SEND_IF_COND, 0x000001AA);\r
-\r
- if (status == SD_R1_IDLE)\r
- {\r
- // Version 2 card.\r
- sdDev.version = 2;\r
- // Read 32bit response. Should contain the same bytes that\r
- // we sent in the command parameter.\r
- sdSpiByte(0xFF);\r
- sdSpiByte(0xFF);\r
- sdSpiByte(0xFF);\r
- sdSpiByte(0xFF);\r
- break;\r
- }\r
- else if (status & SD_R1_ILLEGAL)\r
- {\r
- // Version 1 card.\r
- sdDev.version = 1;\r
- sdClearStatus();\r
- break;\r
- }\r
-\r
- sdClearStatus();\r
- } while (--retries > 0);\r
-\r
- return retries > 0;\r
-}\r
-\r
-static int sdOpCond()\r
-{\r
- uint32_t start = getTime_ms();\r
-\r
- uint8 status;\r
- do\r
- {\r
- sdCRCCommandAndResponse(SD_APP_CMD, 0);\r
- // Host Capacity Support = 1 (SDHC/SDXC supported)\r
- status = sdCRCCommandAndResponse(SD_APP_SEND_OP_COND, 0x40000000);\r
-\r
- sdClearStatus();\r
-\r
- // Spec says to poll for 1 second.\r
- } while ((status != 0) && (elapsedTime_ms(start) < 1000));\r
-\r
- return status == 0;\r
-}\r
-\r
-static int sdReadOCR()\r
-{\r
- uint32_t start = getTime_ms();\r
- int complete;\r
- uint8 status;\r
-\r
- do\r
- {\r
- uint8 buf[4];\r
- int i;\r
-\r
- status = sdCRCCommandAndResponse(SD_READ_OCR, 0);\r
- if(status) { break; }\r
-\r
- for (i = 0; i < 4; ++i)\r
- {\r
- buf[i] = sdSpiByte(0xFF);\r
- }\r
-\r
- sdDev.ccs = (buf[0] & 0x40) ? 1 : 0;\r
- complete = (buf[0] & 0x80);\r
-\r
- } while (!status &&\r
- !complete &&\r
- (elapsedTime_ms(start) < 1000));\r
-\r
- return (status == 0) && complete;\r
-}\r
-\r
-static void sdReadCID()\r
-{\r
- uint8 startToken;\r
- int maxWait, i;\r
-\r
- uint8 status = sdCRCCommandAndResponse(SD_SEND_CID, 0);\r
- if(status){return;}\r
-\r
- maxWait = 1023;\r
- do\r
- {\r
- startToken = sdSpiByte(0xFF);\r
- } while(maxWait-- && (startToken != 0xFE));\r
- if (startToken != 0xFE) { return; }\r
-\r
- for (i = 0; i < 16; ++i)\r
- {\r
- sdDev.cid[i] = sdSpiByte(0xFF);\r
- }\r
- sdSpiByte(0xFF); // CRC\r
- sdSpiByte(0xFF); // CRC\r
-}\r
-\r
-static int sdReadCSD()\r
-{\r
- uint8 startToken;\r
- int maxWait, i;\r
-\r
- uint8 status = sdCRCCommandAndResponse(SD_SEND_CSD, 0);\r
- if(status){goto bad;}\r
-\r
- maxWait = 1023;\r
- do\r
- {\r
- startToken = sdSpiByte(0xFF);\r
- } while(maxWait-- && (startToken != 0xFE));\r
- if (startToken != 0xFE) { goto bad; }\r
-\r
- for (i = 0; i < 16; ++i)\r
- {\r
- sdDev.csd[i] = sdSpiByte(0xFF);\r
- }\r
- sdSpiByte(0xFF); // CRC\r
- sdSpiByte(0xFF); // CRC\r
-\r
- if ((sdDev.csd[0] >> 6) == 0x00)\r
- {\r
- // CSD version 1\r
- // C_SIZE in bits [73:62]\r
- uint32 c_size = (((((uint32)sdDev.csd[6]) & 0x3) << 16) | (((uint32)sdDev.csd[7]) << 8) | sdDev.csd[8]) >> 6;\r
- uint32 c_mult = (((((uint32)sdDev.csd[9]) & 0x3) << 8) | ((uint32)sdDev.csd[0xa])) >> 7;\r
- uint32 sectorSize = sdDev.csd[5] & 0x0F;\r
- sdDev.capacity = ((c_size+1) * ((uint64)1 << (c_mult+2)) * ((uint64)1 << sectorSize)) / SD_SECTOR_SIZE;\r
- }\r
- else if ((sdDev.csd[0] >> 6) == 0x01)\r
- {\r
- // CSD version 2\r
- // C_SIZE in bits [69:48]\r
-\r
- uint32 c_size =\r
- ((((uint32)sdDev.csd[7]) & 0x3F) << 16) |\r
- (((uint32)sdDev.csd[8]) << 8) |\r
- ((uint32)sdDev.csd[7]);\r
- sdDev.capacity = (c_size + 1) * 1024;\r
- }\r
- else\r
- {\r
- goto bad;\r
- }\r
-\r
- return 1;\r
-bad:\r
- return 0;\r
-}\r
-\r
#endif\r
static void sdInitDMA()\r
{\r
{\r
int result = 0;\r
\r
- // TODO sdCmdState = CMD_STATE_IDLE;\r
sdClear();\r
\r
\r
// Check if there's an SD card present.\r
int result = 0;\r
\r
-#if 0\r
- if ((scsiDev.phase == BUS_FREE) &&\r
- (sdIOState == SD_IDLE) &&\r
- (sdCmdState == CMD_STATE_IDLE))\r
-#endif\r
static int firstInit = 1;\r
\r
if (firstInit)\r
#define SD_SECTOR_SIZE 512
-/*
-typedef enum
-{
- SD_GO_IDLE_STATE = 0,
- SD_SEND_OP_COND = 1,
- SD_SEND_IF_COND = 8, // SD V2
- SD_SEND_CSD = 9,
- SD_SEND_CID = 10,
- SD_STOP_TRANSMISSION = 12,
- SD_SEND_STATUS = 13,
- SD_SET_BLOCKLEN = 16,
- SD_READ_SINGLE_BLOCK = 17,
- SD_READ_MULTIPLE_BLOCK = 18,
- SD_APP_SET_WR_BLK_ERASE_COUNT = 23,
- SD_WRITE_MULTIPLE_BLOCK = 25,
- SD_APP_SEND_OP_COND = 41,
- SD_APP_CMD = 55,
- SD_READ_OCR = 58,
- SD_CRC_ON_OFF = 59
-} SD_CMD;
-
-typedef enum
-{
- SD_R1_IDLE = 1,
- SD_R1_ERASE_RESET = 2,
- SD_R1_ILLEGAL = 4,
- SD_R1_CRC = 8,
- SD_R1_ERASE_SEQ = 0x10,
- SD_R1_ADDRESS = 0x20,
- SD_R1_PARAMETER = 0x40
-} SD_R1;
-*/
-
typedef struct
{
int version; // SDHC = version 2.
} SdDevice;
extern SdDevice sdDev;
-extern volatile uint8_t sdRxDMAComplete;
-extern volatile uint8_t sdTxDMAComplete;
int sdInit(void);
-#define sdDMABusy() (!(sdRxDMAComplete && sdTxDMAComplete))
-
void sdWriteMultiSectorPrep(uint32_t sdLBA, uint32_t sdSectors);
void sdWriteMultiSectorDMA(uint8_t* outputBuffer);
int sdWriteSectorDMAPoll();
-void sdReadMultiSectorPrep(uint32_t sdLBA, uint32_t sdSectors);
-void sdReadMultiSectorDMA(uint8_t* outputBuffer);
-void sdReadSingleSectorDMA(uint32_t lba, uint8_t* outputBuffer);
-int sdReadSectorDMAPoll();
+void sdReadDMA(uint32_t lba, uint32_t sectors, uint8_t* outputBuffer);
+int sdReadDMAPoll();
+void sdCompleteTransfer();
-void sdCompleteTransfer(void);
void sdPoll();
#endif
--- /dev/null
+// Copyright (C) 2016 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of SCSI2SD.
+//
+// SCSI2SD is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// SCSI2SD is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with SCSI2SD. If not, see <http://www.gnu.org/licenses/>.
+
+#include "Dfu.hh"
+
+#include <stdexcept>
+#include <string.h>
+
+using namespace SCSI2SD;
+
+
+
+Dfu::Dfu()
+{
+ libusb_init(&m_usbctx);
+}
+
+Dfu::~Dfu()
+{
+ if (m_usbctx)
+ {
+ libusb_exit(m_usbctx);
+ m_usbctx = NULL;
+ }
+}
+
+bool Dfu::hasDevice()
+{
+ bool found = false;
+
+ libusb_device **list;
+ ssize_t cnt = libusb_get_device_list(m_usbctx, &list);
+ ssize_t i = 0;
+ if (cnt < 0) return false;
+
+ for (i = 0; i < cnt; i++) {
+ libusb_device *device = list[i];
+ libusb_device_descriptor desc;
+ libusb_get_device_descriptor(device, &desc);
+ if (desc.idVendor == Vendor && desc.idProduct == Product )
+ {
+ found = true;
+ break;
+ }
+ }
+
+ libusb_free_device_list(list, 1);
+
+ return found;
+}
+
--- /dev/null
+// Copyright (C) 2016 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of SCSI2SD.
+//
+// SCSI2SD is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// SCSI2SD is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with SCSI2SD. If not, see <http://www.gnu.org/licenses/>.
+
+#include <libusb.h>
+
+#include <string>
+
+#ifndef SCSI2SD_DFU_H
+#define SCSI2SD_DFU_H
+
+namespace SCSI2SD
+{
+
+class Dfu
+{
+public:
+ Dfu();
+
+ ~Dfu();
+
+ bool hasDevice();
+
+private:
+ enum { Vendor = 0x0483, Product = 0xdf11 };
+
+ libusb_context* m_usbctx;
+
+ std::string m_filename;
+};
+
+} // namespace
+
+#endif
+
-VPATH=../firmware dfu-programmer/src
+VPATH=../firmware TerminalWx/src TerminalWx/src/taTelnet TerminalWx/src/GTerm
VERSION=6.0
NAME=scsi2sd-util6
CPPFLAGS_LIBUSB=$(shell pkg-config libusb-1.0 --cflags)
LDFLAGS_LIBUSB=$(shell pkg-config libusb-1.0 --libs)
else
-CPPFLAGS_LIBUSB=-I libusb-1.0.9/libusb
+CPPFLAGS_LIBUSB=-I $(PWD)/libusb-1.0.20/libusb
LDFLAGS_LIBUSB=-L $(BUILD)/libusb/libusb/.libs -lusb-1.0
endif
LDFLAGS_WX=$(shell $(BUILD)/wx/wx-config --libs)
endif
-CPPFLAGS = $(CPPFLAGS_HIDAPI) -I. -I ../../include -Idfu-programmer/src \
+CPPFLAGS = $(CPPFLAGS_HIDAPI) -I. -I ../../include -ITerminalWx/src \
-Ilibzipper-1.0.4 \
$(CPPFLAGS_ZLIB) \
$(CPPFLAGS_LIBUSB) \
EXE=.exe
WX_CONFIG+=--host=i686-w64-mingw32
LIBUSB_CONFIG+=--host=i686-w64-mingw32 --disable-shared
+ DFU-UTIL_CONFIG+=--host=i686-w64-mingw32
endif
ifeq ($(TARGET),Win64)
VPATH += hidapi/windows
EXE=.exe
WX_CONFIG+=--host=x86_64-w64-mingw32
LIBUSB_CONFIG+=--host=x86_64-w64-mingw32 --disable-shared
+ DFU-UTIL_CONFIG+=--host=x86_64-w64-mingw32
endif
ifeq ($(TARGET),Linux)
VPATH += hidapi/linux
LDFLAGS += -ludev -lexpat -lusb-1.0
BUILD := $(PWD)/build/linux
LIBUSB_CONFIG+=--disable-shared
+ LDFLAGS_LIBUSB+= -ludev -lpthread
endif
ifeq ($(TARGET),Darwin)
# Should match OSX
CXX=clang++ -stdlib=libc++ -mmacosx-version-min=10.7
WX_CONFIG += --with-macosx-version-min=10.7
LIBUSB_CONFIG += --with-macosx-version-min=10.7 --disable-shared
+ LDFLAGS_LIBUSB += -lobjc
+ DFU-UTIL_CONFIG += --with-macosx-version-min=10.7 --disable-shared
BUILD := $(PWD)/build/mac
all: $(BUILD)/scsi2sd-util6.dmg
$(BUILD)/TargetPanel.o \
$(BUILD)/SCSI2SD_HID.o \
$(BUILD)/hidpacket.o \
-
-# $(BUILD)/Dfu.o \
-# $(BUILD)/dfu.o \
+ $(BUILD)/Dfu.o \
+ $(BUILD)/terminalwx.o \
+ $(BUILD)/terminalinputevent.o \
+ $(BUILD)/wxterm.o \
+ $(BUILD)/gterm.o \
+ $(BUILD)/actions.o \
+ $(BUILD)/keytrans.o \
+ $(BUILD)/states.o \
+ $(BUILD)/utils.o \
+ $(BUILD)/vt52_states.o \
EXEOBJ = \
mkdir -p $(dir $@)
( \
cd $(dir $@) && \
- $(CURDIR)/libusb-1.0.9/configure $(LIBUSB_CONFIG) && \
+ $(CURDIR)/libusb-1.0.20/configure $(LIBUSB_CONFIG) && \
$(MAKE) \
) && \
touch $@
+else
+$(BUILD)/libusb/buildstamp:
+ mkdir -p $(dir $@)
+ touch $@
endif
ifneq ($(USE_SYSTEM_WX),Yes)
$(CXX) $(CPPFLAGS) $(CXXFLAGS) `wx-config-3.0 --cxxflags` $< -c -o $@
endif
+$(BUILD)/%.o: %.cpp
+ mkdir -p $(dir $@)
+ifneq ($(USE_SYSTEM_WX),Yes)
+ $(CXX) $(CPPFLAGS) $(CXXFLAGS) `$(BUILD)/wx/wx-config --cxxflags` $< -c -o $@
+else
+ $(CXX) $(CPPFLAGS) $(CXXFLAGS) `wx-config-3.0 --cxxflags` $< -c -o $@
+endif
+
$(BUILD)/scsi2sd-util6$(EXE): $(OBJ) $(BUILD)/scsi2sd-util.o
mkdir -p $(dir $@)
$(CXX) $(CXXFLAGS) $^ $(LDFLAGS_WX) $(LDFLAGS) -o $@
+all: $(BUILD)/dfu-util/buildstamp
+$(BUILD)/dfu-util/buildstamp: $(BUILD)/libusb/buildstamp
+ mkdir -p $(dir $@)
+ ( \
+ cd $(dir $@) && \
+ $(CURDIR)/dfu-util/configure ${DFU-UTIL_CONFIG} CPPFLAGS="${CPPFLAGS_LIBUSB}" LDFLAGS="${LDFLAGS_LIBUSB} ${LDFLAGS}" && \
+ $(MAKE) \
+ ) && \
+ touch $@
+
clean:
rm $(BUILD)/scsi2sd-util6$(EXE) $(OBJ) $(BUILD)/libzipper/buildstamp
}
bool
-HID::scsiSelfTest()
+HID::scsiSelfTest(int& code)
{
std::vector<uint8_t> cmd { S2S_CMD_SCSITEST };
std::vector<uint8_t> out;
{
return false;
}
+ code = out.size() >= 2 ? out[1] : -1;
return (out.size() >= 1) && (out[0] == S2S_CFG_STATUS_GOOD);
}
std::vector<uint8_t> getSD_CSD();
std::vector<uint8_t> getSD_CID();
- bool scsiSelfTest();
+ bool scsiSelfTest(int& code);
void enterBootloader();
--- /dev/null
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = TerminalWx
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = 0.1
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = doc
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page.
+# This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = src src/taTelnet src/GTerm
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+# If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.
+# Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.
+# The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.
+# Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+# will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT = YES
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.
+# This is useful
+# if you want to understand what is going on.
+# On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME = FreeSans.ttf
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = YES
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
--- /dev/null
+#------------------------------------------------------------------------------#
+# This makefile was generated by 'cbp2make' tool rev.147 #
+#------------------------------------------------------------------------------#
+
+
+WORKDIR = `pwd`
+
+CC = gcc
+CXX = g++
+AR = ar
+LD = g++
+WINDRES = windres
+
+INC =
+CFLAGS = `wx-config --cflags` -Wall
+RESINC =
+LIBDIR =
+LIB =
+LDFLAGS = `wx-config --libs`
+
+INC_DEBUG = $(INC)
+CFLAGS_DEBUG = $(CFLAGS) -g
+RESINC_DEBUG = $(RESINC)
+RCFLAGS_DEBUG = $(RCFLAGS)
+LIBDIR_DEBUG = $(LIBDIR)
+LIB_DEBUG = $(LIB)
+LDFLAGS_DEBUG = $(LDFLAGS)
+OBJDIR_DEBUG = obj/Debug
+DEP_DEBUG =
+OUT_DEBUG = bin/Debug/TestApp
+
+INC_RELEASE = $(INC)
+CFLAGS_RELEASE = $(CFLAGS) -O2
+RESINC_RELEASE = $(RESINC)
+RCFLAGS_RELEASE = $(RCFLAGS)
+LIBDIR_RELEASE = $(LIBDIR)
+LIB_RELEASE = $(LIB)
+LDFLAGS_RELEASE = -s $(LDFLAGS)
+OBJDIR_RELEASE = obj/Release
+DEP_RELEASE =
+OUT_RELEASE = bin/Release/TestApp
+
+OBJ_DEBUG = $(OBJDIR_DEBUG)/src/GTerm/states.o $(OBJDIR_DEBUG)/src/terminalwx.o $(OBJDIR_DEBUG)/src/terminalinputevent.o $(OBJDIR_DEBUG)/src/taTelnet/wxterm.o $(OBJDIR_DEBUG)/src/GTerm/vt52_states.o $(OBJDIR_DEBUG)/src/GTerm/utils.o $(OBJDIR_DEBUG)/TestApp.o $(OBJDIR_DEBUG)/src/GTerm/keytrans.o $(OBJDIR_DEBUG)/src/GTerm/gterm.o $(OBJDIR_DEBUG)/src/GTerm/actions.o $(OBJDIR_DEBUG)/TestMain.o
+
+OBJ_RELEASE = $(OBJDIR_RELEASE)/src/GTerm/states.o $(OBJDIR_RELEASE)/src/terminalwx.o $(OBJDIR_RELEASE)/src/terminalinputevent.o $(OBJDIR_RELEASE)/src/taTelnet/wxterm.o $(OBJDIR_RELEASE)/src/GTerm/vt52_states.o $(OBJDIR_RELEASE)/src/GTerm/utils.o $(OBJDIR_RELEASE)/TestApp.o $(OBJDIR_RELEASE)/src/GTerm/keytrans.o $(OBJDIR_RELEASE)/src/GTerm/gterm.o $(OBJDIR_RELEASE)/src/GTerm/actions.o $(OBJDIR_RELEASE)/TestMain.o
+
+all: debug release
+
+clean: clean_debug clean_release
+
+before_debug:
+ test -d bin/Debug || mkdir -p bin/Debug
+ test -d $(OBJDIR_DEBUG)/src/GTerm || mkdir -p $(OBJDIR_DEBUG)/src/GTerm
+ test -d $(OBJDIR_DEBUG)/src || mkdir -p $(OBJDIR_DEBUG)/src
+ test -d $(OBJDIR_DEBUG)/src/taTelnet || mkdir -p $(OBJDIR_DEBUG)/src/taTelnet
+ test -d $(OBJDIR_DEBUG) || mkdir -p $(OBJDIR_DEBUG)
+
+after_debug:
+
+debug: before_debug out_debug after_debug
+
+out_debug: before_debug $(OBJ_DEBUG) $(DEP_DEBUG)
+ $(LD) $(LIBDIR_DEBUG) -o $(OUT_DEBUG) $(OBJ_DEBUG) $(LDFLAGS_DEBUG) $(LIB_DEBUG)
+
+$(OBJDIR_DEBUG)/src/GTerm/states.o: src/GTerm/states.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/states.cpp -o $(OBJDIR_DEBUG)/src/GTerm/states.o
+
+$(OBJDIR_DEBUG)/src/terminalwx.o: src/terminalwx.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/terminalwx.cpp -o $(OBJDIR_DEBUG)/src/terminalwx.o
+
+$(OBJDIR_DEBUG)/src/terminalinputevent.o: src/terminalinputevent.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/terminalinputevent.cpp -o $(OBJDIR_DEBUG)/src/terminalinputevent.o
+
+$(OBJDIR_DEBUG)/src/taTelnet/wxterm.o: src/taTelnet/wxterm.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/taTelnet/wxterm.cpp -o $(OBJDIR_DEBUG)/src/taTelnet/wxterm.o
+
+$(OBJDIR_DEBUG)/src/GTerm/vt52_states.o: src/GTerm/vt52_states.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/vt52_states.cpp -o $(OBJDIR_DEBUG)/src/GTerm/vt52_states.o
+
+$(OBJDIR_DEBUG)/src/GTerm/utils.o: src/GTerm/utils.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/utils.cpp -o $(OBJDIR_DEBUG)/src/GTerm/utils.o
+
+$(OBJDIR_DEBUG)/TestApp.o: TestApp.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c TestApp.cpp -o $(OBJDIR_DEBUG)/TestApp.o
+
+$(OBJDIR_DEBUG)/src/GTerm/keytrans.o: src/GTerm/keytrans.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/keytrans.cpp -o $(OBJDIR_DEBUG)/src/GTerm/keytrans.o
+
+$(OBJDIR_DEBUG)/src/GTerm/gterm.o: src/GTerm/gterm.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/gterm.cpp -o $(OBJDIR_DEBUG)/src/GTerm/gterm.o
+
+$(OBJDIR_DEBUG)/src/GTerm/actions.o: src/GTerm/actions.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c src/GTerm/actions.cpp -o $(OBJDIR_DEBUG)/src/GTerm/actions.o
+
+$(OBJDIR_DEBUG)/TestMain.o: TestMain.cpp
+ $(CXX) $(CFLAGS_DEBUG) $(INC_DEBUG) -c TestMain.cpp -o $(OBJDIR_DEBUG)/TestMain.o
+
+clean_debug:
+ rm -f $(OBJ_DEBUG) $(OUT_DEBUG)
+ rm -rf bin/Debug
+ rm -rf $(OBJDIR_DEBUG)/src/GTerm
+ rm -rf $(OBJDIR_DEBUG)/src
+ rm -rf $(OBJDIR_DEBUG)/src/taTelnet
+ rm -rf $(OBJDIR_DEBUG)
+
+before_release:
+ test -d bin/Release || mkdir -p bin/Release
+ test -d $(OBJDIR_RELEASE)/src/GTerm || mkdir -p $(OBJDIR_RELEASE)/src/GTerm
+ test -d $(OBJDIR_RELEASE)/src || mkdir -p $(OBJDIR_RELEASE)/src
+ test -d $(OBJDIR_RELEASE)/src/taTelnet || mkdir -p $(OBJDIR_RELEASE)/src/taTelnet
+ test -d $(OBJDIR_RELEASE) || mkdir -p $(OBJDIR_RELEASE)
+
+after_release:
+
+release: before_release out_release after_release
+
+out_release: before_release $(OBJ_RELEASE) $(DEP_RELEASE)
+ $(LD) $(LIBDIR_RELEASE) -o $(OUT_RELEASE) $(OBJ_RELEASE) $(LDFLAGS_RELEASE) $(LIB_RELEASE)
+
+$(OBJDIR_RELEASE)/src/GTerm/states.o: src/GTerm/states.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/states.cpp -o $(OBJDIR_RELEASE)/src/GTerm/states.o
+
+$(OBJDIR_RELEASE)/src/terminalwx.o: src/terminalwx.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/terminalwx.cpp -o $(OBJDIR_RELEASE)/src/terminalwx.o
+
+$(OBJDIR_RELEASE)/src/terminalinputevent.o: src/terminalinputevent.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/terminalinputevent.cpp -o $(OBJDIR_RELEASE)/src/terminalinputevent.o
+
+$(OBJDIR_RELEASE)/src/taTelnet/wxterm.o: src/taTelnet/wxterm.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/taTelnet/wxterm.cpp -o $(OBJDIR_RELEASE)/src/taTelnet/wxterm.o
+
+$(OBJDIR_RELEASE)/src/GTerm/vt52_states.o: src/GTerm/vt52_states.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/vt52_states.cpp -o $(OBJDIR_RELEASE)/src/GTerm/vt52_states.o
+
+$(OBJDIR_RELEASE)/src/GTerm/utils.o: src/GTerm/utils.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/utils.cpp -o $(OBJDIR_RELEASE)/src/GTerm/utils.o
+
+$(OBJDIR_RELEASE)/TestApp.o: TestApp.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c TestApp.cpp -o $(OBJDIR_RELEASE)/TestApp.o
+
+$(OBJDIR_RELEASE)/src/GTerm/keytrans.o: src/GTerm/keytrans.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/keytrans.cpp -o $(OBJDIR_RELEASE)/src/GTerm/keytrans.o
+
+$(OBJDIR_RELEASE)/src/GTerm/gterm.o: src/GTerm/gterm.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/gterm.cpp -o $(OBJDIR_RELEASE)/src/GTerm/gterm.o
+
+$(OBJDIR_RELEASE)/src/GTerm/actions.o: src/GTerm/actions.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c src/GTerm/actions.cpp -o $(OBJDIR_RELEASE)/src/GTerm/actions.o
+
+$(OBJDIR_RELEASE)/TestMain.o: TestMain.cpp
+ $(CXX) $(CFLAGS_RELEASE) $(INC_RELEASE) -c TestMain.cpp -o $(OBJDIR_RELEASE)/TestMain.o
+
+clean_release:
+ rm -f $(OBJ_RELEASE) $(OUT_RELEASE)
+ rm -rf bin/Release
+ rm -rf $(OBJDIR_RELEASE)/src/GTerm
+ rm -rf $(OBJDIR_RELEASE)/src
+ rm -rf $(OBJDIR_RELEASE)/src/taTelnet
+ rm -rf $(OBJDIR_RELEASE)
+
+.PHONY: before_debug after_debug clean_debug before_release after_release clean_release
+
--- /dev/null
+This is a wxWidgets Terminal widget conveniently packaged for you.
+
+For doxygen documentation, see: http://jeremysalwen.github.com/TerminalWx/
+
+TerminalWx is taken (with modifications) from the Chameleon IDE (Mark
+Erikson), which itself took (with modifications) from taTelnet (Derry
+Bryson), which itself took (with modifications) from GTerm (Timothy
+Miller). So this code has a bit of history ;). All credit to those
+before me, the amount I've contributed is relatively nothing.
+
+It is offered under the terms of the wxWindows License Version 3.1,
+which is basically the LGPL version 2+ with an exception for the
+requirement to distribute the source code with binaries. (see
+license3.txt for details of the license).
+
+Dependencies
+-----
+
+You will need wxgtk version 2.9 or later.
+You will also need libwxsmith to compile the test application.
+
--- /dev/null
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
+<CodeBlocks_project_file>
+ <FileVersion major="1" minor="6" />
+ <Project>
+ <Option title="TerminalWx" />
+ <Option pch_mode="2" />
+ <Option compiler="gcc" />
+ <Build>
+ <Target title="Debug">
+ <Option output="bin/Debug/TestApp" prefix_auto="1" extension_auto="1" />
+ <Option object_output="obj/Debug/" />
+ <Option type="0" />
+ <Option compiler="gcc" />
+ <Option projectLinkerOptionsRelation="2" />
+ <Compiler>
+ <Add option="-g" />
+ </Compiler>
+ </Target>
+ <Target title="Release">
+ <Option output="bin/Release/TestApp" prefix_auto="1" extension_auto="1" />
+ <Option object_output="obj/Release/" />
+ <Option type="0" />
+ <Option compiler="gcc" />
+ <Option projectLinkerOptionsRelation="2" />
+ <Compiler>
+ <Add option="-O2" />
+ </Compiler>
+ <Linker>
+ <Add option="-s" />
+ </Linker>
+ </Target>
+ </Build>
+ <Compiler>
+ <Add option="`wx-config --cflags`" />
+ <Add option="-Wall" />
+ </Compiler>
+ <Linker>
+ <Add option="`wx-config --libs`" />
+ </Linker>
+ <Unit filename="TestApp.cpp" />
+ <Unit filename="TestApp.h" />
+ <Unit filename="TestMain.cpp" />
+ <Unit filename="TestMain.h" />
+ <Unit filename="src/GTerm/actions.cpp" />
+ <Unit filename="src/GTerm/gterm.cpp" />
+ <Unit filename="src/GTerm/gterm.hpp" />
+ <Unit filename="src/GTerm/keytrans.cpp" />
+ <Unit filename="src/GTerm/states.cpp" />
+ <Unit filename="src/GTerm/utils.cpp" />
+ <Unit filename="src/GTerm/vt52_states.cpp" />
+ <Unit filename="src/taTelnet/wxterm.cpp" />
+ <Unit filename="src/taTelnet/wxterm.h" />
+ <Unit filename="src/terminalinputevent.cpp" />
+ <Unit filename="src/terminalinputevent.h" />
+ <Unit filename="src/terminalwx.cpp" />
+ <Unit filename="src/terminalwx.h" />
+ <Extensions>
+ <code_completion />
+ <envvars />
+ <wxsmith version="1">
+ <gui name="wxWidgets" src="TerminalWxApp.cpp" main="TerminalWxFrame" init_handlers="necessary" language="CPP" />
+ <resources>
+ <wxFrame wxs="wxsmith/TerminalWxframe.wxs" src="TerminalWxMain.cpp" hdr="TerminalWxMain.h" name="TerminalWxFrame" language="CPP" />
+ </resources>
+ </wxsmith>
+ <lib_finder disable_auto="1" />
+ <debugger />
+ </Extensions>
+ </Project>
+</CodeBlocks_project_file>
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#include "TestApp.h"
+
+//(*AppHeaders
+#include "TestMain.h"
+#include <wx/image.h>
+//*)
+
+IMPLEMENT_APP(TestApp);
+
+bool TestApp::OnInit()
+{
+ //(*AppInitialize
+ bool wxsOK = true;
+ wxInitAllImageHandlers();
+ if ( wxsOK )
+ {
+ TerminalWxFrame* Frame = new TerminalWxFrame(0);
+ Frame->Show();
+ SetTopWindow(Frame);
+ }
+ //*)
+ return wxsOK;
+
+}
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifndef TESTAPP_H
+#define TESTAPP_H
+
+#include <wx/app.h>
+
+class TestApp : public wxApp
+{
+ public:
+ virtual bool OnInit();
+};
+
+#endif // TESTAPP_H
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#include <wx/gdicmn.h>
+#include <wx/menuitem.h>
+#include <wx/utils.h>
+#include <wx/msgdlg.h>
+
+#include "TestMain.h"
+#include "src/terminalinputevent.h"
+
+//(*InternalHeaders(TerminalWxFrame)
+#include <wx/string.h>
+#include <wx/intl.h>
+//*)
+
+//helper functions
+enum wxbuildinfoformat {
+ short_f, long_f };
+
+wxString wxbuildinfo(wxbuildinfoformat format)
+{
+ wxString wxbuild(wxVERSION_STRING);
+
+ if (format == long_f )
+ {
+#if defined(__WXMSW__)
+ wxbuild << _T("-Windows");
+#elif defined(__UNIX__)
+ wxbuild << _T("-Linux");
+#endif
+
+#if wxUSE_UNICODE
+ wxbuild << _T("-Unicode build");
+#else
+ wxbuild << _T("-ANSI build");
+#endif // wxUSE_UNICODE
+ }
+
+ return wxbuild;
+}
+
+//(*IdInit(TerminalWxFrame)
+const long TerminalWxFrame::ID_TERM = wxNewId();
+const long TerminalWxFrame::idMenuQuit = wxNewId();
+const long TerminalWxFrame::idMenuAbout = wxNewId();
+const long TerminalWxFrame::ID_STATUSBAR1 = wxNewId();
+//*)
+
+BEGIN_EVENT_TABLE(TerminalWxFrame,wxFrame)
+ //(*EventTable(TerminalWxFrame)
+ //*)
+END_EVENT_TABLE()
+
+TerminalWxFrame::TerminalWxFrame(wxWindow* parent,wxWindowID id)
+{
+ //(*Initialize(TerminalWxFrame)
+ wxMenuItem* MenuItem2;
+ wxMenuItem* MenuItem1;
+ wxMenu* Menu1;
+ wxMenuBar* MenuBar1;
+ wxMenu* Menu2;
+
+ Create(parent, id, _("Test TerminalWx App"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, _T("id"));
+ Term1 = new TerminalWx(this,ID_TERM,wxPoint(72,56),80,24,_T("ID_TERM"));
+ MenuBar1 = new wxMenuBar();
+ Menu1 = new wxMenu();
+ MenuItem1 = new wxMenuItem(Menu1, idMenuQuit, _("Quit\tAlt-F4"), _("Quit the application"), wxITEM_NORMAL);
+ Menu1->Append(MenuItem1);
+ MenuBar1->Append(Menu1, _("&File"));
+ Menu2 = new wxMenu();
+ MenuItem2 = new wxMenuItem(Menu2, idMenuAbout, _("About\tF1"), _("Show info about this application"), wxITEM_NORMAL);
+ Menu2->Append(MenuItem2);
+ MenuBar1->Append(Menu2, _("Help"));
+ SetMenuBar(MenuBar1);
+ StatusBar1 = new wxStatusBar(this, ID_STATUSBAR1, 0, _T("ID_STATUSBAR1"));
+ int __wxStatusBarWidths_1[1] = { -1 };
+ int __wxStatusBarStyles_1[1] = { wxSB_NORMAL };
+ StatusBar1->SetFieldsCount(1,__wxStatusBarWidths_1);
+ StatusBar1->SetStatusStyles(1,__wxStatusBarStyles_1);
+ SetStatusBar(StatusBar1);
+
+ Connect(idMenuQuit,wxEVT_COMMAND_MENU_SELECTED,(wxObjectEventFunction)&TerminalWxFrame::OnQuit);
+ Connect(idMenuAbout,wxEVT_COMMAND_MENU_SELECTED,(wxObjectEventFunction)&TerminalWxFrame::OnAbout);
+ Connect(wxID_ANY,wxEVT_CLOSE_WINDOW,(wxObjectEventFunction)&TerminalWxFrame::OnClose);
+ //*)
+}
+
+TerminalWxFrame::~TerminalWxFrame()
+{
+ //(*Destroy(TerminalWxFrame)
+ //*)
+}
+
+void TerminalWxFrame::OnQuit(wxCommandEvent& event)
+{
+ Close();
+}
+
+void TerminalWxFrame::OnAbout(wxCommandEvent& event)
+{
+ wxString msg = wxbuildinfo(long_f);
+ wxMessageBox(msg, _("Welcome to..."));
+
+ Term1->DisplayCharsUnsafe(msg);
+}
+
+void TerminalWxFrame::OnClose(wxCloseEvent& event)
+{
+ Destroy();
+}
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifndef TESTMAIN_H
+#define TESTMAIN_H
+
+//(*Headers(TerminalWxFrame)
+#include <wx/menu.h>
+#include <wx/statusbr.h>
+#include <wx/frame.h>
+//*)
+
+#include <wx/event.h>
+#include <wx/window.h>
+
+#include "src/terminalwx.h"
+
+class TerminalWxFrame: public wxFrame
+{
+ public:
+
+ TerminalWxFrame(wxWindow* parent,wxWindowID id = -1);
+ virtual ~TerminalWxFrame();
+
+ private:
+
+ //(*Handlers(TerminalWxFrame)
+ void OnQuit(wxCommandEvent& event);
+ void OnAbout(wxCommandEvent& event);
+ void OnClose(wxCloseEvent& event);
+ void OnCustom1Paint(wxPaintEvent& event);
+ //*)
+
+ //(*Identifiers(TerminalWxFrame)
+ static const long ID_TERM;
+ static const long idMenuQuit;
+ static const long idMenuAbout;
+ static const long ID_STATUSBAR1;
+ //*)
+
+ //(*Declarations(TerminalWxFrame)
+ wxStatusBar* StatusBar1;
+ TerminalWx* Term1;
+ //*)
+
+ DECLARE_EVENT_TABLE()
+};
+
+#endif // TERMINALWXMAIN_H
--- /dev/null
+ GNU LIBRARY GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the library GPL. It is
+ numbered 2 because it goes with version 2 of the ordinary GPL.]
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+ This license, the Library General Public License, applies to some
+specially designated Free Software Foundation software, and to any
+other libraries whose authors decide to use it. You can use it for
+your libraries, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if
+you distribute copies of the library, or if you modify it.
+
+ For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you. You must make sure that they, too, receive or can get the source
+code. If you link a program with the library, you must provide
+complete object files to the recipients so that they can relink them
+with the library, after making changes to the library and recompiling
+it. And you must show them these terms so they know their rights.
+
+ Our method of protecting your rights has two steps: (1) copyright
+the library, and (2) offer you this license which gives you legal
+permission to copy, distribute and/or modify the library.
+
+ Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this free
+library. If the library is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original
+version, so that any problems introduced by others will not reflect on
+the original authors' reputations.
+\f
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that companies distributing free
+software will individually obtain patent licenses, thus in effect
+transforming the program into proprietary software. To prevent this,
+we have made it clear that any patent must be licensed for everyone's
+free use or not licensed at all.
+
+ Most GNU software, including some libraries, is covered by the ordinary
+GNU General Public License, which was designed for utility programs. This
+license, the GNU Library General Public License, applies to certain
+designated libraries. This license is quite different from the ordinary
+one; be sure to read it in full, and don't assume that anything in it is
+the same as in the ordinary license.
+
+ The reason we have a separate public license for some libraries is that
+they blur the distinction we usually make between modifying or adding to a
+program and simply using it. Linking a program with a library, without
+changing the library, is in some sense simply using the library, and is
+analogous to running a utility program or application program. However, in
+a textual and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General Public License
+treats it as such.
+
+ Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote software
+sharing, because most developers did not use the libraries. We
+concluded that weaker conditions might promote sharing better.
+
+ However, unrestricted linking of non-free programs would deprive the
+users of those programs of all benefit from the free status of the
+libraries themselves. This Library General Public License is intended to
+permit developers of non-free programs to use free libraries, while
+preserving your freedom as a user of such programs to change the free
+libraries that are incorporated in them. (We have not seen how to achieve
+this as regards changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.) The hope is that this
+will lead to faster development of free libraries.
+
+ The precise terms and conditions for copying, distribution and
+modification follow. Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library". The
+former contains code derived from the library, while the latter only
+works together with the library.
+
+ Note that it is possible for a library to be covered by the ordinary
+General Public License rather than by this special one.
+\f
+ GNU LIBRARY GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Library
+General Public License (also called "this License"). Each licensee is
+addressed as "you".
+
+ A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+ The "Library", below, refers to any such software library or work
+which has been distributed under these terms. A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language. (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+ "Source code" for a work means the preferred form of the work for
+making modifications to it. For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+ Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it). Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+ 1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+ You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+\f
+ 2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) The modified work must itself be a software library.
+
+ b) You must cause the files modified to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ c) You must cause the whole of the work to be licensed at no
+ charge to all third parties under the terms of this License.
+
+ d) If a facility in the modified Library refers to a function or a
+ table of data to be supplied by an application program that uses
+ the facility, other than as an argument passed when the facility
+ is invoked, then you must make a good faith effort to ensure that,
+ in the event an application does not supply such function or
+ table, the facility still operates, and performs whatever part of
+ its purpose remains meaningful.
+
+ (For example, a function in a library to compute square roots has
+ a purpose that is entirely well-defined independent of the
+ application. Therefore, Subsection 2d requires that any
+ application-supplied function or table used by this function must
+ be optional: if the application does not supply it, the square
+ root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library. To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License. (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.) Do not make any other change in
+these notices.
+\f
+ Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+ This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+ 4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+ If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library". Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+ However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library". The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+ When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library. The
+threshold for this to be true is not precisely defined by law.
+
+ If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work. (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+ Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+\f
+ 6. As an exception to the Sections above, you may also compile or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+ You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License. You must supply a copy of this License. If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License. Also, you must do one
+of these things:
+
+ a) Accompany the work with the complete corresponding
+ machine-readable source code for the Library including whatever
+ changes were used in the work (which must be distributed under
+ Sections 1 and 2 above); and, if the work is an executable linked
+ with the Library, with the complete machine-readable "work that
+ uses the Library", as object code and/or source code, so that the
+ user can modify the Library and then relink to produce a modified
+ executable containing the modified Library. (It is understood
+ that the user who changes the contents of definitions files in the
+ Library will not necessarily be able to recompile the application
+ to use the modified definitions.)
+
+ b) Accompany the work with a written offer, valid for at
+ least three years, to give the same user the materials
+ specified in Subsection 6a, above, for a charge no more
+ than the cost of performing this distribution.
+
+ c) If distribution of the work is made by offering access to copy
+ from a designated place, offer equivalent access to copy the above
+ specified materials from the same place.
+
+ d) Verify that the user has already received a copy of these
+ materials or that you have already sent this user a copy.
+
+ For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it. However, as a special exception,
+the source code distributed need not include anything that is normally
+distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+ It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system. Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+\f
+ 7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+ a) Accompany the combined library with a copy of the same work
+ based on the Library, uncombined with any other library
+ facilities. This must be distributed under the terms of the
+ Sections above.
+
+ b) Give prominent notice with the combined library of the fact
+ that part of it is a work based on the Library, and explaining
+ where to find the accompanying uncombined form of the same work.
+
+ 8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License. Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License. However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+ 9. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Library or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+ 10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+\f
+ 11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all. For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded. In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+ 13. The Free Software Foundation may publish revised and/or new
+versions of the Library General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation. If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+\f
+ 14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission. For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this. Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+ NO WARRANTY
+
+ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Libraries
+
+ If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change. You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+ To apply these terms, attach the following notices to the library. It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the library's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+ <signature of Ty Coon>, 1 April 1990
+ Ty Coon, President of Vice
+
+That's all there is to it!
--- /dev/null
+ wxWindows Library Licence, Version 3.1
+ ======================================
+
+ Copyright (C) 1998-2005 Julian Smart, Robert Roebling et al
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this licence document, but changing it is not allowed.
+
+ WXWINDOWS LIBRARY LICENCE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ This library is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public Licence as published by
+ the Free Software Foundation; either version 2 of the Licence, or (at
+ your option) any later version.
+
+ This library is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library
+ General Public Licence for more details.
+
+ You should have received a copy of the GNU Library General Public Licence
+ along with this software, usually in a file named COPYING.LIB. If not,
+ write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA.
+
+ EXCEPTION NOTICE
+
+ 1. As a special exception, the copyright holders of this library give
+ permission for additional uses of the text contained in this release of
+ the library as licenced under the wxWindows Library Licence, applying
+ either version 3.1 of the Licence, or (at your option) any later version of
+ the Licence as published by the copyright holders of version
+ 3.1 of the Licence document.
+
+ 2. The exception is that you may use, copy, link, modify and distribute
+ under your own terms, binary object code versions of works based
+ on the Library.
+
+ 3. If you copy code from files distributed under the terms of the GNU
+ General Public Licence or the GNU Library General Public Licence into a
+ copy of this library, as this licence permits, the exception does not
+ apply to the code that you add in this way. To avoid misleading anyone as
+ to the status of such modified files, you must delete this exception
+ notice from such code and/or adjust the licensing conditions notice
+ accordingly.
+
+ 4. If you write modifications of your own for this library, it is your
+ choice whether to permit this exception to apply to your modifications.
+ If you do not wish that, you must delete the exception notice from such
+ code and/or adjust the licensing conditions notice accordingly.
+
+
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#include "gterm.hpp"
+
+
+// For efficiency, this grabs all printing characters from buffer, up to
+// the end of the line or end of buffer
+void GTerm::normal_input()
+{
+ int n, n_taken, i, c, y;
+#if 0
+char str[100];
+#endif
+
+#define IS_CTRL_CHAR(c) ((c)<32 || (c) ==127)
+
+ if (IS_CTRL_CHAR(*input_data)) return;
+
+ if (cursor_x >= width) {
+ if (mode_flags & NOEOLWRAP) {
+ cursor_x = width-1;
+ } else {
+ next_line();
+ }
+ }
+
+ n = 0;
+ if (mode_flags & NOEOLWRAP) {
+ while (!IS_CTRL_CHAR(input_data[n]) && n<data_len) n++;
+ n_taken = n;
+ if (cursor_x+n>=width) n = width-cursor_x;
+ } else {
+ while (!IS_CTRL_CHAR(input_data[n]) && n<data_len && cursor_x+n<width) n++;
+ n_taken = n;
+ }
+
+#if 0
+memcpy(str, input_data, n);
+str[n] = 0;
+//printf("Processing %d characters (%d): %s\n", n, str[0], str);
+#endif
+
+ if (mode_flags & INSERT) {
+ changed_line(cursor_y, cursor_x, width-1);
+ } else {
+ changed_line(cursor_y, cursor_x, cursor_x+n-1);
+ }
+
+ y = linenumbers[cursor_y]*MAXWIDTH;
+ if (mode_flags & INSERT) for (i=width-1; i>=cursor_x+n; i--) {
+ text[y+i] = text[y+i-n];
+ color[y+i] = color[y+i-n];
+ }
+
+ c = calc_color(fg_color, bg_color, mode_flags);
+ for (i=0; i<n; i++) {
+ text[y+cursor_x] = input_data[i];
+ color[y+cursor_x] = c;
+ cursor_x++;
+ }
+
+ input_data += n_taken-1;
+ data_len -= n_taken-1;
+}
+
+void GTerm::cr()
+{
+ move_cursor(0, cursor_y);
+}
+
+void GTerm::lf()
+{
+ if (cursor_y < scroll_bot) {
+ move_cursor(cursor_x, cursor_y+1);
+ } else {
+ scroll_region(scroll_top, scroll_bot, 1);
+ }
+}
+
+void GTerm::ff()
+{
+ clear_area(0, scroll_top, width-1, scroll_bot);
+ move_cursor(0, scroll_top);
+}
+
+void GTerm::tab()
+{
+ int i, x = 0;
+
+ for (i=cursor_x+1; i<width && !x; i++) if (tab_stops[i]) x = i;
+ if (!x) x = (cursor_x+8) & -8;
+ if (x < width) {
+ move_cursor(x, cursor_y);
+ } else {
+ if (mode_flags & NOEOLWRAP) {
+ move_cursor(width-1, cursor_y);
+ } else {
+ next_line();
+ }
+ }
+}
+
+void GTerm::bs()
+{
+ if (cursor_x>0) move_cursor(cursor_x-1, cursor_y);
+ if (mode_flags & DESTRUCTBS) {
+ clear_area(cursor_x, cursor_y, cursor_x, cursor_y);
+ }
+}
+
+void GTerm::bell()
+{
+ Bell();
+}
+
+void GTerm::clear_param()
+{
+ nparam = 0;
+ memset(param, 0, sizeof(param));
+ q_mode = 0;
+ got_param = 0;
+}
+
+void GTerm::keypad_numeric() { clear_mode_flag(KEYAPPMODE); }
+void GTerm::keypad_application() { set_mode_flag(KEYAPPMODE); }
+
+void GTerm::save_cursor()
+{
+ save_attrib = mode_flags;
+ save_x = cursor_x;
+ save_y = cursor_y;
+}
+
+void GTerm::restore_cursor()
+{
+ mode_flags = (mode_flags & ~15) | (save_attrib & 15);
+ move_cursor(save_x, save_y);
+}
+
+void GTerm::set_tab()
+{
+ tab_stops[cursor_x] = 1;
+}
+
+void GTerm::index_down()
+{
+ lf();
+}
+
+void GTerm::next_line()
+{
+ lf(); cr();
+}
+
+void GTerm::index_up()
+{
+ if (cursor_y > scroll_top) {
+ move_cursor(cursor_x, cursor_y-1);
+ } else {
+ scroll_region(scroll_top, scroll_bot, -1);
+ }
+}
+
+void GTerm::reset()
+{
+ int i;
+
+ pending_scroll = 0;
+ bg_color = 0;
+ fg_color = 7;
+ scroll_top = 0;
+ scroll_bot = height-1;
+ for (i=0; i<MAXHEIGHT; i++) linenumbers[i] = i;
+ memset(tab_stops, 0, sizeof(tab_stops));
+ current_state = GTerm::normal_state;
+
+ clear_mode_flag(NOEOLWRAP | CURSORAPPMODE | CURSORRELATIVE |
+ NEWLINE | INSERT | UNDERLINE | BLINK | KEYAPPMODE |
+ CURSORINVISIBLE);
+
+ clear_area(0, 0, width-1, height-1);
+ move_cursor(0, 0);
+}
+
+void GTerm::set_q_mode()
+{
+ q_mode = 1;
+}
+
+// The verification test used some strange sequence which was
+// ^[[61"p
+// in a function called set_level,
+// but it didn't explain the meaning. Just in case I ever find out,
+// and just so that it doesn't leave garbage on the screen, I accept
+// the quote and mark a flag.
+void GTerm::set_quote_mode()
+{
+ quote_mode = 1;
+}
+
+// for performance, this grabs all digits
+void GTerm::param_digit()
+{
+ got_param = 1;
+ param[nparam] = param[nparam]*10 + (*input_data)-'0';
+}
+
+void GTerm::next_param()
+{
+ nparam++;
+}
+
+void GTerm::cursor_left()
+{
+ int n, x;
+ n = param[0]; if (n<1) n = 1;
+ x = cursor_x-n; if (x<0) x = 0;
+ move_cursor(x, cursor_y);
+}
+
+void GTerm::cursor_right()
+{
+ int n, x;
+ n = param[0]; if (n<1) n = 1;
+ x = cursor_x+n; if (x>=width) x = width-1;
+ move_cursor(x, cursor_y);
+}
+
+void GTerm::cursor_up()
+{
+ int n, y;
+ n = param[0]; if (n<1) n = 1;
+ y = cursor_y-n; if (y<0) y = 0;
+ move_cursor(cursor_x, y);
+}
+
+void GTerm::cursor_down()
+{
+ int n, y;
+ n = param[0]; if (n<1) n = 1;
+ y = cursor_y+n; if (y>=height) y = height-1;
+ move_cursor(cursor_x, y);
+}
+
+void GTerm::cursor_position()
+{
+ int x, y;
+ x = param[1]; if (x<1) x=1;
+ y = param[0]; if (y<1) y=1;
+ if (mode_flags & CURSORRELATIVE) {
+ move_cursor(x-1, y-1+scroll_top);
+ } else {
+ move_cursor(x-1, y-1);
+ }
+}
+
+void GTerm::device_attrib()
+{
+ char *str = "\033[?1;2c";
+ ProcessOutput(strlen(str), (unsigned char *)str);
+}
+
+void GTerm::delete_char()
+{
+ int n, mx;
+ n = param[0]; if (n<1) n = 1;
+ mx = width-cursor_x;
+ if (n>=mx) {
+ clear_area(cursor_x, cursor_y, width-1, cursor_y);
+ } else {
+ shift_text(cursor_y, cursor_x, width-1, -n);
+ }
+}
+
+void GTerm::set_mode() // h
+{
+ switch (param[0] + 1000*q_mode) {
+ case 1007: clear_mode_flag(NOEOLWRAP); break;
+ case 1001: set_mode_flag(CURSORAPPMODE); break;
+ case 1006: set_mode_flag(CURSORRELATIVE); break;
+ case 4: set_mode_flag(INSERT); break;
+ case 1003: RequestSizeChange(132, height); break;
+ case 20: set_mode_flag(NEWLINE); break;
+ case 12: clear_mode_flag(LOCALECHO); break;
+ case 1025:
+ clear_mode_flag(CURSORINVISIBLE);
+ move_cursor(cursor_x, cursor_y);
+ break;
+ }
+}
+
+void GTerm::clear_mode() // l
+{
+ switch (param[0] + 1000*q_mode) {
+ case 1007: set_mode_flag(NOEOLWRAP); break;
+ case 1001: clear_mode_flag(CURSORAPPMODE); break;
+ case 1006: clear_mode_flag(CURSORRELATIVE); break;
+ case 4: clear_mode_flag(INSERT); break;
+ case 1003: RequestSizeChange(80, height); break;
+ case 20: clear_mode_flag(NEWLINE); break;
+ case 1002: current_state = vt52_normal_state; break;
+ case 12: set_mode_flag(LOCALECHO); break;
+ case 1025:
+ set_mode_flag(CURSORINVISIBLE); break;
+ move_cursor(cursor_x, cursor_y);
+ break;
+ }
+}
+
+void GTerm::request_param()
+{
+ char str[40];
+ sprintf(str, "\033[%d;1;1;120;120;1;0x", param[0]+2);
+ ProcessOutput(strlen(str), (unsigned char *)str);
+}
+
+void GTerm::set_margins()
+{
+ int t, b;
+
+ t = param[0];
+ if (t<1) t = 1;
+ b = param[1];
+ if (b<1) b = height;
+
+ if (pending_scroll) update_changes();
+
+ scroll_top = t-1;
+ scroll_bot = b-1;
+ if (cursor_y < scroll_top) move_cursor(cursor_x, scroll_top);
+ if (cursor_y > scroll_bot) move_cursor(cursor_x, scroll_bot);
+}
+
+void GTerm::delete_line()
+{
+ int n, mx;
+ n = param[0]; if (n<1) n = 1;
+ mx = scroll_bot-cursor_y+1;
+ if (n>=mx) {
+ clear_area(0, cursor_y, width-1, scroll_bot);
+ } else {
+ scroll_region(cursor_y, scroll_bot, n);
+ }
+}
+
+void GTerm::status_report()
+{
+ char str[20];
+ if (param[0] == 5) {
+ char *str = "\033[0n";
+ ProcessOutput(strlen(str), (unsigned char *)str);
+ } else if (param[0] == 6) {
+ sprintf(str, "\033[%d;%dR", cursor_y+1, cursor_x+1);
+ ProcessOutput(strlen(str), (unsigned char *)str);
+ }
+}
+
+void GTerm::erase_display()
+{
+ switch (param[0]) {
+ case 0:
+ clear_area(cursor_x, cursor_y, width-1, cursor_y);
+ if (cursor_y<height-1)
+ clear_area(0, cursor_y+1, width-1, height-1);
+ break;
+ case 1:
+ clear_area(0, cursor_y, cursor_x, cursor_y);
+ if (cursor_y>0)
+ clear_area(0, 0, width-1, cursor_y-1);
+ break;
+ case 2:
+ clear_area(0, 0, width-1, height-1);
+ break;
+ }
+}
+
+void GTerm::erase_line()
+{
+ switch (param[0]) {
+ case 0:
+ clear_area(cursor_x, cursor_y, width-1, cursor_y);
+ break;
+ case 1:
+ clear_area(0, cursor_y, cursor_x, cursor_y);
+ break;
+ case 2:
+ clear_area(0, cursor_y, width-1, cursor_y);
+ break;
+ }
+}
+
+void GTerm::insert_line()
+{
+ int n, mx;
+ n = param[0]; if (n<1) n = 1;
+ mx = scroll_bot-cursor_y+1;
+ if (n>=mx) {
+ clear_area(0, cursor_y, width-1, scroll_bot);
+ } else {
+ scroll_region(cursor_y, scroll_bot, -n);
+ }
+}
+
+void GTerm::set_colors()
+{
+ int n;
+
+ if (!nparam && param[0] == 0) {
+ clear_mode_flag(15);
+ fg_color = 7;
+ bg_color = 0;
+ return;
+ }
+
+ for (n=0; n<=nparam; n++) {
+ if (param[n]/10 == 4) {
+ bg_color = param[n]%10;
+ } else if (param[n]/10 == 3) {
+ fg_color = param[n]%10;
+ } else switch (param[n]) {
+ case 0:
+ clear_mode_flag(15);
+ fg_color = 7;
+ bg_color = 0;
+ break;
+ case 1:
+ set_mode_flag(BOLD);
+ break;
+ case 4:
+ set_mode_flag(UNDERLINE);
+ break;
+ case 5:
+ set_mode_flag(BLINK);
+ break;
+ case 7:
+ set_mode_flag(INVERSE);
+ break;
+ }
+ }
+}
+
+void GTerm::clear_tab()
+{
+ if (param[0] == 3) {
+ memset(tab_stops, 0, sizeof(tab_stops));
+ } else if (param[0] == 0) {
+ tab_stops[cursor_x] = 0;
+ }
+}
+
+void GTerm::insert_char()
+{
+ int n, mx;
+ n = param[0]; if (n<1) n = 1;
+ mx = width-cursor_x;
+ if (n>=mx) {
+ clear_area(cursor_x, cursor_y, width-1, cursor_y);
+ } else {
+ shift_text(cursor_y, cursor_x, width-1, n);
+ }
+}
+
+void GTerm::screen_align()
+{
+ int y, yp, x, c;
+
+ c = calc_color(7, 0, 0);
+ for (y=0; y<height; y++) {
+ yp = linenumbers[y]*MAXWIDTH;
+ changed_line(y, 0, width-1);
+ for (x=0; x<width; x++) {
+ text[yp+x] = 'E';
+ color[yp+x] = c;
+ }
+ }
+}
+
+void GTerm::erase_char()
+{
+ int n, mx;
+ n = param[0]; if (n<1) n = 1;
+ mx = width-cursor_x;
+ if (n>mx) n = mx;
+ clear_area(cursor_x, cursor_y, cursor_x+n-1, cursor_y);
+}
+
+void GTerm::vt52_cursory()
+{
+ // store y coordinate
+ param[0] = (*input_data) - 32;
+ if (param[0]<0) param[0] = 0;
+ if (param[0]>=height) param[0] = height-1;
+}
+
+void GTerm::vt52_cursorx()
+{
+ int x;
+ x = (*input_data)-32;
+ if (x<0) x = 0;
+ if (x>=width) x = width-1;
+ move_cursor(x, param[0]);
+}
+
+void GTerm::vt52_ident()
+{
+ char *str = "\033/Z";
+ ProcessOutput(strlen(str), (unsigned char *)str);
+}
+
+
+#ifdef GTERM_PC
+
+void GTerm::pc_begin(void)
+{
+//printf("pc_begin...\n");
+ set_mode_flag(PC);
+//printf("pc_begin: mode_flags = %x\n", mode_flags);
+ ProcessOutput((unsigned int)strlen(pc_machinename) + 1, (unsigned char *)pc_machinename);
+ pc_oldWidth = Width();
+ pc_oldHeight = Height();
+ ResizeTerminal(80, 25);
+ update_changes();
+}
+
+void GTerm::pc_end(void)
+{
+// printf("pc_end...\n");
+ clear_mode_flag(PC);
+ ResizeTerminal(pc_oldWidth, pc_oldHeight);
+ update_changes();
+}
+
+void GTerm::pc_cmd(void)
+{
+ pc_curcmd = *input_data;
+//printf("pc_cmd: pc_curcmd = %d...\n", pc_curcmd);
+ pc_argcount = 0;
+ switch(pc_curcmd)
+ {
+ case GTERM_PC_CMD_CURONOFF : // <on/off>
+ pc_numargs = 1;
+ break;
+
+ case GTERM_PC_CMD_MOVECURSOR : // <x> <y>
+ pc_numargs = 2;
+ break;
+
+ case GTERM_PC_CMD_PUTTEXT : // <x> <y> <wid> <len>
+ pc_numargs = 4;
+ break;
+
+ case GTERM_PC_CMD_WRITE : // <x> <y> <wid> <attr>
+ pc_numargs = 4;
+ break;
+
+ case GTERM_PC_CMD_MOVETEXT : // <sx> <sy> <wid> <len> <dx> <dy>
+ pc_numargs = 6;
+ break;
+
+ case GTERM_PC_CMD_BEEP :
+ Bell();
+ break;
+
+ case GTERM_PC_CMD_SELECTPRINTER :
+ pc_numargs = 1;
+ break;
+
+ case GTERM_PC_CMD_PRINTCHAR :
+ pc_numargs = 1;
+ break;
+
+ case GTERM_PC_CMD_PRINTCHARS :
+ pc_numargs = 2;
+ break;
+
+ default :
+ current_state = pc_cmd_state;
+ break;
+ }
+}
+
+void GTerm::pc_arg(void)
+{
+ int
+ i,
+ yp,
+ yp2;
+
+//printf("pc_arg: pc_curcmd = %d...\n", pc_curcmd);
+
+ pc_args[pc_argcount++] = *input_data;
+ if(pc_argcount == pc_numargs)
+ {
+ switch(pc_curcmd)
+ {
+ case GTERM_PC_CMD_CURONOFF :
+//printf("pc_arg: curonoff got %d\n", *input_data);
+ if(*input_data)
+ clear_mode_flag(CURSORINVISIBLE);
+ else
+ set_mode_flag(CURSORINVISIBLE);
+ current_state = pc_cmd_state;
+ changed_line(cursor_y, cursor_x, cursor_x);
+ break;
+
+ case GTERM_PC_CMD_MOVECURSOR :
+//printf("pc_arg: movecursor (%d, %d)\n", pc_args[0], pc_args[1]);
+ move_cursor(pc_args[0], pc_args[1]);
+ current_state = pc_cmd_state;
+ break;
+
+ case GTERM_PC_CMD_PUTTEXT :
+//printf("pc_arg: puttext got %d, %d, %d, %d\n", pc_args[0], pc_args[1], pc_args[2], pc_args[3]);
+ pc_numdata = pc_args[2] * pc_args[3] * 2;
+ pc_datacount = 0;
+ pc_curx = pc_args[0];
+ pc_cury = pc_args[1];
+ if(pc_numdata)
+ current_state = pc_data_state;
+ else
+ current_state = pc_cmd_state;
+ break;
+
+ case GTERM_PC_CMD_WRITE :
+//printf("pc_arg: write got %d, %d, %d, %d\n", pc_args[0], pc_args[1], pc_args[2], pc_args[3]);
+ pc_numdata = pc_args[2];
+ pc_datacount = 0;
+ pc_curx = pc_args[0];
+ pc_cury = pc_args[1];
+ if(pc_numdata)
+ current_state = pc_data_state;
+ else
+ current_state = pc_cmd_state;
+ break;
+
+ case GTERM_PC_CMD_MOVETEXT : // <sx> <sy> <wid> <len> <dx> <dy>
+ if(pc_args[1] < pc_args[5])
+ {
+ for(i = 0; i < pc_args[3]; i++)
+ {
+ yp = linenumbers[pc_args[1] + i] * MAXWIDTH;
+ yp2 = linenumbers[pc_args[5] + i] * MAXWIDTH;
+ memmove(&text[yp2 + pc_args[4]], &text[yp + pc_args[0]], pc_args[2]);
+ memmove(&color[yp2 + pc_args[4]], &color[yp + pc_args[0]], pc_args[2]);
+ changed_line(pc_args[5] + i, pc_args[4], pc_args[4] + pc_args[2] - 1);
+ }
+ }
+ else
+ {
+ for(i = pc_args[3] - 1; i >= 0; i--)
+ {
+ yp = linenumbers[pc_args[1] + i] * MAXWIDTH;
+ yp2 = linenumbers[pc_args[5] + i] * MAXWIDTH;
+ memmove(&text[yp2 + pc_args[4]], &text[yp + pc_args[0]], pc_args[2]);
+ memmove(&color[yp2 + pc_args[4]], &color[yp + pc_args[0]], pc_args[2]);
+ changed_line(pc_args[5] + i, pc_args[4], pc_args[4] + pc_args[2] - 1);
+ }
+ }
+ current_state = pc_cmd_state;
+ break;
+
+ case GTERM_PC_CMD_SELECTPRINTER :
+ pc_numdata = pc_args[0];
+ pc_datacount = 0;
+ memset(pc_printername, 0, sizeof(pc_printername));
+ if(pc_numdata)
+ current_state = pc_data_state;
+ else
+ {
+ SelectPrinter("");
+ current_state = pc_cmd_state;
+ }
+ break;
+
+ case GTERM_PC_CMD_PRINTCHAR :
+ PrintChars(1, &pc_args[0]);
+ current_state = pc_cmd_state;
+ break;
+
+ case GTERM_PC_CMD_PRINTCHARS :
+ pc_numdata = (pc_args[0] << 8) + pc_args[1];
+ pc_datacount = 0;
+ if(pc_numdata)
+ current_state = pc_data_state;
+ else
+ current_state = pc_cmd_state;
+ break;
+ }
+ }
+}
+
+void GTerm::pc_data(void)
+{
+ int
+ yp;
+
+//printf("pc_data: pc_curcmd = %d, pc_datacount = %d, pc_numdata = %d, pc_curx = %d, pc_cur_y = %d...\n", pc_curcmd, pc_datacount, pc_numdata, pc_curx, pc_cury);
+ switch(pc_curcmd)
+ {
+ case GTERM_PC_CMD_PUTTEXT :
+ yp = linenumbers[pc_cury] * MAXWIDTH;
+ if(!(pc_datacount & 1))
+ {
+//printf("pc_data: got char %d\n", *input_data);
+ text[yp + pc_curx] = *input_data;
+ }
+ else
+ {
+//printf("pc_data: got attr %d\n", *input_data);
+ color[yp + pc_curx] = *input_data << 4;
+ }
+ if(pc_datacount & 1)
+ {
+ changed_line(pc_cury, pc_args[0], pc_curx);
+ pc_curx++;
+ if(pc_curx == pc_args[0] + pc_args[2])
+ {
+ pc_curx = pc_args[0];
+ pc_cury++;
+ }
+ }
+ break;
+
+ case GTERM_PC_CMD_WRITE :
+ yp = linenumbers[pc_cury] * MAXWIDTH;
+ text[yp + pc_curx] = *input_data;
+ color[yp + pc_curx] = (unsigned short)pc_args[3] << 4;
+ changed_line(pc_cury, pc_args[0], pc_curx);
+ pc_curx++;
+ break;
+
+ case GTERM_PC_CMD_SELECTPRINTER :
+ if(pc_datacount < GTERM_PC_MAXPRINTERNAME - 1)
+ pc_printername[pc_datacount] = *input_data;
+ if(pc_datacount == pc_numdata - 1)
+ SelectPrinter(pc_printername);
+ break;
+
+ case GTERM_PC_CMD_PRINTCHARS :
+ PrintChars(1, input_data);
+ break;
+ }
+
+ pc_datacount++;
+ if(pc_datacount == pc_numdata)
+ current_state = pc_cmd_state;
+}
+
+#endif // GTERM_PC
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifdef __GNUG__
+ #pragma implementation "gterm.hpp"
+#endif
+
+#include "gterm.hpp"
+#include <algorithm>
+
+using namespace std;
+
+void GTerm::Update()
+{
+ update_changes();
+}
+
+void GTerm::ProcessInput(int len, unsigned char *data)
+{
+//printf("ProcessInput called...\n");
+ int i;
+ StateOption *last_state;
+
+ data_len = len;
+ input_data = data;
+
+ while (data_len) {
+//printf("ProcessInput() processing %d...\n", *input_data);
+ i = 0;
+ while (current_state[i].byte != -1 &&
+ current_state[i].byte != *input_data) i++;
+
+ // action must be allowed to redirect state change
+ last_state = current_state+i;
+ current_state = last_state->next_state;
+ if (last_state->action)
+ (this->*(last_state->action))();
+ input_data++;
+ data_len--;
+ }
+
+ if (!(mode_flags & DEFERUPDATE) ||
+ (pending_scroll > scroll_bot-scroll_top)) update_changes();
+}
+
+void GTerm::Reset()
+{
+ reset();
+}
+
+void GTerm::ExposeArea(int x, int y, int w, int h)
+{
+ int i;
+ for (i=0; i<h; i++) changed_line(i+y, x, x+w-1);
+ if (!(mode_flags & DEFERUPDATE)) update_changes();
+}
+
+void GTerm::ResizeTerminal(int w, int h)
+{
+ int cx, cy;
+ clear_area(min(width,w), 0, MAXWIDTH-1, MAXHEIGHT-1);
+ clear_area(0, min(height,h), min(width,w)-1, MAXHEIGHT-1);
+ width = w;
+ height = h;
+ scroll_bot = height-1;
+ if (scroll_top >= height) scroll_top = 0;
+ cx = min(width-1, cursor_x);
+ cy = min(height-1, cursor_y);
+ move_cursor(cx, cy);
+}
+
+GTerm::GTerm(int w, int h) : width(w), height(h)
+{
+ int i;
+
+ doing_update = 0;
+
+ // could make this dynamic
+ text = new unsigned char[MAXWIDTH*MAXHEIGHT];
+ color = new unsigned short[MAXWIDTH*MAXHEIGHT];
+
+ for (i=0; i<MAXHEIGHT; i++) {
+ // make it draw whole terminal to start
+ dirty_startx[i] = 0;
+ dirty_endx[i] = MAXWIDTH-1;
+ }
+
+#ifdef GTERM_PC
+ pc_machinename = new char[7];
+ strcpy(pc_machinename, "pcterm");
+#endif
+ cursor_x = 0;
+ cursor_y = 0;
+ save_x = 0;
+ save_y = 0;
+ mode_flags = 0;
+ reset();
+}
+
+GTerm::~GTerm()
+{
+ delete text;
+ delete color;
+#ifdef GTERM_PC
+ if(pc_machinename)
+ delete pc_machinename;
+#endif // GTERM_PC
+}
+
+#ifdef GTERM_PC
+void
+GTerm::SetMachineName(char *machinename)
+{
+ if(pc_machinename)
+ delete pc_machinename;
+
+ pc_machinename = new char[strlen(machinename) + 1];
+ strcpy(pc_machinename, machinename);
+}
+#endif // GTERM_PC
+
+int
+GTerm::IsSelected(int x, int y)
+{
+ if(color && x >= 0 && x < Width() && y >= 0 && y < Height())
+ return color[(linenumbers[y] * MAXWIDTH) + x] & SELECTED;
+ return 0;
+}
+
+void
+GTerm::Select(int x, int y, int select)
+{
+ if(color && x >= 0 && x < Width() && y >= 0 && y < Height())
+ {
+ if(select)
+ color[(linenumbers[y] * MAXWIDTH) + x] |= SELECTED;
+ else
+ color[(linenumbers[y] * MAXWIDTH) + x] &= ~SELECTED;
+ changed_line(y, x, x);
+// update_changes();
+ }
+}
+
+unsigned char
+GTerm::GetChar(int x, int y)
+{
+ if(text && x >= 0 && x < Width() && y >= 0 && y < Height())
+ return text[(linenumbers[y] * MAXWIDTH) + x];
+
+ return 0;
+}
+
+
+
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifndef INCLUDED_GTERM_H
+#define INCLUDED_GTERM_H
+
+#ifdef __GNUG__
+#pragma interface
+#endif
+
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#define MAXWIDTH 200
+#define MAXHEIGHT 100
+
+
+#define GTERM_PC
+
+
+class GTerm;
+typedef void (GTerm::*StateFunc)();
+
+struct StateOption {
+ int byte; // char value to look for; -1==end/default
+ StateFunc action;
+ StateOption *next_state;
+};
+
+class GTerm {
+public:
+ // mode flags
+ enum
+ {
+ BOLD=0x1,
+ BLINK=0x2,
+ UNDERLINE=0x4,
+ INVERSE=0x8,
+ NOEOLWRAP=0x10,
+ CURSORAPPMODE=0x20,
+ CURSORRELATIVE=0x40,
+ NEWLINE=0x80,
+ INSERT=0x100,
+ KEYAPPMODE=0x200,
+ DEFERUPDATE=0x400,
+ DESTRUCTBS=0x800,
+ TEXTONLY=0x1000,
+ LOCALECHO=0x2000,
+ CURSORINVISIBLE=0x4000,
+#ifdef GTERM_PC
+// ,PC=0x10000
+ PC=0x8000,
+#endif // GTERM_PC
+ SELECTED=0x8000 // flag to indicate a char is selected
+ } MODES;
+
+private:
+ // terminal info
+ int width, height, scroll_top, scroll_bot;
+ unsigned char *text;
+ unsigned short *color;
+ short linenumbers[MAXHEIGHT]; // text at text[linenumbers[y]*MAXWIDTH]
+ unsigned char dirty_startx[MAXHEIGHT], dirty_endx[MAXHEIGHT];
+ int pending_scroll; // >0 means scroll up
+ int doing_update;
+
+ // terminal state
+ int cursor_x, cursor_y;
+ int save_x, save_y, save_attrib;
+ int fg_color, bg_color;
+ int mode_flags;
+ char tab_stops[MAXWIDTH];
+ StateOption *current_state;
+ static StateOption normal_state[], esc_state[], bracket_state[];
+ static StateOption cset_shiftin_state[], cset_shiftout_state[];
+ static StateOption hash_state[];
+ static StateOption vt52_normal_state[], vt52_esc_state[];
+ static StateOption vt52_cursory_state[], vt52_cursorx_state[];
+
+public:
+ // keycode translation
+ enum
+ {
+ KEY_NULL = 0,
+ KEY_BACK = 1000,
+ KEY_TAB,
+ KEY_RETURN,
+ KEY_ESCAPE,
+ KEY_SPACE,
+ KEY_LEFT,
+ KEY_UP,
+ KEY_RIGHT,
+ KEY_DOWN,
+ KEY_NUMPAD_LEFT,
+ KEY_NUMPAD_UP,
+ KEY_NUMPAD_RIGHT,
+ KEY_NUMPAD_DOWN,
+ KEY_DIVIDE,
+ KEY_NUMPAD_DIVIDE,
+ KEY_MULTIPLY,
+ KEY_NUMPAD_MULTIPLY,
+ KEY_SUBTRACT,
+ KEY_NUMPAD_SUBTRACT,
+ KEY_ADD,
+ KEY_NUMPAD_ADD,
+ KEY_HOME,
+ KEY_NUMPAD_HOME,
+ KEY_END,
+ KEY_NUMPAD_END,
+ KEY_PAGEUP,
+ KEY_NUMPAD_PAGEUP,
+ KEY_PAGEDOWN,
+ KEY_NUMPAD_PAGEDOWN,
+ KEY_INSERT,
+ KEY_NUMPAD_INSERT,
+ KEY_DELETE,
+ KEY_NUMPAD_DELETE,
+ KEY_ENTER,
+ KEY_NUMPAD_ENTER,
+ KEY_NEXT,
+ KEY_PRIOR,
+ KEY_NUMPAD0,
+ KEY_NUMPAD1,
+ KEY_NUMPAD2,
+ KEY_NUMPAD3,
+ KEY_NUMPAD4,
+ KEY_NUMPAD5,
+ KEY_NUMPAD6,
+ KEY_NUMPAD7,
+ KEY_NUMPAD8,
+ KEY_NUMPAD9,
+ KEY_NUMPAD_BEGIN,
+ KEY_NUMPAD_DECIMAL,
+ KEY_F1,
+ KEY_F2,
+ KEY_F3,
+ KEY_F4,
+ KEY_F5,
+ KEY_F6,
+ KEY_F7,
+ KEY_F8,
+ KEY_F9,
+ KEY_F10,
+ KEY_F11,
+ KEY_F12
+ } KEYCODE;
+
+private:
+ typedef struct
+ {
+ int
+ keyCode;
+
+ char
+ *seq;
+ } VTKeySeq;
+
+ static VTKeySeq cursor_keys[];
+ static VTKeySeq cursor_app_keys[];
+ static VTKeySeq keypad_keys[];
+ static VTKeySeq keypad_app_keys[];
+ static VTKeySeq other_keys[];
+
+#ifdef GTERM_PC
+ typedef struct
+ {
+ int
+ keyCode;
+
+ unsigned short
+ normSeq,
+ shiftSeq,
+ ctrlSeq,
+ altSeq;
+ } PCKeySeq;
+
+ static PCKeySeq pc_keys[];
+#endif // GTERM_PC
+
+ VTKeySeq *translate_vt_keycode(int keyCode, VTKeySeq *table);
+#ifdef GTERM_PC
+ unsigned short translate_pc_keycode(int KeyCode, int shift, int ctrl, int alt);
+#endif // GTERM_PC
+
+#ifdef GTERM_PC
+
+#define GTERM_PC_MAXARGS 10
+
+#define GTERM_PC_CMD_EXIT 0 // end console mode
+#define GTERM_PC_CMD_CURONOFF 1 // cursor on/off
+#define GTERM_PC_CMD_MOVECURSOR 2 // move cursor to x,y
+#define GTERM_PC_CMD_PUTTEXT 3 // put text
+#define GTERM_PC_CMD_WRITE 4 // write text
+#define GTERM_PC_CMD_MOVETEXT 5 // move text
+#define GTERM_PC_CMD_BEEP 6 // beep
+#define GTERM_PC_CMD_SELECTPRINTER 7 // select printer
+#define GTERM_PC_CMD_PRINTCHAR 8 // print a single character
+#define GTERM_PC_CMD_PRINTCHARS 9 // prints multiple characters
+
+#define GTERM_PC_MAXPRINTERNAME 100
+
+ int pc_cury;
+ int pc_curx;
+ int pc_state;
+ int pc_curcmd;
+ int pc_numargs;
+ int pc_argcount;
+ int pc_numdata;
+ int pc_datacount;
+ int pc_oldWidth;
+ int pc_oldHeight;
+ unsigned char pc_args[GTERM_PC_MAXARGS];
+ char *pc_machinename;
+ char pc_printername[GTERM_PC_MAXPRINTERNAME];
+
+//
+// Define state tables
+//
+ static StateOption pc_cmd_state[];
+ static StateOption pc_arg_state[];
+ static StateOption pc_data_state[];
+
+//
+// Define actions
+//
+ void pc_begin(void);
+ void pc_end(void);
+ void pc_cmd(void);
+ void pc_arg(void);
+ void pc_data(void);
+
+#endif // GTERM_PC
+
+ // utility functions
+ void update_changes();
+ void scroll_region(int start_y, int end_y, int num); // does clear
+ void shift_text(int y, int start_x, int end_x, int num); // ditto
+ void clear_area(int start_x, int start_y, int end_x, int end_y);
+ void changed_line(int y, int start_x, int end_x);
+ void move_cursor(int x, int y);
+ int calc_color(int fg, int bg, int flags);
+
+ // action parameters
+ int nparam, param[30];
+ unsigned char *input_data;
+ int data_len, q_mode, got_param, quote_mode;
+
+ // terminal actions
+ void normal_input();
+ void set_q_mode();
+ void set_quote_mode();
+ void clear_param();
+ void param_digit();
+ void next_param();
+
+ // non-printing characters
+ void cr(), lf(), ff(), bell(), tab(), bs();
+
+ // escape sequence actions
+ void keypad_numeric();
+ void keypad_application();
+ void save_cursor();
+ void restore_cursor();
+ void set_tab();
+ void index_down();
+ void index_up();
+ void next_line();
+ void reset();
+
+ void cursor_left();
+ void cursor_down();
+ void cursor_right();
+ void cursor_up();
+ void cursor_position();
+ void device_attrib();
+ void delete_char();
+ void set_mode();
+ void clear_mode();
+ void request_param();
+ void set_margins();
+ void delete_line();
+ void status_report();
+ void erase_display();
+ void erase_line();
+ void insert_line();
+ void set_colors();
+ void clear_tab();
+ void insert_char();
+ void screen_align();
+ void erase_char();
+
+ // vt52 stuff
+ void vt52_cursory();
+ void vt52_cursorx();
+ void vt52_ident();
+
+public:
+ GTerm(int w, int h);
+ virtual ~GTerm();
+
+ // function to control terminal
+ virtual void ProcessInput(int len, unsigned char *data);
+ virtual void ProcessOutput(int len, unsigned char *data) { SendBack(len, (char *)data); }
+ virtual void ResizeTerminal(int width, int height);
+ int Width() { return width; }
+ int Height() { return height; }
+ virtual void Update();
+ virtual void ExposeArea(int x, int y, int w, int h);
+ virtual void Reset();
+
+ int GetMode() { return mode_flags; }
+ void SetMode(int mode) { mode_flags = mode; }
+ void set_mode_flag(int flag);
+ void clear_mode_flag(int flag);
+
+ // manditory child-supplied functions
+ virtual void DrawText(int fg_color, int bg_color, int flags,
+ int x, int y, int len, unsigned char *string) = 0;
+ virtual void DrawCursor(int fg_color, int bg_color, int flags,
+ int x, int y, unsigned char c) = 0;
+
+ // optional child-supplied functions
+ virtual void MoveChars(int sx, int sy, int dx, int dy, int w, int h) { }
+ virtual void ClearChars(int bg_color, int x, int y, int w, int h) { }
+ virtual void SendBack(int len, char *data) { }
+ virtual void SendBack(char *data) { SendBack(strlen(data), data); }
+ virtual void ModeChange(int state) { }
+ virtual void Bell() { }
+ virtual void RequestSizeChange(int w, int h) { }
+
+ virtual int TranslateKeyCode(int keycode, int *len, char *data,
+ int shift = 0, int ctrl = 0, int alt = 0);
+
+#ifdef GTERM_PC
+ virtual void SelectPrinter(char *PrinterName) {}
+ virtual void PrintChars(int len, unsigned char *data) {}
+
+ void SetMachineName(char *machinename);
+ char *GetMachineName(void) { return pc_machinename; }
+#endif // GTERM_PC
+
+ virtual int IsSelected(int x, int y);
+ virtual void Select(int x, int y, int select);
+ virtual unsigned char GetChar(int x, int y);
+};
+
+#endif
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Derry Bryson
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+
+#include "gterm.hpp"
+#include <ctype.h>
+
+//
+// Keycode translation tables
+//
+GTerm::VTKeySeq GTerm::cursor_keys[] =
+{
+ { KEY_LEFT, "\033[D" },
+ { KEY_UP, "\033[A" },
+ { KEY_RIGHT, "\033[C" },
+ { KEY_DOWN, "\033[B" },
+ { KEY_NUMPAD_LEFT, "\033[D" },
+ { KEY_NUMPAD_UP, "\033[A" },
+ { KEY_NUMPAD_RIGHT, "\033[C" },
+ { KEY_NUMPAD_DOWN, "\033[B" },
+ { KEY_NULL, 0 }
+};
+
+GTerm::VTKeySeq GTerm::cursor_app_keys[] =
+{
+ { KEY_LEFT, "\033OD" },
+ { KEY_UP, "\033OA" },
+ { KEY_RIGHT, "\033OC" },
+ { KEY_DOWN, "\033OB" },
+ { KEY_NUMPAD_LEFT, "\033OD" },
+ { KEY_NUMPAD_UP, "\033OA" },
+ { KEY_NUMPAD_RIGHT, "\033OC" },
+ { KEY_NUMPAD_DOWN, "\033OB" },
+ { KEY_NULL, 0 }
+};
+
+GTerm::VTKeySeq GTerm::keypad_keys[] =
+{
+ { KEY_NUMPAD_DIVIDE, "/" },
+ { KEY_NUMPAD_MULTIPLY, "*" },
+ { KEY_NUMPAD_SUBTRACT, "-" },
+ { KEY_NUMPAD_HOME, "\033[\000" },
+ { KEY_NUMPAD7, "7" },
+ { KEY_NUMPAD8, "8" },
+ { KEY_NUMPAD_PAGEUP, "\033[5~" },
+ { KEY_NUMPAD9, "9" },
+ { KEY_NUMPAD_ADD, "+" },
+ { KEY_NUMPAD4, "4" },
+ { KEY_NUMPAD_BEGIN, "\033[s" },
+ { KEY_NUMPAD5, "5" },
+ { KEY_NUMPAD6, "6" },
+ { KEY_NUMPAD_END, "\033[e" },
+ { KEY_NUMPAD1, "1" },
+ { KEY_NUMPAD2, "2" },
+ { KEY_NUMPAD_PAGEDOWN, "\033[6~" },
+ { KEY_NUMPAD3, "3" },
+ { KEY_NUMPAD_INSERT, "\033[2~" },
+ { KEY_NUMPAD0, "0" },
+ { KEY_NUMPAD_DELETE, "\033[3~" },
+ { KEY_NUMPAD_DECIMAL, "." },
+ { KEY_NUMPAD_ENTER, "\r" },
+ { KEY_NULL, 0 }
+};
+
+GTerm::VTKeySeq GTerm::keypad_app_keys[] =
+{
+ { KEY_NUMPAD_DIVIDE, "\033Oo" },
+ { KEY_NUMPAD_MULTIPLY, "\033Oj" },
+ { KEY_NUMPAD_SUBTRACT, "\033Om" },
+ { KEY_NUMPAD_HOME, "\033[\000" },
+ { KEY_NUMPAD7, "\033Ow" },
+ { KEY_NUMPAD8, "\033Ox" },
+ { KEY_NUMPAD_PAGEUP, "\033[5~" },
+ { KEY_NUMPAD9, "\033Oy" },
+ { KEY_NUMPAD_ADD, "\033Ok" },
+ { KEY_NUMPAD4, "\033Ot" },
+ { KEY_NUMPAD_BEGIN, "\033[s" },
+ { KEY_NUMPAD5, "\033Ou" },
+ { KEY_NUMPAD6, "\033Ov" },
+ { KEY_NUMPAD_END, "\033[e" },
+ { KEY_NUMPAD1, "\033Oq" },
+ { KEY_NUMPAD2, "\033Or" },
+ { KEY_NUMPAD_PAGEDOWN, "\033[6~" },
+ { KEY_NUMPAD3, "\033Os" },
+ { KEY_NUMPAD_INSERT, "\033[2~" },
+ { KEY_NUMPAD0, "\033Op" },
+ { KEY_NUMPAD_DELETE, "\033[3~" },
+ { KEY_NUMPAD_DECIMAL, "\033On" },
+ { KEY_NUMPAD_ENTER, "\033OM" },
+ { KEY_NULL, 0 }
+};
+
+GTerm::VTKeySeq GTerm::other_keys[] =
+{
+ { KEY_HOME, "\033[\000" },
+ { KEY_PAGEUP, "\033[5~" },
+ { KEY_PRIOR, "\033[5~" },
+ { KEY_PAGEDOWN, "\033[6~"},
+ { KEY_NEXT, "\033[6~" },
+ { KEY_END, "\033[e" },
+ { KEY_INSERT, "\033[2~" },
+ { KEY_F1, "\033[11~" },
+ { KEY_F2, "\033[12~" },
+ { KEY_F3, "\033[13~" },
+ { KEY_F4, "\033[14~" },
+ { KEY_F5, "\033[15~" },
+ { KEY_F6, "\033[17~" },
+ { KEY_F7, "\033[18~" },
+ { KEY_F8, "\033[19~" },
+ { KEY_F9, "\033[20~" },
+ { KEY_F10, "\033[21~" },
+ { KEY_F11, "\033[23~" },
+ { KEY_F12, "\033[24~" },
+ { KEY_RETURN, "\r" },
+ { KEY_SPACE, " " },
+ { KEY_BACK, "\x8" },
+ { KEY_ESCAPE, "\x1b" },
+ { KEY_TAB, "\x9" },
+ { KEY_DELETE, "\x7f" },
+ { KEY_NULL, 0 }
+};
+
+#ifdef GTERM_PC
+GTerm::PCKeySeq GTerm::pc_keys[] =
+{
+ { '0', 0x0030, 0x0029, 0x0000, 0x8100 },
+ { '1', 0x0031, 0x0021, 0x0000, 0x7800 },
+ { '2', 0x0032, 0x0040, 0x0000, 0x7900 },
+ { '3', 0x0033, 0x0023, 0x0000, 0x7a00 },
+ { '4', 0x0034, 0x0024, 0x0000, 0x7b00 },
+ { '5', 0x0035, 0x0025, 0x0000, 0x7c00 },
+ { '6', 0x0036, 0x005e, 0x0000, 0x7d00 },
+ { '7', 0x0037, 0x0026, 0x0000, 0x7e00 },
+ { '8', 0x0038, 0x002a, 0x0000, 0x7f00 },
+ { '9', 0x0039, 0x0028, 0x0000, 0x8000 },
+
+ { ')', 0x0030, 0x0029, 0x0000, 0x8100 },
+ { '!', 0x0031, 0x0021, 0x0000, 0x7800 },
+ { '@', 0x0032, 0x0040, 0x0000, 0x7900 },
+ { '#', 0x0033, 0x0023, 0x0000, 0x7a00 },
+ { '$', 0x0034, 0x0024, 0x0000, 0x7b00 },
+ { '%', 0x0035, 0x0025, 0x0000, 0x7c00 },
+ { '^', 0x0036, 0x005e, 0x0000, 0x7d00 },
+ { '&', 0x0037, 0x0026, 0x0000, 0x7e00 },
+ { '*', 0x0038, 0x002a, 0x0000, 0x7f00 },
+ { '(', 0x0039, 0x0028, 0x0000, 0x8000 },
+
+ { 'a', 0x0061, 0x0041, 0x0001, 0x1e00 },
+ { 'b', 0x0062, 0x0042, 0x0002, 0x3000 },
+ { 'c', 0x0063, 0x0043, 0x0003, 0x2e00 },
+ { 'd', 0x0064, 0x0044, 0x0004, 0x2000 },
+ { 'e', 0x0065, 0x0045, 0x0005, 0x1200 },
+ { 'f', 0x0066, 0x0046, 0x0006, 0x2100 },
+ { 'g', 0x0067, 0x0047, 0x0007, 0x2200 },
+ { 'h', 0x0068, 0x0048, 0x0008, 0x2300 },
+ { 'i', 0x0069, 0x0049, 0x0009, 0x1700 },
+ { 'j', 0x006a, 0x004a, 0x000a, 0x2400 },
+ { 'k', 0x006b, 0x004b, 0x000b, 0x2500 },
+ { 'l', 0x006c, 0x004c, 0x000c, 0x2600 },
+ { 'm', 0x006d, 0x004d, 0x000d, 0x3200 },
+ { 'n', 0x006e, 0x004e, 0x000e, 0x3100 },
+ { 'o', 0x006f, 0x004f, 0x000f, 0x1800 },
+ { 'p', 0x0070, 0x0050, 0x0010, 0x1900 },
+ { 'q', 0x0071, 0x0051, 0xff91, 0x1000 },
+ { 'r', 0x0072, 0x0052, 0x0012, 0x1300 },
+ { 's', 0x0073, 0x0053, 0xff93, 0x1f00 },
+ { 't', 0x0074, 0x0054, 0x0014, 0x1400 },
+ { 'u', 0x0075, 0x0055, 0x0015, 0x1600 },
+ { 'v', 0x0076, 0x0056, 0x0016, 0x2f00 },
+ { 'w', 0x0077, 0x0057, 0x0017, 0x1100 },
+ { 'x', 0x0078, 0x0058, 0x0018, 0x2d00 },
+ { 'y', 0x0079, 0x0059, 0x0019, 0x1500 },
+ { 'z', 0x007a, 0x005a, 0x001a, 0x2c00 },
+
+ { '`', 0x0060, 0x007e, 0x0000, 0x0000 },
+ { '~', 0x0060, 0x007e, 0x0000, 0x0000 },
+ { '-', 0x002d, 0x005f, 0x0000, 0x0000 },
+ { '_', 0x002d, 0x005f, 0x0000, 0x0000 },
+ { '=', 0x003d, 0x002b, 0x0000, 0x0000 },
+ { '+', 0x003d, 0x002b, 0x0000, 0x0000 },
+ { ',', 0x002c, 0x003c, 0x0000, 0x0000 },
+ { '<', 0x002c, 0x003c, 0x0000, 0x0000 },
+ { '.', 0x002e, 0x003e, 0x0000, 0x0000 },
+ { '>', 0x002e, 0x003e, 0x0000, 0x0000 },
+ { ';', 0x003b, 0x003a, 0x0000, 0x0000 },
+ { ':', 0x003b, 0x003a, 0x0000, 0x0000 },
+ { '\'', 0x002c, 0x0022, 0x0000, 0x0000 },
+ { '"', 0x002c, 0x0022, 0x0000, 0x0000 },
+ { '[', 0x005b, 0x007b, 0x0000, 0x0000 },
+ { '{', 0x005b, 0x007b, 0x0000, 0x0000 },
+ { ']', 0x005d, 0x007d, 0x0000, 0x0000 },
+ { '}', 0x005d, 0x007d, 0x0000, 0x0000 },
+ { '\\', 0x005c, 0x007c, 0x0000, 0x0000 },
+ { '|', 0x005c, 0x007c, 0x0000, 0x0000 },
+ { '/', 0x002f, 0x003f, 0x0000, 0x0000 },
+ { '?', 0x002f, 0x003f, 0x0000, 0x0000 },
+
+ { KEY_BACK, 0x0008, 0x0008, 0x007f, 0x0000 },
+ { KEY_TAB, 0x0009, 0x0f00, 0x0000, 0x0000 },
+ { KEY_RETURN, 0x000d, 0x000d, 0x000a, 0x0000 },
+ { KEY_ESCAPE, 0x001b, 0x001b, 0x001b, 0x0000 },
+ { KEY_SPACE, 0x0020, 0x0020, 0x0000, 0x0000 },
+ { KEY_LEFT, 0x4b00, 0x0034, 0x7300, 0xb200 },
+ { KEY_UP, 0x4800, 0x0038, 0xa000, 0xaf00 },
+ { KEY_RIGHT, 0x4d00, 0x0036, 0x7400, 0xb400 },
+ { KEY_DOWN, 0x5000, 0x0032, 0xa400, 0xb700 },
+ { KEY_NUMPAD_LEFT, 0x4b00, 0x0034, 0x7300, 0xb200 },
+ { KEY_NUMPAD_UP, 0x4800, 0x0038, 0xa000, 0xaf00 },
+ { KEY_NUMPAD_RIGHT, 0x4d00, 0x0036, 0x7400, 0xb400 },
+ { KEY_NUMPAD_DOWN, 0x5000, 0x0032, 0xa400, 0xb700 },
+ { KEY_DIVIDE, 0x002f, 0x002f, 0x0000, 0x0000 },
+ { KEY_MULTIPLY, 0x0038, 0x0038, 0x0000, 0x7f00 },
+ { KEY_SUBTRACT, 0x002d, 0x002d, 0x0000, 0x0000 },
+ { KEY_ADD, 0x003d, 0x003d, 0x0000, 0x0000 },
+ { KEY_HOME, 0x4700, 0x0037, 0x7700, 0xae00 },
+ { KEY_END, 0x4f00, 0x0031, 0x7500, 0xb600 },
+ { KEY_PAGEUP, 0x4900, 0x0039, 0x8400, 0xb000 },
+ { KEY_PAGEDOWN, 0x5100, 0x0033, 0x7600, 0xb800 },
+ { KEY_INSERT, 0x5200, 0x0030, 0xa500, 0xb900 },
+ { KEY_DELETE, 0x5300, 0x002e, 0xa600, 0xba00 },
+ { KEY_ENTER, 0x000d, 0x000d, 0x000a, 0x0000 },
+ { KEY_NEXT, 0x5100, 0x0033, 0x7600, 0xb800 },
+ { KEY_PRIOR, 0x4900, 0x0039, 0x8400, 0xb000 },
+
+ { KEY_NUMPAD0, 0x0030, 0x0029, 0x0000, 0x8100 },
+ { KEY_NUMPAD1, 0x0031, 0x0021, 0x0000, 0x7800 },
+ { KEY_NUMPAD2, 0x0032, 0x0040, 0x0000, 0x7900 },
+ { KEY_NUMPAD3, 0x0033, 0x0023, 0x0000, 0x7a00 },
+ { KEY_NUMPAD4, 0x0034, 0x0024, 0x0000, 0x7b00 },
+ { KEY_NUMPAD5, 0x0035, 0x0025, 0x0000, 0x7c00 },
+ { KEY_NUMPAD6, 0x0036, 0x005e, 0x0000, 0x7d00 },
+ { KEY_NUMPAD7, 0x0037, 0x0026, 0x0000, 0x7e00 },
+ { KEY_NUMPAD8, 0x0038, 0x002a, 0x0000, 0x7f00 },
+ { KEY_NUMPAD9, 0x0039, 0x0028, 0x0000, 0x8000 },
+
+ { KEY_F1, 0x3b00, 0x5400, 0x5e00, 0x6800 },
+ { KEY_F2, 0x3c00, 0x5500, 0x5f00, 0x6900 },
+ { KEY_F3, 0x3d00, 0x5600, 0x6000, 0x6a00 },
+ { KEY_F4, 0x3e00, 0x5700, 0x6100, 0x6b00 },
+ { KEY_F5, 0x3f00, 0x5800, 0x6200, 0x6c00 },
+ { KEY_F6, 0x4000, 0x5900, 0x6300, 0x6d00 },
+ { KEY_F7, 0x4100, 0x5a00, 0x6400, 0x6e00 },
+ { KEY_F8, 0x4200, 0x5b00, 0x6500, 0x6f00 },
+ { KEY_F9, 0x4300, 0x5c00, 0x6600, 0x7000 },
+ { KEY_F10, 0x4400, 0x5d00, 0x6700, 0x7100 },
+ { KEY_F11, 0x0000, 0x0000, 0x0000, 0x0000 },
+ { KEY_F12, 0x0000, 0x0000, 0x0000, 0x0000 },
+ { KEY_NULL, 0, 0, 0, 0 }
+};
+#endif // GTERM_PC
+
+GTerm::VTKeySeq *
+GTerm::translate_vt_keycode(int keyCode, VTKeySeq *table)
+{
+ while(table->keyCode != KEY_NULL)
+ {
+ if(table->keyCode == keyCode)
+ return table;
+ table++;
+ }
+ return 0;
+}
+
+#ifdef GTERM_PC
+unsigned short
+GTerm::translate_pc_keycode(int keyCode, int shift, int ctrl, int alt)
+{
+ int
+ i;
+
+ if(keyCode < 1000)
+ {
+ if(isupper(keyCode))
+ {
+ if(!alt)
+ shift = 1;
+ keyCode = tolower(keyCode);
+ }
+
+ if(iscntrl(keyCode))
+ {
+ ctrl = 1;
+ keyCode = keyCode + 'a' - 1;
+ }
+ }
+
+//printf("looking for %d...", keyCode);
+ for(i = 0; pc_keys[i].keyCode; i++)
+ {
+ if(keyCode == pc_keys[i].keyCode)
+ {
+//printf("found!\n");
+ if(shift)
+ return pc_keys[i].shiftSeq;
+ if(ctrl)
+ return pc_keys[i].ctrlSeq;
+ if(alt)
+ return pc_keys[i].altSeq;
+ return pc_keys[i].normSeq;
+ }
+ }
+//printf("not found!\n");
+ return 0;
+}
+#endif // GTERM_PC
+
+int
+GTerm::TranslateKeyCode(int keyCode, int *len, char *data, int shift,
+ int ctrl, int alt)
+{
+ int
+ mode = GetMode();
+
+#ifdef GTERM_PC
+ unsigned short
+ pcKeySeq;
+#endif // GTERM_PC
+
+ VTKeySeq
+ *keySeq;
+
+//printf("keycode = %d, shift = %d, ctrl = %d, alt = %d\n", keyCode, shift, ctrl, alt);
+//printf("GTerm::TranslateKeyCode(): mode = %x\n", mode);
+#ifdef GTERM_PC
+ if(mode & PC)
+ {
+ pcKeySeq = translate_pc_keycode(keyCode, shift, ctrl, alt);
+ if(pcKeySeq)
+ {
+//printf("keySeq = %x\n", pcKeySeq);
+ *(unsigned char *)data++ = pcKeySeq >> 8;
+ *(unsigned char *)data = pcKeySeq & 0xff;
+ *len = 2;
+ return 1;
+ }
+ return 0;
+ }
+ else
+ {
+#endif // GTERM_PC
+//printf("mode = %x\n", mode);
+ if(mode & KEYAPPMODE)
+ {
+//printf("KEYAPPMODE\n");
+ keySeq = translate_vt_keycode(keyCode, keypad_app_keys);
+ }
+ else
+ keySeq = translate_vt_keycode(keyCode, keypad_keys);
+
+ if(!keySeq)
+ {
+ if(mode & CURSORAPPMODE)
+ {
+//printf("CURSORAPPMODE\n");
+ keySeq = translate_vt_keycode(keyCode, cursor_app_keys);
+//printf("keySeq = %08x\n", keySeq);
+ }
+ else
+ keySeq = translate_vt_keycode(keyCode, cursor_keys);
+ }
+
+ if(!keySeq)
+ keySeq = translate_vt_keycode(keyCode, other_keys);
+
+ if(keySeq)
+ {
+ *len = strlen(keySeq->seq);
+ strcpy(data, keySeq->seq);
+ return 1;
+ }
+ return 0;
+#ifdef GTERM_PC
+ }
+#endif // GTERM_PC
+}
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+
+/* GRG: Added a lot of GTerm:: prefixes to correctly form pointers
+ * to functions in all the tables. Example: &cr -> >erm::cr
+ */
+
+#include "gterm.hpp"
+
+// state machine transition tables
+StateOption GTerm::normal_state[] = {
+ { 13, >erm::cr, normal_state },
+ { 10, >erm::lf, normal_state },
+ { 12, >erm::ff, normal_state },
+ { 9, >erm::tab, normal_state },
+ { 8, >erm::bs, normal_state },
+ { 7, >erm::bell, normal_state },
+ { 27, 0, esc_state },
+ { -1, >erm::normal_input, normal_state} };
+
+StateOption GTerm::esc_state[] = {
+ { '[', >erm::clear_param, bracket_state },
+ { '>', >erm::keypad_numeric, normal_state },
+ { '=', >erm::keypad_application, normal_state },
+ { '7', >erm::save_cursor, normal_state },
+ { '8', >erm::restore_cursor, normal_state },
+ { 'H', >erm::set_tab, normal_state },
+ { 'D', >erm::index_down, normal_state },
+ { 'M', >erm::index_up, normal_state },
+ { 'E', >erm::next_line, normal_state },
+ { 'c', >erm::reset, normal_state },
+ { '(', 0, cset_shiftin_state },
+ { ')', 0, cset_shiftout_state },
+ { '#', 0, hash_state },
+#ifdef GTERM_PC
+ { '!', >erm::pc_begin, pc_cmd_state },
+#endif
+
+ { 13, >erm::cr, esc_state }, // standard VT100 wants
+ { 10, >erm::lf, esc_state }, // cursor controls in
+ { 12, >erm::ff, esc_state }, // the middle of ESC
+ { 9, >erm::tab, esc_state }, // sequences
+ { 8, >erm::bs, esc_state },
+ { 7, >erm::bell, esc_state },
+ { -1, 0, normal_state} };
+
+// Should but cursor control characters in these groups as well.
+// Maybe later.
+
+StateOption GTerm::cset_shiftin_state[] = {
+ { 'A', 0, normal_state }, // should set UK characters
+ { '0', 0, normal_state }, // should set Business Gfx
+ { -1, 0, normal_state }, // default to ASCII
+ };
+
+StateOption GTerm::cset_shiftout_state[] = {
+ { 'A', 0, normal_state }, // should set UK characters
+ { '0', 0, normal_state }, // should set Business Gfx
+ { -1, 0, normal_state }, // default to ASCII
+ };
+
+StateOption GTerm::hash_state[] = {
+ { '8', >erm::screen_align, normal_state },
+ { -1, 0, normal_state} };
+
+StateOption GTerm::bracket_state[] = {
+ { '?', >erm::set_q_mode, bracket_state },
+ { '"', >erm::set_quote_mode, bracket_state },
+ { '0', >erm::param_digit, bracket_state },
+ { '1', >erm::param_digit, bracket_state },
+ { '2', >erm::param_digit, bracket_state },
+ { '3', >erm::param_digit, bracket_state },
+ { '4', >erm::param_digit, bracket_state },
+ { '5', >erm::param_digit, bracket_state },
+ { '6', >erm::param_digit, bracket_state },
+ { '7', >erm::param_digit, bracket_state },
+ { '8', >erm::param_digit, bracket_state },
+ { '9', >erm::param_digit, bracket_state },
+ { ';', >erm::next_param, bracket_state },
+ { 'D', >erm::cursor_left, normal_state },
+ { 'B', >erm::cursor_down, normal_state },
+ { 'C', >erm::cursor_right, normal_state },
+ { 'A', >erm::cursor_up, normal_state },
+ { 'H', >erm::cursor_position, normal_state },
+ { 'f', >erm::cursor_position, normal_state },
+ { 'c', >erm::device_attrib, normal_state },
+ { 'P', >erm::delete_char, normal_state },
+ { 'h', >erm::set_mode, normal_state },
+ { 'l', >erm::clear_mode, normal_state },
+ { 's', >erm::save_cursor, normal_state },
+ { 'u', >erm::restore_cursor, normal_state },
+ { 'x', >erm::request_param, normal_state },
+ { 'r', >erm::set_margins, normal_state },
+ { 'M', >erm::delete_line, normal_state },
+ { 'n', >erm::status_report, normal_state },
+ { 'J', >erm::erase_display, normal_state },
+ { 'K', >erm::erase_line, normal_state },
+ { 'L', >erm::insert_line, normal_state },
+ { 'm', >erm::set_colors, normal_state },
+ { 'g', >erm::clear_tab, normal_state },
+ { '@', >erm::insert_char, normal_state },
+ { 'X', >erm::erase_char, normal_state },
+ { 'p', 0, normal_state }, // something to do with levels
+
+ { 13, >erm::cr, bracket_state },// standard VT100 wants
+ { 10, >erm::lf, bracket_state },// cursor controls in
+ { 12, >erm::ff, bracket_state },// the middle of ESC
+ { 9, >erm::tab, bracket_state },// sequences
+ { 8, >erm::bs, bracket_state },
+ { 7, >erm::bell, bracket_state },
+ { -1, 0, normal_state} };
+
+#ifdef GTERM_PC
+
+StateOption GTerm::pc_cmd_state[] =
+{
+ { GTERM_PC_CMD_CURONOFF, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_MOVECURSOR, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_PUTTEXT, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_WRITE, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_MOVETEXT, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_EXIT, >erm::pc_end, normal_state },
+ { GTERM_PC_CMD_BEEP, >erm::pc_cmd, pc_cmd_state },
+ { GTERM_PC_CMD_SELECTPRINTER, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_PRINTCHAR, >erm::pc_cmd, pc_arg_state },
+ { GTERM_PC_CMD_PRINTCHARS, >erm::pc_cmd, pc_arg_state },
+ { -1, >erm::pc_cmd, pc_cmd_state }
+};
+
+StateOption GTerm::pc_arg_state[] =
+{
+ { -1, >erm::pc_arg, pc_arg_state }
+};
+
+StateOption GTerm::pc_data_state[] =
+{
+ { -1, >erm::pc_data, pc_data_state }
+};
+
+#endif // GTERM_PC
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+
+#include "gterm.hpp"
+//#include <stdlib.h>
+
+int GTerm::calc_color(int fg, int bg, int flags)
+{
+ return (flags & 15) | (fg << 4) | (bg << 8);
+}
+
+void GTerm::update_changes()
+{
+ int yp, start_x, mx;
+ int blank, c, x, y;
+
+ // prevent recursion for scrolls which cause exposures
+ if (doing_update) return;
+ doing_update = 1;
+
+ // first perform scroll-copy
+ mx = scroll_bot-scroll_top+1;
+ if (!(mode_flags & TEXTONLY) && pending_scroll &&
+ pending_scroll<mx && -pending_scroll<mx) {
+ if (pending_scroll<0) {
+ MoveChars(0, scroll_top, 0, scroll_top-pending_scroll,
+ width, scroll_bot-scroll_top+pending_scroll+1);
+ } else {
+ MoveChars(0, scroll_top+pending_scroll, 0, scroll_top,
+ width, scroll_bot-scroll_top-pending_scroll+1);
+ }
+ }
+ pending_scroll = 0;
+
+ // then update characters
+ for (y=0; y<height; y++) {
+ if (dirty_startx[y]>=MAXWIDTH) continue;
+ yp = linenumbers[y]*MAXWIDTH;
+
+ blank = !(mode_flags & TEXTONLY);
+ start_x = dirty_startx[y];
+ c = color[yp+start_x];
+ for (x=start_x; x<=dirty_endx[y]; x++) {
+ if (text[yp+x]!=32 && text[yp+x]) blank = 0;
+ if (c != color[yp+x]) {
+ if (!blank) {
+ if(mode_flags & PC)
+ DrawText((c>>4)&0xf, (c>>8)&0xf, c/*&15*/, start_x,
+ y, x-start_x, text+yp+start_x);
+ else
+ DrawText((c>>4)&7, (c>>8)&7, c/*&15*/, start_x,
+ y, x-start_x, text+yp+start_x);
+ } else {
+ ClearChars((c>>8)&7, start_x, y, x-start_x, 1);
+ }
+ start_x = x;
+ c = color[yp+x];
+ blank = !(mode_flags & TEXTONLY);
+ if (text[yp+x]!=32 && text[yp+x]) blank = 0;
+ }
+ }
+ if (!blank) {
+ if(mode_flags & PC)
+ DrawText((c>>4)&0xf, (c>>8)&0xf, c/*&15*/, start_x,
+ y, x-start_x, text+yp+start_x);
+ else
+ DrawText((c>>4)&7, (c>>8)&7, c/*&15*/, start_x,
+ y, x-start_x, text+yp+start_x);
+ } else {
+ ClearChars((c>>8)&7, start_x, y, x-start_x, 1);
+ }
+
+ dirty_endx[y] = 0;
+ dirty_startx[y] = MAXWIDTH;
+ }
+
+ if (!(mode_flags & CURSORINVISIBLE)) {
+ x = cursor_x;
+ if (x>=width) x = width-1;
+ yp = linenumbers[cursor_y]*MAXWIDTH+x;
+ c = color[yp];
+ if(mode_flags & PC)
+ DrawCursor((c>>4)&0xf, (c>>8)&0xf, c&15, x, cursor_y, text[yp]);
+ else
+ DrawCursor((c>>4)&7, (c>>8)&7, c&15, x, cursor_y, text[yp]);
+ }
+
+ doing_update = 0;
+}
+
+void GTerm::scroll_region(int start_y, int end_y, int num)
+{
+ int y, takey, fast_scroll, mx, clr, x, yp, c;
+ short temp[MAXHEIGHT];
+ unsigned char temp_sx[MAXHEIGHT], temp_ex[MAXHEIGHT];
+
+ if (!num) return;
+ mx = end_y-start_y+1;
+ if (num > mx) num = mx;
+ if (-num > mx) num = -mx;
+
+ fast_scroll = (start_y == scroll_top && end_y == scroll_bot &&
+ !(mode_flags & TEXTONLY));
+
+ if (fast_scroll) pending_scroll += num;
+
+ memcpy(temp, linenumbers, sizeof(linenumbers));
+ if (fast_scroll) {
+ memcpy(temp_sx, dirty_startx, sizeof(dirty_startx));
+ memcpy(temp_ex, dirty_endx, sizeof(dirty_endx));
+ }
+
+ c = calc_color(fg_color, bg_color, mode_flags);
+
+ // move the lines by renumbering where they point to
+ if (num<mx && -num<mx) for (y=start_y; y<=end_y; y++) {
+ takey = y+num;
+ clr = (takey<start_y) || (takey>end_y);
+ if (takey<start_y) takey = end_y+1-(start_y-takey);
+ if (takey>end_y) takey = start_y-1+(takey-end_y);
+
+ linenumbers[y] = temp[takey];
+ if (!fast_scroll || clr) {
+ dirty_startx[y] = 0;
+ dirty_endx[y] = width-1;
+ } else {
+ dirty_startx[y] = temp_sx[takey];
+ dirty_endx[y] = temp_ex[takey];
+ }
+ if (clr) {
+ yp = linenumbers[y]*MAXWIDTH;
+ memset(text+yp, 32, width);
+ for (x=0; x<width; x++) {
+ color[yp++] = c;
+ }
+ }
+ }
+}
+
+void GTerm::shift_text(int y, int start_x, int end_x, int num)
+{
+ int x, yp, mx, c;
+
+ if (!num) return;
+
+ yp = linenumbers[y]*MAXWIDTH;
+
+ mx = end_x-start_x+1;
+ if (num>mx) num = mx;
+ if (-num>mx) num = -mx;
+
+ if (num<mx && -num<mx) {
+ if (num<0) {
+ memmove(text+yp+start_x, text+yp+start_x-num, mx+num);
+ memmove(color+yp+start_x, color+yp+start_x-num, (mx+num)<<1);
+ } else {
+ memmove(text+yp+start_x+num, text+yp+start_x, mx-num);
+ memmove(color+yp+start_x+num, color+yp+start_x, (mx-num)<<1);
+ }
+ }
+
+ if (num<0) {
+ x = yp+end_x+num+1;
+ } else {
+ x = yp+start_x;
+ }
+ num = abs(num);
+ memset(text+x, 32, num);
+ c = calc_color(fg_color, bg_color, mode_flags);
+ while (num--) color[x++] = c;
+
+ changed_line(y, start_x, end_x);
+}
+
+void GTerm::clear_area(int start_x, int start_y, int end_x, int end_y)
+{
+ int x, y, c, yp, w;
+
+ c = calc_color(fg_color, bg_color, mode_flags);
+
+ w = end_x - start_x + 1;
+ if (w<1) return;
+
+ for (y=start_y; y<=end_y; y++) {
+ yp = linenumbers[y]*MAXWIDTH;
+ memset(text+yp+start_x, 32, w);
+ for (x=start_x; x<=end_x; x++) {
+ color[yp+x] = c;
+ }
+ changed_line(y, start_x, end_x);
+ }
+}
+
+void GTerm::changed_line(int y, int start_x, int end_x)
+{
+ if (dirty_startx[y] > start_x) dirty_startx[y] = start_x;
+ if (dirty_endx[y] < end_x) dirty_endx[y] = end_x;
+}
+
+void GTerm::move_cursor(int x, int y)
+{
+ if (cursor_x>=width) cursor_x = width-1;
+ changed_line(cursor_y, cursor_x, cursor_x);
+ cursor_x = x;
+ cursor_y = y;
+}
+
+void GTerm::set_mode_flag(int flag)
+{
+ mode_flags |= flag;
+ ModeChange(mode_flags);
+}
+
+void GTerm::clear_mode_flag(int flag)
+{
+ mode_flags &= ~flag;
+ ModeChange(mode_flags);
+}
+
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 1999 Timothy Miller
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+/* GRG: Added a lot of GTerm:: prefixes to correctly form pointers
+ * to functions in all the tables. Example: &cr -> >erm::cr
+ */
+
+#include "gterm.hpp"
+
+// I'm certain that this set is incomplete, but I got these from reverse-
+// engineering a VT100 verification test program.
+
+
+// state machine transition tables
+StateOption GTerm::vt52_normal_state[] = {
+ { 13, >erm::cr, vt52_normal_state },
+ { 10, >erm::lf, vt52_normal_state },
+ { 12, >erm::ff, vt52_normal_state },
+ { 9, >erm::tab, vt52_normal_state },
+ { 8, >erm::bs, vt52_normal_state },
+ { 7, >erm::bell, vt52_normal_state },
+ { 27, >erm::clear_param, vt52_esc_state },
+ { -1, >erm::normal_input, vt52_normal_state } };
+
+StateOption GTerm::vt52_esc_state[] = {
+ { 'D', >erm::cursor_left, vt52_normal_state },
+ { 'B', >erm::cursor_down, vt52_normal_state },
+ { 'C', >erm::cursor_right, vt52_normal_state },
+ { 'A', >erm::cursor_up, vt52_normal_state },
+ { 'Y', 0, vt52_cursory_state },
+ { 'J', >erm::erase_display, vt52_normal_state },
+ { 'K', >erm::erase_line, vt52_normal_state },
+ { 'H', >erm::cursor_position, vt52_normal_state },
+ { 'I', >erm::index_up, vt52_normal_state },
+ { 'F', 0, vt52_normal_state }, // graphics mode
+ { 'G', 0, vt52_normal_state }, // ASCII mode
+ { 'Z', >erm::vt52_ident, vt52_normal_state }, // identify
+ { '<', 0, normal_state },
+ { -1, 0, vt52_normal_state }};
+
+StateOption GTerm::vt52_cursory_state[] = {
+ { -1, >erm::vt52_cursory, vt52_cursorx_state } };
+
+StateOption GTerm::vt52_cursorx_state[] = {
+ { -1, >erm::vt52_cursorx, vt52_normal_state } };
+
--- /dev/null
+/*
+ taTelnet - A cross-platform telnet program.
+ Copyright (c) 2000 Derry Bryson
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifdef __GNUG__
+ #pragma implementation "wxterm.h"
+#endif
+
+// For compilers that support precompilation, includes "wx/wx.h".
+#include "wx/wxprec.h"
+
+#ifdef __BORLANDC__
+ #pragma hdrstop
+#endif
+
+#include <wx/timer.h>
+#include <wx/event.h>
+#include <wx/bitmap.h>
+#include <wx/brush.h>
+#include <wx/cursor.h>
+#include <wx/dcclient.h>
+#include <wx/log.h>
+#include <wx/pen.h>
+#include <wx/settings.h>
+#include <wx/utils.h>
+
+#include <ctype.h>
+
+#include "../GTerm/gterm.hpp"
+#include "wxterm.h"
+
+
+
+#define CURSOR_BLINK_DEFAULT_TIMEOUT 300
+#define CURSOR_BLINK_MAX_TIMEOUT 2000
+
+/*
+** Keycode translation tables
+*/
+wxTerm::TermKeyMap wxTerm::keyMapTable[] =
+{
+ { WXK_BACK, GTerm::KEY_BACK },
+ { WXK_TAB, GTerm::KEY_TAB },
+ { WXK_RETURN, GTerm::KEY_RETURN },
+ { WXK_ESCAPE, GTerm::KEY_ESCAPE },
+ { WXK_SPACE, GTerm::KEY_SPACE },
+ { WXK_LEFT, GTerm::KEY_LEFT },
+ { WXK_UP, GTerm::KEY_UP },
+ { WXK_RIGHT, GTerm::KEY_RIGHT },
+ { WXK_DOWN, GTerm::KEY_DOWN },
+// { WXK_DIVIDE, GTerm::KEY_DIVIDE },
+// { WXK_MULTIPLY, GTerm::KEY_MULTIPLY },
+// { WXK_SUBTRACT, GTerm::KEY_SUBTRACT },
+// { WXK_ADD, GTerm::KEY_ADD },
+ { WXK_HOME, GTerm::KEY_HOME },
+ { WXK_END, GTerm::KEY_END },
+ { WXK_PAGEUP, GTerm::KEY_PAGEUP },
+ { WXK_PAGEDOWN, GTerm::KEY_PAGEDOWN },
+ { WXK_INSERT, GTerm::KEY_INSERT },
+ { WXK_DELETE, GTerm::KEY_DELETE },
+// { WXK_NEXT, GTerm::KEY_NEXT },
+// { WXK_PRIOR, GTerm::KEY_PRIOR },
+// { WXK_NUMPAD0, GTerm::KEY_NUMPAD0 },
+// { WXK_NUMPAD1, GTerm::KEY_NUMPAD1 },
+// { WXK_NUMPAD2, GTerm::KEY_NUMPAD2 },
+// { WXK_NUMPAD3, GTerm::KEY_NUMPAD3 },
+// { WXK_NUMPAD4, GTerm::KEY_NUMPAD4 },
+// { WXK_NUMPAD5, GTerm::KEY_NUMPAD5 },
+// { WXK_NUMPAD6, GTerm::KEY_NUMPAD6 },
+// { WXK_NUMPAD7, GTerm::KEY_NUMPAD7 },
+// { WXK_NUMPAD8, GTerm::KEY_NUMPAD8 },
+// { WXK_NUMPAD9, GTerm::KEY_NUMPAD9 },
+// { WXK_DECIMAL, GTerm::KEY_NUMPAD_DECIMAL },
+ { WXK_F1, GTerm::KEY_F1 },
+ { WXK_F2, GTerm::KEY_F2 },
+ { WXK_F3, GTerm::KEY_F3 },
+ { WXK_F4, GTerm::KEY_F4 },
+ { WXK_F5, GTerm::KEY_F5 },
+ { WXK_F6, GTerm::KEY_F6 },
+ { WXK_F7, GTerm::KEY_F7 },
+ { WXK_F8, GTerm::KEY_F8 },
+ { WXK_F9, GTerm::KEY_F9 },
+ { WXK_F10, GTerm::KEY_F10 },
+ { WXK_F11, GTerm::KEY_F11 },
+ { WXK_F12, GTerm::KEY_F12 },
+ { (wxKeyCode)0, GTerm::KEY_NULL }
+};
+
+static unsigned char
+ xCharMap[] =
+ {
+ 0, // 0
+ 1, // 1
+ 2, // 2
+ 3, // 3
+ 1, // 4
+ 5, // 5
+ 6, // 6
+ 7, // 7
+ 8, // 8
+ 9, // 9
+ 10, // 10
+ 11, // 11
+ 12, // 12
+ 13, // 13
+ 14, // 14
+ 15, // 15
+ 62, // 16
+ 60, // 17
+ 18, // 18
+ 19, // 19
+ 20, // 20
+ 21, // 21
+ 22, // 22
+ 23, // 23
+ 24, // 24
+ 25, // 25
+ 26, // 26
+ 27, // 27
+ 28, // 28
+ 29, // 29
+ 94, // 30
+ 31, // 31
+ 32, // 32
+ 33, // 33
+ 34, // 34
+ 35, // 35
+ 36, // 36
+ 37, // 37
+ 38, // 38
+ 39, // 39
+ 40, // 40
+ 41, // 41
+ 42, // 42
+ 43, // 43
+ 44, // 44
+ 45, // 45
+ 46, // 46
+ 47, // 47
+ 48, // 48
+ 49, // 49
+ 50, // 50
+ 51, // 51
+ 52, // 52
+ 53, // 53
+ 54, // 54
+ 55, // 55
+ 56, // 56
+ 57, // 57
+ 58, // 58
+ 59, // 59
+ 60, // 60
+ 61, // 61
+ 62, // 62
+ 63, // 63
+ 64, // 64
+ 65, // 65
+ 66, // 66
+ 67, // 67
+ 68, // 68
+ 69, // 69
+ 70, // 70
+ 71, // 71
+ 72, // 72
+ 73, // 73
+ 74, // 74
+ 75, // 75
+ 76, // 76
+ 77, // 77
+ 78, // 78
+ 79, // 79
+ 80, // 80
+ 81, // 81
+ 82, // 82
+ 83, // 83
+ 84, // 84
+ 85, // 85
+ 86, // 86
+ 87, // 87
+ 88, // 88
+ 89, // 89
+ 90, // 90
+ 91, // 91
+ 92, // 92
+ 93, // 93
+ 94, // 94
+ 95, // 95
+ 96, // 96
+ 97, // 97
+ 98, // 98
+ 99, // 99
+ 100, // 100
+ 101, // 101
+ 102, // 102
+ 103, // 103
+ 104, // 104
+ 105, // 105
+ 106, // 106
+ 107, // 107
+ 108, // 108
+ 109, // 109
+ 110, // 110
+ 111, // 111
+ 112, // 112
+ 113, // 113
+ 114, // 114
+ 115, // 115
+ 116, // 116
+ 117, // 117
+ 118, // 118
+ 119, // 119
+ 120, // 120
+ 121, // 121
+ 122, // 122
+ 123, // 123
+ 124, // 124
+ 125, // 125
+ 126, // 126
+ 127, // 127
+ 128, // 128
+ 129, // 129
+ 130, // 130
+ 131, // 131
+ 132, // 132
+ 133, // 133
+ 134, // 134
+ 135, // 135
+ 136, // 136
+ 137, // 137
+ 138, // 138
+ 139, // 139
+ 140, // 140
+ 141, // 141
+ 142, // 142
+ 143, // 143
+ 144, // 144
+ 145, // 145
+ 146, // 146
+ 147, // 147
+ 148, // 148
+ 149, // 149
+ 150, // 150
+ 151, // 151
+ 152, // 152
+ 153, // 153
+ 154, // 154
+ 155, // 155
+ 156, // 156
+ 157, // 157
+ 158, // 158
+ 159, // 159
+ 160, // 160
+ 161, // 161
+ 162, // 162
+ 163, // 163
+ 164, // 164
+ 165, // 165
+ 166, // 166
+ 167, // 167
+ 168, // 168
+ 169, // 169
+ 170, // 170
+ 171, // 171
+ 172, // 172
+ 173, // 173
+ 174, // 174
+ 175, // 175
+ 2, // 176
+ 2, // 177
+ 2, // 178
+ 25, // 179
+ 22, // 180
+ 22, // 181
+ 22, // 182
+ 12, // 183
+ 12, // 184
+ 22, // 185
+ 25, // 186
+ 12, // 187
+ 11, // 188
+ 11, // 189
+ 11, // 190
+ 12, // 191
+ 14, // 192
+ 23, // 193
+ 24, // 194
+ 21, // 195
+ 18, // 196
+ 15, // 197
+ 21, // 198
+ 21, // 199
+ 14, // 200
+ 13, // 201
+ 23, // 202
+ 24, // 203
+ 21, // 204
+ 18, // 205
+ 15, // 206
+ 23, // 207
+ 23, // 208
+ 24, // 209
+ 24, // 210
+ 14, // 211
+ 14, // 212
+ 13, // 213
+ 13, // 214
+ 15, // 215
+ 15, // 216
+ 11, // 217
+ 13, // 218
+ 0, // 219
+ 220, // 220
+ 221, // 221
+ 222, // 222
+ 223, // 223
+ 224, // 224
+ 225, // 225
+ 226, // 226
+ 227, // 227
+ 228, // 228
+ 229, // 229
+ 230, // 230
+ 231, // 231
+ 232, // 232
+ 233, // 233
+ 234, // 234
+ 235, // 235
+ 236, // 236
+ 237, // 237
+ 238, // 238
+ 239, // 239
+ 240, // 240
+ 241, // 241
+ 242, // 242
+ 243, // 243
+ 244, // 244
+ 245, // 245
+ 246, // 246
+ 247, // 247
+ 248, // 248
+ 249, // 249
+ 250, // 250
+ 251, // 251
+ 252, // 252
+ 253, // 253
+ 254, // 254
+ 255 // 255
+ };
+
+BEGIN_EVENT_TABLE(wxTerm, wxWindow)
+ EVT_PAINT (wxTerm::OnPaint)
+ EVT_CHAR (wxTerm::OnChar)
+ EVT_LEFT_DOWN (wxTerm::OnLeftDown)
+ EVT_LEFT_UP (wxTerm::OnLeftUp)
+ EVT_MOTION (wxTerm::OnMouseMove)
+ EVT_TIMER (-1, wxTerm::OnTimer)
+#if 0
+ EVT_KEY_DOWN(wxTerm::OnKeyDown)
+#endif
+
+ EVT_SIZE (wxTerm::OnSize)
+ EVT_SET_FOCUS (wxTerm::OnGainFocus)
+ EVT_KILL_FOCUS (wxTerm::OnLoseFocus)
+END_EVENT_TABLE()
+
+wxTerm::wxTerm(wxWindow* parent, wxWindowID id,
+ const wxPoint& pos,
+ int width, int height,
+ const wxString& name) :
+ wxWindow(parent, id, pos, wxSize(-1, -1), wxWANTS_CHARS, name),
+ GTerm(width, height)
+{
+ int
+ i;
+
+ m_inUpdateSize = false;
+ m_init = 1;
+
+ m_curDC = 0;
+
+ m_charsInLine = width;
+ m_linesDisplayed = height;
+
+ m_selecting = FALSE;
+ m_selx1 = m_sely1 = m_selx2 = m_sely2 = 0;
+ m_marking = FALSE;
+ m_curX = -1;
+ m_curY = -1;
+ m_curBlinkRate = CURSOR_BLINK_DEFAULT_TIMEOUT;
+ m_timer.SetOwner(this);
+ if(m_curBlinkRate)
+ m_timer.Start(m_curBlinkRate);
+
+ m_boldStyle = COLOR;
+
+ GetDefVTColors(m_vt_colors);
+ GetDefPCColors(m_pc_colors);
+
+ m_colors = m_vt_colors;
+
+ SetBackgroundColour(m_colors[0]);
+
+ for(i = 0; i < 16; i++)
+ m_vt_colorPens[i] = wxPen(m_vt_colors[i], 1, wxSOLID);
+
+ for(i = 0; i < 16; i++)
+ m_pc_colorPens[i] = wxPen(m_pc_colors[i], 1, wxSOLID);
+
+ m_colorPens = m_vt_colorPens;
+
+ m_width = width;
+ m_height = height;
+
+ m_printerFN = 0;
+ m_printerName = 0;
+
+
+
+ m_normalFont = GetFont();
+ m_underlinedFont = GetFont();
+ m_underlinedFont.SetUnderlined(TRUE);
+ m_boldFont = GetFont();
+ m_boldFont.SetWeight(wxBOLD);
+ m_boldUnderlinedFont = m_boldFont;
+ m_boldUnderlinedFont.SetUnderlined(TRUE);
+
+ m_bitmap = 0;
+
+
+ //ResizeTerminal(width, height);
+
+
+ //SetVirtualSize(m_charWidth * 80, m_charHeight * 100);
+ //SetScrollRate(m_charWidth, m_charHeight);
+
+ m_init = 0;
+
+ SetCursor(wxCursor(wxCURSOR_IBEAM));
+
+ wxFont monospacedFont(10, wxMODERN, wxNORMAL, wxNORMAL, false, "Courier New");
+
+ SetFont(monospacedFont);
+
+ // 10pt Courier New is 8 pixels wide and 16 pixels high... set up
+ // a default client size to match
+ SetClientSize(m_charsInLine * 8, m_linesDisplayed * 16);
+ UpdateSize();
+}
+
+wxTerm::~wxTerm()
+{
+ if(m_bitmap)
+ {
+ m_memDC.SelectObject(wxNullBitmap);
+ delete m_bitmap;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SetBoldStyle
+/// Sets the bold style for the terminal
+///
+/// @param boldStyle wxTerm::BOLDSTYLE & The style to be used
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SetBoldStyle(wxTerm::BOLDSTYLE boldStyle)
+{
+// wxColour colors[16];
+
+ if(boldStyle == DEFAULT)
+ boldStyle = COLOR;
+
+ m_boldStyle = boldStyle;
+// GetDefVTColors(colors, m_boldStyle);
+// SetVTColors(colors);
+ Refresh();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SetFont
+/// Sets the font for the terminal
+///
+/// @param font const wxFont & The font to be used
+///
+/// @return bool Unused (returns true)
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+bool
+wxTerm::SetFont(const wxFont& font)
+{
+ m_init = 1;
+
+ wxWindow::SetFont(font);
+ m_normalFont = font;
+ m_underlinedFont = font;
+ m_underlinedFont.SetUnderlined(TRUE);
+ m_boldFont = GetFont();
+ m_boldFont.SetWeight(wxBOLD);
+ m_boldUnderlinedFont = m_boldFont;
+ m_boldUnderlinedFont.SetUnderlined(TRUE);
+ m_init = 0;
+
+ ResizeTerminal(m_width, m_height);
+ Refresh();
+
+ return TRUE;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public GetDfVTColors
+/// Gets the colors for a VT100 terminal
+///
+/// @param colors wxColour [] The colors that need to be assigned to
+/// @param boldStyle wxTerm::BOLDSTYLE The bold style used in the terminal
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::GetDefVTColors(wxColour colors[16], wxTerm::BOLDSTYLE boldStyle)
+{
+ if(boldStyle == DEFAULT)
+ boldStyle = m_boldStyle;
+
+ if(boldStyle != COLOR)
+ {
+ colors[0] = wxColour(0, 0, 0); // black
+ colors[1] = wxColour(255, 0, 0); // red
+ colors[2] = wxColour(0, 255, 0); // green
+ colors[3] = wxColour(255, 0, 255); // yellow
+ colors[4] = wxColour(0, 0, 255); // blue
+ colors[5] = wxColour(255, 255, 0); // magenta
+ colors[6] = wxColour(0, 255, 255); // cyan
+ colors[7] = wxColour(255, 255, 255); // white
+ colors[8] = wxColour(0, 0, 0); // black
+ colors[9] = wxColour(255, 0, 0); // red
+ colors[10] = wxColour(0, 255, 0); // green
+ colors[11] = wxColour(255, 0, 255); // yellow
+ colors[12] = wxColour(0, 0, 255); // blue
+ colors[13] = wxColour(255, 255, 0); // magenta
+ colors[14] = wxColour(0, 255, 255); // cyan
+ colors[15] = wxColour(255, 255, 255); // white
+ }
+ else
+ {
+ colors[0] = wxColour(0, 0, 0); // black
+ colors[1] = wxColour(170, 0, 0); // red
+ colors[2] = wxColour(0, 170, 0); // green
+ colors[3] = wxColour(170, 0, 170); // yellow
+ colors[4] = wxColour(0, 0, 170); // blue
+ colors[5] = wxColour(170, 170, 0); // magenta
+ colors[6] = wxColour(0, 170, 170); // cyan
+ colors[7] = wxColour(192, 192, 192); // white
+// colors[7] = wxColour(170, 170, 170); // white
+#if 0
+ colors[8] = wxColour(85, 85, 85); // bold black
+ colors[9] = wxColour(255, 85, 85); // bold red
+ colors[10] = wxColour(85, 255, 85); // bold green
+ colors[11] = wxColour(255, 85, 255); // bold yellow
+ colors[12] = wxColour(85, 85, 255); // bold blue
+ colors[13] = wxColour(255, 255, 85); // bold magenta
+ colors[14] = wxColour(85, 255, 255); // bold cyan
+ colors[15] = wxColour(255, 255, 255); // bold white
+#else
+ colors[8] = wxColour(85, 85, 85); // bold black
+ colors[9] = wxColour(255, 0, 0); // bold red
+ colors[10] = wxColour(0, 255, 0); // bold green
+ colors[11] = wxColour(255, 0, 255); // bold yellow
+ colors[12] = wxColour(0, 0, 255); // bold blue
+ colors[13] = wxColour(255, 255, 0); // bold magenta
+ colors[14] = wxColour(0, 255, 255); // bold cyan
+ colors[15] = wxColour(255, 255, 255); // bold white
+#endif
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public GetVTColors
+/// Retrieves a copy of the VT100 colors
+///
+/// @param colors wxColour [] An array to be filled with the VT100 colors
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::GetVTColors(wxColour colors[16])
+{
+ int
+ i;
+
+ for(i = 0; i < 16; i++)
+ colors[i] = m_vt_colors[i];
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SetVTColors
+/// Sets the VT100 colors
+///
+/// @param colors wxColour [] The new colors to be used
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SetVTColors(wxColour colors[16])
+{
+ int
+ i;
+
+ m_init = 1;
+ for(i = 0; i < 16; i++)
+ m_vt_colors[i] = colors[i];
+
+ if(!(GetMode() & PC))
+ SetBackgroundColour(m_vt_colors[0]);
+
+ for(i = 0; i < 16; i++)
+ m_vt_colorPens[i] = wxPen(m_vt_colors[i], 1, wxSOLID);
+ m_init = 0;
+
+ Refresh();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public GetDefPCColors
+/// Gets the default PC colors
+///
+/// @param colors wxColour [] Filled with the colors to be used
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::GetDefPCColors(wxColour colors[16])
+{
+#if 0
+ /*
+ ** These colors need tweaking. I'm sure they are not correct.
+ */
+ colors[0] = wxColour(0, 0, 0); // black
+ colors[1] = wxColour(0, 0, 128); // blue
+ colors[2] = wxColour(0, 128, 0); // green
+ colors[3] = wxColour(0, 128, 128); // cyan
+ colors[4] = wxColour(128, 0, 0); // red
+ colors[5] = wxColour(128, 0, 128); // magenta
+ colors[6] = wxColour(128, 128, 0); // brown
+ colors[7] = wxColour(128, 128, 128); // white
+ colors[8] = wxColour(64, 64, 64); // gray
+ colors[9] = wxColour(0, 0, 255); // lt blue
+ colors[10] = wxColour(0, 255, 0); // lt green
+ colors[11] = wxColour(0, 255, 255); // lt cyan
+ colors[12] = wxColour(255, 0, 0); // lt red
+ colors[13] = wxColour(255, 0, 255); // lt magenta
+ colors[14] = wxColour(255, 255, 0); // yellow
+ colors[15] = wxColour(255, 255, 255); // white
+#else
+ /*
+ ** These are much better
+ */
+ colors[0] = wxColour(0, 0, 0); // black
+ colors[1] = wxColour(0, 0, 170); // blue
+ colors[2] = wxColour(0, 170, 0); // green
+ colors[3] = wxColour(0, 170, 170); // cyan
+ colors[4] = wxColour(170, 0, 0); // red
+ colors[5] = wxColour(170, 0, 170); // magenta
+ colors[6] = wxColour(170, 170, 0); // brown
+ colors[7] = wxColour(170, 170, 170); // white
+#if 0
+ colors[8] = wxColour(85, 85, 85); // gray
+ colors[9] = wxColour(85, 85, 255); // lt blue
+ colors[10] = wxColour(85, 255, 85); // lt green
+ colors[11] = wxColour(85, 255, 255); // lt cyan
+ colors[12] = wxColour(255, 85, 85); // lt red
+ colors[13] = wxColour(255, 85, 255); // lt magenta
+ colors[14] = wxColour(255, 255, 85); // yellow
+ colors[15] = wxColour(255, 255, 255); // white
+#else
+ colors[8] = wxColour(50, 50, 50); // gray
+ colors[9] = wxColour(0, 0, 255); // lt blue
+ colors[10] = wxColour(0, 255, 0); // lt green
+ colors[11] = wxColour(0, 255, 255); // lt cyan
+ colors[12] = wxColour(255, 0, 0); // lt red
+ colors[13] = wxColour(255, 0, 255); // lt magenta
+ colors[14] = wxColour(255, 255, 0); // yellow
+ colors[15] = wxColour(255, 255, 255); // white
+#endif
+#endif
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public GetPCColors
+/// Retrieves the PC colors
+///
+/// @param colors wxColour [] Filled with the PC colors
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::GetPCColors(wxColour colors[16])
+{
+ int
+ i;
+
+ for(i = 0; i < 16; i++)
+ colors[i] = m_pc_colors[i];
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SetPCColors
+/// Sets the PC colors
+///
+/// @param colors wxColour [] The new colors to be used
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SetPCColors(wxColour colors[16])
+{
+ int
+ i;
+
+ m_init = 1;
+ for(i = 0; i < 16; i++)
+ m_pc_colors[i] = colors[i];
+
+ if(GetMode() & PC)
+ SetBackgroundColour(m_pc_colors[0]);
+
+ for(i = 0; i < 16; i++)
+ m_pc_colorPens[i] = wxPen(m_pc_colors[i], 1, wxSOLID);
+ m_init = 0;
+
+ Refresh();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SetCursorBlinkRate
+/// Sets how often the cursor blinks
+///
+/// @param rate int How many milliseconds between blinks
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SetCursorBlinkRate(int rate)
+{
+ if(rate < 0 || rate > CURSOR_BLINK_MAX_TIMEOUT)
+ return;
+
+ m_init = 1;
+ if(rate != m_curBlinkRate)
+ {
+ m_curBlinkRate = rate;
+ if(!m_curBlinkRate)
+ m_timer.Stop();
+ else
+ m_timer.Start(m_curBlinkRate);
+ }
+ m_init = 0;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnChar
+/// Handles user keyboard input and begins processing the server's response
+///
+/// @param event wxKeyEvent & The generated key event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnChar(wxKeyEvent& event)
+{
+ if(!(GetMode() & PC) && event.AltDown())
+ event.Skip();
+ else
+ {
+
+ int
+ rc,
+ keyCode = 0,
+ len;
+
+ unsigned char
+ buf[10];
+
+ /*
+ ** Map control characters
+ */
+ if(event.ControlDown())
+ {
+ if(event.GetKeyCode() >= 'a' && event.GetKeyCode() <= 'z')
+ keyCode = event.GetKeyCode() - 'a' + 1;
+ else if(event.GetKeyCode() >= '[' && event.GetKeyCode() <= '_')
+ keyCode = event.GetKeyCode() - '[' + 0x1b;
+ else if(event.GetKeyCode() == '6')
+ keyCode = 0x1e;
+ else if(event.GetKeyCode() == '-')
+ keyCode = 0x1f;
+ }
+
+ if(!keyCode && !(keyCode = MapKeyCode((int)event.GetKeyCode())))
+ {
+ /*
+ ** If the keycode wasn't mapped in the table and it is a special
+ ** key, then we just ignore it.
+ */
+ if(event.GetKeyCode() >= WXK_START)
+ {
+ event.Skip();
+ return;
+ }
+ /*
+ ** Otherwise, it must just be an ascii character
+ */
+ keyCode = (int)event.GetKeyCode();
+ }
+
+ if(GetMode() & PC)
+ rc = TranslateKeyCode(keyCode, &len, (char *)buf, event.ShiftDown(),
+ event.ControlDown(), event.AltDown());
+ else
+ rc = TranslateKeyCode(keyCode, &len, (char *)buf);
+
+ if(rc)
+ {
+ if((GetMode() & NEWLINE) && !(GetMode() & PC) && (buf[len - 1] == 10))
+ {
+ buf[len - 1] = 13;
+ buf[len] = 10;
+ len++;
+ }
+ ProcessOutput(len, buf);
+ if((GetMode() & LOCALECHO) && !(GetMode() & PC))
+ ProcessInput(len, buf);
+ }
+ else if(!(GetMode() & PC))
+ {
+ if((GetMode() & NEWLINE) && !(GetMode() & PC) && (keyCode == 10))
+ {
+ len = 2;
+ buf[0] = 13;
+ buf[1] = keyCode;
+ }
+ else
+ {
+ len = 1;
+ buf[0] = keyCode;
+ }
+ ProcessOutput(len, buf);
+ if((GetMode() & LOCALECHO) && !(GetMode() & PC))
+ ProcessInput(len, buf);
+ }
+ else
+ event.Skip();
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnKeyDown
+/// Appears to be unused
+///
+/// @param event wxKeyEvent & The generated key event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnKeyDown(wxKeyEvent& event)
+{
+ if(!(GetMode() & PC) && event.AltDown())
+ event.Skip();
+ else if(event.AltDown())
+ {
+// wxLogMessage("OnKeyDown() got KeyCode = %d", event.KeyCode());
+// if(event.KeyCode() != 309)
+// OnChar(event);
+ }
+ else
+ event.Skip();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnPaint
+/// Redraws the terminal widget
+///
+/// @param event wxPaintEvent & The generated paint event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnPaint(wxPaintEvent& WXUNUSED(event))
+{
+ wxPaintDC
+ dc(this);
+
+ m_curDC = &dc;
+ ExposeArea(0, 0, m_width, m_height);
+ m_curDC = 0;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnLeftDown
+/// Begins selection of terminal text
+///
+/// @param event wxMouseEvent & The generated mouse event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnLeftDown(wxMouseEvent& event)
+{
+ SetFocus();
+
+ ClearSelection();
+ m_selx1 = m_selx2 = event.GetX() / m_charWidth;
+ m_sely1 = m_sely2 = event.GetY() / m_charHeight;
+ m_selecting = TRUE;
+ CaptureMouse();
+
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnLeftUp
+/// Ends text selection
+///
+/// @param event wxMouseEvent & The generated mouse event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnLeftUp(wxMouseEvent& event)
+{
+
+ m_selecting = FALSE;
+ if(GetCapture() == this)
+ {
+ ReleaseMouse();
+ }
+
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnMouseMove
+/// Changes the selection if the mouse button is down
+///
+/// @param event wxMouseEvent & The generated mouse event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnMouseMove(wxMouseEvent& event)
+{
+
+ if(m_selecting)
+ {
+ m_selx2 = event.GetX() / m_charWidth;
+ if(m_selx2 >= Width())
+ m_selx2 = Width() - 1;
+ m_sely2 = event.GetY() / m_charHeight;
+ if(m_sely2 >= Height())
+ m_sely2 = Height() - 1;
+
+ MarkSelection();
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public ClearSelection
+/// De-selects all selected text
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::ClearSelection()
+{
+ int
+ x,
+ y;
+
+ wxClientDC
+ *dc = 0;
+
+ m_selx1 = m_sely1 = m_selx2 = m_sely2 = 0;
+
+ if(!m_curDC)
+ {
+ dc = new wxClientDC(this);
+ m_curDC = dc;
+ }
+
+ for(y = 0; y < Height(); y++)
+ for(x = 0; x < Width(); x++)
+ Select(x, y, 0);
+
+ if(dc)
+ {
+ this->wxWindow::Update();
+
+ m_curDC = 0;
+ delete dc;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private MarkSelection
+/// Does _something_ as far as selecting text, but not really sure... used for SelectAll, I think
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::MarkSelection()
+{
+ int
+ x,
+ y;
+
+ wxClientDC
+ *dc = 0;
+
+ m_marking = TRUE;
+
+ if(!m_curDC)
+ {
+ dc = new wxClientDC(this);
+ m_curDC = dc;
+ }
+
+ for(y = 0; y < Height(); y++)
+ for(x = 0; x < Width(); x++)
+ Select(x, y, 0);
+
+ if(m_sely1 == m_sely2)
+ {
+ if(m_selx1 >= m_selx2)
+ for(x = m_selx1; x <= m_selx2; x++)
+ Select(x, m_sely1, 1);
+ else
+ for(x = m_selx2; x >= m_selx1; x--)
+ Select(x, m_sely1, 1);
+ }
+ else if(m_sely1 < m_sely2)
+ {
+ for(x = m_selx1; x < Width(); x++)
+ Select(x, m_sely1, 1);
+
+ for(y = m_sely1 + 1; y < m_sely2; y++)
+ for(x = 0; x < Width(); x++)
+ Select(x, y, 1);
+
+ for(x = 0; x <= m_selx2; x++)
+ Select(x, m_sely2, 1);
+ }
+ else
+ {
+ for(x = 0; x <= m_selx1; x++)
+ Select(x, m_sely1, 1);
+
+ for(y = m_sely2 + 1; y < m_sely1; y++)
+ for(x = 0; x < Width(); x++)
+ Select(x, y, 1);
+
+ for(x = m_selx2; x < Width(); x++)
+ Select(x, m_sely2, 1);
+ }
+
+ this->wxWindow::Update();
+
+ if(dc)
+ {
+ m_curDC = 0;
+ delete dc;
+ }
+
+ m_marking = FALSE;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public HasSelection
+/// Checks if any text is selected
+///
+/// @return bool Whether or not there's any text selected
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+bool
+wxTerm::HasSelection()
+{
+ return(m_selx1 != m_selx2 || m_sely1 != m_sely2);
+}
+
+wxString
+//////////////////////////////////////////////////////////////////////////////
+/// public GetSelection
+/// Returns the selected text
+///
+/// @return wxString The selected text
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+wxTerm::GetSelection()
+{
+ int
+ x1,
+ y1,
+ x2,
+ y2;
+
+ wxString
+ sel;
+
+ if(m_sely1 <= m_sely2)
+ {
+ x1 = m_selx1;
+ y1 = m_sely1;
+ x2 = m_selx2;
+ y2 = m_sely2;
+ }
+ else
+ {
+ x1 = m_selx2;
+ y1 = m_sely2;
+ x2 = m_selx1;
+ y2 = m_sely1;
+ }
+
+ while(x1 != x2 || y1 != y2)
+ {
+ if(GetChar(x1, y1))
+ sel.Append(GetChar(x1, y1));
+
+ x1++;
+ if(x1 == Width())
+ {
+ sel.Append('\n');
+ x1 = 0;
+ y1++;
+ }
+ }
+ if(GetChar(x1, y1))
+ sel.Append(GetChar(x1, y1));
+
+ return sel;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public SelectAll
+/// Selects the whole terminal
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SelectAll()
+{
+ m_selx1 = 0;
+ m_sely1 = 0;
+ m_selx2 = Width() - 1;
+ m_sely2 = Height() - 1;
+ MarkSelection();
+}
+
+/*
+** GTerm stuff
+*/
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual DrawText
+/// Responsible for actually drawing the terminal text on the widget. This virtual
+/// function is called from GTerm::update_changes.
+///
+/// @param fg_color int The index of the foreground color
+/// @param bg_color int The index of the background color
+/// @param flags int Modifiers for drawing the text
+/// @param x int The x position in character cells
+/// @param y int The y position in character cells
+/// @param len int The number of characters to draw
+/// @param string unsigned char * The characters to draw
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::DrawText(int fg_color, int bg_color, int flags,
+ int x, int y, int len, unsigned char *string)
+{
+ int
+ t;
+
+ if(flags & BOLD && m_boldStyle == COLOR)
+ fg_color = (fg_color % 8) + 8;
+
+ if(flags & SELECTED)
+ {
+ fg_color = 0;
+ bg_color = 15;
+ }
+
+ if(flags & INVERSE)
+ {
+ t = fg_color;
+ fg_color = bg_color;
+ bg_color = t;
+ }
+
+ if(!m_curDC)
+ return;
+
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ int
+ i;
+
+ for(i = 0; string[i]; i++)
+ string[i] = xCharMap[string[i]];
+#endif
+
+ wxString
+ str(string, len);
+
+ if(m_boldStyle != FONT)
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_underlinedFont);
+ else
+ m_curDC->SetFont(m_normalFont);
+ }
+ else
+ {
+ if(flags & BOLD)
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_boldUnderlinedFont);
+ else
+ m_curDC->SetFont(m_boldFont);
+ }
+ else
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_underlinedFont);
+ else
+ m_curDC->SetFont(m_normalFont);
+ }
+ }
+
+ x = x * m_charWidth;
+ y = y * m_charHeight;
+ m_curDC->SetBackgroundMode(wxSOLID);
+ m_curDC->SetTextBackground(m_colors[bg_color]);
+ m_curDC->SetTextForeground(m_colors[fg_color]);
+ m_curDC->DrawText(str, x, y);
+ if(flags & BOLD && m_boldStyle == OVERSTRIKE)
+ {
+ m_curDC->SetBackgroundMode(wxTRANSPARENT);
+ m_curDC->DrawText(str, x + 1, y);
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private DoDrawCursor
+/// Does the actual work of drawing the cursor
+///
+/// @param fg_color int The index of the foreground color
+/// @param bg_color int The index of the background color
+/// @param flags int Modifier flags
+/// @param x int The x position of the cursor, in characters
+/// @param y int The y position of the cursor, in characters
+/// @param c unsigned char The character the cursor is over
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::DoDrawCursor(int fg_color, int bg_color, int flags,
+ int x, int y, unsigned char c)
+{
+
+ if(flags & BOLD && m_boldStyle == COLOR)
+ fg_color = (fg_color % 8) + 8;
+
+ if(flags & INVERSE)
+ {
+ int t = fg_color;
+ fg_color = bg_color;
+ bg_color = t;
+ }
+
+ if(!m_curDC)
+ return;
+
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ c = xCharMap[c];
+#endif
+
+ wxString
+ str((char)c);
+
+ if(m_boldStyle != FONT)
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_underlinedFont);
+ else
+ m_curDC->SetFont(m_normalFont);
+ }
+ else
+ {
+ if(flags & BOLD)
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_boldUnderlinedFont);
+ else
+ m_curDC->SetFont(m_boldFont);
+ }
+ else
+ {
+ if(flags & UNDERLINE)
+ m_curDC->SetFont(m_underlinedFont);
+ else
+ m_curDC->SetFont(m_normalFont);
+ }
+ }
+
+ x = x * m_charWidth;
+ y = y * m_charHeight;
+ m_curDC->SetBackgroundMode(wxSOLID);
+ m_curDC->SetTextBackground(m_colors[fg_color]);
+ m_curDC->SetTextForeground(m_colors[bg_color]);
+ m_curDC->DrawText(str, x, y);
+ if(flags & BOLD && m_boldStyle == OVERSTRIKE)
+ m_curDC->DrawText(str, x + 1, y);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual DrawCursor
+/// Draws the cursor on the terminal widget. This virtual function is called
+/// from GTerm::update_changes.
+///
+/// @param fg_color int The index of the foreground color
+/// @param bg_color int The index of the background color
+/// @param flags int Modifiers for drawing the cursor
+/// @param x int The x position in character cells
+/// @param y int The y position in character cells
+/// @param c unsigned char The character that underlies the cursor
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::DrawCursor(int fg_color, int bg_color, int flags,
+ int x, int y, unsigned char c)
+{
+ m_curX = x;
+ m_curY = y;
+ m_curFG = fg_color;
+ m_curBG = bg_color,
+ m_curFlags = flags;
+ m_curChar = c;
+
+
+
+ if(m_timer.IsRunning())
+ m_timer.Stop();
+ DoDrawCursor(fg_color, bg_color, flags, x, y, c);
+ if(m_curBlinkRate)
+ {
+ m_timer.Start(m_curBlinkRate);
+ m_curState = 1;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnTimer
+/// Blinks the cursor each time it goes off
+///
+/// @param event wxTimerEvent & The generated timer event
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::OnTimer(wxTimerEvent& WXUNUSED(event))
+{
+ wxClientDC
+ *dc = 0;
+
+ if(m_init)
+ return;
+
+ if(m_curX == -1 || m_curY == -1)
+ return;
+
+ if(GetMode() & CURSORINVISIBLE)
+ {
+ //wxLogDebug("Skipping cursor");
+ return;
+ }
+ //wxLogDebug("Drawing cursor");
+ if(!m_curDC)
+ {
+ dc = new wxClientDC(this);
+ m_curDC = dc;
+ }
+
+ if(m_curBlinkRate)
+ {
+ m_curState++;
+ if(m_curState & 1 && m_curX != -1 && m_curY != -1)
+ DoDrawCursor(m_curFG, m_curBG, m_curFlags, m_curX, m_curY, m_curChar);
+ else
+ DoDrawCursor(m_curBG, m_curFG, m_curFlags, m_curX, m_curY, m_curChar);
+ }
+
+ if(dc)
+ {
+ delete dc;
+ m_curDC = 0;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual MoveChars
+/// Moves characters on the screen. This virtual function is called from
+/// GTerm::update_changes.
+///
+/// @param sx int The starting x position, in character cells
+/// @param sy int The starting y position, in character cells
+/// @param dx int The number of character cells to shift in the x direction
+/// @param dy int The number of character cells to shift in the y direction
+/// @param w int The width in characters of the area to be moved
+/// @param h int The height in characters of the area to be moved
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::MoveChars(int sx, int sy, int dx, int dy, int w, int h)
+{
+ if(!m_marking)
+ ClearSelection();
+
+ sx = sx * m_charWidth;
+ sy = sy * m_charHeight;
+ dx = dx * m_charWidth;
+ dy = dy * m_charHeight;
+ w = w * m_charWidth;
+ h = h * m_charHeight;
+
+ m_memDC.Blit(0, 0, w, h, m_curDC, sx, sy);
+ m_curDC->Blit(dx, dy, w, h, &m_memDC, 0, 0);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual ClearChars
+/// Clears a section of characters from the screen. This virtual function
+/// is called from GTerm::update_changes.
+///
+/// @param bg_color int The background color to replace the characters with
+/// @param x int The starting x position, in characters
+/// @param y int The starting y position, in characters
+/// @param w int The width of the area to be cleared, in characters
+/// @param h int The height of the area to be cleared, in characters
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::ClearChars(int bg_color, int x, int y, int w, int h)
+{
+ if(!m_marking)
+ ClearSelection();
+
+ x = x * m_charWidth;
+ y = y * m_charHeight;
+ w = w * m_charWidth;
+ h = h * m_charHeight;
+
+ bool deleteDC = false;
+ if(!m_curDC)
+ {
+ m_curDC = new wxClientDC(this);
+ deleteDC = true;
+ }
+ m_curDC->SetPen(m_colorPens[bg_color]);
+ m_curDC->SetBrush(wxBrush(m_colors[bg_color], wxSOLID));
+ m_curDC->DrawRectangle(x, y, w /* + 1*/, h /*+ 1*/);
+
+ if(deleteDC)
+ {
+ delete m_curDC;
+ m_curDC = 0;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual ModeChange
+/// Changes the drawing mode between VT100 and PC
+///
+/// @param state int The new state
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::ModeChange(int state)
+{
+ ClearSelection();
+
+ if(state & GTerm::PC)
+ {
+ m_colors = m_pc_colors;
+ m_colorPens = m_pc_colorPens;
+ }
+ else
+ {
+ m_colors = m_vt_colors;
+ m_colorPens = m_vt_colorPens;
+ }
+ GTerm/*lnet*/::ModeChange(state);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual Bell
+/// Rings the system bell
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::Bell()
+{
+ wxBell();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public UpdateSize
+/// Updates the terminal's size in characters after it has been resized on the screen.
+///
+/// @return void
+///
+/// @author Mark Erikson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void wxTerm::UpdateSize()
+{
+ // prevent any nasty recursion
+ if(m_inUpdateSize)
+ {
+ return;
+ }
+
+ m_inUpdateSize = true;
+ int charWidth, charHeight;
+
+ wxClientDC* dc = new wxClientDC(this);
+
+ if(!m_curDC)
+ {
+ m_curDC = dc;
+ }
+
+ dc->SetFont(m_normalFont);
+ dc->GetTextExtent("M", &charWidth, &charHeight);
+ wxSize currentClientSize = GetClientSize();
+ int numCharsInLine = currentClientSize.GetX() / charWidth;
+ int numLinesShown = currentClientSize.GetY() / charHeight;
+
+
+
+ if( (numCharsInLine != m_charsInLine) || (numLinesShown != m_linesDisplayed))
+ {
+ wxString message;
+
+ // FINALLY! Finally killed the memory leak! The problem is that somehow a size event
+ // was generating negative numbers for these values, which led to weird things happening.
+ if( (numCharsInLine > 0) && (numLinesShown > 0))
+ {
+ m_charsInLine = numCharsInLine;
+ m_linesDisplayed = numLinesShown;
+ // tell the GTerm core to resize itself
+ ResizeTerminal(numCharsInLine, numLinesShown);
+
+ UpdateRemoteSize(m_charsInLine, m_linesDisplayed);
+ /*
+ wxString remoteResizeCommand = wxString::Format("stty rows %d cols %d", m_linesDisplayed, m_charsInLine);
+ wxLogDebug("Resizing terminal: %s", remoteResizeCommand);
+ wxStringBuffer tempBuffer(remoteResizeCommand, 256);
+ SendBack(tempBuffer);
+ */
+ }
+ }
+
+ m_inUpdateSize = false;
+
+ if(dc)
+ {
+ delete dc;
+ m_curDC = 0;
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual ResizeTerminal
+/// <Resizes the terminal to a given number of characters high and wide
+///
+/// @param width int The new number of characters wide
+/// @param height int The new number of characters high
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::ResizeTerminal(int width, int height)
+{
+ int
+ w,
+ h;
+
+ ClearSelection();
+
+ /*
+ ** Determine window size from current font
+ */
+ wxClientDC
+ dc(this);
+
+ if(m_boldStyle != FONT)
+ dc.SetFont(m_normalFont);
+ else
+ dc.SetFont(m_boldFont);
+ dc.GetTextExtent("M", &m_charWidth, &m_charHeight);
+ w = width * m_charWidth;
+ h = height * m_charHeight;
+
+ /*
+ ** Create our bitmap for copying
+ */
+ if(m_bitmap)
+ {
+ m_memDC.SelectObject(wxNullBitmap);
+ delete m_bitmap;
+ }
+ m_bitmap = new wxBitmap(w, h);
+ m_memDC.SelectObject(*m_bitmap);
+
+ /*
+ ** Set window size
+ */
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ SetSize(w, h + 4);
+#else
+ SetSize(w, h);
+#endif
+
+ /*
+ ** Set terminal size
+ */
+ GTerm::ResizeTerminal(width, height);
+ m_width = width;
+ m_height = height;
+
+ /*
+ ** Send event
+ */
+ if(!m_init)
+ {
+ wxCommandEvent e(wxEVT_COMMAND_TERM_RESIZE, GetId());
+ e.SetEventObject(this);
+ GetParent()->GetEventHandler()->ProcessEvent(e);
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual RequestSizeChange
+/// A virtual function, used by GTerm to update the size
+///
+/// @param w int The new width in characters
+/// @param h int The new height in characters
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::RequestSizeChange(int w, int h)
+{
+ ResizeTerminal(w, h);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual ProcessInput
+/// Processes text received from the server
+///
+/// @param len int The number of characters received
+/// @param data unsigned char * The received text
+///
+/// @return void
+///
+/// @remarks This function is *not* safe to call from anywhere but
+/// @remarks the main wxwidgets event loop, as it draws
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::ProcessInput(int len, unsigned char *data)
+{
+ wxClientDC
+ dc(this);
+
+ ClearSelection();
+ m_curDC = &dc;
+ GTerm::ProcessInput(len, data);
+ m_curDC = 0;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private MapKeyCode
+/// Converts from WXWidgets special keycodes to VT100
+/// special keycodes.
+///
+///
+/// @param keyCode int The keycode to check
+///
+/// @return int The returned keycode
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+int
+wxTerm::MapKeyCode(int keyCode)
+{
+ int
+ i;
+
+ for(i = 0; keyMapTable[i].keyCode; i++)
+ if(keyMapTable[i].keyCode == keyCode)
+ return keyMapTable[i].VTKeyCode;
+ return 0;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual SelectPrinter
+/// Selects the printer to be used
+///
+/// @param PrinterName char * The text of the printer name
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::SelectPrinter(char *PrinterName)
+{
+ if(m_printerFN)
+ {
+ if(m_printerName[0] == '#')
+ fclose(m_printerFN);
+ else
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ pclose(m_printerFN);
+#endif
+#if defined(__WXMSW__)
+ fclose(m_printerFN);
+#endif
+
+ m_printerFN = 0;
+ }
+
+ if(m_printerName)
+ {
+ free(m_printerName);
+ m_printerName = 0;
+ }
+
+ if(strlen(PrinterName))
+ {
+ m_printerName = strdup(PrinterName);
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// public virtual PrintChars
+/// Prints stuff to the currently selected printer
+///
+/// @param len int The number of characters
+/// @param data unsigned char * The text
+///
+/// @return void
+///
+/// @author Derry Bryson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void
+wxTerm::PrintChars(int len, unsigned char *data)
+{
+ char
+ pname[100];
+
+ if(!m_printerFN)
+ {
+ if(!m_printerName)
+ return;
+
+ if(m_printerName[0] == '#')
+ {
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ sprintf(pname, "/dev/lp%d", m_printerName[1] - '0');
+#endif
+#if defined(__WXMSW__)
+ sprintf(pname, "lpt%d", m_printerName[1] - '0' + 1);
+#endif
+ m_printerFN = fopen(pname, "wb");
+ }
+ else
+ {
+#if defined(__WXGTK__) || defined(__WXMOTIF__)
+ sprintf(pname, "lpr -P%s", m_printerName);
+ m_printerFN = popen(pname, "w");
+#endif
+#if defined(__WXMSW__)
+ m_printerFN = fopen(m_printerName, "wb");
+#endif
+ }
+ }
+
+ if(m_printerFN)
+ {
+ fwrite(data, len, 1, m_printerFN);
+ }
+}
+
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnGainFocus
+/// Enables the cursor
+///
+/// @param event wxFocusEvent & The generated focus event
+///
+/// @return void
+///
+/// @author Mark Erikson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void wxTerm::OnGainFocus(wxFocusEvent &event)
+{
+ this->clear_mode_flag(CURSORINVISIBLE);
+ //wxLogDebug("TerminalWx Gained focus");
+ GTerm::Update();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnLoseFocus
+/// Disables the cursor
+///
+/// @param event wxFocusEvent & The generated focus event
+///
+/// @return void
+///
+/// @author Mark Erikson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void wxTerm::OnLoseFocus(wxFocusEvent &event)
+{
+ this->set_mode_flag(CURSORINVISIBLE);
+ //wxLogDebug("TerminalWx Lost focus");
+ GTerm::Update();
+}
+
+//////////////////////////////////////////////////////////////////////////////
+/// private OnSize
+/// Lets the terminal resize the text whenever the window is resized
+///
+/// @param event wxSizeEvent & The generated size event
+///
+/// @return void
+///
+/// @author Mark Erikson @date 04-22-2004
+//////////////////////////////////////////////////////////////////////////////
+void wxTerm::OnSize(wxSizeEvent &event)
+{
+ UpdateSize();
+}
+
+void wxTerm::UpdateRemoteSize(int width, int height)
+{
+
+}
--- /dev/null
+/*
+ taTelnet - A cross-platform telnet program.
+ Copyright (c) 2000 Derry Bryson
+ 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+
+#ifndef INCLUDE_WXTERM
+#define INCLUDE_WXTERM
+
+#ifdef __GNUG__
+#pragma interface
+#endif
+
+#include "../GTerm/gterm.hpp"
+#include <wx/dcmemory.h>
+#include <wx/timer.h>
+#include <wx/colour.h>
+#include <wx/event.h>
+#include <wx/font.h>
+#include <wx/gdicmn.h>
+#include <wx/string.h>
+#include <wx/window.h>
+
+#define wxEVT_COMMAND_TERM_RESIZE wxEVT_USER_FIRST + 1000
+#define wxEVT_COMMAND_TERM_NEXT wxEVT_USER_FIRST + 1001
+
+#define EVT_TERM_RESIZE(id, fn) { wxEVT_COMMAND_TERM_RESIZE, id, -1, (wxObjectEventFunction) (wxEventFunction) (wxCommandEventFunction) &fn, (wxObject *)NULL },
+
+class wxTerm : public wxWindow, public GTerm
+{
+ int
+ m_charWidth,
+ m_charHeight,
+ m_init,
+ m_width,
+ m_height,
+ m_selx1,
+ m_sely1,
+ m_selx2,
+ m_sely2,
+ m_curX,
+ m_curY,
+ m_curFG,
+ m_curBG,
+ m_curFlags,
+ m_curState,
+ m_curBlinkRate;
+
+ int m_charsInLine;
+ int m_linesDisplayed;
+
+ unsigned char
+ m_curChar;
+
+ bool
+ m_selecting,
+ m_marking;
+
+ bool m_inUpdateSize;
+
+ wxColour
+ m_vt_colors[16],
+ m_pc_colors[16],
+ *m_colors;
+
+ wxPen
+ m_vt_colorPens[16],
+ m_pc_colorPens[16],
+ *m_colorPens;
+
+ wxFont
+ m_normalFont,
+ m_underlinedFont,
+ m_boldFont,
+ m_boldUnderlinedFont;
+
+ wxDC
+ *m_curDC;
+
+ wxMemoryDC
+ m_memDC;
+
+ wxBitmap
+ *m_bitmap;
+
+ FILE
+ *m_printerFN;
+
+ char
+ *m_printerName;
+
+ wxTimer
+ m_timer;
+
+public:
+ enum BOLDSTYLE
+ {
+ DEFAULT = -1,
+ COLOR = 0,
+ OVERSTRIKE = 1,
+ FONT = 2
+ };
+
+private:
+ BOLDSTYLE
+ m_boldStyle;
+
+ typedef struct
+ {
+ wxKeyCode
+ keyCode;
+
+ int
+ VTKeyCode;
+ } TermKeyMap;
+
+ static TermKeyMap keyMapTable[];
+
+public:
+ wxTerm(wxWindow* parent, wxWindowID id,
+ const wxPoint& pos = wxDefaultPosition,
+ int width = 80, int height = 24,
+ const wxString& name = "wxTerm");
+
+ virtual ~wxTerm();
+
+ bool SetFont(const wxFont& font);
+
+ void GetDefVTColors(wxColor colors[16], wxTerm::BOLDSTYLE boldStyle = wxTerm::DEFAULT);
+ void GetVTColors(wxColour colors[16]);
+ void SetVTColors(wxColour colors[16]);
+ void GetDefPCColors(wxColour colors[16]);
+ void GetPCColors(wxColour colors[16]);
+ void SetPCColors(wxColour colors[16]);
+ int GetCursorBlinkRate() { return m_curBlinkRate; }
+ void SetCursorBlinkRate(int rate);
+
+ void SetBoldStyle(wxTerm::BOLDSTYLE boldStyle);
+ wxTerm::BOLDSTYLE GetBoldStyle(void) { return m_boldStyle; }
+
+ void ScrollTerminal(int numLines, bool scrollUp = true);
+
+ void ClearSelection();
+ bool HasSelection();
+ wxString GetSelection();
+ void SelectAll();
+
+ void UpdateSize();
+ //void UpdateSize(int &termheight, int &linesReceived);
+ //void UpdateSize(wxSizeEvent &event);
+
+ /*
+ ** GTerm stuff
+ */
+ virtual void DrawText(int fg_color, int bg_color, int flags,
+ int x, int y, int len, unsigned char *string);
+ virtual void DrawCursor(int fg_color, int bg_color, int flags,
+ int x, int y, unsigned char c);
+
+ virtual void MoveChars(int sx, int sy, int dx, int dy, int w, int h);
+ virtual void ClearChars(int bg_color, int x, int y, int w, int h);
+// virtual void SendBack(int len, char *data);
+ virtual void ModeChange(int state);
+ virtual void Bell();
+ virtual void ResizeTerminal(int w, int h);
+ virtual void RequestSizeChange(int w, int h);
+
+ virtual void ProcessInput(int len, unsigned char *data);
+// virtual void ProcessOutput(int len, unsigned char *data);
+
+ virtual void SelectPrinter(char *PrinterName);
+ virtual void PrintChars(int len, unsigned char *data);
+
+ virtual void UpdateRemoteSize(int width, int height);
+ int GetTermWidth(){return m_charsInLine;}
+ int GetTermHeight(){return m_linesDisplayed;}
+
+private:
+ int MapKeyCode(int keyCode);
+ void MarkSelection();
+ void DoDrawCursor(int fg_color, int bg_color, int flags,
+ int x, int y, unsigned char c);
+
+ void OnChar(wxKeyEvent& event);
+ void OnKeyDown(wxKeyEvent& event);
+ void OnPaint(wxPaintEvent& event);
+ void OnLeftDown(wxMouseEvent& event);
+ void OnLeftUp(wxMouseEvent& event);
+ void OnMouseMove(wxMouseEvent& event);
+ void OnTimer(wxTimerEvent& event);
+ void OnSize(wxSizeEvent &event);
+
+ void OnGainFocus(wxFocusEvent &event);
+ void OnLoseFocus(wxFocusEvent &event);
+
+ //private wxScrollBar* m_scrollbar;
+
+ DECLARE_EVENT_TABLE()
+};
+
+#endif /* INCLUDE_WXTERM */
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#include "terminalinputevent.h"
+
+
+DEFINE_EVENT_TYPE(chEVT_TERMINAL_INPUT)
+
+TerminalInputEvent::TerminalInputEvent(wxString str)
+ : wxEvent(0, chEVT_TERMINAL_INPUT),m_string(str)
+{
+ //
+}
+
+TerminalInputEvent::TerminalInputEvent(const TerminalInputEvent& otherEvent)
+: wxEvent(otherEvent)
+{
+ this->SetString(otherEvent.GetString());
+}
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2004 Mark Erikson
+ 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+#ifndef __TERMINAL_INPUT_EVENT__H__
+#define __TERMINAL_INPUT_EVENT__H__
+
+#include <wx/process.h>
+#include <wx/event.h>
+
+// -------------------------------------------------------------------
+// ProcessEvent
+// -------------------------------------------------------------------
+DECLARE_EVENT_TYPE(chEVT_TERMINAL_INPUT, wxID_ANY)
+
+
+class TerminalInputEvent : public wxEvent
+{
+ public:
+ TerminalInputEvent(wxString str);
+ TerminalInputEvent(const TerminalInputEvent& event);
+
+ void SetString(wxString s) { m_string = s; }
+
+ wxString GetString() const { return m_string; }
+
+ virtual wxEvent *Clone() const { return new TerminalInputEvent(*this); }
+
+ private:
+ wxString m_string;
+
+};
+
+typedef void (wxEvtHandler::*TerminalInputEventFunction)(TerminalInputEvent&);
+
+
+#define EVT_TERMINAL_INPUT(fn) \
+ DECLARE_EVENT_TABLE_ENTRY( \
+ chEVT_TERMINAL_INPUT, wxID_ANY, wxID_ANY, \
+ (wxObjectEventFunction)(wxEventFunction)(TerminalInputEventFunction)&fn, \
+ (wxObject *) NULL),
+
+
+#endif // __TERMINAL_INPUT_EVENT__H__
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#include "terminalwx.h"
+
+#include <wx/log.h>
+/**
+ Constructor for the terminal widget.
+
+ @param width The width of the terminal in characters
+ @param height The height of the terminal in character
+
+ @param name
+ The terminal name, which is not displayed but stored
+ internally, and might be changed by VT commands.
+
+*/
+TerminalWx::TerminalWx(wxWindow* parent, wxWindowID id,
+ const wxPoint& pos,
+ int width, int height,
+ const wxString& name): wxTerm(parent,id,pos,width,height,name)
+{
+ //ctor
+}
+/**
+ Called whenever the user has input additional text.
+ By default it does nothing.
+*/
+void TerminalWx::OnUserInput(wxString input) {
+ wxLogDebug("GotInput! %s",input);
+ //By default do nothing.
+}
+
+void TerminalWx::SendBack(int len,char* data) {
+ OnUserInput(wxString(data,len));
+}
+void TerminalWx::SendBack(char* data) {
+ OnUserInput(wxString(data));
+}
+/**
+ * Processes characters sent from the backend.
+ *
+ * This function is thread safe and can be called from any thread at any time.
+ *
+*/
+void TerminalWx::DisplayChars(const wxString& str) {
+ this->QueueEvent(new TerminalInputEvent(str));
+}
+
+/**
+ * Processes characters sent from the backend
+ *
+ * This function is not thread safe and can *only*
+ * safely be called from the main event loop
+*/
+void TerminalWx::DisplayCharsUnsafe(const wxString& str) {
+ ProcessInput(str.length(),(unsigned char*)const_cast<char*>((const char*)str.mb_str()));
+}
+
+void TerminalWx::OnTerminalInput(TerminalInputEvent& evt) {
+ DisplayCharsUnsafe(evt.GetString());
+}
+
+TerminalWx::~TerminalWx()
+{
+ //dtor
+}
+
+
+wxBEGIN_EVENT_TABLE(TerminalWx, wxTerm)
+
+EVT_TERMINAL_INPUT(TerminalWx::OnTerminalInput)
+
+wxEND_EVENT_TABLE()
--- /dev/null
+/*
+TerminalWx - A wxWidgets terminal widget
+Copyright (C) 2012-2013 Jeremy Salwen
+
+License: wxWindows License Version 3.1 (See the file license3.txt)
+
+*/
+
+#ifndef TERMINALWX_H
+#define TERMINALWX_H
+
+#include "taTelnet/wxterm.h"
+#include "terminalinputevent.h"
+
+/*! \mainpage TerminalWx
+ *
+ * \section intro_sec Introduction
+ *
+ * TerminalWx is a fully VT100 compatible virtual terminal widget for wxWindows
+ *
+ * The code is almost entirely from the Chameleon IDE by Mark Erikson,
+ * taTelnet by Derry Bryson, and GTerm by Timothy Miller.
+ *
+ * \section install_sec Use
+ *
+ * The public API for TerminalWx is the class TerminalWx.
+ * It is a wxWindow. Simply add it to your gui as you would any other widget.
+ *
+ *
+ */
+
+
+/**
+ * Terminal Widget
+ *
+ * To handle user input to the terminal, inherit this
+ * class and override the OnUserInput
+ *
+ * To make the widget display new characters sent from your backend,
+ * use DisplayChars (or you may use DisplayCharsUnsafe, if you are
+ * calling from within the main event loop.
+ */
+class TerminalWx : public wxTerm
+{
+public:
+ TerminalWx(wxWindow* parent, wxWindowID id,
+ const wxPoint& pos = wxDefaultPosition,
+ int width = 80, int height = 24,
+ const wxString& name = "TerminalWx");
+ virtual ~TerminalWx();
+ virtual void OnUserInput(wxString);
+ virtual void DisplayChars(const wxString& text);
+ virtual void DisplayCharsUnsafe(const wxString& text);
+protected:
+private:
+ void OnTerminalInput(TerminalInputEvent&);
+ virtual void SendBack(int len, char* data);
+ virtual void SendBack(char* data);
+ DECLARE_EVENT_TABLE()
+};
+
+#endif // TERMINALWX_H
--- /dev/null
+<?xml version="1.0" encoding="utf-8" ?>
+<wxsmith>
+ <object class="wxFrame" name="TerminalWxFrame">
+ <title>Test TerminalWx App</title>
+ <handler function="OnClose" entry="EVT_CLOSE" />
+ <object class="Custom" name="ID_TERM" subclass="TerminalWx" variable="Term1" member="yes">
+ <creating_code>$(THIS) = new $(CLASS)($(PARENT),$(ID),$(POS),80,24,$(NAME));</creating_code>
+ <style></style>
+ <pos>72,56</pos>
+ </object>
+ <object class="wxMenuBar" variable="MenuBar1" member="no">
+ <object class="wxMenu" variable="Menu1" member="no">
+ <label>&File</label>
+ <object class="wxMenuItem" name="idMenuQuit" variable="MenuItem1" member="no">
+ <label>Quit</label>
+ <accel>Alt-F4</accel>
+ <help>Quit the application</help>
+ <handler function="OnQuit" entry="EVT_MENU" />
+ </object>
+ </object>
+ <object class="wxMenu" variable="Menu2" member="no">
+ <label>Help</label>
+ <object class="wxMenuItem" name="idMenuAbout" variable="MenuItem2" member="no">
+ <label>About</label>
+ <accel>F1</accel>
+ <help>Show info about this application</help>
+ <handler function="OnAbout" entry="EVT_MENU" />
+ </object>
+ </object>
+ </object>
+ <object class="wxStatusBar" name="ID_STATUSBAR1" variable="StatusBar1" member="yes">
+ <fields>1</fields>
+ <widths>-1</widths>
+ <styles>wxSB_NORMAL</styles>
+ </object>
+ </object>
+</wxsmith>
--- /dev/null
+Makefile
+*/Makefile
+autom4te.cache/
+config.h
+configure
+m4/
+src/.deps/
+src/dfu-suffix
+src/dfu-prefix
+src/dfu-util
+src/dfu-version.h
+stamp-h1
+Win32/
+msvc/ipch/
+*.log
+*.status
+*.m4
+*.o
+*.in
+*.suo
+*.user
+*.opensdf
+*.sdf
+*~
--- /dev/null
+Authors ordered by first contribution.
+
+Harald Welte
+Werner Almesberger
+Michael Lauer
+Jim Huang
+Stefan Schmidt
+Daniel Willmann
+Mike Frysinger
+Uwe Hermann
+C. Scott Ananian
+Bernard Blackham
+Holger Freyther
+Marc Singer
+James Perkins
+Tommi Keisala
+Pascal Schweizer
+Bradley Scott
+Uwe Bonnes
+Andrey Smirnov
+Jussi Timperi
+Hans Petter Selasky
+Bo Shen
+Henrique de Almeida Mendonca
+Bernd Krumboeck
+Dennis Meier
+Veli-Pekka Peltola
+Dave Hylands
+Michael Grzeschik
+Paul Fertser
+Dirk Castelijns
+Gordon McNab
+Stefan Zehl
+Timo Poikola
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- /dev/null
+0.9:
+ o Reimplemented USBPATH support (Stefan Zehl)
+ o Better parsing of numeric arguments (Timo Poikola)
+ o Avoid conflict with HID devices (Gordon McNab)
+ o Mass erase timeout workaround for STM32F405 (Tormod Volden)
+ o Workaround for LPC DFU bootloader (Dirk Castelijns)
+ o Include example udev rules file (Tormod Volden)
+
+2016-02-08: Tormod Volden <debian.tormod@gmail.com>
+
+0.8:
+ o New, separate dfu-prefix tool (Uwe Bonnes)
+ o Allow filtering on serial number (Uwe Bonnes)
+ o Improved VID/PID/serial filtering (Bradley Scott)
+ o Support reading firmware from stdin (Tormod Volden)
+ o Warn if missing DFU suffix (Tormod Volden)
+ o Improved progress bar (Hans Petter Selasky)
+ o Fix dfuse leave option (Uwe Bonnes)
+ o Major code rework (Hans Petter Selasky)
+ o MS Visual Studio build support (Henrique Mendonca)
+ o dfuse-pack.py tool for .dfu files (Antonio Galeo)
+ o Many other fixes from many people
+
+2014-09-13: Tormod Volden <debian.tormod@gmail.com>
+
+0.7:
+ o Support for TI Stellaris devices (Tommi Keisala)
+ o Fix libusb detection on MacOSX (Marc Singer)
+ o Fix libusb detection on FreeBSD (Tormod Volden)
+ o Improved DfuSe support (Tormod Volden)
+ o Support all special commands (leave, unprotect, mass-erase)
+ o Arbitrary upload lengths
+ o "force" option for various possible (dangerous) overrides
+
+2012-10-07: Tormod Volden <debian.tormod@gmail.com>
+
+0.6:
+ o Add detach mode (Stefan Schmidt)
+ o Check return value on all libusb calls (Tormod Volden)
+ o Fix segmentation fault with -s option (Tormod Volden)
+ o Add DFU suffix manipulation tool (Stefan Schmidt)
+ o Port to Windows: (Tormod Volden, some parts based on work from Satz
+ Klauer)
+ o Port file handling to stdio streams
+ o Sleep() macros
+ o C99 types
+ o Pack structs
+ o Detect DfuSe device correctly on big-endian architectures (Tormod
+ Volden)
+ o Add dfuse progress indication on download (Tormod Volden)
+ o Cleanup: gcc pedantic, gcc extension, ... (Tormod Volden)
+ o Rely on page size from functional descriptor. Please report if you get
+ an error about it. (Tormod Volden)
+ o Add quirk for Maple since it reports wrong DFU version (Tormod Volden)
+
+2012-04-22: Stefan Schmidt <stefan@datenfreihafen.org>
+
+0.5:
+ o DfuSe extension support for ST devices (Tormod Volden)
+ o Add initial support for bitWillDetach flag from DFU 1.1 (Tormod
+ Volden)
+ o Internal cleanup and some manual page fixes (Tormod Volden)
+
+2011-11-02: Stefan Schmidt <stefan@datenfreihafen.org>
+
+0.4:
+ o Rework to use libusb-1.0 (Stefan Schmidt)
+ o DFU suffix support (Tormod Volden, Stefan Schmidt)
+ o Sspeed up DFU downloads directly into memory (Bernard Blackham)
+ o More flexible -d vid:pid parsing (Tormod Volden)
+ o Many bug fixes and cleanups
+
+2011-07-20: Stefan Schmidt <stefan@datenfreihafen.org>
+
+0.3:
+ o quirks: Add OpenOCD to the poll timeout quirk table.
+
+2010-12-22: Stefan Schmidt <stefan@datenfreihafen.org>
+
+0.2:
+ o Fix some typos on the website and the README (Antonio Ospite, Uwe
+ Hermann)
+ o Remove build rule for a static binary. We can use autotools for this.
+ (Mike Frysinger)
+ o Fix infinite loop in download error path (C. Scott Ananian)
+ o Break out to show the 'finished' in upload (C. Scott Ananian)
+ o Add GPLv2+ headers (Harald Welte)
+ o Remove dead code (commands.[ch]) remnescent of dfu-programmer (Harald
+ Welte)
+ o Simple quirk system with Openmoko quirk for missing bwPollTimeout (Tormod Volden)
+ o New default (1024) and clamping of transfer size (Tormod Volden)
+ o Verify sending of completion packet (Tormod Volden)
+ o Look for DFU functional descriptor among all descriptors (Tormod
+ Volden)
+ o Print out in which direction we are transferring data
+ o Abort in upload if the file already exists
+
+2010-11-17 Stefan Schmidt <stefan@datenfreihafen.org>
+
+0.1:
+ Initial release
+
+2010-05-23 Stefan Schmidt <stefan@datenfreihafen.org>
--- /dev/null
+List of supported software and hardware products:
+
+Software user (bootloader, etc)
+-------------------------------
+- Sam7DFU: http://www.openpcd.org/Sam7dfu
+- U-boot: DFU patches
+- Barebox: http://www.barebox.org/
+- Leaflabs: http://code.google.com/p/leaflabs/
+- Blackmagic DFU
+
+Products using DFU
+------------------
+- OpenPCD (sam7dfu)
+- Openmoko Neo 1973 and Freerunner (u-boot with DFU patches)
+- Leaflabs Maple
+- ATUSB from Qi Hardware
+- STM32F105/7, STM32F2/F3/F4 in System Bootloader
+- Blackmagic debug probe
+- NXP LPC31xx/LPC43XX, e.g. LPC-Link and LPC-Link2, need binaries
+ with LPC prefix and encoding (LPC-Link)
--- /dev/null
+
+1. If building from git (not needed for release tarballs):
+ Generate build system files (requires autoconf from autotools)
+
+ ./autogen.sh
+
+2. Generate makefiles
+ (Run ./configure --help to see configuration options)
+
+ ./configure
+
+3. Build executables
+
+ make
+
+4. Install executables and manual pages (optional)
+
+ make install
+
--- /dev/null
+SUBDIRS = src doc
+
+EXTRA_DIST = autogen.sh TODO DEVICES.txt dfuse-pack.py
--- /dev/null
+Dfu-util - Device Firmware Upgrade Utilities
+
+Dfu-util is the host side implementation of the DFU 1.0 [1] and DFU 1.1 [2]
+specification of the USB forum.
+
+DFU is intended to download and upload firmware to devices connected over
+USB. It ranges from small devices like micro-controller boards up to mobile
+phones. With dfu-util you are able to download firmware to your device or
+upload firmware from it.
+
+dfu-util has been tested with Openmoko Neo1973 and Freerunner and many
+other devices.
+
+[1] DFU 1.0 spec: http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+[2] DFU 1.1 spec: http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
+
+The official website is:
+
+ http://dfu-util.sourceforge.net
+
+See the INSTALL file for build instructions.
--- /dev/null
+DfuSe:
+- Skip "Set Address" command when downloading contiguous blocks
+- Implement "Get Commands" command
+
+Devices:
+- Research iPhone/iPod/iPad support
+ Heavily modified dfu-util fork here:
+ https://github.com/planetbeing/xpwn/tree/master/dfu-util
+- Test against Niftylights
+
+Non-Code:
+- Logo
+- Re-License as LGPL for usage as library?
--- /dev/null
+#! /bin/sh
+autoreconf -v -i
--- /dev/null
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([dfu-util],[0.9],[http://sourceforge.net/p/dfu-util/tickets/],,[http://dfu-util.sourceforge.net])
+AC_CONFIG_AUX_DIR(m4)
+AM_INIT_AUTOMAKE([foreign])
+AC_CONFIG_HEADERS([config.h])
+
+# Test for new silent rules and enable only if they are available
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
+# Checks for programs.
+AC_PROG_CC
+
+# Checks for libraries.
+# On FreeBSD the libusb-1.0 is called libusb and resides in system location
+AC_CHECK_LIB([usb], [libusb_init],, [native_libusb=no],)
+AS_IF([test x$native_libusb = xno], [
+ PKG_CHECK_MODULES([USB], [libusb-1.0 >= 1.0.0],,
+ AC_MSG_ERROR([*** Required libusb-1.0 >= 1.0.0 not installed ***]))
+])
+
+LIBS="$LIBS $USB_LIBS"
+CFLAGS="$CFLAGS $USB_CFLAGS"
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([windows.h sysexits.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_SIZE_T
+
+# Checks for library functions.
+AC_FUNC_MEMCMP
+AC_CHECK_FUNCS([getpagesize nanosleep err])
+
+AC_CONFIG_FILES(Makefile src/Makefile doc/Makefile)
+AC_OUTPUT
--- /dev/null
+Device:
+-------
+qi-hardware-atusb:
+- Qi Hardware ben-wpan
+- DFU implementation:
+ http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/atusb/fw/usb
+- Tester: Stefan Schmidt
+
+openpcd:
+- OpenPCD RFID reader
+- DFU implementation: SAM7DFU
+ http://www.openpcd.org/Sam7dfu, git://git.gnumonks.org/openpcd.git
+- Tester: Stefan Schmidt
+
+simtrace:
+- Sysmocom SimTrace
+- DFU implementation: SAM7DFU
+ http://www.openpcd.org/Sam7dfu, git://git.gnumonks.org/openpcd.git
+- Tester: Stefan Schmidt
+
+openmoko-freerunner:
+- Openmoko Freerunner
+- DFU implementation: Old U-Boot
+ http://git.openmoko.org/?p=u-boot.git;a=shortlog;h=refs/heads/mokopatches
+- Tester: Stefan Schmidt
+
+openmoko-neo1973:
+- Openmoko Neo1073
+- DFU implementation: Old U-Boot
+ http://git.openmoko.org/?p=u-boot.git;a=shortlog;h=refs/heads/mokopatches
+- Tester: Stefan Schmidt
+
+tdk-bluetooth:
+- TDK Corp. Bluetooth Adapter
+- DFU implementation: closed soure
+- Only upload has been tested
+- Tester: Stefan Schmidt
+
+stm32f107:
+- STM32 microcontrollers with built-in (ROM) DFU loader
+- DFU implementation: Closed source but probably similar to the one
+ in their USB device libraries. Some relevant application notes:
+ http://www.st.com -> AN3156 and AN2606
+- Tested by Uwe Bonnes
+
+stm32f4discovery:
+- STM32 microcontroller board with built-in (ROM) DFU loader
+- DFU implementation: Closed source, probably similar to stm32f107.
+- Tested by Joe Rothweiler
+
+dso-nano:
+- DSO Nano pocket oscilloscope
+- DFU implementation: Based on ST Microelectronics USB FS Library 1.0
+ http://dsonano.googlecode.com/files/DS0201_OpenSource.rar
+- Tester: Tormod Volden
+
+opc-20:
+- Custom devices based on STM32F1xx
+- DFU implementation: ST Microelectronics USB FS Device Library 3.1.0
+ http://www.st.com -> um0424.zip
+- Tester: Tormod Volden
+
+lpc-link, lpclink2:
+- NXP LPCXpresso debug adapters
+- Proprietary DFU implementation, uses special download files with
+ LPC prefix and encoding of the target firmware code
+- Tested by Uwe Bonnes
+
+Adding the lsusb output and a download log of your device here helps
+us to avoid regressions for hardware we cannot test while working on
+the code. To extract the lsusb output use this command:
+sudo lsusb -v -d $USBID > $DEVICE.lsusb
+Prepare a description snippet as above, and send it to us. A log
+(copy-paste of the command window) of a firmware download is also
+nice, please use the double verbose option -v -v and include the
+command line in the log file.
+
--- /dev/null
+
+Bus 002 Device 004: ID 0483:df11 SGS Thomson Microelectronics
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0483 SGS Thomson Microelectronics
+ idProduct 0xdf11
+ bcdDevice 1.1a
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STM32 DFU
+ iSerial 3 001
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 36
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 64mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 0
+ iInterface 4 @Internal Flash /0x08000000/12*001Ka,116*001Kg
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 0
+ iInterface 5 @SPI Flash : M25P64/0x00000000/64*064Kg,64*064Kg
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 11
+ Will Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 255 milliseconds
+ wTransferSize 1024 bytes
+ bcdDFUVersion 1.1a
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+
+Bus 003 Device 008: ID 0471:df55 Philips (or NXP) LPCXpresso LPC-Link
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0471 Philips (or NXP)
+ idProduct 0xdf55 LPCXpresso LPC-Link
+ bcdDevice 0.01
+ iManufacturer 0
+ iProduct 0
+ iSerial 0
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 25
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 0
+ iInterface 0
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 7
+ bDescriptorType 33
+ bmAttributes 1
+ Will Not Detach
+ Manifestation Intolerant
+ Upload Unsupported
+ Download Supported
+ wDetachTimeout 65535 milliseconds
+ wTransferSize 2048 bytes
+Device Qualifier (for other device speed):
+ bLength 10
+ bDescriptorType 6
+ bcdUSB 2.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ bNumConfigurations 1
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+
+Bus 003 Device 007: ID 0c72:000c PEAK System PCAN-USB
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 16
+ idVendor 0x0c72 PEAK System
+ idProduct 0x000c PCAN-USB
+ bcdDevice 1c.ff
+ iManufacturer 0
+ iProduct 3 VER1:PEAK
+VER2:02.8.01
+DAT :06.05.2004
+TIME:09:35:37
+ ...
+ iSerial 0
+ bNumConfigurations 3
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 46
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 200mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 4
+ bInterfaceClass 0 (Defined at Interface level)
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 20
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 20
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 46
+ bNumInterfaces 1
+ bConfigurationValue 2
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 394mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 4
+ bInterfaceClass 0 (Defined at Interface level)
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 20
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 20
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 46
+ bNumInterfaces 1
+ bConfigurationValue 3
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 200mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 4
+ bInterfaceClass 0 (Defined at Interface level)
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x01 EP 1 OUT
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+Device Status: 0x0001
+ Self Powered
--- /dev/null
+
+Bus 001 Device 004: ID 0483:df11 SGS Thomson Microelectronics
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0483 SGS Thomson Microelectronics
+ idProduct 0xdf11
+ bcdDevice 2.00
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STM32 DFU
+ iSerial 3 ÿÿÿÿÿÿÿÿÿÿÿÿ
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 36
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0xc0
+ Self Powered
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 4 @Internal Flash /0x08000000/12*001Ka,116*001Kg
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 5 @SPI Flash : M25P64/0x00000000/128*64Kg
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 11
+ Will Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 255 milliseconds
+ wTransferSize 1024 bytes
+ bcdDFUVersion 1a.01
+Device Status: 0x0001
+ Self Powered
--- /dev/null
+Bus 003 Device 017: ID 1d50:5119 OpenMoko, Inc. GTA01/GTA02 U-Boot Bootloader
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 16
+ idVendor 0x1d50 OpenMoko, Inc.
+ idProduct 0x5119 GTA01/GTA02 U-Boot Bootloader
+ bcdDevice 0.00
+ iManufacturer 1 OpenMoko, Inc
+ iProduct 2 Neo1973 Bootloader U-Boot 1.3.2-moko12
+ iSerial 3 0000000
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 81
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 7 USB Device Firmware Upgrade
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 8 RAM 0x32000000
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 9 u-boot
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 2
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 10 u-boot_env
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 3
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 11 kernel
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 4
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 12 splash
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 5
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 13 factory
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 6
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 14 rootfs
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 7
+ Will Not Detach
+ Manifestation Tolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 65280 milliseconds
+ wTransferSize 4096 bytes
+ bcdDFUVersion 1.00
+Device Status: 0x0a00
+ (Bus Powered)
--- /dev/null
+Bus 005 Device 033: ID 1d50:5119 OpenMoko, Inc. GTA01/GTA02 U-Boot Bootloader
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.10
+ bDeviceClass 2 Communications
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 16
+ idVendor 0x1d50 OpenMoko, Inc.
+ idProduct 0x5119 GTA01/GTA02 U-Boot Bootloader
+ bcdDevice 0.00
+ iManufacturer 1 OpenMoko, Inc
+ iProduct 2 Neo1973 Bootloader U-Boot 1.3.2-moko12
+ iSerial 3 0000000
+ bNumConfigurations 2
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 85
+ bNumInterfaces 3
+ bConfigurationValue 1
+ iConfiguration 4 TTY via USB
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 500mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 6 Control Interface
+ CDC Header:
+ bcdCDC 0.6e
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 1
+ CDC ACM:
+ bmCapabilities 0x00
+ CDC Union:
+ bMasterInterface 0
+ bSlaveInterface 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0 Unused
+ bInterfaceProtocol 0
+ iInterface 5 Bulk Data Interface
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 2
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 1
+ iInterface 7 USB Device Firmware Upgrade
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 7
+ Will Not Detach
+ Manifestation Tolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 65280 milliseconds
+ wTransferSize 4096 bytes
+ bcdDFUVersion 1.00
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 67
+ bNumInterfaces 2
+ bConfigurationValue 2
+ iConfiguration 4 TTY via USB
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 6 Control Interface
+ CDC Header:
+ bcdCDC 0.6e
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 1
+ CDC ACM:
+ bmCapabilities 0x00
+ CDC Union:
+ bMasterInterface 0
+ bSlaveInterface 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0 Unused
+ bInterfaceProtocol 0
+ iInterface 5 Bulk Data Interface
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+Device Status: 0x9a00
+ (Bus Powered)
--- /dev/null
+
+Bus 006 Device 020: ID 1457:5119 First International Computer, Inc. OpenMoko Neo1973 u-boot cdc_acm serial port
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.10
+ bDeviceClass 2 Communications
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 16
+ idVendor 0x1457 First International Computer, Inc.
+ idProduct 0x5119 OpenMoko Neo1973 u-boot cdc_acm serial port
+ bcdDevice 0.00
+ iManufacturer 1
+ iProduct 2
+ iSerial 3
+ bNumConfigurations 2
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 85
+ bNumInterfaces 3
+ bConfigurationValue 1
+ iConfiguration 4
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 500mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 6
+ CDC Header:
+ bcdCDC 0.6e
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 1
+ CDC ACM:
+ bmCapabilities 0x00
+ CDC Union:
+ bMasterInterface 0
+ bSlaveInterface 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0 Unused
+ bInterfaceProtocol 0
+ iInterface 5
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 2
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 1
+ iInterface 7
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 7
+ Will Not Detach
+ Manifestation Tolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 65280 milliseconds
+ wTransferSize 4096 bytes
+ bcdDFUVersion 1.00
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 67
+ bNumInterfaces 2
+ bConfigurationValue 2
+ iConfiguration 4
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 2 Communications
+ bInterfaceSubClass 2 Abstract (modem)
+ bInterfaceProtocol 1 AT-commands (v.25ter)
+ iInterface 6
+ CDC Header:
+ bcdCDC 0.6e
+ CDC Call Management:
+ bmCapabilities 0x00
+ bDataInterface 1
+ CDC ACM:
+ bmCapabilities 0x00
+ CDC Union:
+ bMasterInterface 0
+ bSlaveInterface 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 10 CDC Data
+ bInterfaceSubClass 0 Unused
+ bInterfaceProtocol 0
+ iInterface 5
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 255
+Device Status: 0x0006
+ (Bus Powered)
+ Remote Wakeup Enabled
+ Test Mode
--- /dev/null
+
+Bus 006 Device 016: ID 16c0:076b VOTI OpenPCD 13.56MHz RFID Reader
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 8
+ idVendor 0x16c0 VOTI
+ idProduct 0x076b OpenPCD 13.56MHz RFID Reader
+ bcdDevice 0.00
+ iManufacturer 1
+ iProduct 2 OpenPCD RFID Simulator - DFU Mode
+ iSerial 0
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 36
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 200mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 0
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 0
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 3
+ Will Not Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 65280 milliseconds
+ wTransferSize 256 bytes
+ bcdDFUVersion 1.00
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+
+Bus 006 Device 013: ID 20b7:1540 Qi Hardware ben-wpan, AT86RF230-based
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 255 Vendor Specific Class
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x20b7 Qi Hardware
+ idProduct 0x1540 ben-wpan, AT86RF230-based
+ bcdDevice 0.01
+ iManufacturer 0
+ iProduct 0
+ iSerial 1 4630333438371508231a
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 34
+ bNumInterfaces 2
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 40mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 1
+ bInterfaceClass 255 Vendor Specific Class
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 0
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 1
+ iInterface 0
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+
+Bus 006 Device 017: ID 16c0:0762 VOTI
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 8
+ idVendor 0x16c0 VOTI
+ idProduct 0x0762
+ bcdDevice 0.00
+ iManufacturer 1 sysmocom - systems for mobile communications GmbH
+ iProduct 2 SimTrace SIM Sniffer - DFU Mode
+ iSerial 0
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 45
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 3 SimTrace DFU Configuration
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 200mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 4 SimTrace DFU Interface - Application Partition
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 5 SimTrace DFU Interface - Bootloader Partition
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 2
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 6 SimTrace DFU Interface - RAM
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 3
+ Will Not Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 65280 milliseconds
+ wTransferSize 256 bytes
+ bcdDFUVersion 1.00
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+
+Bus 001 Device 008: ID 1d50:607f OpenMoko, Inc.
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x1d50 OpenMoko, Inc.
+ idProduct 0x607f
+ bcdDevice 2.00
+ iManufacturer 1 Spark Devices
+ iProduct 2 CORE DFU
+ iSerial 3 8D80527B5055
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 36
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0xc0
+ Self Powered
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 4 @Internal Flash /0x08000000/20*001Ka,108*001Kg
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 5 @SPI Flash : SST25x/0x00000000/512*04Kg
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 11
+ Will Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 255 milliseconds
+ wTransferSize 1024 bytes
+ bcdDFUVersion 1.1a
+Device Status: 0x0001
+ Self Powered
--- /dev/null
+> src/dfu-util --intf 0 --alt 0 -v -v -v -s 0x8000000 -D test3
+dfu-util 0.4
+
+(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
+(C) 2010-2011 Tormod Volden (DfuSe support)
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+
+dfu-util does currently only support DFU version 1.0
+
+Opening DFU USB device... ID 0483:df11
+Run-time device DFU version 011a
+Found DFU: [0483:df11] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash /0x08000000/128*002Kg"
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+No valid DFU suffix signature
+Warning: File has no DFU suffix
+DfuSe interface name: "Internal Flash "
+Memory segment at 0x08000000 128 x 2048 = 262144 (rew)
+Uploading to address = 0x08000000, size = 16384
+Erasing page size 2048 at address 0x08000000, page starting at 0x08000000
+ Download from image offset 00000000 to memory 08000000-080007ff, size 2048
+ Setting address pointer to 0x08000000
+Erasing page size 2048 at address 0x08000800, page starting at 0x08000800
+ Download from image offset 00000800 to memory 08000800-08000fff, size 2048
+ Setting address pointer to 0x08000800
+Erasing page size 2048 at address 0x08001000, page starting at 0x08001000
+ Download from image offset 00001000 to memory 08001000-080017ff, size 2048
+ Setting address pointer to 0x08001000
+Erasing page size 2048 at address 0x08001800, page starting at 0x08001800
+ Download from image offset 00001800 to memory 08001800-08001fff, size 2048
+ Setting address pointer to 0x08001800
+Erasing page size 2048 at address 0x08002000, page starting at 0x08002000
+ Download from image offset 00002000 to memory 08002000-080027ff, size 2048
+ Setting address pointer to 0x08002000
+Erasing page size 2048 at address 0x08002800, page starting at 0x08002800
+ Download from image offset 00002800 to memory 08002800-08002fff, size 2048
+ Setting address pointer to 0x08002800
+Erasing page size 2048 at address 0x08003000, page starting at 0x08003000
+ Download from image offset 00003000 to memory 08003000-080037ff, size 2048
+ Setting address pointer to 0x08003000
+Erasing page size 2048 at address 0x08003800, page starting at 0x08003800
+ Download from image offset 00003800 to memory 08003800-08003fff, size 2048
+ Setting address pointer to 0x08003800
+
--- /dev/null
+
+Bus 001 Device 028: ID 0483:df11 SGS Thomson Microelectronics STM Device in DFU Mode
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0483 SGS Thomson Microelectronics
+ idProduct 0xdf11 STM Device in DFU Mode
+ bcdDevice 20.00
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STM32 0x418 DFU Bootloader
+ iSerial 3 STM32
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 36
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0xc0
+ Self Powered
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 4 @Internal Flash /0x08000000/128*002Kg
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 5 @Option Bytes /0x1FFFF800/01*016 g
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 11
+ Will Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 255 milliseconds
+ wTransferSize 2048 bytes
+ bcdDFUVersion 1.1a
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+dfu-util --device 0483:df11 --alt 0 \
+ --dfuse-address 0x08000000 \
+ -v -v -v \
+ --download arm/iotoggle.bin
+No valid DFU suffix signature
+Warning: File has no DFU suffix
+dfu-util 0.5
+
+(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
+(C) 2010-2011 Tormod Volden (DfuSe support)
+This program is Free Software and has ABSOLUTELY NO WARRANTY
+
+dfu-util does currently only support DFU version 1.0
+
+Filter on vendor = 0x0483 product = 0xdf11
+Opening DFU capable USB device... ID 0483:df11
+Run-time device DFU version 011a
+Found DFU: [0483:df11] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash /0x08000000/04*016Kg,01*064Kg,07*128Kg"
+Claiming USB DFU Interface...
+Setting Alternate Setting #0 ...
+Determining device status: state = dfuERROR, status = 10
+dfuERROR, clearing status
+Determining device status: state = dfuIDLE, status = 0
+dfuIDLE, continuing
+DFU mode device DFU version 011a
+Device returned transfer size 2048
+DfuSe interface name: "Internal Flash "
+Memory segment at 0x08000000 4 x 16384 = 65536 (rew)
+Memory segment at 0x08010000 1 x 65536 = 65536 (rew)
+Memory segment at 0x08020000 7 x 131072 = 917504 (rew)
+Uploading to address = 0x08000000, size = 2308
+Erasing page size 16384 at address 0x08000000, page starting at 0x08000000
+ Download from image offset 00000000 to memory 08000000-080007ff, size 2048
+ Setting address pointer to 0x08000000
+ Download from image offset 00000800 to memory 08000800-08000903, size 260
+ Setting address pointer to 0x08000800
--- /dev/null
+
+Bus 001 Device 010: ID 0483:df11 SGS Thomson Microelectronics STM Device in DFU Mode
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 1.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0483 SGS Thomson Microelectronics
+ idProduct 0xdf11 STM Device in DFU Mode
+ bcdDevice 21.00
+ iManufacturer 1 STMicroelectronics
+ iProduct 2 STM32 BOOTLOADER
+ iSerial 3 315A28A0B956
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 54
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0xc0
+ Self Powered
+ MaxPower 100mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 4 @Internal Flash /0x08000000/04*016Kg,01*064Kg,07*128Kg
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 1
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 5 @Option Bytes /0x1FFFC000/01*016 g
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 2
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 6 @OTP Memory /0x1FFF7800/01*512 g,01*016 g
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 3
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 2
+ iInterface 7 @Device Feature/0xFFFF0000/01*004 g
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 9
+ bDescriptorType 33
+ bmAttributes 11
+ Will Detach
+ Manifestation Intolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 255 milliseconds
+ wTransferSize 2048 bytes
+ bcdDFUVersion 1.1a
+Device Status: 0x0001
+ Self Powered
--- /dev/null
+
+Bus 006 Device 014: ID 04bf:0320 TDK Corp. Bluetooth Adapter
+Device Descriptor:
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 224 Wireless
+ bDeviceSubClass 1 Radio Frequency
+ bDeviceProtocol 1 Bluetooth
+ bMaxPacketSize0 64
+ idVendor 0x04bf TDK Corp.
+ idProduct 0x0320 Bluetooth Adapter
+ bcdDevice 26.52
+ iManufacturer 1 Ezurio
+ iProduct 2 Turbo Bluetooth Adapter
+ iSerial 3 008098D4FFBD
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 193
+ bNumInterfaces 3
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 64mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 3
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0010 1x 16 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x82 EP 2 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0000 1x 0 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0000 1x 0 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 1
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0009 1x 9 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0009 1x 9 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 2
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0011 1x 17 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0011 1x 17 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 3
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0019 1x 25 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0019 1x 25 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 4
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0021 1x 33 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0021 1x 33 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 5
+ bNumEndpoints 2
+ bInterfaceClass 224 Wireless
+ bInterfaceSubClass 1 Radio Frequency
+ bInterfaceProtocol 1 Bluetooth
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x03 EP 3 OUT
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0031 1x 49 bytes
+ bInterval 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 1
+ Transfer Type Isochronous
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0031 1x 49 bytes
+ bInterval 1
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 2
+ bAlternateSetting 0
+ bNumEndpoints 0
+ bInterfaceClass 254 Application Specific Interface
+ bInterfaceSubClass 1 Device Firmware Update
+ bInterfaceProtocol 0
+ iInterface 0
+ Device Firmware Upgrade Interface Descriptor:
+ bLength 7
+ bDescriptorType 33
+ bmAttributes 7
+ Will Not Detach
+ Manifestation Tolerant
+ Upload Supported
+ Download Supported
+ wDetachTimeout 5000 milliseconds
+ wTransferSize 1023 bytes
+Device Status: 0x0000
+ (Bus Powered)
--- /dev/null
+#!/usr/bin/python
+
+# Written by Antonio Galea - 2010/11/18
+# Distributed under Gnu LGPL 3.0
+# see http://www.gnu.org/licenses/lgpl-3.0.txt
+
+import sys,struct,zlib,os
+import binascii
+from optparse import OptionParser
+
+DEFAULT_DEVICE="0x0483:0xdf11"
+DEFAULT_NAME=b'ST...'
+
+def named(tuple,names):
+ return dict(list(zip(names.split(),tuple)))
+def consume(fmt,data,names):
+ n = struct.calcsize(fmt)
+ return named(struct.unpack(fmt,data[:n]),names),data[n:]
+def cstring(bytestring):
+ return bytestring.partition(b'\0')[0]
+def compute_crc(data):
+ return 0xFFFFFFFF & -zlib.crc32(data) -1
+
+def parse(file,dump_images=False):
+ print('File: "%s"' % file)
+ data = open(file,'rb').read()
+ crc = compute_crc(data[:-4])
+ prefix, data = consume('<5sBIB',data,'signature version size targets')
+ print('%(signature)s v%(version)d, image size: %(size)d, targets: %(targets)d' % prefix)
+ for t in range(prefix['targets']):
+ tprefix, data = consume('<6sBI255s2I',data,'signature altsetting named name size elements')
+ tprefix['num'] = t
+ if tprefix['named']:
+ tprefix['name'] = cstring(tprefix['name'])
+ else:
+ tprefix['name'] = ''
+ print('%(signature)s %(num)d, alt setting: %(altsetting)s, name: "%(name)s", size: %(size)d, elements: %(elements)d' % tprefix)
+ tsize = tprefix['size']
+ target, data = data[:tsize], data[tsize:]
+ for e in range(tprefix['elements']):
+ eprefix, target = consume('<2I',target,'address size')
+ eprefix['num'] = e
+ print(' %(num)d, address: 0x%(address)08x, size: %(size)d' % eprefix)
+ esize = eprefix['size']
+ image, target = target[:esize], target[esize:]
+ if dump_images:
+ out = '%s.target%d.image%d.bin' % (file,t,e)
+ open(out,'wb').write(image)
+ print(' DUMPED IMAGE TO "%s"' % out)
+ if len(target):
+ print("target %d: PARSE ERROR" % t)
+ suffix = named(struct.unpack('<4H3sBI',data[:16]),'device product vendor dfu ufd len crc')
+ print('usb: %(vendor)04x:%(product)04x, device: 0x%(device)04x, dfu: 0x%(dfu)04x, %(ufd)s, %(len)d, 0x%(crc)08x' % suffix)
+ if crc != suffix['crc']:
+ print("CRC ERROR: computed crc32 is 0x%08x" % crc)
+ data = data[16:]
+ if data:
+ print("PARSE ERROR")
+
+def checkbin(binfile):
+ data = open(binfile,'rb').read()
+ if (len(data) < 16):
+ return
+ crc = compute_crc(data[:-4])
+ suffix = named(struct.unpack('<4H3sBI',data[-16:]),'device product vendor dfu ufd len crc')
+ if crc == suffix['crc'] and suffix['ufd'] == b'UFD':
+ print('usb: %(vendor)04x:%(product)04x, device: 0x%(device)04x, dfu: 0x%(dfu)04x, %(ufd)s, %(len)d, 0x%(crc)08x' % suffix)
+ print("It looks like the file %s has a DFU suffix!" % binfile)
+ print("Please remove any DFU suffix and retry.")
+ sys.exit(1)
+
+def build(file,targets,name=DEFAULT_NAME,device=DEFAULT_DEVICE):
+ data = b''
+ for t,target in enumerate(targets):
+ tdata = b''
+ for image in target:
+ tdata += struct.pack('<2I',image['address'],len(image['data']))+image['data']
+ tdata = struct.pack('<6sBI255s2I',b'Target',0,1,name,len(tdata),len(target)) + tdata
+ data += tdata
+ data = struct.pack('<5sBIB',b'DfuSe',1,len(data)+11,len(targets)) + data
+ v,d=[int(x,0) & 0xFFFF for x in device.split(':',1)]
+ data += struct.pack('<4H3sB',0,d,v,0x011a,b'UFD',16)
+ crc = compute_crc(data)
+ data += struct.pack('<I',crc)
+ open(file,'wb').write(data)
+
+if __name__=="__main__":
+ usage = """
+%prog [-d|--dump] infile.dfu
+%prog {-b|--build} address:file.bin [-b address:file.bin ...] [{-D|--device}=vendor:device] outfile.dfu
+%prog {-s|--build-s19} file.s19 [{-D|--device}=vendor:device] outfile.dfu"""
+ parser = OptionParser(usage=usage)
+ parser.add_option("-b", "--build", action="append", dest="binfiles",
+ help="build a DFU file from given BINFILES. Note that the BINFILES must not have any DFU suffix!", metavar="BINFILES")
+ parser.add_option("-s", "--build-s19", type="string", dest="s19files",
+ help="build a DFU file from given S19 S-record file.", metavar="S19FILE")
+ parser.add_option("-D", "--device", action="store", dest="device",
+ help="build for DEVICE, defaults to %s" % DEFAULT_DEVICE, metavar="DEVICE")
+ parser.add_option("-d", "--dump", action="store_true", dest="dump_images",
+ default=False, help="dump contained images to current directory")
+ (options, args) = parser.parse_args()
+
+ if options.binfiles and len(args)==1:
+ target = []
+ for arg in options.binfiles:
+ try:
+ address,binfile = arg.split(':',1)
+ except ValueError:
+ print("Address:file couple '%s' invalid." % arg)
+ sys.exit(1)
+ try:
+ address = int(address,0) & 0xFFFFFFFF
+ except ValueError:
+ print("Address %s invalid." % address)
+ sys.exit(1)
+ if not os.path.isfile(binfile):
+ print("Unreadable file '%s'." % binfile)
+ sys.exit(1)
+ checkbin(binfile)
+ target.append({ 'address': address, 'data': open(binfile,'rb').read() })
+ outfile = args[0]
+ device = DEFAULT_DEVICE
+ if options.device:
+ device=options.device
+ try:
+ v,d=[int(x,0) & 0xFFFF for x in device.split(':',1)]
+ except:
+ print("Invalid device '%s'." % device)
+ sys.exit(1)
+ build(outfile,[target],DEFAULT_NAME,device)
+ elif options.s19files and len(args)==1:
+ address = 0
+ data = ""
+ target = []
+ name = DEFAULT_NAME
+ with open(options.s19files) as f:
+ lines = f.readlines()
+ for line in lines:
+ curaddress = 0
+ curdata = ""
+ line = line.rstrip()
+ if line.startswith ( "S0" ):
+ name = binascii.a2b_hex(line[8:len(line) - 2]).replace(".s19", "")
+ elif line.startswith ( "S3" ):
+ try:
+ curaddress = int(line[4:12], 16) & 0xFFFFFFFF
+ except ValueError:
+ print("Address %s invalid." % address)
+ sys.exit(1)
+ curdata = binascii.unhexlify(line[12:-2])
+ elif line.startswith ( "S2" ):
+ try:
+ curaddress = int(line[4:10], 16) & 0xFFFFFFFF
+ except ValueError:
+ print("Address %s invalid." % address)
+ sys.exit(1)
+ curdata = binascii.unhexlify(line[10:-2])
+ elif line.startswith ( "S1" ):
+ try:
+ curaddress = int(line[4:8], 16) & 0xFFFFFFFF
+ except ValueError:
+ print("Address %s invalid." % address)
+ sys.exit(1)
+ curdata = binascii.unhexlify(line[8:-2])
+ if address == 0:
+ address = curaddress
+ data = curdata
+ elif address + len(data) != curaddress:
+ target.append({ 'address': address, 'data': data })
+ address = curaddress
+ data = curdata
+ else:
+ data += curdata
+ outfile = args[0]
+ device = DEFAULT_DEVICE
+ if options.device:
+ device=options.device
+ try:
+ v,d=[int(x,0) & 0xFFFF for x in device.split(':',1)]
+ except:
+ print("Invalid device '%s'." % device)
+ sys.exit(1)
+ build(outfile,[target],name,device)
+ elif len(args)==1:
+ infile = args[0]
+ if not os.path.isfile(infile):
+ print("Unreadable file '%s'." % infile)
+ sys.exit(1)
+ parse(infile, dump_images=options.dump_images)
+ else:
+ parser.print_help()
+ sys.exit(1)
--- /dev/null
+# Example udev rules (usually placed in /etc/udev/rules.d)
+# Makes STM32 DfuSe device writeable for the "plugdev" group
+
+ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE="664", GROUP="plugdev"
--- /dev/null
+man_MANS = dfu-util.1
+EXTRA_DIST = dfu-util.1 40-dfuse.rules
--- /dev/null
+From 1.0 to 1.1:
+----------------
+(Page references in 1.1 spec)
+
+Page 10: Added protocol column to table 3.2
+Page 12: Changed value for bInterfaceProtocol from 00h to 01h (table 4.1)
+Page 13: Added bitWillDetach flag in bmAttributes at bit 3 (table 4.2)
+ Changed bLength from 07h to 09h (table 4.2)
+Page 14: Added bcdDFUVersion (table 4.2)
+ Changed bDeviceClass value from FEh to 00h (table 4.3)
+ Changed bDevicesubClass value from 01h to 00h (table 4.3)
+Page 15: Changed bInterfaceProtocol value from 00h to 02h (table 4.4)
+Page 17: Adjust wording for bitWillDetach addition (5.1)
+Page 26: Adjust wording for bitWillDetach addition (7)
+Page 29: Adjust wording for bitWillDetach addition (A.2.1)
+
+Summary:
+- Addition of the bitWillDetach flag which allows the device to detach instead
+ of waiting of the host to reset the device.
+- Version changes for bInterfaceProtocol, bDeviceClass and bDevicesubClass
+- Addition of bcdDFUVersion
--- /dev/null
+.TH DFU-UTIL 1 "September 23, 2012"
+.SH NAME
+dfu-util \- Device firmware update (DFU) USB programmer
+.SH SYNOPSIS
+.\" Listing devices
+.HP
+.B dfu-util
+.B \-l
+.RB [\| \-v \|]
+.RB [\| \-d
+.IR vid:pid [\|, vid:pid \|]\|]
+.RB [\| \-p
+.IR path \|]
+.RB [\| \-c
+.IR configuration \|]
+.RB [\| \-i
+.IR interface \|]
+.RB [\| \-a
+.IR alt-intf \|]
+.RB [\| \-S
+.IR serial [\|, serial \|]\|]
+.\" Download to or upload from device
+.HP
+.B dfu-util
+.RB [\| \-v \|]
+.RB [\| \-d
+.IR vid:pid [\|, vid:pid \|]\|]
+.RB [\| \-p
+.IR path \|]
+.RB [\| \-c
+.IR configuration \|]
+.RB [\| \-i
+.IR interface \|]
+.RB [\| \-a
+.IR alt-intf \|]
+.RB [\| \-S
+.IR serial [\|, serial \|]\|]
+.RB [\| \-t
+.IR size \|]
+.RB [\| \-Z
+.IR size \|]
+.RB [\| \-s
+.IR address \|]
+.RB [\| \-R \|]
+.RB [\| \-D \||\| \-U
+.IR file \|]
+.\" --help and --version
+.HP
+.B dfu-util
+.RB [\| \-hV \|]
+.SH DESCRIPTION
+.B dfu-util
+is a program that implements the host (computer) side of the USB DFU
+(Universal Serial Bus Device Firmware Upgrade) protocol.
+.sp
+dfu-util communicates with devices that implement the device side of the
+USB DFU protocol, and is often used to upgrade the firmware of such
+devices.
+.SH OPTIONS
+.TP
+.B "\-l, \-\-list"
+List the currently attached DFU capable USB devices.
+.TP
+.BR "\-d, \-\-device" " [\fIRun-Time VENDOR\fP]:[\fIRun-Time PRODUCT\fP][,[\fIDFU Mode VENDOR\fP]:[\fIDFU Mode PRODUCT\fP]]"
+.RS
+Specify run-time and/or DFU mode vendor and/or product IDs of the DFU device
+to work with. \fBVENDOR\fP and \fBPRODUCT\fP are hexadecimal numbers (no prefix
+needed), "*" (match any), or "-" (match nothing). By default, any DFU capable
+device in either run-time or DFU mode will be considered.
+.sp
+If you only have one standards-compliant DFU device attached to your computer,
+this parameter is optional. However, as soon as you have multiple DFU devices
+connected, dfu-util will detect this and abort, asking you to specify which
+device to use.
+.sp
+If only run-time IDs are specified (e.g. "\fB--device 1457:51ab\fP"), then in
+addition to the specified run-time IDs, any DFU mode devices will also be
+considered. This is beneficial to allow a DFU capable device to be found
+again after a switch to DFU mode, since the vendor and/or product ID of a
+device usually changes in DFU mode.
+.sp
+If only DFU mode IDs are specified (e.g. "\fB--device ,951:26\fP"), then all
+run-time devices will be ignored, making it easy to target a specific device in
+DFU mode.
+.sp
+If both run-time and DFU mode IDs are specified (e.g. "\fB--device
+1457:51ab,:2bc\fP"), then unspecified DFU mode components will use the run-time
+value specified.
+.sp
+Examples:
+.TP
+.B "--device 1457:51ab,951:26"
+.br
+Work with a device in run-time mode with
+vendor ID 0x1457 and product ID 0x51ab, or in DFU mode with vendor ID 0x0951
+and product ID 0x0026
+.sp
+.TP
+.B "--device 1457:51ab,:2bc"
+.br
+Work with a device in run-time mode with vendor ID 0x1457 and product ID
+0x51ab, or in DFU mode with vendor ID 0x1457 and product ID 0x02bc
+.sp
+.TP
+.B "--device 1457:51ab"
+.br
+Work with a device in run-time mode with vendor ID 0x1457 and product ID
+0x51ab, or in DFU mode with any vendor and product ID
+.sp
+.TP
+.B "--device ,951:26"
+.br
+Work with a device in DFU mode with vendor ID 0x0951 and product ID 0x0026
+.sp
+.TP
+.B "--device *,-"
+.br
+Work with any device in run-time mode, and ignore any device in DFU mode
+.sp
+.TP
+.B "--device ,"
+.br
+Ignore any device in run-time mode, and Work with any device in DFU mode
+.RE
+.TP
+.BR "\-p, \-\-path" " BUS-PORT. ... .PORT"
+Specify the path to the DFU device.
+.TP
+.BR "\-c, \-\-cfg" " CONFIG-NR"
+Specify the configuration of the DFU device. Note that this is only used for matching, the configuration is not set by dfu-util.
+.TP
+.BR "\-i, \-\-intf" " INTF-NR"
+Specify the DFU interface number.
+.TP
+.BR "\-a, \-\-alt" " ALT"
+Specify the altsetting of the DFU interface by name or by number.
+.TP
+.BR "\-S, \-\-serial" " [\fIRun-Time SERIAL\fP][,[\fIDFU Mode SERIAL\fP]]"
+Specify the run-time and DFU mode serial numbers used to further restrict
+device matches. If multiple, identical DFU devices are simultaneously
+connected to a system then vendor and product ID will be insufficient for
+targeting a single device. In this situation, it may be possible to use this
+parameter to specify a serial number which also must match.
+.sp
+If only a single serial number is specified, then the same serial number is
+used in both run-time and DFU mode. An empty serial number will match any
+serial number in the corresponding mode.
+.TP
+.B "\-t, \-\-transfer-size" " SIZE"
+Specify the number of bytes per USB transfer. The optimal value is
+usually determined automatically so this option is rarely useful. If
+you need to use this option for a device, please report it as a bug.
+.TP
+.B "\-Z, \-\-upload-size" " SIZE"
+Specify the expected upload size, in bytes.
+.TP
+.BR "\-U, \-\-upload" " FILE"
+Read firmware from device into
+.BR FILE .
+.TP
+.BR "\-D, \-\-download" " FILE"
+Write firmware from
+.B FILE
+into device. When FILE is \-, the firmware is read from stdin.
+.TP
+.B "\-R, \-\-reset"
+Issue USB reset signalling after upload or download has finished.
+.TP
+.BR "\-s, \-\-dfuse-address" " address"
+Specify target address for raw binary download/upload on DfuSe devices. Do
+.B not
+use this for downloading DfuSe (.dfu) files. Modifiers can be added
+to the address, separated by a colon, to perform special DfuSE commands such
+as "leave" DFU mode, "unprotect" and "mass-erase" flash memory.
+.TP
+.B "\-v, \-\-verbose"
+Print more information about dfu-util's operation. A second
+.B -v
+will turn on verbose logging of USB requests. Repeat this option to further
+increase verbosity.
+.TP
+.B "\-h, \-\-help"
+Show a help text and exit.
+.TP
+.B "\-V, \-\-version"
+Show version information and exit.
+.SH EXAMPLES
+.SS Using dfu-util in the OpenMoko project
+(with the Neo1973 hardware)
+.PP
+Flashing the rootfs:
+.br
+.B " $ dfu-util -a rootfs -R -D /path/to/openmoko-devel-image.jffs2"
+.PP
+Flashing the kernel:
+.br
+.B " $ dfu-util -a kernel -R -D /path/to/uImage"
+.PP
+Flashing the bootloader:
+.br
+.B " $ dfu-util -a u-boot -R -D /path/to/u-boot.bin"
+.PP
+Copying a kernel into RAM:
+.br
+.B " $ dfu-util -a 0 -R -D /path/to/uImage"
+.sp
+Once this has finished, the kernel will be available at the default load
+address of 0x32000000 in Neo1973 RAM.
+.B Note:
+You cannot transfer more than 2MB of data into RAM using this method.
+.sp
+.SS Using dfu-util with a DfuSe device
+.PP
+Flashing a
+.B .dfu
+(special DfuSe format) file to the device:
+.br
+.B " $ dfu-util -a 0 -D /path/to/dfuse-image.dfu"
+.PP
+Reading out 1 KB of flash starting at address 0x8000000:
+.br
+.B " $ dfu-util -a 0 -s 0x08000000:1024 -U newfile.bin"
+.PP
+Flashing a binary file to address 0x8004000 of device memory and
+ask the device to leave DFU mode:
+.br
+.B " $ dfu-util -a 0 -s 0x08004000:leave -D /path/to/image.bin"
+.\" There are no bugs of course
+.SH BUGS
+Please report any bugs to the dfu-util bug tracker at
+.BR http://sourceforge.net/p/dfu-util/tickets/ .
+Please use the
+.IR --verbose " option (repeated as necessary) to provide more"
+information in your bug report.
+.SH SEE ALSO
+The dfu-util home page is
+.B http://sourceforge.net/p/dfu-util/
+.SH HISTORY
+dfu-util was originally written for the OpenMoko project by
+Weston Schmidt <weston_schmidt@yahoo.com> and
+Harald Welte <hwelte@hmw-consulting.de>. Over time, nearly complete
+support of DFU 1.0, DFU 1.1 and DfuSe ("1.1a") has been added.
+.SH LICENCE
+.B dfu-util
+is covered by the GNU General Public License (GPL), version 2 or later.
+.SH COPYRIGHT
+This manual page was originally written by Uwe Hermann <uwe@hermann-uwe.de>,
+and is now part of the dfu-util project.
--- /dev/null
+# (C) Roger Meier <r.meier@siemens.com>
+# (C) Pascal Schweizer <pascal.schweizer@siemens.com>
+# msvc folder is GPL-2.0+, LGPL-2.1+, BSD-3-Clause or MIT license(SPDX)
+
+Building dfu-util native on Windows with Visual Studio
+
+3rd party dependencies:
+- libusbx ( git clone https://github.com/libusbx/libusbx.git )
+ - getopt (part of libusbx: libusbx/examples/getopt)
+
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{8F7600A2-3B37-4956-B39B-A1D43EF29EDA}</ProjectGuid>
+ <RootNamespace>dfusuffix</RootNamespace>
+ <ProjectName>dfu-suffix</ProjectName>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>true</UseDebugLibraries>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>false</UseDebugLibraries>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <IncludePath>$(SolutionDir)..\..\libusbx\examples\getopt;$(SolutionDir)..\..\libusbx\libusb;$(IncludePath)</IncludePath>
+ <OutDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</OutDir>
+ <IntDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</IntDir>
+ <LibraryPath>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\dll;$(LibraryPath)</LibraryPath>
+ <ReferencePath>$(VCInstallDir)atlmfc\lib;$(VCInstallDir)lib</ReferencePath>
+ <ExecutablePath>$(ExecutablePath)</ExecutablePath>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ExecutablePath>$(ExecutablePath)</ExecutablePath>
+ <IncludePath>$(SolutionDir)..\..\libusbx\examples\getopt;$(SolutionDir)..\..\libusbx\libusb;$(IncludePath)</IncludePath>
+ <LibraryPath>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\dll;$(LibraryPath)</LibraryPath>
+ <OutDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</OutDir>
+ <IntDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>Disabled</Optimization>
+ <PreprocessorDefinitions>HAVE_WINDOWS_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>MaxSpeed</Optimization>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <IntrinsicFunctions>true</IntrinsicFunctions>
+ <PreprocessorDefinitions>HAVE_WINDOWS_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <OptimizeReferences>true</OptimizeReferences>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\src\dfu_file.c" />
+ <ClCompile Include="..\src\suffix.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\src\dfu_file.h" />
+ <ClInclude Include="..\src\portable.h" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\libusbx\msvc\getopt_2010.vcxproj">
+ <Project>{a2169bc8-cf99-40bf-83f3-b0e38f7067bd}</Project>
+ </ProjectReference>
+ <ProjectReference Include="..\..\libusbx\msvc\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "dfu-util", "dfu-util_2010.vcxproj", "{0E071A60-7EF2-4427-BAA8-9143CACB5BCB}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Solution Items", "Solution Items", "{C4F8746D-B27E-4806-95E5-2052174E923B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "dfu-suffix", "dfu-suffix_2010.vcxproj", "{8F7600A2-3B37-4956-B39B-A1D43EF29EDA}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "getopt_2010", "..\..\libusbx\msvc\getopt_2010.vcxproj", "{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "..\..\libusbx\msvc\libusb_static_2010.vcxproj", "{349EE8F9-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Debug|Win32.ActiveCfg = Debug|Win32
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Debug|Win32.Build.0 = Debug|Win32
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Debug|x64.ActiveCfg = Debug|Win32
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Release|Win32.ActiveCfg = Release|Win32
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Release|Win32.Build.0 = Release|Win32
+ {0E071A60-7EF2-4427-BAA8-9143CACB5BCB}.Release|x64.ActiveCfg = Release|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Debug|Win32.Build.0 = Debug|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Debug|x64.ActiveCfg = Debug|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Release|Win32.ActiveCfg = Release|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Release|Win32.Build.0 = Release|Win32
+ {8F7600A2-3B37-4956-B39B-A1D43EF29EDA}.Release|x64.ActiveCfg = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.Build.0 = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.ActiveCfg = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.Build.0 = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.ActiveCfg = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.Build.0 = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.ActiveCfg = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.Build.0 = Release|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.Build.0 = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.Build.0 = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{0E071A60-7EF2-4427-BAA8-9143CACB5BCB}</ProjectGuid>
+ <RootNamespace>dfuutil</RootNamespace>
+ <ProjectName>dfu-util</ProjectName>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>true</UseDebugLibraries>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>false</UseDebugLibraries>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <IncludePath>$(SolutionDir)..\..\libusbx\examples\getopt;$(SolutionDir)..\..\libusbx\libusb;$(IncludePath)</IncludePath>
+ <OutDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</OutDir>
+ <IntDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</IntDir>
+ <LibraryPath>$(SolutionDir)..\$(Platform)\getopt\$(Configuration);$(LibraryPath)</LibraryPath>
+ <ReferencePath>$(VCInstallDir)atlmfc\lib;$(VCInstallDir)lib</ReferencePath>
+ <ExecutablePath>$(ExecutablePath)</ExecutablePath>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ExecutablePath>$(ExecutablePath)</ExecutablePath>
+ <IncludePath>$(SolutionDir)..\..\libusbx\examples\getopt;$(SolutionDir)..\..\libusbx\libusb;$(IncludePath)</IncludePath>
+ <LibraryPath>$(SolutionDir)..\$(Platform)\getopt\$(Configuration);$(LibraryPath)</LibraryPath>
+ <OutDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</OutDir>
+ <IntDir>$(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>Disabled</Optimization>
+ <PreprocessorDefinitions>HAVE_WINDOWS_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ <PostBuildEvent>
+ <Command>
+ </Command>
+ </PostBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>MaxSpeed</Optimization>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <IntrinsicFunctions>true</IntrinsicFunctions>
+ <PreprocessorDefinitions>HAVE_WINDOWS_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <OptimizeReferences>true</OptimizeReferences>
+ </Link>
+ <PostBuildEvent>
+ <Command>copy $(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0.dll $(SolutionDir)..\$(Platform)\$(ProjectName)\$(Configuration)\</Command>
+ </PostBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\src\dfu.c" />
+ <ClCompile Include="..\src\dfuse.c" />
+ <ClCompile Include="..\src\dfuse_mem.c" />
+ <ClCompile Include="..\src\dfu_file.c" />
+ <ClCompile Include="..\src\dfu_load.c" />
+ <ClCompile Include="..\src\dfu_util.c" />
+ <ClCompile Include="..\src\main.c" />
+ <ClCompile Include="..\src\quirks.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\src\dfu.h" />
+ <ClInclude Include="..\src\dfuse.h" />
+ <ClInclude Include="..\src\dfuse_mem.h" />
+ <ClInclude Include="..\src\dfu_file.h" />
+ <ClInclude Include="..\src\dfu_load.h" />
+ <ClInclude Include="..\src\dfu_util.h" />
+ <ClInclude Include="..\src\portable.h" />
+ <ClInclude Include="..\src\quirks.h" />
+ <ClInclude Include="..\src\usb_dfu.h" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\libusbx\msvc\getopt_2010.vcxproj">
+ <Project>{a2169bc8-cf99-40bf-83f3-b0e38f7067bd}</Project>
+ </ProjectReference>
+ <ProjectReference Include="..\..\libusbx\msvc\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+AM_CFLAGS = -Wall -Wextra
+
+bin_PROGRAMS = dfu-util dfu-suffix dfu-prefix
+dfu_util_SOURCES = main.c \
+ portable.h \
+ dfu_load.c \
+ dfu_load.h \
+ dfu_util.c \
+ dfu_util.h \
+ dfuse.c \
+ dfuse.h \
+ dfuse_mem.c \
+ dfuse_mem.h \
+ dfu.c \
+ dfu.h \
+ usb_dfu.h \
+ dfu_file.c \
+ dfu_file.h \
+ quirks.c \
+ quirks.h
+
+dfu_suffix_SOURCES = suffix.c \
+ dfu_file.h \
+ dfu_file.c
+
+dfu_prefix_SOURCES = prefix.c \
+ dfu_file.h \
+ dfu_file.c
--- /dev/null
+/*
+ * Low-level DFU communication routines, originally taken from
+ * $Id: dfu.c,v 1.3 2006/06/20 06:28:04 schmidtw Exp $
+ * (part of dfu-programmer).
+ *
+ * Copyright 2005-2006 Weston Schmidt <weston_schmidt@alumni.purdue.edu>
+ * Copyright 2011-2014 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <libusb.h>
+
+#include "portable.h"
+#include "dfu.h"
+#include "quirks.h"
+
+static int dfu_timeout = 5000; /* 5 seconds - default */
+
+/*
+ * DFU_DETACH Request (DFU Spec 1.0, Section 5.1)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ * timeout - the timeout in ms the USB device should wait for a pending
+ * USB reset before giving up and terminating the operation
+ *
+ * returns 0 or < 0 on error
+ */
+int dfu_detach( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short timeout )
+{
+ return libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_DETACH,
+ /* wValue */ timeout,
+ /* wIndex */ interface,
+ /* Data */ NULL,
+ /* wLength */ 0,
+ dfu_timeout );
+}
+
+
+/*
+ * DFU_DNLOAD Request (DFU Spec 1.0, Section 6.1.1)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ * length - the total number of bytes to transfer to the USB
+ * device - must be less than wTransferSize
+ * data - the data to transfer
+ *
+ * returns the number of bytes written or < 0 on error
+ */
+int dfu_download( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short length,
+ const unsigned short transaction,
+ unsigned char* data )
+{
+ int status;
+
+ status = libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_DNLOAD,
+ /* wValue */ transaction,
+ /* wIndex */ interface,
+ /* Data */ data,
+ /* wLength */ length,
+ dfu_timeout );
+ return status;
+}
+
+
+/*
+ * DFU_UPLOAD Request (DFU Spec 1.0, Section 6.2)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ * length - the maximum number of bytes to receive from the USB
+ * device - must be less than wTransferSize
+ * data - the buffer to put the received data in
+ *
+ * returns the number of bytes received or < 0 on error
+ */
+int dfu_upload( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short length,
+ const unsigned short transaction,
+ unsigned char* data )
+{
+ int status;
+
+ status = libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_UPLOAD,
+ /* wValue */ transaction,
+ /* wIndex */ interface,
+ /* Data */ data,
+ /* wLength */ length,
+ dfu_timeout );
+ return status;
+}
+
+
+/*
+ * DFU_GETSTATUS Request (DFU Spec 1.0, Section 6.1.2)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ * status - the data structure to be populated with the results
+ *
+ * return the number of bytes read in or < 0 on an error
+ */
+int dfu_get_status( struct dfu_if *dif, struct dfu_status *status )
+{
+ unsigned char buffer[6];
+ int result;
+
+ /* Initialize the status data structure */
+ status->bStatus = DFU_STATUS_ERROR_UNKNOWN;
+ status->bwPollTimeout = 0;
+ status->bState = STATE_DFU_ERROR;
+ status->iString = 0;
+
+ result = libusb_control_transfer( dif->dev_handle,
+ /* bmRequestType */ LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_GETSTATUS,
+ /* wValue */ 0,
+ /* wIndex */ dif->interface,
+ /* Data */ buffer,
+ /* wLength */ 6,
+ dfu_timeout );
+
+ if( 6 == result ) {
+ status->bStatus = buffer[0];
+ if (dif->quirks & QUIRK_POLLTIMEOUT)
+ status->bwPollTimeout = DEFAULT_POLLTIMEOUT;
+ else
+ status->bwPollTimeout = ((0xff & buffer[3]) << 16) |
+ ((0xff & buffer[2]) << 8) |
+ (0xff & buffer[1]);
+ status->bState = buffer[4];
+ status->iString = buffer[5];
+ }
+
+ return result;
+}
+
+
+/*
+ * DFU_CLRSTATUS Request (DFU Spec 1.0, Section 6.1.3)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ *
+ * return 0 or < 0 on an error
+ */
+int dfu_clear_status( libusb_device_handle *device,
+ const unsigned short interface )
+{
+ return libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_OUT| LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_CLRSTATUS,
+ /* wValue */ 0,
+ /* wIndex */ interface,
+ /* Data */ NULL,
+ /* wLength */ 0,
+ dfu_timeout );
+}
+
+
+/*
+ * DFU_GETSTATE Request (DFU Spec 1.0, Section 6.1.5)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ * length - the maximum number of bytes to receive from the USB
+ * device - must be less than wTransferSize
+ * data - the buffer to put the received data in
+ *
+ * returns the state or < 0 on error
+ */
+int dfu_get_state( libusb_device_handle *device,
+ const unsigned short interface )
+{
+ int result;
+ unsigned char buffer[1];
+
+ result = libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_GETSTATE,
+ /* wValue */ 0,
+ /* wIndex */ interface,
+ /* Data */ buffer,
+ /* wLength */ 1,
+ dfu_timeout );
+
+ /* Return the error if there is one. */
+ if (result < 1)
+ return -1;
+
+ /* Return the state. */
+ return buffer[0];
+}
+
+
+/*
+ * DFU_ABORT Request (DFU Spec 1.0, Section 6.1.4)
+ *
+ * device - the usb_dev_handle to communicate with
+ * interface - the interface to communicate with
+ *
+ * returns 0 or < 0 on an error
+ */
+int dfu_abort( libusb_device_handle *device,
+ const unsigned short interface )
+{
+ return libusb_control_transfer( device,
+ /* bmRequestType */ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_ABORT,
+ /* wValue */ 0,
+ /* wIndex */ interface,
+ /* Data */ NULL,
+ /* wLength */ 0,
+ dfu_timeout );
+}
+
+
+const char* dfu_state_to_string( int state )
+{
+ const char *message;
+
+ switch (state) {
+ case STATE_APP_IDLE:
+ message = "appIDLE";
+ break;
+ case STATE_APP_DETACH:
+ message = "appDETACH";
+ break;
+ case STATE_DFU_IDLE:
+ message = "dfuIDLE";
+ break;
+ case STATE_DFU_DOWNLOAD_SYNC:
+ message = "dfuDNLOAD-SYNC";
+ break;
+ case STATE_DFU_DOWNLOAD_BUSY:
+ message = "dfuDNBUSY";
+ break;
+ case STATE_DFU_DOWNLOAD_IDLE:
+ message = "dfuDNLOAD-IDLE";
+ break;
+ case STATE_DFU_MANIFEST_SYNC:
+ message = "dfuMANIFEST-SYNC";
+ break;
+ case STATE_DFU_MANIFEST:
+ message = "dfuMANIFEST";
+ break;
+ case STATE_DFU_MANIFEST_WAIT_RESET:
+ message = "dfuMANIFEST-WAIT-RESET";
+ break;
+ case STATE_DFU_UPLOAD_IDLE:
+ message = "dfuUPLOAD-IDLE";
+ break;
+ case STATE_DFU_ERROR:
+ message = "dfuERROR";
+ break;
+ default:
+ message = NULL;
+ break;
+ }
+
+ return message;
+}
+
+/* Chapter 6.1.2 */
+static const char *dfu_status_names[] = {
+ /* DFU_STATUS_OK */
+ "No error condition is present",
+ /* DFU_STATUS_errTARGET */
+ "File is not targeted for use by this device",
+ /* DFU_STATUS_errFILE */
+ "File is for this device but fails some vendor-specific test",
+ /* DFU_STATUS_errWRITE */
+ "Device is unable to write memory",
+ /* DFU_STATUS_errERASE */
+ "Memory erase function failed",
+ /* DFU_STATUS_errCHECK_ERASED */
+ "Memory erase check failed",
+ /* DFU_STATUS_errPROG */
+ "Program memory function failed",
+ /* DFU_STATUS_errVERIFY */
+ "Programmed memory failed verification",
+ /* DFU_STATUS_errADDRESS */
+ "Cannot program memory due to received address that is out of range",
+ /* DFU_STATUS_errNOTDONE */
+ "Received DFU_DNLOAD with wLength = 0, but device does not think that it has all data yet",
+ /* DFU_STATUS_errFIRMWARE */
+ "Device's firmware is corrupt. It cannot return to run-time (non-DFU) operations",
+ /* DFU_STATUS_errVENDOR */
+ "iString indicates a vendor specific error",
+ /* DFU_STATUS_errUSBR */
+ "Device detected unexpected USB reset signalling",
+ /* DFU_STATUS_errPOR */
+ "Device detected unexpected power on reset",
+ /* DFU_STATUS_errUNKNOWN */
+ "Something went wrong, but the device does not know what it was",
+ /* DFU_STATUS_errSTALLEDPKT */
+ "Device stalled an unexpected request"
+};
+
+
+const char *dfu_status_to_string(int status)
+{
+ if (status > DFU_STATUS_errSTALLEDPKT)
+ return "INVALID";
+ return dfu_status_names[status];
+}
+
+int dfu_abort_to_idle(struct dfu_if *dif)
+{
+ int ret;
+ struct dfu_status dst;
+
+ ret = dfu_abort(dif->dev_handle, dif->interface);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error sending dfu abort request");
+ exit(1);
+ }
+ ret = dfu_get_status(dif, &dst);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during abort get_status");
+ exit(1);
+ }
+ if (dst.bState != DFU_STATE_dfuIDLE) {
+ errx(EX_IOERR, "Failed to enter idle state on abort");
+ exit(1);
+ }
+ milli_sleep(dst.bwPollTimeout);
+ return ret;
+}
--- /dev/null
+/*
+ * dfu-programmer
+ *
+ * $Id: dfu.h,v 1.2 2005/09/25 01:27:42 schmidtw Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DFU_H
+#define DFU_H
+
+#include <libusb.h>
+#include "usb_dfu.h"
+
+/* DFU states */
+#define STATE_APP_IDLE 0x00
+#define STATE_APP_DETACH 0x01
+#define STATE_DFU_IDLE 0x02
+#define STATE_DFU_DOWNLOAD_SYNC 0x03
+#define STATE_DFU_DOWNLOAD_BUSY 0x04
+#define STATE_DFU_DOWNLOAD_IDLE 0x05
+#define STATE_DFU_MANIFEST_SYNC 0x06
+#define STATE_DFU_MANIFEST 0x07
+#define STATE_DFU_MANIFEST_WAIT_RESET 0x08
+#define STATE_DFU_UPLOAD_IDLE 0x09
+#define STATE_DFU_ERROR 0x0a
+
+
+/* DFU status */
+#define DFU_STATUS_OK 0x00
+#define DFU_STATUS_ERROR_TARGET 0x01
+#define DFU_STATUS_ERROR_FILE 0x02
+#define DFU_STATUS_ERROR_WRITE 0x03
+#define DFU_STATUS_ERROR_ERASE 0x04
+#define DFU_STATUS_ERROR_CHECK_ERASED 0x05
+#define DFU_STATUS_ERROR_PROG 0x06
+#define DFU_STATUS_ERROR_VERIFY 0x07
+#define DFU_STATUS_ERROR_ADDRESS 0x08
+#define DFU_STATUS_ERROR_NOTDONE 0x09
+#define DFU_STATUS_ERROR_FIRMWARE 0x0a
+#define DFU_STATUS_ERROR_VENDOR 0x0b
+#define DFU_STATUS_ERROR_USBR 0x0c
+#define DFU_STATUS_ERROR_POR 0x0d
+#define DFU_STATUS_ERROR_UNKNOWN 0x0e
+#define DFU_STATUS_ERROR_STALLEDPKT 0x0f
+
+/* DFU commands */
+#define DFU_DETACH 0
+#define DFU_DNLOAD 1
+#define DFU_UPLOAD 2
+#define DFU_GETSTATUS 3
+#define DFU_CLRSTATUS 4
+#define DFU_GETSTATE 5
+#define DFU_ABORT 6
+
+/* DFU interface */
+#define DFU_IFF_DFU 0x0001 /* DFU Mode, (not Runtime) */
+
+/* This is based off of DFU_GETSTATUS
+ *
+ * 1 unsigned byte bStatus
+ * 3 unsigned byte bwPollTimeout
+ * 1 unsigned byte bState
+ * 1 unsigned byte iString
+*/
+
+struct dfu_status {
+ unsigned char bStatus;
+ unsigned int bwPollTimeout;
+ unsigned char bState;
+ unsigned char iString;
+};
+
+struct dfu_if {
+ struct usb_dfu_func_descriptor func_dfu;
+ uint16_t quirks;
+ uint16_t busnum;
+ uint16_t devnum;
+ uint16_t vendor;
+ uint16_t product;
+ uint16_t bcdDevice;
+ uint8_t configuration;
+ uint8_t interface;
+ uint8_t altsetting;
+ uint8_t flags;
+ uint8_t bMaxPacketSize0;
+ char *alt_name;
+ char *serial_name;
+ libusb_device *dev;
+ libusb_device_handle *dev_handle;
+ struct dfu_if *next;
+};
+
+int dfu_detach( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short timeout );
+int dfu_download( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short length,
+ const unsigned short transaction,
+ unsigned char* data );
+int dfu_upload( libusb_device_handle *device,
+ const unsigned short interface,
+ const unsigned short length,
+ const unsigned short transaction,
+ unsigned char* data );
+int dfu_get_status( struct dfu_if *dif,
+ struct dfu_status *status );
+int dfu_clear_status( libusb_device_handle *device,
+ const unsigned short interface );
+int dfu_get_state( libusb_device_handle *device,
+ const unsigned short interface );
+int dfu_abort( libusb_device_handle *device,
+ const unsigned short interface );
+int dfu_abort_to_idle( struct dfu_if *dif);
+
+const char *dfu_state_to_string( int state );
+
+const char *dfu_status_to_string( int status );
+
+#endif /* DFU_H */
--- /dev/null
+/*
+ * Load or store DFU files including suffix and prefix
+ *
+ * Copyright 2014 Tormod Volden <debian.tormod@gmail.com>
+ * Copyright 2012 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <time.h>
+#include <fcntl.h>
+
+#include "portable.h"
+#include "dfu_file.h"
+
+#define DFU_SUFFIX_LENGTH 16
+#define LMDFU_PREFIX_LENGTH 8
+#define LPCDFU_PREFIX_LENGTH 16
+#define PROGRESS_BAR_WIDTH 25
+#define STDIN_CHUNK_SIZE 65536
+
+static const unsigned long crc32_table[] = {
+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+ 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+ 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+ 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+ 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+ 0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+ 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+ 0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+ 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+ 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+ 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+ 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+ 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+ 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+ 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+ 0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+ 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+ 0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+ 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+ 0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+ 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+ 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d};
+
+static uint32_t crc32_byte(uint32_t accum, uint8_t delta)
+{
+ return crc32_table[(accum ^ delta) & 0xff] ^ (accum >> 8);
+}
+
+static int probe_prefix(struct dfu_file *file)
+{
+ uint8_t *prefix = file->firmware;
+
+ if (file->size.total < LMDFU_PREFIX_LENGTH)
+ return 1;
+ if ((prefix[0] == 0x01) && (prefix[1] == 0x00)) {
+ file->prefix_type = LMDFU_PREFIX;
+ file->size.prefix = LMDFU_PREFIX_LENGTH;
+ file->lmdfu_address = 1024 * ((prefix[3] << 8) | prefix[2]);
+ }
+ else if (((prefix[0] & 0x3f) == 0x1a) && ((prefix[1] & 0x3f)== 0x3f)) {
+ file->prefix_type = LPCDFU_UNENCRYPTED_PREFIX;
+ file->size.prefix = LPCDFU_PREFIX_LENGTH;
+ }
+
+ if (file->size.prefix + file->size.suffix > file->size.total)
+ return 1;
+ return 0;
+}
+
+void dfu_progress_bar(const char *desc, unsigned long long curr,
+ unsigned long long max)
+{
+ static char buf[PROGRESS_BAR_WIDTH + 1];
+ static unsigned long long last_progress = -1;
+ static time_t last_time;
+ time_t curr_time = time(NULL);
+ unsigned long long progress;
+ unsigned long long x;
+
+ /* check for not known maximum */
+ if (max < curr)
+ max = curr + 1;
+ /* make none out of none give zero */
+ if (max == 0 && curr == 0)
+ max = 1;
+
+ /* compute completion */
+ progress = (PROGRESS_BAR_WIDTH * curr) / max;
+ if (progress > PROGRESS_BAR_WIDTH)
+ progress = PROGRESS_BAR_WIDTH;
+ if (progress == last_progress &&
+ curr_time == last_time)
+ return;
+ last_progress = progress;
+ last_time = curr_time;
+
+ for (x = 0; x != PROGRESS_BAR_WIDTH; x++) {
+ if (x < progress)
+ buf[x] = '=';
+ else
+ buf[x] = ' ';
+ }
+ buf[x] = 0;
+
+ printf("\r%s\t[%s] %3lld%% %12lld bytes", desc, buf,
+ (100ULL * curr) / max, curr);
+
+ if (progress == PROGRESS_BAR_WIDTH)
+ printf("\n%s done.\n", desc);
+}
+
+void *dfu_malloc(size_t size)
+{
+ void *ptr = malloc(size);
+ if (ptr == NULL)
+ errx(EX_SOFTWARE, "Cannot allocate memory of size %d bytes", (int)size);
+ return (ptr);
+}
+
+uint32_t dfu_file_write_crc(int f, uint32_t crc, const void *buf, int size)
+{
+ int x;
+
+ /* compute CRC */
+ for (x = 0; x != size; x++)
+ crc = crc32_byte(crc, ((uint8_t *)buf)[x]);
+
+ /* write data */
+ if (write(f, buf, size) != size)
+ err(EX_IOERR, "Could not write %d bytes to file %d", size, f);
+
+ return (crc);
+}
+
+void dfu_load_file(struct dfu_file *file, enum suffix_req check_suffix, enum prefix_req check_prefix)
+{
+ off_t offset;
+ int f;
+ int i;
+ int res;
+
+ file->size.prefix = 0;
+ file->size.suffix = 0;
+
+ /* default values, if no valid suffix is found */
+ file->bcdDFU = 0;
+ file->idVendor = 0xffff; /* wildcard value */
+ file->idProduct = 0xffff; /* wildcard value */
+ file->bcdDevice = 0xffff; /* wildcard value */
+
+ /* default values, if no valid prefix is found */
+ file->lmdfu_address = 0;
+
+ free(file->firmware);
+
+ if (!strcmp(file->name, "-")) {
+ int read_bytes;
+
+#ifdef WIN32
+ _setmode( _fileno( stdin ), _O_BINARY );
+#endif
+ file->firmware = (uint8_t*) dfu_malloc(STDIN_CHUNK_SIZE);
+ read_bytes = fread(file->firmware, 1, STDIN_CHUNK_SIZE, stdin);
+ file->size.total = read_bytes;
+ while (read_bytes == STDIN_CHUNK_SIZE) {
+ file->firmware = (uint8_t*) realloc(file->firmware, file->size.total + STDIN_CHUNK_SIZE);
+ if (!file->firmware)
+ err(EX_IOERR, "Could not allocate firmware buffer");
+ read_bytes = fread(file->firmware + file->size.total, 1, STDIN_CHUNK_SIZE, stdin);
+ file->size.total += read_bytes;
+ }
+ if (verbose)
+ printf("Read %i bytes from stdin\n", file->size.total);
+ /* Never require suffix when reading from stdin */
+ check_suffix = MAYBE_SUFFIX;
+ } else {
+ f = open(file->name, O_RDONLY | O_BINARY);
+ if (f < 0)
+ err(EX_IOERR, "Could not open file %s for reading", file->name);
+
+ offset = lseek(f, 0, SEEK_END);
+
+ if ((int)offset < 0 || (int)offset != offset)
+ err(EX_IOERR, "File size is too big");
+
+ if (lseek(f, 0, SEEK_SET) != 0)
+ err(EX_IOERR, "Could not seek to beginning");
+
+ file->size.total = offset;
+ file->firmware = dfu_malloc(file->size.total);
+
+ if (read(f, file->firmware, file->size.total) != file->size.total) {
+ err(EX_IOERR, "Could not read %d bytes from %s",
+ file->size.total, file->name);
+ }
+ close(f);
+ }
+
+ /* Check for possible DFU file suffix by trying to parse one */
+ {
+ uint32_t crc = 0xffffffff;
+ const uint8_t *dfusuffix;
+ int missing_suffix = 0;
+ const char *reason;
+
+ if (file->size.total < DFU_SUFFIX_LENGTH) {
+ reason = "File too short for DFU suffix";
+ missing_suffix = 1;
+ goto checked;
+ }
+
+ dfusuffix = file->firmware + file->size.total -
+ DFU_SUFFIX_LENGTH;
+
+ for (i = 0; i < file->size.total - 4; i++)
+ crc = crc32_byte(crc, file->firmware[i]);
+
+ if (dfusuffix[10] != 'D' ||
+ dfusuffix[9] != 'F' ||
+ dfusuffix[8] != 'U') {
+ reason = "Invalid DFU suffix signature";
+ missing_suffix = 1;
+ goto checked;
+ }
+
+ file->dwCRC = (dfusuffix[15] << 24) +
+ (dfusuffix[14] << 16) +
+ (dfusuffix[13] << 8) +
+ dfusuffix[12];
+
+ if (file->dwCRC != crc) {
+ reason = "DFU suffix CRC does not match";
+ missing_suffix = 1;
+ goto checked;
+ }
+
+ /* At this point we believe we have a DFU suffix
+ so we require further checks to succeed */
+
+ file->bcdDFU = (dfusuffix[7] << 8) + dfusuffix[6];
+
+ if (verbose)
+ printf("DFU suffix version %x\n", file->bcdDFU);
+
+ file->size.suffix = dfusuffix[11];
+
+ if (file->size.suffix < DFU_SUFFIX_LENGTH) {
+ errx(EX_IOERR, "Unsupported DFU suffix length %d",
+ file->size.suffix);
+ }
+
+ if (file->size.suffix > file->size.total) {
+ errx(EX_IOERR, "Invalid DFU suffix length %d",
+ file->size.suffix);
+ }
+
+ file->idVendor = (dfusuffix[5] << 8) + dfusuffix[4];
+ file->idProduct = (dfusuffix[3] << 8) + dfusuffix[2];
+ file->bcdDevice = (dfusuffix[1] << 8) + dfusuffix[0];
+
+checked:
+ if (missing_suffix) {
+ if (check_suffix == NEEDS_SUFFIX) {
+ warnx("%s", reason);
+ errx(EX_IOERR, "Valid DFU suffix needed");
+ } else if (check_suffix == MAYBE_SUFFIX) {
+ warnx("%s", reason);
+ warnx("A valid DFU suffix will be required in "
+ "a future dfu-util release!!!");
+ }
+ } else {
+ if (check_suffix == NO_SUFFIX) {
+ errx(EX_SOFTWARE, "Please remove existing DFU suffix before adding a new one.\n");
+ }
+ }
+ }
+ res = probe_prefix(file);
+ if ((res || file->size.prefix == 0) && check_prefix == NEEDS_PREFIX)
+ errx(EX_IOERR, "Valid DFU prefix needed");
+ if (file->size.prefix && check_prefix == NO_PREFIX)
+ errx(EX_IOERR, "A prefix already exists, please delete it first");
+ if (file->size.prefix && verbose) {
+ uint8_t *data = file->firmware;
+ if (file->prefix_type == LMDFU_PREFIX)
+ printf("Possible TI Stellaris DFU prefix with "
+ "the following properties\n"
+ "Address: 0x%08x\n"
+ "Payload length: %d\n",
+ file->lmdfu_address,
+ data[4] | (data[5] << 8) |
+ (data[6] << 16) | (data[7] << 14));
+ else if (file->prefix_type == LPCDFU_UNENCRYPTED_PREFIX)
+ printf("Possible unencrypted NXP LPC DFU prefix with "
+ "the following properties\n"
+ "Payload length: %d kiByte\n",
+ data[2] >>1 | (data[3] << 7) );
+ else
+ errx(EX_IOERR, "Unknown DFU prefix type");
+ }
+}
+
+void dfu_store_file(struct dfu_file *file, int write_suffix, int write_prefix)
+{
+ uint32_t crc = 0xffffffff;
+ int f;
+
+ f = open(file->name, O_WRONLY | O_BINARY | O_TRUNC | O_CREAT, 0666);
+ if (f < 0)
+ err(EX_IOERR, "Could not open file %s for writing", file->name);
+
+ /* write prefix, if any */
+ if (write_prefix) {
+ if (file->prefix_type == LMDFU_PREFIX) {
+ uint8_t lmdfu_prefix[LMDFU_PREFIX_LENGTH];
+ uint32_t addr = file->lmdfu_address / 1024;
+
+ /* lmdfu_dfu_prefix payload length excludes prefix and suffix */
+ uint32_t len = file->size.total -
+ file->size.prefix - file->size.suffix;
+
+ lmdfu_prefix[0] = 0x01; /* STELLARIS_DFU_PROG */
+ lmdfu_prefix[1] = 0x00; /* Reserved */
+ lmdfu_prefix[2] = (uint8_t)(addr & 0xff);
+ lmdfu_prefix[3] = (uint8_t)(addr >> 8);
+ lmdfu_prefix[4] = (uint8_t)(len & 0xff);
+ lmdfu_prefix[5] = (uint8_t)(len >> 8) & 0xff;
+ lmdfu_prefix[6] = (uint8_t)(len >> 16) & 0xff;
+ lmdfu_prefix[7] = (uint8_t)(len >> 24);
+
+ crc = dfu_file_write_crc(f, crc, lmdfu_prefix, LMDFU_PREFIX_LENGTH);
+ }
+ if (file->prefix_type == LPCDFU_UNENCRYPTED_PREFIX) {
+ uint8_t lpcdfu_prefix[LPCDFU_PREFIX_LENGTH] = {0};
+ int i;
+
+ /* Payload is firmware and prefix rounded to 512 bytes */
+ uint32_t len = (file->size.total - file->size.suffix + 511) /512;
+
+ lpcdfu_prefix[0] = 0x1a; /* Unencypted*/
+ lpcdfu_prefix[1] = 0x3f; /* Reserved */
+ lpcdfu_prefix[2] = (uint8_t)(len & 0xff);
+ lpcdfu_prefix[3] = (uint8_t)((len >> 8) & 0xff);
+ for (i = 12; i < LPCDFU_PREFIX_LENGTH; i++)
+ lpcdfu_prefix[i] = 0xff;
+
+ crc = dfu_file_write_crc(f, crc, lpcdfu_prefix, LPCDFU_PREFIX_LENGTH);
+ }
+ }
+ /* write firmware binary */
+ crc = dfu_file_write_crc(f, crc, file->firmware + file->size.prefix,
+ file->size.total - file->size.prefix - file->size.suffix);
+
+ /* write suffix, if any */
+ if (write_suffix) {
+ uint8_t dfusuffix[DFU_SUFFIX_LENGTH];
+
+ dfusuffix[0] = file->bcdDevice & 0xff;
+ dfusuffix[1] = file->bcdDevice >> 8;
+ dfusuffix[2] = file->idProduct & 0xff;
+ dfusuffix[3] = file->idProduct >> 8;
+ dfusuffix[4] = file->idVendor & 0xff;
+ dfusuffix[5] = file->idVendor >> 8;
+ dfusuffix[6] = file->bcdDFU & 0xff;
+ dfusuffix[7] = file->bcdDFU >> 8;
+ dfusuffix[8] = 'U';
+ dfusuffix[9] = 'F';
+ dfusuffix[10] = 'D';
+ dfusuffix[11] = DFU_SUFFIX_LENGTH;
+
+ crc = dfu_file_write_crc(f, crc, dfusuffix,
+ DFU_SUFFIX_LENGTH - 4);
+
+ dfusuffix[12] = crc;
+ dfusuffix[13] = crc >> 8;
+ dfusuffix[14] = crc >> 16;
+ dfusuffix[15] = crc >> 24;
+
+ crc = dfu_file_write_crc(f, crc, dfusuffix + 12, 4);
+ }
+ close(f);
+}
+
+void show_suffix_and_prefix(struct dfu_file *file)
+{
+ if (file->size.prefix == LMDFU_PREFIX_LENGTH) {
+ printf("The file %s contains a TI Stellaris DFU prefix with the following properties:\n", file->name);
+ printf("Address:\t0x%08x\n", file->lmdfu_address);
+ } else if (file->size.prefix == LPCDFU_PREFIX_LENGTH) {
+ uint8_t * prefix = file->firmware;
+ printf("The file %s contains a NXP unencrypted LPC DFU prefix with the following properties:\n", file->name);
+ printf("Size:\t%5d kiB\n", prefix[2]>>1|prefix[3]<<7);
+ } else if (file->size.prefix != 0) {
+ printf("The file %s contains an unknown prefix\n", file->name);
+ }
+ if (file->size.suffix > 0) {
+ printf("The file %s contains a DFU suffix with the following properties:\n", file->name);
+ printf("BCD device:\t0x%04X\n", file->bcdDevice);
+ printf("Product ID:\t0x%04X\n",file->idProduct);
+ printf("Vendor ID:\t0x%04X\n", file->idVendor);
+ printf("BCD DFU:\t0x%04X\n", file->bcdDFU);
+ printf("Length:\t\t%i\n", file->size.suffix);
+ printf("CRC:\t\t0x%08X\n", file->dwCRC);
+ }
+}
--- /dev/null
+
+#ifndef DFU_FILE_H
+#define DFU_FILE_H
+
+#include <stdint.h>
+
+struct dfu_file {
+ /* File name */
+ const char *name;
+ /* Pointer to file loaded into memory */
+ uint8_t *firmware;
+ /* Different sizes */
+ struct {
+ int total;
+ int prefix;
+ int suffix;
+ } size;
+ /* From prefix fields */
+ uint32_t lmdfu_address;
+ /* From prefix fields */
+ uint32_t prefix_type;
+
+ /* From DFU suffix fields */
+ uint32_t dwCRC;
+ uint16_t bcdDFU;
+ uint16_t idVendor;
+ uint16_t idProduct;
+ uint16_t bcdDevice;
+};
+
+enum suffix_req {
+ NO_SUFFIX,
+ NEEDS_SUFFIX,
+ MAYBE_SUFFIX
+};
+
+enum prefix_req {
+ NO_PREFIX,
+ NEEDS_PREFIX,
+ MAYBE_PREFIX
+};
+
+enum prefix_type {
+ ZERO_PREFIX,
+ LMDFU_PREFIX,
+ LPCDFU_UNENCRYPTED_PREFIX
+};
+
+extern int verbose;
+
+void dfu_load_file(struct dfu_file *file, enum suffix_req check_suffix, enum prefix_req check_prefix);
+void dfu_store_file(struct dfu_file *file, int write_suffix, int write_prefix);
+
+void dfu_progress_bar(const char *desc, unsigned long long curr,
+ unsigned long long max);
+void *dfu_malloc(size_t size);
+uint32_t dfu_file_write_crc(int f, uint32_t crc, const void *buf, int size);
+void show_suffix_and_prefix(struct dfu_file *file);
+
+#endif /* DFU_FILE_H */
--- /dev/null
+/*
+ * DFU transfer routines
+ *
+ * This is supposed to be a general DFU implementation, as specified in the
+ * USB DFU 1.0 and 1.1 specification.
+ *
+ * The code was originally intended to interface with a USB device running the
+ * "sam7dfu" firmware (see http://www.openpcd.org/) on an AT91SAM7 processor.
+ *
+ * Copyright 2007-2008 Harald Welte <laforge@gnumonks.org>
+ * Copyright 2013 Hans Petter Selasky <hps@bitfrost.no>
+ * Copyright 2014 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#include <libusb.h>
+
+#include "portable.h"
+#include "dfu.h"
+#include "usb_dfu.h"
+#include "dfu_file.h"
+#include "dfu_load.h"
+#include "quirks.h"
+
+int dfuload_do_upload(struct dfu_if *dif, int xfer_size,
+ int expected_size, int fd)
+{
+ int total_bytes = 0;
+ unsigned short transaction = 0;
+ unsigned char *buf;
+ int ret;
+
+ buf = dfu_malloc(xfer_size);
+
+ printf("Copying data from DFU device to PC\n");
+
+ while (1) {
+ int rc;
+ dfu_progress_bar("Upload", total_bytes, expected_size);
+ rc = dfu_upload(dif->dev_handle, dif->interface,
+ xfer_size, transaction++, buf);
+ if (rc < 0) {
+ warnx("\nError during upload");
+ ret = rc;
+ break;
+ }
+
+ dfu_file_write_crc(fd, 0, buf, rc);
+ total_bytes += rc;
+
+ if (total_bytes < 0)
+ errx(EX_SOFTWARE, "\nReceived too many bytes (wraparound)");
+
+ if (rc < xfer_size) {
+ /* last block, return */
+ ret = 0;
+ break;
+ }
+ }
+ free(buf);
+ if (ret == 0) {
+ dfu_progress_bar("Upload", total_bytes, total_bytes);
+ } else {
+ dfu_progress_bar("Upload", total_bytes, expected_size);
+ printf("\n");
+ }
+ if (total_bytes == 0)
+ printf("\nFailed.\n");
+ if (verbose)
+ printf("Received a total of %i bytes\n", total_bytes);
+ if (expected_size != 0 && total_bytes != expected_size)
+ errx(EX_SOFTWARE, "Unexpected number of bytes uploaded from device");
+ return ret;
+}
+
+int dfuload_do_dnload(struct dfu_if *dif, int xfer_size, struct dfu_file *file)
+{
+ int bytes_sent;
+ int expected_size;
+ unsigned char *buf;
+ unsigned short transaction = 0;
+ struct dfu_status dst;
+ int ret;
+
+ printf("Copying data from PC to DFU device\n");
+
+ buf = file->firmware;
+ expected_size = file->size.total - file->size.suffix;
+ bytes_sent = 0;
+
+ dfu_progress_bar("Download", 0, 1);
+ while (bytes_sent < expected_size) {
+ int bytes_left;
+ int chunk_size;
+
+ bytes_left = expected_size - bytes_sent;
+ if (bytes_left < xfer_size)
+ chunk_size = bytes_left;
+ else
+ chunk_size = xfer_size;
+
+ ret = dfu_download(dif->dev_handle, dif->interface,
+ chunk_size, transaction++, chunk_size ? buf : NULL);
+ if (ret < 0) {
+ warnx("Error during download");
+ goto out;
+ }
+ bytes_sent += chunk_size;
+ buf += chunk_size;
+
+ do {
+ ret = dfu_get_status(dif, &dst);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during download get_status");
+ goto out;
+ }
+
+ if (dst.bState == DFU_STATE_dfuDNLOAD_IDLE ||
+ dst.bState == DFU_STATE_dfuERROR)
+ break;
+
+ /* Wait while device executes flashing */
+ milli_sleep(dst.bwPollTimeout);
+
+ } while (1);
+ if (dst.bStatus != DFU_STATUS_OK) {
+ printf(" failed!\n");
+ printf("state(%u) = %s, status(%u) = %s\n", dst.bState,
+ dfu_state_to_string(dst.bState), dst.bStatus,
+ dfu_status_to_string(dst.bStatus));
+ ret = -1;
+ goto out;
+ }
+ dfu_progress_bar("Download", bytes_sent, bytes_sent + bytes_left);
+ }
+
+ /* send one zero sized download request to signalize end */
+ ret = dfu_download(dif->dev_handle, dif->interface,
+ 0, transaction, NULL);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error sending completion packet");
+ goto out;
+ }
+
+ dfu_progress_bar("Download", bytes_sent, bytes_sent);
+
+ if (verbose)
+ printf("Sent a total of %i bytes\n", bytes_sent);
+
+get_status:
+ /* Transition to MANIFEST_SYNC state */
+ ret = dfu_get_status(dif, &dst);
+ if (ret < 0) {
+ warnx("unable to read DFU status after completion");
+ goto out;
+ }
+ printf("state(%u) = %s, status(%u) = %s\n", dst.bState,
+ dfu_state_to_string(dst.bState), dst.bStatus,
+ dfu_status_to_string(dst.bStatus));
+
+ milli_sleep(dst.bwPollTimeout);
+
+ /* FIXME: deal correctly with ManifestationTolerant=0 / WillDetach bits */
+ switch (dst.bState) {
+ case DFU_STATE_dfuMANIFEST_SYNC:
+ case DFU_STATE_dfuMANIFEST:
+ /* some devices (e.g. TAS1020b) need some time before we
+ * can obtain the status */
+ milli_sleep(1000);
+ goto get_status;
+ break;
+ case DFU_STATE_dfuIDLE:
+ break;
+ }
+ printf("Done!\n");
+
+out:
+ return bytes_sent;
+}
--- /dev/null
+#ifndef DFU_LOAD_H
+#define DFU_LOAD_H
+
+int dfuload_do_upload(struct dfu_if *dif, int xfer_size, int expected_size, int fd);
+int dfuload_do_dnload(struct dfu_if *dif, int xfer_size, struct dfu_file *file);
+
+#endif /* DFU_LOAD_H */
--- /dev/null
+/*
+ * Functions for detecting DFU USB entities
+ *
+ * Written by Harald Welte <laforge@openmoko.org>
+ * Copyright 2007-2008 by OpenMoko, Inc.
+ * Copyright 2013 Hans Petter Selasky <hps@bitfrost.no>
+ * Copyright 2016 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * Based on existing code of dfu-programmer-0.4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <libusb.h>
+
+#include "portable.h"
+#include "dfu.h"
+#include "usb_dfu.h"
+#include "dfu_file.h"
+#include "dfu_load.h"
+#include "dfu_util.h"
+#include "dfuse.h"
+#include "quirks.h"
+
+/*
+ * Look for a descriptor in a concatenated descriptor list. Will
+ * return upon the first match of the given descriptor type. Returns length of
+ * found descriptor, limited to res_size
+ */
+static int find_descriptor(const uint8_t *desc_list, int list_len,
+ uint8_t desc_type, void *res_buf, int res_size)
+{
+ int p = 0;
+
+ if (list_len < 2)
+ return (-1);
+
+ while (p + 1 < list_len) {
+ int desclen;
+
+ desclen = (int) desc_list[p];
+ if (desclen == 0) {
+ warnx("Invalid descriptor list");
+ return -1;
+ }
+ if (desc_list[p + 1] == desc_type) {
+ if (desclen > res_size)
+ desclen = res_size;
+ if (p + desclen > list_len)
+ desclen = list_len - p;
+ memcpy(res_buf, &desc_list[p], desclen);
+ return desclen;
+ }
+ p += (int) desc_list[p];
+ }
+ return -1;
+}
+
+/*
+ * Similar to libusb_get_string_descriptor_ascii but will allow
+ * truncated descriptors (descriptor length mismatch) seen on
+ * e.g. the STM32F427 ROM bootloader.
+ */
+static int get_string_descriptor_ascii(libusb_device_handle *devh,
+ uint8_t desc_index, unsigned char *data, int length)
+{
+ unsigned char tbuf[255];
+ uint16_t langid;
+ int r, di, si;
+
+ /* get the language IDs and pick the first one */
+ r = libusb_get_string_descriptor(devh, 0, 0, tbuf, sizeof(tbuf));
+ if (r < 0) {
+ warnx("Failed to retrieve language identifiers");
+ return r;
+ }
+ if (r < 4 || tbuf[0] < 4 || tbuf[1] != LIBUSB_DT_STRING) { /* must have at least one ID */
+ warnx("Broken LANGID string descriptor");
+ return -1;
+ }
+ langid = tbuf[2] | (tbuf[3] << 8);
+
+ r = libusb_get_string_descriptor(devh, desc_index, langid, tbuf,
+ sizeof(tbuf));
+ if (r < 0) {
+ warnx("Failed to retrieve string descriptor %d", desc_index);
+ return r;
+ }
+ if (tbuf[1] != LIBUSB_DT_STRING) { /* sanity check */
+ warnx("Malformed string descriptor %d, type = 0x%02x", desc_index, tbuf[1]);
+ return -1;
+ }
+ if (tbuf[0] > r) { /* if short read, */
+ warnx("Patching string descriptor %d length (was %d, received %d)", desc_index, tbuf[0], r);
+ tbuf[0] = r; /* fix up descriptor length */
+ }
+
+ /* convert from 16-bit unicode to ascii string */
+ for (di = 0, si = 2; si + 1 < tbuf[0] && di < length; si += 2) {
+ if (tbuf[si + 1]) /* high byte of unicode char */
+ data[di++] = '?';
+ else
+ data[di++] = tbuf[si];
+ }
+ data[di] = 0;
+ return di;
+}
+
+static void probe_configuration(libusb_device *dev, struct libusb_device_descriptor *desc)
+{
+ struct usb_dfu_func_descriptor func_dfu;
+ libusb_device_handle *devh;
+ struct dfu_if *pdfu;
+ struct libusb_config_descriptor *cfg;
+ const struct libusb_interface_descriptor *intf;
+ const struct libusb_interface *uif;
+ char alt_name[MAX_DESC_STR_LEN + 1];
+ char serial_name[MAX_DESC_STR_LEN + 1];
+ int cfg_idx;
+ int intf_idx;
+ int alt_idx;
+ int ret;
+ int has_dfu;
+
+ for (cfg_idx = 0; cfg_idx != desc->bNumConfigurations; cfg_idx++) {
+ memset(&func_dfu, 0, sizeof(func_dfu));
+ has_dfu = 0;
+
+ ret = libusb_get_config_descriptor(dev, cfg_idx, &cfg);
+ if (ret != 0)
+ return;
+ if (match_config_index > -1 && match_config_index != cfg->bConfigurationValue) {
+ libusb_free_config_descriptor(cfg);
+ continue;
+ }
+
+ /*
+ * In some cases, noticably FreeBSD if uid != 0,
+ * the configuration descriptors are empty
+ */
+ if (!cfg)
+ return;
+
+ ret = find_descriptor(cfg->extra, cfg->extra_length,
+ USB_DT_DFU, &func_dfu, sizeof(func_dfu));
+ if (ret > -1)
+ goto found_dfu;
+
+ for (intf_idx = 0; intf_idx < cfg->bNumInterfaces;
+ intf_idx++) {
+ uif = &cfg->interface[intf_idx];
+ if (!uif)
+ break;
+
+ for (alt_idx = 0; alt_idx < cfg->interface[intf_idx].num_altsetting;
+ alt_idx++) {
+ intf = &uif->altsetting[alt_idx];
+
+ if (intf->bInterfaceClass != 0xfe ||
+ intf->bInterfaceSubClass != 1)
+ continue;
+
+ ret = find_descriptor(intf->extra, intf->extra_length, USB_DT_DFU,
+ &func_dfu, sizeof(func_dfu));
+ if (ret > -1)
+ goto found_dfu;
+
+ has_dfu = 1;
+ }
+ }
+ if (has_dfu) {
+ /*
+ * Finally try to retrieve it requesting the
+ * device directly This is not supported on
+ * all devices for non-standard types
+ */
+ if (libusb_open(dev, &devh) == 0) {
+ ret = libusb_get_descriptor(devh, USB_DT_DFU, 0,
+ (void *)&func_dfu, sizeof(func_dfu));
+ libusb_close(devh);
+ if (ret > -1)
+ goto found_dfu;
+ }
+ warnx("Device has DFU interface, "
+ "but has no DFU functional descriptor");
+
+ /* fake version 1.0 */
+ func_dfu.bLength = 7;
+ func_dfu.bcdDFUVersion = libusb_cpu_to_le16(0x0100);
+ goto found_dfu;
+ }
+ libusb_free_config_descriptor(cfg);
+ continue;
+
+found_dfu:
+ if (func_dfu.bLength == 7) {
+ printf("Deducing device DFU version from functional descriptor "
+ "length\n");
+ func_dfu.bcdDFUVersion = libusb_cpu_to_le16(0x0100);
+ } else if (func_dfu.bLength < 9) {
+ printf("Error obtaining DFU functional descriptor\n");
+ printf("Please report this as a bug!\n");
+ printf("Warning: Assuming DFU version 1.0\n");
+ func_dfu.bcdDFUVersion = libusb_cpu_to_le16(0x0100);
+ printf("Warning: Transfer size can not be detected\n");
+ func_dfu.wTransferSize = 0;
+ }
+
+ for (intf_idx = 0; intf_idx < cfg->bNumInterfaces;
+ intf_idx++) {
+ if (match_iface_index > -1 && match_iface_index != intf_idx)
+ continue;
+
+ uif = &cfg->interface[intf_idx];
+ if (!uif)
+ break;
+
+ for (alt_idx = 0;
+ alt_idx < uif->num_altsetting; alt_idx++) {
+ int dfu_mode;
+
+ intf = &uif->altsetting[alt_idx];
+
+ if (intf->bInterfaceClass != 0xfe ||
+ intf->bInterfaceSubClass != 1)
+ continue;
+
+ dfu_mode = (intf->bInterfaceProtocol == 2);
+ /* e.g. DSO Nano has bInterfaceProtocol 0 instead of 2 */
+ if (func_dfu.bcdDFUVersion == 0x011a && intf->bInterfaceProtocol == 0)
+ dfu_mode = 1;
+
+ /* LPC DFU bootloader has bInterfaceProtocol 1 (Runtime) instead of 2 */
+ if (desc->idVendor == 0x1fc9 && desc->idProduct == 0x000c && intf->bInterfaceProtocol == 1)
+ dfu_mode = 1;
+
+ if (dfu_mode &&
+ match_iface_alt_index > -1 && match_iface_alt_index != alt_idx)
+ continue;
+
+ if (dfu_mode) {
+ if ((match_vendor_dfu >= 0 && match_vendor_dfu != desc->idVendor) ||
+ (match_product_dfu >= 0 && match_product_dfu != desc->idProduct)) {
+ continue;
+ }
+ } else {
+ if ((match_vendor >= 0 && match_vendor != desc->idVendor) ||
+ (match_product >= 0 && match_product != desc->idProduct)) {
+ continue;
+ }
+ }
+
+ if (libusb_open(dev, &devh)) {
+ warnx("Cannot open DFU device %04x:%04x", desc->idVendor, desc->idProduct);
+ break;
+ }
+ if (intf->iInterface != 0)
+ ret = get_string_descriptor_ascii(devh,
+ intf->iInterface, (void *)alt_name, MAX_DESC_STR_LEN);
+ else
+ ret = -1;
+ if (ret < 1)
+ strcpy(alt_name, "UNKNOWN");
+ if (desc->iSerialNumber != 0)
+ ret = get_string_descriptor_ascii(devh,
+ desc->iSerialNumber, (void *)serial_name, MAX_DESC_STR_LEN);
+ else
+ ret = -1;
+ if (ret < 1)
+ strcpy(serial_name, "UNKNOWN");
+ libusb_close(devh);
+
+ if (dfu_mode &&
+ match_iface_alt_name != NULL && strcmp(alt_name, match_iface_alt_name))
+ continue;
+
+ if (dfu_mode) {
+ if (match_serial_dfu != NULL && strcmp(match_serial_dfu, serial_name))
+ continue;
+ } else {
+ if (match_serial != NULL && strcmp(match_serial, serial_name))
+ continue;
+ }
+
+ pdfu = dfu_malloc(sizeof(*pdfu));
+
+ memset(pdfu, 0, sizeof(*pdfu));
+
+ pdfu->func_dfu = func_dfu;
+ pdfu->dev = libusb_ref_device(dev);
+ pdfu->quirks = get_quirks(desc->idVendor,
+ desc->idProduct, desc->bcdDevice);
+ pdfu->vendor = desc->idVendor;
+ pdfu->product = desc->idProduct;
+ pdfu->bcdDevice = desc->bcdDevice;
+ pdfu->configuration = cfg->bConfigurationValue;
+ pdfu->interface = intf->bInterfaceNumber;
+ pdfu->altsetting = intf->bAlternateSetting;
+ pdfu->devnum = libusb_get_device_address(dev);
+ pdfu->busnum = libusb_get_bus_number(dev);
+ pdfu->alt_name = strdup(alt_name);
+ if (pdfu->alt_name == NULL)
+ errx(EX_SOFTWARE, "Out of memory");
+ pdfu->serial_name = strdup(serial_name);
+ if (pdfu->serial_name == NULL)
+ errx(EX_SOFTWARE, "Out of memory");
+ if (dfu_mode)
+ pdfu->flags |= DFU_IFF_DFU;
+ if (pdfu->quirks & QUIRK_FORCE_DFU11) {
+ pdfu->func_dfu.bcdDFUVersion =
+ libusb_cpu_to_le16(0x0110);
+ }
+ pdfu->bMaxPacketSize0 = desc->bMaxPacketSize0;
+
+ /* queue into list */
+ pdfu->next = dfu_root;
+ dfu_root = pdfu;
+ }
+ }
+ libusb_free_config_descriptor(cfg);
+ }
+}
+
+#define MAX_PATH_LEN 20
+char path_buf[MAX_PATH_LEN];
+
+char *get_path(libusb_device *dev)
+{
+#if (defined(LIBUSB_API_VERSION) && LIBUSB_API_VERSION >= 0x01000102) || (defined(LIBUSBX_API_VERSION) && LIBUSBX_API_VERSION >= 0x01000102)
+ uint8_t path[8];
+ int r,j;
+ r = libusb_get_port_numbers(dev, path, sizeof(path));
+ if (r > 0) {
+ sprintf(path_buf,"%d-%d",libusb_get_bus_number(dev),path[0]);
+ for (j = 1; j < r; j++){
+ sprintf(path_buf+strlen(path_buf),".%d",path[j]);
+ };
+ }
+ return path_buf;
+#else
+# warning "libusb too old - building without USB path support!"
+ return NULL;
+#endif
+}
+
+void probe_devices(libusb_context *ctx)
+{
+ libusb_device **list;
+ ssize_t num_devs;
+ ssize_t i;
+
+ num_devs = libusb_get_device_list(ctx, &list);
+ for (i = 0; i < num_devs; ++i) {
+ struct libusb_device_descriptor desc;
+ struct libusb_device *dev = list[i];
+
+ if (match_path != NULL && strcmp(get_path(dev),match_path) != 0)
+ continue;
+ if (libusb_get_device_descriptor(dev, &desc))
+ continue;
+ probe_configuration(dev, &desc);
+ }
+ libusb_free_device_list(list, 0);
+}
+
+void disconnect_devices(void)
+{
+ struct dfu_if *pdfu;
+ struct dfu_if *prev = NULL;
+
+ for (pdfu = dfu_root; pdfu != NULL; pdfu = pdfu->next) {
+ free(prev);
+ libusb_unref_device(pdfu->dev);
+ free(pdfu->alt_name);
+ free(pdfu->serial_name);
+ prev = pdfu;
+ }
+ free(prev);
+ dfu_root = NULL;
+}
+
+void print_dfu_if(struct dfu_if *dfu_if)
+{
+ printf("Found %s: [%04x:%04x] ver=%04x, devnum=%u, cfg=%u, intf=%u, "
+ "path=\"%s\", alt=%u, name=\"%s\", serial=\"%s\"\n",
+ dfu_if->flags & DFU_IFF_DFU ? "DFU" : "Runtime",
+ dfu_if->vendor, dfu_if->product,
+ dfu_if->bcdDevice, dfu_if->devnum,
+ dfu_if->configuration, dfu_if->interface,
+ get_path(dfu_if->dev),
+ dfu_if->altsetting, dfu_if->alt_name,
+ dfu_if->serial_name);
+}
+
+/* Walk the device tree and print out DFU devices */
+void list_dfu_interfaces(void)
+{
+ struct dfu_if *pdfu;
+
+ for (pdfu = dfu_root; pdfu != NULL; pdfu = pdfu->next)
+ print_dfu_if(pdfu);
+}
--- /dev/null
+#ifndef DFU_UTIL_H
+#define DFU_UTIL_H
+
+/* USB string descriptor should contain max 126 UTF-16 characters
+ * but 253 would even accomodate any UTF-8 encoding */
+#define MAX_DESC_STR_LEN 253
+
+enum mode {
+ MODE_NONE,
+ MODE_VERSION,
+ MODE_LIST,
+ MODE_DETACH,
+ MODE_UPLOAD,
+ MODE_DOWNLOAD
+};
+
+extern struct dfu_if *dfu_root;
+extern char *match_path;
+extern int match_vendor;
+extern int match_product;
+extern int match_vendor_dfu;
+extern int match_product_dfu;
+extern int match_config_index;
+extern int match_iface_index;
+extern int match_iface_alt_index;
+extern const char *match_iface_alt_name;
+extern const char *match_serial;
+extern const char *match_serial_dfu;
+
+void probe_devices(libusb_context *);
+void disconnect_devices(void);
+void print_dfu_if(struct dfu_if *);
+void list_dfu_interfaces(void);
+
+#endif /* DFU_UTIL_H */
--- /dev/null
+/*
+ * DfuSe specific functions
+ *
+ * This implements the ST Microsystems DFU extensions (DfuSe)
+ * as per the DfuSe 1.1a specification (ST documents AN3156, AN2606)
+ * The DfuSe file format is described in ST document UM0391.
+ *
+ * Copyright 2010-2016 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#include "portable.h"
+#include "dfu.h"
+#include "usb_dfu.h"
+#include "dfu_file.h"
+#include "dfuse.h"
+#include "dfuse_mem.h"
+
+#define DFU_TIMEOUT 5000
+
+extern int verbose;
+static unsigned int last_erased_page = 1; /* non-aligned value, won't match */
+static struct memsegment *mem_layout;
+static unsigned int dfuse_address = 0;
+static unsigned int dfuse_length = 0;
+static int dfuse_force = 0;
+static int dfuse_leave = 0;
+static int dfuse_unprotect = 0;
+static int dfuse_mass_erase = 0;
+
+unsigned int quad2uint(unsigned char *p)
+{
+ return (*p + (*(p + 1) << 8) + (*(p + 2) << 16) + (*(p + 3) << 24));
+}
+
+void dfuse_parse_options(const char *options)
+{
+ char *end;
+ const char *endword;
+ unsigned int number;
+
+ /* address, possibly empty, must be first */
+ if (*options != ':') {
+ endword = strchr(options, ':');
+ if (!endword)
+ endword = options + strlen(options); /* GNU strchrnul */
+
+ number = strtoul(options, &end, 0);
+ if (end == endword) {
+ dfuse_address = number;
+ } else {
+ errx(EX_IOERR, "Invalid dfuse address: %s", options);
+ }
+ options = endword;
+ }
+
+ while (*options) {
+ if (*options == ':') {
+ options++;
+ continue;
+ }
+ endword = strchr(options, ':');
+ if (!endword)
+ endword = options + strlen(options);
+
+ if (!strncmp(options, "force", endword - options)) {
+ dfuse_force++;
+ options += 5;
+ continue;
+ }
+ if (!strncmp(options, "leave", endword - options)) {
+ dfuse_leave = 1;
+ options += 5;
+ continue;
+ }
+ if (!strncmp(options, "unprotect", endword - options)) {
+ dfuse_unprotect = 1;
+ options += 9;
+ continue;
+ }
+ if (!strncmp(options, "mass-erase", endword - options)) {
+ dfuse_mass_erase = 1;
+ options += 10;
+ continue;
+ }
+
+ /* any valid number is interpreted as upload length */
+ number = strtoul(options, &end, 0);
+ if (end == endword) {
+ dfuse_length = number;
+ } else {
+ errx(EX_IOERR, "Invalid dfuse modifier: %s", options);
+ }
+ options = endword;
+ }
+}
+
+/* DFU_UPLOAD request for DfuSe 1.1a */
+int dfuse_upload(struct dfu_if *dif, const unsigned short length,
+ unsigned char *data, unsigned short transaction)
+{
+ int status;
+
+ status = libusb_control_transfer(dif->dev_handle,
+ /* bmRequestType */ LIBUSB_ENDPOINT_IN |
+ LIBUSB_REQUEST_TYPE_CLASS |
+ LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_UPLOAD,
+ /* wValue */ transaction,
+ /* wIndex */ dif->interface,
+ /* Data */ data,
+ /* wLength */ length,
+ DFU_TIMEOUT);
+ if (status < 0) {
+ errx(EX_IOERR, "%s: libusb_control_msg returned %d",
+ __FUNCTION__, status);
+ }
+ return status;
+}
+
+/* DFU_DNLOAD request for DfuSe 1.1a */
+int dfuse_download(struct dfu_if *dif, const unsigned short length,
+ unsigned char *data, unsigned short transaction)
+{
+ int status;
+
+ status = libusb_control_transfer(dif->dev_handle,
+ /* bmRequestType */ LIBUSB_ENDPOINT_OUT |
+ LIBUSB_REQUEST_TYPE_CLASS |
+ LIBUSB_RECIPIENT_INTERFACE,
+ /* bRequest */ DFU_DNLOAD,
+ /* wValue */ transaction,
+ /* wIndex */ dif->interface,
+ /* Data */ data,
+ /* wLength */ length,
+ DFU_TIMEOUT);
+ if (status < 0) {
+ errx(EX_IOERR, "%s: libusb_control_transfer returned %d",
+ __FUNCTION__, status);
+ }
+ return status;
+}
+
+/* DfuSe only commands */
+/* Leaves the device in dfuDNLOAD-IDLE state */
+int dfuse_special_command(struct dfu_if *dif, unsigned int address,
+ enum dfuse_command command)
+{
+ const char* dfuse_command_name[] = { "SET_ADDRESS" , "ERASE_PAGE",
+ "MASS_ERASE", "READ_UNPROTECT"};
+ unsigned char buf[5];
+ int length;
+ int ret;
+ struct dfu_status dst;
+ int firstpoll = 1;
+
+ if (command == ERASE_PAGE) {
+ struct memsegment *segment;
+ int page_size;
+
+ segment = find_segment(mem_layout, address);
+ if (!segment || !(segment->memtype & DFUSE_ERASABLE)) {
+ errx(EX_IOERR, "Page at 0x%08x can not be erased",
+ address);
+ }
+ page_size = segment->pagesize;
+ if (verbose > 1)
+ printf("Erasing page size %i at address 0x%08x, page "
+ "starting at 0x%08x\n", page_size, address,
+ address & ~(page_size - 1));
+ buf[0] = 0x41; /* Erase command */
+ length = 5;
+ last_erased_page = address & ~(page_size - 1);
+ } else if (command == SET_ADDRESS) {
+ if (verbose > 2)
+ printf(" Setting address pointer to 0x%08x\n",
+ address);
+ buf[0] = 0x21; /* Set Address Pointer command */
+ length = 5;
+ } else if (command == MASS_ERASE) {
+ buf[0] = 0x41; /* Mass erase command when length = 1 */
+ length = 1;
+ } else if (command == READ_UNPROTECT) {
+ buf[0] = 0x92;
+ length = 1;
+ } else {
+ errx(EX_IOERR, "Non-supported special command %d", command);
+ }
+ buf[1] = address & 0xff;
+ buf[2] = (address >> 8) & 0xff;
+ buf[3] = (address >> 16) & 0xff;
+ buf[4] = (address >> 24) & 0xff;
+
+ ret = dfuse_download(dif, length, buf, 0);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during special command \"%s\" download",
+ dfuse_command_name[command]);
+ }
+ do {
+ ret = dfu_get_status(dif, &dst);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during special command \"%s\" get_status",
+ dfuse_command_name[command]);
+ }
+ if (firstpoll) {
+ firstpoll = 0;
+ if (dst.bState != DFU_STATE_dfuDNBUSY) {
+ printf("state(%u) = %s, status(%u) = %s\n", dst.bState,
+ dfu_state_to_string(dst.bState), dst.bStatus,
+ dfu_status_to_string(dst.bStatus));
+ errx(EX_IOERR, "Wrong state after command \"%s\" download",
+ dfuse_command_name[command]);
+ }
+ /* STM32F405 lies about mass erase timeout */
+ if (command == MASS_ERASE && dst.bwPollTimeout == 100) {
+ dst.bwPollTimeout = 35000;
+ printf("Setting timeout to 35 seconds\n");
+ }
+ }
+ /* wait while command is executed */
+ if (verbose)
+ printf(" Poll timeout %i ms\n", dst.bwPollTimeout);
+ milli_sleep(dst.bwPollTimeout);
+ if (command == READ_UNPROTECT)
+ return ret;
+ } while (dst.bState == DFU_STATE_dfuDNBUSY);
+
+ if (dst.bStatus != DFU_STATUS_OK) {
+ errx(EX_IOERR, "%s not correctly executed",
+ dfuse_command_name[command]);
+ }
+ return ret;
+}
+
+int dfuse_dnload_chunk(struct dfu_if *dif, unsigned char *data, int size,
+ int transaction)
+{
+ int bytes_sent;
+ struct dfu_status dst;
+ int ret;
+
+ ret = dfuse_download(dif, size, size ? data : NULL, transaction);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during download");
+ return ret;
+ }
+ bytes_sent = ret;
+
+ do {
+ ret = dfu_get_status(dif, &dst);
+ if (ret < 0) {
+ errx(EX_IOERR, "Error during download get_status");
+ return ret;
+ }
+ milli_sleep(dst.bwPollTimeout);
+ } while (dst.bState != DFU_STATE_dfuDNLOAD_IDLE &&
+ dst.bState != DFU_STATE_dfuERROR &&
+ dst.bState != DFU_STATE_dfuMANIFEST);
+
+ if (dst.bState == DFU_STATE_dfuMANIFEST)
+ printf("Transitioning to dfuMANIFEST state\n");
+
+ if (dst.bStatus != DFU_STATUS_OK) {
+ printf(" failed!\n");
+ printf("state(%u) = %s, status(%u) = %s\n", dst.bState,
+ dfu_state_to_string(dst.bState), dst.bStatus,
+ dfu_status_to_string(dst.bStatus));
+ return -1;
+ }
+ return bytes_sent;
+}
+
+int dfuse_do_upload(struct dfu_if *dif, int xfer_size, int fd,
+ const char *dfuse_options)
+{
+ int total_bytes = 0;
+ int upload_limit = 0;
+ unsigned char *buf;
+ int transaction;
+ int ret;
+
+ buf = dfu_malloc(xfer_size);
+
+ if (dfuse_options)
+ dfuse_parse_options(dfuse_options);
+ if (dfuse_length)
+ upload_limit = dfuse_length;
+ if (dfuse_address) {
+ struct memsegment *segment;
+
+ mem_layout = parse_memory_layout((char *)dif->alt_name);
+ if (!mem_layout)
+ errx(EX_IOERR, "Failed to parse memory layout");
+
+ segment = find_segment(mem_layout, dfuse_address);
+ if (!dfuse_force &&
+ (!segment || !(segment->memtype & DFUSE_READABLE)))
+ errx(EX_IOERR, "Page at 0x%08x is not readable",
+ dfuse_address);
+
+ if (!upload_limit) {
+ upload_limit = segment->end - dfuse_address + 1;
+ printf("Limiting upload to end of memory segment, "
+ "%i bytes\n", upload_limit);
+ }
+ dfuse_special_command(dif, dfuse_address, SET_ADDRESS);
+ dfu_abort_to_idle(dif);
+ } else {
+ /* Boot loader decides the start address, unknown to us */
+ /* Use a short length to lower risk of running out of bounds */
+ if (!upload_limit)
+ upload_limit = 0x4000;
+ printf("Limiting default upload to %i bytes\n", upload_limit);
+ }
+
+ dfu_progress_bar("Upload", 0, 1);
+
+ transaction = 2;
+ while (1) {
+ int rc;
+
+ /* last chunk can be smaller than original xfer_size */
+ if (upload_limit - total_bytes < xfer_size)
+ xfer_size = upload_limit - total_bytes;
+ rc = dfuse_upload(dif, xfer_size, buf, transaction++);
+ if (rc < 0) {
+ ret = rc;
+ goto out_free;
+ }
+
+ dfu_file_write_crc(fd, 0, buf, rc);
+ total_bytes += rc;
+
+ if (total_bytes < 0)
+ errx(EX_SOFTWARE, "Received too many bytes");
+
+ if (rc < xfer_size || total_bytes >= upload_limit) {
+ /* last block, return successfully */
+ ret = total_bytes;
+ break;
+ }
+ dfu_progress_bar("Upload", total_bytes, upload_limit);
+ }
+
+ dfu_progress_bar("Upload", total_bytes, total_bytes);
+
+ dfu_abort_to_idle(dif);
+ if (dfuse_leave) {
+ dfuse_special_command(dif, dfuse_address, SET_ADDRESS);
+ dfuse_dnload_chunk(dif, NULL, 0, 2); /* Zero-size */
+ }
+
+ out_free:
+ free(buf);
+
+ return ret;
+}
+
+/* Writes an element of any size to the device, taking care of page erases */
+/* returns 0 on success, otherwise -EINVAL */
+int dfuse_dnload_element(struct dfu_if *dif, unsigned int dwElementAddress,
+ unsigned int dwElementSize, unsigned char *data,
+ int xfer_size)
+{
+ int p;
+ int ret;
+ struct memsegment *segment;
+
+ /* Check at least that we can write to the last address */
+ segment =
+ find_segment(mem_layout, dwElementAddress + dwElementSize - 1);
+ if (!segment || !(segment->memtype & DFUSE_WRITEABLE)) {
+ errx(EX_IOERR, "Last page at 0x%08x is not writeable",
+ dwElementAddress + dwElementSize - 1);
+ }
+
+ dfu_progress_bar("Download", 0, 1);
+
+ /* First pass: Erase involved pages if needed */
+ for (p = 0; p < (int)dwElementSize; p += xfer_size) {
+ int page_size;
+ unsigned int erase_address;
+ unsigned int address = dwElementAddress + p;
+ int chunk_size = xfer_size;
+
+ segment = find_segment(mem_layout, address);
+ if (!segment || !(segment->memtype & DFUSE_WRITEABLE)) {
+ errx(EX_IOERR, "Page at 0x%08x is not writeable",
+ address);
+ }
+ page_size = segment->pagesize;
+
+ /* check if this is the last chunk */
+ if (p + chunk_size > (int)dwElementSize)
+ chunk_size = dwElementSize - p;
+
+ /* Erase only for flash memory downloads */
+ if ((segment->memtype & DFUSE_ERASABLE) && !dfuse_mass_erase) {
+ /* erase all involved pages */
+ for (erase_address = address;
+ erase_address < address + chunk_size;
+ erase_address += page_size)
+ if ((erase_address & ~(page_size - 1)) !=
+ last_erased_page)
+ dfuse_special_command(dif,
+ erase_address,
+ ERASE_PAGE);
+
+ if (((address + chunk_size - 1) & ~(page_size - 1)) !=
+ last_erased_page) {
+ if (verbose > 2)
+ printf(" Chunk extends into next page,"
+ " erase it as well\n");
+ dfuse_special_command(dif,
+ address + chunk_size - 1,
+ ERASE_PAGE);
+ }
+ }
+ }
+
+ /* Second pass: Write data to (erased) pages */
+ for (p = 0; p < (int)dwElementSize; p += xfer_size) {
+ unsigned int address = dwElementAddress + p;
+ int chunk_size = xfer_size;
+
+ /* check if this is the last chunk */
+ if (p + chunk_size > (int)dwElementSize)
+ chunk_size = dwElementSize - p;
+
+ if (verbose) {
+ printf(" Download from image offset "
+ "%08x to memory %08x-%08x, size %i\n",
+ p, address, address + chunk_size - 1,
+ chunk_size);
+ } else {
+ dfu_progress_bar("Download", p, dwElementSize);
+ }
+
+ dfuse_special_command(dif, address, SET_ADDRESS);
+
+ /* transaction = 2 for no address offset */
+ ret = dfuse_dnload_chunk(dif, data + p, chunk_size, 2);
+ if (ret != chunk_size) {
+ errx(EX_IOERR, "Failed to write whole chunk: "
+ "%i of %i bytes", ret, chunk_size);
+ return -EINVAL;
+ }
+ }
+ if (!verbose)
+ dfu_progress_bar("Download", dwElementSize, dwElementSize);
+ return 0;
+}
+
+static void
+dfuse_memcpy(unsigned char *dst, unsigned char **src, int *rem, int size)
+{
+ if (size > *rem) {
+ errx(EX_IOERR, "Corrupt DfuSe file: "
+ "Cannot read %d bytes from %d bytes", size, *rem);
+ }
+ if (dst != NULL)
+ memcpy(dst, *src, size);
+ (*src) += size;
+ (*rem) -= size;
+}
+
+/* Download raw binary file to DfuSe device */
+int dfuse_do_bin_dnload(struct dfu_if *dif, int xfer_size,
+ struct dfu_file *file, unsigned int start_address)
+{
+ unsigned int dwElementAddress;
+ unsigned int dwElementSize;
+ unsigned char *data;
+ int ret;
+
+ dwElementAddress = start_address;
+ dwElementSize = file->size.total -
+ file->size.suffix - file->size.prefix;
+
+ printf("Downloading to address = 0x%08x, size = %i\n",
+ dwElementAddress, dwElementSize);
+
+ data = file->firmware + file->size.prefix;
+
+ ret = dfuse_dnload_element(dif, dwElementAddress, dwElementSize, data,
+ xfer_size);
+ if (ret != 0)
+ goto out_free;
+
+ printf("File downloaded successfully\n");
+ ret = dwElementSize;
+
+ out_free:
+ return ret;
+}
+
+/* Parse a DfuSe file and download contents to device */
+int dfuse_do_dfuse_dnload(struct dfu_if *dif, int xfer_size,
+ struct dfu_file *file)
+{
+ uint8_t dfuprefix[11];
+ uint8_t targetprefix[274];
+ uint8_t elementheader[8];
+ int image;
+ int element;
+ int bTargets;
+ int bAlternateSetting;
+ int dwNbElements;
+ unsigned int dwElementAddress;
+ unsigned int dwElementSize;
+ uint8_t *data;
+ int ret;
+ int rem;
+ int bFirstAddressSaved = 0;
+
+ rem = file->size.total - file->size.prefix - file->size.suffix;
+ data = file->firmware + file->size.prefix;
+
+ /* Must be larger than a minimal DfuSe header and suffix */
+ if (rem < (int)(sizeof(dfuprefix) +
+ sizeof(targetprefix) + sizeof(elementheader))) {
+ errx(EX_SOFTWARE, "File too small for a DfuSe file");
+ }
+
+ dfuse_memcpy(dfuprefix, &data, &rem, sizeof(dfuprefix));
+
+ if (strncmp((char *)dfuprefix, "DfuSe", 5)) {
+ errx(EX_IOERR, "No valid DfuSe signature");
+ return -EINVAL;
+ }
+ if (dfuprefix[5] != 0x01) {
+ errx(EX_IOERR, "DFU format revision %i not supported",
+ dfuprefix[5]);
+ return -EINVAL;
+ }
+ bTargets = dfuprefix[10];
+ printf("file contains %i DFU images\n", bTargets);
+
+ for (image = 1; image <= bTargets; image++) {
+ printf("parsing DFU image %i\n", image);
+ dfuse_memcpy(targetprefix, &data, &rem, sizeof(targetprefix));
+ if (strncmp((char *)targetprefix, "Target", 6)) {
+ errx(EX_IOERR, "No valid target signature");
+ return -EINVAL;
+ }
+ bAlternateSetting = targetprefix[6];
+ if (targetprefix[7])
+ printf("Target name: %s\n", &targetprefix[11]);
+ else
+ printf("No target name\n");
+ dwNbElements = quad2uint((unsigned char *)targetprefix + 270);
+ printf("image for alternate setting %i, ", bAlternateSetting);
+ printf("(%i elements, ", dwNbElements);
+ printf("total size = %i)\n",
+ quad2uint((unsigned char *)targetprefix + 266));
+ if (bAlternateSetting != dif->altsetting)
+ printf("Warning: Image does not match current alternate"
+ " setting.\n"
+ "Please rerun with the correct -a option setting"
+ " to download this image!\n");
+ for (element = 1; element <= dwNbElements; element++) {
+ printf("parsing element %i, ", element);
+ dfuse_memcpy(elementheader, &data, &rem, sizeof(elementheader));
+ dwElementAddress =
+ quad2uint((unsigned char *)elementheader);
+ dwElementSize =
+ quad2uint((unsigned char *)elementheader + 4);
+ printf("address = 0x%08x, ", dwElementAddress);
+ printf("size = %i\n", dwElementSize);
+
+ if (!bFirstAddressSaved) {
+ bFirstAddressSaved = 1;
+ dfuse_address = dwElementAddress;
+ }
+ /* sanity check */
+ if ((int)dwElementSize > rem)
+ errx(EX_SOFTWARE, "File too small for element size");
+
+ if (bAlternateSetting == dif->altsetting) {
+ ret = dfuse_dnload_element(dif, dwElementAddress,
+ dwElementSize, data, xfer_size);
+ } else {
+ ret = 0;
+ }
+
+ /* advance read pointer */
+ dfuse_memcpy(NULL, &data, &rem, dwElementSize);
+
+ if (ret != 0)
+ return ret;
+ }
+ }
+
+ if (rem != 0)
+ warnx("%d bytes leftover", rem);
+
+ printf("done parsing DfuSe file\n");
+
+ return 0;
+}
+
+int dfuse_do_dnload(struct dfu_if *dif, int xfer_size, struct dfu_file *file,
+ const char *dfuse_options)
+{
+ int ret;
+
+ if (dfuse_options)
+ dfuse_parse_options(dfuse_options);
+ mem_layout = parse_memory_layout((char *)dif->alt_name);
+ if (!mem_layout) {
+ errx(EX_IOERR, "Failed to parse memory layout");
+ }
+ if (dfuse_unprotect) {
+ if (!dfuse_force) {
+ errx(EX_IOERR, "The read unprotect command "
+ "will erase the flash memory"
+ "and can only be used with force\n");
+ }
+ dfuse_special_command(dif, 0, READ_UNPROTECT);
+ printf("Device disconnects, erases flash and resets now\n");
+ exit(0);
+ }
+ if (dfuse_mass_erase) {
+ if (!dfuse_force) {
+ errx(EX_IOERR, "The mass erase command "
+ "can only be used with force");
+ }
+ printf("Performing mass erase, this can take a moment\n");
+ dfuse_special_command(dif, 0, MASS_ERASE);
+ }
+ if (dfuse_address) {
+ if (file->bcdDFU == 0x11a) {
+ errx(EX_IOERR, "This is a DfuSe file, not "
+ "meant for raw download");
+ }
+ ret = dfuse_do_bin_dnload(dif, xfer_size, file, dfuse_address);
+ } else {
+ if (file->bcdDFU != 0x11a) {
+ warnx("Only DfuSe file version 1.1a is supported");
+ errx(EX_IOERR, "(for raw binary download, use the "
+ "--dfuse-address option)");
+ }
+ ret = dfuse_do_dfuse_dnload(dif, xfer_size, file);
+ }
+ free_segment_list(mem_layout);
+
+ dfu_abort_to_idle(dif);
+
+ if (dfuse_leave) {
+ dfuse_special_command(dif, dfuse_address, SET_ADDRESS);
+ dfuse_dnload_chunk(dif, NULL, 0, 2); /* Zero-size */
+ }
+ return ret;
+}
--- /dev/null
+/* This implements the ST Microsystems DFU extensions (DfuSe)
+ * as per the DfuSe 1.1a specification (Document UM0391)
+ *
+ * (C) 2010-2012 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DFUSE_H
+#define DFUSE_H
+
+#include "dfu.h"
+
+enum dfuse_command { SET_ADDRESS, ERASE_PAGE, MASS_ERASE, READ_UNPROTECT };
+
+int dfuse_special_command(struct dfu_if *dif, unsigned int address,
+ enum dfuse_command command);
+int dfuse_do_upload(struct dfu_if *dif, int xfer_size, int fd,
+ const char *dfuse_options);
+int dfuse_do_dnload(struct dfu_if *dif, int xfer_size, struct dfu_file *file,
+ const char *dfuse_options);
+
+#endif /* DFUSE_H */
--- /dev/null
+/*
+ * Helper functions for reading the memory map of a device
+ * following the ST DfuSe 1.1a specification.
+ *
+ * Copyright 2011-2014 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+
+#include "portable.h"
+#include "dfu_file.h"
+#include "dfuse_mem.h"
+
+int add_segment(struct memsegment **segment_list, struct memsegment segment)
+{
+ struct memsegment *new_element;
+
+ new_element = dfu_malloc(sizeof(struct memsegment));
+ *new_element = segment;
+ new_element->next = NULL;
+
+ if (*segment_list == NULL)
+ /* list can be empty on first call */
+ *segment_list = new_element;
+ else {
+ struct memsegment *next_element;
+
+ /* find last element in list */
+ next_element = *segment_list;
+ while (next_element->next != NULL)
+ next_element = next_element->next;
+ next_element->next = new_element;
+ }
+ return 0;
+}
+
+struct memsegment *find_segment(struct memsegment *segment_list,
+ unsigned int address)
+{
+ while (segment_list != NULL) {
+ if (segment_list->start <= address &&
+ segment_list->end >= address)
+ return segment_list;
+ segment_list = segment_list->next;
+ }
+ return NULL;
+}
+
+void free_segment_list(struct memsegment *segment_list)
+{
+ struct memsegment *next_element;
+
+ while (segment_list->next != NULL) {
+ next_element = segment_list->next;
+ free(segment_list);
+ segment_list = next_element;
+ }
+ free(segment_list);
+}
+
+/* Parse memory map from interface descriptor string
+ * encoded as per ST document UM0424 section 4.3.2.
+ */
+struct memsegment *parse_memory_layout(char *intf_desc)
+{
+
+ char multiplier, memtype;
+ unsigned int address;
+ int sectors, size;
+ char *name, *typestring;
+ int ret;
+ int count = 0;
+ char separator;
+ int scanned;
+ struct memsegment *segment_list = NULL;
+ struct memsegment segment;
+
+ name = dfu_malloc(strlen(intf_desc));
+
+ ret = sscanf(intf_desc, "@%[^/]%n", name, &scanned);
+ if (ret < 1) {
+ free(name);
+ warnx("Could not read name, sscanf returned %d", ret);
+ return NULL;
+ }
+ printf("DfuSe interface name: \"%s\"\n", name);
+
+ intf_desc += scanned;
+ typestring = dfu_malloc(strlen(intf_desc));
+
+ while (ret = sscanf(intf_desc, "/0x%x/%n", &address, &scanned),
+ ret > 0) {
+
+ intf_desc += scanned;
+ while (ret = sscanf(intf_desc, "%d*%d%c%[^,/]%n",
+ §ors, &size, &multiplier, typestring,
+ &scanned), ret > 2) {
+ intf_desc += scanned;
+
+ count++;
+ memtype = 0;
+ if (ret == 4) {
+ if (strlen(typestring) == 1
+ && typestring[0] != '/')
+ memtype = typestring[0];
+ else {
+ warnx("Parsing type identifier '%s' "
+ "failed for segment %i",
+ typestring, count);
+ continue;
+ }
+ }
+
+ /* Quirk for STM32F4 devices */
+ if (strcmp(name, "Device Feature") == 0)
+ memtype = 'e';
+
+ switch (multiplier) {
+ case 'B':
+ break;
+ case 'K':
+ size *= 1024;
+ break;
+ case 'M':
+ size *= 1024 * 1024;
+ break;
+ case 'a':
+ case 'b':
+ case 'c':
+ case 'd':
+ case 'e':
+ case 'f':
+ case 'g':
+ if (!memtype) {
+ warnx("Non-valid multiplier '%c', "
+ "interpreted as type "
+ "identifier instead",
+ multiplier);
+ memtype = multiplier;
+ break;
+ }
+ /* fallthrough if memtype was already set */
+ default:
+ warnx("Non-valid multiplier '%c', "
+ "assuming bytes", multiplier);
+ }
+
+ if (!memtype) {
+ warnx("No valid type for segment %d\n", count);
+ continue;
+ }
+
+ segment.start = address;
+ segment.end = address + sectors * size - 1;
+ segment.pagesize = size;
+ segment.memtype = memtype & 7;
+ add_segment(&segment_list, segment);
+
+ if (verbose)
+ printf("Memory segment at 0x%08x %3d x %4d = "
+ "%5d (%s%s%s)\n",
+ address, sectors, size, sectors * size,
+ memtype & DFUSE_READABLE ? "r" : "",
+ memtype & DFUSE_ERASABLE ? "e" : "",
+ memtype & DFUSE_WRITEABLE ? "w" : "");
+
+ address += sectors * size;
+
+ separator = *intf_desc;
+ if (separator == ',')
+ intf_desc += 1;
+ else
+ break;
+ } /* while per segment */
+
+ } /* while per address */
+ free(name);
+ free(typestring);
+
+ return segment_list;
+}
--- /dev/null
+/* Helper functions for reading the memory map in a device
+ * following the ST DfuSe 1.1a specification.
+ *
+ * (C) 2011 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DFUSE_MEM_H
+#define DFUSE_MEM_H
+
+#define DFUSE_READABLE 1
+#define DFUSE_ERASABLE 2
+#define DFUSE_WRITEABLE 4
+
+struct memsegment {
+ unsigned int start;
+ unsigned int end;
+ int pagesize;
+ int memtype;
+ struct memsegment *next;
+};
+
+int add_segment(struct memsegment **list, struct memsegment new_element);
+
+struct memsegment *find_segment(struct memsegment *list, unsigned int address);
+
+void free_segment_list(struct memsegment *list);
+
+struct memsegment *parse_memory_layout(char *intf_desc_str);
+
+#endif /* DFUSE_MEM_H */
--- /dev/null
+/*
+ * dfu-util
+ *
+ * Copyright 2007-2008 by OpenMoko, Inc.
+ * Copyright 2010-2016 Tormod Volden and Stefan Schmidt
+ * Copyright 2013-2014 Hans Petter Selasky <hps@bitfrost.no>
+ *
+ * Written by Harald Welte <laforge@openmoko.org>
+ *
+ * Based on existing code of dfu-programmer-0.4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <getopt.h>
+#include <libusb.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+
+#include "portable.h"
+#include "dfu.h"
+#include "usb_dfu.h"
+#include "dfu_file.h"
+#include "dfu_load.h"
+#include "dfu_util.h"
+#include "dfuse.h"
+#include "quirks.h"
+
+int verbose = 0;
+
+struct dfu_if *dfu_root = NULL;
+
+char *match_path = NULL;
+int match_vendor = -1;
+int match_product = -1;
+int match_vendor_dfu = -1;
+int match_product_dfu = -1;
+int match_config_index = -1;
+int match_iface_index = -1;
+int match_iface_alt_index = -1;
+const char *match_iface_alt_name = NULL;
+const char *match_serial = NULL;
+const char *match_serial_dfu = NULL;
+
+static int parse_match_value(const char *str, int default_value)
+{
+ char *remainder;
+ int value;
+
+ if (str == NULL) {
+ value = default_value;
+ } else if (*str == '*') {
+ value = -1; /* Match anything */
+ } else if (*str == '-') {
+ value = 0x10000; /* Impossible vendor/product ID */
+ } else {
+ value = strtoul(str, &remainder, 16);
+ if (remainder == str) {
+ value = default_value;
+ }
+ }
+ return value;
+}
+
+static void parse_vendprod(const char *str)
+{
+ const char *comma;
+ const char *colon;
+
+ /* Default to match any DFU device in runtime or DFU mode */
+ match_vendor = -1;
+ match_product = -1;
+ match_vendor_dfu = -1;
+ match_product_dfu = -1;
+
+ comma = strchr(str, ',');
+ if (comma == str) {
+ /* DFU mode vendor/product being specified without any runtime
+ * vendor/product specification, so don't match any runtime device */
+ match_vendor = match_product = 0x10000;
+ } else {
+ colon = strchr(str, ':');
+ if (colon != NULL) {
+ ++colon;
+ if ((comma != NULL) && (colon > comma)) {
+ colon = NULL;
+ }
+ }
+ match_vendor = parse_match_value(str, match_vendor);
+ match_product = parse_match_value(colon, match_product);
+ if (comma != NULL) {
+ /* Both runtime and DFU mode vendor/product specifications are
+ * available, so default DFU mode match components to the given
+ * runtime match components */
+ match_vendor_dfu = match_vendor;
+ match_product_dfu = match_product;
+ }
+ }
+ if (comma != NULL) {
+ ++comma;
+ colon = strchr(comma, ':');
+ if (colon != NULL) {
+ ++colon;
+ }
+ match_vendor_dfu = parse_match_value(comma, match_vendor_dfu);
+ match_product_dfu = parse_match_value(colon, match_product_dfu);
+ }
+}
+
+static void parse_serial(char *str)
+{
+ char *comma;
+
+ match_serial = str;
+ comma = strchr(str, ',');
+ if (comma == NULL) {
+ match_serial_dfu = match_serial;
+ } else {
+ *comma++ = 0;
+ match_serial_dfu = comma;
+ }
+ if (*match_serial == 0) match_serial = NULL;
+ if (*match_serial_dfu == 0) match_serial_dfu = NULL;
+}
+
+static int parse_number(char *str, char *nmb)
+{
+ char *endptr;
+ long val;
+
+ errno = 0;
+ val = strtol(nmb, &endptr, 0);
+
+ if ((errno == ERANGE && (val == LONG_MAX || val == LONG_MIN))
+ || (errno != 0 && val == 0) || (*endptr != '\0')) {
+ errx(EX_SOFTWARE, "Something went wrong with the argument of --%s\n", str);
+ }
+
+ if (endptr == str) {
+ errx(EX_SOFTWARE, "No digits were found from the argument of --%s\n", str);
+ }
+
+ return (int)val;
+}
+
+static void help(void)
+{
+ fprintf(stderr, "Usage: dfu-util [options] ...\n"
+ " -h --help\t\t\tPrint this help message\n"
+ " -V --version\t\t\tPrint the version number\n"
+ " -v --verbose\t\t\tPrint verbose debug statements\n"
+ " -l --list\t\t\tList currently attached DFU capable devices\n");
+ fprintf(stderr, " -e --detach\t\t\tDetach currently attached DFU capable devices\n"
+ " -E --detach-delay seconds\tTime to wait before reopening a device after detach\n"
+ " -d --device <vendor>:<product>[,<vendor_dfu>:<product_dfu>]\n"
+ "\t\t\t\tSpecify Vendor/Product ID(s) of DFU device\n"
+ " -p --path <bus-port. ... .port>\tSpecify path to DFU device\n"
+ " -c --cfg <config_nr>\t\tSpecify the Configuration of DFU device\n"
+ " -i --intf <intf_nr>\t\tSpecify the DFU Interface number\n"
+ " -S --serial <serial_string>[,<serial_string_dfu>]\n"
+ "\t\t\t\tSpecify Serial String of DFU device\n"
+ " -a --alt <alt>\t\tSpecify the Altsetting of the DFU Interface\n"
+ "\t\t\t\tby name or by number\n");
+ fprintf(stderr, " -t --transfer-size <size>\tSpecify the number of bytes per USB Transfer\n"
+ " -U --upload <file>\t\tRead firmware from device into <file>\n"
+ " -Z --upload-size <bytes>\tSpecify the expected upload size in bytes\n"
+ " -D --download <file>\t\tWrite firmware from <file> into device\n"
+ " -R --reset\t\t\tIssue USB Reset signalling once we're finished\n"
+ " -s --dfuse-address <address>\tST DfuSe mode, specify target address for\n"
+ "\t\t\t\traw file download or upload. Not applicable for\n"
+ "\t\t\t\tDfuSe file (.dfu) downloads\n"
+ );
+ exit(EX_USAGE);
+}
+
+static void print_version(void)
+{
+ printf(PACKAGE_STRING "\n\n");
+ printf("Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.\n"
+ "Copyright 2010-2016 Tormod Volden and Stefan Schmidt\n"
+ "This program is Free Software and has ABSOLUTELY NO WARRANTY\n"
+ "Please report bugs to " PACKAGE_BUGREPORT "\n\n");
+}
+
+static struct option opts[] = {
+ { "help", 0, 0, 'h' },
+ { "version", 0, 0, 'V' },
+ { "verbose", 0, 0, 'v' },
+ { "list", 0, 0, 'l' },
+ { "detach", 0, 0, 'e' },
+ { "detach-delay", 1, 0, 'E' },
+ { "device", 1, 0, 'd' },
+ { "path", 1, 0, 'p' },
+ { "configuration", 1, 0, 'c' },
+ { "cfg", 1, 0, 'c' },
+ { "interface", 1, 0, 'i' },
+ { "intf", 1, 0, 'i' },
+ { "altsetting", 1, 0, 'a' },
+ { "alt", 1, 0, 'a' },
+ { "serial", 1, 0, 'S' },
+ { "transfer-size", 1, 0, 't' },
+ { "upload", 1, 0, 'U' },
+ { "upload-size", 1, 0, 'Z' },
+ { "download", 1, 0, 'D' },
+ { "reset", 0, 0, 'R' },
+ { "dfuse-address", 1, 0, 's' },
+ { 0, 0, 0, 0 }
+};
+
+int main(int argc, char **argv)
+{
+ int expected_size = 0;
+ unsigned int transfer_size = 0;
+ enum mode mode = MODE_NONE;
+ struct dfu_status status;
+ libusb_context *ctx;
+ struct dfu_file file;
+ char *end;
+ int final_reset = 0;
+ int ret;
+ int dfuse_device = 0;
+ int fd;
+ const char *dfuse_options = NULL;
+ int detach_delay = 5;
+ uint16_t runtime_vendor;
+ uint16_t runtime_product;
+
+ memset(&file, 0, sizeof(file));
+
+ /* make sure all prints are flushed */
+ setvbuf(stdout, NULL, _IONBF, 0);
+
+ while (1) {
+ int c, option_index = 0;
+ c = getopt_long(argc, argv, "hVvleE:d:p:c:i:a:S:t:U:D:Rs:Z:", opts,
+ &option_index);
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'h':
+ help();
+ break;
+ case 'V':
+ mode = MODE_VERSION;
+ break;
+ case 'v':
+ verbose++;
+ break;
+ case 'l':
+ mode = MODE_LIST;
+ break;
+ case 'e':
+ mode = MODE_DETACH;
+ break;
+ case 'E':
+ detach_delay = parse_number("detach-delay", optarg);
+ break;
+ case 'd':
+ parse_vendprod(optarg);
+ break;
+ case 'p':
+#if (defined(LIBUSB_API_VERSION) && LIBUSB_API_VERSION >= 0x01000102) || (defined(LIBUSBX_API_VERSION) && LIBUSBX_API_VERSION >= 0x01000102)
+ match_path = optarg;
+#else
+ errx(EX_SOFTWARE, "This dfu-util was built without USB path support");
+#endif
+ break;
+ case 'c':
+ /* Configuration */
+ match_config_index = parse_number("cfg", optarg);
+ break;
+ case 'i':
+ /* Interface */
+ match_iface_index = parse_number("intf", optarg);
+ break;
+ case 'a':
+ /* Interface Alternate Setting */
+ match_iface_alt_index = strtoul(optarg, &end, 0);
+ if (*end) {
+ match_iface_alt_name = optarg;
+ match_iface_alt_index = -1;
+ }
+ break;
+ case 'S':
+ parse_serial(optarg);
+ break;
+ case 't':
+ transfer_size = parse_number("transfer-size", optarg);
+ break;
+ case 'U':
+ mode = MODE_UPLOAD;
+ file.name = optarg;
+ break;
+ case 'Z':
+ expected_size = parse_number("upload-size", optarg);
+ break;
+ case 'D':
+ mode = MODE_DOWNLOAD;
+ file.name = optarg;
+ break;
+ case 'R':
+ final_reset = 1;
+ break;
+ case 's':
+ dfuse_options = optarg;
+ break;
+ default:
+ help();
+ break;
+ }
+ }
+
+ print_version();
+ if (mode == MODE_VERSION) {
+ exit(0);
+ }
+
+ if (mode == MODE_NONE) {
+ fprintf(stderr, "You need to specify one of -D or -U\n");
+ help();
+ }
+
+ if (match_config_index == 0) {
+ /* Handle "-c 0" (unconfigured device) as don't care */
+ match_config_index = -1;
+ }
+
+ if (mode == MODE_DOWNLOAD) {
+ dfu_load_file(&file, MAYBE_SUFFIX, MAYBE_PREFIX);
+ /* If the user didn't specify product and/or vendor IDs to match,
+ * use any IDs from the file suffix for device matching */
+ if (match_vendor < 0 && file.idVendor != 0xffff) {
+ match_vendor = file.idVendor;
+ printf("Match vendor ID from file: %04x\n", match_vendor);
+ }
+ if (match_product < 0 && file.idProduct != 0xffff) {
+ match_product = file.idProduct;
+ printf("Match product ID from file: %04x\n", match_product);
+ }
+ }
+
+ ret = libusb_init(&ctx);
+ if (ret)
+ errx(EX_IOERR, "unable to initialize libusb: %s", libusb_error_name(ret));
+
+ if (verbose > 2) {
+ libusb_set_debug(ctx, 255);
+ }
+
+ probe_devices(ctx);
+
+ if (mode == MODE_LIST) {
+ list_dfu_interfaces();
+ exit(0);
+ }
+
+ if (dfu_root == NULL) {
+ errx(EX_IOERR, "No DFU capable USB device available");
+ } else if (dfu_root->next != NULL) {
+ /* We cannot safely support more than one DFU capable device
+ * with same vendor/product ID, since during DFU we need to do
+ * a USB bus reset, after which the target device will get a
+ * new address */
+ errx(EX_IOERR, "More than one DFU capable USB device found! "
+ "Try `--list' and specify the serial number "
+ "or disconnect all but one device\n");
+ }
+
+ /* We have exactly one device. Its libusb_device is now in dfu_root->dev */
+
+ printf("Opening DFU capable USB device...\n");
+ ret = libusb_open(dfu_root->dev, &dfu_root->dev_handle);
+ if (ret || !dfu_root->dev_handle)
+ errx(EX_IOERR, "Cannot open device: %s", libusb_error_name(ret));
+
+ printf("ID %04x:%04x\n", dfu_root->vendor, dfu_root->product);
+
+ printf("Run-time device DFU version %04x\n",
+ libusb_le16_to_cpu(dfu_root->func_dfu.bcdDFUVersion));
+
+ /* Transition from run-Time mode to DFU mode */
+ if (!(dfu_root->flags & DFU_IFF_DFU)) {
+ int err;
+ /* In the 'first round' during runtime mode, there can only be one
+ * DFU Interface descriptor according to the DFU Spec. */
+
+ /* FIXME: check if the selected device really has only one */
+
+ runtime_vendor = dfu_root->vendor;
+ runtime_product = dfu_root->product;
+
+ printf("Claiming USB DFU Runtime Interface...\n");
+ ret = libusb_claim_interface(dfu_root->dev_handle, dfu_root->interface);
+ if (ret < 0) {
+ errx(EX_IOERR, "Cannot claim interface %d: %s",
+ dfu_root->interface, libusb_error_name(ret));
+ }
+
+ ret = libusb_set_interface_alt_setting(dfu_root->dev_handle, dfu_root->interface, 0);
+ if (ret < 0) {
+ errx(EX_IOERR, "Cannot set alt interface zero: %s", libusb_error_name(ret));
+ }
+
+ printf("Determining device status: ");
+
+ err = dfu_get_status(dfu_root, &status);
+ if (err == LIBUSB_ERROR_PIPE) {
+ printf("Device does not implement get_status, assuming appIDLE\n");
+ status.bStatus = DFU_STATUS_OK;
+ status.bwPollTimeout = 0;
+ status.bState = DFU_STATE_appIDLE;
+ status.iString = 0;
+ } else if (err < 0) {
+ errx(EX_IOERR, "error get_status");
+ } else {
+ printf("state = %s, status = %d\n",
+ dfu_state_to_string(status.bState), status.bStatus);
+ }
+ milli_sleep(status.bwPollTimeout);
+
+ switch (status.bState) {
+ case DFU_STATE_appIDLE:
+ case DFU_STATE_appDETACH:
+ printf("Device really in Runtime Mode, send DFU "
+ "detach request...\n");
+ if (dfu_detach(dfu_root->dev_handle,
+ dfu_root->interface, 1000) < 0) {
+ warnx("error detaching");
+ }
+ if (dfu_root->func_dfu.bmAttributes & USB_DFU_WILL_DETACH) {
+ printf("Device will detach and reattach...\n");
+ } else {
+ printf("Resetting USB...\n");
+ ret = libusb_reset_device(dfu_root->dev_handle);
+ if (ret < 0 && ret != LIBUSB_ERROR_NOT_FOUND)
+ errx(EX_IOERR, "error resetting "
+ "after detach: %s", libusb_error_name(ret));
+ }
+ break;
+ case DFU_STATE_dfuERROR:
+ printf("dfuERROR, clearing status\n");
+ if (dfu_clear_status(dfu_root->dev_handle,
+ dfu_root->interface) < 0) {
+ errx(EX_IOERR, "error clear_status");
+ }
+ /* fall through */
+ default:
+ warnx("WARNING: Runtime device already in DFU state ?!?");
+ libusb_release_interface(dfu_root->dev_handle,
+ dfu_root->interface);
+ goto dfustate;
+ }
+ libusb_release_interface(dfu_root->dev_handle,
+ dfu_root->interface);
+ libusb_close(dfu_root->dev_handle);
+ dfu_root->dev_handle = NULL;
+
+ if (mode == MODE_DETACH) {
+ libusb_exit(ctx);
+ exit(0);
+ }
+
+ /* keeping handles open might prevent re-enumeration */
+ disconnect_devices();
+
+ milli_sleep(detach_delay * 1000);
+
+ /* Change match vendor and product to impossible values to force
+ * only DFU mode matches in the following probe */
+ match_vendor = match_product = 0x10000;
+
+ probe_devices(ctx);
+
+ if (dfu_root == NULL) {
+ errx(EX_IOERR, "Lost device after RESET?");
+ } else if (dfu_root->next != NULL) {
+ errx(EX_IOERR, "More than one DFU capable USB device found! "
+ "Try `--list' and specify the serial number "
+ "or disconnect all but one device");
+ }
+
+ /* Check for DFU mode device */
+ if (!(dfu_root->flags | DFU_IFF_DFU))
+ errx(EX_SOFTWARE, "Device is not in DFU mode");
+
+ printf("Opening DFU USB Device...\n");
+ ret = libusb_open(dfu_root->dev, &dfu_root->dev_handle);
+ if (ret || !dfu_root->dev_handle) {
+ errx(EX_IOERR, "Cannot open device");
+ }
+ } else {
+ /* we're already in DFU mode, so we can skip the detach/reset
+ * procedure */
+ /* If a match vendor/product was specified, use that as the runtime
+ * vendor/product, otherwise use the DFU mode vendor/product */
+ runtime_vendor = match_vendor < 0 ? dfu_root->vendor : match_vendor;
+ runtime_product = match_product < 0 ? dfu_root->product : match_product;
+ }
+
+dfustate:
+#if 0
+ printf("Setting Configuration %u...\n", dfu_root->configuration);
+ ret = libusb_set_configuration(dfu_root->dev_handle, dfu_root->configuration);
+ if (ret < 0) {
+ errx(EX_IOERR, "Cannot set configuration: %s", libusb_error_name(ret));
+ }
+#endif
+ printf("Claiming USB DFU Interface...\n");
+ ret = libusb_claim_interface(dfu_root->dev_handle, dfu_root->interface);
+ if (ret < 0) {
+ errx(EX_IOERR, "Cannot claim interface - %s", libusb_error_name(ret));
+ }
+
+ printf("Setting Alternate Setting #%d ...\n", dfu_root->altsetting);
+ ret = libusb_set_interface_alt_setting(dfu_root->dev_handle, dfu_root->interface, dfu_root->altsetting);
+ if (ret < 0) {
+ errx(EX_IOERR, "Cannot set alternate interface: %s", libusb_error_name(ret));
+ }
+
+status_again:
+ printf("Determining device status: ");
+ ret = dfu_get_status(dfu_root, &status );
+ if (ret < 0) {
+ errx(EX_IOERR, "error get_status: %s", libusb_error_name(ret));
+ }
+ printf("state = %s, status = %d\n",
+ dfu_state_to_string(status.bState), status.bStatus);
+
+ milli_sleep(status.bwPollTimeout);
+
+ switch (status.bState) {
+ case DFU_STATE_appIDLE:
+ case DFU_STATE_appDETACH:
+ errx(EX_IOERR, "Device still in Runtime Mode!");
+ break;
+ case DFU_STATE_dfuERROR:
+ printf("dfuERROR, clearing status\n");
+ if (dfu_clear_status(dfu_root->dev_handle, dfu_root->interface) < 0) {
+ errx(EX_IOERR, "error clear_status");
+ }
+ goto status_again;
+ break;
+ case DFU_STATE_dfuDNLOAD_IDLE:
+ case DFU_STATE_dfuUPLOAD_IDLE:
+ printf("aborting previous incomplete transfer\n");
+ if (dfu_abort(dfu_root->dev_handle, dfu_root->interface) < 0) {
+ errx(EX_IOERR, "can't send DFU_ABORT");
+ }
+ goto status_again;
+ break;
+ case DFU_STATE_dfuIDLE:
+ printf("dfuIDLE, continuing\n");
+ break;
+ default:
+ break;
+ }
+
+ if (DFU_STATUS_OK != status.bStatus ) {
+ printf("WARNING: DFU Status: '%s'\n",
+ dfu_status_to_string(status.bStatus));
+ /* Clear our status & try again. */
+ if (dfu_clear_status(dfu_root->dev_handle, dfu_root->interface) < 0)
+ errx(EX_IOERR, "USB communication error");
+ if (dfu_get_status(dfu_root, &status) < 0)
+ errx(EX_IOERR, "USB communication error");
+ if (DFU_STATUS_OK != status.bStatus)
+ errx(EX_SOFTWARE, "Status is not OK: %d", status.bStatus);
+
+ milli_sleep(status.bwPollTimeout);
+ }
+
+ printf("DFU mode device DFU version %04x\n",
+ libusb_le16_to_cpu(dfu_root->func_dfu.bcdDFUVersion));
+
+ if (dfu_root->func_dfu.bcdDFUVersion == libusb_cpu_to_le16(0x11a))
+ dfuse_device = 1;
+
+ /* If not overridden by the user */
+ if (!transfer_size) {
+ transfer_size = libusb_le16_to_cpu(
+ dfu_root->func_dfu.wTransferSize);
+ if (transfer_size) {
+ printf("Device returned transfer size %i\n",
+ transfer_size);
+ } else {
+ errx(EX_IOERR, "Transfer size must be specified");
+ }
+ }
+
+#ifdef HAVE_GETPAGESIZE
+/* autotools lie when cross-compiling for Windows using mingw32/64 */
+#ifndef __MINGW32__
+ /* limitation of Linux usbdevio */
+ if ((int)transfer_size > getpagesize()) {
+ transfer_size = getpagesize();
+ printf("Limited transfer size to %i\n", transfer_size);
+ }
+#endif /* __MINGW32__ */
+#endif /* HAVE_GETPAGESIZE */
+
+ if (transfer_size < dfu_root->bMaxPacketSize0) {
+ transfer_size = dfu_root->bMaxPacketSize0;
+ printf("Adjusted transfer size to %i\n", transfer_size);
+ }
+
+ switch (mode) {
+ case MODE_UPLOAD:
+ /* open for "exclusive" writing */
+ fd = open(file.name, O_WRONLY | O_BINARY | O_CREAT | O_EXCL | O_TRUNC, 0666);
+ if (fd < 0)
+ err(EX_IOERR, "Cannot open file %s for writing", file.name);
+
+ if (dfuse_device || dfuse_options) {
+ if (dfuse_do_upload(dfu_root, transfer_size, fd,
+ dfuse_options) < 0)
+ exit(1);
+ } else {
+ if (dfuload_do_upload(dfu_root, transfer_size,
+ expected_size, fd) < 0) {
+ exit(1);
+ }
+ }
+ close(fd);
+ break;
+
+ case MODE_DOWNLOAD:
+ if (((file.idVendor != 0xffff && file.idVendor != runtime_vendor) ||
+ (file.idProduct != 0xffff && file.idProduct != runtime_product)) &&
+ ((file.idVendor != 0xffff && file.idVendor != dfu_root->vendor) ||
+ (file.idProduct != 0xffff && file.idProduct != dfu_root->product))) {
+ errx(EX_IOERR, "Error: File ID %04x:%04x does "
+ "not match device (%04x:%04x or %04x:%04x)",
+ file.idVendor, file.idProduct,
+ runtime_vendor, runtime_product,
+ dfu_root->vendor, dfu_root->product);
+ }
+ if (dfuse_device || dfuse_options || file.bcdDFU == 0x11a) {
+ if (dfuse_do_dnload(dfu_root, transfer_size, &file,
+ dfuse_options) < 0)
+ exit(1);
+ } else {
+ if (dfuload_do_dnload(dfu_root, transfer_size, &file) < 0)
+ exit(1);
+ }
+ break;
+ case MODE_DETACH:
+ if (dfu_detach(dfu_root->dev_handle, dfu_root->interface, 1000) < 0) {
+ warnx("can't detach");
+ }
+ break;
+ default:
+ errx(EX_IOERR, "Unsupported mode: %u", mode);
+ break;
+ }
+
+ if (final_reset) {
+ if (dfu_detach(dfu_root->dev_handle, dfu_root->interface, 1000) < 0) {
+ /* Even if detach failed, just carry on to leave the
+ device in a known state */
+ warnx("can't detach");
+ }
+ printf("Resetting USB to switch back to runtime mode\n");
+ ret = libusb_reset_device(dfu_root->dev_handle);
+ if (ret < 0 && ret != LIBUSB_ERROR_NOT_FOUND) {
+ errx(EX_IOERR, "error resetting after download: %s", libusb_error_name(ret));
+ }
+ }
+
+ libusb_close(dfu_root->dev_handle);
+ dfu_root->dev_handle = NULL;
+ libusb_exit(ctx);
+
+ return (0);
+}
--- /dev/null
+
+#ifndef PORTABLE_H
+#define PORTABLE_H
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#else
+# define PACKAGE "dfu-util"
+# define PACKAGE_VERSION "0.9-msvc"
+# define PACKAGE_STRING "dfu-util 0.9-msvc"
+# define PACKAGE_BUGREPORT "http://sourceforge.net/p/dfu-util/tickets/"
+# include <io.h>
+#endif /* HAVE_CONFIG_H */
+
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#ifdef HAVE_NANOSLEEP
+# include <time.h>
+# define milli_sleep(msec) do {\
+ if (msec) {\
+ struct timespec nanosleepDelay = { (msec) / 1000, ((msec) % 1000) * 1000000 };\
+ nanosleep(&nanosleepDelay, NULL);\
+ } } while (0)
+#elif defined HAVE_WINDOWS_H
+# define milli_sleep(msec) do {\
+ if (msec) {\
+ Sleep(msec);\
+ } } while (0)
+#else
+# error "Can't get no sleep! Please report"
+#endif /* HAVE_NANOSLEEP */
+
+#ifdef HAVE_ERR
+# include <err.h>
+#else
+# include <errno.h>
+# include <string.h>
+# define warnx(...) do {\
+ fprintf(stderr, __VA_ARGS__);\
+ fprintf(stderr, "\n"); } while (0)
+# define errx(eval, ...) do {\
+ warnx(__VA_ARGS__);\
+ exit(eval); } while (0)
+# define warn(...) do {\
+ fprintf(stderr, "%s: ", strerror(errno));\
+ warnx(__VA_ARGS__); } while (0)
+# define err(eval, ...) do {\
+ warn(__VA_ARGS__);\
+ exit(eval); } while (0)
+#endif /* HAVE_ERR */
+
+#ifdef HAVE_SYSEXITS_H
+# include <sysexits.h>
+#else
+# define EX_OK 0 /* successful termination */
+# define EX_USAGE 64 /* command line usage error */
+# define EX_SOFTWARE 70 /* internal software error */
+# define EX_IOERR 74 /* input/output error */
+#endif /* HAVE_SYSEXITS_H */
+
+#ifndef O_BINARY
+# define O_BINARY 0
+#endif
+
+#ifndef off_t
+# define off_t long int
+#endif
+
+#endif /* PORTABLE_H */
--- /dev/null
+/*
+ * dfu-prefix
+ *
+ * Copyright 2011-2012 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright 2013 Hans Petter Selasky <hps@bitfrost.no>
+ * Copyright 2014 Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <getopt.h>
+#include <string.h>
+
+#include "portable.h"
+#include "dfu_file.h"
+
+enum mode {
+ MODE_NONE,
+ MODE_ADD,
+ MODE_DEL,
+ MODE_CHECK
+};
+
+int verbose;
+
+static void help(void)
+{
+ fprintf(stderr, "Usage: dfu-prefix [options] ...\n"
+ " -h --help\t\t\tPrint this help message\n"
+ " -V --version\t\t\tPrint the version number\n"
+ " -c --check <file>\t\tCheck DFU prefix of <file>\n"
+ " -D --delete <file>\t\tDelete DFU prefix from <file>\n"
+ " -a --add <file>\t\tAdd DFU prefix to <file>\n"
+ "In combination with -a:\n"
+ );
+ fprintf(stderr, " -s --stellaris-address <address> Add TI Stellaris address prefix to <file>\n"
+ "In combination with -D or -c:\n"
+ " -T --stellaris\t\tAct on TI Stellaris address prefix of <file>\n"
+ "In combination with -a or -D or -c:\n"
+ " -L --lpc-prefix\t\tUse NXP LPC DFU prefix format\n"
+ );
+ exit(EX_USAGE);
+}
+
+static void print_version(void)
+{
+ printf("dfu-prefix (%s) %s\n\n", PACKAGE, PACKAGE_VERSION);
+ printf("Copyright 2011-2012 Stefan Schmidt, 2014 Uwe Bonnes\n"
+ "This program is Free Software and has ABSOLUTELY NO WARRANTY\n"
+ "Please report bugs to %s\n\n", PACKAGE_BUGREPORT);
+
+}
+
+static struct option opts[] = {
+ { "help", 0, 0, 'h' },
+ { "version", 0, 0, 'V' },
+ { "check", 1, 0, 'c' },
+ { "add", 1, 0, 'a' },
+ { "delete", 1, 0, 'D' },
+ { "stellaris-address", 1, 0, 's' },
+ { "stellaris", 0, 0, 'T' },
+ { "LPC", 0, 0, 'L' },
+};
+int main(int argc, char **argv)
+{
+ struct dfu_file file;
+ enum mode mode = MODE_NONE;
+ enum prefix_type type = ZERO_PREFIX;
+ uint32_t lmdfu_flash_address = 0;
+ char *end;
+
+ /* make sure all prints are flushed */
+ setvbuf(stdout, NULL, _IONBF, 0);
+
+ print_version();
+
+ memset(&file, 0, sizeof(file));
+
+ while (1) {
+ int c, option_index = 0;
+ c = getopt_long(argc, argv, "hVc:a:D:p:v:d:s:TL", opts,
+ &option_index);
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'h':
+ help();
+ break;
+ case 'V':
+ exit(0);
+ break;
+ case 'D':
+ file.name = optarg;
+ mode = MODE_DEL;
+ break;
+ case 'c':
+ file.name = optarg;
+ mode = MODE_CHECK;
+ break;
+ case 'a':
+ file.name = optarg;
+ mode = MODE_ADD;
+ break;
+ case 's':
+ lmdfu_flash_address = strtoul(optarg, &end, 0);
+ if (*end) {
+ errx(EX_IOERR, "Invalid lmdfu "
+ "address: %s", optarg);
+ }
+ /* fall-through */
+ case 'T':
+ type = LMDFU_PREFIX;
+ break;
+ case 'L':
+ type = LPCDFU_UNENCRYPTED_PREFIX;
+ break;
+ default:
+ help();
+ break;
+ }
+ }
+
+ if (!file.name) {
+ fprintf(stderr, "You need to specify a filename\n");
+ help();
+ }
+
+ switch(mode) {
+ case MODE_ADD:
+ if (type == ZERO_PREFIX)
+ errx(EX_IOERR, "Prefix type must be specified");
+ dfu_load_file(&file, MAYBE_SUFFIX, NO_PREFIX);
+ file.lmdfu_address = lmdfu_flash_address;
+ file.prefix_type = type;
+ printf("Adding prefix to file\n");
+ dfu_store_file(&file, file.size.suffix != 0, 1);
+ break;
+
+ case MODE_CHECK:
+ dfu_load_file(&file, MAYBE_SUFFIX, MAYBE_PREFIX);
+ show_suffix_and_prefix(&file);
+ if (type > ZERO_PREFIX && file.prefix_type != type)
+ errx(EX_IOERR, "No prefix of requested type");
+ break;
+
+ case MODE_DEL:
+ dfu_load_file(&file, MAYBE_SUFFIX, NEEDS_PREFIX);
+ if (type > ZERO_PREFIX && file.prefix_type != type)
+ errx(EX_IOERR, "No prefix of requested type");
+ printf("Removing prefix from file\n");
+ /* if there was a suffix, rewrite it */
+ dfu_store_file(&file, file.size.suffix != 0, 0);
+ break;
+
+ default:
+ help();
+ break;
+ }
+ return (0);
+}
--- /dev/null
+/*
+ * Simple quirk system for dfu-util
+ *
+ * Copyright 2010-2014 Tormod Volden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdint.h>
+#include "quirks.h"
+
+uint16_t get_quirks(uint16_t vendor, uint16_t product, uint16_t bcdDevice)
+{
+ uint16_t quirks = 0;
+
+ /* Device returns bogus bwPollTimeout values */
+ if ((vendor == VENDOR_OPENMOKO || vendor == VENDOR_FIC) &&
+ product >= PRODUCT_FREERUNNER_FIRST &&
+ product <= PRODUCT_FREERUNNER_LAST)
+ quirks |= QUIRK_POLLTIMEOUT;
+
+ if (vendor == VENDOR_VOTI &&
+ product == PRODUCT_OPENPCD)
+ quirks |= QUIRK_POLLTIMEOUT;
+
+ /* Reports wrong DFU version in DFU descriptor */
+ if (vendor == VENDOR_LEAFLABS &&
+ product == PRODUCT_MAPLE3 &&
+ bcdDevice == 0x0200)
+ quirks |= QUIRK_FORCE_DFU11;
+
+ /* old devices(bcdDevice == 0) return bogus bwPollTimeout values */
+ if (vendor == VENDOR_SIEMENS &&
+ (product == PRODUCT_PXM40 || product == PRODUCT_PXM50) &&
+ bcdDevice == 0)
+ quirks |= QUIRK_POLLTIMEOUT;
+
+ /* M-Audio Transit returns bogus bwPollTimeout values */
+ if (vendor == VENDOR_MIDIMAN &&
+ product == PRODUCT_TRANSIT)
+ quirks |= QUIRK_POLLTIMEOUT;
+
+ return (quirks);
+}
--- /dev/null
+#ifndef DFU_QUIRKS_H
+#define DFU_QUIRKS_H
+
+#define VENDOR_OPENMOKO 0x1d50 /* Openmoko Freerunner / GTA02 */
+#define VENDOR_FIC 0x1457 /* Openmoko Freerunner / GTA02 */
+#define VENDOR_VOTI 0x16c0 /* OpenPCD Reader */
+#define VENDOR_LEAFLABS 0x1eaf /* Maple */
+#define VENDOR_SIEMENS 0x0908 /* Siemens AG */
+#define VENDOR_MIDIMAN 0x0763 /* Midiman */
+
+#define PRODUCT_FREERUNNER_FIRST 0x5117
+#define PRODUCT_FREERUNNER_LAST 0x5126
+#define PRODUCT_OPENPCD 0x076b
+#define PRODUCT_MAPLE3 0x0003 /* rev 3 and 5 */
+#define PRODUCT_PXM40 0x02c4 /* Siemens AG, PXM 40 */
+#define PRODUCT_PXM50 0x02c5 /* Siemens AG, PXM 50 */
+#define PRODUCT_TRANSIT 0x2806 /* M-Audio Transit (Midiman) */
+
+#define QUIRK_POLLTIMEOUT (1<<0)
+#define QUIRK_FORCE_DFU11 (1<<1)
+
+/* Fallback value, works for OpenMoko */
+#define DEFAULT_POLLTIMEOUT 5
+
+uint16_t get_quirks(uint16_t vendor, uint16_t product, uint16_t bcdDevice);
+
+#endif /* DFU_QUIRKS_H */
--- /dev/null
+/*
+ * dfu-suffix
+ *
+ * Copyright 2011-2012 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright 2013 Hans Petter Selasky <hps@bitfrost.no>
+ * Copyright 2014 Tormod Volden <debian.tormod@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <getopt.h>
+#include <string.h>
+
+#include "portable.h"
+#include "dfu_file.h"
+
+enum mode {
+ MODE_NONE,
+ MODE_ADD,
+ MODE_DEL,
+ MODE_CHECK
+};
+
+int verbose;
+
+static void help(void)
+{
+ fprintf(stderr, "Usage: dfu-suffix [options] ...\n"
+ " -h --help\t\t\tPrint this help message\n"
+ " -V --version\t\t\tPrint the version number\n"
+ " -c --check <file>\t\tCheck DFU suffix of <file>\n"
+ " -a --add <file>\t\tAdd DFU suffix to <file>\n"
+ " -D --delete <file>\t\tDelete DFU suffix from <file>\n"
+ " -p --pid <productID>\t\tAdd product ID into DFU suffix in <file>\n"
+ " -v --vid <vendorID>\t\tAdd vendor ID into DFU suffix in <file>\n"
+ " -d --did <deviceID>\t\tAdd device ID into DFU suffix in <file>\n"
+ " -S --spec <specID>\t\tAdd DFU specification ID into DFU suffix in <file>\n"
+ );
+ exit(EX_USAGE);
+}
+
+static void print_version(void)
+{
+ printf("dfu-suffix (%s) %s\n\n", PACKAGE, PACKAGE_VERSION);
+ printf("Copyright 2011-2012 Stefan Schmidt, 2013-2014 Tormod Volden\n"
+ "This program is Free Software and has ABSOLUTELY NO WARRANTY\n"
+ "Please report bugs to %s\n\n", PACKAGE_BUGREPORT);
+
+}
+
+static struct option opts[] = {
+ { "help", 0, 0, 'h' },
+ { "version", 0, 0, 'V' },
+ { "check", 1, 0, 'c' },
+ { "add", 1, 0, 'a' },
+ { "delete", 1, 0, 'D' },
+ { "pid", 1, 0, 'p' },
+ { "vid", 1, 0, 'v' },
+ { "did", 1, 0, 'd' },
+ { "spec", 1, 0, 'S' },
+};
+
+int main(int argc, char **argv)
+{
+ struct dfu_file file;
+ int pid, vid, did, spec;
+ enum mode mode = MODE_NONE;
+
+ /* make sure all prints are flushed */
+ setvbuf(stdout, NULL, _IONBF, 0);
+
+ print_version();
+
+ pid = vid = did = 0xffff;
+ spec = 0x0100; /* Default to bcdDFU version 1.0 */
+ memset(&file, 0, sizeof(file));
+
+ while (1) {
+ int c, option_index = 0;
+ c = getopt_long(argc, argv, "hVc:a:D:p:v:d:S:s:T", opts,
+ &option_index);
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'h':
+ help();
+ break;
+ case 'V':
+ exit(0);
+ break;
+ case 'D':
+ file.name = optarg;
+ mode = MODE_DEL;
+ break;
+ case 'p':
+ pid = strtol(optarg, NULL, 16);
+ break;
+ case 'v':
+ vid = strtol(optarg, NULL, 16);
+ break;
+ case 'd':
+ did = strtol(optarg, NULL, 16);
+ break;
+ case 'S':
+ spec = strtol(optarg, NULL, 16);
+ break;
+ case 'c':
+ file.name = optarg;
+ mode = MODE_CHECK;
+ break;
+ case 'a':
+ file.name = optarg;
+ mode = MODE_ADD;
+ break;
+ default:
+ help();
+ break;
+ }
+ }
+
+ if (!file.name) {
+ fprintf(stderr, "You need to specify a filename\n");
+ help();
+ }
+
+ if (spec != 0x0100 && spec != 0x011a) {
+ fprintf(stderr, "Only DFU specification 0x0100 and 0x011a supported\n");
+ help();
+ }
+
+ switch(mode) {
+ case MODE_ADD:
+ dfu_load_file(&file, NO_SUFFIX, MAYBE_PREFIX);
+ file.idVendor = vid;
+ file.idProduct = pid;
+ file.bcdDevice = did;
+ file.bcdDFU = spec;
+ /* always write suffix, rewrite prefix if there was one */
+ dfu_store_file(&file, 1, file.size.prefix != 0);
+ printf("Suffix successfully added to file\n");
+ break;
+
+ case MODE_CHECK:
+ dfu_load_file(&file, NEEDS_SUFFIX, MAYBE_PREFIX);
+ show_suffix_and_prefix(&file);
+ break;
+
+ case MODE_DEL:
+ dfu_load_file(&file, NEEDS_SUFFIX, MAYBE_PREFIX);
+ dfu_store_file(&file, 0, file.size.prefix != 0);
+ if (file.size.suffix) /* had a suffix */
+ printf("Suffix successfully removed from file\n");
+ break;
+
+ default:
+ help();
+ break;
+ }
+ return (0);
+}
--- /dev/null
+#ifndef USB_DFU_H
+#define USB_DFU_H
+/* USB Device Firmware Update Implementation for OpenPCD
+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * Protocol definitions for USB DFU
+ *
+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdint.h>
+
+#define USB_DT_DFU 0x21
+
+#ifdef _MSC_VER
+# pragma pack(push)
+# pragma pack(1)
+#endif /* _MSC_VER */
+struct usb_dfu_func_descriptor {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bmAttributes;
+#define USB_DFU_CAN_DOWNLOAD (1 << 0)
+#define USB_DFU_CAN_UPLOAD (1 << 1)
+#define USB_DFU_MANIFEST_TOL (1 << 2)
+#define USB_DFU_WILL_DETACH (1 << 3)
+ uint16_t wDetachTimeOut;
+ uint16_t wTransferSize;
+ uint16_t bcdDFUVersion;
+#ifdef _MSC_VER
+};
+# pragma pack(pop)
+#elif defined __GNUC__
+# if defined __MINGW32__
+} __attribute__ ((__packed__, __gcc_struct__));
+# else
+} __attribute__ ((__packed__));
+# endif
+#else
+ #warning "No way to pack struct on this compiler? This will break!"
+#endif /* _MSC_VER */
+
+#define USB_DT_DFU_SIZE 9
+
+#define USB_TYPE_DFU (LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE)
+
+/* DFU class-specific requests (Section 3, DFU Rev 1.1) */
+#define USB_REQ_DFU_DETACH 0x00
+#define USB_REQ_DFU_DNLOAD 0x01
+#define USB_REQ_DFU_UPLOAD 0x02
+#define USB_REQ_DFU_GETSTATUS 0x03
+#define USB_REQ_DFU_CLRSTATUS 0x04
+#define USB_REQ_DFU_GETSTATE 0x05
+#define USB_REQ_DFU_ABORT 0x06
+
+/* DFU_GETSTATUS bStatus values (Section 6.1.2, DFU Rev 1.1) */
+#define DFU_STATUS_OK 0x00
+#define DFU_STATUS_errTARGET 0x01
+#define DFU_STATUS_errFILE 0x02
+#define DFU_STATUS_errWRITE 0x03
+#define DFU_STATUS_errERASE 0x04
+#define DFU_STATUS_errCHECK_ERASED 0x05
+#define DFU_STATUS_errPROG 0x06
+#define DFU_STATUS_errVERIFY 0x07
+#define DFU_STATUS_errADDRESS 0x08
+#define DFU_STATUS_errNOTDONE 0x09
+#define DFU_STATUS_errFIRMWARE 0x0a
+#define DFU_STATUS_errVENDOR 0x0b
+#define DFU_STATUS_errUSBR 0x0c
+#define DFU_STATUS_errPOR 0x0d
+#define DFU_STATUS_errUNKNOWN 0x0e
+#define DFU_STATUS_errSTALLEDPKT 0x0f
+
+enum dfu_state {
+ DFU_STATE_appIDLE = 0,
+ DFU_STATE_appDETACH = 1,
+ DFU_STATE_dfuIDLE = 2,
+ DFU_STATE_dfuDNLOAD_SYNC = 3,
+ DFU_STATE_dfuDNBUSY = 4,
+ DFU_STATE_dfuDNLOAD_IDLE = 5,
+ DFU_STATE_dfuMANIFEST_SYNC = 6,
+ DFU_STATE_dfuMANIFEST = 7,
+ DFU_STATE_dfuMANIFEST_WAIT_RST = 8,
+ DFU_STATE_dfuUPLOAD_IDLE = 9,
+ DFU_STATE_dfuERROR = 10
+};
+
+#endif /* USB_DFU_H */
--- /dev/null
+
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en-US">
+
+<head>
+ <title>Building dfu-util from source</title>
+ <meta http-equiv="content-type" content="application/xhtml+xml; charset=iso-8859-1" />
+ <meta name="author" content="Tormod Volden" />
+ <meta name="keywords" content="dfu-util, build, compile" />
+ <meta name="description" content="How to build dfu-util from source" />
+ <link rel="icon" type="image/png" href="favicon.ico" />
+ <link rel="stylesheet" type="text/css" href="simple.css" media="screen, print" />
+</head>
+
+<body>
+<div id="middlebox">
+ <h1>How to build dfu-util from source</h1>
+
+<h2>Prerequisites for building from git</h2>
+<h3>Mac OS X</h3>
+<p>
+First install MacPorts (and if you are on 10.6 or older, the Java Developer Package) and then run:
+</p>
+<pre>
+ sudo port install libusb-devel git-core
+</pre>
+
+<h3>FreeBSD</h3>
+<pre>
+ sudo pkg_add -r git pkgconf
+</pre>
+
+<h3>Ubuntu and Debian and derivatives</h3>
+<pre>
+ sudo apt-get build-dep dfu-util
+ sudo apt-get install libusb-1.0-0-dev
+</pre>
+
+<h2>Get the source code and build it</h2>
+<p>
+The first time you will have to clone the git repository:
+</p>
+<pre>
+ git clone git://git.code.sf.net/p/dfu-util/dfu-util
+ cd dfu-util
+</pre>
+<p>
+If you later want to update to latest git version, just run this:
+</p>
+<pre>
+ make maintainer-clean
+ git pull
+</pre>
+<p>
+To build the source:
+</p>
+<pre>
+ ./autogen.sh
+ ./configure # on most systems
+ make
+</pre>
+
+<p>
+If you are building on Mac OS X, replace the ./configure command with:
+</p>
+<pre>
+ ./configure --libdir=/opt/local/lib --includedir=/opt/local/include # on MacOSX only
+</pre>
+
+<p>
+Your dfu-util binary will be inside the src folder. Use it from there, or install it to /usr/local/bin by running "sudo make install".
+</p>
+
+<h2>Cross-building for Windows</h2>
+
+<p>
+Windows binaries can be built in a <a href="http://mingw.org/">MinGW</a>
+environment, on a Windows computer or cross-hosted in another OS.
+To build it on a Debian or Ubuntu host, first install build dependencies:
+</p>
+<pre>
+ sudo apt-get build-dep libusb-1.0-0 dfu-util
+ sudo apt-get install mingw32
+</pre>
+
+<p>
+The below example builds dfu-util 0.8 and libusb 1.0.20 from unpacked release
+tarballs. If you instead build from git, you will have to run "./autogen.sh"
+before running the "./configure" steps.
+</p>
+
+<pre>
+mkdir -p build
+cd libusb-1.0.20
+PKG_CONFIG_PATH=$PWD/../build/lib/pkgconfig ./configure \
+ --host=i586-mingw32msvc --prefix=$PWD/../build
+make
+make install
+cd ..
+
+cd dfu-util-0.8
+PKG_CONFIG_PATH=$PWD/../build/lib/pkgconfig ./configure \
+ --host=i586-mingw32msvc --prefix=$PWD/../build
+make
+make install
+cd ..
+</pre>
+The build files will now be in build/bin.
+<p>
+
+<h2>Building on Windows using MinGW-w64 from MSYS2</h2>
+
+<p>
+This assumes using release tarballs or having run ./autogen.sh on
+the git sources.
+</p>
+
+<p>
+First install MSYS2 from the <a href="http://msys2.github.io/">MSYS2 installer</a> home page.
+</p>
+
+<p>
+To avoid interference from other software on your computer, set a clean path in the MSYS window before running the upgrade commands:
+</p>
+<pre>
+PATH=/usr/local/bin:/usr/bin:/bin:/opt/bin
+
+update-core
+pacman -Su
+pacman -Sy
+</pre>
+
+Close all MSYS windows and open a new one to install the toolchain:
+<pre>
+PATH=/usr/local/bin:/usr/bin:/bin:/opt/bin
+
+pacman -S mingw-w64-x86_64-gcc
+pacman -S make
+</pre>
+
+Now open a MINGW64 shell to build libusb and dfu-util:
+<pre>
+PATH=/mingw64/bin:/usr/local/bin:/usr/bin:/bin
+
+cd libusb-1.0.20
+./configure --prefix=$PWD/../build
+make
+make install
+cd ..
+
+cd dfu-util-0.9
+./configure USB_CFLAGS="-I$PWD/../build/include/libusb-1.0" \
+ USB_LIBS="-L $PWD/../build/lib -lusb-1.0" --prefix=$PWD/../build
+make
+make install
+cd ..
+</pre>
+To link libusb statically into dfu-util.exe use instead of only "make":
+<pre>
+make LDFLAGS=-static
+</pre>
+The built executables (and DLL) will now be in the build/bin folder.
+
+<p>
+[<a href="index.html">Back to dfu-util main page</a>]
+</p>
+ <p id="footer">
+ ©2014–2016 Tormod Volden — Valid <a href="http://validator.w3.org/check?uri=referer" title="validate XHTML">XHTML</a> & <a href="http://jigsaw.w3.org/css-validator" title="validate CSS">CSS</a>
+ </p>
+</div>
+</body>
+</html>
--- /dev/null
+
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<HTML><HEAD><TITLE>Man page of DFU-UTIL</TITLE>
+<meta http-equiv="content-type" content="text/html; charset=iso-8859-1">
+</HEAD><BODY>
+<H1>DFU-UTIL(1)</H1>
+
+<A NAME="lbAB"> </A>
+<H2>NAME</H2>
+
+dfu-util - Device firmware update (DFU) USB programmer
+<A NAME="lbAC"> </A>
+<H2>SYNOPSIS</H2>
+
+
+<DL COMPACT>
+<DT>
+<B>dfu-util</B>
+
+<B>-l </B>
+
+[<B>-v</B>]
+
+[<B>-d</B>
+
+<I>vid:pid</I>[,<I>vid:pid</I>]]
+
+[<B>-p</B>
+
+<I>path</I>]
+
+[<B>-c</B>
+
+<I>configuration</I>]
+
+[<B>-i</B>
+
+<I>interface</I>]
+
+[<B>-a</B>
+
+<I>alt-intf</I>]
+
+[<B>-S</B>
+
+<I>serial</I>[,<I>serial</I>]]
+
+
+<DT>
+<B>dfu-util</B>
+
+[<B>-v</B>]
+
+[<B>-d</B>
+
+<I>vid:pid</I>[,<I>vid:pid</I>]]
+
+[<B>-p</B>
+
+<I>path</I>]
+
+[<B>-c</B>
+
+<I>configuration</I>]
+
+[<B>-i</B>
+
+<I>interface</I>]
+
+[<B>-a</B>
+
+<I>alt-intf</I>]
+
+[<B>-S</B>
+
+<I>serial</I>[,<I>serial</I>]]
+
+[<B>-t</B>
+
+<I>size</I>]
+
+[<B>-Z</B>
+
+<I>size</I>]
+
+[<B>-s</B>
+
+<I>address</I>]
+
+[<B>-R</B>]
+
+[<B>-D</B>|<B>-U</B>
+
+<I>file</I>]
+
+
+<DT>
+<B>dfu-util</B>
+
+[<B>-hV</B>]
+
+</DL>
+<A NAME="lbAD"> </A>
+<H2>DESCRIPTION</H2>
+
+<B>dfu-util</B>
+
+is a program that implements the host (computer) side of the USB DFU
+(Universal Serial Bus Device Firmware Upgrade) protocol.
+<P>
+dfu-util communicates with devices that implement the device side of the
+USB DFU protocol, and is often used to upgrade the firmware of such
+devices.
+<A NAME="lbAE"> </A>
+<H2>OPTIONS</H2>
+
+<DL COMPACT>
+<DT><B>-l, --list</B>
+
+<DD>
+List the currently attached DFU capable USB devices.
+<DT><B>-d, --device</B> [<I>Run-Time VENDOR</I>]:[<I>Run-Time PRODUCT</I>][,[<I>DFU Mode VENDOR</I>]:[<I>DFU Mode PRODUCT</I>]]
+
+<DD>
+<DL COMPACT><DT><DD>
+Specify run-time and/or DFU mode vendor and/or product IDs of the DFU device
+to work with. <B>VENDOR</B> and <B>PRODUCT</B> are hexadecimal numbers (no prefix
+needed), "*" (match any), or "-" (match nothing). By default, any DFU capable
+device in either run-time or DFU mode will be considered.
+<P>
+If you only have one standards-compliant DFU device attached to your computer,
+this parameter is optional. However, as soon as you have multiple DFU devices
+connected, dfu-util will detect this and abort, asking you to specify which
+device to use.
+<P>
+If only run-time IDs are specified (e.g. "<B>--device 1457:51ab</B>"), then in
+addition to the specified run-time IDs, any DFU mode devices will also be
+considered. This is beneficial to allow a DFU capable device to be found
+again after a switch to DFU mode, since the vendor and/or product ID of a
+device usually changes in DFU mode.
+<P>
+If only DFU mode IDs are specified (e.g. "<B>--device ,951:26</B>"), then all
+run-time devices will be ignored, making it easy to target a specific device in
+DFU mode.
+<P>
+If both run-time and DFU mode IDs are specified (e.g. "<B>--device
+1457:51ab,:2bc</B>"), then unspecified DFU mode components will use the run-time
+value specified.
+<P>
+Examples:
+<DL COMPACT>
+<DT><B>--device 1457:51ab,951:26</B>
+
+<DD>
+<BR>
+
+Work with a device in run-time mode with
+vendor ID 0x1457 and product ID 0x51ab, or in DFU mode with vendor ID 0x0951
+and product ID 0x0026
+<P>
+<DT><B>--device 1457:51ab,:2bc</B>
+
+<DD>
+<BR>
+
+Work with a device in run-time mode with vendor ID 0x1457 and product ID
+0x51ab, or in DFU mode with vendor ID 0x1457 and product ID 0x02bc
+<P>
+<DT><B>--device 1457:51ab</B>
+
+<DD>
+<BR>
+
+Work with a device in run-time mode with vendor ID 0x1457 and product ID
+0x51ab, or in DFU mode with any vendor and product ID
+<P>
+<DT><B>--device ,951:26</B>
+
+<DD>
+<BR>
+
+Work with a device in DFU mode with vendor ID 0x0951 and product ID 0x0026
+<P>
+<DT><B>--device *,-</B>
+
+<DD>
+<BR>
+
+Work with any device in run-time mode, and ignore any device in DFU mode
+<P>
+<DT><B>--device ,</B>
+
+<DD>
+<BR>
+
+Ignore any device in run-time mode, and Work with any device in DFU mode
+</DL>
+</DL>
+
+<DT><B>-p, --path</B> BUS-PORT. ... .PORT
+
+<DD>
+Specify the path to the DFU device.
+<DT><B>-c, --cfg</B> CONFIG-NR
+
+<DD>
+Specify the configuration of the DFU device. Note that this is only used for matching, the configuration is not set by dfu-util.
+<DT><B>-i, --intf</B> INTF-NR
+
+<DD>
+Specify the DFU interface number.
+<DT><B>-a, --alt</B> ALT
+
+<DD>
+Specify the altsetting of the DFU interface by name or by number.
+<DT><B>-S, --serial</B> [<I>Run-Time SERIAL</I>][,[<I>DFU Mode SERIAL</I>]]
+
+<DD>
+Specify the run-time and DFU mode serial numbers used to further restrict
+device matches. If multiple, identical DFU devices are simultaneously
+connected to a system then vendor and product ID will be insufficient for
+targeting a single device. In this situation, it may be possible to use this
+parameter to specify a serial number which also must match.
+<P>
+If only a single serial number is specified, then the same serial number is
+used in both run-time and DFU mode. An empty serial number will match any
+serial number in the corresponding mode.
+<DT><B>-t, --transfer-size SIZE</B>
+
+<DD>
+Specify the number of bytes per USB transfer. The optimal value is
+usually determined automatically so this option is rarely useful. If
+you need to use this option for a device, please report it as a bug.
+<DT><B>-Z, --upload-size SIZE</B>
+
+<DD>
+Specify the expected upload size, in bytes.
+<DT><B>-U, --upload</B> FILE
+
+<DD>
+Read firmware from device into
+<B>FILE</B>.
+
+<DT><B>-D, --download</B> FILE
+
+<DD>
+Write firmware from
+<B>FILE</B>
+
+into device. When
+<B>FILE</B>
+
+is -, the firmware is read from stdin.
+<DT><B>-R, --reset</B>
+
+<DD>
+Issue USB reset signalling after upload or download has finished.
+<DT><B>-s, --dfuse-address</B> address
+
+<DD>
+Specify target address for raw binary download/upload on DfuSe devices. Do
+<B>not</B>
+
+use this for downloading DfuSe (.dfu) files. Modifiers can be added
+to the address, separated by a colon, to perform special DfuSE commands such
+as "leave" DFU mode, "unprotect" and "mass-erase" flash memory.
+<DT><B>-v, --verbose</B>
+
+<DD>
+Print more information about dfu-util's operation. A second
+<B>-v</B>
+
+will turn on verbose logging of USB requests. Repeat this option to further
+increase verbosity.
+<DT><B>-h, --help</B>
+
+<DD>
+Show a help text and exit.
+<DT><B>-V, --version</B>
+
+<DD>
+Show version information and exit.
+</DL>
+<A NAME="lbAF"> </A>
+<H2>EXAMPLES</H2>
+
+<A NAME="lbAG"> </A>
+<H3>Using dfu-util in the OpenMoko project</H3>
+
+(with the Neo1973 hardware)
+<P>
+
+Flashing the rootfs:
+<BR>
+
+<B> $ dfu-util -a rootfs -R -D /path/to/openmoko-devel-image.jffs2</B>
+
+<P>
+
+Flashing the kernel:
+<BR>
+
+<B> $ dfu-util -a kernel -R -D /path/to/uImage</B>
+
+<P>
+
+Flashing the bootloader:
+<BR>
+
+<B> $ dfu-util -a u-boot -R -D /path/to/u-boot.bin</B>
+
+<P>
+
+Copying a kernel into RAM:
+<BR>
+
+<B> $ dfu-util -a 0 -R -D /path/to/uImage</B>
+
+<P>
+Once this has finished, the kernel will be available at the default load
+address of 0x32000000 in Neo1973 RAM.
+<B>Note:</B>
+
+You cannot transfer more than 2MB of data into RAM using this method.
+<P>
+<A NAME="lbAH"> </A>
+<H3>Using dfu-util with a DfuSe device</H3>
+
+<P>
+
+Flashing a
+<B>.dfu</B>
+
+(special DfuSe format) file to the device:
+<BR>
+
+<B> $ dfu-util -a 0 -D /path/to/dfuse-image.dfu</B>
+
+<P>
+
+Reading out 1 KB of flash starting at address 0x8000000:
+<BR>
+
+<B> $ dfu-util -a 0 -s 0x08000000:1024 -U newfile.bin</B>
+
+<P>
+
+Flashing a binary file to address 0x8004000 of device memory and
+ask the device to leave DFU mode:
+<BR>
+
+<B> $ dfu-util -a 0 -s 0x08004000:leave -D /path/to/image.bin</B>
+
+
+<A NAME="lbAI"> </A>
+<H2>BUGS</H2>
+
+Please report any bugs to the dfu-util bug tracker at
+<B><A HREF="http://sourceforge.net/p/dfu-util/tickets/">http://sourceforge.net/p/dfu-util/tickets/</A></B>.
+
+Please use the
+<I>--verbose</I> option (repeated as necessary) to provide more
+
+information in your bug report.
+<A NAME="lbAJ"> </A>
+<H2>SEE ALSO</H2>
+
+The dfu-util home page is
+<B><A HREF="http://dfu-util.sourceforge.net">http://dfu-util.sourceforge.net</A></B>
+
+<A NAME="lbAK"> </A>
+<H2>HISTORY</H2>
+
+dfu-util was originally written for the OpenMoko project by
+Weston Schmidt <<A HREF="mailto:weston_schmidt@yahoo.com">weston_schmidt@yahoo.com</A>> and
+Harald Welte <<A HREF="mailto:hwelte@hmw-consulting.de">hwelte@hmw-consulting.de</A>>. Over time, nearly complete
+support of DFU 1.0, DFU 1.1 and DfuSe ("1.1a") has been added.
+<A NAME="lbAL"> </A>
+<H2>LICENCE</H2>
+
+<B>dfu-util</B>
+
+is covered by the GNU General Public License (GPL), version 2 or later.
+<A NAME="lbAM"> </A>
+<H2>COPYRIGHT</H2>
+
+This manual page was originally written by Uwe Hermann <<A HREF="mailto:uwe@hermann-uwe.de">uwe@hermann-uwe.de</A>>,
+and is now part of the dfu-util project.
+<P>
+
+<HR>
+<A NAME="index"> </A><H2>Index</H2>
+<DL>
+<DT><A HREF="#lbAB">NAME</A><DD>
+<DT><A HREF="#lbAC">SYNOPSIS</A><DD>
+<DT><A HREF="#lbAD">DESCRIPTION</A><DD>
+<DT><A HREF="#lbAE">OPTIONS</A><DD>
+<DT><A HREF="#lbAF">EXAMPLES</A><DD>
+<DL>
+<DT><A HREF="#lbAG">Using dfu-util in the OpenMoko project</A><DD>
+<DT><A HREF="#lbAH">Using dfu-util with a DfuSe device</A><DD>
+</DL>
+<DT><A HREF="#lbAI">BUGS</A><DD>
+<DT><A HREF="#lbAJ">SEE ALSO</A><DD>
+<DT><A HREF="#lbAK">HISTORY</A><DD>
+<DT><A HREF="#lbAL">LICENCE</A><DD>
+<DT><A HREF="#lbAM">COPYRIGHT</A><DD>
+</DL>
+<HR>
+This document was created by man2html,
+using the doc/dfu-util.1 manual page from dfu-util 0.8.<BR>
+Time: 14:40:57 GMT, September 13, 2014
+</BODY>
+</HTML>
--- /dev/null
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en-US">
+
+<head>
+ <title>DfuSe and dfu-util</title>
+ <meta http-equiv="content-type" content="application/xhtml+xml; charset=iso-8859-1" />
+ <meta name="author" content="Tormod Volden" />
+ <meta name="keywords" content="dfu-util, DfuSe, ST DFU extensions" />
+ <meta name="description" content="How to use dfu-util with DfuSe devices" />
+ <link rel="icon" type="image/png" href="favicon.ico" />
+ <link rel="stylesheet" type="text/css" href="simple.css" media="screen, print" />
+</head>
+
+<body>
+<div id="middlebox">
+ <h1>Using dfu-util with DfuSe devices</h1>
+ <h2>DfuSe</h2>
+ <p>
+ DfuSe (DFU with ST Microsystems extensions) is a protocol based on
+ DFU 1.1. However, in expanding the functionality of the DFU protocol,
+ ST Microsystems broke all compatibility with the DFU 1.1 standard.
+ DfuSe devices report the DFU version as "1.1a".
+ </p>
+ <p>
+ DfuSe can be used to download firmware and other data
+ from a host computer to a conforming device (or upload in the
+ opposite direction) over USB similar to standard DFU.
+ </p>
+ <p>
+ The main difference from standard DFU is that the target address in
+ the device (flash) memory is specified by the host, so that a
+ download can be performed to parts of the device memory. The host
+ program is also responsible for erasing flash pages before they
+ are written to.
+ </p>
+ <h2>.dfu files</h2>
+ <p>
+ A special file format is defined by ST Microsystems to carry firmware
+ for DfuSe devices. The file contains target information such as address
+ and alternate interface information in addition to the binary data.
+ Several blocks of binary data can be combined in one .dfu file.
+ </p>
+ <h2>Alternate interfaces</h2>
+ <p>
+ Different memory locations of the device may have different
+ characteristics that the host program (dfu-util) has to take
+ into considerations, such as flash memory page size, read-only
+ versus read-write segments, the need to erase, and so on.
+ These parameters are reported by the device in the string
+ descriptors meant for describing the USB interfaces.
+ The host program decodes these strings to build a memory map of
+ the device. Different memory units or address spaces are listed
+ in separate alternate interface settings that must be selected
+ according to the memory unit to access.
+ </p>
+ <p>
+ Note that dfu-util leaves it to the user to select alternate
+ interface. When parsing a .dfu file it will skip file segments
+ not matching the selected alternate interface. Also, some
+ DfuSe device firmware implementations ignore the setting of
+ alternate interface and deduct the memory unit from the
+ address, since they have no address space overlap.
+ </p>
+ <h2>DfuSe special commands</h2>
+ <p>
+ DfuSe special commands are used by the host program during normal
+ downloads or uploads, such as SET_ADDRESS and ERASE_PAGE. Also
+ the normal DFU_DNLOAD and DFU_UPLOAD commands have special
+ implementations in DfuSe.
+ Many DfuSe devices also support commands to leave DFU mode,
+ read unprotect the flash memory or mass erase the flash memory.
+ dfu-util (from version 0.7)
+ supports adding "leave", "unprotect", or "mass-erase"
+ to the -s option argument to send such requests in combination
+ with a download request. These modifiers are separated with a colon.
+ </p>
+ <p>
+ Some DfuSe devices have their DfuSe bootloader running from flash
+ memory. Erasing the whole flash memory would therefore destroy
+ the DfuSe bootloader itself and practically brick the device
+ for most users. Any use of modifiers such as "unprotect"
+ and "mass-erase" therefore needs to be combined with the "force"
+ modifer. This is not included in the examples, to not encourage
+ ignorant users to copy and paste such instructions and shoot
+ themselves in the foot.
+ </p>
+ <p>
+ Devices based on for instance STM32F103 all run the bootloader
+ from flash, since there is no USB bootloader in ROM.
+ </p>
+ <p>
+ For instance STM32F107, STM32F2xx and STM32F4xx devices have a
+ DfuSe bootloader in ROM, so the flash can be erased while
+ keeping the device available for USB DFU transfers as long
+ as the device designers use this built-in bootloader and have
+ not implemented another DfuSe bootloader in flash that the user is
+ dependent upon.
+ </p>
+ <p>
+ Well-written bootloaders running from flash will report their
+ own memory region as read-only and not eraseable, but this does
+ not prevent dfu-util from sending a "unprotect" or "mass-erase"
+ request which overrides this, if the user insists.
+ </p>
+ <h2>Example usage</h2>
+ <p>
+ Flashing a .dfu (special DfuSe format) file to the device:
+ </p>
+ <pre>
+ $ dfu-util -a 0 -D /path/to/dfuse-image.dfu
+ </pre>
+ <p>
+ Reading out 1 KB of flash starting at address 0x8000000:
+ </p>
+ <pre>
+ $ dfu-util -a 0 -s 0x08000000:1024 -U newfile.bin
+ </pre>
+ <p>
+ Flashing a binary file to address 0x8004000 of device memory and ask
+ the device to leave DFU mode:
+ </p>
+ <pre>
+ $ dfu-util -a 0 -s 0x08004000:leave -D /path/to/image.bin
+ </pre>
+ <p>
+ [<a href="index.html">Back to dfu-util main page</a>]
+ </p>
+ <p id="footer">
+ ©2012 Tormod Volden — Valid <a href="http://validator.w3.org/check?uri=referer" title="validate XHTML">XHTML</a> & <a href="http://jigsaw.w3.org/css-validator" title="validate CSS">CSS</a>
+ </p>
+</div>
+</body>
+</html>
--- /dev/null
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en-US">
+
+<head>
+ <title>dfu-util Homepage</title>
+ <meta http-equiv="content-type" content="application/xhtml+xml; charset=iso-8859-1" />
+ <meta name="author" content="Stefan Schmidt" />
+ <meta name="keywords" content="dfu-util, DFU, Device Firmware Upgrade, linux" />
+ <meta name="description" content="dfu-util Project Homepage" />
+ <link rel="icon" type="image/png" href="favicon.ico" />
+ <link rel="stylesheet" type="text/css" href="simple.css" media="screen, print" />
+</head>
+
+<body>
+<div id="middlebox">
+ <h1>dfu-util - Device Firmware Upgrade Utilities</h1>
+ <h2>Description</h2>
+ <p>
+ dfu-util is a host side implementation of the <a
+ href="http://www.usb.org/developers/devclass_docs/usbdfu10.pdf"
+ title="DFU revision 1.0"> DFU 1.0</a> and <a
+ href="http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf"
+ title="DFU revision 1.1">DFU 1.1</a> specifications of the USB forum.
+
+ DFU is intended to download and upload firmware to/from devices connected
+ over USB. It ranges from small devices like micro-controller boards
+ to mobile phones. Using dfu-util you can download firmware to your
+ DFU-enabled device or upload firmware from it. dfu-util has been
+ tested with the Openmoko Neo1973 and Freerunner and many other devices.
+ </p>
+ <p>
+ See the <a href="dfu-util.1.html">manual page</a> for examples of use.
+ </p>
+ <h2>Supported Devices</h2>
+ <ul>
+ <li><a href="http://wiki.openmoko.org/wiki/Neo_1973">Openmoko Neo1973</a></li>
+ <li><a href="http://wiki.openmoko.org/wiki/Neo_FreeRunner">Openmoko Freerunner</a></li>
+ <li><a href="http://leaflabs.com/Maple">Leaflabs Maple</a></li>
+ <li><a href="http://www.openpcd.org/">OpenPCD and OpenPICC</a></li>
+ <li><a href="http://downloads.qi-hardware.com/people/werner/wpan/web/">Qi Hardware ATUSB</a> (use dfu-util 0.7)</li>
+ <li><a href="http://bb.osmocom.org/trac/wiki/SIMtrace">Osmocom SIMtrace</a></li>
+ <li>Many devices using the <a href="dfuse.html">DfuSe DFU extension</a> from ST, for instance:
+ <ul>
+ <li><a
+href="http://www.seeedstudio.com/depot/micro-digital-storage-oscilloscopedso-nano-p-512.html">DSO nano</a></li>
+ <li><a href="https://www.particle.io/">Spark Core / Particle Photon</a></li>
+ <li>STM32F2/F3/F4 built-in bootloader</li>
+ <li>Some STR750-based devices, e.g. USB2CAN</li>
+ </ul></li>
+ </ul>
+ <h2>Releases</h2>
+ <p>
+ Releases of the dfu-util software can be found in the <a
+ href="http://dfu-util.sourceforge.net/releases/" title="Releases">
+ releases</a> folder.
+ The current release is 0.9.
+ </p>
+ <p>
+ We offer binaries for Microsoft Windows and some other platforms.
+ dfu-util uses libusb 1.0 to access your device, so
+ on Windows you have to register the device with the WinUSB driver
+ (alternatively libusb-win32 or libusbK), please see the <a
+ href="https://github.com/libusb/libusb/wiki/Windows#How_to_use_libusb_on_Windows">libusb wiki</a>
+ for more details.
+ </p>
+ <p>
+ Mac OS X users can also get dfu-util from <a href="http://brew.sh/">Homebrew</a> with "brew install dfu-util" or from <a href="http://www.macports.org/">MacPorts</a>.
+ </p>
+ <p>
+ Most Linux distributions ship dfu-util in binary packages for those
+ who do not want to compile dfu-util from source.
+ On Debian, Ubuntu, Fedora and Gentoo you can install it through the
+ normal software package tools. For other distributions
+(namely OpenSuSe, Mandriva, and CentOS) Holger Freyther was kind enough to
+provide binary packages through the <a
+ href="https://build.opensuse.org/package/show?package=dfu-util&project=home%3Azecke23">Open Build Service</a>.
+ </p>
+ <h2>Development</h2>
+ <p>
+ Development happens in a GIT repository. Browse it via the <a
+href="http://sourceforge.net/p/dfu-util/dfu-util/" title="Git repository">web
+interface</a> or clone it with:
+ </p>
+ <pre>
+ git clone git://git.code.sf.net/p/dfu-util/dfu-util
+ </pre>
+ <p>
+ See our <a href="build.html">build instructions</a> for how to
+ build the source on different platforms.
+ </p>
+ <h2>License</h2>
+ <p>
+ This software is licensed under the <a
+ href="http://www.gnu.org/licenses/gpl-2.0.html"> GPL version 2</a>.
+ </p>
+ <h2>Contact</h2>
+ <p>
+ If you have questions about the development or use of dfu-util please
+ use the <a href="http://sourceforge.net/p/dfu-util/tickets">bug tracker</a>
+ until we have reestablished our mailing list.
+ </p>
+ <h2>People</h2>
+ <p>
+ dfu-util was originally written by
+ Harald Welte partially based on code from <a
+ href="http://dfu-programmer.sourceforge.net/">
+ dfu-programmer 0.4</a> and is currently maintained by <a
+ href="http://www.datenfreihafen.org/">Stefan Schmidt</a> and
+ Tormod Volden.
+ </p>
+ <p id="footer">
+ ©2010-2016 Stefan Schmidt & Tormod Volden — Valid <a href="http://validator.w3.org/check?uri=referer" title="validate XHTML">XHTML</a> & <a href="http://jigsaw.w3.org/css-validator" title="validate CSS">CSS</a>
+ </p>
+</div>
+</body>
+</html>
--- /dev/null
+body {
+ margin: 10px;
+ font-size: 0.82em;
+ background-color: #EEE;
+}
+
+h1 {
+ clear: both;
+ padding: 0 0 12px 0;
+ margin: 0;
+ font-size: 2em;
+ font-weight: bold;
+}
+
+h2 {
+ clear: both;
+ margin: 0;
+ font-size: 1.5em;
+ font-weight: normal;
+}
+
+h3 {
+ clear: both;
+ margin: 15px 0 0 0;
+ font-size: 1.0em;
+ font-weight: bold;
+}
+
+p {
+ line-height: 20px;
+ padding: 8px 0 8px 0;
+ margin: 0;
+ font-size: 1.1em;
+}
+
+pre {
+ white-space: pre-wrap;
+ background-color: #CCC;
+ padding: 3px;
+}
+
+a:hover {
+ background-color: #DDD;
+}
+
+#middlebox {
+ width: 600px;
+ margin: 0px auto;
+ text-align: left;
+}
+
+#footer {
+ height: 100px;
+ padding: 28px 3px 0 0;
+ margin: 20px 0 20px 0;
+}
--- /dev/null
+Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
+Copyright © 2010-2012 Peter Stuge <peter@stuge.se>
+Copyright © 2008-2013 Nathan Hjelm <hjelmn@users.sourceforge.net>
+Copyright © 2009-2013 Pete Batard <pete@akeo.ie>
+Copyright © 2009-2013 Ludovic Rousseau <ludovic.rousseau@gmail.com>
+Copyright © 2010-2012 Michael Plante <michael.plante@gmail.com>
+Copyright © 2011-2013 Hans de Goede <hdegoede@redhat.com>
+Copyright © 2012-2013 Martin Pieuchot <mpi@openbsd.org>
+Copyright © 2012-2013 Toby Gray <toby.gray@realvnc.com>
+Copyright © 2013-2015 Chris Dickens <christopher.a.dickens@gmail.com>
+
+Other contributors:
+Akshay Jaggi
+Alan Ott
+Alan Stern
+Alex Vatchenko
+Andrew Fernandes
+Anthony Clay
+Antonio Ospite
+Artem Egorkine
+Aurelien Jarno
+Bastien Nocera
+Bei Zhang
+Benjamin Dobell
+Carl Karsten
+Colin Walters
+Dave Camarillo
+David Engraf
+David Moore
+Davidlohr Bueso
+Federico Manzan
+Felipe Balbi
+Florian Albrechtskirchinger
+Francesco Montorsi
+Francisco Facioni
+Gaurav Gupta
+Graeme Gill
+Gustavo Zacarias
+Hans Ulrich Niedermann
+Hector Martin
+Hoi-Ho Chan
+Ilya Konstantinov
+James Hanko
+John Sheu
+Joshua Blake
+Justin Bischoff
+Karsten Koenig
+Konrad Rzepecki
+Kuangye Guo
+Lars Kanis
+Lars Wirzenius
+Luca Longinotti
+Marcus Meissner
+Markus Heidelberg
+Martin Ettl
+Martin Koegler
+Matthias Bolte
+Mike Frysinger
+Mikhail Gusarov
+Moritz Fischer
+Ларионов Даниил
+Nicholas Corgan
+Omri Iluz
+Orin Eman
+Paul Fertser
+Pekka Nikander
+Rob Walker
+Sean McBride
+Sebastian Pipping
+Simon Haggett
+Simon Newton
+Thomas Röfer
+Tim Hutt
+Tim Roberts
+Tobias Klauser
+Toby Peterson
+Tormod Volden
+Trygve Laugstøl
+Uri Lublin
+Vasily Khoruzhick
+Vegard Storheil Eriksen
+Venkatesh Shukla
+Vitali Lovich
+Xiaofan Chen
+Zoltán Kovács
+Роман Донченко
+parafin
+xantares
--- /dev/null
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL. It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+ This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it. You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+ When we speak of free software, we are referring to freedom of use,
+not price. Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+ To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights. These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+ For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you. You must make sure that they, too, receive or can get the source
+code. If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it. And you must show them these terms so they know their rights.
+
+ We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+ To protect each distributor, we want to make it very clear that
+there is no warranty for the free library. Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+\f
+ Finally, software patents pose a constant threat to the existence of
+any free program. We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder. Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+ Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License. This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License. We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+ When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library. The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom. The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+ We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License. It also provides other free software developers Less
+of an advantage over competing non-free programs. These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries. However, the Lesser license provides advantages in certain
+special circumstances.
+
+ For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard. To achieve this, non-free programs must be
+allowed to use the library. A more frequent case is that a free
+library does the same job as widely used non-free libraries. In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+ In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software. For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+ Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+ The precise terms and conditions for copying, distribution and
+modification follow. Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library". The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+\f
+ GNU LESSER GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+ A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+ The "Library", below, refers to any such software library or work
+which has been distributed under these terms. A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language. (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+ "Source code" for a work means the preferred form of the work for
+making modifications to it. For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+ Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it). Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+ 1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+ You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+\f
+ 2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) The modified work must itself be a software library.
+
+ b) You must cause the files modified to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ c) You must cause the whole of the work to be licensed at no
+ charge to all third parties under the terms of this License.
+
+ d) If a facility in the modified Library refers to a function or a
+ table of data to be supplied by an application program that uses
+ the facility, other than as an argument passed when the facility
+ is invoked, then you must make a good faith effort to ensure that,
+ in the event an application does not supply such function or
+ table, the facility still operates, and performs whatever part of
+ its purpose remains meaningful.
+
+ (For example, a function in a library to compute square roots has
+ a purpose that is entirely well-defined independent of the
+ application. Therefore, Subsection 2d requires that any
+ application-supplied function or table used by this function must
+ be optional: if the application does not supply it, the square
+ root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library. To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License. (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.) Do not make any other change in
+these notices.
+\f
+ Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+ This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+ 4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+ If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library". Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+ However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library". The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+ When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library. The
+threshold for this to be true is not precisely defined by law.
+
+ If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work. (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+ Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+\f
+ 6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+ You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License. You must supply a copy of this License. If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License. Also, you must do one
+of these things:
+
+ a) Accompany the work with the complete corresponding
+ machine-readable source code for the Library including whatever
+ changes were used in the work (which must be distributed under
+ Sections 1 and 2 above); and, if the work is an executable linked
+ with the Library, with the complete machine-readable "work that
+ uses the Library", as object code and/or source code, so that the
+ user can modify the Library and then relink to produce a modified
+ executable containing the modified Library. (It is understood
+ that the user who changes the contents of definitions files in the
+ Library will not necessarily be able to recompile the application
+ to use the modified definitions.)
+
+ b) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (1) uses at run time a
+ copy of the library already present on the user's computer system,
+ rather than copying library functions into the executable, and (2)
+ will operate properly with a modified version of the library, if
+ the user installs one, as long as the modified version is
+ interface-compatible with the version that the work was made with.
+
+ c) Accompany the work with a written offer, valid for at
+ least three years, to give the same user the materials
+ specified in Subsection 6a, above, for a charge no more
+ than the cost of performing this distribution.
+
+ d) If distribution of the work is made by offering access to copy
+ from a designated place, offer equivalent access to copy the above
+ specified materials from the same place.
+
+ e) Verify that the user has already received a copy of these
+ materials or that you have already sent this user a copy.
+
+ For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it. However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+ It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system. Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+\f
+ 7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+ a) Accompany the combined library with a copy of the same work
+ based on the Library, uncombined with any other library
+ facilities. This must be distributed under the terms of the
+ Sections above.
+
+ b) Give prominent notice with the combined library of the fact
+ that part of it is a work based on the Library, and explaining
+ where to find the accompanying uncombined form of the same work.
+
+ 8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License. Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License. However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+ 9. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Library or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+ 10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+\f
+ 11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all. For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded. In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+ 13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation. If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+\f
+ 14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission. For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this. Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+ NO WARRANTY
+
+ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Libraries
+
+ If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change. You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+ To apply these terms, attach the following notices to the library. It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the library's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+ <signature of Ty Coon>, 1 April 1990
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
--- /dev/null
+For detailed information about the changes below, please see the git log or
+visit: http://log.libusb.info
+
+2015-09-13: v1.0.20
+* Add Haiku support
+* Fix multiple memory and resource leaks (#16, #52, #76, #81)
+* Fix possible deadlock when executing transfer callback
+* New libusb_free_pollfds() API
+* Darwin: Fix devices not being detected on OS X 10.8 (#48)
+* Linux: Allow larger isochronous transfer submission (#23)
+* Windows: Fix broken builds Cygwin/MinGW builds and compiler warnings
+* Windows: Fix broken bus number lookup
+* Windows: Improve submission of control requests for composite devices
+* Examples: Add two-stage load support to fxload (#12)
+* Correctly report cancellations due to timeouts
+* Improve efficiency of event handling
+* Improve speed of transfer submission in multi-threaded environments
+* Various other bug fixes and improvements
+The (#xx) numbers are libusb issue numbers, see ie:
+https://github.com/libusb/libusb/issues/16
+
+2014-05-30: v1.0.19
+* Add support for USB bulk streams on Linux and Mac OS X (#11)
+* Windows: Add AMD and Intel USB-3.0 root hub support
+* Windows: Fix USB 3.0 speed detection on Windows 8 or later (#10)
+* Added Russian translation for libusb_strerror strings
+* All: Various small fixes and cleanups
+
+2014-01-25: v1.0.18
+* Fix multiple memory leaks
+* Fix a crash when HID transfers return no data on Windows
+* Ensure all pending events are consumed
+* Improve Android and ucLinux support
+* Multiple Windows improvements (error logging, VS2013, VIA xHCI support)
+* Multiple OS X improvements (broken compilation, SIGFPE, 64bit support)
+
+2013-09-06: v1.0.17
+* Hotplug callbacks now always get passed a libusb_context, even if it is
+ the default context. Previously NULL would be passed for the default context,
+ but since the first context created is the default context, and most apps
+ use only 1 context, this meant that apps explicitly creating a context would
+ still get passed NULL
+* Android: Add .mk files to build with the Android NDK
+* Darwin: Add Xcode project
+* Darwin: Fix crash on unplug (#121)
+* Linux: Fix hang (deadlock) on libusb_exit
+* Linux: Fix libusb build failure with --disable-udev (#124)
+* Linux: Fix libusb_get_device_list() hang with --disable-udev (#130)
+* OpenBSD: Update OpenBSD backend with support for control transfers to
+ non-ugen(4) devices and make get_configuration() no longer generate I/O.
+ Note that using this libusb version on OpenBSD requires using
+ OpenBSD 5.3-current or later. Users of older OpenBSD versions are advised
+ to stay with the libusb shipped with OpenBSD (mpi)
+* Windows: fix libusb_dll_2010.vcxproj link errors (#129)
+* Various other bug fixes and improvements
+
+2013-07-11: v1.0.16
+* Add hotplug support for Darwin and Linux (#9)
+* Add superspeed endpoint companion descriptor support (#15)
+* Add BOS descriptor support (#15)
+* Make descriptor parsing code more robust
+* New libusb_get_port_numbers API, this is libusb_get_port_path without
+ the unnecessary context parameter, libusb_get_port_path is now deprecated
+* New libusb_strerror API (#14)
+* New libusb_set_auto_detach_kernel_driver API (#17)
+* Improve topology API docs (#95)
+* Logging now use a single write call per log-message, avoiding log-message
+ "interlacing" when using multiple threads.
+* Android: use Android logging when building on Android (#101)
+* Darwin: make libusb_reset reenumerate device on descriptors change (#89)
+* Darwin: add support for the LIBUSB_TRANSFER_ADD_ZERO_PACKET flag (#91)
+* Darwin: add a device cache (#112, #114)
+* Examples: Add sam3u_benchmark isochronous example by Harald Welte (#109)
+* Many other bug fixes and improvements
+The (#xx) numbers are libusbx issue numbers, see ie:
+https://github.com/libusbx/libusbx/issues/9
+
+2013-04-15: v1.0.15
+* Improve transfer cancellation and avoid short read failures on broken descriptors
+* Filter out 8-bit characters in libusb_get_string_descriptor_ascii()
+* Add WinCE support
+* Add library stress tests
+* Add Cypress FX3 firmware upload support for fxload sample
+* Add HID and kernel driver detach support capabilities detection
+* Add SuperSpeed detection on OS X
+* Fix bInterval value interpretation on OS X
+* Fix issues with autoclaim, composite HID devices, interface autoclaim and
+ early abort in libusb_close() on Windows. Also add VS2012 solution files.
+* Improve fd event handling on Linux
+* Other bug fixes and improvements
+
+2012-09-26: v1.0.14
+* Reverts the previous API change with regards to bMaxPower.
+ If this doesn't matter to you, you are encouraged to keep using v1.0.13,
+ as it will use the same attribute as v2.0, to be released soon.
+* Note that LIBUSB_API_VERSION is *decreased* to 0x010000FF and the previous
+ guidelines with regards to concurrent use of MaxPower/bMaxPower still apply.
+
+2012-09-20: v1.0.13
+* [MAJOR] Fix a typo in the API with struct libusb_config_descriptor where
+ MaxPower was used instead of bMaxPower, as defined in the specs. If your
+ application was accessing the MaxPower attribute, and you need to maintain
+ compatibility with libusb or older versions, see APPENDIX A below.
+* Fix broken support for the 0.1 -> 1.0 libusb-compat layer
+* Fix unwanted cancellation of pending timeouts as well as major timeout related bugs
+* Fix handling of HID and composite devices on Windows
+* Introduce LIBUSB_API_VERSION macro
+* Add Cypress FX/FX2 firmware upload sample, based on fxload from
+ http://linux-hotplug.sourceforge.net
+* Add libusb0 (libusb-win32) and libusbK driver support on Windows. Note that while
+ the drivers allow it, isochronous transfers are not supported yet in libusb. Also
+ not supported yet is the use of libusb-win32 filter drivers on composite interfaces
+* Add support for the new get_capabilities ioctl on Linux and avoid unnecessary
+ splitting of bulk transfers
+* Improve support for newer Intel and Renesas USB 3.0 controllers on Windows
+* Harmonize the device number for root hubs across platforms
+* Other bug fixes and improvements
+
+2012-06-15: v1.0.12
+* Fix a potential major regression with pthread on Linux
+* Fix missing thread ID from debug log output on cygwin
+* Fix possible crash when using longjmp and MinGW's gcc 4.6
+* Add topology calls: libusb_get_port_number(), libusb_get_parent() & libusb_get_port_path()
+* Add toggleable debug, using libusb_set_debug() or the LIBUSB_DEBUG environment variable
+* Define log levels in libusb.h and set timestamp origin to first libusb_init() call
+* All logging is now sent to to stderr (info was sent to stdout previously)
+* Update log messages severity and avoid polluting log output on OS-X
+* Add HID driver support on Windows
+* Enable interchangeability of MSVC and MinGW DLLs
+* Additional bug fixes and improvements
+
+2012-05-08: v1.0.11
+* Revert removal of critical Windows event handling that was introduced in 1.0.10
+* Fix a possible deadlock in Windows when submitting transfers
+* Add timestamped logging
+* Add NetBSD support (experimental) and BSD libusb_get_device_speed() data
+* Add bootstrap.sh alongside autogen.sh (bootstrap.sh doesn't invoke configure)
+* Search for device nodes in /dev for Android support
+* Other bug fixes
+
+2012-04-17: v1.0.10
+* Public release
+* Add libusb_get_version
+* Add Visual Studio 2010 project files
+* Some Windows code cleanup
+* Fix xusb sample warnings
+
+2012-04-02: v1.0.9
+* First libusbx release
+* Add libusb_get_device_speed (all, except BSD) and libusb_error_name
+* Add Windows support (WinUSB driver only)
+* Add OpenBSD support
+* Add xusb sample
+* Tons of bug fixes
+
+2010-05-07: v1.0.8
+* Bug fixes
+
+2010-04-19: v1.0.7
+* Bug fixes and documentation tweaks
+* Add more interface class definitions
+
+2009-11-22: v1.0.6
+* Bug fixes
+* Increase libusb_handle_events() timeout to 60s for powersaving
+
+2009-11-15: v1.0.5
+ * Use timerfd when available for timer management
+ * Small fixes/updates
+
+2009-11-06: v1.0.4 release
+ * Bug fixes including transfer locking to fix some potential threading races
+ * More flexibility with clock types on Linux
+ * Use new bulk continuation tracking in Linux 2.6.32 for improved handling
+ of short/failed transfers
+
+2009-08-27: v1.0.3 release
+ * Bug fixes
+ * Add libusb_get_max_iso_packet_size()
+
+2009-06-13: v1.0.2 release
+ * Bug fixes
+
+2009-05-12: v1.0.1 release
+ * Bug fixes
+ * Darwin backend
+
+2008-12-13: v1.0.0 release
+ * Bug fixes
+
+2008-11-21: v0.9.4 release
+ * Bug fixes
+ * Add libusb_attach_kernel_driver()
+
+2008-08-23: v0.9.3 release
+ * Bug fixes
+
+2008-07-19: v0.9.2 release
+ * Bug fixes
+
+2008-06-28: v0.9.1 release
+ * Bug fixes
+ * Introduce contexts to the API
+ * Compatibility with new Linux kernel features
+
+2008-05-25: v0.9.0 release
+ * First libusb-1.0 beta release
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+APPENDIX A - How to maintain code compatibility with versions of libusb and
+libusb that use MaxPower:
+
+If you must to maintain compatibility with versions of the library that aren't
+using the bMaxPower attribute in struct libusb_config_descriptor, the
+recommended way is to use the new LIBUSB_API_VERSION macro with an #ifdef.
+For instance, if your code was written as follows:
+
+ if (dev->config[0].MaxPower < 250)
+
+Then you should modify it to have:
+
+#if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01000100)
+ if (dev->config[0].bMaxPower < 250)
+#else
+ if (dev->config[0].MaxPower < 250)
+#endif
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+AUTOMAKE_OPTIONS = dist-bzip2 no-dist-gzip
+ACLOCAL_AMFLAGS = -I m4
+DISTCLEANFILES = libusb-1.0.pc
+EXTRA_DIST = TODO PORTING msvc libusb/libusb-1.0.def libusb/version_nano.h \
+ examples/getopt/getopt.c examples/getopt/getopt1.c examples/getopt/getopt.h \
+ android Xcode
+SUBDIRS = libusb doc
+
+if BUILD_EXAMPLES
+SUBDIRS += examples
+endif
+
+if BUILD_TESTS
+SUBDIRS += tests
+endif
+
+pkgconfigdir=$(libdir)/pkgconfig
+pkgconfig_DATA=libusb-1.0.pc
+
+.PHONY: dist-up
+
+reldir = .release/$(distdir)
+dist-up: dist
+ rm -rf $(reldir)
+ mkdir -p $(reldir)
+ cp $(distdir).tar.bz2 $(reldir)
+ rsync -rv $(reldir) frs.sourceforge.net:/home/frs/project/l/li/libusb/libusb-1.0/
+ rm -rf $(reldir)
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@BUILD_EXAMPLES_TRUE@am__append_1 = examples
+@BUILD_TESTS_TRUE@am__append_2 = tests
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/libusb/version.h $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = libusb-1.0.pc
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = libusb doc examples tests
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(srcdir)/libusb-1.0.pc.in AUTHORS COPYING ChangeLog INSTALL \
+ NEWS README TODO compile config.guess config.sub depcomp \
+ install-sh ltmain.sh missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.bz2
+DIST_TARGETS = dist-bzip2
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLDFLAGS = @LTLDFLAGS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OS_DARWIN = @OS_DARWIN@
+OS_HAIKU = @OS_HAIKU@
+OS_LINUX = @OS_LINUX@
+OS_NETBSD = @OS_NETBSD@
+OS_OPENBSD = @OS_OPENBSD@
+OS_WINDOWS = @OS_WINDOWS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_UDEV = @USE_UDEV@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = dist-bzip2 no-dist-gzip
+ACLOCAL_AMFLAGS = -I m4
+DISTCLEANFILES = libusb-1.0.pc
+EXTRA_DIST = TODO PORTING msvc libusb/libusb-1.0.def libusb/version_nano.h \
+ examples/getopt/getopt.c examples/getopt/getopt1.c examples/getopt/getopt.h \
+ android Xcode
+
+SUBDIRS = libusb doc $(am__append_1) $(am__append_2)
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libusb-1.0.pc
+reldir = .release/$(distdir)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+libusb-1.0.pc: $(top_builddir)/config.status $(srcdir)/libusb-1.0.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+ dist-xz dist-zip distcheck distclean distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-pkgconfigDATA \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am uninstall-pkgconfigDATA
+
+.PRECIOUS: Makefile
+
+
+.PHONY: dist-up
+dist-up: dist
+ rm -rf $(reldir)
+ mkdir -p $(reldir)
+ cp $(distdir).tar.bz2 $(reldir)
+ rsync -rv $(reldir) frs.sourceforge.net:/home/frs/project/l/li/libusb/libusb-1.0/
+ rm -rf $(reldir)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+For the latest libusb news, please refer to the ChangeLog file, or visit:
+http://libusb.info
--- /dev/null
+PORTING LIBUSB TO OTHER PLATFORMS
+
+Introduction
+============
+
+This document is aimed at developers wishing to port libusb to unsupported
+platforms. I believe the libusb API is OS-independent, so by supporting
+multiple operating systems we pave the way for cross-platform USB device
+drivers.
+
+Implementation-wise, the basic idea is that you provide an interface to
+libusb's internal "backend" API, which performs the appropriate operations on
+your target platform.
+
+In terms of USB I/O, your backend provides functionality to submit
+asynchronous transfers (synchronous transfers are implemented in the higher
+layers, based on the async interface). Your backend must also provide
+functionality to cancel those transfers.
+
+Your backend must also provide an event handling function to "reap" ongoing
+transfers and process their results.
+
+The backend must also provide standard functions for other USB operations,
+e.g. setting configuration, obtaining descriptors, etc.
+
+
+File descriptors for I/O polling
+================================
+
+For libusb to work, your event handling function obviously needs to be called
+at various points in time. Your backend must provide a set of file descriptors
+which libusb and its users can pass to poll() or select() to determine when
+it is time to call the event handling function.
+
+On Linux, this is easy: the usbfs kernel interface exposes a file descriptor
+which can be passed to poll(). If something similar is not true for your
+platform, you can emulate this using an internal library thread to reap I/O as
+necessary, and a pipe() with the main library to raise events. The file
+descriptor of the pipe can then be provided to libusb as an event source.
+
+
+Interface semantics and documentation
+=====================================
+
+Documentation of the backend interface can be found in libusbi.h inside the
+usbi_os_backend structure definition.
+
+Your implementations of these functions will need to call various internal
+libusb functions, prefixed with "usbi_". Documentation for these functions
+can be found in the .c files where they are implemented.
+
+You probably want to skim over *all* the documentation before starting your
+implementation. For example, you probably need to allocate and store private
+OS-specific data for device handles, but the documentation for the mechanism
+for doing so is probably not the first thing you will see.
+
+The Linux backend acts as a good example - view it as a reference
+implementation which you should try to match the behaviour of.
+
+
+Getting started
+===============
+
+1. Modify configure.ac to detect your platform appropriately (see the OS_LINUX
+stuff for an example).
+
+2. Implement your backend in the libusb/os/ directory, modifying
+libusb/os/Makefile.am appropriately.
+
+3. Add preprocessor logic to the top of libusb/core.c to statically assign the
+right usbi_backend for your platform.
+
+4. Produce and test your implementation.
+
+5. Send your implementation to libusb-devel mailing list.
+
+
+Implementation difficulties? Questions?
+=======================================
+
+If you encounter difficulties porting libusb to your platform, please raise
+these issues on the libusb-devel mailing list. Where possible and sensible, I
+am interested in solving problems preventing libusb from operating on other
+platforms.
+
+The libusb-devel mailing list is also a good place to ask questions and
+make suggestions about the internal API. Hopefully we can produce some
+better documentation based on your questions and other input.
+
+You are encouraged to get involved in the process; if the library needs
+some infrastructure additions/modifications to better support your platform,
+you are encouraged to make such changes (in cleanly distinct patch
+submissions). Even if you do not make such changes yourself, please do raise
+the issues on the mailing list at the very minimum.
--- /dev/null
+libusb
+======
+
+libusb is a library for USB device access from Linux, Mac OS X,
+Windows, OpenBSD/NetBSD and Haiku userspace.
+It is written in C (Haiku backend in C++) and licensed under the GNU
+Lesser General Public License version 2.1 or, at your option, any later
+version (see COPYING).
+
+libusb is abstracted internally in such a way that it can hopefully
+be ported to other operating systems. Please see the PORTING file
+for more information.
+
+libusb homepage:
+http://libusb.info/
+
+Developers will wish to consult the API documentation:
+http://api.libusb.info
+
+Use the mailing list for questions, comments, etc:
+http://mailing-list.libusb.info
+
+- Pete Batard <pete@akeo.ie>
+- Hans de Goede <hdegoede@redhat.com>
+- Xiaofan Chen <xiaofanc@gmail.com>
+- Ludovic Rousseau <ludovic.rousseau@gmail.com>
+- Nathan Hjelm <hjelmn@users.sourceforge.net>
+- Chris Dickens <christopher.a.dickens@gmail.com>
+(Please use the mailing list rather than mailing developers directly)
--- /dev/null
+Please see the libusb roadmap by visiting:
+https://github.com/libusb/libusb/issues/milestones?direction=asc&sort=due_date
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+// libusb does not follow C99 strict aliasing rules, so disable it.
+GCC_STRICT_ALIASING = NO
+
+// Use C99 dialect.
+GCC_C_LANGUAGE_STANDARD = c99
+
+// Compiler warnings.
+GCC_WARN_64_TO_32_BIT_CONVERSION = YES
+GCC_WARN_ABOUT_RETURN_TYPE = YES
+GCC_WARN_UNINITIALIZED_AUTOS = YES
+GCC_WARN_FOUR_CHARACTER_CONSTANTS = YES
+GCC_WARN_SHADOW = YES
+GCC_WARN_INITIALIZER_NOT_FULLY_BRACKETED = YES
+GCC_WARN_ABOUT_MISSING_FIELD_INITIALIZERS = YES
+GCC_WARN_ABOUT_MISSING_PROTOTYPES = YES
+GCC_WARN_ABOUT_MISSING_NEWLINE = YES
+GCC_WARN_UNKNOWN_PRAGMAS = YES
+GCC_WARN_UNUSED_FUNCTION = YES
+GCC_WARN_UNUSED_LABEL = YES
+GCC_WARN_UNUSED_VARIABLE = YES
+CLANG_WARN_EMPTY_BODY = YES
+CLANG_WARN_CONSTANT_CONVERSION = YES
+CLANG_WARN_ENUM_CONVERSION = YES
+CLANG_WARN_INT_CONVERSION = YES
+CLANG_WARN_DOCUMENTATION_COMMENTS = YES
+CLANG_WARN_BOOL_CONVERSION = YES
+
+// Static analyzer warnings.
+CLANG_ANALYZER_SECURITY_FLOATLOOPCOUNTER = YES
+CLANG_ANALYZER_SECURITY_INSECUREAPI_RAND = YES
--- /dev/null
+/* config.h. Manually generated for Xcode. */
+
+/* Default visibility */
+#define DEFAULT_VISIBILITY /**/
+
+/* Message logging */
+#define ENABLE_LOGGING 1
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define to 1 if you have the <poll.h> header file. */
+#define HAVE_POLL_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Darwin backend */
+#define OS_DARWIN 1
+
+/* type of second poll() argument */
+#define POLL_NFDS_TYPE nfds_t
+
+/* Use POSIX Threads */
+#define THREADS_POSIX 1
+
+/* Use GNU extensions */
+#define _GNU_SOURCE 1
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+#include "common.xcconfig"
+
+// Embed debug symbols in binary itself.
+DEBUG_INFORMATION_FORMAT = dwarf
+
+// No optimizations in debug.
+GCC_OPTIMIZATION_LEVEL = 0
+
+//
+GCC_PREPROCESSOR_DEFINITIONS = $(inherited) DEBUG=1
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+PRODUCT_NAME = libusb-1.0.0
+LD_DYLIB_INSTALL_NAME = @rpath/libusb-1.0.0.dylib
--- /dev/null
+// !$*UTF8*$!
+{
+ archiveVersion = 1;
+ classes = {
+ };
+ objectVersion = 45;
+ objects = {
+
+/* Begin PBXAggregateTarget section */
+ 008FC0321628BC9400BC5BE2 /* all */ = {
+ isa = PBXAggregateTarget;
+ buildConfigurationList = 008FC0331628BC9400BC5BE2 /* Build configuration list for PBXAggregateTarget "all" */;
+ buildPhases = (
+ );
+ dependencies = (
+ 008FC0371628BC9A00BC5BE2 /* PBXTargetDependency */,
+ 008FC0391628BC9A00BC5BE2 /* PBXTargetDependency */,
+ 008FC03B1628BC9A00BC5BE2 /* PBXTargetDependency */,
+ 008FC03D1628BC9A00BC5BE2 /* PBXTargetDependency */,
+ 008FC03F1628BC9A00BC5BE2 /* PBXTargetDependency */,
+ 008FC0411628BC9A00BC5BE2 /* PBXTargetDependency */,
+ );
+ name = all;
+ productName = all;
+ };
+/* End PBXAggregateTarget section */
+
+/* Begin PBXBuildFile section */
+ 008FBF861628B7E800BC5BE2 /* core.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF541628B7E800BC5BE2 /* core.c */; };
+ 008FBF871628B7E800BC5BE2 /* descriptor.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF551628B7E800BC5BE2 /* descriptor.c */; };
+ 008FBF881628B7E800BC5BE2 /* io.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF561628B7E800BC5BE2 /* io.c */; };
+ 008FBF891628B7E800BC5BE2 /* libusb.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF5A1628B7E800BC5BE2 /* libusb.h */; };
+ 008FBF901628B7E800BC5BE2 /* libusbi.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF671628B7E800BC5BE2 /* libusbi.h */; };
+ 008FBF921628B7E800BC5BE2 /* darwin_usb.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF6C1628B7E800BC5BE2 /* darwin_usb.c */; };
+ 008FBF931628B7E800BC5BE2 /* darwin_usb.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF6D1628B7E800BC5BE2 /* darwin_usb.h */; };
+ 008FBF971628B7E800BC5BE2 /* poll_posix.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF711628B7E800BC5BE2 /* poll_posix.h */; };
+ 008FBF9A1628B7E800BC5BE2 /* threads_posix.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF741628B7E800BC5BE2 /* threads_posix.c */; };
+ 008FBF9B1628B7E800BC5BE2 /* threads_posix.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF751628B7E800BC5BE2 /* threads_posix.h */; };
+ 008FBFA01628B7E800BC5BE2 /* sync.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBF7A1628B7E800BC5BE2 /* sync.c */; };
+ 008FBFA11628B7E800BC5BE2 /* version.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF7B1628B7E800BC5BE2 /* version.h */; };
+ 008FBFA21628B7E800BC5BE2 /* version_nano.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBF7C1628B7E800BC5BE2 /* version_nano.h */; };
+ 008FBFA51628B84200BC5BE2 /* config.h in Headers */ = {isa = PBXBuildFile; fileRef = 008FBFA41628B84200BC5BE2 /* config.h */; };
+ 008FBFA71628B87000BC5BE2 /* CoreFoundation.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBFA61628B87000BC5BE2 /* CoreFoundation.framework */; };
+ 008FBFA91628B88000BC5BE2 /* IOKit.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBFA81628B88000BC5BE2 /* IOKit.framework */; };
+ 008FBFAB1628B8CB00BC5BE2 /* libobjc.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBFAA1628B8CB00BC5BE2 /* libobjc.dylib */; };
+ 008FBFEF1628BA3500BC5BE2 /* xusb.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFED1628BA0E00BC5BE2 /* xusb.c */; };
+ 008FBFF01628BA3A00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */; };
+ 008FBFFF1628BB9600BC5BE2 /* dpfp.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFD71628BA0E00BC5BE2 /* dpfp.c */; };
+ 008FC0001628BBCD00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */; };
+ 008FC00F1628BBE400BC5BE2 /* dpfp_threaded.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFDB1628BA0E00BC5BE2 /* dpfp_threaded.c */; };
+ 008FC0101628BBE900BC5BE2 /* libusb-1.0.0.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */; };
+ 008FC01F1628BC1500BC5BE2 /* fxload.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFE11628BA0E00BC5BE2 /* fxload.c */; };
+ 008FC0201628BC1B00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */; };
+ 008FC0211628BC5200BC5BE2 /* ezusb.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFDC1628BA0E00BC5BE2 /* ezusb.c */; };
+ 008FC0301628BC7400BC5BE2 /* listdevs.c in Sources */ = {isa = PBXBuildFile; fileRef = 008FBFE71628BA0E00BC5BE2 /* listdevs.c */; };
+ 008FC0311628BC7800BC5BE2 /* libusb-1.0.0.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */; };
+ 1438D77A17A2ED9F00166101 /* hotplug.c in Sources */ = {isa = PBXBuildFile; fileRef = 1438D77817A2ED9F00166101 /* hotplug.c */; };
+ 1438D77B17A2ED9F00166101 /* hotplug.h in Headers */ = {isa = PBXBuildFile; fileRef = 1438D77917A2ED9F00166101 /* hotplug.h */; };
+ 1438D77D17A2EDCD00166101 /* poll_posix.c in Sources */ = {isa = PBXBuildFile; fileRef = 1438D77C17A2EDCD00166101 /* poll_posix.c */; };
+ 1438D77F17A2F0EA00166101 /* strerror.c in Sources */ = {isa = PBXBuildFile; fileRef = 1438D77E17A2F0EA00166101 /* strerror.c */; };
+/* End PBXBuildFile section */
+
+/* Begin PBXContainerItemProxy section */
+ 008FC0361628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+ 008FC0381628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBFBC1628B9FE00BC5BE2;
+ remoteInfo = xusb;
+ };
+ 008FC03A1628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBFF41628BB8B00BC5BE2;
+ remoteInfo = dpfp;
+ };
+ 008FC03C1628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FC0041628BBDB00BC5BE2;
+ remoteInfo = dpfp_threaded;
+ };
+ 008FC03E1628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FC0141628BC0300BC5BE2;
+ remoteInfo = fxload;
+ };
+ 008FC0401628BC9A00BC5BE2 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FC0251628BC6B00BC5BE2;
+ remoteInfo = listdevs;
+ };
+ 1443EE8B1641926D007E0579 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+ 1443EE8D16419273007E0579 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+ 1443EE8F16419276007E0579 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+ 1443EE911641927A007E0579 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+ 1443EE931641927D007E0579 /* PBXContainerItemProxy */ = {
+ isa = PBXContainerItemProxy;
+ containerPortal = 008FBF281628B79300BC5BE2 /* Project object */;
+ proxyType = 1;
+ remoteGlobalIDString = 008FBF301628B79300BC5BE2;
+ remoteInfo = libusb;
+ };
+/* End PBXContainerItemProxy section */
+
+/* Begin PBXCopyFilesBuildPhase section */
+ 008FBFBB1628B9FE00BC5BE2 /* CopyFiles */ = {
+ isa = PBXCopyFilesBuildPhase;
+ buildActionMask = 2147483647;
+ dstPath = /usr/share/man/man1/;
+ dstSubfolderSpec = 0;
+ files = (
+ );
+ runOnlyForDeploymentPostprocessing = 1;
+ };
+ 008FBFF31628BB8B00BC5BE2 /* CopyFiles */ = {
+ isa = PBXCopyFilesBuildPhase;
+ buildActionMask = 2147483647;
+ dstPath = /usr/share/man/man1/;
+ dstSubfolderSpec = 0;
+ files = (
+ );
+ runOnlyForDeploymentPostprocessing = 1;
+ };
+ 008FC0031628BBDB00BC5BE2 /* CopyFiles */ = {
+ isa = PBXCopyFilesBuildPhase;
+ buildActionMask = 2147483647;
+ dstPath = /usr/share/man/man1/;
+ dstSubfolderSpec = 0;
+ files = (
+ );
+ runOnlyForDeploymentPostprocessing = 1;
+ };
+ 008FC0131628BC0300BC5BE2 /* CopyFiles */ = {
+ isa = PBXCopyFilesBuildPhase;
+ buildActionMask = 2147483647;
+ dstPath = /usr/share/man/man1/;
+ dstSubfolderSpec = 0;
+ files = (
+ );
+ runOnlyForDeploymentPostprocessing = 1;
+ };
+ 008FC0241628BC6B00BC5BE2 /* CopyFiles */ = {
+ isa = PBXCopyFilesBuildPhase;
+ buildActionMask = 2147483647;
+ dstPath = /usr/share/man/man1/;
+ dstSubfolderSpec = 0;
+ files = (
+ );
+ runOnlyForDeploymentPostprocessing = 1;
+ };
+/* End PBXCopyFilesBuildPhase section */
+
+/* Begin PBXFileReference section */
+ 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.dylib"; includeInIndex = 0; path = "libusb-1.0.0.dylib"; sourceTree = BUILT_PRODUCTS_DIR; };
+ 008FBF541628B7E800BC5BE2 /* core.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = core.c; sourceTree = "<group>"; };
+ 008FBF551628B7E800BC5BE2 /* descriptor.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = descriptor.c; sourceTree = "<group>"; };
+ 008FBF561628B7E800BC5BE2 /* io.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = io.c; sourceTree = "<group>"; };
+ 008FBF5A1628B7E800BC5BE2 /* libusb.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = libusb.h; sourceTree = "<group>"; };
+ 008FBF671628B7E800BC5BE2 /* libusbi.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = libusbi.h; sourceTree = "<group>"; };
+ 008FBF6C1628B7E800BC5BE2 /* darwin_usb.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = darwin_usb.c; sourceTree = "<group>"; };
+ 008FBF6D1628B7E800BC5BE2 /* darwin_usb.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = darwin_usb.h; sourceTree = "<group>"; };
+ 008FBF711628B7E800BC5BE2 /* poll_posix.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = poll_posix.h; sourceTree = "<group>"; };
+ 008FBF741628B7E800BC5BE2 /* threads_posix.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = threads_posix.c; sourceTree = "<group>"; };
+ 008FBF751628B7E800BC5BE2 /* threads_posix.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = threads_posix.h; sourceTree = "<group>"; };
+ 008FBF7A1628B7E800BC5BE2 /* sync.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = sync.c; sourceTree = "<group>"; };
+ 008FBF7B1628B7E800BC5BE2 /* version.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = version.h; sourceTree = "<group>"; };
+ 008FBF7C1628B7E800BC5BE2 /* version_nano.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = version_nano.h; sourceTree = "<group>"; };
+ 008FBFA41628B84200BC5BE2 /* config.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = config.h; sourceTree = "<group>"; };
+ 008FBFA61628B87000BC5BE2 /* CoreFoundation.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = CoreFoundation.framework; path = System/Library/Frameworks/CoreFoundation.framework; sourceTree = SDKROOT; };
+ 008FBFA81628B88000BC5BE2 /* IOKit.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = IOKit.framework; path = System/Library/Frameworks/IOKit.framework; sourceTree = SDKROOT; };
+ 008FBFAA1628B8CB00BC5BE2 /* libobjc.dylib */ = {isa = PBXFileReference; lastKnownFileType = "compiled.mach-o.dylib"; name = libobjc.dylib; path = usr/lib/libobjc.dylib; sourceTree = SDKROOT; };
+ 008FBFBD1628B9FE00BC5BE2 /* xusb */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = xusb; sourceTree = BUILT_PRODUCTS_DIR; };
+ 008FBFD71628BA0E00BC5BE2 /* dpfp.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = dpfp.c; sourceTree = "<group>"; };
+ 008FBFDB1628BA0E00BC5BE2 /* dpfp_threaded.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = dpfp_threaded.c; sourceTree = "<group>"; };
+ 008FBFDC1628BA0E00BC5BE2 /* ezusb.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = ezusb.c; sourceTree = "<group>"; };
+ 008FBFDD1628BA0E00BC5BE2 /* ezusb.h */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.h; path = ezusb.h; sourceTree = "<group>"; };
+ 008FBFE11628BA0E00BC5BE2 /* fxload.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = fxload.c; sourceTree = "<group>"; };
+ 008FBFE71628BA0E00BC5BE2 /* listdevs.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = listdevs.c; sourceTree = "<group>"; };
+ 008FBFED1628BA0E00BC5BE2 /* xusb.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; path = xusb.c; sourceTree = "<group>"; };
+ 008FBFF51628BB8B00BC5BE2 /* dpfp */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = dpfp; sourceTree = BUILT_PRODUCTS_DIR; };
+ 008FC0051628BBDB00BC5BE2 /* dpfp_threaded */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = dpfp_threaded; sourceTree = BUILT_PRODUCTS_DIR; };
+ 008FC0151628BC0300BC5BE2 /* fxload */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = fxload; sourceTree = BUILT_PRODUCTS_DIR; };
+ 008FC0261628BC6B00BC5BE2 /* listdevs */ = {isa = PBXFileReference; explicitFileType = "compiled.mach-o.executable"; includeInIndex = 0; path = listdevs; sourceTree = BUILT_PRODUCTS_DIR; };
+ 1438D77817A2ED9F00166101 /* hotplug.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = hotplug.c; sourceTree = "<group>"; };
+ 1438D77917A2ED9F00166101 /* hotplug.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = hotplug.h; sourceTree = "<group>"; };
+ 1438D77C17A2EDCD00166101 /* poll_posix.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = poll_posix.c; sourceTree = "<group>"; };
+ 1438D77E17A2F0EA00166101 /* strerror.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = strerror.c; sourceTree = "<group>"; };
+ 1443EE8416417E63007E0579 /* common.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = common.xcconfig; sourceTree = SOURCE_ROOT; };
+ 1443EE8516417E63007E0579 /* debug.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = debug.xcconfig; sourceTree = SOURCE_ROOT; };
+ 1443EE8616417E63007E0579 /* libusb_debug.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = libusb_debug.xcconfig; sourceTree = SOURCE_ROOT; };
+ 1443EE8716417E63007E0579 /* libusb.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = libusb.xcconfig; sourceTree = SOURCE_ROOT; };
+ 1443EE8816417E63007E0579 /* release.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = release.xcconfig; sourceTree = SOURCE_ROOT; };
+ 1443EE8916417EA6007E0579 /* libusb_release.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = libusb_release.xcconfig; sourceTree = SOURCE_ROOT; };
+/* End PBXFileReference section */
+
+/* Begin PBXFrameworksBuildPhase section */
+ 008FBF2E1628B79300BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBFAB1628B8CB00BC5BE2 /* libobjc.dylib in Frameworks */,
+ 008FBFA91628B88000BC5BE2 /* IOKit.framework in Frameworks */,
+ 008FBFA71628B87000BC5BE2 /* CoreFoundation.framework in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FBFBA1628B9FE00BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBFF01628BA3A00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FBFF21628BB8B00BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0001628BBCD00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0021628BBDB00BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0101628BBE900BC5BE2 /* libusb-1.0.0.dylib in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0121628BC0300BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0201628BC1B00BC5BE2 /* libusb-1.0.0.dylib in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0231628BC6B00BC5BE2 /* Frameworks */ = {
+ isa = PBXFrameworksBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0311628BC7800BC5BE2 /* libusb-1.0.0.dylib in Frameworks */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+/* End PBXFrameworksBuildPhase section */
+
+/* Begin PBXGroup section */
+ 008FBF261628B79300BC5BE2 = {
+ isa = PBXGroup;
+ children = (
+ 1443EE8316417DE3007E0579 /* xcconfig */,
+ 008FBFA41628B84200BC5BE2 /* config.h */,
+ 008FBF3B1628B7E800BC5BE2 /* libusb */,
+ 008FBFC81628BA0E00BC5BE2 /* examples */,
+ 1443EE8A16419057007E0579 /* Apple */,
+ 008FBF321628B79300BC5BE2 /* Products */,
+ );
+ sourceTree = "<group>";
+ };
+ 008FBF321628B79300BC5BE2 /* Products */ = {
+ isa = PBXGroup;
+ children = (
+ 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */,
+ 008FBFBD1628B9FE00BC5BE2 /* xusb */,
+ 008FBFF51628BB8B00BC5BE2 /* dpfp */,
+ 008FC0051628BBDB00BC5BE2 /* dpfp_threaded */,
+ 008FC0151628BC0300BC5BE2 /* fxload */,
+ 008FC0261628BC6B00BC5BE2 /* listdevs */,
+ );
+ name = Products;
+ sourceTree = "<group>";
+ };
+ 008FBF3B1628B7E800BC5BE2 /* libusb */ = {
+ isa = PBXGroup;
+ children = (
+ 008FBF541628B7E800BC5BE2 /* core.c */,
+ 008FBF551628B7E800BC5BE2 /* descriptor.c */,
+ 1438D77817A2ED9F00166101 /* hotplug.c */,
+ 1438D77917A2ED9F00166101 /* hotplug.h */,
+ 008FBF561628B7E800BC5BE2 /* io.c */,
+ 008FBF5A1628B7E800BC5BE2 /* libusb.h */,
+ 008FBF671628B7E800BC5BE2 /* libusbi.h */,
+ 008FBF6B1628B7E800BC5BE2 /* os */,
+ 1438D77E17A2F0EA00166101 /* strerror.c */,
+ 008FBF7A1628B7E800BC5BE2 /* sync.c */,
+ 008FBF7B1628B7E800BC5BE2 /* version.h */,
+ 008FBF7C1628B7E800BC5BE2 /* version_nano.h */,
+ );
+ name = libusb;
+ path = ../libusb;
+ sourceTree = "<group>";
+ };
+ 008FBF6B1628B7E800BC5BE2 /* os */ = {
+ isa = PBXGroup;
+ children = (
+ 008FBF6C1628B7E800BC5BE2 /* darwin_usb.c */,
+ 008FBF6D1628B7E800BC5BE2 /* darwin_usb.h */,
+ 1438D77C17A2EDCD00166101 /* poll_posix.c */,
+ 008FBF711628B7E800BC5BE2 /* poll_posix.h */,
+ 008FBF741628B7E800BC5BE2 /* threads_posix.c */,
+ 008FBF751628B7E800BC5BE2 /* threads_posix.h */,
+ );
+ path = os;
+ sourceTree = "<group>";
+ };
+ 008FBFC81628BA0E00BC5BE2 /* examples */ = {
+ isa = PBXGroup;
+ children = (
+ 008FBFD71628BA0E00BC5BE2 /* dpfp.c */,
+ 008FBFDB1628BA0E00BC5BE2 /* dpfp_threaded.c */,
+ 008FBFDC1628BA0E00BC5BE2 /* ezusb.c */,
+ 008FBFE11628BA0E00BC5BE2 /* fxload.c */,
+ 008FBFE71628BA0E00BC5BE2 /* listdevs.c */,
+ 008FBFED1628BA0E00BC5BE2 /* xusb.c */,
+ 008FBFDD1628BA0E00BC5BE2 /* ezusb.h */,
+ );
+ name = examples;
+ path = ../examples;
+ sourceTree = "<group>";
+ };
+ 1443EE8316417DE3007E0579 /* xcconfig */ = {
+ isa = PBXGroup;
+ children = (
+ 1443EE8416417E63007E0579 /* common.xcconfig */,
+ 1443EE8516417E63007E0579 /* debug.xcconfig */,
+ 1443EE8816417E63007E0579 /* release.xcconfig */,
+ 1443EE8716417E63007E0579 /* libusb.xcconfig */,
+ 1443EE8616417E63007E0579 /* libusb_debug.xcconfig */,
+ 1443EE8916417EA6007E0579 /* libusb_release.xcconfig */,
+ );
+ name = xcconfig;
+ path = ../libusb;
+ sourceTree = "<group>";
+ };
+ 1443EE8A16419057007E0579 /* Apple */ = {
+ isa = PBXGroup;
+ children = (
+ 008FBFAA1628B8CB00BC5BE2 /* libobjc.dylib */,
+ 008FBFA81628B88000BC5BE2 /* IOKit.framework */,
+ 008FBFA61628B87000BC5BE2 /* CoreFoundation.framework */,
+ );
+ name = Apple;
+ path = ../libusb;
+ sourceTree = "<group>";
+ };
+/* End PBXGroup section */
+
+/* Begin PBXHeadersBuildPhase section */
+ 008FBF2F1628B79300BC5BE2 /* Headers */ = {
+ isa = PBXHeadersBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBF891628B7E800BC5BE2 /* libusb.h in Headers */,
+ 008FBF901628B7E800BC5BE2 /* libusbi.h in Headers */,
+ 008FBF931628B7E800BC5BE2 /* darwin_usb.h in Headers */,
+ 008FBF971628B7E800BC5BE2 /* poll_posix.h in Headers */,
+ 008FBF9B1628B7E800BC5BE2 /* threads_posix.h in Headers */,
+ 008FBFA11628B7E800BC5BE2 /* version.h in Headers */,
+ 008FBFA21628B7E800BC5BE2 /* version_nano.h in Headers */,
+ 008FBFA51628B84200BC5BE2 /* config.h in Headers */,
+ 1438D77B17A2ED9F00166101 /* hotplug.h in Headers */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+/* End PBXHeadersBuildPhase section */
+
+/* Begin PBXNativeTarget section */
+ 008FBF301628B79300BC5BE2 /* libusb */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FBF351628B79300BC5BE2 /* Build configuration list for PBXNativeTarget "libusb" */;
+ buildPhases = (
+ 008FBF2D1628B79300BC5BE2 /* Sources */,
+ 008FBF2E1628B79300BC5BE2 /* Frameworks */,
+ 008FBF2F1628B79300BC5BE2 /* Headers */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ );
+ name = libusb;
+ productName = libusb;
+ productReference = 008FBF311628B79300BC5BE2 /* libusb-1.0.0.dylib */;
+ productType = "com.apple.product-type.library.dynamic";
+ };
+ 008FBFBC1628B9FE00BC5BE2 /* xusb */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FBFC61628B9FE00BC5BE2 /* Build configuration list for PBXNativeTarget "xusb" */;
+ buildPhases = (
+ 008FBFB91628B9FE00BC5BE2 /* Sources */,
+ 008FBFBA1628B9FE00BC5BE2 /* Frameworks */,
+ 008FBFBB1628B9FE00BC5BE2 /* CopyFiles */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ 1443EE941641927D007E0579 /* PBXTargetDependency */,
+ );
+ name = xusb;
+ productName = xusb;
+ productReference = 008FBFBD1628B9FE00BC5BE2 /* xusb */;
+ productType = "com.apple.product-type.tool";
+ };
+ 008FBFF41628BB8B00BC5BE2 /* dpfp */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FBFFC1628BB8C00BC5BE2 /* Build configuration list for PBXNativeTarget "dpfp" */;
+ buildPhases = (
+ 008FBFF11628BB8B00BC5BE2 /* Sources */,
+ 008FBFF21628BB8B00BC5BE2 /* Frameworks */,
+ 008FBFF31628BB8B00BC5BE2 /* CopyFiles */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ 1443EE921641927A007E0579 /* PBXTargetDependency */,
+ );
+ name = dpfp;
+ productName = dpfp;
+ productReference = 008FBFF51628BB8B00BC5BE2 /* dpfp */;
+ productType = "com.apple.product-type.tool";
+ };
+ 008FC0041628BBDB00BC5BE2 /* dpfp_threaded */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FC00C1628BBDB00BC5BE2 /* Build configuration list for PBXNativeTarget "dpfp_threaded" */;
+ buildPhases = (
+ 008FC0011628BBDB00BC5BE2 /* Sources */,
+ 008FC0021628BBDB00BC5BE2 /* Frameworks */,
+ 008FC0031628BBDB00BC5BE2 /* CopyFiles */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ 1443EE9016419276007E0579 /* PBXTargetDependency */,
+ );
+ name = dpfp_threaded;
+ productName = dpfp_threaded;
+ productReference = 008FC0051628BBDB00BC5BE2 /* dpfp_threaded */;
+ productType = "com.apple.product-type.tool";
+ };
+ 008FC0141628BC0300BC5BE2 /* fxload */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FC01C1628BC0300BC5BE2 /* Build configuration list for PBXNativeTarget "fxload" */;
+ buildPhases = (
+ 008FC0111628BC0300BC5BE2 /* Sources */,
+ 008FC0121628BC0300BC5BE2 /* Frameworks */,
+ 008FC0131628BC0300BC5BE2 /* CopyFiles */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ 1443EE8E16419273007E0579 /* PBXTargetDependency */,
+ );
+ name = fxload;
+ productName = fxload;
+ productReference = 008FC0151628BC0300BC5BE2 /* fxload */;
+ productType = "com.apple.product-type.tool";
+ };
+ 008FC0251628BC6B00BC5BE2 /* listdevs */ = {
+ isa = PBXNativeTarget;
+ buildConfigurationList = 008FC02D1628BC6B00BC5BE2 /* Build configuration list for PBXNativeTarget "listdevs" */;
+ buildPhases = (
+ 008FC0221628BC6B00BC5BE2 /* Sources */,
+ 008FC0231628BC6B00BC5BE2 /* Frameworks */,
+ 008FC0241628BC6B00BC5BE2 /* CopyFiles */,
+ );
+ buildRules = (
+ );
+ dependencies = (
+ 1443EE8C1641926D007E0579 /* PBXTargetDependency */,
+ );
+ name = listdevs;
+ productName = listdevs;
+ productReference = 008FC0261628BC6B00BC5BE2 /* listdevs */;
+ productType = "com.apple.product-type.tool";
+ };
+/* End PBXNativeTarget section */
+
+/* Begin PBXProject section */
+ 008FBF281628B79300BC5BE2 /* Project object */ = {
+ isa = PBXProject;
+ attributes = {
+ LastUpgradeCheck = 0450;
+ ORGANIZATIONNAME = libusb;
+ };
+ buildConfigurationList = 008FBF2B1628B79300BC5BE2 /* Build configuration list for PBXProject "libusb" */;
+ compatibilityVersion = "Xcode 3.1";
+ developmentRegion = English;
+ hasScannedForEncodings = 0;
+ knownRegions = (
+ en,
+ );
+ mainGroup = 008FBF261628B79300BC5BE2;
+ productRefGroup = 008FBF321628B79300BC5BE2 /* Products */;
+ projectDirPath = "";
+ projectRoot = "";
+ targets = (
+ 008FBF301628B79300BC5BE2 /* libusb */,
+ 008FBFBC1628B9FE00BC5BE2 /* xusb */,
+ 008FBFF41628BB8B00BC5BE2 /* dpfp */,
+ 008FC0041628BBDB00BC5BE2 /* dpfp_threaded */,
+ 008FC0141628BC0300BC5BE2 /* fxload */,
+ 008FC0251628BC6B00BC5BE2 /* listdevs */,
+ 008FC0321628BC9400BC5BE2 /* all */,
+ );
+ };
+/* End PBXProject section */
+
+/* Begin PBXSourcesBuildPhase section */
+ 008FBF2D1628B79300BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBF861628B7E800BC5BE2 /* core.c in Sources */,
+ 008FBF871628B7E800BC5BE2 /* descriptor.c in Sources */,
+ 008FBF881628B7E800BC5BE2 /* io.c in Sources */,
+ 008FBF921628B7E800BC5BE2 /* darwin_usb.c in Sources */,
+ 008FBF9A1628B7E800BC5BE2 /* threads_posix.c in Sources */,
+ 008FBFA01628B7E800BC5BE2 /* sync.c in Sources */,
+ 1438D77A17A2ED9F00166101 /* hotplug.c in Sources */,
+ 1438D77D17A2EDCD00166101 /* poll_posix.c in Sources */,
+ 1438D77F17A2F0EA00166101 /* strerror.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FBFB91628B9FE00BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBFEF1628BA3500BC5BE2 /* xusb.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FBFF11628BB8B00BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FBFFF1628BB9600BC5BE2 /* dpfp.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0011628BBDB00BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC00F1628BBE400BC5BE2 /* dpfp_threaded.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0111628BC0300BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0211628BC5200BC5BE2 /* ezusb.c in Sources */,
+ 008FC01F1628BC1500BC5BE2 /* fxload.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+ 008FC0221628BC6B00BC5BE2 /* Sources */ = {
+ isa = PBXSourcesBuildPhase;
+ buildActionMask = 2147483647;
+ files = (
+ 008FC0301628BC7400BC5BE2 /* listdevs.c in Sources */,
+ );
+ runOnlyForDeploymentPostprocessing = 0;
+ };
+/* End PBXSourcesBuildPhase section */
+
+/* Begin PBXTargetDependency section */
+ 008FC0371628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 008FC0361628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 008FC0391628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBFBC1628B9FE00BC5BE2 /* xusb */;
+ targetProxy = 008FC0381628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 008FC03B1628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBFF41628BB8B00BC5BE2 /* dpfp */;
+ targetProxy = 008FC03A1628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 008FC03D1628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FC0041628BBDB00BC5BE2 /* dpfp_threaded */;
+ targetProxy = 008FC03C1628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 008FC03F1628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FC0141628BC0300BC5BE2 /* fxload */;
+ targetProxy = 008FC03E1628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 008FC0411628BC9A00BC5BE2 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FC0251628BC6B00BC5BE2 /* listdevs */;
+ targetProxy = 008FC0401628BC9A00BC5BE2 /* PBXContainerItemProxy */;
+ };
+ 1443EE8C1641926D007E0579 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 1443EE8B1641926D007E0579 /* PBXContainerItemProxy */;
+ };
+ 1443EE8E16419273007E0579 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 1443EE8D16419273007E0579 /* PBXContainerItemProxy */;
+ };
+ 1443EE9016419276007E0579 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 1443EE8F16419276007E0579 /* PBXContainerItemProxy */;
+ };
+ 1443EE921641927A007E0579 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 1443EE911641927A007E0579 /* PBXContainerItemProxy */;
+ };
+ 1443EE941641927D007E0579 /* PBXTargetDependency */ = {
+ isa = PBXTargetDependency;
+ target = 008FBF301628B79300BC5BE2 /* libusb */;
+ targetProxy = 1443EE931641927D007E0579 /* PBXContainerItemProxy */;
+ };
+/* End PBXTargetDependency section */
+
+/* Begin XCBuildConfiguration section */
+ 008FBF331628B79300BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ buildSettings = {
+ };
+ name = Debug;
+ };
+ 008FBF341628B79300BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ buildSettings = {
+ };
+ name = Release;
+ };
+ 008FBF361628B79300BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8616417E63007E0579 /* libusb_debug.xcconfig */;
+ buildSettings = {
+ };
+ name = Debug;
+ };
+ 008FBF371628B79300BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8916417EA6007E0579 /* libusb_release.xcconfig */;
+ buildSettings = {
+ };
+ name = Release;
+ };
+ 008FBFC41628B9FE00BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8516417E63007E0579 /* debug.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FBFC51628B9FE00BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8816417E63007E0579 /* release.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+ 008FBFFD1628BB8C00BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8516417E63007E0579 /* debug.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FBFFE1628BB8C00BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8816417E63007E0579 /* release.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+ 008FC00D1628BBDB00BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8516417E63007E0579 /* debug.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FC00E1628BBDB00BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8816417E63007E0579 /* release.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+ 008FC01D1628BC0300BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8516417E63007E0579 /* debug.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FC01E1628BC0300BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8816417E63007E0579 /* release.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+ 008FC02E1628BC6B00BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8516417E63007E0579 /* debug.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FC02F1628BC6B00BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ baseConfigurationReference = 1443EE8816417E63007E0579 /* release.xcconfig */;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+ 008FC0341628BC9400BC5BE2 /* Debug */ = {
+ isa = XCBuildConfiguration;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Debug;
+ };
+ 008FC0351628BC9400BC5BE2 /* Release */ = {
+ isa = XCBuildConfiguration;
+ buildSettings = {
+ PRODUCT_NAME = "$(TARGET_NAME)";
+ };
+ name = Release;
+ };
+/* End XCBuildConfiguration section */
+
+/* Begin XCConfigurationList section */
+ 008FBF2B1628B79300BC5BE2 /* Build configuration list for PBXProject "libusb" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FBF331628B79300BC5BE2 /* Debug */,
+ 008FBF341628B79300BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FBF351628B79300BC5BE2 /* Build configuration list for PBXNativeTarget "libusb" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FBF361628B79300BC5BE2 /* Debug */,
+ 008FBF371628B79300BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FBFC61628B9FE00BC5BE2 /* Build configuration list for PBXNativeTarget "xusb" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FBFC41628B9FE00BC5BE2 /* Debug */,
+ 008FBFC51628B9FE00BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FBFFC1628BB8C00BC5BE2 /* Build configuration list for PBXNativeTarget "dpfp" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FBFFD1628BB8C00BC5BE2 /* Debug */,
+ 008FBFFE1628BB8C00BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FC00C1628BBDB00BC5BE2 /* Build configuration list for PBXNativeTarget "dpfp_threaded" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FC00D1628BBDB00BC5BE2 /* Debug */,
+ 008FC00E1628BBDB00BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FC01C1628BC0300BC5BE2 /* Build configuration list for PBXNativeTarget "fxload" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FC01D1628BC0300BC5BE2 /* Debug */,
+ 008FC01E1628BC0300BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FC02D1628BC6B00BC5BE2 /* Build configuration list for PBXNativeTarget "listdevs" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FC02E1628BC6B00BC5BE2 /* Debug */,
+ 008FC02F1628BC6B00BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+ 008FC0331628BC9400BC5BE2 /* Build configuration list for PBXAggregateTarget "all" */ = {
+ isa = XCConfigurationList;
+ buildConfigurations = (
+ 008FC0341628BC9400BC5BE2 /* Debug */,
+ 008FC0351628BC9400BC5BE2 /* Release */,
+ );
+ defaultConfigurationIsVisible = 0;
+ defaultConfigurationName = Release;
+ };
+/* End XCConfigurationList section */
+ };
+ rootObject = 008FBF281628B79300BC5BE2 /* Project object */;
+}
+
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+#include "debug.xcconfig"
+#include "libusb.xcconfig"
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+#include "release.xcconfig"
+#include "libusb.xcconfig"
--- /dev/null
+//
+// libusb Xcode configuration file
+// Copyright © 2012 Pete Batard <pete@akeo.ie>
+// For more information, please visit: <http://libusb.info>
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+#include "common.xcconfig"
+
+// Put debug symbols in separate .dym file.
+DEBUG_INFORMATION_FORMAT = dwarf-with-dsym
+
+// Optimizations in release.
+GCC_OPTIMIZATION_LEVEL = s
+LLVM_LTO = YES
+
+// Define NDEBUG so asserts go away in release.
+GCC_PREPROCESSOR_DEFINITIONS = $(inherited) NDEBUG=1
--- /dev/null
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
--- /dev/null
+libusb for Android
+==================
+
+Building:
+---------
+
+To build libusb for Android do the following:
+
+ 1. Download the latest NDK from:
+ http://developer.android.com/tools/sdk/ndk/index.html
+
+ 2. Extract the NDK.
+
+ 3. Open a shell and make sure there exist an NDK global variable
+ set to the directory where you extracted the NDK.
+
+ 4. Change directory to libusb's "android/jni"
+
+ 5. Run "$NDK/ndk-build".
+
+The libusb library, examples and tests can then be found in:
+ "android/libs/$ARCH"
+
+Where $ARCH is one of:
+ armeabi
+ armeabi-v7a
+ x86
+
+
+Installing:
+-----------
+
+If you wish to use libusb from native code in own Android application
+then you should add the following line to your Android.mk file:
+
+ include $(PATH_TO_LIBUSB_SRC)/android/jni/libusb.mk
+
+You will then need to add the following lines to the build
+configuration for each native binary which uses libusb:
+
+ LOCAL_C_INCLUDES += $(LIBUSB_ROOT_ABS)
+ LOCAL_SHARED_LIBRARIES += libusb1.0
+
+The Android build system will then correctly include libusb in the
+application package (APK) file, provided ndk-build is invoked before
+the package is built.
+
+
+For a rooted device it is possible to install libusb into the system
+image of a running device:
+
+ 1. Enable ADB on the device.
+
+ 2. Connect the device to a machine running ADB.
+
+ 3. Execute the following commands on the machine
+ running ADB:
+
+ # Make the system partition writable
+ adb shell su -c "mount -o remount,rw /system"
+
+ # Install libusb
+ adb push obj/local/armeabi/libusb1.0.so /sdcard/
+ adb shell su -c "cat > /system/lib/libusb1.0.so < /sdcard/libusb1.0.so"
+ adb shell rm /system/lib/libusb1.0.so
+
+ # Install the samples and tests
+ for B in listdevs fxload xusb sam3u_benchmark hotplugtest stress
+ do
+ adb push "obj/local/armeabi/$B" /sdcard/
+ adb shell su -c "cat > /system/bin/$B < /sdcard/$B"
+ adb shell su -c "chmod 0755 /system/bin/$B"
+ adb shell rm "/sdcard/$B"
+ done
+
+ # Make the system partition read only again
+ adb shell su -c "mount -o remount,ro /system"
+
+ # Run listdevs to
+ adb shell su -c "listdevs"
+
+ 4. If your device only has a single OTG port then ADB can generally
+ be switched to using Wifi with the following commands when connected
+ via USB:
+
+ adb shell netcfg
+ # Note the wifi IP address of the phone
+ adb tcpip 5555
+ # Use the IP address from netcfg
+ adb connect 192.168.1.123:5555
+
+Runtime Permissions:
+--------------------
+
+The default system configuration on most Android device will not allow
+access to USB devices. There are several options for changing this.
+
+If you have control of the system image then you can modify the
+ueventd.rc used in the image to change the permissions on
+/dev/bus/usb/*/*. If using this approach then it is advisable to
+create a new Android permission to protect access to these files.
+It is not advisable to give all applications read and write permissions
+to these files.
+
+For rooted devices the code using libusb could be executed as root
+using the "su" command. An alternative would be to use the "su" command
+to change the permissions on the appropriate /dev/bus/usb/ files.
+
+Users have reported success in using android.hardware.usb.UsbManager
+to request permission to use the UsbDevice and then opening the
+device. The difficulties in this method is that there is no guarantee
+that it will continue to work in the future Android versions, it
+requires invoking Java APIs and running code to match each
+android.hardware.usb.UsbDevice to a libusb_device.
--- /dev/null
+/*
+ * Android build config for libusb
+ * Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Start with debug message logging enabled */
+/* #undef ENABLE_DEBUG_LOGGING */
+
+/* Message logging */
+#define ENABLE_LOGGING
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Linux backend */
+#define OS_LINUX 1
+
+/* Enable output to system log */
+#define USE_SYSTEM_LOGGING_FACILITY 1
+
+/* type of second poll() argument */
+#define POLL_NFDS_TYPE nfds_t
+
+/* Use POSIX Threads */
+#define THREADS_POSIX 1
+
+/* Default visibility */
+#define DEFAULT_VISIBILITY __attribute__((visibility("default")))
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the <poll.h> header file. */
+#define HAVE_POLL_H 1
+
+/* Define to 1 if you have the <signal.h> header file. */
+#define HAVE_SIGNAL_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#define HAVE_LINUX_FILTER_H 1
+
+/* Define to 1 if you have the <linux/netlink.h> header file. */
+#define HAVE_LINUX_NETLINK_H 1
+
+/* Define to 1 if you have the <asm/types.h> header file. */
+#define HAVE_ASM_TYPES_H 1
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#define HAVE_SYS_SOCKET_H 1
--- /dev/null
+# Android build config for libusb, examples and tests
+# Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(LOCAL_PATH)/libusb.mk
+include $(LOCAL_PATH)/examples.mk
+include $(LOCAL_PATH)/tests.mk
--- /dev/null
+# Android application build config for libusb
+# Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+APP_ABI := all
+
+# Workaround for MIPS toolchain linker being unable to find liblog dependency
+# of shared object in NDK versions at least up to r9.
+#
+APP_LDFLAGS := -llog
--- /dev/null
+# Android build config for libusb examples
+# Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+LOCAL_PATH:= $(call my-dir)
+LIBUSB_ROOT_REL:= ../..
+LIBUSB_ROOT_ABS:= $(LOCAL_PATH)/../..
+
+# listdevs
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/listdevs.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= listdevs
+
+include $(BUILD_EXECUTABLE)
+
+# xusb
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/xusb.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= xusb
+
+include $(BUILD_EXECUTABLE)
+
+# hotplugtest
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/hotplugtest.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= hotplugtest
+
+include $(BUILD_EXECUTABLE)
+
+# fxload
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/fxload.c \
+ $(LIBUSB_ROOT_REL)/examples/ezusb.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= fxload
+
+include $(BUILD_EXECUTABLE)
+
+# sam3u_benchmake
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/sam3u_benchmark.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= sam3u_benchmark
+
+include $(BUILD_EXECUTABLE)
+
+# dpfp
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/dpfp.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= dpfp
+
+include $(BUILD_EXECUTABLE)
+
+# dpfp_threaded
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/examples/dpfp_threaded.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+
+LOCAL_MODULE:= dpfp_threaded
+
+include $(BUILD_EXECUTABLE)
--- /dev/null
+# Android build config for libusb
+# Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+LOCAL_PATH:= $(call my-dir)
+LIBUSB_ROOT_REL:= ../..
+LIBUSB_ROOT_ABS:= $(LOCAL_PATH)/../..
+
+# libusb
+
+include $(CLEAR_VARS)
+
+LIBUSB_ROOT_REL:= ../..
+LIBUSB_ROOT_ABS:= $(LOCAL_PATH)/../..
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/libusb/core.c \
+ $(LIBUSB_ROOT_REL)/libusb/descriptor.c \
+ $(LIBUSB_ROOT_REL)/libusb/hotplug.c \
+ $(LIBUSB_ROOT_REL)/libusb/io.c \
+ $(LIBUSB_ROOT_REL)/libusb/sync.c \
+ $(LIBUSB_ROOT_REL)/libusb/strerror.c \
+ $(LIBUSB_ROOT_REL)/libusb/os/linux_usbfs.c \
+ $(LIBUSB_ROOT_REL)/libusb/os/poll_posix.c \
+ $(LIBUSB_ROOT_REL)/libusb/os/threads_posix.c \
+ $(LIBUSB_ROOT_REL)/libusb/os/linux_netlink.c
+
+LOCAL_C_INCLUDES += \
+ $(LOCAL_PATH)/.. \
+ $(LIBUSB_ROOT_ABS)/libusb \
+ $(LIBUSB_ROOT_ABS)/libusb/os
+
+LOCAL_EXPORT_C_INCLUDES := \
+ $(LIBUSB_ROOT_ABS)/libusb
+
+LOCAL_LDLIBS := -llog
+
+LOCAL_MODULE := libusb1.0
+
+include $(BUILD_SHARED_LIBRARY)
--- /dev/null
+# Android build config for libusb tests
+# Copyright © 2012-2013 RealVNC Ltd. <toby.gray@realvnc.com>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+LOCAL_PATH:= $(call my-dir)
+LIBUSB_ROOT_REL:= ../..
+LIBUSB_ROOT_ABS:= $(LOCAL_PATH)/../..
+
+# testlib
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/tests/testlib.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)/tests
+
+LOCAL_EXPORT_C_INCLUDES := \
+ $(LIBUSB_ROOT_ABS)/tests
+
+LOCAL_MODULE := testlib
+
+include $(BUILD_STATIC_LIBRARY)
+
+
+# stress
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+ $(LIBUSB_ROOT_REL)/tests/stress.c
+
+LOCAL_C_INCLUDES += \
+ $(LIBUSB_ROOT_ABS)
+
+LOCAL_SHARED_LIBRARIES += libusb1.0
+LOCAL_STATIC_LIBRARIES += testlib
+
+LOCAL_MODULE:= stress
+
+include $(BUILD_EXECUTABLE)
--- /dev/null
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright 1992-2015 Free Software Foundation, Inc.
+
+timestamp='2015-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2015 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval $set_cc_for_build
+ cat <<-EOF > $dummy.c
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+ ;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW64*:*)
+ echo ${UNAME_MACHINE}-pc-mingw64
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ *:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ cris:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ crisv32:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ frv:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ ;;
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-${LIBC}
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-${LIBC}
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-${LIBC}
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ exit ;;
+ x86_64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ eval $set_cc_for_build
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Default visibility */
+#undef DEFAULT_VISIBILITY
+
+/* Start with debug message logging enabled */
+#undef ENABLE_DEBUG_LOGGING
+
+/* Message logging */
+#undef ENABLE_LOGGING
+
+/* Define to 1 if you have the <asm/types.h> header file. */
+#undef HAVE_ASM_TYPES_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `udev' library (-ludev). */
+#undef HAVE_LIBUDEV
+
+/* Define to 1 if you have the <libudev.h> header file. */
+#undef HAVE_LIBUDEV_H
+
+/* Define to 1 if you have the <linux/filter.h> header file. */
+#undef HAVE_LINUX_FILTER_H
+
+/* Define to 1 if you have the <linux/netlink.h> header file. */
+#undef HAVE_LINUX_NETLINK_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define to 1 if you have the <signal.h> header file. */
+#undef HAVE_SIGNAL_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if the system has the type `struct timespec'. */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* syslog() function available */
+#undef HAVE_SYSLOG_FUNC
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
+/* Darwin backend */
+#undef OS_DARWIN
+
+/* Haiku backend */
+#undef OS_HAIKU
+
+/* Linux backend */
+#undef OS_LINUX
+
+/* NetBSD backend */
+#undef OS_NETBSD
+
+/* OpenBSD backend */
+#undef OS_OPENBSD
+
+/* Windows backend */
+#undef OS_WINDOWS
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* type of second poll() argument */
+#undef POLL_NFDS_TYPE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Use POSIX Threads */
+#undef THREADS_POSIX
+
+/* timerfd headers available */
+#undef USBI_TIMERFD_AVAILABLE
+
+/* Enable output to system log */
+#undef USE_SYSTEM_LOGGING_FACILITY
+
+/* Use udev for device enumeration/hotplug */
+#undef USE_UDEV
+
+/* Version number of package */
+#undef VERSION
+
+/* Oldest Windows version supported */
+#undef WINVER
+
+/* Use GNU extensions */
+#undef _GNU_SOURCE
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright 1992-2015 Free Software Foundation, Inc.
+
+timestamp='2015-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2015 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze*)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
+ | c4x | c8051 | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | epiphany \
+ | fido | fr30 | frv | ft32 \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | k1om \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 | nios2eb | nios2el \
+ | ns16k | ns32k \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | riscv32 | riscv64 \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | k1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | or1k*-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | visium-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze*)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
+ mingw32)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i686-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* | -plan9* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libusb 1.0.20.
+#
+# Report bugs to <libusb-devel@lists.sourceforge.net>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: libusb-devel@lists.sourceforge.net about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libusb'
+PACKAGE_TARNAME='libusb'
+PACKAGE_VERSION='1.0.20'
+PACKAGE_STRING='libusb 1.0.20'
+PACKAGE_BUGREPORT='libusb-devel@lists.sourceforge.net'
+PACKAGE_URL='http://libusb.info'
+
+ac_unique_file="libusb/core.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+enable_option_checking=no
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LTLDFLAGS
+AM_CFLAGS
+HAVE_SIGACTION_FALSE
+HAVE_SIGACTION_TRUE
+BUILD_TESTS_FALSE
+BUILD_TESTS_TRUE
+BUILD_EXAMPLES_FALSE
+BUILD_EXAMPLES_TRUE
+USE_UDEV_FALSE
+USE_UDEV_TRUE
+CREATE_IMPORT_LIB_FALSE
+CREATE_IMPORT_LIB_TRUE
+THREADS_POSIX_FALSE
+THREADS_POSIX_TRUE
+OS_HAIKU_FALSE
+OS_HAIKU_TRUE
+OS_WINDOWS_FALSE
+OS_WINDOWS_TRUE
+OS_NETBSD_FALSE
+OS_NETBSD_TRUE
+OS_OPENBSD_FALSE
+OS_OPENBSD_TRUE
+OS_DARWIN_FALSE
+OS_DARWIN_TRUE
+OS_LINUX_FALSE
+OS_LINUX_TRUE
+OS_HAIKU
+OS_WINDOWS
+OS_NETBSD
+OS_OPENBSD
+OS_DARWIN
+USE_UDEV
+OS_LINUX
+subdirs
+RC
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_maintainer_mode
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_udev
+enable_timerfd
+enable_log
+enable_debug_log
+enable_system_log
+enable_examples_build
+enable_tests_build
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+ac_subdirs_all='libusb/os/haiku'
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures libusb 1.0.20 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/libusb]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of libusb 1.0.20:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --enable-udev use udev for device enumeration and hotplug support
+ (recommended) [default=yes]
+ --enable-timerfd use timerfd for timing [default=auto]
+ --disable-log disable all logging
+ --enable-debug-log start with debug message logging enabled
+ [default=no]
+ --enable-system-log output logging messages to system wide log, if
+ supported by the OS [default=no]
+ --enable-examples-build build example applications [default=no]
+ --enable-tests-build build test applications [default=no]
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <libusb-devel@lists.sourceforge.net>.
+libusb home page: <http://libusb.info>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+libusb configure 1.0.20
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------------------------- ##
+## Report this to libusb-devel@lists.sourceforge.net ##
+## ------------------------------------------------- ##"
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ as_decl_name=`echo $2|sed 's/ *(.*//'`
+ as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+ (void) $as_decl_use;
+#else
+ (void) $as_decl_name;
+#endif
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libusb $as_me 1.0.20, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Library versioning
+# These numbers should be tweaked on every release. Read carefully:
+# http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
+# http://sourceware.org/autobook/autobook/autobook_91.html
+lt_current="1"
+lt_revision="0"
+lt_age="1"
+LTLDFLAGS="-version-info ${lt_current}:${lt_revision}:${lt_age}"
+
+am__api_version='1.15'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libusb'
+ VERSION='1.0.20'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RC"; then
+ ac_cv_prog_RC="$RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RC="${ac_tool_prefix}windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RC=$ac_cv_prog_RC
+if test -n "$RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5
+$as_echo "$RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RC"; then
+ ac_ct_RC=$RC
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RC"; then
+ ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RC="windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RC=$ac_cv_prog_ac_ct_RC
+if test -n "$ac_ct_RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5
+$as_echo "$ac_ct_RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RC" = x; then
+ RC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RC=$ac_ct_RC
+ fi
+else
+ RC="$ac_cv_prog_RC"
+fi
+
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+if test -n "$compiler"; then
+ :
+
+
+
+fi
+
+GCC=$lt_save_GCC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if ${ac_cv_c_inline+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+
+
+$as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+
+LTLDFLAGS="${LTLDFLAGS} -no-undefined"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking operating system" >&5
+$as_echo_n "checking operating system... " >&6; }
+
+case $host in
+*-linux-android*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: This is a Linux-Android system" >&5
+$as_echo "This is a Linux-Android system" >&6; }
+ is_backend_android="yes"
+ ;;
+*)
+ is_backend_android="no"
+esac
+
+case $host in
+*-linux* | *-uclinux*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Linux" >&5
+$as_echo "Linux" >&6; }
+ backend="linux"
+ threads="posix"
+ ;;
+*-darwin*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Darwin/Mac OS X" >&5
+$as_echo "Darwin/Mac OS X" >&6; }
+ backend="darwin"
+ threads="posix"
+ ;;
+*-openbsd*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: OpenBSD" >&5
+$as_echo "OpenBSD" >&6; }
+ backend="openbsd"
+ threads="posix"
+ ;;
+*-netbsd*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: NetBSD" >&5
+$as_echo "NetBSD" >&6; }
+ backend="netbsd"
+ threads="posix"
+ ;;
+*-mingw*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Windows" >&5
+$as_echo "Windows" >&6; }
+ backend="windows"
+ threads="windows"
+ create_import_lib="yes"
+ AM_CFLAGS="${AM_CFLAGS} -fno-omit-frame-pointer"
+ ;;
+*-cygwin*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Cygwin (using Windows backend)" >&5
+$as_echo "Cygwin (using Windows backend)" >&6; }
+ backend="windows"
+ threads="posix"
+ ;;
+*-haiku*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Haiku" >&5
+$as_echo "Haiku" >&6; }
+
+
+subdirs="$subdirs libusb/os/haiku"
+
+ backend="haiku"
+ threads="posix"
+ ;;
+*)
+ as_fn_error $? "unsupported operating system" "$LINENO" 5
+esac
+
+case $backend in
+linux)
+
+$as_echo "#define OS_LINUX 1" >>confdefs.h
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
+$as_echo_n "checking for library containing clock_gettime... " >&6; }
+if ${ac_cv_search_clock_gettime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
+int
+main ()
+{
+return clock_gettime ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' rt; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib -pthread $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_clock_gettime=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_clock_gettime+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_clock_gettime+:} false; then :
+
+else
+ ac_cv_search_clock_gettime=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
+$as_echo "$ac_cv_search_clock_gettime" >&6; }
+ac_res=$ac_cv_search_clock_gettime
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ # Check whether --enable-udev was given.
+if test "${enable_udev+set}" = set; then :
+ enableval=$enable_udev;
+else
+ enable_udev="yes"
+fi
+
+ if test "x$enable_udev" = "xyes" ; then
+ # system has udev. use it or fail!
+ for ac_header in libudev.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "libudev.h" "ac_cv_header_libudev_h" "$ac_includes_default"
+if test "x$ac_cv_header_libudev_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBUDEV_H 1
+_ACEOF
+
+else
+ as_fn_error $? "\"udev support requested but libudev not installed\"" "$LINENO" 5
+fi
+
+done
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for udev_new in -ludev" >&5
+$as_echo_n "checking for udev_new in -ludev... " >&6; }
+if ${ac_cv_lib_udev_udev_new+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ludev $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char udev_new ();
+int
+main ()
+{
+return udev_new ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_udev_udev_new=yes
+else
+ ac_cv_lib_udev_udev_new=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_udev_udev_new" >&5
+$as_echo "$ac_cv_lib_udev_udev_new" >&6; }
+if test "x$ac_cv_lib_udev_udev_new" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBUDEV 1
+_ACEOF
+
+ LIBS="-ludev $LIBS"
+
+else
+ as_fn_error $? "\"udev support requested but libudev not installed\"" "$LINENO" 5
+fi
+
+
+$as_echo "#define USE_UDEV 1" >>confdefs.h
+
+ else
+ for ac_header in asm/types.h sys/socket.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ for ac_header in linux/netlink.h linux/filter.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "
+#ifdef HAVE_ASM_TYPES_H
+#include <asm/types.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ as_fn_error $? "\"Linux netlink headers not found\"" "$LINENO" 5
+fi
+
+done
+
+ fi
+
+
+case $is_backend_android in
+yes)
+
+$as_echo "#define HAVE_GETTIMEOFDAY 1" >>confdefs.h
+
+ ;;
+*)
+ THREAD_CFLAGS="-pthread"
+ LIBS="${LIBS} -pthread"
+esac
+
+ for ac_header in poll.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default"
+if test "x$ac_cv_header_poll_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POLL_H 1
+_ACEOF
+
+fi
+
+done
+
+
+$as_echo "#define POLL_NFDS_TYPE nfds_t" >>confdefs.h
+
+ ;;
+darwin)
+
+$as_echo "#define OS_DARWIN 1" >>confdefs.h
+
+
+ LIBS="-lobjc -Wl,-framework,IOKit -Wl,-framework,CoreFoundation"
+ LTLDFLAGS="${LTLDFLAGS} -Wl,-prebind"
+ for ac_header in poll.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default"
+if test "x$ac_cv_header_poll_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POLL_H 1
+_ACEOF
+
+fi
+
+done
+
+ ac_fn_c_check_type "$LINENO" "nfds_t" "ac_cv_type_nfds_t" "#include <poll.h>
+"
+if test "x$ac_cv_type_nfds_t" = xyes; then :
+
+$as_echo "#define POLL_NFDS_TYPE nfds_t" >>confdefs.h
+
+else
+
+$as_echo "#define POLL_NFDS_TYPE unsigned int" >>confdefs.h
+
+fi
+
+ ;;
+openbsd)
+
+$as_echo "#define OS_OPENBSD 1" >>confdefs.h
+
+
+ THREAD_CFLAGS="-pthread"
+ LIBS="-pthread"
+ for ac_header in poll.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default"
+if test "x$ac_cv_header_poll_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POLL_H 1
+_ACEOF
+
+fi
+
+done
+
+
+$as_echo "#define POLL_NFDS_TYPE nfds_t" >>confdefs.h
+
+ ;;
+netbsd)
+
+$as_echo "#define OS_NETBSD 1" >>confdefs.h
+
+
+ THREAD_CFLAGS="-pthread"
+ LIBS="-pthread"
+ for ac_header in poll.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default"
+if test "x$ac_cv_header_poll_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POLL_H 1
+_ACEOF
+
+fi
+
+done
+
+
+$as_echo "#define POLL_NFDS_TYPE nfds_t" >>confdefs.h
+
+ ;;
+windows)
+
+$as_echo "#define OS_WINDOWS 1" >>confdefs.h
+
+
+ LIBS=""
+ LTLDFLAGS="${LTLDFLAGS} -avoid-version -Wl,--add-stdcall-alias"
+
+$as_echo "#define POLL_NFDS_TYPE unsigned int" >>confdefs.h
+
+
+$as_echo "#define WINVER 0x0501" >>confdefs.h
+
+ ;;
+haiku)
+
+$as_echo "#define OS_HAIKU 1" >>confdefs.h
+
+
+ LIBS="${LIBS} -lbe"
+ for ac_header in poll.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "poll.h" "ac_cv_header_poll_h" "$ac_includes_default"
+if test "x$ac_cv_header_poll_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POLL_H 1
+_ACEOF
+
+fi
+
+done
+
+
+$as_echo "#define POLL_NFDS_TYPE nfds_t" >>confdefs.h
+
+ ;;
+esac
+
+
+
+ if test "x$backend" = xlinux; then
+ OS_LINUX_TRUE=
+ OS_LINUX_FALSE='#'
+else
+ OS_LINUX_TRUE='#'
+ OS_LINUX_FALSE=
+fi
+
+ if test "x$backend" = xdarwin; then
+ OS_DARWIN_TRUE=
+ OS_DARWIN_FALSE='#'
+else
+ OS_DARWIN_TRUE='#'
+ OS_DARWIN_FALSE=
+fi
+
+ if test "x$backend" = xopenbsd; then
+ OS_OPENBSD_TRUE=
+ OS_OPENBSD_FALSE='#'
+else
+ OS_OPENBSD_TRUE='#'
+ OS_OPENBSD_FALSE=
+fi
+
+ if test "x$backend" = xnetbsd; then
+ OS_NETBSD_TRUE=
+ OS_NETBSD_FALSE='#'
+else
+ OS_NETBSD_TRUE='#'
+ OS_NETBSD_FALSE=
+fi
+
+ if test "x$backend" = xwindows; then
+ OS_WINDOWS_TRUE=
+ OS_WINDOWS_FALSE='#'
+else
+ OS_WINDOWS_TRUE='#'
+ OS_WINDOWS_FALSE=
+fi
+
+ if test "x$backend" = xhaiku; then
+ OS_HAIKU_TRUE=
+ OS_HAIKU_FALSE='#'
+else
+ OS_HAIKU_TRUE='#'
+ OS_HAIKU_FALSE=
+fi
+
+ if test "x$threads" = xposix; then
+ THREADS_POSIX_TRUE=
+ THREADS_POSIX_FALSE='#'
+else
+ THREADS_POSIX_TRUE='#'
+ THREADS_POSIX_FALSE=
+fi
+
+ if test "x$create_import_lib" = "xyes"; then
+ CREATE_IMPORT_LIB_TRUE=
+ CREATE_IMPORT_LIB_FALSE='#'
+else
+ CREATE_IMPORT_LIB_TRUE='#'
+ CREATE_IMPORT_LIB_FALSE=
+fi
+
+ if test "x$enable_udev" = xyes; then
+ USE_UDEV_TRUE=
+ USE_UDEV_FALSE='#'
+else
+ USE_UDEV_TRUE='#'
+ USE_UDEV_FALSE=
+fi
+
+if test "$threads" = posix; then
+
+$as_echo "#define THREADS_POSIX 1" >>confdefs.h
+
+fi
+
+# timerfd
+ac_fn_c_check_header_mongrel "$LINENO" "sys/timerfd.h" "ac_cv_header_sys_timerfd_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_timerfd_h" = xyes; then :
+ timerfd_h=1
+else
+ timerfd_h=0
+fi
+
+
+# Check whether --enable-timerfd was given.
+if test "${enable_timerfd+set}" = set; then :
+ enableval=$enable_timerfd; use_timerfd=$enableval
+else
+ use_timerfd='auto'
+fi
+
+
+if test "x$use_timerfd" = "xyes" -a "x$timerfd_h" = "x0"; then
+ as_fn_error $? "timerfd header not available; glibc 2.9+ required" "$LINENO" 5
+fi
+
+ac_fn_c_check_decl "$LINENO" "TFD_NONBLOCK" "ac_cv_have_decl_TFD_NONBLOCK" "#include <sys/timerfd.h>
+"
+if test "x$ac_cv_have_decl_TFD_NONBLOCK" = xyes; then :
+ tfd_hdr_ok=yes
+else
+ tfd_hdr_ok=no
+fi
+
+if test "x$use_timerfd" = "xyes" -a "x$tfd_hdr_ok" = "xno"; then
+ as_fn_error $? "timerfd header not usable; glibc 2.9+ required" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use timerfd for timing" >&5
+$as_echo_n "checking whether to use timerfd for timing... " >&6; }
+if test "x$use_timerfd" = "xno"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no (disabled by user)" >&5
+$as_echo "no (disabled by user)" >&6; }
+else
+ if test "x$timerfd_h" = "x1" -a "x$tfd_hdr_ok" = "xyes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define USBI_TIMERFD_AVAILABLE 1" >>confdefs.h
+
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no (header not available)" >&5
+$as_echo "no (header not available)" >&6; }
+ fi
+fi
+
+ac_fn_c_check_type "$LINENO" "struct timespec" "ac_cv_type_struct_timespec" "$ac_includes_default"
+if test "x$ac_cv_type_struct_timespec" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_TIMESPEC 1
+_ACEOF
+
+
+fi
+
+
+# Message logging
+# Check whether --enable-log was given.
+if test "${enable_log+set}" = set; then :
+ enableval=$enable_log; log_enabled=$enableval
+else
+ log_enabled='yes'
+fi
+
+if test "x$log_enabled" != "xno"; then
+
+$as_echo "#define ENABLE_LOGGING 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-debug-log was given.
+if test "${enable_debug_log+set}" = set; then :
+ enableval=$enable_debug_log; debug_log_enabled=$enableval
+else
+ debug_log_enabled='no'
+fi
+
+if test "x$debug_log_enabled" != "xno"; then
+
+$as_echo "#define ENABLE_DEBUG_LOGGING 1" >>confdefs.h
+
+fi
+
+# Check whether --enable-system-log was given.
+if test "${enable_system_log+set}" = set; then :
+ enableval=$enable_system_log; system_log_enabled=$enableval
+else
+ system_log_enabled='no'
+fi
+
+if test "x$system_log_enabled" != "xno"; then
+
+$as_echo "#define USE_SYSTEM_LOGGING_FACILITY 1" >>confdefs.h
+
+fi
+
+# Check if syslog is available in standard C library
+for ac_header in syslog.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "syslog.h" "ac_cv_header_syslog_h" "$ac_includes_default"
+if test "x$ac_cv_header_syslog_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SYSLOG_H 1
+_ACEOF
+
+fi
+
+done
+
+ac_fn_c_check_func "$LINENO" "syslog" "ac_cv_func_syslog"
+if test "x$ac_cv_func_syslog" = xyes; then :
+ have_syslog=yes
+else
+ have_syslog=no
+fi
+
+if test "x$have_syslog" != "xno"; then
+
+$as_echo "#define HAVE_SYSLOG_FUNC 1" >>confdefs.h
+
+fi
+
+# Examples build
+# Check whether --enable-examples-build was given.
+if test "${enable_examples_build+set}" = set; then :
+ enableval=$enable_examples_build; build_examples=$enableval
+else
+ build_examples='no'
+fi
+
+ if test "x$build_examples" != "xno"; then
+ BUILD_EXAMPLES_TRUE=
+ BUILD_EXAMPLES_FALSE='#'
+else
+ BUILD_EXAMPLES_TRUE='#'
+ BUILD_EXAMPLES_FALSE=
+fi
+
+
+# Tests build
+# Check whether --enable-tests-build was given.
+if test "${enable_tests_build+set}" = set; then :
+ enableval=$enable_tests_build; build_tests=$enableval
+else
+ build_tests='no'
+fi
+
+ if test "x$build_tests" != "xno"; then
+ BUILD_TESTS_TRUE=
+ BUILD_TESTS_FALSE='#'
+else
+ BUILD_TESTS_TRUE='#'
+ BUILD_TESTS_FALSE=
+fi
+
+
+# check for -fvisibility=hidden compiler support (GCC >= 3.4)
+saved_cflags="$CFLAGS"
+# -Werror required for cygwin
+CFLAGS="$CFLAGS -Werror -fvisibility=hidden"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ VISIBILITY_CFLAGS="-fvisibility=hidden"
+
+$as_echo "#define DEFAULT_VISIBILITY __attribute__((visibility(\"default\")))" >>confdefs.h
+
+else
+ VISIBILITY_CFLAGS=""
+
+$as_echo "#define DEFAULT_VISIBILITY /**/" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+CFLAGS="$saved_cflags"
+
+# check for -Wno-pointer-sign compiler support (GCC >= 4)
+saved_cflags="$CFLAGS"
+CFLAGS="$CFLAGS -Wno-pointer-sign"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ nopointersign_cflags="-Wno-pointer-sign"
+else
+ nopointersign_cflags=""
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+CFLAGS="$saved_cflags"
+
+# sigaction not available on MinGW
+ac_fn_c_check_func "$LINENO" "sigaction" "ac_cv_func_sigaction"
+if test "x$ac_cv_func_sigaction" = xyes; then :
+ have_sigaction=yes
+else
+ have_sigaction=no
+fi
+
+ if test "x$have_sigaction" = "xyes"; then
+ HAVE_SIGACTION_TRUE=
+ HAVE_SIGACTION_FALSE='#'
+else
+ HAVE_SIGACTION_TRUE='#'
+ HAVE_SIGACTION_FALSE=
+fi
+
+
+# headers not available on all platforms but required on others
+for ac_header in sys/time.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "sys/time.h" "ac_cv_header_sys_time_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_time_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SYS_TIME_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in gettimeofday
+do :
+ ac_fn_c_check_func "$LINENO" "gettimeofday" "ac_cv_func_gettimeofday"
+if test "x$ac_cv_func_gettimeofday" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_GETTIMEOFDAY 1
+_ACEOF
+
+fi
+done
+
+for ac_header in signal.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "signal.h" "ac_cv_header_signal_h" "$ac_includes_default"
+if test "x$ac_cv_header_signal_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SIGNAL_H 1
+_ACEOF
+
+fi
+
+done
+
+
+# check for -std=gnu99 compiler support
+saved_cflags="$CFLAGS"
+CFLAGS="-std=gnu99"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether CC supports -std=gnu99" >&5
+$as_echo_n "checking whether CC supports -std=gnu99... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ AM_CFLAGS="${AM_CFLAGS} -std=gnu99"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+CFLAGS="$saved_cflags"
+
+AM_CFLAGS="${AM_CFLAGS} -Wall -Wundef -Wunused -Wstrict-prototypes -Werror-implicit-function-declaration $nopointersign_cflags -Wshadow ${THREAD_CFLAGS} ${VISIBILITY_CFLAGS}"
+
+
+
+
+ac_config_files="$ac_config_files libusb-1.0.pc"
+
+ac_config_files="$ac_config_files Makefile"
+
+ac_config_files="$ac_config_files libusb/Makefile"
+
+ac_config_files="$ac_config_files examples/Makefile"
+
+ac_config_files="$ac_config_files tests/Makefile"
+
+ac_config_files="$ac_config_files doc/Makefile"
+
+ac_config_files="$ac_config_files doc/doxygen.cfg"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_LINUX_TRUE}" && test -z "${OS_LINUX_FALSE}"; then
+ as_fn_error $? "conditional \"OS_LINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_DARWIN_TRUE}" && test -z "${OS_DARWIN_FALSE}"; then
+ as_fn_error $? "conditional \"OS_DARWIN\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_OPENBSD_TRUE}" && test -z "${OS_OPENBSD_FALSE}"; then
+ as_fn_error $? "conditional \"OS_OPENBSD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_NETBSD_TRUE}" && test -z "${OS_NETBSD_FALSE}"; then
+ as_fn_error $? "conditional \"OS_NETBSD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_WINDOWS_TRUE}" && test -z "${OS_WINDOWS_FALSE}"; then
+ as_fn_error $? "conditional \"OS_WINDOWS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OS_HAIKU_TRUE}" && test -z "${OS_HAIKU_FALSE}"; then
+ as_fn_error $? "conditional \"OS_HAIKU\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${THREADS_POSIX_TRUE}" && test -z "${THREADS_POSIX_FALSE}"; then
+ as_fn_error $? "conditional \"THREADS_POSIX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${CREATE_IMPORT_LIB_TRUE}" && test -z "${CREATE_IMPORT_LIB_FALSE}"; then
+ as_fn_error $? "conditional \"CREATE_IMPORT_LIB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_UDEV_TRUE}" && test -z "${USE_UDEV_FALSE}"; then
+ as_fn_error $? "conditional \"USE_UDEV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_EXAMPLES_TRUE}" && test -z "${BUILD_EXAMPLES_FALSE}"; then
+ as_fn_error $? "conditional \"BUILD_EXAMPLES\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_TESTS_TRUE}" && test -z "${BUILD_TESTS_FALSE}"; then
+ as_fn_error $? "conditional \"BUILD_TESTS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SIGACTION_TRUE}" && test -z "${HAVE_SIGACTION_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SIGACTION\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libusb $as_me 1.0.20, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <libusb-devel@lists.sourceforge.net>.
+libusb home page: <http://libusb.info>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libusb config.status 1.0.20
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+LD_RC='`$ECHO "$LD_RC" | $SED "$delay_single_quote_subst"`'
+reload_flag_RC='`$ECHO "$reload_flag_RC" | $SED "$delay_single_quote_subst"`'
+reload_cmds_RC='`$ECHO "$reload_cmds_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_RC='`$ECHO "$old_archive_cmds_RC" | $SED "$delay_single_quote_subst"`'
+compiler_RC='`$ECHO "$compiler_RC" | $SED "$delay_single_quote_subst"`'
+GCC_RC='`$ECHO "$GCC_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_RC='`$ECHO "$lt_prog_compiler_no_builtin_flag_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_RC='`$ECHO "$lt_prog_compiler_pic_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_RC='`$ECHO "$lt_prog_compiler_wl_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_RC='`$ECHO "$lt_prog_compiler_static_RC" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_RC='`$ECHO "$lt_cv_prog_compiler_c_o_RC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_RC='`$ECHO "$archive_cmds_need_lc_RC" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_RC='`$ECHO "$enable_shared_with_static_runtimes_RC" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_RC='`$ECHO "$export_dynamic_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_RC='`$ECHO "$whole_archive_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_RC='`$ECHO "$compiler_needs_object_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_RC='`$ECHO "$old_archive_from_new_cmds_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_RC='`$ECHO "$old_archive_from_expsyms_cmds_RC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_RC='`$ECHO "$archive_cmds_RC" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_RC='`$ECHO "$archive_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`'
+module_cmds_RC='`$ECHO "$module_cmds_RC" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_RC='`$ECHO "$module_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_RC='`$ECHO "$with_gnu_ld_RC" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_RC='`$ECHO "$allow_undefined_flag_RC" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_RC='`$ECHO "$no_undefined_flag_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_RC='`$ECHO "$hardcode_libdir_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_RC='`$ECHO "$hardcode_libdir_separator_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_RC='`$ECHO "$hardcode_direct_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_RC='`$ECHO "$hardcode_direct_absolute_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_RC='`$ECHO "$hardcode_minus_L_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_RC='`$ECHO "$hardcode_shlibpath_var_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_RC='`$ECHO "$hardcode_automatic_RC" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_RC='`$ECHO "$inherit_rpath_RC" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_RC='`$ECHO "$link_all_deplibs_RC" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_RC='`$ECHO "$always_export_symbols_RC" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_RC='`$ECHO "$export_symbols_cmds_RC" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_RC='`$ECHO "$exclude_expsyms_RC" | $SED "$delay_single_quote_subst"`'
+include_expsyms_RC='`$ECHO "$include_expsyms_RC" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_RC='`$ECHO "$prelink_cmds_RC" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_RC='`$ECHO "$postlink_cmds_RC" | $SED "$delay_single_quote_subst"`'
+file_list_spec_RC='`$ECHO "$file_list_spec_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_action_RC='`$ECHO "$hardcode_action_RC" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+LD_RC \
+reload_flag_RC \
+compiler_RC \
+lt_prog_compiler_no_builtin_flag_RC \
+lt_prog_compiler_pic_RC \
+lt_prog_compiler_wl_RC \
+lt_prog_compiler_static_RC \
+lt_cv_prog_compiler_c_o_RC \
+export_dynamic_flag_spec_RC \
+whole_archive_flag_spec_RC \
+compiler_needs_object_RC \
+with_gnu_ld_RC \
+allow_undefined_flag_RC \
+no_undefined_flag_RC \
+hardcode_libdir_flag_spec_RC \
+hardcode_libdir_separator_RC \
+exclude_expsyms_RC \
+include_expsyms_RC \
+file_list_spec_RC; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_RC \
+old_archive_cmds_RC \
+old_archive_from_new_cmds_RC \
+old_archive_from_expsyms_cmds_RC \
+archive_cmds_RC \
+archive_expsym_cmds_RC \
+module_cmds_RC \
+module_expsym_cmds_RC \
+export_symbols_cmds_RC \
+prelink_cmds_RC \
+postlink_cmds_RC; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "libusb-1.0.pc") CONFIG_FILES="$CONFIG_FILES libusb-1.0.pc" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "libusb/Makefile") CONFIG_FILES="$CONFIG_FILES libusb/Makefile" ;;
+ "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
+ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+ "doc/doxygen.cfg") CONFIG_FILES="$CONFIG_FILES doc/doxygen.cfg" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = "\a"
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="RC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: RC
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_RC
+reload_cmds=$lt_reload_cmds_RC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_RC
+
+# A language specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_RC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_RC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_RC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_RC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_RC
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_RC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_RC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# ### END LIBTOOL TAG CONFIG: RC
+_LT_EOF
+
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+
+#
+# CONFIG_SUBDIRS section.
+#
+if test "$no_recursion" != yes; then
+
+ # Remove --cache-file, --srcdir, and --disable-option-checking arguments
+ # so they do not pile up.
+ ac_sub_configure_args=
+ ac_prev=
+ eval "set x $ac_configure_args"
+ shift
+ for ac_arg
+ do
+ if test -n "$ac_prev"; then
+ ac_prev=
+ continue
+ fi
+ case $ac_arg in
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
+ | --c=*)
+ ;;
+ --config-cache | -C)
+ ;;
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ ;;
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ ;;
+ --disable-option-checking)
+ ;;
+ *)
+ case $ac_arg in
+ *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
+ esac
+ done
+
+ # Always prepend --prefix to ensure using the same prefix
+ # in subdir configurations.
+ ac_arg="--prefix=$prefix"
+ case $ac_arg in
+ *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+ # Pass --silent
+ if test "$silent" = yes; then
+ ac_sub_configure_args="--silent $ac_sub_configure_args"
+ fi
+
+ # Always prepend --disable-option-checking to silence warnings, since
+ # different subdirs can have different --enable and --with options.
+ ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
+
+ ac_popdir=`pwd`
+ for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
+
+ # Do not complain, so a configure script can configure whichever
+ # parts of a large source tree are present.
+ test -d "$srcdir/$ac_dir" || continue
+
+ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
+ $as_echo "$ac_msg" >&6
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ cd "$ac_dir"
+
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ ac_sub_configure=$ac_srcdir/configure.gnu
+ elif test -f "$ac_srcdir/configure"; then
+ ac_sub_configure=$ac_srcdir/configure
+ elif test -f "$ac_srcdir/configure.in"; then
+ # This should be Cygnus configure.
+ ac_sub_configure=$ac_aux_dir/configure
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5
+$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+ ac_sub_configure=
+ fi
+
+ # The recursion is here.
+ if test -n "$ac_sub_configure"; then
+ # Make the cache file name correct relative to the subdirectory.
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
+ *) # Relative name.
+ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+ # The eval makes quoting arguments work.
+ eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
+ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+ as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
+ fi
+
+ cd "$ac_popdir"
+ done
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
--- /dev/null
+dnl These m4 macros are whitespace sensitive and break if moved around much.
+m4_define([LU_VERSION_H], m4_include([libusb/version.h]))
+m4_define([LU_DEFINE_VERSION_ATOM],
+ [m4_define([$1], m4_bregexp(LU_VERSION_H,
+ [^#define\s*$1\s*\([0-9]*\).*], [\1]))])
+m4_define([LU_DEFINE_VERSION_RC_ATOM],
+ [m4_define([$1], m4_bregexp(LU_VERSION_H,
+ [^#define\s*$1\s*"\(-rc[0-9]*\)".*], [\1]))])
+dnl The m4_bregexp() returns (only) the numbers following the #define named
+dnl in the first macro parameter. m4_define() then defines the name for use
+dnl in AC_INIT.
+
+LU_DEFINE_VERSION_ATOM([LIBUSB_MAJOR])
+LU_DEFINE_VERSION_ATOM([LIBUSB_MINOR])
+LU_DEFINE_VERSION_ATOM([LIBUSB_MICRO])
+LU_DEFINE_VERSION_RC_ATOM([LIBUSB_RC])
+
+AC_INIT([libusb],[LIBUSB_MAJOR[.]LIBUSB_MINOR[.]LIBUSB_MICRO[]LIBUSB_RC],[libusb-devel@lists.sourceforge.net],[libusb],[http://libusb.info])
+
+# Library versioning
+# These numbers should be tweaked on every release. Read carefully:
+# http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
+# http://sourceware.org/autobook/autobook/autobook_91.html
+lt_current="1"
+lt_revision="0"
+lt_age="1"
+LTLDFLAGS="-version-info ${lt_current}:${lt_revision}:${lt_age}"
+
+AM_INIT_AUTOMAKE
+AM_MAINTAINER_MODE
+
+AC_CONFIG_SRCDIR([libusb/core.c])
+AC_CONFIG_MACRO_DIR([m4])
+AC_CONFIG_HEADERS([config.h])
+m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
+
+AC_PREREQ([2.50])
+AC_PROG_CC
+LT_INIT
+LT_LANG([Windows Resource])
+AC_C_INLINE
+AM_PROG_CC_C_O
+AC_DEFINE([_GNU_SOURCE], 1, [Use GNU extensions])
+
+LTLDFLAGS="${LTLDFLAGS} -no-undefined"
+
+AC_MSG_CHECKING([operating system])
+
+dnl on linux-android platform, some functions are in different places
+case $host in
+*-linux-android*)
+ AC_MSG_RESULT([This is a Linux-Android system])
+ is_backend_android="yes"
+ ;;
+*)
+ is_backend_android="no"
+esac
+
+case $host in
+*-linux* | *-uclinux*)
+ AC_MSG_RESULT([Linux])
+ backend="linux"
+ threads="posix"
+ ;;
+*-darwin*)
+ AC_MSG_RESULT([Darwin/Mac OS X])
+ backend="darwin"
+ threads="posix"
+ ;;
+*-openbsd*)
+ AC_MSG_RESULT([OpenBSD])
+ backend="openbsd"
+ threads="posix"
+ ;;
+*-netbsd*)
+ AC_MSG_RESULT([NetBSD])
+ backend="netbsd"
+ threads="posix"
+ ;;
+*-mingw*)
+ AC_MSG_RESULT([Windows])
+ backend="windows"
+ threads="windows"
+ create_import_lib="yes"
+ AM_CFLAGS="${AM_CFLAGS} -fno-omit-frame-pointer"
+ ;;
+*-cygwin*)
+ AC_MSG_RESULT([Cygwin (using Windows backend)])
+ backend="windows"
+ threads="posix"
+ ;;
+*-haiku*)
+ AC_MSG_RESULT([Haiku])
+ AC_CONFIG_SUBDIRS([libusb/os/haiku])
+ backend="haiku"
+ threads="posix"
+ ;;
+*)
+ AC_MSG_ERROR([unsupported operating system])
+esac
+
+case $backend in
+linux)
+ AC_DEFINE(OS_LINUX, 1, [Linux backend])
+ AC_SUBST(OS_LINUX)
+ AC_SEARCH_LIBS(clock_gettime, rt, [], [], -pthread)
+ AC_ARG_ENABLE([udev],
+ [AC_HELP_STRING([--enable-udev], [use udev for device enumeration and hotplug support (recommended) [default=yes]])],
+ [], [enable_udev="yes"])
+ if test "x$enable_udev" = "xyes" ; then
+ # system has udev. use it or fail!
+ AC_CHECK_HEADERS([libudev.h],[],[AC_ERROR(["udev support requested but libudev not installed"])])
+ AC_CHECK_LIB([udev], [udev_new], [], [AC_ERROR(["udev support requested but libudev not installed"])])
+ AC_DEFINE(USE_UDEV, 1, [Use udev for device enumeration/hotplug])
+ else
+ AC_CHECK_HEADERS([asm/types.h sys/socket.h], [], [])
+ AC_CHECK_HEADERS([linux/netlink.h linux/filter.h], [], [AC_ERROR(["Linux netlink headers not found"])], [
+#ifdef HAVE_ASM_TYPES_H
+#include <asm/types.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+])
+ fi
+ AC_SUBST(USE_UDEV)
+
+case $is_backend_android in
+yes)
+ dnl there are gettimeofday function but configure doesn't seem to be able to find it.
+ AC_DEFINE([HAVE_GETTIMEOFDAY], [1], [Define if you have gettimeofday])
+ ;;
+*)
+ THREAD_CFLAGS="-pthread"
+ LIBS="${LIBS} -pthread"
+esac
+
+ AC_CHECK_HEADERS([poll.h])
+ AC_DEFINE([POLL_NFDS_TYPE],[nfds_t],[type of second poll() argument])
+ ;;
+darwin)
+ AC_DEFINE(OS_DARWIN, 1, [Darwin backend])
+ AC_SUBST(OS_DARWIN)
+ LIBS="-lobjc -Wl,-framework,IOKit -Wl,-framework,CoreFoundation"
+ LTLDFLAGS="${LTLDFLAGS} -Wl,-prebind"
+ AC_CHECK_HEADERS([poll.h])
+ AC_CHECK_TYPE([nfds_t],
+ [AC_DEFINE([POLL_NFDS_TYPE],[nfds_t],[type of second poll() argument])],
+ [AC_DEFINE([POLL_NFDS_TYPE],[unsigned int],[type of second poll() argument])],
+ [#include <poll.h>])
+ ;;
+openbsd)
+ AC_DEFINE(OS_OPENBSD, 1, [OpenBSD backend])
+ AC_SUBST(OS_OPENBSD)
+ THREAD_CFLAGS="-pthread"
+ LIBS="-pthread"
+ AC_CHECK_HEADERS([poll.h])
+ AC_DEFINE([POLL_NFDS_TYPE],[nfds_t],[type of second poll() argument])
+ ;;
+netbsd)
+ AC_DEFINE(OS_NETBSD, 1, [NetBSD backend])
+ AC_SUBST(OS_NETBSD)
+ THREAD_CFLAGS="-pthread"
+ LIBS="-pthread"
+ AC_CHECK_HEADERS([poll.h])
+ AC_DEFINE([POLL_NFDS_TYPE],[nfds_t],[type of second poll() argument])
+ ;;
+windows)
+ AC_DEFINE(OS_WINDOWS, 1, [Windows backend])
+ AC_SUBST(OS_WINDOWS)
+ LIBS=""
+ LTLDFLAGS="${LTLDFLAGS} -avoid-version -Wl,--add-stdcall-alias"
+ AC_DEFINE([POLL_NFDS_TYPE],[unsigned int],[type of second poll() argument])
+ AC_DEFINE([WINVER], 0x0501, [Oldest Windows version supported])
+ ;;
+haiku)
+ AC_DEFINE(OS_HAIKU, 1, [Haiku backend])
+ AC_SUBST(OS_HAIKU)
+ LIBS="${LIBS} -lbe"
+ AC_CHECK_HEADERS([poll.h])
+ AC_DEFINE([POLL_NFDS_TYPE],[nfds_t],[type of second poll() argument])
+ ;;
+esac
+
+AC_SUBST(LIBS)
+
+AM_CONDITIONAL(OS_LINUX, test "x$backend" = xlinux)
+AM_CONDITIONAL(OS_DARWIN, test "x$backend" = xdarwin)
+AM_CONDITIONAL(OS_OPENBSD, test "x$backend" = xopenbsd)
+AM_CONDITIONAL(OS_NETBSD, test "x$backend" = xnetbsd)
+AM_CONDITIONAL(OS_WINDOWS, test "x$backend" = xwindows)
+AM_CONDITIONAL(OS_HAIKU, test "x$backend" = xhaiku)
+AM_CONDITIONAL(THREADS_POSIX, test "x$threads" = xposix)
+AM_CONDITIONAL(CREATE_IMPORT_LIB, test "x$create_import_lib" = "xyes")
+AM_CONDITIONAL(USE_UDEV, test "x$enable_udev" = xyes)
+if test "$threads" = posix; then
+ AC_DEFINE(THREADS_POSIX, 1, [Use POSIX Threads])
+fi
+
+# timerfd
+AC_CHECK_HEADER([sys/timerfd.h], [timerfd_h=1], [timerfd_h=0])
+AC_ARG_ENABLE([timerfd],
+ [AS_HELP_STRING([--enable-timerfd],
+ [use timerfd for timing [default=auto]])],
+ [use_timerfd=$enableval], [use_timerfd='auto'])
+
+if test "x$use_timerfd" = "xyes" -a "x$timerfd_h" = "x0"; then
+ AC_MSG_ERROR([timerfd header not available; glibc 2.9+ required])
+fi
+
+AC_CHECK_DECL([TFD_NONBLOCK], [tfd_hdr_ok=yes], [tfd_hdr_ok=no], [#include <sys/timerfd.h>])
+if test "x$use_timerfd" = "xyes" -a "x$tfd_hdr_ok" = "xno"; then
+ AC_MSG_ERROR([timerfd header not usable; glibc 2.9+ required])
+fi
+
+AC_MSG_CHECKING([whether to use timerfd for timing])
+if test "x$use_timerfd" = "xno"; then
+ AC_MSG_RESULT([no (disabled by user)])
+else
+ if test "x$timerfd_h" = "x1" -a "x$tfd_hdr_ok" = "xyes"; then
+ AC_MSG_RESULT([yes])
+ AC_DEFINE(USBI_TIMERFD_AVAILABLE, 1, [timerfd headers available])
+ else
+ AC_MSG_RESULT([no (header not available)])
+ fi
+fi
+
+AC_CHECK_TYPES(struct timespec)
+
+# Message logging
+AC_ARG_ENABLE([log], [AS_HELP_STRING([--disable-log], [disable all logging])],
+ [log_enabled=$enableval],
+ [log_enabled='yes'])
+if test "x$log_enabled" != "xno"; then
+ AC_DEFINE([ENABLE_LOGGING], 1, [Message logging])
+fi
+
+AC_ARG_ENABLE([debug-log], [AS_HELP_STRING([--enable-debug-log],
+ [start with debug message logging enabled [default=no]])],
+ [debug_log_enabled=$enableval],
+ [debug_log_enabled='no'])
+if test "x$debug_log_enabled" != "xno"; then
+ AC_DEFINE([ENABLE_DEBUG_LOGGING], 1, [Start with debug message logging enabled])
+fi
+
+AC_ARG_ENABLE([system-log], [AS_HELP_STRING([--enable-system-log],
+ [output logging messages to system wide log, if supported by the OS [default=no]])],
+ [system_log_enabled=$enableval],
+ [system_log_enabled='no'])
+if test "x$system_log_enabled" != "xno"; then
+ AC_DEFINE([USE_SYSTEM_LOGGING_FACILITY], 1, [Enable output to system log])
+fi
+
+# Check if syslog is available in standard C library
+AC_CHECK_HEADERS(syslog.h)
+AC_CHECK_FUNC([syslog], [have_syslog=yes], [have_syslog=no])
+if test "x$have_syslog" != "xno"; then
+ AC_DEFINE([HAVE_SYSLOG_FUNC], 1, [syslog() function available])
+fi
+
+# Examples build
+AC_ARG_ENABLE([examples-build], [AS_HELP_STRING([--enable-examples-build],
+ [build example applications [default=no]])],
+ [build_examples=$enableval],
+ [build_examples='no'])
+AM_CONDITIONAL([BUILD_EXAMPLES], [test "x$build_examples" != "xno"])
+
+# Tests build
+AC_ARG_ENABLE([tests-build], [AS_HELP_STRING([--enable-tests-build],
+ [build test applications [default=no]])],
+ [build_tests=$enableval],
+ [build_tests='no'])
+AM_CONDITIONAL([BUILD_TESTS], [test "x$build_tests" != "xno"])
+
+# check for -fvisibility=hidden compiler support (GCC >= 3.4)
+saved_cflags="$CFLAGS"
+# -Werror required for cygwin
+CFLAGS="$CFLAGS -Werror -fvisibility=hidden"
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+ [VISIBILITY_CFLAGS="-fvisibility=hidden"
+ AC_DEFINE([DEFAULT_VISIBILITY], [__attribute__((visibility("default")))], [Default visibility]) ],
+ [ VISIBILITY_CFLAGS=""
+ AC_DEFINE([DEFAULT_VISIBILITY], [], [Default visibility]) ],
+ ])
+CFLAGS="$saved_cflags"
+
+# check for -Wno-pointer-sign compiler support (GCC >= 4)
+saved_cflags="$CFLAGS"
+CFLAGS="$CFLAGS -Wno-pointer-sign"
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+ nopointersign_cflags="-Wno-pointer-sign", nopointersign_cflags="")
+CFLAGS="$saved_cflags"
+
+# sigaction not available on MinGW
+AC_CHECK_FUNC([sigaction], [have_sigaction=yes], [have_sigaction=no])
+AM_CONDITIONAL([HAVE_SIGACTION], [test "x$have_sigaction" = "xyes"])
+
+# headers not available on all platforms but required on others
+AC_CHECK_HEADERS([sys/time.h])
+AC_CHECK_FUNCS(gettimeofday)
+AC_CHECK_HEADERS([signal.h])
+
+# check for -std=gnu99 compiler support
+saved_cflags="$CFLAGS"
+CFLAGS="-std=gnu99"
+AC_MSG_CHECKING([whether CC supports -std=gnu99])
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([])],
+ [AC_MSG_RESULT([yes])]
+ [AM_CFLAGS="${AM_CFLAGS} -std=gnu99"],
+ [AC_MSG_RESULT([no])]
+)
+CFLAGS="$saved_cflags"
+
+AM_CFLAGS="${AM_CFLAGS} -Wall -Wundef -Wunused -Wstrict-prototypes -Werror-implicit-function-declaration $nopointersign_cflags -Wshadow ${THREAD_CFLAGS} ${VISIBILITY_CFLAGS}"
+
+AC_SUBST(AM_CFLAGS)
+AC_SUBST(LTLDFLAGS)
+
+AC_CONFIG_FILES([libusb-1.0.pc])
+AC_CONFIG_FILES([Makefile])
+AC_CONFIG_FILES([libusb/Makefile])
+AC_CONFIG_FILES([examples/Makefile])
+AC_CONFIG_FILES([tests/Makefile])
+AC_CONFIG_FILES([doc/Makefile])
+AC_CONFIG_FILES([doc/doxygen.cfg])
+AC_OUTPUT
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\' :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+EXTRA_DIST = doxygen.cfg.in
+
+docs: doxygen.cfg
+ doxygen $^
+
+docs-upload: docs
+ ln -s html api-1.0
+ scp -r api-1.0 pbatard@web.sourceforge.net:/home/project-web/libusb/htdocs
+ rm -f api-1.0
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/libusb/version.h $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = doxygen.cfg
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/doxygen.cfg.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLDFLAGS = @LTLDFLAGS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OS_DARWIN = @OS_DARWIN@
+OS_HAIKU = @OS_HAIKU@
+OS_LINUX = @OS_LINUX@
+OS_NETBSD = @OS_NETBSD@
+OS_OPENBSD = @OS_OPENBSD@
+OS_WINDOWS = @OS_WINDOWS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_UDEV = @USE_UDEV@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = doxygen.cfg.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu doc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+doxygen.cfg: $(top_builddir)/config.status $(srcdir)/doxygen.cfg.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ cscopelist-am ctags-am distclean distclean-generic \
+ distclean-libtool distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+docs: doxygen.cfg
+ doxygen $^
+
+docs-upload: docs
+ ln -s html api-1.0
+ scp -r api-1.0 pbatard@web.sourceforge.net:/home/project-web/libusb/htdocs
+ rm -f api-1.0
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# Doxyfile 1.8.8
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all text
+# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
+# for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME =
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER =
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF = "A cross-platform user library to access USB devices"
+
+# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
+# the documentation. The maximum height of the logo should not exceed 55 pixels
+# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
+# to the output directory.
+
+PROJECT_LOGO = libusb.png
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY =
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES = NO
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
+# new page for each member. If set to NO, the documentation of a member will be
+# part of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE = 4
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines.
+
+ALIASES =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
+# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
+# Fortran. In the later case the parser tries to guess whether the code is fixed
+# or free formatted code, this is the default for Fortran type files), VHDL. For
+# instance to make doxygen treat .inc files as Fortran files (default is PHP),
+# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+#
+# Note For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT = YES
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by by putting a % sign in front of the word
+# or globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO these classes will be included in the various overviews. This option has
+# no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS = NO
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING = NO
+
+# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
+# todo list. This list is created by putting \todo commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
+# test list. This list is created by putting \test commands in the
+# documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES the list
+# will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO doxygen will only warn about wrong or incomplete parameter
+# documentation, but not about the absence of documentation.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces.
+# Note: If this tag is empty the current directory is searched.
+
+INPUT = @top_srcdir@/libusb
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank the
+# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# *.qsf, *.as and *.js.
+
+FILE_PATTERNS =
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE = @top_srcdir@/libusb/libusbi.h \
+ @top_srcdir@/libusb/hotplug.h
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER ) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# function all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see http://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX = YES
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefor more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra stylesheet files is of importance (e.g. the last
+# stylesheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the stylesheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
+# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler ( hhc.exe). If non-empty
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated (
+# YES) or that it should be included in the master .chm file ( NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated (
+# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# http://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using prerendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer ( doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when enabling USE_PDFLATEX this option is only used for generating
+# bitmaps for formulas in the HTML output, but not in the Makefile that is
+# written to the output directory.
+# The default file is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. To get the times font for
+# instance you can specify
+# EXTRA_PACKAGES=times
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
+# for the replacement values of the other commands the user is refered to
+# HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS = NO
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE = plain
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's config
+# file, i.e. a series of assignments. You only have to provide replacements,
+# missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's config file. A template extensions file can be generated
+# using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
+# Definitions (see http://autogen.sf.net) file that captures the structure of
+# the code including all documentation. Note that this feature is still
+# experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
+# in the source code. If set to NO only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF = YES
+
+# If the SEARCH_INCLUDES tag is set to YES the includes files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED = API_EXPORTED= \
+ LIBUSB_CALL= \
+ DEFAULT_VISIBILITY=
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
+# class index. If set to NO only the inherited external classes will be listed.
+# The default value is: NO.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
+# the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS = YES
+
+# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of 'which perl').
+# The default file (with absolute path) is: /usr/bin/perl.
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see:
+# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: NO.
+
+HAVE_DOT = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME = Helvetica
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH = YES
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot.
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, jpg, gif and svg.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT = png
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+PLANTUML_JAR_PATH =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP = YES
--- /dev/null
+AM_CPPFLAGS = -I$(top_srcdir)/libusb
+LDADD = ../libusb/libusb-1.0.la
+
+noinst_PROGRAMS = listdevs xusb fxload hotplugtest
+
+if HAVE_SIGACTION
+noinst_PROGRAMS += dpfp
+
+if THREADS_POSIX
+dpfp_threaded_CFLAGS = $(AM_CFLAGS)
+noinst_PROGRAMS += dpfp_threaded
+endif
+
+sam3u_benchmark_SOURCES = sam3u_benchmark.c
+noinst_PROGRAMS += sam3u_benchmark
+endif
+
+fxload_SOURCES = ezusb.c ezusb.h fxload.c
+fxload_CFLAGS = $(THREAD_CFLAGS) $(AM_CFLAGS)
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+noinst_PROGRAMS = listdevs$(EXEEXT) xusb$(EXEEXT) fxload$(EXEEXT) \
+ hotplugtest$(EXEEXT) $(am__EXEEXT_1) $(am__EXEEXT_2) \
+ $(am__EXEEXT_3)
+@HAVE_SIGACTION_TRUE@am__append_1 = dpfp
+@HAVE_SIGACTION_TRUE@@THREADS_POSIX_TRUE@am__append_2 = dpfp_threaded
+@HAVE_SIGACTION_TRUE@am__append_3 = sam3u_benchmark
+subdir = examples
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/libusb/version.h $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+@HAVE_SIGACTION_TRUE@am__EXEEXT_1 = dpfp$(EXEEXT)
+@HAVE_SIGACTION_TRUE@@THREADS_POSIX_TRUE@am__EXEEXT_2 = dpfp_threaded$(EXEEXT)
+@HAVE_SIGACTION_TRUE@am__EXEEXT_3 = sam3u_benchmark$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+dpfp_SOURCES = dpfp.c
+dpfp_OBJECTS = dpfp.$(OBJEXT)
+dpfp_LDADD = $(LDADD)
+dpfp_DEPENDENCIES = ../libusb/libusb-1.0.la
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+dpfp_threaded_SOURCES = dpfp_threaded.c
+dpfp_threaded_OBJECTS = dpfp_threaded-dpfp_threaded.$(OBJEXT)
+dpfp_threaded_LDADD = $(LDADD)
+dpfp_threaded_DEPENDENCIES = ../libusb/libusb-1.0.la
+dpfp_threaded_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(dpfp_threaded_CFLAGS) \
+ $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+am_fxload_OBJECTS = fxload-ezusb.$(OBJEXT) fxload-fxload.$(OBJEXT)
+fxload_OBJECTS = $(am_fxload_OBJECTS)
+fxload_LDADD = $(LDADD)
+fxload_DEPENDENCIES = ../libusb/libusb-1.0.la
+fxload_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(fxload_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+hotplugtest_SOURCES = hotplugtest.c
+hotplugtest_OBJECTS = hotplugtest.$(OBJEXT)
+hotplugtest_LDADD = $(LDADD)
+hotplugtest_DEPENDENCIES = ../libusb/libusb-1.0.la
+listdevs_SOURCES = listdevs.c
+listdevs_OBJECTS = listdevs.$(OBJEXT)
+listdevs_LDADD = $(LDADD)
+listdevs_DEPENDENCIES = ../libusb/libusb-1.0.la
+am__sam3u_benchmark_SOURCES_DIST = sam3u_benchmark.c
+@HAVE_SIGACTION_TRUE@am_sam3u_benchmark_OBJECTS = \
+@HAVE_SIGACTION_TRUE@ sam3u_benchmark.$(OBJEXT)
+sam3u_benchmark_OBJECTS = $(am_sam3u_benchmark_OBJECTS)
+sam3u_benchmark_LDADD = $(LDADD)
+sam3u_benchmark_DEPENDENCIES = ../libusb/libusb-1.0.la
+xusb_SOURCES = xusb.c
+xusb_OBJECTS = xusb.$(OBJEXT)
+xusb_LDADD = $(LDADD)
+xusb_DEPENDENCIES = ../libusb/libusb-1.0.la
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = dpfp.c dpfp_threaded.c $(fxload_SOURCES) hotplugtest.c \
+ listdevs.c $(sam3u_benchmark_SOURCES) xusb.c
+DIST_SOURCES = dpfp.c dpfp_threaded.c $(fxload_SOURCES) hotplugtest.c \
+ listdevs.c $(am__sam3u_benchmark_SOURCES_DIST) xusb.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLDFLAGS = @LTLDFLAGS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OS_DARWIN = @OS_DARWIN@
+OS_HAIKU = @OS_HAIKU@
+OS_LINUX = @OS_LINUX@
+OS_NETBSD = @OS_NETBSD@
+OS_OPENBSD = @OS_OPENBSD@
+OS_WINDOWS = @OS_WINDOWS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_UDEV = @USE_UDEV@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = -I$(top_srcdir)/libusb
+LDADD = ../libusb/libusb-1.0.la
+@HAVE_SIGACTION_TRUE@@THREADS_POSIX_TRUE@dpfp_threaded_CFLAGS = $(AM_CFLAGS)
+@HAVE_SIGACTION_TRUE@sam3u_benchmark_SOURCES = sam3u_benchmark.c
+fxload_SOURCES = ezusb.c ezusb.h fxload.c
+fxload_CFLAGS = $(THREAD_CFLAGS) $(AM_CFLAGS)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu examples/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstPROGRAMS:
+ @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+
+dpfp$(EXEEXT): $(dpfp_OBJECTS) $(dpfp_DEPENDENCIES) $(EXTRA_dpfp_DEPENDENCIES)
+ @rm -f dpfp$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(dpfp_OBJECTS) $(dpfp_LDADD) $(LIBS)
+
+dpfp_threaded$(EXEEXT): $(dpfp_threaded_OBJECTS) $(dpfp_threaded_DEPENDENCIES) $(EXTRA_dpfp_threaded_DEPENDENCIES)
+ @rm -f dpfp_threaded$(EXEEXT)
+ $(AM_V_CCLD)$(dpfp_threaded_LINK) $(dpfp_threaded_OBJECTS) $(dpfp_threaded_LDADD) $(LIBS)
+
+fxload$(EXEEXT): $(fxload_OBJECTS) $(fxload_DEPENDENCIES) $(EXTRA_fxload_DEPENDENCIES)
+ @rm -f fxload$(EXEEXT)
+ $(AM_V_CCLD)$(fxload_LINK) $(fxload_OBJECTS) $(fxload_LDADD) $(LIBS)
+
+hotplugtest$(EXEEXT): $(hotplugtest_OBJECTS) $(hotplugtest_DEPENDENCIES) $(EXTRA_hotplugtest_DEPENDENCIES)
+ @rm -f hotplugtest$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(hotplugtest_OBJECTS) $(hotplugtest_LDADD) $(LIBS)
+
+listdevs$(EXEEXT): $(listdevs_OBJECTS) $(listdevs_DEPENDENCIES) $(EXTRA_listdevs_DEPENDENCIES)
+ @rm -f listdevs$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(listdevs_OBJECTS) $(listdevs_LDADD) $(LIBS)
+
+sam3u_benchmark$(EXEEXT): $(sam3u_benchmark_OBJECTS) $(sam3u_benchmark_DEPENDENCIES) $(EXTRA_sam3u_benchmark_DEPENDENCIES)
+ @rm -f sam3u_benchmark$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(sam3u_benchmark_OBJECTS) $(sam3u_benchmark_LDADD) $(LIBS)
+
+xusb$(EXEEXT): $(xusb_OBJECTS) $(xusb_DEPENDENCIES) $(EXTRA_xusb_DEPENDENCIES)
+ @rm -f xusb$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(xusb_OBJECTS) $(xusb_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dpfp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dpfp_threaded-dpfp_threaded.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fxload-ezusb.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fxload-fxload.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hotplugtest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/listdevs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sam3u_benchmark.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xusb.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+dpfp_threaded-dpfp_threaded.o: dpfp_threaded.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpfp_threaded_CFLAGS) $(CFLAGS) -MT dpfp_threaded-dpfp_threaded.o -MD -MP -MF $(DEPDIR)/dpfp_threaded-dpfp_threaded.Tpo -c -o dpfp_threaded-dpfp_threaded.o `test -f 'dpfp_threaded.c' || echo '$(srcdir)/'`dpfp_threaded.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/dpfp_threaded-dpfp_threaded.Tpo $(DEPDIR)/dpfp_threaded-dpfp_threaded.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dpfp_threaded.c' object='dpfp_threaded-dpfp_threaded.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpfp_threaded_CFLAGS) $(CFLAGS) -c -o dpfp_threaded-dpfp_threaded.o `test -f 'dpfp_threaded.c' || echo '$(srcdir)/'`dpfp_threaded.c
+
+dpfp_threaded-dpfp_threaded.obj: dpfp_threaded.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpfp_threaded_CFLAGS) $(CFLAGS) -MT dpfp_threaded-dpfp_threaded.obj -MD -MP -MF $(DEPDIR)/dpfp_threaded-dpfp_threaded.Tpo -c -o dpfp_threaded-dpfp_threaded.obj `if test -f 'dpfp_threaded.c'; then $(CYGPATH_W) 'dpfp_threaded.c'; else $(CYGPATH_W) '$(srcdir)/dpfp_threaded.c'; fi`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/dpfp_threaded-dpfp_threaded.Tpo $(DEPDIR)/dpfp_threaded-dpfp_threaded.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='dpfp_threaded.c' object='dpfp_threaded-dpfp_threaded.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpfp_threaded_CFLAGS) $(CFLAGS) -c -o dpfp_threaded-dpfp_threaded.obj `if test -f 'dpfp_threaded.c'; then $(CYGPATH_W) 'dpfp_threaded.c'; else $(CYGPATH_W) '$(srcdir)/dpfp_threaded.c'; fi`
+
+fxload-ezusb.o: ezusb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -MT fxload-ezusb.o -MD -MP -MF $(DEPDIR)/fxload-ezusb.Tpo -c -o fxload-ezusb.o `test -f 'ezusb.c' || echo '$(srcdir)/'`ezusb.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fxload-ezusb.Tpo $(DEPDIR)/fxload-ezusb.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='ezusb.c' object='fxload-ezusb.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -c -o fxload-ezusb.o `test -f 'ezusb.c' || echo '$(srcdir)/'`ezusb.c
+
+fxload-ezusb.obj: ezusb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -MT fxload-ezusb.obj -MD -MP -MF $(DEPDIR)/fxload-ezusb.Tpo -c -o fxload-ezusb.obj `if test -f 'ezusb.c'; then $(CYGPATH_W) 'ezusb.c'; else $(CYGPATH_W) '$(srcdir)/ezusb.c'; fi`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fxload-ezusb.Tpo $(DEPDIR)/fxload-ezusb.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='ezusb.c' object='fxload-ezusb.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -c -o fxload-ezusb.obj `if test -f 'ezusb.c'; then $(CYGPATH_W) 'ezusb.c'; else $(CYGPATH_W) '$(srcdir)/ezusb.c'; fi`
+
+fxload-fxload.o: fxload.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -MT fxload-fxload.o -MD -MP -MF $(DEPDIR)/fxload-fxload.Tpo -c -o fxload-fxload.o `test -f 'fxload.c' || echo '$(srcdir)/'`fxload.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fxload-fxload.Tpo $(DEPDIR)/fxload-fxload.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fxload.c' object='fxload-fxload.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -c -o fxload-fxload.o `test -f 'fxload.c' || echo '$(srcdir)/'`fxload.c
+
+fxload-fxload.obj: fxload.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -MT fxload-fxload.obj -MD -MP -MF $(DEPDIR)/fxload-fxload.Tpo -c -o fxload-fxload.obj `if test -f 'fxload.c'; then $(CYGPATH_W) 'fxload.c'; else $(CYGPATH_W) '$(srcdir)/fxload.c'; fi`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/fxload-fxload.Tpo $(DEPDIR)/fxload-fxload.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='fxload.c' object='fxload-fxload.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fxload_CFLAGS) $(CFLAGS) -c -o fxload-fxload.obj `if test -f 'fxload.c'; then $(CYGPATH_W) 'fxload.c'; else $(CYGPATH_W) '$(srcdir)/fxload.c'; fi`
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
+ ctags-am distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/*
+ * libusb example program to manipulate U.are.U 4000B fingerprint scanner.
+ * Copyright © 2007 Daniel Drake <dsd@gentoo.org>
+ *
+ * Basic image capture program only, does not consider the powerup quirks or
+ * the fact that image encryption may be enabled. Not expected to work
+ * flawlessly all of the time.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <errno.h>
+#include <signal.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "libusb.h"
+
+#define EP_INTR (1 | LIBUSB_ENDPOINT_IN)
+#define EP_DATA (2 | LIBUSB_ENDPOINT_IN)
+#define CTRL_IN (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN)
+#define CTRL_OUT (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT)
+#define USB_RQ 0x04
+#define INTR_LENGTH 64
+
+enum {
+ MODE_INIT = 0x00,
+ MODE_AWAIT_FINGER_ON = 0x10,
+ MODE_AWAIT_FINGER_OFF = 0x12,
+ MODE_CAPTURE = 0x20,
+ MODE_SHUT_UP = 0x30,
+ MODE_READY = 0x80,
+};
+
+static int next_state(void);
+
+enum {
+ STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON = 1,
+ STATE_AWAIT_IRQ_FINGER_DETECTED,
+ STATE_AWAIT_MODE_CHANGE_CAPTURE,
+ STATE_AWAIT_IMAGE,
+ STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF,
+ STATE_AWAIT_IRQ_FINGER_REMOVED,
+};
+
+static int state = 0;
+static struct libusb_device_handle *devh = NULL;
+static unsigned char imgbuf[0x1b340];
+static unsigned char irqbuf[INTR_LENGTH];
+static struct libusb_transfer *img_transfer = NULL;
+static struct libusb_transfer *irq_transfer = NULL;
+static int img_idx = 0;
+static int do_exit = 0;
+
+static int find_dpfp_device(void)
+{
+ devh = libusb_open_device_with_vid_pid(NULL, 0x05ba, 0x000a);
+ return devh ? 0 : -EIO;
+}
+
+static int print_f0_data(void)
+{
+ unsigned char data[0x10];
+ int r;
+ unsigned int i;
+
+ r = libusb_control_transfer(devh, CTRL_IN, USB_RQ, 0xf0, 0, data,
+ sizeof(data), 0);
+ if (r < 0) {
+ fprintf(stderr, "F0 error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < sizeof(data)) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("F0 data:");
+ for (i = 0; i < sizeof(data); i++)
+ printf("%02x ", data[i]);
+ printf("\n");
+ return 0;
+}
+
+static int get_hwstat(unsigned char *status)
+{
+ int r;
+
+ r = libusb_control_transfer(devh, CTRL_IN, USB_RQ, 0x07, 0, status, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "read hwstat error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("hwstat reads %02x\n", *status);
+ return 0;
+}
+
+static int set_hwstat(unsigned char data)
+{
+ int r;
+
+ printf("set hwstat to %02x\n", data);
+ r = libusb_control_transfer(devh, CTRL_OUT, USB_RQ, 0x07, 0, &data, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "set hwstat error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short write (%d)", r);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int set_mode(unsigned char data)
+{
+ int r;
+ printf("set mode %02x\n", data);
+
+ r = libusb_control_transfer(devh, CTRL_OUT, USB_RQ, 0x4e, 0, &data, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "set mode error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short write (%d)", r);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void LIBUSB_CALL cb_mode_changed(struct libusb_transfer *transfer)
+{
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "mode change transfer not completed!\n");
+ do_exit = 2;
+ }
+
+ printf("async cb_mode_changed length=%d actual_length=%d\n",
+ transfer->length, transfer->actual_length);
+ if (next_state() < 0)
+ do_exit = 2;
+}
+
+static int set_mode_async(unsigned char data)
+{
+ unsigned char *buf = (unsigned char*) malloc(LIBUSB_CONTROL_SETUP_SIZE + 1);
+ struct libusb_transfer *transfer;
+
+ if (!buf)
+ return -ENOMEM;
+
+ transfer = libusb_alloc_transfer(0);
+ if (!transfer) {
+ free(buf);
+ return -ENOMEM;
+ }
+
+ printf("async set mode %02x\n", data);
+ libusb_fill_control_setup(buf, CTRL_OUT, USB_RQ, 0x4e, 0, 1);
+ buf[LIBUSB_CONTROL_SETUP_SIZE] = data;
+ libusb_fill_control_transfer(transfer, devh, buf, cb_mode_changed, NULL,
+ 1000);
+
+ transfer->flags = LIBUSB_TRANSFER_SHORT_NOT_OK
+ | LIBUSB_TRANSFER_FREE_BUFFER | LIBUSB_TRANSFER_FREE_TRANSFER;
+ return libusb_submit_transfer(transfer);
+}
+
+static int do_sync_intr(unsigned char *data)
+{
+ int r;
+ int transferred;
+
+ r = libusb_interrupt_transfer(devh, EP_INTR, data, INTR_LENGTH,
+ &transferred, 1000);
+ if (r < 0) {
+ fprintf(stderr, "intr error %d\n", r);
+ return r;
+ }
+ if (transferred < INTR_LENGTH) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("recv interrupt %04x\n", *((uint16_t *) data));
+ return 0;
+}
+
+static int sync_intr(unsigned char type)
+{
+ int r;
+ unsigned char data[INTR_LENGTH];
+
+ while (1) {
+ r = do_sync_intr(data);
+ if (r < 0)
+ return r;
+ if (data[0] == type)
+ return 0;
+ }
+}
+
+static int save_to_file(unsigned char *data)
+{
+ FILE *fd;
+ char filename[64];
+
+ snprintf(filename, sizeof(filename), "finger%d.pgm", img_idx++);
+ fd = fopen(filename, "w");
+ if (!fd)
+ return -1;
+
+ fputs("P5 384 289 255 ", fd);
+ (void) fwrite(data + 64, 1, 384*289, fd);
+ fclose(fd);
+ printf("saved image to %s\n", filename);
+ return 0;
+}
+
+static int next_state(void)
+{
+ int r = 0;
+ printf("old state: %d\n", state);
+ switch (state) {
+ case STATE_AWAIT_IRQ_FINGER_REMOVED:
+ state = STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON;
+ r = set_mode_async(MODE_AWAIT_FINGER_ON);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON:
+ state = STATE_AWAIT_IRQ_FINGER_DETECTED;
+ break;
+ case STATE_AWAIT_IRQ_FINGER_DETECTED:
+ state = STATE_AWAIT_MODE_CHANGE_CAPTURE;
+ r = set_mode_async(MODE_CAPTURE);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_CAPTURE:
+ state = STATE_AWAIT_IMAGE;
+ break;
+ case STATE_AWAIT_IMAGE:
+ state = STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF;
+ r = set_mode_async(MODE_AWAIT_FINGER_OFF);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF:
+ state = STATE_AWAIT_IRQ_FINGER_REMOVED;
+ break;
+ default:
+ printf("unrecognised state %d\n", state);
+ }
+ if (r < 0) {
+ fprintf(stderr, "error detected changing state\n");
+ return r;
+ }
+
+ printf("new state: %d\n", state);
+ return 0;
+}
+
+static void LIBUSB_CALL cb_irq(struct libusb_transfer *transfer)
+{
+ unsigned char irqtype = transfer->buffer[0];
+
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "irq transfer status %d?\n", transfer->status);
+ do_exit = 2;
+ libusb_free_transfer(transfer);
+ irq_transfer = NULL;
+ return;
+ }
+
+ printf("IRQ callback %02x\n", irqtype);
+ switch (state) {
+ case STATE_AWAIT_IRQ_FINGER_DETECTED:
+ if (irqtype == 0x01) {
+ if (next_state() < 0) {
+ do_exit = 2;
+ return;
+ }
+ } else {
+ printf("finger-on-sensor detected in wrong state!\n");
+ }
+ break;
+ case STATE_AWAIT_IRQ_FINGER_REMOVED:
+ if (irqtype == 0x02) {
+ if (next_state() < 0) {
+ do_exit = 2;
+ return;
+ }
+ } else {
+ printf("finger-on-sensor detected in wrong state!\n");
+ }
+ break;
+ }
+ if (libusb_submit_transfer(irq_transfer) < 0)
+ do_exit = 2;
+}
+
+static void LIBUSB_CALL cb_img(struct libusb_transfer *transfer)
+{
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "img transfer status %d?\n", transfer->status);
+ do_exit = 2;
+ libusb_free_transfer(transfer);
+ img_transfer = NULL;
+ return;
+ }
+
+ printf("Image callback\n");
+ save_to_file(imgbuf);
+ if (next_state() < 0) {
+ do_exit = 2;
+ return;
+ }
+ if (libusb_submit_transfer(img_transfer) < 0)
+ do_exit = 2;
+}
+
+static int init_capture(void)
+{
+ int r;
+
+ r = libusb_submit_transfer(irq_transfer);
+ if (r < 0)
+ return r;
+
+ r = libusb_submit_transfer(img_transfer);
+ if (r < 0) {
+ libusb_cancel_transfer(irq_transfer);
+ while (irq_transfer)
+ if (libusb_handle_events(NULL) < 0)
+ break;
+ return r;
+ }
+
+ /* start state machine */
+ state = STATE_AWAIT_IRQ_FINGER_REMOVED;
+ return next_state();
+}
+
+static int do_init(void)
+{
+ unsigned char status;
+ int r;
+
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+
+ if (!(status & 0x80)) {
+ r = set_hwstat(status | 0x80);
+ if (r < 0)
+ return r;
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+ }
+
+ status &= ~0x80;
+ r = set_hwstat(status);
+ if (r < 0)
+ return r;
+
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+
+ r = sync_intr(0x56);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+static int alloc_transfers(void)
+{
+ img_transfer = libusb_alloc_transfer(0);
+ if (!img_transfer)
+ return -ENOMEM;
+
+ irq_transfer = libusb_alloc_transfer(0);
+ if (!irq_transfer)
+ return -ENOMEM;
+
+ libusb_fill_bulk_transfer(img_transfer, devh, EP_DATA, imgbuf,
+ sizeof(imgbuf), cb_img, NULL, 0);
+ libusb_fill_interrupt_transfer(irq_transfer, devh, EP_INTR, irqbuf,
+ sizeof(irqbuf), cb_irq, NULL, 0);
+
+ return 0;
+}
+
+static void sighandler(int signum)
+{
+ do_exit = 1;
+}
+
+int main(void)
+{
+ struct sigaction sigact;
+ int r = 1;
+
+ r = libusb_init(NULL);
+ if (r < 0) {
+ fprintf(stderr, "failed to initialise libusb\n");
+ exit(1);
+ }
+
+ r = find_dpfp_device();
+ if (r < 0) {
+ fprintf(stderr, "Could not find/open device\n");
+ goto out;
+ }
+
+ r = libusb_claim_interface(devh, 0);
+ if (r < 0) {
+ fprintf(stderr, "usb_claim_interface error %d\n", r);
+ goto out;
+ }
+ printf("claimed interface\n");
+
+ r = print_f0_data();
+ if (r < 0)
+ goto out_release;
+
+ r = do_init();
+ if (r < 0)
+ goto out_deinit;
+
+ /* async from here onwards */
+
+ r = alloc_transfers();
+ if (r < 0)
+ goto out_deinit;
+
+ r = init_capture();
+ if (r < 0)
+ goto out_deinit;
+
+ sigact.sa_handler = sighandler;
+ sigemptyset(&sigact.sa_mask);
+ sigact.sa_flags = 0;
+ sigaction(SIGINT, &sigact, NULL);
+ sigaction(SIGTERM, &sigact, NULL);
+ sigaction(SIGQUIT, &sigact, NULL);
+
+ while (!do_exit) {
+ r = libusb_handle_events(NULL);
+ if (r < 0)
+ goto out_deinit;
+ }
+
+ printf("shutting down...\n");
+
+ if (irq_transfer) {
+ r = libusb_cancel_transfer(irq_transfer);
+ if (r < 0)
+ goto out_deinit;
+ }
+
+ if (img_transfer) {
+ r = libusb_cancel_transfer(img_transfer);
+ if (r < 0)
+ goto out_deinit;
+ }
+
+ while (irq_transfer || img_transfer)
+ if (libusb_handle_events(NULL) < 0)
+ break;
+
+ if (do_exit == 1)
+ r = 0;
+ else
+ r = 1;
+
+out_deinit:
+ libusb_free_transfer(img_transfer);
+ libusb_free_transfer(irq_transfer);
+ set_mode(0);
+ set_hwstat(0x80);
+out_release:
+ libusb_release_interface(devh, 0);
+out:
+ libusb_close(devh);
+ libusb_exit(NULL);
+ return r >= 0 ? r : -r;
+}
--- /dev/null
+/*
+ * libusb example program to manipulate U.are.U 4000B fingerprint scanner.
+ * Copyright © 2007 Daniel Drake <dsd@gentoo.org>
+ *
+ * Basic image capture program only, does not consider the powerup quirks or
+ * the fact that image encryption may be enabled. Not expected to work
+ * flawlessly all of the time.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <errno.h>
+#include <pthread.h>
+#include <semaphore.h>
+#include <signal.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "libusb.h"
+
+#define EP_INTR (1 | LIBUSB_ENDPOINT_IN)
+#define EP_DATA (2 | LIBUSB_ENDPOINT_IN)
+#define CTRL_IN (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN)
+#define CTRL_OUT (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT)
+#define USB_RQ 0x04
+#define INTR_LENGTH 64
+
+enum {
+ MODE_INIT = 0x00,
+ MODE_AWAIT_FINGER_ON = 0x10,
+ MODE_AWAIT_FINGER_OFF = 0x12,
+ MODE_CAPTURE = 0x20,
+ MODE_SHUT_UP = 0x30,
+ MODE_READY = 0x80,
+};
+
+static int next_state(void);
+
+enum {
+ STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON = 1,
+ STATE_AWAIT_IRQ_FINGER_DETECTED,
+ STATE_AWAIT_MODE_CHANGE_CAPTURE,
+ STATE_AWAIT_IMAGE,
+ STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF,
+ STATE_AWAIT_IRQ_FINGER_REMOVED,
+};
+
+static int state = 0;
+static struct libusb_device_handle *devh = NULL;
+static unsigned char imgbuf[0x1b340];
+static unsigned char irqbuf[INTR_LENGTH];
+static struct libusb_transfer *img_transfer = NULL;
+static struct libusb_transfer *irq_transfer = NULL;
+static int img_idx = 0;
+static volatile sig_atomic_t do_exit = 0;
+
+static pthread_t poll_thread;
+static sem_t exit_sem;
+
+static void request_exit(sig_atomic_t code)
+{
+ do_exit = code;
+ sem_post(&exit_sem);
+}
+
+static void *poll_thread_main(void *arg)
+{
+ int r = 0;
+ printf("poll thread running\n");
+
+ while (!do_exit) {
+ struct timeval tv = { 1, 0 };
+ r = libusb_handle_events_timeout(NULL, &tv);
+ if (r < 0) {
+ request_exit(2);
+ break;
+ }
+ }
+
+ printf("poll thread shutting down\n");
+ return NULL;
+}
+
+static int find_dpfp_device(void)
+{
+ devh = libusb_open_device_with_vid_pid(NULL, 0x05ba, 0x000a);
+ return devh ? 0 : -EIO;
+}
+
+static int print_f0_data(void)
+{
+ unsigned char data[0x10];
+ int r;
+ unsigned int i;
+
+ r = libusb_control_transfer(devh, CTRL_IN, USB_RQ, 0xf0, 0, data,
+ sizeof(data), 0);
+ if (r < 0) {
+ fprintf(stderr, "F0 error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < sizeof(data)) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("F0 data:");
+ for (i = 0; i < sizeof(data); i++)
+ printf("%02x ", data[i]);
+ printf("\n");
+ return 0;
+}
+
+static int get_hwstat(unsigned char *status)
+{
+ int r;
+
+ r = libusb_control_transfer(devh, CTRL_IN, USB_RQ, 0x07, 0, status, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "read hwstat error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("hwstat reads %02x\n", *status);
+ return 0;
+}
+
+static int set_hwstat(unsigned char data)
+{
+ int r;
+
+ printf("set hwstat to %02x\n", data);
+ r = libusb_control_transfer(devh, CTRL_OUT, USB_RQ, 0x07, 0, &data, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "set hwstat error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short write (%d)", r);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int set_mode(unsigned char data)
+{
+ int r;
+ printf("set mode %02x\n", data);
+
+ r = libusb_control_transfer(devh, CTRL_OUT, USB_RQ, 0x4e, 0, &data, 1, 0);
+ if (r < 0) {
+ fprintf(stderr, "set mode error %d\n", r);
+ return r;
+ }
+ if ((unsigned int) r < 1) {
+ fprintf(stderr, "short write (%d)", r);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void LIBUSB_CALL cb_mode_changed(struct libusb_transfer *transfer)
+{
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "mode change transfer not completed!\n");
+ request_exit(2);
+ }
+
+ printf("async cb_mode_changed length=%d actual_length=%d\n",
+ transfer->length, transfer->actual_length);
+ if (next_state() < 0)
+ request_exit(2);
+}
+
+static int set_mode_async(unsigned char data)
+{
+ unsigned char *buf = (unsigned char*) malloc(LIBUSB_CONTROL_SETUP_SIZE + 1);
+ struct libusb_transfer *transfer;
+
+ if (!buf)
+ return -ENOMEM;
+
+ transfer = libusb_alloc_transfer(0);
+ if (!transfer) {
+ free(buf);
+ return -ENOMEM;
+ }
+
+ printf("async set mode %02x\n", data);
+ libusb_fill_control_setup(buf, CTRL_OUT, USB_RQ, 0x4e, 0, 1);
+ buf[LIBUSB_CONTROL_SETUP_SIZE] = data;
+ libusb_fill_control_transfer(transfer, devh, buf, cb_mode_changed, NULL,
+ 1000);
+
+ transfer->flags = LIBUSB_TRANSFER_SHORT_NOT_OK
+ | LIBUSB_TRANSFER_FREE_BUFFER | LIBUSB_TRANSFER_FREE_TRANSFER;
+ return libusb_submit_transfer(transfer);
+}
+
+static int do_sync_intr(unsigned char *data)
+{
+ int r;
+ int transferred;
+
+ r = libusb_interrupt_transfer(devh, EP_INTR, data, INTR_LENGTH,
+ &transferred, 1000);
+ if (r < 0) {
+ fprintf(stderr, "intr error %d\n", r);
+ return r;
+ }
+ if (transferred < INTR_LENGTH) {
+ fprintf(stderr, "short read (%d)\n", r);
+ return -1;
+ }
+
+ printf("recv interrupt %04x\n", *((uint16_t *) data));
+ return 0;
+}
+
+static int sync_intr(unsigned char type)
+{
+ int r;
+ unsigned char data[INTR_LENGTH];
+
+ while (1) {
+ r = do_sync_intr(data);
+ if (r < 0)
+ return r;
+ if (data[0] == type)
+ return 0;
+ }
+}
+
+static int save_to_file(unsigned char *data)
+{
+ FILE *fd;
+ char filename[64];
+
+ snprintf(filename, sizeof(filename), "finger%d.pgm", img_idx++);
+ fd = fopen(filename, "w");
+ if (!fd)
+ return -1;
+
+ fputs("P5 384 289 255 ", fd);
+ (void) fwrite(data + 64, 1, 384*289, fd);
+ fclose(fd);
+ printf("saved image to %s\n", filename);
+ return 0;
+}
+
+static int next_state(void)
+{
+ int r = 0;
+ printf("old state: %d\n", state);
+ switch (state) {
+ case STATE_AWAIT_IRQ_FINGER_REMOVED:
+ state = STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON;
+ r = set_mode_async(MODE_AWAIT_FINGER_ON);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_ON:
+ state = STATE_AWAIT_IRQ_FINGER_DETECTED;
+ break;
+ case STATE_AWAIT_IRQ_FINGER_DETECTED:
+ state = STATE_AWAIT_MODE_CHANGE_CAPTURE;
+ r = set_mode_async(MODE_CAPTURE);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_CAPTURE:
+ state = STATE_AWAIT_IMAGE;
+ break;
+ case STATE_AWAIT_IMAGE:
+ state = STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF;
+ r = set_mode_async(MODE_AWAIT_FINGER_OFF);
+ break;
+ case STATE_AWAIT_MODE_CHANGE_AWAIT_FINGER_OFF:
+ state = STATE_AWAIT_IRQ_FINGER_REMOVED;
+ break;
+ default:
+ printf("unrecognised state %d\n", state);
+ }
+ if (r < 0) {
+ fprintf(stderr, "error detected changing state\n");
+ return r;
+ }
+
+ printf("new state: %d\n", state);
+ return 0;
+}
+
+static void LIBUSB_CALL cb_irq(struct libusb_transfer *transfer)
+{
+ unsigned char irqtype = transfer->buffer[0];
+
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "irq transfer status %d?\n", transfer->status);
+ irq_transfer = NULL;
+ request_exit(2);
+ return;
+ }
+
+ printf("IRQ callback %02x\n", irqtype);
+ switch (state) {
+ case STATE_AWAIT_IRQ_FINGER_DETECTED:
+ if (irqtype == 0x01) {
+ if (next_state() < 0) {
+ request_exit(2);
+ return;
+ }
+ } else {
+ printf("finger-on-sensor detected in wrong state!\n");
+ }
+ break;
+ case STATE_AWAIT_IRQ_FINGER_REMOVED:
+ if (irqtype == 0x02) {
+ if (next_state() < 0) {
+ request_exit(2);
+ return;
+ }
+ } else {
+ printf("finger-on-sensor detected in wrong state!\n");
+ }
+ break;
+ }
+ if (libusb_submit_transfer(irq_transfer) < 0)
+ request_exit(2);
+}
+
+static void LIBUSB_CALL cb_img(struct libusb_transfer *transfer)
+{
+ if (transfer->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "img transfer status %d?\n", transfer->status);
+ img_transfer = NULL;
+ request_exit(2);
+ return;
+ }
+
+ printf("Image callback\n");
+ save_to_file(imgbuf);
+ if (next_state() < 0) {
+ request_exit(2);
+ return;
+ }
+ if (libusb_submit_transfer(img_transfer) < 0)
+ request_exit(2);
+}
+
+static int init_capture(void)
+{
+ int r;
+
+ r = libusb_submit_transfer(irq_transfer);
+ if (r < 0)
+ return r;
+
+ r = libusb_submit_transfer(img_transfer);
+ if (r < 0) {
+ libusb_cancel_transfer(irq_transfer);
+ while (irq_transfer)
+ if (libusb_handle_events(NULL) < 0)
+ break;
+ return r;
+ }
+
+ /* start state machine */
+ state = STATE_AWAIT_IRQ_FINGER_REMOVED;
+ return next_state();
+}
+
+static int do_init(void)
+{
+ unsigned char status;
+ int r;
+
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+
+ if (!(status & 0x80)) {
+ r = set_hwstat(status | 0x80);
+ if (r < 0)
+ return r;
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+ }
+
+ status &= ~0x80;
+ r = set_hwstat(status);
+ if (r < 0)
+ return r;
+
+ r = get_hwstat(&status);
+ if (r < 0)
+ return r;
+
+ r = sync_intr(0x56);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+static int alloc_transfers(void)
+{
+ img_transfer = libusb_alloc_transfer(0);
+ if (!img_transfer)
+ return -ENOMEM;
+
+ irq_transfer = libusb_alloc_transfer(0);
+ if (!irq_transfer)
+ return -ENOMEM;
+
+ libusb_fill_bulk_transfer(img_transfer, devh, EP_DATA, imgbuf,
+ sizeof(imgbuf), cb_img, NULL, 0);
+ libusb_fill_interrupt_transfer(irq_transfer, devh, EP_INTR, irqbuf,
+ sizeof(irqbuf), cb_irq, NULL, 0);
+
+ return 0;
+}
+
+static void sighandler(int signum)
+{
+ request_exit(1);
+}
+
+int main(void)
+{
+ struct sigaction sigact;
+ int r = 1;
+
+ r = sem_init(&exit_sem, 0, 0);
+ if (r) {
+ fprintf(stderr, "failed to initialise semaphore error %d", errno);
+ exit(1);
+ }
+
+ r = libusb_init(NULL);
+ if (r < 0) {
+ fprintf(stderr, "failed to initialise libusb\n");
+ sem_destroy(&exit_sem);
+ exit(1);
+ }
+
+ r = find_dpfp_device();
+ if (r < 0) {
+ fprintf(stderr, "Could not find/open device\n");
+ goto out;
+ }
+
+ r = libusb_claim_interface(devh, 0);
+ if (r < 0) {
+ fprintf(stderr, "usb_claim_interface error %d %s\n", r, strerror(-r));
+ goto out;
+ }
+ printf("claimed interface\n");
+
+ r = print_f0_data();
+ if (r < 0)
+ goto out_release;
+
+ r = do_init();
+ if (r < 0)
+ goto out_deinit;
+
+ /* async from here onwards */
+
+ sigact.sa_handler = sighandler;
+ sigemptyset(&sigact.sa_mask);
+ sigact.sa_flags = 0;
+ sigaction(SIGINT, &sigact, NULL);
+ sigaction(SIGTERM, &sigact, NULL);
+ sigaction(SIGQUIT, &sigact, NULL);
+
+ r = pthread_create(&poll_thread, NULL, poll_thread_main, NULL);
+ if (r)
+ goto out_deinit;
+
+ r = alloc_transfers();
+ if (r < 0) {
+ request_exit(1);
+ pthread_join(poll_thread, NULL);
+ goto out_deinit;
+ }
+
+ r = init_capture();
+ if (r < 0) {
+ request_exit(1);
+ pthread_join(poll_thread, NULL);
+ goto out_deinit;
+ }
+
+ while (!do_exit)
+ sem_wait(&exit_sem);
+
+ printf("shutting down...\n");
+ pthread_join(poll_thread, NULL);
+
+ r = libusb_cancel_transfer(irq_transfer);
+ if (r < 0) {
+ request_exit(1);
+ goto out_deinit;
+ }
+
+ r = libusb_cancel_transfer(img_transfer);
+ if (r < 0) {
+ request_exit(1);
+ goto out_deinit;
+ }
+
+ while (img_transfer || irq_transfer)
+ if (libusb_handle_events(NULL) < 0)
+ break;
+
+ if (do_exit == 1)
+ r = 0;
+ else
+ r = 1;
+
+out_deinit:
+ libusb_free_transfer(img_transfer);
+ libusb_free_transfer(irq_transfer);
+ set_mode(0);
+ set_hwstat(0x80);
+out_release:
+ libusb_release_interface(devh, 0);
+out:
+ libusb_close(devh);
+ libusb_exit(NULL);
+ sem_destroy(&exit_sem);
+ return r >= 0 ? r : -r;
+}
--- /dev/null
+/*
+ * Copyright © 2001 Stephen Williams (steve@icarus.com)
+ * Copyright © 2001-2002 David Brownell (dbrownell@users.sourceforge.net)
+ * Copyright © 2008 Roger Williams (rawqux@users.sourceforge.net)
+ * Copyright © 2012 Pete Batard (pete@akeo.ie)
+ * Copyright © 2013 Federico Manzan (f.manzan@gmail.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+
+#include "libusb.h"
+#include "ezusb.h"
+
+extern void logerror(const char *format, ...)
+ __attribute__ ((format(printf, 1, 2)));
+
+/*
+ * This file contains functions for uploading firmware into Cypress
+ * EZ-USB microcontrollers. These chips use control endpoint 0 and vendor
+ * specific commands to support writing into the on-chip SRAM. They also
+ * support writing into the CPUCS register, which is how we reset the
+ * processor after loading firmware (including the reset vector).
+ *
+ * These Cypress devices are 8-bit 8051 based microcontrollers with
+ * special support for USB I/O. They come in several packages, and
+ * some can be set up with external memory when device costs allow.
+ * Note that the design was originally by AnchorChips, so you may find
+ * references to that vendor (which was later merged into Cypress).
+ * The Cypress FX parts are largely compatible with the Anchorhip ones.
+ */
+
+int verbose = 1;
+
+/*
+ * return true if [addr,addr+len] includes external RAM
+ * for Anchorchips EZ-USB or Cypress EZ-USB FX
+ */
+static bool fx_is_external(uint32_t addr, size_t len)
+{
+ /* with 8KB RAM, 0x0000-0x1b3f can be written
+ * we can't tell if it's a 4KB device here
+ */
+ if (addr <= 0x1b3f)
+ return ((addr + len) > 0x1b40);
+
+ /* there may be more RAM; unclear if we can write it.
+ * some bulk buffers may be unused, 0x1b3f-0x1f3f
+ * firmware can set ISODISAB for 2KB at 0x2000-0x27ff
+ */
+ return true;
+}
+
+/*
+ * return true if [addr,addr+len] includes external RAM
+ * for Cypress EZ-USB FX2
+ */
+static bool fx2_is_external(uint32_t addr, size_t len)
+{
+ /* 1st 8KB for data/code, 0x0000-0x1fff */
+ if (addr <= 0x1fff)
+ return ((addr + len) > 0x2000);
+
+ /* and 512 for data, 0xe000-0xe1ff */
+ else if (addr >= 0xe000 && addr <= 0xe1ff)
+ return ((addr + len) > 0xe200);
+
+ /* otherwise, it's certainly external */
+ else
+ return true;
+}
+
+/*
+ * return true if [addr,addr+len] includes external RAM
+ * for Cypress EZ-USB FX2LP
+ */
+static bool fx2lp_is_external(uint32_t addr, size_t len)
+{
+ /* 1st 16KB for data/code, 0x0000-0x3fff */
+ if (addr <= 0x3fff)
+ return ((addr + len) > 0x4000);
+
+ /* and 512 for data, 0xe000-0xe1ff */
+ else if (addr >= 0xe000 && addr <= 0xe1ff)
+ return ((addr + len) > 0xe200);
+
+ /* otherwise, it's certainly external */
+ else
+ return true;
+}
+
+
+/*****************************************************************************/
+
+/*
+ * These are the requests (bRequest) that the bootstrap loader is expected
+ * to recognize. The codes are reserved by Cypress, and these values match
+ * what EZ-USB hardware, or "Vend_Ax" firmware (2nd stage loader) uses.
+ * Cypress' "a3load" is nice because it supports both FX and FX2, although
+ * it doesn't have the EEPROM support (subset of "Vend_Ax").
+ */
+#define RW_INTERNAL 0xA0 /* hardware implements this one */
+#define RW_MEMORY 0xA3
+
+/*
+ * Issues the specified vendor-specific write request.
+ */
+static int ezusb_write(libusb_device_handle *device, const char *label,
+ uint8_t opcode, uint32_t addr, const unsigned char *data, size_t len)
+{
+ int status;
+
+ if (verbose > 1)
+ logerror("%s, addr 0x%08x len %4u (0x%04x)\n", label, addr, (unsigned)len, (unsigned)len);
+ status = libusb_control_transfer(device,
+ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
+ opcode, addr & 0xFFFF, addr >> 16,
+ (unsigned char*)data, (uint16_t)len, 1000);
+ if (status != len) {
+ if (status < 0)
+ logerror("%s: %s\n", label, libusb_error_name(status));
+ else
+ logerror("%s ==> %d\n", label, status);
+ }
+ return (status < 0) ? -EIO : 0;
+}
+
+/*
+ * Issues the specified vendor-specific read request.
+ */
+static int ezusb_read(libusb_device_handle *device, const char *label,
+ uint8_t opcode, uint32_t addr, const unsigned char *data, size_t len)
+{
+ int status;
+
+ if (verbose > 1)
+ logerror("%s, addr 0x%08x len %4u (0x%04x)\n", label, addr, (unsigned)len, (unsigned)len);
+ status = libusb_control_transfer(device,
+ LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
+ opcode, addr & 0xFFFF, addr >> 16,
+ (unsigned char*)data, (uint16_t)len, 1000);
+ if (status != len) {
+ if (status < 0)
+ logerror("%s: %s\n", label, libusb_error_name(status));
+ else
+ logerror("%s ==> %d\n", label, status);
+ }
+ return (status < 0) ? -EIO : 0;
+}
+
+/*
+ * Modifies the CPUCS register to stop or reset the CPU.
+ * Returns false on error.
+ */
+static bool ezusb_cpucs(libusb_device_handle *device, uint32_t addr, bool doRun)
+{
+ int status;
+ uint8_t data = doRun ? 0x00 : 0x01;
+
+ if (verbose)
+ logerror("%s\n", data ? "stop CPU" : "reset CPU");
+ status = libusb_control_transfer(device,
+ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
+ RW_INTERNAL, addr & 0xFFFF, addr >> 16,
+ &data, 1, 1000);
+ if ((status != 1) &&
+ /* We may get an I/O error from libusb as the device disappears */
+ ((!doRun) || (status != LIBUSB_ERROR_IO)))
+ {
+ const char *mesg = "can't modify CPUCS";
+ if (status < 0)
+ logerror("%s: %s\n", mesg, libusb_error_name(status));
+ else
+ logerror("%s\n", mesg);
+ return false;
+ } else
+ return true;
+}
+
+/*
+ * Send an FX3 jumpt to address command
+ * Returns false on error.
+ */
+static bool ezusb_fx3_jump(libusb_device_handle *device, uint32_t addr)
+{
+ int status;
+
+ if (verbose)
+ logerror("transfer execution to Program Entry at 0x%08x\n", addr);
+ status = libusb_control_transfer(device,
+ LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE,
+ RW_INTERNAL, addr & 0xFFFF, addr >> 16,
+ NULL, 0, 1000);
+ /* We may get an I/O error from libusb as the device disappears */
+ if ((status != 0) && (status != LIBUSB_ERROR_IO))
+ {
+ const char *mesg = "failed to send jump command";
+ if (status < 0)
+ logerror("%s: %s\n", mesg, libusb_error_name(status));
+ else
+ logerror("%s\n", mesg);
+ return false;
+ } else
+ return true;
+}
+
+/*****************************************************************************/
+
+/*
+ * Parse an Intel HEX image file and invoke the poke() function on the
+ * various segments to implement policies such as writing to RAM (with
+ * a one or two stage loader setup, depending on the firmware) or to
+ * EEPROM (two stages required).
+ *
+ * image - the hex image file
+ * context - for use by poke()
+ * is_external - if non-null, used to check which segments go into
+ * external memory (writable only by software loader)
+ * poke - called with each memory segment; errors indicated
+ * by returning negative values.
+ *
+ * Caller is responsible for halting CPU as needed, such as when
+ * overwriting a second stage loader.
+ */
+static int parse_ihex(FILE *image, void *context,
+ bool (*is_external)(uint32_t addr, size_t len),
+ int (*poke) (void *context, uint32_t addr, bool external,
+ const unsigned char *data, size_t len))
+{
+ unsigned char data[1023];
+ uint32_t data_addr = 0;
+ size_t data_len = 0;
+ int rc;
+ int first_line = 1;
+ bool external = false;
+
+ /* Read the input file as an IHEX file, and report the memory segments
+ * as we go. Each line holds a max of 16 bytes, but uploading is
+ * faster (and EEPROM space smaller) if we merge those lines into larger
+ * chunks. Most hex files keep memory segments together, which makes
+ * such merging all but free. (But it may still be worth sorting the
+ * hex files to make up for undesirable behavior from tools.)
+ *
+ * Note that EEPROM segments max out at 1023 bytes; the upload protocol
+ * allows segments of up to 64 KBytes (more than a loader could handle).
+ */
+ for (;;) {
+ char buf[512], *cp;
+ char tmp, type;
+ size_t len;
+ unsigned idx, off;
+
+ cp = fgets(buf, sizeof(buf), image);
+ if (cp == NULL) {
+ logerror("EOF without EOF record!\n");
+ break;
+ }
+
+ /* EXTENSION: "# comment-till-end-of-line", for copyrights etc */
+ if (buf[0] == '#')
+ continue;
+
+ if (buf[0] != ':') {
+ logerror("not an ihex record: %s", buf);
+ return -2;
+ }
+
+ /* ignore any newline */
+ cp = strchr(buf, '\n');
+ if (cp)
+ *cp = 0;
+
+ if (verbose >= 3)
+ logerror("** LINE: %s\n", buf);
+
+ /* Read the length field (up to 16 bytes) */
+ tmp = buf[3];
+ buf[3] = 0;
+ len = strtoul(buf+1, NULL, 16);
+ buf[3] = tmp;
+
+ /* Read the target offset (address up to 64KB) */
+ tmp = buf[7];
+ buf[7] = 0;
+ off = (int)strtoul(buf+3, NULL, 16);
+ buf[7] = tmp;
+
+ /* Initialize data_addr */
+ if (first_line) {
+ data_addr = off;
+ first_line = 0;
+ }
+
+ /* Read the record type */
+ tmp = buf[9];
+ buf[9] = 0;
+ type = (char)strtoul(buf+7, NULL, 16);
+ buf[9] = tmp;
+
+ /* If this is an EOF record, then make it so. */
+ if (type == 1) {
+ if (verbose >= 2)
+ logerror("EOF on hexfile\n");
+ break;
+ }
+
+ if (type != 0) {
+ logerror("unsupported record type: %u\n", type);
+ return -3;
+ }
+
+ if ((len * 2) + 11 > strlen(buf)) {
+ logerror("record too short?\n");
+ return -4;
+ }
+
+ /* FIXME check for _physically_ contiguous not just virtually
+ * e.g. on FX2 0x1f00-0x2100 includes both on-chip and external
+ * memory so it's not really contiguous */
+
+ /* flush the saved data if it's not contiguous,
+ * or when we've buffered as much as we can.
+ */
+ if (data_len != 0
+ && (off != (data_addr + data_len)
+ /* || !merge */
+ || (data_len + len) > sizeof(data))) {
+ if (is_external)
+ external = is_external(data_addr, data_len);
+ rc = poke(context, data_addr, external, data, data_len);
+ if (rc < 0)
+ return -1;
+ data_addr = off;
+ data_len = 0;
+ }
+
+ /* append to saved data, flush later */
+ for (idx = 0, cp = buf+9 ; idx < len ; idx += 1, cp += 2) {
+ tmp = cp[2];
+ cp[2] = 0;
+ data[data_len + idx] = (uint8_t)strtoul(cp, NULL, 16);
+ cp[2] = tmp;
+ }
+ data_len += len;
+ }
+
+
+ /* flush any data remaining */
+ if (data_len != 0) {
+ if (is_external)
+ external = is_external(data_addr, data_len);
+ rc = poke(context, data_addr, external, data, data_len);
+ if (rc < 0)
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Parse a binary image file and write it as is to the target.
+ * Applies to Cypress BIX images for RAM or Cypress IIC images
+ * for EEPROM.
+ *
+ * image - the BIX image file
+ * context - for use by poke()
+ * is_external - if non-null, used to check which segments go into
+ * external memory (writable only by software loader)
+ * poke - called with each memory segment; errors indicated
+ * by returning negative values.
+ *
+ * Caller is responsible for halting CPU as needed, such as when
+ * overwriting a second stage loader.
+ */
+static int parse_bin(FILE *image, void *context,
+ bool (*is_external)(uint32_t addr, size_t len), int (*poke)(void *context,
+ uint32_t addr, bool external, const unsigned char *data, size_t len))
+{
+ unsigned char data[4096];
+ uint32_t data_addr = 0;
+ size_t data_len = 0;
+ int rc;
+ bool external = false;
+
+ for (;;) {
+ data_len = fread(data, 1, 4096, image);
+ if (data_len == 0)
+ break;
+ if (is_external)
+ external = is_external(data_addr, data_len);
+ rc = poke(context, data_addr, external, data, data_len);
+ if (rc < 0)
+ return -1;
+ data_addr += (uint32_t)data_len;
+ }
+ return feof(image)?0:-1;
+}
+
+/*
+ * Parse a Cypress IIC image file and invoke the poke() function on the
+ * various segments for writing to RAM
+ *
+ * image - the IIC image file
+ * context - for use by poke()
+ * is_external - if non-null, used to check which segments go into
+ * external memory (writable only by software loader)
+ * poke - called with each memory segment; errors indicated
+ * by returning negative values.
+ *
+ * Caller is responsible for halting CPU as needed, such as when
+ * overwriting a second stage loader.
+ */
+static int parse_iic(FILE *image, void *context,
+ bool (*is_external)(uint32_t addr, size_t len),
+ int (*poke)(void *context, uint32_t addr, bool external, const unsigned char *data, size_t len))
+{
+ unsigned char data[4096];
+ uint32_t data_addr = 0;
+ size_t data_len = 0, read_len;
+ uint8_t block_header[4];
+ int rc;
+ bool external = false;
+ long file_size, initial_pos;
+
+ initial_pos = ftell(image);
+ if (initial_pos < 0)
+ return -1;
+
+ if (fseek(image, 0L, SEEK_END) != 0)
+ return -1;
+ file_size = ftell(image);
+ if (fseek(image, initial_pos, SEEK_SET) != 0)
+ return -1;
+ for (;;) {
+ /* Ignore the trailing reset IIC data (5 bytes) */
+ if (ftell(image) >= (file_size - 5))
+ break;
+ if (fread(&block_header, 1, sizeof(block_header), image) != 4) {
+ logerror("unable to read IIC block header\n");
+ return -1;
+ }
+ data_len = (block_header[0] << 8) + block_header[1];
+ data_addr = (block_header[2] << 8) + block_header[3];
+ if (data_len > sizeof(data)) {
+ /* If this is ever reported as an error, switch to using malloc/realloc */
+ logerror("IIC data block too small - please report this error to libusb.info\n");
+ return -1;
+ }
+ read_len = fread(data, 1, data_len, image);
+ if (read_len != data_len) {
+ logerror("read error\n");
+ return -1;
+ }
+ if (is_external)
+ external = is_external(data_addr, data_len);
+ rc = poke(context, data_addr, external, data, data_len);
+ if (rc < 0)
+ return -1;
+ }
+ return 0;
+}
+
+/* the parse call will be selected according to the image type */
+static int (*parse[IMG_TYPE_MAX])(FILE *image, void *context, bool (*is_external)(uint32_t addr, size_t len),
+ int (*poke)(void *context, uint32_t addr, bool external, const unsigned char *data, size_t len))
+ = { parse_ihex, parse_iic, parse_bin };
+
+/*****************************************************************************/
+
+/*
+ * For writing to RAM using a first (hardware) or second (software)
+ * stage loader and 0xA0 or 0xA3 vendor requests
+ */
+typedef enum {
+ _undef = 0,
+ internal_only, /* hardware first-stage loader */
+ skip_internal, /* first phase, second-stage loader */
+ skip_external /* second phase, second-stage loader */
+} ram_mode;
+
+struct ram_poke_context {
+ libusb_device_handle *device;
+ ram_mode mode;
+ size_t total, count;
+};
+
+#define RETRY_LIMIT 5
+
+static int ram_poke(void *context, uint32_t addr, bool external,
+ const unsigned char *data, size_t len)
+{
+ struct ram_poke_context *ctx = (struct ram_poke_context*)context;
+ int rc;
+ unsigned retry = 0;
+
+ switch (ctx->mode) {
+ case internal_only: /* CPU should be stopped */
+ if (external) {
+ logerror("can't write %u bytes external memory at 0x%08x\n",
+ (unsigned)len, addr);
+ return -EINVAL;
+ }
+ break;
+ case skip_internal: /* CPU must be running */
+ if (!external) {
+ if (verbose >= 2) {
+ logerror("SKIP on-chip RAM, %u bytes at 0x%08x\n",
+ (unsigned)len, addr);
+ }
+ return 0;
+ }
+ break;
+ case skip_external: /* CPU should be stopped */
+ if (external) {
+ if (verbose >= 2) {
+ logerror("SKIP external RAM, %u bytes at 0x%08x\n",
+ (unsigned)len, addr);
+ }
+ return 0;
+ }
+ break;
+ case _undef:
+ default:
+ logerror("bug\n");
+ return -EDOM;
+ }
+
+ ctx->total += len;
+ ctx->count++;
+
+ /* Retry this till we get a real error. Control messages are not
+ * NAKed (just dropped) so time out means is a real problem.
+ */
+ while ((rc = ezusb_write(ctx->device,
+ external ? "write external" : "write on-chip",
+ external ? RW_MEMORY : RW_INTERNAL,
+ addr, data, len)) < 0
+ && retry < RETRY_LIMIT) {
+ if (rc != LIBUSB_ERROR_TIMEOUT)
+ break;
+ retry += 1;
+ }
+ return rc;
+}
+
+/*
+ * Load a Cypress Image file into target RAM.
+ * See http://www.cypress.com/?docID=41351 (AN76405 PDF) for more info.
+ */
+static int fx3_load_ram(libusb_device_handle *device, const char *path)
+{
+ uint32_t dCheckSum, dExpectedCheckSum, dAddress, i, dLen, dLength;
+ uint32_t* dImageBuf;
+ unsigned char *bBuf, hBuf[4], blBuf[4], rBuf[4096];
+ FILE *image;
+ int ret = 0;
+
+ image = fopen(path, "rb");
+ if (image == NULL) {
+ logerror("unable to open '%s' for input\n", path);
+ return -2;
+ } else if (verbose)
+ logerror("open firmware image %s for RAM upload\n", path);
+
+ // Read header
+ if (fread(hBuf, sizeof(char), sizeof(hBuf), image) != sizeof(hBuf)) {
+ logerror("could not read image header");
+ ret = -3;
+ goto exit;
+ }
+
+ // check "CY" signature byte and format
+ if ((hBuf[0] != 'C') || (hBuf[1] != 'Y')) {
+ logerror("image doesn't have a CYpress signature\n");
+ ret = -3;
+ goto exit;
+ }
+
+ // Check bImageType
+ switch(hBuf[3]) {
+ case 0xB0:
+ if (verbose)
+ logerror("normal FW binary %s image with checksum\n", (hBuf[2]&0x01)?"data":"executable");
+ break;
+ case 0xB1:
+ logerror("security binary image is not currently supported\n");
+ ret = -3;
+ goto exit;
+ case 0xB2:
+ logerror("VID:PID image is not currently supported\n");
+ ret = -3;
+ goto exit;
+ default:
+ logerror("invalid image type 0x%02X\n", hBuf[3]);
+ ret = -3;
+ goto exit;
+ }
+
+ // Read the bootloader version
+ if (verbose) {
+ if ((ezusb_read(device, "read bootloader version", RW_INTERNAL, 0xFFFF0020, blBuf, 4) < 0)) {
+ logerror("Could not read bootloader version\n");
+ ret = -8;
+ goto exit;
+ }
+ logerror("FX3 bootloader version: 0x%02X%02X%02X%02X\n", blBuf[3], blBuf[2], blBuf[1], blBuf[0]);
+ }
+
+ dCheckSum = 0;
+ if (verbose)
+ logerror("writing image...\n");
+ while (1) {
+ if ((fread(&dLength, sizeof(uint32_t), 1, image) != 1) || // read dLength
+ (fread(&dAddress, sizeof(uint32_t), 1, image) != 1)) { // read dAddress
+ logerror("could not read image");
+ ret = -3;
+ goto exit;
+ }
+ if (dLength == 0)
+ break; // done
+
+ // coverity[tainted_data]
+ dImageBuf = (uint32_t*)calloc(dLength, sizeof(uint32_t));
+ if (dImageBuf == NULL) {
+ logerror("could not allocate buffer for image chunk\n");
+ ret = -4;
+ goto exit;
+ }
+
+ // read sections
+ if (fread(dImageBuf, sizeof(uint32_t), dLength, image) != dLength) {
+ logerror("could not read image");
+ free(dImageBuf);
+ ret = -3;
+ goto exit;
+ }
+ for (i = 0; i < dLength; i++)
+ dCheckSum += dImageBuf[i];
+ dLength <<= 2; // convert to Byte length
+ bBuf = (unsigned char*) dImageBuf;
+
+ while (dLength > 0) {
+ dLen = 4096; // 4K max
+ if (dLen > dLength)
+ dLen = dLength;
+ if ((ezusb_write(device, "write firmware", RW_INTERNAL, dAddress, bBuf, dLen) < 0) ||
+ (ezusb_read(device, "read firmware", RW_INTERNAL, dAddress, rBuf, dLen) < 0)) {
+ logerror("R/W error\n");
+ free(dImageBuf);
+ ret = -5;
+ goto exit;
+ }
+ // Verify data: rBuf with bBuf
+ for (i = 0; i < dLen; i++) {
+ if (rBuf[i] != bBuf[i]) {
+ logerror("verify error");
+ free(dImageBuf);
+ ret = -6;
+ goto exit;
+ }
+ }
+
+ dLength -= dLen;
+ bBuf += dLen;
+ dAddress += dLen;
+ }
+ free(dImageBuf);
+ }
+
+ // read pre-computed checksum data
+ if ((fread(&dExpectedCheckSum, sizeof(uint32_t), 1, image) != 1) ||
+ (dCheckSum != dExpectedCheckSum)) {
+ logerror("checksum error\n");
+ ret = -7;
+ goto exit;
+ }
+
+ // transfer execution to Program Entry
+ if (!ezusb_fx3_jump(device, dAddress)) {
+ ret = -6;
+ }
+
+exit:
+ fclose(image);
+ return ret;
+}
+
+/*
+ * Load a firmware file into target RAM. device is the open libusb
+ * device, and the path is the name of the source file. Open the file,
+ * parse the bytes, and write them in one or two phases.
+ *
+ * If stage == 0, this uses the first stage loader, built into EZ-USB
+ * hardware but limited to writing on-chip memory or CPUCS. Everything
+ * is written during one stage, unless there's an error such as the image
+ * holding data that needs to be written to external memory.
+ *
+ * Otherwise, things are written in two stages. First the external
+ * memory is written, expecting a second stage loader to have already
+ * been loaded. Then file is re-parsed and on-chip memory is written.
+ */
+int ezusb_load_ram(libusb_device_handle *device, const char *path, int fx_type, int img_type, int stage)
+{
+ FILE *image;
+ uint32_t cpucs_addr;
+ bool (*is_external)(uint32_t off, size_t len);
+ struct ram_poke_context ctx;
+ int status;
+ uint8_t iic_header[8] = { 0 };
+ int ret = 0;
+
+ if (fx_type == FX_TYPE_FX3)
+ return fx3_load_ram(device, path);
+
+ image = fopen(path, "rb");
+ if (image == NULL) {
+ logerror("%s: unable to open for input.\n", path);
+ return -2;
+ } else if (verbose > 1)
+ logerror("open firmware image %s for RAM upload\n", path);
+
+ if (img_type == IMG_TYPE_IIC) {
+ if ( (fread(iic_header, 1, sizeof(iic_header), image) != sizeof(iic_header))
+ || (((fx_type == FX_TYPE_FX2LP) || (fx_type == FX_TYPE_FX2)) && (iic_header[0] != 0xC2))
+ || ((fx_type == FX_TYPE_AN21) && (iic_header[0] != 0xB2))
+ || ((fx_type == FX_TYPE_FX1) && (iic_header[0] != 0xB6)) ) {
+ logerror("IIC image does not contain executable code - cannot load to RAM.\n");
+ ret = -1;
+ goto exit;
+ }
+ }
+
+ /* EZ-USB original/FX and FX2 devices differ, apart from the 8051 core */
+ switch(fx_type) {
+ case FX_TYPE_FX2LP:
+ cpucs_addr = 0xe600;
+ is_external = fx2lp_is_external;
+ break;
+ case FX_TYPE_FX2:
+ cpucs_addr = 0xe600;
+ is_external = fx2_is_external;
+ break;
+ default:
+ cpucs_addr = 0x7f92;
+ is_external = fx_is_external;
+ break;
+ }
+
+ /* use only first stage loader? */
+ if (stage == 0) {
+ ctx.mode = internal_only;
+
+ /* if required, halt the CPU while we overwrite its code/data */
+ if (cpucs_addr && !ezusb_cpucs(device, cpucs_addr, false))
+ {
+ ret = -1;
+ goto exit;
+ }
+
+ /* 2nd stage, first part? loader was already uploaded */
+ } else {
+ ctx.mode = skip_internal;
+
+ /* let CPU run; overwrite the 2nd stage loader later */
+ if (verbose)
+ logerror("2nd stage: write external memory\n");
+ }
+
+ /* scan the image, first (maybe only) time */
+ ctx.device = device;
+ ctx.total = ctx.count = 0;
+ status = parse[img_type](image, &ctx, is_external, ram_poke);
+ if (status < 0) {
+ logerror("unable to upload %s\n", path);
+ ret = status;
+ goto exit;
+ }
+
+ /* second part of 2nd stage: rescan */
+ // TODO: what should we do for non HEX images there?
+ if (stage) {
+ ctx.mode = skip_external;
+
+ /* if needed, halt the CPU while we overwrite the 1st stage loader */
+ if (cpucs_addr && !ezusb_cpucs(device, cpucs_addr, false))
+ {
+ ret = -1;
+ goto exit;
+ }
+
+ /* at least write the interrupt vectors (at 0x0000) for reset! */
+ rewind(image);
+ if (verbose)
+ logerror("2nd stage: write on-chip memory\n");
+ status = parse_ihex(image, &ctx, is_external, ram_poke);
+ if (status < 0) {
+ logerror("unable to completely upload %s\n", path);
+ ret = status;
+ goto exit;
+ }
+ }
+
+ if (verbose && (ctx.count != 0)) {
+ logerror("... WROTE: %d bytes, %d segments, avg %d\n",
+ (int)ctx.total, (int)ctx.count, (int)(ctx.total/ctx.count));
+ }
+
+ /* if required, reset the CPU so it runs what we just uploaded */
+ if (cpucs_addr && !ezusb_cpucs(device, cpucs_addr, true))
+ ret = -1;
+
+exit:
+ fclose(image);
+ return ret;
+}
--- /dev/null
+#ifndef __ezusb_H
+#define __ezusb_H
+/*
+ * Copyright © 2001 Stephen Williams (steve@icarus.com)
+ * Copyright © 2002 David Brownell (dbrownell@users.sourceforge.net)
+ * Copyright © 2013 Federico Manzan (f.manzan@gmail.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+#if !defined(_MSC_VER)
+#include <stdbool.h>
+#else
+#define __attribute__(x)
+#if !defined(bool)
+#define bool int
+#endif
+#if !defined(true)
+#define true (1 == 1)
+#endif
+#if !defined(false)
+#define false (!true)
+#endif
+#if defined(_PREFAST_)
+#pragma warning(disable:28193)
+#endif
+#endif
+
+#define FX_TYPE_UNDEFINED -1
+#define FX_TYPE_AN21 0 /* Original AnchorChips parts */
+#define FX_TYPE_FX1 1 /* Updated Cypress versions */
+#define FX_TYPE_FX2 2 /* USB 2.0 versions */
+#define FX_TYPE_FX2LP 3 /* Updated FX2 */
+#define FX_TYPE_FX3 4 /* USB 3.0 versions */
+#define FX_TYPE_MAX 5
+#define FX_TYPE_NAMES { "an21", "fx", "fx2", "fx2lp", "fx3" }
+
+#define IMG_TYPE_UNDEFINED -1
+#define IMG_TYPE_HEX 0 /* Intel HEX */
+#define IMG_TYPE_IIC 1 /* Cypress 8051 IIC */
+#define IMG_TYPE_BIX 2 /* Cypress 8051 BIX */
+#define IMG_TYPE_IMG 3 /* Cypress IMG format */
+#define IMG_TYPE_MAX 4
+#define IMG_TYPE_NAMES { "Intel HEX", "Cypress 8051 IIC", "Cypress 8051 BIX", "Cypress IMG format" }
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Automatically identified devices (VID, PID, type, designation).
+ * TODO: Could use some validation. Also where's the FX2?
+ */
+typedef struct {
+ uint16_t vid;
+ uint16_t pid;
+ int type;
+ const char* designation;
+} fx_known_device;
+
+#define FX_KNOWN_DEVICES { \
+ { 0x0547, 0x2122, FX_TYPE_AN21, "Cypress EZ-USB (2122S)" },\
+ { 0x0547, 0x2125, FX_TYPE_AN21, "Cypress EZ-USB (2121S/2125S)" },\
+ { 0x0547, 0x2126, FX_TYPE_AN21, "Cypress EZ-USB (2126S)" },\
+ { 0x0547, 0x2131, FX_TYPE_AN21, "Cypress EZ-USB (2131Q/2131S/2135S)" },\
+ { 0x0547, 0x2136, FX_TYPE_AN21, "Cypress EZ-USB (2136S)" },\
+ { 0x0547, 0x2225, FX_TYPE_AN21, "Cypress EZ-USB (2225)" },\
+ { 0x0547, 0x2226, FX_TYPE_AN21, "Cypress EZ-USB (2226)" },\
+ { 0x0547, 0x2235, FX_TYPE_AN21, "Cypress EZ-USB (2235)" },\
+ { 0x0547, 0x2236, FX_TYPE_AN21, "Cypress EZ-USB (2236)" },\
+ { 0x04b4, 0x6473, FX_TYPE_FX1, "Cypress EZ-USB FX1" },\
+ { 0x04b4, 0x8613, FX_TYPE_FX2LP, "Cypress EZ-USB FX2LP (68013A/68014A/68015A/68016A)" }, \
+ { 0x04b4, 0x00f3, FX_TYPE_FX3, "Cypress FX3" },\
+}
+
+/*
+ * This function uploads the firmware from the given file into RAM.
+ * Stage == 0 means this is a single stage load (or the first of
+ * two stages). Otherwise it's the second of two stages; the
+ * caller having preloaded the second stage loader.
+ *
+ * The target processor is reset at the end of this upload.
+ */
+extern int ezusb_load_ram(libusb_device_handle *device,
+ const char *path, int fx_type, int img_type, int stage);
+
+/*
+ * This function uploads the firmware from the given file into EEPROM.
+ * This uses the right CPUCS address to terminate the EEPROM load with
+ * a reset command where FX parts behave differently than FX2 ones.
+ * The configuration byte is as provided here (zero for an21xx parts)
+ * and the EEPROM type is set so that the microcontroller will boot
+ * from it.
+ *
+ * The caller must have preloaded a second stage loader that knows
+ * how to respond to the EEPROM write request.
+ */
+extern int ezusb_load_eeprom(libusb_device_handle *device,
+ const char *path, int fx_type, int img_type, int config);
+
+/* Verbosity level (default 1). Can be increased or decreased with options v/q */
+extern int verbose;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright © 2001 Stephen Williams (steve@icarus.com)
+ * Copyright © 2001-2002 David Brownell (dbrownell@users.sourceforge.net)
+ * Copyright © 2008 Roger Williams (rawqux@users.sourceforge.net)
+ * Copyright © 2012 Pete Batard (pete@akeo.ie)
+ * Copyright © 2013 Federico Manzan (f.manzan@gmail.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <getopt.h>
+
+#include "libusb.h"
+#include "ezusb.h"
+
+#if !defined(_WIN32) || defined(__CYGWIN__ )
+#include <syslog.h>
+static bool dosyslog = false;
+#include <strings.h>
+#define _stricmp strcasecmp
+#endif
+
+#ifndef FXLOAD_VERSION
+#define FXLOAD_VERSION (__DATE__ " (libusb)")
+#endif
+
+#ifndef ARRAYSIZE
+#define ARRAYSIZE(A) (sizeof(A)/sizeof((A)[0]))
+#endif
+
+void logerror(const char *format, ...)
+ __attribute__ ((format (__printf__, 1, 2)));
+
+void logerror(const char *format, ...)
+{
+ va_list ap;
+ va_start(ap, format);
+
+#if !defined(_WIN32) || defined(__CYGWIN__ )
+ if (dosyslog)
+ vsyslog(LOG_ERR, format, ap);
+ else
+#endif
+ vfprintf(stderr, format, ap);
+ va_end(ap);
+}
+
+static int print_usage(int error_code) {
+ fprintf(stderr, "\nUsage: fxload [-v] [-V] [-t type] [-d vid:pid] [-p bus,addr] [-s loader] -i firmware\n");
+ fprintf(stderr, " -i <path> -- Firmware to upload\n");
+ fprintf(stderr, " -s <path> -- Second stage loader\n");
+ fprintf(stderr, " -t <type> -- Target type: an21, fx, fx2, fx2lp, fx3\n");
+ fprintf(stderr, " -d <vid:pid> -- Target device, as an USB VID:PID\n");
+ fprintf(stderr, " -p <bus,addr> -- Target device, as a libusb bus number and device address path\n");
+ fprintf(stderr, " -v -- Increase verbosity\n");
+ fprintf(stderr, " -q -- Decrease verbosity (silent mode)\n");
+ fprintf(stderr, " -V -- Print program version\n");
+ return error_code;
+}
+
+#define FIRMWARE 0
+#define LOADER 1
+int main(int argc, char*argv[])
+{
+ fx_known_device known_device[] = FX_KNOWN_DEVICES;
+ const char *path[] = { NULL, NULL };
+ const char *device_id = NULL;
+ const char *device_path = getenv("DEVICE");
+ const char *type = NULL;
+ const char *fx_name[FX_TYPE_MAX] = FX_TYPE_NAMES;
+ const char *ext, *img_name[] = IMG_TYPE_NAMES;
+ int fx_type = FX_TYPE_UNDEFINED, img_type[ARRAYSIZE(path)];
+ int i, j, opt, status;
+ unsigned vid = 0, pid = 0;
+ unsigned busnum = 0, devaddr = 0, _busnum, _devaddr;
+ libusb_device *dev, **devs;
+ libusb_device_handle *device = NULL;
+ struct libusb_device_descriptor desc;
+
+ while ((opt = getopt(argc, argv, "qvV?hd:p:i:I:s:S:t:")) != EOF)
+ switch (opt) {
+
+ case 'd':
+ device_id = optarg;
+ if (sscanf(device_id, "%x:%x" , &vid, &pid) != 2 ) {
+ fputs ("please specify VID & PID as \"vid:pid\" in hexadecimal format\n", stderr);
+ return -1;
+ }
+ break;
+
+ case 'p':
+ device_path = optarg;
+ if (sscanf(device_path, "%u,%u", &busnum, &devaddr) != 2 ) {
+ fputs ("please specify bus number & device number as \"bus,dev\" in decimal format\n", stderr);
+ return -1;
+ }
+ break;
+
+ case 'i':
+ case 'I':
+ path[FIRMWARE] = optarg;
+ break;
+
+ case 's':
+ case 'S':
+ path[LOADER] = optarg;
+ break;
+
+ case 'V':
+ puts(FXLOAD_VERSION);
+ return 0;
+
+ case 't':
+ type = optarg;
+ break;
+
+ case 'v':
+ verbose++;
+ break;
+
+ case 'q':
+ verbose--;
+ break;
+
+ case '?':
+ case 'h':
+ default:
+ return print_usage(-1);
+
+ }
+
+ if (path[FIRMWARE] == NULL) {
+ logerror("no firmware specified!\n");
+ return print_usage(-1);
+ }
+ if ((device_id != NULL) && (device_path != NULL)) {
+ logerror("only one of -d or -p can be specified\n");
+ return print_usage(-1);
+ }
+
+ /* determine the target type */
+ if (type != NULL) {
+ for (i=0; i<FX_TYPE_MAX; i++) {
+ if (strcmp(type, fx_name[i]) == 0) {
+ fx_type = i;
+ break;
+ }
+ }
+ if (i >= FX_TYPE_MAX) {
+ logerror("illegal microcontroller type: %s\n", type);
+ return print_usage(-1);
+ }
+ }
+
+ /* open the device using libusb */
+ status = libusb_init(NULL);
+ if (status < 0) {
+ logerror("libusb_init() failed: %s\n", libusb_error_name(status));
+ return -1;
+ }
+ libusb_set_debug(NULL, verbose);
+
+ /* try to pick up missing parameters from known devices */
+ if ((type == NULL) || (device_id == NULL) || (device_path != NULL)) {
+ if (libusb_get_device_list(NULL, &devs) < 0) {
+ logerror("libusb_get_device_list() failed: %s\n", libusb_error_name(status));
+ goto err;
+ }
+ for (i=0; (dev=devs[i]) != NULL; i++) {
+ _busnum = libusb_get_bus_number(dev);
+ _devaddr = libusb_get_device_address(dev);
+ if ((type != NULL) && (device_path != NULL)) {
+ // if both a type and bus,addr were specified, we just need to find our match
+ if ((libusb_get_bus_number(dev) == busnum) && (libusb_get_device_address(dev) == devaddr))
+ break;
+ } else {
+ status = libusb_get_device_descriptor(dev, &desc);
+ if (status >= 0) {
+ if (verbose >= 3) {
+ logerror("examining %04x:%04x (%d,%d)\n",
+ desc.idVendor, desc.idProduct, _busnum, _devaddr);
+ }
+ for (j=0; j<ARRAYSIZE(known_device); j++) {
+ if ((desc.idVendor == known_device[j].vid)
+ && (desc.idProduct == known_device[j].pid)) {
+ if (// nothing was specified
+ ((type == NULL) && (device_id == NULL) && (device_path == NULL)) ||
+ // vid:pid was specified and we have a match
+ ((type == NULL) && (device_id != NULL) && (vid == desc.idVendor) && (pid == desc.idProduct)) ||
+ // bus,addr was specified and we have a match
+ ((type == NULL) && (device_path != NULL) && (busnum == _busnum) && (devaddr == _devaddr)) ||
+ // type was specified and we have a match
+ ((type != NULL) && (device_id == NULL) && (device_path == NULL) && (fx_type == known_device[j].type)) ) {
+ fx_type = known_device[j].type;
+ vid = desc.idVendor;
+ pid = desc.idProduct;
+ busnum = _busnum;
+ devaddr = _devaddr;
+ break;
+ }
+ }
+ }
+ if (j < ARRAYSIZE(known_device)) {
+ if (verbose)
+ logerror("found device '%s' [%04x:%04x] (%d,%d)\n",
+ known_device[j].designation, vid, pid, busnum, devaddr);
+ break;
+ }
+ }
+ }
+ }
+ if (dev == NULL) {
+ libusb_free_device_list(devs, 1);
+ libusb_exit(NULL);
+ logerror("could not find a known device - please specify type and/or vid:pid and/or bus,dev\n");
+ return print_usage(-1);
+ }
+ status = libusb_open(dev, &device);
+ libusb_free_device_list(devs, 1);
+ if (status < 0) {
+ logerror("libusb_open() failed: %s\n", libusb_error_name(status));
+ goto err;
+ }
+ } else if (device_id != NULL) {
+ device = libusb_open_device_with_vid_pid(NULL, (uint16_t)vid, (uint16_t)pid);
+ if (device == NULL) {
+ logerror("libusb_open() failed\n");
+ goto err;
+ }
+ }
+
+ /* We need to claim the first interface */
+ libusb_set_auto_detach_kernel_driver(device, 1);
+ status = libusb_claim_interface(device, 0);
+ if (status != LIBUSB_SUCCESS) {
+ libusb_close(device);
+ logerror("libusb_claim_interface failed: %s\n", libusb_error_name(status));
+ goto err;
+ }
+
+ if (verbose)
+ logerror("microcontroller type: %s\n", fx_name[fx_type]);
+
+ for (i=0; i<ARRAYSIZE(path); i++) {
+ if (path[i] != NULL) {
+ ext = path[i] + strlen(path[i]) - 4;
+ if ((_stricmp(ext, ".hex") == 0) || (strcmp(ext, ".ihx") == 0))
+ img_type[i] = IMG_TYPE_HEX;
+ else if (_stricmp(ext, ".iic") == 0)
+ img_type[i] = IMG_TYPE_IIC;
+ else if (_stricmp(ext, ".bix") == 0)
+ img_type[i] = IMG_TYPE_BIX;
+ else if (_stricmp(ext, ".img") == 0)
+ img_type[i] = IMG_TYPE_IMG;
+ else {
+ logerror("%s is not a recognized image type\n", path[i]);
+ goto err;
+ }
+ }
+ if (verbose && path[i] != NULL)
+ logerror("%s: type %s\n", path[i], img_name[img_type[i]]);
+ }
+
+ if (path[LOADER] == NULL) {
+ /* single stage, put into internal memory */
+ if (verbose > 1)
+ logerror("single stage: load on-chip memory\n");
+ status = ezusb_load_ram(device, path[FIRMWARE], fx_type, img_type[FIRMWARE], 0);
+ } else {
+ /* two-stage, put loader into internal memory */
+ if (verbose > 1)
+ logerror("1st stage: load 2nd stage loader\n");
+ status = ezusb_load_ram(device, path[LOADER], fx_type, img_type[LOADER], 0);
+ if (status == 0) {
+ /* two-stage, put firmware into internal memory */
+ if (verbose > 1)
+ logerror("2nd state: load on-chip memory\n");
+ status = ezusb_load_ram(device, path[FIRMWARE], fx_type, img_type[FIRMWARE], 1);
+ }
+ }
+
+ libusb_release_interface(device, 0);
+ libusb_close(device);
+ libusb_exit(NULL);
+ return status;
+err:
+ libusb_exit(NULL);
+ return -1;
+}
--- /dev/null
+/* Getopt for GNU.
+ NOTE: getopt is now part of the C library, so if you don't know what
+ "Keep this file name-space clean" means, talk to drepper@gnu.org
+ before changing it!
+ Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+\f
+/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
+ Ditto for AIX 3.2 and <stdlib.h>. */
+#ifndef _NO_PROTO
+# define _NO_PROTO
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+ reject `defined (const)'. */
+# ifndef const
+# define const
+# endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+ actually compiling the library itself. This code is part of the GNU C
+ Library, but also included in many other GNU distributions. Compiling
+ and linking in this code is a waste when using the GNU C library
+ (especially if it is a shared library). Rather than having every GNU
+ program understand `configure --with-gnu-libc' and omit the object files,
+ it is simpler to just do this in the source for each such file. */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+# include <gnu-versions.h>
+# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+# define ELIDE_CODE
+# endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+ to get __GNU_LIBRARY__ defined. */
+#ifdef __GNU_LIBRARY__
+/* Don't include stdlib.h for non-GNU C libraries because some of them
+ contain conflicting prototypes for getopt. */
+# include <stdlib.h>
+# include <unistd.h>
+#endif /* GNU C library. */
+
+#ifdef VMS
+# include <unixlib.h>
+# if HAVE_STRING_H - 0
+# include <string.h>
+# endif
+#endif
+
+#ifndef _
+/* This is for other GNU distributions with internationalized messages. */
+# if (HAVE_LIBINTL_H && ENABLE_NLS) || defined _LIBC
+# include <libintl.h>
+# ifndef _
+# define _(msgid) gettext (msgid)
+# endif
+# else
+# define _(msgid) (msgid)
+# endif
+#endif
+
+/* This version of `getopt' appears to the caller like standard Unix `getopt'
+ but it behaves differently for the user, since it allows the user
+ to intersperse the options with the other arguments.
+
+ As `getopt' works, it permutes the elements of ARGV so that,
+ when it is done, all the options precede everything else. Thus
+ all application programs are extended to handle flexible argument order.
+
+ Setting the environment variable POSIXLY_CORRECT disables permutation.
+ Then the behavior is completely standard.
+
+ GNU application programs can use a third alternative mode in which
+ they can distinguish the relative order of options and other arguments. */
+
+#include "getopt.h"
+
+/* For communication from `getopt' to the caller.
+ When `getopt' finds an option that takes an argument,
+ the argument value is returned here.
+ Also, when `ordering' is RETURN_IN_ORDER,
+ each non-option ARGV-element is returned here. */
+
+char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+ This is used for communication to and from the caller
+ and for communication between successive calls to `getopt'.
+
+ On entry to `getopt', zero means this is the first call; initialize.
+
+ When `getopt' returns -1, this is the index of the first of the
+ non-option elements that the caller should itself scan.
+
+ Otherwise, `optind' communicates from one call to the next
+ how much of ARGV has been scanned so far. */
+
+/* 1003.2 says this must be 1 before any call. */
+int optind = 1;
+
+/* Formerly, initialization of getopt depended on optind==0, which
+ causes problems with re-calling getopt as programs generally don't
+ know that. */
+
+int __getopt_initialized;
+
+/* The next char to be scanned in the option-element
+ in which the last option character we returned was found.
+ This allows us to pick up the scan where we left off.
+
+ If this is zero, or a null string, it means resume the scan
+ by advancing to the next ARGV-element. */
+
+static char *nextchar;
+
+/* Callers store zero here to inhibit the error message
+ for unrecognized options. */
+
+int opterr = 1;
+
+/* Set to an option character which was unrecognized.
+ This must be initialized on some systems to avoid linking in the
+ system's own getopt implementation. */
+
+int optopt = '?';
+
+/* Describe how to deal with options that follow non-option ARGV-elements.
+
+ If the caller did not specify anything,
+ the default is REQUIRE_ORDER if the environment variable
+ POSIXLY_CORRECT is defined, PERMUTE otherwise.
+
+ REQUIRE_ORDER means don't recognize them as options;
+ stop option processing when the first non-option is seen.
+ This is what Unix does.
+ This mode of operation is selected by either setting the environment
+ variable POSIXLY_CORRECT, or using `+' as the first character
+ of the list of option characters.
+
+ PERMUTE is the default. We permute the contents of ARGV as we scan,
+ so that eventually all the non-options are at the end. This allows options
+ to be given in any order, even with programs that were not written to
+ expect this.
+
+ RETURN_IN_ORDER is an option available to programs that were written
+ to expect options and other ARGV-elements in any order and that care about
+ the ordering of the two. We describe each non-option ARGV-element
+ as if it were the argument of an option with character code 1.
+ Using `-' as the first character of the list of option characters
+ selects this mode of operation.
+
+ The special argument `--' forces an end of option-scanning regardless
+ of the value of `ordering'. In the case of RETURN_IN_ORDER, only
+ `--' can cause `getopt' to return -1 with `optind' != ARGC. */
+
+static enum
+{
+ REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
+} ordering;
+
+/* Value of POSIXLY_CORRECT environment variable. */
+static char *posixly_correct;
+\f
+#ifdef __GNU_LIBRARY__
+/* We want to avoid inclusion of string.h with non-GNU libraries
+ because there are many ways it can cause trouble.
+ On some systems, it contains special magic macros that don't work
+ in GCC. */
+# include <string.h>
+# define my_index strchr
+#else
+
+# if HAVE_STRING_H
+# include <string.h>
+# else
+# include <strings.h>
+# endif
+
+/* Avoid depending on library functions or files
+ whose names are inconsistent. */
+
+#ifndef getenv
+#ifdef _MSC_VER
+// DDK will complain if you don't use the stdlib defined getenv
+#include <stdlib.h>
+#else
+extern char *getenv ();
+#endif
+#endif
+
+static char *
+my_index (str, chr)
+ const char *str;
+ int chr;
+{
+ while (*str)
+ {
+ if (*str == chr)
+ return (char *) str;
+ str++;
+ }
+ return 0;
+}
+
+/* If using GCC, we can safely declare strlen this way.
+ If not using GCC, it is ok not to declare it. */
+#ifdef __GNUC__
+/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
+ That was relevant to code that was here before. */
+# if (!defined __STDC__ || !__STDC__) && !defined strlen
+/* gcc with -traditional declares the built-in strlen to return int,
+ and has done so at least since version 2.4.5. -- rms. */
+extern int strlen (const char *);
+# endif /* not __STDC__ */
+#endif /* __GNUC__ */
+
+#endif /* not __GNU_LIBRARY__ */
+\f
+/* Handle permutation of arguments. */
+
+/* Describe the part of ARGV that contains non-options that have
+ been skipped. `first_nonopt' is the index in ARGV of the first of them;
+ `last_nonopt' is the index after the last of them. */
+
+static int first_nonopt;
+static int last_nonopt;
+
+#ifdef _LIBC
+/* Stored original parameters.
+ XXX This is no good solution. We should rather copy the args so
+ that we can compare them later. But we must not use malloc(3). */
+extern int __libc_argc;
+extern char **__libc_argv;
+
+/* Bash 2.0 gives us an environment variable containing flags
+ indicating ARGV elements that should not be considered arguments. */
+
+# ifdef USE_NONOPTION_FLAGS
+/* Defined in getopt_init.c */
+extern char *__getopt_nonoption_flags;
+
+static int nonoption_flags_max_len;
+static int nonoption_flags_len;
+# endif
+
+# ifdef USE_NONOPTION_FLAGS
+# define SWAP_FLAGS(ch1, ch2) \
+ if (nonoption_flags_len > 0) \
+ { \
+ char __tmp = __getopt_nonoption_flags[ch1]; \
+ __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \
+ __getopt_nonoption_flags[ch2] = __tmp; \
+ }
+# else
+# define SWAP_FLAGS(ch1, ch2)
+# endif
+#else /* !_LIBC */
+# define SWAP_FLAGS(ch1, ch2)
+#endif /* _LIBC */
+
+/* Exchange two adjacent subsequences of ARGV.
+ One subsequence is elements [first_nonopt,last_nonopt)
+ which contains all the non-options that have been skipped so far.
+ The other is elements [last_nonopt,optind), which contains all
+ the options processed since those non-options were skipped.
+
+ `first_nonopt' and `last_nonopt' are relocated so that they describe
+ the new indices of the non-options in ARGV after they are moved. */
+
+#if defined __STDC__ && __STDC__
+static void exchange (char **);
+#endif
+
+static void
+exchange (argv)
+ char **argv;
+{
+ int bottom = first_nonopt;
+ int middle = last_nonopt;
+ int top = optind;
+ char *tem;
+
+ /* Exchange the shorter segment with the far end of the longer segment.
+ That puts the shorter segment into the right place.
+ It leaves the longer segment in the right place overall,
+ but it consists of two parts that need to be swapped next. */
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+ /* First make sure the handling of the `__getopt_nonoption_flags'
+ string can work normally. Our top argument must be in the range
+ of the string. */
+ if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len)
+ {
+ /* We must extend the array. The user plays games with us and
+ presents new arguments. */
+ char *new_str = malloc (top + 1);
+ if (new_str == NULL)
+ nonoption_flags_len = nonoption_flags_max_len = 0;
+ else
+ {
+ memset (__mempcpy (new_str, __getopt_nonoption_flags,
+ nonoption_flags_max_len),
+ '\0', top + 1 - nonoption_flags_max_len);
+ nonoption_flags_max_len = top + 1;
+ __getopt_nonoption_flags = new_str;
+ }
+ }
+#endif
+
+ while (top > middle && middle > bottom)
+ {
+ if (top - middle > middle - bottom)
+ {
+ /* Bottom segment is the short one. */
+ int len = middle - bottom;
+ register int i;
+
+ /* Swap it with the top part of the top segment. */
+ for (i = 0; i < len; i++)
+ {
+ tem = argv[bottom + i];
+ argv[bottom + i] = argv[top - (middle - bottom) + i];
+ argv[top - (middle - bottom) + i] = tem;
+ SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
+ }
+ /* Exclude the moved bottom segment from further swapping. */
+ top -= len;
+ }
+ else
+ {
+ /* Top segment is the short one. */
+ int len = top - middle;
+ register int i;
+
+ /* Swap it with the bottom part of the bottom segment. */
+ for (i = 0; i < len; i++)
+ {
+ tem = argv[bottom + i];
+ argv[bottom + i] = argv[middle + i];
+ argv[middle + i] = tem;
+ SWAP_FLAGS (bottom + i, middle + i);
+ }
+ /* Exclude the moved top segment from further swapping. */
+ bottom += len;
+ }
+ }
+
+ /* Update records for the slots the non-options now occupy. */
+
+ first_nonopt += (optind - last_nonopt);
+ last_nonopt = optind;
+}
+
+/* Initialize the internal data when the first call is made. */
+
+#if defined __STDC__ && __STDC__
+static const char *_getopt_initialize (int, char *const *, const char *);
+#endif
+static const char *
+_getopt_initialize (argc, argv, optstring)
+ int argc;
+ char *const *argv;
+ const char *optstring;
+{
+ /* Start processing options with ARGV-element 1 (since ARGV-element 0
+ is the program name); the sequence of previously skipped
+ non-option ARGV-elements is empty. */
+
+ first_nonopt = last_nonopt = optind;
+
+ nextchar = NULL;
+
+ posixly_correct = getenv ("POSIXLY_CORRECT");
+
+ /* Determine how to handle the ordering of options and nonoptions. */
+
+ if (optstring[0] == '-')
+ {
+ ordering = RETURN_IN_ORDER;
+ ++optstring;
+ }
+ else if (optstring[0] == '+')
+ {
+ ordering = REQUIRE_ORDER;
+ ++optstring;
+ }
+ else if (posixly_correct != NULL)
+ ordering = REQUIRE_ORDER;
+ else
+ ordering = PERMUTE;
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+ if (posixly_correct == NULL
+ && argc == __libc_argc && argv == __libc_argv)
+ {
+ if (nonoption_flags_max_len == 0)
+ {
+ if (__getopt_nonoption_flags == NULL
+ || __getopt_nonoption_flags[0] == '\0')
+ nonoption_flags_max_len = -1;
+ else
+ {
+ const char *orig_str = __getopt_nonoption_flags;
+ int len = nonoption_flags_max_len = strlen (orig_str);
+ if (nonoption_flags_max_len < argc)
+ nonoption_flags_max_len = argc;
+ __getopt_nonoption_flags =
+ (char *) malloc (nonoption_flags_max_len);
+ if (__getopt_nonoption_flags == NULL)
+ nonoption_flags_max_len = -1;
+ else
+ memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
+ '\0', nonoption_flags_max_len - len);
+ }
+ }
+ nonoption_flags_len = nonoption_flags_max_len;
+ }
+ else
+ nonoption_flags_len = 0;
+#endif
+
+ return optstring;
+}
+\f
+/* Scan elements of ARGV (whose length is ARGC) for option characters
+ given in OPTSTRING.
+
+ If an element of ARGV starts with '-', and is not exactly "-" or "--",
+ then it is an option element. The characters of this element
+ (aside from the initial '-') are option characters. If `getopt'
+ is called repeatedly, it returns successively each of the option characters
+ from each of the option elements.
+
+ If `getopt' finds another option character, it returns that character,
+ updating `optind' and `nextchar' so that the next call to `getopt' can
+ resume the scan with the following option character or ARGV-element.
+
+ If there are no more option characters, `getopt' returns -1.
+ Then `optind' is the index in ARGV of the first ARGV-element
+ that is not an option. (The ARGV-elements have been permuted
+ so that those that are not options now come last.)
+
+ OPTSTRING is a string containing the legitimate option characters.
+ If an option character is seen that is not listed in OPTSTRING,
+ return '?' after printing an error message. If you set `opterr' to
+ zero, the error message is suppressed but we still return '?'.
+
+ If a char in OPTSTRING is followed by a colon, that means it wants an arg,
+ so the following text in the same ARGV-element, or the text of the following
+ ARGV-element, is returned in `optarg'. Two colons mean an option that
+ wants an optional arg; if there is text in the current ARGV-element,
+ it is returned in `optarg', otherwise `optarg' is set to zero.
+
+ If OPTSTRING starts with `-' or `+', it requests different methods of
+ handling the non-option ARGV-elements.
+ See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
+
+ Long-named options begin with `--' instead of `-'.
+ Their names may be abbreviated as long as the abbreviation is unique
+ or is an exact match for some defined option. If they have an
+ argument, it follows the option name in the same ARGV-element, separated
+ from the option name by a `=', or else the in next ARGV-element.
+ When `getopt' finds a long-named option, it returns 0 if that option's
+ `flag' field is nonzero, the value of the option's `val' field
+ if the `flag' field is zero.
+
+ The elements of ARGV aren't really const, because we permute them.
+ But we pretend they're const in the prototype to be compatible
+ with other systems.
+
+ LONGOPTS is a vector of `struct option' terminated by an
+ element containing a name which is zero.
+
+ LONGIND returns the index in LONGOPT of the long-named option found.
+ It is only valid when a long-named option has been found by the most
+ recent call.
+
+ If LONG_ONLY is nonzero, '-' as well as '--' can introduce
+ long-named options. */
+
+int
+_getopt_internal (argc, argv, optstring, longopts, longind, long_only)
+ int argc;
+ char *const *argv;
+ const char *optstring;
+ const struct option *longopts;
+ int *longind;
+ int long_only;
+{
+ int print_errors = opterr;
+ if (optstring[0] == ':')
+ print_errors = 0;
+
+ if (argc < 1)
+ return -1;
+
+ optarg = NULL;
+
+ if (optind == 0 || !__getopt_initialized)
+ {
+ if (optind == 0)
+ optind = 1; /* Don't scan ARGV[0], the program name. */
+ optstring = _getopt_initialize (argc, argv, optstring);
+ __getopt_initialized = 1;
+ }
+
+ /* Test whether ARGV[optind] points to a non-option argument.
+ Either it does not have option syntax, or there is an environment flag
+ from the shell indicating it is not an option. The later information
+ is only used when the used in the GNU libc. */
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \
+ || (optind < nonoption_flags_len \
+ && __getopt_nonoption_flags[optind] == '1'))
+#else
+# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0')
+#endif
+
+ if (nextchar == NULL || *nextchar == '\0')
+ {
+ /* Advance to the next ARGV-element. */
+
+ /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
+ moved back by the user (who may also have changed the arguments). */
+ if (last_nonopt > optind)
+ last_nonopt = optind;
+ if (first_nonopt > optind)
+ first_nonopt = optind;
+
+ if (ordering == PERMUTE)
+ {
+ /* If we have just processed some options following some non-options,
+ exchange them so that the options come first. */
+
+ if (first_nonopt != last_nonopt && last_nonopt != optind)
+ exchange ((char **) argv);
+ else if (last_nonopt != optind)
+ first_nonopt = optind;
+
+ /* Skip any additional non-options
+ and extend the range of non-options previously skipped. */
+
+ while (optind < argc && NONOPTION_P)
+ optind++;
+ last_nonopt = optind;
+ }
+
+ /* The special ARGV-element `--' means premature end of options.
+ Skip it like a null option,
+ then exchange with previous non-options as if it were an option,
+ then skip everything else like a non-option. */
+
+ if (optind != argc && !strcmp (argv[optind], "--"))
+ {
+ optind++;
+
+ if (first_nonopt != last_nonopt && last_nonopt != optind)
+ exchange ((char **) argv);
+ else if (first_nonopt == last_nonopt)
+ first_nonopt = optind;
+ last_nonopt = argc;
+
+ optind = argc;
+ }
+
+ /* If we have done all the ARGV-elements, stop the scan
+ and back over any non-options that we skipped and permuted. */
+
+ if (optind == argc)
+ {
+ /* Set the next-arg-index to point at the non-options
+ that we previously skipped, so the caller will digest them. */
+ if (first_nonopt != last_nonopt)
+ optind = first_nonopt;
+ return -1;
+ }
+
+ /* If we have come to a non-option and did not permute it,
+ either stop the scan or describe it to the caller and pass it by. */
+
+ if (NONOPTION_P)
+ {
+ if (ordering == REQUIRE_ORDER)
+ return -1;
+ optarg = argv[optind++];
+ return 1;
+ }
+
+ /* We have found another option-ARGV-element.
+ Skip the initial punctuation. */
+
+ nextchar = (argv[optind] + 1
+ + (longopts != NULL && argv[optind][1] == '-'));
+ }
+
+ /* Decode the current option-ARGV-element. */
+
+ /* Check whether the ARGV-element is a long option.
+
+ If long_only and the ARGV-element has the form "-f", where f is
+ a valid short option, don't consider it an abbreviated form of
+ a long option that starts with f. Otherwise there would be no
+ way to give the -f short option.
+
+ On the other hand, if there's a long option "fubar" and
+ the ARGV-element is "-fu", do consider that an abbreviation of
+ the long option, just like "--fu", and not "-f" with arg "u".
+
+ This distinction seems to be the most useful approach. */
+
+ if (longopts != NULL
+ && (argv[optind][1] == '-'
+ || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
+ {
+ char *nameend;
+ const struct option *p;
+ const struct option *pfound = NULL;
+ int exact = 0;
+ int ambig = 0;
+ int indfound = -1;
+ int option_index;
+
+ for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
+ /* Do nothing. */ ;
+
+ /* Test all long options for either exact match
+ or abbreviated matches. */
+ for (p = longopts, option_index = 0; p->name; p++, option_index++)
+ if (!strncmp (p->name, nextchar, nameend - nextchar))
+ {
+ if ((unsigned int) (nameend - nextchar)
+ == (unsigned int) strlen (p->name))
+ {
+ /* Exact match found. */
+ pfound = p;
+ indfound = option_index;
+ exact = 1;
+ break;
+ }
+ else if (pfound == NULL)
+ {
+ /* First nonexact match found. */
+ pfound = p;
+ indfound = option_index;
+ }
+ else if (long_only
+ || pfound->has_arg != p->has_arg
+ || pfound->flag != p->flag
+ || pfound->val != p->val)
+ /* Second or later nonexact match found. */
+ ambig = 1;
+ }
+
+ if (ambig && !exact)
+ {
+ if (print_errors)
+ fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
+ argv[0], argv[optind]);
+ nextchar += strlen (nextchar);
+ optind++;
+ optopt = 0;
+ return '?';
+ }
+
+ if (pfound != NULL)
+ {
+ option_index = indfound;
+ optind++;
+ if (*nameend)
+ {
+ /* Don't test has_arg with >, because some C compilers don't
+ allow it to be used on enums. */
+ if (pfound->has_arg)
+ optarg = nameend + 1;
+ else
+ {
+ if (print_errors)
+ {
+ if (argv[optind - 1][1] == '-')
+ /* --option */
+ fprintf (stderr,
+ _("%s: option `--%s' doesn't allow an argument\n"),
+ argv[0], pfound->name);
+ else
+ /* +option or -option */
+ fprintf (stderr,
+ _("%s: option `%c%s' doesn't allow an argument\n"),
+ argv[0], argv[optind - 1][0], pfound->name);
+ }
+
+ nextchar += strlen (nextchar);
+
+ optopt = pfound->val;
+ return '?';
+ }
+ }
+ else if (pfound->has_arg == 1)
+ {
+ if (optind < argc)
+ optarg = argv[optind++];
+ else
+ {
+ if (print_errors)
+ fprintf (stderr,
+ _("%s: option `%s' requires an argument\n"),
+ argv[0], argv[optind - 1]);
+ nextchar += strlen (nextchar);
+ optopt = pfound->val;
+ return optstring[0] == ':' ? ':' : '?';
+ }
+ }
+ nextchar += strlen (nextchar);
+ if (longind != NULL)
+ *longind = option_index;
+ if (pfound->flag)
+ {
+ *(pfound->flag) = pfound->val;
+ return 0;
+ }
+ return pfound->val;
+ }
+
+ /* Can't find it as a long option. If this is not getopt_long_only,
+ or the option starts with '--' or is not a valid short
+ option, then it's an error.
+ Otherwise interpret it as a short option. */
+ if (!long_only || argv[optind][1] == '-'
+ || my_index (optstring, *nextchar) == NULL)
+ {
+ if (print_errors)
+ {
+ if (argv[optind][1] == '-')
+ /* --option */
+ fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
+ argv[0], nextchar);
+ else
+ /* +option or -option */
+ fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
+ argv[0], argv[optind][0], nextchar);
+ }
+ nextchar = (char *) "";
+ optind++;
+ optopt = 0;
+ return '?';
+ }
+ }
+
+ /* Look at and handle the next short option-character. */
+
+ {
+ char c = *nextchar++;
+ char *temp = my_index (optstring, c);
+
+ /* Increment `optind' when we start to process its last character. */
+ if (*nextchar == '\0')
+ ++optind;
+
+ if (temp == NULL || c == ':')
+ {
+ if (print_errors)
+ {
+ if (posixly_correct)
+ /* 1003.2 specifies the format of this message. */
+ fprintf (stderr, _("%s: illegal option -- %c\n"),
+ argv[0], c);
+ else
+ fprintf (stderr, _("%s: invalid option -- %c\n"),
+ argv[0], c);
+ }
+ optopt = c;
+ return '?';
+ }
+ /* Convenience. Treat POSIX -W foo same as long option --foo */
+ if (temp[0] == 'W' && temp[1] == ';')
+ {
+ char *nameend;
+ const struct option *p;
+ const struct option *pfound = NULL;
+ int exact = 0;
+ int ambig = 0;
+ int indfound = 0;
+ int option_index;
+
+ /* This is an option that requires an argument. */
+ if (*nextchar != '\0')
+ {
+ optarg = nextchar;
+ /* If we end this ARGV-element by taking the rest as an arg,
+ we must advance to the next element now. */
+ optind++;
+ }
+ else if (optind == argc)
+ {
+ if (print_errors)
+ {
+ /* 1003.2 specifies the format of this message. */
+ fprintf (stderr, _("%s: option requires an argument -- %c\n"),
+ argv[0], c);
+ }
+ optopt = c;
+ if (optstring[0] == ':')
+ c = ':';
+ else
+ c = '?';
+ return c;
+ }
+ else
+ /* We already incremented `optind' once;
+ increment it again when taking next ARGV-elt as argument. */
+ optarg = argv[optind++];
+
+ /* optarg is now the argument, see if it's in the
+ table of longopts. */
+
+ for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++)
+ /* Do nothing. */ ;
+
+ /* Test all long options for either exact match
+ or abbreviated matches. */
+ for (p = longopts, option_index = 0; p != NULL && p->name; p++, option_index++)
+ if (!strncmp (p->name, nextchar, nameend - nextchar))
+ {
+ if ((unsigned int) (nameend - nextchar) == strlen (p->name))
+ {
+ /* Exact match found. */
+ pfound = p;
+ indfound = option_index;
+ exact = 1;
+ break;
+ }
+ else if (pfound == NULL)
+ {
+ /* First nonexact match found. */
+ pfound = p;
+ indfound = option_index;
+ }
+ else
+ /* Second or later nonexact match found. */
+ ambig = 1;
+ }
+ if (ambig && !exact)
+ {
+ if (print_errors)
+ fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
+ argv[0], argv[optind]);
+ nextchar += strlen (nextchar);
+ optind++;
+ return '?';
+ }
+ if (pfound != NULL)
+ {
+ option_index = indfound;
+ if (*nameend)
+ {
+ /* Don't test has_arg with >, because some C compilers don't
+ allow it to be used on enums. */
+ if (pfound->has_arg)
+ optarg = nameend + 1;
+ else
+ {
+ if (print_errors)
+ fprintf (stderr, _("\
+%s: option `-W %s' doesn't allow an argument\n"),
+ argv[0], pfound->name);
+
+ nextchar += strlen (nextchar);
+ return '?';
+ }
+ }
+ else if (pfound->has_arg == 1)
+ {
+ if (optind < argc)
+ optarg = argv[optind++];
+ else
+ {
+ if (print_errors)
+ fprintf (stderr,
+ _("%s: option `%s' requires an argument\n"),
+ argv[0], argv[optind - 1]);
+ nextchar += strlen (nextchar);
+ return optstring[0] == ':' ? ':' : '?';
+ }
+ }
+ nextchar += strlen (nextchar);
+ if (longind != NULL)
+ *longind = option_index;
+ if (pfound->flag)
+ {
+ *(pfound->flag) = pfound->val;
+ return 0;
+ }
+ return pfound->val;
+ }
+ nextchar = NULL;
+ return 'W'; /* Let the application handle it. */
+ }
+ if (temp[1] == ':')
+ {
+ if (temp[2] == ':')
+ {
+ /* This is an option that accepts an argument optionally. */
+ if (*nextchar != '\0')
+ {
+ optarg = nextchar;
+ optind++;
+ }
+ else
+ optarg = NULL;
+ nextchar = NULL;
+ }
+ else
+ {
+ /* This is an option that requires an argument. */
+ if (*nextchar != '\0')
+ {
+ optarg = nextchar;
+ /* If we end this ARGV-element by taking the rest as an arg,
+ we must advance to the next element now. */
+ optind++;
+ }
+ else if (optind == argc)
+ {
+ if (print_errors)
+ {
+ /* 1003.2 specifies the format of this message. */
+ fprintf (stderr,
+ _("%s: option requires an argument -- %c\n"),
+ argv[0], c);
+ }
+ optopt = c;
+ if (optstring[0] == ':')
+ c = ':';
+ else
+ c = '?';
+ }
+ else
+ /* We already incremented `optind' once;
+ increment it again when taking next ARGV-elt as argument. */
+ optarg = argv[optind++];
+ nextchar = NULL;
+ }
+ }
+ return c;
+ }
+}
+
+int
+getopt (argc, argv, optstring)
+ int argc;
+ char *const *argv;
+ const char *optstring;
+{
+ return _getopt_internal (argc, argv, optstring,
+ (const struct option *) 0,
+ (int *) 0,
+ 0);
+}
+
+#endif /* Not ELIDE_CODE. */
+\f
+#ifdef TEST
+
+/* Compile with -DTEST to make an executable for use in testing
+ the above definition of `getopt'. */
+
+int
+main (argc, argv)
+ int argc;
+ char **argv;
+{
+ int c;
+ int digit_optind = 0;
+
+ while (1)
+ {
+ int this_option_optind = optind ? optind : 1;
+
+ c = getopt (argc, argv, "abc:d:0123456789");
+ if (c == -1)
+ break;
+
+ switch (c)
+ {
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ if (digit_optind != 0 && digit_optind != this_option_optind)
+ printf ("digits occur in two different argv-elements.\n");
+ digit_optind = this_option_optind;
+ printf ("option %c\n", c);
+ break;
+
+ case 'a':
+ printf ("option a\n");
+ break;
+
+ case 'b':
+ printf ("option b\n");
+ break;
+
+ case 'c':
+ printf ("option c with value `%s'\n", optarg);
+ break;
+
+ case '?':
+ break;
+
+ default:
+ printf ("?? getopt returned character code 0%o ??\n", c);
+ }
+ }
+
+ if (optind < argc)
+ {
+ printf ("non-option ARGV-elements: ");
+ while (optind < argc)
+ printf ("%s ", argv[optind++]);
+ printf ("\n");
+ }
+
+ exit (0);
+}
+
+#endif /* TEST */
--- /dev/null
+/* Declarations for getopt.
+ Copyright (C) 1989-1994, 1996-1999, 2001 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#ifndef _GETOPT_H
+
+#ifndef __need_getopt
+# define _GETOPT_H 1
+#endif
+
+/* If __GNU_LIBRARY__ is not already defined, either we are being used
+ standalone, or this is the first header included in the source file.
+ If we are being used with glibc, we need to include <features.h>, but
+ that does not exist if we are standalone. So: if __GNU_LIBRARY__ is
+ not defined, include <ctype.h>, which will pull in <features.h> for us
+ if it's from glibc. (Why ctype.h? It's guaranteed to exist and it
+ doesn't flood the namespace with stuff the way some other headers do.) */
+#if !defined __GNU_LIBRARY__
+# include <ctype.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+ When `getopt' finds an option that takes an argument,
+ the argument value is returned here.
+ Also, when `ordering' is RETURN_IN_ORDER,
+ each non-option ARGV-element is returned here. */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+ This is used for communication to and from the caller
+ and for communication between successive calls to `getopt'.
+
+ On entry to `getopt', zero means this is the first call; initialize.
+
+ When `getopt' returns -1, this is the index of the first of the
+ non-option elements that the caller should itself scan.
+
+ Otherwise, `optind' communicates from one call to the next
+ how much of ARGV has been scanned so far. */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+ for unrecognized options. */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized. */
+
+extern int optopt;
+
+#ifndef __need_getopt
+/* Describe the long-named options requested by the application.
+ The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+ of `struct option' terminated by an element containing a name which is
+ zero.
+
+ The field `has_arg' is:
+ no_argument (or 0) if the option does not take an argument,
+ required_argument (or 1) if the option requires an argument,
+ optional_argument (or 2) if the option takes an optional argument.
+
+ If the field `flag' is not NULL, it points to a variable that is set
+ to the value given in the field `val' when the option is found, but
+ left unchanged if the option is not found.
+
+ To have a long-named option do something other than set an `int' to
+ a compiled-in constant, such as set a value from `optarg', set the
+ option's `flag' field to zero and its `val' field to a nonzero
+ value (the equivalent single-letter option character, if there is
+ one). For long options that have a zero `flag' field, `getopt'
+ returns the contents of the `val' field. */
+
+struct option
+{
+# if (defined __STDC__ && __STDC__) || defined __cplusplus
+ const char *name;
+# else
+ char *name;
+# endif
+ /* has_arg can't be an enum because some compilers complain about
+ type mismatches in all the code that assumes it is an int. */
+ int has_arg;
+ int *flag;
+ int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'. */
+
+# define no_argument 0
+# define required_argument 1
+# define optional_argument 2
+#endif /* need getopt */
+
+
+/* Get definitions and prototypes for functions to process the
+ arguments in ARGV (ARGC of them, minus the program name) for
+ options given in OPTS.
+
+ Return the option character from OPTS just read. Return -1 when
+ there are no more options. For unrecognized options, or options
+ missing arguments, `optopt' is set to the option letter, and '?' is
+ returned.
+
+ The OPTS string is a list of characters which are recognized option
+ letters, optionally followed by colons, specifying that that letter
+ takes an argument, to be placed in `optarg'.
+
+ If a letter in OPTS is followed by two colons, its argument is
+ optional. This behavior is specific to the GNU `getopt'.
+
+ The argument `--' causes premature termination of argument
+ scanning, explicitly telling `getopt' that there are no more
+ options.
+
+ If OPTS begins with `--', then non-option arguments are treated as
+ arguments to the option '\0'. This behavior is specific to the GNU
+ `getopt'. */
+
+#if (defined __STDC__ && __STDC__) || defined __cplusplus
+# ifdef __GNU_LIBRARY__
+/* Many other libraries have conflicting prototypes for getopt, with
+ differences in the consts, in stdlib.h. To avoid compilation
+ errors, only prototype getopt for the GNU C library. */
+extern int getopt (int __argc, char *const *__argv, const char *__shortopts);
+# else /* not __GNU_LIBRARY__ */
+extern int getopt ();
+# endif /* __GNU_LIBRARY__ */
+
+# ifndef __need_getopt
+extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts,
+ const struct option *__longopts, int *__longind);
+extern int getopt_long_only (int __argc, char *const *__argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind);
+
+/* Internal only. Users should not call this directly. */
+extern int _getopt_internal (int __argc, char *const *__argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind,
+ int __long_only);
+# endif
+#else /* not __STDC__ */
+extern int getopt ();
+# ifndef __need_getopt
+extern int getopt_long ();
+extern int getopt_long_only ();
+
+extern int _getopt_internal ();
+# endif
+#endif /* __STDC__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Make sure we later can get all the definitions and declarations. */
+#undef __need_getopt
+
+#endif /* getopt.h */
--- /dev/null
+/* getopt_long and getopt_long_only entry points for GNU getopt.
+ Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+\f
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "getopt.h"
+
+#if !defined __STDC__ || !__STDC__
+/* This is a separate conditional since some stdc systems
+ reject `defined (const)'. */
+#ifndef const
+#define const
+#endif
+#endif
+
+#include <stdio.h>
+
+/* Comment out all this code if we are using the GNU C Library, and are not
+ actually compiling the library itself. This code is part of the GNU C
+ Library, but also included in many other GNU distributions. Compiling
+ and linking in this code is a waste when using the GNU C library
+ (especially if it is a shared library). Rather than having every GNU
+ program understand `configure --with-gnu-libc' and omit the object files,
+ it is simpler to just do this in the source for each such file. */
+
+#define GETOPT_INTERFACE_VERSION 2
+#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
+#include <gnu-versions.h>
+#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
+#define ELIDE_CODE
+#endif
+#endif
+
+#ifndef ELIDE_CODE
+
+
+/* This needs to come after some library #include
+ to get __GNU_LIBRARY__ defined. */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+int
+getopt_long (argc, argv, options, long_options, opt_index)
+ int argc;
+ char *const *argv;
+ const char *options;
+ const struct option *long_options;
+ int *opt_index;
+{
+ return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
+}
+
+/* Like getopt_long, but '-' as well as '--' can indicate a long option.
+ If an option that starts with '-' (not '--') doesn't match a long option,
+ but does match a short option, it is parsed as a short option
+ instead. */
+
+int
+getopt_long_only (argc, argv, options, long_options, opt_index)
+ int argc;
+ char *const *argv;
+ const char *options;
+ const struct option *long_options;
+ int *opt_index;
+{
+ return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
+}
+
+
+#endif /* Not ELIDE_CODE. */
+\f
+#ifdef TEST
+
+#include <stdio.h>
+
+int
+main (argc, argv)
+ int argc;
+ char **argv;
+{
+ int c;
+ int digit_optind = 0;
+
+ while (1)
+ {
+ int this_option_optind = optind ? optind : 1;
+ int option_index = 0;
+ static struct option long_options[] =
+ {
+ {"add", 1, 0, 0},
+ {"append", 0, 0, 0},
+ {"delete", 1, 0, 0},
+ {"verbose", 0, 0, 0},
+ {"create", 0, 0, 0},
+ {"file", 1, 0, 0},
+ {0, 0, 0, 0}
+ };
+
+ c = getopt_long (argc, argv, "abc:d:0123456789",
+ long_options, &option_index);
+ if (c == -1)
+ break;
+
+ switch (c)
+ {
+ case 0:
+ printf ("option %s", long_options[option_index].name);
+ if (optarg)
+ printf (" with arg %s", optarg);
+ printf ("\n");
+ break;
+
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ if (digit_optind != 0 && digit_optind != this_option_optind)
+ printf ("digits occur in two different argv-elements.\n");
+ digit_optind = this_option_optind;
+ printf ("option %c\n", c);
+ break;
+
+ case 'a':
+ printf ("option a\n");
+ break;
+
+ case 'b':
+ printf ("option b\n");
+ break;
+
+ case 'c':
+ printf ("option c with value `%s'\n", optarg);
+ break;
+
+ case 'd':
+ printf ("option d with value `%s'\n", optarg);
+ break;
+
+ case '?':
+ break;
+
+ default:
+ printf ("?? getopt returned character code 0%o ??\n", c);
+ }
+ }
+
+ if (optind < argc)
+ {
+ printf ("non-option ARGV-elements: ");
+ while (optind < argc)
+ printf ("%s ", argv[optind++]);
+ printf ("\n");
+ }
+
+ exit (0);
+}
+
+#endif /* TEST */
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * libusb example program for hotplug API
+ * Copyright © 2012-2013 Nathan Hjelm <hjelmn@mac.ccom>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include "libusb.h"
+
+int done = 0;
+libusb_device_handle *handle = NULL;
+
+static int LIBUSB_CALL hotplug_callback(libusb_context *ctx, libusb_device *dev, libusb_hotplug_event event, void *user_data)
+{
+ struct libusb_device_descriptor desc;
+ int rc;
+
+ rc = libusb_get_device_descriptor(dev, &desc);
+ if (LIBUSB_SUCCESS != rc) {
+ fprintf (stderr, "Error getting device descriptor\n");
+ }
+
+ printf ("Device attached: %04x:%04x\n", desc.idVendor, desc.idProduct);
+
+ if (handle) {
+ libusb_close (handle);
+ handle = NULL;
+ }
+
+ rc = libusb_open (dev, &handle);
+ if (LIBUSB_SUCCESS != rc) {
+ fprintf (stderr, "Error opening device\n");
+ }
+
+ done++;
+
+ return 0;
+}
+
+static int LIBUSB_CALL hotplug_callback_detach(libusb_context *ctx, libusb_device *dev, libusb_hotplug_event event, void *user_data)
+{
+ printf ("Device detached\n");
+
+ if (handle) {
+ libusb_close (handle);
+ handle = NULL;
+ }
+
+ done++;
+
+ return 0;
+}
+
+int main(int argc, char *argv[])
+{
+ libusb_hotplug_callback_handle hp[2];
+ int product_id, vendor_id, class_id;
+ int rc;
+
+ vendor_id = (argc > 1) ? strtol (argv[1], NULL, 0) : 0x045a;
+ product_id = (argc > 2) ? strtol (argv[2], NULL, 0) : 0x5005;
+ class_id = (argc > 3) ? strtol (argv[3], NULL, 0) : LIBUSB_HOTPLUG_MATCH_ANY;
+
+ rc = libusb_init (NULL);
+ if (rc < 0)
+ {
+ printf("failed to initialise libusb: %s\n", libusb_error_name(rc));
+ return EXIT_FAILURE;
+ }
+
+ if (!libusb_has_capability (LIBUSB_CAP_HAS_HOTPLUG)) {
+ printf ("Hotplug capabilites are not supported on this platform\n");
+ libusb_exit (NULL);
+ return EXIT_FAILURE;
+ }
+
+ rc = libusb_hotplug_register_callback (NULL, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED, 0, vendor_id,
+ product_id, class_id, hotplug_callback, NULL, &hp[0]);
+ if (LIBUSB_SUCCESS != rc) {
+ fprintf (stderr, "Error registering callback 0\n");
+ libusb_exit (NULL);
+ return EXIT_FAILURE;
+ }
+
+ rc = libusb_hotplug_register_callback (NULL, LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT, 0, vendor_id,
+ product_id,class_id, hotplug_callback_detach, NULL, &hp[1]);
+ if (LIBUSB_SUCCESS != rc) {
+ fprintf (stderr, "Error registering callback 1\n");
+ libusb_exit (NULL);
+ return EXIT_FAILURE;
+ }
+
+ while (done < 2) {
+ rc = libusb_handle_events (NULL);
+ if (rc < 0)
+ printf("libusb_handle_events() failed: %s\n", libusb_error_name(rc));
+ }
+
+ if (handle) {
+ libusb_close (handle);
+ }
+
+ libusb_exit (NULL);
+
+ return EXIT_SUCCESS;
+}
--- /dev/null
+/*
+ * libusb example program to list devices on the bus
+ * Copyright © 2007 Daniel Drake <dsd@gentoo.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdio.h>
+
+#include "libusb.h"
+
+static void print_devs(libusb_device **devs)
+{
+ libusb_device *dev;
+ int i = 0, j = 0;
+ uint8_t path[8];
+
+ while ((dev = devs[i++]) != NULL) {
+ struct libusb_device_descriptor desc;
+ int r = libusb_get_device_descriptor(dev, &desc);
+ if (r < 0) {
+ fprintf(stderr, "failed to get device descriptor");
+ return;
+ }
+
+ printf("%04x:%04x (bus %d, device %d)",
+ desc.idVendor, desc.idProduct,
+ libusb_get_bus_number(dev), libusb_get_device_address(dev));
+
+ r = libusb_get_port_numbers(dev, path, sizeof(path));
+ if (r > 0) {
+ printf(" path: %d", path[0]);
+ for (j = 1; j < r; j++)
+ printf(".%d", path[j]);
+ }
+ printf("\n");
+ }
+}
+
+int main(void)
+{
+ libusb_device **devs;
+ int r;
+ ssize_t cnt;
+
+ r = libusb_init(NULL);
+ if (r < 0)
+ return r;
+
+ cnt = libusb_get_device_list(NULL, &devs);
+ if (cnt < 0)
+ return (int) cnt;
+
+ print_devs(devs);
+ libusb_free_device_list(devs, 1);
+
+ libusb_exit(NULL);
+ return 0;
+}
--- /dev/null
+/*
+ * libusb example program to measure Atmel SAM3U isochronous performance
+ * Copyright (C) 2012 Harald Welte <laforge@gnumonks.org>
+ *
+ * Copied with the author's permission under LGPL-2.1 from
+ * http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=sam3u-tests.git;a=blob;f=usb-benchmark-project/host/benchmark.c;h=74959f7ee88f1597286cd435f312a8ff52c56b7e
+ *
+ * An Atmel SAM3U test firmware is also available in the above repository.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <signal.h>
+
+#include <libusb.h>
+
+
+#define EP_DATA_IN 0x82
+#define EP_ISO_IN 0x86
+
+static int do_exit = 0;
+static struct libusb_device_handle *devh = NULL;
+
+static unsigned long num_bytes = 0, num_xfer = 0;
+static struct timeval tv_start;
+
+static void LIBUSB_CALL cb_xfr(struct libusb_transfer *xfr)
+{
+ unsigned int i;
+
+ if (xfr->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "transfer status %d\n", xfr->status);
+ libusb_free_transfer(xfr);
+ exit(3);
+ }
+
+ if (xfr->type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS) {
+ for (i = 0; i < xfr->num_iso_packets; i++) {
+ struct libusb_iso_packet_descriptor *pack = &xfr->iso_packet_desc[i];
+
+ if (pack->status != LIBUSB_TRANSFER_COMPLETED) {
+ fprintf(stderr, "Error: pack %u status %d\n", i, pack->status);
+ exit(5);
+ }
+
+ printf("pack%u length:%u, actual_length:%u\n", i, pack->length, pack->actual_length);
+ }
+ }
+
+ printf("length:%u, actual_length:%u\n", xfr->length, xfr->actual_length);
+ for (i = 0; i < xfr->actual_length; i++) {
+ printf("%02x", xfr->buffer[i]);
+ if (i % 16)
+ printf("\n");
+ else if (i % 8)
+ printf(" ");
+ else
+ printf(" ");
+ }
+ num_bytes += xfr->actual_length;
+ num_xfer++;
+
+ if (libusb_submit_transfer(xfr) < 0) {
+ fprintf(stderr, "error re-submitting URB\n");
+ exit(1);
+ }
+}
+
+static int benchmark_in(uint8_t ep)
+{
+ static uint8_t buf[2048];
+ static struct libusb_transfer *xfr;
+ int num_iso_pack = 0;
+
+ if (ep == EP_ISO_IN)
+ num_iso_pack = 16;
+
+ xfr = libusb_alloc_transfer(num_iso_pack);
+ if (!xfr)
+ return -ENOMEM;
+
+ if (ep == EP_ISO_IN) {
+ libusb_fill_iso_transfer(xfr, devh, ep, buf,
+ sizeof(buf), num_iso_pack, cb_xfr, NULL, 0);
+ libusb_set_iso_packet_lengths(xfr, sizeof(buf)/num_iso_pack);
+ } else
+ libusb_fill_bulk_transfer(xfr, devh, ep, buf,
+ sizeof(buf), cb_xfr, NULL, 0);
+
+ gettimeofday(&tv_start, NULL);
+
+ /* NOTE: To reach maximum possible performance the program must
+ * submit *multiple* transfers here, not just one.
+ *
+ * When only one transfer is submitted there is a gap in the bus
+ * schedule from when the transfer completes until a new transfer
+ * is submitted by the callback. This causes some jitter for
+ * isochronous transfers and loss of throughput for bulk transfers.
+ *
+ * This is avoided by queueing multiple transfers in advance, so
+ * that the host controller is always kept busy, and will schedule
+ * more transfers on the bus while the callback is running for
+ * transfers which have completed on the bus.
+ */
+
+ return libusb_submit_transfer(xfr);
+}
+
+static void measure(void)
+{
+ struct timeval tv_stop;
+ unsigned int diff_msec;
+
+ gettimeofday(&tv_stop, NULL);
+
+ diff_msec = (tv_stop.tv_sec - tv_start.tv_sec)*1000;
+ diff_msec += (tv_stop.tv_usec - tv_start.tv_usec)/1000;
+
+ printf("%lu transfers (total %lu bytes) in %u miliseconds => %lu bytes/sec\n",
+ num_xfer, num_bytes, diff_msec, (num_bytes*1000)/diff_msec);
+}
+
+static void sig_hdlr(int signum)
+{
+ switch (signum) {
+ case SIGINT:
+ measure();
+ do_exit = 1;
+ break;
+ }
+}
+
+int main(int argc, char **argv)
+{
+ int rc;
+ struct sigaction sigact;
+
+ sigact.sa_handler = sig_hdlr;
+ sigemptyset(&sigact.sa_mask);
+ sigact.sa_flags = 0;
+ sigaction(SIGINT, &sigact, NULL);
+
+ rc = libusb_init(NULL);
+ if (rc < 0) {
+ fprintf(stderr, "Error initializing libusb: %s\n", libusb_error_name(rc));
+ exit(1);
+ }
+
+ devh = libusb_open_device_with_vid_pid(NULL, 0x16c0, 0x0763);
+ if (!devh) {
+ fprintf(stderr, "Error finding USB device\n");
+ goto out;
+ }
+
+ rc = libusb_claim_interface(devh, 2);
+ if (rc < 0) {
+ fprintf(stderr, "Error claiming interface: %s\n", libusb_error_name(rc));
+ goto out;
+ }
+
+ benchmark_in(EP_ISO_IN);
+
+ while (!do_exit) {
+ rc = libusb_handle_events(NULL);
+ if (rc != LIBUSB_SUCCESS)
+ break;
+ }
+
+ /* Measurement has already been done by the signal handler. */
+
+ libusb_release_interface(devh, 0);
+out:
+ if (devh)
+ libusb_close(devh);
+ libusb_exit(NULL);
+ return rc;
+}
--- /dev/null
+/*
+ * xusb: Generic USB test program
+ * Copyright © 2009-2012 Pete Batard <pete@akeo.ie>
+ * Contributions to Mass Storage by Alan Stern.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+
+#include "libusb.h"
+
+#if defined(_WIN32)
+#define msleep(msecs) Sleep(msecs)
+#else
+#include <unistd.h>
+#define msleep(msecs) usleep(1000*msecs)
+#endif
+
+#if defined(_MSC_VER)
+#define snprintf _snprintf
+#define putenv _putenv
+#endif
+
+#if !defined(bool)
+#define bool int
+#endif
+#if !defined(true)
+#define true (1 == 1)
+#endif
+#if !defined(false)
+#define false (!true)
+#endif
+
+// Future versions of libusb will use usb_interface instead of interface
+// in libusb_config_descriptor => catter for that
+#define usb_interface interface
+
+// Global variables
+static bool binary_dump = false;
+static bool extra_info = false;
+static bool force_device_request = false; // For WCID descriptor queries
+static const char* binary_name = NULL;
+
+static int perr(char const *format, ...)
+{
+ va_list args;
+ int r;
+
+ va_start (args, format);
+ r = vfprintf(stderr, format, args);
+ va_end(args);
+
+ return r;
+}
+
+#define ERR_EXIT(errcode) do { perr(" %s\n", libusb_strerror((enum libusb_error)errcode)); return -1; } while (0)
+#define CALL_CHECK(fcall) do { r=fcall; if (r < 0) ERR_EXIT(r); } while (0);
+#define B(x) (((x)!=0)?1:0)
+#define be_to_int32(buf) (((buf)[0]<<24)|((buf)[1]<<16)|((buf)[2]<<8)|(buf)[3])
+
+#define RETRY_MAX 5
+#define REQUEST_SENSE_LENGTH 0x12
+#define INQUIRY_LENGTH 0x24
+#define READ_CAPACITY_LENGTH 0x08
+
+// HID Class-Specific Requests values. See section 7.2 of the HID specifications
+#define HID_GET_REPORT 0x01
+#define HID_GET_IDLE 0x02
+#define HID_GET_PROTOCOL 0x03
+#define HID_SET_REPORT 0x09
+#define HID_SET_IDLE 0x0A
+#define HID_SET_PROTOCOL 0x0B
+#define HID_REPORT_TYPE_INPUT 0x01
+#define HID_REPORT_TYPE_OUTPUT 0x02
+#define HID_REPORT_TYPE_FEATURE 0x03
+
+// Mass Storage Requests values. See section 3 of the Bulk-Only Mass Storage Class specifications
+#define BOMS_RESET 0xFF
+#define BOMS_GET_MAX_LUN 0xFE
+
+// Section 5.1: Command Block Wrapper (CBW)
+struct command_block_wrapper {
+ uint8_t dCBWSignature[4];
+ uint32_t dCBWTag;
+ uint32_t dCBWDataTransferLength;
+ uint8_t bmCBWFlags;
+ uint8_t bCBWLUN;
+ uint8_t bCBWCBLength;
+ uint8_t CBWCB[16];
+};
+
+// Section 5.2: Command Status Wrapper (CSW)
+struct command_status_wrapper {
+ uint8_t dCSWSignature[4];
+ uint32_t dCSWTag;
+ uint32_t dCSWDataResidue;
+ uint8_t bCSWStatus;
+};
+
+static uint8_t cdb_length[256] = {
+// 0 1 2 3 4 5 6 7 8 9 A B C D E F
+ 06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06, // 0
+ 06,06,06,06,06,06,06,06,06,06,06,06,06,06,06,06, // 1
+ 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, // 2
+ 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, // 3
+ 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, // 4
+ 10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10, // 5
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // 6
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // 7
+ 16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16, // 8
+ 16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16, // 9
+ 12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12, // A
+ 12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12, // B
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // C
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // D
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // E
+ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, // F
+};
+
+static enum test_type {
+ USE_GENERIC,
+ USE_PS3,
+ USE_XBOX,
+ USE_SCSI,
+ USE_HID,
+} test_mode;
+static uint16_t VID, PID;
+
+static void display_buffer_hex(unsigned char *buffer, unsigned size)
+{
+ unsigned i, j, k;
+
+ for (i=0; i<size; i+=16) {
+ printf("\n %08x ", i);
+ for(j=0,k=0; k<16; j++,k++) {
+ if (i+j < size) {
+ printf("%02x", buffer[i+j]);
+ } else {
+ printf(" ");
+ }
+ printf(" ");
+ }
+ printf(" ");
+ for(j=0,k=0; k<16; j++,k++) {
+ if (i+j < size) {
+ if ((buffer[i+j] < 32) || (buffer[i+j] > 126)) {
+ printf(".");
+ } else {
+ printf("%c", buffer[i+j]);
+ }
+ }
+ }
+ }
+ printf("\n" );
+}
+
+static char* uuid_to_string(const uint8_t* uuid)
+{
+ static char uuid_string[40];
+ if (uuid == NULL) return NULL;
+ sprintf(uuid_string, "{%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x}",
+ uuid[0], uuid[1], uuid[2], uuid[3], uuid[4], uuid[5], uuid[6], uuid[7],
+ uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15]);
+ return uuid_string;
+}
+
+// The PS3 Controller is really a HID device that got its HID Report Descriptors
+// removed by Sony
+static int display_ps3_status(libusb_device_handle *handle)
+{
+ int r;
+ uint8_t input_report[49];
+ uint8_t master_bt_address[8];
+ uint8_t device_bt_address[18];
+
+ // Get the controller's bluetooth address of its master device
+ CALL_CHECK(libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, 0x03f5, 0, master_bt_address, sizeof(master_bt_address), 100));
+ printf("\nMaster's bluetooth address: %02X:%02X:%02X:%02X:%02X:%02X\n", master_bt_address[2], master_bt_address[3],
+ master_bt_address[4], master_bt_address[5], master_bt_address[6], master_bt_address[7]);
+
+ // Get the controller's bluetooth address
+ CALL_CHECK(libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, 0x03f2, 0, device_bt_address, sizeof(device_bt_address), 100));
+ printf("\nMaster's bluetooth address: %02X:%02X:%02X:%02X:%02X:%02X\n", device_bt_address[4], device_bt_address[5],
+ device_bt_address[6], device_bt_address[7], device_bt_address[8], device_bt_address[9]);
+
+ // Get the status of the controller's buttons via its HID report
+ printf("\nReading PS3 Input Report...\n");
+ CALL_CHECK(libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, (HID_REPORT_TYPE_INPUT<<8)|0x01, 0, input_report, sizeof(input_report), 1000));
+ switch(input_report[2]){ /** Direction pad plus start, select, and joystick buttons */
+ case 0x01:
+ printf("\tSELECT pressed\n");
+ break;
+ case 0x02:
+ printf("\tLEFT 3 pressed\n");
+ break;
+ case 0x04:
+ printf("\tRIGHT 3 pressed\n");
+ break;
+ case 0x08:
+ printf("\tSTART presed\n");
+ break;
+ case 0x10:
+ printf("\tUP pressed\n");
+ break;
+ case 0x20:
+ printf("\tRIGHT pressed\n");
+ break;
+ case 0x40:
+ printf("\tDOWN pressed\n");
+ break;
+ case 0x80:
+ printf("\tLEFT pressed\n");
+ break;
+ }
+ switch(input_report[3]){ /** Shapes plus top right and left buttons */
+ case 0x01:
+ printf("\tLEFT 2 pressed\n");
+ break;
+ case 0x02:
+ printf("\tRIGHT 2 pressed\n");
+ break;
+ case 0x04:
+ printf("\tLEFT 1 pressed\n");
+ break;
+ case 0x08:
+ printf("\tRIGHT 1 presed\n");
+ break;
+ case 0x10:
+ printf("\tTRIANGLE pressed\n");
+ break;
+ case 0x20:
+ printf("\tCIRCLE pressed\n");
+ break;
+ case 0x40:
+ printf("\tCROSS pressed\n");
+ break;
+ case 0x80:
+ printf("\tSQUARE pressed\n");
+ break;
+ }
+ printf("\tPS button: %d\n", input_report[4]);
+ printf("\tLeft Analog (X,Y): (%d,%d)\n", input_report[6], input_report[7]);
+ printf("\tRight Analog (X,Y): (%d,%d)\n", input_report[8], input_report[9]);
+ printf("\tL2 Value: %d\tR2 Value: %d\n", input_report[18], input_report[19]);
+ printf("\tL1 Value: %d\tR1 Value: %d\n", input_report[20], input_report[21]);
+ printf("\tRoll (x axis): %d Yaw (y axis): %d Pitch (z axis) %d\n",
+ //(((input_report[42] + 128) % 256) - 128),
+ (int8_t)(input_report[42]),
+ (int8_t)(input_report[44]),
+ (int8_t)(input_report[46]));
+ printf("\tAcceleration: %d\n\n", (int8_t)(input_report[48]));
+ return 0;
+}
+// The XBOX Controller is really a HID device that got its HID Report Descriptors
+// removed by Microsoft.
+// Input/Output reports described at http://euc.jp/periphs/xbox-controller.ja.html
+static int display_xbox_status(libusb_device_handle *handle)
+{
+ int r;
+ uint8_t input_report[20];
+ printf("\nReading XBox Input Report...\n");
+ CALL_CHECK(libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, (HID_REPORT_TYPE_INPUT<<8)|0x00, 0, input_report, 20, 1000));
+ printf(" D-pad: %02X\n", input_report[2]&0x0F);
+ printf(" Start:%d, Back:%d, Left Stick Press:%d, Right Stick Press:%d\n", B(input_report[2]&0x10), B(input_report[2]&0x20),
+ B(input_report[2]&0x40), B(input_report[2]&0x80));
+ // A, B, X, Y, Black, White are pressure sensitive
+ printf(" A:%d, B:%d, X:%d, Y:%d, White:%d, Black:%d\n", input_report[4], input_report[5],
+ input_report[6], input_report[7], input_report[9], input_report[8]);
+ printf(" Left Trigger: %d, Right Trigger: %d\n", input_report[10], input_report[11]);
+ printf(" Left Analog (X,Y): (%d,%d)\n", (int16_t)((input_report[13]<<8)|input_report[12]),
+ (int16_t)((input_report[15]<<8)|input_report[14]));
+ printf(" Right Analog (X,Y): (%d,%d)\n", (int16_t)((input_report[17]<<8)|input_report[16]),
+ (int16_t)((input_report[19]<<8)|input_report[18]));
+ return 0;
+}
+
+static int set_xbox_actuators(libusb_device_handle *handle, uint8_t left, uint8_t right)
+{
+ int r;
+ uint8_t output_report[6];
+
+ printf("\nWriting XBox Controller Output Report...\n");
+
+ memset(output_report, 0, sizeof(output_report));
+ output_report[1] = sizeof(output_report);
+ output_report[3] = left;
+ output_report[5] = right;
+
+ CALL_CHECK(libusb_control_transfer(handle, LIBUSB_ENDPOINT_OUT|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_SET_REPORT, (HID_REPORT_TYPE_OUTPUT<<8)|0x00, 0, output_report, 06, 1000));
+ return 0;
+}
+
+static int send_mass_storage_command(libusb_device_handle *handle, uint8_t endpoint, uint8_t lun,
+ uint8_t *cdb, uint8_t direction, int data_length, uint32_t *ret_tag)
+{
+ static uint32_t tag = 1;
+ uint8_t cdb_len;
+ int i, r, size;
+ struct command_block_wrapper cbw;
+
+ if (cdb == NULL) {
+ return -1;
+ }
+
+ if (endpoint & LIBUSB_ENDPOINT_IN) {
+ perr("send_mass_storage_command: cannot send command on IN endpoint\n");
+ return -1;
+ }
+
+ cdb_len = cdb_length[cdb[0]];
+ if ((cdb_len == 0) || (cdb_len > sizeof(cbw.CBWCB))) {
+ perr("send_mass_storage_command: don't know how to handle this command (%02X, length %d)\n",
+ cdb[0], cdb_len);
+ return -1;
+ }
+
+ memset(&cbw, 0, sizeof(cbw));
+ cbw.dCBWSignature[0] = 'U';
+ cbw.dCBWSignature[1] = 'S';
+ cbw.dCBWSignature[2] = 'B';
+ cbw.dCBWSignature[3] = 'C';
+ *ret_tag = tag;
+ cbw.dCBWTag = tag++;
+ cbw.dCBWDataTransferLength = data_length;
+ cbw.bmCBWFlags = direction;
+ cbw.bCBWLUN = lun;
+ // Subclass is 1 or 6 => cdb_len
+ cbw.bCBWCBLength = cdb_len;
+ memcpy(cbw.CBWCB, cdb, cdb_len);
+
+ i = 0;
+ do {
+ // The transfer length must always be exactly 31 bytes.
+ r = libusb_bulk_transfer(handle, endpoint, (unsigned char*)&cbw, 31, &size, 1000);
+ if (r == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint);
+ }
+ i++;
+ } while ((r == LIBUSB_ERROR_PIPE) && (i<RETRY_MAX));
+ if (r != LIBUSB_SUCCESS) {
+ perr(" send_mass_storage_command: %s\n", libusb_strerror((enum libusb_error)r));
+ return -1;
+ }
+
+ printf(" sent %d CDB bytes\n", cdb_len);
+ return 0;
+}
+
+static int get_mass_storage_status(libusb_device_handle *handle, uint8_t endpoint, uint32_t expected_tag)
+{
+ int i, r, size;
+ struct command_status_wrapper csw;
+
+ // The device is allowed to STALL this transfer. If it does, you have to
+ // clear the stall and try again.
+ i = 0;
+ do {
+ r = libusb_bulk_transfer(handle, endpoint, (unsigned char*)&csw, 13, &size, 1000);
+ if (r == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint);
+ }
+ i++;
+ } while ((r == LIBUSB_ERROR_PIPE) && (i<RETRY_MAX));
+ if (r != LIBUSB_SUCCESS) {
+ perr(" get_mass_storage_status: %s\n", libusb_strerror((enum libusb_error)r));
+ return -1;
+ }
+ if (size != 13) {
+ perr(" get_mass_storage_status: received %d bytes (expected 13)\n", size);
+ return -1;
+ }
+ if (csw.dCSWTag != expected_tag) {
+ perr(" get_mass_storage_status: mismatched tags (expected %08X, received %08X)\n",
+ expected_tag, csw.dCSWTag);
+ return -1;
+ }
+ // For this test, we ignore the dCSWSignature check for validity...
+ printf(" Mass Storage Status: %02X (%s)\n", csw.bCSWStatus, csw.bCSWStatus?"FAILED":"Success");
+ if (csw.dCSWTag != expected_tag)
+ return -1;
+ if (csw.bCSWStatus) {
+ // REQUEST SENSE is appropriate only if bCSWStatus is 1, meaning that the
+ // command failed somehow. Larger values (2 in particular) mean that
+ // the command couldn't be understood.
+ if (csw.bCSWStatus == 1)
+ return -2; // request Get Sense
+ else
+ return -1;
+ }
+
+ // In theory we also should check dCSWDataResidue. But lots of devices
+ // set it wrongly.
+ return 0;
+}
+
+static void get_sense(libusb_device_handle *handle, uint8_t endpoint_in, uint8_t endpoint_out)
+{
+ uint8_t cdb[16]; // SCSI Command Descriptor Block
+ uint8_t sense[18];
+ uint32_t expected_tag;
+ int size;
+ int rc;
+
+ // Request Sense
+ printf("Request Sense:\n");
+ memset(sense, 0, sizeof(sense));
+ memset(cdb, 0, sizeof(cdb));
+ cdb[0] = 0x03; // Request Sense
+ cdb[4] = REQUEST_SENSE_LENGTH;
+
+ send_mass_storage_command(handle, endpoint_out, 0, cdb, LIBUSB_ENDPOINT_IN, REQUEST_SENSE_LENGTH, &expected_tag);
+ rc = libusb_bulk_transfer(handle, endpoint_in, (unsigned char*)&sense, REQUEST_SENSE_LENGTH, &size, 1000);
+ if (rc < 0)
+ {
+ printf("libusb_bulk_transfer failed: %s\n", libusb_error_name(rc));
+ return;
+ }
+ printf(" received %d bytes\n", size);
+
+ if ((sense[0] != 0x70) && (sense[0] != 0x71)) {
+ perr(" ERROR No sense data\n");
+ } else {
+ perr(" ERROR Sense: %02X %02X %02X\n", sense[2]&0x0F, sense[12], sense[13]);
+ }
+ // Strictly speaking, the get_mass_storage_status() call should come
+ // before these perr() lines. If the status is nonzero then we must
+ // assume there's no data in the buffer. For xusb it doesn't matter.
+ get_mass_storage_status(handle, endpoint_in, expected_tag);
+}
+
+// Mass Storage device to test bulk transfers (non destructive test)
+static int test_mass_storage(libusb_device_handle *handle, uint8_t endpoint_in, uint8_t endpoint_out)
+{
+ int r, size;
+ uint8_t lun;
+ uint32_t expected_tag;
+ uint32_t i, max_lba, block_size;
+ double device_size;
+ uint8_t cdb[16]; // SCSI Command Descriptor Block
+ uint8_t buffer[64];
+ char vid[9], pid[9], rev[5];
+ unsigned char *data;
+ FILE *fd;
+
+ printf("Reading Max LUN:\n");
+ r = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ BOMS_GET_MAX_LUN, 0, 0, &lun, 1, 1000);
+ // Some devices send a STALL instead of the actual value.
+ // In such cases we should set lun to 0.
+ if (r == 0) {
+ lun = 0;
+ } else if (r < 0) {
+ perr(" Failed: %s", libusb_strerror((enum libusb_error)r));
+ }
+ printf(" Max LUN = %d\n", lun);
+
+ // Send Inquiry
+ printf("Sending Inquiry:\n");
+ memset(buffer, 0, sizeof(buffer));
+ memset(cdb, 0, sizeof(cdb));
+ cdb[0] = 0x12; // Inquiry
+ cdb[4] = INQUIRY_LENGTH;
+
+ send_mass_storage_command(handle, endpoint_out, lun, cdb, LIBUSB_ENDPOINT_IN, INQUIRY_LENGTH, &expected_tag);
+ CALL_CHECK(libusb_bulk_transfer(handle, endpoint_in, (unsigned char*)&buffer, INQUIRY_LENGTH, &size, 1000));
+ printf(" received %d bytes\n", size);
+ // The following strings are not zero terminated
+ for (i=0; i<8; i++) {
+ vid[i] = buffer[8+i];
+ pid[i] = buffer[16+i];
+ rev[i/2] = buffer[32+i/2]; // instead of another loop
+ }
+ vid[8] = 0;
+ pid[8] = 0;
+ rev[4] = 0;
+ printf(" VID:PID:REV \"%8s\":\"%8s\":\"%4s\"\n", vid, pid, rev);
+ if (get_mass_storage_status(handle, endpoint_in, expected_tag) == -2) {
+ get_sense(handle, endpoint_in, endpoint_out);
+ }
+
+ // Read capacity
+ printf("Reading Capacity:\n");
+ memset(buffer, 0, sizeof(buffer));
+ memset(cdb, 0, sizeof(cdb));
+ cdb[0] = 0x25; // Read Capacity
+
+ send_mass_storage_command(handle, endpoint_out, lun, cdb, LIBUSB_ENDPOINT_IN, READ_CAPACITY_LENGTH, &expected_tag);
+ CALL_CHECK(libusb_bulk_transfer(handle, endpoint_in, (unsigned char*)&buffer, READ_CAPACITY_LENGTH, &size, 1000));
+ printf(" received %d bytes\n", size);
+ max_lba = be_to_int32(&buffer[0]);
+ block_size = be_to_int32(&buffer[4]);
+ device_size = ((double)(max_lba+1))*block_size/(1024*1024*1024);
+ printf(" Max LBA: %08X, Block Size: %08X (%.2f GB)\n", max_lba, block_size, device_size);
+ if (get_mass_storage_status(handle, endpoint_in, expected_tag) == -2) {
+ get_sense(handle, endpoint_in, endpoint_out);
+ }
+
+ // coverity[tainted_data]
+ data = (unsigned char*) calloc(1, block_size);
+ if (data == NULL) {
+ perr(" unable to allocate data buffer\n");
+ return -1;
+ }
+
+ // Send Read
+ printf("Attempting to read %d bytes:\n", block_size);
+ memset(cdb, 0, sizeof(cdb));
+
+ cdb[0] = 0x28; // Read(10)
+ cdb[8] = 0x01; // 1 block
+
+ send_mass_storage_command(handle, endpoint_out, lun, cdb, LIBUSB_ENDPOINT_IN, block_size, &expected_tag);
+ libusb_bulk_transfer(handle, endpoint_in, data, block_size, &size, 5000);
+ printf(" READ: received %d bytes\n", size);
+ if (get_mass_storage_status(handle, endpoint_in, expected_tag) == -2) {
+ get_sense(handle, endpoint_in, endpoint_out);
+ } else {
+ display_buffer_hex(data, size);
+ if ((binary_dump) && ((fd = fopen(binary_name, "w")) != NULL)) {
+ if (fwrite(data, 1, (size_t)size, fd) != (unsigned int)size) {
+ perr(" unable to write binary data\n");
+ }
+ fclose(fd);
+ }
+ }
+ free(data);
+
+ return 0;
+}
+
+// HID
+static int get_hid_record_size(uint8_t *hid_report_descriptor, int size, int type)
+{
+ uint8_t i, j = 0;
+ uint8_t offset;
+ int record_size[3] = {0, 0, 0};
+ int nb_bits = 0, nb_items = 0;
+ bool found_record_marker;
+
+ found_record_marker = false;
+ for (i = hid_report_descriptor[0]+1; i < size; i += offset) {
+ offset = (hid_report_descriptor[i]&0x03) + 1;
+ if (offset == 4)
+ offset = 5;
+ switch (hid_report_descriptor[i] & 0xFC) {
+ case 0x74: // bitsize
+ nb_bits = hid_report_descriptor[i+1];
+ break;
+ case 0x94: // count
+ nb_items = 0;
+ for (j=1; j<offset; j++) {
+ nb_items = ((uint32_t)hid_report_descriptor[i+j]) << (8*(j-1));
+ }
+ break;
+ case 0x80: // input
+ found_record_marker = true;
+ j = 0;
+ break;
+ case 0x90: // output
+ found_record_marker = true;
+ j = 1;
+ break;
+ case 0xb0: // feature
+ found_record_marker = true;
+ j = 2;
+ break;
+ case 0xC0: // end of collection
+ nb_items = 0;
+ nb_bits = 0;
+ break;
+ default:
+ continue;
+ }
+ if (found_record_marker) {
+ found_record_marker = false;
+ record_size[j] += nb_items*nb_bits;
+ }
+ }
+ if ((type < HID_REPORT_TYPE_INPUT) || (type > HID_REPORT_TYPE_FEATURE)) {
+ return 0;
+ } else {
+ return (record_size[type - HID_REPORT_TYPE_INPUT]+7)/8;
+ }
+}
+
+static int test_hid(libusb_device_handle *handle, uint8_t endpoint_in)
+{
+ int r, size, descriptor_size;
+ uint8_t hid_report_descriptor[256];
+ uint8_t *report_buffer;
+ FILE *fd;
+
+ printf("\nReading HID Report Descriptors:\n");
+ descriptor_size = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_STANDARD|LIBUSB_RECIPIENT_INTERFACE,
+ LIBUSB_REQUEST_GET_DESCRIPTOR, LIBUSB_DT_REPORT<<8, 0, hid_report_descriptor, sizeof(hid_report_descriptor), 1000);
+ if (descriptor_size < 0) {
+ printf(" Failed\n");
+ return -1;
+ }
+ display_buffer_hex(hid_report_descriptor, descriptor_size);
+ if ((binary_dump) && ((fd = fopen(binary_name, "w")) != NULL)) {
+ if (fwrite(hid_report_descriptor, 1, descriptor_size, fd) != descriptor_size) {
+ printf(" Error writing descriptor to file\n");
+ }
+ fclose(fd);
+ }
+
+ size = get_hid_record_size(hid_report_descriptor, descriptor_size, HID_REPORT_TYPE_FEATURE);
+ if (size <= 0) {
+ printf("\nSkipping Feature Report readout (None detected)\n");
+ } else {
+ report_buffer = (uint8_t*) calloc(size, 1);
+ if (report_buffer == NULL) {
+ return -1;
+ }
+
+ printf("\nReading Feature Report (length %d)...\n", size);
+ r = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, (HID_REPORT_TYPE_FEATURE<<8)|0, 0, report_buffer, (uint16_t)size, 5000);
+ if (r >= 0) {
+ display_buffer_hex(report_buffer, size);
+ } else {
+ switch(r) {
+ case LIBUSB_ERROR_NOT_FOUND:
+ printf(" No Feature Report available for this device\n");
+ break;
+ case LIBUSB_ERROR_PIPE:
+ printf(" Detected stall - resetting pipe...\n");
+ libusb_clear_halt(handle, 0);
+ break;
+ default:
+ printf(" Error: %s\n", libusb_strerror((enum libusb_error)r));
+ break;
+ }
+ }
+ free(report_buffer);
+ }
+
+ size = get_hid_record_size(hid_report_descriptor, descriptor_size, HID_REPORT_TYPE_INPUT);
+ if (size <= 0) {
+ printf("\nSkipping Input Report readout (None detected)\n");
+ } else {
+ report_buffer = (uint8_t*) calloc(size, 1);
+ if (report_buffer == NULL) {
+ return -1;
+ }
+
+ printf("\nReading Input Report (length %d)...\n", size);
+ r = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE,
+ HID_GET_REPORT, (HID_REPORT_TYPE_INPUT<<8)|0x00, 0, report_buffer, (uint16_t)size, 5000);
+ if (r >= 0) {
+ display_buffer_hex(report_buffer, size);
+ } else {
+ switch(r) {
+ case LIBUSB_ERROR_TIMEOUT:
+ printf(" Timeout! Please make sure you act on the device within the 5 seconds allocated...\n");
+ break;
+ case LIBUSB_ERROR_PIPE:
+ printf(" Detected stall - resetting pipe...\n");
+ libusb_clear_halt(handle, 0);
+ break;
+ default:
+ printf(" Error: %s\n", libusb_strerror((enum libusb_error)r));
+ break;
+ }
+ }
+
+ // Attempt a bulk read from endpoint 0 (this should just return a raw input report)
+ printf("\nTesting interrupt read using endpoint %02X...\n", endpoint_in);
+ r = libusb_interrupt_transfer(handle, endpoint_in, report_buffer, size, &size, 5000);
+ if (r >= 0) {
+ display_buffer_hex(report_buffer, size);
+ } else {
+ printf(" %s\n", libusb_strerror((enum libusb_error)r));
+ }
+
+ free(report_buffer);
+ }
+ return 0;
+}
+
+// Read the MS WinUSB Feature Descriptors, that are used on Windows 8 for automated driver installation
+static void read_ms_winsub_feature_descriptors(libusb_device_handle *handle, uint8_t bRequest, int iface_number)
+{
+#define MAX_OS_FD_LENGTH 256
+ int i, r;
+ uint8_t os_desc[MAX_OS_FD_LENGTH];
+ uint32_t length;
+ void* le_type_punning_IS_fine;
+ struct {
+ const char* desc;
+ uint8_t recipient;
+ uint16_t index;
+ uint16_t header_size;
+ } os_fd[2] = {
+ {"Extended Compat ID", LIBUSB_RECIPIENT_DEVICE, 0x0004, 0x10},
+ {"Extended Properties", LIBUSB_RECIPIENT_INTERFACE, 0x0005, 0x0A}
+ };
+
+ if (iface_number < 0) return;
+ // WinUSB has a limitation that forces wIndex to the interface number when issuing
+ // an Interface Request. To work around that, we can force a Device Request for
+ // the Extended Properties, assuming the device answers both equally.
+ if (force_device_request)
+ os_fd[1].recipient = LIBUSB_RECIPIENT_DEVICE;
+
+ for (i=0; i<2; i++) {
+ printf("\nReading %s OS Feature Descriptor (wIndex = 0x%04d):\n", os_fd[i].desc, os_fd[i].index);
+
+ // Read the header part
+ r = libusb_control_transfer(handle, (uint8_t)(LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_VENDOR|os_fd[i].recipient),
+ bRequest, (uint16_t)(((iface_number)<< 8)|0x00), os_fd[i].index, os_desc, os_fd[i].header_size, 1000);
+ if (r < os_fd[i].header_size) {
+ perr(" Failed: %s", (r<0)?libusb_strerror((enum libusb_error)r):"header size is too small");
+ return;
+ }
+ le_type_punning_IS_fine = (void*)os_desc;
+ length = *((uint32_t*)le_type_punning_IS_fine);
+ if (length > MAX_OS_FD_LENGTH) {
+ length = MAX_OS_FD_LENGTH;
+ }
+
+ // Read the full feature descriptor
+ r = libusb_control_transfer(handle, (uint8_t)(LIBUSB_ENDPOINT_IN|LIBUSB_REQUEST_TYPE_VENDOR|os_fd[i].recipient),
+ bRequest, (uint16_t)(((iface_number)<< 8)|0x00), os_fd[i].index, os_desc, (uint16_t)length, 1000);
+ if (r < 0) {
+ perr(" Failed: %s", libusb_strerror((enum libusb_error)r));
+ return;
+ } else {
+ display_buffer_hex(os_desc, r);
+ }
+ }
+}
+
+static void print_device_cap(struct libusb_bos_dev_capability_descriptor *dev_cap)
+{
+ switch(dev_cap->bDevCapabilityType) {
+ case LIBUSB_BT_USB_2_0_EXTENSION: {
+ struct libusb_usb_2_0_extension_descriptor *usb_2_0_ext = NULL;
+ libusb_get_usb_2_0_extension_descriptor(NULL, dev_cap, &usb_2_0_ext);
+ if (usb_2_0_ext) {
+ printf(" USB 2.0 extension:\n");
+ printf(" attributes : %02X\n", usb_2_0_ext->bmAttributes);
+ libusb_free_usb_2_0_extension_descriptor(usb_2_0_ext);
+ }
+ break;
+ }
+ case LIBUSB_BT_SS_USB_DEVICE_CAPABILITY: {
+ struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap = NULL;
+ libusb_get_ss_usb_device_capability_descriptor(NULL, dev_cap, &ss_usb_device_cap);
+ if (ss_usb_device_cap) {
+ printf(" USB 3.0 capabilities:\n");
+ printf(" attributes : %02X\n", ss_usb_device_cap->bmAttributes);
+ printf(" supported speeds : %04X\n", ss_usb_device_cap->wSpeedSupported);
+ printf(" supported functionality: %02X\n", ss_usb_device_cap->bFunctionalitySupport);
+ libusb_free_ss_usb_device_capability_descriptor(ss_usb_device_cap);
+ }
+ break;
+ }
+ case LIBUSB_BT_CONTAINER_ID: {
+ struct libusb_container_id_descriptor *container_id = NULL;
+ libusb_get_container_id_descriptor(NULL, dev_cap, &container_id);
+ if (container_id) {
+ printf(" Container ID:\n %s\n", uuid_to_string(container_id->ContainerID));
+ libusb_free_container_id_descriptor(container_id);
+ }
+ break;
+ }
+ default:
+ printf(" Unknown BOS device capability %02x:\n", dev_cap->bDevCapabilityType);
+ }
+}
+
+static int test_device(uint16_t vid, uint16_t pid)
+{
+ libusb_device_handle *handle;
+ libusb_device *dev;
+ uint8_t bus, port_path[8];
+ struct libusb_bos_descriptor *bos_desc;
+ struct libusb_config_descriptor *conf_desc;
+ const struct libusb_endpoint_descriptor *endpoint;
+ int i, j, k, r;
+ int iface, nb_ifaces, first_iface = -1;
+ struct libusb_device_descriptor dev_desc;
+ const char* speed_name[5] = { "Unknown", "1.5 Mbit/s (USB LowSpeed)", "12 Mbit/s (USB FullSpeed)",
+ "480 Mbit/s (USB HighSpeed)", "5000 Mbit/s (USB SuperSpeed)"};
+ char string[128];
+ uint8_t string_index[3]; // indexes of the string descriptors
+ uint8_t endpoint_in = 0, endpoint_out = 0; // default IN and OUT endpoints
+
+ printf("Opening device %04X:%04X...\n", vid, pid);
+ handle = libusb_open_device_with_vid_pid(NULL, vid, pid);
+
+ if (handle == NULL) {
+ perr(" Failed.\n");
+ return -1;
+ }
+
+ dev = libusb_get_device(handle);
+ bus = libusb_get_bus_number(dev);
+ if (extra_info) {
+ r = libusb_get_port_numbers(dev, port_path, sizeof(port_path));
+ if (r > 0) {
+ printf("\nDevice properties:\n");
+ printf(" bus number: %d\n", bus);
+ printf(" port path: %d", port_path[0]);
+ for (i=1; i<r; i++) {
+ printf("->%d", port_path[i]);
+ }
+ printf(" (from root hub)\n");
+ }
+ r = libusb_get_device_speed(dev);
+ if ((r<0) || (r>4)) r=0;
+ printf(" speed: %s\n", speed_name[r]);
+ }
+
+ printf("\nReading device descriptor:\n");
+ CALL_CHECK(libusb_get_device_descriptor(dev, &dev_desc));
+ printf(" length: %d\n", dev_desc.bLength);
+ printf(" device class: %d\n", dev_desc.bDeviceClass);
+ printf(" S/N: %d\n", dev_desc.iSerialNumber);
+ printf(" VID:PID: %04X:%04X\n", dev_desc.idVendor, dev_desc.idProduct);
+ printf(" bcdDevice: %04X\n", dev_desc.bcdDevice);
+ printf(" iMan:iProd:iSer: %d:%d:%d\n", dev_desc.iManufacturer, dev_desc.iProduct, dev_desc.iSerialNumber);
+ printf(" nb confs: %d\n", dev_desc.bNumConfigurations);
+ // Copy the string descriptors for easier parsing
+ string_index[0] = dev_desc.iManufacturer;
+ string_index[1] = dev_desc.iProduct;
+ string_index[2] = dev_desc.iSerialNumber;
+
+ printf("\nReading BOS descriptor: ");
+ if (libusb_get_bos_descriptor(handle, &bos_desc) == LIBUSB_SUCCESS) {
+ printf("%d caps\n", bos_desc->bNumDeviceCaps);
+ for (i = 0; i < bos_desc->bNumDeviceCaps; i++)
+ print_device_cap(bos_desc->dev_capability[i]);
+ libusb_free_bos_descriptor(bos_desc);
+ } else {
+ printf("no descriptor\n");
+ }
+
+ printf("\nReading first configuration descriptor:\n");
+ CALL_CHECK(libusb_get_config_descriptor(dev, 0, &conf_desc));
+ nb_ifaces = conf_desc->bNumInterfaces;
+ printf(" nb interfaces: %d\n", nb_ifaces);
+ if (nb_ifaces > 0)
+ first_iface = conf_desc->usb_interface[0].altsetting[0].bInterfaceNumber;
+ for (i=0; i<nb_ifaces; i++) {
+ printf(" interface[%d]: id = %d\n", i,
+ conf_desc->usb_interface[i].altsetting[0].bInterfaceNumber);
+ for (j=0; j<conf_desc->usb_interface[i].num_altsetting; j++) {
+ printf("interface[%d].altsetting[%d]: num endpoints = %d\n",
+ i, j, conf_desc->usb_interface[i].altsetting[j].bNumEndpoints);
+ printf(" Class.SubClass.Protocol: %02X.%02X.%02X\n",
+ conf_desc->usb_interface[i].altsetting[j].bInterfaceClass,
+ conf_desc->usb_interface[i].altsetting[j].bInterfaceSubClass,
+ conf_desc->usb_interface[i].altsetting[j].bInterfaceProtocol);
+ if ( (conf_desc->usb_interface[i].altsetting[j].bInterfaceClass == LIBUSB_CLASS_MASS_STORAGE)
+ && ( (conf_desc->usb_interface[i].altsetting[j].bInterfaceSubClass == 0x01)
+ || (conf_desc->usb_interface[i].altsetting[j].bInterfaceSubClass == 0x06) )
+ && (conf_desc->usb_interface[i].altsetting[j].bInterfaceProtocol == 0x50) ) {
+ // Mass storage devices that can use basic SCSI commands
+ test_mode = USE_SCSI;
+ }
+ for (k=0; k<conf_desc->usb_interface[i].altsetting[j].bNumEndpoints; k++) {
+ struct libusb_ss_endpoint_companion_descriptor *ep_comp = NULL;
+ endpoint = &conf_desc->usb_interface[i].altsetting[j].endpoint[k];
+ printf(" endpoint[%d].address: %02X\n", k, endpoint->bEndpointAddress);
+ // Use the first interrupt or bulk IN/OUT endpoints as default for testing
+ if ((endpoint->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) & (LIBUSB_TRANSFER_TYPE_BULK | LIBUSB_TRANSFER_TYPE_INTERRUPT)) {
+ if (endpoint->bEndpointAddress & LIBUSB_ENDPOINT_IN) {
+ if (!endpoint_in)
+ endpoint_in = endpoint->bEndpointAddress;
+ } else {
+ if (!endpoint_out)
+ endpoint_out = endpoint->bEndpointAddress;
+ }
+ }
+ printf(" max packet size: %04X\n", endpoint->wMaxPacketSize);
+ printf(" polling interval: %02X\n", endpoint->bInterval);
+ libusb_get_ss_endpoint_companion_descriptor(NULL, endpoint, &ep_comp);
+ if (ep_comp) {
+ printf(" max burst: %02X (USB 3.0)\n", ep_comp->bMaxBurst);
+ printf(" bytes per interval: %04X (USB 3.0)\n", ep_comp->wBytesPerInterval);
+ libusb_free_ss_endpoint_companion_descriptor(ep_comp);
+ }
+ }
+ }
+ }
+ libusb_free_config_descriptor(conf_desc);
+
+ libusb_set_auto_detach_kernel_driver(handle, 1);
+ for (iface = 0; iface < nb_ifaces; iface++)
+ {
+ printf("\nClaiming interface %d...\n", iface);
+ r = libusb_claim_interface(handle, iface);
+ if (r != LIBUSB_SUCCESS) {
+ perr(" Failed.\n");
+ }
+ }
+
+ printf("\nReading string descriptors:\n");
+ for (i=0; i<3; i++) {
+ if (string_index[i] == 0) {
+ continue;
+ }
+ if (libusb_get_string_descriptor_ascii(handle, string_index[i], (unsigned char*)string, 128) >= 0) {
+ printf(" String (0x%02X): \"%s\"\n", string_index[i], string);
+ }
+ }
+ // Read the OS String Descriptor
+ if (libusb_get_string_descriptor_ascii(handle, 0xEE, (unsigned char*)string, 128) >= 0) {
+ printf(" String (0x%02X): \"%s\"\n", 0xEE, string);
+ // If this is a Microsoft OS String Descriptor,
+ // attempt to read the WinUSB extended Feature Descriptors
+ if (strncmp(string, "MSFT100", 7) == 0)
+ read_ms_winsub_feature_descriptors(handle, string[7], first_iface);
+ }
+
+ switch(test_mode) {
+ case USE_PS3:
+ CALL_CHECK(display_ps3_status(handle));
+ break;
+ case USE_XBOX:
+ CALL_CHECK(display_xbox_status(handle));
+ CALL_CHECK(set_xbox_actuators(handle, 128, 222));
+ msleep(2000);
+ CALL_CHECK(set_xbox_actuators(handle, 0, 0));
+ break;
+ case USE_HID:
+ test_hid(handle, endpoint_in);
+ break;
+ case USE_SCSI:
+ CALL_CHECK(test_mass_storage(handle, endpoint_in, endpoint_out));
+ case USE_GENERIC:
+ break;
+ }
+
+ printf("\n");
+ for (iface = 0; iface<nb_ifaces; iface++) {
+ printf("Releasing interface %d...\n", iface);
+ libusb_release_interface(handle, iface);
+ }
+
+ printf("Closing device...\n");
+ libusb_close(handle);
+
+ return 0;
+}
+
+int main(int argc, char** argv)
+{
+ bool show_help = false;
+ bool debug_mode = false;
+ const struct libusb_version* version;
+ int j, r;
+ size_t i, arglen;
+ unsigned tmp_vid, tmp_pid;
+ uint16_t endian_test = 0xBE00;
+ char *error_lang = NULL, *old_dbg_str = NULL, str[256];
+
+ // Default to generic, expecting VID:PID
+ VID = 0;
+ PID = 0;
+ test_mode = USE_GENERIC;
+
+ if (((uint8_t*)&endian_test)[0] == 0xBE) {
+ printf("Despite their natural superiority for end users, big endian\n"
+ "CPUs are not supported with this program, sorry.\n");
+ return 0;
+ }
+
+ if (argc >= 2) {
+ for (j = 1; j<argc; j++) {
+ arglen = strlen(argv[j]);
+ if ( ((argv[j][0] == '-') || (argv[j][0] == '/'))
+ && (arglen >= 2) ) {
+ switch(argv[j][1]) {
+ case 'd':
+ debug_mode = true;
+ break;
+ case 'i':
+ extra_info = true;
+ break;
+ case 'w':
+ force_device_request = true;
+ break;
+ case 'b':
+ if ((j+1 >= argc) || (argv[j+1][0] == '-') || (argv[j+1][0] == '/')) {
+ printf(" Option -b requires a file name\n");
+ return 1;
+ }
+ binary_name = argv[++j];
+ binary_dump = true;
+ break;
+ case 'l':
+ if ((j+1 >= argc) || (argv[j+1][0] == '-') || (argv[j+1][0] == '/')) {
+ printf(" Option -l requires an ISO 639-1 language parameter\n");
+ return 1;
+ }
+ error_lang = argv[++j];
+ break;
+ case 'j':
+ // OLIMEX ARM-USB-TINY JTAG, 2 channel composite device - 2 interfaces
+ if (!VID && !PID) {
+ VID = 0x15BA;
+ PID = 0x0004;
+ }
+ break;
+ case 'k':
+ // Generic 2 GB USB Key (SCSI Transparent/Bulk Only) - 1 interface
+ if (!VID && !PID) {
+ VID = 0x0204;
+ PID = 0x6025;
+ }
+ break;
+ // The following tests will force VID:PID if already provided
+ case 'p':
+ // Sony PS3 Controller - 1 interface
+ VID = 0x054C;
+ PID = 0x0268;
+ test_mode = USE_PS3;
+ break;
+ case 's':
+ // Microsoft Sidewinder Precision Pro Joystick - 1 HID interface
+ VID = 0x045E;
+ PID = 0x0008;
+ test_mode = USE_HID;
+ break;
+ case 'x':
+ // Microsoft XBox Controller Type S - 1 interface
+ VID = 0x045E;
+ PID = 0x0289;
+ test_mode = USE_XBOX;
+ break;
+ default:
+ show_help = true;
+ break;
+ }
+ } else {
+ for (i=0; i<arglen; i++) {
+ if (argv[j][i] == ':')
+ break;
+ }
+ if (i != arglen) {
+ if (sscanf(argv[j], "%x:%x" , &tmp_vid, &tmp_pid) != 2) {
+ printf(" Please specify VID & PID as \"vid:pid\" in hexadecimal format\n");
+ return 1;
+ }
+ VID = (uint16_t)tmp_vid;
+ PID = (uint16_t)tmp_pid;
+ } else {
+ show_help = true;
+ }
+ }
+ }
+ }
+
+ if ((show_help) || (argc == 1) || (argc > 7)) {
+ printf("usage: %s [-h] [-d] [-i] [-k] [-b file] [-l lang] [-j] [-x] [-s] [-p] [-w] [vid:pid]\n", argv[0]);
+ printf(" -h : display usage\n");
+ printf(" -d : enable debug output\n");
+ printf(" -i : print topology and speed info\n");
+ printf(" -j : test composite FTDI based JTAG device\n");
+ printf(" -k : test Mass Storage device\n");
+ printf(" -b file : dump Mass Storage data to file 'file'\n");
+ printf(" -p : test Sony PS3 SixAxis controller\n");
+ printf(" -s : test Microsoft Sidewinder Precision Pro (HID)\n");
+ printf(" -x : test Microsoft XBox Controller Type S\n");
+ printf(" -l lang : language to report errors in (ISO 639-1)\n");
+ printf(" -w : force the use of device requests when querying WCID descriptors\n");
+ printf("If only the vid:pid is provided, xusb attempts to run the most appropriate test\n");
+ return 0;
+ }
+
+ // xusb is commonly used as a debug tool, so it's convenient to have debug output during libusb_init(),
+ // but since we can't call on libusb_set_debug() before libusb_init(), we use the env variable method
+ old_dbg_str = getenv("LIBUSB_DEBUG");
+ if (debug_mode) {
+ if (putenv("LIBUSB_DEBUG=4") != 0) // LIBUSB_LOG_LEVEL_DEBUG
+ printf("Unable to set debug level");
+ }
+
+ version = libusb_get_version();
+ printf("Using libusb v%d.%d.%d.%d\n\n", version->major, version->minor, version->micro, version->nano);
+ r = libusb_init(NULL);
+ if (r < 0)
+ return r;
+
+ // If not set externally, and no debug option was given, use info log level
+ if ((old_dbg_str == NULL) && (!debug_mode))
+ libusb_set_debug(NULL, LIBUSB_LOG_LEVEL_INFO);
+ if (error_lang != NULL) {
+ r = libusb_setlocale(error_lang);
+ if (r < 0)
+ printf("Invalid or unsupported locale '%s': %s\n", error_lang, libusb_strerror((enum libusb_error)r));
+ }
+
+ test_device(VID, PID);
+
+ libusb_exit(NULL);
+
+ if (debug_mode) {
+ snprintf(str, sizeof(str), "LIBUSB_DEBUG=%s", (old_dbg_str == NULL)?"":old_dbg_str);
+ str[sizeof(str) - 1] = 0; // Windows may not NUL terminate the string
+ }
+
+ return 0;
+}
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2013-12-25.23; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab=' '
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) is_target_a_directory=never;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call 'install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for 'test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ dstdir=`dirname "$dst"`
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ set -f
+ set fnord $dstdir
+ shift
+ set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ set +f &&
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: libusb-1.0
+Description: C API for USB device access from Linux, Mac OS X, Windows and OpenBSD/NetBSD userspace
+Version: @VERSION@
+Libs: -L${libdir} -lusb-1.0
+Libs.private: @LIBS@
+Cflags: -I${includedir}/libusb-1.0
--- /dev/null
+all: libusb-1.0.la libusb-1.0.dll
+
+AUTOMAKE_OPTIONS = subdir-objects
+
+lib_LTLIBRARIES = libusb-1.0.la
+
+POSIX_POLL_SRC = os/poll_posix.c
+LINUX_USBFS_SRC = os/linux_usbfs.c
+DARWIN_USB_SRC = os/darwin_usb.c
+OPENBSD_USB_SRC = os/openbsd_usb.c
+NETBSD_USB_SRC = os/netbsd_usb.c
+WINDOWS_USB_SRC = os/poll_windows.c os/windows_usb.c libusb-1.0.rc libusb-1.0.def
+WINCE_USB_SRC = os/wince_usb.c os/wince_usb.h
+
+DIST_SUBDIRS =
+
+EXTRA_DIST = $(LINUX_USBFS_SRC) $(DARWIN_USB_SRC) $(OPENBSD_USB_SRC) \
+ $(NETBSD_USB_SRC) $(WINDOWS_USB_SRC) $(WINCE_USB_SRC) \
+ $(POSIX_POLL_SRC) \
+ os/threads_posix.c os/threads_windows.c \
+ os/linux_udev.c os/linux_netlink.c
+
+dist-hook:
+ cp -r os/haiku $(distdir)/os/haiku
+ rm -rf $(distdir)/os/haiku/autom4te.cache
+
+if OS_LINUX
+
+if USE_UDEV
+OS_SRC = $(LINUX_USBFS_SRC) $(POSIX_POLL_SRC) \
+ os/linux_udev.c
+else
+OS_SRC = $(LINUX_USBFS_SRC) $(POSIX_POLL_SRC) \
+ os/linux_netlink.c
+endif
+
+endif
+
+if OS_DARWIN
+OS_SRC = $(DARWIN_USB_SRC) $(POSIX_POLL_SRC)
+AM_CFLAGS_EXT = -no-cpp-precomp
+endif
+
+if OS_OPENBSD
+OS_SRC = $(OPENBSD_USB_SRC) $(POSIX_POLL_SRC)
+endif
+
+if OS_NETBSD
+OS_SRC = $(NETBSD_USB_SRC) $(POSIX_POLL_SRC)
+endif
+
+if OS_HAIKU
+OS_SRC = $(POSIX_POLL_SRC)
+SUBDIRS = os/haiku
+endif
+
+if OS_WINDOWS
+OS_SRC = $(WINDOWS_USB_SRC)
+
+.rc.lo:
+ $(AM_V_GEN)$(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --tag=RC --mode=compile $(RC) $(RCFLAGS) -i $< -o $@
+
+libusb-1.0.rc: version.h version_nano.h
+endif
+
+libusb-1.0.dll: libusb-1.0.def libusb-1.0.la
+if CREATE_IMPORT_LIB
+# Rebuild the import lib from the .def so that MS and MinGW DLLs can be interchanged
+ $(AM_V_GEN)$(DLLTOOL) $(DLLTOOLFLAGS) --kill-at --input-def $(srcdir)/libusb-1.0.def --dllname $@ --output-lib .libs/$@.a
+endif
+
+if THREADS_POSIX
+THREADS_SRC = os/threads_posix.h os/threads_posix.c
+else
+THREADS_SRC = os/threads_windows.h os/threads_windows.c
+endif
+
+libusb_1_0_la_CFLAGS = $(AM_CFLAGS)
+libusb_1_0_la_LDFLAGS = $(LTLDFLAGS)
+libusb_1_0_la_SOURCES = libusbi.h core.c descriptor.c io.c strerror.c sync.c \
+ os/linux_usbfs.h os/darwin_usb.h os/windows_usb.h os/windows_common.h \
+ hotplug.h hotplug.c $(THREADS_SRC) $(OS_SRC) \
+ os/poll_posix.h os/poll_windows.h
+
+if OS_HAIKU
+libusb_1_0_la_LIBADD = os/haiku/libhaikuusb.la
+endif
+
+hdrdir = $(includedir)/libusb-1.0
+hdr_HEADERS = libusb.h
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = libusb
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/libusb/version.h $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(hdr_HEADERS) $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(hdrdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+@OS_HAIKU_TRUE@libusb_1_0_la_DEPENDENCIES = os/haiku/libhaikuusb.la
+am__libusb_1_0_la_SOURCES_DIST = libusbi.h core.c descriptor.c io.c \
+ strerror.c sync.c os/linux_usbfs.h os/darwin_usb.h \
+ os/windows_usb.h os/windows_common.h hotplug.h hotplug.c \
+ os/threads_windows.h os/threads_windows.c os/threads_posix.h \
+ os/threads_posix.c os/darwin_usb.c os/poll_posix.c \
+ os/linux_usbfs.c os/linux_netlink.c os/linux_udev.c \
+ os/netbsd_usb.c os/openbsd_usb.c os/poll_windows.c \
+ os/windows_usb.c libusb-1.0.rc libusb-1.0.def os/poll_posix.h \
+ os/poll_windows.h
+am__dirstamp = $(am__leading_dot)dirstamp
+@THREADS_POSIX_FALSE@am__objects_1 = \
+@THREADS_POSIX_FALSE@ os/libusb_1_0_la-threads_windows.lo
+@THREADS_POSIX_TRUE@am__objects_1 = os/libusb_1_0_la-threads_posix.lo
+am__objects_2 = os/libusb_1_0_la-darwin_usb.lo
+am__objects_3 = os/libusb_1_0_la-poll_posix.lo
+am__objects_4 = os/libusb_1_0_la-linux_usbfs.lo
+am__objects_5 = os/libusb_1_0_la-netbsd_usb.lo
+am__objects_6 = os/libusb_1_0_la-openbsd_usb.lo
+am__objects_7 = os/libusb_1_0_la-poll_windows.lo \
+ os/libusb_1_0_la-windows_usb.lo libusb-1.0.lo
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_FALSE@@OS_NETBSD_FALSE@@OS_OPENBSD_FALSE@@OS_WINDOWS_TRUE@am__objects_8 = $(am__objects_7)
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_FALSE@@OS_NETBSD_FALSE@@OS_OPENBSD_TRUE@am__objects_8 = $(am__objects_6) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_FALSE@@OS_NETBSD_FALSE@@OS_OPENBSD_TRUE@ $(am__objects_3)
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_FALSE@@OS_NETBSD_TRUE@am__objects_8 = $(am__objects_5) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_FALSE@@OS_NETBSD_TRUE@ $(am__objects_3)
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_FALSE@am__objects_8 = $(am__objects_4) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_FALSE@ $(am__objects_3) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_FALSE@ os/libusb_1_0_la-linux_netlink.lo
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_TRUE@am__objects_8 = $(am__objects_4) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_TRUE@ $(am__objects_3) \
+@OS_DARWIN_FALSE@@OS_HAIKU_FALSE@@OS_LINUX_TRUE@@USE_UDEV_TRUE@ os/libusb_1_0_la-linux_udev.lo
+@OS_DARWIN_FALSE@@OS_HAIKU_TRUE@am__objects_8 = $(am__objects_3)
+@OS_DARWIN_TRUE@am__objects_8 = $(am__objects_2) $(am__objects_3)
+am_libusb_1_0_la_OBJECTS = libusb_1_0_la-core.lo \
+ libusb_1_0_la-descriptor.lo libusb_1_0_la-io.lo \
+ libusb_1_0_la-strerror.lo libusb_1_0_la-sync.lo \
+ libusb_1_0_la-hotplug.lo $(am__objects_1) $(am__objects_8)
+libusb_1_0_la_OBJECTS = $(am_libusb_1_0_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+libusb_1_0_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(libusb_1_0_la_CFLAGS) \
+ $(CFLAGS) $(libusb_1_0_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(libusb_1_0_la_SOURCES)
+DIST_SOURCES = $(am__libusb_1_0_la_SOURCES_DIST)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+HEADERS = $(hdr_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLDFLAGS = @LTLDFLAGS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OS_DARWIN = @OS_DARWIN@
+OS_HAIKU = @OS_HAIKU@
+OS_LINUX = @OS_LINUX@
+OS_NETBSD = @OS_NETBSD@
+OS_OPENBSD = @OS_OPENBSD@
+OS_WINDOWS = @OS_WINDOWS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_UDEV = @USE_UDEV@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = subdir-objects
+lib_LTLIBRARIES = libusb-1.0.la
+POSIX_POLL_SRC = os/poll_posix.c
+LINUX_USBFS_SRC = os/linux_usbfs.c
+DARWIN_USB_SRC = os/darwin_usb.c
+OPENBSD_USB_SRC = os/openbsd_usb.c
+NETBSD_USB_SRC = os/netbsd_usb.c
+WINDOWS_USB_SRC = os/poll_windows.c os/windows_usb.c libusb-1.0.rc libusb-1.0.def
+WINCE_USB_SRC = os/wince_usb.c os/wince_usb.h
+DIST_SUBDIRS =
+EXTRA_DIST = $(LINUX_USBFS_SRC) $(DARWIN_USB_SRC) $(OPENBSD_USB_SRC) \
+ $(NETBSD_USB_SRC) $(WINDOWS_USB_SRC) $(WINCE_USB_SRC) \
+ $(POSIX_POLL_SRC) \
+ os/threads_posix.c os/threads_windows.c \
+ os/linux_udev.c os/linux_netlink.c
+
+@OS_DARWIN_TRUE@OS_SRC = $(DARWIN_USB_SRC) $(POSIX_POLL_SRC)
+@OS_HAIKU_TRUE@OS_SRC = $(POSIX_POLL_SRC)
+@OS_LINUX_TRUE@@USE_UDEV_FALSE@OS_SRC = $(LINUX_USBFS_SRC) $(POSIX_POLL_SRC) \
+@OS_LINUX_TRUE@@USE_UDEV_FALSE@ os/linux_netlink.c
+
+@OS_LINUX_TRUE@@USE_UDEV_TRUE@OS_SRC = $(LINUX_USBFS_SRC) $(POSIX_POLL_SRC) \
+@OS_LINUX_TRUE@@USE_UDEV_TRUE@ os/linux_udev.c
+
+@OS_NETBSD_TRUE@OS_SRC = $(NETBSD_USB_SRC) $(POSIX_POLL_SRC)
+@OS_OPENBSD_TRUE@OS_SRC = $(OPENBSD_USB_SRC) $(POSIX_POLL_SRC)
+@OS_WINDOWS_TRUE@OS_SRC = $(WINDOWS_USB_SRC)
+@OS_DARWIN_TRUE@AM_CFLAGS_EXT = -no-cpp-precomp
+@OS_HAIKU_TRUE@SUBDIRS = os/haiku
+@THREADS_POSIX_FALSE@THREADS_SRC = os/threads_windows.h os/threads_windows.c
+@THREADS_POSIX_TRUE@THREADS_SRC = os/threads_posix.h os/threads_posix.c
+libusb_1_0_la_CFLAGS = $(AM_CFLAGS)
+libusb_1_0_la_LDFLAGS = $(LTLDFLAGS)
+libusb_1_0_la_SOURCES = libusbi.h core.c descriptor.c io.c strerror.c sync.c \
+ os/linux_usbfs.h os/darwin_usb.h os/windows_usb.h os/windows_common.h \
+ hotplug.h hotplug.c $(THREADS_SRC) $(OS_SRC) \
+ os/poll_posix.h os/poll_windows.h
+
+@OS_HAIKU_TRUE@libusb_1_0_la_LIBADD = os/haiku/libhaikuusb.la
+hdrdir = $(includedir)/libusb-1.0
+hdr_HEADERS = libusb.h
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj .rc
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libusb/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu libusb/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+os/$(am__dirstamp):
+ @$(MKDIR_P) os
+ @: > os/$(am__dirstamp)
+os/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) os/$(DEPDIR)
+ @: > os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-threads_windows.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-threads_posix.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-darwin_usb.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-poll_posix.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-linux_usbfs.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-linux_netlink.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-linux_udev.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-netbsd_usb.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-openbsd_usb.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-poll_windows.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+os/libusb_1_0_la-windows_usb.lo: os/$(am__dirstamp) \
+ os/$(DEPDIR)/$(am__dirstamp)
+
+libusb-1.0.la: $(libusb_1_0_la_OBJECTS) $(libusb_1_0_la_DEPENDENCIES) $(EXTRA_libusb_1_0_la_DEPENDENCIES)
+ $(AM_V_CCLD)$(libusb_1_0_la_LINK) -rpath $(libdir) $(libusb_1_0_la_OBJECTS) $(libusb_1_0_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+ -rm -f os/*.$(OBJEXT)
+ -rm -f os/*.lo
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-core.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-descriptor.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-hotplug.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-io.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-strerror.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libusb_1_0_la-sync.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-darwin_usb.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-linux_netlink.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-linux_udev.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-linux_usbfs.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-netbsd_usb.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-openbsd_usb.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-poll_posix.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-poll_windows.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-threads_posix.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-threads_windows.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@os/$(DEPDIR)/libusb_1_0_la-windows_usb.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+libusb_1_0_la-core.lo: core.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-core.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-core.Tpo -c -o libusb_1_0_la-core.lo `test -f 'core.c' || echo '$(srcdir)/'`core.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-core.Tpo $(DEPDIR)/libusb_1_0_la-core.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='core.c' object='libusb_1_0_la-core.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-core.lo `test -f 'core.c' || echo '$(srcdir)/'`core.c
+
+libusb_1_0_la-descriptor.lo: descriptor.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-descriptor.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-descriptor.Tpo -c -o libusb_1_0_la-descriptor.lo `test -f 'descriptor.c' || echo '$(srcdir)/'`descriptor.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-descriptor.Tpo $(DEPDIR)/libusb_1_0_la-descriptor.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='descriptor.c' object='libusb_1_0_la-descriptor.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-descriptor.lo `test -f 'descriptor.c' || echo '$(srcdir)/'`descriptor.c
+
+libusb_1_0_la-io.lo: io.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-io.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-io.Tpo -c -o libusb_1_0_la-io.lo `test -f 'io.c' || echo '$(srcdir)/'`io.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-io.Tpo $(DEPDIR)/libusb_1_0_la-io.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='io.c' object='libusb_1_0_la-io.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-io.lo `test -f 'io.c' || echo '$(srcdir)/'`io.c
+
+libusb_1_0_la-strerror.lo: strerror.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-strerror.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-strerror.Tpo -c -o libusb_1_0_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-strerror.Tpo $(DEPDIR)/libusb_1_0_la-strerror.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='strerror.c' object='libusb_1_0_la-strerror.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+
+libusb_1_0_la-sync.lo: sync.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-sync.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-sync.Tpo -c -o libusb_1_0_la-sync.lo `test -f 'sync.c' || echo '$(srcdir)/'`sync.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-sync.Tpo $(DEPDIR)/libusb_1_0_la-sync.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='sync.c' object='libusb_1_0_la-sync.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-sync.lo `test -f 'sync.c' || echo '$(srcdir)/'`sync.c
+
+libusb_1_0_la-hotplug.lo: hotplug.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT libusb_1_0_la-hotplug.lo -MD -MP -MF $(DEPDIR)/libusb_1_0_la-hotplug.Tpo -c -o libusb_1_0_la-hotplug.lo `test -f 'hotplug.c' || echo '$(srcdir)/'`hotplug.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libusb_1_0_la-hotplug.Tpo $(DEPDIR)/libusb_1_0_la-hotplug.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='hotplug.c' object='libusb_1_0_la-hotplug.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o libusb_1_0_la-hotplug.lo `test -f 'hotplug.c' || echo '$(srcdir)/'`hotplug.c
+
+os/libusb_1_0_la-threads_windows.lo: os/threads_windows.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-threads_windows.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-threads_windows.Tpo -c -o os/libusb_1_0_la-threads_windows.lo `test -f 'os/threads_windows.c' || echo '$(srcdir)/'`os/threads_windows.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-threads_windows.Tpo os/$(DEPDIR)/libusb_1_0_la-threads_windows.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/threads_windows.c' object='os/libusb_1_0_la-threads_windows.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-threads_windows.lo `test -f 'os/threads_windows.c' || echo '$(srcdir)/'`os/threads_windows.c
+
+os/libusb_1_0_la-threads_posix.lo: os/threads_posix.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-threads_posix.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-threads_posix.Tpo -c -o os/libusb_1_0_la-threads_posix.lo `test -f 'os/threads_posix.c' || echo '$(srcdir)/'`os/threads_posix.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-threads_posix.Tpo os/$(DEPDIR)/libusb_1_0_la-threads_posix.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/threads_posix.c' object='os/libusb_1_0_la-threads_posix.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-threads_posix.lo `test -f 'os/threads_posix.c' || echo '$(srcdir)/'`os/threads_posix.c
+
+os/libusb_1_0_la-darwin_usb.lo: os/darwin_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-darwin_usb.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-darwin_usb.Tpo -c -o os/libusb_1_0_la-darwin_usb.lo `test -f 'os/darwin_usb.c' || echo '$(srcdir)/'`os/darwin_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-darwin_usb.Tpo os/$(DEPDIR)/libusb_1_0_la-darwin_usb.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/darwin_usb.c' object='os/libusb_1_0_la-darwin_usb.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-darwin_usb.lo `test -f 'os/darwin_usb.c' || echo '$(srcdir)/'`os/darwin_usb.c
+
+os/libusb_1_0_la-poll_posix.lo: os/poll_posix.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-poll_posix.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-poll_posix.Tpo -c -o os/libusb_1_0_la-poll_posix.lo `test -f 'os/poll_posix.c' || echo '$(srcdir)/'`os/poll_posix.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-poll_posix.Tpo os/$(DEPDIR)/libusb_1_0_la-poll_posix.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/poll_posix.c' object='os/libusb_1_0_la-poll_posix.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-poll_posix.lo `test -f 'os/poll_posix.c' || echo '$(srcdir)/'`os/poll_posix.c
+
+os/libusb_1_0_la-linux_usbfs.lo: os/linux_usbfs.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-linux_usbfs.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-linux_usbfs.Tpo -c -o os/libusb_1_0_la-linux_usbfs.lo `test -f 'os/linux_usbfs.c' || echo '$(srcdir)/'`os/linux_usbfs.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-linux_usbfs.Tpo os/$(DEPDIR)/libusb_1_0_la-linux_usbfs.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/linux_usbfs.c' object='os/libusb_1_0_la-linux_usbfs.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-linux_usbfs.lo `test -f 'os/linux_usbfs.c' || echo '$(srcdir)/'`os/linux_usbfs.c
+
+os/libusb_1_0_la-linux_netlink.lo: os/linux_netlink.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-linux_netlink.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-linux_netlink.Tpo -c -o os/libusb_1_0_la-linux_netlink.lo `test -f 'os/linux_netlink.c' || echo '$(srcdir)/'`os/linux_netlink.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-linux_netlink.Tpo os/$(DEPDIR)/libusb_1_0_la-linux_netlink.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/linux_netlink.c' object='os/libusb_1_0_la-linux_netlink.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-linux_netlink.lo `test -f 'os/linux_netlink.c' || echo '$(srcdir)/'`os/linux_netlink.c
+
+os/libusb_1_0_la-linux_udev.lo: os/linux_udev.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-linux_udev.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-linux_udev.Tpo -c -o os/libusb_1_0_la-linux_udev.lo `test -f 'os/linux_udev.c' || echo '$(srcdir)/'`os/linux_udev.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-linux_udev.Tpo os/$(DEPDIR)/libusb_1_0_la-linux_udev.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/linux_udev.c' object='os/libusb_1_0_la-linux_udev.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-linux_udev.lo `test -f 'os/linux_udev.c' || echo '$(srcdir)/'`os/linux_udev.c
+
+os/libusb_1_0_la-netbsd_usb.lo: os/netbsd_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-netbsd_usb.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-netbsd_usb.Tpo -c -o os/libusb_1_0_la-netbsd_usb.lo `test -f 'os/netbsd_usb.c' || echo '$(srcdir)/'`os/netbsd_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-netbsd_usb.Tpo os/$(DEPDIR)/libusb_1_0_la-netbsd_usb.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/netbsd_usb.c' object='os/libusb_1_0_la-netbsd_usb.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-netbsd_usb.lo `test -f 'os/netbsd_usb.c' || echo '$(srcdir)/'`os/netbsd_usb.c
+
+os/libusb_1_0_la-openbsd_usb.lo: os/openbsd_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-openbsd_usb.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-openbsd_usb.Tpo -c -o os/libusb_1_0_la-openbsd_usb.lo `test -f 'os/openbsd_usb.c' || echo '$(srcdir)/'`os/openbsd_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-openbsd_usb.Tpo os/$(DEPDIR)/libusb_1_0_la-openbsd_usb.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/openbsd_usb.c' object='os/libusb_1_0_la-openbsd_usb.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-openbsd_usb.lo `test -f 'os/openbsd_usb.c' || echo '$(srcdir)/'`os/openbsd_usb.c
+
+os/libusb_1_0_la-poll_windows.lo: os/poll_windows.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-poll_windows.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-poll_windows.Tpo -c -o os/libusb_1_0_la-poll_windows.lo `test -f 'os/poll_windows.c' || echo '$(srcdir)/'`os/poll_windows.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-poll_windows.Tpo os/$(DEPDIR)/libusb_1_0_la-poll_windows.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/poll_windows.c' object='os/libusb_1_0_la-poll_windows.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-poll_windows.lo `test -f 'os/poll_windows.c' || echo '$(srcdir)/'`os/poll_windows.c
+
+os/libusb_1_0_la-windows_usb.lo: os/windows_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -MT os/libusb_1_0_la-windows_usb.lo -MD -MP -MF os/$(DEPDIR)/libusb_1_0_la-windows_usb.Tpo -c -o os/libusb_1_0_la-windows_usb.lo `test -f 'os/windows_usb.c' || echo '$(srcdir)/'`os/windows_usb.c
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) os/$(DEPDIR)/libusb_1_0_la-windows_usb.Tpo os/$(DEPDIR)/libusb_1_0_la-windows_usb.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='os/windows_usb.c' object='os/libusb_1_0_la-windows_usb.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libusb_1_0_la_CFLAGS) $(CFLAGS) -c -o os/libusb_1_0_la-windows_usb.lo `test -f 'os/windows_usb.c' || echo '$(srcdir)/'`os/windows_usb.c
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+ -rm -rf os/.libs os/_libs
+install-hdrHEADERS: $(hdr_HEADERS)
+ @$(NORMAL_INSTALL)
+ @list='$(hdr_HEADERS)'; test -n "$(hdrdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(hdrdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(hdrdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(hdrdir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(hdrdir)" || exit $$?; \
+ done
+
+uninstall-hdrHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(hdr_HEADERS)'; test -n "$(hdrdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(hdrdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LTLIBRARIES) $(HEADERS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(hdrdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f os/$(DEPDIR)/$(am__dirstamp)
+ -rm -f os/$(am__dirstamp)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+ mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -rf ./$(DEPDIR) os/$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-hdrHEADERS
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -rf ./$(DEPDIR) os/$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-hdrHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+ check-am clean clean-generic clean-libLTLIBRARIES \
+ clean-libtool cscopelist-am ctags ctags-am dist-hook distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-hdrHEADERS \
+ install-html install-html-am install-info install-info-am \
+ install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am uninstall-hdrHEADERS \
+ uninstall-libLTLIBRARIES
+
+.PRECIOUS: Makefile
+
+all: libusb-1.0.la libusb-1.0.dll
+
+dist-hook:
+ cp -r os/haiku $(distdir)/os/haiku
+ rm -rf $(distdir)/os/haiku/autom4te.cache
+
+@OS_WINDOWS_TRUE@.rc.lo:
+@OS_WINDOWS_TRUE@ $(AM_V_GEN)$(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --tag=RC --mode=compile $(RC) $(RCFLAGS) -i $< -o $@
+
+@OS_WINDOWS_TRUE@libusb-1.0.rc: version.h version_nano.h
+
+libusb-1.0.dll: libusb-1.0.def libusb-1.0.la
+# Rebuild the import lib from the .def so that MS and MinGW DLLs can be interchanged
+@CREATE_IMPORT_LIB_TRUE@ $(AM_V_GEN)$(DLLTOOL) $(DLLTOOLFLAGS) --kill-at --input-def $(srcdir)/libusb-1.0.def --dllname $@ --output-lib .libs/$@.a
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * Core functions for libusb
+ * Copyright © 2012-2013 Nathan Hjelm <hjelmn@cs.unm.edu>
+ * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "config.h"
+
+#include <errno.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_TIME_H
+#include <sys/time.h>
+#endif
+#ifdef HAVE_SYSLOG_H
+#include <syslog.h>
+#endif
+
+#ifdef __ANDROID__
+#include <android/log.h>
+#endif
+
+#include "libusbi.h"
+#include "hotplug.h"
+
+#if defined(OS_LINUX)
+const struct usbi_os_backend * const usbi_backend = &linux_usbfs_backend;
+#elif defined(OS_DARWIN)
+const struct usbi_os_backend * const usbi_backend = &darwin_backend;
+#elif defined(OS_OPENBSD)
+const struct usbi_os_backend * const usbi_backend = &openbsd_backend;
+#elif defined(OS_NETBSD)
+const struct usbi_os_backend * const usbi_backend = &netbsd_backend;
+#elif defined(OS_WINDOWS)
+const struct usbi_os_backend * const usbi_backend = &windows_backend;
+#elif defined(OS_WINCE)
+const struct usbi_os_backend * const usbi_backend = &wince_backend;
+#elif defined(OS_HAIKU)
+const struct usbi_os_backend * const usbi_backend = &haiku_usb_raw_backend;
+#else
+#error "Unsupported OS"
+#endif
+
+struct libusb_context *usbi_default_context = NULL;
+static const struct libusb_version libusb_version_internal =
+ { LIBUSB_MAJOR, LIBUSB_MINOR, LIBUSB_MICRO, LIBUSB_NANO,
+ LIBUSB_RC, "http://libusb.info" };
+static int default_context_refcnt = 0;
+static usbi_mutex_static_t default_context_lock = USBI_MUTEX_INITIALIZER;
+static struct timeval timestamp_origin = { 0, 0 };
+
+usbi_mutex_static_t active_contexts_lock = USBI_MUTEX_INITIALIZER;
+struct list_head active_contexts_list;
+
+/**
+ * \mainpage libusb-1.0 API Reference
+ *
+ * \section intro Introduction
+ *
+ * libusb is an open source library that allows you to communicate with USB
+ * devices from userspace. For more info, see the
+ * <a href="http://libusb.info">libusb homepage</a>.
+ *
+ * This documentation is aimed at application developers wishing to
+ * communicate with USB peripherals from their own software. After reviewing
+ * this documentation, feedback and questions can be sent to the
+ * <a href="http://mailing-list.libusb.info">libusb-devel mailing list</a>.
+ *
+ * This documentation assumes knowledge of how to operate USB devices from
+ * a software standpoint (descriptors, configurations, interfaces, endpoints,
+ * control/bulk/interrupt/isochronous transfers, etc). Full information
+ * can be found in the <a href="http://www.usb.org/developers/docs/">USB 3.0
+ * Specification</a> which is available for free download. You can probably
+ * find less verbose introductions by searching the web.
+ *
+ * \section API Application Programming Interface (API)
+ *
+ * See the \ref api page for a complete list of the libusb functions.
+ *
+ * \section features Library features
+ *
+ * - All transfer types supported (control/bulk/interrupt/isochronous)
+ * - 2 transfer interfaces:
+ * -# Synchronous (simple)
+ * -# Asynchronous (more complicated, but more powerful)
+ * - Thread safe (although the asynchronous interface means that you
+ * usually won't need to thread)
+ * - Lightweight with lean API
+ * - Compatible with libusb-0.1 through the libusb-compat-0.1 translation layer
+ * - Hotplug support (on some platforms). See \ref hotplug.
+ *
+ * \section gettingstarted Getting Started
+ *
+ * To begin reading the API documentation, start with the Modules page which
+ * links to the different categories of libusb's functionality.
+ *
+ * One decision you will have to make is whether to use the synchronous
+ * or the asynchronous data transfer interface. The \ref io documentation
+ * provides some insight into this topic.
+ *
+ * Some example programs can be found in the libusb source distribution under
+ * the "examples" subdirectory. The libusb homepage includes a list of
+ * real-life project examples which use libusb.
+ *
+ * \section errorhandling Error handling
+ *
+ * libusb functions typically return 0 on success or a negative error code
+ * on failure. These negative error codes relate to LIBUSB_ERROR constants
+ * which are listed on the \ref misc "miscellaneous" documentation page.
+ *
+ * \section msglog Debug message logging
+ *
+ * libusb uses stderr for all logging. By default, logging is set to NONE,
+ * which means that no output will be produced. However, unless the library
+ * has been compiled with logging disabled, then any application calls to
+ * libusb_set_debug(), or the setting of the environmental variable
+ * LIBUSB_DEBUG outside of the application, can result in logging being
+ * produced. Your application should therefore not close stderr, but instead
+ * direct it to the null device if its output is undesireable.
+ *
+ * The libusb_set_debug() function can be used to enable logging of certain
+ * messages. Under standard configuration, libusb doesn't really log much
+ * so you are advised to use this function to enable all error/warning/
+ * informational messages. It will help debug problems with your software.
+ *
+ * The logged messages are unstructured. There is no one-to-one correspondence
+ * between messages being logged and success or failure return codes from
+ * libusb functions. There is no format to the messages, so you should not
+ * try to capture or parse them. They are not and will not be localized.
+ * These messages are not intended to being passed to your application user;
+ * instead, you should interpret the error codes returned from libusb functions
+ * and provide appropriate notification to the user. The messages are simply
+ * there to aid you as a programmer, and if you're confused because you're
+ * getting a strange error code from a libusb function, enabling message
+ * logging may give you a suitable explanation.
+ *
+ * The LIBUSB_DEBUG environment variable can be used to enable message logging
+ * at run-time. This environment variable should be set to a log level number,
+ * which is interpreted the same as the libusb_set_debug() parameter. When this
+ * environment variable is set, the message logging verbosity level is fixed
+ * and libusb_set_debug() effectively does nothing.
+ *
+ * libusb can be compiled without any logging functions, useful for embedded
+ * systems. In this case, libusb_set_debug() and the LIBUSB_DEBUG environment
+ * variable have no effects.
+ *
+ * libusb can also be compiled with verbose debugging messages always. When
+ * the library is compiled in this way, all messages of all verbosities are
+ * always logged. libusb_set_debug() and the LIBUSB_DEBUG environment variable
+ * have no effects.
+ *
+ * \section remarks Other remarks
+ *
+ * libusb does have imperfections. The \ref caveats "caveats" page attempts
+ * to document these.
+ */
+
+/**
+ * \page caveats Caveats
+ *
+ * \section devresets Device resets
+ *
+ * The libusb_reset_device() function allows you to reset a device. If your
+ * program has to call such a function, it should obviously be aware that
+ * the reset will cause device state to change (e.g. register values may be
+ * reset).
+ *
+ * The problem is that any other program could reset the device your program
+ * is working with, at any time. libusb does not offer a mechanism to inform
+ * you when this has happened, so if someone else resets your device it will
+ * not be clear to your own program why the device state has changed.
+ *
+ * Ultimately, this is a limitation of writing drivers in userspace.
+ * Separation from the USB stack in the underlying kernel makes it difficult
+ * for the operating system to deliver such notifications to your program.
+ * The Linux kernel USB stack allows such reset notifications to be delivered
+ * to in-kernel USB drivers, but it is not clear how such notifications could
+ * be delivered to second-class drivers that live in userspace.
+ *
+ * \section blockonly Blocking-only functionality
+ *
+ * The functionality listed below is only available through synchronous,
+ * blocking functions. There are no asynchronous/non-blocking alternatives,
+ * and no clear ways of implementing these.
+ *
+ * - Configuration activation (libusb_set_configuration())
+ * - Interface/alternate setting activation (libusb_set_interface_alt_setting())
+ * - Releasing of interfaces (libusb_release_interface())
+ * - Clearing of halt/stall condition (libusb_clear_halt())
+ * - Device resets (libusb_reset_device())
+ *
+ * \section configsel Configuration selection and handling
+ *
+ * When libusb presents a device handle to an application, there is a chance
+ * that the corresponding device may be in unconfigured state. For devices
+ * with multiple configurations, there is also a chance that the configuration
+ * currently selected is not the one that the application wants to use.
+ *
+ * The obvious solution is to add a call to libusb_set_configuration() early
+ * on during your device initialization routines, but there are caveats to
+ * be aware of:
+ * -# If the device is already in the desired configuration, calling
+ * libusb_set_configuration() using the same configuration value will cause
+ * a lightweight device reset. This may not be desirable behaviour.
+ * -# In the case where the desired configuration is already active, libusb
+ * may not even be able to perform a lightweight device reset. For example,
+ * take my USB keyboard with fingerprint reader: I'm interested in driving
+ * the fingerprint reader interface through libusb, but the kernel's
+ * USB-HID driver will almost always have claimed the keyboard interface.
+ * Because the kernel has claimed an interface, it is not even possible to
+ * perform the lightweight device reset, so libusb_set_configuration() will
+ * fail. (Luckily the device in question only has a single configuration.)
+ * -# libusb will be unable to set a configuration if other programs or
+ * drivers have claimed interfaces. In particular, this means that kernel
+ * drivers must be detached from all the interfaces before
+ * libusb_set_configuration() may succeed.
+ *
+ * One solution to some of the above problems is to consider the currently
+ * active configuration. If the configuration we want is already active, then
+ * we don't have to select any configuration:
+\code
+cfg = -1;
+libusb_get_configuration(dev, &cfg);
+if (cfg != desired)
+ libusb_set_configuration(dev, desired);
+\endcode
+ *
+ * This is probably suitable for most scenarios, but is inherently racy:
+ * another application or driver may change the selected configuration
+ * <em>after</em> the libusb_get_configuration() call.
+ *
+ * Even in cases where libusb_set_configuration() succeeds, consider that other
+ * applications or drivers may change configuration after your application
+ * calls libusb_set_configuration().
+ *
+ * One possible way to lock your device into a specific configuration is as
+ * follows:
+ * -# Set the desired configuration (or use the logic above to realise that
+ * it is already in the desired configuration)
+ * -# Claim the interface that you wish to use
+ * -# Check that the currently active configuration is the one that you want
+ * to use.
+ *
+ * The above method works because once an interface is claimed, no application
+ * or driver is able to select another configuration.
+ *
+ * \section earlycomp Early transfer completion
+ *
+ * NOTE: This section is currently Linux-centric. I am not sure if any of these
+ * considerations apply to Darwin or other platforms.
+ *
+ * When a transfer completes early (i.e. when less data is received/sent in
+ * any one packet than the transfer buffer allows for) then libusb is designed
+ * to terminate the transfer immediately, not transferring or receiving any
+ * more data unless other transfers have been queued by the user.
+ *
+ * On legacy platforms, libusb is unable to do this in all situations. After
+ * the incomplete packet occurs, "surplus" data may be transferred. For recent
+ * versions of libusb, this information is kept (the data length of the
+ * transfer is updated) and, for device-to-host transfers, any surplus data was
+ * added to the buffer. Still, this is not a nice solution because it loses the
+ * information about the end of the short packet, and the user probably wanted
+ * that surplus data to arrive in the next logical transfer.
+ *
+ *
+ * \section zlp Zero length packets
+ *
+ * - libusb is able to send a packet of zero length to an endpoint simply by
+ * submitting a transfer of zero length.
+ * - The \ref libusb_transfer_flags::LIBUSB_TRANSFER_ADD_ZERO_PACKET
+ * "LIBUSB_TRANSFER_ADD_ZERO_PACKET" flag is currently only supported on Linux.
+ */
+
+/**
+ * \page contexts Contexts
+ *
+ * It is possible that libusb may be used simultaneously from two independent
+ * libraries linked into the same executable. For example, if your application
+ * has a plugin-like system which allows the user to dynamically load a range
+ * of modules into your program, it is feasible that two independently
+ * developed modules may both use libusb.
+ *
+ * libusb is written to allow for these multiple user scenarios. The two
+ * "instances" of libusb will not interfere: libusb_set_debug() calls
+ * from one user will not affect the same settings for other users, other
+ * users can continue using libusb after one of them calls libusb_exit(), etc.
+ *
+ * This is made possible through libusb's <em>context</em> concept. When you
+ * call libusb_init(), you are (optionally) given a context. You can then pass
+ * this context pointer back into future libusb functions.
+ *
+ * In order to keep things simple for more simplistic applications, it is
+ * legal to pass NULL to all functions requiring a context pointer (as long as
+ * you're sure no other code will attempt to use libusb from the same process).
+ * When you pass NULL, the default context will be used. The default context
+ * is created the first time a process calls libusb_init() when no other
+ * context is alive. Contexts are destroyed during libusb_exit().
+ *
+ * The default context is reference-counted and can be shared. That means that
+ * if libusb_init(NULL) is called twice within the same process, the two
+ * users end up sharing the same context. The deinitialization and freeing of
+ * the default context will only happen when the last user calls libusb_exit().
+ * In other words, the default context is created and initialized when its
+ * reference count goes from 0 to 1, and is deinitialized and destroyed when
+ * its reference count goes from 1 to 0.
+ *
+ * You may be wondering why only a subset of libusb functions require a
+ * context pointer in their function definition. Internally, libusb stores
+ * context pointers in other objects (e.g. libusb_device instances) and hence
+ * can infer the context from those objects.
+ */
+
+ /**
+ * \page api Application Programming Interface
+ *
+ * This is the complete list of libusb functions, structures and
+ * enumerations in alphabetical order.
+ *
+ * \section Functions
+ * - libusb_alloc_streams()
+ * - libusb_alloc_transfer()
+ * - libusb_attach_kernel_driver()
+ * - libusb_bulk_transfer()
+ * - libusb_cancel_transfer()
+ * - libusb_claim_interface()
+ * - libusb_clear_halt()
+ * - libusb_close()
+ * - libusb_control_transfer()
+ * - libusb_control_transfer_get_data()
+ * - libusb_control_transfer_get_setup()
+ * - libusb_cpu_to_le16()
+ * - libusb_detach_kernel_driver()
+ * - libusb_error_name()
+ * - libusb_event_handler_active()
+ * - libusb_event_handling_ok()
+ * - libusb_exit()
+ * - libusb_fill_bulk_stream_transfer()
+ * - libusb_fill_bulk_transfer()
+ * - libusb_fill_control_setup()
+ * - libusb_fill_control_transfer()
+ * - libusb_fill_interrupt_transfer()
+ * - libusb_fill_iso_transfer()
+ * - libusb_free_bos_descriptor()
+ * - libusb_free_config_descriptor()
+ * - libusb_free_container_id_descriptor()
+ * - libusb_free_device_list()
+ * - libusb_free_ss_endpoint_companion_descriptor()
+ * - libusb_free_ss_usb_device_capability_descriptor()
+ * - libusb_free_streams()
+ * - libusb_free_transfer()
+ * - libusb_free_usb_2_0_extension_descriptor()
+ * - libusb_get_active_config_descriptor()
+ * - libusb_get_bos_descriptor()
+ * - libusb_get_bus_number()
+ * - libusb_get_config_descriptor()
+ * - libusb_get_config_descriptor_by_value()
+ * - libusb_get_configuration()
+ * - libusb_get_container_id_descriptor()
+ * - libusb_get_descriptor()
+ * - libusb_get_device()
+ * - libusb_get_device_address()
+ * - libusb_get_device_descriptor()
+ * - libusb_get_device_list()
+ * - libusb_get_device_speed()
+ * - libusb_get_iso_packet_buffer()
+ * - libusb_get_iso_packet_buffer_simple()
+ * - libusb_get_max_iso_packet_size()
+ * - libusb_get_max_packet_size()
+ * - libusb_get_next_timeout()
+ * - libusb_get_parent()
+ * - libusb_get_port_number()
+ * - libusb_get_port_numbers()
+ * - libusb_get_ss_endpoint_companion_descriptor()
+ * - libusb_get_ss_usb_device_capability_descriptor()
+ * - libusb_get_string_descriptor()
+ * - libusb_get_string_descriptor_ascii()
+ * - libusb_get_usb_2_0_extension_descriptor()
+ * - libusb_get_version()
+ * - libusb_handle_events()
+ * - libusb_handle_events_completed()
+ * - libusb_handle_events_locked()
+ * - libusb_handle_events_timeout()
+ * - libusb_handle_events_timeout_completed()
+ * - libusb_has_capability()
+ * - libusb_hotplug_deregister_callback()
+ * - libusb_hotplug_register_callback()
+ * - libusb_init()
+ * - libusb_interrupt_transfer()
+ * - libusb_kernel_driver_active()
+ * - libusb_lock_events()
+ * - libusb_lock_event_waiters()
+ * - libusb_open()
+ * - libusb_open_device_with_vid_pid()
+ * - libusb_pollfds_handle_timeouts()
+ * - libusb_ref_device()
+ * - libusb_release_interface()
+ * - libusb_reset_device()
+ * - libusb_set_auto_detach_kernel_driver()
+ * - libusb_set_configuration()
+ * - libusb_set_debug()
+ * - libusb_set_interface_alt_setting()
+ * - libusb_set_iso_packet_lengths()
+ * - libusb_setlocale()
+ * - libusb_set_pollfd_notifiers()
+ * - libusb_strerror()
+ * - libusb_submit_transfer()
+ * - libusb_transfer_get_stream_id()
+ * - libusb_transfer_set_stream_id()
+ * - libusb_try_lock_events()
+ * - libusb_unlock_events()
+ * - libusb_unlock_event_waiters()
+ * - libusb_unref_device()
+ * - libusb_wait_for_event()
+ *
+ * \section Structures
+ * - libusb_bos_descriptor
+ * - libusb_bos_dev_capability_descriptor
+ * - libusb_config_descriptor
+ * - libusb_container_id_descriptor
+ * - \ref libusb_context
+ * - libusb_control_setup
+ * - \ref libusb_device
+ * - libusb_device_descriptor
+ * - \ref libusb_device_handle
+ * - libusb_endpoint_descriptor
+ * - libusb_interface
+ * - libusb_interface_descriptor
+ * - libusb_iso_packet_descriptor
+ * - libusb_pollfd
+ * - libusb_ss_endpoint_companion_descriptor
+ * - libusb_ss_usb_device_capability_descriptor
+ * - libusb_transfer
+ * - libusb_usb_2_0_extension_descriptor
+ * - libusb_version
+ *
+ * \section Enums
+ * - \ref libusb_bos_type
+ * - \ref libusb_capability
+ * - \ref libusb_class_code
+ * - \ref libusb_descriptor_type
+ * - \ref libusb_endpoint_direction
+ * - \ref libusb_error
+ * - \ref libusb_iso_sync_type
+ * - \ref libusb_iso_usage_type
+ * - \ref libusb_log_level
+ * - \ref libusb_request_recipient
+ * - \ref libusb_request_type
+ * - \ref libusb_speed
+ * - \ref libusb_ss_usb_device_capability_attributes
+ * - \ref libusb_standard_request
+ * - \ref libusb_supported_speed
+ * - \ref libusb_transfer_flags
+ * - \ref libusb_transfer_status
+ * - \ref libusb_transfer_type
+ * - \ref libusb_usb_2_0_extension_attributes
+ */
+
+/**
+ * @defgroup lib Library initialization/deinitialization
+ * This page details how to initialize and deinitialize libusb. Initialization
+ * must be performed before using any libusb functionality, and similarly you
+ * must not call any libusb functions after deinitialization.
+ */
+
+/**
+ * @defgroup dev Device handling and enumeration
+ * The functionality documented below is designed to help with the following
+ * operations:
+ * - Enumerating the USB devices currently attached to the system
+ * - Choosing a device to operate from your software
+ * - Opening and closing the chosen device
+ *
+ * \section nutshell In a nutshell...
+ *
+ * The description below really makes things sound more complicated than they
+ * actually are. The following sequence of function calls will be suitable
+ * for almost all scenarios and does not require you to have such a deep
+ * understanding of the resource management issues:
+ * \code
+// discover devices
+libusb_device **list;
+libusb_device *found = NULL;
+ssize_t cnt = libusb_get_device_list(NULL, &list);
+ssize_t i = 0;
+int err = 0;
+if (cnt < 0)
+ error();
+
+for (i = 0; i < cnt; i++) {
+ libusb_device *device = list[i];
+ if (is_interesting(device)) {
+ found = device;
+ break;
+ }
+}
+
+if (found) {
+ libusb_device_handle *handle;
+
+ err = libusb_open(found, &handle);
+ if (err)
+ error();
+ // etc
+}
+
+libusb_free_device_list(list, 1);
+\endcode
+ *
+ * The two important points:
+ * - You asked libusb_free_device_list() to unreference the devices (2nd
+ * parameter)
+ * - You opened the device before freeing the list and unreferencing the
+ * devices
+ *
+ * If you ended up with a handle, you can now proceed to perform I/O on the
+ * device.
+ *
+ * \section devshandles Devices and device handles
+ * libusb has a concept of a USB device, represented by the
+ * \ref libusb_device opaque type. A device represents a USB device that
+ * is currently or was previously connected to the system. Using a reference
+ * to a device, you can determine certain information about the device (e.g.
+ * you can read the descriptor data).
+ *
+ * The libusb_get_device_list() function can be used to obtain a list of
+ * devices currently connected to the system. This is known as device
+ * discovery.
+ *
+ * Just because you have a reference to a device does not mean it is
+ * necessarily usable. The device may have been unplugged, you may not have
+ * permission to operate such device, or another program or driver may be
+ * using the device.
+ *
+ * When you've found a device that you'd like to operate, you must ask
+ * libusb to open the device using the libusb_open() function. Assuming
+ * success, libusb then returns you a <em>device handle</em>
+ * (a \ref libusb_device_handle pointer). All "real" I/O operations then
+ * operate on the handle rather than the original device pointer.
+ *
+ * \section devref Device discovery and reference counting
+ *
+ * Device discovery (i.e. calling libusb_get_device_list()) returns a
+ * freshly-allocated list of devices. The list itself must be freed when
+ * you are done with it. libusb also needs to know when it is OK to free
+ * the contents of the list - the devices themselves.
+ *
+ * To handle these issues, libusb provides you with two separate items:
+ * - A function to free the list itself
+ * - A reference counting system for the devices inside
+ *
+ * New devices presented by the libusb_get_device_list() function all have a
+ * reference count of 1. You can increase and decrease reference count using
+ * libusb_ref_device() and libusb_unref_device(). A device is destroyed when
+ * its reference count reaches 0.
+ *
+ * With the above information in mind, the process of opening a device can
+ * be viewed as follows:
+ * -# Discover devices using libusb_get_device_list().
+ * -# Choose the device that you want to operate, and call libusb_open().
+ * -# Unref all devices in the discovered device list.
+ * -# Free the discovered device list.
+ *
+ * The order is important - you must not unreference the device before
+ * attempting to open it, because unreferencing it may destroy the device.
+ *
+ * For convenience, the libusb_free_device_list() function includes a
+ * parameter to optionally unreference all the devices in the list before
+ * freeing the list itself. This combines steps 3 and 4 above.
+ *
+ * As an implementation detail, libusb_open() actually adds a reference to
+ * the device in question. This is because the device remains available
+ * through the handle via libusb_get_device(). The reference is deleted during
+ * libusb_close().
+ */
+
+/** @defgroup misc Miscellaneous */
+
+/* we traverse usbfs without knowing how many devices we are going to find.
+ * so we create this discovered_devs model which is similar to a linked-list
+ * which grows when required. it can be freed once discovery has completed,
+ * eliminating the need for a list node in the libusb_device structure
+ * itself. */
+#define DISCOVERED_DEVICES_SIZE_STEP 8
+
+static struct discovered_devs *discovered_devs_alloc(void)
+{
+ struct discovered_devs *ret =
+ malloc(sizeof(*ret) + (sizeof(void *) * DISCOVERED_DEVICES_SIZE_STEP));
+
+ if (ret) {
+ ret->len = 0;
+ ret->capacity = DISCOVERED_DEVICES_SIZE_STEP;
+ }
+ return ret;
+}
+
+/* append a device to the discovered devices collection. may realloc itself,
+ * returning new discdevs. returns NULL on realloc failure. */
+struct discovered_devs *discovered_devs_append(
+ struct discovered_devs *discdevs, struct libusb_device *dev)
+{
+ size_t len = discdevs->len;
+ size_t capacity;
+
+ /* if there is space, just append the device */
+ if (len < discdevs->capacity) {
+ discdevs->devices[len] = libusb_ref_device(dev);
+ discdevs->len++;
+ return discdevs;
+ }
+
+ /* exceeded capacity, need to grow */
+ usbi_dbg("need to increase capacity");
+ capacity = discdevs->capacity + DISCOVERED_DEVICES_SIZE_STEP;
+ discdevs = usbi_reallocf(discdevs,
+ sizeof(*discdevs) + (sizeof(void *) * capacity));
+ if (discdevs) {
+ discdevs->capacity = capacity;
+ discdevs->devices[len] = libusb_ref_device(dev);
+ discdevs->len++;
+ }
+
+ return discdevs;
+}
+
+static void discovered_devs_free(struct discovered_devs *discdevs)
+{
+ size_t i;
+
+ for (i = 0; i < discdevs->len; i++)
+ libusb_unref_device(discdevs->devices[i]);
+
+ free(discdevs);
+}
+
+/* Allocate a new device with a specific session ID. The returned device has
+ * a reference count of 1. */
+struct libusb_device *usbi_alloc_device(struct libusb_context *ctx,
+ unsigned long session_id)
+{
+ size_t priv_size = usbi_backend->device_priv_size;
+ struct libusb_device *dev = calloc(1, sizeof(*dev) + priv_size);
+ int r;
+
+ if (!dev)
+ return NULL;
+
+ r = usbi_mutex_init(&dev->lock, NULL);
+ if (r) {
+ free(dev);
+ return NULL;
+ }
+
+ dev->ctx = ctx;
+ dev->refcnt = 1;
+ dev->session_data = session_id;
+ dev->speed = LIBUSB_SPEED_UNKNOWN;
+
+ if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ usbi_connect_device (dev);
+ }
+
+ return dev;
+}
+
+void usbi_connect_device(struct libusb_device *dev)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+
+ dev->attached = 1;
+
+ usbi_mutex_lock(&dev->ctx->usb_devs_lock);
+ list_add(&dev->list, &dev->ctx->usb_devs);
+ usbi_mutex_unlock(&dev->ctx->usb_devs_lock);
+
+ /* Signal that an event has occurred for this device if we support hotplug AND
+ * the hotplug message list is ready. This prevents an event from getting raised
+ * during initial enumeration. */
+ if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) {
+ usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED);
+ }
+}
+
+void usbi_disconnect_device(struct libusb_device *dev)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+
+ usbi_mutex_lock(&dev->lock);
+ dev->attached = 0;
+ usbi_mutex_unlock(&dev->lock);
+
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_del(&dev->list);
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+
+ /* Signal that an event has occurred for this device if we support hotplug AND
+ * the hotplug message list is ready. This prevents an event from getting raised
+ * during initial enumeration. libusb_handle_events will take care of dereferencing
+ * the device. */
+ if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) {
+ usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT);
+ }
+}
+
+/* Perform some final sanity checks on a newly discovered device. If this
+ * function fails (negative return code), the device should not be added
+ * to the discovered device list. */
+int usbi_sanitize_device(struct libusb_device *dev)
+{
+ int r;
+ uint8_t num_configurations;
+
+ r = usbi_device_cache_descriptor(dev);
+ if (r < 0)
+ return r;
+
+ num_configurations = dev->device_descriptor.bNumConfigurations;
+ if (num_configurations > USB_MAXCONFIG) {
+ usbi_err(DEVICE_CTX(dev), "too many configurations");
+ return LIBUSB_ERROR_IO;
+ } else if (0 == num_configurations)
+ usbi_dbg("zero configurations, maybe an unauthorized device");
+
+ dev->num_configurations = num_configurations;
+ return 0;
+}
+
+/* Examine libusb's internal list of known devices, looking for one with
+ * a specific session ID. Returns the matching device if it was found, and
+ * NULL otherwise. */
+struct libusb_device *usbi_get_device_by_session_id(struct libusb_context *ctx,
+ unsigned long session_id)
+{
+ struct libusb_device *dev;
+ struct libusb_device *ret = NULL;
+
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device)
+ if (dev->session_data == session_id) {
+ ret = libusb_ref_device(dev);
+ break;
+ }
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+
+ return ret;
+}
+
+/** @ingroup dev
+ * Returns a list of USB devices currently attached to the system. This is
+ * your entry point into finding a USB device to operate.
+ *
+ * You are expected to unreference all the devices when you are done with
+ * them, and then free the list with libusb_free_device_list(). Note that
+ * libusb_free_device_list() can unref all the devices for you. Be careful
+ * not to unreference a device you are about to open until after you have
+ * opened it.
+ *
+ * This return value of this function indicates the number of devices in
+ * the resultant list. The list is actually one element larger, as it is
+ * NULL-terminated.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param list output location for a list of devices. Must be later freed with
+ * libusb_free_device_list().
+ * \returns the number of devices in the outputted list, or any
+ * \ref libusb_error according to errors encountered by the backend.
+ */
+ssize_t API_EXPORTED libusb_get_device_list(libusb_context *ctx,
+ libusb_device ***list)
+{
+ struct discovered_devs *discdevs = discovered_devs_alloc();
+ struct libusb_device **ret;
+ int r = 0;
+ ssize_t i, len;
+ USBI_GET_CONTEXT(ctx);
+ usbi_dbg("");
+
+ if (!discdevs)
+ return LIBUSB_ERROR_NO_MEM;
+
+ if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ /* backend provides hotplug support */
+ struct libusb_device *dev;
+
+ if (usbi_backend->hotplug_poll)
+ usbi_backend->hotplug_poll();
+
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device) {
+ discdevs = discovered_devs_append(discdevs, dev);
+
+ if (!discdevs) {
+ r = LIBUSB_ERROR_NO_MEM;
+ break;
+ }
+ }
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+ } else {
+ /* backend does not provide hotplug support */
+ r = usbi_backend->get_device_list(ctx, &discdevs);
+ }
+
+ if (r < 0) {
+ len = r;
+ goto out;
+ }
+
+ /* convert discovered_devs into a list */
+ len = discdevs->len;
+ ret = calloc(len + 1, sizeof(struct libusb_device *));
+ if (!ret) {
+ len = LIBUSB_ERROR_NO_MEM;
+ goto out;
+ }
+
+ ret[len] = NULL;
+ for (i = 0; i < len; i++) {
+ struct libusb_device *dev = discdevs->devices[i];
+ ret[i] = libusb_ref_device(dev);
+ }
+ *list = ret;
+
+out:
+ discovered_devs_free(discdevs);
+ return len;
+}
+
+/** \ingroup dev
+ * Frees a list of devices previously discovered using
+ * libusb_get_device_list(). If the unref_devices parameter is set, the
+ * reference count of each device in the list is decremented by 1.
+ * \param list the list to free
+ * \param unref_devices whether to unref the devices in the list
+ */
+void API_EXPORTED libusb_free_device_list(libusb_device **list,
+ int unref_devices)
+{
+ if (!list)
+ return;
+
+ if (unref_devices) {
+ int i = 0;
+ struct libusb_device *dev;
+
+ while ((dev = list[i++]) != NULL)
+ libusb_unref_device(dev);
+ }
+ free(list);
+}
+
+/** \ingroup dev
+ * Get the number of the bus that a device is connected to.
+ * \param dev a device
+ * \returns the bus number
+ */
+uint8_t API_EXPORTED libusb_get_bus_number(libusb_device *dev)
+{
+ return dev->bus_number;
+}
+
+/** \ingroup dev
+ * Get the number of the port that a device is connected to.
+ * Unless the OS does something funky, or you are hot-plugging USB extension cards,
+ * the port number returned by this call is usually guaranteed to be uniquely tied
+ * to a physical port, meaning that different devices plugged on the same physical
+ * port should return the same port number.
+ *
+ * But outside of this, there is no guarantee that the port number returned by this
+ * call will remain the same, or even match the order in which ports have been
+ * numbered by the HUB/HCD manufacturer.
+ *
+ * \param dev a device
+ * \returns the port number (0 if not available)
+ */
+uint8_t API_EXPORTED libusb_get_port_number(libusb_device *dev)
+{
+ return dev->port_number;
+}
+
+/** \ingroup dev
+ * Get the list of all port numbers from root for the specified device
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ * \param dev a device
+ * \param port_numbers the array that should contain the port numbers
+ * \param port_numbers_len the maximum length of the array. As per the USB 3.0
+ * specs, the current maximum limit for the depth is 7.
+ * \returns the number of elements filled
+ * \returns LIBUSB_ERROR_OVERFLOW if the array is too small
+ */
+int API_EXPORTED libusb_get_port_numbers(libusb_device *dev,
+ uint8_t* port_numbers, int port_numbers_len)
+{
+ int i = port_numbers_len;
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+
+ if (port_numbers_len <= 0)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ // HCDs can be listed as devices with port #0
+ while((dev) && (dev->port_number != 0)) {
+ if (--i < 0) {
+ usbi_warn(ctx, "port numbers array is too small");
+ return LIBUSB_ERROR_OVERFLOW;
+ }
+ port_numbers[i] = dev->port_number;
+ dev = dev->parent_dev;
+ }
+ if (i < port_numbers_len)
+ memmove(port_numbers, &port_numbers[i], port_numbers_len - i);
+ return port_numbers_len - i;
+}
+
+/** \ingroup dev
+ * Deprecated please use libusb_get_port_numbers instead.
+ */
+int API_EXPORTED libusb_get_port_path(libusb_context *ctx, libusb_device *dev,
+ uint8_t* port_numbers, uint8_t port_numbers_len)
+{
+ UNUSED(ctx);
+
+ return libusb_get_port_numbers(dev, port_numbers, port_numbers_len);
+}
+
+/** \ingroup dev
+ * Get the the parent from the specified device.
+ * \param dev a device
+ * \returns the device parent or NULL if not available
+ * You should issue a \ref libusb_get_device_list() before calling this
+ * function and make sure that you only access the parent before issuing
+ * \ref libusb_free_device_list(). The reason is that libusb currently does
+ * not maintain a permanent list of device instances, and therefore can
+ * only guarantee that parents are fully instantiated within a
+ * libusb_get_device_list() - libusb_free_device_list() block.
+ */
+DEFAULT_VISIBILITY
+libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev)
+{
+ return dev->parent_dev;
+}
+
+/** \ingroup dev
+ * Get the address of the device on the bus it is connected to.
+ * \param dev a device
+ * \returns the device address
+ */
+uint8_t API_EXPORTED libusb_get_device_address(libusb_device *dev)
+{
+ return dev->device_address;
+}
+
+/** \ingroup dev
+ * Get the negotiated connection speed for a device.
+ * \param dev a device
+ * \returns a \ref libusb_speed code, where LIBUSB_SPEED_UNKNOWN means that
+ * the OS doesn't know or doesn't support returning the negotiated speed.
+ */
+int API_EXPORTED libusb_get_device_speed(libusb_device *dev)
+{
+ return dev->speed;
+}
+
+static const struct libusb_endpoint_descriptor *find_endpoint(
+ struct libusb_config_descriptor *config, unsigned char endpoint)
+{
+ int iface_idx;
+ for (iface_idx = 0; iface_idx < config->bNumInterfaces; iface_idx++) {
+ const struct libusb_interface *iface = &config->interface[iface_idx];
+ int altsetting_idx;
+
+ for (altsetting_idx = 0; altsetting_idx < iface->num_altsetting;
+ altsetting_idx++) {
+ const struct libusb_interface_descriptor *altsetting
+ = &iface->altsetting[altsetting_idx];
+ int ep_idx;
+
+ for (ep_idx = 0; ep_idx < altsetting->bNumEndpoints; ep_idx++) {
+ const struct libusb_endpoint_descriptor *ep =
+ &altsetting->endpoint[ep_idx];
+ if (ep->bEndpointAddress == endpoint)
+ return ep;
+ }
+ }
+ }
+ return NULL;
+}
+
+/** \ingroup dev
+ * Convenience function to retrieve the wMaxPacketSize value for a particular
+ * endpoint in the active device configuration.
+ *
+ * This function was originally intended to be of assistance when setting up
+ * isochronous transfers, but a design mistake resulted in this function
+ * instead. It simply returns the wMaxPacketSize value without considering
+ * its contents. If you're dealing with isochronous transfers, you probably
+ * want libusb_get_max_iso_packet_size() instead.
+ *
+ * \param dev a device
+ * \param endpoint address of the endpoint in question
+ * \returns the wMaxPacketSize value
+ * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
+ * \returns LIBUSB_ERROR_OTHER on other failure
+ */
+int API_EXPORTED libusb_get_max_packet_size(libusb_device *dev,
+ unsigned char endpoint)
+{
+ struct libusb_config_descriptor *config;
+ const struct libusb_endpoint_descriptor *ep;
+ int r;
+
+ r = libusb_get_active_config_descriptor(dev, &config);
+ if (r < 0) {
+ usbi_err(DEVICE_CTX(dev),
+ "could not retrieve active config descriptor");
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ ep = find_endpoint(config, endpoint);
+ if (!ep) {
+ r = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
+
+ r = ep->wMaxPacketSize;
+
+out:
+ libusb_free_config_descriptor(config);
+ return r;
+}
+
+/** \ingroup dev
+ * Calculate the maximum packet size which a specific endpoint is capable is
+ * sending or receiving in the duration of 1 microframe
+ *
+ * Only the active configuration is examined. The calculation is based on the
+ * wMaxPacketSize field in the endpoint descriptor as described in section
+ * 9.6.6 in the USB 2.0 specifications.
+ *
+ * If acting on an isochronous or interrupt endpoint, this function will
+ * multiply the value found in bits 0:10 by the number of transactions per
+ * microframe (determined by bits 11:12). Otherwise, this function just
+ * returns the numeric value found in bits 0:10.
+ *
+ * This function is useful for setting up isochronous transfers, for example
+ * you might pass the return value from this function to
+ * libusb_set_iso_packet_lengths() in order to set the length field of every
+ * isochronous packet in a transfer.
+ *
+ * Since v1.0.3.
+ *
+ * \param dev a device
+ * \param endpoint address of the endpoint in question
+ * \returns the maximum packet size which can be sent/received on this endpoint
+ * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
+ * \returns LIBUSB_ERROR_OTHER on other failure
+ */
+int API_EXPORTED libusb_get_max_iso_packet_size(libusb_device *dev,
+ unsigned char endpoint)
+{
+ struct libusb_config_descriptor *config;
+ const struct libusb_endpoint_descriptor *ep;
+ enum libusb_transfer_type ep_type;
+ uint16_t val;
+ int r;
+
+ r = libusb_get_active_config_descriptor(dev, &config);
+ if (r < 0) {
+ usbi_err(DEVICE_CTX(dev),
+ "could not retrieve active config descriptor");
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ ep = find_endpoint(config, endpoint);
+ if (!ep) {
+ r = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
+
+ val = ep->wMaxPacketSize;
+ ep_type = (enum libusb_transfer_type) (ep->bmAttributes & 0x3);
+
+ r = val & 0x07ff;
+ if (ep_type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS
+ || ep_type == LIBUSB_TRANSFER_TYPE_INTERRUPT)
+ r *= (1 + ((val >> 11) & 3));
+
+out:
+ libusb_free_config_descriptor(config);
+ return r;
+}
+
+/** \ingroup dev
+ * Increment the reference count of a device.
+ * \param dev the device to reference
+ * \returns the same device
+ */
+DEFAULT_VISIBILITY
+libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev)
+{
+ usbi_mutex_lock(&dev->lock);
+ dev->refcnt++;
+ usbi_mutex_unlock(&dev->lock);
+ return dev;
+}
+
+/** \ingroup dev
+ * Decrement the reference count of a device. If the decrement operation
+ * causes the reference count to reach zero, the device shall be destroyed.
+ * \param dev the device to unreference
+ */
+void API_EXPORTED libusb_unref_device(libusb_device *dev)
+{
+ int refcnt;
+
+ if (!dev)
+ return;
+
+ usbi_mutex_lock(&dev->lock);
+ refcnt = --dev->refcnt;
+ usbi_mutex_unlock(&dev->lock);
+
+ if (refcnt == 0) {
+ usbi_dbg("destroy device %d.%d", dev->bus_number, dev->device_address);
+
+ libusb_unref_device(dev->parent_dev);
+
+ if (usbi_backend->destroy_device)
+ usbi_backend->destroy_device(dev);
+
+ if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ /* backend does not support hotplug */
+ usbi_disconnect_device(dev);
+ }
+
+ usbi_mutex_destroy(&dev->lock);
+ free(dev);
+ }
+}
+
+/*
+ * Signal the event pipe so that the event handling thread will be
+ * interrupted to process an internal event.
+ */
+int usbi_signal_event(struct libusb_context *ctx)
+{
+ unsigned char dummy = 1;
+ ssize_t r;
+
+ /* write some data on event pipe to interrupt event handlers */
+ r = usbi_write(ctx->event_pipe[1], &dummy, sizeof(dummy));
+ if (r != sizeof(dummy)) {
+ usbi_warn(ctx, "internal signalling write failed");
+ return LIBUSB_ERROR_IO;
+ }
+
+ return 0;
+}
+
+/*
+ * Clear the event pipe so that the event handling will no longer be
+ * interrupted.
+ */
+int usbi_clear_event(struct libusb_context *ctx)
+{
+ unsigned char dummy;
+ ssize_t r;
+
+ /* read some data on event pipe to clear it */
+ r = usbi_read(ctx->event_pipe[0], &dummy, sizeof(dummy));
+ if (r != sizeof(dummy)) {
+ usbi_warn(ctx, "internal signalling read failed");
+ return LIBUSB_ERROR_IO;
+ }
+
+ return 0;
+}
+
+/** \ingroup dev
+ * Open a device and obtain a device handle. A handle allows you to perform
+ * I/O on the device in question.
+ *
+ * Internally, this function adds a reference to the device and makes it
+ * available to you through libusb_get_device(). This reference is removed
+ * during libusb_close().
+ *
+ * This is a non-blocking function; no requests are sent over the bus.
+ *
+ * \param dev the device to open
+ * \param handle output location for the returned device handle pointer. Only
+ * populated when the return code is 0.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NO_MEM on memory allocation failure
+ * \returns LIBUSB_ERROR_ACCESS if the user has insufficient permissions
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_open(libusb_device *dev,
+ libusb_device_handle **handle)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ struct libusb_device_handle *_handle;
+ size_t priv_size = usbi_backend->device_handle_priv_size;
+ int r;
+ usbi_dbg("open %d.%d", dev->bus_number, dev->device_address);
+
+ if (!dev->attached) {
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ _handle = malloc(sizeof(*_handle) + priv_size);
+ if (!_handle)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = usbi_mutex_init(&_handle->lock, NULL);
+ if (r) {
+ free(_handle);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ _handle->dev = libusb_ref_device(dev);
+ _handle->auto_detach_kernel_driver = 0;
+ _handle->claimed_interfaces = 0;
+ memset(&_handle->os_priv, 0, priv_size);
+
+ r = usbi_backend->open(_handle);
+ if (r < 0) {
+ usbi_dbg("open %d.%d returns %d", dev->bus_number, dev->device_address, r);
+ libusb_unref_device(dev);
+ usbi_mutex_destroy(&_handle->lock);
+ free(_handle);
+ return r;
+ }
+
+ usbi_mutex_lock(&ctx->open_devs_lock);
+ list_add(&_handle->list, &ctx->open_devs);
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ *handle = _handle;
+
+ return 0;
+}
+
+/** \ingroup dev
+ * Convenience function for finding a device with a particular
+ * <tt>idVendor</tt>/<tt>idProduct</tt> combination. This function is intended
+ * for those scenarios where you are using libusb to knock up a quick test
+ * application - it allows you to avoid calling libusb_get_device_list() and
+ * worrying about traversing/freeing the list.
+ *
+ * This function has limitations and is hence not intended for use in real
+ * applications: if multiple devices have the same IDs it will only
+ * give you the first one, etc.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param vendor_id the idVendor value to search for
+ * \param product_id the idProduct value to search for
+ * \returns a handle for the first found device, or NULL on error or if the
+ * device could not be found. */
+DEFAULT_VISIBILITY
+libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid(
+ libusb_context *ctx, uint16_t vendor_id, uint16_t product_id)
+{
+ struct libusb_device **devs;
+ struct libusb_device *found = NULL;
+ struct libusb_device *dev;
+ struct libusb_device_handle *handle = NULL;
+ size_t i = 0;
+ int r;
+
+ if (libusb_get_device_list(ctx, &devs) < 0)
+ return NULL;
+
+ while ((dev = devs[i++]) != NULL) {
+ struct libusb_device_descriptor desc;
+ r = libusb_get_device_descriptor(dev, &desc);
+ if (r < 0)
+ goto out;
+ if (desc.idVendor == vendor_id && desc.idProduct == product_id) {
+ found = dev;
+ break;
+ }
+ }
+
+ if (found) {
+ r = libusb_open(found, &handle);
+ if (r < 0)
+ handle = NULL;
+ }
+
+out:
+ libusb_free_device_list(devs, 1);
+ return handle;
+}
+
+static void do_close(struct libusb_context *ctx,
+ struct libusb_device_handle *dev_handle)
+{
+ struct usbi_transfer *itransfer;
+ struct usbi_transfer *tmp;
+
+ libusb_lock_events(ctx);
+
+ /* remove any transfers in flight that are for this device */
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+
+ /* safe iteration because transfers may be being deleted */
+ list_for_each_entry_safe(itransfer, tmp, &ctx->flying_transfers, list, struct usbi_transfer) {
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ if (transfer->dev_handle != dev_handle)
+ continue;
+
+ if (!(itransfer->flags & USBI_TRANSFER_DEVICE_DISAPPEARED)) {
+ usbi_err(ctx, "Device handle closed while transfer was still being processed, but the device is still connected as far as we know");
+
+ if (itransfer->flags & USBI_TRANSFER_CANCELLING)
+ usbi_warn(ctx, "A cancellation for an in-flight transfer hasn't completed but closing the device handle");
+ else
+ usbi_err(ctx, "A cancellation hasn't even been scheduled on the transfer for which the device is closing");
+ }
+
+ /* remove from the list of in-flight transfers and make sure
+ * we don't accidentally use the device handle in the future
+ * (or that such accesses will be easily caught and identified as a crash)
+ */
+ usbi_mutex_lock(&itransfer->lock);
+ list_del(&itransfer->list);
+ transfer->dev_handle = NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+
+ /* it is up to the user to free up the actual transfer struct. this is
+ * just making sure that we don't attempt to process the transfer after
+ * the device handle is invalid
+ */
+ usbi_dbg("Removed transfer %p from the in-flight list because device handle %p closed",
+ transfer, dev_handle);
+ }
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ libusb_unlock_events(ctx);
+
+ usbi_mutex_lock(&ctx->open_devs_lock);
+ list_del(&dev_handle->list);
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+
+ usbi_backend->close(dev_handle);
+ libusb_unref_device(dev_handle->dev);
+ usbi_mutex_destroy(&dev_handle->lock);
+ free(dev_handle);
+}
+
+/** \ingroup dev
+ * Close a device handle. Should be called on all open handles before your
+ * application exits.
+ *
+ * Internally, this function destroys the reference that was added by
+ * libusb_open() on the given device.
+ *
+ * This is a non-blocking function; no requests are sent over the bus.
+ *
+ * \param dev_handle the handle to close
+ */
+void API_EXPORTED libusb_close(libusb_device_handle *dev_handle)
+{
+ struct libusb_context *ctx;
+ int pending_events;
+
+ if (!dev_handle)
+ return;
+ usbi_dbg("");
+
+ ctx = HANDLE_CTX(dev_handle);
+
+ /* Similarly to libusb_open(), we want to interrupt all event handlers
+ * at this point. More importantly, we want to perform the actual close of
+ * the device while holding the event handling lock (preventing any other
+ * thread from doing event handling) because we will be removing a file
+ * descriptor from the polling loop. */
+
+ /* Record that we are closing a device.
+ * Only signal an event if there are no prior pending events. */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ pending_events = usbi_pending_events(ctx);
+ ctx->device_close++;
+ if (!pending_events)
+ usbi_signal_event(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ /* take event handling lock */
+ libusb_lock_events(ctx);
+
+ /* Close the device */
+ do_close(ctx, dev_handle);
+
+ /* We're done with closing this device.
+ * Clear the event pipe if there are no further pending events. */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ ctx->device_close--;
+ pending_events = usbi_pending_events(ctx);
+ if (!pending_events)
+ usbi_clear_event(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ /* Release event handling lock and wake up event waiters */
+ libusb_unlock_events(ctx);
+}
+
+/** \ingroup dev
+ * Get the underlying device for a handle. This function does not modify
+ * the reference count of the returned device, so do not feel compelled to
+ * unreference it when you are done.
+ * \param dev_handle a device handle
+ * \returns the underlying device
+ */
+DEFAULT_VISIBILITY
+libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle)
+{
+ return dev_handle->dev;
+}
+
+/** \ingroup dev
+ * Determine the bConfigurationValue of the currently active configuration.
+ *
+ * You could formulate your own control request to obtain this information,
+ * but this function has the advantage that it may be able to retrieve the
+ * information from operating system caches (no I/O involved).
+ *
+ * If the OS does not cache this information, then this function will block
+ * while a control transfer is submitted to retrieve the information.
+ *
+ * This function will return a value of 0 in the <tt>config</tt> output
+ * parameter if the device is in unconfigured state.
+ *
+ * \param dev a device handle
+ * \param config output location for the bConfigurationValue of the active
+ * configuration (only valid for return code 0)
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_get_configuration(libusb_device_handle *dev,
+ int *config)
+{
+ int r = LIBUSB_ERROR_NOT_SUPPORTED;
+
+ usbi_dbg("");
+ if (usbi_backend->get_configuration)
+ r = usbi_backend->get_configuration(dev, config);
+
+ if (r == LIBUSB_ERROR_NOT_SUPPORTED) {
+ uint8_t tmp = 0;
+ usbi_dbg("falling back to control message");
+ r = libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
+ LIBUSB_REQUEST_GET_CONFIGURATION, 0, 0, &tmp, 1, 1000);
+ if (r == 0) {
+ usbi_err(HANDLE_CTX(dev), "zero bytes returned in ctrl transfer?");
+ r = LIBUSB_ERROR_IO;
+ } else if (r == 1) {
+ r = 0;
+ *config = tmp;
+ } else {
+ usbi_dbg("control failed, error %d", r);
+ }
+ }
+
+ if (r == 0)
+ usbi_dbg("active config %d", *config);
+
+ return r;
+}
+
+/** \ingroup dev
+ * Set the active configuration for a device.
+ *
+ * The operating system may or may not have already set an active
+ * configuration on the device. It is up to your application to ensure the
+ * correct configuration is selected before you attempt to claim interfaces
+ * and perform other operations.
+ *
+ * If you call this function on a device already configured with the selected
+ * configuration, then this function will act as a lightweight device reset:
+ * it will issue a SET_CONFIGURATION request using the current configuration,
+ * causing most USB-related device state to be reset (altsetting reset to zero,
+ * endpoint halts cleared, toggles reset).
+ *
+ * You cannot change/reset configuration if your application has claimed
+ * interfaces. It is advised to set the desired configuration before claiming
+ * interfaces.
+ *
+ * Alternatively you can call libusb_release_interface() first. Note if you
+ * do things this way you must ensure that auto_detach_kernel_driver for
+ * <tt>dev</tt> is 0, otherwise the kernel driver will be re-attached when you
+ * release the interface(s).
+ *
+ * You cannot change/reset configuration if other applications or drivers have
+ * claimed interfaces.
+ *
+ * A configuration value of -1 will put the device in unconfigured state.
+ * The USB specifications state that a configuration value of 0 does this,
+ * however buggy devices exist which actually have a configuration 0.
+ *
+ * You should always use this function rather than formulating your own
+ * SET_CONFIGURATION control request. This is because the underlying operating
+ * system needs to know when such changes happen.
+ *
+ * This is a blocking function.
+ *
+ * \param dev a device handle
+ * \param configuration the bConfigurationValue of the configuration you
+ * wish to activate, or -1 if you wish to put the device in an unconfigured
+ * state
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the requested configuration does not exist
+ * \returns LIBUSB_ERROR_BUSY if interfaces are currently claimed
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ * \see libusb_set_auto_detach_kernel_driver()
+ */
+int API_EXPORTED libusb_set_configuration(libusb_device_handle *dev,
+ int configuration)
+{
+ usbi_dbg("configuration %d", configuration);
+ return usbi_backend->set_configuration(dev, configuration);
+}
+
+/** \ingroup dev
+ * Claim an interface on a given device handle. You must claim the interface
+ * you wish to use before you can perform I/O on any of its endpoints.
+ *
+ * It is legal to attempt to claim an already-claimed interface, in which
+ * case libusb just returns 0 without doing anything.
+ *
+ * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel driver
+ * will be detached if necessary, on failure the detach error is returned.
+ *
+ * Claiming of interfaces is a purely logical operation; it does not cause
+ * any requests to be sent over the bus. Interface claiming is used to
+ * instruct the underlying operating system that your application wishes
+ * to take ownership of the interface.
+ *
+ * This is a non-blocking function.
+ *
+ * \param dev a device handle
+ * \param interface_number the <tt>bInterfaceNumber</tt> of the interface you
+ * wish to claim
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the requested interface does not exist
+ * \returns LIBUSB_ERROR_BUSY if another program or driver has claimed the
+ * interface
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns a LIBUSB_ERROR code on other failure
+ * \see libusb_set_auto_detach_kernel_driver()
+ */
+int API_EXPORTED libusb_claim_interface(libusb_device_handle *dev,
+ int interface_number)
+{
+ int r = 0;
+
+ usbi_dbg("interface %d", interface_number);
+ if (interface_number >= USB_MAXINTERFACES)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_mutex_lock(&dev->lock);
+ if (dev->claimed_interfaces & (1 << interface_number))
+ goto out;
+
+ r = usbi_backend->claim_interface(dev, interface_number);
+ if (r == 0)
+ dev->claimed_interfaces |= 1 << interface_number;
+
+out:
+ usbi_mutex_unlock(&dev->lock);
+ return r;
+}
+
+/** \ingroup dev
+ * Release an interface previously claimed with libusb_claim_interface(). You
+ * should release all claimed interfaces before closing a device handle.
+ *
+ * This is a blocking function. A SET_INTERFACE control request will be sent
+ * to the device, resetting interface state to the first alternate setting.
+ *
+ * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel
+ * driver will be re-attached after releasing the interface.
+ *
+ * \param dev a device handle
+ * \param interface_number the <tt>bInterfaceNumber</tt> of the
+ * previously-claimed interface
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ * \see libusb_set_auto_detach_kernel_driver()
+ */
+int API_EXPORTED libusb_release_interface(libusb_device_handle *dev,
+ int interface_number)
+{
+ int r;
+
+ usbi_dbg("interface %d", interface_number);
+ if (interface_number >= USB_MAXINTERFACES)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ usbi_mutex_lock(&dev->lock);
+ if (!(dev->claimed_interfaces & (1 << interface_number))) {
+ r = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
+
+ r = usbi_backend->release_interface(dev, interface_number);
+ if (r == 0)
+ dev->claimed_interfaces &= ~(1 << interface_number);
+
+out:
+ usbi_mutex_unlock(&dev->lock);
+ return r;
+}
+
+/** \ingroup dev
+ * Activate an alternate setting for an interface. The interface must have
+ * been previously claimed with libusb_claim_interface().
+ *
+ * You should always use this function rather than formulating your own
+ * SET_INTERFACE control request. This is because the underlying operating
+ * system needs to know when such changes happen.
+ *
+ * This is a blocking function.
+ *
+ * \param dev a device handle
+ * \param interface_number the <tt>bInterfaceNumber</tt> of the
+ * previously-claimed interface
+ * \param alternate_setting the <tt>bAlternateSetting</tt> of the alternate
+ * setting to activate
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed, or the
+ * requested alternate setting does not exist
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_set_interface_alt_setting(libusb_device_handle *dev,
+ int interface_number, int alternate_setting)
+{
+ usbi_dbg("interface %d altsetting %d",
+ interface_number, alternate_setting);
+ if (interface_number >= USB_MAXINTERFACES)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ usbi_mutex_lock(&dev->lock);
+ if (!dev->dev->attached) {
+ usbi_mutex_unlock(&dev->lock);
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ if (!(dev->claimed_interfaces & (1 << interface_number))) {
+ usbi_mutex_unlock(&dev->lock);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ usbi_mutex_unlock(&dev->lock);
+
+ return usbi_backend->set_interface_altsetting(dev, interface_number,
+ alternate_setting);
+}
+
+/** \ingroup dev
+ * Clear the halt/stall condition for an endpoint. Endpoints with halt status
+ * are unable to receive or transmit data until the halt condition is stalled.
+ *
+ * You should cancel all pending transfers before attempting to clear the halt
+ * condition.
+ *
+ * This is a blocking function.
+ *
+ * \param dev a device handle
+ * \param endpoint the endpoint to clear halt status
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_clear_halt(libusb_device_handle *dev,
+ unsigned char endpoint)
+{
+ usbi_dbg("endpoint %x", endpoint);
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ return usbi_backend->clear_halt(dev, endpoint);
+}
+
+/** \ingroup dev
+ * Perform a USB port reset to reinitialize a device. The system will attempt
+ * to restore the previous configuration and alternate settings after the
+ * reset has completed.
+ *
+ * If the reset fails, the descriptors change, or the previous state cannot be
+ * restored, the device will appear to be disconnected and reconnected. This
+ * means that the device handle is no longer valid (you should close it) and
+ * rediscover the device. A return code of LIBUSB_ERROR_NOT_FOUND indicates
+ * when this is the case.
+ *
+ * This is a blocking function which usually incurs a noticeable delay.
+ *
+ * \param dev a handle of the device to reset
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if re-enumeration is required, or if the
+ * device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_reset_device(libusb_device_handle *dev)
+{
+ usbi_dbg("");
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ return usbi_backend->reset_device(dev);
+}
+
+/** \ingroup asyncio
+ * Allocate up to num_streams usb bulk streams on the specified endpoints. This
+ * function takes an array of endpoints rather then a single endpoint because
+ * some protocols require that endpoints are setup with similar stream ids.
+ * All endpoints passed in must belong to the same interface.
+ *
+ * Note this function may return less streams then requested. Also note that the
+ * same number of streams are allocated for each endpoint in the endpoint array.
+ *
+ * Stream id 0 is reserved, and should not be used to communicate with devices.
+ * If libusb_alloc_streams() returns with a value of N, you may use stream ids
+ * 1 to N.
+ *
+ * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
+ *
+ * \param dev a device handle
+ * \param num_streams number of streams to try to allocate
+ * \param endpoints array of endpoints to allocate streams on
+ * \param num_endpoints length of the endpoints array
+ * \returns number of streams allocated, or a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_alloc_streams(libusb_device_handle *dev,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints)
+{
+ usbi_dbg("streams %u eps %d", (unsigned) num_streams, num_endpoints);
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ if (usbi_backend->alloc_streams)
+ return usbi_backend->alloc_streams(dev, num_streams, endpoints,
+ num_endpoints);
+ else
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+/** \ingroup asyncio
+ * Free usb bulk streams allocated with libusb_alloc_streams().
+ *
+ * Note streams are automatically free-ed when releasing an interface.
+ *
+ * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
+ *
+ * \param dev a device handle
+ * \param endpoints array of endpoints to free streams on
+ * \param num_endpoints length of the endpoints array
+ * \returns LIBUSB_SUCCESS, or a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_free_streams(libusb_device_handle *dev,
+ unsigned char *endpoints, int num_endpoints)
+{
+ usbi_dbg("eps %d", num_endpoints);
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ if (usbi_backend->free_streams)
+ return usbi_backend->free_streams(dev, endpoints,
+ num_endpoints);
+ else
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+/** \ingroup dev
+ * Determine if a kernel driver is active on an interface. If a kernel driver
+ * is active, you cannot claim the interface, and libusb will be unable to
+ * perform I/O.
+ *
+ * This functionality is not available on Windows.
+ *
+ * \param dev a device handle
+ * \param interface_number the interface to check
+ * \returns 0 if no kernel driver is active
+ * \returns 1 if a kernel driver is active
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
+ * is not available
+ * \returns another LIBUSB_ERROR code on other failure
+ * \see libusb_detach_kernel_driver()
+ */
+int API_EXPORTED libusb_kernel_driver_active(libusb_device_handle *dev,
+ int interface_number)
+{
+ usbi_dbg("interface %d", interface_number);
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ if (usbi_backend->kernel_driver_active)
+ return usbi_backend->kernel_driver_active(dev, interface_number);
+ else
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+/** \ingroup dev
+ * Detach a kernel driver from an interface. If successful, you will then be
+ * able to claim the interface and perform I/O.
+ *
+ * This functionality is not available on Darwin or Windows.
+ *
+ * Note that libusb itself also talks to the device through a special kernel
+ * driver, if this driver is already attached to the device, this call will
+ * not detach it and return LIBUSB_ERROR_NOT_FOUND.
+ *
+ * \param dev a device handle
+ * \param interface_number the interface to detach the driver from
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
+ * is not available
+ * \returns another LIBUSB_ERROR code on other failure
+ * \see libusb_kernel_driver_active()
+ */
+int API_EXPORTED libusb_detach_kernel_driver(libusb_device_handle *dev,
+ int interface_number)
+{
+ usbi_dbg("interface %d", interface_number);
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ if (usbi_backend->detach_kernel_driver)
+ return usbi_backend->detach_kernel_driver(dev, interface_number);
+ else
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+/** \ingroup dev
+ * Re-attach an interface's kernel driver, which was previously detached
+ * using libusb_detach_kernel_driver(). This call is only effective on
+ * Linux and returns LIBUSB_ERROR_NOT_SUPPORTED on all other platforms.
+ *
+ * This functionality is not available on Darwin or Windows.
+ *
+ * \param dev a device handle
+ * \param interface_number the interface to attach the driver from
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
+ * is not available
+ * \returns LIBUSB_ERROR_BUSY if the driver cannot be attached because the
+ * interface is claimed by a program or driver
+ * \returns another LIBUSB_ERROR code on other failure
+ * \see libusb_kernel_driver_active()
+ */
+int API_EXPORTED libusb_attach_kernel_driver(libusb_device_handle *dev,
+ int interface_number)
+{
+ usbi_dbg("interface %d", interface_number);
+
+ if (!dev->dev->attached)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ if (usbi_backend->attach_kernel_driver)
+ return usbi_backend->attach_kernel_driver(dev, interface_number);
+ else
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+/** \ingroup dev
+ * Enable/disable libusb's automatic kernel driver detachment. When this is
+ * enabled libusb will automatically detach the kernel driver on an interface
+ * when claiming the interface, and attach it when releasing the interface.
+ *
+ * Automatic kernel driver detachment is disabled on newly opened device
+ * handles by default.
+ *
+ * On platforms which do not have LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER
+ * this function will return LIBUSB_ERROR_NOT_SUPPORTED, and libusb will
+ * continue as if this function was never called.
+ *
+ * \param dev a device handle
+ * \param enable whether to enable or disable auto kernel driver detachment
+ *
+ * \returns LIBUSB_SUCCESS on success
+ * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
+ * is not available
+ * \see libusb_claim_interface()
+ * \see libusb_release_interface()
+ * \see libusb_set_configuration()
+ */
+int API_EXPORTED libusb_set_auto_detach_kernel_driver(
+ libusb_device_handle *dev, int enable)
+{
+ if (!(usbi_backend->caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER))
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+
+ dev->auto_detach_kernel_driver = enable;
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup lib
+ * Set log message verbosity.
+ *
+ * The default level is LIBUSB_LOG_LEVEL_NONE, which means no messages are ever
+ * printed. If you choose to increase the message verbosity level, ensure
+ * that your application does not close the stdout/stderr file descriptors.
+ *
+ * You are advised to use level LIBUSB_LOG_LEVEL_WARNING. libusb is conservative
+ * with its message logging and most of the time, will only log messages that
+ * explain error conditions and other oddities. This will help you debug
+ * your software.
+ *
+ * If the LIBUSB_DEBUG environment variable was set when libusb was
+ * initialized, this function does nothing: the message verbosity is fixed
+ * to the value in the environment variable.
+ *
+ * If libusb was compiled without any message logging, this function does
+ * nothing: you'll never get any messages.
+ *
+ * If libusb was compiled with verbose debug message logging, this function
+ * does nothing: you'll always get messages from all levels.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param level debug level to set
+ */
+void API_EXPORTED libusb_set_debug(libusb_context *ctx, int level)
+{
+ USBI_GET_CONTEXT(ctx);
+ if (!ctx->debug_fixed)
+ ctx->debug = level;
+}
+
+/** \ingroup lib
+ * Initialize libusb. This function must be called before calling any other
+ * libusb function.
+ *
+ * If you do not provide an output location for a context pointer, a default
+ * context will be created. If there was already a default context, it will
+ * be reused (and nothing will be initialized/reinitialized).
+ *
+ * \param context Optional output location for context pointer.
+ * Only valid on return code 0.
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ * \see contexts
+ */
+int API_EXPORTED libusb_init(libusb_context **context)
+{
+ struct libusb_device *dev, *next;
+ char *dbg = getenv("LIBUSB_DEBUG");
+ struct libusb_context *ctx;
+ static int first_init = 1;
+ int r = 0;
+
+ usbi_mutex_static_lock(&default_context_lock);
+
+ if (!timestamp_origin.tv_sec) {
+ usbi_gettimeofday(×tamp_origin, NULL);
+ }
+
+ if (!context && usbi_default_context) {
+ usbi_dbg("reusing default context");
+ default_context_refcnt++;
+ usbi_mutex_static_unlock(&default_context_lock);
+ return 0;
+ }
+
+ ctx = calloc(1, sizeof(*ctx));
+ if (!ctx) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err_unlock;
+ }
+
+#ifdef ENABLE_DEBUG_LOGGING
+ ctx->debug = LIBUSB_LOG_LEVEL_DEBUG;
+#endif
+
+ if (dbg) {
+ ctx->debug = atoi(dbg);
+ if (ctx->debug)
+ ctx->debug_fixed = 1;
+ }
+
+ /* default context should be initialized before calling usbi_dbg */
+ if (!usbi_default_context) {
+ usbi_default_context = ctx;
+ default_context_refcnt++;
+ usbi_dbg("created default context");
+ }
+
+ usbi_dbg("libusb v%u.%u.%u.%u%s", libusb_version_internal.major, libusb_version_internal.minor,
+ libusb_version_internal.micro, libusb_version_internal.nano, libusb_version_internal.rc);
+
+ usbi_mutex_init(&ctx->usb_devs_lock, NULL);
+ usbi_mutex_init(&ctx->open_devs_lock, NULL);
+ usbi_mutex_init(&ctx->hotplug_cbs_lock, NULL);
+ list_init(&ctx->usb_devs);
+ list_init(&ctx->open_devs);
+ list_init(&ctx->hotplug_cbs);
+
+ usbi_mutex_static_lock(&active_contexts_lock);
+ if (first_init) {
+ first_init = 0;
+ list_init (&active_contexts_list);
+ }
+ list_add (&ctx->list, &active_contexts_list);
+ usbi_mutex_static_unlock(&active_contexts_lock);
+
+ if (usbi_backend->init) {
+ r = usbi_backend->init(ctx);
+ if (r)
+ goto err_free_ctx;
+ }
+
+ r = usbi_io_init(ctx);
+ if (r < 0)
+ goto err_backend_exit;
+
+ usbi_mutex_static_unlock(&default_context_lock);
+
+ if (context)
+ *context = ctx;
+
+ return 0;
+
+err_backend_exit:
+ if (usbi_backend->exit)
+ usbi_backend->exit();
+err_free_ctx:
+ if (ctx == usbi_default_context) {
+ usbi_default_context = NULL;
+ default_context_refcnt--;
+ }
+
+ usbi_mutex_static_lock(&active_contexts_lock);
+ list_del (&ctx->list);
+ usbi_mutex_static_unlock(&active_contexts_lock);
+
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) {
+ list_del(&dev->list);
+ libusb_unref_device(dev);
+ }
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+
+ usbi_mutex_destroy(&ctx->open_devs_lock);
+ usbi_mutex_destroy(&ctx->usb_devs_lock);
+ usbi_mutex_destroy(&ctx->hotplug_cbs_lock);
+
+ free(ctx);
+err_unlock:
+ usbi_mutex_static_unlock(&default_context_lock);
+ return r;
+}
+
+/** \ingroup lib
+ * Deinitialize libusb. Should be called after closing all open devices and
+ * before your application terminates.
+ * \param ctx the context to deinitialize, or NULL for the default context
+ */
+void API_EXPORTED libusb_exit(struct libusb_context *ctx)
+{
+ struct libusb_device *dev, *next;
+ struct timeval tv = { 0, 0 };
+
+ usbi_dbg("");
+ USBI_GET_CONTEXT(ctx);
+
+ /* if working with default context, only actually do the deinitialization
+ * if we're the last user */
+ usbi_mutex_static_lock(&default_context_lock);
+ if (ctx == usbi_default_context) {
+ if (--default_context_refcnt > 0) {
+ usbi_dbg("not destroying default context");
+ usbi_mutex_static_unlock(&default_context_lock);
+ return;
+ }
+ usbi_dbg("destroying default context");
+ usbi_default_context = NULL;
+ }
+ usbi_mutex_static_unlock(&default_context_lock);
+
+ usbi_mutex_static_lock(&active_contexts_lock);
+ list_del (&ctx->list);
+ usbi_mutex_static_unlock(&active_contexts_lock);
+
+ if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ usbi_hotplug_deregister_all(ctx);
+
+ /*
+ * Ensure any pending unplug events are read from the hotplug
+ * pipe. The usb_device-s hold in the events are no longer part
+ * of usb_devs, but the events still hold a reference!
+ *
+ * Note we don't do this if the application has left devices
+ * open (which implies a buggy app) to avoid packet completion
+ * handlers running when the app does not expect them to run.
+ */
+ if (list_empty(&ctx->open_devs))
+ libusb_handle_events_timeout(ctx, &tv);
+
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) {
+ list_del(&dev->list);
+ libusb_unref_device(dev);
+ }
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+ }
+
+ /* a few sanity checks. don't bother with locking because unless
+ * there is an application bug, nobody will be accessing these. */
+ if (!list_empty(&ctx->usb_devs))
+ usbi_warn(ctx, "some libusb_devices were leaked");
+ if (!list_empty(&ctx->open_devs))
+ usbi_warn(ctx, "application left some devices open");
+
+ usbi_io_exit(ctx);
+ if (usbi_backend->exit)
+ usbi_backend->exit();
+
+ usbi_mutex_destroy(&ctx->open_devs_lock);
+ usbi_mutex_destroy(&ctx->usb_devs_lock);
+ usbi_mutex_destroy(&ctx->hotplug_cbs_lock);
+ free(ctx);
+}
+
+/** \ingroup misc
+ * Check at runtime if the loaded library has a given capability.
+ * This call should be performed after \ref libusb_init(), to ensure the
+ * backend has updated its capability set.
+ *
+ * \param capability the \ref libusb_capability to check for
+ * \returns nonzero if the running library has the capability, 0 otherwise
+ */
+int API_EXPORTED libusb_has_capability(uint32_t capability)
+{
+ switch (capability) {
+ case LIBUSB_CAP_HAS_CAPABILITY:
+ return 1;
+ case LIBUSB_CAP_HAS_HOTPLUG:
+ return !(usbi_backend->get_device_list);
+ case LIBUSB_CAP_HAS_HID_ACCESS:
+ return (usbi_backend->caps & USBI_CAP_HAS_HID_ACCESS);
+ case LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER:
+ return (usbi_backend->caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER);
+ }
+ return 0;
+}
+
+/* this is defined in libusbi.h if needed */
+#ifdef LIBUSB_GETTIMEOFDAY_WIN32
+/*
+ * gettimeofday
+ * Implementation according to:
+ * The Open Group Base Specifications Issue 6
+ * IEEE Std 1003.1, 2004 Edition
+ */
+
+/*
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ *
+ * This code is distributed in the hope that it will be useful but
+ * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
+ * DISCLAIMED. This includes but is not limited to warranties of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Contributed by:
+ * Danny Smith <dannysmith@users.sourceforge.net>
+ */
+
+/* Offset between 1/1/1601 and 1/1/1970 in 100 nanosec units */
+#define _W32_FT_OFFSET (116444736000000000)
+
+int usbi_gettimeofday(struct timeval *tp, void *tzp)
+{
+ union {
+ unsigned __int64 ns100; /* Time since 1 Jan 1601, in 100ns units */
+ FILETIME ft;
+ } _now;
+ UNUSED(tzp);
+
+ if(tp) {
+#if defined(OS_WINCE)
+ SYSTEMTIME st;
+ GetSystemTime(&st);
+ SystemTimeToFileTime(&st, &_now.ft);
+#else
+ GetSystemTimeAsFileTime (&_now.ft);
+#endif
+ tp->tv_usec=(long)((_now.ns100 / 10) % 1000000 );
+ tp->tv_sec= (long)((_now.ns100 - _W32_FT_OFFSET) / 10000000);
+ }
+ /* Always return 0 as per Open Group Base Specifications Issue 6.
+ Do not set errno on error. */
+ return 0;
+}
+#endif
+
+static void usbi_log_str(struct libusb_context *ctx,
+ enum libusb_log_level level, const char * str)
+{
+#if defined(USE_SYSTEM_LOGGING_FACILITY)
+#if defined(OS_WINDOWS) || defined(OS_WINCE)
+ /* Windows CE only supports the Unicode version of OutputDebugString. */
+ WCHAR wbuf[USBI_MAX_LOG_LEN];
+ MultiByteToWideChar(CP_UTF8, 0, str, -1, wbuf, sizeof(wbuf));
+ OutputDebugStringW(wbuf);
+#elif defined(__ANDROID__)
+ int priority = ANDROID_LOG_UNKNOWN;
+ switch (level) {
+ case LIBUSB_LOG_LEVEL_INFO: priority = ANDROID_LOG_INFO; break;
+ case LIBUSB_LOG_LEVEL_WARNING: priority = ANDROID_LOG_WARN; break;
+ case LIBUSB_LOG_LEVEL_ERROR: priority = ANDROID_LOG_ERROR; break;
+ case LIBUSB_LOG_LEVEL_DEBUG: priority = ANDROID_LOG_DEBUG; break;
+ }
+ __android_log_write(priority, "libusb", str);
+#elif defined(HAVE_SYSLOG_FUNC)
+ int syslog_level = LOG_INFO;
+ switch (level) {
+ case LIBUSB_LOG_LEVEL_INFO: syslog_level = LOG_INFO; break;
+ case LIBUSB_LOG_LEVEL_WARNING: syslog_level = LOG_WARNING; break;
+ case LIBUSB_LOG_LEVEL_ERROR: syslog_level = LOG_ERR; break;
+ case LIBUSB_LOG_LEVEL_DEBUG: syslog_level = LOG_DEBUG; break;
+ }
+ syslog(syslog_level, "%s", str);
+#else /* All of gcc, Clang, XCode seem to use #warning */
+#warning System logging is not supported on this platform. Logging to stderr will be used instead.
+ fputs(str, stderr);
+#endif
+#else
+ fputs(str, stderr);
+#endif /* USE_SYSTEM_LOGGING_FACILITY */
+ UNUSED(ctx);
+ UNUSED(level);
+}
+
+void usbi_log_v(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, va_list args)
+{
+ const char *prefix = "";
+ char buf[USBI_MAX_LOG_LEN];
+ struct timeval now;
+ int global_debug, header_len, text_len;
+ static int has_debug_header_been_displayed = 0;
+
+#ifdef ENABLE_DEBUG_LOGGING
+ global_debug = 1;
+ UNUSED(ctx);
+#else
+ int ctx_level = 0;
+
+ USBI_GET_CONTEXT(ctx);
+ if (ctx) {
+ ctx_level = ctx->debug;
+ } else {
+ char *dbg = getenv("LIBUSB_DEBUG");
+ if (dbg)
+ ctx_level = atoi(dbg);
+ }
+ global_debug = (ctx_level == LIBUSB_LOG_LEVEL_DEBUG);
+ if (!ctx_level)
+ return;
+ if (level == LIBUSB_LOG_LEVEL_WARNING && ctx_level < LIBUSB_LOG_LEVEL_WARNING)
+ return;
+ if (level == LIBUSB_LOG_LEVEL_INFO && ctx_level < LIBUSB_LOG_LEVEL_INFO)
+ return;
+ if (level == LIBUSB_LOG_LEVEL_DEBUG && ctx_level < LIBUSB_LOG_LEVEL_DEBUG)
+ return;
+#endif
+
+ usbi_gettimeofday(&now, NULL);
+ if ((global_debug) && (!has_debug_header_been_displayed)) {
+ has_debug_header_been_displayed = 1;
+ usbi_log_str(ctx, LIBUSB_LOG_LEVEL_DEBUG, "[timestamp] [threadID] facility level [function call] <message>" USBI_LOG_LINE_END);
+ usbi_log_str(ctx, LIBUSB_LOG_LEVEL_DEBUG, "--------------------------------------------------------------------------------" USBI_LOG_LINE_END);
+ }
+ if (now.tv_usec < timestamp_origin.tv_usec) {
+ now.tv_sec--;
+ now.tv_usec += 1000000;
+ }
+ now.tv_sec -= timestamp_origin.tv_sec;
+ now.tv_usec -= timestamp_origin.tv_usec;
+
+ switch (level) {
+ case LIBUSB_LOG_LEVEL_INFO:
+ prefix = "info";
+ break;
+ case LIBUSB_LOG_LEVEL_WARNING:
+ prefix = "warning";
+ break;
+ case LIBUSB_LOG_LEVEL_ERROR:
+ prefix = "error";
+ break;
+ case LIBUSB_LOG_LEVEL_DEBUG:
+ prefix = "debug";
+ break;
+ case LIBUSB_LOG_LEVEL_NONE:
+ return;
+ default:
+ prefix = "unknown";
+ break;
+ }
+
+ if (global_debug) {
+ header_len = snprintf(buf, sizeof(buf),
+ "[%2d.%06d] [%08x] libusb: %s [%s] ",
+ (int)now.tv_sec, (int)now.tv_usec, usbi_get_tid(), prefix, function);
+ } else {
+ header_len = snprintf(buf, sizeof(buf),
+ "libusb: %s [%s] ", prefix, function);
+ }
+
+ if (header_len < 0 || header_len >= sizeof(buf)) {
+ /* Somehow snprintf failed to write to the buffer,
+ * remove the header so something useful is output. */
+ header_len = 0;
+ }
+ /* Make sure buffer is NUL terminated */
+ buf[header_len] = '\0';
+ text_len = vsnprintf(buf + header_len, sizeof(buf) - header_len,
+ format, args);
+ if (text_len < 0 || text_len + header_len >= sizeof(buf)) {
+ /* Truncated log output. On some platforms a -1 return value means
+ * that the output was truncated. */
+ text_len = sizeof(buf) - header_len;
+ }
+ if (header_len + text_len + sizeof(USBI_LOG_LINE_END) >= sizeof(buf)) {
+ /* Need to truncate the text slightly to fit on the terminator. */
+ text_len -= (header_len + text_len + sizeof(USBI_LOG_LINE_END)) - sizeof(buf);
+ }
+ strcpy(buf + header_len + text_len, USBI_LOG_LINE_END);
+
+ usbi_log_str(ctx, level, buf);
+}
+
+void usbi_log(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, ...)
+{
+ va_list args;
+
+ va_start (args, format);
+ usbi_log_v(ctx, level, function, format, args);
+ va_end (args);
+}
+
+/** \ingroup misc
+ * Returns a constant NULL-terminated string with the ASCII name of a libusb
+ * error or transfer status code. The caller must not free() the returned
+ * string.
+ *
+ * \param error_code The \ref libusb_error or libusb_transfer_status code to
+ * return the name of.
+ * \returns The error name, or the string **UNKNOWN** if the value of
+ * error_code is not a known error / status code.
+ */
+DEFAULT_VISIBILITY const char * LIBUSB_CALL libusb_error_name(int error_code)
+{
+ switch (error_code) {
+ case LIBUSB_ERROR_IO:
+ return "LIBUSB_ERROR_IO";
+ case LIBUSB_ERROR_INVALID_PARAM:
+ return "LIBUSB_ERROR_INVALID_PARAM";
+ case LIBUSB_ERROR_ACCESS:
+ return "LIBUSB_ERROR_ACCESS";
+ case LIBUSB_ERROR_NO_DEVICE:
+ return "LIBUSB_ERROR_NO_DEVICE";
+ case LIBUSB_ERROR_NOT_FOUND:
+ return "LIBUSB_ERROR_NOT_FOUND";
+ case LIBUSB_ERROR_BUSY:
+ return "LIBUSB_ERROR_BUSY";
+ case LIBUSB_ERROR_TIMEOUT:
+ return "LIBUSB_ERROR_TIMEOUT";
+ case LIBUSB_ERROR_OVERFLOW:
+ return "LIBUSB_ERROR_OVERFLOW";
+ case LIBUSB_ERROR_PIPE:
+ return "LIBUSB_ERROR_PIPE";
+ case LIBUSB_ERROR_INTERRUPTED:
+ return "LIBUSB_ERROR_INTERRUPTED";
+ case LIBUSB_ERROR_NO_MEM:
+ return "LIBUSB_ERROR_NO_MEM";
+ case LIBUSB_ERROR_NOT_SUPPORTED:
+ return "LIBUSB_ERROR_NOT_SUPPORTED";
+ case LIBUSB_ERROR_OTHER:
+ return "LIBUSB_ERROR_OTHER";
+
+ case LIBUSB_TRANSFER_ERROR:
+ return "LIBUSB_TRANSFER_ERROR";
+ case LIBUSB_TRANSFER_TIMED_OUT:
+ return "LIBUSB_TRANSFER_TIMED_OUT";
+ case LIBUSB_TRANSFER_CANCELLED:
+ return "LIBUSB_TRANSFER_CANCELLED";
+ case LIBUSB_TRANSFER_STALL:
+ return "LIBUSB_TRANSFER_STALL";
+ case LIBUSB_TRANSFER_NO_DEVICE:
+ return "LIBUSB_TRANSFER_NO_DEVICE";
+ case LIBUSB_TRANSFER_OVERFLOW:
+ return "LIBUSB_TRANSFER_OVERFLOW";
+
+ case 0:
+ return "LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED";
+ default:
+ return "**UNKNOWN**";
+ }
+}
+
+/** \ingroup misc
+ * Returns a pointer to const struct libusb_version with the version
+ * (major, minor, micro, nano and rc) of the running library.
+ */
+DEFAULT_VISIBILITY
+const struct libusb_version * LIBUSB_CALL libusb_get_version(void)
+{
+ return &libusb_version_internal;
+}
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * USB descriptor handling functions for libusb
+ * Copyright © 2007 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <errno.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "libusbi.h"
+
+#define DESC_HEADER_LENGTH 2
+#define DEVICE_DESC_LENGTH 18
+#define CONFIG_DESC_LENGTH 9
+#define INTERFACE_DESC_LENGTH 9
+#define ENDPOINT_DESC_LENGTH 7
+#define ENDPOINT_AUDIO_DESC_LENGTH 9
+
+/** @defgroup desc USB descriptors
+ * This page details how to examine the various standard USB descriptors
+ * for detected devices
+ */
+
+/* set host_endian if the w values are already in host endian format,
+ * as opposed to bus endian. */
+int usbi_parse_descriptor(const unsigned char *source, const char *descriptor,
+ void *dest, int host_endian)
+{
+ const unsigned char *sp = source;
+ unsigned char *dp = dest;
+ uint16_t w;
+ const char *cp;
+ uint32_t d;
+
+ for (cp = descriptor; *cp; cp++) {
+ switch (*cp) {
+ case 'b': /* 8-bit byte */
+ *dp++ = *sp++;
+ break;
+ case 'w': /* 16-bit word, convert from little endian to CPU */
+ dp += ((uintptr_t)dp & 1); /* Align to word boundary */
+
+ if (host_endian) {
+ memcpy(dp, sp, 2);
+ } else {
+ w = (sp[1] << 8) | sp[0];
+ *((uint16_t *)dp) = w;
+ }
+ sp += 2;
+ dp += 2;
+ break;
+ case 'd': /* 32-bit word, convert from little endian to CPU */
+ dp += ((uintptr_t)dp & 1); /* Align to word boundary */
+
+ if (host_endian) {
+ memcpy(dp, sp, 4);
+ } else {
+ d = (sp[3] << 24) | (sp[2] << 16) |
+ (sp[1] << 8) | sp[0];
+ *((uint32_t *)dp) = d;
+ }
+ sp += 4;
+ dp += 4;
+ break;
+ case 'u': /* 16 byte UUID */
+ memcpy(dp, sp, 16);
+ sp += 16;
+ dp += 16;
+ break;
+ }
+ }
+
+ return (int) (sp - source);
+}
+
+static void clear_endpoint(struct libusb_endpoint_descriptor *endpoint)
+{
+ if (endpoint->extra)
+ free((unsigned char *) endpoint->extra);
+}
+
+static int parse_endpoint(struct libusb_context *ctx,
+ struct libusb_endpoint_descriptor *endpoint, unsigned char *buffer,
+ int size, int host_endian)
+{
+ struct usb_descriptor_header header;
+ unsigned char *extra;
+ unsigned char *begin;
+ int parsed = 0;
+ int len;
+
+ if (size < DESC_HEADER_LENGTH) {
+ usbi_err(ctx, "short endpoint descriptor read %d/%d",
+ size, DESC_HEADER_LENGTH);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(buffer, "bb", &header, 0);
+ if (header.bDescriptorType != LIBUSB_DT_ENDPOINT) {
+ usbi_err(ctx, "unexpected descriptor %x (expected %x)",
+ header.bDescriptorType, LIBUSB_DT_ENDPOINT);
+ return parsed;
+ }
+ if (header.bLength > size) {
+ usbi_warn(ctx, "short endpoint descriptor read %d/%d",
+ size, header.bLength);
+ return parsed;
+ }
+ if (header.bLength >= ENDPOINT_AUDIO_DESC_LENGTH)
+ usbi_parse_descriptor(buffer, "bbbbwbbb", endpoint, host_endian);
+ else if (header.bLength >= ENDPOINT_DESC_LENGTH)
+ usbi_parse_descriptor(buffer, "bbbbwb", endpoint, host_endian);
+ else {
+ usbi_err(ctx, "invalid endpoint bLength (%d)", header.bLength);
+ return LIBUSB_ERROR_IO;
+ }
+
+ buffer += header.bLength;
+ size -= header.bLength;
+ parsed += header.bLength;
+
+ /* Skip over the rest of the Class Specific or Vendor Specific */
+ /* descriptors */
+ begin = buffer;
+ while (size >= DESC_HEADER_LENGTH) {
+ usbi_parse_descriptor(buffer, "bb", &header, 0);
+ if (header.bLength < DESC_HEADER_LENGTH) {
+ usbi_err(ctx, "invalid extra ep desc len (%d)",
+ header.bLength);
+ return LIBUSB_ERROR_IO;
+ } else if (header.bLength > size) {
+ usbi_warn(ctx, "short extra ep desc read %d/%d",
+ size, header.bLength);
+ return parsed;
+ }
+
+ /* If we find another "proper" descriptor then we're done */
+ if ((header.bDescriptorType == LIBUSB_DT_ENDPOINT) ||
+ (header.bDescriptorType == LIBUSB_DT_INTERFACE) ||
+ (header.bDescriptorType == LIBUSB_DT_CONFIG) ||
+ (header.bDescriptorType == LIBUSB_DT_DEVICE))
+ break;
+
+ usbi_dbg("skipping descriptor %x", header.bDescriptorType);
+ buffer += header.bLength;
+ size -= header.bLength;
+ parsed += header.bLength;
+ }
+
+ /* Copy any unknown descriptors into a storage area for drivers */
+ /* to later parse */
+ len = (int)(buffer - begin);
+ if (!len) {
+ endpoint->extra = NULL;
+ endpoint->extra_length = 0;
+ return parsed;
+ }
+
+ extra = malloc(len);
+ endpoint->extra = extra;
+ if (!extra) {
+ endpoint->extra_length = 0;
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ memcpy(extra, begin, len);
+ endpoint->extra_length = len;
+
+ return parsed;
+}
+
+static void clear_interface(struct libusb_interface *usb_interface)
+{
+ int i;
+ int j;
+
+ if (usb_interface->altsetting) {
+ for (i = 0; i < usb_interface->num_altsetting; i++) {
+ struct libusb_interface_descriptor *ifp =
+ (struct libusb_interface_descriptor *)
+ usb_interface->altsetting + i;
+ if (ifp->extra)
+ free((void *) ifp->extra);
+ if (ifp->endpoint) {
+ for (j = 0; j < ifp->bNumEndpoints; j++)
+ clear_endpoint((struct libusb_endpoint_descriptor *)
+ ifp->endpoint + j);
+ free((void *) ifp->endpoint);
+ }
+ }
+ free((void *) usb_interface->altsetting);
+ usb_interface->altsetting = NULL;
+ }
+
+}
+
+static int parse_interface(libusb_context *ctx,
+ struct libusb_interface *usb_interface, unsigned char *buffer, int size,
+ int host_endian)
+{
+ int i;
+ int len;
+ int r;
+ int parsed = 0;
+ int interface_number = -1;
+ size_t tmp;
+ struct usb_descriptor_header header;
+ struct libusb_interface_descriptor *ifp;
+ unsigned char *begin;
+
+ usb_interface->num_altsetting = 0;
+
+ while (size >= INTERFACE_DESC_LENGTH) {
+ struct libusb_interface_descriptor *altsetting =
+ (struct libusb_interface_descriptor *) usb_interface->altsetting;
+ altsetting = usbi_reallocf(altsetting,
+ sizeof(struct libusb_interface_descriptor) *
+ (usb_interface->num_altsetting + 1));
+ if (!altsetting) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err;
+ }
+ usb_interface->altsetting = altsetting;
+
+ ifp = altsetting + usb_interface->num_altsetting;
+ usbi_parse_descriptor(buffer, "bbbbbbbbb", ifp, 0);
+ if (ifp->bDescriptorType != LIBUSB_DT_INTERFACE) {
+ usbi_err(ctx, "unexpected descriptor %x (expected %x)",
+ ifp->bDescriptorType, LIBUSB_DT_INTERFACE);
+ return parsed;
+ }
+ if (ifp->bLength < INTERFACE_DESC_LENGTH) {
+ usbi_err(ctx, "invalid interface bLength (%d)",
+ ifp->bLength);
+ r = LIBUSB_ERROR_IO;
+ goto err;
+ }
+ if (ifp->bLength > size) {
+ usbi_warn(ctx, "short intf descriptor read %d/%d",
+ size, ifp->bLength);
+ return parsed;
+ }
+ if (ifp->bNumEndpoints > USB_MAXENDPOINTS) {
+ usbi_err(ctx, "too many endpoints (%d)", ifp->bNumEndpoints);
+ r = LIBUSB_ERROR_IO;
+ goto err;
+ }
+
+ usb_interface->num_altsetting++;
+ ifp->extra = NULL;
+ ifp->extra_length = 0;
+ ifp->endpoint = NULL;
+
+ if (interface_number == -1)
+ interface_number = ifp->bInterfaceNumber;
+
+ /* Skip over the interface */
+ buffer += ifp->bLength;
+ parsed += ifp->bLength;
+ size -= ifp->bLength;
+
+ begin = buffer;
+
+ /* Skip over any interface, class or vendor descriptors */
+ while (size >= DESC_HEADER_LENGTH) {
+ usbi_parse_descriptor(buffer, "bb", &header, 0);
+ if (header.bLength < DESC_HEADER_LENGTH) {
+ usbi_err(ctx,
+ "invalid extra intf desc len (%d)",
+ header.bLength);
+ r = LIBUSB_ERROR_IO;
+ goto err;
+ } else if (header.bLength > size) {
+ usbi_warn(ctx,
+ "short extra intf desc read %d/%d",
+ size, header.bLength);
+ return parsed;
+ }
+
+ /* If we find another "proper" descriptor then we're done */
+ if ((header.bDescriptorType == LIBUSB_DT_INTERFACE) ||
+ (header.bDescriptorType == LIBUSB_DT_ENDPOINT) ||
+ (header.bDescriptorType == LIBUSB_DT_CONFIG) ||
+ (header.bDescriptorType == LIBUSB_DT_DEVICE))
+ break;
+
+ buffer += header.bLength;
+ parsed += header.bLength;
+ size -= header.bLength;
+ }
+
+ /* Copy any unknown descriptors into a storage area for */
+ /* drivers to later parse */
+ len = (int)(buffer - begin);
+ if (len) {
+ ifp->extra = malloc(len);
+ if (!ifp->extra) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err;
+ }
+ memcpy((unsigned char *) ifp->extra, begin, len);
+ ifp->extra_length = len;
+ }
+
+ if (ifp->bNumEndpoints > 0) {
+ struct libusb_endpoint_descriptor *endpoint;
+ tmp = ifp->bNumEndpoints * sizeof(struct libusb_endpoint_descriptor);
+ endpoint = malloc(tmp);
+ ifp->endpoint = endpoint;
+ if (!endpoint) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err;
+ }
+
+ memset(endpoint, 0, tmp);
+ for (i = 0; i < ifp->bNumEndpoints; i++) {
+ r = parse_endpoint(ctx, endpoint + i, buffer, size,
+ host_endian);
+ if (r < 0)
+ goto err;
+ if (r == 0) {
+ ifp->bNumEndpoints = (uint8_t)i;
+ break;;
+ }
+
+ buffer += r;
+ parsed += r;
+ size -= r;
+ }
+ }
+
+ /* We check to see if it's an alternate to this one */
+ ifp = (struct libusb_interface_descriptor *) buffer;
+ if (size < LIBUSB_DT_INTERFACE_SIZE ||
+ ifp->bDescriptorType != LIBUSB_DT_INTERFACE ||
+ ifp->bInterfaceNumber != interface_number)
+ return parsed;
+ }
+
+ return parsed;
+err:
+ clear_interface(usb_interface);
+ return r;
+}
+
+static void clear_configuration(struct libusb_config_descriptor *config)
+{
+ if (config->interface) {
+ int i;
+ for (i = 0; i < config->bNumInterfaces; i++)
+ clear_interface((struct libusb_interface *)
+ config->interface + i);
+ free((void *) config->interface);
+ }
+ if (config->extra)
+ free((void *) config->extra);
+}
+
+static int parse_configuration(struct libusb_context *ctx,
+ struct libusb_config_descriptor *config, unsigned char *buffer,
+ int size, int host_endian)
+{
+ int i;
+ int r;
+ size_t tmp;
+ struct usb_descriptor_header header;
+ struct libusb_interface *usb_interface;
+
+ if (size < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(ctx, "short config descriptor read %d/%d",
+ size, LIBUSB_DT_CONFIG_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(buffer, "bbwbbbbb", config, host_endian);
+ if (config->bDescriptorType != LIBUSB_DT_CONFIG) {
+ usbi_err(ctx, "unexpected descriptor %x (expected %x)",
+ config->bDescriptorType, LIBUSB_DT_CONFIG);
+ return LIBUSB_ERROR_IO;
+ }
+ if (config->bLength < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(ctx, "invalid config bLength (%d)", config->bLength);
+ return LIBUSB_ERROR_IO;
+ }
+ if (config->bLength > size) {
+ usbi_err(ctx, "short config descriptor read %d/%d",
+ size, config->bLength);
+ return LIBUSB_ERROR_IO;
+ }
+ if (config->bNumInterfaces > USB_MAXINTERFACES) {
+ usbi_err(ctx, "too many interfaces (%d)", config->bNumInterfaces);
+ return LIBUSB_ERROR_IO;
+ }
+
+ tmp = config->bNumInterfaces * sizeof(struct libusb_interface);
+ usb_interface = malloc(tmp);
+ config->interface = usb_interface;
+ if (!config->interface)
+ return LIBUSB_ERROR_NO_MEM;
+
+ memset(usb_interface, 0, tmp);
+ buffer += config->bLength;
+ size -= config->bLength;
+
+ config->extra = NULL;
+ config->extra_length = 0;
+
+ for (i = 0; i < config->bNumInterfaces; i++) {
+ int len;
+ unsigned char *begin;
+
+ /* Skip over the rest of the Class Specific or Vendor */
+ /* Specific descriptors */
+ begin = buffer;
+ while (size >= DESC_HEADER_LENGTH) {
+ usbi_parse_descriptor(buffer, "bb", &header, 0);
+
+ if (header.bLength < DESC_HEADER_LENGTH) {
+ usbi_err(ctx,
+ "invalid extra config desc len (%d)",
+ header.bLength);
+ r = LIBUSB_ERROR_IO;
+ goto err;
+ } else if (header.bLength > size) {
+ usbi_warn(ctx,
+ "short extra config desc read %d/%d",
+ size, header.bLength);
+ config->bNumInterfaces = (uint8_t)i;
+ return size;
+ }
+
+ /* If we find another "proper" descriptor then we're done */
+ if ((header.bDescriptorType == LIBUSB_DT_ENDPOINT) ||
+ (header.bDescriptorType == LIBUSB_DT_INTERFACE) ||
+ (header.bDescriptorType == LIBUSB_DT_CONFIG) ||
+ (header.bDescriptorType == LIBUSB_DT_DEVICE))
+ break;
+
+ usbi_dbg("skipping descriptor 0x%x", header.bDescriptorType);
+ buffer += header.bLength;
+ size -= header.bLength;
+ }
+
+ /* Copy any unknown descriptors into a storage area for */
+ /* drivers to later parse */
+ len = (int)(buffer - begin);
+ if (len) {
+ /* FIXME: We should realloc and append here */
+ if (!config->extra_length) {
+ config->extra = malloc(len);
+ if (!config->extra) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err;
+ }
+
+ memcpy((unsigned char *) config->extra, begin, len);
+ config->extra_length = len;
+ }
+ }
+
+ r = parse_interface(ctx, usb_interface + i, buffer, size, host_endian);
+ if (r < 0)
+ goto err;
+ if (r == 0) {
+ config->bNumInterfaces = (uint8_t)i;
+ break;
+ }
+
+ buffer += r;
+ size -= r;
+ }
+
+ return size;
+
+err:
+ clear_configuration(config);
+ return r;
+}
+
+static int raw_desc_to_config(struct libusb_context *ctx,
+ unsigned char *buf, int size, int host_endian,
+ struct libusb_config_descriptor **config)
+{
+ struct libusb_config_descriptor *_config = malloc(sizeof(*_config));
+ int r;
+
+ if (!_config)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = parse_configuration(ctx, _config, buf, size, host_endian);
+ if (r < 0) {
+ usbi_err(ctx, "parse_configuration failed with error %d", r);
+ free(_config);
+ return r;
+ } else if (r > 0) {
+ usbi_warn(ctx, "still %d bytes of descriptor data left", r);
+ }
+
+ *config = _config;
+ return LIBUSB_SUCCESS;
+}
+
+int usbi_device_cache_descriptor(libusb_device *dev)
+{
+ int r, host_endian = 0;
+
+ r = usbi_backend->get_device_descriptor(dev, (unsigned char *) &dev->device_descriptor,
+ &host_endian);
+ if (r < 0)
+ return r;
+
+ if (!host_endian) {
+ dev->device_descriptor.bcdUSB = libusb_le16_to_cpu(dev->device_descriptor.bcdUSB);
+ dev->device_descriptor.idVendor = libusb_le16_to_cpu(dev->device_descriptor.idVendor);
+ dev->device_descriptor.idProduct = libusb_le16_to_cpu(dev->device_descriptor.idProduct);
+ dev->device_descriptor.bcdDevice = libusb_le16_to_cpu(dev->device_descriptor.bcdDevice);
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup desc
+ * Get the USB device descriptor for a given device.
+ *
+ * This is a non-blocking function; the device descriptor is cached in memory.
+ *
+ * Note since libusb-1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102, this
+ * function always succeeds.
+ *
+ * \param dev the device
+ * \param desc output location for the descriptor data
+ * \returns 0 on success or a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_get_device_descriptor(libusb_device *dev,
+ struct libusb_device_descriptor *desc)
+{
+ usbi_dbg("");
+ memcpy((unsigned char *) desc, (unsigned char *) &dev->device_descriptor,
+ sizeof (dev->device_descriptor));
+ return 0;
+}
+
+/** \ingroup desc
+ * Get the USB configuration descriptor for the currently active configuration.
+ * This is a non-blocking function which does not involve any requests being
+ * sent to the device.
+ *
+ * \param dev a device
+ * \param config output location for the USB configuration descriptor. Only
+ * valid if 0 was returned. Must be freed with libusb_free_config_descriptor()
+ * after use.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the device is in unconfigured state
+ * \returns another LIBUSB_ERROR code on error
+ * \see libusb_get_config_descriptor
+ */
+int API_EXPORTED libusb_get_active_config_descriptor(libusb_device *dev,
+ struct libusb_config_descriptor **config)
+{
+ struct libusb_config_descriptor _config;
+ unsigned char tmp[LIBUSB_DT_CONFIG_SIZE];
+ unsigned char *buf = NULL;
+ int host_endian = 0;
+ int r;
+
+ r = usbi_backend->get_active_config_descriptor(dev, tmp,
+ LIBUSB_DT_CONFIG_SIZE, &host_endian);
+ if (r < 0)
+ return r;
+ if (r < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(dev->ctx, "short config descriptor read %d/%d",
+ r, LIBUSB_DT_CONFIG_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(tmp, "bbw", &_config, host_endian);
+ buf = malloc(_config.wTotalLength);
+ if (!buf)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = usbi_backend->get_active_config_descriptor(dev, buf,
+ _config.wTotalLength, &host_endian);
+ if (r >= 0)
+ r = raw_desc_to_config(dev->ctx, buf, r, host_endian, config);
+
+ free(buf);
+ return r;
+}
+
+/** \ingroup desc
+ * Get a USB configuration descriptor based on its index.
+ * This is a non-blocking function which does not involve any requests being
+ * sent to the device.
+ *
+ * \param dev a device
+ * \param config_index the index of the configuration you wish to retrieve
+ * \param config output location for the USB configuration descriptor. Only
+ * valid if 0 was returned. Must be freed with libusb_free_config_descriptor()
+ * after use.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist
+ * \returns another LIBUSB_ERROR code on error
+ * \see libusb_get_active_config_descriptor()
+ * \see libusb_get_config_descriptor_by_value()
+ */
+int API_EXPORTED libusb_get_config_descriptor(libusb_device *dev,
+ uint8_t config_index, struct libusb_config_descriptor **config)
+{
+ struct libusb_config_descriptor _config;
+ unsigned char tmp[LIBUSB_DT_CONFIG_SIZE];
+ unsigned char *buf = NULL;
+ int host_endian = 0;
+ int r;
+
+ usbi_dbg("index %d", config_index);
+ if (config_index >= dev->num_configurations)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ r = usbi_backend->get_config_descriptor(dev, config_index, tmp,
+ LIBUSB_DT_CONFIG_SIZE, &host_endian);
+ if (r < 0)
+ return r;
+ if (r < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(dev->ctx, "short config descriptor read %d/%d",
+ r, LIBUSB_DT_CONFIG_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(tmp, "bbw", &_config, host_endian);
+ buf = malloc(_config.wTotalLength);
+ if (!buf)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = usbi_backend->get_config_descriptor(dev, config_index, buf,
+ _config.wTotalLength, &host_endian);
+ if (r >= 0)
+ r = raw_desc_to_config(dev->ctx, buf, r, host_endian, config);
+
+ free(buf);
+ return r;
+}
+
+/* iterate through all configurations, returning the index of the configuration
+ * matching a specific bConfigurationValue in the idx output parameter, or -1
+ * if the config was not found.
+ * returns 0 on success or a LIBUSB_ERROR code
+ */
+int usbi_get_config_index_by_value(struct libusb_device *dev,
+ uint8_t bConfigurationValue, int *idx)
+{
+ uint8_t i;
+
+ usbi_dbg("value %d", bConfigurationValue);
+ for (i = 0; i < dev->num_configurations; i++) {
+ unsigned char tmp[6];
+ int host_endian;
+ int r = usbi_backend->get_config_descriptor(dev, i, tmp, sizeof(tmp),
+ &host_endian);
+ if (r < 0) {
+ *idx = -1;
+ return r;
+ }
+ if (tmp[5] == bConfigurationValue) {
+ *idx = i;
+ return 0;
+ }
+ }
+
+ *idx = -1;
+ return 0;
+}
+
+/** \ingroup desc
+ * Get a USB configuration descriptor with a specific bConfigurationValue.
+ * This is a non-blocking function which does not involve any requests being
+ * sent to the device.
+ *
+ * \param dev a device
+ * \param bConfigurationValue the bConfigurationValue of the configuration you
+ * wish to retrieve
+ * \param config output location for the USB configuration descriptor. Only
+ * valid if 0 was returned. Must be freed with libusb_free_config_descriptor()
+ * after use.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist
+ * \returns another LIBUSB_ERROR code on error
+ * \see libusb_get_active_config_descriptor()
+ * \see libusb_get_config_descriptor()
+ */
+int API_EXPORTED libusb_get_config_descriptor_by_value(libusb_device *dev,
+ uint8_t bConfigurationValue, struct libusb_config_descriptor **config)
+{
+ int r, idx, host_endian;
+ unsigned char *buf = NULL;
+
+ if (usbi_backend->get_config_descriptor_by_value) {
+ r = usbi_backend->get_config_descriptor_by_value(dev,
+ bConfigurationValue, &buf, &host_endian);
+ if (r < 0)
+ return r;
+ return raw_desc_to_config(dev->ctx, buf, r, host_endian, config);
+ }
+
+ r = usbi_get_config_index_by_value(dev, bConfigurationValue, &idx);
+ if (r < 0)
+ return r;
+ else if (idx == -1)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else
+ return libusb_get_config_descriptor(dev, (uint8_t) idx, config);
+}
+
+/** \ingroup desc
+ * Free a configuration descriptor obtained from
+ * libusb_get_active_config_descriptor() or libusb_get_config_descriptor().
+ * It is safe to call this function with a NULL config parameter, in which
+ * case the function simply returns.
+ *
+ * \param config the configuration descriptor to free
+ */
+void API_EXPORTED libusb_free_config_descriptor(
+ struct libusb_config_descriptor *config)
+{
+ if (!config)
+ return;
+
+ clear_configuration(config);
+ free(config);
+}
+
+/** \ingroup desc
+ * Get an endpoints superspeed endpoint companion descriptor (if any)
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param endpoint endpoint descriptor from which to get the superspeed
+ * endpoint companion descriptor
+ * \param ep_comp output location for the superspeed endpoint companion
+ * descriptor. Only valid if 0 was returned. Must be freed with
+ * libusb_free_ss_endpoint_companion_descriptor() after use.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist
+ * \returns another LIBUSB_ERROR code on error
+ */
+int API_EXPORTED libusb_get_ss_endpoint_companion_descriptor(
+ struct libusb_context *ctx,
+ const struct libusb_endpoint_descriptor *endpoint,
+ struct libusb_ss_endpoint_companion_descriptor **ep_comp)
+{
+ struct usb_descriptor_header header;
+ int size = endpoint->extra_length;
+ const unsigned char *buffer = endpoint->extra;
+
+ *ep_comp = NULL;
+
+ while (size >= DESC_HEADER_LENGTH) {
+ usbi_parse_descriptor(buffer, "bb", &header, 0);
+ if (header.bLength < 2 || header.bLength > size) {
+ usbi_err(ctx, "invalid descriptor length %d",
+ header.bLength);
+ return LIBUSB_ERROR_IO;
+ }
+ if (header.bDescriptorType != LIBUSB_DT_SS_ENDPOINT_COMPANION) {
+ buffer += header.bLength;
+ size -= header.bLength;
+ continue;
+ }
+ if (header.bLength < LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE) {
+ usbi_err(ctx, "invalid ss-ep-comp-desc length %d",
+ header.bLength);
+ return LIBUSB_ERROR_IO;
+ }
+ *ep_comp = malloc(sizeof(**ep_comp));
+ if (*ep_comp == NULL)
+ return LIBUSB_ERROR_NO_MEM;
+ usbi_parse_descriptor(buffer, "bbbbw", *ep_comp, 0);
+ return LIBUSB_SUCCESS;
+ }
+ return LIBUSB_ERROR_NOT_FOUND;
+}
+
+/** \ingroup desc
+ * Free a superspeed endpoint companion descriptor obtained from
+ * libusb_get_ss_endpoint_companion_descriptor().
+ * It is safe to call this function with a NULL ep_comp parameter, in which
+ * case the function simply returns.
+ *
+ * \param ep_comp the superspeed endpoint companion descriptor to free
+ */
+void API_EXPORTED libusb_free_ss_endpoint_companion_descriptor(
+ struct libusb_ss_endpoint_companion_descriptor *ep_comp)
+{
+ free(ep_comp);
+}
+
+static int parse_bos(struct libusb_context *ctx,
+ struct libusb_bos_descriptor **bos,
+ unsigned char *buffer, int size, int host_endian)
+{
+ struct libusb_bos_descriptor bos_header, *_bos;
+ struct libusb_bos_dev_capability_descriptor dev_cap;
+ int i;
+
+ if (size < LIBUSB_DT_BOS_SIZE) {
+ usbi_err(ctx, "short bos descriptor read %d/%d",
+ size, LIBUSB_DT_BOS_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(buffer, "bbwb", &bos_header, host_endian);
+ if (bos_header.bDescriptorType != LIBUSB_DT_BOS) {
+ usbi_err(ctx, "unexpected descriptor %x (expected %x)",
+ bos_header.bDescriptorType, LIBUSB_DT_BOS);
+ return LIBUSB_ERROR_IO;
+ }
+ if (bos_header.bLength < LIBUSB_DT_BOS_SIZE) {
+ usbi_err(ctx, "invalid bos bLength (%d)", bos_header.bLength);
+ return LIBUSB_ERROR_IO;
+ }
+ if (bos_header.bLength > size) {
+ usbi_err(ctx, "short bos descriptor read %d/%d",
+ size, bos_header.bLength);
+ return LIBUSB_ERROR_IO;
+ }
+
+ _bos = calloc (1,
+ sizeof(*_bos) + bos_header.bNumDeviceCaps * sizeof(void *));
+ if (!_bos)
+ return LIBUSB_ERROR_NO_MEM;
+
+ usbi_parse_descriptor(buffer, "bbwb", _bos, host_endian);
+ buffer += bos_header.bLength;
+ size -= bos_header.bLength;
+
+ /* Get the device capability descriptors */
+ for (i = 0; i < bos_header.bNumDeviceCaps; i++) {
+ if (size < LIBUSB_DT_DEVICE_CAPABILITY_SIZE) {
+ usbi_warn(ctx, "short dev-cap descriptor read %d/%d",
+ size, LIBUSB_DT_DEVICE_CAPABILITY_SIZE);
+ break;
+ }
+ usbi_parse_descriptor(buffer, "bbb", &dev_cap, host_endian);
+ if (dev_cap.bDescriptorType != LIBUSB_DT_DEVICE_CAPABILITY) {
+ usbi_warn(ctx, "unexpected descriptor %x (expected %x)",
+ dev_cap.bDescriptorType, LIBUSB_DT_DEVICE_CAPABILITY);
+ break;
+ }
+ if (dev_cap.bLength < LIBUSB_DT_DEVICE_CAPABILITY_SIZE) {
+ usbi_err(ctx, "invalid dev-cap bLength (%d)",
+ dev_cap.bLength);
+ libusb_free_bos_descriptor(_bos);
+ return LIBUSB_ERROR_IO;
+ }
+ if (dev_cap.bLength > size) {
+ usbi_warn(ctx, "short dev-cap descriptor read %d/%d",
+ size, dev_cap.bLength);
+ break;
+ }
+
+ _bos->dev_capability[i] = malloc(dev_cap.bLength);
+ if (!_bos->dev_capability[i]) {
+ libusb_free_bos_descriptor(_bos);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ memcpy(_bos->dev_capability[i], buffer, dev_cap.bLength);
+ buffer += dev_cap.bLength;
+ size -= dev_cap.bLength;
+ }
+ _bos->bNumDeviceCaps = (uint8_t)i;
+ *bos = _bos;
+
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup desc
+ * Get a Binary Object Store (BOS) descriptor
+ * This is a BLOCKING function, which will send requests to the device.
+ *
+ * \param handle the handle of an open libusb device
+ * \param bos output location for the BOS descriptor. Only valid if 0 was returned.
+ * Must be freed with \ref libusb_free_bos_descriptor() after use.
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the device doesn't have a BOS descriptor
+ * \returns another LIBUSB_ERROR code on error
+ */
+int API_EXPORTED libusb_get_bos_descriptor(libusb_device_handle *handle,
+ struct libusb_bos_descriptor **bos)
+{
+ struct libusb_bos_descriptor _bos;
+ uint8_t bos_header[LIBUSB_DT_BOS_SIZE] = {0};
+ unsigned char *bos_data = NULL;
+ const int host_endian = 0;
+ int r;
+
+ /* Read the BOS. This generates 2 requests on the bus,
+ * one for the header, and one for the full BOS */
+ r = libusb_get_descriptor(handle, LIBUSB_DT_BOS, 0, bos_header,
+ LIBUSB_DT_BOS_SIZE);
+ if (r < 0) {
+ if (r != LIBUSB_ERROR_PIPE)
+ usbi_err(handle->dev->ctx, "failed to read BOS (%d)", r);
+ return r;
+ }
+ if (r < LIBUSB_DT_BOS_SIZE) {
+ usbi_err(handle->dev->ctx, "short BOS read %d/%d",
+ r, LIBUSB_DT_BOS_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(bos_header, "bbwb", &_bos, host_endian);
+ usbi_dbg("found BOS descriptor: size %d bytes, %d capabilities",
+ _bos.wTotalLength, _bos.bNumDeviceCaps);
+ bos_data = calloc(_bos.wTotalLength, 1);
+ if (bos_data == NULL)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = libusb_get_descriptor(handle, LIBUSB_DT_BOS, 0, bos_data,
+ _bos.wTotalLength);
+ if (r >= 0)
+ r = parse_bos(handle->dev->ctx, bos, bos_data, r, host_endian);
+ else
+ usbi_err(handle->dev->ctx, "failed to read BOS (%d)", r);
+
+ free(bos_data);
+ return r;
+}
+
+/** \ingroup desc
+ * Free a BOS descriptor obtained from libusb_get_bos_descriptor().
+ * It is safe to call this function with a NULL bos parameter, in which
+ * case the function simply returns.
+ *
+ * \param bos the BOS descriptor to free
+ */
+void API_EXPORTED libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos)
+{
+ int i;
+
+ if (!bos)
+ return;
+
+ for (i = 0; i < bos->bNumDeviceCaps; i++)
+ free(bos->dev_capability[i]);
+ free(bos);
+}
+
+/** \ingroup desc
+ * Get an USB 2.0 Extension descriptor
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param dev_cap Device Capability descriptor with a bDevCapabilityType of
+ * \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION
+ * LIBUSB_BT_USB_2_0_EXTENSION
+ * \param usb_2_0_extension output location for the USB 2.0 Extension
+ * descriptor. Only valid if 0 was returned. Must be freed with
+ * libusb_free_usb_2_0_extension_descriptor() after use.
+ * \returns 0 on success
+ * \returns a LIBUSB_ERROR code on error
+ */
+int API_EXPORTED libusb_get_usb_2_0_extension_descriptor(
+ struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension)
+{
+ struct libusb_usb_2_0_extension_descriptor *_usb_2_0_extension;
+ const int host_endian = 0;
+
+ if (dev_cap->bDevCapabilityType != LIBUSB_BT_USB_2_0_EXTENSION) {
+ usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)",
+ dev_cap->bDevCapabilityType,
+ LIBUSB_BT_USB_2_0_EXTENSION);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ if (dev_cap->bLength < LIBUSB_BT_USB_2_0_EXTENSION_SIZE) {
+ usbi_err(ctx, "short dev-cap descriptor read %d/%d",
+ dev_cap->bLength, LIBUSB_BT_USB_2_0_EXTENSION_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ _usb_2_0_extension = malloc(sizeof(*_usb_2_0_extension));
+ if (!_usb_2_0_extension)
+ return LIBUSB_ERROR_NO_MEM;
+
+ usbi_parse_descriptor((unsigned char *)dev_cap, "bbbd",
+ _usb_2_0_extension, host_endian);
+
+ *usb_2_0_extension = _usb_2_0_extension;
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup desc
+ * Free a USB 2.0 Extension descriptor obtained from
+ * libusb_get_usb_2_0_extension_descriptor().
+ * It is safe to call this function with a NULL usb_2_0_extension parameter,
+ * in which case the function simply returns.
+ *
+ * \param usb_2_0_extension the USB 2.0 Extension descriptor to free
+ */
+void API_EXPORTED libusb_free_usb_2_0_extension_descriptor(
+ struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension)
+{
+ free(usb_2_0_extension);
+}
+
+/** \ingroup desc
+ * Get a SuperSpeed USB Device Capability descriptor
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param dev_cap Device Capability descriptor with a bDevCapabilityType of
+ * \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY
+ * LIBUSB_BT_SS_USB_DEVICE_CAPABILITY
+ * \param ss_usb_device_cap output location for the SuperSpeed USB Device
+ * Capability descriptor. Only valid if 0 was returned. Must be freed with
+ * libusb_free_ss_usb_device_capability_descriptor() after use.
+ * \returns 0 on success
+ * \returns a LIBUSB_ERROR code on error
+ */
+int API_EXPORTED libusb_get_ss_usb_device_capability_descriptor(
+ struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap)
+{
+ struct libusb_ss_usb_device_capability_descriptor *_ss_usb_device_cap;
+ const int host_endian = 0;
+
+ if (dev_cap->bDevCapabilityType != LIBUSB_BT_SS_USB_DEVICE_CAPABILITY) {
+ usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)",
+ dev_cap->bDevCapabilityType,
+ LIBUSB_BT_SS_USB_DEVICE_CAPABILITY);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ if (dev_cap->bLength < LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE) {
+ usbi_err(ctx, "short dev-cap descriptor read %d/%d",
+ dev_cap->bLength, LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ _ss_usb_device_cap = malloc(sizeof(*_ss_usb_device_cap));
+ if (!_ss_usb_device_cap)
+ return LIBUSB_ERROR_NO_MEM;
+
+ usbi_parse_descriptor((unsigned char *)dev_cap, "bbbbwbbw",
+ _ss_usb_device_cap, host_endian);
+
+ *ss_usb_device_cap = _ss_usb_device_cap;
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup desc
+ * Free a SuperSpeed USB Device Capability descriptor obtained from
+ * libusb_get_ss_usb_device_capability_descriptor().
+ * It is safe to call this function with a NULL ss_usb_device_cap
+ * parameter, in which case the function simply returns.
+ *
+ * \param ss_usb_device_cap the USB 2.0 Extension descriptor to free
+ */
+void API_EXPORTED libusb_free_ss_usb_device_capability_descriptor(
+ struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap)
+{
+ free(ss_usb_device_cap);
+}
+
+/** \ingroup desc
+ * Get a Container ID descriptor
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param dev_cap Device Capability descriptor with a bDevCapabilityType of
+ * \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID
+ * LIBUSB_BT_CONTAINER_ID
+ * \param container_id output location for the Container ID descriptor.
+ * Only valid if 0 was returned. Must be freed with
+ * libusb_free_container_id_descriptor() after use.
+ * \returns 0 on success
+ * \returns a LIBUSB_ERROR code on error
+ */
+int API_EXPORTED libusb_get_container_id_descriptor(struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_container_id_descriptor **container_id)
+{
+ struct libusb_container_id_descriptor *_container_id;
+ const int host_endian = 0;
+
+ if (dev_cap->bDevCapabilityType != LIBUSB_BT_CONTAINER_ID) {
+ usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)",
+ dev_cap->bDevCapabilityType,
+ LIBUSB_BT_CONTAINER_ID);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ if (dev_cap->bLength < LIBUSB_BT_CONTAINER_ID_SIZE) {
+ usbi_err(ctx, "short dev-cap descriptor read %d/%d",
+ dev_cap->bLength, LIBUSB_BT_CONTAINER_ID_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ _container_id = malloc(sizeof(*_container_id));
+ if (!_container_id)
+ return LIBUSB_ERROR_NO_MEM;
+
+ usbi_parse_descriptor((unsigned char *)dev_cap, "bbbbu",
+ _container_id, host_endian);
+
+ *container_id = _container_id;
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup desc
+ * Free a Container ID descriptor obtained from
+ * libusb_get_container_id_descriptor().
+ * It is safe to call this function with a NULL container_id parameter,
+ * in which case the function simply returns.
+ *
+ * \param container_id the USB 2.0 Extension descriptor to free
+ */
+void API_EXPORTED libusb_free_container_id_descriptor(
+ struct libusb_container_id_descriptor *container_id)
+{
+ free(container_id);
+}
+
+/** \ingroup desc
+ * Retrieve a string descriptor in C style ASCII.
+ *
+ * Wrapper around libusb_get_string_descriptor(). Uses the first language
+ * supported by the device.
+ *
+ * \param dev a device handle
+ * \param desc_index the index of the descriptor to retrieve
+ * \param data output buffer for ASCII string descriptor
+ * \param length size of data buffer
+ * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_get_string_descriptor_ascii(libusb_device_handle *dev,
+ uint8_t desc_index, unsigned char *data, int length)
+{
+ unsigned char tbuf[255]; /* Some devices choke on size > 255 */
+ int r, si, di;
+ uint16_t langid;
+
+ /* Asking for the zero'th index is special - it returns a string
+ * descriptor that contains all the language IDs supported by the
+ * device. Typically there aren't many - often only one. Language
+ * IDs are 16 bit numbers, and they start at the third byte in the
+ * descriptor. There's also no point in trying to read descriptor 0
+ * with this function. See USB 2.0 specification section 9.6.7 for
+ * more information.
+ */
+
+ if (desc_index == 0)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ r = libusb_get_string_descriptor(dev, 0, 0, tbuf, sizeof(tbuf));
+ if (r < 0)
+ return r;
+
+ if (r < 4)
+ return LIBUSB_ERROR_IO;
+
+ langid = tbuf[2] | (tbuf[3] << 8);
+
+ r = libusb_get_string_descriptor(dev, desc_index, langid, tbuf,
+ sizeof(tbuf));
+ if (r < 0)
+ return r;
+
+ if (tbuf[1] != LIBUSB_DT_STRING)
+ return LIBUSB_ERROR_IO;
+
+ if (tbuf[0] > r)
+ return LIBUSB_ERROR_IO;
+
+ for (di = 0, si = 2; si < tbuf[0]; si += 2) {
+ if (di >= (length - 1))
+ break;
+
+ if ((tbuf[si] & 0x80) || (tbuf[si + 1])) /* non-ASCII */
+ data[di++] = '?';
+ else
+ data[di++] = tbuf[si];
+ }
+
+ data[di] = 0;
+ return di;
+}
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * Hotplug functions for libusb
+ * Copyright © 2012-2013 Nathan Hjelm <hjelmn@mac.com>
+ * Copyright © 2012-2013 Peter Stuge <peter@stuge.se>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#include <assert.h>
+
+#include "libusbi.h"
+#include "hotplug.h"
+
+/**
+ * @defgroup hotplug Device hotplug event notification
+ * This page details how to use the libusb hotplug interface, where available.
+ *
+ * Be mindful that not all platforms currently implement hotplug notification and
+ * that you should first call on \ref libusb_has_capability() with parameter
+ * \ref LIBUSB_CAP_HAS_HOTPLUG to confirm that hotplug support is available.
+ *
+ * \page hotplug Device hotplug event notification
+ *
+ * \section hotplug_intro Introduction
+ *
+ * Version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102, has added support
+ * for hotplug events on <b>some</b> platforms (you should test if your platform
+ * supports hotplug notification by calling \ref libusb_has_capability() with
+ * parameter \ref LIBUSB_CAP_HAS_HOTPLUG).
+ *
+ * This interface allows you to request notification for the arrival and departure
+ * of matching USB devices.
+ *
+ * To receive hotplug notification you register a callback by calling
+ * \ref libusb_hotplug_register_callback(). This function will optionally return
+ * a handle that can be passed to \ref libusb_hotplug_deregister_callback().
+ *
+ * A callback function must return an int (0 or 1) indicating whether the callback is
+ * expecting additional events. Returning 0 will rearm the callback and 1 will cause
+ * the callback to be deregistered. Note that when callbacks are called from
+ * libusb_hotplug_register_callback() because of the \ref LIBUSB_HOTPLUG_ENUMERATE
+ * flag, the callback return value is ignored, iow you cannot cause a callback
+ * to be deregistered by returning 1 when it is called from
+ * libusb_hotplug_register_callback().
+ *
+ * Callbacks for a particular context are automatically deregistered by libusb_exit().
+ *
+ * As of 1.0.16 there are two supported hotplug events:
+ * - LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED: A device has arrived and is ready to use
+ * - LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT: A device has left and is no longer available
+ *
+ * A hotplug event can listen for either or both of these events.
+ *
+ * Note: If you receive notification that a device has left and you have any
+ * a libusb_device_handles for the device it is up to you to call libusb_close()
+ * on each handle to free up any remaining resources associated with the device.
+ * Once a device has left any libusb_device_handle associated with the device
+ * are invalid and will remain so even if the device comes back.
+ *
+ * When handling a LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED event it is considered
+ * safe to call any libusb function that takes a libusb_device. On the other hand,
+ * when handling a LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT event the only safe function
+ * is libusb_get_device_descriptor().
+ *
+ * The following code provides an example of the usage of the hotplug interface:
+\code
+#include <stdio.h>
+#include <stdlib.h>
+#include <libusb.h>
+
+static int count = 0;
+
+int hotplug_callback(struct libusb_context *ctx, struct libusb_device *dev,
+ libusb_hotplug_event event, void *user_data) {
+ static libusb_device_handle *handle = NULL;
+ struct libusb_device_descriptor desc;
+ int rc;
+
+ (void)libusb_get_device_descriptor(dev, &desc);
+
+ if (LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED == event) {
+ rc = libusb_open(dev, &handle);
+ if (LIBUSB_SUCCESS != rc) {
+ printf("Could not open USB device\n");
+ }
+ } else if (LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT == event) {
+ if (handle) {
+ libusb_close(handle);
+ handle = NULL;
+ }
+ } else {
+ printf("Unhandled event %d\n", event);
+ }
+ count++;
+
+ return 0;
+}
+
+int main (void) {
+ libusb_hotplug_callback_handle handle;
+ int rc;
+
+ libusb_init(NULL);
+
+ rc = libusb_hotplug_register_callback(NULL, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED |
+ LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT, 0, 0x045a, 0x5005,
+ LIBUSB_HOTPLUG_MATCH_ANY, hotplug_callback, NULL,
+ &handle);
+ if (LIBUSB_SUCCESS != rc) {
+ printf("Error creating a hotplug callback\n");
+ libusb_exit(NULL);
+ return EXIT_FAILURE;
+ }
+
+ while (count < 2) {
+ libusb_handle_events_completed(NULL, NULL);
+ usleep(10000);
+ }
+
+ libusb_hotplug_deregister_callback(NULL, handle);
+ libusb_exit(NULL);
+
+ return 0;
+}
+\endcode
+ */
+
+static int usbi_hotplug_match_cb (struct libusb_context *ctx,
+ struct libusb_device *dev, libusb_hotplug_event event,
+ struct libusb_hotplug_callback *hotplug_cb)
+{
+ /* Handle lazy deregistration of callback */
+ if (hotplug_cb->needs_free) {
+ /* Free callback */
+ return 1;
+ }
+
+ if (!(hotplug_cb->events & event)) {
+ return 0;
+ }
+
+ if (LIBUSB_HOTPLUG_MATCH_ANY != hotplug_cb->vendor_id &&
+ hotplug_cb->vendor_id != dev->device_descriptor.idVendor) {
+ return 0;
+ }
+
+ if (LIBUSB_HOTPLUG_MATCH_ANY != hotplug_cb->product_id &&
+ hotplug_cb->product_id != dev->device_descriptor.idProduct) {
+ return 0;
+ }
+
+ if (LIBUSB_HOTPLUG_MATCH_ANY != hotplug_cb->dev_class &&
+ hotplug_cb->dev_class != dev->device_descriptor.bDeviceClass) {
+ return 0;
+ }
+
+ return hotplug_cb->cb (ctx, dev, event, hotplug_cb->user_data);
+}
+
+void usbi_hotplug_match(struct libusb_context *ctx, struct libusb_device *dev,
+ libusb_hotplug_event event)
+{
+ struct libusb_hotplug_callback *hotplug_cb, *next;
+ int ret;
+
+ usbi_mutex_lock(&ctx->hotplug_cbs_lock);
+
+ list_for_each_entry_safe(hotplug_cb, next, &ctx->hotplug_cbs, list, struct libusb_hotplug_callback) {
+ usbi_mutex_unlock(&ctx->hotplug_cbs_lock);
+ ret = usbi_hotplug_match_cb (ctx, dev, event, hotplug_cb);
+ usbi_mutex_lock(&ctx->hotplug_cbs_lock);
+
+ if (ret) {
+ list_del(&hotplug_cb->list);
+ free(hotplug_cb);
+ }
+ }
+
+ usbi_mutex_unlock(&ctx->hotplug_cbs_lock);
+
+ /* the backend is expected to call the callback for each active transfer */
+}
+
+void usbi_hotplug_notification(struct libusb_context *ctx, struct libusb_device *dev,
+ libusb_hotplug_event event)
+{
+ int pending_events;
+ libusb_hotplug_message *message = calloc(1, sizeof(*message));
+
+ if (!message) {
+ usbi_err(ctx, "error allocating hotplug message");
+ return;
+ }
+
+ message->event = event;
+ message->device = dev;
+
+ /* Take the event data lock and add this message to the list.
+ * Only signal an event if there are no prior pending events. */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ pending_events = usbi_pending_events(ctx);
+ list_add_tail(&message->list, &ctx->hotplug_msgs);
+ if (!pending_events)
+ usbi_signal_event(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+}
+
+int API_EXPORTED libusb_hotplug_register_callback(libusb_context *ctx,
+ libusb_hotplug_event events, libusb_hotplug_flag flags,
+ int vendor_id, int product_id, int dev_class,
+ libusb_hotplug_callback_fn cb_fn, void *user_data,
+ libusb_hotplug_callback_handle *handle)
+{
+ libusb_hotplug_callback *new_callback;
+ static int handle_id = 1;
+
+ /* check for hotplug support */
+ if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ }
+
+ /* check for sane values */
+ if ((LIBUSB_HOTPLUG_MATCH_ANY != vendor_id && (~0xffff & vendor_id)) ||
+ (LIBUSB_HOTPLUG_MATCH_ANY != product_id && (~0xffff & product_id)) ||
+ (LIBUSB_HOTPLUG_MATCH_ANY != dev_class && (~0xff & dev_class)) ||
+ !cb_fn) {
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ USBI_GET_CONTEXT(ctx);
+
+ new_callback = (libusb_hotplug_callback *)calloc(1, sizeof (*new_callback));
+ if (!new_callback) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ new_callback->ctx = ctx;
+ new_callback->vendor_id = vendor_id;
+ new_callback->product_id = product_id;
+ new_callback->dev_class = dev_class;
+ new_callback->flags = flags;
+ new_callback->events = events;
+ new_callback->cb = cb_fn;
+ new_callback->user_data = user_data;
+ new_callback->needs_free = 0;
+
+ usbi_mutex_lock(&ctx->hotplug_cbs_lock);
+
+ /* protect the handle by the context hotplug lock. it doesn't matter if the same handle
+ * is used for different contexts only that the handle is unique for this context */
+ new_callback->handle = handle_id++;
+
+ list_add(&new_callback->list, &ctx->hotplug_cbs);
+
+ usbi_mutex_unlock(&ctx->hotplug_cbs_lock);
+
+
+ if (flags & LIBUSB_HOTPLUG_ENUMERATE) {
+ int i, len;
+ struct libusb_device **devs;
+
+ len = (int) libusb_get_device_list(ctx, &devs);
+ if (len < 0) {
+ libusb_hotplug_deregister_callback(ctx,
+ new_callback->handle);
+ return len;
+ }
+
+ for (i = 0; i < len; i++) {
+ usbi_hotplug_match_cb(ctx, devs[i],
+ LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED,
+ new_callback);
+ }
+
+ libusb_free_device_list(devs, 1);
+ }
+
+
+ if (handle) {
+ *handle = new_callback->handle;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+void API_EXPORTED libusb_hotplug_deregister_callback (struct libusb_context *ctx,
+ libusb_hotplug_callback_handle handle)
+{
+ struct libusb_hotplug_callback *hotplug_cb;
+
+ /* check for hotplug support */
+ if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
+ return;
+ }
+
+ USBI_GET_CONTEXT(ctx);
+
+ usbi_mutex_lock(&ctx->hotplug_cbs_lock);
+ list_for_each_entry(hotplug_cb, &ctx->hotplug_cbs, list,
+ struct libusb_hotplug_callback) {
+ if (handle == hotplug_cb->handle) {
+ /* Mark this callback for deregistration */
+ hotplug_cb->needs_free = 1;
+ }
+ }
+ usbi_mutex_unlock(&ctx->hotplug_cbs_lock);
+
+ usbi_hotplug_notification(ctx, NULL, 0);
+}
+
+void usbi_hotplug_deregister_all(struct libusb_context *ctx) {
+ struct libusb_hotplug_callback *hotplug_cb, *next;
+
+ usbi_mutex_lock(&ctx->hotplug_cbs_lock);
+ list_for_each_entry_safe(hotplug_cb, next, &ctx->hotplug_cbs, list,
+ struct libusb_hotplug_callback) {
+ list_del(&hotplug_cb->list);
+ free(hotplug_cb);
+ }
+
+ usbi_mutex_unlock(&ctx->hotplug_cbs_lock);
+}
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * Hotplug support for libusb
+ * Copyright © 2012-2013 Nathan Hjelm <hjelmn@mac.com>
+ * Copyright © 2012-2013 Peter Stuge <peter@stuge.se>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#if !defined(USBI_HOTPLUG_H)
+#define USBI_HOTPLUG_H
+
+#ifndef LIBUSBI_H
+#include "libusbi.h"
+#endif
+
+/** \ingroup hotplug
+ * The hotplug callback structure. The user populates this structure with
+ * libusb_hotplug_prepare_callback() and then calls libusb_hotplug_register_callback()
+ * to receive notification of hotplug events.
+ */
+struct libusb_hotplug_callback {
+ /** Context this callback is associated with */
+ struct libusb_context *ctx;
+
+ /** Vendor ID to match or LIBUSB_HOTPLUG_MATCH_ANY */
+ int vendor_id;
+
+ /** Product ID to match or LIBUSB_HOTPLUG_MATCH_ANY */
+ int product_id;
+
+ /** Device class to match or LIBUSB_HOTPLUG_MATCH_ANY */
+ int dev_class;
+
+ /** Hotplug callback flags */
+ libusb_hotplug_flag flags;
+
+ /** Event(s) that will trigger this callback */
+ libusb_hotplug_event events;
+
+ /** Callback function to invoke for matching event/device */
+ libusb_hotplug_callback_fn cb;
+
+ /** Handle for this callback (used to match on deregister) */
+ libusb_hotplug_callback_handle handle;
+
+ /** User data that will be passed to the callback function */
+ void *user_data;
+
+ /** Callback is marked for deletion */
+ int needs_free;
+
+ /** List this callback is registered in (ctx->hotplug_cbs) */
+ struct list_head list;
+};
+
+typedef struct libusb_hotplug_callback libusb_hotplug_callback;
+
+struct libusb_hotplug_message {
+ /** The hotplug event that occurred */
+ libusb_hotplug_event event;
+
+ /** The device for which this hotplug event occurred */
+ struct libusb_device *device;
+
+ /** List this message is contained in (ctx->hotplug_msgs) */
+ struct list_head list;
+};
+
+typedef struct libusb_hotplug_message libusb_hotplug_message;
+
+void usbi_hotplug_deregister_all(struct libusb_context *ctx);
+void usbi_hotplug_match(struct libusb_context *ctx, struct libusb_device *dev,
+ libusb_hotplug_event event);
+void usbi_hotplug_notification(struct libusb_context *ctx, struct libusb_device *dev,
+ libusb_hotplug_event event);
+
+#endif
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
+/*
+ * I/O functions for libusb
+ * Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#ifdef HAVE_SIGNAL_H
+#include <signal.h>
+#endif
+#ifdef HAVE_SYS_TIME_H
+#include <sys/time.h>
+#endif
+#ifdef USBI_TIMERFD_AVAILABLE
+#include <sys/timerfd.h>
+#endif
+
+#include "libusbi.h"
+#include "hotplug.h"
+
+/**
+ * \page io Synchronous and asynchronous device I/O
+ *
+ * \section io_intro Introduction
+ *
+ * If you're using libusb in your application, you're probably wanting to
+ * perform I/O with devices - you want to perform USB data transfers.
+ *
+ * libusb offers two separate interfaces for device I/O. This page aims to
+ * introduce the two in order to help you decide which one is more suitable
+ * for your application. You can also choose to use both interfaces in your
+ * application by considering each transfer on a case-by-case basis.
+ *
+ * Once you have read through the following discussion, you should consult the
+ * detailed API documentation pages for the details:
+ * - \ref syncio
+ * - \ref asyncio
+ *
+ * \section theory Transfers at a logical level
+ *
+ * At a logical level, USB transfers typically happen in two parts. For
+ * example, when reading data from a endpoint:
+ * -# A request for data is sent to the device
+ * -# Some time later, the incoming data is received by the host
+ *
+ * or when writing data to an endpoint:
+ *
+ * -# The data is sent to the device
+ * -# Some time later, the host receives acknowledgement from the device that
+ * the data has been transferred.
+ *
+ * There may be an indefinite delay between the two steps. Consider a
+ * fictional USB input device with a button that the user can press. In order
+ * to determine when the button is pressed, you would likely submit a request
+ * to read data on a bulk or interrupt endpoint and wait for data to arrive.
+ * Data will arrive when the button is pressed by the user, which is
+ * potentially hours later.
+ *
+ * libusb offers both a synchronous and an asynchronous interface to performing
+ * USB transfers. The main difference is that the synchronous interface
+ * combines both steps indicated above into a single function call, whereas
+ * the asynchronous interface separates them.
+ *
+ * \section sync The synchronous interface
+ *
+ * The synchronous I/O interface allows you to perform a USB transfer with
+ * a single function call. When the function call returns, the transfer has
+ * completed and you can parse the results.
+ *
+ * If you have used the libusb-0.1 before, this I/O style will seem familar to
+ * you. libusb-0.1 only offered a synchronous interface.
+ *
+ * In our input device example, to read button presses you might write code
+ * in the following style:
+\code
+unsigned char data[4];
+int actual_length;
+int r = libusb_bulk_transfer(handle, LIBUSB_ENDPOINT_IN, data, sizeof(data), &actual_length, 0);
+if (r == 0 && actual_length == sizeof(data)) {
+ // results of the transaction can now be found in the data buffer
+ // parse them here and report button press
+} else {
+ error();
+}
+\endcode
+ *
+ * The main advantage of this model is simplicity: you did everything with
+ * a single simple function call.
+ *
+ * However, this interface has its limitations. Your application will sleep
+ * inside libusb_bulk_transfer() until the transaction has completed. If it
+ * takes the user 3 hours to press the button, your application will be
+ * sleeping for that long. Execution will be tied up inside the library -
+ * the entire thread will be useless for that duration.
+ *
+ * Another issue is that by tieing up the thread with that single transaction
+ * there is no possibility of performing I/O with multiple endpoints and/or
+ * multiple devices simultaneously, unless you resort to creating one thread
+ * per transaction.
+ *
+ * Additionally, there is no opportunity to cancel the transfer after the
+ * request has been submitted.
+ *
+ * For details on how to use the synchronous API, see the
+ * \ref syncio "synchronous I/O API documentation" pages.
+ *
+ * \section async The asynchronous interface
+ *
+ * Asynchronous I/O is the most significant new feature in libusb-1.0.
+ * Although it is a more complex interface, it solves all the issues detailed
+ * above.
+ *
+ * Instead of providing which functions that block until the I/O has complete,
+ * libusb's asynchronous interface presents non-blocking functions which
+ * begin a transfer and then return immediately. Your application passes a
+ * callback function pointer to this non-blocking function, which libusb will
+ * call with the results of the transaction when it has completed.
+ *
+ * Transfers which have been submitted through the non-blocking functions
+ * can be cancelled with a separate function call.
+ *
+ * The non-blocking nature of this interface allows you to be simultaneously
+ * performing I/O to multiple endpoints on multiple devices, without having
+ * to use threads.
+ *
+ * This added flexibility does come with some complications though:
+ * - In the interest of being a lightweight library, libusb does not create
+ * threads and can only operate when your application is calling into it. Your
+ * application must call into libusb from it's main loop when events are ready
+ * to be handled, or you must use some other scheme to allow libusb to
+ * undertake whatever work needs to be done.
+ * - libusb also needs to be called into at certain fixed points in time in
+ * order to accurately handle transfer timeouts.
+ * - Memory handling becomes more complex. You cannot use stack memory unless
+ * the function with that stack is guaranteed not to return until the transfer
+ * callback has finished executing.
+ * - You generally lose some linearity from your code flow because submitting
+ * the transfer request is done in a separate function from where the transfer
+ * results are handled. This becomes particularly obvious when you want to
+ * submit a second transfer based on the results of an earlier transfer.
+ *
+ * Internally, libusb's synchronous interface is expressed in terms of function
+ * calls to the asynchronous interface.
+ *
+ * For details on how to use the asynchronous API, see the
+ * \ref asyncio "asynchronous I/O API" documentation pages.
+ */
+
+
+/**
+ * \page packetoverflow Packets and overflows
+ *
+ * \section packets Packet abstraction
+ *
+ * The USB specifications describe how data is transmitted in packets, with
+ * constraints on packet size defined by endpoint descriptors. The host must
+ * not send data payloads larger than the endpoint's maximum packet size.
+ *
+ * libusb and the underlying OS abstract out the packet concept, allowing you
+ * to request transfers of any size. Internally, the request will be divided
+ * up into correctly-sized packets. You do not have to be concerned with
+ * packet sizes, but there is one exception when considering overflows.
+ *
+ * \section overflow Bulk/interrupt transfer overflows
+ *
+ * When requesting data on a bulk endpoint, libusb requires you to supply a
+ * buffer and the maximum number of bytes of data that libusb can put in that
+ * buffer. However, the size of the buffer is not communicated to the device -
+ * the device is just asked to send any amount of data.
+ *
+ * There is no problem if the device sends an amount of data that is less than
+ * or equal to the buffer size. libusb reports this condition to you through
+ * the \ref libusb_transfer::actual_length "libusb_transfer.actual_length"
+ * field.
+ *
+ * Problems may occur if the device attempts to send more data than can fit in
+ * the buffer. libusb reports LIBUSB_TRANSFER_OVERFLOW for this condition but
+ * other behaviour is largely undefined: actual_length may or may not be
+ * accurate, the chunk of data that can fit in the buffer (before overflow)
+ * may or may not have been transferred.
+ *
+ * Overflows are nasty, but can be avoided. Even though you were told to
+ * ignore packets above, think about the lower level details: each transfer is
+ * split into packets (typically small, with a maximum size of 512 bytes).
+ * Overflows can only happen if the final packet in an incoming data transfer
+ * is smaller than the actual packet that the device wants to transfer.
+ * Therefore, you will never see an overflow if your transfer buffer size is a
+ * multiple of the endpoint's packet size: the final packet will either
+ * fill up completely or will be only partially filled.
+ */
+
+/**
+ * @defgroup asyncio Asynchronous device I/O
+ *
+ * This page details libusb's asynchronous (non-blocking) API for USB device
+ * I/O. This interface is very powerful but is also quite complex - you will
+ * need to read this page carefully to understand the necessary considerations
+ * and issues surrounding use of this interface. Simplistic applications
+ * may wish to consider the \ref syncio "synchronous I/O API" instead.
+ *
+ * The asynchronous interface is built around the idea of separating transfer
+ * submission and handling of transfer completion (the synchronous model
+ * combines both of these into one). There may be a long delay between
+ * submission and completion, however the asynchronous submission function
+ * is non-blocking so will return control to your application during that
+ * potentially long delay.
+ *
+ * \section asyncabstraction Transfer abstraction
+ *
+ * For the asynchronous I/O, libusb implements the concept of a generic
+ * transfer entity for all types of I/O (control, bulk, interrupt,
+ * isochronous). The generic transfer object must be treated slightly
+ * differently depending on which type of I/O you are performing with it.
+ *
+ * This is represented by the public libusb_transfer structure type.
+ *
+ * \section asynctrf Asynchronous transfers
+ *
+ * We can view asynchronous I/O as a 5 step process:
+ * -# <b>Allocation</b>: allocate a libusb_transfer
+ * -# <b>Filling</b>: populate the libusb_transfer instance with information
+ * about the transfer you wish to perform
+ * -# <b>Submission</b>: ask libusb to submit the transfer
+ * -# <b>Completion handling</b>: examine transfer results in the
+ * libusb_transfer structure
+ * -# <b>Deallocation</b>: clean up resources
+ *
+ *
+ * \subsection asyncalloc Allocation
+ *
+ * This step involves allocating memory for a USB transfer. This is the
+ * generic transfer object mentioned above. At this stage, the transfer
+ * is "blank" with no details about what type of I/O it will be used for.
+ *
+ * Allocation is done with the libusb_alloc_transfer() function. You must use
+ * this function rather than allocating your own transfers.
+ *
+ * \subsection asyncfill Filling
+ *
+ * This step is where you take a previously allocated transfer and fill it
+ * with information to determine the message type and direction, data buffer,
+ * callback function, etc.
+ *
+ * You can either fill the required fields yourself or you can use the
+ * helper functions: libusb_fill_control_transfer(), libusb_fill_bulk_transfer()
+ * and libusb_fill_interrupt_transfer().
+ *
+ * \subsection asyncsubmit Submission
+ *
+ * When you have allocated a transfer and filled it, you can submit it using
+ * libusb_submit_transfer(). This function returns immediately but can be
+ * regarded as firing off the I/O request in the background.
+ *
+ * \subsection asynccomplete Completion handling
+ *
+ * After a transfer has been submitted, one of four things can happen to it:
+ *
+ * - The transfer completes (i.e. some data was transferred)
+ * - The transfer has a timeout and the timeout expires before all data is
+ * transferred
+ * - The transfer fails due to an error
+ * - The transfer is cancelled
+ *
+ * Each of these will cause the user-specified transfer callback function to
+ * be invoked. It is up to the callback function to determine which of the
+ * above actually happened and to act accordingly.
+ *
+ * The user-specified callback is passed a pointer to the libusb_transfer
+ * structure which was used to setup and submit the transfer. At completion
+ * time, libusb has populated this structure with results of the transfer:
+ * success or failure reason, number of bytes of data transferred, etc. See
+ * the libusb_transfer structure documentation for more information.
+ *
+ * \subsection Deallocation
+ *
+ * When a transfer has completed (i.e. the callback function has been invoked),
+ * you are advised to free the transfer (unless you wish to resubmit it, see
+ * below). Transfers are deallocated with libusb_free_transfer().
+ *
+ * It is undefined behaviour to free a transfer which has not completed.
+ *
+ * \section asyncresubmit Resubmission
+ *
+ * You may be wondering why allocation, filling, and submission are all
+ * separated above where they could reasonably be combined into a single
+ * operation.
+ *
+ * The reason for separation is to allow you to resubmit transfers without
+ * having to allocate new ones every time. This is especially useful for
+ * common situations dealing with interrupt endpoints - you allocate one
+ * transfer, fill and submit it, and when it returns with results you just
+ * resubmit it for the next interrupt.
+ *
+ * \section asynccancel Cancellation
+ *
+ * Another advantage of using the asynchronous interface is that you have
+ * the ability to cancel transfers which have not yet completed. This is
+ * done by calling the libusb_cancel_transfer() function.
+ *
+ * libusb_cancel_transfer() is asynchronous/non-blocking in itself. When the
+ * cancellation actually completes, the transfer's callback function will
+ * be invoked, and the callback function should check the transfer status to
+ * determine that it was cancelled.
+ *
+ * Freeing the transfer after it has been cancelled but before cancellation
+ * has completed will result in undefined behaviour.
+ *
+ * When a transfer is cancelled, some of the data may have been transferred.
+ * libusb will communicate this to you in the transfer callback. Do not assume
+ * that no data was transferred.
+ *
+ * \section bulk_overflows Overflows on device-to-host bulk/interrupt endpoints
+ *
+ * If your device does not have predictable transfer sizes (or it misbehaves),
+ * your application may submit a request for data on an IN endpoint which is
+ * smaller than the data that the device wishes to send. In some circumstances
+ * this will cause an overflow, which is a nasty condition to deal with. See
+ * the \ref packetoverflow page for discussion.
+ *
+ * \section asyncctrl Considerations for control transfers
+ *
+ * The <tt>libusb_transfer</tt> structure is generic and hence does not
+ * include specific fields for the control-specific setup packet structure.
+ *
+ * In order to perform a control transfer, you must place the 8-byte setup
+ * packet at the start of the data buffer. To simplify this, you could
+ * cast the buffer pointer to type struct libusb_control_setup, or you can
+ * use the helper function libusb_fill_control_setup().
+ *
+ * The wLength field placed in the setup packet must be the length you would
+ * expect to be sent in the setup packet: the length of the payload that
+ * follows (or the expected maximum number of bytes to receive). However,
+ * the length field of the libusb_transfer object must be the length of
+ * the data buffer - i.e. it should be wLength <em>plus</em> the size of
+ * the setup packet (LIBUSB_CONTROL_SETUP_SIZE).
+ *
+ * If you use the helper functions, this is simplified for you:
+ * -# Allocate a buffer of size LIBUSB_CONTROL_SETUP_SIZE plus the size of the
+ * data you are sending/requesting.
+ * -# Call libusb_fill_control_setup() on the data buffer, using the transfer
+ * request size as the wLength value (i.e. do not include the extra space you
+ * allocated for the control setup).
+ * -# If this is a host-to-device transfer, place the data to be transferred
+ * in the data buffer, starting at offset LIBUSB_CONTROL_SETUP_SIZE.
+ * -# Call libusb_fill_control_transfer() to associate the data buffer with
+ * the transfer (and to set the remaining details such as callback and timeout).
+ * - Note that there is no parameter to set the length field of the transfer.
+ * The length is automatically inferred from the wLength field of the setup
+ * packet.
+ * -# Submit the transfer.
+ *
+ * The multi-byte control setup fields (wValue, wIndex and wLength) must
+ * be given in little-endian byte order (the endianness of the USB bus).
+ * Endianness conversion is transparently handled by
+ * libusb_fill_control_setup() which is documented to accept host-endian
+ * values.
+ *
+ * Further considerations are needed when handling transfer completion in
+ * your callback function:
+ * - As you might expect, the setup packet will still be sitting at the start
+ * of the data buffer.
+ * - If this was a device-to-host transfer, the received data will be sitting
+ * at offset LIBUSB_CONTROL_SETUP_SIZE into the buffer.
+ * - The actual_length field of the transfer structure is relative to the
+ * wLength of the setup packet, rather than the size of the data buffer. So,
+ * if your wLength was 4, your transfer's <tt>length</tt> was 12, then you
+ * should expect an <tt>actual_length</tt> of 4 to indicate that the data was
+ * transferred in entirity.
+ *
+ * To simplify parsing of setup packets and obtaining the data from the
+ * correct offset, you may wish to use the libusb_control_transfer_get_data()
+ * and libusb_control_transfer_get_setup() functions within your transfer
+ * callback.
+ *
+ * Even though control endpoints do not halt, a completed control transfer
+ * may have a LIBUSB_TRANSFER_STALL status code. This indicates the control
+ * request was not supported.
+ *
+ * \section asyncintr Considerations for interrupt transfers
+ *
+ * All interrupt transfers are performed using the polling interval presented
+ * by the bInterval value of the endpoint descriptor.
+ *
+ * \section asynciso Considerations for isochronous transfers
+ *
+ * Isochronous transfers are more complicated than transfers to
+ * non-isochronous endpoints.
+ *
+ * To perform I/O to an isochronous endpoint, allocate the transfer by calling
+ * libusb_alloc_transfer() with an appropriate number of isochronous packets.
+ *
+ * During filling, set \ref libusb_transfer::type "type" to
+ * \ref libusb_transfer_type::LIBUSB_TRANSFER_TYPE_ISOCHRONOUS
+ * "LIBUSB_TRANSFER_TYPE_ISOCHRONOUS", and set
+ * \ref libusb_transfer::num_iso_packets "num_iso_packets" to a value less than
+ * or equal to the number of packets you requested during allocation.
+ * libusb_alloc_transfer() does not set either of these fields for you, given
+ * that you might not even use the transfer on an isochronous endpoint.
+ *
+ * Next, populate the length field for the first num_iso_packets entries in
+ * the \ref libusb_transfer::iso_packet_desc "iso_packet_desc" array. Section
+ * 5.6.3 of the USB2 specifications describe how the maximum isochronous
+ * packet length is determined by the wMaxPacketSize field in the endpoint
+ * descriptor.
+ * Two functions can help you here:
+ *
+ * - libusb_get_max_iso_packet_size() is an easy way to determine the max
+ * packet size for an isochronous endpoint. Note that the maximum packet
+ * size is actually the maximum number of bytes that can be transmitted in
+ * a single microframe, therefore this function multiplies the maximum number
+ * of bytes per transaction by the number of transaction opportunities per
+ * microframe.
+ * - libusb_set_iso_packet_lengths() assigns the same length to all packets
+ * within a transfer, which is usually what you want.
+ *
+ * For outgoing transfers, you'll obviously fill the buffer and populate the
+ * packet descriptors in hope that all the data gets transferred. For incoming
+ * transfers, you must ensure the buffer has sufficient capacity for
+ * the situation where all packets transfer the full amount of requested data.
+ *
+ * Completion handling requires some extra consideration. The
+ * \ref libusb_transfer::actual_length "actual_length" field of the transfer
+ * is meaningless and should not be examined; instead you must refer to the
+ * \ref libusb_iso_packet_descriptor::actual_length "actual_length" field of
+ * each individual packet.
+ *
+ * The \ref libusb_transfer::status "status" field of the transfer is also a
+ * little misleading:
+ * - If the packets were submitted and the isochronous data microframes
+ * completed normally, status will have value
+ * \ref libusb_transfer_status::LIBUSB_TRANSFER_COMPLETED
+ * "LIBUSB_TRANSFER_COMPLETED". Note that bus errors and software-incurred
+ * delays are not counted as transfer errors; the transfer.status field may
+ * indicate COMPLETED even if some or all of the packets failed. Refer to
+ * the \ref libusb_iso_packet_descriptor::status "status" field of each
+ * individual packet to determine packet failures.
+ * - The status field will have value
+ * \ref libusb_transfer_status::LIBUSB_TRANSFER_ERROR
+ * "LIBUSB_TRANSFER_ERROR" only when serious errors were encountered.
+ * - Other transfer status codes occur with normal behaviour.
+ *
+ * The data for each packet will be found at an offset into the buffer that
+ * can be calculated as if each prior packet completed in full. The
+ * libusb_get_iso_packet_buffer() and libusb_get_iso_packet_buffer_simple()
+ * functions may help you here.
+ *
+ * <b>Note</b>: Some operating systems (e.g. Linux) may impose limits on the
+ * length of individual isochronous packets and/or the total length of the
+ * isochronous transfer. Such limits can be difficult for libusb to detect,
+ * so the library will simply try and submit the transfer as set up by you.
+ * If the transfer fails to submit because it is too large,
+ * libusb_submit_transfer() will return
+ * \ref libusb_error::LIBUSB_ERROR_INVALID_PARAM "LIBUSB_ERROR_INVALID_PARAM".
+ *
+ * \section asyncmem Memory caveats
+ *
+ * In most circumstances, it is not safe to use stack memory for transfer
+ * buffers. This is because the function that fired off the asynchronous
+ * transfer may return before libusb has finished using the buffer, and when
+ * the function returns it's stack gets destroyed. This is true for both
+ * host-to-device and device-to-host transfers.
+ *
+ * The only case in which it is safe to use stack memory is where you can
+ * guarantee that the function owning the stack space for the buffer does not
+ * return until after the transfer's callback function has completed. In every
+ * other case, you need to use heap memory instead.
+ *
+ * \section asyncflags Fine control
+ *
+ * Through using this asynchronous interface, you may find yourself repeating
+ * a few simple operations many times. You can apply a bitwise OR of certain
+ * flags to a transfer to simplify certain things:
+ * - \ref libusb_transfer_flags::LIBUSB_TRANSFER_SHORT_NOT_OK
+ * "LIBUSB_TRANSFER_SHORT_NOT_OK" results in transfers which transferred
+ * less than the requested amount of data being marked with status
+ * \ref libusb_transfer_status::LIBUSB_TRANSFER_ERROR "LIBUSB_TRANSFER_ERROR"
+ * (they would normally be regarded as COMPLETED)
+ * - \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_BUFFER
+ * "LIBUSB_TRANSFER_FREE_BUFFER" allows you to ask libusb to free the transfer
+ * buffer when freeing the transfer.
+ * - \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_TRANSFER
+ * "LIBUSB_TRANSFER_FREE_TRANSFER" causes libusb to automatically free the
+ * transfer after the transfer callback returns.
+ *
+ * \section asyncevent Event handling
+ *
+ * An asynchronous model requires that libusb perform work at various
+ * points in time - namely processing the results of previously-submitted
+ * transfers and invoking the user-supplied callback function.
+ *
+ * This gives rise to the libusb_handle_events() function which your
+ * application must call into when libusb has work do to. This gives libusb
+ * the opportunity to reap pending transfers, invoke callbacks, etc.
+ *
+ * There are 2 different approaches to dealing with libusb_handle_events:
+ *
+ * -# Repeatedly call libusb_handle_events() in blocking mode from a dedicated
+ * thread.
+ * -# Integrate libusb with your application's main event loop. libusb
+ * exposes a set of file descriptors which allow you to do this.
+ *
+ * The first approach has the big advantage that it will also work on Windows
+ * were libusb' poll API for select / poll integration is not available. So
+ * if you want to support Windows and use the async API, you must use this
+ * approach, see the \ref eventthread "Using an event handling thread" section
+ * below for details.
+ *
+ * If you prefer a single threaded approach with a single central event loop,
+ * see the \ref poll "polling and timing" section for how to integrate libusb
+ * into your application's main event loop.
+ *
+ * \section eventthread Using an event handling thread
+ *
+ * Lets begin with stating the obvious: If you're going to use a separate
+ * thread for libusb event handling, your callback functions MUST be
+ * threadsafe.
+ *
+ * Other then that doing event handling from a separate thread, is mostly
+ * simple. You can use an event thread function as follows:
+\code
+void *event_thread_func(void *ctx)
+{
+ while (event_thread_run)
+ libusb_handle_events(ctx);
+
+ return NULL;
+}
+\endcode
+ *
+ * There is one caveat though, stopping this thread requires setting the
+ * event_thread_run variable to 0, and after that libusb_handle_events() needs
+ * to return control to event_thread_func. But unless some event happens,
+ * libusb_handle_events() will not return.
+ *
+ * There are 2 different ways of dealing with this, depending on if your
+ * application uses libusb' \ref hotplug "hotplug" support or not.
+ *
+ * Applications which do not use hotplug support, should not start the event
+ * thread until after their first call to libusb_open(), and should stop the
+ * thread when closing the last open device as follows:
+\code
+void my_close_handle(libusb_device_handle *handle)
+{
+ if (open_devs == 1)
+ event_thread_run = 0;
+
+ libusb_close(handle); // This wakes up libusb_handle_events()
+
+ if (open_devs == 1)
+ pthread_join(event_thread);
+
+ open_devs--;
+}
+\endcode
+ *
+ * Applications using hotplug support should start the thread at program init,
+ * after having successfully called libusb_hotplug_register_callback(), and
+ * should stop the thread at program exit as follows:
+\code
+void my_libusb_exit(void)
+{
+ event_thread_run = 0;
+ libusb_hotplug_deregister_callback(ctx, hotplug_cb_handle); // This wakes up libusb_handle_events()
+ pthread_join(event_thread);
+ libusb_exit(ctx);
+}
+\endcode
+ */
+
+/**
+ * @defgroup poll Polling and timing
+ *
+ * This page documents libusb's functions for polling events and timing.
+ * These functions are only necessary for users of the
+ * \ref asyncio "asynchronous API". If you are only using the simpler
+ * \ref syncio "synchronous API" then you do not need to ever call these
+ * functions.
+ *
+ * The justification for the functionality described here has already been
+ * discussed in the \ref asyncevent "event handling" section of the
+ * asynchronous API documentation. In summary, libusb does not create internal
+ * threads for event processing and hence relies on your application calling
+ * into libusb at certain points in time so that pending events can be handled.
+ *
+ * Your main loop is probably already calling poll() or select() or a
+ * variant on a set of file descriptors for other event sources (e.g. keyboard
+ * button presses, mouse movements, network sockets, etc). You then add
+ * libusb's file descriptors to your poll()/select() calls, and when activity
+ * is detected on such descriptors you know it is time to call
+ * libusb_handle_events().
+ *
+ * There is one final event handling complication. libusb supports
+ * asynchronous transfers which time out after a specified time period.
+ *
+ * On some platforms a timerfd is used, so the timeout handling is just another
+ * fd, on other platforms this requires that libusb is called into at or after
+ * the timeout to handle it. So, in addition to considering libusb's file
+ * descriptors in your main event loop, you must also consider that libusb
+ * sometimes needs to be called into at fixed points in time even when there
+ * is no file descriptor activity, see \ref polltime details.
+ *
+ * In order to know precisely when libusb needs to be called into, libusb
+ * offers you a set of pollable file descriptors and information about when
+ * the next timeout expires.
+ *
+ * If you are using the asynchronous I/O API, you must take one of the two
+ * following options, otherwise your I/O will not complete.
+ *
+ * \section pollsimple The simple option
+ *
+ * If your application revolves solely around libusb and does not need to
+ * handle other event sources, you can have a program structure as follows:
+\code
+// initialize libusb
+// find and open device
+// maybe fire off some initial async I/O
+
+while (user_has_not_requested_exit)
+ libusb_handle_events(ctx);
+
+// clean up and exit
+\endcode
+ *
+ * With such a simple main loop, you do not have to worry about managing
+ * sets of file descriptors or handling timeouts. libusb_handle_events() will
+ * handle those details internally.
+ *
+ * \section pollmain The more advanced option
+ *
+ * \note This functionality is currently only available on Unix-like platforms.
+ * On Windows, libusb_get_pollfds() simply returns NULL. Applications which
+ * want to support Windows are advised to use an \ref eventthread
+ * "event handling thread" instead.
+ *
+ * In more advanced applications, you will already have a main loop which
+ * is monitoring other event sources: network sockets, X11 events, mouse
+ * movements, etc. Through exposing a set of file descriptors, libusb is
+ * designed to cleanly integrate into such main loops.
+ *
+ * In addition to polling file descriptors for the other event sources, you
+ * take a set of file descriptors from libusb and monitor those too. When you
+ * detect activity on libusb's file descriptors, you call
+ * libusb_handle_events_timeout() in non-blocking mode.
+ *
+ * What's more, libusb may also need to handle events at specific moments in
+ * time. No file descriptor activity is generated at these times, so your
+ * own application needs to be continually aware of when the next one of these
+ * moments occurs (through calling libusb_get_next_timeout()), and then it
+ * needs to call libusb_handle_events_timeout() in non-blocking mode when
+ * these moments occur. This means that you need to adjust your
+ * poll()/select() timeout accordingly.
+ *
+ * libusb provides you with a set of file descriptors to poll and expects you
+ * to poll all of them, treating them as a single entity. The meaning of each
+ * file descriptor in the set is an internal implementation detail,
+ * platform-dependent and may vary from release to release. Don't try and
+ * interpret the meaning of the file descriptors, just do as libusb indicates,
+ * polling all of them at once.
+ *
+ * In pseudo-code, you want something that looks like:
+\code
+// initialise libusb
+
+libusb_get_pollfds(ctx)
+while (user has not requested application exit) {
+ libusb_get_next_timeout(ctx);
+ poll(on libusb file descriptors plus any other event sources of interest,
+ using a timeout no larger than the value libusb just suggested)
+ if (poll() indicated activity on libusb file descriptors)
+ libusb_handle_events_timeout(ctx, &zero_tv);
+ if (time has elapsed to or beyond the libusb timeout)
+ libusb_handle_events_timeout(ctx, &zero_tv);
+ // handle events from other sources here
+}
+
+// clean up and exit
+\endcode
+ *
+ * \subsection polltime Notes on time-based events
+ *
+ * The above complication with having to track time and call into libusb at
+ * specific moments is a bit of a headache. For maximum compatibility, you do
+ * need to write your main loop as above, but you may decide that you can
+ * restrict the supported platforms of your application and get away with
+ * a more simplistic scheme.
+ *
+ * These time-based event complications are \b not required on the following
+ * platforms:
+ * - Darwin
+ * - Linux, provided that the following version requirements are satisfied:
+ * - Linux v2.6.27 or newer, compiled with timerfd support
+ * - glibc v2.9 or newer
+ * - libusb v1.0.5 or newer
+ *
+ * Under these configurations, libusb_get_next_timeout() will \em always return
+ * 0, so your main loop can be simplified to:
+\code
+// initialise libusb
+
+libusb_get_pollfds(ctx)
+while (user has not requested application exit) {
+ poll(on libusb file descriptors plus any other event sources of interest,
+ using any timeout that you like)
+ if (poll() indicated activity on libusb file descriptors)
+ libusb_handle_events_timeout(ctx, &zero_tv);
+ // handle events from other sources here
+}
+
+// clean up and exit
+\endcode
+ *
+ * Do remember that if you simplify your main loop to the above, you will
+ * lose compatibility with some platforms (including legacy Linux platforms,
+ * and <em>any future platforms supported by libusb which may have time-based
+ * event requirements</em>). The resultant problems will likely appear as
+ * strange bugs in your application.
+ *
+ * You can use the libusb_pollfds_handle_timeouts() function to do a runtime
+ * check to see if it is safe to ignore the time-based event complications.
+ * If your application has taken the shortcut of ignoring libusb's next timeout
+ * in your main loop, then you are advised to check the return value of
+ * libusb_pollfds_handle_timeouts() during application startup, and to abort
+ * if the platform does suffer from these timing complications.
+ *
+ * \subsection fdsetchange Changes in the file descriptor set
+ *
+ * The set of file descriptors that libusb uses as event sources may change
+ * during the life of your application. Rather than having to repeatedly
+ * call libusb_get_pollfds(), you can set up notification functions for when
+ * the file descriptor set changes using libusb_set_pollfd_notifiers().
+ *
+ * \subsection mtissues Multi-threaded considerations
+ *
+ * Unfortunately, the situation is complicated further when multiple threads
+ * come into play. If two threads are monitoring the same file descriptors,
+ * the fact that only one thread will be woken up when an event occurs causes
+ * some headaches.
+ *
+ * The events lock, event waiters lock, and libusb_handle_events_locked()
+ * entities are added to solve these problems. You do not need to be concerned
+ * with these entities otherwise.
+ *
+ * See the extra documentation: \ref mtasync
+ */
+
+/** \page mtasync Multi-threaded applications and asynchronous I/O
+ *
+ * libusb is a thread-safe library, but extra considerations must be applied
+ * to applications which interact with libusb from multiple threads.
+ *
+ * The underlying issue that must be addressed is that all libusb I/O
+ * revolves around monitoring file descriptors through the poll()/select()
+ * system calls. This is directly exposed at the
+ * \ref asyncio "asynchronous interface" but it is important to note that the
+ * \ref syncio "synchronous interface" is implemented on top of the
+ * asynchonrous interface, therefore the same considerations apply.
+ *
+ * The issue is that if two or more threads are concurrently calling poll()
+ * or select() on libusb's file descriptors then only one of those threads
+ * will be woken up when an event arrives. The others will be completely
+ * oblivious that anything has happened.
+ *
+ * Consider the following pseudo-code, which submits an asynchronous transfer
+ * then waits for its completion. This style is one way you could implement a
+ * synchronous interface on top of the asynchronous interface (and libusb
+ * does something similar, albeit more advanced due to the complications
+ * explained on this page).
+ *
+\code
+void cb(struct libusb_transfer *transfer)
+{
+ int *completed = transfer->user_data;
+ *completed = 1;
+}
+
+void myfunc() {
+ struct libusb_transfer *transfer;
+ unsigned char buffer[LIBUSB_CONTROL_SETUP_SIZE] __attribute__ ((aligned (2)));
+ int completed = 0;
+
+ transfer = libusb_alloc_transfer(0);
+ libusb_fill_control_setup(buffer,
+ LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT, 0x04, 0x01, 0, 0);
+ libusb_fill_control_transfer(transfer, dev, buffer, cb, &completed, 1000);
+ libusb_submit_transfer(transfer);
+
+ while (!completed) {
+ poll(libusb file descriptors, 120*1000);
+ if (poll indicates activity)
+ libusb_handle_events_timeout(ctx, &zero_tv);
+ }
+ printf("completed!");
+ // other code here
+}
+\endcode
+ *
+ * Here we are <em>serializing</em> completion of an asynchronous event
+ * against a condition - the condition being completion of a specific transfer.
+ * The poll() loop has a long timeout to minimize CPU usage during situations
+ * when nothing is happening (it could reasonably be unlimited).
+ *
+ * If this is the only thread that is polling libusb's file descriptors, there
+ * is no problem: there is no danger that another thread will swallow up the
+ * event that we are interested in. On the other hand, if there is another
+ * thread polling the same descriptors, there is a chance that it will receive
+ * the event that we were interested in. In this situation, <tt>myfunc()</tt>
+ * will only realise that the transfer has completed on the next iteration of
+ * the loop, <em>up to 120 seconds later.</em> Clearly a two-minute delay is
+ * undesirable, and don't even think about using short timeouts to circumvent
+ * this issue!
+ *
+ * The solution here is to ensure that no two threads are ever polling the
+ * file descriptors at the same time. A naive implementation of this would
+ * impact the capabilities of the library, so libusb offers the scheme
+ * documented below to ensure no loss of functionality.
+ *
+ * Before we go any further, it is worth mentioning that all libusb-wrapped
+ * event handling procedures fully adhere to the scheme documented below.
+ * This includes libusb_handle_events() and its variants, and all the
+ * synchronous I/O functions - libusb hides this headache from you.
+ *
+ * \section Using libusb_handle_events() from multiple threads
+ *
+ * Even when only using libusb_handle_events() and synchronous I/O functions,
+ * you can still have a race condition. You might be tempted to solve the
+ * above with libusb_handle_events() like so:
+ *
+\code
+ libusb_submit_transfer(transfer);
+
+ while (!completed) {
+ libusb_handle_events(ctx);
+ }
+ printf("completed!");
+\endcode
+ *
+ * This however has a race between the checking of completed and
+ * libusb_handle_events() acquiring the events lock, so another thread
+ * could have completed the transfer, resulting in this thread hanging
+ * until either a timeout or another event occurs. See also commit
+ * 6696512aade99bb15d6792af90ae329af270eba6 which fixes this in the
+ * synchronous API implementation of libusb.
+ *
+ * Fixing this race requires checking the variable completed only after
+ * taking the event lock, which defeats the concept of just calling
+ * libusb_handle_events() without worrying about locking. This is why
+ * libusb-1.0.9 introduces the new libusb_handle_events_timeout_completed()
+ * and libusb_handle_events_completed() functions, which handles doing the
+ * completion check for you after they have acquired the lock:
+ *
+\code
+ libusb_submit_transfer(transfer);
+
+ while (!completed) {
+ libusb_handle_events_completed(ctx, &completed);
+ }
+ printf("completed!");
+\endcode
+ *
+ * This nicely fixes the race in our example. Note that if all you want to
+ * do is submit a single transfer and wait for its completion, then using
+ * one of the synchronous I/O functions is much easier.
+ *
+ * \section eventlock The events lock
+ *
+ * The problem is when we consider the fact that libusb exposes file
+ * descriptors to allow for you to integrate asynchronous USB I/O into
+ * existing main loops, effectively allowing you to do some work behind
+ * libusb's back. If you do take libusb's file descriptors and pass them to
+ * poll()/select() yourself, you need to be aware of the associated issues.
+ *
+ * The first concept to be introduced is the events lock. The events lock
+ * is used to serialize threads that want to handle events, such that only
+ * one thread is handling events at any one time.
+ *
+ * You must take the events lock before polling libusb file descriptors,
+ * using libusb_lock_events(). You must release the lock as soon as you have
+ * aborted your poll()/select() loop, using libusb_unlock_events().
+ *
+ * \section threadwait Letting other threads do the work for you
+ *
+ * Although the events lock is a critical part of the solution, it is not
+ * enough on it's own. You might wonder if the following is sufficient...
+\code
+ libusb_lock_events(ctx);
+ while (!completed) {
+ poll(libusb file descriptors, 120*1000);
+ if (poll indicates activity)
+ libusb_handle_events_timeout(ctx, &zero_tv);
+ }
+ libusb_unlock_events(ctx);
+\endcode
+ * ...and the answer is that it is not. This is because the transfer in the
+ * code shown above may take a long time (say 30 seconds) to complete, and
+ * the lock is not released until the transfer is completed.
+ *
+ * Another thread with similar code that wants to do event handling may be
+ * working with a transfer that completes after a few milliseconds. Despite
+ * having such a quick completion time, the other thread cannot check that
+ * status of its transfer until the code above has finished (30 seconds later)
+ * due to contention on the lock.
+ *
+ * To solve this, libusb offers you a mechanism to determine when another
+ * thread is handling events. It also offers a mechanism to block your thread
+ * until the event handling thread has completed an event (and this mechanism
+ * does not involve polling of file descriptors).
+ *
+ * After determining that another thread is currently handling events, you
+ * obtain the <em>event waiters</em> lock using libusb_lock_event_waiters().
+ * You then re-check that some other thread is still handling events, and if
+ * so, you call libusb_wait_for_event().
+ *
+ * libusb_wait_for_event() puts your application to sleep until an event
+ * occurs, or until a thread releases the events lock. When either of these
+ * things happen, your thread is woken up, and should re-check the condition
+ * it was waiting on. It should also re-check that another thread is handling
+ * events, and if not, it should start handling events itself.
+ *
+ * This looks like the following, as pseudo-code:
+\code
+retry:
+if (libusb_try_lock_events(ctx) == 0) {
+ // we obtained the event lock: do our own event handling
+ while (!completed) {
+ if (!libusb_event_handling_ok(ctx)) {
+ libusb_unlock_events(ctx);
+ goto retry;
+ }
+ poll(libusb file descriptors, 120*1000);
+ if (poll indicates activity)
+ libusb_handle_events_locked(ctx, 0);
+ }
+ libusb_unlock_events(ctx);
+} else {
+ // another thread is doing event handling. wait for it to signal us that
+ // an event has completed
+ libusb_lock_event_waiters(ctx);
+
+ while (!completed) {
+ // now that we have the event waiters lock, double check that another
+ // thread is still handling events for us. (it may have ceased handling
+ // events in the time it took us to reach this point)
+ if (!libusb_event_handler_active(ctx)) {
+ // whoever was handling events is no longer doing so, try again
+ libusb_unlock_event_waiters(ctx);
+ goto retry;
+ }
+
+ libusb_wait_for_event(ctx, NULL);
+ }
+ libusb_unlock_event_waiters(ctx);
+}
+printf("completed!\n");
+\endcode
+ *
+ * A naive look at the above code may suggest that this can only support
+ * one event waiter (hence a total of 2 competing threads, the other doing
+ * event handling), because the event waiter seems to have taken the event
+ * waiters lock while waiting for an event. However, the system does support
+ * multiple event waiters, because libusb_wait_for_event() actually drops
+ * the lock while waiting, and reaquires it before continuing.
+ *
+ * We have now implemented code which can dynamically handle situations where
+ * nobody is handling events (so we should do it ourselves), and it can also
+ * handle situations where another thread is doing event handling (so we can
+ * piggyback onto them). It is also equipped to handle a combination of
+ * the two, for example, another thread is doing event handling, but for
+ * whatever reason it stops doing so before our condition is met, so we take
+ * over the event handling.
+ *
+ * Four functions were introduced in the above pseudo-code. Their importance
+ * should be apparent from the code shown above.
+ * -# libusb_try_lock_events() is a non-blocking function which attempts
+ * to acquire the events lock but returns a failure code if it is contended.
+ * -# libusb_event_handling_ok() checks that libusb is still happy for your
+ * thread to be performing event handling. Sometimes, libusb needs to
+ * interrupt the event handler, and this is how you can check if you have
+ * been interrupted. If this function returns 0, the correct behaviour is
+ * for you to give up the event handling lock, and then to repeat the cycle.
+ * The following libusb_try_lock_events() will fail, so you will become an
+ * events waiter. For more information on this, read \ref fullstory below.
+ * -# libusb_handle_events_locked() is a variant of
+ * libusb_handle_events_timeout() that you can call while holding the
+ * events lock. libusb_handle_events_timeout() itself implements similar
+ * logic to the above, so be sure not to call it when you are
+ * "working behind libusb's back", as is the case here.
+ * -# libusb_event_handler_active() determines if someone is currently
+ * holding the events lock
+ *
+ * You might be wondering why there is no function to wake up all threads
+ * blocked on libusb_wait_for_event(). This is because libusb can do this
+ * internally: it will wake up all such threads when someone calls
+ * libusb_unlock_events() or when a transfer completes (at the point after its
+ * callback has returned).
+ *
+ * \subsection fullstory The full story
+ *
+ * The above explanation should be enough to get you going, but if you're
+ * really thinking through the issues then you may be left with some more
+ * questions regarding libusb's internals. If you're curious, read on, and if
+ * not, skip to the next section to avoid confusing yourself!
+ *
+ * The immediate question that may spring to mind is: what if one thread
+ * modifies the set of file descriptors that need to be polled while another
+ * thread is doing event handling?
+ *
+ * There are 2 situations in which this may happen.
+ * -# libusb_open() will add another file descriptor to the poll set,
+ * therefore it is desirable to interrupt the event handler so that it
+ * restarts, picking up the new descriptor.
+ * -# libusb_close() will remove a file descriptor from the poll set. There
+ * are all kinds of race conditions that could arise here, so it is
+ * important that nobody is doing event handling at this time.
+ *
+ * libusb handles these issues internally, so application developers do not
+ * have to stop their event handlers while opening/closing devices. Here's how
+ * it works, focusing on the libusb_close() situation first:
+ *
+ * -# During initialization, libusb opens an internal pipe, and it adds the read
+ * end of this pipe to the set of file descriptors to be polled.
+ * -# During libusb_close(), libusb writes some dummy data on this event pipe.
+ * This immediately interrupts the event handler. libusb also records
+ * internally that it is trying to interrupt event handlers for this
+ * high-priority event.
+ * -# At this point, some of the functions described above start behaving
+ * differently:
+ * - libusb_event_handling_ok() starts returning 1, indicating that it is NOT
+ * OK for event handling to continue.
+ * - libusb_try_lock_events() starts returning 1, indicating that another
+ * thread holds the event handling lock, even if the lock is uncontended.
+ * - libusb_event_handler_active() starts returning 1, indicating that
+ * another thread is doing event handling, even if that is not true.
+ * -# The above changes in behaviour result in the event handler stopping and
+ * giving up the events lock very quickly, giving the high-priority
+ * libusb_close() operation a "free ride" to acquire the events lock. All
+ * threads that are competing to do event handling become event waiters.
+ * -# With the events lock held inside libusb_close(), libusb can safely remove
+ * a file descriptor from the poll set, in the safety of knowledge that
+ * nobody is polling those descriptors or trying to access the poll set.
+ * -# After obtaining the events lock, the close operation completes very
+ * quickly (usually a matter of milliseconds) and then immediately releases
+ * the events lock.
+ * -# At the same time, the behaviour of libusb_event_handling_ok() and friends
+ * reverts to the original, documented behaviour.
+ * -# The release of the events lock causes the threads that are waiting for
+ * events to be woken up and to start competing to become event handlers
+ * again. One of them will succeed; it will then re-obtain the list of poll
+ * descriptors, and USB I/O will then continue as normal.
+ *
+ * libusb_open() is similar, and is actually a more simplistic case. Upon a
+ * call to libusb_open():
+ *
+ * -# The device is opened and a file descriptor is added to the poll set.
+ * -# libusb sends some dummy data on the event pipe, and records that it
+ * is trying to modify the poll descriptor set.
+ * -# The event handler is interrupted, and the same behaviour change as for
+ * libusb_close() takes effect, causing all event handling threads to become
+ * event waiters.
+ * -# The libusb_open() implementation takes its free ride to the events lock.
+ * -# Happy that it has successfully paused the events handler, libusb_open()
+ * releases the events lock.
+ * -# The event waiter threads are all woken up and compete to become event
+ * handlers again. The one that succeeds will obtain the list of poll
+ * descriptors again, which will include the addition of the new device.
+ *
+ * \subsection concl Closing remarks
+ *
+ * The above may seem a little complicated, but hopefully I have made it clear
+ * why such complications are necessary. Also, do not forget that this only
+ * applies to applications that take libusb's file descriptors and integrate
+ * them into their own polling loops.
+ *
+ * You may decide that it is OK for your multi-threaded application to ignore
+ * some of the rules and locks detailed above, because you don't think that
+ * two threads can ever be polling the descriptors at the same time. If that
+ * is the case, then that's good news for you because you don't have to worry.
+ * But be careful here; remember that the synchronous I/O functions do event
+ * handling internally. If you have one thread doing event handling in a loop
+ * (without implementing the rules and locking semantics documented above)
+ * and another trying to send a synchronous USB transfer, you will end up with
+ * two threads monitoring the same descriptors, and the above-described
+ * undesirable behaviour occuring. The solution is for your polling thread to
+ * play by the rules; the synchronous I/O functions do so, and this will result
+ * in them getting along in perfect harmony.
+ *
+ * If you do have a dedicated thread doing event handling, it is perfectly
+ * legal for it to take the event handling lock for long periods of time. Any
+ * synchronous I/O functions you call from other threads will transparently
+ * fall back to the "event waiters" mechanism detailed above. The only
+ * consideration that your event handling thread must apply is the one related
+ * to libusb_event_handling_ok(): you must call this before every poll(), and
+ * give up the events lock if instructed.
+ */
+
+int usbi_io_init(struct libusb_context *ctx)
+{
+ int r;
+
+ usbi_mutex_init(&ctx->flying_transfers_lock, NULL);
+ usbi_mutex_init_recursive(&ctx->events_lock, NULL);
+ usbi_mutex_init(&ctx->event_waiters_lock, NULL);
+ usbi_cond_init(&ctx->event_waiters_cond, NULL);
+ usbi_mutex_init(&ctx->event_data_lock, NULL);
+ list_init(&ctx->flying_transfers);
+ list_init(&ctx->ipollfds);
+ list_init(&ctx->hotplug_msgs);
+ list_init(&ctx->completed_transfers);
+
+ /* FIXME should use an eventfd on kernels that support it */
+ r = usbi_pipe(ctx->event_pipe);
+ if (r < 0) {
+ r = LIBUSB_ERROR_OTHER;
+ goto err;
+ }
+
+ r = usbi_add_pollfd(ctx, ctx->event_pipe[0], POLLIN);
+ if (r < 0)
+ goto err_close_pipe;
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ ctx->timerfd = timerfd_create(usbi_backend->get_timerfd_clockid(),
+ TFD_NONBLOCK);
+ if (ctx->timerfd >= 0) {
+ usbi_dbg("using timerfd for timeouts");
+ r = usbi_add_pollfd(ctx, ctx->timerfd, POLLIN);
+ if (r < 0)
+ goto err_close_timerfd;
+ } else {
+ usbi_dbg("timerfd not available (code %d error %d)", ctx->timerfd, errno);
+ ctx->timerfd = -1;
+ }
+#endif
+
+ return 0;
+
+#ifdef USBI_TIMERFD_AVAILABLE
+err_close_timerfd:
+ close(ctx->timerfd);
+ usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
+#endif
+err_close_pipe:
+ usbi_close(ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[1]);
+err:
+ usbi_mutex_destroy(&ctx->flying_transfers_lock);
+ usbi_mutex_destroy(&ctx->events_lock);
+ usbi_mutex_destroy(&ctx->event_waiters_lock);
+ usbi_cond_destroy(&ctx->event_waiters_cond);
+ usbi_mutex_destroy(&ctx->event_data_lock);
+ return r;
+}
+
+void usbi_io_exit(struct libusb_context *ctx)
+{
+ usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[1]);
+#ifdef USBI_TIMERFD_AVAILABLE
+ if (usbi_using_timerfd(ctx)) {
+ usbi_remove_pollfd(ctx, ctx->timerfd);
+ close(ctx->timerfd);
+ }
+#endif
+ usbi_mutex_destroy(&ctx->flying_transfers_lock);
+ usbi_mutex_destroy(&ctx->events_lock);
+ usbi_mutex_destroy(&ctx->event_waiters_lock);
+ usbi_cond_destroy(&ctx->event_waiters_cond);
+ usbi_mutex_destroy(&ctx->event_data_lock);
+ if (ctx->pollfds)
+ free(ctx->pollfds);
+}
+
+static int calculate_timeout(struct usbi_transfer *transfer)
+{
+ int r;
+ struct timespec current_time;
+ unsigned int timeout =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout;
+
+ if (!timeout)
+ return 0;
+
+ r = usbi_backend->clock_gettime(USBI_CLOCK_MONOTONIC, ¤t_time);
+ if (r < 0) {
+ usbi_err(ITRANSFER_CTX(transfer),
+ "failed to read monotonic clock, errno=%d", errno);
+ return r;
+ }
+
+ current_time.tv_sec += timeout / 1000;
+ current_time.tv_nsec += (timeout % 1000) * 1000000;
+
+ while (current_time.tv_nsec >= 1000000000) {
+ current_time.tv_nsec -= 1000000000;
+ current_time.tv_sec++;
+ }
+
+ TIMESPEC_TO_TIMEVAL(&transfer->timeout, ¤t_time);
+ return 0;
+}
+
+/** \ingroup asyncio
+ * Allocate a libusb transfer with a specified number of isochronous packet
+ * descriptors. The returned transfer is pre-initialized for you. When the new
+ * transfer is no longer needed, it should be freed with
+ * libusb_free_transfer().
+ *
+ * Transfers intended for non-isochronous endpoints (e.g. control, bulk,
+ * interrupt) should specify an iso_packets count of zero.
+ *
+ * For transfers intended for isochronous endpoints, specify an appropriate
+ * number of packet descriptors to be allocated as part of the transfer.
+ * The returned transfer is not specially initialized for isochronous I/O;
+ * you are still required to set the
+ * \ref libusb_transfer::num_iso_packets "num_iso_packets" and
+ * \ref libusb_transfer::type "type" fields accordingly.
+ *
+ * It is safe to allocate a transfer with some isochronous packets and then
+ * use it on a non-isochronous endpoint. If you do this, ensure that at time
+ * of submission, num_iso_packets is 0 and that type is set appropriately.
+ *
+ * \param iso_packets number of isochronous packet descriptors to allocate
+ * \returns a newly allocated transfer, or NULL on error
+ */
+DEFAULT_VISIBILITY
+struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(
+ int iso_packets)
+{
+ struct libusb_transfer *transfer;
+ size_t os_alloc_size = usbi_backend->transfer_priv_size;
+ size_t alloc_size = sizeof(struct usbi_transfer)
+ + sizeof(struct libusb_transfer)
+ + (sizeof(struct libusb_iso_packet_descriptor) * iso_packets)
+ + os_alloc_size;
+ struct usbi_transfer *itransfer = calloc(1, alloc_size);
+ if (!itransfer)
+ return NULL;
+
+ itransfer->num_iso_packets = iso_packets;
+ usbi_mutex_init(&itransfer->lock, NULL);
+ usbi_mutex_init(&itransfer->flags_lock, NULL);
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ usbi_dbg("transfer %p", transfer);
+ return transfer;
+}
+
+/** \ingroup asyncio
+ * Free a transfer structure. This should be called for all transfers
+ * allocated with libusb_alloc_transfer().
+ *
+ * If the \ref libusb_transfer_flags::LIBUSB_TRANSFER_FREE_BUFFER
+ * "LIBUSB_TRANSFER_FREE_BUFFER" flag is set and the transfer buffer is
+ * non-NULL, this function will also free the transfer buffer using the
+ * standard system memory allocator (e.g. free()).
+ *
+ * It is legal to call this function with a NULL transfer. In this case,
+ * the function will simply return safely.
+ *
+ * It is not legal to free an active transfer (one which has been submitted
+ * and has not yet completed).
+ *
+ * \param transfer the transfer to free
+ */
+void API_EXPORTED libusb_free_transfer(struct libusb_transfer *transfer)
+{
+ struct usbi_transfer *itransfer;
+ if (!transfer)
+ return;
+
+ usbi_dbg("transfer %p", transfer);
+ if (transfer->flags & LIBUSB_TRANSFER_FREE_BUFFER && transfer->buffer)
+ free(transfer->buffer);
+
+ itransfer = LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+ usbi_mutex_destroy(&itransfer->lock);
+ usbi_mutex_destroy(&itransfer->flags_lock);
+ free(itransfer);
+}
+
+#ifdef USBI_TIMERFD_AVAILABLE
+static int disarm_timerfd(struct libusb_context *ctx)
+{
+ const struct itimerspec disarm_timer = { { 0, 0 }, { 0, 0 } };
+ int r;
+
+ usbi_dbg("");
+ r = timerfd_settime(ctx->timerfd, 0, &disarm_timer, NULL);
+ if (r < 0)
+ return LIBUSB_ERROR_OTHER;
+ else
+ return 0;
+}
+
+/* iterates through the flying transfers, and rearms the timerfd based on the
+ * next upcoming timeout.
+ * must be called with flying_list locked.
+ * returns 0 on success or a LIBUSB_ERROR code on failure.
+ */
+static int arm_timerfd_for_next_timeout(struct libusb_context *ctx)
+{
+ struct usbi_transfer *transfer;
+
+ list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
+ struct timeval *cur_tv = &transfer->timeout;
+
+ /* if we've reached transfers of infinite timeout, then we have no
+ * arming to do */
+ if (!timerisset(cur_tv))
+ goto disarm;
+
+ /* act on first transfer that is not already cancelled */
+ if (!(transfer->flags & USBI_TRANSFER_TIMEOUT_HANDLED)) {
+ int r;
+ const struct itimerspec it = { {0, 0},
+ { cur_tv->tv_sec, cur_tv->tv_usec * 1000 } };
+ usbi_dbg("next timeout originally %dms", USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
+ r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
+ if (r < 0)
+ return LIBUSB_ERROR_OTHER;
+ return 0;
+ }
+ }
+
+disarm:
+ return disarm_timerfd(ctx);
+}
+#else
+static int arm_timerfd_for_next_timeout(struct libusb_context *ctx)
+{
+ (void)ctx;
+ return 0;
+}
+#endif
+
+/* add a transfer to the (timeout-sorted) active transfers list.
+ * This function will return non 0 if fails to update the timer,
+ * in which case the transfer is *not* on the flying_transfers list. */
+static int add_to_flying_list(struct usbi_transfer *transfer)
+{
+ struct usbi_transfer *cur;
+ struct timeval *timeout = &transfer->timeout;
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int r = 0;
+ int first = 1;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+
+ /* if we have no other flying transfers, start the list with this one */
+ if (list_empty(&ctx->flying_transfers)) {
+ list_add(&transfer->list, &ctx->flying_transfers);
+ goto out;
+ }
+
+ /* if we have infinite timeout, append to end of list */
+ if (!timerisset(timeout)) {
+ list_add_tail(&transfer->list, &ctx->flying_transfers);
+ /* first is irrelevant in this case */
+ goto out;
+ }
+
+ /* otherwise, find appropriate place in list */
+ list_for_each_entry(cur, &ctx->flying_transfers, list, struct usbi_transfer) {
+ /* find first timeout that occurs after the transfer in question */
+ struct timeval *cur_tv = &cur->timeout;
+
+ if (!timerisset(cur_tv) || (cur_tv->tv_sec > timeout->tv_sec) ||
+ (cur_tv->tv_sec == timeout->tv_sec &&
+ cur_tv->tv_usec > timeout->tv_usec)) {
+ list_add_tail(&transfer->list, &cur->list);
+ goto out;
+ }
+ first = 0;
+ }
+ /* first is 0 at this stage (list not empty) */
+
+ /* otherwise we need to be inserted at the end */
+ list_add_tail(&transfer->list, &ctx->flying_transfers);
+out:
+#ifdef USBI_TIMERFD_AVAILABLE
+ if (first && usbi_using_timerfd(ctx) && timerisset(timeout)) {
+ /* if this transfer has the lowest timeout of all active transfers,
+ * rearm the timerfd with this transfer's timeout */
+ const struct itimerspec it = { {0, 0},
+ { timeout->tv_sec, timeout->tv_usec * 1000 } };
+ usbi_dbg("arm timerfd for timeout in %dms (first in line)",
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
+ r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
+ if (r < 0) {
+ usbi_warn(ctx, "failed to arm first timerfd (errno %d)", errno);
+ r = LIBUSB_ERROR_OTHER;
+ }
+ }
+#else
+ UNUSED(first);
+#endif
+
+ if (r)
+ list_del(&transfer->list);
+
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+ return r;
+}
+
+/* remove a transfer from the active transfers list.
+ * This function will *always* remove the transfer from the
+ * flying_transfers list. It will return a LIBUSB_ERROR code
+ * if it fails to update the timer for the next timeout. */
+static int remove_from_flying_list(struct usbi_transfer *transfer)
+{
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int rearm_timerfd;
+ int r = 0;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ rearm_timerfd = (timerisset(&transfer->timeout) &&
+ list_first_entry(&ctx->flying_transfers, struct usbi_transfer, list) == transfer);
+ list_del(&transfer->list);
+ if (usbi_using_timerfd(ctx) && rearm_timerfd)
+ r = arm_timerfd_for_next_timeout(ctx);
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ return r;
+}
+
+/** \ingroup asyncio
+ * Submit a transfer. This function will fire off the USB transfer and then
+ * return immediately.
+ *
+ * \param transfer the transfer to submit
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns LIBUSB_ERROR_BUSY if the transfer has already been submitted.
+ * \returns LIBUSB_ERROR_NOT_SUPPORTED if the transfer flags are not supported
+ * by the operating system.
+ * \returns another LIBUSB_ERROR code on other failure
+ */
+int API_EXPORTED libusb_submit_transfer(struct libusb_transfer *transfer)
+{
+ struct usbi_transfer *itransfer =
+ LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+ int remove = 0;
+ int r;
+
+ usbi_dbg("transfer %p", transfer);
+ usbi_mutex_lock(&itransfer->lock);
+ usbi_mutex_lock(&itransfer->flags_lock);
+ if (itransfer->flags & USBI_TRANSFER_IN_FLIGHT) {
+ r = LIBUSB_ERROR_BUSY;
+ goto out;
+ }
+ itransfer->transferred = 0;
+ itransfer->flags = 0;
+ r = calculate_timeout(itransfer);
+ if (r < 0) {
+ r = LIBUSB_ERROR_OTHER;
+ goto out;
+ }
+ itransfer->flags |= USBI_TRANSFER_SUBMITTING;
+ usbi_mutex_unlock(&itransfer->flags_lock);
+
+ r = add_to_flying_list(itransfer);
+ if (r) {
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags = 0;
+ goto out;
+ }
+
+ /* keep a reference to this device */
+ libusb_ref_device(transfer->dev_handle->dev);
+ r = usbi_backend->submit_transfer(itransfer);
+
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags &= ~USBI_TRANSFER_SUBMITTING;
+ if (r == LIBUSB_SUCCESS) {
+ /* check for two possible special conditions:
+ * 1) device disconnect occurred immediately after submission
+ * 2) transfer completed before we got here to update the flags
+ */
+ if (itransfer->flags & USBI_TRANSFER_DEVICE_DISAPPEARED) {
+ usbi_backend->clear_transfer_priv(itransfer);
+ remove = 1;
+ r = LIBUSB_ERROR_NO_DEVICE;
+ }
+ else if (!(itransfer->flags & USBI_TRANSFER_COMPLETED)) {
+ itransfer->flags |= USBI_TRANSFER_IN_FLIGHT;
+ }
+ } else {
+ remove = 1;
+ }
+out:
+ usbi_mutex_unlock(&itransfer->flags_lock);
+ if (remove) {
+ libusb_unref_device(transfer->dev_handle->dev);
+ remove_from_flying_list(itransfer);
+ }
+ usbi_mutex_unlock(&itransfer->lock);
+ return r;
+}
+
+/** \ingroup asyncio
+ * Asynchronously cancel a previously submitted transfer.
+ * This function returns immediately, but this does not indicate cancellation
+ * is complete. Your callback function will be invoked at some later time
+ * with a transfer status of
+ * \ref libusb_transfer_status::LIBUSB_TRANSFER_CANCELLED
+ * "LIBUSB_TRANSFER_CANCELLED."
+ *
+ * \param transfer the transfer to cancel
+ * \returns 0 on success
+ * \returns LIBUSB_ERROR_NOT_FOUND if the transfer is not in progress,
+ * already complete, or already cancelled.
+ * \returns a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_cancel_transfer(struct libusb_transfer *transfer)
+{
+ struct usbi_transfer *itransfer =
+ LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+ int r;
+
+ usbi_dbg("transfer %p", transfer );
+ usbi_mutex_lock(&itransfer->lock);
+ usbi_mutex_lock(&itransfer->flags_lock);
+ if (!(itransfer->flags & USBI_TRANSFER_IN_FLIGHT)
+ || (itransfer->flags & USBI_TRANSFER_CANCELLING)) {
+ r = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
+ r = usbi_backend->cancel_transfer(itransfer);
+ if (r < 0) {
+ if (r != LIBUSB_ERROR_NOT_FOUND &&
+ r != LIBUSB_ERROR_NO_DEVICE)
+ usbi_err(TRANSFER_CTX(transfer),
+ "cancel transfer failed error %d", r);
+ else
+ usbi_dbg("cancel transfer failed error %d", r);
+
+ if (r == LIBUSB_ERROR_NO_DEVICE)
+ itransfer->flags |= USBI_TRANSFER_DEVICE_DISAPPEARED;
+ }
+
+ itransfer->flags |= USBI_TRANSFER_CANCELLING;
+
+out:
+ usbi_mutex_unlock(&itransfer->flags_lock);
+ usbi_mutex_unlock(&itransfer->lock);
+ return r;
+}
+
+/** \ingroup asyncio
+ * Set a transfers bulk stream id. Note users are advised to use
+ * libusb_fill_bulk_stream_transfer() instead of calling this function
+ * directly.
+ *
+ * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
+ *
+ * \param transfer the transfer to set the stream id for
+ * \param stream_id the stream id to set
+ * \see libusb_alloc_streams()
+ */
+void API_EXPORTED libusb_transfer_set_stream_id(
+ struct libusb_transfer *transfer, uint32_t stream_id)
+{
+ struct usbi_transfer *itransfer =
+ LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+
+ itransfer->stream_id = stream_id;
+}
+
+/** \ingroup asyncio
+ * Get a transfers bulk stream id.
+ *
+ * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
+ *
+ * \param transfer the transfer to get the stream id for
+ * \returns the stream id for the transfer
+ */
+uint32_t API_EXPORTED libusb_transfer_get_stream_id(
+ struct libusb_transfer *transfer)
+{
+ struct usbi_transfer *itransfer =
+ LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+
+ return itransfer->stream_id;
+}
+
+/* Handle completion of a transfer (completion might be an error condition).
+ * This will invoke the user-supplied callback function, which may end up
+ * freeing the transfer. Therefore you cannot use the transfer structure
+ * after calling this function, and you should free all backend-specific
+ * data before calling it.
+ * Do not call this function with the usbi_transfer lock held. User-specified
+ * callback functions may attempt to directly resubmit the transfer, which
+ * will attempt to take the lock. */
+int usbi_handle_transfer_completion(struct usbi_transfer *itransfer,
+ enum libusb_transfer_status status)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_device_handle *handle = transfer->dev_handle;
+ uint8_t flags;
+ int r;
+
+ r = remove_from_flying_list(itransfer);
+ if (r < 0)
+ usbi_err(ITRANSFER_CTX(itransfer), "failed to set timer for next timeout, errno=%d", errno);
+
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags &= ~USBI_TRANSFER_IN_FLIGHT;
+ itransfer->flags |= USBI_TRANSFER_COMPLETED;
+ usbi_mutex_unlock(&itransfer->flags_lock);
+
+ if (status == LIBUSB_TRANSFER_COMPLETED
+ && transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) {
+ int rqlen = transfer->length;
+ if (transfer->type == LIBUSB_TRANSFER_TYPE_CONTROL)
+ rqlen -= LIBUSB_CONTROL_SETUP_SIZE;
+ if (rqlen != itransfer->transferred) {
+ usbi_dbg("interpreting short transfer as error");
+ status = LIBUSB_TRANSFER_ERROR;
+ }
+ }
+
+ flags = transfer->flags;
+ transfer->status = status;
+ transfer->actual_length = itransfer->transferred;
+ usbi_dbg("transfer %p has callback %p", transfer, transfer->callback);
+ if (transfer->callback)
+ transfer->callback(transfer);
+ /* transfer might have been freed by the above call, do not use from
+ * this point. */
+ if (flags & LIBUSB_TRANSFER_FREE_TRANSFER)
+ libusb_free_transfer(transfer);
+ libusb_unref_device(handle->dev);
+ return r;
+}
+
+/* Similar to usbi_handle_transfer_completion() but exclusively for transfers
+ * that were asynchronously cancelled. The same concerns w.r.t. freeing of
+ * transfers exist here.
+ * Do not call this function with the usbi_transfer lock held. User-specified
+ * callback functions may attempt to directly resubmit the transfer, which
+ * will attempt to take the lock. */
+int usbi_handle_transfer_cancellation(struct usbi_transfer *transfer)
+{
+ /* if the URB was cancelled due to timeout, report timeout to the user */
+ if (transfer->flags & USBI_TRANSFER_TIMED_OUT) {
+ usbi_dbg("detected timeout cancellation");
+ return usbi_handle_transfer_completion(transfer, LIBUSB_TRANSFER_TIMED_OUT);
+ }
+
+ /* otherwise its a normal async cancel */
+ return usbi_handle_transfer_completion(transfer, LIBUSB_TRANSFER_CANCELLED);
+}
+
+/* Add a completed transfer to the completed_transfers list of the
+ * context and signal the event. The backend's handle_transfer_completion()
+ * function will be called the next time an event handler runs. */
+void usbi_signal_transfer_completion(struct usbi_transfer *transfer)
+{
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int pending_events;
+
+ usbi_mutex_lock(&ctx->event_data_lock);
+ pending_events = usbi_pending_events(ctx);
+ list_add_tail(&transfer->completed_list, &ctx->completed_transfers);
+ if (!pending_events)
+ usbi_signal_event(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+}
+
+/** \ingroup poll
+ * Attempt to acquire the event handling lock. This lock is used to ensure that
+ * only one thread is monitoring libusb event sources at any one time.
+ *
+ * You only need to use this lock if you are developing an application
+ * which calls poll() or select() on libusb's file descriptors directly.
+ * If you stick to libusb's event handling loop functions (e.g.
+ * libusb_handle_events()) then you do not need to be concerned with this
+ * locking.
+ *
+ * While holding this lock, you are trusted to actually be handling events.
+ * If you are no longer handling events, you must call libusb_unlock_events()
+ * as soon as possible.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns 0 if the lock was obtained successfully
+ * \returns 1 if the lock was not obtained (i.e. another thread holds the lock)
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_try_lock_events(libusb_context *ctx)
+{
+ int r;
+ unsigned int ru;
+ USBI_GET_CONTEXT(ctx);
+
+ /* is someone else waiting to close a device? if so, don't let this thread
+ * start event handling */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ ru = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ if (ru) {
+ usbi_dbg("someone else is closing a device");
+ return 1;
+ }
+
+ r = usbi_mutex_trylock(&ctx->events_lock);
+ if (r)
+ return 1;
+
+ ctx->event_handler_active = 1;
+ return 0;
+}
+
+/** \ingroup poll
+ * Acquire the event handling lock, blocking until successful acquisition if
+ * it is contended. This lock is used to ensure that only one thread is
+ * monitoring libusb event sources at any one time.
+ *
+ * You only need to use this lock if you are developing an application
+ * which calls poll() or select() on libusb's file descriptors directly.
+ * If you stick to libusb's event handling loop functions (e.g.
+ * libusb_handle_events()) then you do not need to be concerned with this
+ * locking.
+ *
+ * While holding this lock, you are trusted to actually be handling events.
+ * If you are no longer handling events, you must call libusb_unlock_events()
+ * as soon as possible.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \ref mtasync
+ */
+void API_EXPORTED libusb_lock_events(libusb_context *ctx)
+{
+ USBI_GET_CONTEXT(ctx);
+ usbi_mutex_lock(&ctx->events_lock);
+ ctx->event_handler_active = 1;
+}
+
+/** \ingroup poll
+ * Release the lock previously acquired with libusb_try_lock_events() or
+ * libusb_lock_events(). Releasing this lock will wake up any threads blocked
+ * on libusb_wait_for_event().
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \ref mtasync
+ */
+void API_EXPORTED libusb_unlock_events(libusb_context *ctx)
+{
+ USBI_GET_CONTEXT(ctx);
+ ctx->event_handler_active = 0;
+ usbi_mutex_unlock(&ctx->events_lock);
+
+ /* FIXME: perhaps we should be a bit more efficient by not broadcasting
+ * the availability of the events lock when we are modifying pollfds
+ * (check ctx->device_close)? */
+ usbi_mutex_lock(&ctx->event_waiters_lock);
+ usbi_cond_broadcast(&ctx->event_waiters_cond);
+ usbi_mutex_unlock(&ctx->event_waiters_lock);
+}
+
+/** \ingroup poll
+ * Determine if it is still OK for this thread to be doing event handling.
+ *
+ * Sometimes, libusb needs to temporarily pause all event handlers, and this
+ * is the function you should use before polling file descriptors to see if
+ * this is the case.
+ *
+ * If this function instructs your thread to give up the events lock, you
+ * should just continue the usual logic that is documented in \ref mtasync.
+ * On the next iteration, your thread will fail to obtain the events lock,
+ * and will hence become an event waiter.
+ *
+ * This function should be called while the events lock is held: you don't
+ * need to worry about the results of this function if your thread is not
+ * the current event handler.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns 1 if event handling can start or continue
+ * \returns 0 if this thread must give up the events lock
+ * \ref fullstory "Multi-threaded I/O: the full story"
+ */
+int API_EXPORTED libusb_event_handling_ok(libusb_context *ctx)
+{
+ unsigned int r;
+ USBI_GET_CONTEXT(ctx);
+
+ /* is someone else waiting to close a device? if so, don't let this thread
+ * continue event handling */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ r = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ if (r) {
+ usbi_dbg("someone else is closing a device");
+ return 0;
+ }
+
+ return 1;
+}
+
+
+/** \ingroup poll
+ * Determine if an active thread is handling events (i.e. if anyone is holding
+ * the event handling lock).
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns 1 if a thread is handling events
+ * \returns 0 if there are no threads currently handling events
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_event_handler_active(libusb_context *ctx)
+{
+ unsigned int r;
+ USBI_GET_CONTEXT(ctx);
+
+ /* is someone else waiting to close a device? if so, don't let this thread
+ * start event handling -- indicate that event handling is happening */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ r = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ if (r) {
+ usbi_dbg("someone else is closing a device");
+ return 1;
+ }
+
+ return ctx->event_handler_active;
+}
+
+/** \ingroup poll
+ * Acquire the event waiters lock. This lock is designed to be obtained under
+ * the situation where you want to be aware when events are completed, but
+ * some other thread is event handling so calling libusb_handle_events() is not
+ * allowed.
+ *
+ * You then obtain this lock, re-check that another thread is still handling
+ * events, then call libusb_wait_for_event().
+ *
+ * You only need to use this lock if you are developing an application
+ * which calls poll() or select() on libusb's file descriptors directly,
+ * <b>and</b> may potentially be handling events from 2 threads simultaenously.
+ * If you stick to libusb's event handling loop functions (e.g.
+ * libusb_handle_events()) then you do not need to be concerned with this
+ * locking.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \ref mtasync
+ */
+void API_EXPORTED libusb_lock_event_waiters(libusb_context *ctx)
+{
+ USBI_GET_CONTEXT(ctx);
+ usbi_mutex_lock(&ctx->event_waiters_lock);
+}
+
+/** \ingroup poll
+ * Release the event waiters lock.
+ * \param ctx the context to operate on, or NULL for the default context
+ * \ref mtasync
+ */
+void API_EXPORTED libusb_unlock_event_waiters(libusb_context *ctx)
+{
+ USBI_GET_CONTEXT(ctx);
+ usbi_mutex_unlock(&ctx->event_waiters_lock);
+}
+
+/** \ingroup poll
+ * Wait for another thread to signal completion of an event. Must be called
+ * with the event waiters lock held, see libusb_lock_event_waiters().
+ *
+ * This function will block until any of the following conditions are met:
+ * -# The timeout expires
+ * -# A transfer completes
+ * -# A thread releases the event handling lock through libusb_unlock_events()
+ *
+ * Condition 1 is obvious. Condition 2 unblocks your thread <em>after</em>
+ * the callback for the transfer has completed. Condition 3 is important
+ * because it means that the thread that was previously handling events is no
+ * longer doing so, so if any events are to complete, another thread needs to
+ * step up and start event handling.
+ *
+ * This function releases the event waiters lock before putting your thread
+ * to sleep, and reacquires the lock as it is being woken up.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param tv maximum timeout for this blocking function. A NULL value
+ * indicates unlimited timeout.
+ * \returns 0 after a transfer completes or another thread stops event handling
+ * \returns 1 if the timeout expired
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_wait_for_event(libusb_context *ctx, struct timeval *tv)
+{
+ struct timespec timeout;
+ int r;
+
+ USBI_GET_CONTEXT(ctx);
+ if (tv == NULL) {
+ usbi_cond_wait(&ctx->event_waiters_cond, &ctx->event_waiters_lock);
+ return 0;
+ }
+
+ r = usbi_backend->clock_gettime(USBI_CLOCK_REALTIME, &timeout);
+ if (r < 0) {
+ usbi_err(ctx, "failed to read realtime clock, error %d", errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ timeout.tv_sec += tv->tv_sec;
+ timeout.tv_nsec += tv->tv_usec * 1000;
+ while (timeout.tv_nsec >= 1000000000) {
+ timeout.tv_nsec -= 1000000000;
+ timeout.tv_sec++;
+ }
+
+ r = usbi_cond_timedwait(&ctx->event_waiters_cond,
+ &ctx->event_waiters_lock, &timeout);
+ return (r == ETIMEDOUT);
+}
+
+static void handle_timeout(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ int r;
+
+ itransfer->flags |= USBI_TRANSFER_TIMEOUT_HANDLED;
+ r = libusb_cancel_transfer(transfer);
+ if (r == 0)
+ itransfer->flags |= USBI_TRANSFER_TIMED_OUT;
+ else
+ usbi_warn(TRANSFER_CTX(transfer),
+ "async cancel failed %d errno=%d", r, errno);
+}
+
+static int handle_timeouts_locked(struct libusb_context *ctx)
+{
+ int r;
+ struct timespec systime_ts;
+ struct timeval systime;
+ struct usbi_transfer *transfer;
+
+ if (list_empty(&ctx->flying_transfers))
+ return 0;
+
+ /* get current time */
+ r = usbi_backend->clock_gettime(USBI_CLOCK_MONOTONIC, &systime_ts);
+ if (r < 0)
+ return r;
+
+ TIMESPEC_TO_TIMEVAL(&systime, &systime_ts);
+
+ /* iterate through flying transfers list, finding all transfers that
+ * have expired timeouts */
+ list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
+ struct timeval *cur_tv = &transfer->timeout;
+
+ /* if we've reached transfers of infinite timeout, we're all done */
+ if (!timerisset(cur_tv))
+ return 0;
+
+ /* ignore timeouts we've already handled */
+ if (transfer->flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
+ continue;
+
+ /* if transfer has non-expired timeout, nothing more to do */
+ if ((cur_tv->tv_sec > systime.tv_sec) ||
+ (cur_tv->tv_sec == systime.tv_sec &&
+ cur_tv->tv_usec > systime.tv_usec))
+ return 0;
+
+ /* otherwise, we've got an expired timeout to handle */
+ handle_timeout(transfer);
+ }
+ return 0;
+}
+
+static int handle_timeouts(struct libusb_context *ctx)
+{
+ int r;
+ USBI_GET_CONTEXT(ctx);
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ r = handle_timeouts_locked(ctx);
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+ return r;
+}
+
+#ifdef USBI_TIMERFD_AVAILABLE
+static int handle_timerfd_trigger(struct libusb_context *ctx)
+{
+ int r;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+
+ /* process the timeout that just happened */
+ r = handle_timeouts_locked(ctx);
+ if (r < 0)
+ goto out;
+
+ /* arm for next timeout*/
+ r = arm_timerfd_for_next_timeout(ctx);
+
+out:
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+ return r;
+}
+#endif
+
+/* do the actual event handling. assumes that no other thread is concurrently
+ * doing the same thing. */
+static int handle_events(struct libusb_context *ctx, struct timeval *tv)
+{
+ int r;
+ struct usbi_pollfd *ipollfd;
+ POLL_NFDS_TYPE nfds = 0;
+ POLL_NFDS_TYPE internal_nfds;
+ struct pollfd *fds = NULL;
+ int i = -1;
+ int timeout_ms;
+ int special_event;
+
+ /* there are certain fds that libusb uses internally, currently:
+ *
+ * 1) event pipe
+ * 2) timerfd
+ *
+ * the backend will never need to attempt to handle events on these fds, so
+ * we determine how many fds are in use internally for this context and when
+ * handle_events() is called in the backend, the pollfd list and count will
+ * be adjusted to skip over these internal fds */
+ if (usbi_using_timerfd(ctx))
+ internal_nfds = 2;
+ else
+ internal_nfds = 1;
+
+ /* only reallocate the poll fds when the list of poll fds has been modified
+ * since the last poll, otherwise reuse them to save the additional overhead */
+ usbi_mutex_lock(&ctx->event_data_lock);
+ if (ctx->pollfds_modified) {
+ usbi_dbg("poll fds modified, reallocating");
+
+ if (ctx->pollfds) {
+ free(ctx->pollfds);
+ ctx->pollfds = NULL;
+ }
+
+ /* sanity check - it is invalid for a context to have fewer than the
+ * required internal fds (memory corruption?) */
+ assert(ctx->pollfds_cnt >= internal_nfds);
+
+ ctx->pollfds = calloc(ctx->pollfds_cnt, sizeof(*ctx->pollfds));
+ if (!ctx->pollfds) {
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd) {
+ struct libusb_pollfd *pollfd = &ipollfd->pollfd;
+ i++;
+ ctx->pollfds[i].fd = pollfd->fd;
+ ctx->pollfds[i].events = pollfd->events;
+ }
+
+ /* reset the flag now that we have the updated list */
+ ctx->pollfds_modified = 0;
+
+ /* if no further pending events, clear the event pipe so that we do
+ * not immediately return from poll */
+ if (!usbi_pending_events(ctx))
+ usbi_clear_event(ctx);
+ }
+ fds = ctx->pollfds;
+ nfds = ctx->pollfds_cnt;
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ timeout_ms = (int)(tv->tv_sec * 1000) + (tv->tv_usec / 1000);
+
+ /* round up to next millisecond */
+ if (tv->tv_usec % 1000)
+ timeout_ms++;
+
+redo_poll:
+ usbi_dbg("poll() %d fds with timeout in %dms", nfds, timeout_ms);
+ r = usbi_poll(fds, nfds, timeout_ms);
+ usbi_dbg("poll() returned %d", r);
+ if (r == 0)
+ return handle_timeouts(ctx);
+ else if (r == -1 && errno == EINTR)
+ return LIBUSB_ERROR_INTERRUPTED;
+ else if (r < 0) {
+ usbi_err(ctx, "poll failed %d err=%d", r, errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ special_event = 0;
+
+ /* fds[0] is always the event pipe */
+ if (fds[0].revents) {
+ libusb_hotplug_message *message = NULL;
+ struct usbi_transfer *itransfer;
+ int ret = 0;
+
+ usbi_dbg("caught a fish on the event pipe");
+
+ /* take the the event data lock while processing events */
+ usbi_mutex_lock(&ctx->event_data_lock);
+
+ /* check if someone added a new poll fd */
+ if (ctx->pollfds_modified)
+ usbi_dbg("someone updated the poll fds");
+
+ /* check if someone is closing a device */
+ if (ctx->device_close)
+ usbi_dbg("someone is closing a device");
+
+ /* check for any pending hotplug messages */
+ if (!list_empty(&ctx->hotplug_msgs)) {
+ usbi_dbg("hotplug message received");
+ special_event = 1;
+ message = list_first_entry(&ctx->hotplug_msgs, libusb_hotplug_message, list);
+ list_del(&message->list);
+ }
+
+ /* complete any pending transfers */
+ while (ret == 0 && !list_empty(&ctx->completed_transfers)) {
+ itransfer = list_first_entry(&ctx->completed_transfers, struct usbi_transfer, completed_list);
+ list_del(&itransfer->completed_list);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ ret = usbi_backend->handle_transfer_completion(itransfer);
+ if (ret)
+ usbi_err(ctx, "backend handle_transfer_completion failed with error %d", ret);
+ usbi_mutex_lock(&ctx->event_data_lock);
+ }
+
+ /* if no further pending events, clear the event pipe */
+ if (!usbi_pending_events(ctx))
+ usbi_clear_event(ctx);
+
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ /* process the hotplug message, if any */
+ if (message) {
+ usbi_hotplug_match(ctx, message->device, message->event);
+
+ /* the device left, dereference the device */
+ if (LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT == message->event)
+ libusb_unref_device(message->device);
+
+ free(message);
+ }
+
+ if (ret) {
+ /* return error code */
+ r = ret;
+ goto handled;
+ }
+
+ if (0 == --r)
+ goto handled;
+ }
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /* on timerfd configurations, fds[1] is the timerfd */
+ if (usbi_using_timerfd(ctx) && fds[1].revents) {
+ /* timerfd indicates that a timeout has expired */
+ int ret;
+ usbi_dbg("timerfd triggered");
+ special_event = 1;
+
+ ret = handle_timerfd_trigger(ctx);
+ if (ret < 0) {
+ /* return error code */
+ r = ret;
+ goto handled;
+ }
+
+ if (0 == --r)
+ goto handled;
+ }
+#endif
+
+ r = usbi_backend->handle_events(ctx, fds + internal_nfds, nfds - internal_nfds, r);
+ if (r)
+ usbi_err(ctx, "backend handle_events failed with error %d", r);
+
+handled:
+ if (r == 0 && special_event) {
+ timeout_ms = 0;
+ goto redo_poll;
+ }
+
+ return r;
+}
+
+/* returns the smallest of:
+ * 1. timeout of next URB
+ * 2. user-supplied timeout
+ * returns 1 if there is an already-expired timeout, otherwise returns 0
+ * and populates out
+ */
+static int get_next_timeout(libusb_context *ctx, struct timeval *tv,
+ struct timeval *out)
+{
+ struct timeval timeout;
+ int r = libusb_get_next_timeout(ctx, &timeout);
+ if (r) {
+ /* timeout already expired? */
+ if (!timerisset(&timeout))
+ return 1;
+
+ /* choose the smallest of next URB timeout or user specified timeout */
+ if (timercmp(&timeout, tv, <))
+ *out = timeout;
+ else
+ *out = *tv;
+ } else {
+ *out = *tv;
+ }
+ return 0;
+}
+
+/** \ingroup poll
+ * Handle any pending events.
+ *
+ * libusb determines "pending events" by checking if any timeouts have expired
+ * and by checking the set of file descriptors for activity.
+ *
+ * If a zero timeval is passed, this function will handle any already-pending
+ * events and then immediately return in non-blocking style.
+ *
+ * If a non-zero timeval is passed and no events are currently pending, this
+ * function will block waiting for events to handle up until the specified
+ * timeout. If an event arrives or a signal is raised, this function will
+ * return early.
+ *
+ * If the parameter completed is not NULL then <em>after obtaining the event
+ * handling lock</em> this function will return immediately if the integer
+ * pointed to is not 0. This allows for race free waiting for the completion
+ * of a specific transfer.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param tv the maximum time to block waiting for events, or an all zero
+ * timeval struct for non-blocking mode
+ * \param completed pointer to completion integer to check, or NULL
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_handle_events_timeout_completed(libusb_context *ctx,
+ struct timeval *tv, int *completed)
+{
+ int r;
+ struct timeval poll_timeout;
+
+ USBI_GET_CONTEXT(ctx);
+ r = get_next_timeout(ctx, tv, &poll_timeout);
+ if (r) {
+ /* timeout already expired */
+ return handle_timeouts(ctx);
+ }
+
+retry:
+ if (libusb_try_lock_events(ctx) == 0) {
+ if (completed == NULL || !*completed) {
+ /* we obtained the event lock: do our own event handling */
+ usbi_dbg("doing our own event handling");
+ r = handle_events(ctx, &poll_timeout);
+ }
+ libusb_unlock_events(ctx);
+ return r;
+ }
+
+ /* another thread is doing event handling. wait for thread events that
+ * notify event completion. */
+ libusb_lock_event_waiters(ctx);
+
+ if (completed && *completed)
+ goto already_done;
+
+ if (!libusb_event_handler_active(ctx)) {
+ /* we hit a race: whoever was event handling earlier finished in the
+ * time it took us to reach this point. try the cycle again. */
+ libusb_unlock_event_waiters(ctx);
+ usbi_dbg("event handler was active but went away, retrying");
+ goto retry;
+ }
+
+ usbi_dbg("another thread is doing event handling");
+ r = libusb_wait_for_event(ctx, &poll_timeout);
+
+already_done:
+ libusb_unlock_event_waiters(ctx);
+
+ if (r < 0)
+ return r;
+ else if (r == 1)
+ return handle_timeouts(ctx);
+ else
+ return 0;
+}
+
+/** \ingroup poll
+ * Handle any pending events
+ *
+ * Like libusb_handle_events_timeout_completed(), but without the completed
+ * parameter, calling this function is equivalent to calling
+ * libusb_handle_events_timeout_completed() with a NULL completed parameter.
+ *
+ * This function is kept primarily for backwards compatibility.
+ * All new code should call libusb_handle_events_completed() or
+ * libusb_handle_events_timeout_completed() to avoid race conditions.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param tv the maximum time to block waiting for events, or an all zero
+ * timeval struct for non-blocking mode
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_handle_events_timeout(libusb_context *ctx,
+ struct timeval *tv)
+{
+ return libusb_handle_events_timeout_completed(ctx, tv, NULL);
+}
+
+/** \ingroup poll
+ * Handle any pending events in blocking mode. There is currently a timeout
+ * hardcoded at 60 seconds but we plan to make it unlimited in future. For
+ * finer control over whether this function is blocking or non-blocking, or
+ * for control over the timeout, use libusb_handle_events_timeout_completed()
+ * instead.
+ *
+ * This function is kept primarily for backwards compatibility.
+ * All new code should call libusb_handle_events_completed() or
+ * libusb_handle_events_timeout_completed() to avoid race conditions.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ */
+int API_EXPORTED libusb_handle_events(libusb_context *ctx)
+{
+ struct timeval tv;
+ tv.tv_sec = 60;
+ tv.tv_usec = 0;
+ return libusb_handle_events_timeout_completed(ctx, &tv, NULL);
+}
+
+/** \ingroup poll
+ * Handle any pending events in blocking mode.
+ *
+ * Like libusb_handle_events(), with the addition of a completed parameter
+ * to allow for race free waiting for the completion of a specific transfer.
+ *
+ * See libusb_handle_events_timeout_completed() for details on the completed
+ * parameter.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param completed pointer to completion integer to check, or NULL
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_handle_events_completed(libusb_context *ctx,
+ int *completed)
+{
+ struct timeval tv;
+ tv.tv_sec = 60;
+ tv.tv_usec = 0;
+ return libusb_handle_events_timeout_completed(ctx, &tv, completed);
+}
+
+/** \ingroup poll
+ * Handle any pending events by polling file descriptors, without checking if
+ * any other threads are already doing so. Must be called with the event lock
+ * held, see libusb_lock_events().
+ *
+ * This function is designed to be called under the situation where you have
+ * taken the event lock and are calling poll()/select() directly on libusb's
+ * file descriptors (as opposed to using libusb_handle_events() or similar).
+ * You detect events on libusb's descriptors, so you then call this function
+ * with a zero timeout value (while still holding the event lock).
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param tv the maximum time to block waiting for events, or zero for
+ * non-blocking mode
+ * \returns 0 on success, or a LIBUSB_ERROR code on failure
+ * \ref mtasync
+ */
+int API_EXPORTED libusb_handle_events_locked(libusb_context *ctx,
+ struct timeval *tv)
+{
+ int r;
+ struct timeval poll_timeout;
+
+ USBI_GET_CONTEXT(ctx);
+ r = get_next_timeout(ctx, tv, &poll_timeout);
+ if (r) {
+ /* timeout already expired */
+ return handle_timeouts(ctx);
+ }
+
+ return handle_events(ctx, &poll_timeout);
+}
+
+/** \ingroup poll
+ * Determines whether your application must apply special timing considerations
+ * when monitoring libusb's file descriptors.
+ *
+ * This function is only useful for applications which retrieve and poll
+ * libusb's file descriptors in their own main loop (\ref pollmain).
+ *
+ * Ordinarily, libusb's event handler needs to be called into at specific
+ * moments in time (in addition to times when there is activity on the file
+ * descriptor set). The usual approach is to use libusb_get_next_timeout()
+ * to learn about when the next timeout occurs, and to adjust your
+ * poll()/select() timeout accordingly so that you can make a call into the
+ * library at that time.
+ *
+ * Some platforms supported by libusb do not come with this baggage - any
+ * events relevant to timing will be represented by activity on the file
+ * descriptor set, and libusb_get_next_timeout() will always return 0.
+ * This function allows you to detect whether you are running on such a
+ * platform.
+ *
+ * Since v1.0.5.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns 0 if you must call into libusb at times determined by
+ * libusb_get_next_timeout(), or 1 if all timeout events are handled internally
+ * or through regular activity on the file descriptors.
+ * \ref pollmain "Polling libusb file descriptors for event handling"
+ */
+int API_EXPORTED libusb_pollfds_handle_timeouts(libusb_context *ctx)
+{
+#if defined(USBI_TIMERFD_AVAILABLE)
+ USBI_GET_CONTEXT(ctx);
+ return usbi_using_timerfd(ctx);
+#else
+ (void)ctx;
+ return 0;
+#endif
+}
+
+/** \ingroup poll
+ * Determine the next internal timeout that libusb needs to handle. You only
+ * need to use this function if you are calling poll() or select() or similar
+ * on libusb's file descriptors yourself - you do not need to use it if you
+ * are calling libusb_handle_events() or a variant directly.
+ *
+ * You should call this function in your main loop in order to determine how
+ * long to wait for select() or poll() to return results. libusb needs to be
+ * called into at this timeout, so you should use it as an upper bound on
+ * your select() or poll() call.
+ *
+ * When the timeout has expired, call into libusb_handle_events_timeout()
+ * (perhaps in non-blocking mode) so that libusb can handle the timeout.
+ *
+ * This function may return 1 (success) and an all-zero timeval. If this is
+ * the case, it indicates that libusb has a timeout that has already expired
+ * so you should call libusb_handle_events_timeout() or similar immediately.
+ * A return code of 0 indicates that there are no pending timeouts.
+ *
+ * On some platforms, this function will always returns 0 (no pending
+ * timeouts). See \ref polltime.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param tv output location for a relative time against the current
+ * clock in which libusb must be called into in order to process timeout events
+ * \returns 0 if there are no pending timeouts, 1 if a timeout was returned,
+ * or LIBUSB_ERROR_OTHER on failure
+ */
+int API_EXPORTED libusb_get_next_timeout(libusb_context *ctx,
+ struct timeval *tv)
+{
+ struct usbi_transfer *transfer;
+ struct timespec cur_ts;
+ struct timeval cur_tv;
+ struct timeval next_timeout = { 0, 0 };
+ int r;
+
+ USBI_GET_CONTEXT(ctx);
+ if (usbi_using_timerfd(ctx))
+ return 0;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ if (list_empty(&ctx->flying_transfers)) {
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+ usbi_dbg("no URBs, no timeout!");
+ return 0;
+ }
+
+ /* find next transfer which hasn't already been processed as timed out */
+ list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
+ if (transfer->flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
+ continue;
+
+ /* if we've reached transfers of infinte timeout, we're done looking */
+ if (!timerisset(&transfer->timeout))
+ break;
+
+ next_timeout = transfer->timeout;
+ break;
+ }
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ if (!timerisset(&next_timeout)) {
+ usbi_dbg("no URB with timeout or all handled by OS; no timeout!");
+ return 0;
+ }
+
+ r = usbi_backend->clock_gettime(USBI_CLOCK_MONOTONIC, &cur_ts);
+ if (r < 0) {
+ usbi_err(ctx, "failed to read monotonic clock, errno=%d", errno);
+ return 0;
+ }
+ TIMESPEC_TO_TIMEVAL(&cur_tv, &cur_ts);
+
+ if (!timercmp(&cur_tv, &next_timeout, <)) {
+ usbi_dbg("first timeout already expired");
+ timerclear(tv);
+ } else {
+ timersub(&next_timeout, &cur_tv, tv);
+ usbi_dbg("next timeout in %d.%06ds", tv->tv_sec, tv->tv_usec);
+ }
+
+ return 1;
+}
+
+/** \ingroup poll
+ * Register notification functions for file descriptor additions/removals.
+ * These functions will be invoked for every new or removed file descriptor
+ * that libusb uses as an event source.
+ *
+ * To remove notifiers, pass NULL values for the function pointers.
+ *
+ * Note that file descriptors may have been added even before you register
+ * these notifiers (e.g. at libusb_init() time).
+ *
+ * Additionally, note that the removal notifier may be called during
+ * libusb_exit() (e.g. when it is closing file descriptors that were opened
+ * and added to the poll set at libusb_init() time). If you don't want this,
+ * remove the notifiers immediately before calling libusb_exit().
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \param added_cb pointer to function for addition notifications
+ * \param removed_cb pointer to function for removal notifications
+ * \param user_data User data to be passed back to callbacks (useful for
+ * passing context information)
+ */
+void API_EXPORTED libusb_set_pollfd_notifiers(libusb_context *ctx,
+ libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb,
+ void *user_data)
+{
+ USBI_GET_CONTEXT(ctx);
+ ctx->fd_added_cb = added_cb;
+ ctx->fd_removed_cb = removed_cb;
+ ctx->fd_cb_user_data = user_data;
+}
+
+/*
+ * Interrupt the iteration of the event handling thread, so that it picks
+ * up the fd change. Callers of this function must hold the event_data_lock.
+ */
+static void usbi_fd_notification(struct libusb_context *ctx)
+{
+ int pending_events;
+
+ /* Record that there is a new poll fd.
+ * Only signal an event if there are no prior pending events. */
+ pending_events = usbi_pending_events(ctx);
+ ctx->pollfds_modified = 1;
+ if (!pending_events)
+ usbi_signal_event(ctx);
+}
+
+/* Add a file descriptor to the list of file descriptors to be monitored.
+ * events should be specified as a bitmask of events passed to poll(), e.g.
+ * POLLIN and/or POLLOUT. */
+int usbi_add_pollfd(struct libusb_context *ctx, int fd, short events)
+{
+ struct usbi_pollfd *ipollfd = malloc(sizeof(*ipollfd));
+ if (!ipollfd)
+ return LIBUSB_ERROR_NO_MEM;
+
+ usbi_dbg("add fd %d events %d", fd, events);
+ ipollfd->pollfd.fd = fd;
+ ipollfd->pollfd.events = events;
+ usbi_mutex_lock(&ctx->event_data_lock);
+ list_add_tail(&ipollfd->list, &ctx->ipollfds);
+ ctx->pollfds_cnt++;
+ usbi_fd_notification(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ if (ctx->fd_added_cb)
+ ctx->fd_added_cb(fd, events, ctx->fd_cb_user_data);
+ return 0;
+}
+
+/* Remove a file descriptor from the list of file descriptors to be polled. */
+void usbi_remove_pollfd(struct libusb_context *ctx, int fd)
+{
+ struct usbi_pollfd *ipollfd;
+ int found = 0;
+
+ usbi_dbg("remove fd %d", fd);
+ usbi_mutex_lock(&ctx->event_data_lock);
+ list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd)
+ if (ipollfd->pollfd.fd == fd) {
+ found = 1;
+ break;
+ }
+
+ if (!found) {
+ usbi_dbg("couldn't find fd %d to remove", fd);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ return;
+ }
+
+ list_del(&ipollfd->list);
+ ctx->pollfds_cnt--;
+ usbi_fd_notification(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ free(ipollfd);
+ if (ctx->fd_removed_cb)
+ ctx->fd_removed_cb(fd, ctx->fd_cb_user_data);
+}
+
+/** \ingroup poll
+ * Retrieve a list of file descriptors that should be polled by your main loop
+ * as libusb event sources.
+ *
+ * The returned list is NULL-terminated and should be freed with libusb_free_pollfds()
+ * when done. The actual list contents must not be touched.
+ *
+ * As file descriptors are a Unix-specific concept, this function is not
+ * available on Windows and will always return NULL.
+ *
+ * \param ctx the context to operate on, or NULL for the default context
+ * \returns a NULL-terminated list of libusb_pollfd structures
+ * \returns NULL on error
+ * \returns NULL on platforms where the functionality is not available
+ */
+DEFAULT_VISIBILITY
+const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds(
+ libusb_context *ctx)
+{
+#ifndef OS_WINDOWS
+ struct libusb_pollfd **ret = NULL;
+ struct usbi_pollfd *ipollfd;
+ size_t i = 0;
+ USBI_GET_CONTEXT(ctx);
+
+ usbi_mutex_lock(&ctx->event_data_lock);
+
+ ret = calloc(ctx->pollfds_cnt + 1, sizeof(struct libusb_pollfd *));
+ if (!ret)
+ goto out;
+
+ list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd)
+ ret[i++] = (struct libusb_pollfd *) ipollfd;
+ ret[ctx->pollfds_cnt] = NULL;
+
+out:
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ return (const struct libusb_pollfd **) ret;
+#else
+ usbi_err(ctx, "external polling of libusb's internal descriptors "\
+ "is not yet supported on Windows platforms");
+ return NULL;
+#endif
+}
+
+/** \ingroup poll
+ * Free a list of libusb_pollfd structures. This should be called for all
+ * pollfd lists allocated with libusb_get_pollfds().
+ *
+ * Since version 1.0.20, \ref LIBUSB_API_VERSION >= 0x01000104
+ *
+ * It is legal to call this function with a NULL pollfd list. In this case,
+ * the function will simply return safely.
+ *
+ * \param pollfds the list of libusb_pollfd structures to free
+ */
+void API_EXPORTED libusb_free_pollfds(const struct libusb_pollfd **pollfds)
+{
+ if (!pollfds)
+ return;
+
+ free((void *)pollfds);
+}
+
+/* Backends may call this from handle_events to report disconnection of a
+ * device. This function ensures transfers get cancelled appropriately.
+ * Callers of this function must hold the events_lock.
+ */
+void usbi_handle_disconnect(struct libusb_device_handle *handle)
+{
+ struct usbi_transfer *cur;
+ struct usbi_transfer *to_cancel;
+
+ usbi_dbg("device %d.%d",
+ handle->dev->bus_number, handle->dev->device_address);
+
+ /* terminate all pending transfers with the LIBUSB_TRANSFER_NO_DEVICE
+ * status code.
+ *
+ * when we find a transfer for this device on the list, there are two
+ * possible scenarios:
+ * 1. the transfer is currently in-flight, in which case we terminate the
+ * transfer here
+ * 2. the transfer is not in-flight (or is but hasn't been marked as such),
+ * in which case we record that the device disappeared and this will be
+ * handled by libusb_submit_transfer()
+ */
+
+ while (1) {
+ to_cancel = NULL;
+ usbi_mutex_lock(&HANDLE_CTX(handle)->flying_transfers_lock);
+ list_for_each_entry(cur, &HANDLE_CTX(handle)->flying_transfers, list, struct usbi_transfer)
+ if (USBI_TRANSFER_TO_LIBUSB_TRANSFER(cur)->dev_handle == handle) {
+ usbi_mutex_lock(&cur->flags_lock);
+ if (cur->flags & USBI_TRANSFER_IN_FLIGHT)
+ to_cancel = cur;
+ else
+ cur->flags |= USBI_TRANSFER_DEVICE_DISAPPEARED;
+ usbi_mutex_unlock(&cur->flags_lock);
+
+ if (to_cancel)
+ break;
+ }
+ usbi_mutex_unlock(&HANDLE_CTX(handle)->flying_transfers_lock);
+
+ if (!to_cancel)
+ break;
+
+ usbi_dbg("cancelling transfer %p from disconnect",
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(to_cancel));
+
+ usbi_mutex_lock(&to_cancel->lock);
+ usbi_backend->clear_transfer_priv(to_cancel);
+ usbi_mutex_unlock(&to_cancel->lock);
+ usbi_handle_transfer_completion(to_cancel, LIBUSB_TRANSFER_NO_DEVICE);
+ }
+
+}
--- /dev/null
+LIBRARY "libusb-1.0.dll"
+EXPORTS
+ libusb_alloc_streams
+ libusb_alloc_streams@16 = libusb_alloc_streams
+ libusb_alloc_transfer
+ libusb_alloc_transfer@4 = libusb_alloc_transfer
+ libusb_attach_kernel_driver
+ libusb_attach_kernel_driver@8 = libusb_attach_kernel_driver
+ libusb_bulk_transfer
+ libusb_bulk_transfer@24 = libusb_bulk_transfer
+ libusb_cancel_transfer
+ libusb_cancel_transfer@4 = libusb_cancel_transfer
+ libusb_claim_interface
+ libusb_claim_interface@8 = libusb_claim_interface
+ libusb_clear_halt
+ libusb_clear_halt@8 = libusb_clear_halt
+ libusb_close
+ libusb_close@4 = libusb_close
+ libusb_control_transfer
+ libusb_control_transfer@32 = libusb_control_transfer
+ libusb_detach_kernel_driver
+ libusb_detach_kernel_driver@8 = libusb_detach_kernel_driver
+ libusb_error_name
+ libusb_error_name@4 = libusb_error_name
+ libusb_event_handler_active
+ libusb_event_handler_active@4 = libusb_event_handler_active
+ libusb_event_handling_ok
+ libusb_event_handling_ok@4 = libusb_event_handling_ok
+ libusb_exit
+ libusb_exit@4 = libusb_exit
+ libusb_free_bos_descriptor
+ libusb_free_bos_descriptor@4 = libusb_free_bos_descriptor
+ libusb_free_config_descriptor
+ libusb_free_config_descriptor@4 = libusb_free_config_descriptor
+ libusb_free_container_id_descriptor
+ libusb_free_container_id_descriptor@4 = libusb_free_container_id_descriptor
+ libusb_free_device_list
+ libusb_free_device_list@8 = libusb_free_device_list
+ libusb_free_ss_endpoint_companion_descriptor
+ libusb_free_ss_endpoint_companion_descriptor@4 = libusb_free_ss_endpoint_companion_descriptor
+ libusb_free_ss_usb_device_capability_descriptor
+ libusb_free_ss_usb_device_capability_descriptor@4 = libusb_free_ss_usb_device_capability_descriptor
+ libusb_free_streams
+ libusb_free_streams@12 = libusb_free_streams
+ libusb_free_transfer
+ libusb_free_transfer@4 = libusb_free_transfer
+ libusb_free_usb_2_0_extension_descriptor
+ libusb_free_usb_2_0_extension_descriptor@4 = libusb_free_usb_2_0_extension_descriptor
+ libusb_get_active_config_descriptor
+ libusb_get_active_config_descriptor@8 = libusb_get_active_config_descriptor
+ libusb_get_bos_descriptor
+ libusb_get_bos_descriptor@8 = libusb_get_bos_descriptor
+ libusb_get_bus_number
+ libusb_get_bus_number@4 = libusb_get_bus_number
+ libusb_get_config_descriptor
+ libusb_get_config_descriptor@12 = libusb_get_config_descriptor
+ libusb_get_config_descriptor_by_value
+ libusb_get_config_descriptor_by_value@12 = libusb_get_config_descriptor_by_value
+ libusb_get_configuration
+ libusb_get_configuration@8 = libusb_get_configuration
+ libusb_get_container_id_descriptor
+ libusb_get_container_id_descriptor@12 = libusb_get_container_id_descriptor
+ libusb_get_device
+ libusb_get_device@4 = libusb_get_device
+ libusb_get_device_address
+ libusb_get_device_address@4 = libusb_get_device_address
+ libusb_get_device_descriptor
+ libusb_get_device_descriptor@8 = libusb_get_device_descriptor
+ libusb_get_device_list
+ libusb_get_device_list@8 = libusb_get_device_list
+ libusb_get_device_speed
+ libusb_get_device_speed@4 = libusb_get_device_speed
+ libusb_get_max_iso_packet_size
+ libusb_get_max_iso_packet_size@8 = libusb_get_max_iso_packet_size
+ libusb_get_max_packet_size
+ libusb_get_max_packet_size@8 = libusb_get_max_packet_size
+ libusb_get_next_timeout
+ libusb_get_next_timeout@8 = libusb_get_next_timeout
+ libusb_get_parent
+ libusb_get_parent@4 = libusb_get_parent
+ libusb_get_pollfds
+ libusb_get_pollfds@4 = libusb_get_pollfds
+ libusb_free_pollfds
+ libusb_free_pollfds@4 = libusb_free_pollfds
+ libusb_get_port_number
+ libusb_get_port_number@4 = libusb_get_port_number
+ libusb_get_port_numbers
+ libusb_get_port_numbers@12 = libusb_get_port_numbers
+ libusb_get_port_path
+ libusb_get_port_path@16 = libusb_get_port_path
+ libusb_get_ss_endpoint_companion_descriptor
+ libusb_get_ss_endpoint_companion_descriptor@12 = libusb_get_ss_endpoint_companion_descriptor
+ libusb_get_ss_usb_device_capability_descriptor
+ libusb_get_ss_usb_device_capability_descriptor@12 = libusb_get_ss_usb_device_capability_descriptor
+ libusb_get_string_descriptor_ascii
+ libusb_get_string_descriptor_ascii@16 = libusb_get_string_descriptor_ascii
+ libusb_get_usb_2_0_extension_descriptor
+ libusb_get_usb_2_0_extension_descriptor@12 = libusb_get_usb_2_0_extension_descriptor
+ libusb_get_version
+ libusb_get_version@0 = libusb_get_version
+ libusb_handle_events
+ libusb_handle_events@4 = libusb_handle_events
+ libusb_handle_events_completed
+ libusb_handle_events_completed@8 = libusb_handle_events_completed
+ libusb_handle_events_locked
+ libusb_handle_events_locked@8 = libusb_handle_events_locked
+ libusb_handle_events_timeout
+ libusb_handle_events_timeout@8 = libusb_handle_events_timeout
+ libusb_handle_events_timeout_completed
+ libusb_handle_events_timeout_completed@12 = libusb_handle_events_timeout_completed
+ libusb_has_capability
+ libusb_has_capability@4 = libusb_has_capability
+ libusb_hotplug_deregister_callback
+ libusb_hotplug_deregister_callback@8 = libusb_hotplug_deregister_callback
+ libusb_hotplug_register_callback
+ libusb_hotplug_register_callback@36 = libusb_hotplug_register_callback
+ libusb_init
+ libusb_init@4 = libusb_init
+ libusb_interrupt_transfer
+ libusb_interrupt_transfer@24 = libusb_interrupt_transfer
+ libusb_kernel_driver_active
+ libusb_kernel_driver_active@8 = libusb_kernel_driver_active
+ libusb_lock_event_waiters
+ libusb_lock_event_waiters@4 = libusb_lock_event_waiters
+ libusb_lock_events
+ libusb_lock_events@4 = libusb_lock_events
+ libusb_open
+ libusb_open@8 = libusb_open
+ libusb_open_device_with_vid_pid
+ libusb_open_device_with_vid_pid@12 = libusb_open_device_with_vid_pid
+ libusb_pollfds_handle_timeouts
+ libusb_pollfds_handle_timeouts@4 = libusb_pollfds_handle_timeouts
+ libusb_ref_device
+ libusb_ref_device@4 = libusb_ref_device
+ libusb_release_interface
+ libusb_release_interface@8 = libusb_release_interface
+ libusb_reset_device
+ libusb_reset_device@4 = libusb_reset_device
+ libusb_set_auto_detach_kernel_driver
+ libusb_set_auto_detach_kernel_driver@8 = libusb_set_auto_detach_kernel_driver
+ libusb_set_configuration
+ libusb_set_configuration@8 = libusb_set_configuration
+ libusb_set_debug
+ libusb_set_debug@8 = libusb_set_debug
+ libusb_set_interface_alt_setting
+ libusb_set_interface_alt_setting@12 = libusb_set_interface_alt_setting
+ libusb_set_pollfd_notifiers
+ libusb_set_pollfd_notifiers@16 = libusb_set_pollfd_notifiers
+ libusb_setlocale
+ libusb_setlocale@4 = libusb_setlocale
+ libusb_strerror
+ libusb_strerror@4 = libusb_strerror
+ libusb_submit_transfer
+ libusb_submit_transfer@4 = libusb_submit_transfer
+ libusb_transfer_get_stream_id
+ libusb_transfer_get_stream_id@4 = libusb_transfer_get_stream_id
+ libusb_transfer_set_stream_id
+ libusb_transfer_set_stream_id@8 = libusb_transfer_set_stream_id
+ libusb_try_lock_events
+ libusb_try_lock_events@4 = libusb_try_lock_events
+ libusb_unlock_event_waiters
+ libusb_unlock_event_waiters@4 = libusb_unlock_event_waiters
+ libusb_unlock_events
+ libusb_unlock_events@4 = libusb_unlock_events
+ libusb_unref_device
+ libusb_unref_device@4 = libusb_unref_device
+ libusb_wait_for_event
+ libusb_wait_for_event@8 = libusb_wait_for_event
--- /dev/null
+/*
+ * For Windows: input this file to the Resoure Compiler to produce a binary
+ * .res file. This is then embedded in the resultant library (like any other
+ * compilation object).
+ * The information can then be queried using standard APIs and can also be
+ * viewed with utilities such as Windows Explorer.
+ */
+#ifndef _WIN32_WCE
+#include "winresrc.h"
+#endif
+
+#include "version.h"
+#ifndef LIBUSB_VERSIONSTRING
+#define LU_STR(s) #s
+#define LU_XSTR(s) LU_STR(s)
+#if LIBUSB_NANO > 0
+#define LIBUSB_VERSIONSTRING \
+ LU_XSTR(LIBUSB_MAJOR) "." LU_XSTR(LIBUSB_MINOR) "." \
+ LU_XSTR(LIBUSB_MICRO) "." LU_XSTR(LIBUSB_NANO) LIBUSB_RC "\0"
+#else
+#define LIBUSB_VERSIONSTRING \
+ LU_XSTR(LIBUSB_MAJOR) "." LU_XSTR(LIBUSB_MINOR) "." \
+ LU_XSTR(LIBUSB_MICRO) LIBUSB_RC "\0"
+#endif
+#endif
+
+VS_VERSION_INFO VERSIONINFO
+ FILEVERSION LIBUSB_MAJOR,LIBUSB_MINOR,LIBUSB_MICRO,LIBUSB_NANO
+ PRODUCTVERSION LIBUSB_MAJOR,LIBUSB_MINOR,LIBUSB_MICRO,LIBUSB_NANO
+ FILEFLAGSMASK 0x3fL
+#ifdef _DEBUG
+ FILEFLAGS 0x1L
+#else
+ FILEFLAGS 0x0L
+#endif
+ FILEOS 0x40004L
+ FILETYPE 0x2L
+ FILESUBTYPE 0x0L
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904b0"
+ BEGIN
+ VALUE "CompanyName", "libusb.info\0"
+ VALUE "FileDescription", "C library for writing portable USB drivers in userspace\0"
+ VALUE "FileVersion", LIBUSB_VERSIONSTRING
+ VALUE "InternalName", "libusb\0"
+ VALUE "LegalCopyright", "See individual source files, GNU LGPL v2.1 or later.\0"
+ VALUE "LegalTrademarks", "http://www.gnu.org/licenses/lgpl-2.1.html\0"
+ VALUE "OriginalFilename", "libusb-1.0.dll\0"
+ VALUE "PrivateBuild", "\0"
+ VALUE "ProductName", "libusb-1.0\0"
+ VALUE "ProductVersion", LIBUSB_VERSIONSTRING
+ VALUE "SpecialBuild", "\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x409, 1200
+ END
+END
--- /dev/null
+/*
+ * Public libusb header file
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2012 Pete Batard <pete@akeo.ie>
+ * Copyright © 2012 Nathan Hjelm <hjelmn@cs.unm.edu>
+ * For more information, please visit: http://libusb.info
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSB_H
+#define LIBUSB_H
+
+#ifdef _MSC_VER
+/* on MS environments, the inline keyword is available in C++ only */
+#if !defined(__cplusplus)
+#define inline __inline
+#endif
+/* ssize_t is also not available (copy/paste from MinGW) */
+#ifndef _SSIZE_T_DEFINED
+#define _SSIZE_T_DEFINED
+#undef ssize_t
+#ifdef _WIN64
+ typedef __int64 ssize_t;
+#else
+ typedef int ssize_t;
+#endif /* _WIN64 */
+#endif /* _SSIZE_T_DEFINED */
+#endif /* _MSC_VER */
+
+/* stdint.h is not available on older MSVC */
+#if defined(_MSC_VER) && (_MSC_VER < 1600) && (!defined(_STDINT)) && (!defined(_STDINT_H))
+typedef unsigned __int8 uint8_t;
+typedef unsigned __int16 uint16_t;
+typedef unsigned __int32 uint32_t;
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(_WIN32_WCE)
+#include <sys/types.h>
+#endif
+
+#if defined(__linux) || defined(__APPLE__) || defined(__CYGWIN__) || defined(__HAIKU__)
+#include <sys/time.h>
+#endif
+
+#include <time.h>
+#include <limits.h>
+
+/* 'interface' might be defined as a macro on Windows, so we need to
+ * undefine it so as not to break the current libusb API, because
+ * libusb_config_descriptor has an 'interface' member
+ * As this can be problematic if you include windows.h after libusb.h
+ * in your sources, we force windows.h to be included first. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+#include <windows.h>
+#if defined(interface)
+#undef interface
+#endif
+#if !defined(__CYGWIN__)
+#include <winsock.h>
+#endif
+#endif
+
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+#define LIBUSB_DEPRECATED_FOR(f) \
+ __attribute__((deprecated("Use " #f " instead")))
+#else
+#define LIBUSB_DEPRECATED_FOR(f)
+#endif /* __GNUC__ */
+
+/** \def LIBUSB_CALL
+ * \ingroup misc
+ * libusb's Windows calling convention.
+ *
+ * Under Windows, the selection of available compilers and configurations
+ * means that, unlike other platforms, there is not <em>one true calling
+ * convention</em> (calling convention: the manner in which parameters are
+ * passed to functions in the generated assembly code).
+ *
+ * Matching the Windows API itself, libusb uses the WINAPI convention (which
+ * translates to the <tt>stdcall</tt> convention) and guarantees that the
+ * library is compiled in this way. The public header file also includes
+ * appropriate annotations so that your own software will use the right
+ * convention, even if another convention is being used by default within
+ * your codebase.
+ *
+ * The one consideration that you must apply in your software is to mark
+ * all functions which you use as libusb callbacks with this LIBUSB_CALL
+ * annotation, so that they too get compiled for the correct calling
+ * convention.
+ *
+ * On non-Windows operating systems, this macro is defined as nothing. This
+ * means that you can apply it to your code without worrying about
+ * cross-platform compatibility.
+ */
+/* LIBUSB_CALL must be defined on both definition and declaration of libusb
+ * functions. You'd think that declaration would be enough, but cygwin will
+ * complain about conflicting types unless both are marked this way.
+ * The placement of this macro is important too; it must appear after the
+ * return type, before the function name. See internal documentation for
+ * API_EXPORTED.
+ */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+#define LIBUSB_CALL WINAPI
+#else
+#define LIBUSB_CALL
+#endif
+
+/** \def LIBUSB_API_VERSION
+ * \ingroup misc
+ * libusb's API version.
+ *
+ * Since version 1.0.13, to help with feature detection, libusb defines
+ * a LIBUSB_API_VERSION macro that gets increased every time there is a
+ * significant change to the API, such as the introduction of a new call,
+ * the definition of a new macro/enum member, or any other element that
+ * libusb applications may want to detect at compilation time.
+ *
+ * The macro is typically used in an application as follows:
+ * \code
+ * #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01001234)
+ * // Use one of the newer features from the libusb API
+ * #endif
+ * \endcode
+ *
+ * Internally, LIBUSB_API_VERSION is defined as follows:
+ * (libusb major << 24) | (libusb minor << 16) | (16 bit incremental)
+ */
+#define LIBUSB_API_VERSION 0x01000104
+
+/* The following is kept for compatibility, but will be deprecated in the future */
+#define LIBUSBX_API_VERSION LIBUSB_API_VERSION
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup misc
+ * Convert a 16-bit value from host-endian to little-endian format. On
+ * little endian systems, this function does nothing. On big endian systems,
+ * the bytes are swapped.
+ * \param x the host-endian value to convert
+ * \returns the value in little-endian byte order
+ */
+static inline uint16_t libusb_cpu_to_le16(const uint16_t x)
+{
+ union {
+ uint8_t b8[2];
+ uint16_t b16;
+ } _tmp;
+ _tmp.b8[1] = (uint8_t) (x >> 8);
+ _tmp.b8[0] = (uint8_t) (x & 0xff);
+ return _tmp.b16;
+}
+
+/** \def libusb_le16_to_cpu
+ * \ingroup misc
+ * Convert a 16-bit value from little-endian to host-endian format. On
+ * little endian systems, this function does nothing. On big endian systems,
+ * the bytes are swapped.
+ * \param x the little-endian value to convert
+ * \returns the value in host-endian byte order
+ */
+#define libusb_le16_to_cpu libusb_cpu_to_le16
+
+/* standard USB stuff */
+
+/** \ingroup desc
+ * Device and/or Interface Class codes */
+enum libusb_class_code {
+ /** In the context of a \ref libusb_device_descriptor "device descriptor",
+ * this bDeviceClass value indicates that each interface specifies its
+ * own class information and all interfaces operate independently.
+ */
+ LIBUSB_CLASS_PER_INTERFACE = 0,
+
+ /** Audio class */
+ LIBUSB_CLASS_AUDIO = 1,
+
+ /** Communications class */
+ LIBUSB_CLASS_COMM = 2,
+
+ /** Human Interface Device class */
+ LIBUSB_CLASS_HID = 3,
+
+ /** Physical */
+ LIBUSB_CLASS_PHYSICAL = 5,
+
+ /** Printer class */
+ LIBUSB_CLASS_PRINTER = 7,
+
+ /** Image class */
+ LIBUSB_CLASS_PTP = 6, /* legacy name from libusb-0.1 usb.h */
+ LIBUSB_CLASS_IMAGE = 6,
+
+ /** Mass storage class */
+ LIBUSB_CLASS_MASS_STORAGE = 8,
+
+ /** Hub class */
+ LIBUSB_CLASS_HUB = 9,
+
+ /** Data class */
+ LIBUSB_CLASS_DATA = 10,
+
+ /** Smart Card */
+ LIBUSB_CLASS_SMART_CARD = 0x0b,
+
+ /** Content Security */
+ LIBUSB_CLASS_CONTENT_SECURITY = 0x0d,
+
+ /** Video */
+ LIBUSB_CLASS_VIDEO = 0x0e,
+
+ /** Personal Healthcare */
+ LIBUSB_CLASS_PERSONAL_HEALTHCARE = 0x0f,
+
+ /** Diagnostic Device */
+ LIBUSB_CLASS_DIAGNOSTIC_DEVICE = 0xdc,
+
+ /** Wireless class */
+ LIBUSB_CLASS_WIRELESS = 0xe0,
+
+ /** Application class */
+ LIBUSB_CLASS_APPLICATION = 0xfe,
+
+ /** Class is vendor-specific */
+ LIBUSB_CLASS_VENDOR_SPEC = 0xff
+};
+
+/** \ingroup desc
+ * Descriptor types as defined by the USB specification. */
+enum libusb_descriptor_type {
+ /** Device descriptor. See libusb_device_descriptor. */
+ LIBUSB_DT_DEVICE = 0x01,
+
+ /** Configuration descriptor. See libusb_config_descriptor. */
+ LIBUSB_DT_CONFIG = 0x02,
+
+ /** String descriptor */
+ LIBUSB_DT_STRING = 0x03,
+
+ /** Interface descriptor. See libusb_interface_descriptor. */
+ LIBUSB_DT_INTERFACE = 0x04,
+
+ /** Endpoint descriptor. See libusb_endpoint_descriptor. */
+ LIBUSB_DT_ENDPOINT = 0x05,
+
+ /** BOS descriptor */
+ LIBUSB_DT_BOS = 0x0f,
+
+ /** Device Capability descriptor */
+ LIBUSB_DT_DEVICE_CAPABILITY = 0x10,
+
+ /** HID descriptor */
+ LIBUSB_DT_HID = 0x21,
+
+ /** HID report descriptor */
+ LIBUSB_DT_REPORT = 0x22,
+
+ /** Physical descriptor */
+ LIBUSB_DT_PHYSICAL = 0x23,
+
+ /** Hub descriptor */
+ LIBUSB_DT_HUB = 0x29,
+
+ /** SuperSpeed Hub descriptor */
+ LIBUSB_DT_SUPERSPEED_HUB = 0x2a,
+
+ /** SuperSpeed Endpoint Companion descriptor */
+ LIBUSB_DT_SS_ENDPOINT_COMPANION = 0x30
+};
+
+/* Descriptor sizes per descriptor type */
+#define LIBUSB_DT_DEVICE_SIZE 18
+#define LIBUSB_DT_CONFIG_SIZE 9
+#define LIBUSB_DT_INTERFACE_SIZE 9
+#define LIBUSB_DT_ENDPOINT_SIZE 7
+#define LIBUSB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
+#define LIBUSB_DT_HUB_NONVAR_SIZE 7
+#define LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE 6
+#define LIBUSB_DT_BOS_SIZE 5
+#define LIBUSB_DT_DEVICE_CAPABILITY_SIZE 3
+
+/* BOS descriptor sizes */
+#define LIBUSB_BT_USB_2_0_EXTENSION_SIZE 7
+#define LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE 10
+#define LIBUSB_BT_CONTAINER_ID_SIZE 20
+
+/* We unwrap the BOS => define its max size */
+#define LIBUSB_DT_BOS_MAX_SIZE ((LIBUSB_DT_BOS_SIZE) +\
+ (LIBUSB_BT_USB_2_0_EXTENSION_SIZE) +\
+ (LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE) +\
+ (LIBUSB_BT_CONTAINER_ID_SIZE))
+
+#define LIBUSB_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */
+#define LIBUSB_ENDPOINT_DIR_MASK 0x80
+
+/** \ingroup desc
+ * Endpoint direction. Values for bit 7 of the
+ * \ref libusb_endpoint_descriptor::bEndpointAddress "endpoint address" scheme.
+ */
+enum libusb_endpoint_direction {
+ /** In: device-to-host */
+ LIBUSB_ENDPOINT_IN = 0x80,
+
+ /** Out: host-to-device */
+ LIBUSB_ENDPOINT_OUT = 0x00
+};
+
+#define LIBUSB_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */
+
+/** \ingroup desc
+ * Endpoint transfer type. Values for bits 0:1 of the
+ * \ref libusb_endpoint_descriptor::bmAttributes "endpoint attributes" field.
+ */
+enum libusb_transfer_type {
+ /** Control endpoint */
+ LIBUSB_TRANSFER_TYPE_CONTROL = 0,
+
+ /** Isochronous endpoint */
+ LIBUSB_TRANSFER_TYPE_ISOCHRONOUS = 1,
+
+ /** Bulk endpoint */
+ LIBUSB_TRANSFER_TYPE_BULK = 2,
+
+ /** Interrupt endpoint */
+ LIBUSB_TRANSFER_TYPE_INTERRUPT = 3,
+
+ /** Stream endpoint */
+ LIBUSB_TRANSFER_TYPE_BULK_STREAM = 4,
+};
+
+/** \ingroup misc
+ * Standard requests, as defined in table 9-5 of the USB 3.0 specifications */
+enum libusb_standard_request {
+ /** Request status of the specific recipient */
+ LIBUSB_REQUEST_GET_STATUS = 0x00,
+
+ /** Clear or disable a specific feature */
+ LIBUSB_REQUEST_CLEAR_FEATURE = 0x01,
+
+ /* 0x02 is reserved */
+
+ /** Set or enable a specific feature */
+ LIBUSB_REQUEST_SET_FEATURE = 0x03,
+
+ /* 0x04 is reserved */
+
+ /** Set device address for all future accesses */
+ LIBUSB_REQUEST_SET_ADDRESS = 0x05,
+
+ /** Get the specified descriptor */
+ LIBUSB_REQUEST_GET_DESCRIPTOR = 0x06,
+
+ /** Used to update existing descriptors or add new descriptors */
+ LIBUSB_REQUEST_SET_DESCRIPTOR = 0x07,
+
+ /** Get the current device configuration value */
+ LIBUSB_REQUEST_GET_CONFIGURATION = 0x08,
+
+ /** Set device configuration */
+ LIBUSB_REQUEST_SET_CONFIGURATION = 0x09,
+
+ /** Return the selected alternate setting for the specified interface */
+ LIBUSB_REQUEST_GET_INTERFACE = 0x0A,
+
+ /** Select an alternate interface for the specified interface */
+ LIBUSB_REQUEST_SET_INTERFACE = 0x0B,
+
+ /** Set then report an endpoint's synchronization frame */
+ LIBUSB_REQUEST_SYNCH_FRAME = 0x0C,
+
+ /** Sets both the U1 and U2 Exit Latency */
+ LIBUSB_REQUEST_SET_SEL = 0x30,
+
+ /** Delay from the time a host transmits a packet to the time it is
+ * received by the device. */
+ LIBUSB_SET_ISOCH_DELAY = 0x31,
+};
+
+/** \ingroup misc
+ * Request type bits of the
+ * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
+ * transfers. */
+enum libusb_request_type {
+ /** Standard */
+ LIBUSB_REQUEST_TYPE_STANDARD = (0x00 << 5),
+
+ /** Class */
+ LIBUSB_REQUEST_TYPE_CLASS = (0x01 << 5),
+
+ /** Vendor */
+ LIBUSB_REQUEST_TYPE_VENDOR = (0x02 << 5),
+
+ /** Reserved */
+ LIBUSB_REQUEST_TYPE_RESERVED = (0x03 << 5)
+};
+
+/** \ingroup misc
+ * Recipient bits of the
+ * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
+ * transfers. Values 4 through 31 are reserved. */
+enum libusb_request_recipient {
+ /** Device */
+ LIBUSB_RECIPIENT_DEVICE = 0x00,
+
+ /** Interface */
+ LIBUSB_RECIPIENT_INTERFACE = 0x01,
+
+ /** Endpoint */
+ LIBUSB_RECIPIENT_ENDPOINT = 0x02,
+
+ /** Other */
+ LIBUSB_RECIPIENT_OTHER = 0x03,
+};
+
+#define LIBUSB_ISO_SYNC_TYPE_MASK 0x0C
+
+/** \ingroup desc
+ * Synchronization type for isochronous endpoints. Values for bits 2:3 of the
+ * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
+ * libusb_endpoint_descriptor.
+ */
+enum libusb_iso_sync_type {
+ /** No synchronization */
+ LIBUSB_ISO_SYNC_TYPE_NONE = 0,
+
+ /** Asynchronous */
+ LIBUSB_ISO_SYNC_TYPE_ASYNC = 1,
+
+ /** Adaptive */
+ LIBUSB_ISO_SYNC_TYPE_ADAPTIVE = 2,
+
+ /** Synchronous */
+ LIBUSB_ISO_SYNC_TYPE_SYNC = 3
+};
+
+#define LIBUSB_ISO_USAGE_TYPE_MASK 0x30
+
+/** \ingroup desc
+ * Usage type for isochronous endpoints. Values for bits 4:5 of the
+ * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
+ * libusb_endpoint_descriptor.
+ */
+enum libusb_iso_usage_type {
+ /** Data endpoint */
+ LIBUSB_ISO_USAGE_TYPE_DATA = 0,
+
+ /** Feedback endpoint */
+ LIBUSB_ISO_USAGE_TYPE_FEEDBACK = 1,
+
+ /** Implicit feedback Data endpoint */
+ LIBUSB_ISO_USAGE_TYPE_IMPLICIT = 2,
+};
+
+/** \ingroup desc
+ * A structure representing the standard USB device descriptor. This
+ * descriptor is documented in section 9.6.1 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_device_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE LIBUSB_DT_DEVICE in this
+ * context. */
+ uint8_t bDescriptorType;
+
+ /** USB specification release number in binary-coded decimal. A value of
+ * 0x0200 indicates USB 2.0, 0x0110 indicates USB 1.1, etc. */
+ uint16_t bcdUSB;
+
+ /** USB-IF class code for the device. See \ref libusb_class_code. */
+ uint8_t bDeviceClass;
+
+ /** USB-IF subclass code for the device, qualified by the bDeviceClass
+ * value */
+ uint8_t bDeviceSubClass;
+
+ /** USB-IF protocol code for the device, qualified by the bDeviceClass and
+ * bDeviceSubClass values */
+ uint8_t bDeviceProtocol;
+
+ /** Maximum packet size for endpoint 0 */
+ uint8_t bMaxPacketSize0;
+
+ /** USB-IF vendor ID */
+ uint16_t idVendor;
+
+ /** USB-IF product ID */
+ uint16_t idProduct;
+
+ /** Device release number in binary-coded decimal */
+ uint16_t bcdDevice;
+
+ /** Index of string descriptor describing manufacturer */
+ uint8_t iManufacturer;
+
+ /** Index of string descriptor describing product */
+ uint8_t iProduct;
+
+ /** Index of string descriptor containing device serial number */
+ uint8_t iSerialNumber;
+
+ /** Number of possible configurations */
+ uint8_t bNumConfigurations;
+};
+
+/** \ingroup desc
+ * A structure representing the standard USB endpoint descriptor. This
+ * descriptor is documented in section 9.6.6 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_endpoint_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_ENDPOINT LIBUSB_DT_ENDPOINT in
+ * this context. */
+ uint8_t bDescriptorType;
+
+ /** The address of the endpoint described by this descriptor. Bits 0:3 are
+ * the endpoint number. Bits 4:6 are reserved. Bit 7 indicates direction,
+ * see \ref libusb_endpoint_direction.
+ */
+ uint8_t bEndpointAddress;
+
+ /** Attributes which apply to the endpoint when it is configured using
+ * the bConfigurationValue. Bits 0:1 determine the transfer type and
+ * correspond to \ref libusb_transfer_type. Bits 2:3 are only used for
+ * isochronous endpoints and correspond to \ref libusb_iso_sync_type.
+ * Bits 4:5 are also only used for isochronous endpoints and correspond to
+ * \ref libusb_iso_usage_type. Bits 6:7 are reserved.
+ */
+ uint8_t bmAttributes;
+
+ /** Maximum packet size this endpoint is capable of sending/receiving. */
+ uint16_t wMaxPacketSize;
+
+ /** Interval for polling endpoint for data transfers. */
+ uint8_t bInterval;
+
+ /** For audio devices only: the rate at which synchronization feedback
+ * is provided. */
+ uint8_t bRefresh;
+
+ /** For audio devices only: the address if the synch endpoint */
+ uint8_t bSynchAddress;
+
+ /** Extra descriptors. If libusb encounters unknown endpoint descriptors,
+ * it will store them here, should you wish to parse them. */
+ const unsigned char *extra;
+
+ /** Length of the extra descriptors, in bytes. */
+ int extra_length;
+};
+
+/** \ingroup desc
+ * A structure representing the standard USB interface descriptor. This
+ * descriptor is documented in section 9.6.5 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_interface_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_INTERFACE LIBUSB_DT_INTERFACE
+ * in this context. */
+ uint8_t bDescriptorType;
+
+ /** Number of this interface */
+ uint8_t bInterfaceNumber;
+
+ /** Value used to select this alternate setting for this interface */
+ uint8_t bAlternateSetting;
+
+ /** Number of endpoints used by this interface (excluding the control
+ * endpoint). */
+ uint8_t bNumEndpoints;
+
+ /** USB-IF class code for this interface. See \ref libusb_class_code. */
+ uint8_t bInterfaceClass;
+
+ /** USB-IF subclass code for this interface, qualified by the
+ * bInterfaceClass value */
+ uint8_t bInterfaceSubClass;
+
+ /** USB-IF protocol code for this interface, qualified by the
+ * bInterfaceClass and bInterfaceSubClass values */
+ uint8_t bInterfaceProtocol;
+
+ /** Index of string descriptor describing this interface */
+ uint8_t iInterface;
+
+ /** Array of endpoint descriptors. This length of this array is determined
+ * by the bNumEndpoints field. */
+ const struct libusb_endpoint_descriptor *endpoint;
+
+ /** Extra descriptors. If libusb encounters unknown interface descriptors,
+ * it will store them here, should you wish to parse them. */
+ const unsigned char *extra;
+
+ /** Length of the extra descriptors, in bytes. */
+ int extra_length;
+};
+
+/** \ingroup desc
+ * A collection of alternate settings for a particular USB interface.
+ */
+struct libusb_interface {
+ /** Array of interface descriptors. The length of this array is determined
+ * by the num_altsetting field. */
+ const struct libusb_interface_descriptor *altsetting;
+
+ /** The number of alternate settings that belong to this interface */
+ int num_altsetting;
+};
+
+/** \ingroup desc
+ * A structure representing the standard USB configuration descriptor. This
+ * descriptor is documented in section 9.6.3 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_config_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_CONFIG LIBUSB_DT_CONFIG
+ * in this context. */
+ uint8_t bDescriptorType;
+
+ /** Total length of data returned for this configuration */
+ uint16_t wTotalLength;
+
+ /** Number of interfaces supported by this configuration */
+ uint8_t bNumInterfaces;
+
+ /** Identifier value for this configuration */
+ uint8_t bConfigurationValue;
+
+ /** Index of string descriptor describing this configuration */
+ uint8_t iConfiguration;
+
+ /** Configuration characteristics */
+ uint8_t bmAttributes;
+
+ /** Maximum power consumption of the USB device from this bus in this
+ * configuration when the device is fully operation. Expressed in units
+ * of 2 mA when the device is operating in high-speed mode and in units
+ * of 8 mA when the device is operating in super-speed mode. */
+ uint8_t MaxPower;
+
+ /** Array of interfaces supported by this configuration. The length of
+ * this array is determined by the bNumInterfaces field. */
+ const struct libusb_interface *interface;
+
+ /** Extra descriptors. If libusb encounters unknown configuration
+ * descriptors, it will store them here, should you wish to parse them. */
+ const unsigned char *extra;
+
+ /** Length of the extra descriptors, in bytes. */
+ int extra_length;
+};
+
+/** \ingroup desc
+ * A structure representing the superspeed endpoint companion
+ * descriptor. This descriptor is documented in section 9.6.7 of
+ * the USB 3.0 specification. All multiple-byte fields are represented in
+ * host-endian format.
+ */
+struct libusb_ss_endpoint_companion_descriptor {
+
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_SS_ENDPOINT_COMPANION in
+ * this context. */
+ uint8_t bDescriptorType;
+
+
+ /** The maximum number of packets the endpoint can send or
+ * recieve as part of a burst. */
+ uint8_t bMaxBurst;
+
+ /** In bulk EP: bits 4:0 represents the maximum number of
+ * streams the EP supports. In isochronous EP: bits 1:0
+ * represents the Mult - a zero based value that determines
+ * the maximum number of packets within a service interval */
+ uint8_t bmAttributes;
+
+ /** The total number of bytes this EP will transfer every
+ * service interval. valid only for periodic EPs. */
+ uint16_t wBytesPerInterval;
+};
+
+/** \ingroup desc
+ * A generic representation of a BOS Device Capability descriptor. It is
+ * advised to check bDevCapabilityType and call the matching
+ * libusb_get_*_descriptor function to get a structure fully matching the type.
+ */
+struct libusb_bos_dev_capability_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
+ * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
+ uint8_t bDescriptorType;
+ /** Device Capability type */
+ uint8_t bDevCapabilityType;
+ /** Device Capability data (bLength - 3 bytes) */
+ uint8_t dev_capability_data
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+/** \ingroup desc
+ * A structure representing the Binary Device Object Store (BOS) descriptor.
+ * This descriptor is documented in section 9.6.2 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_bos_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_BOS LIBUSB_DT_BOS
+ * in this context. */
+ uint8_t bDescriptorType;
+
+ /** Length of this descriptor and all of its sub descriptors */
+ uint16_t wTotalLength;
+
+ /** The number of separate device capability descriptors in
+ * the BOS */
+ uint8_t bNumDeviceCaps;
+
+ /** bNumDeviceCap Device Capability Descriptors */
+ struct libusb_bos_dev_capability_descriptor *dev_capability
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+/** \ingroup desc
+ * A structure representing the USB 2.0 Extension descriptor
+ * This descriptor is documented in section 9.6.2.1 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_usb_2_0_extension_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
+ * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
+ uint8_t bDescriptorType;
+
+ /** Capability type. Will have value
+ * \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION
+ * LIBUSB_BT_USB_2_0_EXTENSION in this context. */
+ uint8_t bDevCapabilityType;
+
+ /** Bitmap encoding of supported device level features.
+ * A value of one in a bit location indicates a feature is
+ * supported; a value of zero indicates it is not supported.
+ * See \ref libusb_usb_2_0_extension_attributes. */
+ uint32_t bmAttributes;
+};
+
+/** \ingroup desc
+ * A structure representing the SuperSpeed USB Device Capability descriptor
+ * This descriptor is documented in section 9.6.2.2 of the USB 3.0 specification.
+ * All multiple-byte fields are represented in host-endian format.
+ */
+struct libusb_ss_usb_device_capability_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
+ * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
+ uint8_t bDescriptorType;
+
+ /** Capability type. Will have value
+ * \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY
+ * LIBUSB_BT_SS_USB_DEVICE_CAPABILITY in this context. */
+ uint8_t bDevCapabilityType;
+
+ /** Bitmap encoding of supported device level features.
+ * A value of one in a bit location indicates a feature is
+ * supported; a value of zero indicates it is not supported.
+ * See \ref libusb_ss_usb_device_capability_attributes. */
+ uint8_t bmAttributes;
+
+ /** Bitmap encoding of the speed supported by this device when
+ * operating in SuperSpeed mode. See \ref libusb_supported_speed. */
+ uint16_t wSpeedSupported;
+
+ /** The lowest speed at which all the functionality supported
+ * by the device is available to the user. For example if the
+ * device supports all its functionality when connected at
+ * full speed and above then it sets this value to 1. */
+ uint8_t bFunctionalitySupport;
+
+ /** U1 Device Exit Latency. */
+ uint8_t bU1DevExitLat;
+
+ /** U2 Device Exit Latency. */
+ uint16_t bU2DevExitLat;
+};
+
+/** \ingroup desc
+ * A structure representing the Container ID descriptor.
+ * This descriptor is documented in section 9.6.2.3 of the USB 3.0 specification.
+ * All multiple-byte fields, except UUIDs, are represented in host-endian format.
+ */
+struct libusb_container_id_descriptor {
+ /** Size of this descriptor (in bytes) */
+ uint8_t bLength;
+
+ /** Descriptor type. Will have value
+ * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
+ * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
+ uint8_t bDescriptorType;
+
+ /** Capability type. Will have value
+ * \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID
+ * LIBUSB_BT_CONTAINER_ID in this context. */
+ uint8_t bDevCapabilityType;
+
+ /** Reserved field */
+ uint8_t bReserved;
+
+ /** 128 bit UUID */
+ uint8_t ContainerID[16];
+};
+
+/** \ingroup asyncio
+ * Setup packet for control transfers. */
+struct libusb_control_setup {
+ /** Request type. Bits 0:4 determine recipient, see
+ * \ref libusb_request_recipient. Bits 5:6 determine type, see
+ * \ref libusb_request_type. Bit 7 determines data transfer direction, see
+ * \ref libusb_endpoint_direction.
+ */
+ uint8_t bmRequestType;
+
+ /** Request. If the type bits of bmRequestType are equal to
+ * \ref libusb_request_type::LIBUSB_REQUEST_TYPE_STANDARD
+ * "LIBUSB_REQUEST_TYPE_STANDARD" then this field refers to
+ * \ref libusb_standard_request. For other cases, use of this field is
+ * application-specific. */
+ uint8_t bRequest;
+
+ /** Value. Varies according to request */
+ uint16_t wValue;
+
+ /** Index. Varies according to request, typically used to pass an index
+ * or offset */
+ uint16_t wIndex;
+
+ /** Number of bytes to transfer */
+ uint16_t wLength;
+};
+
+#define LIBUSB_CONTROL_SETUP_SIZE (sizeof(struct libusb_control_setup))
+
+/* libusb */
+
+struct libusb_context;
+struct libusb_device;
+struct libusb_device_handle;
+
+/** \ingroup lib
+ * Structure providing the version of the libusb runtime
+ */
+struct libusb_version {
+ /** Library major version. */
+ const uint16_t major;
+
+ /** Library minor version. */
+ const uint16_t minor;
+
+ /** Library micro version. */
+ const uint16_t micro;
+
+ /** Library nano version. */
+ const uint16_t nano;
+
+ /** Library release candidate suffix string, e.g. "-rc4". */
+ const char *rc;
+
+ /** For ABI compatibility only. */
+ const char* describe;
+};
+
+/** \ingroup lib
+ * Structure representing a libusb session. The concept of individual libusb
+ * sessions allows for your program to use two libraries (or dynamically
+ * load two modules) which both independently use libusb. This will prevent
+ * interference between the individual libusb users - for example
+ * libusb_set_debug() will not affect the other user of the library, and
+ * libusb_exit() will not destroy resources that the other user is still
+ * using.
+ *
+ * Sessions are created by libusb_init() and destroyed through libusb_exit().
+ * If your application is guaranteed to only ever include a single libusb
+ * user (i.e. you), you do not have to worry about contexts: pass NULL in
+ * every function call where a context is required. The default context
+ * will be used.
+ *
+ * For more information, see \ref contexts.
+ */
+typedef struct libusb_context libusb_context;
+
+/** \ingroup dev
+ * Structure representing a USB device detected on the system. This is an
+ * opaque type for which you are only ever provided with a pointer, usually
+ * originating from libusb_get_device_list().
+ *
+ * Certain operations can be performed on a device, but in order to do any
+ * I/O you will have to first obtain a device handle using libusb_open().
+ *
+ * Devices are reference counted with libusb_ref_device() and
+ * libusb_unref_device(), and are freed when the reference count reaches 0.
+ * New devices presented by libusb_get_device_list() have a reference count of
+ * 1, and libusb_free_device_list() can optionally decrease the reference count
+ * on all devices in the list. libusb_open() adds another reference which is
+ * later destroyed by libusb_close().
+ */
+typedef struct libusb_device libusb_device;
+
+
+/** \ingroup dev
+ * Structure representing a handle on a USB device. This is an opaque type for
+ * which you are only ever provided with a pointer, usually originating from
+ * libusb_open().
+ *
+ * A device handle is used to perform I/O and other operations. When finished
+ * with a device handle, you should call libusb_close().
+ */
+typedef struct libusb_device_handle libusb_device_handle;
+
+/** \ingroup dev
+ * Speed codes. Indicates the speed at which the device is operating.
+ */
+enum libusb_speed {
+ /** The OS doesn't report or know the device speed. */
+ LIBUSB_SPEED_UNKNOWN = 0,
+
+ /** The device is operating at low speed (1.5MBit/s). */
+ LIBUSB_SPEED_LOW = 1,
+
+ /** The device is operating at full speed (12MBit/s). */
+ LIBUSB_SPEED_FULL = 2,
+
+ /** The device is operating at high speed (480MBit/s). */
+ LIBUSB_SPEED_HIGH = 3,
+
+ /** The device is operating at super speed (5000MBit/s). */
+ LIBUSB_SPEED_SUPER = 4,
+};
+
+/** \ingroup dev
+ * Supported speeds (wSpeedSupported) bitfield. Indicates what
+ * speeds the device supports.
+ */
+enum libusb_supported_speed {
+ /** Low speed operation supported (1.5MBit/s). */
+ LIBUSB_LOW_SPEED_OPERATION = 1,
+
+ /** Full speed operation supported (12MBit/s). */
+ LIBUSB_FULL_SPEED_OPERATION = 2,
+
+ /** High speed operation supported (480MBit/s). */
+ LIBUSB_HIGH_SPEED_OPERATION = 4,
+
+ /** Superspeed operation supported (5000MBit/s). */
+ LIBUSB_SUPER_SPEED_OPERATION = 8,
+};
+
+/** \ingroup dev
+ * Masks for the bits of the
+ * \ref libusb_usb_2_0_extension_descriptor::bmAttributes "bmAttributes" field
+ * of the USB 2.0 Extension descriptor.
+ */
+enum libusb_usb_2_0_extension_attributes {
+ /** Supports Link Power Management (LPM) */
+ LIBUSB_BM_LPM_SUPPORT = 2,
+};
+
+/** \ingroup dev
+ * Masks for the bits of the
+ * \ref libusb_ss_usb_device_capability_descriptor::bmAttributes "bmAttributes" field
+ * field of the SuperSpeed USB Device Capability descriptor.
+ */
+enum libusb_ss_usb_device_capability_attributes {
+ /** Supports Latency Tolerance Messages (LTM) */
+ LIBUSB_BM_LTM_SUPPORT = 2,
+};
+
+/** \ingroup dev
+ * USB capability types
+ */
+enum libusb_bos_type {
+ /** Wireless USB device capability */
+ LIBUSB_BT_WIRELESS_USB_DEVICE_CAPABILITY = 1,
+
+ /** USB 2.0 extensions */
+ LIBUSB_BT_USB_2_0_EXTENSION = 2,
+
+ /** SuperSpeed USB device capability */
+ LIBUSB_BT_SS_USB_DEVICE_CAPABILITY = 3,
+
+ /** Container ID type */
+ LIBUSB_BT_CONTAINER_ID = 4,
+};
+
+/** \ingroup misc
+ * Error codes. Most libusb functions return 0 on success or one of these
+ * codes on failure.
+ * You can call libusb_error_name() to retrieve a string representation of an
+ * error code or libusb_strerror() to get an end-user suitable description of
+ * an error code.
+ */
+enum libusb_error {
+ /** Success (no error) */
+ LIBUSB_SUCCESS = 0,
+
+ /** Input/output error */
+ LIBUSB_ERROR_IO = -1,
+
+ /** Invalid parameter */
+ LIBUSB_ERROR_INVALID_PARAM = -2,
+
+ /** Access denied (insufficient permissions) */
+ LIBUSB_ERROR_ACCESS = -3,
+
+ /** No such device (it may have been disconnected) */
+ LIBUSB_ERROR_NO_DEVICE = -4,
+
+ /** Entity not found */
+ LIBUSB_ERROR_NOT_FOUND = -5,
+
+ /** Resource busy */
+ LIBUSB_ERROR_BUSY = -6,
+
+ /** Operation timed out */
+ LIBUSB_ERROR_TIMEOUT = -7,
+
+ /** Overflow */
+ LIBUSB_ERROR_OVERFLOW = -8,
+
+ /** Pipe error */
+ LIBUSB_ERROR_PIPE = -9,
+
+ /** System call interrupted (perhaps due to signal) */
+ LIBUSB_ERROR_INTERRUPTED = -10,
+
+ /** Insufficient memory */
+ LIBUSB_ERROR_NO_MEM = -11,
+
+ /** Operation not supported or unimplemented on this platform */
+ LIBUSB_ERROR_NOT_SUPPORTED = -12,
+
+ /* NB: Remember to update LIBUSB_ERROR_COUNT below as well as the
+ message strings in strerror.c when adding new error codes here. */
+
+ /** Other error */
+ LIBUSB_ERROR_OTHER = -99,
+};
+
+/* Total number of error codes in enum libusb_error */
+#define LIBUSB_ERROR_COUNT 14
+
+/** \ingroup asyncio
+ * Transfer status codes */
+enum libusb_transfer_status {
+ /** Transfer completed without error. Note that this does not indicate
+ * that the entire amount of requested data was transferred. */
+ LIBUSB_TRANSFER_COMPLETED,
+
+ /** Transfer failed */
+ LIBUSB_TRANSFER_ERROR,
+
+ /** Transfer timed out */
+ LIBUSB_TRANSFER_TIMED_OUT,
+
+ /** Transfer was cancelled */
+ LIBUSB_TRANSFER_CANCELLED,
+
+ /** For bulk/interrupt endpoints: halt condition detected (endpoint
+ * stalled). For control endpoints: control request not supported. */
+ LIBUSB_TRANSFER_STALL,
+
+ /** Device was disconnected */
+ LIBUSB_TRANSFER_NO_DEVICE,
+
+ /** Device sent more data than requested */
+ LIBUSB_TRANSFER_OVERFLOW,
+
+ /* NB! Remember to update libusb_error_name()
+ when adding new status codes here. */
+};
+
+/** \ingroup asyncio
+ * libusb_transfer.flags values */
+enum libusb_transfer_flags {
+ /** Report short frames as errors */
+ LIBUSB_TRANSFER_SHORT_NOT_OK = 1<<0,
+
+ /** Automatically free() transfer buffer during libusb_free_transfer() */
+ LIBUSB_TRANSFER_FREE_BUFFER = 1<<1,
+
+ /** Automatically call libusb_free_transfer() after callback returns.
+ * If this flag is set, it is illegal to call libusb_free_transfer()
+ * from your transfer callback, as this will result in a double-free
+ * when this flag is acted upon. */
+ LIBUSB_TRANSFER_FREE_TRANSFER = 1<<2,
+
+ /** Terminate transfers that are a multiple of the endpoint's
+ * wMaxPacketSize with an extra zero length packet. This is useful
+ * when a device protocol mandates that each logical request is
+ * terminated by an incomplete packet (i.e. the logical requests are
+ * not separated by other means).
+ *
+ * This flag only affects host-to-device transfers to bulk and interrupt
+ * endpoints. In other situations, it is ignored.
+ *
+ * This flag only affects transfers with a length that is a multiple of
+ * the endpoint's wMaxPacketSize. On transfers of other lengths, this
+ * flag has no effect. Therefore, if you are working with a device that
+ * needs a ZLP whenever the end of the logical request falls on a packet
+ * boundary, then it is sensible to set this flag on <em>every</em>
+ * transfer (you do not have to worry about only setting it on transfers
+ * that end on the boundary).
+ *
+ * This flag is currently only supported on Linux.
+ * On other systems, libusb_submit_transfer() will return
+ * LIBUSB_ERROR_NOT_SUPPORTED for every transfer where this flag is set.
+ *
+ * Available since libusb-1.0.9.
+ */
+ LIBUSB_TRANSFER_ADD_ZERO_PACKET = 1 << 3,
+};
+
+/** \ingroup asyncio
+ * Isochronous packet descriptor. */
+struct libusb_iso_packet_descriptor {
+ /** Length of data to request in this packet */
+ unsigned int length;
+
+ /** Amount of data that was actually transferred */
+ unsigned int actual_length;
+
+ /** Status code for this packet */
+ enum libusb_transfer_status status;
+};
+
+struct libusb_transfer;
+
+/** \ingroup asyncio
+ * Asynchronous transfer callback function type. When submitting asynchronous
+ * transfers, you pass a pointer to a callback function of this type via the
+ * \ref libusb_transfer::callback "callback" member of the libusb_transfer
+ * structure. libusb will call this function later, when the transfer has
+ * completed or failed. See \ref asyncio for more information.
+ * \param transfer The libusb_transfer struct the callback function is being
+ * notified about.
+ */
+typedef void (LIBUSB_CALL *libusb_transfer_cb_fn)(struct libusb_transfer *transfer);
+
+/** \ingroup asyncio
+ * The generic USB transfer structure. The user populates this structure and
+ * then submits it in order to request a transfer. After the transfer has
+ * completed, the library populates the transfer with the results and passes
+ * it back to the user.
+ */
+struct libusb_transfer {
+ /** Handle of the device that this transfer will be submitted to */
+ libusb_device_handle *dev_handle;
+
+ /** A bitwise OR combination of \ref libusb_transfer_flags. */
+ uint8_t flags;
+
+ /** Address of the endpoint where this transfer will be sent. */
+ unsigned char endpoint;
+
+ /** Type of the endpoint from \ref libusb_transfer_type */
+ unsigned char type;
+
+ /** Timeout for this transfer in millseconds. A value of 0 indicates no
+ * timeout. */
+ unsigned int timeout;
+
+ /** The status of the transfer. Read-only, and only for use within
+ * transfer callback function.
+ *
+ * If this is an isochronous transfer, this field may read COMPLETED even
+ * if there were errors in the frames. Use the
+ * \ref libusb_iso_packet_descriptor::status "status" field in each packet
+ * to determine if errors occurred. */
+ enum libusb_transfer_status status;
+
+ /** Length of the data buffer */
+ int length;
+
+ /** Actual length of data that was transferred. Read-only, and only for
+ * use within transfer callback function. Not valid for isochronous
+ * endpoint transfers. */
+ int actual_length;
+
+ /** Callback function. This will be invoked when the transfer completes,
+ * fails, or is cancelled. */
+ libusb_transfer_cb_fn callback;
+
+ /** User context data to pass to the callback function. */
+ void *user_data;
+
+ /** Data buffer */
+ unsigned char *buffer;
+
+ /** Number of isochronous packets. Only used for I/O with isochronous
+ * endpoints. */
+ int num_iso_packets;
+
+ /** Isochronous packet descriptors, for isochronous transfers only. */
+ struct libusb_iso_packet_descriptor iso_packet_desc
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+/** \ingroup misc
+ * Capabilities supported by an instance of libusb on the current running
+ * platform. Test if the loaded library supports a given capability by calling
+ * \ref libusb_has_capability().
+ */
+enum libusb_capability {
+ /** The libusb_has_capability() API is available. */
+ LIBUSB_CAP_HAS_CAPABILITY = 0x0000,
+ /** Hotplug support is available on this platform. */
+ LIBUSB_CAP_HAS_HOTPLUG = 0x0001,
+ /** The library can access HID devices without requiring user intervention.
+ * Note that before being able to actually access an HID device, you may
+ * still have to call additional libusb functions such as
+ * \ref libusb_detach_kernel_driver(). */
+ LIBUSB_CAP_HAS_HID_ACCESS = 0x0100,
+ /** The library supports detaching of the default USB driver, using
+ * \ref libusb_detach_kernel_driver(), if one is set by the OS kernel */
+ LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER = 0x0101
+};
+
+/** \ingroup lib
+ * Log message levels.
+ * - LIBUSB_LOG_LEVEL_NONE (0) : no messages ever printed by the library (default)
+ * - LIBUSB_LOG_LEVEL_ERROR (1) : error messages are printed to stderr
+ * - LIBUSB_LOG_LEVEL_WARNING (2) : warning and error messages are printed to stderr
+ * - LIBUSB_LOG_LEVEL_INFO (3) : informational messages are printed to stdout, warning
+ * and error messages are printed to stderr
+ * - LIBUSB_LOG_LEVEL_DEBUG (4) : debug and informational messages are printed to stdout,
+ * warnings and errors to stderr
+ */
+enum libusb_log_level {
+ LIBUSB_LOG_LEVEL_NONE = 0,
+ LIBUSB_LOG_LEVEL_ERROR,
+ LIBUSB_LOG_LEVEL_WARNING,
+ LIBUSB_LOG_LEVEL_INFO,
+ LIBUSB_LOG_LEVEL_DEBUG,
+};
+
+int LIBUSB_CALL libusb_init(libusb_context **ctx);
+void LIBUSB_CALL libusb_exit(libusb_context *ctx);
+void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
+const struct libusb_version * LIBUSB_CALL libusb_get_version(void);
+int LIBUSB_CALL libusb_has_capability(uint32_t capability);
+const char * LIBUSB_CALL libusb_error_name(int errcode);
+int LIBUSB_CALL libusb_setlocale(const char *locale);
+const char * LIBUSB_CALL libusb_strerror(enum libusb_error errcode);
+
+ssize_t LIBUSB_CALL libusb_get_device_list(libusb_context *ctx,
+ libusb_device ***list);
+void LIBUSB_CALL libusb_free_device_list(libusb_device **list,
+ int unref_devices);
+libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev);
+void LIBUSB_CALL libusb_unref_device(libusb_device *dev);
+
+int LIBUSB_CALL libusb_get_configuration(libusb_device_handle *dev,
+ int *config);
+int LIBUSB_CALL libusb_get_device_descriptor(libusb_device *dev,
+ struct libusb_device_descriptor *desc);
+int LIBUSB_CALL libusb_get_active_config_descriptor(libusb_device *dev,
+ struct libusb_config_descriptor **config);
+int LIBUSB_CALL libusb_get_config_descriptor(libusb_device *dev,
+ uint8_t config_index, struct libusb_config_descriptor **config);
+int LIBUSB_CALL libusb_get_config_descriptor_by_value(libusb_device *dev,
+ uint8_t bConfigurationValue, struct libusb_config_descriptor **config);
+void LIBUSB_CALL libusb_free_config_descriptor(
+ struct libusb_config_descriptor *config);
+int LIBUSB_CALL libusb_get_ss_endpoint_companion_descriptor(
+ struct libusb_context *ctx,
+ const struct libusb_endpoint_descriptor *endpoint,
+ struct libusb_ss_endpoint_companion_descriptor **ep_comp);
+void LIBUSB_CALL libusb_free_ss_endpoint_companion_descriptor(
+ struct libusb_ss_endpoint_companion_descriptor *ep_comp);
+int LIBUSB_CALL libusb_get_bos_descriptor(libusb_device_handle *handle,
+ struct libusb_bos_descriptor **bos);
+void LIBUSB_CALL libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos);
+int LIBUSB_CALL libusb_get_usb_2_0_extension_descriptor(
+ struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension);
+void LIBUSB_CALL libusb_free_usb_2_0_extension_descriptor(
+ struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension);
+int LIBUSB_CALL libusb_get_ss_usb_device_capability_descriptor(
+ struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap);
+void LIBUSB_CALL libusb_free_ss_usb_device_capability_descriptor(
+ struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap);
+int LIBUSB_CALL libusb_get_container_id_descriptor(struct libusb_context *ctx,
+ struct libusb_bos_dev_capability_descriptor *dev_cap,
+ struct libusb_container_id_descriptor **container_id);
+void LIBUSB_CALL libusb_free_container_id_descriptor(
+ struct libusb_container_id_descriptor *container_id);
+uint8_t LIBUSB_CALL libusb_get_bus_number(libusb_device *dev);
+uint8_t LIBUSB_CALL libusb_get_port_number(libusb_device *dev);
+int LIBUSB_CALL libusb_get_port_numbers(libusb_device *dev, uint8_t* port_numbers, int port_numbers_len);
+LIBUSB_DEPRECATED_FOR(libusb_get_port_numbers)
+int LIBUSB_CALL libusb_get_port_path(libusb_context *ctx, libusb_device *dev, uint8_t* path, uint8_t path_length);
+libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev);
+uint8_t LIBUSB_CALL libusb_get_device_address(libusb_device *dev);
+int LIBUSB_CALL libusb_get_device_speed(libusb_device *dev);
+int LIBUSB_CALL libusb_get_max_packet_size(libusb_device *dev,
+ unsigned char endpoint);
+int LIBUSB_CALL libusb_get_max_iso_packet_size(libusb_device *dev,
+ unsigned char endpoint);
+
+int LIBUSB_CALL libusb_open(libusb_device *dev, libusb_device_handle **handle);
+void LIBUSB_CALL libusb_close(libusb_device_handle *dev_handle);
+libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle);
+
+int LIBUSB_CALL libusb_set_configuration(libusb_device_handle *dev,
+ int configuration);
+int LIBUSB_CALL libusb_claim_interface(libusb_device_handle *dev,
+ int interface_number);
+int LIBUSB_CALL libusb_release_interface(libusb_device_handle *dev,
+ int interface_number);
+
+libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid(
+ libusb_context *ctx, uint16_t vendor_id, uint16_t product_id);
+
+int LIBUSB_CALL libusb_set_interface_alt_setting(libusb_device_handle *dev,
+ int interface_number, int alternate_setting);
+int LIBUSB_CALL libusb_clear_halt(libusb_device_handle *dev,
+ unsigned char endpoint);
+int LIBUSB_CALL libusb_reset_device(libusb_device_handle *dev);
+
+int LIBUSB_CALL libusb_alloc_streams(libusb_device_handle *dev,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints);
+int LIBUSB_CALL libusb_free_streams(libusb_device_handle *dev,
+ unsigned char *endpoints, int num_endpoints);
+
+int LIBUSB_CALL libusb_kernel_driver_active(libusb_device_handle *dev,
+ int interface_number);
+int LIBUSB_CALL libusb_detach_kernel_driver(libusb_device_handle *dev,
+ int interface_number);
+int LIBUSB_CALL libusb_attach_kernel_driver(libusb_device_handle *dev,
+ int interface_number);
+int LIBUSB_CALL libusb_set_auto_detach_kernel_driver(
+ libusb_device_handle *dev, int enable);
+
+/* async I/O */
+
+/** \ingroup asyncio
+ * Get the data section of a control transfer. This convenience function is here
+ * to remind you that the data does not start until 8 bytes into the actual
+ * buffer, as the setup packet comes first.
+ *
+ * Calling this function only makes sense from a transfer callback function,
+ * or situations where you have already allocated a suitably sized buffer at
+ * transfer->buffer.
+ *
+ * \param transfer a transfer
+ * \returns pointer to the first byte of the data section
+ */
+static inline unsigned char *libusb_control_transfer_get_data(
+ struct libusb_transfer *transfer)
+{
+ return transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
+}
+
+/** \ingroup asyncio
+ * Get the control setup packet of a control transfer. This convenience
+ * function is here to remind you that the control setup occupies the first
+ * 8 bytes of the transfer data buffer.
+ *
+ * Calling this function only makes sense from a transfer callback function,
+ * or situations where you have already allocated a suitably sized buffer at
+ * transfer->buffer.
+ *
+ * \param transfer a transfer
+ * \returns a casted pointer to the start of the transfer data buffer
+ */
+static inline struct libusb_control_setup *libusb_control_transfer_get_setup(
+ struct libusb_transfer *transfer)
+{
+ return (struct libusb_control_setup *)(void *) transfer->buffer;
+}
+
+/** \ingroup asyncio
+ * Helper function to populate the setup packet (first 8 bytes of the data
+ * buffer) for a control transfer. The wIndex, wValue and wLength values should
+ * be given in host-endian byte order.
+ *
+ * \param buffer buffer to output the setup packet into
+ * This pointer must be aligned to at least 2 bytes boundary.
+ * \param bmRequestType see the
+ * \ref libusb_control_setup::bmRequestType "bmRequestType" field of
+ * \ref libusb_control_setup
+ * \param bRequest see the
+ * \ref libusb_control_setup::bRequest "bRequest" field of
+ * \ref libusb_control_setup
+ * \param wValue see the
+ * \ref libusb_control_setup::wValue "wValue" field of
+ * \ref libusb_control_setup
+ * \param wIndex see the
+ * \ref libusb_control_setup::wIndex "wIndex" field of
+ * \ref libusb_control_setup
+ * \param wLength see the
+ * \ref libusb_control_setup::wLength "wLength" field of
+ * \ref libusb_control_setup
+ */
+static inline void libusb_fill_control_setup(unsigned char *buffer,
+ uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
+ uint16_t wLength)
+{
+ struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer;
+ setup->bmRequestType = bmRequestType;
+ setup->bRequest = bRequest;
+ setup->wValue = libusb_cpu_to_le16(wValue);
+ setup->wIndex = libusb_cpu_to_le16(wIndex);
+ setup->wLength = libusb_cpu_to_le16(wLength);
+}
+
+struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(int iso_packets);
+int LIBUSB_CALL libusb_submit_transfer(struct libusb_transfer *transfer);
+int LIBUSB_CALL libusb_cancel_transfer(struct libusb_transfer *transfer);
+void LIBUSB_CALL libusb_free_transfer(struct libusb_transfer *transfer);
+void LIBUSB_CALL libusb_transfer_set_stream_id(
+ struct libusb_transfer *transfer, uint32_t stream_id);
+uint32_t LIBUSB_CALL libusb_transfer_get_stream_id(
+ struct libusb_transfer *transfer);
+
+/** \ingroup asyncio
+ * Helper function to populate the required \ref libusb_transfer fields
+ * for a control transfer.
+ *
+ * If you pass a transfer buffer to this function, the first 8 bytes will
+ * be interpreted as a control setup packet, and the wLength field will be
+ * used to automatically populate the \ref libusb_transfer::length "length"
+ * field of the transfer. Therefore the recommended approach is:
+ * -# Allocate a suitably sized data buffer (including space for control setup)
+ * -# Call libusb_fill_control_setup()
+ * -# If this is a host-to-device transfer with a data stage, put the data
+ * in place after the setup packet
+ * -# Call this function
+ * -# Call libusb_submit_transfer()
+ *
+ * It is also legal to pass a NULL buffer to this function, in which case this
+ * function will not attempt to populate the length field. Remember that you
+ * must then populate the buffer and length fields later.
+ *
+ * \param transfer the transfer to populate
+ * \param dev_handle handle of the device that will handle the transfer
+ * \param buffer data buffer. If provided, this function will interpret the
+ * first 8 bytes as a setup packet and infer the transfer length from that.
+ * This pointer must be aligned to at least 2 bytes boundary.
+ * \param callback callback function to be invoked on transfer completion
+ * \param user_data user data to pass to callback function
+ * \param timeout timeout for the transfer in milliseconds
+ */
+static inline void libusb_fill_control_transfer(
+ struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
+ unsigned char *buffer, libusb_transfer_cb_fn callback, void *user_data,
+ unsigned int timeout)
+{
+ struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer;
+ transfer->dev_handle = dev_handle;
+ transfer->endpoint = 0;
+ transfer->type = LIBUSB_TRANSFER_TYPE_CONTROL;
+ transfer->timeout = timeout;
+ transfer->buffer = buffer;
+ if (setup)
+ transfer->length = (int) (LIBUSB_CONTROL_SETUP_SIZE
+ + libusb_le16_to_cpu(setup->wLength));
+ transfer->user_data = user_data;
+ transfer->callback = callback;
+}
+
+/** \ingroup asyncio
+ * Helper function to populate the required \ref libusb_transfer fields
+ * for a bulk transfer.
+ *
+ * \param transfer the transfer to populate
+ * \param dev_handle handle of the device that will handle the transfer
+ * \param endpoint address of the endpoint where this transfer will be sent
+ * \param buffer data buffer
+ * \param length length of data buffer
+ * \param callback callback function to be invoked on transfer completion
+ * \param user_data user data to pass to callback function
+ * \param timeout timeout for the transfer in milliseconds
+ */
+static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer,
+ libusb_device_handle *dev_handle, unsigned char endpoint,
+ unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
+ void *user_data, unsigned int timeout)
+{
+ transfer->dev_handle = dev_handle;
+ transfer->endpoint = endpoint;
+ transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
+ transfer->timeout = timeout;
+ transfer->buffer = buffer;
+ transfer->length = length;
+ transfer->user_data = user_data;
+ transfer->callback = callback;
+}
+
+/** \ingroup asyncio
+ * Helper function to populate the required \ref libusb_transfer fields
+ * for a bulk transfer using bulk streams.
+ *
+ * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
+ *
+ * \param transfer the transfer to populate
+ * \param dev_handle handle of the device that will handle the transfer
+ * \param endpoint address of the endpoint where this transfer will be sent
+ * \param stream_id bulk stream id for this transfer
+ * \param buffer data buffer
+ * \param length length of data buffer
+ * \param callback callback function to be invoked on transfer completion
+ * \param user_data user data to pass to callback function
+ * \param timeout timeout for the transfer in milliseconds
+ */
+static inline void libusb_fill_bulk_stream_transfer(
+ struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
+ unsigned char endpoint, uint32_t stream_id,
+ unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
+ void *user_data, unsigned int timeout)
+{
+ libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer,
+ length, callback, user_data, timeout);
+ transfer->type = LIBUSB_TRANSFER_TYPE_BULK_STREAM;
+ libusb_transfer_set_stream_id(transfer, stream_id);
+}
+
+/** \ingroup asyncio
+ * Helper function to populate the required \ref libusb_transfer fields
+ * for an interrupt transfer.
+ *
+ * \param transfer the transfer to populate
+ * \param dev_handle handle of the device that will handle the transfer
+ * \param endpoint address of the endpoint where this transfer will be sent
+ * \param buffer data buffer
+ * \param length length of data buffer
+ * \param callback callback function to be invoked on transfer completion
+ * \param user_data user data to pass to callback function
+ * \param timeout timeout for the transfer in milliseconds
+ */
+static inline void libusb_fill_interrupt_transfer(
+ struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
+ unsigned char endpoint, unsigned char *buffer, int length,
+ libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
+{
+ transfer->dev_handle = dev_handle;
+ transfer->endpoint = endpoint;
+ transfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT;
+ transfer->timeout = timeout;
+ transfer->buffer = buffer;
+ transfer->length = length;
+ transfer->user_data = user_data;
+ transfer->callback = callback;
+}
+
+/** \ingroup asyncio
+ * Helper function to populate the required \ref libusb_transfer fields
+ * for an isochronous transfer.
+ *
+ * \param transfer the transfer to populate
+ * \param dev_handle handle of the device that will handle the transfer
+ * \param endpoint address of the endpoint where this transfer will be sent
+ * \param buffer data buffer
+ * \param length length of data buffer
+ * \param num_iso_packets the number of isochronous packets
+ * \param callback callback function to be invoked on transfer completion
+ * \param user_data user data to pass to callback function
+ * \param timeout timeout for the transfer in milliseconds
+ */
+static inline void libusb_fill_iso_transfer(struct libusb_transfer *transfer,
+ libusb_device_handle *dev_handle, unsigned char endpoint,
+ unsigned char *buffer, int length, int num_iso_packets,
+ libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
+{
+ transfer->dev_handle = dev_handle;
+ transfer->endpoint = endpoint;
+ transfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS;
+ transfer->timeout = timeout;
+ transfer->buffer = buffer;
+ transfer->length = length;
+ transfer->num_iso_packets = num_iso_packets;
+ transfer->user_data = user_data;
+ transfer->callback = callback;
+}
+
+/** \ingroup asyncio
+ * Convenience function to set the length of all packets in an isochronous
+ * transfer, based on the num_iso_packets field in the transfer structure.
+ *
+ * \param transfer a transfer
+ * \param length the length to set in each isochronous packet descriptor
+ * \see libusb_get_max_packet_size()
+ */
+static inline void libusb_set_iso_packet_lengths(
+ struct libusb_transfer *transfer, unsigned int length)
+{
+ int i;
+ for (i = 0; i < transfer->num_iso_packets; i++)
+ transfer->iso_packet_desc[i].length = length;
+}
+
+/** \ingroup asyncio
+ * Convenience function to locate the position of an isochronous packet
+ * within the buffer of an isochronous transfer.
+ *
+ * This is a thorough function which loops through all preceding packets,
+ * accumulating their lengths to find the position of the specified packet.
+ * Typically you will assign equal lengths to each packet in the transfer,
+ * and hence the above method is sub-optimal. You may wish to use
+ * libusb_get_iso_packet_buffer_simple() instead.
+ *
+ * \param transfer a transfer
+ * \param packet the packet to return the address of
+ * \returns the base address of the packet buffer inside the transfer buffer,
+ * or NULL if the packet does not exist.
+ * \see libusb_get_iso_packet_buffer_simple()
+ */
+static inline unsigned char *libusb_get_iso_packet_buffer(
+ struct libusb_transfer *transfer, unsigned int packet)
+{
+ int i;
+ size_t offset = 0;
+ int _packet;
+
+ /* oops..slight bug in the API. packet is an unsigned int, but we use
+ * signed integers almost everywhere else. range-check and convert to
+ * signed to avoid compiler warnings. FIXME for libusb-2. */
+ if (packet > INT_MAX)
+ return NULL;
+ _packet = (int) packet;
+
+ if (_packet >= transfer->num_iso_packets)
+ return NULL;
+
+ for (i = 0; i < _packet; i++)
+ offset += transfer->iso_packet_desc[i].length;
+
+ return transfer->buffer + offset;
+}
+
+/** \ingroup asyncio
+ * Convenience function to locate the position of an isochronous packet
+ * within the buffer of an isochronous transfer, for transfers where each
+ * packet is of identical size.
+ *
+ * This function relies on the assumption that every packet within the transfer
+ * is of identical size to the first packet. Calculating the location of
+ * the packet buffer is then just a simple calculation:
+ * <tt>buffer + (packet_size * packet)</tt>
+ *
+ * Do not use this function on transfers other than those that have identical
+ * packet lengths for each packet.
+ *
+ * \param transfer a transfer
+ * \param packet the packet to return the address of
+ * \returns the base address of the packet buffer inside the transfer buffer,
+ * or NULL if the packet does not exist.
+ * \see libusb_get_iso_packet_buffer()
+ */
+static inline unsigned char *libusb_get_iso_packet_buffer_simple(
+ struct libusb_transfer *transfer, unsigned int packet)
+{
+ int _packet;
+
+ /* oops..slight bug in the API. packet is an unsigned int, but we use
+ * signed integers almost everywhere else. range-check and convert to
+ * signed to avoid compiler warnings. FIXME for libusb-2. */
+ if (packet > INT_MAX)
+ return NULL;
+ _packet = (int) packet;
+
+ if (_packet >= transfer->num_iso_packets)
+ return NULL;
+
+ return transfer->buffer + ((int) transfer->iso_packet_desc[0].length * _packet);
+}
+
+/* sync I/O */
+
+int LIBUSB_CALL libusb_control_transfer(libusb_device_handle *dev_handle,
+ uint8_t request_type, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
+ unsigned char *data, uint16_t wLength, unsigned int timeout);
+
+int LIBUSB_CALL libusb_bulk_transfer(libusb_device_handle *dev_handle,
+ unsigned char endpoint, unsigned char *data, int length,
+ int *actual_length, unsigned int timeout);
+
+int LIBUSB_CALL libusb_interrupt_transfer(libusb_device_handle *dev_handle,
+ unsigned char endpoint, unsigned char *data, int length,
+ int *actual_length, unsigned int timeout);
+
+/** \ingroup desc
+ * Retrieve a descriptor from the default control pipe.
+ * This is a convenience function which formulates the appropriate control
+ * message to retrieve the descriptor.
+ *
+ * \param dev a device handle
+ * \param desc_type the descriptor type, see \ref libusb_descriptor_type
+ * \param desc_index the index of the descriptor to retrieve
+ * \param data output buffer for descriptor
+ * \param length size of data buffer
+ * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
+ */
+static inline int libusb_get_descriptor(libusb_device_handle *dev,
+ uint8_t desc_type, uint8_t desc_index, unsigned char *data, int length)
+{
+ return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
+ LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t) ((desc_type << 8) | desc_index),
+ 0, data, (uint16_t) length, 1000);
+}
+
+/** \ingroup desc
+ * Retrieve a descriptor from a device.
+ * This is a convenience function which formulates the appropriate control
+ * message to retrieve the descriptor. The string returned is Unicode, as
+ * detailed in the USB specifications.
+ *
+ * \param dev a device handle
+ * \param desc_index the index of the descriptor to retrieve
+ * \param langid the language ID for the string descriptor
+ * \param data output buffer for descriptor
+ * \param length size of data buffer
+ * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
+ * \see libusb_get_string_descriptor_ascii()
+ */
+static inline int libusb_get_string_descriptor(libusb_device_handle *dev,
+ uint8_t desc_index, uint16_t langid, unsigned char *data, int length)
+{
+ return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
+ LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t)((LIBUSB_DT_STRING << 8) | desc_index),
+ langid, data, (uint16_t) length, 1000);
+}
+
+int LIBUSB_CALL libusb_get_string_descriptor_ascii(libusb_device_handle *dev,
+ uint8_t desc_index, unsigned char *data, int length);
+
+/* polling and timeouts */
+
+int LIBUSB_CALL libusb_try_lock_events(libusb_context *ctx);
+void LIBUSB_CALL libusb_lock_events(libusb_context *ctx);
+void LIBUSB_CALL libusb_unlock_events(libusb_context *ctx);
+int LIBUSB_CALL libusb_event_handling_ok(libusb_context *ctx);
+int LIBUSB_CALL libusb_event_handler_active(libusb_context *ctx);
+void LIBUSB_CALL libusb_lock_event_waiters(libusb_context *ctx);
+void LIBUSB_CALL libusb_unlock_event_waiters(libusb_context *ctx);
+int LIBUSB_CALL libusb_wait_for_event(libusb_context *ctx, struct timeval *tv);
+
+int LIBUSB_CALL libusb_handle_events_timeout(libusb_context *ctx,
+ struct timeval *tv);
+int LIBUSB_CALL libusb_handle_events_timeout_completed(libusb_context *ctx,
+ struct timeval *tv, int *completed);
+int LIBUSB_CALL libusb_handle_events(libusb_context *ctx);
+int LIBUSB_CALL libusb_handle_events_completed(libusb_context *ctx, int *completed);
+int LIBUSB_CALL libusb_handle_events_locked(libusb_context *ctx,
+ struct timeval *tv);
+int LIBUSB_CALL libusb_pollfds_handle_timeouts(libusb_context *ctx);
+int LIBUSB_CALL libusb_get_next_timeout(libusb_context *ctx,
+ struct timeval *tv);
+
+/** \ingroup poll
+ * File descriptor for polling
+ */
+struct libusb_pollfd {
+ /** Numeric file descriptor */
+ int fd;
+
+ /** Event flags to poll for from <poll.h>. POLLIN indicates that you
+ * should monitor this file descriptor for becoming ready to read from,
+ * and POLLOUT indicates that you should monitor this file descriptor for
+ * nonblocking write readiness. */
+ short events;
+};
+
+/** \ingroup poll
+ * Callback function, invoked when a new file descriptor should be added
+ * to the set of file descriptors monitored for events.
+ * \param fd the new file descriptor
+ * \param events events to monitor for, see \ref libusb_pollfd for a
+ * description
+ * \param user_data User data pointer specified in
+ * libusb_set_pollfd_notifiers() call
+ * \see libusb_set_pollfd_notifiers()
+ */
+typedef void (LIBUSB_CALL *libusb_pollfd_added_cb)(int fd, short events,
+ void *user_data);
+
+/** \ingroup poll
+ * Callback function, invoked when a file descriptor should be removed from
+ * the set of file descriptors being monitored for events. After returning
+ * from this callback, do not use that file descriptor again.
+ * \param fd the file descriptor to stop monitoring
+ * \param user_data User data pointer specified in
+ * libusb_set_pollfd_notifiers() call
+ * \see libusb_set_pollfd_notifiers()
+ */
+typedef void (LIBUSB_CALL *libusb_pollfd_removed_cb)(int fd, void *user_data);
+
+const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds(
+ libusb_context *ctx);
+void LIBUSB_CALL libusb_free_pollfds(const struct libusb_pollfd **pollfds);
+void LIBUSB_CALL libusb_set_pollfd_notifiers(libusb_context *ctx,
+ libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb,
+ void *user_data);
+
+/** \ingroup hotplug
+ * Callback handle.
+ *
+ * Callbacks handles are generated by libusb_hotplug_register_callback()
+ * and can be used to deregister callbacks. Callback handles are unique
+ * per libusb_context and it is safe to call libusb_hotplug_deregister_callback()
+ * on an already deregisted callback.
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * For more information, see \ref hotplug.
+ */
+typedef int libusb_hotplug_callback_handle;
+
+/** \ingroup hotplug
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * Flags for hotplug events */
+typedef enum {
+ /** Default value when not using any flags. */
+ LIBUSB_HOTPLUG_NO_FLAGS = 0,
+
+ /** Arm the callback and fire it for all matching currently attached devices. */
+ LIBUSB_HOTPLUG_ENUMERATE = 1<<0,
+} libusb_hotplug_flag;
+
+/** \ingroup hotplug
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * Hotplug events */
+typedef enum {
+ /** A device has been plugged in and is ready to use */
+ LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED = 0x01,
+
+ /** A device has left and is no longer available.
+ * It is the user's responsibility to call libusb_close on any handle associated with a disconnected device.
+ * It is safe to call libusb_get_device_descriptor on a device that has left */
+ LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT = 0x02,
+} libusb_hotplug_event;
+
+/** \ingroup hotplug
+ * Wildcard matching for hotplug events */
+#define LIBUSB_HOTPLUG_MATCH_ANY -1
+
+/** \ingroup hotplug
+ * Hotplug callback function type. When requesting hotplug event notifications,
+ * you pass a pointer to a callback function of this type.
+ *
+ * This callback may be called by an internal event thread and as such it is
+ * recommended the callback do minimal processing before returning.
+ *
+ * libusb will call this function later, when a matching event had happened on
+ * a matching device. See \ref hotplug for more information.
+ *
+ * It is safe to call either libusb_hotplug_register_callback() or
+ * libusb_hotplug_deregister_callback() from within a callback function.
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * \param ctx context of this notification
+ * \param device libusb_device this event occurred on
+ * \param event event that occurred
+ * \param user_data user data provided when this callback was registered
+ * \returns bool whether this callback is finished processing events.
+ * returning 1 will cause this callback to be deregistered
+ */
+typedef int (LIBUSB_CALL *libusb_hotplug_callback_fn)(libusb_context *ctx,
+ libusb_device *device,
+ libusb_hotplug_event event,
+ void *user_data);
+
+/** \ingroup hotplug
+ * Register a hotplug callback function
+ *
+ * Register a callback with the libusb_context. The callback will fire
+ * when a matching event occurs on a matching device. The callback is
+ * armed until either it is deregistered with libusb_hotplug_deregister_callback()
+ * or the supplied callback returns 1 to indicate it is finished processing events.
+ *
+ * If the \ref LIBUSB_HOTPLUG_ENUMERATE is passed the callback will be
+ * called with a \ref LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED for all devices
+ * already plugged into the machine. Note that libusb modifies its internal
+ * device list from a separate thread, while calling hotplug callbacks from
+ * libusb_handle_events(), so it is possible for a device to already be present
+ * on, or removed from, its internal device list, while the hotplug callbacks
+ * still need to be dispatched. This means that when using \ref
+ * LIBUSB_HOTPLUG_ENUMERATE, your callback may be called twice for the arrival
+ * of the same device, once from libusb_hotplug_register_callback() and once
+ * from libusb_handle_events(); and/or your callback may be called for the
+ * removal of a device for which an arrived call was never made.
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * \param[in] ctx context to register this callback with
+ * \param[in] events bitwise or of events that will trigger this callback. See \ref
+ * libusb_hotplug_event
+ * \param[in] flags hotplug callback flags. See \ref libusb_hotplug_flag
+ * \param[in] vendor_id the vendor id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
+ * \param[in] product_id the product id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
+ * \param[in] dev_class the device class to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
+ * \param[in] cb_fn the function to be invoked on a matching event/device
+ * \param[in] user_data user data to pass to the callback function
+ * \param[out] handle pointer to store the handle of the allocated callback (can be NULL)
+ * \returns LIBUSB_SUCCESS on success LIBUSB_ERROR code on failure
+ */
+int LIBUSB_CALL libusb_hotplug_register_callback(libusb_context *ctx,
+ libusb_hotplug_event events,
+ libusb_hotplug_flag flags,
+ int vendor_id, int product_id,
+ int dev_class,
+ libusb_hotplug_callback_fn cb_fn,
+ void *user_data,
+ libusb_hotplug_callback_handle *handle);
+
+/** \ingroup hotplug
+ * Deregisters a hotplug callback.
+ *
+ * Deregister a callback from a libusb_context. This function is safe to call from within
+ * a hotplug callback.
+ *
+ * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
+ *
+ * \param[in] ctx context this callback is registered with
+ * \param[in] handle the handle of the callback to deregister
+ */
+void LIBUSB_CALL libusb_hotplug_deregister_callback(libusb_context *ctx,
+ libusb_hotplug_callback_handle handle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Internal header for libusb
+ * Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSBI_H
+#define LIBUSBI_H
+
+#include <config.h>
+
+#include <stdlib.h>
+
+#include <stddef.h>
+#include <stdint.h>
+#include <time.h>
+#include <stdarg.h>
+#ifdef HAVE_POLL_H
+#include <poll.h>
+#endif
+#ifdef HAVE_MISSING_H
+#include <missing.h>
+#endif
+
+#include "libusb.h"
+#include "version.h"
+
+/* Inside the libusb code, mark all public functions as follows:
+ * return_type API_EXPORTED function_name(params) { ... }
+ * But if the function returns a pointer, mark it as follows:
+ * DEFAULT_VISIBILITY return_type * LIBUSB_CALL function_name(params) { ... }
+ * In the libusb public header, mark all declarations as:
+ * return_type LIBUSB_CALL function_name(params);
+ */
+#define API_EXPORTED LIBUSB_CALL DEFAULT_VISIBILITY
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DEVICE_DESC_LENGTH 18
+
+#define USB_MAXENDPOINTS 32
+#define USB_MAXINTERFACES 32
+#define USB_MAXCONFIG 8
+
+/* Backend specific capabilities */
+#define USBI_CAP_HAS_HID_ACCESS 0x00010000
+#define USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER 0x00020000
+
+/* Maximum number of bytes in a log line */
+#define USBI_MAX_LOG_LEN 1024
+/* Terminator for log lines */
+#define USBI_LOG_LINE_END "\n"
+
+/* The following is used to silence warnings for unused variables */
+#define UNUSED(var) do { (void)(var); } while(0)
+
+#if !defined(ARRAYSIZE)
+#define ARRAYSIZE(array) (sizeof(array)/sizeof(array[0]))
+#endif
+
+struct list_head {
+ struct list_head *prev, *next;
+};
+
+/* Get an entry from the list
+ * ptr - the address of this list_head element in "type"
+ * type - the data type that contains "member"
+ * member - the list_head element in "type"
+ */
+#define list_entry(ptr, type, member) \
+ ((type *)((uintptr_t)(ptr) - (uintptr_t)offsetof(type, member)))
+
+#define list_first_entry(ptr, type, member) \
+ list_entry((ptr)->next, type, member)
+
+/* Get each entry from a list
+ * pos - A structure pointer has a "member" element
+ * head - list head
+ * member - the list_head element in "pos"
+ * type - the type of the first parameter
+ */
+#define list_for_each_entry(pos, head, member, type) \
+ for (pos = list_entry((head)->next, type, member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, type, member))
+
+#define list_for_each_entry_safe(pos, n, head, member, type) \
+ for (pos = list_entry((head)->next, type, member), \
+ n = list_entry(pos->member.next, type, member); \
+ &pos->member != (head); \
+ pos = n, n = list_entry(n->member.next, type, member))
+
+#define list_empty(entry) ((entry)->next == (entry))
+
+static inline void list_init(struct list_head *entry)
+{
+ entry->prev = entry->next = entry;
+}
+
+static inline void list_add(struct list_head *entry, struct list_head *head)
+{
+ entry->next = head->next;
+ entry->prev = head;
+
+ head->next->prev = entry;
+ head->next = entry;
+}
+
+static inline void list_add_tail(struct list_head *entry,
+ struct list_head *head)
+{
+ entry->next = head;
+ entry->prev = head->prev;
+
+ head->prev->next = entry;
+ head->prev = entry;
+}
+
+static inline void list_del(struct list_head *entry)
+{
+ entry->next->prev = entry->prev;
+ entry->prev->next = entry->next;
+ entry->next = entry->prev = NULL;
+}
+
+static inline void *usbi_reallocf(void *ptr, size_t size)
+{
+ void *ret = realloc(ptr, size);
+ if (!ret)
+ free(ptr);
+ return ret;
+}
+
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *mptr = (ptr); \
+ (type *)( (char *)mptr - offsetof(type,member) );})
+
+#ifndef MIN
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#endif
+#ifndef MAX
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#endif
+
+#define TIMESPEC_IS_SET(ts) ((ts)->tv_sec != 0 || (ts)->tv_nsec != 0)
+
+/* Some platforms don't have this define */
+#ifndef TIMESPEC_TO_TIMEVAL
+#define TIMESPEC_TO_TIMEVAL(tv, ts) \
+ do { \
+ (tv)->tv_sec = (ts)->tv_sec; \
+ (tv)->tv_usec = (ts)->tv_nsec / 1000; \
+ } while (0)
+#endif
+
+void usbi_log(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, ...);
+
+void usbi_log_v(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, va_list args);
+
+#if !defined(_MSC_VER) || _MSC_VER >= 1400
+
+#ifdef ENABLE_LOGGING
+#define _usbi_log(ctx, level, ...) usbi_log(ctx, level, __FUNCTION__, __VA_ARGS__)
+#define usbi_dbg(...) _usbi_log(NULL, LIBUSB_LOG_LEVEL_DEBUG, __VA_ARGS__)
+#else
+#define _usbi_log(ctx, level, ...) do { (void)(ctx); } while(0)
+#define usbi_dbg(...) do {} while(0)
+#endif
+
+#define usbi_info(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_INFO, __VA_ARGS__)
+#define usbi_warn(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_WARNING, __VA_ARGS__)
+#define usbi_err(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_ERROR, __VA_ARGS__)
+
+#else /* !defined(_MSC_VER) || _MSC_VER >= 1400 */
+
+#ifdef ENABLE_LOGGING
+#define LOG_BODY(ctxt, level) \
+{ \
+ va_list args; \
+ va_start (args, format); \
+ usbi_log_v(ctxt, level, "", format, args); \
+ va_end(args); \
+}
+#else
+#define LOG_BODY(ctxt, level) do { (void)(ctxt); } while(0)
+#endif
+
+static inline void usbi_info(struct libusb_context *ctx, const char *format,
+ ...)
+ LOG_BODY(ctx,LIBUSB_LOG_LEVEL_INFO)
+static inline void usbi_warn(struct libusb_context *ctx, const char *format,
+ ...)
+ LOG_BODY(ctx,LIBUSB_LOG_LEVEL_WARNING)
+static inline void usbi_err( struct libusb_context *ctx, const char *format,
+ ...)
+ LOG_BODY(ctx,LIBUSB_LOG_LEVEL_ERROR)
+
+static inline void usbi_dbg(const char *format, ...)
+ LOG_BODY(NULL,LIBUSB_LOG_LEVEL_DEBUG)
+
+#endif /* !defined(_MSC_VER) || _MSC_VER >= 1400 */
+
+#define USBI_GET_CONTEXT(ctx) if (!(ctx)) (ctx) = usbi_default_context
+#define DEVICE_CTX(dev) ((dev)->ctx)
+#define HANDLE_CTX(handle) (DEVICE_CTX((handle)->dev))
+#define TRANSFER_CTX(transfer) (HANDLE_CTX((transfer)->dev_handle))
+#define ITRANSFER_CTX(transfer) \
+ (TRANSFER_CTX(USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)))
+
+#define IS_EPIN(ep) (0 != ((ep) & LIBUSB_ENDPOINT_IN))
+#define IS_EPOUT(ep) (!IS_EPIN(ep))
+#define IS_XFERIN(xfer) (0 != ((xfer)->endpoint & LIBUSB_ENDPOINT_IN))
+#define IS_XFEROUT(xfer) (!IS_XFERIN(xfer))
+
+/* Internal abstraction for thread synchronization */
+#if defined(THREADS_POSIX)
+#include "os/threads_posix.h"
+#elif defined(OS_WINDOWS) || defined(OS_WINCE)
+#include <os/threads_windows.h>
+#endif
+
+extern struct libusb_context *usbi_default_context;
+
+/* Forward declaration for use in context (fully defined inside poll abstraction) */
+struct pollfd;
+
+struct libusb_context {
+ int debug;
+ int debug_fixed;
+
+ /* internal event pipe, used for signalling occurrence of an internal event. */
+ int event_pipe[2];
+
+ struct list_head usb_devs;
+ usbi_mutex_t usb_devs_lock;
+
+ /* A list of open handles. Backends are free to traverse this if required.
+ */
+ struct list_head open_devs;
+ usbi_mutex_t open_devs_lock;
+
+ /* A list of registered hotplug callbacks */
+ struct list_head hotplug_cbs;
+ usbi_mutex_t hotplug_cbs_lock;
+
+ /* this is a list of in-flight transfer handles, sorted by timeout
+ * expiration. URBs to timeout the soonest are placed at the beginning of
+ * the list, URBs that will time out later are placed after, and urbs with
+ * infinite timeout are always placed at the very end. */
+ struct list_head flying_transfers;
+ usbi_mutex_t flying_transfers_lock;
+
+ /* user callbacks for pollfd changes */
+ libusb_pollfd_added_cb fd_added_cb;
+ libusb_pollfd_removed_cb fd_removed_cb;
+ void *fd_cb_user_data;
+
+ /* ensures that only one thread is handling events at any one time */
+ usbi_mutex_t events_lock;
+
+ /* used to see if there is an active thread doing event handling */
+ int event_handler_active;
+
+ /* used to wait for event completion in threads other than the one that is
+ * event handling */
+ usbi_mutex_t event_waiters_lock;
+ usbi_cond_t event_waiters_cond;
+
+ /* A lock to protect internal context event data. */
+ usbi_mutex_t event_data_lock;
+
+ /* A counter that is set when we want to interrupt and prevent event handling,
+ * in order to safely close a device. Protected by event_data_lock. */
+ unsigned int device_close;
+
+ /* list and count of poll fds and an array of poll fd structures that is
+ * (re)allocated as necessary prior to polling, and a flag to indicate
+ * when the list of poll fds has changed since the last poll.
+ * Protected by event_data_lock. */
+ struct list_head ipollfds;
+ struct pollfd *pollfds;
+ POLL_NFDS_TYPE pollfds_cnt;
+ unsigned int pollfds_modified;
+
+ /* A list of pending hotplug messages. Protected by event_data_lock. */
+ struct list_head hotplug_msgs;
+
+ /* A list of pending completed transfers. Protected by event_data_lock. */
+ struct list_head completed_transfers;
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /* used for timeout handling, if supported by OS.
+ * this timerfd is maintained to trigger on the next pending timeout */
+ int timerfd;
+#endif
+
+ struct list_head list;
+};
+
+/* Update the following macro if new event sources are added */
+#define usbi_pending_events(ctx) \
+ ((ctx)->device_close || (ctx)->pollfds_modified \
+ || !list_empty(&(ctx)->hotplug_msgs) || !list_empty(&(ctx)->completed_transfers))
+
+#ifdef USBI_TIMERFD_AVAILABLE
+#define usbi_using_timerfd(ctx) ((ctx)->timerfd >= 0)
+#else
+#define usbi_using_timerfd(ctx) (0)
+#endif
+
+struct libusb_device {
+ /* lock protects refcnt, everything else is finalized at initialization
+ * time */
+ usbi_mutex_t lock;
+ int refcnt;
+
+ struct libusb_context *ctx;
+
+ uint8_t bus_number;
+ uint8_t port_number;
+ struct libusb_device* parent_dev;
+ uint8_t device_address;
+ uint8_t num_configurations;
+ enum libusb_speed speed;
+
+ struct list_head list;
+ unsigned long session_data;
+
+ struct libusb_device_descriptor device_descriptor;
+ int attached;
+
+ unsigned char os_priv
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+struct libusb_device_handle {
+ /* lock protects claimed_interfaces */
+ usbi_mutex_t lock;
+ unsigned long claimed_interfaces;
+
+ struct list_head list;
+ struct libusb_device *dev;
+ int auto_detach_kernel_driver;
+ unsigned char os_priv
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+enum {
+ USBI_CLOCK_MONOTONIC,
+ USBI_CLOCK_REALTIME
+};
+
+/* in-memory transfer layout:
+ *
+ * 1. struct usbi_transfer
+ * 2. struct libusb_transfer (which includes iso packets) [variable size]
+ * 3. os private data [variable size]
+ *
+ * from a libusb_transfer, you can get the usbi_transfer by rewinding the
+ * appropriate number of bytes.
+ * the usbi_transfer includes the number of allocated packets, so you can
+ * determine the size of the transfer and hence the start and length of the
+ * OS-private data.
+ */
+
+struct usbi_transfer {
+ int num_iso_packets;
+ struct list_head list;
+ struct list_head completed_list;
+ struct timeval timeout;
+ int transferred;
+ uint32_t stream_id;
+ uint8_t flags;
+
+ /* this lock is held during libusb_submit_transfer() and
+ * libusb_cancel_transfer() (allowing the OS backend to prevent duplicate
+ * cancellation, submission-during-cancellation, etc). the OS backend
+ * should also take this lock in the handle_events path, to prevent the user
+ * cancelling the transfer from another thread while you are processing
+ * its completion (presumably there would be races within your OS backend
+ * if this were possible). */
+ usbi_mutex_t lock;
+
+ /* this lock should be held whenever viewing or modifying flags
+ * relating to the transfer state */
+ usbi_mutex_t flags_lock;
+};
+
+enum usbi_transfer_flags {
+ /* The transfer has timed out */
+ USBI_TRANSFER_TIMED_OUT = 1 << 0,
+
+ /* Set by backend submit_transfer() if the OS handles timeout */
+ USBI_TRANSFER_OS_HANDLES_TIMEOUT = 1 << 1,
+
+ /* Cancellation was requested via libusb_cancel_transfer() */
+ USBI_TRANSFER_CANCELLING = 1 << 2,
+
+ /* Operation on the transfer failed because the device disappeared */
+ USBI_TRANSFER_DEVICE_DISAPPEARED = 1 << 3,
+
+ /* Transfer is currently being submitted */
+ USBI_TRANSFER_SUBMITTING = 1 << 4,
+
+ /* Transfer successfully submitted by backend */
+ USBI_TRANSFER_IN_FLIGHT = 1 << 5,
+
+ /* Completion handler has run */
+ USBI_TRANSFER_COMPLETED = 1 << 6,
+
+ /* The transfer timeout has been handled */
+ USBI_TRANSFER_TIMEOUT_HANDLED = 1 << 7,
+};
+
+#define USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer) \
+ ((struct libusb_transfer *)(((unsigned char *)(transfer)) \
+ + sizeof(struct usbi_transfer)))
+#define LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer) \
+ ((struct usbi_transfer *)(((unsigned char *)(transfer)) \
+ - sizeof(struct usbi_transfer)))
+
+static inline void *usbi_transfer_get_os_priv(struct usbi_transfer *transfer)
+{
+ return ((unsigned char *)transfer) + sizeof(struct usbi_transfer)
+ + sizeof(struct libusb_transfer)
+ + (transfer->num_iso_packets
+ * sizeof(struct libusb_iso_packet_descriptor));
+}
+
+/* bus structures */
+
+/* All standard descriptors have these 2 fields in common */
+struct usb_descriptor_header {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+};
+
+/* shared data and functions */
+
+int usbi_io_init(struct libusb_context *ctx);
+void usbi_io_exit(struct libusb_context *ctx);
+
+struct libusb_device *usbi_alloc_device(struct libusb_context *ctx,
+ unsigned long session_id);
+struct libusb_device *usbi_get_device_by_session_id(struct libusb_context *ctx,
+ unsigned long session_id);
+int usbi_sanitize_device(struct libusb_device *dev);
+void usbi_handle_disconnect(struct libusb_device_handle *handle);
+
+int usbi_handle_transfer_completion(struct usbi_transfer *itransfer,
+ enum libusb_transfer_status status);
+int usbi_handle_transfer_cancellation(struct usbi_transfer *transfer);
+void usbi_signal_transfer_completion(struct usbi_transfer *transfer);
+
+int usbi_parse_descriptor(const unsigned char *source, const char *descriptor,
+ void *dest, int host_endian);
+int usbi_device_cache_descriptor(libusb_device *dev);
+int usbi_get_config_index_by_value(struct libusb_device *dev,
+ uint8_t bConfigurationValue, int *idx);
+
+void usbi_connect_device (struct libusb_device *dev);
+void usbi_disconnect_device (struct libusb_device *dev);
+
+int usbi_signal_event(struct libusb_context *ctx);
+int usbi_clear_event(struct libusb_context *ctx);
+
+/* Internal abstraction for poll (needs struct usbi_transfer on Windows) */
+#if defined(OS_LINUX) || defined(OS_DARWIN) || defined(OS_OPENBSD) || defined(OS_NETBSD) || defined(OS_HAIKU)
+#include <unistd.h>
+#include "os/poll_posix.h"
+#elif defined(OS_WINDOWS) || defined(OS_WINCE)
+#include "os/poll_windows.h"
+#endif
+
+#if (defined(OS_WINDOWS) || defined(OS_WINCE)) && !defined(__GNUC__)
+#define snprintf _snprintf
+#define vsnprintf _vsnprintf
+int usbi_gettimeofday(struct timeval *tp, void *tzp);
+#define LIBUSB_GETTIMEOFDAY_WIN32
+#define HAVE_USBI_GETTIMEOFDAY
+#else
+#ifdef HAVE_GETTIMEOFDAY
+#define usbi_gettimeofday(tv, tz) gettimeofday((tv), (tz))
+#define HAVE_USBI_GETTIMEOFDAY
+#endif
+#endif
+
+struct usbi_pollfd {
+ /* must come first */
+ struct libusb_pollfd pollfd;
+
+ struct list_head list;
+};
+
+int usbi_add_pollfd(struct libusb_context *ctx, int fd, short events);
+void usbi_remove_pollfd(struct libusb_context *ctx, int fd);
+
+/* device discovery */
+
+/* we traverse usbfs without knowing how many devices we are going to find.
+ * so we create this discovered_devs model which is similar to a linked-list
+ * which grows when required. it can be freed once discovery has completed,
+ * eliminating the need for a list node in the libusb_device structure
+ * itself. */
+struct discovered_devs {
+ size_t len;
+ size_t capacity;
+ struct libusb_device *devices
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+struct discovered_devs *discovered_devs_append(
+ struct discovered_devs *discdevs, struct libusb_device *dev);
+
+/* OS abstraction */
+
+/* This is the interface that OS backends need to implement.
+ * All fields are mandatory, except ones explicitly noted as optional. */
+struct usbi_os_backend {
+ /* A human-readable name for your backend, e.g. "Linux usbfs" */
+ const char *name;
+
+ /* Binary mask for backend specific capabilities */
+ uint32_t caps;
+
+ /* Perform initialization of your backend. You might use this function
+ * to determine specific capabilities of the system, allocate required
+ * data structures for later, etc.
+ *
+ * This function is called when a libusb user initializes the library
+ * prior to use.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*init)(struct libusb_context *ctx);
+
+ /* Deinitialization. Optional. This function should destroy anything
+ * that was set up by init.
+ *
+ * This function is called when the user deinitializes the library.
+ */
+ void (*exit)(void);
+
+ /* Enumerate all the USB devices on the system, returning them in a list
+ * of discovered devices.
+ *
+ * Your implementation should enumerate all devices on the system,
+ * regardless of whether they have been seen before or not.
+ *
+ * When you have found a device, compute a session ID for it. The session
+ * ID should uniquely represent that particular device for that particular
+ * connection session since boot (i.e. if you disconnect and reconnect a
+ * device immediately after, it should be assigned a different session ID).
+ * If your OS cannot provide a unique session ID as described above,
+ * presenting a session ID of (bus_number << 8 | device_address) should
+ * be sufficient. Bus numbers and device addresses wrap and get reused,
+ * but that is an unlikely case.
+ *
+ * After computing a session ID for a device, call
+ * usbi_get_device_by_session_id(). This function checks if libusb already
+ * knows about the device, and if so, it provides you with a reference
+ * to a libusb_device structure for it.
+ *
+ * If usbi_get_device_by_session_id() returns NULL, it is time to allocate
+ * a new device structure for the device. Call usbi_alloc_device() to
+ * obtain a new libusb_device structure with reference count 1. Populate
+ * the bus_number and device_address attributes of the new device, and
+ * perform any other internal backend initialization you need to do. At
+ * this point, you should be ready to provide device descriptors and so
+ * on through the get_*_descriptor functions. Finally, call
+ * usbi_sanitize_device() to perform some final sanity checks on the
+ * device. Assuming all of the above succeeded, we can now continue.
+ * If any of the above failed, remember to unreference the device that
+ * was returned by usbi_alloc_device().
+ *
+ * At this stage we have a populated libusb_device structure (either one
+ * that was found earlier, or one that we have just allocated and
+ * populated). This can now be added to the discovered devices list
+ * using discovered_devs_append(). Note that discovered_devs_append()
+ * may reallocate the list, returning a new location for it, and also
+ * note that reallocation can fail. Your backend should handle these
+ * error conditions appropriately.
+ *
+ * This function should not generate any bus I/O and should not block.
+ * If I/O is required (e.g. reading the active configuration value), it is
+ * OK to ignore these suggestions :)
+ *
+ * This function is executed when the user wishes to retrieve a list
+ * of USB devices connected to the system.
+ *
+ * If the backend has hotplug support, this function is not used!
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_device_list)(struct libusb_context *ctx,
+ struct discovered_devs **discdevs);
+
+ /* Apps which were written before hotplug support, may listen for
+ * hotplug events on their own and call libusb_get_device_list on
+ * device addition. In this case libusb_get_device_list will likely
+ * return a list without the new device in there, as the hotplug
+ * event thread will still be busy enumerating the device, which may
+ * take a while, or may not even have seen the event yet.
+ *
+ * To avoid this libusb_get_device_list will call this optional
+ * function for backends with hotplug support before copying
+ * ctx->usb_devs to the user. In this function the backend should
+ * ensure any pending hotplug events are fully processed before
+ * returning.
+ *
+ * Optional, should be implemented by backends with hotplug support.
+ */
+ void (*hotplug_poll)(void);
+
+ /* Open a device for I/O and other USB operations. The device handle
+ * is preallocated for you, you can retrieve the device in question
+ * through handle->dev.
+ *
+ * Your backend should allocate any internal resources required for I/O
+ * and other operations so that those operations can happen (hopefully)
+ * without hiccup. This is also a good place to inform libusb that it
+ * should monitor certain file descriptors related to this device -
+ * see the usbi_add_pollfd() function.
+ *
+ * This function should not generate any bus I/O and should not block.
+ *
+ * This function is called when the user attempts to obtain a device
+ * handle for a device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_ACCESS if the user has insufficient permissions
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since
+ * discovery
+ * - another LIBUSB_ERROR code on other failure
+ *
+ * Do not worry about freeing the handle on failed open, the upper layers
+ * do this for you.
+ */
+ int (*open)(struct libusb_device_handle *handle);
+
+ /* Close a device such that the handle cannot be used again. Your backend
+ * should destroy any resources that were allocated in the open path.
+ * This may also be a good place to call usbi_remove_pollfd() to inform
+ * libusb of any file descriptors associated with this device that should
+ * no longer be monitored.
+ *
+ * This function is called when the user closes a device handle.
+ */
+ void (*close)(struct libusb_device_handle *handle);
+
+ /* Retrieve the device descriptor from a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration. Alternatively, you may be able
+ * to retrieve it from a kernel interface (some Linux setups can do this)
+ * still without generating bus I/O.
+ *
+ * This function is expected to write DEVICE_DESC_LENGTH (18) bytes into
+ * buffer, which is guaranteed to be big enough.
+ *
+ * This function is called when sanity-checking a device before adding
+ * it to the list of discovered devices, and also when the user requests
+ * to read the device descriptor.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return 0 on success or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_device_descriptor)(struct libusb_device *device,
+ unsigned char *buffer, int *host_endian);
+
+ /* Get the ACTIVE configuration descriptor for a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration. You may also have to keep track
+ * of which configuration is active when the user changes it.
+ *
+ * This function is expected to write len bytes of data into buffer, which
+ * is guaranteed to be big enough. If you can only do a partial write,
+ * return an error code.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the device is in unconfigured state
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*get_active_config_descriptor)(struct libusb_device *device,
+ unsigned char *buffer, size_t len, int *host_endian);
+
+ /* Get a specific configuration descriptor for a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration.
+ *
+ * The requested descriptor is expressed as a zero-based index (i.e. 0
+ * indicates that we are requesting the first descriptor). The index does
+ * not (necessarily) equal the bConfigurationValue of the configuration
+ * being requested.
+ *
+ * This function is expected to write len bytes of data into buffer, which
+ * is guaranteed to be big enough. If you can only do a partial write,
+ * return an error code.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return the length read on success or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_config_descriptor)(struct libusb_device *device,
+ uint8_t config_index, unsigned char *buffer, size_t len,
+ int *host_endian);
+
+ /* Like get_config_descriptor but then by bConfigurationValue instead
+ * of by index.
+ *
+ * Optional, if not present the core will call get_config_descriptor
+ * for all configs until it finds the desired bConfigurationValue.
+ *
+ * Returns a pointer to the raw-descriptor in *buffer, this memory
+ * is valid as long as device is valid.
+ *
+ * Returns the length of the returned raw-descriptor on success,
+ * or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_config_descriptor_by_value)(struct libusb_device *device,
+ uint8_t bConfigurationValue, unsigned char **buffer,
+ int *host_endian);
+
+ /* Get the bConfigurationValue for the active configuration for a device.
+ * Optional. This should only be implemented if you can retrieve it from
+ * cache (don't generate I/O).
+ *
+ * If you cannot retrieve this from cache, either do not implement this
+ * function, or return LIBUSB_ERROR_NOT_SUPPORTED. This will cause
+ * libusb to retrieve the information through a standard control transfer.
+ *
+ * This function must be non-blocking.
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - LIBUSB_ERROR_NOT_SUPPORTED if the value cannot be retrieved without
+ * blocking
+ * - another LIBUSB_ERROR code on other failure.
+ */
+ int (*get_configuration)(struct libusb_device_handle *handle, int *config);
+
+ /* Set the active configuration for a device.
+ *
+ * A configuration value of -1 should put the device in unconfigured state.
+ *
+ * This function can block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the configuration does not exist
+ * - LIBUSB_ERROR_BUSY if interfaces are currently claimed (and hence
+ * configuration cannot be changed)
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure.
+ */
+ int (*set_configuration)(struct libusb_device_handle *handle, int config);
+
+ /* Claim an interface. When claimed, the application can then perform
+ * I/O to an interface's endpoints.
+ *
+ * This function should not generate any bus I/O and should not block.
+ * Interface claiming is a logical operation that simply ensures that
+ * no other drivers/applications are using the interface, and after
+ * claiming, no other drivers/applications can use the interface because
+ * we now "own" it.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the interface does not exist
+ * - LIBUSB_ERROR_BUSY if the interface is in use by another driver/app
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*claim_interface)(struct libusb_device_handle *handle, int interface_number);
+
+ /* Release a previously claimed interface.
+ *
+ * This function should also generate a SET_INTERFACE control request,
+ * resetting the alternate setting of that interface to 0. It's OK for
+ * this function to block as a result.
+ *
+ * You will only ever be asked to release an interface which was
+ * successfully claimed earlier.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*release_interface)(struct libusb_device_handle *handle, int interface_number);
+
+ /* Set the alternate setting for an interface.
+ *
+ * You will only ever be asked to set the alternate setting for an
+ * interface which was successfully claimed earlier.
+ *
+ * It's OK for this function to block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the alternate setting does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*set_interface_altsetting)(struct libusb_device_handle *handle,
+ int interface_number, int altsetting);
+
+ /* Clear a halt/stall condition on an endpoint.
+ *
+ * It's OK for this function to block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*clear_halt)(struct libusb_device_handle *handle,
+ unsigned char endpoint);
+
+ /* Perform a USB port reset to reinitialize a device.
+ *
+ * If possible, the handle should still be usable after the reset
+ * completes, assuming that the device descriptors did not change during
+ * reset and all previous interface state can be restored.
+ *
+ * If something changes, or you cannot easily locate/verify the resetted
+ * device, return LIBUSB_ERROR_NOT_FOUND. This prompts the application
+ * to close the old handle and re-enumerate the device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if re-enumeration is required, or if the device
+ * has been disconnected since it was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*reset_device)(struct libusb_device_handle *handle);
+
+ /* Alloc num_streams usb3 bulk streams on the passed in endpoints */
+ int (*alloc_streams)(struct libusb_device_handle *handle,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints);
+
+ /* Free usb3 bulk streams allocated with alloc_streams */
+ int (*free_streams)(struct libusb_device_handle *handle,
+ unsigned char *endpoints, int num_endpoints);
+
+ /* Determine if a kernel driver is active on an interface. Optional.
+ *
+ * The presence of a kernel driver on an interface indicates that any
+ * calls to claim_interface would fail with the LIBUSB_ERROR_BUSY code.
+ *
+ * Return:
+ * - 0 if no driver is active
+ * - 1 if a driver is active
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*kernel_driver_active)(struct libusb_device_handle *handle,
+ int interface_number);
+
+ /* Detach a kernel driver from an interface. Optional.
+ *
+ * After detaching a kernel driver, the interface should be available
+ * for claim.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * - LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*detach_kernel_driver)(struct libusb_device_handle *handle,
+ int interface_number);
+
+ /* Attach a kernel driver to an interface. Optional.
+ *
+ * Reattach a kernel driver to the device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * - LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - LIBUSB_ERROR_BUSY if a program or driver has claimed the interface,
+ * preventing reattachment
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*attach_kernel_driver)(struct libusb_device_handle *handle,
+ int interface_number);
+
+ /* Destroy a device. Optional.
+ *
+ * This function is called when the last reference to a device is
+ * destroyed. It should free any resources allocated in the get_device_list
+ * path.
+ */
+ void (*destroy_device)(struct libusb_device *dev);
+
+ /* Submit a transfer. Your implementation should take the transfer,
+ * morph it into whatever form your platform requires, and submit it
+ * asynchronously.
+ *
+ * This function must not block.
+ *
+ * This function gets called with the flying_transfers_lock locked!
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*submit_transfer)(struct usbi_transfer *itransfer);
+
+ /* Cancel a previously submitted transfer.
+ *
+ * This function must not block. The transfer cancellation must complete
+ * later, resulting in a call to usbi_handle_transfer_cancellation()
+ * from the context of handle_events.
+ */
+ int (*cancel_transfer)(struct usbi_transfer *itransfer);
+
+ /* Clear a transfer as if it has completed or cancelled, but do not
+ * report any completion/cancellation to the library. You should free
+ * all private data from the transfer as if you were just about to report
+ * completion or cancellation.
+ *
+ * This function might seem a bit out of place. It is used when libusb
+ * detects a disconnected device - it calls this function for all pending
+ * transfers before reporting completion (with the disconnect code) to
+ * the user. Maybe we can improve upon this internal interface in future.
+ */
+ void (*clear_transfer_priv)(struct usbi_transfer *itransfer);
+
+ /* Handle any pending events on file descriptors. Optional.
+ *
+ * Provide this function when file descriptors directly indicate device
+ * or transfer activity. If your backend does not have such file descriptors,
+ * implement the handle_transfer_completion function below.
+ *
+ * This involves monitoring any active transfers and processing their
+ * completion or cancellation.
+ *
+ * The function is passed an array of pollfd structures (size nfds)
+ * as a result of the poll() system call. The num_ready parameter
+ * indicates the number of file descriptors that have reported events
+ * (i.e. the poll() return value). This should be enough information
+ * for you to determine which actions need to be taken on the currently
+ * active transfers.
+ *
+ * For any cancelled transfers, call usbi_handle_transfer_cancellation().
+ * For completed transfers, call usbi_handle_transfer_completion().
+ * For control/bulk/interrupt transfers, populate the "transferred"
+ * element of the appropriate usbi_transfer structure before calling the
+ * above functions. For isochronous transfers, populate the status and
+ * transferred fields of the iso packet descriptors of the transfer.
+ *
+ * This function should also be able to detect disconnection of the
+ * device, reporting that situation with usbi_handle_disconnect().
+ *
+ * When processing an event related to a transfer, you probably want to
+ * take usbi_transfer.lock to prevent races. See the documentation for
+ * the usbi_transfer structure.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*handle_events)(struct libusb_context *ctx,
+ struct pollfd *fds, POLL_NFDS_TYPE nfds, int num_ready);
+
+ /* Handle transfer completion. Optional.
+ *
+ * Provide this function when there are no file descriptors available
+ * that directly indicate device or transfer activity. If your backend does
+ * have such file descriptors, implement the handle_events function above.
+ *
+ * Your backend must tell the library when a transfer has completed by
+ * calling usbi_signal_transfer_completion(). You should store any private
+ * information about the transfer and its completion status in the transfer's
+ * private backend data.
+ *
+ * During event handling, this function will be called on each transfer for
+ * which usbi_signal_transfer_completion() was called.
+ *
+ * For any cancelled transfers, call usbi_handle_transfer_cancellation().
+ * For completed transfers, call usbi_handle_transfer_completion().
+ * For control/bulk/interrupt transfers, populate the "transferred"
+ * element of the appropriate usbi_transfer structure before calling the
+ * above functions. For isochronous transfers, populate the status and
+ * transferred fields of the iso packet descriptors of the transfer.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*handle_transfer_completion)(struct usbi_transfer *itransfer);
+
+ /* Get time from specified clock. At least two clocks must be implemented
+ by the backend: USBI_CLOCK_REALTIME, and USBI_CLOCK_MONOTONIC.
+
+ Description of clocks:
+ USBI_CLOCK_REALTIME : clock returns time since system epoch.
+ USBI_CLOCK_MONOTONIC: clock returns time since unspecified start
+ time (usually boot).
+ */
+ int (*clock_gettime)(int clkid, struct timespec *tp);
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /* clock ID of the clock that should be used for timerfd */
+ clockid_t (*get_timerfd_clockid)(void);
+#endif
+
+ /* Number of bytes to reserve for per-device private backend data.
+ * This private data area is accessible through the "os_priv" field of
+ * struct libusb_device. */
+ size_t device_priv_size;
+
+ /* Number of bytes to reserve for per-handle private backend data.
+ * This private data area is accessible through the "os_priv" field of
+ * struct libusb_device. */
+ size_t device_handle_priv_size;
+
+ /* Number of bytes to reserve for per-transfer private backend data.
+ * This private data area is accessible by calling
+ * usbi_transfer_get_os_priv() on the appropriate usbi_transfer instance.
+ */
+ size_t transfer_priv_size;
+};
+
+extern const struct usbi_os_backend * const usbi_backend;
+
+extern const struct usbi_os_backend linux_usbfs_backend;
+extern const struct usbi_os_backend darwin_backend;
+extern const struct usbi_os_backend openbsd_backend;
+extern const struct usbi_os_backend netbsd_backend;
+extern const struct usbi_os_backend windows_backend;
+extern const struct usbi_os_backend wince_backend;
+extern const struct usbi_os_backend haiku_usb_raw_backend;
+
+extern struct list_head active_contexts_list;
+extern usbi_mutex_static_t active_contexts_lock;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/* -*- Mode: C; indent-tabs-mode:nil -*- */
+/*
+ * darwin backend for libusb 1.0
+ * Copyright © 2008-2014 Nathan Hjelm <hjelmn@users.sourceforge.net>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "config.h"
+#include <ctype.h>
+#include <errno.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <libkern/OSAtomic.h>
+
+#include <mach/clock.h>
+#include <mach/clock_types.h>
+#include <mach/mach_host.h>
+#include <mach/mach_port.h>
+
+#include <AvailabilityMacros.h>
+#if MAC_OS_X_VERSION_MIN_REQUIRED >= 1060
+ #include <objc/objc-auto.h>
+#endif
+
+#include "darwin_usb.h"
+
+/* async event thread */
+static pthread_mutex_t libusb_darwin_at_mutex = PTHREAD_MUTEX_INITIALIZER;
+static pthread_cond_t libusb_darwin_at_cond = PTHREAD_COND_INITIALIZER;
+
+static clock_serv_t clock_realtime;
+static clock_serv_t clock_monotonic;
+
+static CFRunLoopRef libusb_darwin_acfl = NULL; /* event cf loop */
+static volatile int32_t initCount = 0;
+
+static usbi_mutex_t darwin_cached_devices_lock = PTHREAD_MUTEX_INITIALIZER;
+static struct list_head darwin_cached_devices = {&darwin_cached_devices, &darwin_cached_devices};
+
+#define DARWIN_CACHED_DEVICE(a) ((struct darwin_cached_device *) (((struct darwin_device_priv *)((a)->os_priv))->dev))
+
+/* async event thread */
+static pthread_t libusb_darwin_at;
+
+static int darwin_get_config_descriptor(struct libusb_device *dev, uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian);
+static int darwin_claim_interface(struct libusb_device_handle *dev_handle, int iface);
+static int darwin_release_interface(struct libusb_device_handle *dev_handle, int iface);
+static int darwin_reset_device(struct libusb_device_handle *dev_handle);
+static void darwin_async_io_callback (void *refcon, IOReturn result, void *arg0);
+
+static int darwin_scan_devices(struct libusb_context *ctx);
+static int process_new_device (struct libusb_context *ctx, io_service_t service);
+
+#if defined(ENABLE_LOGGING)
+static const char *darwin_error_str (int result) {
+ static char string_buffer[50];
+ switch (result) {
+ case kIOReturnSuccess:
+ return "no error";
+ case kIOReturnNotOpen:
+ return "device not opened for exclusive access";
+ case kIOReturnNoDevice:
+ return "no connection to an IOService";
+ case kIOUSBNoAsyncPortErr:
+ return "no async port has been opened for interface";
+ case kIOReturnExclusiveAccess:
+ return "another process has device opened for exclusive access";
+ case kIOUSBPipeStalled:
+ return "pipe is stalled";
+ case kIOReturnError:
+ return "could not establish a connection to the Darwin kernel";
+ case kIOUSBTransactionTimeout:
+ return "transaction timed out";
+ case kIOReturnBadArgument:
+ return "invalid argument";
+ case kIOReturnAborted:
+ return "transaction aborted";
+ case kIOReturnNotResponding:
+ return "device not responding";
+ case kIOReturnOverrun:
+ return "data overrun";
+ case kIOReturnCannotWire:
+ return "physical memory can not be wired down";
+ case kIOReturnNoResources:
+ return "out of resources";
+ case kIOUSBHighSpeedSplitError:
+ return "high speed split error";
+ default:
+ snprintf(string_buffer, sizeof(string_buffer), "unknown error (0x%x)", result);
+ return string_buffer;
+ }
+}
+#endif
+
+static int darwin_to_libusb (int result) {
+ switch (result) {
+ case kIOReturnUnderrun:
+ case kIOReturnSuccess:
+ return LIBUSB_SUCCESS;
+ case kIOReturnNotOpen:
+ case kIOReturnNoDevice:
+ return LIBUSB_ERROR_NO_DEVICE;
+ case kIOReturnExclusiveAccess:
+ return LIBUSB_ERROR_ACCESS;
+ case kIOUSBPipeStalled:
+ return LIBUSB_ERROR_PIPE;
+ case kIOReturnBadArgument:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case kIOUSBTransactionTimeout:
+ return LIBUSB_ERROR_TIMEOUT;
+ case kIOReturnNotResponding:
+ case kIOReturnAborted:
+ case kIOReturnError:
+ case kIOUSBNoAsyncPortErr:
+ default:
+ return LIBUSB_ERROR_OTHER;
+ }
+}
+
+/* this function must be called with the darwin_cached_devices_lock held */
+static void darwin_deref_cached_device(struct darwin_cached_device *cached_dev) {
+ cached_dev->refcount--;
+ /* free the device and remove it from the cache */
+ if (0 == cached_dev->refcount) {
+ list_del(&cached_dev->list);
+
+ (*(cached_dev->device))->Release(cached_dev->device);
+ free (cached_dev);
+ }
+}
+
+static void darwin_ref_cached_device(struct darwin_cached_device *cached_dev) {
+ cached_dev->refcount++;
+}
+
+static int ep_to_pipeRef(struct libusb_device_handle *dev_handle, uint8_t ep, uint8_t *pipep, uint8_t *ifcp, struct darwin_interface **interface_out) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+
+ /* current interface */
+ struct darwin_interface *cInterface;
+
+ int8_t i, iface;
+
+ usbi_dbg ("converting ep address 0x%02x to pipeRef and interface", ep);
+
+ for (iface = 0 ; iface < USB_MAXINTERFACES ; iface++) {
+ cInterface = &priv->interfaces[iface];
+
+ if (dev_handle->claimed_interfaces & (1 << iface)) {
+ for (i = 0 ; i < cInterface->num_endpoints ; i++) {
+ if (cInterface->endpoint_addrs[i] == ep) {
+ *pipep = i + 1;
+
+ if (ifcp)
+ *ifcp = iface;
+
+ if (interface_out)
+ *interface_out = cInterface;
+
+ usbi_dbg ("pipe %d on interface %d matches", *pipep, iface);
+ return 0;
+ }
+ }
+ }
+ }
+
+ /* No pipe found with the correct endpoint address */
+ usbi_warn (HANDLE_CTX(dev_handle), "no pipeRef found with endpoint address 0x%02x.", ep);
+
+ return LIBUSB_ERROR_NOT_FOUND;
+}
+
+static int usb_setup_device_iterator (io_iterator_t *deviceIterator, UInt32 location) {
+ CFMutableDictionaryRef matchingDict = IOServiceMatching(kIOUSBDeviceClassName);
+
+ if (!matchingDict)
+ return kIOReturnError;
+
+ if (location) {
+ CFMutableDictionaryRef propertyMatchDict = CFDictionaryCreateMutable(kCFAllocatorDefault, 0,
+ &kCFTypeDictionaryKeyCallBacks,
+ &kCFTypeDictionaryValueCallBacks);
+
+ if (propertyMatchDict) {
+ /* there are no unsigned CFNumber types so treat the value as signed. the os seems to do this
+ internally (CFNumberType of locationID is 3) */
+ CFTypeRef locationCF = CFNumberCreate (NULL, kCFNumberSInt32Type, &location);
+
+ CFDictionarySetValue (propertyMatchDict, CFSTR(kUSBDevicePropertyLocationID), locationCF);
+ /* release our reference to the CFNumber (CFDictionarySetValue retains it) */
+ CFRelease (locationCF);
+
+ CFDictionarySetValue (matchingDict, CFSTR(kIOPropertyMatchKey), propertyMatchDict);
+ /* release out reference to the CFMutableDictionaryRef (CFDictionarySetValue retains it) */
+ CFRelease (propertyMatchDict);
+ }
+ /* else we can still proceed as long as the caller accounts for the possibility of other devices in the iterator */
+ }
+
+ return IOServiceGetMatchingServices(kIOMasterPortDefault, matchingDict, deviceIterator);
+}
+
+/* Returns 1 on success, 0 on failure. */
+static int get_ioregistry_value_number (io_service_t service, CFStringRef property, CFNumberType type, void *p) {
+ CFTypeRef cfNumber = IORegistryEntryCreateCFProperty (service, property, kCFAllocatorDefault, 0);
+ int ret = 0;
+
+ if (cfNumber) {
+ if (CFGetTypeID(cfNumber) == CFNumberGetTypeID()) {
+ ret = CFNumberGetValue(cfNumber, type, p);
+ }
+
+ CFRelease (cfNumber);
+ }
+
+ return ret;
+}
+
+static usb_device_t **darwin_device_from_service (io_service_t service)
+{
+ io_cf_plugin_ref_t *plugInInterface = NULL;
+ usb_device_t **device;
+ kern_return_t result;
+ SInt32 score;
+
+ result = IOCreatePlugInInterfaceForService(service, kIOUSBDeviceUserClientTypeID,
+ kIOCFPlugInInterfaceID, &plugInInterface,
+ &score);
+
+ if (kIOReturnSuccess != result || !plugInInterface) {
+ usbi_dbg ("could not set up plugin for service: %s", darwin_error_str (result));
+ return NULL;
+ }
+
+ (void)(*plugInInterface)->QueryInterface(plugInInterface, CFUUIDGetUUIDBytes(DeviceInterfaceID),
+ (LPVOID)&device);
+ /* Use release instead of IODestroyPlugInInterface to avoid stopping IOServices associated with this device */
+ (*plugInInterface)->Release (plugInInterface);
+
+ return device;
+}
+
+static void darwin_devices_attached (void *ptr, io_iterator_t add_devices) {
+ struct libusb_context *ctx;
+ io_service_t service;
+
+ usbi_mutex_lock(&active_contexts_lock);
+
+ while ((service = IOIteratorNext(add_devices))) {
+ /* add this device to each active context's device list */
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+ process_new_device (ctx, service);;
+ }
+
+ IOObjectRelease(service);
+ }
+
+ usbi_mutex_unlock(&active_contexts_lock);
+}
+
+static void darwin_devices_detached (void *ptr, io_iterator_t rem_devices) {
+ struct libusb_device *dev = NULL;
+ struct libusb_context *ctx;
+ struct darwin_cached_device *old_device;
+
+ io_service_t device;
+ UInt64 session;
+ int ret;
+
+ usbi_mutex_lock(&active_contexts_lock);
+
+ while ((device = IOIteratorNext (rem_devices)) != 0) {
+ /* get the location from the i/o registry */
+ ret = get_ioregistry_value_number (device, CFSTR("sessionID"), kCFNumberSInt64Type, &session);
+ IOObjectRelease (device);
+ if (!ret)
+ continue;
+
+ /* we need to match darwin_ref_cached_device call made in darwin_get_cached_device function
+ otherwise no cached device will ever get freed */
+ usbi_mutex_lock(&darwin_cached_devices_lock);
+ list_for_each_entry(old_device, &darwin_cached_devices, list, struct darwin_cached_device) {
+ if (old_device->session == session) {
+ darwin_deref_cached_device (old_device);
+ break;
+ }
+ }
+ usbi_mutex_unlock(&darwin_cached_devices_lock);
+
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+ usbi_dbg ("notifying context %p of device disconnect", ctx);
+
+ dev = usbi_get_device_by_session_id(ctx, (unsigned long) session);
+ if (dev) {
+ /* signal the core that this device has been disconnected. the core will tear down this device
+ when the reference count reaches 0 */
+ usbi_disconnect_device(dev);
+ libusb_unref_device(dev);
+ }
+ }
+ }
+
+ usbi_mutex_unlock(&active_contexts_lock);
+}
+
+static void darwin_hotplug_poll (void)
+{
+ /* not sure if 5 seconds will be too long/short but it should work ok */
+ mach_timespec_t timeout = {.tv_sec = 5, .tv_nsec = 0};
+
+ /* since a kernel thread may nodify the IOInterators used for
+ * hotplug notidication we can't just clear the iterators.
+ * instead just wait until all IOService providers are quiet */
+ (void) IOKitWaitQuiet (kIOMasterPortDefault, &timeout);
+}
+
+static void darwin_clear_iterator (io_iterator_t iter) {
+ io_service_t device;
+
+ while ((device = IOIteratorNext (iter)) != 0)
+ IOObjectRelease (device);
+}
+
+static void *darwin_event_thread_main (void *arg0) {
+ IOReturn kresult;
+ struct libusb_context *ctx = (struct libusb_context *)arg0;
+ CFRunLoopRef runloop;
+
+ /* Set this thread's name, so it can be seen in the debugger
+ and crash reports. */
+#if MAC_OS_X_VERSION_MIN_REQUIRED >= 1060
+ pthread_setname_np ("org.libusb.device-hotplug");
+
+ /* Tell the Objective-C garbage collector about this thread.
+ This is required because, unlike NSThreads, pthreads are
+ not automatically registered. Although we don't use
+ Objective-C, we use CoreFoundation, which does. */
+ objc_registerThreadWithCollector();
+#endif
+
+ /* hotplug (device arrival/removal) sources */
+ CFRunLoopSourceRef libusb_notification_cfsource;
+ io_notification_port_t libusb_notification_port;
+ io_iterator_t libusb_rem_device_iterator;
+ io_iterator_t libusb_add_device_iterator;
+
+ usbi_dbg ("creating hotplug event source");
+
+ runloop = CFRunLoopGetCurrent ();
+ CFRetain (runloop);
+
+ /* add the notification port to the run loop */
+ libusb_notification_port = IONotificationPortCreate (kIOMasterPortDefault);
+ libusb_notification_cfsource = IONotificationPortGetRunLoopSource (libusb_notification_port);
+ CFRunLoopAddSource(runloop, libusb_notification_cfsource, kCFRunLoopDefaultMode);
+
+ /* create notifications for removed devices */
+ kresult = IOServiceAddMatchingNotification (libusb_notification_port, kIOTerminatedNotification,
+ IOServiceMatching(kIOUSBDeviceClassName),
+ darwin_devices_detached,
+ ctx, &libusb_rem_device_iterator);
+
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (ctx, "could not add hotplug event source: %s", darwin_error_str (kresult));
+
+ pthread_exit (NULL);
+ }
+
+ /* create notifications for attached devices */
+ kresult = IOServiceAddMatchingNotification(libusb_notification_port, kIOFirstMatchNotification,
+ IOServiceMatching(kIOUSBDeviceClassName),
+ darwin_devices_attached,
+ ctx, &libusb_add_device_iterator);
+
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (ctx, "could not add hotplug event source: %s", darwin_error_str (kresult));
+
+ pthread_exit (NULL);
+ }
+
+ /* arm notifiers */
+ darwin_clear_iterator (libusb_rem_device_iterator);
+ darwin_clear_iterator (libusb_add_device_iterator);
+
+ usbi_dbg ("darwin event thread ready to receive events");
+
+ /* signal the main thread that the hotplug runloop has been created. */
+ pthread_mutex_lock (&libusb_darwin_at_mutex);
+ libusb_darwin_acfl = runloop;
+ pthread_cond_signal (&libusb_darwin_at_cond);
+ pthread_mutex_unlock (&libusb_darwin_at_mutex);
+
+ /* run the runloop */
+ CFRunLoopRun();
+
+ usbi_dbg ("darwin event thread exiting");
+
+ /* remove the notification cfsource */
+ CFRunLoopRemoveSource(runloop, libusb_notification_cfsource, kCFRunLoopDefaultMode);
+
+ /* delete notification port */
+ IONotificationPortDestroy (libusb_notification_port);
+
+ /* delete iterators */
+ IOObjectRelease (libusb_rem_device_iterator);
+ IOObjectRelease (libusb_add_device_iterator);
+
+ CFRelease (runloop);
+
+ libusb_darwin_acfl = NULL;
+
+ pthread_exit (NULL);
+}
+
+/* cleanup function to destroy cached devices */
+static void __attribute__((destructor)) _darwin_finalize(void) {
+ struct darwin_cached_device *dev, *next;
+
+ usbi_mutex_lock(&darwin_cached_devices_lock);
+ list_for_each_entry_safe(dev, next, &darwin_cached_devices, list, struct darwin_cached_device) {
+ darwin_deref_cached_device(dev);
+ }
+ usbi_mutex_unlock(&darwin_cached_devices_lock);
+}
+
+static int darwin_init(struct libusb_context *ctx) {
+ host_name_port_t host_self;
+ int rc;
+
+ rc = darwin_scan_devices (ctx);
+ if (LIBUSB_SUCCESS != rc) {
+ return rc;
+ }
+
+ if (OSAtomicIncrement32Barrier(&initCount) == 1) {
+ /* create the clocks that will be used */
+
+ host_self = mach_host_self();
+ host_get_clock_service(host_self, CALENDAR_CLOCK, &clock_realtime);
+ host_get_clock_service(host_self, SYSTEM_CLOCK, &clock_monotonic);
+ mach_port_deallocate(mach_task_self(), host_self);
+
+ pthread_create (&libusb_darwin_at, NULL, darwin_event_thread_main, ctx);
+
+ pthread_mutex_lock (&libusb_darwin_at_mutex);
+ while (!libusb_darwin_acfl)
+ pthread_cond_wait (&libusb_darwin_at_cond, &libusb_darwin_at_mutex);
+ pthread_mutex_unlock (&libusb_darwin_at_mutex);
+ }
+
+ return rc;
+}
+
+static void darwin_exit (void) {
+ if (OSAtomicDecrement32Barrier(&initCount) == 0) {
+ mach_port_deallocate(mach_task_self(), clock_realtime);
+ mach_port_deallocate(mach_task_self(), clock_monotonic);
+
+ /* stop the event runloop and wait for the thread to terminate. */
+ CFRunLoopStop (libusb_darwin_acfl);
+ pthread_join (libusb_darwin_at, NULL);
+ }
+}
+
+static int darwin_get_device_descriptor(struct libusb_device *dev, unsigned char *buffer, int *host_endian) {
+ struct darwin_cached_device *priv = DARWIN_CACHED_DEVICE(dev);
+
+ /* return cached copy */
+ memmove (buffer, &(priv->dev_descriptor), DEVICE_DESC_LENGTH);
+
+ *host_endian = 0;
+
+ return 0;
+}
+
+static int get_configuration_index (struct libusb_device *dev, int config_value) {
+ struct darwin_cached_device *priv = DARWIN_CACHED_DEVICE(dev);
+ UInt8 i, numConfig;
+ IOUSBConfigurationDescriptorPtr desc;
+ IOReturn kresult;
+
+ /* is there a simpler way to determine the index? */
+ kresult = (*(priv->device))->GetNumberOfConfigurations (priv->device, &numConfig);
+ if (kresult != kIOReturnSuccess)
+ return darwin_to_libusb (kresult);
+
+ for (i = 0 ; i < numConfig ; i++) {
+ (*(priv->device))->GetConfigurationDescriptorPtr (priv->device, i, &desc);
+
+ if (desc->bConfigurationValue == config_value)
+ return i;
+ }
+
+ /* configuration not found */
+ return LIBUSB_ERROR_NOT_FOUND;
+}
+
+static int darwin_get_active_config_descriptor(struct libusb_device *dev, unsigned char *buffer, size_t len, int *host_endian) {
+ struct darwin_cached_device *priv = DARWIN_CACHED_DEVICE(dev);
+ int config_index;
+
+ if (0 == priv->active_config)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ config_index = get_configuration_index (dev, priv->active_config);
+ if (config_index < 0)
+ return config_index;
+
+ return darwin_get_config_descriptor (dev, config_index, buffer, len, host_endian);
+}
+
+static int darwin_get_config_descriptor(struct libusb_device *dev, uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian) {
+ struct darwin_cached_device *priv = DARWIN_CACHED_DEVICE(dev);
+ IOUSBConfigurationDescriptorPtr desc;
+ IOReturn kresult;
+ int ret;
+
+ if (!priv || !priv->device)
+ return LIBUSB_ERROR_OTHER;
+
+ kresult = (*priv->device)->GetConfigurationDescriptorPtr (priv->device, config_index, &desc);
+ if (kresult == kIOReturnSuccess) {
+ /* copy descriptor */
+ if (libusb_le16_to_cpu(desc->wTotalLength) < len)
+ len = libusb_le16_to_cpu(desc->wTotalLength);
+
+ memmove (buffer, desc, len);
+
+ /* GetConfigurationDescriptorPtr returns the descriptor in USB bus order */
+ *host_endian = 0;
+ }
+
+ ret = darwin_to_libusb (kresult);
+ if (ret != LIBUSB_SUCCESS)
+ return ret;
+
+ return (int) len;
+}
+
+/* check whether the os has configured the device */
+static int darwin_check_configuration (struct libusb_context *ctx, struct darwin_cached_device *dev) {
+ usb_device_t **darwin_device = dev->device;
+
+ IOUSBConfigurationDescriptorPtr configDesc;
+ IOUSBFindInterfaceRequest request;
+ kern_return_t kresult;
+ io_iterator_t interface_iterator;
+ io_service_t firstInterface;
+
+ if (dev->dev_descriptor.bNumConfigurations < 1) {
+ usbi_err (ctx, "device has no configurations");
+ return LIBUSB_ERROR_OTHER; /* no configurations at this speed so we can't use it */
+ }
+
+ /* find the first configuration */
+ kresult = (*darwin_device)->GetConfigurationDescriptorPtr (darwin_device, 0, &configDesc);
+ dev->first_config = (kIOReturnSuccess == kresult) ? configDesc->bConfigurationValue : 1;
+
+ /* check if the device is already configured. there is probably a better way than iterating over the
+ to accomplish this (the trick is we need to avoid a call to GetConfigurations since buggy devices
+ might lock up on the device request) */
+
+ /* Setup the Interface Request */
+ request.bInterfaceClass = kIOUSBFindInterfaceDontCare;
+ request.bInterfaceSubClass = kIOUSBFindInterfaceDontCare;
+ request.bInterfaceProtocol = kIOUSBFindInterfaceDontCare;
+ request.bAlternateSetting = kIOUSBFindInterfaceDontCare;
+
+ kresult = (*(darwin_device))->CreateInterfaceIterator(darwin_device, &request, &interface_iterator);
+ if (kresult)
+ return darwin_to_libusb (kresult);
+
+ /* iterate once */
+ firstInterface = IOIteratorNext(interface_iterator);
+
+ /* done with the interface iterator */
+ IOObjectRelease(interface_iterator);
+
+ if (firstInterface) {
+ IOObjectRelease (firstInterface);
+
+ /* device is configured */
+ if (dev->dev_descriptor.bNumConfigurations == 1)
+ /* to avoid problems with some devices get the configurations value from the configuration descriptor */
+ dev->active_config = dev->first_config;
+ else
+ /* devices with more than one configuration should work with GetConfiguration */
+ (*darwin_device)->GetConfiguration (darwin_device, &dev->active_config);
+ } else
+ /* not configured */
+ dev->active_config = 0;
+
+ usbi_dbg ("active config: %u, first config: %u", dev->active_config, dev->first_config);
+
+ return 0;
+}
+
+static int darwin_request_descriptor (usb_device_t **device, UInt8 desc, UInt8 desc_index, void *buffer, size_t buffer_size) {
+ IOUSBDevRequestTO req;
+
+ memset (buffer, 0, buffer_size);
+
+ /* Set up request for descriptor/ */
+ req.bmRequestType = USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice);
+ req.bRequest = kUSBRqGetDescriptor;
+ req.wValue = desc << 8;
+ req.wIndex = desc_index;
+ req.wLength = buffer_size;
+ req.pData = buffer;
+ req.noDataTimeout = 20;
+ req.completionTimeout = 100;
+
+ return (*device)->DeviceRequestTO (device, &req);
+}
+
+static int darwin_cache_device_descriptor (struct libusb_context *ctx, struct darwin_cached_device *dev) {
+ usb_device_t **device = dev->device;
+ int retries = 1, delay = 30000;
+ int unsuspended = 0, try_unsuspend = 1, try_reconfigure = 1;
+ int is_open = 0;
+ int ret = 0, ret2;
+ UInt8 bDeviceClass;
+ UInt16 idProduct, idVendor;
+
+ dev->can_enumerate = 0;
+
+ (*device)->GetDeviceClass (device, &bDeviceClass);
+ (*device)->GetDeviceProduct (device, &idProduct);
+ (*device)->GetDeviceVendor (device, &idVendor);
+
+ /* According to Apple's documentation the device must be open for DeviceRequest but we may not be able to open some
+ * devices and Apple's USB Prober doesn't bother to open the device before issuing a descriptor request. Still,
+ * to follow the spec as closely as possible, try opening the device */
+ is_open = ((*device)->USBDeviceOpenSeize(device) == kIOReturnSuccess);
+
+ do {
+ /**** retrieve device descriptor ****/
+ ret = darwin_request_descriptor (device, kUSBDeviceDesc, 0, &dev->dev_descriptor, sizeof(dev->dev_descriptor));
+
+ if (kIOReturnOverrun == ret && kUSBDeviceDesc == dev->dev_descriptor.bDescriptorType)
+ /* received an overrun error but we still received a device descriptor */
+ ret = kIOReturnSuccess;
+
+ if (kIOUSBVendorIDAppleComputer == idVendor) {
+ /* NTH: don't bother retrying or unsuspending Apple devices */
+ break;
+ }
+
+ if (kIOReturnSuccess == ret && (0 == dev->dev_descriptor.bNumConfigurations ||
+ 0 == dev->dev_descriptor.bcdUSB)) {
+ /* work around for incorrectly configured devices */
+ if (try_reconfigure && is_open) {
+ usbi_dbg("descriptor appears to be invalid. resetting configuration before trying again...");
+
+ /* set the first configuration */
+ (*device)->SetConfiguration(device, 1);
+
+ /* don't try to reconfigure again */
+ try_reconfigure = 0;
+ }
+
+ ret = kIOUSBPipeStalled;
+ }
+
+ if (kIOReturnSuccess != ret && is_open && try_unsuspend) {
+ /* device may be suspended. unsuspend it and try again */
+#if DeviceVersion >= 320
+ UInt32 info = 0;
+
+ /* IOUSBFamily 320+ provides a way to detect device suspension but earlier versions do not */
+ (void)(*device)->GetUSBDeviceInformation (device, &info);
+
+ /* note that the device was suspended */
+ if (info & (1 << kUSBInformationDeviceIsSuspendedBit) || 0 == info)
+ try_unsuspend = 1;
+#endif
+
+ if (try_unsuspend) {
+ /* try to unsuspend the device */
+ ret2 = (*device)->USBDeviceSuspend (device, 0);
+ if (kIOReturnSuccess != ret2) {
+ /* prevent log spew from poorly behaving devices. this indicates the
+ os actually had trouble communicating with the device */
+ usbi_dbg("could not retrieve device descriptor. failed to unsuspend: %s",darwin_error_str(ret2));
+ } else
+ unsuspended = 1;
+
+ try_unsuspend = 0;
+ }
+ }
+
+ if (kIOReturnSuccess != ret) {
+ usbi_dbg("kernel responded with code: 0x%08x. sleeping for %d ms before trying again", ret, delay/1000);
+ /* sleep for a little while before trying again */
+ usleep (delay);
+ }
+ } while (kIOReturnSuccess != ret && retries--);
+
+ if (unsuspended)
+ /* resuspend the device */
+ (void)(*device)->USBDeviceSuspend (device, 1);
+
+ if (is_open)
+ (void) (*device)->USBDeviceClose (device);
+
+ if (ret != kIOReturnSuccess) {
+ /* a debug message was already printed out for this error */
+ if (LIBUSB_CLASS_HUB == bDeviceClass)
+ usbi_dbg ("could not retrieve device descriptor %.4x:%.4x: %s (%x). skipping device",
+ idVendor, idProduct, darwin_error_str (ret), ret);
+ else
+ usbi_warn (ctx, "could not retrieve device descriptor %.4x:%.4x: %s (%x). skipping device",
+ idVendor, idProduct, darwin_error_str (ret), ret);
+ return darwin_to_libusb (ret);
+ }
+
+ /* catch buggy hubs (which appear to be virtual). Apple's own USB prober has problems with these devices. */
+ if (libusb_le16_to_cpu (dev->dev_descriptor.idProduct) != idProduct) {
+ /* not a valid device */
+ usbi_warn (ctx, "idProduct from iokit (%04x) does not match idProduct in descriptor (%04x). skipping device",
+ idProduct, libusb_le16_to_cpu (dev->dev_descriptor.idProduct));
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ usbi_dbg ("cached device descriptor:");
+ usbi_dbg (" bDescriptorType: 0x%02x", dev->dev_descriptor.bDescriptorType);
+ usbi_dbg (" bcdUSB: 0x%04x", dev->dev_descriptor.bcdUSB);
+ usbi_dbg (" bDeviceClass: 0x%02x", dev->dev_descriptor.bDeviceClass);
+ usbi_dbg (" bDeviceSubClass: 0x%02x", dev->dev_descriptor.bDeviceSubClass);
+ usbi_dbg (" bDeviceProtocol: 0x%02x", dev->dev_descriptor.bDeviceProtocol);
+ usbi_dbg (" bMaxPacketSize0: 0x%02x", dev->dev_descriptor.bMaxPacketSize0);
+ usbi_dbg (" idVendor: 0x%04x", dev->dev_descriptor.idVendor);
+ usbi_dbg (" idProduct: 0x%04x", dev->dev_descriptor.idProduct);
+ usbi_dbg (" bcdDevice: 0x%04x", dev->dev_descriptor.bcdDevice);
+ usbi_dbg (" iManufacturer: 0x%02x", dev->dev_descriptor.iManufacturer);
+ usbi_dbg (" iProduct: 0x%02x", dev->dev_descriptor.iProduct);
+ usbi_dbg (" iSerialNumber: 0x%02x", dev->dev_descriptor.iSerialNumber);
+ usbi_dbg (" bNumConfigurations: 0x%02x", dev->dev_descriptor.bNumConfigurations);
+
+ dev->can_enumerate = 1;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int darwin_get_cached_device(struct libusb_context *ctx, io_service_t service,
+ struct darwin_cached_device **cached_out) {
+ struct darwin_cached_device *new_device;
+ UInt64 sessionID = 0, parent_sessionID = 0;
+ int ret = LIBUSB_SUCCESS;
+ usb_device_t **device;
+ io_service_t parent;
+ kern_return_t result;
+ UInt8 port = 0;
+
+ /* get some info from the io registry */
+ (void) get_ioregistry_value_number (service, CFSTR("sessionID"), kCFNumberSInt64Type, &sessionID);
+ (void) get_ioregistry_value_number (service, CFSTR("PortNum"), kCFNumberSInt8Type, &port);
+
+ usbi_dbg("finding cached device for sessionID 0x%" PRIx64, sessionID);
+
+ result = IORegistryEntryGetParentEntry (service, kIOUSBPlane, &parent);
+
+ if (kIOReturnSuccess == result) {
+ (void) get_ioregistry_value_number (parent, CFSTR("sessionID"), kCFNumberSInt64Type, &parent_sessionID);
+ IOObjectRelease(parent);
+ }
+
+ usbi_mutex_lock(&darwin_cached_devices_lock);
+ do {
+ *cached_out = NULL;
+
+ list_for_each_entry(new_device, &darwin_cached_devices, list, struct darwin_cached_device) {
+ usbi_dbg("matching sessionID 0x%" PRIx64 " against cached device with sessionID 0x%" PRIx64, sessionID, new_device->session);
+ if (new_device->session == sessionID) {
+ usbi_dbg("using cached device for device");
+ *cached_out = new_device;
+ break;
+ }
+ }
+
+ if (*cached_out)
+ break;
+
+ usbi_dbg("caching new device with sessionID 0x%" PRIx64, sessionID);
+
+ device = darwin_device_from_service (service);
+ if (!device) {
+ ret = LIBUSB_ERROR_NO_DEVICE;
+ break;
+ }
+
+ new_device = calloc (1, sizeof (*new_device));
+ if (!new_device) {
+ ret = LIBUSB_ERROR_NO_MEM;
+ break;
+ }
+
+ /* add this device to the cached device list */
+ list_add(&new_device->list, &darwin_cached_devices);
+
+ (*device)->GetDeviceAddress (device, (USBDeviceAddress *)&new_device->address);
+
+ /* keep a reference to this device */
+ darwin_ref_cached_device(new_device);
+
+ new_device->device = device;
+ new_device->session = sessionID;
+ (*device)->GetLocationID (device, &new_device->location);
+ new_device->port = port;
+ new_device->parent_session = parent_sessionID;
+
+ /* cache the device descriptor */
+ ret = darwin_cache_device_descriptor(ctx, new_device);
+ if (ret)
+ break;
+
+ if (new_device->can_enumerate) {
+ snprintf(new_device->sys_path, 20, "%03i-%04x-%04x-%02x-%02x", new_device->address,
+ new_device->dev_descriptor.idVendor, new_device->dev_descriptor.idProduct,
+ new_device->dev_descriptor.bDeviceClass, new_device->dev_descriptor.bDeviceSubClass);
+ }
+ } while (0);
+
+ usbi_mutex_unlock(&darwin_cached_devices_lock);
+
+ /* keep track of devices regardless of if we successfully enumerate them to
+ prevent them from being enumerated multiple times */
+
+ *cached_out = new_device;
+
+ return ret;
+}
+
+static int process_new_device (struct libusb_context *ctx, io_service_t service) {
+ struct darwin_device_priv *priv;
+ struct libusb_device *dev = NULL;
+ struct darwin_cached_device *cached_device;
+ UInt8 devSpeed;
+ int ret = 0;
+
+ do {
+ ret = darwin_get_cached_device (ctx, service, &cached_device);
+
+ if (ret < 0 || !cached_device->can_enumerate) {
+ return ret;
+ }
+
+ /* check current active configuration (and cache the first configuration value--
+ which may be used by claim_interface) */
+ ret = darwin_check_configuration (ctx, cached_device);
+ if (ret)
+ break;
+
+ usbi_dbg ("allocating new device in context %p for with session 0x%" PRIx64,
+ ctx, cached_device->session);
+
+ dev = usbi_alloc_device(ctx, (unsigned long) cached_device->session);
+ if (!dev) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ priv = (struct darwin_device_priv *)dev->os_priv;
+
+ priv->dev = cached_device;
+ darwin_ref_cached_device (priv->dev);
+
+ if (cached_device->parent_session > 0) {
+ dev->parent_dev = usbi_get_device_by_session_id (ctx, (unsigned long) cached_device->parent_session);
+ } else {
+ dev->parent_dev = NULL;
+ }
+ dev->port_number = cached_device->port;
+ dev->bus_number = cached_device->location >> 24;
+ dev->device_address = cached_device->address;
+
+ (*(priv->dev->device))->GetDeviceSpeed (priv->dev->device, &devSpeed);
+
+ switch (devSpeed) {
+ case kUSBDeviceSpeedLow: dev->speed = LIBUSB_SPEED_LOW; break;
+ case kUSBDeviceSpeedFull: dev->speed = LIBUSB_SPEED_FULL; break;
+ case kUSBDeviceSpeedHigh: dev->speed = LIBUSB_SPEED_HIGH; break;
+#if DeviceVersion >= 500
+ case kUSBDeviceSpeedSuper: dev->speed = LIBUSB_SPEED_SUPER; break;
+#endif
+ default:
+ usbi_warn (ctx, "Got unknown device speed %d", devSpeed);
+ }
+
+ ret = usbi_sanitize_device (dev);
+ if (ret < 0)
+ break;
+
+ usbi_dbg ("found device with address %d port = %d parent = %p at %p", dev->device_address,
+ dev->port_number, (void *) dev->parent_dev, priv->dev->sys_path);
+ } while (0);
+
+ if (0 == ret) {
+ usbi_connect_device (dev);
+ } else {
+ libusb_unref_device (dev);
+ }
+
+ return ret;
+}
+
+static int darwin_scan_devices(struct libusb_context *ctx) {
+ io_iterator_t deviceIterator;
+ io_service_t service;
+ kern_return_t kresult;
+
+ kresult = usb_setup_device_iterator (&deviceIterator, 0);
+ if (kresult != kIOReturnSuccess)
+ return darwin_to_libusb (kresult);
+
+ while ((service = IOIteratorNext (deviceIterator))) {
+ (void) process_new_device (ctx, service);
+
+ IOObjectRelease(service);
+ }
+
+ IOObjectRelease(deviceIterator);
+
+ return 0;
+}
+
+static int darwin_open (struct libusb_device_handle *dev_handle) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ IOReturn kresult;
+
+ if (0 == dpriv->open_count) {
+ /* try to open the device */
+ kresult = (*(dpriv->device))->USBDeviceOpenSeize (dpriv->device);
+ if (kresult != kIOReturnSuccess) {
+ usbi_warn (HANDLE_CTX (dev_handle), "USBDeviceOpen: %s", darwin_error_str(kresult));
+
+ if (kIOReturnExclusiveAccess != kresult) {
+ return darwin_to_libusb (kresult);
+ }
+
+ /* it is possible to perform some actions on a device that is not open so do not return an error */
+ priv->is_open = 0;
+ } else {
+ priv->is_open = 1;
+ }
+
+ /* create async event source */
+ kresult = (*(dpriv->device))->CreateDeviceAsyncEventSource (dpriv->device, &priv->cfSource);
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (HANDLE_CTX (dev_handle), "CreateDeviceAsyncEventSource: %s", darwin_error_str(kresult));
+
+ if (priv->is_open) {
+ (*(dpriv->device))->USBDeviceClose (dpriv->device);
+ }
+
+ priv->is_open = 0;
+
+ return darwin_to_libusb (kresult);
+ }
+
+ CFRetain (libusb_darwin_acfl);
+
+ /* add the cfSource to the aync run loop */
+ CFRunLoopAddSource(libusb_darwin_acfl, priv->cfSource, kCFRunLoopCommonModes);
+ }
+
+ /* device opened successfully */
+ dpriv->open_count++;
+
+ usbi_dbg ("device open for access");
+
+ return 0;
+}
+
+static void darwin_close (struct libusb_device_handle *dev_handle) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ IOReturn kresult;
+ int i;
+
+ if (dpriv->open_count == 0) {
+ /* something is probably very wrong if this is the case */
+ usbi_err (HANDLE_CTX (dev_handle), "Close called on a device that was not open!");
+ return;
+ }
+
+ dpriv->open_count--;
+
+ /* make sure all interfaces are released */
+ for (i = 0 ; i < USB_MAXINTERFACES ; i++)
+ if (dev_handle->claimed_interfaces & (1 << i))
+ libusb_release_interface (dev_handle, i);
+
+ if (0 == dpriv->open_count) {
+ /* delete the device's async event source */
+ if (priv->cfSource) {
+ CFRunLoopRemoveSource (libusb_darwin_acfl, priv->cfSource, kCFRunLoopDefaultMode);
+ CFRelease (priv->cfSource);
+ priv->cfSource = NULL;
+ CFRelease (libusb_darwin_acfl);
+ }
+
+ if (priv->is_open) {
+ /* close the device */
+ kresult = (*(dpriv->device))->USBDeviceClose(dpriv->device);
+ if (kresult) {
+ /* Log the fact that we had a problem closing the file, however failing a
+ * close isn't really an error, so return success anyway */
+ usbi_warn (HANDLE_CTX (dev_handle), "USBDeviceClose: %s", darwin_error_str(kresult));
+ }
+ }
+ }
+}
+
+static int darwin_get_configuration(struct libusb_device_handle *dev_handle, int *config) {
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+
+ *config = (int) dpriv->active_config;
+
+ return 0;
+}
+
+static int darwin_set_configuration(struct libusb_device_handle *dev_handle, int config) {
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ IOReturn kresult;
+ int i;
+
+ /* Setting configuration will invalidate the interface, so we need
+ to reclaim it. First, dispose of existing interfaces, if any. */
+ for (i = 0 ; i < USB_MAXINTERFACES ; i++)
+ if (dev_handle->claimed_interfaces & (1 << i))
+ darwin_release_interface (dev_handle, i);
+
+ kresult = (*(dpriv->device))->SetConfiguration (dpriv->device, config);
+ if (kresult != kIOReturnSuccess)
+ return darwin_to_libusb (kresult);
+
+ /* Reclaim any interfaces. */
+ for (i = 0 ; i < USB_MAXINTERFACES ; i++)
+ if (dev_handle->claimed_interfaces & (1 << i))
+ darwin_claim_interface (dev_handle, i);
+
+ dpriv->active_config = config;
+
+ return 0;
+}
+
+static int darwin_get_interface (usb_device_t **darwin_device, uint8_t ifc, io_service_t *usbInterfacep) {
+ IOUSBFindInterfaceRequest request;
+ kern_return_t kresult;
+ io_iterator_t interface_iterator;
+ UInt8 bInterfaceNumber;
+ int ret;
+
+ *usbInterfacep = IO_OBJECT_NULL;
+
+ /* Setup the Interface Request */
+ request.bInterfaceClass = kIOUSBFindInterfaceDontCare;
+ request.bInterfaceSubClass = kIOUSBFindInterfaceDontCare;
+ request.bInterfaceProtocol = kIOUSBFindInterfaceDontCare;
+ request.bAlternateSetting = kIOUSBFindInterfaceDontCare;
+
+ kresult = (*(darwin_device))->CreateInterfaceIterator(darwin_device, &request, &interface_iterator);
+ if (kresult)
+ return kresult;
+
+ while ((*usbInterfacep = IOIteratorNext(interface_iterator))) {
+ /* find the interface number */
+ ret = get_ioregistry_value_number (*usbInterfacep, CFSTR("bInterfaceNumber"), kCFNumberSInt8Type,
+ &bInterfaceNumber);
+
+ if (ret && bInterfaceNumber == ifc) {
+ break;
+ }
+
+ (void) IOObjectRelease (*usbInterfacep);
+ }
+
+ /* done with the interface iterator */
+ IOObjectRelease(interface_iterator);
+
+ return 0;
+}
+
+static int get_endpoints (struct libusb_device_handle *dev_handle, int iface) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+
+ /* current interface */
+ struct darwin_interface *cInterface = &priv->interfaces[iface];
+
+ kern_return_t kresult;
+
+ u_int8_t numep, direction, number;
+ u_int8_t dont_care1, dont_care3;
+ u_int16_t dont_care2;
+ int i;
+
+ usbi_dbg ("building table of endpoints.");
+
+ /* retrieve the total number of endpoints on this interface */
+ kresult = (*(cInterface->interface))->GetNumEndpoints(cInterface->interface, &numep);
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "can't get number of endpoints for interface: %s", darwin_error_str(kresult));
+ return darwin_to_libusb (kresult);
+ }
+
+ /* iterate through pipe references */
+ for (i = 1 ; i <= numep ; i++) {
+ kresult = (*(cInterface->interface))->GetPipeProperties(cInterface->interface, i, &direction, &number, &dont_care1,
+ &dont_care2, &dont_care3);
+
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (HANDLE_CTX (dev_handle), "error getting pipe information for pipe %d: %s", i, darwin_error_str(kresult));
+
+ return darwin_to_libusb (kresult);
+ }
+
+ usbi_dbg ("interface: %i pipe %i: dir: %i number: %i", iface, i, direction, number);
+
+ cInterface->endpoint_addrs[i - 1] = (((kUSBIn == direction) << kUSBRqDirnShift) | (number & LIBUSB_ENDPOINT_ADDRESS_MASK));
+ }
+
+ cInterface->num_endpoints = numep;
+
+ return 0;
+}
+
+static int darwin_claim_interface(struct libusb_device_handle *dev_handle, int iface) {
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+ io_service_t usbInterface = IO_OBJECT_NULL;
+ IOReturn kresult;
+ IOCFPlugInInterface **plugInInterface = NULL;
+ SInt32 score;
+
+ /* current interface */
+ struct darwin_interface *cInterface = &priv->interfaces[iface];
+
+ kresult = darwin_get_interface (dpriv->device, iface, &usbInterface);
+ if (kresult != kIOReturnSuccess)
+ return darwin_to_libusb (kresult);
+
+ /* make sure we have an interface */
+ if (!usbInterface && dpriv->first_config != 0) {
+ usbi_info (HANDLE_CTX (dev_handle), "no interface found; setting configuration: %d", dpriv->first_config);
+
+ /* set the configuration */
+ kresult = darwin_set_configuration (dev_handle, dpriv->first_config);
+ if (kresult != LIBUSB_SUCCESS) {
+ usbi_err (HANDLE_CTX (dev_handle), "could not set configuration");
+ return kresult;
+ }
+
+ kresult = darwin_get_interface (dpriv->device, iface, &usbInterface);
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "darwin_get_interface: %s", darwin_error_str(kresult));
+ return darwin_to_libusb (kresult);
+ }
+ }
+
+ if (!usbInterface) {
+ usbi_err (HANDLE_CTX (dev_handle), "interface not found");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ /* get an interface to the device's interface */
+ kresult = IOCreatePlugInInterfaceForService (usbInterface, kIOUSBInterfaceUserClientTypeID,
+ kIOCFPlugInInterfaceID, &plugInInterface, &score);
+
+ /* ignore release error */
+ (void)IOObjectRelease (usbInterface);
+
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "IOCreatePlugInInterfaceForService: %s", darwin_error_str(kresult));
+ return darwin_to_libusb (kresult);
+ }
+
+ if (!plugInInterface) {
+ usbi_err (HANDLE_CTX (dev_handle), "plugin interface not found");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ /* Do the actual claim */
+ kresult = (*plugInInterface)->QueryInterface(plugInInterface,
+ CFUUIDGetUUIDBytes(kIOUSBInterfaceInterfaceID),
+ (LPVOID)&cInterface->interface);
+ /* We no longer need the intermediate plug-in */
+ /* Use release instead of IODestroyPlugInInterface to avoid stopping IOServices associated with this device */
+ (*plugInInterface)->Release (plugInInterface);
+ if (kresult || !cInterface->interface) {
+ usbi_err (HANDLE_CTX (dev_handle), "QueryInterface: %s", darwin_error_str(kresult));
+ return darwin_to_libusb (kresult);
+ }
+
+ /* claim the interface */
+ kresult = (*(cInterface->interface))->USBInterfaceOpen(cInterface->interface);
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "USBInterfaceOpen: %s", darwin_error_str(kresult));
+ return darwin_to_libusb (kresult);
+ }
+
+ /* update list of endpoints */
+ kresult = get_endpoints (dev_handle, iface);
+ if (kresult) {
+ /* this should not happen */
+ darwin_release_interface (dev_handle, iface);
+ usbi_err (HANDLE_CTX (dev_handle), "could not build endpoint table");
+ return kresult;
+ }
+
+ cInterface->cfSource = NULL;
+
+ /* create async event source */
+ kresult = (*(cInterface->interface))->CreateInterfaceAsyncEventSource (cInterface->interface, &cInterface->cfSource);
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (HANDLE_CTX (dev_handle), "could not create async event source");
+
+ /* can't continue without an async event source */
+ (void)darwin_release_interface (dev_handle, iface);
+
+ return darwin_to_libusb (kresult);
+ }
+
+ /* add the cfSource to the async thread's run loop */
+ CFRunLoopAddSource(libusb_darwin_acfl, cInterface->cfSource, kCFRunLoopDefaultMode);
+
+ usbi_dbg ("interface opened");
+
+ return 0;
+}
+
+static int darwin_release_interface(struct libusb_device_handle *dev_handle, int iface) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+ IOReturn kresult;
+
+ /* current interface */
+ struct darwin_interface *cInterface = &priv->interfaces[iface];
+
+ /* Check to see if an interface is open */
+ if (!cInterface->interface)
+ return LIBUSB_SUCCESS;
+
+ /* clean up endpoint data */
+ cInterface->num_endpoints = 0;
+
+ /* delete the interface's async event source */
+ if (cInterface->cfSource) {
+ CFRunLoopRemoveSource (libusb_darwin_acfl, cInterface->cfSource, kCFRunLoopDefaultMode);
+ CFRelease (cInterface->cfSource);
+ }
+
+ kresult = (*(cInterface->interface))->USBInterfaceClose(cInterface->interface);
+ if (kresult)
+ usbi_warn (HANDLE_CTX (dev_handle), "USBInterfaceClose: %s", darwin_error_str(kresult));
+
+ kresult = (*(cInterface->interface))->Release(cInterface->interface);
+ if (kresult != kIOReturnSuccess)
+ usbi_warn (HANDLE_CTX (dev_handle), "Release: %s", darwin_error_str(kresult));
+
+ cInterface->interface = IO_OBJECT_NULL;
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_set_interface_altsetting(struct libusb_device_handle *dev_handle, int iface, int altsetting) {
+ struct darwin_device_handle_priv *priv = (struct darwin_device_handle_priv *)dev_handle->os_priv;
+ IOReturn kresult;
+
+ /* current interface */
+ struct darwin_interface *cInterface = &priv->interfaces[iface];
+
+ if (!cInterface->interface)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ kresult = (*(cInterface->interface))->SetAlternateInterface (cInterface->interface, altsetting);
+ if (kresult != kIOReturnSuccess)
+ darwin_reset_device (dev_handle);
+
+ /* update list of endpoints */
+ kresult = get_endpoints (dev_handle, iface);
+ if (kresult) {
+ /* this should not happen */
+ darwin_release_interface (dev_handle, iface);
+ usbi_err (HANDLE_CTX (dev_handle), "could not build endpoint table");
+ return kresult;
+ }
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_clear_halt(struct libusb_device_handle *dev_handle, unsigned char endpoint) {
+ /* current interface */
+ struct darwin_interface *cInterface;
+ IOReturn kresult;
+ uint8_t pipeRef;
+
+ /* determine the interface/endpoint to use */
+ if (ep_to_pipeRef (dev_handle, endpoint, &pipeRef, NULL, &cInterface) != 0) {
+ usbi_err (HANDLE_CTX (dev_handle), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ /* newer versions of darwin support clearing additional bits on the device's endpoint */
+ kresult = (*(cInterface->interface))->ClearPipeStallBothEnds(cInterface->interface, pipeRef);
+ if (kresult)
+ usbi_warn (HANDLE_CTX (dev_handle), "ClearPipeStall: %s", darwin_error_str (kresult));
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_reset_device(struct libusb_device_handle *dev_handle) {
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ IOUSBDeviceDescriptor descriptor;
+ IOUSBConfigurationDescriptorPtr cached_configuration;
+ IOUSBConfigurationDescriptor configuration;
+ bool reenumerate = false;
+ IOReturn kresult;
+ int i;
+
+ kresult = (*(dpriv->device))->ResetDevice (dpriv->device);
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "ResetDevice: %s", darwin_error_str (kresult));
+ return darwin_to_libusb (kresult);
+ }
+
+ do {
+ usbi_dbg ("darwin/reset_device: checking if device descriptor changed");
+
+ /* ignore return code. if we can't get a descriptor it might be worthwhile re-enumerating anway */
+ (void) darwin_request_descriptor (dpriv->device, kUSBDeviceDesc, 0, &descriptor, sizeof (descriptor));
+
+ /* check if the device descriptor has changed */
+ if (0 != memcmp (&dpriv->dev_descriptor, &descriptor, sizeof (descriptor))) {
+ reenumerate = true;
+ break;
+ }
+
+ /* check if any configuration descriptor has changed */
+ for (i = 0 ; i < descriptor.bNumConfigurations ; ++i) {
+ usbi_dbg ("darwin/reset_device: checking if configuration descriptor %d changed", i);
+
+ (void) darwin_request_descriptor (dpriv->device, kUSBConfDesc, i, &configuration, sizeof (configuration));
+ (*(dpriv->device))->GetConfigurationDescriptorPtr (dpriv->device, i, &cached_configuration);
+
+ if (!cached_configuration || 0 != memcmp (cached_configuration, &configuration, sizeof (configuration))) {
+ reenumerate = true;
+ break;
+ }
+ }
+ } while (0);
+
+ if (reenumerate) {
+ usbi_dbg ("darwin/reset_device: device requires reenumeration");
+ (void) (*(dpriv->device))->USBDeviceReEnumerate (dpriv->device, 0);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg ("darwin/reset_device: device reset complete");
+
+ return LIBUSB_SUCCESS;
+}
+
+static int darwin_kernel_driver_active(struct libusb_device_handle *dev_handle, int interface) {
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(dev_handle->dev);
+ io_service_t usbInterface;
+ CFTypeRef driver;
+ IOReturn kresult;
+
+ kresult = darwin_get_interface (dpriv->device, interface, &usbInterface);
+ if (kresult) {
+ usbi_err (HANDLE_CTX (dev_handle), "darwin_get_interface: %s", darwin_error_str(kresult));
+
+ return darwin_to_libusb (kresult);
+ }
+
+ driver = IORegistryEntryCreateCFProperty (usbInterface, kIOBundleIdentifierKey, kCFAllocatorDefault, 0);
+ IOObjectRelease (usbInterface);
+
+ if (driver) {
+ CFRelease (driver);
+
+ return 1;
+ }
+
+ /* no driver */
+ return 0;
+}
+
+/* attaching/detaching kernel drivers is not currently supported (maybe in the future?) */
+static int darwin_attach_kernel_driver (struct libusb_device_handle *dev_handle, int interface) {
+ (void)dev_handle;
+ (void)interface;
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static int darwin_detach_kernel_driver (struct libusb_device_handle *dev_handle, int interface) {
+ (void)dev_handle;
+ (void)interface;
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static void darwin_destroy_device(struct libusb_device *dev) {
+ struct darwin_device_priv *dpriv = (struct darwin_device_priv *) dev->os_priv;
+
+ if (dpriv->dev) {
+ /* need to hold the lock in case this is the last reference to the device */
+ usbi_mutex_lock(&darwin_cached_devices_lock);
+ darwin_deref_cached_device (dpriv->dev);
+ dpriv->dev = NULL;
+ usbi_mutex_unlock(&darwin_cached_devices_lock);
+ }
+}
+
+static int submit_bulk_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ IOReturn ret;
+ uint8_t transferType;
+ /* None of the values below are used in libusbx for bulk transfers */
+ uint8_t direction, number, interval, pipeRef;
+ uint16_t maxPacketSize;
+
+ struct darwin_interface *cInterface;
+
+ if (ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, NULL, &cInterface) != 0) {
+ usbi_err (TRANSFER_CTX (transfer), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ ret = (*(cInterface->interface))->GetPipeProperties (cInterface->interface, pipeRef, &direction, &number,
+ &transferType, &maxPacketSize, &interval);
+
+ if (ret) {
+ usbi_err (TRANSFER_CTX (transfer), "bulk transfer failed (dir = %s): %s (code = 0x%08x)", IS_XFERIN(transfer) ? "In" : "Out",
+ darwin_error_str(ret), ret);
+ return darwin_to_libusb (ret);
+ }
+
+ if (0 != (transfer->length % maxPacketSize)) {
+ /* do not need a zero packet */
+ transfer->flags &= ~LIBUSB_TRANSFER_ADD_ZERO_PACKET;
+ }
+
+ /* submit the request */
+ /* timeouts are unavailable on interrupt endpoints */
+ if (transferType == kUSBInterrupt) {
+ if (IS_XFERIN(transfer))
+ ret = (*(cInterface->interface))->ReadPipeAsync(cInterface->interface, pipeRef, transfer->buffer,
+ transfer->length, darwin_async_io_callback, itransfer);
+ else
+ ret = (*(cInterface->interface))->WritePipeAsync(cInterface->interface, pipeRef, transfer->buffer,
+ transfer->length, darwin_async_io_callback, itransfer);
+ } else {
+ itransfer->flags |= USBI_TRANSFER_OS_HANDLES_TIMEOUT;
+
+ if (IS_XFERIN(transfer))
+ ret = (*(cInterface->interface))->ReadPipeAsyncTO(cInterface->interface, pipeRef, transfer->buffer,
+ transfer->length, transfer->timeout, transfer->timeout,
+ darwin_async_io_callback, (void *)itransfer);
+ else
+ ret = (*(cInterface->interface))->WritePipeAsyncTO(cInterface->interface, pipeRef, transfer->buffer,
+ transfer->length, transfer->timeout, transfer->timeout,
+ darwin_async_io_callback, (void *)itransfer);
+ }
+
+ if (ret)
+ usbi_err (TRANSFER_CTX (transfer), "bulk transfer failed (dir = %s): %s (code = 0x%08x)", IS_XFERIN(transfer) ? "In" : "Out",
+ darwin_error_str(ret), ret);
+
+ return darwin_to_libusb (ret);
+}
+
+#if InterfaceVersion >= 550
+static int submit_stream_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_interface *cInterface;
+ uint8_t pipeRef;
+ IOReturn ret;
+
+ if (ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, NULL, &cInterface) != 0) {
+ usbi_err (TRANSFER_CTX (transfer), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ itransfer->flags |= USBI_TRANSFER_OS_HANDLES_TIMEOUT;
+
+ if (IS_XFERIN(transfer))
+ ret = (*(cInterface->interface))->ReadStreamsPipeAsyncTO(cInterface->interface, pipeRef, itransfer->stream_id,
+ transfer->buffer, transfer->length, transfer->timeout,
+ transfer->timeout, darwin_async_io_callback, (void *)itransfer);
+ else
+ ret = (*(cInterface->interface))->WriteStreamsPipeAsyncTO(cInterface->interface, pipeRef, itransfer->stream_id,
+ transfer->buffer, transfer->length, transfer->timeout,
+ transfer->timeout, darwin_async_io_callback, (void *)itransfer);
+
+ if (ret)
+ usbi_err (TRANSFER_CTX (transfer), "bulk stream transfer failed (dir = %s): %s (code = 0x%08x)", IS_XFERIN(transfer) ? "In" : "Out",
+ darwin_error_str(ret), ret);
+
+ return darwin_to_libusb (ret);
+}
+#endif
+
+static int submit_iso_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+ IOReturn kresult;
+ uint8_t direction, number, interval, pipeRef, transferType;
+ uint16_t maxPacketSize;
+ UInt64 frame;
+ AbsoluteTime atTime;
+ int i;
+
+ struct darwin_interface *cInterface;
+
+ /* construct an array of IOUSBIsocFrames, reuse the old one if possible */
+ if (tpriv->isoc_framelist && tpriv->num_iso_packets != transfer->num_iso_packets) {
+ free(tpriv->isoc_framelist);
+ tpriv->isoc_framelist = NULL;
+ }
+
+ if (!tpriv->isoc_framelist) {
+ tpriv->num_iso_packets = transfer->num_iso_packets;
+ tpriv->isoc_framelist = (IOUSBIsocFrame*) calloc (transfer->num_iso_packets, sizeof(IOUSBIsocFrame));
+ if (!tpriv->isoc_framelist)
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ /* copy the frame list from the libusb descriptor (the structures differ only is member order) */
+ for (i = 0 ; i < transfer->num_iso_packets ; i++)
+ tpriv->isoc_framelist[i].frReqCount = transfer->iso_packet_desc[i].length;
+
+ /* determine the interface/endpoint to use */
+ if (ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, NULL, &cInterface) != 0) {
+ usbi_err (TRANSFER_CTX (transfer), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ /* determine the properties of this endpoint and the speed of the device */
+ (*(cInterface->interface))->GetPipeProperties (cInterface->interface, pipeRef, &direction, &number,
+ &transferType, &maxPacketSize, &interval);
+
+ /* Last but not least we need the bus frame number */
+ kresult = (*(cInterface->interface))->GetBusFrameNumber(cInterface->interface, &frame, &atTime);
+ if (kresult) {
+ usbi_err (TRANSFER_CTX (transfer), "failed to get bus frame number: %d", kresult);
+ free(tpriv->isoc_framelist);
+ tpriv->isoc_framelist = NULL;
+
+ return darwin_to_libusb (kresult);
+ }
+
+ (*(cInterface->interface))->GetPipeProperties (cInterface->interface, pipeRef, &direction, &number,
+ &transferType, &maxPacketSize, &interval);
+
+ /* schedule for a frame a little in the future */
+ frame += 4;
+
+ if (cInterface->frames[transfer->endpoint] && frame < cInterface->frames[transfer->endpoint])
+ frame = cInterface->frames[transfer->endpoint];
+
+ /* submit the request */
+ if (IS_XFERIN(transfer))
+ kresult = (*(cInterface->interface))->ReadIsochPipeAsync(cInterface->interface, pipeRef, transfer->buffer, frame,
+ transfer->num_iso_packets, tpriv->isoc_framelist, darwin_async_io_callback,
+ itransfer);
+ else
+ kresult = (*(cInterface->interface))->WriteIsochPipeAsync(cInterface->interface, pipeRef, transfer->buffer, frame,
+ transfer->num_iso_packets, tpriv->isoc_framelist, darwin_async_io_callback,
+ itransfer);
+
+ if (LIBUSB_SPEED_FULL == transfer->dev_handle->dev->speed)
+ /* Full speed */
+ cInterface->frames[transfer->endpoint] = frame + transfer->num_iso_packets * (1 << (interval - 1));
+ else
+ /* High/super speed */
+ cInterface->frames[transfer->endpoint] = frame + transfer->num_iso_packets * (1 << (interval - 1)) / 8;
+
+ if (kresult != kIOReturnSuccess) {
+ usbi_err (TRANSFER_CTX (transfer), "isochronous transfer failed (dir: %s): %s", IS_XFERIN(transfer) ? "In" : "Out",
+ darwin_error_str(kresult));
+ free (tpriv->isoc_framelist);
+ tpriv->isoc_framelist = NULL;
+ }
+
+ return darwin_to_libusb (kresult);
+}
+
+static int submit_control_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_control_setup *setup = (struct libusb_control_setup *) transfer->buffer;
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(transfer->dev_handle->dev);
+ struct darwin_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+ IOReturn kresult;
+
+ bzero(&tpriv->req, sizeof(tpriv->req));
+
+ /* IOUSBDeviceInterface expects the request in cpu endianess */
+ tpriv->req.bmRequestType = setup->bmRequestType;
+ tpriv->req.bRequest = setup->bRequest;
+ /* these values should be in bus order from libusb_fill_control_setup */
+ tpriv->req.wValue = OSSwapLittleToHostInt16 (setup->wValue);
+ tpriv->req.wIndex = OSSwapLittleToHostInt16 (setup->wIndex);
+ tpriv->req.wLength = OSSwapLittleToHostInt16 (setup->wLength);
+ /* data is stored after the libusb control block */
+ tpriv->req.pData = transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
+ tpriv->req.completionTimeout = transfer->timeout;
+ tpriv->req.noDataTimeout = transfer->timeout;
+
+ itransfer->flags |= USBI_TRANSFER_OS_HANDLES_TIMEOUT;
+
+ /* all transfers in libusb-1.0 are async */
+
+ if (transfer->endpoint) {
+ struct darwin_interface *cInterface;
+ uint8_t pipeRef;
+
+ if (ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, NULL, &cInterface) != 0) {
+ usbi_err (TRANSFER_CTX (transfer), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ kresult = (*(cInterface->interface))->ControlRequestAsyncTO (cInterface->interface, pipeRef, &(tpriv->req), darwin_async_io_callback, itransfer);
+ } else
+ /* control request on endpoint 0 */
+ kresult = (*(dpriv->device))->DeviceRequestAsyncTO(dpriv->device, &(tpriv->req), darwin_async_io_callback, itransfer);
+
+ if (kresult != kIOReturnSuccess)
+ usbi_err (TRANSFER_CTX (transfer), "control request failed: %s", darwin_error_str(kresult));
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_submit_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return submit_control_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ return submit_bulk_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return submit_iso_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+#if InterfaceVersion >= 550
+ return submit_stream_transfer(itransfer);
+#else
+ usbi_err (TRANSFER_CTX(transfer), "IOUSBFamily version does not support bulk stream transfers");
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+#endif
+ default:
+ usbi_err (TRANSFER_CTX(transfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static int cancel_control_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(transfer->dev_handle->dev);
+ IOReturn kresult;
+
+ usbi_warn (ITRANSFER_CTX (itransfer), "aborting all transactions control pipe");
+
+ if (!dpriv->device)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ kresult = (*(dpriv->device))->USBDeviceAbortPipeZero (dpriv->device);
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_abort_transfers (struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_cached_device *dpriv = DARWIN_CACHED_DEVICE(transfer->dev_handle->dev);
+ struct darwin_interface *cInterface;
+ uint8_t pipeRef, iface;
+ IOReturn kresult;
+
+ if (ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, &iface, &cInterface) != 0) {
+ usbi_err (TRANSFER_CTX (transfer), "endpoint not found on any open interface");
+
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ if (!dpriv->device)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_warn (ITRANSFER_CTX (itransfer), "aborting all transactions on interface %d pipe %d", iface, pipeRef);
+
+ /* abort transactions */
+#if InterfaceVersion >= 550
+ if (LIBUSB_TRANSFER_TYPE_BULK_STREAM == transfer->type)
+ (*(cInterface->interface))->AbortStreamsPipe (cInterface->interface, pipeRef, itransfer->stream_id);
+ else
+#endif
+ (*(cInterface->interface))->AbortPipe (cInterface->interface, pipeRef);
+
+ usbi_dbg ("calling clear pipe stall to clear the data toggle bit");
+
+ /* newer versions of darwin support clearing additional bits on the device's endpoint */
+ kresult = (*(cInterface->interface))->ClearPipeStallBothEnds(cInterface->interface, pipeRef);
+
+ return darwin_to_libusb (kresult);
+}
+
+static int darwin_cancel_transfer(struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return cancel_control_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return darwin_abort_transfers (itransfer);
+ default:
+ usbi_err (TRANSFER_CTX(transfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static void darwin_clear_transfer_priv (struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+ if (transfer->type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS && tpriv->isoc_framelist) {
+ free (tpriv->isoc_framelist);
+ tpriv->isoc_framelist = NULL;
+ }
+}
+
+static void darwin_async_io_callback (void *refcon, IOReturn result, void *arg0) {
+ struct usbi_transfer *itransfer = (struct usbi_transfer *)refcon;
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+ usbi_dbg ("an async io operation has completed");
+
+ /* if requested write a zero packet */
+ if (kIOReturnSuccess == result && IS_XFEROUT(transfer) && transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET) {
+ struct darwin_interface *cInterface;
+ uint8_t pipeRef;
+
+ (void) ep_to_pipeRef (transfer->dev_handle, transfer->endpoint, &pipeRef, NULL, &cInterface);
+
+ (*(cInterface->interface))->WritePipe (cInterface->interface, pipeRef, transfer->buffer, 0);
+ }
+
+ tpriv->result = result;
+ tpriv->size = (UInt32) (uintptr_t) arg0;
+
+ /* signal the core that this transfer is complete */
+ usbi_signal_transfer_completion(itransfer);
+}
+
+static int darwin_transfer_status (struct usbi_transfer *itransfer, kern_return_t result) {
+ if (itransfer->flags & USBI_TRANSFER_TIMED_OUT)
+ result = kIOUSBTransactionTimeout;
+
+ switch (result) {
+ case kIOReturnUnderrun:
+ case kIOReturnSuccess:
+ return LIBUSB_TRANSFER_COMPLETED;
+ case kIOReturnAborted:
+ return LIBUSB_TRANSFER_CANCELLED;
+ case kIOUSBPipeStalled:
+ usbi_dbg ("transfer error: pipe is stalled");
+ return LIBUSB_TRANSFER_STALL;
+ case kIOReturnOverrun:
+ usbi_warn (ITRANSFER_CTX (itransfer), "transfer error: data overrun");
+ return LIBUSB_TRANSFER_OVERFLOW;
+ case kIOUSBTransactionTimeout:
+ usbi_warn (ITRANSFER_CTX (itransfer), "transfer error: timed out");
+ itransfer->flags |= USBI_TRANSFER_TIMED_OUT;
+ return LIBUSB_TRANSFER_TIMED_OUT;
+ default:
+ usbi_warn (ITRANSFER_CTX (itransfer), "transfer error: %s (value = 0x%08x)", darwin_error_str (result), result);
+ return LIBUSB_TRANSFER_ERROR;
+ }
+}
+
+static int darwin_handle_transfer_completion (struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct darwin_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ int isIsoc = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS == transfer->type;
+ int isBulk = LIBUSB_TRANSFER_TYPE_BULK == transfer->type;
+ int isControl = LIBUSB_TRANSFER_TYPE_CONTROL == transfer->type;
+ int isInterrupt = LIBUSB_TRANSFER_TYPE_INTERRUPT == transfer->type;
+ int i;
+
+ if (!isIsoc && !isBulk && !isControl && !isInterrupt) {
+ usbi_err (TRANSFER_CTX(transfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ usbi_dbg ("handling %s completion with kernel status %d",
+ isControl ? "control" : isBulk ? "bulk" : isIsoc ? "isoc" : "interrupt", tpriv->result);
+
+ if (kIOReturnSuccess == tpriv->result || kIOReturnUnderrun == tpriv->result) {
+ if (isIsoc && tpriv->isoc_framelist) {
+ /* copy isochronous results back */
+
+ for (i = 0; i < transfer->num_iso_packets ; i++) {
+ struct libusb_iso_packet_descriptor *lib_desc = &transfer->iso_packet_desc[i];
+ lib_desc->status = darwin_to_libusb (tpriv->isoc_framelist[i].frStatus);
+ lib_desc->actual_length = tpriv->isoc_framelist[i].frActCount;
+ }
+ } else if (!isIsoc)
+ itransfer->transferred += tpriv->size;
+ }
+
+ /* it is ok to handle cancelled transfers without calling usbi_handle_transfer_cancellation (we catch timeout transfers) */
+ return usbi_handle_transfer_completion (itransfer, darwin_transfer_status (itransfer, tpriv->result));
+}
+
+static int darwin_clock_gettime(int clk_id, struct timespec *tp) {
+ mach_timespec_t sys_time;
+ clock_serv_t clock_ref;
+
+ switch (clk_id) {
+ case USBI_CLOCK_REALTIME:
+ /* CLOCK_REALTIME represents time since the epoch */
+ clock_ref = clock_realtime;
+ break;
+ case USBI_CLOCK_MONOTONIC:
+ /* use system boot time as reference for the monotonic clock */
+ clock_ref = clock_monotonic;
+ break;
+ default:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ clock_get_time (clock_ref, &sys_time);
+
+ tp->tv_sec = sys_time.tv_sec;
+ tp->tv_nsec = sys_time.tv_nsec;
+
+ return 0;
+}
+
+#if InterfaceVersion >= 550
+static int darwin_alloc_streams (struct libusb_device_handle *dev_handle, uint32_t num_streams, unsigned char *endpoints,
+ int num_endpoints) {
+ struct darwin_interface *cInterface;
+ UInt32 supportsStreams;
+ uint8_t pipeRef;
+ int rc, i;
+
+ /* find the mimimum number of supported streams on the endpoint list */
+ for (i = 0 ; i < num_endpoints ; ++i) {
+ if (0 != (rc = ep_to_pipeRef (dev_handle, endpoints[i], &pipeRef, NULL, &cInterface))) {
+ return rc;
+ }
+
+ (*(cInterface->interface))->SupportsStreams (cInterface->interface, pipeRef, &supportsStreams);
+ if (num_streams > supportsStreams)
+ num_streams = supportsStreams;
+ }
+
+ /* it is an error if any endpoint in endpoints does not support streams */
+ if (0 == num_streams)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ /* create the streams */
+ for (i = 0 ; i < num_endpoints ; ++i) {
+ (void) ep_to_pipeRef (dev_handle, endpoints[i], &pipeRef, NULL, &cInterface);
+
+ rc = (*(cInterface->interface))->CreateStreams (cInterface->interface, pipeRef, num_streams);
+ if (kIOReturnSuccess != rc)
+ return darwin_to_libusb(rc);
+ }
+
+ return num_streams;
+}
+
+static int darwin_free_streams (struct libusb_device_handle *dev_handle, unsigned char *endpoints, int num_endpoints) {
+ struct darwin_interface *cInterface;
+ UInt32 supportsStreams;
+ uint8_t pipeRef;
+ int rc;
+
+ for (int i = 0 ; i < num_endpoints ; ++i) {
+ if (0 != (rc = ep_to_pipeRef (dev_handle, endpoints[i], &pipeRef, NULL, &cInterface)))
+ return rc;
+
+ (*(cInterface->interface))->SupportsStreams (cInterface->interface, pipeRef, &supportsStreams);
+ if (0 == supportsStreams)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ rc = (*(cInterface->interface))->CreateStreams (cInterface->interface, pipeRef, 0);
+ if (kIOReturnSuccess != rc)
+ return darwin_to_libusb(rc);
+ }
+
+ return LIBUSB_SUCCESS;
+}
+#endif
+
+const struct usbi_os_backend darwin_backend = {
+ .name = "Darwin",
+ .caps = 0,
+ .init = darwin_init,
+ .exit = darwin_exit,
+ .get_device_list = NULL, /* not needed */
+ .get_device_descriptor = darwin_get_device_descriptor,
+ .get_active_config_descriptor = darwin_get_active_config_descriptor,
+ .get_config_descriptor = darwin_get_config_descriptor,
+ .hotplug_poll = darwin_hotplug_poll,
+
+ .open = darwin_open,
+ .close = darwin_close,
+ .get_configuration = darwin_get_configuration,
+ .set_configuration = darwin_set_configuration,
+ .claim_interface = darwin_claim_interface,
+ .release_interface = darwin_release_interface,
+
+ .set_interface_altsetting = darwin_set_interface_altsetting,
+ .clear_halt = darwin_clear_halt,
+ .reset_device = darwin_reset_device,
+
+#if InterfaceVersion >= 550
+ .alloc_streams = darwin_alloc_streams,
+ .free_streams = darwin_free_streams,
+#endif
+
+ .kernel_driver_active = darwin_kernel_driver_active,
+ .detach_kernel_driver = darwin_detach_kernel_driver,
+ .attach_kernel_driver = darwin_attach_kernel_driver,
+
+ .destroy_device = darwin_destroy_device,
+
+ .submit_transfer = darwin_submit_transfer,
+ .cancel_transfer = darwin_cancel_transfer,
+ .clear_transfer_priv = darwin_clear_transfer_priv,
+
+ .handle_transfer_completion = darwin_handle_transfer_completion,
+
+ .clock_gettime = darwin_clock_gettime,
+
+ .device_priv_size = sizeof(struct darwin_device_priv),
+ .device_handle_priv_size = sizeof(struct darwin_device_handle_priv),
+ .transfer_priv_size = sizeof(struct darwin_transfer_priv),
+};
--- /dev/null
+/*
+ * darwin backend for libusb 1.0
+ * Copyright © 2008-2013 Nathan Hjelm <hjelmn@users.sourceforge.net>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#if !defined(LIBUSB_DARWIN_H)
+#define LIBUSB_DARWIN_H
+
+#include "libusbi.h"
+
+#include <IOKit/IOTypes.h>
+#include <IOKit/IOCFBundle.h>
+#include <IOKit/usb/IOUSBLib.h>
+#include <IOKit/IOCFPlugIn.h>
+
+/* IOUSBInterfaceInferface */
+#if defined (kIOUSBInterfaceInterfaceID550) && MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_9
+
+#define usb_interface_t IOUSBInterfaceInterface550
+#define InterfaceInterfaceID kIOUSBInterfaceInterfaceID550
+#define InterfaceVersion 550
+
+#elif defined (kIOUSBInterfaceInterfaceID500)
+
+#define usb_interface_t IOUSBInterfaceInterface500
+#define InterfaceInterfaceID kIOUSBInterfaceInterfaceID500
+#define InterfaceVersion 500
+
+#elif defined (kIOUSBInterfaceInterfaceID300)
+
+#define usb_interface_t IOUSBInterfaceInterface300
+#define InterfaceInterfaceID kIOUSBInterfaceInterfaceID300
+#define InterfaceVersion 300
+
+#elif defined (kIOUSBInterfaceInterfaceID245)
+
+#define usb_interface_t IOUSBInterfaceInterface245
+#define InterfaceInterfaceID kIOUSBInterfaceInterfaceID245
+#define InterfaceVersion 245
+
+#elif defined (kIOUSBInterfaceInterfaceID220)
+
+#define usb_interface_t IOUSBInterfaceInterface220
+#define InterfaceInterfaceID kIOUSBInterfaceInterfaceID220
+#define InterfaceVersion 220
+
+#else
+
+#error "IOUSBFamily is too old. Please upgrade your OS"
+
+#endif
+
+/* IOUSBDeviceInterface */
+#if defined (kIOUSBDeviceInterfaceID500) && MAC_OS_X_VERSION_MIN_REQUIRED >= MAC_OS_X_VERSION_10_9
+
+#define usb_device_t IOUSBDeviceInterface500
+#define DeviceInterfaceID kIOUSBDeviceInterfaceID500
+#define DeviceVersion 500
+
+#elif defined (kIOUSBDeviceInterfaceID320)
+
+#define usb_device_t IOUSBDeviceInterface320
+#define DeviceInterfaceID kIOUSBDeviceInterfaceID320
+#define DeviceVersion 320
+
+#elif defined (kIOUSBDeviceInterfaceID300)
+
+#define usb_device_t IOUSBDeviceInterface300
+#define DeviceInterfaceID kIOUSBDeviceInterfaceID300
+#define DeviceVersion 300
+
+#elif defined (kIOUSBDeviceInterfaceID245)
+
+#define usb_device_t IOUSBDeviceInterface245
+#define DeviceInterfaceID kIOUSBDeviceInterfaceID245
+#define DeviceVersion 245
+
+#elif defined (kIOUSBDeviceInterfaceID220)
+#define usb_device_t IOUSBDeviceInterface197
+#define DeviceInterfaceID kIOUSBDeviceInterfaceID197
+#define DeviceVersion 197
+
+#else
+
+#error "IOUSBFamily is too old. Please upgrade your OS"
+
+#endif
+
+#if !defined(IO_OBJECT_NULL)
+#define IO_OBJECT_NULL ((io_object_t) 0)
+#endif
+
+typedef IOCFPlugInInterface *io_cf_plugin_ref_t;
+typedef IONotificationPortRef io_notification_port_t;
+
+/* private structures */
+struct darwin_cached_device {
+ struct list_head list;
+ IOUSBDeviceDescriptor dev_descriptor;
+ UInt32 location;
+ UInt64 parent_session;
+ UInt64 session;
+ UInt16 address;
+ char sys_path[21];
+ usb_device_t **device;
+ int open_count;
+ UInt8 first_config, active_config, port;
+ int can_enumerate;
+ int refcount;
+};
+
+struct darwin_device_priv {
+ struct darwin_cached_device *dev;
+};
+
+struct darwin_device_handle_priv {
+ int is_open;
+ CFRunLoopSourceRef cfSource;
+
+ struct darwin_interface {
+ usb_interface_t **interface;
+ uint8_t num_endpoints;
+ CFRunLoopSourceRef cfSource;
+ uint64_t frames[256];
+ uint8_t endpoint_addrs[USB_MAXENDPOINTS];
+ } interfaces[USB_MAXINTERFACES];
+};
+
+struct darwin_transfer_priv {
+ /* Isoc */
+ IOUSBIsocFrame *isoc_framelist;
+ int num_iso_packets;
+
+ /* Control */
+ IOUSBDevRequestTO req;
+
+ /* Bulk */
+
+ /* Completion status */
+ IOReturn result;
+ UInt32 size;
+};
+
+#endif
--- /dev/null
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects
+noinst_LTLIBRARIES = libhaikuusb.la
+libhaikuusb_la_CPPFLAGS = $(AM_CPPFLAGS) -I$(srcdir)/.. -I$(srcdir)/../.. -I$(srcdir)/../../.. -I$(srcdir)/../../../..
+libhaikuusb_la_SOURCES = haiku_usb_raw.cpp haiku_usb_backend.cpp haiku_pollfs.cpp haiku_usb_raw.h haiku_usb.h
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+libhaikuusb_la_LIBADD =
+am_libhaikuusb_la_OBJECTS = libhaikuusb_la-haiku_usb_raw.lo \
+ libhaikuusb_la-haiku_usb_backend.lo \
+ libhaikuusb_la-haiku_pollfs.lo
+libhaikuusb_la_OBJECTS = $(am_libhaikuusb_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo " CXX " $@;
+am__v_CXX_1 =
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo " CXXLD " $@;
+am__v_CXXLD_1 =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(libhaikuusb_la_SOURCES)
+DIST_SOURCES = $(libhaikuusb_la_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
+am__DIST_COMMON = $(srcdir)/Makefile.in compile config.guess \
+ config.sub depcomp install-sh ltmain.sh missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects
+noinst_LTLIBRARIES = libhaikuusb.la
+libhaikuusb_la_CPPFLAGS = $(AM_CPPFLAGS) -I$(srcdir)/.. -I$(srcdir)/../.. -I$(srcdir)/../../.. -I$(srcdir)/../../../..
+libhaikuusb_la_SOURCES = haiku_usb_raw.cpp haiku_usb_backend.cpp haiku_pollfs.cpp haiku_usb_raw.h haiku_usb.h
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .lo .o .obj
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+ @list='$(noinst_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+
+libhaikuusb.la: $(libhaikuusb_la_OBJECTS) $(libhaikuusb_la_DEPENDENCIES) $(EXTRA_libhaikuusb_la_DEPENDENCIES)
+ $(AM_V_CXXLD)$(CXXLINK) $(libhaikuusb_la_OBJECTS) $(libhaikuusb_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhaikuusb_la-haiku_pollfs.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhaikuusb_la-haiku_usb_backend.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhaikuusb_la-haiku_usb_raw.Plo@am__quote@
+
+.cpp.o:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cpp.lo:
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+libhaikuusb_la-haiku_usb_raw.lo: haiku_usb_raw.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libhaikuusb_la-haiku_usb_raw.lo -MD -MP -MF $(DEPDIR)/libhaikuusb_la-haiku_usb_raw.Tpo -c -o libhaikuusb_la-haiku_usb_raw.lo `test -f 'haiku_usb_raw.cpp' || echo '$(srcdir)/'`haiku_usb_raw.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libhaikuusb_la-haiku_usb_raw.Tpo $(DEPDIR)/libhaikuusb_la-haiku_usb_raw.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='haiku_usb_raw.cpp' object='libhaikuusb_la-haiku_usb_raw.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libhaikuusb_la-haiku_usb_raw.lo `test -f 'haiku_usb_raw.cpp' || echo '$(srcdir)/'`haiku_usb_raw.cpp
+
+libhaikuusb_la-haiku_usb_backend.lo: haiku_usb_backend.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libhaikuusb_la-haiku_usb_backend.lo -MD -MP -MF $(DEPDIR)/libhaikuusb_la-haiku_usb_backend.Tpo -c -o libhaikuusb_la-haiku_usb_backend.lo `test -f 'haiku_usb_backend.cpp' || echo '$(srcdir)/'`haiku_usb_backend.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libhaikuusb_la-haiku_usb_backend.Tpo $(DEPDIR)/libhaikuusb_la-haiku_usb_backend.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='haiku_usb_backend.cpp' object='libhaikuusb_la-haiku_usb_backend.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libhaikuusb_la-haiku_usb_backend.lo `test -f 'haiku_usb_backend.cpp' || echo '$(srcdir)/'`haiku_usb_backend.cpp
+
+libhaikuusb_la-haiku_pollfs.lo: haiku_pollfs.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libhaikuusb_la-haiku_pollfs.lo -MD -MP -MF $(DEPDIR)/libhaikuusb_la-haiku_pollfs.Tpo -c -o libhaikuusb_la-haiku_pollfs.lo `test -f 'haiku_pollfs.cpp' || echo '$(srcdir)/'`haiku_pollfs.cpp
+@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libhaikuusb_la-haiku_pollfs.Tpo $(DEPDIR)/libhaikuusb_la-haiku_pollfs.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='haiku_pollfs.cpp' object='libhaikuusb_la-haiku_pollfs.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libhaikuusb_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libhaikuusb_la-haiku_pollfs.lo `test -f 'haiku_pollfs.cpp' || echo '$(srcdir)/'`haiku_pollfs.cpp
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
+ clean-cscope clean-generic clean-libtool \
+ clean-noinstLTLIBRARIES cscope cscopelist-am ctags ctags-am \
+ dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
+ dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-compile distclean-generic distclean-libtool \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
--- /dev/null
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright 1992-2015 Free Software Foundation, Inc.
+
+timestamp='2015-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2015 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval $set_cc_for_build
+ cat <<-EOF > $dummy.c
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+ ;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW64*:*)
+ echo ${UNAME_MACHINE}-pc-mingw64
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ *:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ cris:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ crisv32:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ frv:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ ;;
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-${LIBC}
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-${LIBC}
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-${LIBC}
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ exit ;;
+ x86_64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ eval $set_cc_for_build
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright 1992-2015 Free Software Foundation, Inc.
+
+timestamp='2015-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2015 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze*)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
+ | c4x | c8051 | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | epiphany \
+ | fido | fr30 | frv | ft32 \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | k1om \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 | nios2eb | nios2el \
+ | ns16k | ns32k \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | riscv32 | riscv64 \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | k1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | or1k*-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | visium-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze*)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
+ mingw32)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i686-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* | -plan9* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for haikuusb 1.0.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='haikuusb'
+PACKAGE_TARNAME='haikuusb'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='haikuusb 1.0'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_maintainer_mode
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+enable_dependency_tracking
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+CXX
+CXXFLAGS
+CCC
+CXXCPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures haikuusb 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/haikuusb]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of haikuusb 1.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --disable-libtool-lock avoid locking (might break parallel builds)
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ CXXCPP C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+haikuusb configure 1.0
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by haikuusb $as_me 1.0, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version='1.15'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='haikuusb'
+ VERSION='1.0'
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+
+
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+ _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec_CXX='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' ${wl}-bernotok'
+ allow_undefined_flag_CXX=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
+ archive_cmds_need_lc_CXX=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX=' '
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=yes
+ file_list_spec_CXX='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+ enable_shared_with_static_runtimes_CXX=yes
+ # Don't use ranlib
+ old_postinstall_cmds_CXX='chmod 644 $oldlib'
+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+
+ else
+ ld_shlibs_CXX=no
+ fi
+
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ ld_shlibs_CXX=no
+ ;;
+
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ ld_shlibs_CXX=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
+
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='${wl}-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='${wl}-z,text'
+ allow_undefined_flag_CXX='${wl}-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ GCC_CXX="$GXX"
+ LD_CXX="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_CXX"; then
+ compiler_lib_search_path_CXX="${prev}${p}"
+ else
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_CXX"; then
+ postdeps_CXX="${prev}${p}"
+ else
+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects_CXX"; then
+ predep_objects_CXX="$p"
+ else
+ predep_objects_CXX="$predep_objects_CXX $p"
+ fi
+ else
+ if test -z "$postdep_objects_CXX"; then
+ postdep_objects_CXX="$p"
+ else
+ postdep_objects_CXX="$postdep_objects_CXX $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ predep_objects_CXX=
+ postdep_objects_CXX=
+ postdeps_CXX=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic_CXX='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ lt_prog_compiler_pic_CXX=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic_CXX=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[4-9]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ else
+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ lt_prog_compiler_pic_CXX='+Z'
+ fi
+ ;;
+ aCC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ lt_prog_compiler_pic_CXX='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ lt_prog_compiler_wl_CXX='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ lt_prog_compiler_pic_CXX='-pic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ lt_prog_compiler_can_build_shared_CXX=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works_CXX=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+ case $lt_prog_compiler_pic_CXX in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+ esac
+else
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+ :
+else
+ lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ ;;
+ esac
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc_CXX=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds_CXX in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_CXX" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+ test "$hardcode_minus_L_CXX" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink ||
+ test "$inherit_rpath_CXX" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_files="$ac_config_files Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by haikuusb $as_me 1.0, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+haikuusb config.status 1.0
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="CXX "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
--- /dev/null
+AC_INIT([haikuusb], [1.0])
+AM_INIT_AUTOMAKE([no-define foreign])
+AM_MAINTAINER_MODE
+LT_INIT
+AC_PROG_CXX
+AC_CONFIG_FILES([Makefile])
+AC_CONFIG_MACRO_DIR([m4])
+AC_OUTPUT
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\' :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+/*
+ * Copyright 2007-2008, Haiku Inc. All rights reserved.
+ * Distributed under the terms of the MIT License.
+ *
+ * Authors:
+ * Michael Lotz <mmlr@mlotz.ch>
+ */
+
+#include "haiku_usb.h"
+#include <cstdio>
+#include <Directory.h>
+#include <Entry.h>
+#include <Looper.h>
+#include <Messenger.h>
+#include <Node.h>
+#include <NodeMonitor.h>
+#include <Path.h>
+#include <cstring>
+
+class WatchedEntry {
+public:
+ WatchedEntry(BMessenger*, entry_ref*);
+ ~WatchedEntry();
+ bool EntryCreated(entry_ref* ref);
+ bool EntryRemoved(ino_t node);
+ bool InitCheck();
+
+private:
+ BMessenger* fMessenger;
+ node_ref fNode;
+ bool fIsDirectory;
+ USBDevice* fDevice;
+ WatchedEntry* fEntries;
+ WatchedEntry* fLink;
+ bool fInitCheck;
+};
+
+
+class RosterLooper : public BLooper {
+public:
+ RosterLooper(USBRoster*);
+ void Stop();
+ virtual void MessageReceived(BMessage*);
+ bool InitCheck();
+
+private:
+ USBRoster* fRoster;
+ WatchedEntry* fRoot;
+ BMessenger* fMessenger;
+ bool fInitCheck;
+};
+
+
+WatchedEntry::WatchedEntry(BMessenger* messenger, entry_ref* ref)
+ : fMessenger(messenger),
+ fIsDirectory(false),
+ fDevice(NULL),
+ fEntries(NULL),
+ fLink(NULL),
+ fInitCheck(false)
+{
+ BEntry entry(ref);
+ entry.GetNodeRef(&fNode);
+
+ BDirectory directory;
+ if (entry.IsDirectory() && directory.SetTo(ref) >= B_OK) {
+
+ fIsDirectory = true;
+
+ while (directory.GetNextEntry(&entry) >= B_OK) {
+ if (entry.GetRef(ref) < B_OK)
+ continue;
+
+ WatchedEntry* child = new(std::nothrow) WatchedEntry(fMessenger, ref);
+ if (child == NULL)
+ continue;
+ if (child->InitCheck() == false)
+ {
+ delete child;
+ continue;
+ }
+
+
+ child->fLink = fEntries;
+ fEntries = child;
+ }
+
+ watch_node(&fNode, B_WATCH_DIRECTORY, *fMessenger);
+
+ } else {
+ if (strncmp(ref->name, "raw", 3) == 0)
+ return;
+
+ BPath path, parent_path;
+ entry.GetPath(&path);
+ fDevice = new(std::nothrow) USBDevice(path.Path());
+ if (fDevice != NULL && fDevice->InitCheck() == true) {
+ // Add this new device to each active context's device list
+ struct libusb_context *ctx;
+ unsigned long session_id = (unsigned long)&fDevice;
+
+ usbi_mutex_lock(&active_contexts_lock);
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+
+ struct libusb_device* dev = usbi_get_device_by_session_id(ctx, session_id);
+ if (dev) {
+ usbi_dbg("using previously allocated device with location %lu", session_id);
+ libusb_unref_device(dev);
+ continue;
+ }
+ usbi_dbg("allocating new device with location %lu" ,session_id);
+ dev = usbi_alloc_device(ctx, session_id);
+ if (!dev) {
+ usbi_dbg("device allocation failed");
+ continue;
+ }
+ *((USBDevice**)dev->os_priv) = fDevice;
+
+ // Calculate pseudo-device-address
+ int addr,tmp;
+ if (strcmp(path.Leaf(), "hub") == 0)
+ {
+ tmp=100; //Random Number
+ }
+ else
+ {
+ sscanf(path.Leaf(), "%d", &tmp);
+ }
+ addr = tmp + 1;
+ path.GetParent(&parent_path);
+ while(strcmp(parent_path.Leaf(),"usb") != 0)
+ {
+ sscanf(parent_path.Leaf(), "%d", &tmp);
+ addr += tmp + 1;
+ parent_path.GetParent(&parent_path);
+ }
+ sscanf(path.Path(), "/dev/bus/usb/%d", &dev->bus_number);
+ (dev->device_address) = addr - (dev->bus_number + 1);
+
+ if(usbi_sanitize_device(dev) < 0)
+ {
+ usbi_dbg("device sanitization failed");
+ libusb_unref_device(dev);
+ continue;
+ }
+ usbi_connect_device(dev);
+ }
+ usbi_mutex_unlock(&active_contexts_lock);
+ } else if (fDevice) {
+ delete fDevice;
+ fDevice = NULL;
+ return;
+ }
+ }
+ fInitCheck = true;
+}
+
+
+WatchedEntry::~WatchedEntry()
+{
+ if (fIsDirectory) {
+ watch_node(&fNode, B_STOP_WATCHING, *fMessenger);
+
+ WatchedEntry* child = fEntries;
+ while (child) {
+ WatchedEntry *next = child->fLink;
+ delete child;
+ child = next;
+ }
+ }
+
+ if (fDevice) {
+ // Remove this device from each active context's device list
+ struct libusb_context *ctx;
+ struct libusb_device *dev;
+ unsigned long session_id = (unsigned long)&fDevice;
+
+ usbi_mutex_lock(&active_contexts_lock);
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+ dev = usbi_get_device_by_session_id (ctx, session_id);
+ if (dev != NULL) {
+ usbi_disconnect_device (dev);
+ libusb_unref_device(dev);
+ } else {
+ usbi_dbg("device with location %lu not found", session_id);
+ }
+ }
+ usbi_mutex_static_unlock(&active_contexts_lock);
+ delete fDevice;
+ }
+}
+
+
+bool
+WatchedEntry::EntryCreated(entry_ref *ref)
+{
+ if (!fIsDirectory)
+ return false;
+
+ if (ref->directory != fNode.node) {
+ WatchedEntry* child = fEntries;
+ while (child) {
+ if (child->EntryCreated(ref))
+ return true;
+ child = child->fLink;
+ }
+ return false;
+ }
+
+ WatchedEntry* child = new(std::nothrow) WatchedEntry(fMessenger, ref);
+ if (child == NULL)
+ return false;
+ child->fLink = fEntries;
+ fEntries = child;
+ return true;
+}
+
+
+bool
+WatchedEntry::EntryRemoved(ino_t node)
+{
+ if (!fIsDirectory)
+ return false;
+
+ WatchedEntry* child = fEntries;
+ WatchedEntry* lastChild = NULL;
+ while (child) {
+ if (child->fNode.node == node) {
+ if (lastChild)
+ lastChild->fLink = child->fLink;
+ else
+ fEntries = child->fLink;
+ delete child;
+ return true;
+ }
+
+ if (child->EntryRemoved(node))
+ return true;
+
+ lastChild = child;
+ child = child->fLink;
+ }
+ return false;
+}
+
+
+bool
+WatchedEntry::InitCheck()
+{
+ return fInitCheck;
+}
+
+
+RosterLooper::RosterLooper(USBRoster* roster)
+ : BLooper("LibusbRoster Looper"),
+ fRoster(roster),
+ fRoot(NULL),
+ fMessenger(NULL),
+ fInitCheck(false)
+{
+ BEntry entry("/dev/bus/usb");
+ if (!entry.Exists()) {
+ usbi_err(NULL,"usb_raw not published");
+ return;
+ }
+
+ Run();
+ fMessenger = new(std::nothrow) BMessenger(this);
+ if (fMessenger == NULL)
+ {
+ usbi_err(NULL,"error creating BMessenger object");
+ return;
+ }
+
+ if(Lock()) {
+ entry_ref ref;
+ entry.GetRef(&ref);
+ fRoot = new(std::nothrow) WatchedEntry(fMessenger, &ref);
+ Unlock();
+ if (fRoot == NULL)
+ {
+ return;
+ }
+ if (fRoot->InitCheck() == false)
+ {
+ delete fRoot;
+ return;
+ }
+ }
+ fInitCheck = true;
+}
+
+
+void
+RosterLooper::Stop()
+{
+ Lock();
+ delete fRoot;
+ delete fMessenger;
+ Quit();
+}
+
+
+void
+RosterLooper::MessageReceived(BMessage *message)
+{
+ int32 opcode;
+ if (message->FindInt32("opcode", &opcode) < B_OK)
+ return;
+
+ switch (opcode) {
+ case B_ENTRY_CREATED: {
+ dev_t device;
+ ino_t directory;
+ const char* name;
+ if (message->FindInt32("device", &device) < B_OK
+ || message->FindInt64("directory", &directory) < B_OK
+ || message->FindString("name", &name) < B_OK)
+ break;
+
+ entry_ref ref(device, directory, name);
+ fRoot->EntryCreated(&ref);
+ break;
+ }
+ case B_ENTRY_REMOVED: {
+ ino_t node;
+ if (message->FindInt64("node", &node) < B_OK)
+ break;
+ fRoot->EntryRemoved(node);
+ break;
+ }
+ }
+}
+
+
+bool
+RosterLooper::InitCheck()
+{
+ return fInitCheck;
+}
+
+
+USBRoster::USBRoster()
+ : fLooper(NULL)
+{
+}
+
+
+USBRoster::~USBRoster()
+{
+ Stop();
+}
+
+
+int
+USBRoster::Start()
+{
+ if(fLooper)
+ return LIBUSB_SUCCESS;
+
+ fLooper = new(std::nothrow) RosterLooper(this);
+ if (fLooper == NULL || ((RosterLooper*)fLooper)->InitCheck() == false)
+ return LIBUSB_ERROR_OTHER;
+ return LIBUSB_SUCCESS;
+}
+
+
+void
+USBRoster::Stop()
+{
+ if(!fLooper)
+ return;
+
+ ((RosterLooper *)fLooper)->Stop();
+ fLooper = NULL;
+}
+
+
--- /dev/null
+/*
+ * Haiku Backend for libusb
+ * Copyright © 2014 Akshay Jaggi <akshay1994.leo@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <List.h>
+#include <Locker.h>
+#include <Autolock.h>
+#include <USBKit.h>
+#include <map>
+#include "libusbi.h"
+#include "haiku_usb_raw.h"
+
+using namespace std;
+
+class USBDevice;
+class USBDeviceHandle;
+class USBTransfer;
+
+class USBDevice {
+public:
+ USBDevice(const char *);
+ virtual ~USBDevice();
+ const char* Location() const;
+ uint8 CountConfigurations() const;
+ const usb_device_descriptor* Descriptor() const;
+ const usb_configuration_descriptor* ConfigurationDescriptor(uint32) const;
+ const usb_configuration_descriptor* ActiveConfiguration() const;
+ uint8 EndpointToIndex(uint8) const;
+ uint8 EndpointToInterface(uint8) const;
+ int ClaimInterface(int);
+ int ReleaseInterface(int);
+ int CheckInterfacesFree(int);
+ int SetActiveConfiguration(int);
+ int ActiveConfigurationIndex() const;
+ bool InitCheck();
+private:
+ int Initialise();
+ unsigned int fClaimedInterfaces; // Max Interfaces can be 32. Using a bitmask
+ usb_device_descriptor fDeviceDescriptor;
+ unsigned char** fConfigurationDescriptors;
+ int fActiveConfiguration;
+ char* fPath;
+ map<uint8,uint8> fConfigToIndex;
+ map<uint8,uint8>* fEndpointToIndex;
+ map<uint8,uint8>* fEndpointToInterface;
+ bool fInitCheck;
+};
+
+class USBDeviceHandle {
+public:
+ USBDeviceHandle(USBDevice* dev);
+ virtual ~USBDeviceHandle();
+ int ClaimInterface(int);
+ int ReleaseInterface(int);
+ int SetConfiguration(int);
+ int SetAltSetting(int,int);
+ status_t SubmitTransfer(struct usbi_transfer*);
+ status_t CancelTransfer(USBTransfer*);
+ bool InitCheck();
+private:
+ int fRawFD;
+ static status_t TransfersThread(void *);
+ void TransfersWorker();
+ USBDevice* fUSBDevice;
+ unsigned int fClaimedInterfaces;
+ BList fTransfers;
+ BLocker fTransfersLock;
+ sem_id fTransfersSem;
+ thread_id fTransfersThread;
+ bool fInitCheck;
+};
+
+class USBTransfer {
+public:
+ USBTransfer(struct usbi_transfer*,USBDevice*);
+ virtual ~USBTransfer();
+ void Do(int);
+ struct usbi_transfer* UsbiTransfer();
+ void SetCancelled();
+ bool IsCancelled();
+private:
+ struct usbi_transfer* fUsbiTransfer;
+ struct libusb_transfer* fLibusbTransfer;
+ USBDevice* fUSBDevice;
+ BLocker fStatusLock;
+ bool fCancelled;
+};
+
+class USBRoster {
+public:
+ USBRoster();
+ virtual ~USBRoster();
+ int Start();
+ void Stop();
+private:
+ void* fLooper;
+};
--- /dev/null
+/*
+ * Haiku Backend for libusb
+ * Copyright © 2014 Akshay Jaggi <akshay1994.leo@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <new>
+#include <vector>
+
+#include "haiku_usb.h"
+
+int _errno_to_libusb(int status)
+{
+ return status;
+}
+
+USBTransfer::USBTransfer(struct usbi_transfer* itransfer, USBDevice* device)
+{
+ fUsbiTransfer=itransfer;
+ fLibusbTransfer=USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ fUSBDevice=device;
+ fCancelled=false;
+}
+
+USBTransfer::~USBTransfer()
+{
+}
+
+struct usbi_transfer*
+USBTransfer::UsbiTransfer()
+{
+ return fUsbiTransfer;
+}
+
+void
+USBTransfer::SetCancelled()
+{
+ fCancelled=true;
+}
+
+bool
+USBTransfer::IsCancelled()
+{
+ return fCancelled;
+}
+
+void
+USBTransfer::Do(int fRawFD)
+{
+ switch(fLibusbTransfer->type)
+ {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ {
+ struct libusb_control_setup* setup=(struct libusb_control_setup*)fLibusbTransfer->buffer;
+ usb_raw_command command;
+ command.control.request_type=setup->bmRequestType;
+ command.control.request=setup->bRequest;
+ command.control.value=setup->wValue;
+ command.control.index=setup->wIndex;
+ command.control.length=setup->wLength;
+ command.control.data=fLibusbTransfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
+ if(fCancelled)
+ {
+ break;
+ }
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_CONTROL_TRANSFER,&command,
+ sizeof(command)) || command.control.status!=B_USB_RAW_STATUS_SUCCESS) {
+ fUsbiTransfer->transferred=-1;
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"failed control transfer");
+ break;
+ }
+ fUsbiTransfer->transferred=command.control.length;
+ }
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ {
+ usb_raw_command command;
+ command.transfer.interface=fUSBDevice->EndpointToInterface(fLibusbTransfer->endpoint);
+ command.transfer.endpoint=fUSBDevice->EndpointToIndex(fLibusbTransfer->endpoint);
+ command.transfer.data=fLibusbTransfer->buffer;
+ command.transfer.length=fLibusbTransfer->length;
+ if(fCancelled)
+ {
+ break;
+ }
+ if(fLibusbTransfer->type==LIBUSB_TRANSFER_TYPE_BULK)
+ {
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_BULK_TRANSFER,&command,
+ sizeof(command)) || command.transfer.status!=B_USB_RAW_STATUS_SUCCESS) {
+ fUsbiTransfer->transferred=-1;
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"failed bulk transfer");
+ break;
+ }
+ }
+ else
+ {
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_INTERRUPT_TRANSFER,&command,
+ sizeof(command)) || command.transfer.status!=B_USB_RAW_STATUS_SUCCESS) {
+ fUsbiTransfer->transferred=-1;
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"failed interrupt transfer");
+ break;
+ }
+ }
+ fUsbiTransfer->transferred=command.transfer.length;
+ }
+ break;
+ // IsochronousTransfers not tested
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ {
+ usb_raw_command command;
+ command.isochronous.interface=fUSBDevice->EndpointToInterface(fLibusbTransfer->endpoint);
+ command.isochronous.endpoint=fUSBDevice->EndpointToIndex(fLibusbTransfer->endpoint);
+ command.isochronous.data=fLibusbTransfer->buffer;
+ command.isochronous.length=fLibusbTransfer->length;
+ command.isochronous.packet_count=fLibusbTransfer->num_iso_packets;
+ int i=0;
+ usb_iso_packet_descriptor *packetDescriptors = new usb_iso_packet_descriptor[fLibusbTransfer->num_iso_packets];
+ for (i=0; i<fLibusbTransfer->num_iso_packets; i++)
+ {
+ if((int16)(fLibusbTransfer->iso_packet_desc[i]).length!=(fLibusbTransfer->iso_packet_desc[i]).length)
+ {
+ fUsbiTransfer->transferred=-1;
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"failed isochronous transfer");
+ break;
+ }
+ packetDescriptors[i].request_length=(int16)(fLibusbTransfer->iso_packet_desc[i]).length;
+ }
+ if(i<fLibusbTransfer->num_iso_packets)
+ {
+ break; // TODO Handle this error
+ }
+ command.isochronous.packet_descriptors=packetDescriptors;
+ if(fCancelled)
+ {
+ break;
+ }
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_ISOCHRONOUS_TRANSFER,&command,
+ sizeof(command)) || command.isochronous.status!=B_USB_RAW_STATUS_SUCCESS) {
+ fUsbiTransfer->transferred=-1;
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"failed isochronous transfer");
+ break;
+ }
+ for (i=0; i<fLibusbTransfer->num_iso_packets; i++)
+ {
+ (fLibusbTransfer->iso_packet_desc[i]).actual_length=packetDescriptors[i].actual_length;
+ switch(packetDescriptors[i].status)
+ {
+ case B_OK: (fLibusbTransfer->iso_packet_desc[i]).status=LIBUSB_TRANSFER_COMPLETED;
+ break;
+ default: (fLibusbTransfer->iso_packet_desc[i]).status=LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+ }
+ delete[] packetDescriptors;
+ // Do we put the length of transfer here, for isochronous transfers?
+ fUsbiTransfer->transferred=command.transfer.length;
+ }
+ break;
+ default:
+ usbi_err(TRANSFER_CTX(fLibusbTransfer),"Unknown type of transfer");
+ }
+}
+
+bool
+USBDeviceHandle::InitCheck()
+{
+ return fInitCheck;
+}
+
+status_t
+USBDeviceHandle::TransfersThread(void* self)
+{
+ USBDeviceHandle* handle = (USBDeviceHandle*)self;
+ handle->TransfersWorker();
+ return B_OK;
+}
+
+void
+USBDeviceHandle::TransfersWorker()
+{
+ while(true)
+ {
+ status_t status = acquire_sem(fTransfersSem);
+ if(status== B_BAD_SEM_ID)
+ break;
+ if(status == B_INTERRUPTED)
+ continue;
+ fTransfersLock.Lock();
+ USBTransfer* fPendingTransfer= (USBTransfer*) fTransfers.RemoveItem((int32)0);
+ fTransfersLock.Unlock();
+ fPendingTransfer->Do(fRawFD);
+ usbi_signal_transfer_completion(fPendingTransfer->UsbiTransfer());
+ }
+}
+
+status_t
+USBDeviceHandle::SubmitTransfer(struct usbi_transfer* itransfer)
+{
+ USBTransfer* transfer = new USBTransfer(itransfer,fUSBDevice);
+ *((USBTransfer**)usbi_transfer_get_os_priv(itransfer))=transfer;
+ BAutolock locker(fTransfersLock);
+ fTransfers.AddItem(transfer);
+ release_sem(fTransfersSem);
+ return LIBUSB_SUCCESS;
+}
+
+status_t
+USBDeviceHandle::CancelTransfer(USBTransfer* transfer)
+{
+ transfer->SetCancelled();
+ fTransfersLock.Lock();
+ bool removed = fTransfers.RemoveItem(transfer);
+ fTransfersLock.Unlock();
+ if(removed)
+ {
+ usbi_signal_transfer_completion(transfer->UsbiTransfer());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+USBDeviceHandle::USBDeviceHandle(USBDevice* dev)
+ :
+ fTransfersThread(-1),
+ fUSBDevice(dev),
+ fClaimedInterfaces(0),
+ fInitCheck(false)
+{
+ fRawFD=open(dev->Location(), O_RDWR | O_CLOEXEC);
+ if(fRawFD < 0)
+ {
+ usbi_err(NULL,"failed to open device");
+ return;
+ }
+ fTransfersSem = create_sem(0, "Transfers Queue Sem");
+ fTransfersThread = spawn_thread(TransfersThread,"Transfer Worker",B_NORMAL_PRIORITY, this);
+ resume_thread(fTransfersThread);
+ fInitCheck = true;
+}
+
+USBDeviceHandle::~USBDeviceHandle()
+{
+ if(fRawFD>0)
+ close(fRawFD);
+ for(int i=0; i<32; i++)
+ {
+ if(fClaimedInterfaces&(1<<i))
+ ReleaseInterface(i);
+ }
+ delete_sem(fTransfersSem);
+ if(fTransfersThread>0)
+ wait_for_thread(fTransfersThread, NULL);
+}
+
+int
+USBDeviceHandle::ClaimInterface(int inumber)
+{
+ int status=fUSBDevice->ClaimInterface(inumber);
+ if(status==LIBUSB_SUCCESS)
+ {
+ fClaimedInterfaces|=(1<<inumber);
+ }
+ return status;
+}
+
+int
+USBDeviceHandle::ReleaseInterface(int inumber)
+{
+ fUSBDevice->ReleaseInterface(inumber);
+ fClaimedInterfaces&=(!(1<<inumber));
+ return LIBUSB_SUCCESS;
+}
+
+int
+USBDeviceHandle::SetConfiguration(int config)
+{
+ int config_index=fUSBDevice->CheckInterfacesFree(config);
+ if(config_index==LIBUSB_ERROR_BUSY || config_index==LIBUSB_ERROR_NOT_FOUND)
+ return config_index;
+
+ usb_raw_command command;
+ command.config.config_index=config_index;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_SET_CONFIGURATION,&command,
+ sizeof(command)) || command.config.status != B_USB_RAW_STATUS_SUCCESS) {
+ return _errno_to_libusb(command.config.status);
+ }
+ fUSBDevice->SetActiveConfiguration(config_index);
+ return LIBUSB_SUCCESS;
+}
+
+int
+USBDeviceHandle::SetAltSetting(int inumber, int alt)
+{
+ usb_raw_command command;
+ command.alternate.config_index=fUSBDevice->ActiveConfigurationIndex();
+ command.alternate.interface_index=inumber;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_GET_ACTIVE_ALT_INTERFACE_INDEX,&command,
+ sizeof(command)) || command.alternate.status!=B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"Error retrieving active alternate interface");
+ return _errno_to_libusb(command.alternate.status);
+ }
+ if(command.alternate.alternate_info == alt)
+ {
+ usbi_dbg("Setting alternate interface successful");
+ return LIBUSB_SUCCESS;
+ }
+ command.alternate.alternate_info = alt;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_SET_ALT_INTERFACE,&command, //IF IOCTL FAILS DEVICE DISONNECTED PROBABLY
+ sizeof(command)) || command.alternate.status!=B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"Error setting alternate interface");
+ return _errno_to_libusb(command.alternate.status);
+ }
+ usbi_dbg("Setting alternate interface successful");
+ return LIBUSB_SUCCESS;
+}
+
+
+USBDevice::USBDevice(const char * path)
+ :
+ fPath(NULL),
+ fActiveConfiguration(0), //0?
+ fConfigurationDescriptors(NULL),
+ fClaimedInterfaces(0),
+ fEndpointToIndex(NULL),
+ fEndpointToInterface(NULL),
+ fInitCheck(false)
+{
+ fPath=strdup(path);
+ Initialise();
+}
+
+USBDevice::~USBDevice()
+{
+ free(fPath);
+ if (fConfigurationDescriptors)
+ {
+ for(int i=0;i<fDeviceDescriptor.num_configurations;i++)
+ {
+ if (fConfigurationDescriptors[i])
+ delete fConfigurationDescriptors[i];
+ }
+ delete[] fConfigurationDescriptors;
+ }
+ if (fEndpointToIndex)
+ delete[] fEndpointToIndex;
+ if (fEndpointToInterface)
+ delete[] fEndpointToInterface;
+}
+
+bool
+USBDevice::InitCheck()
+{
+ return fInitCheck;
+}
+
+const char*
+USBDevice::Location() const
+{
+ return fPath;
+}
+
+uint8
+USBDevice::CountConfigurations() const
+{
+ return fDeviceDescriptor.num_configurations;
+}
+
+const usb_device_descriptor*
+USBDevice::Descriptor() const
+{
+ return &fDeviceDescriptor;
+}
+
+const usb_configuration_descriptor*
+USBDevice::ConfigurationDescriptor(uint32 index) const
+{
+ if(index>CountConfigurations())
+ return NULL;
+ return (usb_configuration_descriptor*) fConfigurationDescriptors[index];
+}
+
+const usb_configuration_descriptor*
+USBDevice::ActiveConfiguration() const
+{
+ return (usb_configuration_descriptor*) fConfigurationDescriptors[fActiveConfiguration];
+}
+
+int
+USBDevice::ActiveConfigurationIndex() const
+{
+ return fActiveConfiguration;
+}
+
+int USBDevice::ClaimInterface(int interface)
+{
+ if(interface>ActiveConfiguration()->number_interfaces)
+ {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ if((fClaimedInterfaces & (1<<interface)) !=0 )
+ return LIBUSB_ERROR_BUSY;
+ fClaimedInterfaces|=(1<<interface);
+ return LIBUSB_SUCCESS;
+}
+
+int USBDevice::ReleaseInterface(int interface)
+{
+ fClaimedInterfaces&=(!(1<<interface));
+ return LIBUSB_SUCCESS;
+}
+
+int
+USBDevice::CheckInterfacesFree(int config)
+{
+ if(fConfigToIndex.count(config)==0)
+ return LIBUSB_ERROR_NOT_FOUND;
+ if(fClaimedInterfaces==0)
+ return fConfigToIndex[(uint8)config];
+ return LIBUSB_ERROR_BUSY;
+}
+
+int
+USBDevice::SetActiveConfiguration(int config_index)
+{
+ fActiveConfiguration=config_index;
+ return LIBUSB_SUCCESS;
+}
+
+uint8
+USBDevice::EndpointToIndex(uint8 address) const
+{
+ return fEndpointToIndex[fActiveConfiguration][address];
+}
+
+uint8
+USBDevice::EndpointToInterface(uint8 address) const
+{
+ return fEndpointToInterface[fActiveConfiguration][address];
+}
+
+int
+USBDevice::Initialise() //Do we need more error checking, etc? How to report?
+{
+ int fRawFD=open(fPath, O_RDWR | O_CLOEXEC);
+ if(fRawFD < 0)
+ return B_ERROR;
+
+ usb_raw_command command;
+ command.device.descriptor = &fDeviceDescriptor;
+ if(ioctl(fRawFD, B_USB_RAW_COMMAND_GET_DEVICE_DESCRIPTOR, &command,
+ sizeof(command)) || command.device.status != B_USB_RAW_STATUS_SUCCESS) {
+ close(fRawFD);
+ return B_ERROR;
+ }
+
+ size_t size;
+ fConfigurationDescriptors = new(std::nothrow) unsigned char*[fDeviceDescriptor.num_configurations];
+ fEndpointToIndex = new(std::nothrow) map<uint8,uint8> [fDeviceDescriptor.num_configurations];
+ fEndpointToInterface = new(std::nothrow) map<uint8,uint8> [fDeviceDescriptor.num_configurations];
+ for( int i=0; i<fDeviceDescriptor.num_configurations; i++)
+ {
+ size=0;
+ usb_configuration_descriptor tmp_config;
+ command.config.descriptor = &tmp_config;
+ command.config.config_index = i;
+ if(ioctl(fRawFD, B_USB_RAW_COMMAND_GET_CONFIGURATION_DESCRIPTOR, &command,
+ sizeof(command)) || command.config.status != B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"failed retrieving configuration descriptor");
+ close(fRawFD);
+ return B_ERROR;
+ }
+ fConfigToIndex[tmp_config.configuration_value]=i;
+ fConfigurationDescriptors[i]=new(std::nothrow) unsigned char[tmp_config.total_length];
+ command.control.request_type=128;
+ command.control.request=6;
+ command.control.value=(2<<8)|i;
+ command.control.index=0;
+ command.control.length=tmp_config.total_length;
+ command.control.data=fConfigurationDescriptors[i];
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_CONTROL_TRANSFER,&command,
+ sizeof(command)) || command.control.status!=B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"failed retrieving full configuration descriptor");
+ close(fRawFD);
+ return B_ERROR;
+ }
+ for( int j=0;j<tmp_config.number_interfaces;j++)
+ {
+ command.alternate.config_index=i;
+ command.alternate.interface_index=j;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_GET_ALT_INTERFACE_COUNT, &command,
+ sizeof(command)) || command.config.status != B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"failed retrieving number of alternate interfaces");
+ close(fRawFD);
+ return B_ERROR;
+ }
+ int num_alternate=command.alternate.alternate_info;
+ for( int k=0;k<num_alternate;k++)
+ {
+ usb_interface_descriptor tmp_interface;
+ command.interface_etc.config_index=i;
+ command.interface_etc.interface_index=j;
+ command.interface_etc.alternate_index=k;
+ command.interface_etc.descriptor=&tmp_interface;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_GET_INTERFACE_DESCRIPTOR_ETC, &command,
+ sizeof(command)) || command.config.status != B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"failed retrieving interface descriptor");
+ close(fRawFD);
+ return B_ERROR;
+ }
+ for( int l=0;l<tmp_interface.num_endpoints;l++)
+ {
+ usb_endpoint_descriptor tmp_endpoint;
+ command.endpoint_etc.config_index=i;
+ command.endpoint_etc.interface_index=j;
+ command.endpoint_etc.alternate_index=k;
+ command.endpoint_etc.endpoint_index=l;
+ command.endpoint_etc.descriptor=&tmp_endpoint;
+ if(ioctl(fRawFD,B_USB_RAW_COMMAND_GET_ENDPOINT_DESCRIPTOR_ETC, &command,
+ sizeof(command)) || command.config.status != B_USB_RAW_STATUS_SUCCESS) {
+ usbi_err(NULL,"failed retrieving endpoint descriptor");
+ close(fRawFD);
+ return B_ERROR;
+ }
+ fEndpointToIndex[i][tmp_endpoint.endpoint_address]=l;
+ fEndpointToInterface[i][tmp_endpoint.endpoint_address]=j;
+ }
+ }
+ }
+ }
+ close(fRawFD);
+ fInitCheck = true;
+ return B_OK;
+}
--- /dev/null
+/*
+ * Haiku Backend for libusb
+ * Copyright © 2014 Akshay Jaggi <akshay1994.leo@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <new>
+#include <vector>
+
+#include "haiku_usb.h"
+
+USBRoster gUsbRoster;
+int32 gInitCount = 0;
+
+static int
+haiku_init(struct libusb_context* ctx)
+{
+ if (atomic_add(&gInitCount, 1) == 0)
+ {
+ return gUsbRoster.Start();
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static void
+haiku_exit(void)
+{
+ if (atomic_add(&gInitCount, -1) == 1)
+ gUsbRoster.Stop();
+}
+
+static int
+haiku_open(struct libusb_device_handle *dev_handle)
+{
+ USBDevice* dev=*((USBDevice**)dev_handle->dev->os_priv);
+ USBDeviceHandle *handle=new(std::nothrow) USBDeviceHandle(dev);
+ if (handle == NULL)
+ return LIBUSB_ERROR_NO_MEM;
+ if (handle->InitCheck() == false)
+ {
+ delete handle;
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ *((USBDeviceHandle**)dev_handle->os_priv)=handle;
+ return LIBUSB_SUCCESS;
+}
+
+static void
+haiku_close(struct libusb_device_handle *dev_handle)
+{
+ USBDeviceHandle * handle=*((USBDeviceHandle**)dev_handle->os_priv);
+ if(handle==NULL)
+ return;
+ delete handle;
+ *((USBDeviceHandle**)dev_handle->os_priv)=NULL;
+}
+
+static int
+haiku_get_device_descriptor(struct libusb_device *device, unsigned char* buffer, int *host_endian)
+{
+ USBDevice *dev = *((USBDevice**)(device->os_priv));
+ memcpy(buffer,dev->Descriptor(),DEVICE_DESC_LENGTH);
+ *host_endian=0;
+ return LIBUSB_SUCCESS;
+}
+
+static int
+haiku_get_active_config_descriptor(struct libusb_device *device, unsigned char *buffer, size_t len, int *host_endian)
+{
+ USBDevice *dev = *((USBDevice**)(device->os_priv));
+ const usb_configuration_descriptor* act_config = dev->ActiveConfiguration();
+ if(len>act_config->total_length)
+ {
+ return LIBUSB_ERROR_OVERFLOW;
+ }
+ memcpy(buffer,act_config,len);
+ *host_endian=0;
+ return LIBUSB_SUCCESS;
+}
+
+static int
+haiku_get_config_descriptor(struct libusb_device *device, uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian)
+{
+ USBDevice *dev = *((USBDevice**)(device->os_priv));
+ const usb_configuration_descriptor* config = dev->ConfigurationDescriptor(config_index);
+ if(config==NULL)
+ {
+ usbi_err(DEVICE_CTX(device),"failed getting configuration descriptor");
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ if(len>config->total_length)
+ len=config->total_length;
+ memcpy(buffer,(unsigned char*)config,len);
+ *host_endian=0;
+ return len;
+}
+
+static int
+haiku_set_configuration(struct libusb_device_handle *dev_handle, int config)
+{
+ USBDeviceHandle * handle= *((USBDeviceHandle**)dev_handle->os_priv);
+ return handle->SetConfiguration(config);
+}
+
+static int
+haiku_claim_interface(struct libusb_device_handle *dev_handle, int interface_number)
+{
+ USBDeviceHandle * handle=*((USBDeviceHandle**)dev_handle->os_priv);
+ return handle->ClaimInterface(interface_number);
+}
+
+static int
+haiku_set_altsetting(struct libusb_device_handle* dev_handle, int interface_number, int altsetting)
+{
+ USBDeviceHandle* handle = *((USBDeviceHandle**)dev_handle->os_priv);
+ return handle->SetAltSetting(interface_number, altsetting);
+}
+
+static int
+haiku_release_interface(struct libusb_device_handle *dev_handle, int interface_number)
+{
+ USBDeviceHandle * handle=*((USBDeviceHandle**)dev_handle->os_priv);
+ haiku_set_altsetting(dev_handle,interface_number,0);
+ return handle->ReleaseInterface(interface_number);
+}
+
+static int
+haiku_submit_transfer(struct usbi_transfer * itransfer)
+{
+ struct libusb_transfer* fLibusbTransfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ USBDeviceHandle * fDeviceHandle = *((USBDeviceHandle**)fLibusbTransfer->dev_handle->os_priv);
+ return fDeviceHandle->SubmitTransfer(itransfer);
+}
+
+static int
+haiku_cancel_transfer(struct usbi_transfer * itransfer)
+{
+ struct libusb_transfer* fLibusbTransfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ USBDeviceHandle * fDeviceHandle = *((USBDeviceHandle**)fLibusbTransfer->dev_handle->os_priv);
+ return fDeviceHandle->CancelTransfer(*((USBTransfer**)usbi_transfer_get_os_priv(itransfer)));
+}
+
+static void
+haiku_clear_transfer_priv(struct usbi_transfer * itransfer)
+{
+ USBTransfer* transfer=*((USBTransfer**)usbi_transfer_get_os_priv(itransfer));
+ delete transfer;
+ *((USBTransfer**)usbi_transfer_get_os_priv(itransfer))=NULL;
+}
+
+static int
+haiku_handle_transfer_completion(struct usbi_transfer * itransfer)
+{
+ USBTransfer* transfer=*((USBTransfer**)usbi_transfer_get_os_priv(itransfer));
+
+ usbi_mutex_lock(&itransfer->lock);
+ if(transfer->IsCancelled())
+ {
+ delete transfer;
+ *((USBTransfer**)usbi_transfer_get_os_priv(itransfer))=NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+ if (itransfer->transferred < 0)
+ itransfer->transferred = 0;
+ return usbi_handle_transfer_cancellation(itransfer);
+ }
+ libusb_transfer_status status = LIBUSB_TRANSFER_COMPLETED;
+ if(itransfer->transferred < 0)
+ {
+ usbi_err(ITRANSFER_CTX(itransfer), "error in transfer");
+ status = LIBUSB_TRANSFER_ERROR;
+ itransfer->transferred=0;
+ }
+ delete transfer;
+ *((USBTransfer**)usbi_transfer_get_os_priv(itransfer))=NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_completion(itransfer, status);
+}
+
+static int
+haiku_clock_gettime(int clkid, struct timespec *tp)
+{
+ if(clkid == USBI_CLOCK_REALTIME)
+ return clock_gettime(CLOCK_REALTIME, tp);
+ if(clkid == USBI_CLOCK_MONOTONIC)
+ return clock_gettime(CLOCK_MONOTONIC, tp);
+ return LIBUSB_ERROR_INVALID_PARAM;
+}
+
+const struct usbi_os_backend haiku_usb_raw_backend = {
+ /*.name =*/ "Haiku usbfs",
+ /*.caps =*/ 0,
+ /*.init =*/ haiku_init,
+ /*.exit =*/ haiku_exit,
+ /*.get_device_list =*/ NULL,
+ /*.hotplug_poll =*/ NULL,
+ /*.open =*/ haiku_open,
+ /*.close =*/ haiku_close,
+ /*.get_device_descriptor =*/ haiku_get_device_descriptor,
+ /*.get_active_config_descriptor =*/ haiku_get_active_config_descriptor,
+ /*.get_config_descriptor =*/ haiku_get_config_descriptor,
+ /*.get_config_descriptor_by_value =*/ NULL,
+
+
+ /*.get_configuration =*/ NULL,
+ /*.set_configuration =*/ haiku_set_configuration,
+ /*.claim_interface =*/ haiku_claim_interface,
+ /*.release_interface =*/ haiku_release_interface,
+
+ /*.set_interface_altsetting =*/ haiku_set_altsetting,
+ /*.clear_halt =*/ NULL,
+ /*.reset_device =*/ NULL,
+
+ /*.alloc_streams =*/ NULL,
+ /*.free_streams =*/ NULL,
+
+ /*.kernel_driver_active =*/ NULL,
+ /*.detach_kernel_driver =*/ NULL,
+ /*.attach_kernel_driver =*/ NULL,
+
+ /*.destroy_device =*/ NULL,
+
+ /*.submit_transfer =*/ haiku_submit_transfer,
+ /*.cancel_transfer =*/ haiku_cancel_transfer,
+ /*.clear_transfer_priv =*/ haiku_clear_transfer_priv,
+
+ /*.handle_events =*/ NULL,
+ /*.handle_transfer_completion =*/ haiku_handle_transfer_completion,
+
+ /*.clock_gettime =*/ haiku_clock_gettime,
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /*.get_timerfd_clockid =*/ NULL,
+#endif
+
+ /*.device_priv_size =*/ sizeof(USBDevice*),
+ /*.device_handle_priv_size =*/ sizeof(USBDeviceHandle*),
+ /*.transfer_priv_size =*/ sizeof(USBTransfer*),
+};
--- /dev/null
+/*
+ * Copyright 2006-2008, Haiku Inc. All rights reserved.
+ * Distributed under the terms of the MIT License.
+ */
+
+#ifndef _USB_RAW_H_
+#define _USB_RAW_H_
+
+#include <USB3.h>
+
+#define B_USB_RAW_PROTOCOL_VERSION 0x0015
+#define B_USB_RAW_ACTIVE_ALTERNATE 0xffffffff
+
+typedef enum {
+ B_USB_RAW_COMMAND_GET_VERSION = 0x1000,
+
+ B_USB_RAW_COMMAND_GET_DEVICE_DESCRIPTOR = 0x2000,
+ B_USB_RAW_COMMAND_GET_CONFIGURATION_DESCRIPTOR,
+ B_USB_RAW_COMMAND_GET_INTERFACE_DESCRIPTOR,
+ B_USB_RAW_COMMAND_GET_ENDPOINT_DESCRIPTOR,
+ B_USB_RAW_COMMAND_GET_STRING_DESCRIPTOR,
+ B_USB_RAW_COMMAND_GET_GENERIC_DESCRIPTOR,
+ B_USB_RAW_COMMAND_GET_ALT_INTERFACE_COUNT,
+ B_USB_RAW_COMMAND_GET_ACTIVE_ALT_INTERFACE_INDEX,
+ B_USB_RAW_COMMAND_GET_INTERFACE_DESCRIPTOR_ETC,
+ B_USB_RAW_COMMAND_GET_ENDPOINT_DESCRIPTOR_ETC,
+ B_USB_RAW_COMMAND_GET_GENERIC_DESCRIPTOR_ETC,
+
+ B_USB_RAW_COMMAND_SET_CONFIGURATION = 0x3000,
+ B_USB_RAW_COMMAND_SET_FEATURE,
+ B_USB_RAW_COMMAND_CLEAR_FEATURE,
+ B_USB_RAW_COMMAND_GET_STATUS,
+ B_USB_RAW_COMMAND_GET_DESCRIPTOR,
+ B_USB_RAW_COMMAND_SET_ALT_INTERFACE,
+
+ B_USB_RAW_COMMAND_CONTROL_TRANSFER = 0x4000,
+ B_USB_RAW_COMMAND_INTERRUPT_TRANSFER,
+ B_USB_RAW_COMMAND_BULK_TRANSFER,
+ B_USB_RAW_COMMAND_ISOCHRONOUS_TRANSFER
+} usb_raw_command_id;
+
+
+typedef enum {
+ B_USB_RAW_STATUS_SUCCESS = 0,
+
+ B_USB_RAW_STATUS_FAILED,
+ B_USB_RAW_STATUS_ABORTED,
+ B_USB_RAW_STATUS_STALLED,
+ B_USB_RAW_STATUS_CRC_ERROR,
+ B_USB_RAW_STATUS_TIMEOUT,
+
+ B_USB_RAW_STATUS_INVALID_CONFIGURATION,
+ B_USB_RAW_STATUS_INVALID_INTERFACE,
+ B_USB_RAW_STATUS_INVALID_ENDPOINT,
+ B_USB_RAW_STATUS_INVALID_STRING,
+
+ B_USB_RAW_STATUS_NO_MEMORY
+} usb_raw_command_status;
+
+
+typedef union {
+ struct {
+ status_t status;
+ } version;
+
+ struct {
+ status_t status;
+ usb_device_descriptor *descriptor;
+ } device;
+
+ struct {
+ status_t status;
+ usb_configuration_descriptor *descriptor;
+ uint32 config_index;
+ } config;
+
+ struct {
+ status_t status;
+ uint32 alternate_info;
+ uint32 config_index;
+ uint32 interface_index;
+ } alternate;
+
+ struct {
+ status_t status;
+ usb_interface_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ } interface;
+
+ struct {
+ status_t status;
+ usb_interface_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ uint32 alternate_index;
+ } interface_etc;
+
+ struct {
+ status_t status;
+ usb_endpoint_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ uint32 endpoint_index;
+ } endpoint;
+
+ struct {
+ status_t status;
+ usb_endpoint_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ uint32 alternate_index;
+ uint32 endpoint_index;
+ } endpoint_etc;
+
+ struct {
+ status_t status;
+ usb_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ uint32 generic_index;
+ size_t length;
+ } generic;
+
+ struct {
+ status_t status;
+ usb_descriptor *descriptor;
+ uint32 config_index;
+ uint32 interface_index;
+ uint32 alternate_index;
+ uint32 generic_index;
+ size_t length;
+ } generic_etc;
+
+ struct {
+ status_t status;
+ usb_string_descriptor *descriptor;
+ uint32 string_index;
+ size_t length;
+ } string;
+
+ struct {
+ status_t status;
+ uint8 type;
+ uint8 index;
+ uint16 language_id;
+ void *data;
+ size_t length;
+ } descriptor;
+
+ struct {
+ status_t status;
+ uint8 request_type;
+ uint8 request;
+ uint16 value;
+ uint16 index;
+ uint16 length;
+ void *data;
+ } control;
+
+ struct {
+ status_t status;
+ uint32 interface;
+ uint32 endpoint;
+ void *data;
+ size_t length;
+ } transfer;
+
+ struct {
+ status_t status;
+ uint32 interface;
+ uint32 endpoint;
+ void *data;
+ size_t length;
+ usb_iso_packet_descriptor *packet_descriptors;
+ uint32 packet_count;
+ } isochronous;
+} usb_raw_command;
+
+#endif // _USB_RAW_H_
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2013-12-25.23; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab=' '
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) is_target_a_directory=never;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call 'install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for 'test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ dstdir=`dirname "$dst"`
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ set -f
+ set fnord $dstdir
+ shift
+ set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ set +f &&
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$absdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
--- /dev/null
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
--- /dev/null
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
--- /dev/null
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
--- /dev/null
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
--- /dev/null
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
--- /dev/null
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+fi
+
+case $1 in
+
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
+
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+
+Supported PROGRAM values:
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+/* -*- Mode: C; c-basic-offset:8 ; indent-tabs-mode:t -*- */
+/*
+ * Linux usbfs backend for libusb
+ * Copyright (C) 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright (c) 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ * Copyright (c) 2013 Nathan Hjelm <hjelmn@mac.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+
+#ifdef HAVE_ASM_TYPES_H
+#include <asm/types.h>
+#endif
+
+#ifdef HAVE_SYS_SOCKET_H
+#include <sys/socket.h>
+#endif
+
+#include <arpa/inet.h>
+
+#ifdef HAVE_LINUX_NETLINK_H
+#include <linux/netlink.h>
+#endif
+
+#ifdef HAVE_LINUX_FILTER_H
+#include <linux/filter.h>
+#endif
+
+#include "libusbi.h"
+#include "linux_usbfs.h"
+
+#define KERNEL 1
+
+static int linux_netlink_socket = -1;
+static int netlink_control_pipe[2] = { -1, -1 };
+static pthread_t libusb_linux_event_thread;
+
+static void *linux_netlink_event_thread_main(void *arg);
+
+struct sockaddr_nl snl = { .nl_family=AF_NETLINK, .nl_groups=KERNEL };
+
+static int set_fd_cloexec_nb (int fd)
+{
+ int flags;
+
+#if defined(FD_CLOEXEC)
+ flags = fcntl (linux_netlink_socket, F_GETFD);
+ if (0 > flags) {
+ return -1;
+ }
+
+ if (!(flags & FD_CLOEXEC)) {
+ fcntl (linux_netlink_socket, F_SETFD, flags | FD_CLOEXEC);
+ }
+#endif
+
+ flags = fcntl (linux_netlink_socket, F_GETFL);
+ if (0 > flags) {
+ return -1;
+ }
+
+ if (!(flags & O_NONBLOCK)) {
+ fcntl (linux_netlink_socket, F_SETFL, flags | O_NONBLOCK);
+ }
+
+ return 0;
+}
+
+int linux_netlink_start_event_monitor(void)
+{
+ int socktype = SOCK_RAW;
+ int ret;
+
+ snl.nl_groups = KERNEL;
+
+#if defined(SOCK_CLOEXEC)
+ socktype |= SOCK_CLOEXEC;
+#endif
+#if defined(SOCK_NONBLOCK)
+ socktype |= SOCK_NONBLOCK;
+#endif
+
+ linux_netlink_socket = socket(PF_NETLINK, socktype, NETLINK_KOBJECT_UEVENT);
+ if (-1 == linux_netlink_socket && EINVAL == errno) {
+ linux_netlink_socket = socket(PF_NETLINK, SOCK_RAW, NETLINK_KOBJECT_UEVENT);
+ }
+
+ if (-1 == linux_netlink_socket) {
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ ret = set_fd_cloexec_nb (linux_netlink_socket);
+ if (0 != ret) {
+ close (linux_netlink_socket);
+ linux_netlink_socket = -1;
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ ret = bind(linux_netlink_socket, (struct sockaddr *) &snl, sizeof(snl));
+ if (0 != ret) {
+ close(linux_netlink_socket);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ /* TODO -- add authentication */
+ /* setsockopt(linux_netlink_socket, SOL_SOCKET, SO_PASSCRED, &one, sizeof(one)); */
+
+ ret = usbi_pipe(netlink_control_pipe);
+ if (ret) {
+ usbi_err(NULL, "could not create netlink control pipe");
+ close(linux_netlink_socket);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ ret = pthread_create(&libusb_linux_event_thread, NULL, linux_netlink_event_thread_main, NULL);
+ if (0 != ret) {
+ close(netlink_control_pipe[0]);
+ close(netlink_control_pipe[1]);
+ close(linux_netlink_socket);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+int linux_netlink_stop_event_monitor(void)
+{
+ int r;
+ char dummy = 1;
+
+ if (-1 == linux_netlink_socket) {
+ /* already closed. nothing to do */
+ return LIBUSB_SUCCESS;
+ }
+
+ /* Write some dummy data to the control pipe and
+ * wait for the thread to exit */
+ r = usbi_write(netlink_control_pipe[1], &dummy, sizeof(dummy));
+ if (r <= 0) {
+ usbi_warn(NULL, "netlink control pipe signal failed");
+ }
+ pthread_join(libusb_linux_event_thread, NULL);
+
+ close(linux_netlink_socket);
+ linux_netlink_socket = -1;
+
+ /* close and reset control pipe */
+ close(netlink_control_pipe[0]);
+ close(netlink_control_pipe[1]);
+ netlink_control_pipe[0] = -1;
+ netlink_control_pipe[1] = -1;
+
+ return LIBUSB_SUCCESS;
+}
+
+static const char *netlink_message_parse (const char *buffer, size_t len, const char *key)
+{
+ size_t keylen = strlen(key);
+ size_t offset;
+
+ for (offset = 0 ; offset < len && '\0' != buffer[offset] ; offset += strlen(buffer + offset) + 1) {
+ if (0 == strncmp(buffer + offset, key, keylen) &&
+ '=' == buffer[offset + keylen]) {
+ return buffer + offset + keylen + 1;
+ }
+ }
+
+ return NULL;
+}
+
+/* parse parts of netlink message common to both libudev and the kernel */
+static int linux_netlink_parse(char *buffer, size_t len, int *detached, const char **sys_name,
+ uint8_t *busnum, uint8_t *devaddr) {
+ const char *tmp;
+ int i;
+
+ errno = 0;
+
+ *sys_name = NULL;
+ *detached = 0;
+ *busnum = 0;
+ *devaddr = 0;
+
+ tmp = netlink_message_parse((const char *) buffer, len, "ACTION");
+ if (tmp == NULL)
+ return -1;
+ if (0 == strcmp(tmp, "remove")) {
+ *detached = 1;
+ } else if (0 != strcmp(tmp, "add")) {
+ usbi_dbg("unknown device action %s", tmp);
+ return -1;
+ }
+
+ /* check that this is a usb message */
+ tmp = netlink_message_parse(buffer, len, "SUBSYSTEM");
+ if (NULL == tmp || 0 != strcmp(tmp, "usb")) {
+ /* not usb. ignore */
+ return -1;
+ }
+
+ tmp = netlink_message_parse(buffer, len, "BUSNUM");
+ if (NULL == tmp) {
+ /* no bus number. try "DEVICE" */
+ tmp = netlink_message_parse(buffer, len, "DEVICE");
+ if (NULL == tmp) {
+ /* not usb. ignore */
+ return -1;
+ }
+
+ /* Parse a device path such as /dev/bus/usb/003/004 */
+ char *pLastSlash = (char*)strrchr(tmp,'/');
+ if(NULL == pLastSlash) {
+ return -1;
+ }
+
+ *devaddr = strtoul(pLastSlash + 1, NULL, 10);
+ if (errno) {
+ errno = 0;
+ return -1;
+ }
+
+ *busnum = strtoul(pLastSlash - 3, NULL, 10);
+ if (errno) {
+ errno = 0;
+ return -1;
+ }
+
+ return 0;
+ }
+
+ *busnum = (uint8_t)(strtoul(tmp, NULL, 10) & 0xff);
+ if (errno) {
+ errno = 0;
+ return -1;
+ }
+
+ tmp = netlink_message_parse(buffer, len, "DEVNUM");
+ if (NULL == tmp) {
+ return -1;
+ }
+
+ *devaddr = (uint8_t)(strtoul(tmp, NULL, 10) & 0xff);
+ if (errno) {
+ errno = 0;
+ return -1;
+ }
+
+ tmp = netlink_message_parse(buffer, len, "DEVPATH");
+ if (NULL == tmp) {
+ return -1;
+ }
+
+ for (i = strlen(tmp) - 1 ; i ; --i) {
+ if ('/' ==tmp[i]) {
+ *sys_name = tmp + i + 1;
+ break;
+ }
+ }
+
+ /* found a usb device */
+ return 0;
+}
+
+static int linux_netlink_read_message(void)
+{
+ unsigned char buffer[1024];
+ struct iovec iov = {.iov_base = buffer, .iov_len = sizeof(buffer)};
+ struct msghdr meh = { .msg_iov=&iov, .msg_iovlen=1,
+ .msg_name=&snl, .msg_namelen=sizeof(snl) };
+ const char *sys_name = NULL;
+ uint8_t busnum, devaddr;
+ int detached, r;
+ size_t len;
+
+ /* read netlink message */
+ memset(buffer, 0, sizeof(buffer));
+ len = recvmsg(linux_netlink_socket, &meh, 0);
+ if (len < 32) {
+ if (errno != EAGAIN)
+ usbi_dbg("error recieving message from netlink");
+ return -1;
+ }
+
+ /* TODO -- authenticate this message is from the kernel or udevd */
+
+ r = linux_netlink_parse(buffer, len, &detached, &sys_name,
+ &busnum, &devaddr);
+ if (r)
+ return r;
+
+ usbi_dbg("netlink hotplug found device busnum: %hhu, devaddr: %hhu, sys_name: %s, removed: %s",
+ busnum, devaddr, sys_name, detached ? "yes" : "no");
+
+ /* signal device is available (or not) to all contexts */
+ if (detached)
+ linux_device_disconnected(busnum, devaddr, sys_name);
+ else
+ linux_hotplug_enumerate(busnum, devaddr, sys_name);
+
+ return 0;
+}
+
+static void *linux_netlink_event_thread_main(void *arg)
+{
+ char dummy;
+ int r;
+ struct pollfd fds[] = {
+ { .fd = netlink_control_pipe[0],
+ .events = POLLIN },
+ { .fd = linux_netlink_socket,
+ .events = POLLIN },
+ };
+
+ /* silence compiler warning */
+ (void) arg;
+
+ while (poll(fds, 2, -1) >= 0) {
+ if (fds[0].revents & POLLIN) {
+ /* activity on control pipe, read the byte and exit */
+ r = usbi_read(netlink_control_pipe[0], &dummy, sizeof(dummy));
+ if (r <= 0) {
+ usbi_warn(NULL, "netlink control pipe read failed");
+ }
+ break;
+ }
+ if (fds[1].revents & POLLIN) {
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ linux_netlink_read_message();
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+ }
+ }
+
+ return NULL;
+}
+
+void linux_netlink_hotplug_poll(void)
+{
+ int r;
+
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ do {
+ r = linux_netlink_read_message();
+ } while (r == 0);
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+}
--- /dev/null
+/* -*- Mode: C; c-basic-offset:8 ; indent-tabs-mode:t -*- */
+/*
+ * Linux usbfs backend for libusb
+ * Copyright (C) 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright (c) 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ * Copyright (c) 2012-2013 Nathan Hjelm <hjelmn@mac.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <assert.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/utsname.h>
+#include <sys/socket.h>
+#include <unistd.h>
+#include <libudev.h>
+
+#include "libusbi.h"
+#include "linux_usbfs.h"
+
+/* udev context */
+static struct udev *udev_ctx = NULL;
+static int udev_monitor_fd = -1;
+static int udev_control_pipe[2] = {-1, -1};
+static struct udev_monitor *udev_monitor = NULL;
+static pthread_t linux_event_thread;
+
+static void udev_hotplug_event(struct udev_device* udev_dev);
+static void *linux_udev_event_thread_main(void *arg);
+
+int linux_udev_start_event_monitor(void)
+{
+ int r;
+
+ assert(udev_ctx == NULL);
+ udev_ctx = udev_new();
+ if (!udev_ctx) {
+ usbi_err(NULL, "could not create udev context");
+ goto err;
+ }
+
+ udev_monitor = udev_monitor_new_from_netlink(udev_ctx, "udev");
+ if (!udev_monitor) {
+ usbi_err(NULL, "could not initialize udev monitor");
+ goto err_free_ctx;
+ }
+
+ r = udev_monitor_filter_add_match_subsystem_devtype(udev_monitor, "usb", 0);
+ if (r) {
+ usbi_err(NULL, "could not initialize udev monitor filter for \"usb\" subsystem");
+ goto err_free_monitor;
+ }
+
+ if (udev_monitor_enable_receiving(udev_monitor)) {
+ usbi_err(NULL, "failed to enable the udev monitor");
+ goto err_free_monitor;
+ }
+
+ udev_monitor_fd = udev_monitor_get_fd(udev_monitor);
+
+ /* Some older versions of udev are not non-blocking by default,
+ * so make sure this is set */
+ r = fcntl(udev_monitor_fd, F_GETFL);
+ if (r == -1) {
+ usbi_err(NULL, "getting udev monitor fd flags (%d)", errno);
+ goto err_free_monitor;
+ }
+ r = fcntl(udev_monitor_fd, F_SETFL, r | O_NONBLOCK);
+ if (r) {
+ usbi_err(NULL, "setting udev monitor fd flags (%d)", errno);
+ goto err_free_monitor;
+ }
+
+ r = usbi_pipe(udev_control_pipe);
+ if (r) {
+ usbi_err(NULL, "could not create udev control pipe");
+ goto err_free_monitor;
+ }
+
+ r = pthread_create(&linux_event_thread, NULL, linux_udev_event_thread_main, NULL);
+ if (r) {
+ usbi_err(NULL, "creating hotplug event thread (%d)", r);
+ goto err_close_pipe;
+ }
+
+ return LIBUSB_SUCCESS;
+
+err_close_pipe:
+ close(udev_control_pipe[0]);
+ close(udev_control_pipe[1]);
+err_free_monitor:
+ udev_monitor_unref(udev_monitor);
+ udev_monitor = NULL;
+ udev_monitor_fd = -1;
+err_free_ctx:
+ udev_unref(udev_ctx);
+err:
+ udev_ctx = NULL;
+ return LIBUSB_ERROR_OTHER;
+}
+
+int linux_udev_stop_event_monitor(void)
+{
+ char dummy = 1;
+ int r;
+
+ assert(udev_ctx != NULL);
+ assert(udev_monitor != NULL);
+ assert(udev_monitor_fd != -1);
+
+ /* Write some dummy data to the control pipe and
+ * wait for the thread to exit */
+ r = usbi_write(udev_control_pipe[1], &dummy, sizeof(dummy));
+ if (r <= 0) {
+ usbi_warn(NULL, "udev control pipe signal failed");
+ }
+ pthread_join(linux_event_thread, NULL);
+
+ /* Release the udev monitor */
+ udev_monitor_unref(udev_monitor);
+ udev_monitor = NULL;
+ udev_monitor_fd = -1;
+
+ /* Clean up the udev context */
+ udev_unref(udev_ctx);
+ udev_ctx = NULL;
+
+ /* close and reset control pipe */
+ close(udev_control_pipe[0]);
+ close(udev_control_pipe[1]);
+ udev_control_pipe[0] = -1;
+ udev_control_pipe[1] = -1;
+
+ return LIBUSB_SUCCESS;
+}
+
+static void *linux_udev_event_thread_main(void *arg)
+{
+ char dummy;
+ int r;
+ struct udev_device* udev_dev;
+ struct pollfd fds[] = {
+ {.fd = udev_control_pipe[0],
+ .events = POLLIN},
+ {.fd = udev_monitor_fd,
+ .events = POLLIN},
+ };
+
+ usbi_dbg("udev event thread entering.");
+
+ while (poll(fds, 2, -1) >= 0) {
+ if (fds[0].revents & POLLIN) {
+ /* activity on control pipe, read the byte and exit */
+ r = usbi_read(udev_control_pipe[0], &dummy, sizeof(dummy));
+ if (r <= 0) {
+ usbi_warn(NULL, "udev control pipe read failed");
+ }
+ break;
+ }
+ if (fds[1].revents & POLLIN) {
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ udev_dev = udev_monitor_receive_device(udev_monitor);
+ if (udev_dev)
+ udev_hotplug_event(udev_dev);
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+ }
+ }
+
+ usbi_dbg("udev event thread exiting");
+
+ return NULL;
+}
+
+static int udev_device_info(struct libusb_context *ctx, int detached,
+ struct udev_device *udev_dev, uint8_t *busnum,
+ uint8_t *devaddr, const char **sys_name) {
+ const char *dev_node;
+
+ dev_node = udev_device_get_devnode(udev_dev);
+ if (!dev_node) {
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ *sys_name = udev_device_get_sysname(udev_dev);
+ if (!*sys_name) {
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return linux_get_device_address(ctx, detached, busnum, devaddr,
+ dev_node, *sys_name);
+}
+
+static void udev_hotplug_event(struct udev_device* udev_dev)
+{
+ const char* udev_action;
+ const char* sys_name = NULL;
+ uint8_t busnum = 0, devaddr = 0;
+ int detached;
+ int r;
+
+ do {
+ udev_action = udev_device_get_action(udev_dev);
+ if (!udev_action) {
+ break;
+ }
+
+ detached = !strncmp(udev_action, "remove", 6);
+
+ r = udev_device_info(NULL, detached, udev_dev, &busnum, &devaddr, &sys_name);
+ if (LIBUSB_SUCCESS != r) {
+ break;
+ }
+
+ usbi_dbg("udev hotplug event. action: %s.", udev_action);
+
+ if (strncmp(udev_action, "add", 3) == 0) {
+ linux_hotplug_enumerate(busnum, devaddr, sys_name);
+ } else if (detached) {
+ linux_device_disconnected(busnum, devaddr, sys_name);
+ } else {
+ usbi_err(NULL, "ignoring udev action %s", udev_action);
+ }
+ } while (0);
+
+ udev_device_unref(udev_dev);
+}
+
+int linux_udev_scan_devices(struct libusb_context *ctx)
+{
+ struct udev_enumerate *enumerator;
+ struct udev_list_entry *devices, *entry;
+ struct udev_device *udev_dev;
+ const char *sys_name;
+ int r;
+
+ assert(udev_ctx != NULL);
+
+ enumerator = udev_enumerate_new(udev_ctx);
+ if (NULL == enumerator) {
+ usbi_err(ctx, "error creating udev enumerator");
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ udev_enumerate_add_match_subsystem(enumerator, "usb");
+ udev_enumerate_scan_devices(enumerator);
+ devices = udev_enumerate_get_list_entry(enumerator);
+
+ udev_list_entry_foreach(entry, devices) {
+ const char *path = udev_list_entry_get_name(entry);
+ uint8_t busnum = 0, devaddr = 0;
+
+ udev_dev = udev_device_new_from_syspath(udev_ctx, path);
+
+ r = udev_device_info(ctx, 0, udev_dev, &busnum, &devaddr, &sys_name);
+ if (r) {
+ udev_device_unref(udev_dev);
+ continue;
+ }
+
+ linux_enumerate_device(ctx, busnum, devaddr, sys_name);
+ udev_device_unref(udev_dev);
+ }
+
+ udev_enumerate_unref(enumerator);
+
+ return LIBUSB_SUCCESS;
+}
+
+void linux_udev_hotplug_poll(void)
+{
+ struct udev_device* udev_dev;
+
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ do {
+ udev_dev = udev_monitor_receive_device(udev_monitor);
+ if (udev_dev) {
+ usbi_dbg("Handling hotplug event from hotplug_poll");
+ udev_hotplug_event(udev_dev);
+ }
+ } while (udev_dev);
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+}
--- /dev/null
+/* -*- Mode: C; c-basic-offset:8 ; indent-tabs-mode:t -*- */
+/*
+ * Linux usbfs backend for libusb
+ * Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ * Copyright © 2013 Nathan Hjelm <hjelmn@mac.com>
+ * Copyright © 2012-2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "config.h"
+
+#include <assert.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/utsname.h>
+#include <unistd.h>
+
+#include "libusbi.h"
+#include "linux_usbfs.h"
+
+/* sysfs vs usbfs:
+ * opening a usbfs node causes the device to be resumed, so we attempt to
+ * avoid this during enumeration.
+ *
+ * sysfs allows us to read the kernel's in-memory copies of device descriptors
+ * and so forth, avoiding the need to open the device:
+ * - The binary "descriptors" file contains all config descriptors since
+ * 2.6.26, commit 217a9081d8e69026186067711131b77f0ce219ed
+ * - The binary "descriptors" file was added in 2.6.23, commit
+ * 69d42a78f935d19384d1f6e4f94b65bb162b36df, but it only contains the
+ * active config descriptors
+ * - The "busnum" file was added in 2.6.22, commit
+ * 83f7d958eab2fbc6b159ee92bf1493924e1d0f72
+ * - The "devnum" file has been present since pre-2.6.18
+ * - the "bConfigurationValue" file has been present since pre-2.6.18
+ *
+ * If we have bConfigurationValue, busnum, and devnum, then we can determine
+ * the active configuration without having to open the usbfs node in RDWR mode.
+ * The busnum file is important as that is the only way we can relate sysfs
+ * devices to usbfs nodes.
+ *
+ * If we also have all descriptors, we can obtain the device descriptor and
+ * configuration without touching usbfs at all.
+ */
+
+/* endianness for multi-byte fields:
+ *
+ * Descriptors exposed by usbfs have the multi-byte fields in the device
+ * descriptor as host endian. Multi-byte fields in the other descriptors are
+ * bus-endian. The kernel documentation says otherwise, but it is wrong.
+ *
+ * In sysfs all descriptors are bus-endian.
+ */
+
+static const char *usbfs_path = NULL;
+
+/* use usbdev*.* device names in /dev instead of the usbfs bus directories */
+static int usbdev_names = 0;
+
+/* Linux 2.6.32 adds support for a bulk continuation URB flag. this basically
+ * allows us to mark URBs as being part of a specific logical transfer when
+ * we submit them to the kernel. then, on any error except a cancellation, all
+ * URBs within that transfer will be cancelled and no more URBs will be
+ * accepted for the transfer, meaning that no more data can creep in.
+ *
+ * The BULK_CONTINUATION flag must be set on all URBs within a bulk transfer
+ * (in either direction) except the first.
+ * For IN transfers, we must also set SHORT_NOT_OK on all URBs except the
+ * last; it means that the kernel should treat a short reply as an error.
+ * For OUT transfers, SHORT_NOT_OK must not be set. it isn't needed (OUT
+ * transfers can't be short unless there's already some sort of error), and
+ * setting this flag is disallowed (a kernel with USB debugging enabled will
+ * reject such URBs).
+ */
+static int supports_flag_bulk_continuation = -1;
+
+/* Linux 2.6.31 fixes support for the zero length packet URB flag. This
+ * allows us to mark URBs that should be followed by a zero length data
+ * packet, which can be required by device- or class-specific protocols.
+ */
+static int supports_flag_zero_packet = -1;
+
+/* clock ID for monotonic clock, as not all clock sources are available on all
+ * systems. appropriate choice made at initialization time. */
+static clockid_t monotonic_clkid = -1;
+
+/* Linux 2.6.22 (commit 83f7d958eab2fbc6b159ee92bf1493924e1d0f72) adds a busnum
+ * to sysfs, so we can relate devices. This also implies that we can read
+ * the active configuration through bConfigurationValue */
+static int sysfs_can_relate_devices = -1;
+
+/* Linux 2.6.26 (commit 217a9081d8e69026186067711131b77f0ce219ed) adds all
+ * config descriptors (rather then just the active config) to the sysfs
+ * descriptors file, so from then on we can use them. */
+static int sysfs_has_descriptors = -1;
+
+/* how many times have we initted (and not exited) ? */
+static int init_count = 0;
+
+/* Serialize hotplug start/stop */
+usbi_mutex_static_t linux_hotplug_startstop_lock = USBI_MUTEX_INITIALIZER;
+/* Serialize scan-devices, event-thread, and poll */
+usbi_mutex_static_t linux_hotplug_lock = USBI_MUTEX_INITIALIZER;
+
+static int linux_start_event_monitor(void);
+static int linux_stop_event_monitor(void);
+static int linux_scan_devices(struct libusb_context *ctx);
+static int sysfs_scan_device(struct libusb_context *ctx, const char *devname);
+static int detach_kernel_driver_and_claim(struct libusb_device_handle *, int);
+
+#if !defined(USE_UDEV)
+static int linux_default_scan_devices (struct libusb_context *ctx);
+#endif
+
+struct linux_device_priv {
+ char *sysfs_dir;
+ unsigned char *descriptors;
+ int descriptors_len;
+ int active_config; /* cache val for !sysfs_can_relate_devices */
+};
+
+struct linux_device_handle_priv {
+ int fd;
+ uint32_t caps;
+};
+
+enum reap_action {
+ NORMAL = 0,
+ /* submission failed after the first URB, so await cancellation/completion
+ * of all the others */
+ SUBMIT_FAILED,
+
+ /* cancelled by user or timeout */
+ CANCELLED,
+
+ /* completed multi-URB transfer in non-final URB */
+ COMPLETED_EARLY,
+
+ /* one or more urbs encountered a low-level error */
+ ERROR,
+};
+
+struct linux_transfer_priv {
+ union {
+ struct usbfs_urb *urbs;
+ struct usbfs_urb **iso_urbs;
+ };
+
+ enum reap_action reap_action;
+ int num_urbs;
+ int num_retired;
+ enum libusb_transfer_status reap_status;
+
+ /* next iso packet in user-supplied transfer to be populated */
+ int iso_packet_offset;
+};
+
+static int _get_usbfs_fd(struct libusb_device *dev, mode_t mode, int silent)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ char path[PATH_MAX];
+ int fd;
+ int delay = 10000;
+
+ if (usbdev_names)
+ snprintf(path, PATH_MAX, "%s/usbdev%d.%d",
+ usbfs_path, dev->bus_number, dev->device_address);
+ else
+ snprintf(path, PATH_MAX, "%s/%03d/%03d",
+ usbfs_path, dev->bus_number, dev->device_address);
+
+ fd = open(path, mode);
+ if (fd != -1)
+ return fd; /* Success */
+
+ if (errno == ENOENT) {
+ if (!silent)
+ usbi_err(ctx, "File doesn't exist, wait %d ms and try again", delay/1000);
+
+ /* Wait 10ms for USB device path creation.*/
+ usleep(delay);
+
+ fd = open(path, mode);
+ if (fd != -1)
+ return fd; /* Success */
+ }
+
+ if (!silent) {
+ usbi_err(ctx, "libusb couldn't open USB device %s: %s",
+ path, strerror(errno));
+ if (errno == EACCES && mode == O_RDWR)
+ usbi_err(ctx, "libusb requires write access to USB "
+ "device nodes.");
+ }
+
+ if (errno == EACCES)
+ return LIBUSB_ERROR_ACCESS;
+ if (errno == ENOENT)
+ return LIBUSB_ERROR_NO_DEVICE;
+ return LIBUSB_ERROR_IO;
+}
+
+static struct linux_device_priv *_device_priv(struct libusb_device *dev)
+{
+ return (struct linux_device_priv *) dev->os_priv;
+}
+
+static struct linux_device_handle_priv *_device_handle_priv(
+ struct libusb_device_handle *handle)
+{
+ return (struct linux_device_handle_priv *) handle->os_priv;
+}
+
+/* check dirent for a /dev/usbdev%d.%d name
+ * optionally return bus/device on success */
+static int _is_usbdev_entry(struct dirent *entry, int *bus_p, int *dev_p)
+{
+ int busnum, devnum;
+
+ if (sscanf(entry->d_name, "usbdev%d.%d", &busnum, &devnum) != 2)
+ return 0;
+
+ usbi_dbg("found: %s", entry->d_name);
+ if (bus_p != NULL)
+ *bus_p = busnum;
+ if (dev_p != NULL)
+ *dev_p = devnum;
+ return 1;
+}
+
+static int check_usb_vfs(const char *dirname)
+{
+ DIR *dir;
+ struct dirent *entry;
+ int found = 0;
+
+ dir = opendir(dirname);
+ if (!dir)
+ return 0;
+
+ while ((entry = readdir(dir)) != NULL) {
+ if (entry->d_name[0] == '.')
+ continue;
+
+ /* We assume if we find any files that it must be the right place */
+ found = 1;
+ break;
+ }
+
+ closedir(dir);
+ return found;
+}
+
+static const char *find_usbfs_path(void)
+{
+ const char *path = "/dev/bus/usb";
+ const char *ret = NULL;
+
+ if (check_usb_vfs(path)) {
+ ret = path;
+ } else {
+ path = "/proc/bus/usb";
+ if (check_usb_vfs(path))
+ ret = path;
+ }
+
+ /* look for /dev/usbdev*.* if the normal places fail */
+ if (ret == NULL) {
+ struct dirent *entry;
+ DIR *dir;
+
+ path = "/dev";
+ dir = opendir(path);
+ if (dir != NULL) {
+ while ((entry = readdir(dir)) != NULL) {
+ if (_is_usbdev_entry(entry, NULL, NULL)) {
+ /* found one; that's enough */
+ ret = path;
+ usbdev_names = 1;
+ break;
+ }
+ }
+ closedir(dir);
+ }
+ }
+
+/* On udev based systems without any usb-devices /dev/bus/usb will not
+ * exist. So if we've not found anything and we're using udev for hotplug
+ * simply assume /dev/bus/usb rather then making libusb_init fail. */
+#if defined(USE_UDEV)
+ if (ret == NULL)
+ ret = "/dev/bus/usb";
+#endif
+
+ if (ret != NULL)
+ usbi_dbg("found usbfs at %s", ret);
+
+ return ret;
+}
+
+/* the monotonic clock is not usable on all systems (e.g. embedded ones often
+ * seem to lack it). fall back to REALTIME if we have to. */
+static clockid_t find_monotonic_clock(void)
+{
+#ifdef CLOCK_MONOTONIC
+ struct timespec ts;
+ int r;
+
+ /* Linux 2.6.28 adds CLOCK_MONOTONIC_RAW but we don't use it
+ * because it's not available through timerfd */
+ r = clock_gettime(CLOCK_MONOTONIC, &ts);
+ if (r == 0)
+ return CLOCK_MONOTONIC;
+ usbi_dbg("monotonic clock doesn't work, errno %d", errno);
+#endif
+
+ return CLOCK_REALTIME;
+}
+
+static int kernel_version_ge(int major, int minor, int sublevel)
+{
+ struct utsname uts;
+ int atoms, kmajor, kminor, ksublevel;
+
+ if (uname(&uts) < 0)
+ return -1;
+ atoms = sscanf(uts.release, "%d.%d.%d", &kmajor, &kminor, &ksublevel);
+ if (atoms < 1)
+ return -1;
+
+ if (kmajor > major)
+ return 1;
+ if (kmajor < major)
+ return 0;
+
+ /* kmajor == major */
+ if (atoms < 2)
+ return 0 == minor && 0 == sublevel;
+ if (kminor > minor)
+ return 1;
+ if (kminor < minor)
+ return 0;
+
+ /* kminor == minor */
+ if (atoms < 3)
+ return 0 == sublevel;
+
+ return ksublevel >= sublevel;
+}
+
+static int op_init(struct libusb_context *ctx)
+{
+ struct stat statbuf;
+ int r;
+
+ usbfs_path = find_usbfs_path();
+ if (!usbfs_path) {
+ usbi_err(ctx, "could not find usbfs");
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ if (monotonic_clkid == -1)
+ monotonic_clkid = find_monotonic_clock();
+
+ if (supports_flag_bulk_continuation == -1) {
+ /* bulk continuation URB flag available from Linux 2.6.32 */
+ supports_flag_bulk_continuation = kernel_version_ge(2,6,32);
+ if (supports_flag_bulk_continuation == -1) {
+ usbi_err(ctx, "error checking for bulk continuation support");
+ return LIBUSB_ERROR_OTHER;
+ }
+ }
+
+ if (supports_flag_bulk_continuation)
+ usbi_dbg("bulk continuation flag supported");
+
+ if (-1 == supports_flag_zero_packet) {
+ /* zero length packet URB flag fixed since Linux 2.6.31 */
+ supports_flag_zero_packet = kernel_version_ge(2,6,31);
+ if (-1 == supports_flag_zero_packet) {
+ usbi_err(ctx, "error checking for zero length packet support");
+ return LIBUSB_ERROR_OTHER;
+ }
+ }
+
+ if (supports_flag_zero_packet)
+ usbi_dbg("zero length packet flag supported");
+
+ if (-1 == sysfs_has_descriptors) {
+ /* sysfs descriptors has all descriptors since Linux 2.6.26 */
+ sysfs_has_descriptors = kernel_version_ge(2,6,26);
+ if (-1 == sysfs_has_descriptors) {
+ usbi_err(ctx, "error checking for sysfs descriptors");
+ return LIBUSB_ERROR_OTHER;
+ }
+ }
+
+ if (-1 == sysfs_can_relate_devices) {
+ /* sysfs has busnum since Linux 2.6.22 */
+ sysfs_can_relate_devices = kernel_version_ge(2,6,22);
+ if (-1 == sysfs_can_relate_devices) {
+ usbi_err(ctx, "error checking for sysfs busnum");
+ return LIBUSB_ERROR_OTHER;
+ }
+ }
+
+ if (sysfs_can_relate_devices || sysfs_has_descriptors) {
+ r = stat(SYSFS_DEVICE_PATH, &statbuf);
+ if (r != 0 || !S_ISDIR(statbuf.st_mode)) {
+ usbi_warn(ctx, "sysfs not mounted");
+ sysfs_can_relate_devices = 0;
+ sysfs_has_descriptors = 0;
+ }
+ }
+
+ if (sysfs_can_relate_devices)
+ usbi_dbg("sysfs can relate devices");
+
+ if (sysfs_has_descriptors)
+ usbi_dbg("sysfs has complete descriptors");
+
+ usbi_mutex_static_lock(&linux_hotplug_startstop_lock);
+ r = LIBUSB_SUCCESS;
+ if (init_count == 0) {
+ /* start up hotplug event handler */
+ r = linux_start_event_monitor();
+ }
+ if (r == LIBUSB_SUCCESS) {
+ r = linux_scan_devices(ctx);
+ if (r == LIBUSB_SUCCESS)
+ init_count++;
+ else if (init_count == 0)
+ linux_stop_event_monitor();
+ } else
+ usbi_err(ctx, "error starting hotplug event monitor");
+ usbi_mutex_static_unlock(&linux_hotplug_startstop_lock);
+
+ return r;
+}
+
+static void op_exit(void)
+{
+ usbi_mutex_static_lock(&linux_hotplug_startstop_lock);
+ assert(init_count != 0);
+ if (!--init_count) {
+ /* tear down event handler */
+ (void)linux_stop_event_monitor();
+ }
+ usbi_mutex_static_unlock(&linux_hotplug_startstop_lock);
+}
+
+static int linux_start_event_monitor(void)
+{
+#if defined(USE_UDEV)
+ return linux_udev_start_event_monitor();
+#else
+ return linux_netlink_start_event_monitor();
+#endif
+}
+
+static int linux_stop_event_monitor(void)
+{
+#if defined(USE_UDEV)
+ return linux_udev_stop_event_monitor();
+#else
+ return linux_netlink_stop_event_monitor();
+#endif
+}
+
+static int linux_scan_devices(struct libusb_context *ctx)
+{
+ int ret;
+
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+
+#if defined(USE_UDEV)
+ ret = linux_udev_scan_devices(ctx);
+#else
+ ret = linux_default_scan_devices(ctx);
+#endif
+
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+
+ return ret;
+}
+
+static void op_hotplug_poll(void)
+{
+#if defined(USE_UDEV)
+ linux_udev_hotplug_poll();
+#else
+ linux_netlink_hotplug_poll();
+#endif
+}
+
+static int _open_sysfs_attr(struct libusb_device *dev, const char *attr)
+{
+ struct linux_device_priv *priv = _device_priv(dev);
+ char filename[PATH_MAX];
+ int fd;
+
+ snprintf(filename, PATH_MAX, "%s/%s/%s",
+ SYSFS_DEVICE_PATH, priv->sysfs_dir, attr);
+ fd = open(filename, O_RDONLY);
+ if (fd < 0) {
+ usbi_err(DEVICE_CTX(dev),
+ "open %s failed ret=%d errno=%d", filename, fd, errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ return fd;
+}
+
+/* Note only suitable for attributes which always read >= 0, < 0 is error */
+static int __read_sysfs_attr(struct libusb_context *ctx,
+ const char *devname, const char *attr)
+{
+ char filename[PATH_MAX];
+ FILE *f;
+ int r, value;
+
+ snprintf(filename, PATH_MAX, "%s/%s/%s", SYSFS_DEVICE_PATH,
+ devname, attr);
+ f = fopen(filename, "r");
+ if (f == NULL) {
+ if (errno == ENOENT) {
+ /* File doesn't exist. Assume the device has been
+ disconnected (see trac ticket #70). */
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ usbi_err(ctx, "open %s failed errno=%d", filename, errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ r = fscanf(f, "%d", &value);
+ fclose(f);
+ if (r != 1) {
+ usbi_err(ctx, "fscanf %s returned %d, errno=%d", attr, r, errno);
+ return LIBUSB_ERROR_NO_DEVICE; /* For unplug race (trac #70) */
+ }
+ if (value < 0) {
+ usbi_err(ctx, "%s contains a negative value", filename);
+ return LIBUSB_ERROR_IO;
+ }
+
+ return value;
+}
+
+static int op_get_device_descriptor(struct libusb_device *dev,
+ unsigned char *buffer, int *host_endian)
+{
+ struct linux_device_priv *priv = _device_priv(dev);
+
+ *host_endian = sysfs_has_descriptors ? 0 : 1;
+ memcpy(buffer, priv->descriptors, DEVICE_DESC_LENGTH);
+
+ return 0;
+}
+
+/* read the bConfigurationValue for a device */
+static int sysfs_get_active_config(struct libusb_device *dev, int *config)
+{
+ char *endptr;
+ char tmp[5] = {0, 0, 0, 0, 0};
+ long num;
+ int fd;
+ ssize_t r;
+
+ fd = _open_sysfs_attr(dev, "bConfigurationValue");
+ if (fd < 0)
+ return fd;
+
+ r = read(fd, tmp, sizeof(tmp));
+ close(fd);
+ if (r < 0) {
+ usbi_err(DEVICE_CTX(dev),
+ "read bConfigurationValue failed ret=%d errno=%d", r, errno);
+ return LIBUSB_ERROR_IO;
+ } else if (r == 0) {
+ usbi_dbg("device unconfigured");
+ *config = -1;
+ return 0;
+ }
+
+ if (tmp[sizeof(tmp) - 1] != 0) {
+ usbi_err(DEVICE_CTX(dev), "not null-terminated?");
+ return LIBUSB_ERROR_IO;
+ } else if (tmp[0] == 0) {
+ usbi_err(DEVICE_CTX(dev), "no configuration value?");
+ return LIBUSB_ERROR_IO;
+ }
+
+ num = strtol(tmp, &endptr, 10);
+ if (endptr == tmp) {
+ usbi_err(DEVICE_CTX(dev), "error converting '%s' to integer", tmp);
+ return LIBUSB_ERROR_IO;
+ }
+
+ *config = (int) num;
+ return 0;
+}
+
+int linux_get_device_address (struct libusb_context *ctx, int detached,
+ uint8_t *busnum, uint8_t *devaddr,const char *dev_node,
+ const char *sys_name)
+{
+ int sysfs_attr;
+
+ usbi_dbg("getting address for device: %s detached: %d", sys_name, detached);
+ /* can't use sysfs to read the bus and device number if the
+ * device has been detached */
+ if (!sysfs_can_relate_devices || detached || NULL == sys_name) {
+ if (NULL == dev_node) {
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ /* will this work with all supported kernel versions? */
+ if (!strncmp(dev_node, "/dev/bus/usb", 12)) {
+ sscanf (dev_node, "/dev/bus/usb/%hhu/%hhu", busnum, devaddr);
+ } else if (!strncmp(dev_node, "/proc/bus/usb", 13)) {
+ sscanf (dev_node, "/proc/bus/usb/%hhu/%hhu", busnum, devaddr);
+ }
+
+ return LIBUSB_SUCCESS;
+ }
+
+ usbi_dbg("scan %s", sys_name);
+
+ sysfs_attr = __read_sysfs_attr(ctx, sys_name, "busnum");
+ if (0 > sysfs_attr)
+ return sysfs_attr;
+ if (sysfs_attr > 255)
+ return LIBUSB_ERROR_INVALID_PARAM;
+ *busnum = (uint8_t) sysfs_attr;
+
+ sysfs_attr = __read_sysfs_attr(ctx, sys_name, "devnum");
+ if (0 > sysfs_attr)
+ return sysfs_attr;
+ if (sysfs_attr > 255)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ *devaddr = (uint8_t) sysfs_attr;
+
+ usbi_dbg("bus=%d dev=%d", *busnum, *devaddr);
+
+ return LIBUSB_SUCCESS;
+}
+
+/* Return offset of the next descriptor with the given type */
+static int seek_to_next_descriptor(struct libusb_context *ctx,
+ uint8_t descriptor_type, unsigned char *buffer, int size)
+{
+ struct usb_descriptor_header header;
+ int i;
+
+ for (i = 0; size >= 0; i += header.bLength, size -= header.bLength) {
+ if (size == 0)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ if (size < 2) {
+ usbi_err(ctx, "short descriptor read %d/2", size);
+ return LIBUSB_ERROR_IO;
+ }
+ usbi_parse_descriptor(buffer + i, "bb", &header, 0);
+
+ if (i && header.bDescriptorType == descriptor_type)
+ return i;
+ }
+ usbi_err(ctx, "bLength overflow by %d bytes", -size);
+ return LIBUSB_ERROR_IO;
+}
+
+/* Return offset to next config */
+static int seek_to_next_config(struct libusb_context *ctx,
+ unsigned char *buffer, int size)
+{
+ struct libusb_config_descriptor config;
+
+ if (size == 0)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ if (size < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(ctx, "short descriptor read %d/%d",
+ size, LIBUSB_DT_CONFIG_SIZE);
+ return LIBUSB_ERROR_IO;
+ }
+
+ usbi_parse_descriptor(buffer, "bbwbbbbb", &config, 0);
+ if (config.bDescriptorType != LIBUSB_DT_CONFIG) {
+ usbi_err(ctx, "descriptor is not a config desc (type 0x%02x)",
+ config.bDescriptorType);
+ return LIBUSB_ERROR_IO;
+ }
+
+ /*
+ * In usbfs the config descriptors are config.wTotalLength bytes apart,
+ * with any short reads from the device appearing as holes in the file.
+ *
+ * In sysfs wTotalLength is ignored, instead the kernel returns a
+ * config descriptor with verified bLength fields, with descriptors
+ * with an invalid bLength removed.
+ */
+ if (sysfs_has_descriptors) {
+ int next = seek_to_next_descriptor(ctx, LIBUSB_DT_CONFIG,
+ buffer, size);
+ if (next == LIBUSB_ERROR_NOT_FOUND)
+ next = size;
+ if (next < 0)
+ return next;
+
+ if (next != config.wTotalLength)
+ usbi_warn(ctx, "config length mismatch wTotalLength "
+ "%d real %d", config.wTotalLength, next);
+ return next;
+ } else {
+ if (config.wTotalLength < LIBUSB_DT_CONFIG_SIZE) {
+ usbi_err(ctx, "invalid wTotalLength %d",
+ config.wTotalLength);
+ return LIBUSB_ERROR_IO;
+ } else if (config.wTotalLength > size) {
+ usbi_warn(ctx, "short descriptor read %d/%d",
+ size, config.wTotalLength);
+ return size;
+ } else
+ return config.wTotalLength;
+ }
+}
+
+static int op_get_config_descriptor_by_value(struct libusb_device *dev,
+ uint8_t value, unsigned char **buffer, int *host_endian)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ struct linux_device_priv *priv = _device_priv(dev);
+ unsigned char *descriptors = priv->descriptors;
+ int size = priv->descriptors_len;
+ struct libusb_config_descriptor *config;
+
+ *buffer = NULL;
+ /* Unlike the device desc. config descs. are always in raw format */
+ *host_endian = 0;
+
+ /* Skip device header */
+ descriptors += DEVICE_DESC_LENGTH;
+ size -= DEVICE_DESC_LENGTH;
+
+ /* Seek till the config is found, or till "EOF" */
+ while (1) {
+ int next = seek_to_next_config(ctx, descriptors, size);
+ if (next < 0)
+ return next;
+ config = (struct libusb_config_descriptor *)descriptors;
+ if (config->bConfigurationValue == value) {
+ *buffer = descriptors;
+ return next;
+ }
+ size -= next;
+ descriptors += next;
+ }
+}
+
+static int op_get_active_config_descriptor(struct libusb_device *dev,
+ unsigned char *buffer, size_t len, int *host_endian)
+{
+ int r, config;
+ unsigned char *config_desc;
+
+ if (sysfs_can_relate_devices) {
+ r = sysfs_get_active_config(dev, &config);
+ if (r < 0)
+ return r;
+ } else {
+ /* Use cached bConfigurationValue */
+ struct linux_device_priv *priv = _device_priv(dev);
+ config = priv->active_config;
+ }
+ if (config == -1)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ r = op_get_config_descriptor_by_value(dev, config, &config_desc,
+ host_endian);
+ if (r < 0)
+ return r;
+
+ len = MIN(len, r);
+ memcpy(buffer, config_desc, len);
+ return len;
+}
+
+static int op_get_config_descriptor(struct libusb_device *dev,
+ uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian)
+{
+ struct linux_device_priv *priv = _device_priv(dev);
+ unsigned char *descriptors = priv->descriptors;
+ int i, r, size = priv->descriptors_len;
+
+ /* Unlike the device desc. config descs. are always in raw format */
+ *host_endian = 0;
+
+ /* Skip device header */
+ descriptors += DEVICE_DESC_LENGTH;
+ size -= DEVICE_DESC_LENGTH;
+
+ /* Seek till the config is found, or till "EOF" */
+ for (i = 0; ; i++) {
+ r = seek_to_next_config(DEVICE_CTX(dev), descriptors, size);
+ if (r < 0)
+ return r;
+ if (i == config_index)
+ break;
+ size -= r;
+ descriptors += r;
+ }
+
+ len = MIN(len, r);
+ memcpy(buffer, descriptors, len);
+ return len;
+}
+
+/* send a control message to retrieve active configuration */
+static int usbfs_get_active_config(struct libusb_device *dev, int fd)
+{
+ unsigned char active_config = 0;
+ int r;
+
+ struct usbfs_ctrltransfer ctrl = {
+ .bmRequestType = LIBUSB_ENDPOINT_IN,
+ .bRequest = LIBUSB_REQUEST_GET_CONFIGURATION,
+ .wValue = 0,
+ .wIndex = 0,
+ .wLength = 1,
+ .timeout = 1000,
+ .data = &active_config
+ };
+
+ r = ioctl(fd, IOCTL_USBFS_CONTROL, &ctrl);
+ if (r < 0) {
+ if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ /* we hit this error path frequently with buggy devices :( */
+ usbi_warn(DEVICE_CTX(dev),
+ "get_configuration failed ret=%d errno=%d", r, errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ return active_config;
+}
+
+static int initialize_device(struct libusb_device *dev, uint8_t busnum,
+ uint8_t devaddr, const char *sysfs_dir)
+{
+ struct linux_device_priv *priv = _device_priv(dev);
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ int descriptors_size = 512; /* Begin with a 1024 byte alloc */
+ int fd, speed;
+ ssize_t r;
+
+ dev->bus_number = busnum;
+ dev->device_address = devaddr;
+
+ if (sysfs_dir) {
+ priv->sysfs_dir = malloc(strlen(sysfs_dir) + 1);
+ if (!priv->sysfs_dir)
+ return LIBUSB_ERROR_NO_MEM;
+ strcpy(priv->sysfs_dir, sysfs_dir);
+
+ /* Note speed can contain 1.5, in this case __read_sysfs_attr
+ will stop parsing at the '.' and return 1 */
+ speed = __read_sysfs_attr(DEVICE_CTX(dev), sysfs_dir, "speed");
+ if (speed >= 0) {
+ switch (speed) {
+ case 1: dev->speed = LIBUSB_SPEED_LOW; break;
+ case 12: dev->speed = LIBUSB_SPEED_FULL; break;
+ case 480: dev->speed = LIBUSB_SPEED_HIGH; break;
+ case 5000: dev->speed = LIBUSB_SPEED_SUPER; break;
+ default:
+ usbi_warn(DEVICE_CTX(dev), "Unknown device speed: %d Mbps", speed);
+ }
+ }
+ }
+
+ /* cache descriptors in memory */
+ if (sysfs_has_descriptors)
+ fd = _open_sysfs_attr(dev, "descriptors");
+ else
+ fd = _get_usbfs_fd(dev, O_RDONLY, 0);
+ if (fd < 0)
+ return fd;
+
+ do {
+ descriptors_size *= 2;
+ priv->descriptors = usbi_reallocf(priv->descriptors,
+ descriptors_size);
+ if (!priv->descriptors) {
+ close(fd);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ /* usbfs has holes in the file */
+ if (!sysfs_has_descriptors) {
+ memset(priv->descriptors + priv->descriptors_len,
+ 0, descriptors_size - priv->descriptors_len);
+ }
+ r = read(fd, priv->descriptors + priv->descriptors_len,
+ descriptors_size - priv->descriptors_len);
+ if (r < 0) {
+ usbi_err(ctx, "read descriptor failed ret=%d errno=%d",
+ fd, errno);
+ close(fd);
+ return LIBUSB_ERROR_IO;
+ }
+ priv->descriptors_len += r;
+ } while (priv->descriptors_len == descriptors_size);
+
+ close(fd);
+
+ if (priv->descriptors_len < DEVICE_DESC_LENGTH) {
+ usbi_err(ctx, "short descriptor read (%d)",
+ priv->descriptors_len);
+ return LIBUSB_ERROR_IO;
+ }
+
+ if (sysfs_can_relate_devices)
+ return LIBUSB_SUCCESS;
+
+ /* cache active config */
+ fd = _get_usbfs_fd(dev, O_RDWR, 1);
+ if (fd < 0) {
+ /* cannot send a control message to determine the active
+ * config. just assume the first one is active. */
+ usbi_warn(ctx, "Missing rw usbfs access; cannot determine "
+ "active configuration descriptor");
+ if (priv->descriptors_len >=
+ (DEVICE_DESC_LENGTH + LIBUSB_DT_CONFIG_SIZE)) {
+ struct libusb_config_descriptor config;
+ usbi_parse_descriptor(
+ priv->descriptors + DEVICE_DESC_LENGTH,
+ "bbwbbbbb", &config, 0);
+ priv->active_config = config.bConfigurationValue;
+ } else
+ priv->active_config = -1; /* No config dt */
+
+ return LIBUSB_SUCCESS;
+ }
+
+ r = usbfs_get_active_config(dev, fd);
+ if (r > 0) {
+ priv->active_config = r;
+ r = LIBUSB_SUCCESS;
+ } else if (r == 0) {
+ /* some buggy devices have a configuration 0, but we're
+ * reaching into the corner of a corner case here, so let's
+ * not support buggy devices in these circumstances.
+ * stick to the specs: a configuration value of 0 means
+ * unconfigured. */
+ usbi_dbg("active cfg 0? assuming unconfigured device");
+ priv->active_config = -1;
+ r = LIBUSB_SUCCESS;
+ } else if (r == LIBUSB_ERROR_IO) {
+ /* buggy devices sometimes fail to report their active config.
+ * assume unconfigured and continue the probing */
+ usbi_warn(ctx, "couldn't query active configuration, assuming"
+ " unconfigured");
+ priv->active_config = -1;
+ r = LIBUSB_SUCCESS;
+ } /* else r < 0, just return the error code */
+
+ close(fd);
+ return r;
+}
+
+static int linux_get_parent_info(struct libusb_device *dev, const char *sysfs_dir)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ struct libusb_device *it;
+ char *parent_sysfs_dir, *tmp;
+ int ret, add_parent = 1;
+
+ /* XXX -- can we figure out the topology when using usbfs? */
+ if (NULL == sysfs_dir || 0 == strncmp(sysfs_dir, "usb", 3)) {
+ /* either using usbfs or finding the parent of a root hub */
+ return LIBUSB_SUCCESS;
+ }
+
+ parent_sysfs_dir = strdup(sysfs_dir);
+ if (NULL == parent_sysfs_dir) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ if (NULL != (tmp = strrchr(parent_sysfs_dir, '.')) ||
+ NULL != (tmp = strrchr(parent_sysfs_dir, '-'))) {
+ dev->port_number = atoi(tmp + 1);
+ *tmp = '\0';
+ } else {
+ usbi_warn(ctx, "Can not parse sysfs_dir: %s, no parent info",
+ parent_sysfs_dir);
+ free (parent_sysfs_dir);
+ return LIBUSB_SUCCESS;
+ }
+
+ /* is the parent a root hub? */
+ if (NULL == strchr(parent_sysfs_dir, '-')) {
+ tmp = parent_sysfs_dir;
+ ret = asprintf (&parent_sysfs_dir, "usb%s", tmp);
+ free (tmp);
+ if (0 > ret) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ }
+
+retry:
+ /* find the parent in the context */
+ usbi_mutex_lock(&ctx->usb_devs_lock);
+ list_for_each_entry(it, &ctx->usb_devs, list, struct libusb_device) {
+ struct linux_device_priv *priv = _device_priv(it);
+ if (0 == strcmp (priv->sysfs_dir, parent_sysfs_dir)) {
+ dev->parent_dev = libusb_ref_device(it);
+ break;
+ }
+ }
+ usbi_mutex_unlock(&ctx->usb_devs_lock);
+
+ if (!dev->parent_dev && add_parent) {
+ usbi_dbg("parent_dev %s not enumerated yet, enumerating now",
+ parent_sysfs_dir);
+ sysfs_scan_device(ctx, parent_sysfs_dir);
+ add_parent = 0;
+ goto retry;
+ }
+
+ usbi_dbg("Dev %p (%s) has parent %p (%s) port %d", dev, sysfs_dir,
+ dev->parent_dev, parent_sysfs_dir, dev->port_number);
+
+ free (parent_sysfs_dir);
+
+ return LIBUSB_SUCCESS;
+}
+
+int linux_enumerate_device(struct libusb_context *ctx,
+ uint8_t busnum, uint8_t devaddr, const char *sysfs_dir)
+{
+ unsigned long session_id;
+ struct libusb_device *dev;
+ int r = 0;
+
+ /* FIXME: session ID is not guaranteed unique as addresses can wrap and
+ * will be reused. instead we should add a simple sysfs attribute with
+ * a session ID. */
+ session_id = busnum << 8 | devaddr;
+ usbi_dbg("busnum %d devaddr %d session_id %ld", busnum, devaddr,
+ session_id);
+
+ dev = usbi_get_device_by_session_id(ctx, session_id);
+ if (dev) {
+ /* device already exists in the context */
+ usbi_dbg("session_id %ld already exists", session_id);
+ libusb_unref_device(dev);
+ return LIBUSB_SUCCESS;
+ }
+
+ usbi_dbg("allocating new device for %d/%d (session %ld)",
+ busnum, devaddr, session_id);
+ dev = usbi_alloc_device(ctx, session_id);
+ if (!dev)
+ return LIBUSB_ERROR_NO_MEM;
+
+ r = initialize_device(dev, busnum, devaddr, sysfs_dir);
+ if (r < 0)
+ goto out;
+ r = usbi_sanitize_device(dev);
+ if (r < 0)
+ goto out;
+
+ r = linux_get_parent_info(dev, sysfs_dir);
+ if (r < 0)
+ goto out;
+out:
+ if (r < 0)
+ libusb_unref_device(dev);
+ else
+ usbi_connect_device(dev);
+
+ return r;
+}
+
+void linux_hotplug_enumerate(uint8_t busnum, uint8_t devaddr, const char *sys_name)
+{
+ struct libusb_context *ctx;
+
+ usbi_mutex_static_lock(&active_contexts_lock);
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+ linux_enumerate_device(ctx, busnum, devaddr, sys_name);
+ }
+ usbi_mutex_static_unlock(&active_contexts_lock);
+}
+
+void linux_device_disconnected(uint8_t busnum, uint8_t devaddr, const char *sys_name)
+{
+ struct libusb_context *ctx;
+ struct libusb_device *dev;
+ unsigned long session_id = busnum << 8 | devaddr;
+
+ usbi_mutex_static_lock(&active_contexts_lock);
+ list_for_each_entry(ctx, &active_contexts_list, list, struct libusb_context) {
+ dev = usbi_get_device_by_session_id (ctx, session_id);
+ if (NULL != dev) {
+ usbi_disconnect_device (dev);
+ libusb_unref_device(dev);
+ } else {
+ usbi_dbg("device not found for session %x", session_id);
+ }
+ }
+ usbi_mutex_static_unlock(&active_contexts_lock);
+}
+
+#if !defined(USE_UDEV)
+/* open a bus directory and adds all discovered devices to the context */
+static int usbfs_scan_busdir(struct libusb_context *ctx, uint8_t busnum)
+{
+ DIR *dir;
+ char dirpath[PATH_MAX];
+ struct dirent *entry;
+ int r = LIBUSB_ERROR_IO;
+
+ snprintf(dirpath, PATH_MAX, "%s/%03d", usbfs_path, busnum);
+ usbi_dbg("%s", dirpath);
+ dir = opendir(dirpath);
+ if (!dir) {
+ usbi_err(ctx, "opendir '%s' failed, errno=%d", dirpath, errno);
+ /* FIXME: should handle valid race conditions like hub unplugged
+ * during directory iteration - this is not an error */
+ return r;
+ }
+
+ while ((entry = readdir(dir))) {
+ int devaddr;
+
+ if (entry->d_name[0] == '.')
+ continue;
+
+ devaddr = atoi(entry->d_name);
+ if (devaddr == 0) {
+ usbi_dbg("unknown dir entry %s", entry->d_name);
+ continue;
+ }
+
+ if (linux_enumerate_device(ctx, busnum, (uint8_t) devaddr, NULL)) {
+ usbi_dbg("failed to enumerate dir entry %s", entry->d_name);
+ continue;
+ }
+
+ r = 0;
+ }
+
+ closedir(dir);
+ return r;
+}
+
+static int usbfs_get_device_list(struct libusb_context *ctx)
+{
+ struct dirent *entry;
+ DIR *buses = opendir(usbfs_path);
+ int r = 0;
+
+ if (!buses) {
+ usbi_err(ctx, "opendir buses failed errno=%d", errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ while ((entry = readdir(buses))) {
+ int busnum;
+
+ if (entry->d_name[0] == '.')
+ continue;
+
+ if (usbdev_names) {
+ int devaddr;
+ if (!_is_usbdev_entry(entry, &busnum, &devaddr))
+ continue;
+
+ r = linux_enumerate_device(ctx, busnum, (uint8_t) devaddr, NULL);
+ if (r < 0) {
+ usbi_dbg("failed to enumerate dir entry %s", entry->d_name);
+ continue;
+ }
+ } else {
+ busnum = atoi(entry->d_name);
+ if (busnum == 0) {
+ usbi_dbg("unknown dir entry %s", entry->d_name);
+ continue;
+ }
+
+ r = usbfs_scan_busdir(ctx, busnum);
+ if (r < 0)
+ break;
+ }
+ }
+
+ closedir(buses);
+ return r;
+
+}
+#endif
+
+static int sysfs_scan_device(struct libusb_context *ctx, const char *devname)
+{
+ uint8_t busnum, devaddr;
+ int ret;
+
+ ret = linux_get_device_address (ctx, 0, &busnum, &devaddr, NULL, devname);
+ if (LIBUSB_SUCCESS != ret) {
+ return ret;
+ }
+
+ return linux_enumerate_device(ctx, busnum & 0xff, devaddr & 0xff,
+ devname);
+}
+
+#if !defined(USE_UDEV)
+static int sysfs_get_device_list(struct libusb_context *ctx)
+{
+ DIR *devices = opendir(SYSFS_DEVICE_PATH);
+ struct dirent *entry;
+ int r = LIBUSB_ERROR_IO;
+
+ if (!devices) {
+ usbi_err(ctx, "opendir devices failed errno=%d", errno);
+ return r;
+ }
+
+ while ((entry = readdir(devices))) {
+ if ((!isdigit(entry->d_name[0]) && strncmp(entry->d_name, "usb", 3))
+ || strchr(entry->d_name, ':'))
+ continue;
+
+ if (sysfs_scan_device(ctx, entry->d_name)) {
+ usbi_dbg("failed to enumerate dir entry %s", entry->d_name);
+ continue;
+ }
+
+ r = 0;
+ }
+
+ closedir(devices);
+ return r;
+}
+
+static int linux_default_scan_devices (struct libusb_context *ctx)
+{
+ /* we can retrieve device list and descriptors from sysfs or usbfs.
+ * sysfs is preferable, because if we use usbfs we end up resuming
+ * any autosuspended USB devices. however, sysfs is not available
+ * everywhere, so we need a usbfs fallback too.
+ *
+ * as described in the "sysfs vs usbfs" comment at the top of this
+ * file, sometimes we have sysfs but not enough information to
+ * relate sysfs devices to usbfs nodes. op_init() determines the
+ * adequacy of sysfs and sets sysfs_can_relate_devices.
+ */
+ if (sysfs_can_relate_devices != 0)
+ return sysfs_get_device_list(ctx);
+ else
+ return usbfs_get_device_list(ctx);
+}
+#endif
+
+static int op_open(struct libusb_device_handle *handle)
+{
+ struct linux_device_handle_priv *hpriv = _device_handle_priv(handle);
+ int r;
+
+ hpriv->fd = _get_usbfs_fd(handle->dev, O_RDWR, 0);
+ if (hpriv->fd < 0) {
+ if (hpriv->fd == LIBUSB_ERROR_NO_DEVICE) {
+ /* device will still be marked as attached if hotplug monitor thread
+ * hasn't processed remove event yet */
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ if (handle->dev->attached) {
+ usbi_dbg("open failed with no device, but device still attached");
+ linux_device_disconnected(handle->dev->bus_number,
+ handle->dev->device_address, NULL);
+ }
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+ }
+ return hpriv->fd;
+ }
+
+ r = ioctl(hpriv->fd, IOCTL_USBFS_GET_CAPABILITIES, &hpriv->caps);
+ if (r < 0) {
+ if (errno == ENOTTY)
+ usbi_dbg("getcap not available");
+ else
+ usbi_err(HANDLE_CTX(handle), "getcap failed (%d)", errno);
+ hpriv->caps = 0;
+ if (supports_flag_zero_packet)
+ hpriv->caps |= USBFS_CAP_ZERO_PACKET;
+ if (supports_flag_bulk_continuation)
+ hpriv->caps |= USBFS_CAP_BULK_CONTINUATION;
+ }
+
+ return usbi_add_pollfd(HANDLE_CTX(handle), hpriv->fd, POLLOUT);
+}
+
+static void op_close(struct libusb_device_handle *dev_handle)
+{
+ int fd = _device_handle_priv(dev_handle)->fd;
+ usbi_remove_pollfd(HANDLE_CTX(dev_handle), fd);
+ close(fd);
+}
+
+static int op_get_configuration(struct libusb_device_handle *handle,
+ int *config)
+{
+ int r;
+
+ if (sysfs_can_relate_devices) {
+ r = sysfs_get_active_config(handle->dev, config);
+ } else {
+ r = usbfs_get_active_config(handle->dev,
+ _device_handle_priv(handle)->fd);
+ }
+ if (r < 0)
+ return r;
+
+ if (*config == -1) {
+ usbi_err(HANDLE_CTX(handle), "device unconfigured");
+ *config = 0;
+ }
+
+ return 0;
+}
+
+static int op_set_configuration(struct libusb_device_handle *handle, int config)
+{
+ struct linux_device_priv *priv = _device_priv(handle->dev);
+ int fd = _device_handle_priv(handle)->fd;
+ int r = ioctl(fd, IOCTL_USBFS_SETCONFIG, &config);
+ if (r) {
+ if (errno == EINVAL)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == EBUSY)
+ return LIBUSB_ERROR_BUSY;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle), "failed, error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ /* update our cached active config descriptor */
+ priv->active_config = config;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int claim_interface(struct libusb_device_handle *handle, int iface)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ int r = ioctl(fd, IOCTL_USBFS_CLAIMINTF, &iface);
+ if (r) {
+ if (errno == ENOENT)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == EBUSY)
+ return LIBUSB_ERROR_BUSY;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "claim interface failed, error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+ return 0;
+}
+
+static int release_interface(struct libusb_device_handle *handle, int iface)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ int r = ioctl(fd, IOCTL_USBFS_RELEASEINTF, &iface);
+ if (r) {
+ if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "release interface failed, error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+ return 0;
+}
+
+static int op_set_interface(struct libusb_device_handle *handle, int iface,
+ int altsetting)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ struct usbfs_setinterface setintf;
+ int r;
+
+ setintf.interface = iface;
+ setintf.altsetting = altsetting;
+ r = ioctl(fd, IOCTL_USBFS_SETINTF, &setintf);
+ if (r) {
+ if (errno == EINVAL)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "setintf failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return 0;
+}
+
+static int op_clear_halt(struct libusb_device_handle *handle,
+ unsigned char endpoint)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ unsigned int _endpoint = endpoint;
+ int r = ioctl(fd, IOCTL_USBFS_CLEAR_HALT, &_endpoint);
+ if (r) {
+ if (errno == ENOENT)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "clear_halt failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return 0;
+}
+
+static int op_reset_device(struct libusb_device_handle *handle)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ int i, r, ret = 0;
+
+ /* Doing a device reset will cause the usbfs driver to get unbound
+ from any interfaces it is bound to. By voluntarily unbinding
+ the usbfs driver ourself, we stop the kernel from rebinding
+ the interface after reset (which would end up with the interface
+ getting bound to the in kernel driver if any). */
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if (handle->claimed_interfaces & (1L << i)) {
+ release_interface(handle, i);
+ }
+ }
+
+ usbi_mutex_lock(&handle->lock);
+ r = ioctl(fd, IOCTL_USBFS_RESET, NULL);
+ if (r) {
+ if (errno == ENODEV) {
+ ret = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
+
+ usbi_err(HANDLE_CTX(handle),
+ "reset failed error %d errno %d", r, errno);
+ ret = LIBUSB_ERROR_OTHER;
+ goto out;
+ }
+
+ /* And re-claim any interfaces which were claimed before the reset */
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if (handle->claimed_interfaces & (1L << i)) {
+ /*
+ * A driver may have completed modprobing during
+ * IOCTL_USBFS_RESET, and bound itself as soon as
+ * IOCTL_USBFS_RESET released the device lock
+ */
+ r = detach_kernel_driver_and_claim(handle, i);
+ if (r) {
+ usbi_warn(HANDLE_CTX(handle),
+ "failed to re-claim interface %d after reset: %s",
+ i, libusb_error_name(r));
+ handle->claimed_interfaces &= ~(1L << i);
+ ret = LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+ }
+out:
+ usbi_mutex_unlock(&handle->lock);
+ return ret;
+}
+
+static int do_streams_ioctl(struct libusb_device_handle *handle, long req,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints)
+{
+ int r, fd = _device_handle_priv(handle)->fd;
+ struct usbfs_streams *streams;
+
+ if (num_endpoints > 30) /* Max 15 in + 15 out eps */
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ streams = malloc(sizeof(struct usbfs_streams) + num_endpoints);
+ if (!streams)
+ return LIBUSB_ERROR_NO_MEM;
+
+ streams->num_streams = num_streams;
+ streams->num_eps = num_endpoints;
+ memcpy(streams->eps, endpoints, num_endpoints);
+
+ r = ioctl(fd, req, streams);
+
+ free(streams);
+
+ if (r < 0) {
+ if (errno == ENOTTY)
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ else if (errno == EINVAL)
+ return LIBUSB_ERROR_INVALID_PARAM;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "streams-ioctl failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+ return r;
+}
+
+static int op_alloc_streams(struct libusb_device_handle *handle,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints)
+{
+ return do_streams_ioctl(handle, IOCTL_USBFS_ALLOC_STREAMS,
+ num_streams, endpoints, num_endpoints);
+}
+
+static int op_free_streams(struct libusb_device_handle *handle,
+ unsigned char *endpoints, int num_endpoints)
+{
+ return do_streams_ioctl(handle, IOCTL_USBFS_FREE_STREAMS, 0,
+ endpoints, num_endpoints);
+}
+
+static int op_kernel_driver_active(struct libusb_device_handle *handle,
+ int interface)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ struct usbfs_getdriver getdrv;
+ int r;
+
+ getdrv.interface = interface;
+ r = ioctl(fd, IOCTL_USBFS_GETDRIVER, &getdrv);
+ if (r) {
+ if (errno == ENODATA)
+ return 0;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "get driver failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return (strcmp(getdrv.driver, "usbfs") == 0) ? 0 : 1;
+}
+
+static int op_detach_kernel_driver(struct libusb_device_handle *handle,
+ int interface)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ struct usbfs_ioctl command;
+ struct usbfs_getdriver getdrv;
+ int r;
+
+ command.ifno = interface;
+ command.ioctl_code = IOCTL_USBFS_DISCONNECT;
+ command.data = NULL;
+
+ getdrv.interface = interface;
+ r = ioctl(fd, IOCTL_USBFS_GETDRIVER, &getdrv);
+ if (r == 0 && strcmp(getdrv.driver, "usbfs") == 0)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ r = ioctl(fd, IOCTL_USBFS_IOCTL, &command);
+ if (r) {
+ if (errno == ENODATA)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == EINVAL)
+ return LIBUSB_ERROR_INVALID_PARAM;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle),
+ "detach failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ return 0;
+}
+
+static int op_attach_kernel_driver(struct libusb_device_handle *handle,
+ int interface)
+{
+ int fd = _device_handle_priv(handle)->fd;
+ struct usbfs_ioctl command;
+ int r;
+
+ command.ifno = interface;
+ command.ioctl_code = IOCTL_USBFS_CONNECT;
+ command.data = NULL;
+
+ r = ioctl(fd, IOCTL_USBFS_IOCTL, &command);
+ if (r < 0) {
+ if (errno == ENODATA)
+ return LIBUSB_ERROR_NOT_FOUND;
+ else if (errno == EINVAL)
+ return LIBUSB_ERROR_INVALID_PARAM;
+ else if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+ else if (errno == EBUSY)
+ return LIBUSB_ERROR_BUSY;
+
+ usbi_err(HANDLE_CTX(handle),
+ "attach failed error %d errno %d", r, errno);
+ return LIBUSB_ERROR_OTHER;
+ } else if (r == 0) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ return 0;
+}
+
+static int detach_kernel_driver_and_claim(struct libusb_device_handle *handle,
+ int interface)
+{
+ struct usbfs_disconnect_claim dc;
+ int r, fd = _device_handle_priv(handle)->fd;
+
+ dc.interface = interface;
+ strcpy(dc.driver, "usbfs");
+ dc.flags = USBFS_DISCONNECT_CLAIM_EXCEPT_DRIVER;
+ r = ioctl(fd, IOCTL_USBFS_DISCONNECT_CLAIM, &dc);
+ if (r == 0 || (r != 0 && errno != ENOTTY)) {
+ if (r == 0)
+ return 0;
+
+ switch (errno) {
+ case EBUSY:
+ return LIBUSB_ERROR_BUSY;
+ case EINVAL:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case ENODEV:
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ usbi_err(HANDLE_CTX(handle),
+ "disconnect-and-claim failed errno %d", errno);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ /* Fallback code for kernels which don't support the
+ disconnect-and-claim ioctl */
+ r = op_detach_kernel_driver(handle, interface);
+ if (r != 0 && r != LIBUSB_ERROR_NOT_FOUND)
+ return r;
+
+ return claim_interface(handle, interface);
+}
+
+static int op_claim_interface(struct libusb_device_handle *handle, int iface)
+{
+ if (handle->auto_detach_kernel_driver)
+ return detach_kernel_driver_and_claim(handle, iface);
+ else
+ return claim_interface(handle, iface);
+}
+
+static int op_release_interface(struct libusb_device_handle *handle, int iface)
+{
+ int r;
+
+ r = release_interface(handle, iface);
+ if (r)
+ return r;
+
+ if (handle->auto_detach_kernel_driver)
+ op_attach_kernel_driver(handle, iface);
+
+ return 0;
+}
+
+static void op_destroy_device(struct libusb_device *dev)
+{
+ struct linux_device_priv *priv = _device_priv(dev);
+ if (priv->descriptors)
+ free(priv->descriptors);
+ if (priv->sysfs_dir)
+ free(priv->sysfs_dir);
+}
+
+/* URBs are discarded in reverse order of submission to avoid races. */
+static int discard_urbs(struct usbi_transfer *itransfer, int first, int last_plus_one)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_transfer_priv *tpriv =
+ usbi_transfer_get_os_priv(itransfer);
+ struct linux_device_handle_priv *dpriv =
+ _device_handle_priv(transfer->dev_handle);
+ int i, ret = 0;
+ struct usbfs_urb *urb;
+
+ for (i = last_plus_one - 1; i >= first; i--) {
+ if (LIBUSB_TRANSFER_TYPE_ISOCHRONOUS == transfer->type)
+ urb = tpriv->iso_urbs[i];
+ else
+ urb = &tpriv->urbs[i];
+
+ if (0 == ioctl(dpriv->fd, IOCTL_USBFS_DISCARDURB, urb))
+ continue;
+
+ if (EINVAL == errno) {
+ usbi_dbg("URB not found --> assuming ready to be reaped");
+ if (i == (last_plus_one - 1))
+ ret = LIBUSB_ERROR_NOT_FOUND;
+ } else if (ENODEV == errno) {
+ usbi_dbg("Device not found for URB --> assuming ready to be reaped");
+ ret = LIBUSB_ERROR_NO_DEVICE;
+ } else {
+ usbi_warn(TRANSFER_CTX(transfer),
+ "unrecognised discard errno %d", errno);
+ ret = LIBUSB_ERROR_OTHER;
+ }
+ }
+ return ret;
+}
+
+static void free_iso_urbs(struct linux_transfer_priv *tpriv)
+{
+ int i;
+ for (i = 0; i < tpriv->num_urbs; i++) {
+ struct usbfs_urb *urb = tpriv->iso_urbs[i];
+ if (!urb)
+ break;
+ free(urb);
+ }
+
+ free(tpriv->iso_urbs);
+ tpriv->iso_urbs = NULL;
+}
+
+static int submit_bulk_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ struct linux_device_handle_priv *dpriv =
+ _device_handle_priv(transfer->dev_handle);
+ struct usbfs_urb *urbs;
+ int is_out = (transfer->endpoint & LIBUSB_ENDPOINT_DIR_MASK)
+ == LIBUSB_ENDPOINT_OUT;
+ int bulk_buffer_len, use_bulk_continuation;
+ int r;
+ int i;
+
+ if (is_out && (transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET) &&
+ !(dpriv->caps & USBFS_CAP_ZERO_PACKET))
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+
+ /*
+ * Older versions of usbfs place a 16kb limit on bulk URBs. We work
+ * around this by splitting large transfers into 16k blocks, and then
+ * submit all urbs at once. it would be simpler to submit one urb at
+ * a time, but there is a big performance gain doing it this way.
+ *
+ * Newer versions lift the 16k limit (USBFS_CAP_NO_PACKET_SIZE_LIM),
+ * using arbritary large transfers can still be a bad idea though, as
+ * the kernel needs to allocate physical contiguous memory for this,
+ * which may fail for large buffers.
+ *
+ * The kernel solves this problem by splitting the transfer into
+ * blocks itself when the host-controller is scatter-gather capable
+ * (USBFS_CAP_BULK_SCATTER_GATHER), which most controllers are.
+ *
+ * Last, there is the issue of short-transfers when splitting, for
+ * short split-transfers to work reliable USBFS_CAP_BULK_CONTINUATION
+ * is needed, but this is not always available.
+ */
+ if (dpriv->caps & USBFS_CAP_BULK_SCATTER_GATHER) {
+ /* Good! Just submit everything in one go */
+ bulk_buffer_len = transfer->length ? transfer->length : 1;
+ use_bulk_continuation = 0;
+ } else if (dpriv->caps & USBFS_CAP_BULK_CONTINUATION) {
+ /* Split the transfers and use bulk-continuation to
+ avoid issues with short-transfers */
+ bulk_buffer_len = MAX_BULK_BUFFER_LENGTH;
+ use_bulk_continuation = 1;
+ } else if (dpriv->caps & USBFS_CAP_NO_PACKET_SIZE_LIM) {
+ /* Don't split, assume the kernel can alloc the buffer
+ (otherwise the submit will fail with -ENOMEM) */
+ bulk_buffer_len = transfer->length ? transfer->length : 1;
+ use_bulk_continuation = 0;
+ } else {
+ /* Bad, splitting without bulk-continuation, short transfers
+ which end before the last urb will not work reliable! */
+ /* Note we don't warn here as this is "normal" on kernels <
+ 2.6.32 and not a problem for most applications */
+ bulk_buffer_len = MAX_BULK_BUFFER_LENGTH;
+ use_bulk_continuation = 0;
+ }
+
+ int num_urbs = transfer->length / bulk_buffer_len;
+ int last_urb_partial = 0;
+
+ if (transfer->length == 0) {
+ num_urbs = 1;
+ } else if ((transfer->length % bulk_buffer_len) > 0) {
+ last_urb_partial = 1;
+ num_urbs++;
+ }
+ usbi_dbg("need %d urbs for new transfer with length %d", num_urbs,
+ transfer->length);
+ urbs = calloc(num_urbs, sizeof(struct usbfs_urb));
+ if (!urbs)
+ return LIBUSB_ERROR_NO_MEM;
+ tpriv->urbs = urbs;
+ tpriv->num_urbs = num_urbs;
+ tpriv->num_retired = 0;
+ tpriv->reap_action = NORMAL;
+ tpriv->reap_status = LIBUSB_TRANSFER_COMPLETED;
+
+ for (i = 0; i < num_urbs; i++) {
+ struct usbfs_urb *urb = &urbs[i];
+ urb->usercontext = itransfer;
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ urb->type = USBFS_URB_TYPE_BULK;
+ urb->stream_id = 0;
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ urb->type = USBFS_URB_TYPE_BULK;
+ urb->stream_id = itransfer->stream_id;
+ break;
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ urb->type = USBFS_URB_TYPE_INTERRUPT;
+ break;
+ }
+ urb->endpoint = transfer->endpoint;
+ urb->buffer = transfer->buffer + (i * bulk_buffer_len);
+ /* don't set the short not ok flag for the last URB */
+ if (use_bulk_continuation && !is_out && (i < num_urbs - 1))
+ urb->flags = USBFS_URB_SHORT_NOT_OK;
+ if (i == num_urbs - 1 && last_urb_partial)
+ urb->buffer_length = transfer->length % bulk_buffer_len;
+ else if (transfer->length == 0)
+ urb->buffer_length = 0;
+ else
+ urb->buffer_length = bulk_buffer_len;
+
+ if (i > 0 && use_bulk_continuation)
+ urb->flags |= USBFS_URB_BULK_CONTINUATION;
+
+ /* we have already checked that the flag is supported */
+ if (is_out && i == num_urbs - 1 &&
+ transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET)
+ urb->flags |= USBFS_URB_ZERO_PACKET;
+
+ r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb);
+ if (r < 0) {
+ if (errno == ENODEV) {
+ r = LIBUSB_ERROR_NO_DEVICE;
+ } else {
+ usbi_err(TRANSFER_CTX(transfer),
+ "submiturb failed error %d errno=%d", r, errno);
+ r = LIBUSB_ERROR_IO;
+ }
+
+ /* if the first URB submission fails, we can simply free up and
+ * return failure immediately. */
+ if (i == 0) {
+ usbi_dbg("first URB failed, easy peasy");
+ free(urbs);
+ tpriv->urbs = NULL;
+ return r;
+ }
+
+ /* if it's not the first URB that failed, the situation is a bit
+ * tricky. we may need to discard all previous URBs. there are
+ * complications:
+ * - discarding is asynchronous - discarded urbs will be reaped
+ * later. the user must not have freed the transfer when the
+ * discarded URBs are reaped, otherwise libusb will be using
+ * freed memory.
+ * - the earlier URBs may have completed successfully and we do
+ * not want to throw away any data.
+ * - this URB failing may be no error; EREMOTEIO means that
+ * this transfer simply didn't need all the URBs we submitted
+ * so, we report that the transfer was submitted successfully and
+ * in case of error we discard all previous URBs. later when
+ * the final reap completes we can report error to the user,
+ * or success if an earlier URB was completed successfully.
+ */
+ tpriv->reap_action = EREMOTEIO == errno ? COMPLETED_EARLY : SUBMIT_FAILED;
+
+ /* The URBs we haven't submitted yet we count as already
+ * retired. */
+ tpriv->num_retired += num_urbs - i;
+
+ /* If we completed short then don't try to discard. */
+ if (COMPLETED_EARLY == tpriv->reap_action)
+ return 0;
+
+ discard_urbs(itransfer, 0, i);
+
+ usbi_dbg("reporting successful submission but waiting for %d "
+ "discards before reporting error", i);
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+static int submit_iso_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ struct linux_device_handle_priv *dpriv =
+ _device_handle_priv(transfer->dev_handle);
+ struct usbfs_urb **urbs;
+ size_t alloc_size;
+ int num_packets = transfer->num_iso_packets;
+ int i;
+ int this_urb_len = 0;
+ int num_urbs = 1;
+ int packet_offset = 0;
+ unsigned int packet_len;
+ unsigned char *urb_buffer = transfer->buffer;
+
+ /* usbfs places arbitrary limits on iso URBs. this limit has changed
+ * at least three times, and it's difficult to accurately detect which
+ * limit this running kernel might impose. so we attempt to submit
+ * whatever the user has provided. if the kernel rejects the request
+ * due to its size, we return an error indicating such to the user.
+ */
+
+ /* calculate how many URBs we need */
+ for (i = 0; i < num_packets; i++) {
+ unsigned int space_remaining = MAX_ISO_BUFFER_LENGTH - this_urb_len;
+ packet_len = transfer->iso_packet_desc[i].length;
+
+ if (packet_len > space_remaining) {
+ num_urbs++;
+ this_urb_len = packet_len;
+ /* check that we can actually support this packet length */
+ if (this_urb_len > MAX_ISO_BUFFER_LENGTH)
+ return LIBUSB_ERROR_INVALID_PARAM;
+ } else {
+ this_urb_len += packet_len;
+ }
+ }
+ usbi_dbg("need %d %dk URBs for transfer", num_urbs, MAX_ISO_BUFFER_LENGTH / 1024);
+
+ urbs = calloc(num_urbs, sizeof(*urbs));
+ if (!urbs)
+ return LIBUSB_ERROR_NO_MEM;
+
+ tpriv->iso_urbs = urbs;
+ tpriv->num_urbs = num_urbs;
+ tpriv->num_retired = 0;
+ tpriv->reap_action = NORMAL;
+ tpriv->iso_packet_offset = 0;
+
+ /* allocate + initialize each URB with the correct number of packets */
+ for (i = 0; i < num_urbs; i++) {
+ struct usbfs_urb *urb;
+ unsigned int space_remaining_in_urb = MAX_ISO_BUFFER_LENGTH;
+ int urb_packet_offset = 0;
+ unsigned char *urb_buffer_orig = urb_buffer;
+ int j;
+ int k;
+
+ /* swallow up all the packets we can fit into this URB */
+ while (packet_offset < transfer->num_iso_packets) {
+ packet_len = transfer->iso_packet_desc[packet_offset].length;
+ if (packet_len <= space_remaining_in_urb) {
+ /* throw it in */
+ urb_packet_offset++;
+ packet_offset++;
+ space_remaining_in_urb -= packet_len;
+ urb_buffer += packet_len;
+ } else {
+ /* it can't fit, save it for the next URB */
+ break;
+ }
+ }
+
+ alloc_size = sizeof(*urb)
+ + (urb_packet_offset * sizeof(struct usbfs_iso_packet_desc));
+ urb = calloc(1, alloc_size);
+ if (!urb) {
+ free_iso_urbs(tpriv);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ urbs[i] = urb;
+
+ /* populate packet lengths */
+ for (j = 0, k = packet_offset - urb_packet_offset;
+ k < packet_offset; k++, j++) {
+ packet_len = transfer->iso_packet_desc[k].length;
+ urb->iso_frame_desc[j].length = packet_len;
+ }
+
+ urb->usercontext = itransfer;
+ urb->type = USBFS_URB_TYPE_ISO;
+ /* FIXME: interface for non-ASAP data? */
+ urb->flags = USBFS_URB_ISO_ASAP;
+ urb->endpoint = transfer->endpoint;
+ urb->number_of_packets = urb_packet_offset;
+ urb->buffer = urb_buffer_orig;
+ }
+
+ /* submit URBs */
+ for (i = 0; i < num_urbs; i++) {
+ int r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urbs[i]);
+ if (r < 0) {
+ if (errno == ENODEV) {
+ r = LIBUSB_ERROR_NO_DEVICE;
+ } else if (errno == EINVAL) {
+ usbi_warn(TRANSFER_CTX(transfer),
+ "submiturb failed, transfer too large");
+ r = LIBUSB_ERROR_INVALID_PARAM;
+ } else {
+ usbi_err(TRANSFER_CTX(transfer),
+ "submiturb failed error %d errno=%d", r, errno);
+ r = LIBUSB_ERROR_IO;
+ }
+
+ /* if the first URB submission fails, we can simply free up and
+ * return failure immediately. */
+ if (i == 0) {
+ usbi_dbg("first URB failed, easy peasy");
+ free_iso_urbs(tpriv);
+ return r;
+ }
+
+ /* if it's not the first URB that failed, the situation is a bit
+ * tricky. we must discard all previous URBs. there are
+ * complications:
+ * - discarding is asynchronous - discarded urbs will be reaped
+ * later. the user must not have freed the transfer when the
+ * discarded URBs are reaped, otherwise libusb will be using
+ * freed memory.
+ * - the earlier URBs may have completed successfully and we do
+ * not want to throw away any data.
+ * so, in this case we discard all the previous URBs BUT we report
+ * that the transfer was submitted successfully. then later when
+ * the final discard completes we can report error to the user.
+ */
+ tpriv->reap_action = SUBMIT_FAILED;
+
+ /* The URBs we haven't submitted yet we count as already
+ * retired. */
+ tpriv->num_retired = num_urbs - i;
+ discard_urbs(itransfer, 0, i);
+
+ usbi_dbg("reporting successful submission but waiting for %d "
+ "discards before reporting error", i);
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+static int submit_control_transfer(struct usbi_transfer *itransfer)
+{
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_device_handle_priv *dpriv =
+ _device_handle_priv(transfer->dev_handle);
+ struct usbfs_urb *urb;
+ int r;
+
+ if (transfer->length - LIBUSB_CONTROL_SETUP_SIZE > MAX_CTRL_BUFFER_LENGTH)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ urb = calloc(1, sizeof(struct usbfs_urb));
+ if (!urb)
+ return LIBUSB_ERROR_NO_MEM;
+ tpriv->urbs = urb;
+ tpriv->num_urbs = 1;
+ tpriv->reap_action = NORMAL;
+
+ urb->usercontext = itransfer;
+ urb->type = USBFS_URB_TYPE_CONTROL;
+ urb->endpoint = transfer->endpoint;
+ urb->buffer = transfer->buffer;
+ urb->buffer_length = transfer->length;
+
+ r = ioctl(dpriv->fd, IOCTL_USBFS_SUBMITURB, urb);
+ if (r < 0) {
+ free(urb);
+ tpriv->urbs = NULL;
+ if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(TRANSFER_CTX(transfer),
+ "submiturb failed error %d errno=%d", r, errno);
+ return LIBUSB_ERROR_IO;
+ }
+ return 0;
+}
+
+static int op_submit_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return submit_control_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ return submit_bulk_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ return submit_bulk_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return submit_iso_transfer(itransfer);
+ default:
+ usbi_err(TRANSFER_CTX(transfer),
+ "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static int op_cancel_transfer(struct usbi_transfer *itransfer)
+{
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ int r;
+
+ if (!tpriv->urbs)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ r = discard_urbs(itransfer, 0, tpriv->num_urbs);
+ if (r != 0)
+ return r;
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ if (tpriv->reap_action == ERROR)
+ break;
+ /* else, fall through */
+ default:
+ tpriv->reap_action = CANCELLED;
+ }
+
+ return 0;
+}
+
+static void op_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+
+ /* urbs can be freed also in submit_transfer so lock mutex first */
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ if (tpriv->urbs) {
+ free(tpriv->urbs);
+ tpriv->urbs = NULL;
+ }
+ break;
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ if (tpriv->iso_urbs) {
+ free_iso_urbs(tpriv);
+ tpriv->iso_urbs = NULL;
+ }
+ break;
+ default:
+ usbi_err(TRANSFER_CTX(transfer),
+ "unknown endpoint type %d", transfer->type);
+ }
+}
+
+static int handle_bulk_completion(struct usbi_transfer *itransfer,
+ struct usbfs_urb *urb)
+{
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ int urb_idx = urb - tpriv->urbs;
+
+ usbi_mutex_lock(&itransfer->lock);
+ usbi_dbg("handling completion status %d of bulk urb %d/%d", urb->status,
+ urb_idx + 1, tpriv->num_urbs);
+
+ tpriv->num_retired++;
+
+ if (tpriv->reap_action != NORMAL) {
+ /* cancelled, submit_fail, or completed early */
+ usbi_dbg("abnormal reap: urb status %d", urb->status);
+
+ /* even though we're in the process of cancelling, it's possible that
+ * we may receive some data in these URBs that we don't want to lose.
+ * examples:
+ * 1. while the kernel is cancelling all the packets that make up an
+ * URB, a few of them might complete. so we get back a successful
+ * cancellation *and* some data.
+ * 2. we receive a short URB which marks the early completion condition,
+ * so we start cancelling the remaining URBs. however, we're too
+ * slow and another URB completes (or at least completes partially).
+ * (this can't happen since we always use BULK_CONTINUATION.)
+ *
+ * When this happens, our objectives are not to lose any "surplus" data,
+ * and also to stick it at the end of the previously-received data
+ * (closing any holes), so that libusb reports the total amount of
+ * transferred data and presents it in a contiguous chunk.
+ */
+ if (urb->actual_length > 0) {
+ unsigned char *target = transfer->buffer + itransfer->transferred;
+ usbi_dbg("received %d bytes of surplus data", urb->actual_length);
+ if (urb->buffer != target) {
+ usbi_dbg("moving surplus data from offset %d to offset %d",
+ (unsigned char *) urb->buffer - transfer->buffer,
+ target - transfer->buffer);
+ memmove(target, urb->buffer, urb->actual_length);
+ }
+ itransfer->transferred += urb->actual_length;
+ }
+
+ if (tpriv->num_retired == tpriv->num_urbs) {
+ usbi_dbg("abnormal reap: last URB handled, reporting");
+ if (tpriv->reap_action != COMPLETED_EARLY &&
+ tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+ tpriv->reap_status = LIBUSB_TRANSFER_ERROR;
+ goto completed;
+ }
+ goto out_unlock;
+ }
+
+ itransfer->transferred += urb->actual_length;
+
+ /* Many of these errors can occur on *any* urb of a multi-urb
+ * transfer. When they do, we tear down the rest of the transfer.
+ */
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EREMOTEIO: /* short transfer */
+ break;
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET:
+ break;
+ case -ENODEV:
+ case -ESHUTDOWN:
+ usbi_dbg("device removed");
+ tpriv->reap_status = LIBUSB_TRANSFER_NO_DEVICE;
+ goto cancel_remaining;
+ case -EPIPE:
+ usbi_dbg("detected endpoint stall");
+ if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+ tpriv->reap_status = LIBUSB_TRANSFER_STALL;
+ goto cancel_remaining;
+ case -EOVERFLOW:
+ /* overflow can only ever occur in the last urb */
+ usbi_dbg("overflow, actual_length=%d", urb->actual_length);
+ if (tpriv->reap_status == LIBUSB_TRANSFER_COMPLETED)
+ tpriv->reap_status = LIBUSB_TRANSFER_OVERFLOW;
+ goto completed;
+ case -ETIME:
+ case -EPROTO:
+ case -EILSEQ:
+ case -ECOMM:
+ case -ENOSR:
+ usbi_dbg("low level error %d", urb->status);
+ tpriv->reap_action = ERROR;
+ goto cancel_remaining;
+ default:
+ usbi_warn(ITRANSFER_CTX(itransfer),
+ "unrecognised urb status %d", urb->status);
+ tpriv->reap_action = ERROR;
+ goto cancel_remaining;
+ }
+
+ /* if we're the last urb or we got less data than requested then we're
+ * done */
+ if (urb_idx == tpriv->num_urbs - 1) {
+ usbi_dbg("last URB in transfer --> complete!");
+ goto completed;
+ } else if (urb->actual_length < urb->buffer_length) {
+ usbi_dbg("short transfer %d/%d --> complete!",
+ urb->actual_length, urb->buffer_length);
+ if (tpriv->reap_action == NORMAL)
+ tpriv->reap_action = COMPLETED_EARLY;
+ } else
+ goto out_unlock;
+
+cancel_remaining:
+ if (ERROR == tpriv->reap_action && LIBUSB_TRANSFER_COMPLETED == tpriv->reap_status)
+ tpriv->reap_status = LIBUSB_TRANSFER_ERROR;
+
+ if (tpriv->num_retired == tpriv->num_urbs) /* nothing to cancel */
+ goto completed;
+
+ /* cancel remaining urbs and wait for their completion before
+ * reporting results */
+ discard_urbs(itransfer, urb_idx + 1, tpriv->num_urbs);
+
+out_unlock:
+ usbi_mutex_unlock(&itransfer->lock);
+ return 0;
+
+completed:
+ free(tpriv->urbs);
+ tpriv->urbs = NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+ return CANCELLED == tpriv->reap_action ?
+ usbi_handle_transfer_cancellation(itransfer) :
+ usbi_handle_transfer_completion(itransfer, tpriv->reap_status);
+}
+
+static int handle_iso_completion(struct usbi_transfer *itransfer,
+ struct usbfs_urb *urb)
+{
+ struct libusb_transfer *transfer =
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ int num_urbs = tpriv->num_urbs;
+ int urb_idx = 0;
+ int i;
+ enum libusb_transfer_status status = LIBUSB_TRANSFER_COMPLETED;
+
+ usbi_mutex_lock(&itransfer->lock);
+ for (i = 0; i < num_urbs; i++) {
+ if (urb == tpriv->iso_urbs[i]) {
+ urb_idx = i + 1;
+ break;
+ }
+ }
+ if (urb_idx == 0) {
+ usbi_err(TRANSFER_CTX(transfer), "could not locate urb!");
+ usbi_mutex_unlock(&itransfer->lock);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg("handling completion status %d of iso urb %d/%d", urb->status,
+ urb_idx, num_urbs);
+
+ /* copy isochronous results back in */
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ struct usbfs_iso_packet_desc *urb_desc = &urb->iso_frame_desc[i];
+ struct libusb_iso_packet_descriptor *lib_desc =
+ &transfer->iso_packet_desc[tpriv->iso_packet_offset++];
+ lib_desc->status = LIBUSB_TRANSFER_COMPLETED;
+ switch (urb_desc->status) {
+ case 0:
+ break;
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET:
+ break;
+ case -ENODEV:
+ case -ESHUTDOWN:
+ usbi_dbg("device removed");
+ lib_desc->status = LIBUSB_TRANSFER_NO_DEVICE;
+ break;
+ case -EPIPE:
+ usbi_dbg("detected endpoint stall");
+ lib_desc->status = LIBUSB_TRANSFER_STALL;
+ break;
+ case -EOVERFLOW:
+ usbi_dbg("overflow error");
+ lib_desc->status = LIBUSB_TRANSFER_OVERFLOW;
+ break;
+ case -ETIME:
+ case -EPROTO:
+ case -EILSEQ:
+ case -ECOMM:
+ case -ENOSR:
+ case -EXDEV:
+ usbi_dbg("low-level USB error %d", urb_desc->status);
+ lib_desc->status = LIBUSB_TRANSFER_ERROR;
+ break;
+ default:
+ usbi_warn(TRANSFER_CTX(transfer),
+ "unrecognised urb status %d", urb_desc->status);
+ lib_desc->status = LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+ lib_desc->actual_length = urb_desc->actual_length;
+ }
+
+ tpriv->num_retired++;
+
+ if (tpriv->reap_action != NORMAL) { /* cancelled or submit_fail */
+ usbi_dbg("CANCEL: urb status %d", urb->status);
+
+ if (tpriv->num_retired == num_urbs) {
+ usbi_dbg("CANCEL: last URB handled, reporting");
+ free_iso_urbs(tpriv);
+ if (tpriv->reap_action == CANCELLED) {
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_cancellation(itransfer);
+ } else {
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_completion(itransfer,
+ LIBUSB_TRANSFER_ERROR);
+ }
+ }
+ goto out;
+ }
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET:
+ break;
+ case -ESHUTDOWN:
+ usbi_dbg("device removed");
+ status = LIBUSB_TRANSFER_NO_DEVICE;
+ break;
+ default:
+ usbi_warn(TRANSFER_CTX(transfer),
+ "unrecognised urb status %d", urb->status);
+ status = LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+
+ /* if we're the last urb then we're done */
+ if (urb_idx == num_urbs) {
+ usbi_dbg("last URB in transfer --> complete!");
+ free_iso_urbs(tpriv);
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_completion(itransfer, status);
+ }
+
+out:
+ usbi_mutex_unlock(&itransfer->lock);
+ return 0;
+}
+
+static int handle_control_completion(struct usbi_transfer *itransfer,
+ struct usbfs_urb *urb)
+{
+ struct linux_transfer_priv *tpriv = usbi_transfer_get_os_priv(itransfer);
+ int status;
+
+ usbi_mutex_lock(&itransfer->lock);
+ usbi_dbg("handling completion status %d", urb->status);
+
+ itransfer->transferred += urb->actual_length;
+
+ if (tpriv->reap_action == CANCELLED) {
+ if (urb->status != 0 && urb->status != -ENOENT)
+ usbi_warn(ITRANSFER_CTX(itransfer),
+ "cancel: unrecognised urb status %d", urb->status);
+ free(tpriv->urbs);
+ tpriv->urbs = NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_cancellation(itransfer);
+ }
+
+ switch (urb->status) {
+ case 0:
+ status = LIBUSB_TRANSFER_COMPLETED;
+ break;
+ case -ENOENT: /* cancelled */
+ status = LIBUSB_TRANSFER_CANCELLED;
+ break;
+ case -ENODEV:
+ case -ESHUTDOWN:
+ usbi_dbg("device removed");
+ status = LIBUSB_TRANSFER_NO_DEVICE;
+ break;
+ case -EPIPE:
+ usbi_dbg("unsupported control request");
+ status = LIBUSB_TRANSFER_STALL;
+ break;
+ case -EOVERFLOW:
+ usbi_dbg("control overflow error");
+ status = LIBUSB_TRANSFER_OVERFLOW;
+ break;
+ case -ETIME:
+ case -EPROTO:
+ case -EILSEQ:
+ case -ECOMM:
+ case -ENOSR:
+ usbi_dbg("low-level bus error occurred");
+ status = LIBUSB_TRANSFER_ERROR;
+ break;
+ default:
+ usbi_warn(ITRANSFER_CTX(itransfer),
+ "unrecognised urb status %d", urb->status);
+ status = LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+
+ free(tpriv->urbs);
+ tpriv->urbs = NULL;
+ usbi_mutex_unlock(&itransfer->lock);
+ return usbi_handle_transfer_completion(itransfer, status);
+}
+
+static int reap_for_handle(struct libusb_device_handle *handle)
+{
+ struct linux_device_handle_priv *hpriv = _device_handle_priv(handle);
+ int r;
+ struct usbfs_urb *urb;
+ struct usbi_transfer *itransfer;
+ struct libusb_transfer *transfer;
+
+ r = ioctl(hpriv->fd, IOCTL_USBFS_REAPURBNDELAY, &urb);
+ if (r == -1 && errno == EAGAIN)
+ return 1;
+ if (r < 0) {
+ if (errno == ENODEV)
+ return LIBUSB_ERROR_NO_DEVICE;
+
+ usbi_err(HANDLE_CTX(handle), "reap failed error %d errno=%d",
+ r, errno);
+ return LIBUSB_ERROR_IO;
+ }
+
+ itransfer = urb->usercontext;
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ usbi_dbg("urb type=%d status=%d transferred=%d", urb->type, urb->status,
+ urb->actual_length);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return handle_iso_completion(itransfer, urb);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ return handle_bulk_completion(itransfer, urb);
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return handle_control_completion(itransfer, urb);
+ default:
+ usbi_err(HANDLE_CTX(handle), "unrecognised endpoint type %x",
+ transfer->type);
+ return LIBUSB_ERROR_OTHER;
+ }
+}
+
+static int op_handle_events(struct libusb_context *ctx,
+ struct pollfd *fds, POLL_NFDS_TYPE nfds, int num_ready)
+{
+ int r;
+ unsigned int i = 0;
+
+ usbi_mutex_lock(&ctx->open_devs_lock);
+ for (i = 0; i < nfds && num_ready > 0; i++) {
+ struct pollfd *pollfd = &fds[i];
+ struct libusb_device_handle *handle;
+ struct linux_device_handle_priv *hpriv = NULL;
+
+ if (!pollfd->revents)
+ continue;
+
+ num_ready--;
+ list_for_each_entry(handle, &ctx->open_devs, list, struct libusb_device_handle) {
+ hpriv = _device_handle_priv(handle);
+ if (hpriv->fd == pollfd->fd)
+ break;
+ }
+
+ if (!hpriv || hpriv->fd != pollfd->fd) {
+ usbi_err(ctx, "cannot find handle for fd %d",
+ pollfd->fd);
+ continue;
+ }
+
+ if (pollfd->revents & POLLERR) {
+ usbi_remove_pollfd(HANDLE_CTX(handle), hpriv->fd);
+ usbi_handle_disconnect(handle);
+ /* device will still be marked as attached if hotplug monitor thread
+ * hasn't processed remove event yet */
+ usbi_mutex_static_lock(&linux_hotplug_lock);
+ if (handle->dev->attached)
+ linux_device_disconnected(handle->dev->bus_number,
+ handle->dev->device_address, NULL);
+ usbi_mutex_static_unlock(&linux_hotplug_lock);
+ continue;
+ }
+
+ do {
+ r = reap_for_handle(handle);
+ } while (r == 0);
+ if (r == 1 || r == LIBUSB_ERROR_NO_DEVICE)
+ continue;
+ else if (r < 0)
+ goto out;
+ }
+
+ r = 0;
+out:
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ return r;
+}
+
+static int op_clock_gettime(int clk_id, struct timespec *tp)
+{
+ switch (clk_id) {
+ case USBI_CLOCK_MONOTONIC:
+ return clock_gettime(monotonic_clkid, tp);
+ case USBI_CLOCK_REALTIME:
+ return clock_gettime(CLOCK_REALTIME, tp);
+ default:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+#ifdef USBI_TIMERFD_AVAILABLE
+static clockid_t op_get_timerfd_clockid(void)
+{
+ return monotonic_clkid;
+
+}
+#endif
+
+const struct usbi_os_backend linux_usbfs_backend = {
+ .name = "Linux usbfs",
+ .caps = USBI_CAP_HAS_HID_ACCESS|USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER,
+ .init = op_init,
+ .exit = op_exit,
+ .get_device_list = NULL,
+ .hotplug_poll = op_hotplug_poll,
+ .get_device_descriptor = op_get_device_descriptor,
+ .get_active_config_descriptor = op_get_active_config_descriptor,
+ .get_config_descriptor = op_get_config_descriptor,
+ .get_config_descriptor_by_value = op_get_config_descriptor_by_value,
+
+ .open = op_open,
+ .close = op_close,
+ .get_configuration = op_get_configuration,
+ .set_configuration = op_set_configuration,
+ .claim_interface = op_claim_interface,
+ .release_interface = op_release_interface,
+
+ .set_interface_altsetting = op_set_interface,
+ .clear_halt = op_clear_halt,
+ .reset_device = op_reset_device,
+
+ .alloc_streams = op_alloc_streams,
+ .free_streams = op_free_streams,
+
+ .kernel_driver_active = op_kernel_driver_active,
+ .detach_kernel_driver = op_detach_kernel_driver,
+ .attach_kernel_driver = op_attach_kernel_driver,
+
+ .destroy_device = op_destroy_device,
+
+ .submit_transfer = op_submit_transfer,
+ .cancel_transfer = op_cancel_transfer,
+ .clear_transfer_priv = op_clear_transfer_priv,
+
+ .handle_events = op_handle_events,
+
+ .clock_gettime = op_clock_gettime,
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ .get_timerfd_clockid = op_get_timerfd_clockid,
+#endif
+
+ .device_priv_size = sizeof(struct linux_device_priv),
+ .device_handle_priv_size = sizeof(struct linux_device_handle_priv),
+ .transfer_priv_size = sizeof(struct linux_transfer_priv),
+};
--- /dev/null
+/*
+ * usbfs header structures
+ * Copyright © 2007 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSB_USBFS_H
+#define LIBUSB_USBFS_H
+
+#include <linux/types.h>
+
+#define SYSFS_DEVICE_PATH "/sys/bus/usb/devices"
+
+struct usbfs_ctrltransfer {
+ /* keep in sync with usbdevice_fs.h:usbdevfs_ctrltransfer */
+ uint8_t bmRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+
+ uint32_t timeout; /* in milliseconds */
+
+ /* pointer to data */
+ void *data;
+};
+
+struct usbfs_bulktransfer {
+ /* keep in sync with usbdevice_fs.h:usbdevfs_bulktransfer */
+ unsigned int ep;
+ unsigned int len;
+ unsigned int timeout; /* in milliseconds */
+
+ /* pointer to data */
+ void *data;
+};
+
+struct usbfs_setinterface {
+ /* keep in sync with usbdevice_fs.h:usbdevfs_setinterface */
+ unsigned int interface;
+ unsigned int altsetting;
+};
+
+#define USBFS_MAXDRIVERNAME 255
+
+struct usbfs_getdriver {
+ unsigned int interface;
+ char driver[USBFS_MAXDRIVERNAME + 1];
+};
+
+#define USBFS_URB_SHORT_NOT_OK 0x01
+#define USBFS_URB_ISO_ASAP 0x02
+#define USBFS_URB_BULK_CONTINUATION 0x04
+#define USBFS_URB_QUEUE_BULK 0x10
+#define USBFS_URB_ZERO_PACKET 0x40
+
+enum usbfs_urb_type {
+ USBFS_URB_TYPE_ISO = 0,
+ USBFS_URB_TYPE_INTERRUPT = 1,
+ USBFS_URB_TYPE_CONTROL = 2,
+ USBFS_URB_TYPE_BULK = 3,
+};
+
+struct usbfs_iso_packet_desc {
+ unsigned int length;
+ unsigned int actual_length;
+ unsigned int status;
+};
+
+#define MAX_ISO_BUFFER_LENGTH 49152 * 128
+#define MAX_BULK_BUFFER_LENGTH 16384
+#define MAX_CTRL_BUFFER_LENGTH 4096
+
+struct usbfs_urb {
+ unsigned char type;
+ unsigned char endpoint;
+ int status;
+ unsigned int flags;
+ void *buffer;
+ int buffer_length;
+ int actual_length;
+ int start_frame;
+ union {
+ int number_of_packets; /* Only used for isoc urbs */
+ unsigned int stream_id; /* Only used with bulk streams */
+ };
+ int error_count;
+ unsigned int signr;
+ void *usercontext;
+ struct usbfs_iso_packet_desc iso_frame_desc[0];
+};
+
+struct usbfs_connectinfo {
+ unsigned int devnum;
+ unsigned char slow;
+};
+
+struct usbfs_ioctl {
+ int ifno; /* interface 0..N ; negative numbers reserved */
+ int ioctl_code; /* MUST encode size + direction of data so the
+ * macros in <asm/ioctl.h> give correct values */
+ void *data; /* param buffer (in, or out) */
+};
+
+struct usbfs_hub_portinfo {
+ unsigned char numports;
+ unsigned char port[127]; /* port to device num mapping */
+};
+
+#define USBFS_CAP_ZERO_PACKET 0x01
+#define USBFS_CAP_BULK_CONTINUATION 0x02
+#define USBFS_CAP_NO_PACKET_SIZE_LIM 0x04
+#define USBFS_CAP_BULK_SCATTER_GATHER 0x08
+
+#define USBFS_DISCONNECT_CLAIM_IF_DRIVER 0x01
+#define USBFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02
+
+struct usbfs_disconnect_claim {
+ unsigned int interface;
+ unsigned int flags;
+ char driver[USBFS_MAXDRIVERNAME + 1];
+};
+
+struct usbfs_streams {
+ unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */
+ unsigned int num_eps;
+ unsigned char eps[0];
+};
+
+#define IOCTL_USBFS_CONTROL _IOWR('U', 0, struct usbfs_ctrltransfer)
+#define IOCTL_USBFS_BULK _IOWR('U', 2, struct usbfs_bulktransfer)
+#define IOCTL_USBFS_RESETEP _IOR('U', 3, unsigned int)
+#define IOCTL_USBFS_SETINTF _IOR('U', 4, struct usbfs_setinterface)
+#define IOCTL_USBFS_SETCONFIG _IOR('U', 5, unsigned int)
+#define IOCTL_USBFS_GETDRIVER _IOW('U', 8, struct usbfs_getdriver)
+#define IOCTL_USBFS_SUBMITURB _IOR('U', 10, struct usbfs_urb)
+#define IOCTL_USBFS_DISCARDURB _IO('U', 11)
+#define IOCTL_USBFS_REAPURB _IOW('U', 12, void *)
+#define IOCTL_USBFS_REAPURBNDELAY _IOW('U', 13, void *)
+#define IOCTL_USBFS_CLAIMINTF _IOR('U', 15, unsigned int)
+#define IOCTL_USBFS_RELEASEINTF _IOR('U', 16, unsigned int)
+#define IOCTL_USBFS_CONNECTINFO _IOW('U', 17, struct usbfs_connectinfo)
+#define IOCTL_USBFS_IOCTL _IOWR('U', 18, struct usbfs_ioctl)
+#define IOCTL_USBFS_HUB_PORTINFO _IOR('U', 19, struct usbfs_hub_portinfo)
+#define IOCTL_USBFS_RESET _IO('U', 20)
+#define IOCTL_USBFS_CLEAR_HALT _IOR('U', 21, unsigned int)
+#define IOCTL_USBFS_DISCONNECT _IO('U', 22)
+#define IOCTL_USBFS_CONNECT _IO('U', 23)
+#define IOCTL_USBFS_CLAIM_PORT _IOR('U', 24, unsigned int)
+#define IOCTL_USBFS_RELEASE_PORT _IOR('U', 25, unsigned int)
+#define IOCTL_USBFS_GET_CAPABILITIES _IOR('U', 26, __u32)
+#define IOCTL_USBFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbfs_disconnect_claim)
+#define IOCTL_USBFS_ALLOC_STREAMS _IOR('U', 28, struct usbfs_streams)
+#define IOCTL_USBFS_FREE_STREAMS _IOR('U', 29, struct usbfs_streams)
+
+extern usbi_mutex_static_t linux_hotplug_lock;
+
+#if defined(HAVE_LIBUDEV)
+int linux_udev_start_event_monitor(void);
+int linux_udev_stop_event_monitor(void);
+int linux_udev_scan_devices(struct libusb_context *ctx);
+void linux_udev_hotplug_poll(void);
+#else
+int linux_netlink_start_event_monitor(void);
+int linux_netlink_stop_event_monitor(void);
+void linux_netlink_hotplug_poll(void);
+#endif
+
+void linux_hotplug_enumerate(uint8_t busnum, uint8_t devaddr, const char *sys_name);
+void linux_device_disconnected(uint8_t busnum, uint8_t devaddr, const char *sys_name);
+
+int linux_get_device_address (struct libusb_context *ctx, int detached,
+ uint8_t *busnum, uint8_t *devaddr, const char *dev_node,
+ const char *sys_name);
+int linux_enumerate_device(struct libusb_context *ctx,
+ uint8_t busnum, uint8_t devaddr, const char *sysfs_dir);
+
+#endif
--- /dev/null
+/*
+ * Copyright © 2011 Martin Pieuchot <mpi@openbsd.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <sys/time.h>
+#include <sys/types.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <dev/usb/usb.h>
+
+#include "libusbi.h"
+
+struct device_priv {
+ char devnode[16];
+ int fd;
+
+ unsigned char *cdesc; /* active config descriptor */
+ usb_device_descriptor_t ddesc; /* usb device descriptor */
+};
+
+struct handle_priv {
+ int endpoints[USB_MAX_ENDPOINTS];
+};
+
+/*
+ * Backend functions
+ */
+static int netbsd_get_device_list(struct libusb_context *,
+ struct discovered_devs **);
+static int netbsd_open(struct libusb_device_handle *);
+static void netbsd_close(struct libusb_device_handle *);
+
+static int netbsd_get_device_descriptor(struct libusb_device *, unsigned char *,
+ int *);
+static int netbsd_get_active_config_descriptor(struct libusb_device *,
+ unsigned char *, size_t, int *);
+static int netbsd_get_config_descriptor(struct libusb_device *, uint8_t,
+ unsigned char *, size_t, int *);
+
+static int netbsd_get_configuration(struct libusb_device_handle *, int *);
+static int netbsd_set_configuration(struct libusb_device_handle *, int);
+
+static int netbsd_claim_interface(struct libusb_device_handle *, int);
+static int netbsd_release_interface(struct libusb_device_handle *, int);
+
+static int netbsd_set_interface_altsetting(struct libusb_device_handle *, int,
+ int);
+static int netbsd_clear_halt(struct libusb_device_handle *, unsigned char);
+static int netbsd_reset_device(struct libusb_device_handle *);
+static void netbsd_destroy_device(struct libusb_device *);
+
+static int netbsd_submit_transfer(struct usbi_transfer *);
+static int netbsd_cancel_transfer(struct usbi_transfer *);
+static void netbsd_clear_transfer_priv(struct usbi_transfer *);
+static int netbsd_handle_transfer_completion(struct usbi_transfer *);
+static int netbsd_clock_gettime(int, struct timespec *);
+
+/*
+ * Private functions
+ */
+static int _errno_to_libusb(int);
+static int _cache_active_config_descriptor(struct libusb_device *, int);
+static int _sync_control_transfer(struct usbi_transfer *);
+static int _sync_gen_transfer(struct usbi_transfer *);
+static int _access_endpoint(struct libusb_transfer *);
+
+const struct usbi_os_backend netbsd_backend = {
+ "Synchronous NetBSD backend",
+ 0,
+ NULL, /* init() */
+ NULL, /* exit() */
+ netbsd_get_device_list,
+ NULL, /* hotplug_poll */
+ netbsd_open,
+ netbsd_close,
+
+ netbsd_get_device_descriptor,
+ netbsd_get_active_config_descriptor,
+ netbsd_get_config_descriptor,
+ NULL, /* get_config_descriptor_by_value() */
+
+ netbsd_get_configuration,
+ netbsd_set_configuration,
+
+ netbsd_claim_interface,
+ netbsd_release_interface,
+
+ netbsd_set_interface_altsetting,
+ netbsd_clear_halt,
+ netbsd_reset_device,
+
+ NULL, /* alloc_streams */
+ NULL, /* free_streams */
+
+ NULL, /* kernel_driver_active() */
+ NULL, /* detach_kernel_driver() */
+ NULL, /* attach_kernel_driver() */
+
+ netbsd_destroy_device,
+
+ netbsd_submit_transfer,
+ netbsd_cancel_transfer,
+ netbsd_clear_transfer_priv,
+
+ NULL, /* handle_events() */
+ netbsd_handle_transfer_completion,
+
+ netbsd_clock_gettime,
+ sizeof(struct device_priv),
+ sizeof(struct handle_priv),
+ 0, /* transfer_priv_size */
+};
+
+int
+netbsd_get_device_list(struct libusb_context * ctx,
+ struct discovered_devs **discdevs)
+{
+ struct libusb_device *dev;
+ struct device_priv *dpriv;
+ struct usb_device_info di;
+ unsigned long session_id;
+ char devnode[16];
+ int fd, err, i;
+
+ usbi_dbg("");
+
+ /* Only ugen(4) is supported */
+ for (i = 0; i < USB_MAX_DEVICES; i++) {
+ /* Control endpoint is always .00 */
+ snprintf(devnode, sizeof(devnode), "/dev/ugen%d.00", i);
+
+ if ((fd = open(devnode, O_RDONLY)) < 0) {
+ if (errno != ENOENT && errno != ENXIO)
+ usbi_err(ctx, "could not open %s", devnode);
+ continue;
+ }
+
+ if (ioctl(fd, USB_GET_DEVICEINFO, &di) < 0)
+ continue;
+
+ session_id = (di.udi_bus << 8 | di.udi_addr);
+ dev = usbi_get_device_by_session_id(ctx, session_id);
+
+ if (dev == NULL) {
+ dev = usbi_alloc_device(ctx, session_id);
+ if (dev == NULL)
+ return (LIBUSB_ERROR_NO_MEM);
+
+ dev->bus_number = di.udi_bus;
+ dev->device_address = di.udi_addr;
+ dev->speed = di.udi_speed;
+
+ dpriv = (struct device_priv *)dev->os_priv;
+ strlcpy(dpriv->devnode, devnode, sizeof(devnode));
+ dpriv->fd = -1;
+
+ if (ioctl(fd, USB_GET_DEVICE_DESC, &dpriv->ddesc) < 0) {
+ err = errno;
+ goto error;
+ }
+
+ dpriv->cdesc = NULL;
+ if (_cache_active_config_descriptor(dev, fd)) {
+ err = errno;
+ goto error;
+ }
+
+ if ((err = usbi_sanitize_device(dev)))
+ goto error;
+ }
+ close(fd);
+
+ if (discovered_devs_append(*discdevs, dev) == NULL)
+ return (LIBUSB_ERROR_NO_MEM);
+
+ libusb_unref_device(dev);
+ }
+
+ return (LIBUSB_SUCCESS);
+
+error:
+ close(fd);
+ libusb_unref_device(dev);
+ return _errno_to_libusb(err);
+}
+
+int
+netbsd_open(struct libusb_device_handle *handle)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ dpriv->fd = open(dpriv->devnode, O_RDWR);
+ if (dpriv->fd < 0) {
+ dpriv->fd = open(dpriv->devnode, O_RDONLY);
+ if (dpriv->fd < 0)
+ return _errno_to_libusb(errno);
+ }
+
+ usbi_dbg("open %s: fd %d", dpriv->devnode, dpriv->fd);
+
+ return (LIBUSB_SUCCESS);
+}
+
+void
+netbsd_close(struct libusb_device_handle *handle)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ usbi_dbg("close: fd %d", dpriv->fd);
+
+ close(dpriv->fd);
+ dpriv->fd = -1;
+}
+
+int
+netbsd_get_device_descriptor(struct libusb_device *dev, unsigned char *buf,
+ int *host_endian)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+
+ usbi_dbg("");
+
+ memcpy(buf, &dpriv->ddesc, DEVICE_DESC_LENGTH);
+
+ *host_endian = 0;
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_get_active_config_descriptor(struct libusb_device *dev,
+ unsigned char *buf, size_t len, int *host_endian)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+ usb_config_descriptor_t *ucd;
+
+ ucd = (usb_config_descriptor_t *) dpriv->cdesc;
+ len = MIN(len, UGETW(ucd->wTotalLength));
+
+ usbi_dbg("len %d", len);
+
+ memcpy(buf, dpriv->cdesc, len);
+
+ *host_endian = 0;
+
+ return len;
+}
+
+int
+netbsd_get_config_descriptor(struct libusb_device *dev, uint8_t idx,
+ unsigned char *buf, size_t len, int *host_endian)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+ struct usb_full_desc ufd;
+ int fd, err;
+
+ usbi_dbg("index %d, len %d", idx, len);
+
+ /* A config descriptor may be requested before opening the device */
+ if (dpriv->fd >= 0) {
+ fd = dpriv->fd;
+ } else {
+ fd = open(dpriv->devnode, O_RDONLY);
+ if (fd < 0)
+ return _errno_to_libusb(errno);
+ }
+
+ ufd.ufd_config_index = idx;
+ ufd.ufd_size = len;
+ ufd.ufd_data = buf;
+
+ if ((ioctl(fd, USB_GET_FULL_DESC, &ufd)) < 0) {
+ err = errno;
+ if (dpriv->fd < 0)
+ close(fd);
+ return _errno_to_libusb(err);
+ }
+
+ if (dpriv->fd < 0)
+ close(fd);
+
+ *host_endian = 0;
+
+ return len;
+}
+
+int
+netbsd_get_configuration(struct libusb_device_handle *handle, int *config)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ usbi_dbg("");
+
+ if (ioctl(dpriv->fd, USB_GET_CONFIG, config) < 0)
+ return _errno_to_libusb(errno);
+
+ usbi_dbg("configuration %d", *config);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_set_configuration(struct libusb_device_handle *handle, int config)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ usbi_dbg("configuration %d", config);
+
+ if (ioctl(dpriv->fd, USB_SET_CONFIG, &config) < 0)
+ return _errno_to_libusb(errno);
+
+ return _cache_active_config_descriptor(handle->dev, dpriv->fd);
+}
+
+int
+netbsd_claim_interface(struct libusb_device_handle *handle, int iface)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ hpriv->endpoints[i] = -1;
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_release_interface(struct libusb_device_handle *handle, int iface)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ if (hpriv->endpoints[i] >= 0)
+ close(hpriv->endpoints[i]);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_set_interface_altsetting(struct libusb_device_handle *handle, int iface,
+ int altsetting)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+ struct usb_alt_interface intf;
+
+ usbi_dbg("iface %d, setting %d", iface, altsetting);
+
+ memset(&intf, 0, sizeof(intf));
+
+ intf.uai_interface_index = iface;
+ intf.uai_alt_no = altsetting;
+
+ if (ioctl(dpriv->fd, USB_SET_ALTINTERFACE, &intf) < 0)
+ return _errno_to_libusb(errno);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_clear_halt(struct libusb_device_handle *handle, unsigned char endpoint)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+ struct usb_ctl_request req;
+
+ usbi_dbg("");
+
+ req.ucr_request.bmRequestType = UT_WRITE_ENDPOINT;
+ req.ucr_request.bRequest = UR_CLEAR_FEATURE;
+ USETW(req.ucr_request.wValue, UF_ENDPOINT_HALT);
+ USETW(req.ucr_request.wIndex, endpoint);
+ USETW(req.ucr_request.wLength, 0);
+
+ if (ioctl(dpriv->fd, USB_DO_REQUEST, &req) < 0)
+ return _errno_to_libusb(errno);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_reset_device(struct libusb_device_handle *handle)
+{
+ usbi_dbg("");
+
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+}
+
+void
+netbsd_destroy_device(struct libusb_device *dev)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+
+ usbi_dbg("");
+
+ free(dpriv->cdesc);
+}
+
+int
+netbsd_submit_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ struct handle_priv *hpriv;
+ int err = 0;
+
+ usbi_dbg("");
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ hpriv = (struct handle_priv *)transfer->dev_handle->os_priv;
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ err = _sync_control_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ if (IS_XFEROUT(transfer)) {
+ /* Isochronous write is not supported */
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+ err = _sync_gen_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ if (IS_XFEROUT(transfer) &&
+ transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET) {
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+ err = _sync_gen_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+
+ if (err)
+ return (err);
+
+ usbi_signal_transfer_completion(itransfer);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+netbsd_cancel_transfer(struct usbi_transfer *itransfer)
+{
+ usbi_dbg("");
+
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+}
+
+void
+netbsd_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+ usbi_dbg("");
+
+ /* Nothing to do */
+}
+
+int
+netbsd_handle_transfer_completion(struct usbi_transfer *itransfer)
+{
+ return usbi_handle_transfer_completion(itransfer, LIBUSB_TRANSFER_COMPLETED);
+}
+
+int
+netbsd_clock_gettime(int clkid, struct timespec *tp)
+{
+ usbi_dbg("clock %d", clkid);
+
+ if (clkid == USBI_CLOCK_REALTIME)
+ return clock_gettime(CLOCK_REALTIME, tp);
+
+ if (clkid == USBI_CLOCK_MONOTONIC)
+ return clock_gettime(CLOCK_MONOTONIC, tp);
+
+ return (LIBUSB_ERROR_INVALID_PARAM);
+}
+
+int
+_errno_to_libusb(int err)
+{
+ switch (err) {
+ case EIO:
+ return (LIBUSB_ERROR_IO);
+ case EACCES:
+ return (LIBUSB_ERROR_ACCESS);
+ case ENOENT:
+ return (LIBUSB_ERROR_NO_DEVICE);
+ case ENOMEM:
+ return (LIBUSB_ERROR_NO_MEM);
+ }
+
+ usbi_dbg("error: %s", strerror(err));
+
+ return (LIBUSB_ERROR_OTHER);
+}
+
+int
+_cache_active_config_descriptor(struct libusb_device *dev, int fd)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+ struct usb_config_desc ucd;
+ struct usb_full_desc ufd;
+ unsigned char* buf;
+ int len;
+
+ usbi_dbg("fd %d", fd);
+
+ ucd.ucd_config_index = USB_CURRENT_CONFIG_INDEX;
+
+ if ((ioctl(fd, USB_GET_CONFIG_DESC, &ucd)) < 0)
+ return _errno_to_libusb(errno);
+
+ usbi_dbg("active bLength %d", ucd.ucd_desc.bLength);
+
+ len = UGETW(ucd.ucd_desc.wTotalLength);
+ buf = malloc(len);
+ if (buf == NULL)
+ return (LIBUSB_ERROR_NO_MEM);
+
+ ufd.ufd_config_index = ucd.ucd_config_index;
+ ufd.ufd_size = len;
+ ufd.ufd_data = buf;
+
+ usbi_dbg("index %d, len %d", ufd.ufd_config_index, len);
+
+ if ((ioctl(fd, USB_GET_FULL_DESC, &ufd)) < 0) {
+ free(buf);
+ return _errno_to_libusb(errno);
+ }
+
+ if (dpriv->cdesc)
+ free(dpriv->cdesc);
+ dpriv->cdesc = buf;
+
+ return (0);
+}
+
+int
+_sync_control_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ struct libusb_control_setup *setup;
+ struct device_priv *dpriv;
+ struct usb_ctl_request req;
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ dpriv = (struct device_priv *)transfer->dev_handle->dev->os_priv;
+ setup = (struct libusb_control_setup *)transfer->buffer;
+
+ usbi_dbg("type %d request %d value %d index %d length %d timeout %d",
+ setup->bmRequestType, setup->bRequest,
+ libusb_le16_to_cpu(setup->wValue),
+ libusb_le16_to_cpu(setup->wIndex),
+ libusb_le16_to_cpu(setup->wLength), transfer->timeout);
+
+ req.ucr_request.bmRequestType = setup->bmRequestType;
+ req.ucr_request.bRequest = setup->bRequest;
+ /* Don't use USETW, libusb already deals with the endianness */
+ (*(uint16_t *)req.ucr_request.wValue) = setup->wValue;
+ (*(uint16_t *)req.ucr_request.wIndex) = setup->wIndex;
+ (*(uint16_t *)req.ucr_request.wLength) = setup->wLength;
+ req.ucr_data = transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
+
+ if ((transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) == 0)
+ req.ucr_flags = USBD_SHORT_XFER_OK;
+
+ if ((ioctl(dpriv->fd, USB_SET_TIMEOUT, &transfer->timeout)) < 0)
+ return _errno_to_libusb(errno);
+
+ if ((ioctl(dpriv->fd, USB_DO_REQUEST, &req)) < 0)
+ return _errno_to_libusb(errno);
+
+ itransfer->transferred = req.ucr_actlen;
+
+ usbi_dbg("transferred %d", itransfer->transferred);
+
+ return (0);
+}
+
+int
+_access_endpoint(struct libusb_transfer *transfer)
+{
+ struct handle_priv *hpriv;
+ struct device_priv *dpriv;
+ char *s, devnode[16];
+ int fd, endpt;
+ mode_t mode;
+
+ hpriv = (struct handle_priv *)transfer->dev_handle->os_priv;
+ dpriv = (struct device_priv *)transfer->dev_handle->dev->os_priv;
+
+ endpt = UE_GET_ADDR(transfer->endpoint);
+ mode = IS_XFERIN(transfer) ? O_RDONLY : O_WRONLY;
+
+ usbi_dbg("endpoint %d mode %d", endpt, mode);
+
+ if (hpriv->endpoints[endpt] < 0) {
+ /* Pick the right node given the control one */
+ strlcpy(devnode, dpriv->devnode, sizeof(devnode));
+ s = strchr(devnode, '.');
+ snprintf(s, 4, ".%02d", endpt);
+
+ /* We may need to read/write to the same endpoint later. */
+ if (((fd = open(devnode, O_RDWR)) < 0) && (errno == ENXIO))
+ if ((fd = open(devnode, mode)) < 0)
+ return (-1);
+
+ hpriv->endpoints[endpt] = fd;
+ }
+
+ return (hpriv->endpoints[endpt]);
+}
+
+int
+_sync_gen_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ int fd, nr = 1;
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ /*
+ * Bulk, Interrupt or Isochronous transfer depends on the
+ * endpoint and thus the node to open.
+ */
+ if ((fd = _access_endpoint(transfer)) < 0)
+ return _errno_to_libusb(errno);
+
+ if ((ioctl(fd, USB_SET_TIMEOUT, &transfer->timeout)) < 0)
+ return _errno_to_libusb(errno);
+
+ if (IS_XFERIN(transfer)) {
+ if ((transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) == 0)
+ if ((ioctl(fd, USB_SET_SHORT_XFER, &nr)) < 0)
+ return _errno_to_libusb(errno);
+
+ nr = read(fd, transfer->buffer, transfer->length);
+ } else {
+ nr = write(fd, transfer->buffer, transfer->length);
+ }
+
+ if (nr < 0)
+ return _errno_to_libusb(errno);
+
+ itransfer->transferred = nr;
+
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright © 2011-2013 Martin Pieuchot <mpi@openbsd.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <sys/time.h>
+#include <sys/types.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <dev/usb/usb.h>
+
+#include "libusbi.h"
+
+struct device_priv {
+ char *devname; /* name of the ugen(4) node */
+ int fd; /* device file descriptor */
+
+ unsigned char *cdesc; /* active config descriptor */
+ usb_device_descriptor_t ddesc; /* usb device descriptor */
+};
+
+struct handle_priv {
+ int endpoints[USB_MAX_ENDPOINTS];
+};
+
+/*
+ * Backend functions
+ */
+static int obsd_get_device_list(struct libusb_context *,
+ struct discovered_devs **);
+static int obsd_open(struct libusb_device_handle *);
+static void obsd_close(struct libusb_device_handle *);
+
+static int obsd_get_device_descriptor(struct libusb_device *, unsigned char *,
+ int *);
+static int obsd_get_active_config_descriptor(struct libusb_device *,
+ unsigned char *, size_t, int *);
+static int obsd_get_config_descriptor(struct libusb_device *, uint8_t,
+ unsigned char *, size_t, int *);
+
+static int obsd_get_configuration(struct libusb_device_handle *, int *);
+static int obsd_set_configuration(struct libusb_device_handle *, int);
+
+static int obsd_claim_interface(struct libusb_device_handle *, int);
+static int obsd_release_interface(struct libusb_device_handle *, int);
+
+static int obsd_set_interface_altsetting(struct libusb_device_handle *, int,
+ int);
+static int obsd_clear_halt(struct libusb_device_handle *, unsigned char);
+static int obsd_reset_device(struct libusb_device_handle *);
+static void obsd_destroy_device(struct libusb_device *);
+
+static int obsd_submit_transfer(struct usbi_transfer *);
+static int obsd_cancel_transfer(struct usbi_transfer *);
+static void obsd_clear_transfer_priv(struct usbi_transfer *);
+static int obsd_handle_transfer_completion(struct usbi_transfer *);
+static int obsd_clock_gettime(int, struct timespec *);
+
+/*
+ * Private functions
+ */
+static int _errno_to_libusb(int);
+static int _cache_active_config_descriptor(struct libusb_device *);
+static int _sync_control_transfer(struct usbi_transfer *);
+static int _sync_gen_transfer(struct usbi_transfer *);
+static int _access_endpoint(struct libusb_transfer *);
+
+static int _bus_open(int);
+
+
+const struct usbi_os_backend openbsd_backend = {
+ "Synchronous OpenBSD backend",
+ 0,
+ NULL, /* init() */
+ NULL, /* exit() */
+ obsd_get_device_list,
+ NULL, /* hotplug_poll */
+ obsd_open,
+ obsd_close,
+
+ obsd_get_device_descriptor,
+ obsd_get_active_config_descriptor,
+ obsd_get_config_descriptor,
+ NULL, /* get_config_descriptor_by_value() */
+
+ obsd_get_configuration,
+ obsd_set_configuration,
+
+ obsd_claim_interface,
+ obsd_release_interface,
+
+ obsd_set_interface_altsetting,
+ obsd_clear_halt,
+ obsd_reset_device,
+
+ NULL, /* alloc_streams */
+ NULL, /* free_streams */
+
+ NULL, /* kernel_driver_active() */
+ NULL, /* detach_kernel_driver() */
+ NULL, /* attach_kernel_driver() */
+
+ obsd_destroy_device,
+
+ obsd_submit_transfer,
+ obsd_cancel_transfer,
+ obsd_clear_transfer_priv,
+
+ NULL, /* handle_events() */
+ obsd_handle_transfer_completion,
+
+ obsd_clock_gettime,
+ sizeof(struct device_priv),
+ sizeof(struct handle_priv),
+ 0, /* transfer_priv_size */
+};
+
+#define DEVPATH "/dev/"
+#define USBDEV DEVPATH "usb"
+
+int
+obsd_get_device_list(struct libusb_context * ctx,
+ struct discovered_devs **discdevs)
+{
+ struct discovered_devs *ddd;
+ struct libusb_device *dev;
+ struct device_priv *dpriv;
+ struct usb_device_info di;
+ struct usb_device_ddesc dd;
+ unsigned long session_id;
+ char devices[USB_MAX_DEVICES];
+ char busnode[16];
+ char *udevname;
+ int fd, addr, i, j;
+
+ usbi_dbg("");
+
+ for (i = 0; i < 8; i++) {
+ snprintf(busnode, sizeof(busnode), USBDEV "%d", i);
+
+ if ((fd = open(busnode, O_RDWR)) < 0) {
+ if (errno != ENOENT && errno != ENXIO)
+ usbi_err(ctx, "could not open %s", busnode);
+ continue;
+ }
+
+ bzero(devices, sizeof(devices));
+ for (addr = 1; addr < USB_MAX_DEVICES; addr++) {
+ if (devices[addr])
+ continue;
+
+ di.udi_addr = addr;
+ if (ioctl(fd, USB_DEVICEINFO, &di) < 0)
+ continue;
+
+ /*
+ * XXX If ugen(4) is attached to the USB device
+ * it will be used.
+ */
+ udevname = NULL;
+ for (j = 0; j < USB_MAX_DEVNAMES; j++)
+ if (!strncmp("ugen", di.udi_devnames[j], 4)) {
+ udevname = strdup(di.udi_devnames[j]);
+ break;
+ }
+
+ session_id = (di.udi_bus << 8 | di.udi_addr);
+ dev = usbi_get_device_by_session_id(ctx, session_id);
+
+ if (dev == NULL) {
+ dev = usbi_alloc_device(ctx, session_id);
+ if (dev == NULL) {
+ close(fd);
+ return (LIBUSB_ERROR_NO_MEM);
+ }
+
+ dev->bus_number = di.udi_bus;
+ dev->device_address = di.udi_addr;
+ dev->speed = di.udi_speed;
+
+ dpriv = (struct device_priv *)dev->os_priv;
+ dpriv->fd = -1;
+ dpriv->cdesc = NULL;
+ dpriv->devname = udevname;
+
+ dd.udd_bus = di.udi_bus;
+ dd.udd_addr = di.udi_addr;
+ if (ioctl(fd, USB_DEVICE_GET_DDESC, &dd) < 0) {
+ libusb_unref_device(dev);
+ continue;
+ }
+ dpriv->ddesc = dd.udd_desc;
+
+ if (_cache_active_config_descriptor(dev)) {
+ libusb_unref_device(dev);
+ continue;
+ }
+
+ if (usbi_sanitize_device(dev)) {
+ libusb_unref_device(dev);
+ continue;
+ }
+ }
+
+ ddd = discovered_devs_append(*discdevs, dev);
+ if (ddd == NULL) {
+ close(fd);
+ return (LIBUSB_ERROR_NO_MEM);
+ }
+ libusb_unref_device(dev);
+
+ *discdevs = ddd;
+ devices[addr] = 1;
+ }
+
+ close(fd);
+ }
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_open(struct libusb_device_handle *handle)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+ char devnode[16];
+
+ if (dpriv->devname) {
+ /*
+ * Only open ugen(4) attached devices read-write, all
+ * read-only operations are done through the bus node.
+ */
+ snprintf(devnode, sizeof(devnode), DEVPATH "%s.00",
+ dpriv->devname);
+ dpriv->fd = open(devnode, O_RDWR);
+ if (dpriv->fd < 0)
+ return _errno_to_libusb(errno);
+
+ usbi_dbg("open %s: fd %d", devnode, dpriv->fd);
+ }
+
+ return (LIBUSB_SUCCESS);
+}
+
+void
+obsd_close(struct libusb_device_handle *handle)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ if (dpriv->devname) {
+ usbi_dbg("close: fd %d", dpriv->fd);
+
+ close(dpriv->fd);
+ dpriv->fd = -1;
+ }
+}
+
+int
+obsd_get_device_descriptor(struct libusb_device *dev, unsigned char *buf,
+ int *host_endian)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+
+ usbi_dbg("");
+
+ memcpy(buf, &dpriv->ddesc, DEVICE_DESC_LENGTH);
+
+ *host_endian = 0;
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_get_active_config_descriptor(struct libusb_device *dev,
+ unsigned char *buf, size_t len, int *host_endian)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+ usb_config_descriptor_t *ucd = (usb_config_descriptor_t *)dpriv->cdesc;
+
+ len = MIN(len, UGETW(ucd->wTotalLength));
+
+ usbi_dbg("len %d", len);
+
+ memcpy(buf, dpriv->cdesc, len);
+
+ *host_endian = 0;
+
+ return (len);
+}
+
+int
+obsd_get_config_descriptor(struct libusb_device *dev, uint8_t idx,
+ unsigned char *buf, size_t len, int *host_endian)
+{
+ struct usb_device_fdesc udf;
+ int fd, err;
+
+ if ((fd = _bus_open(dev->bus_number)) < 0)
+ return _errno_to_libusb(errno);
+
+ udf.udf_bus = dev->bus_number;
+ udf.udf_addr = dev->device_address;
+ udf.udf_config_index = idx;
+ udf.udf_size = len;
+ udf.udf_data = buf;
+
+ usbi_dbg("index %d, len %d", udf.udf_config_index, len);
+
+ if (ioctl(fd, USB_DEVICE_GET_FDESC, &udf) < 0) {
+ err = errno;
+ close(fd);
+ return _errno_to_libusb(err);
+ }
+ close(fd);
+
+ *host_endian = 0;
+
+ return (len);
+}
+
+int
+obsd_get_configuration(struct libusb_device_handle *handle, int *config)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+ usb_config_descriptor_t *ucd = (usb_config_descriptor_t *)dpriv->cdesc;
+
+ *config = ucd->bConfigurationValue;
+
+ usbi_dbg("bConfigurationValue %d", *config);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_set_configuration(struct libusb_device_handle *handle, int config)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+
+ if (dpriv->devname == NULL)
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+
+ usbi_dbg("bConfigurationValue %d", config);
+
+ if (ioctl(dpriv->fd, USB_SET_CONFIG, &config) < 0)
+ return _errno_to_libusb(errno);
+
+ return _cache_active_config_descriptor(handle->dev);
+}
+
+int
+obsd_claim_interface(struct libusb_device_handle *handle, int iface)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ hpriv->endpoints[i] = -1;
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_release_interface(struct libusb_device_handle *handle, int iface)
+{
+ struct handle_priv *hpriv = (struct handle_priv *)handle->os_priv;
+ int i;
+
+ for (i = 0; i < USB_MAX_ENDPOINTS; i++)
+ if (hpriv->endpoints[i] >= 0)
+ close(hpriv->endpoints[i]);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_set_interface_altsetting(struct libusb_device_handle *handle, int iface,
+ int altsetting)
+{
+ struct device_priv *dpriv = (struct device_priv *)handle->dev->os_priv;
+ struct usb_alt_interface intf;
+
+ if (dpriv->devname == NULL)
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+
+ usbi_dbg("iface %d, setting %d", iface, altsetting);
+
+ memset(&intf, 0, sizeof(intf));
+
+ intf.uai_interface_index = iface;
+ intf.uai_alt_no = altsetting;
+
+ if (ioctl(dpriv->fd, USB_SET_ALTINTERFACE, &intf) < 0)
+ return _errno_to_libusb(errno);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_clear_halt(struct libusb_device_handle *handle, unsigned char endpoint)
+{
+ struct usb_ctl_request req;
+ int fd, err;
+
+ if ((fd = _bus_open(handle->dev->bus_number)) < 0)
+ return _errno_to_libusb(errno);
+
+ usbi_dbg("");
+
+ req.ucr_addr = handle->dev->device_address;
+ req.ucr_request.bmRequestType = UT_WRITE_ENDPOINT;
+ req.ucr_request.bRequest = UR_CLEAR_FEATURE;
+ USETW(req.ucr_request.wValue, UF_ENDPOINT_HALT);
+ USETW(req.ucr_request.wIndex, endpoint);
+ USETW(req.ucr_request.wLength, 0);
+
+ if (ioctl(fd, USB_REQUEST, &req) < 0) {
+ err = errno;
+ close(fd);
+ return _errno_to_libusb(err);
+ }
+ close(fd);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_reset_device(struct libusb_device_handle *handle)
+{
+ usbi_dbg("");
+
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+}
+
+void
+obsd_destroy_device(struct libusb_device *dev)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+
+ usbi_dbg("");
+
+ free(dpriv->cdesc);
+ free(dpriv->devname);
+}
+
+int
+obsd_submit_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ struct handle_priv *hpriv;
+ int err = 0;
+
+ usbi_dbg("");
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ hpriv = (struct handle_priv *)transfer->dev_handle->os_priv;
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ err = _sync_control_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ if (IS_XFEROUT(transfer)) {
+ /* Isochronous write is not supported */
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+ err = _sync_gen_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ if (IS_XFEROUT(transfer) &&
+ transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET) {
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+ err = _sync_gen_transfer(itransfer);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ err = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+
+ if (err)
+ return (err);
+
+ usbi_signal_transfer_completion(itransfer);
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+obsd_cancel_transfer(struct usbi_transfer *itransfer)
+{
+ usbi_dbg("");
+
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+}
+
+void
+obsd_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+ usbi_dbg("");
+
+ /* Nothing to do */
+}
+
+int
+obsd_handle_transfer_completion(struct usbi_transfer *itransfer)
+{
+ return usbi_handle_transfer_completion(itransfer, LIBUSB_TRANSFER_COMPLETED);
+}
+
+int
+obsd_clock_gettime(int clkid, struct timespec *tp)
+{
+ usbi_dbg("clock %d", clkid);
+
+ if (clkid == USBI_CLOCK_REALTIME)
+ return clock_gettime(CLOCK_REALTIME, tp);
+
+ if (clkid == USBI_CLOCK_MONOTONIC)
+ return clock_gettime(CLOCK_MONOTONIC, tp);
+
+ return (LIBUSB_ERROR_INVALID_PARAM);
+}
+
+int
+_errno_to_libusb(int err)
+{
+ usbi_dbg("error: %s (%d)", strerror(err), err);
+
+ switch (err) {
+ case EIO:
+ return (LIBUSB_ERROR_IO);
+ case EACCES:
+ return (LIBUSB_ERROR_ACCESS);
+ case ENOENT:
+ return (LIBUSB_ERROR_NO_DEVICE);
+ case ENOMEM:
+ return (LIBUSB_ERROR_NO_MEM);
+ case ETIMEDOUT:
+ return (LIBUSB_ERROR_TIMEOUT);
+ }
+
+ return (LIBUSB_ERROR_OTHER);
+}
+
+int
+_cache_active_config_descriptor(struct libusb_device *dev)
+{
+ struct device_priv *dpriv = (struct device_priv *)dev->os_priv;
+ struct usb_device_cdesc udc;
+ struct usb_device_fdesc udf;
+ unsigned char* buf;
+ int fd, len, err;
+
+ if ((fd = _bus_open(dev->bus_number)) < 0)
+ return _errno_to_libusb(errno);
+
+ usbi_dbg("fd %d, addr %d", fd, dev->device_address);
+
+ udc.udc_bus = dev->bus_number;
+ udc.udc_addr = dev->device_address;
+ udc.udc_config_index = USB_CURRENT_CONFIG_INDEX;
+ if (ioctl(fd, USB_DEVICE_GET_CDESC, &udc) < 0) {
+ err = errno;
+ close(fd);
+ return _errno_to_libusb(errno);
+ }
+
+ usbi_dbg("active bLength %d", udc.udc_desc.bLength);
+
+ len = UGETW(udc.udc_desc.wTotalLength);
+ buf = malloc(len);
+ if (buf == NULL)
+ return (LIBUSB_ERROR_NO_MEM);
+
+ udf.udf_bus = dev->bus_number;
+ udf.udf_addr = dev->device_address;
+ udf.udf_config_index = udc.udc_config_index;
+ udf.udf_size = len;
+ udf.udf_data = buf;
+
+ usbi_dbg("index %d, len %d", udf.udf_config_index, len);
+
+ if (ioctl(fd, USB_DEVICE_GET_FDESC, &udf) < 0) {
+ err = errno;
+ close(fd);
+ free(buf);
+ return _errno_to_libusb(err);
+ }
+ close(fd);
+
+ if (dpriv->cdesc)
+ free(dpriv->cdesc);
+ dpriv->cdesc = buf;
+
+ return (LIBUSB_SUCCESS);
+}
+
+int
+_sync_control_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ struct libusb_control_setup *setup;
+ struct device_priv *dpriv;
+ struct usb_ctl_request req;
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ dpriv = (struct device_priv *)transfer->dev_handle->dev->os_priv;
+ setup = (struct libusb_control_setup *)transfer->buffer;
+
+ usbi_dbg("type %x request %x value %x index %d length %d timeout %d",
+ setup->bmRequestType, setup->bRequest,
+ libusb_le16_to_cpu(setup->wValue),
+ libusb_le16_to_cpu(setup->wIndex),
+ libusb_le16_to_cpu(setup->wLength), transfer->timeout);
+
+ req.ucr_addr = transfer->dev_handle->dev->device_address;
+ req.ucr_request.bmRequestType = setup->bmRequestType;
+ req.ucr_request.bRequest = setup->bRequest;
+ /* Don't use USETW, libusb already deals with the endianness */
+ (*(uint16_t *)req.ucr_request.wValue) = setup->wValue;
+ (*(uint16_t *)req.ucr_request.wIndex) = setup->wIndex;
+ (*(uint16_t *)req.ucr_request.wLength) = setup->wLength;
+ req.ucr_data = transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
+
+ if ((transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) == 0)
+ req.ucr_flags = USBD_SHORT_XFER_OK;
+
+ if (dpriv->devname == NULL) {
+ /*
+ * XXX If the device is not attached to ugen(4) it is
+ * XXX still possible to submit a control transfer but
+ * XXX with the default timeout only.
+ */
+ int fd, err;
+
+ if ((fd = _bus_open(transfer->dev_handle->dev->bus_number)) < 0)
+ return _errno_to_libusb(errno);
+
+ if ((ioctl(fd, USB_REQUEST, &req)) < 0) {
+ err = errno;
+ close(fd);
+ return _errno_to_libusb(err);
+ }
+ close(fd);
+ } else {
+ if ((ioctl(dpriv->fd, USB_SET_TIMEOUT, &transfer->timeout)) < 0)
+ return _errno_to_libusb(errno);
+
+ if ((ioctl(dpriv->fd, USB_DO_REQUEST, &req)) < 0)
+ return _errno_to_libusb(errno);
+ }
+
+ itransfer->transferred = req.ucr_actlen;
+
+ usbi_dbg("transferred %d", itransfer->transferred);
+
+ return (0);
+}
+
+int
+_access_endpoint(struct libusb_transfer *transfer)
+{
+ struct handle_priv *hpriv;
+ struct device_priv *dpriv;
+ char devnode[16];
+ int fd, endpt;
+ mode_t mode;
+
+ hpriv = (struct handle_priv *)transfer->dev_handle->os_priv;
+ dpriv = (struct device_priv *)transfer->dev_handle->dev->os_priv;
+
+ endpt = UE_GET_ADDR(transfer->endpoint);
+ mode = IS_XFERIN(transfer) ? O_RDONLY : O_WRONLY;
+
+ usbi_dbg("endpoint %d mode %d", endpt, mode);
+
+ if (hpriv->endpoints[endpt] < 0) {
+ /* Pick the right endpoint node */
+ snprintf(devnode, sizeof(devnode), DEVPATH "%s.%02d",
+ dpriv->devname, endpt);
+
+ /* We may need to read/write to the same endpoint later. */
+ if (((fd = open(devnode, O_RDWR)) < 0) && (errno == ENXIO))
+ if ((fd = open(devnode, mode)) < 0)
+ return (-1);
+
+ hpriv->endpoints[endpt] = fd;
+ }
+
+ return (hpriv->endpoints[endpt]);
+}
+
+int
+_sync_gen_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer;
+ struct device_priv *dpriv;
+ int fd, nr = 1;
+
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ dpriv = (struct device_priv *)transfer->dev_handle->dev->os_priv;
+
+ if (dpriv->devname == NULL)
+ return (LIBUSB_ERROR_NOT_SUPPORTED);
+
+ /*
+ * Bulk, Interrupt or Isochronous transfer depends on the
+ * endpoint and thus the node to open.
+ */
+ if ((fd = _access_endpoint(transfer)) < 0)
+ return _errno_to_libusb(errno);
+
+ if ((ioctl(fd, USB_SET_TIMEOUT, &transfer->timeout)) < 0)
+ return _errno_to_libusb(errno);
+
+ if (IS_XFERIN(transfer)) {
+ if ((transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) == 0)
+ if ((ioctl(fd, USB_SET_SHORT_XFER, &nr)) < 0)
+ return _errno_to_libusb(errno);
+
+ nr = read(fd, transfer->buffer, transfer->length);
+ } else {
+ nr = write(fd, transfer->buffer, transfer->length);
+ }
+
+ if (nr < 0)
+ return _errno_to_libusb(errno);
+
+ itransfer->transferred = nr;
+
+ return (0);
+}
+
+int
+_bus_open(int number)
+{
+ char busnode[16];
+
+ snprintf(busnode, sizeof(busnode), USBDEV "%d", number);
+
+ return open(busnode, O_RDWR);
+}
--- /dev/null
+/*
+ * poll_posix: poll compatibility wrapper for POSIX systems
+ * Copyright © 2013 RealVNC Ltd.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <config.h>
+
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdlib.h>
+
+#include "libusbi.h"
+
+int usbi_pipe(int pipefd[2])
+{
+ int ret = pipe(pipefd);
+ if (ret != 0) {
+ return ret;
+ }
+ ret = fcntl(pipefd[1], F_GETFL);
+ if (ret == -1) {
+ usbi_dbg("Failed to get pipe fd flags: %d", errno);
+ goto err_close_pipe;
+ }
+ ret = fcntl(pipefd[1], F_SETFL, ret | O_NONBLOCK);
+ if (ret != 0) {
+ usbi_dbg("Failed to set non-blocking on new pipe: %d", errno);
+ goto err_close_pipe;
+ }
+
+ return 0;
+
+err_close_pipe:
+ usbi_close(pipefd[0]);
+ usbi_close(pipefd[1]);
+ return ret;
+}
--- /dev/null
+#ifndef LIBUSB_POLL_POSIX_H
+#define LIBUSB_POLL_POSIX_H
+
+#define usbi_write write
+#define usbi_read read
+#define usbi_close close
+#define usbi_poll poll
+
+int usbi_pipe(int pipefd[2]);
+
+#endif /* LIBUSB_POLL_POSIX_H */
--- /dev/null
+/*
+ * poll_windows: poll compatibility wrapper for Windows
+ * Copyright © 2012-2013 RealVNC Ltd.
+ * Copyright © 2009-2010 Pete Batard <pete@akeo.ie>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of poll implementation from libusb-win32, by Stephan Meyer et al.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/*
+ * poll() and pipe() Windows compatibility layer for libusb 1.0
+ *
+ * The way this layer works is by using OVERLAPPED with async I/O transfers, as
+ * OVERLAPPED have an associated event which is flagged for I/O completion.
+ *
+ * For USB pollable async I/O, you would typically:
+ * - obtain a Windows HANDLE to a file or device that has been opened in
+ * OVERLAPPED mode
+ * - call usbi_create_fd with this handle to obtain a custom fd.
+ * Note that if you need simultaneous R/W access, you need to call create_fd
+ * twice, once in RW_READ and once in RW_WRITE mode to obtain 2 separate
+ * pollable fds
+ * - leave the core functions call the poll routine and flag POLLIN/POLLOUT
+ *
+ * The pipe pollable synchronous I/O works using the overlapped event associated
+ * with a fake pipe. The read/write functions are only meant to be used in that
+ * context.
+ */
+#include <config.h>
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "libusbi.h"
+
+// Uncomment to debug the polling layer
+//#define DEBUG_POLL_WINDOWS
+#if defined(DEBUG_POLL_WINDOWS)
+#define poll_dbg usbi_dbg
+#else
+// MSVC++ < 2005 cannot use a variadic argument and non MSVC
+// compilers produce warnings if parenthesis are ommitted.
+#if defined(_MSC_VER) && (_MSC_VER < 1400)
+#define poll_dbg
+#else
+#define poll_dbg(...)
+#endif
+#endif
+
+#if defined(_PREFAST_)
+#pragma warning(disable:28719)
+#endif
+
+#define CHECK_INIT_POLLING do {if(!is_polling_set) init_polling();} while(0)
+
+// public fd data
+const struct winfd INVALID_WINFD = {-1, INVALID_HANDLE_VALUE, NULL, NULL, NULL, RW_NONE};
+struct winfd poll_fd[MAX_FDS];
+// internal fd data
+struct {
+ CRITICAL_SECTION mutex; // lock for fds
+ // Additional variables for XP CancelIoEx partial emulation
+ HANDLE original_handle;
+ DWORD thread_id;
+} _poll_fd[MAX_FDS];
+
+// globals
+BOOLEAN is_polling_set = FALSE;
+LONG pipe_number = 0;
+static volatile LONG compat_spinlock = 0;
+
+#if !defined(_WIN32_WCE)
+// CancelIoEx, available on Vista and later only, provides the ability to cancel
+// a single transfer (OVERLAPPED) when used. As it may not be part of any of the
+// platform headers, we hook into the Kernel32 system DLL directly to seek it.
+static BOOL (__stdcall *pCancelIoEx)(HANDLE, LPOVERLAPPED) = NULL;
+#define Use_Duplicate_Handles (pCancelIoEx == NULL)
+
+static inline void setup_cancel_io(void)
+{
+ HMODULE hKernel32 = GetModuleHandleA("KERNEL32");
+ if (hKernel32 != NULL) {
+ pCancelIoEx = (BOOL (__stdcall *)(HANDLE,LPOVERLAPPED))
+ GetProcAddress(hKernel32, "CancelIoEx");
+ }
+ usbi_dbg("Will use CancelIo%s for I/O cancellation",
+ Use_Duplicate_Handles?"":"Ex");
+}
+
+static inline BOOL cancel_io(int _index)
+{
+ if ((_index < 0) || (_index >= MAX_FDS)) {
+ return FALSE;
+ }
+
+ if ( (poll_fd[_index].fd < 0) || (poll_fd[_index].handle == INVALID_HANDLE_VALUE)
+ || (poll_fd[_index].handle == 0) || (poll_fd[_index].overlapped == NULL) ) {
+ return TRUE;
+ }
+ if (poll_fd[_index].itransfer && poll_fd[_index].cancel_fn) {
+ // Cancel outstanding transfer via the specific callback
+ (*poll_fd[_index].cancel_fn)(poll_fd[_index].itransfer);
+ return TRUE;
+ }
+ if (pCancelIoEx != NULL) {
+ return (*pCancelIoEx)(poll_fd[_index].handle, poll_fd[_index].overlapped);
+ }
+ if (_poll_fd[_index].thread_id == GetCurrentThreadId()) {
+ return CancelIo(poll_fd[_index].handle);
+ }
+ usbi_warn(NULL, "Unable to cancel I/O that was started from another thread");
+ return FALSE;
+}
+#else
+#define Use_Duplicate_Handles FALSE
+
+static __inline void setup_cancel_io()
+{
+ // No setup needed on WinCE
+}
+
+static __inline BOOL cancel_io(int _index)
+{
+ if ((_index < 0) || (_index >= MAX_FDS)) {
+ return FALSE;
+ }
+ if ( (poll_fd[_index].fd < 0) || (poll_fd[_index].handle == INVALID_HANDLE_VALUE)
+ || (poll_fd[_index].handle == 0) || (poll_fd[_index].overlapped == NULL) ) {
+ return TRUE;
+ }
+ if (poll_fd[_index].itransfer && poll_fd[_index].cancel_fn) {
+ // Cancel outstanding transfer via the specific callback
+ (*poll_fd[_index].cancel_fn)(poll_fd[_index].itransfer);
+ }
+ return TRUE;
+}
+#endif
+
+// Init
+void init_polling(void)
+{
+ int i;
+
+ while (InterlockedExchange((LONG *)&compat_spinlock, 1) == 1) {
+ SleepEx(0, TRUE);
+ }
+ if (!is_polling_set) {
+ setup_cancel_io();
+ for (i=0; i<MAX_FDS; i++) {
+ poll_fd[i] = INVALID_WINFD;
+ _poll_fd[i].original_handle = INVALID_HANDLE_VALUE;
+ _poll_fd[i].thread_id = 0;
+ InitializeCriticalSection(&_poll_fd[i].mutex);
+ }
+ is_polling_set = TRUE;
+ }
+ InterlockedExchange((LONG *)&compat_spinlock, 0);
+}
+
+// Internal function to retrieve the table index (and lock the fd mutex)
+static int _fd_to_index_and_lock(int fd)
+{
+ int i;
+
+ if (fd < 0)
+ return -1;
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].fd == fd) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have changed before we got to critical
+ if (poll_fd[i].fd != fd) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+ return i;
+ }
+ }
+ return -1;
+}
+
+static OVERLAPPED *create_overlapped(void)
+{
+ OVERLAPPED *overlapped = (OVERLAPPED*) calloc(1, sizeof(OVERLAPPED));
+ if (overlapped == NULL) {
+ return NULL;
+ }
+ overlapped->hEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
+ if(overlapped->hEvent == NULL) {
+ free (overlapped);
+ return NULL;
+ }
+ return overlapped;
+}
+
+static void free_overlapped(OVERLAPPED *overlapped)
+{
+ if (overlapped == NULL)
+ return;
+
+ if ( (overlapped->hEvent != 0)
+ && (overlapped->hEvent != INVALID_HANDLE_VALUE) ) {
+ CloseHandle(overlapped->hEvent);
+ }
+ free(overlapped);
+}
+
+void exit_polling(void)
+{
+ int i;
+
+ while (InterlockedExchange((LONG *)&compat_spinlock, 1) == 1) {
+ SleepEx(0, TRUE);
+ }
+ if (is_polling_set) {
+ is_polling_set = FALSE;
+
+ for (i=0; i<MAX_FDS; i++) {
+ // Cancel any async I/O (handle can be invalid)
+ cancel_io(i);
+ // If anything was pending on that I/O, it should be
+ // terminating, and we should be able to access the fd
+ // mutex lock before too long
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ free_overlapped(poll_fd[i].overlapped);
+ if (Use_Duplicate_Handles) {
+ // Close duplicate handle
+ if (_poll_fd[i].original_handle != INVALID_HANDLE_VALUE) {
+ CloseHandle(poll_fd[i].handle);
+ }
+ }
+ poll_fd[i] = INVALID_WINFD;
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ DeleteCriticalSection(&_poll_fd[i].mutex);
+ }
+ }
+ InterlockedExchange((LONG *)&compat_spinlock, 0);
+}
+
+/*
+ * Create a fake pipe.
+ * As libusb only uses pipes for signaling, all we need from a pipe is an
+ * event. To that extent, we create a single wfd and overlapped as a means
+ * to access that event.
+ */
+int usbi_pipe(int filedes[2])
+{
+ int i;
+ OVERLAPPED* overlapped;
+
+ CHECK_INIT_POLLING;
+
+ overlapped = create_overlapped();
+
+ if (overlapped == NULL) {
+ return -1;
+ }
+ // The overlapped must have status pending for signaling to work in poll
+ overlapped->Internal = STATUS_PENDING;
+ overlapped->InternalHigh = 0;
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].fd < 0) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have been allocated before we got to critical
+ if (poll_fd[i].fd >= 0) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+
+ // Use index as the unique fd number
+ poll_fd[i].fd = i;
+ // Read end of the "pipe"
+ filedes[0] = poll_fd[i].fd;
+ // We can use the same handle for both ends
+ filedes[1] = filedes[0];
+
+ poll_fd[i].handle = DUMMY_HANDLE;
+ poll_fd[i].overlapped = overlapped;
+ // There's no polling on the write end, so we just use READ for our needs
+ poll_fd[i].rw = RW_READ;
+ _poll_fd[i].original_handle = INVALID_HANDLE_VALUE;
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ return 0;
+ }
+ }
+ free_overlapped(overlapped);
+ return -1;
+}
+
+/*
+ * Create both an fd and an OVERLAPPED from an open Windows handle, so that
+ * it can be used with our polling function
+ * The handle MUST support overlapped transfers (usually requires CreateFile
+ * with FILE_FLAG_OVERLAPPED)
+ * Return a pollable file descriptor struct, or INVALID_WINFD on error
+ *
+ * Note that the fd returned by this function is a per-transfer fd, rather
+ * than a per-session fd and cannot be used for anything else but our
+ * custom functions (the fd itself points to the NUL: device)
+ * if you plan to do R/W on the same handle, you MUST create 2 fds: one for
+ * read and one for write. Using a single R/W fd is unsupported and will
+ * produce unexpected results
+ */
+struct winfd usbi_create_fd(HANDLE handle, int access_mode, struct usbi_transfer *itransfer, cancel_transfer *cancel_fn)
+{
+ int i;
+ struct winfd wfd = INVALID_WINFD;
+ OVERLAPPED* overlapped = NULL;
+
+ CHECK_INIT_POLLING;
+
+ if ((handle == 0) || (handle == INVALID_HANDLE_VALUE)) {
+ return INVALID_WINFD;
+ }
+
+ wfd.itransfer = itransfer;
+ wfd.cancel_fn = cancel_fn;
+
+ if ((access_mode != RW_READ) && (access_mode != RW_WRITE)) {
+ usbi_warn(NULL, "only one of RW_READ or RW_WRITE are supported. "
+ "If you want to poll for R/W simultaneously, create multiple fds from the same handle.");
+ return INVALID_WINFD;
+ }
+ if (access_mode == RW_READ) {
+ wfd.rw = RW_READ;
+ } else {
+ wfd.rw = RW_WRITE;
+ }
+
+ overlapped = create_overlapped();
+ if(overlapped == NULL) {
+ return INVALID_WINFD;
+ }
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].fd < 0) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have been removed before we got to critical
+ if (poll_fd[i].fd >= 0) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+ // Use index as the unique fd number
+ wfd.fd = i;
+ // Attempt to emulate some of the CancelIoEx behaviour on platforms
+ // that don't have it
+ if (Use_Duplicate_Handles) {
+ _poll_fd[i].thread_id = GetCurrentThreadId();
+ if (!DuplicateHandle(GetCurrentProcess(), handle, GetCurrentProcess(),
+ &wfd.handle, 0, TRUE, DUPLICATE_SAME_ACCESS)) {
+ usbi_dbg("could not duplicate handle for CancelIo - using original one");
+ wfd.handle = handle;
+ // Make sure we won't close the original handle on fd deletion then
+ _poll_fd[i].original_handle = INVALID_HANDLE_VALUE;
+ } else {
+ _poll_fd[i].original_handle = handle;
+ }
+ } else {
+ wfd.handle = handle;
+ }
+ wfd.overlapped = overlapped;
+ memcpy(&poll_fd[i], &wfd, sizeof(struct winfd));
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ return wfd;
+ }
+ }
+ free_overlapped(overlapped);
+ return INVALID_WINFD;
+}
+
+static void _free_index(int _index)
+{
+ // Cancel any async IO (Don't care about the validity of our handles for this)
+ cancel_io(_index);
+ // close the duplicate handle (if we have an actual duplicate)
+ if (Use_Duplicate_Handles) {
+ if (_poll_fd[_index].original_handle != INVALID_HANDLE_VALUE) {
+ CloseHandle(poll_fd[_index].handle);
+ }
+ _poll_fd[_index].original_handle = INVALID_HANDLE_VALUE;
+ _poll_fd[_index].thread_id = 0;
+ }
+ free_overlapped(poll_fd[_index].overlapped);
+ poll_fd[_index] = INVALID_WINFD;
+}
+
+/*
+ * Release a pollable file descriptor.
+ *
+ * Note that the associated Windows handle is not closed by this call
+ */
+void usbi_free_fd(struct winfd *wfd)
+{
+ int _index;
+
+ CHECK_INIT_POLLING;
+
+ _index = _fd_to_index_and_lock(wfd->fd);
+ if (_index < 0) {
+ return;
+ }
+ _free_index(_index);
+ *wfd = INVALID_WINFD;
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+}
+
+/*
+ * The functions below perform various conversions between fd, handle and OVERLAPPED
+ */
+struct winfd fd_to_winfd(int fd)
+{
+ int i;
+ struct winfd wfd;
+
+ CHECK_INIT_POLLING;
+
+ if (fd < 0)
+ return INVALID_WINFD;
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].fd == fd) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have been deleted before we got to critical
+ if (poll_fd[i].fd != fd) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+ memcpy(&wfd, &poll_fd[i], sizeof(struct winfd));
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ return wfd;
+ }
+ }
+ return INVALID_WINFD;
+}
+
+struct winfd handle_to_winfd(HANDLE handle)
+{
+ int i;
+ struct winfd wfd;
+
+ CHECK_INIT_POLLING;
+
+ if ((handle == 0) || (handle == INVALID_HANDLE_VALUE))
+ return INVALID_WINFD;
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].handle == handle) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have been deleted before we got to critical
+ if (poll_fd[i].handle != handle) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+ memcpy(&wfd, &poll_fd[i], sizeof(struct winfd));
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ return wfd;
+ }
+ }
+ return INVALID_WINFD;
+}
+
+struct winfd overlapped_to_winfd(OVERLAPPED* overlapped)
+{
+ int i;
+ struct winfd wfd;
+
+ CHECK_INIT_POLLING;
+
+ if (overlapped == NULL)
+ return INVALID_WINFD;
+
+ for (i=0; i<MAX_FDS; i++) {
+ if (poll_fd[i].overlapped == overlapped) {
+ EnterCriticalSection(&_poll_fd[i].mutex);
+ // fd might have been deleted before we got to critical
+ if (poll_fd[i].overlapped != overlapped) {
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ continue;
+ }
+ memcpy(&wfd, &poll_fd[i], sizeof(struct winfd));
+ LeaveCriticalSection(&_poll_fd[i].mutex);
+ return wfd;
+ }
+ }
+ return INVALID_WINFD;
+}
+
+/*
+ * POSIX poll equivalent, using Windows OVERLAPPED
+ * Currently, this function only accepts one of POLLIN or POLLOUT per fd
+ * (but you can create multiple fds from the same handle for read and write)
+ */
+int usbi_poll(struct pollfd *fds, unsigned int nfds, int timeout)
+{
+ unsigned i;
+ int _index, object_index, triggered;
+ HANDLE *handles_to_wait_on;
+ int *handle_to_index;
+ DWORD nb_handles_to_wait_on = 0;
+ DWORD ret;
+
+ CHECK_INIT_POLLING;
+
+ triggered = 0;
+ handles_to_wait_on = (HANDLE*) calloc(nfds+1, sizeof(HANDLE)); // +1 for fd_update
+ handle_to_index = (int*) calloc(nfds, sizeof(int));
+ if ((handles_to_wait_on == NULL) || (handle_to_index == NULL)) {
+ errno = ENOMEM;
+ triggered = -1;
+ goto poll_exit;
+ }
+
+ for (i = 0; i < nfds; ++i) {
+ fds[i].revents = 0;
+
+ // Only one of POLLIN or POLLOUT can be selected with this version of poll (not both)
+ if ((fds[i].events & ~POLLIN) && (!(fds[i].events & POLLOUT))) {
+ fds[i].revents |= POLLERR;
+ errno = EACCES;
+ usbi_warn(NULL, "unsupported set of events");
+ triggered = -1;
+ goto poll_exit;
+ }
+
+ _index = _fd_to_index_and_lock(fds[i].fd);
+ poll_dbg("fd[%d]=%d: (overlapped=%p) got events %04X", i, poll_fd[_index].fd, poll_fd[_index].overlapped, fds[i].events);
+
+ if ( (_index < 0) || (poll_fd[_index].handle == INVALID_HANDLE_VALUE)
+ || (poll_fd[_index].handle == 0) || (poll_fd[_index].overlapped == NULL)) {
+ fds[i].revents |= POLLNVAL | POLLERR;
+ errno = EBADF;
+ if (_index >= 0) {
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ }
+ usbi_warn(NULL, "invalid fd");
+ triggered = -1;
+ goto poll_exit;
+ }
+
+ // IN or OUT must match our fd direction
+ if ((fds[i].events & POLLIN) && (poll_fd[_index].rw != RW_READ)) {
+ fds[i].revents |= POLLNVAL | POLLERR;
+ errno = EBADF;
+ usbi_warn(NULL, "attempted POLLIN on fd without READ access");
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ triggered = -1;
+ goto poll_exit;
+ }
+
+ if ((fds[i].events & POLLOUT) && (poll_fd[_index].rw != RW_WRITE)) {
+ fds[i].revents |= POLLNVAL | POLLERR;
+ errno = EBADF;
+ usbi_warn(NULL, "attempted POLLOUT on fd without WRITE access");
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ triggered = -1;
+ goto poll_exit;
+ }
+
+ // The following macro only works if overlapped I/O was reported pending
+ if ( (HasOverlappedIoCompleted(poll_fd[_index].overlapped))
+ || (HasOverlappedIoCompletedSync(poll_fd[_index].overlapped)) ) {
+ poll_dbg(" completed");
+ // checks above should ensure this works:
+ fds[i].revents = fds[i].events;
+ triggered++;
+ } else {
+ handles_to_wait_on[nb_handles_to_wait_on] = poll_fd[_index].overlapped->hEvent;
+ handle_to_index[nb_handles_to_wait_on] = i;
+ nb_handles_to_wait_on++;
+ }
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ }
+
+ // If nothing was triggered, wait on all fds that require it
+ if ((timeout != 0) && (triggered == 0) && (nb_handles_to_wait_on != 0)) {
+ if (timeout < 0) {
+ poll_dbg("starting infinite wait for %d handles...", (int)nb_handles_to_wait_on);
+ } else {
+ poll_dbg("starting %d ms wait for %d handles...", timeout, (int)nb_handles_to_wait_on);
+ }
+ ret = WaitForMultipleObjects(nb_handles_to_wait_on, handles_to_wait_on,
+ FALSE, (timeout<0)?INFINITE:(DWORD)timeout);
+ object_index = ret-WAIT_OBJECT_0;
+ if ((object_index >= 0) && ((DWORD)object_index < nb_handles_to_wait_on)) {
+ poll_dbg(" completed after wait");
+ i = handle_to_index[object_index];
+ _index = _fd_to_index_and_lock(fds[i].fd);
+ fds[i].revents = fds[i].events;
+ triggered++;
+ if (_index >= 0) {
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ }
+ } else if (ret == WAIT_TIMEOUT) {
+ poll_dbg(" timed out");
+ triggered = 0; // 0 = timeout
+ } else {
+ errno = EIO;
+ triggered = -1; // error
+ }
+ }
+
+poll_exit:
+ if (handles_to_wait_on != NULL) {
+ free(handles_to_wait_on);
+ }
+ if (handle_to_index != NULL) {
+ free(handle_to_index);
+ }
+ return triggered;
+}
+
+/*
+ * close a fake pipe fd
+ */
+int usbi_close(int fd)
+{
+ int _index;
+ int r = -1;
+
+ CHECK_INIT_POLLING;
+
+ _index = _fd_to_index_and_lock(fd);
+
+ if (_index < 0) {
+ errno = EBADF;
+ } else {
+ free_overlapped(poll_fd[_index].overlapped);
+ poll_fd[_index] = INVALID_WINFD;
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ }
+ return r;
+}
+
+/*
+ * synchronous write for fake "pipe" signaling
+ */
+ssize_t usbi_write(int fd, const void *buf, size_t count)
+{
+ int _index;
+ UNUSED(buf);
+
+ CHECK_INIT_POLLING;
+
+ if (count != sizeof(unsigned char)) {
+ usbi_err(NULL, "this function should only used for signaling");
+ return -1;
+ }
+
+ _index = _fd_to_index_and_lock(fd);
+
+ if ( (_index < 0) || (poll_fd[_index].overlapped == NULL) ) {
+ errno = EBADF;
+ if (_index >= 0) {
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ }
+ return -1;
+ }
+
+ poll_dbg("set pipe event (fd = %d, thread = %08X)", _index, GetCurrentThreadId());
+ SetEvent(poll_fd[_index].overlapped->hEvent);
+ poll_fd[_index].overlapped->Internal = STATUS_WAIT_0;
+ // If two threads write on the pipe at the same time, we need to
+ // process two separate reads => use the overlapped as a counter
+ poll_fd[_index].overlapped->InternalHigh++;
+
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ return sizeof(unsigned char);
+}
+
+/*
+ * synchronous read for fake "pipe" signaling
+ */
+ssize_t usbi_read(int fd, void *buf, size_t count)
+{
+ int _index;
+ ssize_t r = -1;
+ UNUSED(buf);
+
+ CHECK_INIT_POLLING;
+
+ if (count != sizeof(unsigned char)) {
+ usbi_err(NULL, "this function should only used for signaling");
+ return -1;
+ }
+
+ _index = _fd_to_index_and_lock(fd);
+
+ if (_index < 0) {
+ errno = EBADF;
+ return -1;
+ }
+
+ if (WaitForSingleObject(poll_fd[_index].overlapped->hEvent, INFINITE) != WAIT_OBJECT_0) {
+ usbi_warn(NULL, "waiting for event failed: %d", (int)GetLastError());
+ errno = EIO;
+ goto out;
+ }
+
+ poll_dbg("clr pipe event (fd = %d, thread = %08X)", _index, GetCurrentThreadId());
+ poll_fd[_index].overlapped->InternalHigh--;
+ // Don't reset unless we don't have any more events to process
+ if (poll_fd[_index].overlapped->InternalHigh <= 0) {
+ ResetEvent(poll_fd[_index].overlapped->hEvent);
+ poll_fd[_index].overlapped->Internal = STATUS_PENDING;
+ }
+
+ r = sizeof(unsigned char);
+
+out:
+ LeaveCriticalSection(&_poll_fd[_index].mutex);
+ return r;
+}
--- /dev/null
+/*
+ * Windows compat: POSIX compatibility wrapper
+ * Copyright © 2012-2013 RealVNC Ltd.
+ * Copyright © 2009-2010 Pete Batard <pete@akeo.ie>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of poll implementation from libusb-win32, by Stephan Meyer et al.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#pragma once
+
+#if defined(_MSC_VER)
+// disable /W4 MSVC warnings that are benign
+#pragma warning(disable:4127) // conditional expression is constant
+#endif
+
+// Handle synchronous completion through the overlapped structure
+#if !defined(STATUS_REPARSE) // reuse the REPARSE status code
+#define STATUS_REPARSE ((LONG)0x00000104L)
+#endif
+#define STATUS_COMPLETED_SYNCHRONOUSLY STATUS_REPARSE
+#if defined(_WIN32_WCE)
+// WinCE doesn't have a HasOverlappedIoCompleted() macro, so attempt to emulate it
+#define HasOverlappedIoCompleted(lpOverlapped) (((DWORD)(lpOverlapped)->Internal) != STATUS_PENDING)
+#endif
+#define HasOverlappedIoCompletedSync(lpOverlapped) (((DWORD)(lpOverlapped)->Internal) == STATUS_COMPLETED_SYNCHRONOUSLY)
+
+#define DUMMY_HANDLE ((HANDLE)(LONG_PTR)-2)
+
+/* Windows versions */
+enum windows_version {
+ WINDOWS_CE = -2,
+ WINDOWS_UNDEFINED = -1,
+ WINDOWS_UNSUPPORTED = 0,
+ WINDOWS_XP = 0x51,
+ WINDOWS_2003 = 0x52, // Also XP x64
+ WINDOWS_VISTA = 0x60,
+ WINDOWS_7 = 0x61,
+ WINDOWS_8 = 0x62,
+ WINDOWS_8_1_OR_LATER = 0x63,
+ WINDOWS_MAX
+};
+extern int windows_version;
+
+#define MAX_FDS 256
+
+#define POLLIN 0x0001 /* There is data to read */
+#define POLLPRI 0x0002 /* There is urgent data to read */
+#define POLLOUT 0x0004 /* Writing now will not block */
+#define POLLERR 0x0008 /* Error condition */
+#define POLLHUP 0x0010 /* Hung up */
+#define POLLNVAL 0x0020 /* Invalid request: fd not open */
+
+struct pollfd {
+ int fd; /* file descriptor */
+ short events; /* requested events */
+ short revents; /* returned events */
+};
+
+// access modes
+enum rw_type {
+ RW_NONE,
+ RW_READ,
+ RW_WRITE,
+};
+
+// fd struct that can be used for polling on Windows
+typedef int cancel_transfer(struct usbi_transfer *itransfer);
+
+struct winfd {
+ int fd; // what's exposed to libusb core
+ HANDLE handle; // what we need to attach overlapped to the I/O op, so we can poll it
+ OVERLAPPED* overlapped; // what will report our I/O status
+ struct usbi_transfer *itransfer; // Associated transfer, or NULL if completed
+ cancel_transfer *cancel_fn; // Function pointer to cancel transfer API
+ enum rw_type rw; // I/O transfer direction: read *XOR* write (NOT BOTH)
+};
+extern const struct winfd INVALID_WINFD;
+
+int usbi_pipe(int pipefd[2]);
+int usbi_poll(struct pollfd *fds, unsigned int nfds, int timeout);
+ssize_t usbi_write(int fd, const void *buf, size_t count);
+ssize_t usbi_read(int fd, void *buf, size_t count);
+int usbi_close(int fd);
+
+void init_polling(void);
+void exit_polling(void);
+struct winfd usbi_create_fd(HANDLE handle, int access_mode,
+ struct usbi_transfer *transfer, cancel_transfer *cancel_fn);
+void usbi_free_fd(struct winfd* winfd);
+struct winfd fd_to_winfd(int fd);
+struct winfd handle_to_winfd(HANDLE handle);
+struct winfd overlapped_to_winfd(OVERLAPPED* overlapped);
+
+/*
+ * Timeval operations
+ */
+#if defined(DDKBUILD)
+#include <winsock.h> // defines timeval functions on DDK
+#endif
+
+#if !defined(TIMESPEC_TO_TIMEVAL)
+#define TIMESPEC_TO_TIMEVAL(tv, ts) { \
+ (tv)->tv_sec = (long)(ts)->tv_sec; \
+ (tv)->tv_usec = (long)(ts)->tv_nsec / 1000; \
+}
+#endif
+#if !defined(timersub)
+#define timersub(a, b, result) \
+do { \
+ (result)->tv_sec = (a)->tv_sec - (b)->tv_sec; \
+ (result)->tv_usec = (a)->tv_usec - (b)->tv_usec; \
+ if ((result)->tv_usec < 0) { \
+ --(result)->tv_sec; \
+ (result)->tv_usec += 1000000; \
+ } \
+} while (0)
+#endif
--- /dev/null
+/*
+ * libusb synchronization using POSIX Threads
+ *
+ * Copyright © 2011 Vitali Lovich <vlovich@aliph.com>
+ * Copyright © 2011 Peter Stuge <peter@stuge.se>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#if defined(__linux__) || defined(__OpenBSD__)
+# if defined(__OpenBSD__)
+# define _BSD_SOURCE
+# endif
+# include <unistd.h>
+# include <sys/syscall.h>
+#elif defined(__APPLE__)
+# include <mach/mach.h>
+#elif defined(__CYGWIN__)
+# include <windows.h>
+#endif
+
+#include "threads_posix.h"
+
+int usbi_mutex_init_recursive(pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int err;
+ pthread_mutexattr_t stack_attr;
+ if (!attr) {
+ attr = &stack_attr;
+ err = pthread_mutexattr_init(&stack_attr);
+ if (err != 0)
+ return err;
+ }
+
+ /* mutexattr_settype requires _GNU_SOURCE or _XOPEN_SOURCE >= 500 on Linux */
+ err = pthread_mutexattr_settype(attr, PTHREAD_MUTEX_RECURSIVE);
+ if (err != 0)
+ goto finish;
+
+ err = pthread_mutex_init(mutex, attr);
+
+finish:
+ if (attr == &stack_attr)
+ pthread_mutexattr_destroy(&stack_attr);
+
+ return err;
+}
+
+int usbi_get_tid(void)
+{
+ int ret = -1;
+#if defined(__ANDROID__)
+ ret = gettid();
+#elif defined(__linux__)
+ ret = syscall(SYS_gettid);
+#elif defined(__OpenBSD__)
+ /* The following only works with OpenBSD > 5.1 as it requires
+ real thread support. For 5.1 and earlier, -1 is returned. */
+ ret = syscall(SYS_getthrid);
+#elif defined(__APPLE__)
+ ret = mach_thread_self();
+ mach_port_deallocate(mach_task_self(), ret);
+#elif defined(__CYGWIN__)
+ ret = GetCurrentThreadId();
+#endif
+/* TODO: NetBSD thread ID support */
+ return ret;
+}
--- /dev/null
+/*
+ * libusb synchronization using POSIX Threads
+ *
+ * Copyright © 2010 Peter Stuge <peter@stuge.se>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSB_THREADS_POSIX_H
+#define LIBUSB_THREADS_POSIX_H
+
+#include <pthread.h>
+
+#define usbi_mutex_static_t pthread_mutex_t
+#define USBI_MUTEX_INITIALIZER PTHREAD_MUTEX_INITIALIZER
+#define usbi_mutex_static_lock pthread_mutex_lock
+#define usbi_mutex_static_unlock pthread_mutex_unlock
+
+#define usbi_mutex_t pthread_mutex_t
+#define usbi_mutex_init pthread_mutex_init
+#define usbi_mutex_lock pthread_mutex_lock
+#define usbi_mutex_unlock pthread_mutex_unlock
+#define usbi_mutex_trylock pthread_mutex_trylock
+#define usbi_mutex_destroy pthread_mutex_destroy
+
+#define usbi_cond_t pthread_cond_t
+#define usbi_cond_init pthread_cond_init
+#define usbi_cond_wait pthread_cond_wait
+#define usbi_cond_timedwait pthread_cond_timedwait
+#define usbi_cond_broadcast pthread_cond_broadcast
+#define usbi_cond_destroy pthread_cond_destroy
+#define usbi_cond_signal pthread_cond_signal
+
+extern int usbi_mutex_init_recursive(pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+
+int usbi_get_tid(void);
+
+#endif /* LIBUSB_THREADS_POSIX_H */
--- /dev/null
+/*
+ * libusb synchronization on Microsoft Windows
+ *
+ * Copyright © 2010 Michael Plante <michael.plante@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <objbase.h>
+#include <errno.h>
+#include <stdarg.h>
+
+#include "libusbi.h"
+
+extern const uint64_t epoch_time;
+
+int usbi_mutex_init(usbi_mutex_t *mutex,
+ const usbi_mutexattr_t *attr) {
+ UNUSED(attr);
+ if(! mutex) return ((errno=EINVAL));
+ *mutex = CreateMutex(NULL, FALSE, NULL);
+ if(!*mutex) return ((errno=ENOMEM));
+ return 0;
+}
+int usbi_mutex_destroy(usbi_mutex_t *mutex) {
+ // It is not clear if CloseHandle failure is due to failure to unlock.
+ // If so, this should be errno=EBUSY.
+ if(!mutex || !CloseHandle(*mutex)) return ((errno=EINVAL));
+ *mutex = NULL;
+ return 0;
+}
+int usbi_mutex_trylock(usbi_mutex_t *mutex) {
+ DWORD result;
+ if(!mutex) return ((errno=EINVAL));
+ result = WaitForSingleObject(*mutex, 0);
+ if(result == WAIT_OBJECT_0 || result == WAIT_ABANDONED)
+ return 0; // acquired (ToDo: check that abandoned is ok)
+ if(result == WAIT_TIMEOUT)
+ return ((errno=EBUSY));
+ return ((errno=EINVAL)); // don't know how this would happen
+ // so don't know proper errno
+}
+int usbi_mutex_lock(usbi_mutex_t *mutex) {
+ DWORD result;
+ if(!mutex) return ((errno=EINVAL));
+ result = WaitForSingleObject(*mutex, INFINITE);
+ if(result == WAIT_OBJECT_0 || result == WAIT_ABANDONED)
+ return 0; // acquired (ToDo: check that abandoned is ok)
+ return ((errno=EINVAL)); // don't know how this would happen
+ // so don't know proper errno
+}
+int usbi_mutex_unlock(usbi_mutex_t *mutex) {
+ if(!mutex) return ((errno=EINVAL));
+ if(!ReleaseMutex(*mutex)) return ((errno=EPERM ));
+ return 0;
+}
+
+int usbi_mutex_static_lock(usbi_mutex_static_t *mutex) {
+ if(!mutex) return ((errno=EINVAL));
+ while (InterlockedExchange((LONG *)mutex, 1) == 1) {
+ SleepEx(0, TRUE);
+ }
+ return 0;
+}
+int usbi_mutex_static_unlock(usbi_mutex_static_t *mutex) {
+ if(!mutex) return ((errno=EINVAL));
+ *mutex = 0;
+ return 0;
+}
+
+int usbi_cond_init(usbi_cond_t *cond,
+ const usbi_condattr_t *attr) {
+ UNUSED(attr);
+ if(!cond) return ((errno=EINVAL));
+ list_init(&cond->waiters );
+ list_init(&cond->not_waiting);
+ return 0;
+}
+int usbi_cond_destroy(usbi_cond_t *cond) {
+ // This assumes no one is using this anymore. The check MAY NOT BE safe.
+ struct usbi_cond_perthread *pos, *next_pos = NULL;
+ if(!cond) return ((errno=EINVAL));
+ if(!list_empty(&cond->waiters)) return ((errno=EBUSY )); // (!see above!)
+ list_for_each_entry_safe(pos, next_pos, &cond->not_waiting, list, struct usbi_cond_perthread) {
+ CloseHandle(pos->event);
+ list_del(&pos->list);
+ free(pos);
+ }
+
+ return 0;
+}
+
+int usbi_cond_broadcast(usbi_cond_t *cond) {
+ // Assumes mutex is locked; this is not in keeping with POSIX spec, but
+ // libusb does this anyway, so we simplify by not adding more sync
+ // primitives to the CV definition!
+ int fail = 0;
+ struct usbi_cond_perthread *pos;
+ if(!cond) return ((errno=EINVAL));
+ list_for_each_entry(pos, &cond->waiters, list, struct usbi_cond_perthread) {
+ if(!SetEvent(pos->event))
+ fail = 1;
+ }
+ // The wait function will remove its respective item from the list.
+ return fail ? ((errno=EINVAL)) : 0;
+}
+int usbi_cond_signal(usbi_cond_t *cond) {
+ // Assumes mutex is locked; this is not in keeping with POSIX spec, but
+ // libusb does this anyway, so we simplify by not adding more sync
+ // primitives to the CV definition!
+ struct usbi_cond_perthread *pos;
+ if(!cond) return ((errno=EINVAL));
+ if(list_empty(&cond->waiters)) return 0; // no one to wakeup.
+ pos = list_entry(&cond->waiters.next, struct usbi_cond_perthread, list);
+ // The wait function will remove its respective item from the list.
+ return SetEvent(pos->event) ? 0 : ((errno=EINVAL));
+}
+__inline static int usbi_cond_intwait(usbi_cond_t *cond,
+ usbi_mutex_t *mutex,
+ DWORD timeout_ms) {
+ struct usbi_cond_perthread *pos;
+ int found = 0, r;
+ DWORD r2,tid = GetCurrentThreadId();
+ if(!cond || !mutex) return ((errno=EINVAL));
+ list_for_each_entry(pos, &cond->not_waiting, list, struct usbi_cond_perthread) {
+ if(tid == pos->tid) {
+ found = 1;
+ break;
+ }
+ }
+ if(!found) {
+ pos = (struct usbi_cond_perthread*) calloc(1, sizeof(struct usbi_cond_perthread));
+ if(!pos) return ((errno=ENOMEM)); // This errno is not POSIX-allowed.
+ pos->tid = tid;
+ pos->event = CreateEvent(NULL, FALSE, FALSE, NULL); // auto-reset.
+ if(!pos->event) {
+ free(pos);
+ return ((errno=ENOMEM));
+ }
+ list_add(&pos->list, &cond->not_waiting);
+ }
+
+ list_del(&pos->list); // remove from not_waiting list.
+ list_add(&pos->list, &cond->waiters);
+
+ r = usbi_mutex_unlock(mutex);
+ if(r) return r;
+ r2 = WaitForSingleObject(pos->event, timeout_ms);
+ r = usbi_mutex_lock(mutex);
+ if(r) return r;
+
+ list_del(&pos->list);
+ list_add(&pos->list, &cond->not_waiting);
+
+ if(r2 == WAIT_TIMEOUT) return ((errno=ETIMEDOUT));
+
+ return 0;
+}
+// N.B.: usbi_cond_*wait() can also return ENOMEM, even though pthread_cond_*wait cannot!
+int usbi_cond_wait(usbi_cond_t *cond, usbi_mutex_t *mutex) {
+ return usbi_cond_intwait(cond, mutex, INFINITE);
+}
+int usbi_cond_timedwait(usbi_cond_t *cond,
+ usbi_mutex_t *mutex,
+ const struct timespec *abstime) {
+ FILETIME filetime;
+ ULARGE_INTEGER rtime;
+ struct timeval targ_time, cur_time, delta_time;
+ struct timespec cur_time_ns;
+ DWORD millis;
+
+ // GetSystemTimeAsFileTime() is not available on CE
+ SYSTEMTIME st;
+ GetSystemTime(&st);
+ if (!SystemTimeToFileTime(&st, &filetime))
+ return 0;
+ rtime.LowPart = filetime.dwLowDateTime;
+ rtime.HighPart = filetime.dwHighDateTime;
+ rtime.QuadPart -= epoch_time;
+ cur_time_ns.tv_sec = (long)(rtime.QuadPart / 10000000);
+ cur_time_ns.tv_nsec = (long)((rtime.QuadPart % 10000000)*100);
+ TIMESPEC_TO_TIMEVAL(&cur_time, &cur_time_ns);
+
+ TIMESPEC_TO_TIMEVAL(&targ_time, abstime);
+ timersub(&targ_time, &cur_time, &delta_time);
+ if(delta_time.tv_sec < 0) // abstime already passed?
+ millis = 0;
+ else {
+ millis = delta_time.tv_usec/1000;
+ millis += delta_time.tv_sec *1000;
+ if (delta_time.tv_usec % 1000) // round up to next millisecond
+ millis++;
+ }
+
+ return usbi_cond_intwait(cond, mutex, millis);
+}
+
+int usbi_get_tid(void) {
+ return GetCurrentThreadId();
+}
--- /dev/null
+/*
+ * libusb synchronization on Microsoft Windows
+ *
+ * Copyright © 2010 Michael Plante <michael.plante@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSB_THREADS_WINDOWS_H
+#define LIBUSB_THREADS_WINDOWS_H
+
+#define usbi_mutex_static_t volatile LONG
+#define USBI_MUTEX_INITIALIZER 0
+
+#define usbi_mutex_t HANDLE
+
+struct usbi_cond_perthread {
+ struct list_head list;
+ DWORD tid;
+ HANDLE event;
+};
+struct usbi_cond_t_ {
+ // Every time a thread touches the CV, it winds up in one of these lists.
+ // It stays there until the CV is destroyed, even if the thread
+ // terminates.
+ struct list_head waiters;
+ struct list_head not_waiting;
+};
+typedef struct usbi_cond_t_ usbi_cond_t;
+
+// We *were* getting timespec from pthread.h:
+#if (!defined(HAVE_STRUCT_TIMESPEC) && !defined(_TIMESPEC_DEFINED))
+#define HAVE_STRUCT_TIMESPEC 1
+#define _TIMESPEC_DEFINED 1
+struct timespec {
+ long tv_sec;
+ long tv_nsec;
+};
+#endif /* HAVE_STRUCT_TIMESPEC | _TIMESPEC_DEFINED */
+
+// We *were* getting ETIMEDOUT from pthread.h:
+#ifndef ETIMEDOUT
+# define ETIMEDOUT 10060 /* This is the value in winsock.h. */
+#endif
+
+#define usbi_mutexattr_t void
+#define usbi_condattr_t void
+
+// all Windows mutexes are recursive
+#define usbi_mutex_init_recursive(mutex, attr) usbi_mutex_init((mutex), (attr))
+
+int usbi_mutex_static_lock(usbi_mutex_static_t *mutex);
+int usbi_mutex_static_unlock(usbi_mutex_static_t *mutex);
+
+
+int usbi_mutex_init(usbi_mutex_t *mutex,
+ const usbi_mutexattr_t *attr);
+int usbi_mutex_lock(usbi_mutex_t *mutex);
+int usbi_mutex_unlock(usbi_mutex_t *mutex);
+int usbi_mutex_trylock(usbi_mutex_t *mutex);
+int usbi_mutex_destroy(usbi_mutex_t *mutex);
+
+int usbi_cond_init(usbi_cond_t *cond,
+ const usbi_condattr_t *attr);
+int usbi_cond_destroy(usbi_cond_t *cond);
+int usbi_cond_wait(usbi_cond_t *cond, usbi_mutex_t *mutex);
+int usbi_cond_timedwait(usbi_cond_t *cond,
+ usbi_mutex_t *mutex,
+ const struct timespec *abstime);
+int usbi_cond_broadcast(usbi_cond_t *cond);
+int usbi_cond_signal(usbi_cond_t *cond);
+
+int usbi_get_tid(void);
+
+#endif /* LIBUSB_THREADS_WINDOWS_H */
--- /dev/null
+/*
+ * Windows CE backend for libusb 1.0
+ * Copyright © 2011-2013 RealVNC Ltd.
+ * Large portions taken from Windows backend, which is
+ * Copyright © 2009-2010 Pete Batard <pbatard@gmail.com>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of this code adapted from libusb-win32-v1 by Stephan Meyer
+ * Major code testing contribution by Xiaofan Chen
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <stdint.h>
+#include <inttypes.h>
+
+#include "libusbi.h"
+#include "wince_usb.h"
+
+// Global variables
+uint64_t hires_frequency, hires_ticks_to_ps;
+const uint64_t epoch_time = UINT64_C(116444736000000000); // 1970.01.01 00:00:000 in MS Filetime
+int windows_version = WINDOWS_CE;
+static int concurrent_usage = -1;
+HANDLE driver_handle = INVALID_HANDLE_VALUE;
+
+/*
+ * Converts a windows error to human readable string
+ * uses retval as errorcode, or, if 0, use GetLastError()
+ */
+#if defined(ENABLE_LOGGING)
+static char* windows_error_str(uint32_t retval)
+{
+ static TCHAR wErr_string[ERR_BUFFER_SIZE];
+ static char err_string[ERR_BUFFER_SIZE];
+
+ DWORD size;
+ size_t i;
+ uint32_t error_code, format_error;
+
+ error_code = retval?retval:GetLastError();
+
+ safe_stprintf(wErr_string, ERR_BUFFER_SIZE, _T("[%d] "), error_code);
+
+ size = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error_code,
+ MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), &wErr_string[safe_tcslen(wErr_string)],
+ ERR_BUFFER_SIZE - (DWORD)safe_tcslen(wErr_string), NULL);
+ if (size == 0) {
+ format_error = GetLastError();
+ if (format_error)
+ safe_stprintf(wErr_string, ERR_BUFFER_SIZE,
+ _T("Windows error code %u (FormatMessage error code %u)"), error_code, format_error);
+ else
+ safe_stprintf(wErr_string, ERR_BUFFER_SIZE, _T("Unknown error code %u"), error_code);
+ } else {
+ // Remove CR/LF terminators
+ for (i=safe_tcslen(wErr_string)-1; ((wErr_string[i]==0x0A) || (wErr_string[i]==0x0D)); i--) {
+ wErr_string[i] = 0;
+ }
+ }
+ if (WideCharToMultiByte(CP_ACP, 0, wErr_string, -1, err_string, ERR_BUFFER_SIZE, NULL, NULL) < 0)
+ {
+ strcpy(err_string, "Unable to convert error string");
+ }
+ return err_string;
+}
+#endif
+
+static struct wince_device_priv *_device_priv(struct libusb_device *dev)
+{
+ return (struct wince_device_priv *) dev->os_priv;
+}
+
+// ceusbkwrapper to libusb error code mapping
+static int translate_driver_error(int error)
+{
+ switch (error) {
+ case ERROR_INVALID_PARAMETER:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case ERROR_CALL_NOT_IMPLEMENTED:
+ case ERROR_NOT_SUPPORTED:
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ case ERROR_NOT_ENOUGH_MEMORY:
+ return LIBUSB_ERROR_NO_MEM;
+ case ERROR_INVALID_HANDLE:
+ return LIBUSB_ERROR_NO_DEVICE;
+ case ERROR_BUSY:
+ return LIBUSB_ERROR_BUSY;
+
+ // Error codes that are either unexpected, or have
+ // no suitable LIBUSB_ERROR equivilant.
+ case ERROR_CANCELLED:
+ case ERROR_INTERNAL_ERROR:
+ default:
+ return LIBUSB_ERROR_OTHER;
+ }
+}
+
+static int init_dllimports()
+{
+ DLL_LOAD(ceusbkwrapper.dll, UkwOpenDriver, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwGetDeviceList, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwReleaseDeviceList, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwGetDeviceAddress, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwGetDeviceDescriptor, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwGetConfigDescriptor, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwCloseDriver, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwCancelTransfer, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwIssueControlTransfer, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwClaimInterface, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwReleaseInterface, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwSetInterfaceAlternateSetting, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwClearHaltHost, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwClearHaltDevice, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwGetConfig, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwSetConfig, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwResetDevice, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwKernelDriverActive, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwAttachKernelDriver, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwDetachKernelDriver, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwIssueBulkTransfer, TRUE);
+ DLL_LOAD(ceusbkwrapper.dll, UkwIsPipeHalted, TRUE);
+ return LIBUSB_SUCCESS;
+}
+
+static int init_device(
+ struct libusb_device *dev, UKW_DEVICE drv_dev,
+ unsigned char bus_addr, unsigned char dev_addr)
+{
+ struct wince_device_priv *priv = _device_priv(dev);
+ int r = LIBUSB_SUCCESS;
+
+ dev->bus_number = bus_addr;
+ dev->device_address = dev_addr;
+ priv->dev = drv_dev;
+
+ if (!UkwGetDeviceDescriptor(priv->dev, &(priv->desc))) {
+ r = translate_driver_error(GetLastError());
+ }
+ return r;
+}
+
+// Internal API functions
+static int wince_init(struct libusb_context *ctx)
+{
+ int r = LIBUSB_ERROR_OTHER;
+ HANDLE semaphore;
+ LARGE_INTEGER li_frequency;
+ TCHAR sem_name[11+1+8]; // strlen(libusb_init)+'\0'+(32-bit hex PID)
+
+ _stprintf(sem_name, _T("libusb_init%08X"), (unsigned int)GetCurrentProcessId()&0xFFFFFFFF);
+ semaphore = CreateSemaphore(NULL, 1, 1, sem_name);
+ if (semaphore == NULL) {
+ usbi_err(ctx, "could not create semaphore: %s", windows_error_str(0));
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // A successful wait brings our semaphore count to 0 (unsignaled)
+ // => any concurent wait stalls until the semaphore's release
+ if (WaitForSingleObject(semaphore, INFINITE) != WAIT_OBJECT_0) {
+ usbi_err(ctx, "failure to access semaphore: %s", windows_error_str(0));
+ CloseHandle(semaphore);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // NB: concurrent usage supposes that init calls are equally balanced with
+ // exit calls. If init is called more than exit, we will not exit properly
+ if ( ++concurrent_usage == 0 ) { // First init?
+ // Initialize pollable file descriptors
+ init_polling();
+
+ // Load DLL imports
+ if (init_dllimports() != LIBUSB_SUCCESS) {
+ usbi_err(ctx, "could not resolve DLL functions");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ goto init_exit;
+ }
+
+ // try to open a handle to the driver
+ driver_handle = UkwOpenDriver();
+ if (driver_handle == INVALID_HANDLE_VALUE) {
+ usbi_err(ctx, "could not connect to driver");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ goto init_exit;
+ }
+
+ // find out if we have access to a monotonic (hires) timer
+ if (QueryPerformanceFrequency(&li_frequency)) {
+ hires_frequency = li_frequency.QuadPart;
+ // The hires frequency can go as high as 4 GHz, so we'll use a conversion
+ // to picoseconds to compute the tv_nsecs part in clock_gettime
+ hires_ticks_to_ps = UINT64_C(1000000000000) / hires_frequency;
+ usbi_dbg("hires timer available (Frequency: %"PRIu64" Hz)", hires_frequency);
+ } else {
+ usbi_dbg("no hires timer available on this platform");
+ hires_frequency = 0;
+ hires_ticks_to_ps = UINT64_C(0);
+ }
+ }
+ // At this stage, either we went through full init successfully, or didn't need to
+ r = LIBUSB_SUCCESS;
+
+init_exit: // Holds semaphore here.
+ if (!concurrent_usage && r != LIBUSB_SUCCESS) { // First init failed?
+ if (driver_handle != INVALID_HANDLE_VALUE) {
+ UkwCloseDriver(driver_handle);
+ driver_handle = INVALID_HANDLE_VALUE;
+ }
+ }
+
+ if (r != LIBUSB_SUCCESS)
+ --concurrent_usage; // Not expected to call libusb_exit if we failed.
+
+ ReleaseSemaphore(semaphore, 1, NULL); // increase count back to 1
+ CloseHandle(semaphore);
+ return r;
+}
+
+static void wince_exit(void)
+{
+ HANDLE semaphore;
+ TCHAR sem_name[11+1+8]; // strlen(libusb_init)+'\0'+(32-bit hex PID)
+
+ _stprintf(sem_name, _T("libusb_init%08X"), (unsigned int)GetCurrentProcessId()&0xFFFFFFFF);
+ semaphore = CreateSemaphore(NULL, 1, 1, sem_name);
+ if (semaphore == NULL) {
+ return;
+ }
+
+ // A successful wait brings our semaphore count to 0 (unsignaled)
+ // => any concurent wait stalls until the semaphore release
+ if (WaitForSingleObject(semaphore, INFINITE) != WAIT_OBJECT_0) {
+ CloseHandle(semaphore);
+ return;
+ }
+
+ // Only works if exits and inits are balanced exactly
+ if (--concurrent_usage < 0) { // Last exit
+ exit_polling();
+
+ if (driver_handle != INVALID_HANDLE_VALUE) {
+ UkwCloseDriver(driver_handle);
+ driver_handle = INVALID_HANDLE_VALUE;
+ }
+ }
+
+ ReleaseSemaphore(semaphore, 1, NULL); // increase count back to 1
+ CloseHandle(semaphore);
+}
+
+static int wince_get_device_list(
+ struct libusb_context *ctx,
+ struct discovered_devs **discdevs)
+{
+ UKW_DEVICE devices[MAX_DEVICE_COUNT];
+ struct discovered_devs * new_devices = *discdevs;
+ DWORD count = 0, i;
+ struct libusb_device *dev = NULL;
+ unsigned char bus_addr, dev_addr;
+ unsigned long session_id;
+ BOOL success;
+ DWORD release_list_offset = 0;
+ int r = LIBUSB_SUCCESS;
+
+ success = UkwGetDeviceList(driver_handle, devices, MAX_DEVICE_COUNT, &count);
+ if (!success) {
+ int libusbErr = translate_driver_error(GetLastError());
+ usbi_err(ctx, "could not get devices: %s", windows_error_str(0));
+ return libusbErr;
+ }
+ for(i = 0; i < count; ++i) {
+ release_list_offset = i;
+ success = UkwGetDeviceAddress(devices[i], &bus_addr, &dev_addr, &session_id);
+ if (!success) {
+ r = translate_driver_error(GetLastError());
+ usbi_err(ctx, "could not get device address for %d: %s", i, windows_error_str(0));
+ goto err_out;
+ }
+ dev = usbi_get_device_by_session_id(ctx, session_id);
+ if (dev) {
+ usbi_dbg("using existing device for %d/%d (session %ld)",
+ bus_addr, dev_addr, session_id);
+ // Release just this element in the device list (as we already hold a
+ // reference to it).
+ UkwReleaseDeviceList(driver_handle, &devices[i], 1);
+ release_list_offset++;
+ } else {
+ usbi_dbg("allocating new device for %d/%d (session %ld)",
+ bus_addr, dev_addr, session_id);
+ dev = usbi_alloc_device(ctx, session_id);
+ if (!dev) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err_out;
+ }
+ r = init_device(dev, devices[i], bus_addr, dev_addr);
+ if (r < 0)
+ goto err_out;
+ r = usbi_sanitize_device(dev);
+ if (r < 0)
+ goto err_out;
+ }
+ new_devices = discovered_devs_append(new_devices, dev);
+ if (!discdevs) {
+ r = LIBUSB_ERROR_NO_MEM;
+ goto err_out;
+ }
+ safe_unref_device(dev);
+ }
+ *discdevs = new_devices;
+ return r;
+err_out:
+ *discdevs = new_devices;
+ safe_unref_device(dev);
+ // Release the remainder of the unprocessed device list.
+ // The devices added to new_devices already will still be passed up to libusb,
+ // which can dispose of them at its leisure.
+ UkwReleaseDeviceList(driver_handle, &devices[release_list_offset], count - release_list_offset);
+ return r;
+}
+
+static int wince_open(struct libusb_device_handle *handle)
+{
+ // Nothing to do to open devices as a handle to it has
+ // been retrieved by wince_get_device_list
+ return LIBUSB_SUCCESS;
+}
+
+static void wince_close(struct libusb_device_handle *handle)
+{
+ // Nothing to do as wince_open does nothing.
+}
+
+static int wince_get_device_descriptor(
+ struct libusb_device *device,
+ unsigned char *buffer, int *host_endian)
+{
+ struct wince_device_priv *priv = _device_priv(device);
+
+ *host_endian = 1;
+ memcpy(buffer, &priv->desc, DEVICE_DESC_LENGTH);
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_get_active_config_descriptor(
+ struct libusb_device *device,
+ unsigned char *buffer, size_t len, int *host_endian)
+{
+ struct wince_device_priv *priv = _device_priv(device);
+ DWORD actualSize = len;
+ *host_endian = 0;
+ if (!UkwGetConfigDescriptor(priv->dev, UKW_ACTIVE_CONFIGURATION, buffer, len, &actualSize)) {
+ return translate_driver_error(GetLastError());
+ }
+ return actualSize;
+}
+
+static int wince_get_config_descriptor(
+ struct libusb_device *device,
+ uint8_t config_index,
+ unsigned char *buffer, size_t len, int *host_endian)
+{
+ struct wince_device_priv *priv = _device_priv(device);
+ DWORD actualSize = len;
+ *host_endian = 0;
+ if (!UkwGetConfigDescriptor(priv->dev, config_index, buffer, len, &actualSize)) {
+ return translate_driver_error(GetLastError());
+ }
+ return actualSize;
+}
+
+static int wince_get_configuration(
+ struct libusb_device_handle *handle,
+ int *config)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ UCHAR cv = 0;
+ if (!UkwGetConfig(priv->dev, &cv)) {
+ return translate_driver_error(GetLastError());
+ }
+ (*config) = cv;
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_set_configuration(
+ struct libusb_device_handle *handle,
+ int config)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ // Setting configuration 0 places the device in Address state.
+ // This should correspond to the "unconfigured state" required by
+ // libusb when the specified configuration is -1.
+ UCHAR cv = (config < 0) ? 0 : config;
+ if (!UkwSetConfig(priv->dev, cv)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_claim_interface(
+ struct libusb_device_handle *handle,
+ int interface_number)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwClaimInterface(priv->dev, interface_number)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_release_interface(
+ struct libusb_device_handle *handle,
+ int interface_number)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwSetInterfaceAlternateSetting(priv->dev, interface_number, 0)) {
+ return translate_driver_error(GetLastError());
+ }
+ if (!UkwReleaseInterface(priv->dev, interface_number)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_set_interface_altsetting(
+ struct libusb_device_handle *handle,
+ int interface_number, int altsetting)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwSetInterfaceAlternateSetting(priv->dev, interface_number, altsetting)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_clear_halt(
+ struct libusb_device_handle *handle,
+ unsigned char endpoint)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwClearHaltHost(priv->dev, endpoint)) {
+ return translate_driver_error(GetLastError());
+ }
+ if (!UkwClearHaltDevice(priv->dev, endpoint)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_reset_device(
+ struct libusb_device_handle *handle)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwResetDevice(priv->dev)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_kernel_driver_active(
+ struct libusb_device_handle *handle,
+ int interface_number)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ BOOL result = FALSE;
+ if (!UkwKernelDriverActive(priv->dev, interface_number, &result)) {
+ return translate_driver_error(GetLastError());
+ }
+ return result ? 1 : 0;
+}
+
+static int wince_detach_kernel_driver(
+ struct libusb_device_handle *handle,
+ int interface_number)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwDetachKernelDriver(priv->dev, interface_number)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_attach_kernel_driver(
+ struct libusb_device_handle *handle,
+ int interface_number)
+{
+ struct wince_device_priv *priv = _device_priv(handle->dev);
+ if (!UkwAttachKernelDriver(priv->dev, interface_number)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static void wince_destroy_device(struct libusb_device *dev)
+{
+ struct wince_device_priv *priv = _device_priv(dev);
+ UkwReleaseDeviceList(driver_handle, &priv->dev, 1);
+}
+
+static void wince_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+ struct wince_transfer_priv *transfer_priv = (struct wince_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct winfd wfd = fd_to_winfd(transfer_priv->pollable_fd.fd);
+ // No need to cancel transfer as it is either complete or abandoned
+ wfd.itransfer = NULL;
+ CloseHandle(wfd.handle);
+ usbi_free_fd(&transfer_priv->pollable_fd);
+}
+
+static int wince_cancel_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct wince_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ struct wince_transfer_priv *transfer_priv = (struct wince_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+
+ if (!UkwCancelTransfer(priv->dev, transfer_priv->pollable_fd.overlapped, UKW_TF_NO_WAIT)) {
+ return translate_driver_error(GetLastError());
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_submit_control_or_bulk_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct wince_transfer_priv *transfer_priv = (struct wince_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct wince_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ BOOL direction_in, ret;
+ struct winfd wfd;
+ DWORD flags;
+ HANDLE eventHandle;
+ PUKW_CONTROL_HEADER setup = NULL;
+ const BOOL control_transfer = transfer->type == LIBUSB_TRANSFER_TYPE_CONTROL;
+
+ transfer_priv->pollable_fd = INVALID_WINFD;
+ if (control_transfer) {
+ setup = (PUKW_CONTROL_HEADER) transfer->buffer;
+ direction_in = setup->bmRequestType & LIBUSB_ENDPOINT_IN;
+ } else {
+ direction_in = transfer->endpoint & LIBUSB_ENDPOINT_IN;
+ }
+ flags = direction_in ? UKW_TF_IN_TRANSFER : UKW_TF_OUT_TRANSFER;
+ flags |= UKW_TF_SHORT_TRANSFER_OK;
+
+ eventHandle = CreateEvent(NULL, FALSE, FALSE, NULL);
+ if (eventHandle == NULL) {
+ usbi_err(ctx, "Failed to create event for async transfer");
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ wfd = usbi_create_fd(eventHandle, direction_in ? RW_READ : RW_WRITE, itransfer, &wince_cancel_transfer);
+ if (wfd.fd < 0) {
+ CloseHandle(eventHandle);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ transfer_priv->pollable_fd = wfd;
+ if (control_transfer) {
+ // Split out control setup header and data buffer
+ DWORD bufLen = transfer->length - sizeof(UKW_CONTROL_HEADER);
+ PVOID buf = (PVOID) &transfer->buffer[sizeof(UKW_CONTROL_HEADER)];
+
+ ret = UkwIssueControlTransfer(priv->dev, flags, setup, buf, bufLen, &transfer->actual_length, wfd.overlapped);
+ } else {
+ ret = UkwIssueBulkTransfer(priv->dev, flags, transfer->endpoint, transfer->buffer,
+ transfer->length, &transfer->actual_length, wfd.overlapped);
+ }
+ if (!ret) {
+ int libusbErr = translate_driver_error(GetLastError());
+ usbi_err(ctx, "UkwIssue%sTransfer failed: error %d",
+ control_transfer ? "Control" : "Bulk", GetLastError());
+ wince_clear_transfer_priv(itransfer);
+ return libusbErr;
+ }
+ usbi_add_pollfd(ctx, transfer_priv->pollable_fd.fd, direction_in ? POLLIN : POLLOUT);
+
+ return LIBUSB_SUCCESS;
+}
+
+static int wince_submit_iso_transfer(struct usbi_transfer *itransfer)
+{
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static int wince_submit_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ return wince_submit_control_or_bulk_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return wince_submit_iso_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ default:
+ usbi_err(TRANSFER_CTX(transfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static void wince_transfer_callback(
+ struct usbi_transfer *itransfer,
+ uint32_t io_result, uint32_t io_size)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct wince_transfer_priv *transfer_priv = (struct wince_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct wince_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int status;
+
+ usbi_dbg("handling I/O completion with errcode %d", io_result);
+
+ if (io_result == ERROR_NOT_SUPPORTED &&
+ transfer->type != LIBUSB_TRANSFER_TYPE_CONTROL) {
+ /* For functional stalls, the WinCE USB layer (and therefore the USB Kernel Wrapper
+ * Driver) will report USB_ERROR_STALL/ERROR_NOT_SUPPORTED in situations where the
+ * endpoint isn't actually stalled.
+ *
+ * One example of this is that some devices will occasionally fail to reply to an IN
+ * token. The WinCE USB layer carries on with the transaction until it is completed
+ * (or cancelled) but then completes it with USB_ERROR_STALL.
+ *
+ * This code therefore needs to confirm that there really is a stall error, by both
+ * checking the pipe status and requesting the endpoint status from the device.
+ */
+ BOOL halted = FALSE;
+ usbi_dbg("checking I/O completion with errcode ERROR_NOT_SUPPORTED is really a stall");
+ if (UkwIsPipeHalted(priv->dev, transfer->endpoint, &halted)) {
+ /* Pipe status retrieved, so now request endpoint status by sending a GET_STATUS
+ * control request to the device. This is done synchronously, which is a bit
+ * naughty, but this is a special corner case.
+ */
+ WORD wStatus = 0;
+ DWORD written = 0;
+ UKW_CONTROL_HEADER ctrlHeader;
+ ctrlHeader.bmRequestType = LIBUSB_REQUEST_TYPE_STANDARD |
+ LIBUSB_ENDPOINT_IN | LIBUSB_RECIPIENT_ENDPOINT;
+ ctrlHeader.bRequest = LIBUSB_REQUEST_GET_STATUS;
+ ctrlHeader.wValue = 0;
+ ctrlHeader.wIndex = transfer->endpoint;
+ ctrlHeader.wLength = sizeof(wStatus);
+ if (UkwIssueControlTransfer(priv->dev,
+ UKW_TF_IN_TRANSFER | UKW_TF_SEND_TO_ENDPOINT,
+ &ctrlHeader, &wStatus, sizeof(wStatus), &written, NULL)) {
+ if (written == sizeof(wStatus) &&
+ (wStatus & STATUS_HALT_FLAG) == 0) {
+ if (!halted || UkwClearHaltHost(priv->dev, transfer->endpoint)) {
+ usbi_dbg("Endpoint doesn't appear to be stalled, overriding error with success");
+ io_result = ERROR_SUCCESS;
+ } else {
+ usbi_dbg("Endpoint doesn't appear to be stalled, but the host is halted, changing error");
+ io_result = ERROR_IO_DEVICE;
+ }
+ }
+ }
+ }
+ }
+
+ switch(io_result) {
+ case ERROR_SUCCESS:
+ itransfer->transferred += io_size;
+ status = LIBUSB_TRANSFER_COMPLETED;
+ break;
+ case ERROR_CANCELLED:
+ usbi_dbg("detected transfer cancel");
+ status = LIBUSB_TRANSFER_CANCELLED;
+ break;
+ case ERROR_NOT_SUPPORTED:
+ case ERROR_GEN_FAILURE:
+ usbi_dbg("detected endpoint stall");
+ status = LIBUSB_TRANSFER_STALL;
+ break;
+ case ERROR_SEM_TIMEOUT:
+ usbi_dbg("detected semaphore timeout");
+ status = LIBUSB_TRANSFER_TIMED_OUT;
+ break;
+ case ERROR_OPERATION_ABORTED:
+ if (itransfer->flags & USBI_TRANSFER_TIMED_OUT) {
+ usbi_dbg("detected timeout");
+ status = LIBUSB_TRANSFER_TIMED_OUT;
+ } else {
+ usbi_dbg("detected operation aborted");
+ status = LIBUSB_TRANSFER_CANCELLED;
+ }
+ break;
+ default:
+ usbi_err(ITRANSFER_CTX(itransfer), "detected I/O error: %s", windows_error_str(io_result));
+ status = LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+ wince_clear_transfer_priv(itransfer);
+ if (status == LIBUSB_TRANSFER_CANCELLED) {
+ usbi_handle_transfer_cancellation(itransfer);
+ } else {
+ usbi_handle_transfer_completion(itransfer, (enum libusb_transfer_status)status);
+ }
+}
+
+static void wince_handle_callback(
+ struct usbi_transfer *itransfer,
+ uint32_t io_result, uint32_t io_size)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ wince_transfer_callback (itransfer, io_result, io_size);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ break;
+ default:
+ usbi_err(ITRANSFER_CTX(itransfer), "unknown endpoint type %d", transfer->type);
+ }
+}
+
+static int wince_handle_events(
+ struct libusb_context *ctx,
+ struct pollfd *fds, POLL_NFDS_TYPE nfds, int num_ready)
+{
+ struct wince_transfer_priv* transfer_priv = NULL;
+ POLL_NFDS_TYPE i = 0;
+ BOOL found = FALSE;
+ struct usbi_transfer *transfer;
+ DWORD io_size, io_result;
+
+ usbi_mutex_lock(&ctx->open_devs_lock);
+ for (i = 0; i < nfds && num_ready > 0; i++) {
+
+ usbi_dbg("checking fd %d with revents = %04x", fds[i].fd, fds[i].revents);
+
+ if (!fds[i].revents) {
+ continue;
+ }
+
+ num_ready--;
+
+ // Because a Windows OVERLAPPED is used for poll emulation,
+ // a pollable fd is created and stored with each transfer
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
+ transfer_priv = usbi_transfer_get_os_priv(transfer);
+ if (transfer_priv->pollable_fd.fd == fds[i].fd) {
+ found = TRUE;
+ break;
+ }
+ }
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ if (found && HasOverlappedIoCompleted(transfer_priv->pollable_fd.overlapped)) {
+ io_result = (DWORD)transfer_priv->pollable_fd.overlapped->Internal;
+ io_size = (DWORD)transfer_priv->pollable_fd.overlapped->InternalHigh;
+ usbi_remove_pollfd(ctx, transfer_priv->pollable_fd.fd);
+ // let handle_callback free the event using the transfer wfd
+ // If you don't use the transfer wfd, you run a risk of trying to free a
+ // newly allocated wfd that took the place of the one from the transfer.
+ wince_handle_callback(transfer, io_result, io_size);
+ } else if (found) {
+ usbi_err(ctx, "matching transfer for fd %x has not completed", fds[i]);
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ return LIBUSB_ERROR_OTHER;
+ } else {
+ usbi_err(ctx, "could not find a matching transfer for fd %x", fds[i]);
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * Monotonic and real time functions
+ */
+static int wince_clock_gettime(int clk_id, struct timespec *tp)
+{
+ LARGE_INTEGER hires_counter;
+ ULARGE_INTEGER rtime;
+ FILETIME filetime;
+ SYSTEMTIME st;
+ switch(clk_id) {
+ case USBI_CLOCK_MONOTONIC:
+ if (hires_frequency != 0 && QueryPerformanceCounter(&hires_counter)) {
+ tp->tv_sec = (long)(hires_counter.QuadPart / hires_frequency);
+ tp->tv_nsec = (long)(((hires_counter.QuadPart % hires_frequency) / 1000) * hires_ticks_to_ps);
+ return LIBUSB_SUCCESS;
+ }
+ // Fall through and return real-time if monotonic read failed or was not detected @ init
+ case USBI_CLOCK_REALTIME:
+ // We follow http://msdn.microsoft.com/en-us/library/ms724928%28VS.85%29.aspx
+ // with a predef epoch_time to have an epoch that starts at 1970.01.01 00:00
+ // Note however that our resolution is bounded by the Windows system time
+ // functions and is at best of the order of 1 ms (or, usually, worse)
+ GetSystemTime(&st);
+ SystemTimeToFileTime(&st, &filetime);
+ rtime.LowPart = filetime.dwLowDateTime;
+ rtime.HighPart = filetime.dwHighDateTime;
+ rtime.QuadPart -= epoch_time;
+ tp->tv_sec = (long)(rtime.QuadPart / 10000000);
+ tp->tv_nsec = (long)((rtime.QuadPart % 10000000)*100);
+ return LIBUSB_SUCCESS;
+ default:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+const struct usbi_os_backend wince_backend = {
+ "Windows CE",
+ 0,
+ wince_init,
+ wince_exit,
+
+ wince_get_device_list,
+ NULL, /* hotplug_poll */
+ wince_open,
+ wince_close,
+
+ wince_get_device_descriptor,
+ wince_get_active_config_descriptor,
+ wince_get_config_descriptor,
+ NULL, /* get_config_descriptor_by_value() */
+
+ wince_get_configuration,
+ wince_set_configuration,
+ wince_claim_interface,
+ wince_release_interface,
+
+ wince_set_interface_altsetting,
+ wince_clear_halt,
+ wince_reset_device,
+
+ NULL, /* alloc_streams */
+ NULL, /* free_streams */
+
+ wince_kernel_driver_active,
+ wince_detach_kernel_driver,
+ wince_attach_kernel_driver,
+
+ wince_destroy_device,
+
+ wince_submit_transfer,
+ wince_cancel_transfer,
+ wince_clear_transfer_priv,
+
+ wince_handle_events,
+ NULL, /* handle_transfer_completion() */
+
+ wince_clock_gettime,
+ sizeof(struct wince_device_priv),
+ sizeof(struct wince_device_handle_priv),
+ sizeof(struct wince_transfer_priv),
+};
--- /dev/null
+/*
+ * Windows CE backend for libusb 1.0
+ * Copyright © 2011-2013 RealVNC Ltd.
+ * Portions taken from Windows backend, which is
+ * Copyright © 2009-2010 Pete Batard <pbatard@gmail.com>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of this code adapted from libusb-win32-v1 by Stephan Meyer
+ * Major code testing contribution by Xiaofan Chen
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#pragma once
+
+#include "windows_common.h"
+
+#include <windows.h>
+#include "poll_windows.h"
+
+#define MAX_DEVICE_COUNT 256
+
+// This is a modified dump of the types in the ceusbkwrapper.h library header
+// with functions transformed into extern pointers.
+//
+// This backend dynamically loads ceusbkwrapper.dll and doesn't include
+// ceusbkwrapper.h directly to simplify the build process. The kernel
+// side wrapper driver is built using the platform image build tools,
+// which makes it difficult to reference directly from the libusb build
+// system.
+struct UKW_DEVICE_PRIV;
+typedef struct UKW_DEVICE_PRIV *UKW_DEVICE;
+typedef UKW_DEVICE *PUKW_DEVICE, *LPUKW_DEVICE;
+
+typedef struct {
+ UINT8 bLength;
+ UINT8 bDescriptorType;
+ UINT16 bcdUSB;
+ UINT8 bDeviceClass;
+ UINT8 bDeviceSubClass;
+ UINT8 bDeviceProtocol;
+ UINT8 bMaxPacketSize0;
+ UINT16 idVendor;
+ UINT16 idProduct;
+ UINT16 bcdDevice;
+ UINT8 iManufacturer;
+ UINT8 iProduct;
+ UINT8 iSerialNumber;
+ UINT8 bNumConfigurations;
+} UKW_DEVICE_DESCRIPTOR, *PUKW_DEVICE_DESCRIPTOR, *LPUKW_DEVICE_DESCRIPTOR;
+
+typedef struct {
+ UINT8 bmRequestType;
+ UINT8 bRequest;
+ UINT16 wValue;
+ UINT16 wIndex;
+ UINT16 wLength;
+} UKW_CONTROL_HEADER, *PUKW_CONTROL_HEADER, *LPUKW_CONTROL_HEADER;
+
+// Collection of flags which can be used when issuing transfer requests
+/* Indicates that the transfer direction is 'in' */
+#define UKW_TF_IN_TRANSFER 0x00000001
+/* Indicates that the transfer direction is 'out' */
+#define UKW_TF_OUT_TRANSFER 0x00000000
+/* Specifies that the transfer should complete as soon as possible,
+ * even if no OVERLAPPED structure has been provided. */
+#define UKW_TF_NO_WAIT 0x00000100
+/* Indicates that transfers shorter than the buffer are ok */
+#define UKW_TF_SHORT_TRANSFER_OK 0x00000200
+#define UKW_TF_SEND_TO_DEVICE 0x00010000
+#define UKW_TF_SEND_TO_INTERFACE 0x00020000
+#define UKW_TF_SEND_TO_ENDPOINT 0x00040000
+/* Don't block when waiting for memory allocations */
+#define UKW_TF_DONT_BLOCK_FOR_MEM 0x00080000
+
+/* Value to use when dealing with configuration values, such as UkwGetConfigDescriptor,
+ * to specify the currently active configuration for the device. */
+#define UKW_ACTIVE_CONFIGURATION -1
+
+DLL_DECLARE(WINAPI, HANDLE, UkwOpenDriver, ());
+DLL_DECLARE(WINAPI, BOOL, UkwGetDeviceList, (HANDLE, LPUKW_DEVICE, DWORD, LPDWORD));
+DLL_DECLARE(WINAPI, void, UkwReleaseDeviceList, (HANDLE, LPUKW_DEVICE, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwGetDeviceAddress, (UKW_DEVICE, unsigned char*, unsigned char*, unsigned long*));
+DLL_DECLARE(WINAPI, BOOL, UkwGetDeviceDescriptor, (UKW_DEVICE, LPUKW_DEVICE_DESCRIPTOR));
+DLL_DECLARE(WINAPI, BOOL, UkwGetConfigDescriptor, (UKW_DEVICE, DWORD, LPVOID, DWORD, LPDWORD));
+DLL_DECLARE(WINAPI, void, UkwCloseDriver, (HANDLE));
+DLL_DECLARE(WINAPI, BOOL, UkwCancelTransfer, (UKW_DEVICE, LPOVERLAPPED, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwIssueControlTransfer, (UKW_DEVICE, DWORD, LPUKW_CONTROL_HEADER, LPVOID, DWORD, LPDWORD, LPOVERLAPPED));
+DLL_DECLARE(WINAPI, BOOL, UkwClaimInterface, (UKW_DEVICE, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwReleaseInterface, (UKW_DEVICE, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwSetInterfaceAlternateSetting, (UKW_DEVICE, DWORD, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwClearHaltHost, (UKW_DEVICE, UCHAR));
+DLL_DECLARE(WINAPI, BOOL, UkwClearHaltDevice, (UKW_DEVICE, UCHAR));
+DLL_DECLARE(WINAPI, BOOL, UkwGetConfig, (UKW_DEVICE, PUCHAR));
+DLL_DECLARE(WINAPI, BOOL, UkwSetConfig, (UKW_DEVICE, UCHAR));
+DLL_DECLARE(WINAPI, BOOL, UkwResetDevice, (UKW_DEVICE));
+DLL_DECLARE(WINAPI, BOOL, UkwKernelDriverActive, (UKW_DEVICE, DWORD, PBOOL));
+DLL_DECLARE(WINAPI, BOOL, UkwAttachKernelDriver, (UKW_DEVICE, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwDetachKernelDriver, (UKW_DEVICE, DWORD));
+DLL_DECLARE(WINAPI, BOOL, UkwIssueBulkTransfer, (UKW_DEVICE, DWORD, UCHAR, LPVOID, DWORD, LPDWORD, LPOVERLAPPED));
+DLL_DECLARE(WINAPI, BOOL, UkwIsPipeHalted, (UKW_DEVICE, UCHAR, LPBOOL));
+
+// Used to determine if an endpoint status really is halted on a failed transfer.
+#define STATUS_HALT_FLAG 0x1
+
+struct wince_device_priv {
+ UKW_DEVICE dev;
+ UKW_DEVICE_DESCRIPTOR desc;
+};
+
+struct wince_device_handle_priv {
+ // This member isn't used, but only exists to avoid an empty structure
+ // for private data for the device handle.
+ int reserved;
+};
+
+struct wince_transfer_priv {
+ struct winfd pollable_fd;
+ uint8_t interface_number;
+};
+
--- /dev/null
+/*
+ * Windows backend common header for libusb 1.0
+ *
+ * This file brings together header code common between
+ * the desktop Windows and Windows CE backends.
+ * Copyright © 2012-2013 RealVNC Ltd.
+ * Copyright © 2009-2012 Pete Batard <pete@akeo.ie>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of this code adapted from libusb-win32-v1 by Stephan Meyer
+ * Major code testing contribution by Xiaofan Chen
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#pragma once
+
+// Windows API default is uppercase - ugh!
+#if !defined(bool)
+#define bool BOOL
+#endif
+#if !defined(true)
+#define true TRUE
+#endif
+#if !defined(false)
+#define false FALSE
+#endif
+
+#define safe_free(p) do {if (p != NULL) {free((void*)p); p = NULL;}} while(0)
+#define safe_closehandle(h) do {if (h != INVALID_HANDLE_VALUE) {CloseHandle(h); h = INVALID_HANDLE_VALUE;}} while(0)
+#define safe_min(a, b) MIN((size_t)(a), (size_t)(b))
+#define safe_strcp(dst, dst_max, src, count) do {memcpy(dst, src, safe_min(count, dst_max)); \
+ ((char*)dst)[safe_min(count, dst_max)-1] = 0;} while(0)
+#define safe_strcpy(dst, dst_max, src) safe_strcp(dst, dst_max, src, safe_strlen(src)+1)
+#define safe_strncat(dst, dst_max, src, count) strncat(dst, src, safe_min(count, dst_max - safe_strlen(dst) - 1))
+#define safe_strcat(dst, dst_max, src) safe_strncat(dst, dst_max, src, safe_strlen(src)+1)
+#define safe_strcmp(str1, str2) strcmp(((str1==NULL)?"<NULL>":str1), ((str2==NULL)?"<NULL>":str2))
+#define safe_stricmp(str1, str2) _stricmp(((str1==NULL)?"<NULL>":str1), ((str2==NULL)?"<NULL>":str2))
+#define safe_strncmp(str1, str2, count) strncmp(((str1==NULL)?"<NULL>":str1), ((str2==NULL)?"<NULL>":str2), count)
+#define safe_strlen(str) ((str==NULL)?0:strlen(str))
+#define safe_sprintf(dst, count, ...) do {_snprintf(dst, count, __VA_ARGS__); (dst)[(count)-1] = 0; } while(0)
+#define safe_stprintf _sntprintf
+#define safe_tcslen(str) ((str==NULL)?0:_tcslen(str))
+#define safe_unref_device(dev) do {if (dev != NULL) {libusb_unref_device(dev); dev = NULL;}} while(0)
+#define wchar_to_utf8_ms(wstr, str, strlen) WideCharToMultiByte(CP_UTF8, 0, wstr, -1, str, strlen, NULL, NULL)
+#ifndef ARRAYSIZE
+#define ARRAYSIZE(A) (sizeof(A)/sizeof((A)[0]))
+#endif
+
+#define ERR_BUFFER_SIZE 256
+#define TIMER_REQUEST_RETRY_MS 100
+#define MAX_TIMER_SEMAPHORES 128
+
+
+/*
+ * API macros - from libusb-win32 1.x
+ */
+#define DLL_DECLARE_PREFIXNAME(api, ret, prefixname, name, args) \
+ typedef ret (api * __dll_##name##_t)args; \
+ static __dll_##name##_t prefixname = NULL
+
+#ifndef _WIN32_WCE
+#define DLL_STRINGIFY(dll) #dll
+#define DLL_GET_MODULE_HANDLE(dll) GetModuleHandleA(DLL_STRINGIFY(dll))
+#define DLL_LOAD_LIBRARY(dll) LoadLibraryA(DLL_STRINGIFY(dll))
+#else
+#define DLL_STRINGIFY(dll) L#dll
+#define DLL_GET_MODULE_HANDLE(dll) GetModuleHandle(DLL_STRINGIFY(dll))
+#define DLL_LOAD_LIBRARY(dll) LoadLibrary(DLL_STRINGIFY(dll))
+#endif
+
+#define DLL_LOAD_PREFIXNAME(dll, prefixname, name, ret_on_failure) \
+ do { \
+ HMODULE h = DLL_GET_MODULE_HANDLE(dll); \
+ if (!h) \
+ h = DLL_LOAD_LIBRARY(dll); \
+ if (!h) { \
+ if (ret_on_failure) { return LIBUSB_ERROR_NOT_FOUND; } \
+ else { break; } \
+ } \
+ prefixname = (__dll_##name##_t)GetProcAddress(h, \
+ DLL_STRINGIFY(name)); \
+ if (prefixname) break; \
+ prefixname = (__dll_##name##_t)GetProcAddress(h, \
+ DLL_STRINGIFY(name) DLL_STRINGIFY(A)); \
+ if (prefixname) break; \
+ prefixname = (__dll_##name##_t)GetProcAddress(h, \
+ DLL_STRINGIFY(name) DLL_STRINGIFY(W)); \
+ if (prefixname) break; \
+ if(ret_on_failure) \
+ return LIBUSB_ERROR_NOT_FOUND; \
+ } while(0)
+
+#define DLL_DECLARE(api, ret, name, args) DLL_DECLARE_PREFIXNAME(api, ret, name, name, args)
+#define DLL_LOAD(dll, name, ret_on_failure) DLL_LOAD_PREFIXNAME(dll, name, name, ret_on_failure)
+#define DLL_DECLARE_PREFIXED(api, ret, prefix, name, args) DLL_DECLARE_PREFIXNAME(api, ret, prefix##name, name, args)
+#define DLL_LOAD_PREFIXED(dll, prefix, name, ret_on_failure) DLL_LOAD_PREFIXNAME(dll, prefix##name, name, ret_on_failure)
--- /dev/null
+/*
+ * windows backend for libusb 1.0
+ * Copyright © 2009-2012 Pete Batard <pete@akeo.ie>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of this code adapted from libusb-win32-v1 by Stephan Meyer
+ * HID Reports IOCTLs inspired from HIDAPI by Alan Ott, Signal 11 Software
+ * Hash table functions adapted from glibc, by Ulrich Drepper et al.
+ * Major code testing contribution by Xiaofan Chen
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <windows.h>
+#include <setupapi.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <process.h>
+#include <stdio.h>
+#include <inttypes.h>
+#include <objbase.h>
+#include <winioctl.h>
+
+#include "libusbi.h"
+#include "poll_windows.h"
+#include "windows_usb.h"
+
+// The 2 macros below are used in conjunction with safe loops.
+#define LOOP_CHECK(fcall) { r=fcall; if (r != LIBUSB_SUCCESS) continue; }
+#define LOOP_BREAK(err) { r=err; continue; }
+
+// Helper prototypes
+static int windows_get_active_config_descriptor(struct libusb_device *dev, unsigned char *buffer, size_t len, int *host_endian);
+static int windows_clock_gettime(int clk_id, struct timespec *tp);
+unsigned __stdcall windows_clock_gettime_threaded(void* param);
+// Common calls
+static int common_configure_endpoints(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+
+// WinUSB-like API prototypes
+static int winusbx_init(int sub_api, struct libusb_context *ctx);
+static int winusbx_exit(int sub_api);
+static int winusbx_open(int sub_api, struct libusb_device_handle *dev_handle);
+static void winusbx_close(int sub_api, struct libusb_device_handle *dev_handle);
+static int winusbx_configure_endpoints(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int winusbx_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int winusbx_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int winusbx_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int winusbx_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting);
+static int winusbx_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int winusbx_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint);
+static int winusbx_abort_transfers(int sub_api, struct usbi_transfer *itransfer);
+static int winusbx_abort_control(int sub_api, struct usbi_transfer *itransfer);
+static int winusbx_reset_device(int sub_api, struct libusb_device_handle *dev_handle);
+static int winusbx_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size);
+// HID API prototypes
+static int hid_init(int sub_api, struct libusb_context *ctx);
+static int hid_exit(int sub_api);
+static int hid_open(int sub_api, struct libusb_device_handle *dev_handle);
+static void hid_close(int sub_api, struct libusb_device_handle *dev_handle);
+static int hid_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int hid_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int hid_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting);
+static int hid_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int hid_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int hid_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint);
+static int hid_abort_transfers(int sub_api, struct usbi_transfer *itransfer);
+static int hid_reset_device(int sub_api, struct libusb_device_handle *dev_handle);
+static int hid_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size);
+// Composite API prototypes
+static int composite_init(int sub_api, struct libusb_context *ctx);
+static int composite_exit(int sub_api);
+static int composite_open(int sub_api, struct libusb_device_handle *dev_handle);
+static void composite_close(int sub_api, struct libusb_device_handle *dev_handle);
+static int composite_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int composite_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting);
+static int composite_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+static int composite_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int composite_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int composite_submit_iso_transfer(int sub_api, struct usbi_transfer *itransfer);
+static int composite_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint);
+static int composite_abort_transfers(int sub_api, struct usbi_transfer *itransfer);
+static int composite_abort_control(int sub_api, struct usbi_transfer *itransfer);
+static int composite_reset_device(int sub_api, struct libusb_device_handle *dev_handle);
+static int composite_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size);
+
+
+// Global variables
+uint64_t hires_frequency, hires_ticks_to_ps;
+const uint64_t epoch_time = UINT64_C(116444736000000000); // 1970.01.01 00:00:000 in MS Filetime
+int windows_version = WINDOWS_UNDEFINED;
+static char windows_version_str[128] = "Windows Undefined";
+// Concurrency
+static int concurrent_usage = -1;
+usbi_mutex_t autoclaim_lock;
+// Timer thread
+HANDLE timer_thread = NULL;
+DWORD timer_thread_id = 0;
+// API globals
+#define CHECK_WINUSBX_AVAILABLE(sub_api) do { if (sub_api == SUB_API_NOTSET) sub_api = priv->sub_api; \
+ if (!WinUSBX[sub_api].initialized) return LIBUSB_ERROR_ACCESS; } while(0)
+static struct winusb_interface WinUSBX[SUB_API_MAX];
+const char* sub_api_name[SUB_API_MAX] = WINUSBX_DRV_NAMES;
+bool api_hid_available = false;
+#define CHECK_HID_AVAILABLE do { if (!api_hid_available) return LIBUSB_ERROR_ACCESS; } while (0)
+
+static inline BOOLEAN guid_eq(const GUID *guid1, const GUID *guid2) {
+ if ((guid1 != NULL) && (guid2 != NULL)) {
+ return (memcmp(guid1, guid2, sizeof(GUID)) == 0);
+ }
+ return false;
+}
+
+#if defined(ENABLE_LOGGING)
+static char* guid_to_string(const GUID* guid)
+{
+ static char guid_string[MAX_GUID_STRING_LENGTH];
+
+ if (guid == NULL) return NULL;
+ sprintf(guid_string, "{%08X-%04X-%04X-%02X%02X-%02X%02X%02X%02X%02X%02X}",
+ (unsigned int)guid->Data1, guid->Data2, guid->Data3,
+ guid->Data4[0], guid->Data4[1], guid->Data4[2], guid->Data4[3],
+ guid->Data4[4], guid->Data4[5], guid->Data4[6], guid->Data4[7]);
+ return guid_string;
+}
+#endif
+
+/*
+ * Converts a windows error to human readable string
+ * uses retval as errorcode, or, if 0, use GetLastError()
+ */
+#if defined(ENABLE_LOGGING)
+static char *windows_error_str(uint32_t retval)
+{
+static char err_string[ERR_BUFFER_SIZE];
+
+ DWORD size;
+ ssize_t i;
+ uint32_t error_code, format_error;
+
+ error_code = retval?retval:GetLastError();
+
+ safe_sprintf(err_string, ERR_BUFFER_SIZE, "[%u] ", error_code);
+
+ // Translate codes returned by SetupAPI. The ones we are dealing with are either
+ // in 0x0000xxxx or 0xE000xxxx and can be distinguished from standard error codes.
+ // See http://msdn.microsoft.com/en-us/library/windows/hardware/ff545011.aspx
+ switch (error_code & 0xE0000000) {
+ case 0:
+ error_code = HRESULT_FROM_WIN32(error_code); // Still leaves ERROR_SUCCESS unmodified
+ break;
+ case 0xE0000000:
+ error_code = 0x80000000 | (FACILITY_SETUPAPI << 16) | (error_code & 0x0000FFFF);
+ break;
+ default:
+ break;
+ }
+
+ size = FormatMessageA(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error_code,
+ MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), &err_string[safe_strlen(err_string)],
+ ERR_BUFFER_SIZE - (DWORD)safe_strlen(err_string), NULL);
+ if (size == 0) {
+ format_error = GetLastError();
+ if (format_error)
+ safe_sprintf(err_string, ERR_BUFFER_SIZE,
+ "Windows error code %u (FormatMessage error code %u)", error_code, format_error);
+ else
+ safe_sprintf(err_string, ERR_BUFFER_SIZE, "Unknown error code %u", error_code);
+ } else {
+ // Remove CR/LF terminators
+ for (i=safe_strlen(err_string)-1; (i>=0) && ((err_string[i]==0x0A) || (err_string[i]==0x0D)); i--) {
+ err_string[i] = 0;
+ }
+ }
+ return err_string;
+}
+#endif
+
+/*
+ * Sanitize Microsoft's paths: convert to uppercase, add prefix and fix backslashes.
+ * Return an allocated sanitized string or NULL on error.
+ */
+static char* sanitize_path(const char* path)
+{
+ const char root_prefix[] = "\\\\.\\";
+ size_t j, size, root_size;
+ char* ret_path = NULL;
+ size_t add_root = 0;
+
+ if (path == NULL)
+ return NULL;
+
+ size = safe_strlen(path)+1;
+ root_size = sizeof(root_prefix)-1;
+
+ // Microsoft indiscriminately uses '\\?\', '\\.\', '##?#" or "##.#" for root prefixes.
+ if (!((size > 3) && (((path[0] == '\\') && (path[1] == '\\') && (path[3] == '\\')) ||
+ ((path[0] == '#') && (path[1] == '#') && (path[3] == '#'))))) {
+ add_root = root_size;
+ size += add_root;
+ }
+
+ if ((ret_path = (char*) calloc(size, 1)) == NULL)
+ return NULL;
+
+ safe_strcpy(&ret_path[add_root], size-add_root, path);
+
+ // Ensure consistency with root prefix
+ for (j=0; j<root_size; j++)
+ ret_path[j] = root_prefix[j];
+
+ // Same goes for '\' and '#' after the root prefix. Ensure '#' is used
+ for(j=root_size; j<size; j++) {
+ ret_path[j] = (char)toupper((int)ret_path[j]); // Fix case too
+ if (ret_path[j] == '\\')
+ ret_path[j] = '#';
+ }
+
+ return ret_path;
+}
+
+/*
+ * Cfgmgr32, OLE32 and SetupAPI DLL functions
+ */
+static int init_dlls(void)
+{
+ DLL_LOAD(Cfgmgr32.dll, CM_Get_Parent, TRUE);
+ DLL_LOAD(Cfgmgr32.dll, CM_Get_Child, TRUE);
+ DLL_LOAD(Cfgmgr32.dll, CM_Get_Sibling, TRUE);
+ DLL_LOAD(Cfgmgr32.dll, CM_Get_Device_IDA, TRUE);
+ // Prefixed to avoid conflict with header files
+ DLL_LOAD_PREFIXED(OLE32.dll, p, CLSIDFromString, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiGetClassDevsA, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiEnumDeviceInfo, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiEnumDeviceInterfaces, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiGetDeviceInterfaceDetailA, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiDestroyDeviceInfoList, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiOpenDevRegKey, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiGetDeviceRegistryPropertyA, TRUE);
+ DLL_LOAD_PREFIXED(SetupAPI.dll, p, SetupDiOpenDeviceInterfaceRegKey, TRUE);
+ DLL_LOAD_PREFIXED(AdvAPI32.dll, p, RegQueryValueExW, TRUE);
+ DLL_LOAD_PREFIXED(AdvAPI32.dll, p, RegCloseKey, TRUE);
+ DLL_LOAD_PREFIXED(User32.dll, p, GetMessageA, TRUE);
+ DLL_LOAD_PREFIXED(User32.dll, p, PeekMessageA, TRUE);
+ DLL_LOAD_PREFIXED(User32.dll, p, PostThreadMessageA, TRUE);
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * enumerate interfaces for the whole USB class
+ *
+ * Parameters:
+ * dev_info: a pointer to a dev_info list
+ * dev_info_data: a pointer to an SP_DEVINFO_DATA to be filled (or NULL if not needed)
+ * usb_class: the generic USB class for which to retrieve interface details
+ * index: zero based index of the interface in the device info list
+ *
+ * Note: it is the responsibility of the caller to free the DEVICE_INTERFACE_DETAIL_DATA
+ * structure returned and call this function repeatedly using the same guid (with an
+ * incremented index starting at zero) until all interfaces have been returned.
+ */
+static bool get_devinfo_data(struct libusb_context *ctx,
+ HDEVINFO *dev_info, SP_DEVINFO_DATA *dev_info_data, const char* usb_class, unsigned _index)
+{
+ if (_index <= 0) {
+ *dev_info = pSetupDiGetClassDevsA(NULL, usb_class, NULL, DIGCF_PRESENT|DIGCF_ALLCLASSES);
+ if (*dev_info == INVALID_HANDLE_VALUE) {
+ return false;
+ }
+ }
+
+ dev_info_data->cbSize = sizeof(SP_DEVINFO_DATA);
+ if (!pSetupDiEnumDeviceInfo(*dev_info, _index, dev_info_data)) {
+ if (GetLastError() != ERROR_NO_MORE_ITEMS) {
+ usbi_err(ctx, "Could not obtain device info data for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return false;
+ }
+ return true;
+}
+
+/*
+ * enumerate interfaces for a specific GUID
+ *
+ * Parameters:
+ * dev_info: a pointer to a dev_info list
+ * dev_info_data: a pointer to an SP_DEVINFO_DATA to be filled (or NULL if not needed)
+ * guid: the GUID for which to retrieve interface details
+ * index: zero based index of the interface in the device info list
+ *
+ * Note: it is the responsibility of the caller to free the DEVICE_INTERFACE_DETAIL_DATA
+ * structure returned and call this function repeatedly using the same guid (with an
+ * incremented index starting at zero) until all interfaces have been returned.
+ */
+static SP_DEVICE_INTERFACE_DETAIL_DATA_A *get_interface_details(struct libusb_context *ctx,
+ HDEVINFO *dev_info, SP_DEVINFO_DATA *dev_info_data, const GUID* guid, unsigned _index)
+{
+ SP_DEVICE_INTERFACE_DATA dev_interface_data;
+ SP_DEVICE_INTERFACE_DETAIL_DATA_A *dev_interface_details = NULL;
+ DWORD size;
+
+ if (_index <= 0) {
+ *dev_info = pSetupDiGetClassDevsA(guid, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
+ }
+
+ if (dev_info_data != NULL) {
+ dev_info_data->cbSize = sizeof(SP_DEVINFO_DATA);
+ if (!pSetupDiEnumDeviceInfo(*dev_info, _index, dev_info_data)) {
+ if (GetLastError() != ERROR_NO_MORE_ITEMS) {
+ usbi_err(ctx, "Could not obtain device info data for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;
+ }
+ }
+
+ dev_interface_data.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA);
+ if (!pSetupDiEnumDeviceInterfaces(*dev_info, NULL, guid, _index, &dev_interface_data)) {
+ if (GetLastError() != ERROR_NO_MORE_ITEMS) {
+ usbi_err(ctx, "Could not obtain interface data for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;
+ }
+
+ // Read interface data (dummy + actual) to access the device path
+ if (!pSetupDiGetDeviceInterfaceDetailA(*dev_info, &dev_interface_data, NULL, 0, &size, NULL)) {
+ // The dummy call should fail with ERROR_INSUFFICIENT_BUFFER
+ if (GetLastError() != ERROR_INSUFFICIENT_BUFFER) {
+ usbi_err(ctx, "could not access interface data (dummy) for index %u: %s",
+ _index, windows_error_str(0));
+ goto err_exit;
+ }
+ } else {
+ usbi_err(ctx, "program assertion failed - http://msdn.microsoft.com/en-us/library/ms792901.aspx is wrong.");
+ goto err_exit;
+ }
+
+ if ((dev_interface_details = (SP_DEVICE_INTERFACE_DETAIL_DATA_A*) calloc(size, 1)) == NULL) {
+ usbi_err(ctx, "could not allocate interface data for index %u.", _index);
+ goto err_exit;
+ }
+
+ dev_interface_details->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
+ if (!pSetupDiGetDeviceInterfaceDetailA(*dev_info, &dev_interface_data,
+ dev_interface_details, size, &size, NULL)) {
+ usbi_err(ctx, "could not access interface data (actual) for index %u: %s",
+ _index, windows_error_str(0));
+ }
+
+ return dev_interface_details;
+
+err_exit:
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;
+}
+
+/* For libusb0 filter */
+static SP_DEVICE_INTERFACE_DETAIL_DATA_A *get_interface_details_filter(struct libusb_context *ctx,
+ HDEVINFO *dev_info, SP_DEVINFO_DATA *dev_info_data, const GUID* guid, unsigned _index, char* filter_path){
+ SP_DEVICE_INTERFACE_DATA dev_interface_data;
+ SP_DEVICE_INTERFACE_DETAIL_DATA_A *dev_interface_details = NULL;
+ DWORD size;
+ if (_index <= 0) {
+ *dev_info = pSetupDiGetClassDevsA(guid, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
+ }
+ if (dev_info_data != NULL) {
+ dev_info_data->cbSize = sizeof(SP_DEVINFO_DATA);
+ if (!pSetupDiEnumDeviceInfo(*dev_info, _index, dev_info_data)) {
+ if (GetLastError() != ERROR_NO_MORE_ITEMS) {
+ usbi_err(ctx, "Could not obtain device info data for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;
+ }
+ }
+ dev_interface_data.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA);
+ if (!pSetupDiEnumDeviceInterfaces(*dev_info, NULL, guid, _index, &dev_interface_data)) {
+ if (GetLastError() != ERROR_NO_MORE_ITEMS) {
+ usbi_err(ctx, "Could not obtain interface data for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;
+ }
+ // Read interface data (dummy + actual) to access the device path
+ if (!pSetupDiGetDeviceInterfaceDetailA(*dev_info, &dev_interface_data, NULL, 0, &size, NULL)) {
+ // The dummy call should fail with ERROR_INSUFFICIENT_BUFFER
+ if (GetLastError() != ERROR_INSUFFICIENT_BUFFER) {
+ usbi_err(ctx, "could not access interface data (dummy) for index %u: %s",
+ _index, windows_error_str(0));
+ goto err_exit;
+ }
+ } else {
+ usbi_err(ctx, "program assertion failed - http://msdn.microsoft.com/en-us/library/ms792901.aspx is wrong.");
+ goto err_exit;
+ }
+ if ((dev_interface_details = malloc(size)) == NULL) {
+ usbi_err(ctx, "could not allocate interface data for index %u.", _index);
+ goto err_exit;
+ }
+ dev_interface_details->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
+ if (!pSetupDiGetDeviceInterfaceDetailA(*dev_info, &dev_interface_data,
+ dev_interface_details, size, &size, NULL)) {
+ usbi_err(ctx, "could not access interface data (actual) for index %u: %s",
+ _index, windows_error_str(0));
+ }
+ // [trobinso] lookup the libusb0 symbolic index.
+ if (dev_interface_details) {
+ HKEY hkey_device_interface=pSetupDiOpenDeviceInterfaceRegKey(*dev_info,&dev_interface_data,0,KEY_READ);
+ if (hkey_device_interface != INVALID_HANDLE_VALUE) {
+ DWORD libusb0_symboliclink_index=0;
+ DWORD value_length=sizeof(DWORD);
+ DWORD value_type=0;
+ LONG status;
+ status = pRegQueryValueExW(hkey_device_interface, L"LUsb0", NULL, &value_type,
+ (LPBYTE) &libusb0_symboliclink_index, &value_length);
+ if (status == ERROR_SUCCESS) {
+ if (libusb0_symboliclink_index < 256) {
+ // libusb0.sys is connected to this device instance.
+ // If the the device interface guid is {F9F3FF14-AE21-48A0-8A25-8011A7A931D9} then it's a filter.
+ safe_sprintf(filter_path, sizeof("\\\\.\\libusb0-0000"), "\\\\.\\libusb0-%04d", libusb0_symboliclink_index);
+ usbi_dbg("assigned libusb0 symbolic link %s", filter_path);
+ } else {
+ // libusb0.sys was connected to this device instance at one time; but not anymore.
+ }
+ }
+ pRegCloseKey(hkey_device_interface);
+ }
+ }
+ return dev_interface_details;
+err_exit:
+ pSetupDiDestroyDeviceInfoList(*dev_info);
+ *dev_info = INVALID_HANDLE_VALUE;
+ return NULL;}
+
+/* Hash table functions - modified From glibc 2.3.2:
+ [Aho,Sethi,Ullman] Compilers: Principles, Techniques and Tools, 1986
+ [Knuth] The Art of Computer Programming, part 3 (6.4) */
+typedef struct htab_entry {
+ unsigned long used;
+ char* str;
+} htab_entry;
+htab_entry* htab_table = NULL;
+usbi_mutex_t htab_write_mutex = NULL;
+unsigned long htab_size, htab_filled;
+
+/* For the used double hash method the table size has to be a prime. To
+ correct the user given table size we need a prime test. This trivial
+ algorithm is adequate because the code is called only during init and
+ the number is likely to be small */
+static int isprime(unsigned long number)
+{
+ // no even number will be passed
+ unsigned int divider = 3;
+
+ while((divider * divider < number) && (number % divider != 0))
+ divider += 2;
+
+ return (number % divider != 0);
+}
+
+/* Before using the hash table we must allocate memory for it.
+ We allocate one element more as the found prime number says.
+ This is done for more effective indexing as explained in the
+ comment for the hash function. */
+static int htab_create(struct libusb_context *ctx, unsigned long nel)
+{
+ if (htab_table != NULL) {
+ usbi_err(ctx, "hash table already allocated");
+ }
+
+ // Create a mutex
+ usbi_mutex_init(&htab_write_mutex, NULL);
+
+ // Change nel to the first prime number not smaller as nel.
+ nel |= 1;
+ while(!isprime(nel))
+ nel += 2;
+
+ htab_size = nel;
+ usbi_dbg("using %d entries hash table", nel);
+ htab_filled = 0;
+
+ // allocate memory and zero out.
+ htab_table = (htab_entry*) calloc(htab_size + 1, sizeof(htab_entry));
+ if (htab_table == NULL) {
+ usbi_err(ctx, "could not allocate space for hash table");
+ return 0;
+ }
+
+ return 1;
+}
+
+/* After using the hash table it has to be destroyed. */
+static void htab_destroy(void)
+{
+ size_t i;
+ if (htab_table == NULL) {
+ return;
+ }
+
+ for (i=0; i<htab_size; i++) {
+ if (htab_table[i].used) {
+ safe_free(htab_table[i].str);
+ }
+ }
+ usbi_mutex_destroy(&htab_write_mutex);
+ safe_free(htab_table);
+}
+
+/* This is the search function. It uses double hashing with open addressing.
+ We use an trick to speed up the lookup. The table is created with one
+ more element available. This enables us to use the index zero special.
+ This index will never be used because we store the first hash index in
+ the field used where zero means not used. Every other value means used.
+ The used field can be used as a first fast comparison for equality of
+ the stored and the parameter value. This helps to prevent unnecessary
+ expensive calls of strcmp. */
+static unsigned long htab_hash(char* str)
+{
+ unsigned long hval, hval2;
+ unsigned long idx;
+ unsigned long r = 5381;
+ int c;
+ char* sz = str;
+
+ if (str == NULL)
+ return 0;
+
+ // Compute main hash value (algorithm suggested by Nokia)
+ while ((c = *sz++) != 0)
+ r = ((r << 5) + r) + c;
+ if (r == 0)
+ ++r;
+
+ // compute table hash: simply take the modulus
+ hval = r % htab_size;
+ if (hval == 0)
+ ++hval;
+
+ // Try the first index
+ idx = hval;
+
+ if (htab_table[idx].used) {
+ if ( (htab_table[idx].used == hval)
+ && (safe_strcmp(str, htab_table[idx].str) == 0) ) {
+ // existing hash
+ return idx;
+ }
+ usbi_dbg("hash collision ('%s' vs '%s')", str, htab_table[idx].str);
+
+ // Second hash function, as suggested in [Knuth]
+ hval2 = 1 + hval % (htab_size - 2);
+
+ do {
+ // Because size is prime this guarantees to step through all available indexes
+ if (idx <= hval2) {
+ idx = htab_size + idx - hval2;
+ } else {
+ idx -= hval2;
+ }
+
+ // If we visited all entries leave the loop unsuccessfully
+ if (idx == hval) {
+ break;
+ }
+
+ // If entry is found use it.
+ if ( (htab_table[idx].used == hval)
+ && (safe_strcmp(str, htab_table[idx].str) == 0) ) {
+ return idx;
+ }
+ }
+ while (htab_table[idx].used);
+ }
+
+ // Not found => New entry
+
+ // If the table is full return an error
+ if (htab_filled >= htab_size) {
+ usbi_err(NULL, "hash table is full (%d entries)", htab_size);
+ return 0;
+ }
+
+ // Concurrent threads might be storing the same entry at the same time
+ // (eg. "simultaneous" enums from different threads) => use a mutex
+ usbi_mutex_lock(&htab_write_mutex);
+ // Just free any previously allocated string (which should be the same as
+ // new one). The possibility of concurrent threads storing a collision
+ // string (same hash, different string) at the same time is extremely low
+ safe_free(htab_table[idx].str);
+ htab_table[idx].used = hval;
+ htab_table[idx].str = (char*) malloc(safe_strlen(str)+1);
+ if (htab_table[idx].str == NULL) {
+ usbi_err(NULL, "could not duplicate string for hash table");
+ usbi_mutex_unlock(&htab_write_mutex);
+ return 0;
+ }
+ memcpy(htab_table[idx].str, str, safe_strlen(str)+1);
+ ++htab_filled;
+ usbi_mutex_unlock(&htab_write_mutex);
+
+ return idx;
+}
+
+/*
+ * Returns the session ID of a device's nth level ancestor
+ * If there's no device at the nth level, return 0
+ */
+static unsigned long get_ancestor_session_id(DWORD devinst, unsigned level)
+{
+ DWORD parent_devinst;
+ unsigned long session_id = 0;
+ char* sanitized_path = NULL;
+ char path[MAX_PATH_LENGTH];
+ unsigned i;
+
+ if (level < 1) return 0;
+ for (i = 0; i<level; i++) {
+ if (CM_Get_Parent(&parent_devinst, devinst, 0) != CR_SUCCESS) {
+ return 0;
+ }
+ devinst = parent_devinst;
+ }
+ if (CM_Get_Device_IDA(devinst, path, MAX_PATH_LENGTH, 0) != CR_SUCCESS) {
+ return 0;
+ }
+ // TODO: (post hotplug): try without sanitizing
+ sanitized_path = sanitize_path(path);
+ if (sanitized_path == NULL) {
+ return 0;
+ }
+ session_id = htab_hash(sanitized_path);
+ safe_free(sanitized_path);
+ return session_id;
+}
+
+/*
+ * Determine which interface the given endpoint address belongs to
+ */
+static int get_interface_by_endpoint(struct libusb_config_descriptor *conf_desc, uint8_t ep)
+{
+ const struct libusb_interface *intf;
+ const struct libusb_interface_descriptor *intf_desc;
+ int i, j, k;
+
+ for (i = 0; i < conf_desc->bNumInterfaces; i++) {
+ intf = &conf_desc->interface[i];
+ for (j = 0; j < intf->num_altsetting; j++) {
+ intf_desc = &intf->altsetting[j];
+ for (k = 0; k < intf_desc->bNumEndpoints; k++) {
+ if (intf_desc->endpoint[k].bEndpointAddress == ep) {
+ usbi_dbg("found endpoint %02X on interface %d", intf_desc->bInterfaceNumber);
+ return intf_desc->bInterfaceNumber;
+ }
+ }
+ }
+ }
+
+ usbi_dbg("endpoint %02X not found on any interface", ep);
+ return LIBUSB_ERROR_NOT_FOUND;
+}
+
+/*
+ * Populate the endpoints addresses of the device_priv interface helper structs
+ */
+static int windows_assign_endpoints(struct libusb_device_handle *dev_handle, int iface, int altsetting)
+{
+ int i, r;
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct libusb_config_descriptor *conf_desc;
+ const struct libusb_interface_descriptor *if_desc;
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+
+ r = libusb_get_config_descriptor(dev_handle->dev, (uint8_t)(priv->active_config-1), &conf_desc);
+ if (r != LIBUSB_SUCCESS) {
+ usbi_warn(ctx, "could not read config descriptor: error %d", r);
+ return r;
+ }
+
+ if_desc = &conf_desc->interface[iface].altsetting[altsetting];
+ safe_free(priv->usb_interface[iface].endpoint);
+
+ if (if_desc->bNumEndpoints == 0) {
+ usbi_dbg("no endpoints found for interface %d", iface);
+ return LIBUSB_SUCCESS;
+ }
+
+ priv->usb_interface[iface].endpoint = (uint8_t*) malloc(if_desc->bNumEndpoints);
+ if (priv->usb_interface[iface].endpoint == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ priv->usb_interface[iface].nb_endpoints = if_desc->bNumEndpoints;
+ for (i=0; i<if_desc->bNumEndpoints; i++) {
+ priv->usb_interface[iface].endpoint[i] = if_desc->endpoint[i].bEndpointAddress;
+ usbi_dbg("(re)assigned endpoint %02X to interface %d", priv->usb_interface[iface].endpoint[i], iface);
+ }
+ libusb_free_config_descriptor(conf_desc);
+
+ // Extra init may be required to configure endpoints
+ return priv->apib->configure_endpoints(SUB_API_NOTSET, dev_handle, iface);
+}
+
+// Lookup for a match in the list of API driver names
+// return -1 if not found, driver match number otherwise
+static int get_sub_api(char* driver, int api){
+ int i;
+ const char sep_str[2] = {LIST_SEPARATOR, 0};
+ char *tok, *tmp_str;
+ size_t len = safe_strlen(driver);
+
+ if (len == 0) return SUB_API_NOTSET;
+ tmp_str = (char*) calloc(len+1, 1);
+ if (tmp_str == NULL) return SUB_API_NOTSET;
+ memcpy(tmp_str, driver, len+1);
+ tok = strtok(tmp_str, sep_str);
+ while (tok != NULL) {
+ for (i=0; i<usb_api_backend[api].nb_driver_names; i++) {
+ if (safe_stricmp(tok, usb_api_backend[api].driver_name_list[i]) == 0) {
+ free(tmp_str);
+ return i;
+ }
+ }
+ tok = strtok(NULL, sep_str);
+ }
+ free (tmp_str);
+ return SUB_API_NOTSET;
+}
+
+/*
+ * auto-claiming and auto-release helper functions
+ */
+static int auto_claim(struct libusb_transfer *transfer, int *interface_number, int api_type)
+{
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(
+ transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int current_interface = *interface_number;
+ int r = LIBUSB_SUCCESS;
+
+ switch(api_type) {
+ case USB_API_WINUSBX:
+ case USB_API_HID:
+ break;
+ default:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ usbi_mutex_lock(&autoclaim_lock);
+ if (current_interface < 0) // No serviceable interface was found
+ {
+ for (current_interface=0; current_interface<USB_MAXINTERFACES; current_interface++) {
+ // Must claim an interface of the same API type
+ if ( (priv->usb_interface[current_interface].apib->id == api_type)
+ && (libusb_claim_interface(transfer->dev_handle, current_interface) == LIBUSB_SUCCESS) ) {
+ usbi_dbg("auto-claimed interface %d for control request", current_interface);
+ if (handle_priv->autoclaim_count[current_interface] != 0) {
+ usbi_warn(ctx, "program assertion failed - autoclaim_count was nonzero");
+ }
+ handle_priv->autoclaim_count[current_interface]++;
+ break;
+ }
+ }
+ if (current_interface == USB_MAXINTERFACES) {
+ usbi_err(ctx, "could not auto-claim any interface");
+ r = LIBUSB_ERROR_NOT_FOUND;
+ }
+ } else {
+ // If we have a valid interface that was autoclaimed, we must increment
+ // its autoclaim count so that we can prevent an early release.
+ if (handle_priv->autoclaim_count[current_interface] != 0) {
+ handle_priv->autoclaim_count[current_interface]++;
+ }
+ }
+ usbi_mutex_unlock(&autoclaim_lock);
+
+ *interface_number = current_interface;
+ return r;
+
+}
+
+static void auto_release(struct usbi_transfer *itransfer)
+{
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ libusb_device_handle *dev_handle = transfer->dev_handle;
+ struct windows_device_handle_priv* handle_priv = _device_handle_priv(dev_handle);
+ int r;
+
+ usbi_mutex_lock(&autoclaim_lock);
+ if (handle_priv->autoclaim_count[transfer_priv->interface_number] > 0) {
+ handle_priv->autoclaim_count[transfer_priv->interface_number]--;
+ if (handle_priv->autoclaim_count[transfer_priv->interface_number] == 0) {
+ r = libusb_release_interface(dev_handle, transfer_priv->interface_number);
+ if (r == LIBUSB_SUCCESS) {
+ usbi_dbg("auto-released interface %d", transfer_priv->interface_number);
+ } else {
+ usbi_dbg("failed to auto-release interface %d (%s)",
+ transfer_priv->interface_number, libusb_error_name((enum libusb_error)r));
+ }
+ }
+ }
+ usbi_mutex_unlock(&autoclaim_lock);
+}
+
+/* Windows version dtection */
+static BOOL is_x64(void)
+{
+ BOOL ret = FALSE;
+ // Detect if we're running a 32 or 64 bit system
+ if (sizeof(uintptr_t) < 8) {
+ DLL_LOAD_PREFIXED(Kernel32.dll, p, IsWow64Process, FALSE);
+ if (pIsWow64Process != NULL) {
+ (*pIsWow64Process)(GetCurrentProcess(), &ret);
+ }
+ } else {
+ ret = TRUE;
+ }
+ return ret;
+}
+
+static void get_windows_version(void)
+{
+ OSVERSIONINFOEXA vi, vi2;
+ const char* w = 0;
+ const char* w64 = "32 bit";
+ char* vptr;
+ size_t vlen;
+ unsigned major, minor;
+ ULONGLONG major_equal, minor_equal;
+ BOOL ws;
+
+ memset(&vi, 0, sizeof(vi));
+ vi.dwOSVersionInfoSize = sizeof(vi);
+ if (!GetVersionExA((OSVERSIONINFOA *)&vi)) {
+ memset(&vi, 0, sizeof(vi));
+ vi.dwOSVersionInfoSize = sizeof(OSVERSIONINFOA);
+ if (!GetVersionExA((OSVERSIONINFOA *)&vi))
+ return;
+ }
+
+ if (vi.dwPlatformId == VER_PLATFORM_WIN32_NT) {
+
+ if (vi.dwMajorVersion > 6 || (vi.dwMajorVersion == 6 && vi.dwMinorVersion >= 2)) {
+ // Starting with Windows 8.1 Preview, GetVersionEx() does no longer report the actual OS version
+ // See: http://msdn.microsoft.com/en-us/library/windows/desktop/dn302074.aspx
+
+ major_equal = VerSetConditionMask(0, VER_MAJORVERSION, VER_EQUAL);
+ for (major = vi.dwMajorVersion; major <= 9; major++) {
+ memset(&vi2, 0, sizeof(vi2));
+ vi2.dwOSVersionInfoSize = sizeof(vi2); vi2.dwMajorVersion = major;
+ if (!VerifyVersionInfoA(&vi2, VER_MAJORVERSION, major_equal))
+ continue;
+ if (vi.dwMajorVersion < major) {
+ vi.dwMajorVersion = major; vi.dwMinorVersion = 0;
+ }
+
+ minor_equal = VerSetConditionMask(0, VER_MINORVERSION, VER_EQUAL);
+ for (minor = vi.dwMinorVersion; minor <= 9; minor++) {
+ memset(&vi2, 0, sizeof(vi2)); vi2.dwOSVersionInfoSize = sizeof(vi2);
+ vi2.dwMinorVersion = minor;
+ if (!VerifyVersionInfoA(&vi2, VER_MINORVERSION, minor_equal))
+ continue;
+ vi.dwMinorVersion = minor;
+ break;
+ }
+
+ break;
+ }
+ }
+
+ if (vi.dwMajorVersion <= 0xf && vi.dwMinorVersion <= 0xf) {
+ ws = (vi.wProductType <= VER_NT_WORKSTATION);
+ windows_version = vi.dwMajorVersion << 4 | vi.dwMinorVersion;
+ switch (windows_version) {
+ case 0x50: w = "2000";
+ break;
+ case 0x51: w = "XP";
+ break;
+ case 0x52: w = ("2003");
+ break;
+ case 0x60: w = (ws?"Vista":"2008");
+ break;
+ case 0x61: w = (ws?"7":"2008_R2");
+ break;
+ case 0x62: w = (ws?"8":"2012");
+ break;
+ case 0x63: w = (ws?"8.1":"2012_R2");
+ break;
+ case 0x64: w = (ws?"10":"2015");
+ break;
+ default:
+ if (windows_version < 0x50)
+ windows_version = WINDOWS_UNSUPPORTED;
+ else
+ w = "11 or later";
+ break;
+ }
+ }
+ }
+
+ if (is_x64())
+ w64 = "64-bit";
+
+ vptr = &windows_version_str[sizeof("Windows ") - 1];
+ vlen = sizeof(windows_version_str) - sizeof("Windows ") - 1;
+ if (!w)
+ safe_sprintf(vptr, vlen, "%s %u.%u %s", (vi.dwPlatformId==VER_PLATFORM_WIN32_NT?"NT":"??"),
+ (unsigned)vi.dwMajorVersion, (unsigned)vi.dwMinorVersion, w64);
+ else if (vi.wServicePackMinor)
+ safe_sprintf(vptr, vlen, "%s SP%u.%u %s", w, vi.wServicePackMajor, vi.wServicePackMinor, w64);
+ else if (vi.wServicePackMajor)
+ safe_sprintf(vptr, vlen, "%s SP%u %s", w, vi.wServicePackMajor, w64);
+ else
+ safe_sprintf(vptr, vlen, "%s %s", w, w64);
+}
+
+/*
+ * init: libusb backend init function
+ *
+ * This function enumerates the HCDs (Host Controller Drivers) and populates our private HCD list
+ * In our implementation, we equate Windows' "HCD" to libusb's "bus". Note that bus is zero indexed.
+ * HCDs are not expected to change after init (might not hold true for hot pluggable USB PCI card?)
+ */
+static int windows_init(struct libusb_context *ctx)
+{
+ int i, r = LIBUSB_ERROR_OTHER;
+ DWORD_PTR affinity, dummy;
+ HANDLE event = NULL;
+ HANDLE semaphore;
+ LARGE_INTEGER li_frequency;
+ char sem_name[11+1+8]; // strlen(libusb_init)+'\0'+(32-bit hex PID)
+
+ sprintf(sem_name, "libusb_init%08X", (unsigned int)GetCurrentProcessId()&0xFFFFFFFF);
+ semaphore = CreateSemaphoreA(NULL, 1, 1, sem_name);
+ if (semaphore == NULL) {
+ usbi_err(ctx, "could not create semaphore: %s", windows_error_str(0));
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // A successful wait brings our semaphore count to 0 (unsignaled)
+ // => any concurent wait stalls until the semaphore's release
+ if (WaitForSingleObject(semaphore, INFINITE) != WAIT_OBJECT_0) {
+ usbi_err(ctx, "failure to access semaphore: %s", windows_error_str(0));
+ CloseHandle(semaphore);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // NB: concurrent usage supposes that init calls are equally balanced with
+ // exit calls. If init is called more than exit, we will not exit properly
+ if ( ++concurrent_usage == 0 ) { // First init?
+ get_windows_version();
+ usbi_dbg(windows_version_str);
+ if (windows_version == WINDOWS_UNSUPPORTED) {
+ usbi_err(ctx, "This version of Windows is NOT supported");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ goto init_exit;
+ }
+
+ // We need a lock for proper auto-release
+ usbi_mutex_init(&autoclaim_lock, NULL);
+
+ // Initialize pollable file descriptors
+ init_polling();
+
+ // Load DLL imports
+ if (init_dlls() != LIBUSB_SUCCESS) {
+ usbi_err(ctx, "could not resolve DLL functions");
+ goto init_exit;
+ }
+
+ // Initialize the low level APIs (we don't care about errors at this stage)
+ for (i=0; i<USB_API_MAX; i++) {
+ usb_api_backend[i].init(SUB_API_NOTSET, ctx);
+ }
+
+ if (QueryPerformanceFrequency(&li_frequency)) {
+ // The hires frequency can go as high as 4 GHz, so we'll use a conversion
+ // to picoseconds to compute the tv_nsecs part in clock_gettime
+ hires_frequency = li_frequency.QuadPart;
+ hires_ticks_to_ps = UINT64_C(1000000000000) / hires_frequency;
+ usbi_dbg("hires timer available (Frequency: %"PRIu64" Hz)", hires_frequency);
+
+ // Because QueryPerformanceCounter might report different values when
+ // running on different cores, we create a separate thread for the timer
+ // calls, which we glue to the first available core always to prevent timing discrepancies.
+ if (!GetProcessAffinityMask(GetCurrentProcess(), &affinity, &dummy) || (affinity == 0)) {
+ usbi_err(ctx, "could not get process affinity: %s", windows_error_str(0));
+ goto init_exit;
+ }
+ // The process affinity mask is a bitmask where each set bit represents a core on
+ // which this process is allowed to run, so we find the first set bit
+ for (i = 0; !(affinity & (DWORD_PTR)(1 << i)); i++);
+ affinity = (DWORD_PTR)(1 << i);
+
+ usbi_dbg("timer thread will run on core #%d", i);
+
+ r = LIBUSB_ERROR_NO_MEM;
+ event = CreateEvent(NULL, FALSE, FALSE, NULL);
+ if (event == NULL) {
+ usbi_err(ctx, "could not create event: %s", windows_error_str(0));
+ goto init_exit;
+ }
+ timer_thread = (HANDLE)_beginthreadex(NULL, 0, windows_clock_gettime_threaded, (void *)event,
+ 0, (unsigned int *)&timer_thread_id);
+ if (timer_thread == NULL) {
+ usbi_err(ctx, "unable to create timer thread - aborting");
+ goto init_exit;
+ }
+ if (!SetThreadAffinityMask(timer_thread, affinity)) {
+ usbi_warn(ctx, "unable to set timer thread affinity, timer discrepancies may arise");
+ }
+
+ // Wait for timer thread to init before continuing.
+ if (WaitForSingleObject(event, INFINITE) != WAIT_OBJECT_0) {
+ usbi_err(ctx, "failed to wait for timer thread to become ready - aborting");
+ goto init_exit;
+ }
+ }
+ else {
+ usbi_dbg("no hires timer available on this platform");
+ hires_frequency = 0;
+ hires_ticks_to_ps = UINT64_C(0);
+ }
+
+ // Create a hash table to store session ids. Second parameter is better if prime
+ htab_create(ctx, HTAB_SIZE);
+ }
+ // At this stage, either we went through full init successfully, or didn't need to
+ r = LIBUSB_SUCCESS;
+
+init_exit: // Holds semaphore here.
+ if (!concurrent_usage && r != LIBUSB_SUCCESS) { // First init failed?
+ if (timer_thread) {
+ // actually the signal to quit the thread.
+ if (!pPostThreadMessageA(timer_thread_id, WM_TIMER_EXIT, 0, 0) ||
+ (WaitForSingleObject(timer_thread, INFINITE) != WAIT_OBJECT_0)) {
+ usbi_warn(ctx, "could not wait for timer thread to quit");
+ TerminateThread(timer_thread, 1);
+ // shouldn't happen, but we're destroying
+ // all objects it might have held anyway.
+ }
+ CloseHandle(timer_thread);
+ timer_thread = NULL;
+ timer_thread_id = 0;
+ }
+ htab_destroy();
+ usbi_mutex_destroy(&autoclaim_lock);
+ }
+
+ if (r != LIBUSB_SUCCESS)
+ --concurrent_usage; // Not expected to call libusb_exit if we failed.
+
+ if (event)
+ CloseHandle(event);
+ ReleaseSemaphore(semaphore, 1, NULL); // increase count back to 1
+ CloseHandle(semaphore);
+ return r;
+}
+
+/*
+ * HCD (root) hubs need to have their device descriptor manually populated
+ *
+ * Note that, like Microsoft does in the device manager, we populate the
+ * Vendor and Device ID for HCD hubs with the ones from the PCI HCD device.
+ */
+static int force_hcd_device_descriptor(struct libusb_device *dev)
+{
+ struct windows_device_priv *parent_priv, *priv = _device_priv(dev);
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ int vid, pid;
+
+ dev->num_configurations = 1;
+ priv->dev_descriptor.bLength = sizeof(USB_DEVICE_DESCRIPTOR);
+ priv->dev_descriptor.bDescriptorType = USB_DEVICE_DESCRIPTOR_TYPE;
+ priv->dev_descriptor.bNumConfigurations = 1;
+ priv->active_config = 1;
+
+ if (priv->parent_dev == NULL) {
+ usbi_err(ctx, "program assertion failed - HCD hub has no parent");
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ parent_priv = _device_priv(priv->parent_dev);
+ if (sscanf(parent_priv->path, "\\\\.\\PCI#VEN_%04x&DEV_%04x%*s", &vid, &pid) == 2) {
+ priv->dev_descriptor.idVendor = (uint16_t)vid;
+ priv->dev_descriptor.idProduct = (uint16_t)pid;
+ } else {
+ usbi_warn(ctx, "could not infer VID/PID of HCD hub from '%s'", parent_priv->path);
+ priv->dev_descriptor.idVendor = 0x1d6b; // Linux Foundation root hub
+ priv->dev_descriptor.idProduct = 1;
+ }
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * fetch and cache all the config descriptors through I/O
+ */
+static int cache_config_descriptors(struct libusb_device *dev, HANDLE hub_handle, char* device_id)
+{
+ DWORD size, ret_size;
+ struct libusb_context *ctx = DEVICE_CTX(dev);
+ struct windows_device_priv *priv = _device_priv(dev);
+ int r;
+ uint8_t i;
+
+ USB_CONFIGURATION_DESCRIPTOR_SHORT cd_buf_short; // dummy request
+ PUSB_DESCRIPTOR_REQUEST cd_buf_actual = NULL; // actual request
+ PUSB_CONFIGURATION_DESCRIPTOR cd_data = NULL;
+
+ if (dev->num_configurations == 0)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ priv->config_descriptor = (unsigned char**) calloc(dev->num_configurations, sizeof(unsigned char*));
+ if (priv->config_descriptor == NULL)
+ return LIBUSB_ERROR_NO_MEM;
+ for (i=0; i<dev->num_configurations; i++)
+ priv->config_descriptor[i] = NULL;
+
+ for (i=0, r=LIBUSB_SUCCESS; ; i++)
+ {
+ // safe loop: release all dynamic resources
+ safe_free(cd_buf_actual);
+
+ // safe loop: end of loop condition
+ if ((i >= dev->num_configurations) || (r != LIBUSB_SUCCESS))
+ break;
+
+ size = sizeof(USB_CONFIGURATION_DESCRIPTOR_SHORT);
+ memset(&cd_buf_short, 0, size);
+
+ cd_buf_short.req.ConnectionIndex = (ULONG)priv->port;
+ cd_buf_short.req.SetupPacket.bmRequest = LIBUSB_ENDPOINT_IN;
+ cd_buf_short.req.SetupPacket.bRequest = USB_REQUEST_GET_DESCRIPTOR;
+ cd_buf_short.req.SetupPacket.wValue = (USB_CONFIGURATION_DESCRIPTOR_TYPE << 8) | i;
+ cd_buf_short.req.SetupPacket.wIndex = 0;
+ cd_buf_short.req.SetupPacket.wLength = (USHORT)(size - sizeof(USB_DESCRIPTOR_REQUEST));
+
+ // Dummy call to get the required data size. Initial failures are reported as info rather
+ // than error as they can occur for non-penalizing situations, such as with some hubs.
+ // coverity[tainted_data_argument]
+ if (!DeviceIoControl(hub_handle, IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION, &cd_buf_short, size,
+ &cd_buf_short, size, &ret_size, NULL)) {
+ usbi_info(ctx, "could not access configuration descriptor (dummy) for '%s': %s", device_id, windows_error_str(0));
+ LOOP_BREAK(LIBUSB_ERROR_IO);
+ }
+
+ if ((ret_size != size) || (cd_buf_short.data.wTotalLength < sizeof(USB_CONFIGURATION_DESCRIPTOR))) {
+ usbi_info(ctx, "unexpected configuration descriptor size (dummy) for '%s'.", device_id);
+ LOOP_BREAK(LIBUSB_ERROR_IO);
+ }
+
+ size = sizeof(USB_DESCRIPTOR_REQUEST) + cd_buf_short.data.wTotalLength;
+ if ((cd_buf_actual = (PUSB_DESCRIPTOR_REQUEST) calloc(1, size)) == NULL) {
+ usbi_err(ctx, "could not allocate configuration descriptor buffer for '%s'.", device_id);
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ memset(cd_buf_actual, 0, size);
+
+ // Actual call
+ cd_buf_actual->ConnectionIndex = (ULONG)priv->port;
+ cd_buf_actual->SetupPacket.bmRequest = LIBUSB_ENDPOINT_IN;
+ cd_buf_actual->SetupPacket.bRequest = USB_REQUEST_GET_DESCRIPTOR;
+ cd_buf_actual->SetupPacket.wValue = (USB_CONFIGURATION_DESCRIPTOR_TYPE << 8) | i;
+ cd_buf_actual->SetupPacket.wIndex = 0;
+ cd_buf_actual->SetupPacket.wLength = (USHORT)(size - sizeof(USB_DESCRIPTOR_REQUEST));
+
+ if (!DeviceIoControl(hub_handle, IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION, cd_buf_actual, size,
+ cd_buf_actual, size, &ret_size, NULL)) {
+ usbi_err(ctx, "could not access configuration descriptor (actual) for '%s': %s", device_id, windows_error_str(0));
+ LOOP_BREAK(LIBUSB_ERROR_IO);
+ }
+
+ cd_data = (PUSB_CONFIGURATION_DESCRIPTOR)((UCHAR*)cd_buf_actual+sizeof(USB_DESCRIPTOR_REQUEST));
+
+ if ((size != ret_size) || (cd_data->wTotalLength != cd_buf_short.data.wTotalLength)) {
+ usbi_err(ctx, "unexpected configuration descriptor size (actual) for '%s'.", device_id);
+ LOOP_BREAK(LIBUSB_ERROR_IO);
+ }
+
+ if (cd_data->bDescriptorType != USB_CONFIGURATION_DESCRIPTOR_TYPE) {
+ usbi_err(ctx, "not a configuration descriptor for '%s'", device_id);
+ LOOP_BREAK(LIBUSB_ERROR_IO);
+ }
+
+ usbi_dbg("cached config descriptor %d (bConfigurationValue=%d, %d bytes)",
+ i, cd_data->bConfigurationValue, cd_data->wTotalLength);
+
+ // Cache the descriptor
+ priv->config_descriptor[i] = (unsigned char*) malloc(cd_data->wTotalLength);
+ if (priv->config_descriptor[i] == NULL)
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ memcpy(priv->config_descriptor[i], cd_data, cd_data->wTotalLength);
+ }
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * Populate a libusb device structure
+ */
+static int init_device(struct libusb_device* dev, struct libusb_device* parent_dev,
+ uint8_t port_number, char* device_id, DWORD devinst)
+{
+ HANDLE handle;
+ DWORD size;
+ USB_NODE_CONNECTION_INFORMATION_EX conn_info;
+ USB_NODE_CONNECTION_INFORMATION_EX_V2 conn_info_v2;
+ struct windows_device_priv *priv, *parent_priv;
+ struct libusb_context *ctx;
+ struct libusb_device* tmp_dev;
+ unsigned long tmp_id;
+ unsigned i;
+
+ if ((dev == NULL) || (parent_dev == NULL)) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ ctx = DEVICE_CTX(dev);
+ priv = _device_priv(dev);
+ parent_priv = _device_priv(parent_dev);
+ if (parent_priv->apib->id != USB_API_HUB) {
+ usbi_warn(ctx, "parent for device '%s' is not a hub", device_id);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ // It is possible for the parent hub not to have been initialized yet
+ // If that's the case, lookup the ancestors to set the bus number
+ if (parent_dev->bus_number == 0) {
+ for (i=2; ; i++) {
+ tmp_id = get_ancestor_session_id(devinst, i);
+ if (tmp_id == 0) break;
+ tmp_dev = usbi_get_device_by_session_id(ctx, tmp_id);
+ if (tmp_dev == NULL) continue;
+ if (tmp_dev->bus_number != 0) {
+ usbi_dbg("got bus number from ancestor #%d", i);
+ parent_dev->bus_number = tmp_dev->bus_number;
+ libusb_unref_device(tmp_dev);
+ break;
+ }
+ libusb_unref_device(tmp_dev);
+ }
+ }
+ if (parent_dev->bus_number == 0) {
+ usbi_err(ctx, "program assertion failed: unable to find ancestor bus number for '%s'", device_id);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ dev->bus_number = parent_dev->bus_number;
+ priv->port = port_number;
+ dev->port_number = port_number;
+ priv->depth = parent_priv->depth + 1;
+ priv->parent_dev = parent_dev;
+ dev->parent_dev = parent_dev;
+
+ // If the device address is already set, we can stop here
+ if (dev->device_address != 0) {
+ return LIBUSB_SUCCESS;
+ }
+ memset(&conn_info, 0, sizeof(conn_info));
+ if (priv->depth != 0) { // Not a HCD hub
+ handle = CreateFileA(parent_priv->path, GENERIC_WRITE, FILE_SHARE_WRITE, NULL, OPEN_EXISTING,
+ FILE_FLAG_OVERLAPPED, NULL);
+ if (handle == INVALID_HANDLE_VALUE) {
+ usbi_warn(ctx, "could not open hub %s: %s", parent_priv->path, windows_error_str(0));
+ return LIBUSB_ERROR_ACCESS;
+ }
+ size = sizeof(conn_info);
+ conn_info.ConnectionIndex = (ULONG)port_number;
+ // coverity[tainted_data_argument]
+ if (!DeviceIoControl(handle, IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX, &conn_info, size,
+ &conn_info, size, &size, NULL)) {
+ usbi_warn(ctx, "could not get node connection information for device '%s': %s",
+ device_id, windows_error_str(0));
+ safe_closehandle(handle);
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ if (conn_info.ConnectionStatus == NoDeviceConnected) {
+ usbi_err(ctx, "device '%s' is no longer connected!", device_id);
+ safe_closehandle(handle);
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ memcpy(&priv->dev_descriptor, &(conn_info.DeviceDescriptor), sizeof(USB_DEVICE_DESCRIPTOR));
+ dev->num_configurations = priv->dev_descriptor.bNumConfigurations;
+ priv->active_config = conn_info.CurrentConfigurationValue;
+ usbi_dbg("found %d configurations (active conf: %d)", dev->num_configurations, priv->active_config);
+ // If we can't read the config descriptors, just set the number of confs to zero
+ if (cache_config_descriptors(dev, handle, device_id) != LIBUSB_SUCCESS) {
+ dev->num_configurations = 0;
+ priv->dev_descriptor.bNumConfigurations = 0;
+ }
+
+ // In their great wisdom, Microsoft decided to BREAK the USB speed report between Windows 7 and Windows 8
+ if (windows_version >= WINDOWS_8) {
+ memset(&conn_info_v2, 0, sizeof(conn_info_v2));
+ size = sizeof(conn_info_v2);
+ conn_info_v2.ConnectionIndex = (ULONG)port_number;
+ conn_info_v2.Length = size;
+ conn_info_v2.SupportedUsbProtocols.Usb300 = 1;
+ if (!DeviceIoControl(handle, IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2,
+ &conn_info_v2, size, &conn_info_v2, size, &size, NULL)) {
+ usbi_warn(ctx, "could not get node connection information (V2) for device '%s': %s",
+ device_id, windows_error_str(0));
+ } else if (conn_info_v2.Flags.DeviceIsOperatingAtSuperSpeedOrHigher) {
+ conn_info.Speed = 3;
+ }
+ }
+
+ safe_closehandle(handle);
+
+ if (conn_info.DeviceAddress > UINT8_MAX) {
+ usbi_err(ctx, "program assertion failed: device address overflow");
+ }
+ dev->device_address = (uint8_t)conn_info.DeviceAddress + 1;
+ if (dev->device_address == 1) {
+ usbi_err(ctx, "program assertion failed: device address collision with root hub");
+ }
+ switch (conn_info.Speed) {
+ case 0: dev->speed = LIBUSB_SPEED_LOW; break;
+ case 1: dev->speed = LIBUSB_SPEED_FULL; break;
+ case 2: dev->speed = LIBUSB_SPEED_HIGH; break;
+ case 3: dev->speed = LIBUSB_SPEED_SUPER; break;
+ default:
+ usbi_warn(ctx, "Got unknown device speed %d", conn_info.Speed);
+ break;
+ }
+ } else {
+ dev->device_address = 1; // root hubs are set to use device number 1
+ force_hcd_device_descriptor(dev);
+ }
+
+ usbi_sanitize_device(dev);
+
+ usbi_dbg("(bus: %d, addr: %d, depth: %d, port: %d): '%s'",
+ dev->bus_number, dev->device_address, priv->depth, priv->port, device_id);
+
+ return LIBUSB_SUCCESS;
+}
+
+// Returns the api type, or 0 if not found/unsupported
+static void get_api_type(struct libusb_context *ctx, HDEVINFO *dev_info,
+ SP_DEVINFO_DATA *dev_info_data, int *api, int *sub_api)
+{
+ // Precedence for filter drivers vs driver is in the order of this array
+ struct driver_lookup lookup[3] = {
+ {"\0\0", SPDRP_SERVICE, "driver"},
+ {"\0\0", SPDRP_UPPERFILTERS, "upper filter driver"},
+ {"\0\0", SPDRP_LOWERFILTERS, "lower filter driver"}
+ };
+ DWORD size, reg_type;
+ unsigned k, l;
+ int i, j;
+
+ *api = USB_API_UNSUPPORTED;
+ *sub_api = SUB_API_NOTSET;
+ // Check the service & filter names to know the API we should use
+ for (k=0; k<3; k++) {
+ if (pSetupDiGetDeviceRegistryPropertyA(*dev_info, dev_info_data, lookup[k].reg_prop,
+ ®_type, (BYTE*)lookup[k].list, MAX_KEY_LENGTH, &size)) {
+ // Turn the REG_SZ SPDRP_SERVICE into REG_MULTI_SZ
+ if (lookup[k].reg_prop == SPDRP_SERVICE) {
+ // our buffers are MAX_KEY_LENGTH+1 so we can overflow if needed
+ lookup[k].list[safe_strlen(lookup[k].list)+1] = 0;
+ }
+ // MULTI_SZ is a pain to work with. Turn it into something much more manageable
+ // NB: none of the driver names we check against contain LIST_SEPARATOR,
+ // (currently ';'), so even if an unsuported one does, it's not an issue
+ for (l=0; (lookup[k].list[l] != 0) || (lookup[k].list[l+1] != 0); l++) {
+ if (lookup[k].list[l] == 0) {
+ lookup[k].list[l] = LIST_SEPARATOR;
+ }
+ }
+ usbi_dbg("%s(s): %s", lookup[k].designation, lookup[k].list);
+ } else {
+ if (GetLastError() != ERROR_INVALID_DATA) {
+ usbi_dbg("could not access %s: %s", lookup[k].designation, windows_error_str(0));
+ }
+ lookup[k].list[0] = 0;
+ }
+ }
+
+ for (i=1; i<USB_API_MAX; i++) {
+ for (k=0; k<3; k++) {
+ j = get_sub_api(lookup[k].list, i);
+ if (j >= 0) {
+ usbi_dbg("matched %s name against %s",
+ lookup[k].designation, (i!=USB_API_WINUSBX)?usb_api_backend[i].designation:sub_api_name[j]);
+ *api = i;
+ *sub_api = j;
+ return;
+ }
+ }
+ }
+}
+
+static int set_composite_interface(struct libusb_context* ctx, struct libusb_device* dev,
+ char* dev_interface_path, char* device_id, int api, int sub_api)
+{
+ unsigned i;
+ struct windows_device_priv *priv = _device_priv(dev);
+ int interface_number;
+
+ if (priv->apib->id != USB_API_COMPOSITE) {
+ usbi_err(ctx, "program assertion failed: '%s' is not composite", device_id);
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ // Because MI_## are not necessarily in sequential order (some composite
+ // devices will have only MI_00 & MI_03 for instance), we retrieve the actual
+ // interface number from the path's MI value
+ interface_number = 0;
+ for (i=0; device_id[i] != 0; ) {
+ if ( (device_id[i++] == 'M') && (device_id[i++] == 'I')
+ && (device_id[i++] == '_') ) {
+ interface_number = (device_id[i++] - '0')*10;
+ interface_number += device_id[i] - '0';
+ break;
+ }
+ }
+
+ if (device_id[i] == 0) {
+ usbi_warn(ctx, "failure to read interface number for %s. Using default value %d",
+ device_id, interface_number);
+ }
+
+ if (priv->usb_interface[interface_number].path != NULL) {
+ if (api == USB_API_HID) {
+ // HID devices can have multiple collections (COL##) for each MI_## interface
+ usbi_dbg("interface[%d] already set - ignoring HID collection: %s",
+ interface_number, device_id);
+ return LIBUSB_ERROR_ACCESS;
+ }
+ // In other cases, just use the latest data
+ safe_free(priv->usb_interface[interface_number].path);
+ }
+
+ usbi_dbg("interface[%d] = %s", interface_number, dev_interface_path);
+ priv->usb_interface[interface_number].path = dev_interface_path;
+ priv->usb_interface[interface_number].apib = &usb_api_backend[api];
+ priv->usb_interface[interface_number].sub_api = sub_api;
+ if ((api == USB_API_HID) && (priv->hid == NULL)) {
+ priv->hid = (struct hid_device_priv*) calloc(1, sizeof(struct hid_device_priv));
+ if (priv->hid == NULL)
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static int set_hid_interface(struct libusb_context* ctx, struct libusb_device* dev,
+ char* dev_interface_path)
+{
+ int i;
+ struct windows_device_priv *priv = _device_priv(dev);
+
+ if (priv->hid == NULL) {
+ usbi_err(ctx, "program assertion failed: parent is not HID");
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ if (priv->hid->nb_interfaces == USB_MAXINTERFACES) {
+ usbi_err(ctx, "program assertion failed: max USB interfaces reached for HID device");
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+ for (i=0; i<priv->hid->nb_interfaces; i++) {
+ if (safe_strcmp(priv->usb_interface[i].path, dev_interface_path) == 0) {
+ usbi_dbg("interface[%d] already set to %s", i, dev_interface_path);
+ return LIBUSB_SUCCESS;
+ }
+ }
+
+ priv->usb_interface[priv->hid->nb_interfaces].path = dev_interface_path;
+ priv->usb_interface[priv->hid->nb_interfaces].apib = &usb_api_backend[USB_API_HID];
+ usbi_dbg("interface[%d] = %s", priv->hid->nb_interfaces, dev_interface_path);
+ priv->hid->nb_interfaces++;
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * get_device_list: libusb backend device enumeration function
+ */
+static int windows_get_device_list(struct libusb_context *ctx, struct discovered_devs **_discdevs)
+{
+ struct discovered_devs *discdevs;
+ HDEVINFO dev_info = { 0 };
+ const char* usb_class[] = {"USB", "NUSB3", "IUSB3"};
+ SP_DEVINFO_DATA dev_info_data = { 0 };
+ SP_DEVICE_INTERFACE_DETAIL_DATA_A *dev_interface_details = NULL;
+ GUID hid_guid;
+#define MAX_ENUM_GUIDS 64
+ const GUID* guid[MAX_ENUM_GUIDS];
+#define HCD_PASS 0
+#define HUB_PASS 1
+#define GEN_PASS 2
+#define DEV_PASS 3
+#define HID_PASS 4
+ int r = LIBUSB_SUCCESS;
+ int api, sub_api;
+ size_t class_index = 0;
+ unsigned int nb_guids, pass, i, j, ancestor;
+ char path[MAX_PATH_LENGTH];
+ char strbuf[MAX_PATH_LENGTH];
+ struct libusb_device *dev, *parent_dev;
+ struct windows_device_priv *priv, *parent_priv;
+ char* dev_interface_path = NULL;
+ char* dev_id_path = NULL;
+ unsigned long session_id;
+ DWORD size, reg_type, port_nr, install_state;
+ HKEY key;
+ WCHAR guid_string_w[MAX_GUID_STRING_LENGTH];
+ GUID* if_guid;
+ LONG s;
+ // Keep a list of newly allocated devs to unref
+ libusb_device** unref_list;
+ unsigned int unref_size = 64;
+ unsigned int unref_cur = 0;
+
+ // PASS 1 : (re)enumerate HCDs (allows for HCD hotplug)
+ // PASS 2 : (re)enumerate HUBS
+ // PASS 3 : (re)enumerate generic USB devices (including driverless)
+ // and list additional USB device interface GUIDs to explore
+ // PASS 4 : (re)enumerate master USB devices that have a device interface
+ // PASS 5+: (re)enumerate device interfaced GUIDs (including HID) and
+ // set the device interfaces.
+
+ // Init the GUID table
+ guid[HCD_PASS] = &GUID_DEVINTERFACE_USB_HOST_CONTROLLER;
+ guid[HUB_PASS] = &GUID_DEVINTERFACE_USB_HUB;
+ guid[GEN_PASS] = NULL;
+ guid[DEV_PASS] = &GUID_DEVINTERFACE_USB_DEVICE;
+ HidD_GetHidGuid(&hid_guid);
+ guid[HID_PASS] = &hid_guid;
+ nb_guids = HID_PASS+1;
+
+ unref_list = (libusb_device**) calloc(unref_size, sizeof(libusb_device*));
+ if (unref_list == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ for (pass = 0; ((pass < nb_guids) && (r == LIBUSB_SUCCESS)); pass++) {
+//#define ENUM_DEBUG
+#ifdef ENUM_DEBUG
+ const char *passname[] = { "HCD", "HUB", "GEN", "DEV", "HID", "EXT" };
+ usbi_dbg("#### PROCESSING %ss %s", passname[(pass<=HID_PASS)?pass:HID_PASS+1],
+ (pass!=GEN_PASS)?guid_to_string(guid[pass]):"");
+#endif
+ for (i = 0; ; i++) {
+ // safe loop: free up any (unprotected) dynamic resource
+ // NB: this is always executed before breaking the loop
+ safe_free(dev_interface_details);
+ safe_free(dev_interface_path);
+ safe_free(dev_id_path);
+ priv = parent_priv = NULL;
+ dev = parent_dev = NULL;
+
+ // Safe loop: end of loop conditions
+ if (r != LIBUSB_SUCCESS) {
+ break;
+ }
+ if ((pass == HCD_PASS) && (i == UINT8_MAX)) {
+ usbi_warn(ctx, "program assertion failed - found more than %d buses, skipping the rest.", UINT8_MAX);
+ break;
+ }
+ if (pass != GEN_PASS) {
+ // Except for GEN, all passes deal with device interfaces
+ dev_interface_details = get_interface_details(ctx, &dev_info, &dev_info_data, guid[pass], i);
+ if (dev_interface_details == NULL) {
+ break;
+ } else {
+ dev_interface_path = sanitize_path(dev_interface_details->DevicePath);
+ if (dev_interface_path == NULL) {
+ usbi_warn(ctx, "could not sanitize device interface path for '%s'", dev_interface_details->DevicePath);
+ continue;
+ }
+ }
+ } else {
+ // Workaround for a Nec/Renesas USB 3.0 driver bug where root hubs are
+ // being listed under the "NUSB3" PnP Symbolic Name rather than "USB".
+ // The Intel USB 3.0 driver behaves similar, but uses "IUSB3"
+ for (; class_index < ARRAYSIZE(usb_class); class_index++) {
+ if (get_devinfo_data(ctx, &dev_info, &dev_info_data, usb_class[class_index], i))
+ break;
+ i = 0;
+ }
+ if (class_index >= ARRAYSIZE(usb_class))
+ break;
+ }
+
+ // Read the Device ID path. This is what we'll use as UID
+ // Note that if the device is plugged in a different port or hub, the Device ID changes
+ if (CM_Get_Device_IDA(dev_info_data.DevInst, path, sizeof(path), 0) != CR_SUCCESS) {
+ usbi_warn(ctx, "could not read the device id path for devinst %X, skipping",
+ dev_info_data.DevInst);
+ continue;
+ }
+ dev_id_path = sanitize_path(path);
+ if (dev_id_path == NULL) {
+ usbi_warn(ctx, "could not sanitize device id path for devinst %X, skipping",
+ dev_info_data.DevInst);
+ continue;
+ }
+#ifdef ENUM_DEBUG
+ usbi_dbg("PRO: %s", dev_id_path);
+#endif
+
+ // The SPDRP_ADDRESS for USB devices is the device port number on the hub
+ port_nr = 0;
+ if ((pass >= HUB_PASS) && (pass <= GEN_PASS)) {
+ if ( (!pSetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_ADDRESS,
+ ®_type, (BYTE*)&port_nr, 4, &size))
+ || (size != 4) ) {
+ usbi_warn(ctx, "could not retrieve port number for device '%s', skipping: %s",
+ dev_id_path, windows_error_str(0));
+ continue;
+ }
+ }
+
+ // Set API to use or get additional data from generic pass
+ api = USB_API_UNSUPPORTED;
+ sub_api = SUB_API_NOTSET;
+ switch (pass) {
+ case HCD_PASS:
+ break;
+ case GEN_PASS:
+ // We use the GEN pass to detect driverless devices...
+ size = sizeof(strbuf);
+ if (!pSetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_DRIVER,
+ ®_type, (BYTE*)strbuf, size, &size)) {
+ usbi_info(ctx, "The following device has no driver: '%s'", dev_id_path);
+ usbi_info(ctx, "libusb will not be able to access it.");
+ }
+ // ...and to add the additional device interface GUIDs
+ key = pSetupDiOpenDevRegKey(dev_info, &dev_info_data, DICS_FLAG_GLOBAL, 0, DIREG_DEV, KEY_READ);
+ if (key != INVALID_HANDLE_VALUE) {
+ size = sizeof(guid_string_w);
+ s = pRegQueryValueExW(key, L"DeviceInterfaceGUIDs", NULL, ®_type,
+ (BYTE*)guid_string_w, &size);
+ pRegCloseKey(key);
+ if (s == ERROR_SUCCESS) {
+ if (nb_guids >= MAX_ENUM_GUIDS) {
+ // If this assert is ever reported, grow a GUID table dynamically
+ usbi_err(ctx, "program assertion failed: too many GUIDs");
+ LOOP_BREAK(LIBUSB_ERROR_OVERFLOW);
+ }
+ if_guid = (GUID*) calloc(1, sizeof(GUID));
+ if (if_guid == NULL) {
+ usbi_err(ctx, "could not calloc for if_guid: not enough memory");
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ pCLSIDFromString(guid_string_w, if_guid);
+ guid[nb_guids++] = if_guid;
+ usbi_dbg("extra GUID: %s", guid_to_string(if_guid));
+ }
+ }
+ break;
+ case HID_PASS:
+ api = USB_API_HID;
+ break;
+ default:
+ // Get the API type (after checking that the driver installation is OK)
+ if ( (!pSetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_INSTALL_STATE,
+ ®_type, (BYTE*)&install_state, 4, &size))
+ || (size != 4) ){
+ usbi_warn(ctx, "could not detect installation state of driver for '%s': %s",
+ dev_id_path, windows_error_str(0));
+ } else if (install_state != 0) {
+ usbi_warn(ctx, "driver for device '%s' is reporting an issue (code: %d) - skipping",
+ dev_id_path, install_state);
+ continue;
+ }
+ get_api_type(ctx, &dev_info, &dev_info_data, &api, &sub_api);
+ break;
+ }
+
+ // Find parent device (for the passes that need it)
+ switch (pass) {
+ case HCD_PASS:
+ case DEV_PASS:
+ case HUB_PASS:
+ break;
+ default:
+ // Go through the ancestors until we see a face we recognize
+ parent_dev = NULL;
+ for (ancestor = 1; parent_dev == NULL; ancestor++) {
+ session_id = get_ancestor_session_id(dev_info_data.DevInst, ancestor);
+ if (session_id == 0) {
+ break;
+ }
+ parent_dev = usbi_get_device_by_session_id(ctx, session_id);
+ }
+ if (parent_dev == NULL) {
+ usbi_dbg("unlisted ancestor for '%s' (non USB HID, newly connected, etc.) - ignoring", dev_id_path);
+ continue;
+ }
+ parent_priv = _device_priv(parent_dev);
+ // virtual USB devices are also listed during GEN - don't process these yet
+ if ( (pass == GEN_PASS) && (parent_priv->apib->id != USB_API_HUB) ) {
+ libusb_unref_device(parent_dev);
+ continue;
+ }
+ break;
+ }
+
+ // Create new or match existing device, using the (hashed) device_id as session id
+ if (pass <= DEV_PASS) { // For subsequent passes, we'll lookup the parent
+ // These are the passes that create "new" devices
+ session_id = htab_hash(dev_id_path);
+ dev = usbi_get_device_by_session_id(ctx, session_id);
+ if (dev == NULL) {
+ if (pass == DEV_PASS) {
+ // This can occur if the OS only reports a newly plugged device after we started enum
+ usbi_warn(ctx, "'%s' was only detected in late pass (newly connected device?)"
+ " - ignoring", dev_id_path);
+ continue;
+ }
+ usbi_dbg("allocating new device for session [%X]", session_id);
+ if ((dev = usbi_alloc_device(ctx, session_id)) == NULL) {
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ windows_device_priv_init(dev);
+ } else {
+ usbi_dbg("found existing device for session [%X] (%d.%d)",
+ session_id, dev->bus_number, dev->device_address);
+ }
+ // Keep track of devices that need unref
+ unref_list[unref_cur++] = dev;
+ if (unref_cur >= unref_size) {
+ unref_size += 64;
+ unref_list = usbi_reallocf(unref_list, unref_size*sizeof(libusb_device*));
+ if (unref_list == NULL) {
+ usbi_err(ctx, "could not realloc list for unref - aborting.");
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ }
+ priv = _device_priv(dev);
+ }
+
+ // Setup device
+ switch (pass) {
+ case HCD_PASS:
+ dev->bus_number = (uint8_t)(i + 1); // bus 0 is reserved for disconnected
+ dev->device_address = 0;
+ dev->num_configurations = 0;
+ priv->apib = &usb_api_backend[USB_API_HUB];
+ priv->sub_api = SUB_API_NOTSET;
+ priv->depth = UINT8_MAX; // Overflow to 0 for HCD Hubs
+ priv->path = dev_interface_path; dev_interface_path = NULL;
+ break;
+ case HUB_PASS:
+ case DEV_PASS:
+ // If the device has already been setup, don't do it again
+ if (priv->path != NULL)
+ break;
+ // Take care of API initialization
+ priv->path = dev_interface_path; dev_interface_path = NULL;
+ priv->apib = &usb_api_backend[api];
+ priv->sub_api = sub_api;
+ switch(api) {
+ case USB_API_COMPOSITE:
+ case USB_API_HUB:
+ break;
+ case USB_API_HID:
+ priv->hid = calloc(1, sizeof(struct hid_device_priv));
+ if (priv->hid == NULL) {
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ priv->hid->nb_interfaces = 0;
+ break;
+ default:
+ // For other devices, the first interface is the same as the device
+ priv->usb_interface[0].path = (char*) calloc(safe_strlen(priv->path)+1, 1);
+ if (priv->usb_interface[0].path != NULL) {
+ safe_strcpy(priv->usb_interface[0].path, safe_strlen(priv->path)+1, priv->path);
+ } else {
+ usbi_warn(ctx, "could not duplicate interface path '%s'", priv->path);
+ }
+ // The following is needed if we want API calls to work for both simple
+ // and composite devices.
+ for(j=0; j<USB_MAXINTERFACES; j++) {
+ priv->usb_interface[j].apib = &usb_api_backend[api];
+ }
+ break;
+ }
+ break;
+ case GEN_PASS:
+ r = init_device(dev, parent_dev, (uint8_t)port_nr, dev_id_path, dev_info_data.DevInst);
+ if (r == LIBUSB_SUCCESS) {
+ // Append device to the list of discovered devices
+ discdevs = discovered_devs_append(*_discdevs, dev);
+ if (!discdevs) {
+ LOOP_BREAK(LIBUSB_ERROR_NO_MEM);
+ }
+ *_discdevs = discdevs;
+ } else if (r == LIBUSB_ERROR_NO_DEVICE) {
+ // This can occur if the device was disconnected but Windows hasn't
+ // refreshed its enumeration yet - in that case, we ignore the device
+ r = LIBUSB_SUCCESS;
+ }
+ break;
+ default: // HID_PASS and later
+ if (parent_priv->apib->id == USB_API_HID) {
+ usbi_dbg("setting HID interface for [%lX]:", parent_dev->session_data);
+ r = set_hid_interface(ctx, parent_dev, dev_interface_path);
+ if (r != LIBUSB_SUCCESS) LOOP_BREAK(r);
+ dev_interface_path = NULL;
+ } else if (parent_priv->apib->id == USB_API_COMPOSITE) {
+ usbi_dbg("setting composite interface for [%lX]:", parent_dev->session_data);
+ switch (set_composite_interface(ctx, parent_dev, dev_interface_path, dev_id_path, api, sub_api)) {
+ case LIBUSB_SUCCESS:
+ dev_interface_path = NULL;
+ break;
+ case LIBUSB_ERROR_ACCESS:
+ // interface has already been set => make sure dev_interface_path is freed then
+ break;
+ default:
+ LOOP_BREAK(r);
+ break;
+ }
+ }
+ libusb_unref_device(parent_dev);
+ break;
+ }
+ }
+ }
+
+ // Free any additional GUIDs
+ for (pass = HID_PASS+1; pass < nb_guids; pass++) {
+ safe_free(guid[pass]);
+ }
+
+ // Unref newly allocated devs
+ if (unref_list != NULL) {
+ for (i=0; i<unref_cur; i++) {
+ safe_unref_device(unref_list[i]);
+ }
+ free(unref_list);
+ }
+
+ return r;
+}
+
+/*
+ * exit: libusb backend deinitialization function
+ */
+static void windows_exit(void)
+{
+ int i;
+ HANDLE semaphore;
+ char sem_name[11+1+8]; // strlen(libusb_init)+'\0'+(32-bit hex PID)
+
+ sprintf(sem_name, "libusb_init%08X", (unsigned int)GetCurrentProcessId()&0xFFFFFFFF);
+ semaphore = CreateSemaphoreA(NULL, 1, 1, sem_name);
+ if (semaphore == NULL) {
+ return;
+ }
+
+ // A successful wait brings our semaphore count to 0 (unsignaled)
+ // => any concurent wait stalls until the semaphore release
+ if (WaitForSingleObject(semaphore, INFINITE) != WAIT_OBJECT_0) {
+ CloseHandle(semaphore);
+ return;
+ }
+
+ // Only works if exits and inits are balanced exactly
+ if (--concurrent_usage < 0) { // Last exit
+ for (i=0; i<USB_API_MAX; i++) {
+ usb_api_backend[i].exit(SUB_API_NOTSET);
+ }
+ exit_polling();
+
+ if (timer_thread) {
+ // actually the signal to quit the thread.
+ if (!pPostThreadMessageA(timer_thread_id, WM_TIMER_EXIT, 0, 0) ||
+ (WaitForSingleObject(timer_thread, INFINITE) != WAIT_OBJECT_0)) {
+ usbi_dbg("could not wait for timer thread to quit");
+ TerminateThread(timer_thread, 1);
+ }
+ CloseHandle(timer_thread);
+ timer_thread = NULL;
+ timer_thread_id = 0;
+ }
+ htab_destroy();
+ usbi_mutex_destroy(&autoclaim_lock);
+ }
+
+ ReleaseSemaphore(semaphore, 1, NULL); // increase count back to 1
+ CloseHandle(semaphore);
+}
+
+static int windows_get_device_descriptor(struct libusb_device *dev, unsigned char *buffer, int *host_endian)
+{
+ struct windows_device_priv *priv = _device_priv(dev);
+
+ memcpy(buffer, &(priv->dev_descriptor), DEVICE_DESC_LENGTH);
+ *host_endian = 0;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int windows_get_config_descriptor(struct libusb_device *dev, uint8_t config_index, unsigned char *buffer, size_t len, int *host_endian)
+{
+ struct windows_device_priv *priv = _device_priv(dev);
+ PUSB_CONFIGURATION_DESCRIPTOR config_header;
+ size_t size;
+
+ // config index is zero based
+ if (config_index >= dev->num_configurations)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ if ((priv->config_descriptor == NULL) || (priv->config_descriptor[config_index] == NULL))
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ config_header = (PUSB_CONFIGURATION_DESCRIPTOR)priv->config_descriptor[config_index];
+
+ size = MIN(config_header->wTotalLength, len);
+ memcpy(buffer, priv->config_descriptor[config_index], size);
+ *host_endian = 0;
+
+ return (int)size;
+}
+
+/*
+ * return the cached copy of the active config descriptor
+ */
+static int windows_get_active_config_descriptor(struct libusb_device *dev, unsigned char *buffer, size_t len, int *host_endian)
+{
+ struct windows_device_priv *priv = _device_priv(dev);
+
+ if (priv->active_config == 0)
+ return LIBUSB_ERROR_NOT_FOUND;
+
+ // config index is zero based
+ return windows_get_config_descriptor(dev, (uint8_t)(priv->active_config-1), buffer, len, host_endian);
+}
+
+static int windows_open(struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+
+ if (priv->apib == NULL) {
+ usbi_err(ctx, "program assertion failed - device is not initialized");
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ return priv->apib->open(SUB_API_NOTSET, dev_handle);
+}
+
+static void windows_close(struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ priv->apib->close(SUB_API_NOTSET, dev_handle);
+}
+
+static int windows_get_configuration(struct libusb_device_handle *dev_handle, int *config)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ if (priv->active_config == 0) {
+ *config = 0;
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ *config = priv->active_config;
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * from http://msdn.microsoft.com/en-us/library/ms793522.aspx: "The port driver
+ * does not currently expose a service that allows higher-level drivers to set
+ * the configuration."
+ */
+static int windows_set_configuration(struct libusb_device_handle *dev_handle, int config)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ int r = LIBUSB_SUCCESS;
+
+ if (config >= USB_MAXCONFIG)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ r = libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_OUT |
+ LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE,
+ LIBUSB_REQUEST_SET_CONFIGURATION, (uint16_t)config,
+ 0, NULL, 0, 1000);
+
+ if (r == LIBUSB_SUCCESS) {
+ priv->active_config = (uint8_t)config;
+ }
+ return r;
+}
+
+static int windows_claim_interface(struct libusb_device_handle *dev_handle, int iface)
+{
+ int r = LIBUSB_SUCCESS;
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ safe_free(priv->usb_interface[iface].endpoint);
+ priv->usb_interface[iface].nb_endpoints= 0;
+
+ r = priv->apib->claim_interface(SUB_API_NOTSET, dev_handle, iface);
+
+ if (r == LIBUSB_SUCCESS) {
+ r = windows_assign_endpoints(dev_handle, iface, 0);
+ }
+
+ return r;
+}
+
+static int windows_set_interface_altsetting(struct libusb_device_handle *dev_handle, int iface, int altsetting)
+{
+ int r = LIBUSB_SUCCESS;
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ safe_free(priv->usb_interface[iface].endpoint);
+ priv->usb_interface[iface].nb_endpoints= 0;
+
+ r = priv->apib->set_interface_altsetting(SUB_API_NOTSET, dev_handle, iface, altsetting);
+
+ if (r == LIBUSB_SUCCESS) {
+ r = windows_assign_endpoints(dev_handle, iface, altsetting);
+ }
+
+ return r;
+}
+
+static int windows_release_interface(struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ return priv->apib->release_interface(SUB_API_NOTSET, dev_handle, iface);
+}
+
+static int windows_clear_halt(struct libusb_device_handle *dev_handle, unsigned char endpoint)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ return priv->apib->clear_halt(SUB_API_NOTSET, dev_handle, endpoint);
+}
+
+static int windows_reset_device(struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ return priv->apib->reset_device(SUB_API_NOTSET, dev_handle);
+}
+
+// The 3 functions below are unlikely to ever get supported on Windows
+static int windows_kernel_driver_active(struct libusb_device_handle *dev_handle, int iface)
+{
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static int windows_attach_kernel_driver(struct libusb_device_handle *dev_handle, int iface)
+{
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static int windows_detach_kernel_driver(struct libusb_device_handle *dev_handle, int iface)
+{
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static void windows_destroy_device(struct libusb_device *dev)
+{
+ windows_device_priv_release(dev);
+}
+
+static void windows_clear_transfer_priv(struct usbi_transfer *itransfer)
+{
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+
+ usbi_free_fd(&transfer_priv->pollable_fd);
+ safe_free(transfer_priv->hid_buffer);
+ // When auto claim is in use, attempt to release the auto-claimed interface
+ auto_release(itransfer);
+}
+
+static int submit_bulk_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int r;
+
+ r = priv->apib->submit_bulk_transfer(SUB_API_NOTSET, itransfer);
+ if (r != LIBUSB_SUCCESS) {
+ return r;
+ }
+
+ usbi_add_pollfd(ctx, transfer_priv->pollable_fd.fd,
+ (short)(IS_XFERIN(transfer) ? POLLIN : POLLOUT));
+
+ return LIBUSB_SUCCESS;
+}
+
+static int submit_iso_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int r;
+
+ r = priv->apib->submit_iso_transfer(SUB_API_NOTSET, itransfer);
+ if (r != LIBUSB_SUCCESS) {
+ return r;
+ }
+
+ usbi_add_pollfd(ctx, transfer_priv->pollable_fd.fd,
+ (short)(IS_XFERIN(transfer) ? POLLIN : POLLOUT));
+
+ return LIBUSB_SUCCESS;
+}
+
+static int submit_control_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int r;
+
+ r = priv->apib->submit_control_transfer(SUB_API_NOTSET, itransfer);
+ if (r != LIBUSB_SUCCESS) {
+ return r;
+ }
+
+ usbi_add_pollfd(ctx, transfer_priv->pollable_fd.fd, POLLIN);
+
+ return LIBUSB_SUCCESS;
+
+}
+
+static int windows_submit_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return submit_control_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ if (IS_XFEROUT(transfer) &&
+ transfer->flags & LIBUSB_TRANSFER_ADD_ZERO_PACKET)
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ return submit_bulk_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return submit_iso_transfer(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ default:
+ usbi_err(TRANSFER_CTX(transfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static int windows_abort_control(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+
+ return priv->apib->abort_control(SUB_API_NOTSET, itransfer);
+}
+
+static int windows_abort_transfers(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+
+ return priv->apib->abort_transfers(SUB_API_NOTSET, itransfer);
+}
+
+static int windows_cancel_transfer(struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ return windows_abort_control(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ return windows_abort_transfers(itransfer);
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ default:
+ usbi_err(ITRANSFER_CTX(itransfer), "unknown endpoint type %d", transfer->type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+static void windows_transfer_callback(struct usbi_transfer *itransfer, uint32_t io_result, uint32_t io_size)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int status, istatus;
+
+ usbi_dbg("handling I/O completion with errcode %d, size %d", io_result, io_size);
+
+ switch(io_result) {
+ case NO_ERROR:
+ status = priv->apib->copy_transfer_data(SUB_API_NOTSET, itransfer, io_size);
+ break;
+ case ERROR_GEN_FAILURE:
+ usbi_dbg("detected endpoint stall");
+ status = LIBUSB_TRANSFER_STALL;
+ break;
+ case ERROR_SEM_TIMEOUT:
+ usbi_dbg("detected semaphore timeout");
+ status = LIBUSB_TRANSFER_TIMED_OUT;
+ break;
+ case ERROR_OPERATION_ABORTED:
+ istatus = priv->apib->copy_transfer_data(SUB_API_NOTSET, itransfer, io_size);
+ if (istatus != LIBUSB_TRANSFER_COMPLETED) {
+ usbi_dbg("Failed to copy partial data in aborted operation: %d", istatus);
+ }
+ if (itransfer->flags & USBI_TRANSFER_TIMED_OUT) {
+ usbi_dbg("detected timeout");
+ status = LIBUSB_TRANSFER_TIMED_OUT;
+ } else {
+ usbi_dbg("detected operation aborted");
+ status = LIBUSB_TRANSFER_CANCELLED;
+ }
+ break;
+ default:
+ usbi_err(ITRANSFER_CTX(itransfer), "detected I/O error %d: %s", io_result, windows_error_str(io_result));
+ status = LIBUSB_TRANSFER_ERROR;
+ break;
+ }
+ windows_clear_transfer_priv(itransfer); // Cancel polling
+ usbi_handle_transfer_completion(itransfer, (enum libusb_transfer_status)status);
+}
+
+static void windows_handle_callback (struct usbi_transfer *itransfer, uint32_t io_result, uint32_t io_size)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+
+ switch (transfer->type) {
+ case LIBUSB_TRANSFER_TYPE_CONTROL:
+ case LIBUSB_TRANSFER_TYPE_BULK:
+ case LIBUSB_TRANSFER_TYPE_INTERRUPT:
+ case LIBUSB_TRANSFER_TYPE_ISOCHRONOUS:
+ windows_transfer_callback (itransfer, io_result, io_size);
+ break;
+ case LIBUSB_TRANSFER_TYPE_BULK_STREAM:
+ usbi_warn(ITRANSFER_CTX(itransfer), "bulk stream transfers are not yet supported on this platform");
+ break;
+ default:
+ usbi_err(ITRANSFER_CTX(itransfer), "unknown endpoint type %d", transfer->type);
+ }
+}
+
+static int windows_handle_events(struct libusb_context *ctx, struct pollfd *fds, POLL_NFDS_TYPE nfds, int num_ready)
+{
+ struct windows_transfer_priv* transfer_priv = NULL;
+ POLL_NFDS_TYPE i = 0;
+ bool found;
+ struct usbi_transfer *transfer;
+ DWORD io_size, io_result;
+
+ usbi_mutex_lock(&ctx->open_devs_lock);
+ for (i = 0; i < nfds && num_ready > 0; i++) {
+
+ usbi_dbg("checking fd %d with revents = %04x", fds[i].fd, fds[i].revents);
+
+ if (!fds[i].revents) {
+ continue;
+ }
+
+ num_ready--;
+
+ // Because a Windows OVERLAPPED is used for poll emulation,
+ // a pollable fd is created and stored with each transfer
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ found = false;
+ list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
+ transfer_priv = usbi_transfer_get_os_priv(transfer);
+ if (transfer_priv->pollable_fd.fd == fds[i].fd) {
+ found = true;
+ break;
+ }
+ }
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ if (found) {
+ // Handle async requests that completed synchronously first
+ if (HasOverlappedIoCompletedSync(transfer_priv->pollable_fd.overlapped)) {
+ io_result = NO_ERROR;
+ io_size = (DWORD)transfer_priv->pollable_fd.overlapped->InternalHigh;
+ // Regular async overlapped
+ } else if (GetOverlappedResult(transfer_priv->pollable_fd.handle,
+ transfer_priv->pollable_fd.overlapped, &io_size, false)) {
+ io_result = NO_ERROR;
+ } else {
+ io_result = GetLastError();
+ }
+ usbi_remove_pollfd(ctx, transfer_priv->pollable_fd.fd);
+ // let handle_callback free the event using the transfer wfd
+ // If you don't use the transfer wfd, you run a risk of trying to free a
+ // newly allocated wfd that took the place of the one from the transfer.
+ windows_handle_callback(transfer, io_result, io_size);
+ } else {
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ usbi_err(ctx, "could not find a matching transfer for fd %x", fds[i]);
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+
+ usbi_mutex_unlock(&ctx->open_devs_lock);
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * Monotonic and real time functions
+ */
+unsigned __stdcall windows_clock_gettime_threaded(void* param)
+{
+ struct timer_request *request;
+ LARGE_INTEGER hires_counter;
+ MSG msg;
+
+ // The following call will create this thread's message queue
+ // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms644946.aspx
+ pPeekMessageA(&msg, NULL, WM_USER, WM_USER, PM_NOREMOVE);
+
+ // Signal windows_init() that we're ready to service requests
+ if (!SetEvent((HANDLE)param)) {
+ usbi_dbg("SetEvent failed for timer init event: %s", windows_error_str(0));
+ }
+ param = NULL;
+
+ // Main loop - wait for requests
+ while (1) {
+ if (pGetMessageA(&msg, NULL, WM_TIMER_REQUEST, WM_TIMER_EXIT) == -1) {
+ usbi_err(NULL, "GetMessage failed for timer thread: %s", windows_error_str(0));
+ return 1;
+ }
+
+ switch (msg.message) {
+ case WM_TIMER_REQUEST:
+ // Requests to this thread are for hires always
+ // Microsoft says that this function always succeeds on XP and later
+ // See https://msdn.microsoft.com/en-us/library/windows/desktop/ms644904.aspx
+ request = (struct timer_request *)msg.lParam;
+ QueryPerformanceCounter(&hires_counter);
+ request->tp->tv_sec = (long)(hires_counter.QuadPart / hires_frequency);
+ request->tp->tv_nsec = (long)(((hires_counter.QuadPart % hires_frequency) / 1000) * hires_ticks_to_ps);
+ if (!SetEvent(request->event)) {
+ usbi_err(NULL, "SetEvent failed for timer request: %s", windows_error_str(0));
+ }
+ break;
+
+ case WM_TIMER_EXIT:
+ usbi_dbg("timer thread quitting");
+ return 0;
+ }
+ }
+}
+
+static int windows_clock_gettime(int clk_id, struct timespec *tp)
+{
+ struct timer_request request;
+ FILETIME filetime;
+ ULARGE_INTEGER rtime;
+ DWORD r;
+ switch(clk_id) {
+ case USBI_CLOCK_MONOTONIC:
+ if (timer_thread) {
+ request.tp = tp;
+ request.event = CreateEvent(NULL, FALSE, FALSE, NULL);
+ if (request.event == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ if (!pPostThreadMessageA(timer_thread_id, WM_TIMER_REQUEST, 0, (LPARAM)&request)) {
+ usbi_err(NULL, "PostThreadMessage failed for timer thread: %s", windows_error_str(0));
+ CloseHandle(request.event);
+ return LIBUSB_ERROR_OTHER;
+ }
+
+ do {
+ r = WaitForSingleObject(request.event, TIMER_REQUEST_RETRY_MS);
+ if (r == WAIT_TIMEOUT) {
+ usbi_dbg("could not obtain a timer value within reasonable timeframe - too much load?");
+ }
+ else if (r == WAIT_FAILED) {
+ usbi_err(NULL, "WaitForSingleObject failed: %s", windows_error_str(0));
+ }
+ } while (r == WAIT_TIMEOUT);
+ CloseHandle(request.event);
+
+ if (r == WAIT_OBJECT_0) {
+ return LIBUSB_SUCCESS;
+ }
+ else {
+ return LIBUSB_ERROR_OTHER;
+ }
+ }
+ // Fall through and return real-time if monotonic was not detected @ timer init
+ case USBI_CLOCK_REALTIME:
+ // We follow http://msdn.microsoft.com/en-us/library/ms724928%28VS.85%29.aspx
+ // with a predef epoch_time to have an epoch that starts at 1970.01.01 00:00
+ // Note however that our resolution is bounded by the Windows system time
+ // functions and is at best of the order of 1 ms (or, usually, worse)
+ GetSystemTimeAsFileTime(&filetime);
+ rtime.LowPart = filetime.dwLowDateTime;
+ rtime.HighPart = filetime.dwHighDateTime;
+ rtime.QuadPart -= epoch_time;
+ tp->tv_sec = (long)(rtime.QuadPart / 10000000);
+ tp->tv_nsec = (long)((rtime.QuadPart % 10000000)*100);
+ return LIBUSB_SUCCESS;
+ default:
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+}
+
+
+// NB: MSVC6 does not support named initializers.
+const struct usbi_os_backend windows_backend = {
+ "Windows",
+ USBI_CAP_HAS_HID_ACCESS,
+ windows_init,
+ windows_exit,
+
+ windows_get_device_list,
+ NULL, /* hotplug_poll */
+ windows_open,
+ windows_close,
+
+ windows_get_device_descriptor,
+ windows_get_active_config_descriptor,
+ windows_get_config_descriptor,
+ NULL, /* get_config_descriptor_by_value() */
+
+ windows_get_configuration,
+ windows_set_configuration,
+ windows_claim_interface,
+ windows_release_interface,
+
+ windows_set_interface_altsetting,
+ windows_clear_halt,
+ windows_reset_device,
+
+ NULL, /* alloc_streams */
+ NULL, /* free_streams */
+
+ windows_kernel_driver_active,
+ windows_detach_kernel_driver,
+ windows_attach_kernel_driver,
+
+ windows_destroy_device,
+
+ windows_submit_transfer,
+ windows_cancel_transfer,
+ windows_clear_transfer_priv,
+
+ windows_handle_events,
+ NULL, /* handle_transfer_completion() */
+
+ windows_clock_gettime,
+#if defined(USBI_TIMERFD_AVAILABLE)
+ NULL,
+#endif
+ sizeof(struct windows_device_priv),
+ sizeof(struct windows_device_handle_priv),
+ sizeof(struct windows_transfer_priv),
+};
+
+
+/*
+ * USB API backends
+ */
+static int unsupported_init(int sub_api, struct libusb_context *ctx) {
+ return LIBUSB_SUCCESS;
+}
+static int unsupported_exit(int sub_api) {
+ return LIBUSB_SUCCESS;
+}
+static int unsupported_open(int sub_api, struct libusb_device_handle *dev_handle) {
+ PRINT_UNSUPPORTED_API(open);
+}
+static void unsupported_close(int sub_api, struct libusb_device_handle *dev_handle) {
+ usbi_dbg("unsupported API call for 'close'");
+}
+static int unsupported_configure_endpoints(int sub_api, struct libusb_device_handle *dev_handle, int iface) {
+ PRINT_UNSUPPORTED_API(configure_endpoints);
+}
+static int unsupported_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface) {
+ PRINT_UNSUPPORTED_API(claim_interface);
+}
+static int unsupported_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting) {
+ PRINT_UNSUPPORTED_API(set_interface_altsetting);
+}
+static int unsupported_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface) {
+ PRINT_UNSUPPORTED_API(release_interface);
+}
+static int unsupported_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint) {
+ PRINT_UNSUPPORTED_API(clear_halt);
+}
+static int unsupported_reset_device(int sub_api, struct libusb_device_handle *dev_handle) {
+ PRINT_UNSUPPORTED_API(reset_device);
+}
+static int unsupported_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ PRINT_UNSUPPORTED_API(submit_bulk_transfer);
+}
+static int unsupported_submit_iso_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ PRINT_UNSUPPORTED_API(submit_iso_transfer);
+}
+static int unsupported_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ PRINT_UNSUPPORTED_API(submit_control_transfer);
+}
+static int unsupported_abort_control(int sub_api, struct usbi_transfer *itransfer) {
+ PRINT_UNSUPPORTED_API(abort_control);
+}
+static int unsupported_abort_transfers(int sub_api, struct usbi_transfer *itransfer) {
+ PRINT_UNSUPPORTED_API(abort_transfers);
+}
+static int unsupported_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size) {
+ PRINT_UNSUPPORTED_API(copy_transfer_data);
+}
+static int common_configure_endpoints(int sub_api, struct libusb_device_handle *dev_handle, int iface) {
+ return LIBUSB_SUCCESS;
+}
+// These names must be uppercase
+const char* hub_driver_names[] = {"USBHUB", "USBHUB3", "USB3HUB", "NUSB3HUB", "RUSB3HUB", "FLXHCIH", "TIHUB3", "ETRONHUB3", "VIAHUB3", "ASMTHUB3", "IUSB3HUB", "VUSB3HUB", "AMDHUB30"};
+const char* composite_driver_names[] = {"USBCCGP"};
+const char* winusbx_driver_names[] = WINUSBX_DRV_NAMES;
+const char* hid_driver_names[] = {"HIDUSB", "MOUHID", "KBDHID"};
+const struct windows_usb_api_backend usb_api_backend[USB_API_MAX] = {
+ {
+ USB_API_UNSUPPORTED,
+ "Unsupported API",
+ NULL,
+ 0,
+ unsupported_init,
+ unsupported_exit,
+ unsupported_open,
+ unsupported_close,
+ unsupported_configure_endpoints,
+ unsupported_claim_interface,
+ unsupported_set_interface_altsetting,
+ unsupported_release_interface,
+ unsupported_clear_halt,
+ unsupported_reset_device,
+ unsupported_submit_bulk_transfer,
+ unsupported_submit_iso_transfer,
+ unsupported_submit_control_transfer,
+ unsupported_abort_control,
+ unsupported_abort_transfers,
+ unsupported_copy_transfer_data,
+ }, {
+ USB_API_HUB,
+ "HUB API",
+ hub_driver_names,
+ ARRAYSIZE(hub_driver_names),
+ unsupported_init,
+ unsupported_exit,
+ unsupported_open,
+ unsupported_close,
+ unsupported_configure_endpoints,
+ unsupported_claim_interface,
+ unsupported_set_interface_altsetting,
+ unsupported_release_interface,
+ unsupported_clear_halt,
+ unsupported_reset_device,
+ unsupported_submit_bulk_transfer,
+ unsupported_submit_iso_transfer,
+ unsupported_submit_control_transfer,
+ unsupported_abort_control,
+ unsupported_abort_transfers,
+ unsupported_copy_transfer_data,
+ }, {
+ USB_API_COMPOSITE,
+ "Composite API",
+ composite_driver_names,
+ ARRAYSIZE(composite_driver_names),
+ composite_init,
+ composite_exit,
+ composite_open,
+ composite_close,
+ common_configure_endpoints,
+ composite_claim_interface,
+ composite_set_interface_altsetting,
+ composite_release_interface,
+ composite_clear_halt,
+ composite_reset_device,
+ composite_submit_bulk_transfer,
+ composite_submit_iso_transfer,
+ composite_submit_control_transfer,
+ composite_abort_control,
+ composite_abort_transfers,
+ composite_copy_transfer_data,
+ }, {
+ USB_API_WINUSBX,
+ "WinUSB-like APIs",
+ winusbx_driver_names,
+ ARRAYSIZE(winusbx_driver_names),
+ winusbx_init,
+ winusbx_exit,
+ winusbx_open,
+ winusbx_close,
+ winusbx_configure_endpoints,
+ winusbx_claim_interface,
+ winusbx_set_interface_altsetting,
+ winusbx_release_interface,
+ winusbx_clear_halt,
+ winusbx_reset_device,
+ winusbx_submit_bulk_transfer,
+ unsupported_submit_iso_transfer,
+ winusbx_submit_control_transfer,
+ winusbx_abort_control,
+ winusbx_abort_transfers,
+ winusbx_copy_transfer_data,
+ }, {
+ USB_API_HID,
+ "HID API",
+ hid_driver_names,
+ ARRAYSIZE(hid_driver_names),
+ hid_init,
+ hid_exit,
+ hid_open,
+ hid_close,
+ common_configure_endpoints,
+ hid_claim_interface,
+ hid_set_interface_altsetting,
+ hid_release_interface,
+ hid_clear_halt,
+ hid_reset_device,
+ hid_submit_bulk_transfer,
+ unsupported_submit_iso_transfer,
+ hid_submit_control_transfer,
+ hid_abort_transfers,
+ hid_abort_transfers,
+ hid_copy_transfer_data,
+ },
+};
+
+
+/*
+ * WinUSB-like (WinUSB, libusb0/libusbK through libusbk DLL) API functions
+ */
+#define WinUSBX_Set(fn) do { if (native_winusb) WinUSBX[i].fn = (WinUsb_##fn##_t) GetProcAddress(h, "WinUsb_" #fn); \
+ else pLibK_GetProcAddress((PVOID*)&WinUSBX[i].fn, i, KUSB_FNID_##fn); } while (0)
+
+static int winusbx_init(int sub_api, struct libusb_context *ctx)
+{
+ HMODULE h = NULL;
+ bool native_winusb = false;
+ int i;
+ KLIB_VERSION LibK_Version;
+ LibK_GetProcAddress_t pLibK_GetProcAddress = NULL;
+ LibK_GetVersion_t pLibK_GetVersion = NULL;
+
+ h = GetModuleHandleA("libusbK");
+ if (h == NULL) {
+ h = LoadLibraryA("libusbK");
+ }
+ if (h == NULL) {
+ usbi_info(ctx, "libusbK DLL is not available, will use native WinUSB");
+ h = GetModuleHandleA("WinUSB");
+ if (h == NULL) {
+ h = LoadLibraryA("WinUSB");
+ } if (h == NULL) {
+ usbi_warn(ctx, "WinUSB DLL is not available either, "
+ "you will not be able to access devices outside of enumeration");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ } else {
+ usbi_dbg("using libusbK DLL for universal access");
+ pLibK_GetVersion = (LibK_GetVersion_t) GetProcAddress(h, "LibK_GetVersion");
+ if (pLibK_GetVersion != NULL) {
+ pLibK_GetVersion(&LibK_Version);
+ usbi_dbg("libusbK version: %d.%d.%d.%d", LibK_Version.Major, LibK_Version.Minor,
+ LibK_Version.Micro, LibK_Version.Nano);
+ }
+ pLibK_GetProcAddress = (LibK_GetProcAddress_t) GetProcAddress(h, "LibK_GetProcAddress");
+ if (pLibK_GetProcAddress == NULL) {
+ usbi_err(ctx, "LibK_GetProcAddress() not found in libusbK DLL");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+ native_winusb = (pLibK_GetProcAddress == NULL);
+ for (i=SUB_API_LIBUSBK; i<SUB_API_MAX; i++) {
+ WinUSBX_Set(AbortPipe);
+ WinUSBX_Set(ControlTransfer);
+ WinUSBX_Set(FlushPipe);
+ WinUSBX_Set(Free);
+ WinUSBX_Set(GetAssociatedInterface);
+ WinUSBX_Set(GetCurrentAlternateSetting);
+ WinUSBX_Set(GetDescriptor);
+ WinUSBX_Set(GetOverlappedResult);
+ WinUSBX_Set(GetPipePolicy);
+ WinUSBX_Set(GetPowerPolicy);
+ WinUSBX_Set(Initialize);
+ WinUSBX_Set(QueryDeviceInformation);
+ WinUSBX_Set(QueryInterfaceSettings);
+ WinUSBX_Set(QueryPipe);
+ WinUSBX_Set(ReadPipe);
+ WinUSBX_Set(ResetPipe);
+ WinUSBX_Set(SetCurrentAlternateSetting);
+ WinUSBX_Set(SetPipePolicy);
+ WinUSBX_Set(SetPowerPolicy);
+ WinUSBX_Set(WritePipe);
+ if (!native_winusb) {
+ WinUSBX_Set(ResetDevice);
+ }
+ if (WinUSBX[i].Initialize != NULL) {
+ WinUSBX[i].initialized = true;
+ usbi_dbg("initalized sub API %s", sub_api_name[i]);
+ } else {
+ usbi_warn(ctx, "Failed to initalize sub API %s", sub_api_name[i]);
+ WinUSBX[i].initialized = false;
+ }
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_exit(int sub_api)
+{
+ return LIBUSB_SUCCESS;
+}
+
+// NB: open and close must ensure that they only handle interface of
+// the right API type, as these functions can be called wholesale from
+// composite_open(), with interfaces belonging to different APIs
+static int winusbx_open(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+
+ HANDLE file_handle;
+ int i;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ // WinUSB requires a seperate handle for each interface
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if ( (priv->usb_interface[i].path != NULL)
+ && (priv->usb_interface[i].apib->id == USB_API_WINUSBX) ) {
+ file_handle = CreateFileA(priv->usb_interface[i].path, GENERIC_WRITE | GENERIC_READ, FILE_SHARE_WRITE | FILE_SHARE_READ,
+ NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OVERLAPPED, NULL);
+ if (file_handle == INVALID_HANDLE_VALUE) {
+ usbi_err(ctx, "could not open device %s (interface %d): %s", priv->usb_interface[i].path, i, windows_error_str(0));
+ switch(GetLastError()) {
+ case ERROR_FILE_NOT_FOUND: // The device was disconnected
+ return LIBUSB_ERROR_NO_DEVICE;
+ case ERROR_ACCESS_DENIED:
+ return LIBUSB_ERROR_ACCESS;
+ default:
+ return LIBUSB_ERROR_IO;
+ }
+ }
+ handle_priv->interface_handle[i].dev_handle = file_handle;
+ }
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static void winusbx_close(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE handle;
+ int i;
+
+ if (sub_api == SUB_API_NOTSET)
+ sub_api = priv->sub_api;
+ if (!WinUSBX[sub_api].initialized)
+ return;
+
+ if (priv->apib->id == USB_API_COMPOSITE) {
+ // If this is a composite device, just free and close all WinUSB-like
+ // interfaces directly (each is independent and not associated with another)
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if (priv->usb_interface[i].apib->id == USB_API_WINUSBX) {
+ handle = handle_priv->interface_handle[i].api_handle;
+ if ((handle != 0) && (handle != INVALID_HANDLE_VALUE)) {
+ WinUSBX[sub_api].Free(handle);
+ }
+ handle = handle_priv->interface_handle[i].dev_handle;
+ if ((handle != 0) && (handle != INVALID_HANDLE_VALUE)) {
+ CloseHandle(handle);
+ }
+ }
+ }
+ }
+ else {
+ // If this is a WinUSB device, free all interfaces above interface 0,
+ // then free and close interface 0 last
+ for (i = 1; i < USB_MAXINTERFACES; i++) {
+ handle = handle_priv->interface_handle[i].api_handle;
+ if ((handle != 0) && (handle != INVALID_HANDLE_VALUE)) {
+ WinUSBX[sub_api].Free(handle);
+ }
+ }
+ handle = handle_priv->interface_handle[0].api_handle;
+ if ((handle != 0) && (handle != INVALID_HANDLE_VALUE)) {
+ WinUSBX[sub_api].Free(handle);
+ }
+ handle = handle_priv->interface_handle[0].dev_handle;
+ if ((handle != 0) && (handle != INVALID_HANDLE_VALUE)) {
+ CloseHandle(handle);
+ }
+ }
+}
+
+static int winusbx_configure_endpoints(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE winusb_handle = handle_priv->interface_handle[iface].api_handle;
+ UCHAR policy;
+ ULONG timeout = 0;
+ uint8_t endpoint_address;
+ int i;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ // With handle and enpoints set (in parent), we can setup the default pipe properties
+ // see http://download.microsoft.com/download/D/1/D/D1DD7745-426B-4CC3-A269-ABBBE427C0EF/DVC-T705_DDC08.pptx
+ for (i=-1; i<priv->usb_interface[iface].nb_endpoints; i++) {
+ endpoint_address =(i==-1)?0:priv->usb_interface[iface].endpoint[i];
+ if (!WinUSBX[sub_api].SetPipePolicy(winusb_handle, endpoint_address,
+ PIPE_TRANSFER_TIMEOUT, sizeof(ULONG), &timeout)) {
+ usbi_dbg("failed to set PIPE_TRANSFER_TIMEOUT for control endpoint %02X", endpoint_address);
+ }
+ if ((i == -1) || (sub_api == SUB_API_LIBUSB0)) {
+ continue; // Other policies don't apply to control endpoint or libusb0
+ }
+ policy = false;
+ if (!WinUSBX[sub_api].SetPipePolicy(winusb_handle, endpoint_address,
+ SHORT_PACKET_TERMINATE, sizeof(UCHAR), &policy)) {
+ usbi_dbg("failed to disable SHORT_PACKET_TERMINATE for endpoint %02X", endpoint_address);
+ }
+ if (!WinUSBX[sub_api].SetPipePolicy(winusb_handle, endpoint_address,
+ IGNORE_SHORT_PACKETS, sizeof(UCHAR), &policy)) {
+ usbi_dbg("failed to disable IGNORE_SHORT_PACKETS for endpoint %02X", endpoint_address);
+ }
+ policy = true;
+ /* ALLOW_PARTIAL_READS must be enabled due to likely libusbK bug. See:
+ https://sourceforge.net/mailarchive/message.php?msg_id=29736015 */
+ if (!WinUSBX[sub_api].SetPipePolicy(winusb_handle, endpoint_address,
+ ALLOW_PARTIAL_READS, sizeof(UCHAR), &policy)) {
+ usbi_dbg("failed to enable ALLOW_PARTIAL_READS for endpoint %02X", endpoint_address);
+ }
+ if (!WinUSBX[sub_api].SetPipePolicy(winusb_handle, endpoint_address,
+ AUTO_CLEAR_STALL, sizeof(UCHAR), &policy)) {
+ usbi_dbg("failed to enable AUTO_CLEAR_STALL for endpoint %02X", endpoint_address);
+ }
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ bool is_using_usbccgp = (priv->apib->id == USB_API_COMPOSITE);
+ HANDLE file_handle, winusb_handle;
+ DWORD err;
+ int i;
+ SP_DEVICE_INTERFACE_DETAIL_DATA_A *dev_interface_details = NULL;
+ HDEVINFO dev_info = INVALID_HANDLE_VALUE;
+ SP_DEVINFO_DATA dev_info_data;
+ char* dev_path_no_guid = NULL;
+ char filter_path[] = "\\\\.\\libusb0-0000";
+ bool found_filter = false;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ // If the device is composite, but using the default Windows composite parent driver (usbccgp)
+ // or if it's the first WinUSB-like interface, we get a handle through Initialize().
+ if ((is_using_usbccgp) || (iface == 0)) {
+ // composite device (independent interfaces) or interface 0
+ file_handle = handle_priv->interface_handle[iface].dev_handle;
+ if ((file_handle == 0) || (file_handle == INVALID_HANDLE_VALUE)) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ if (!WinUSBX[sub_api].Initialize(file_handle, &winusb_handle)) {
+ handle_priv->interface_handle[iface].api_handle = INVALID_HANDLE_VALUE;
+ err = GetLastError();
+ switch(err) {
+ case ERROR_BAD_COMMAND:
+ // The device was disconnected
+ usbi_err(ctx, "could not access interface %d: %s", iface, windows_error_str(0));
+ return LIBUSB_ERROR_NO_DEVICE;
+ default:
+ // it may be that we're using the libusb0 filter driver.
+ // TODO: can we move this whole business into the K/0 DLL?
+ for (i = 0; ; i++) {
+ safe_free(dev_interface_details);
+ safe_free(dev_path_no_guid);
+ dev_interface_details = get_interface_details_filter(ctx, &dev_info, &dev_info_data, &GUID_DEVINTERFACE_LIBUSB0_FILTER, i, filter_path);
+ if ((found_filter) || (dev_interface_details == NULL)) {
+ break;
+ }
+ // ignore GUID part
+ dev_path_no_guid = sanitize_path(strtok(dev_interface_details->DevicePath, "{"));
+ if (safe_strncmp(dev_path_no_guid, priv->usb_interface[iface].path, safe_strlen(dev_path_no_guid)) == 0) {
+ file_handle = CreateFileA(filter_path, GENERIC_WRITE | GENERIC_READ, FILE_SHARE_WRITE | FILE_SHARE_READ,
+ NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OVERLAPPED, NULL);
+ if (file_handle == INVALID_HANDLE_VALUE) {
+ usbi_err(ctx, "could not open device %s: %s", filter_path, windows_error_str(0));
+ } else {
+ WinUSBX[sub_api].Free(winusb_handle);
+ if (WinUSBX[sub_api].Initialize(file_handle, &winusb_handle))
+ found_filter = true;
+ else
+ usbi_err(ctx, "could not initialize filter driver for %s", filter_path);
+ }
+ }
+ }
+ if (!found_filter) {
+ usbi_err(ctx, "could not access interface %d: %s", iface, windows_error_str(err));
+ return LIBUSB_ERROR_ACCESS;
+ }
+ }
+ }
+ handle_priv->interface_handle[iface].api_handle = winusb_handle;
+ } else {
+ // For all other interfaces, use GetAssociatedInterface()
+ winusb_handle = handle_priv->interface_handle[0].api_handle;
+ // It is a requirement for multiple interface devices on Windows that, to you
+ // must first claim the first interface before you claim the others
+ if ((winusb_handle == 0) || (winusb_handle == INVALID_HANDLE_VALUE)) {
+ file_handle = handle_priv->interface_handle[0].dev_handle;
+ if (WinUSBX[sub_api].Initialize(file_handle, &winusb_handle)) {
+ handle_priv->interface_handle[0].api_handle = winusb_handle;
+ usbi_warn(ctx, "auto-claimed interface 0 (required to claim %d with WinUSB)", iface);
+ } else {
+ usbi_warn(ctx, "failed to auto-claim interface 0 (required to claim %d with WinUSB): %s", iface, windows_error_str(0));
+ return LIBUSB_ERROR_ACCESS;
+ }
+ }
+ if (!WinUSBX[sub_api].GetAssociatedInterface(winusb_handle, (UCHAR)(iface-1),
+ &handle_priv->interface_handle[iface].api_handle)) {
+ handle_priv->interface_handle[iface].api_handle = INVALID_HANDLE_VALUE;
+ switch(GetLastError()) {
+ case ERROR_NO_MORE_ITEMS: // invalid iface
+ return LIBUSB_ERROR_NOT_FOUND;
+ case ERROR_BAD_COMMAND: // The device was disconnected
+ return LIBUSB_ERROR_NO_DEVICE;
+ case ERROR_ALREADY_EXISTS: // already claimed
+ return LIBUSB_ERROR_BUSY;
+ default:
+ usbi_err(ctx, "could not claim interface %d: %s", iface, windows_error_str(0));
+ return LIBUSB_ERROR_ACCESS;
+ }
+ }
+ }
+ usbi_dbg("claimed interface %d", iface);
+ handle_priv->active_interface = iface;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE winusb_handle;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ winusb_handle = handle_priv->interface_handle[iface].api_handle;
+ if ((winusb_handle == 0) || (winusb_handle == INVALID_HANDLE_VALUE)) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ WinUSBX[sub_api].Free(winusb_handle);
+ handle_priv->interface_handle[iface].api_handle = INVALID_HANDLE_VALUE;
+
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * Return the first valid interface (of the same API type), for control transfers
+ */
+static int get_valid_interface(struct libusb_device_handle *dev_handle, int api_id)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ int i;
+
+ if ((api_id < USB_API_WINUSBX) || (api_id > USB_API_HID)) {
+ usbi_dbg("unsupported API ID");
+ return -1;
+ }
+
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ if ( (handle_priv->interface_handle[i].dev_handle != 0)
+ && (handle_priv->interface_handle[i].dev_handle != INVALID_HANDLE_VALUE)
+ && (handle_priv->interface_handle[i].api_handle != 0)
+ && (handle_priv->interface_handle[i].api_handle != INVALID_HANDLE_VALUE)
+ && (priv->usb_interface[i].apib->id == api_id) ) {
+ return i;
+ }
+ }
+ return -1;
+}
+
+/*
+ * Lookup interface by endpoint address. -1 if not found
+ */
+static int interface_by_endpoint(struct windows_device_priv *priv,
+ struct windows_device_handle_priv *handle_priv, uint8_t endpoint_address)
+{
+ int i, j;
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ if (handle_priv->interface_handle[i].api_handle == INVALID_HANDLE_VALUE)
+ continue;
+ if (handle_priv->interface_handle[i].api_handle == 0)
+ continue;
+ if (priv->usb_interface[i].endpoint == NULL)
+ continue;
+ for (j=0; j<priv->usb_interface[i].nb_endpoints; j++) {
+ if (priv->usb_interface[i].endpoint[j] == endpoint_address) {
+ return i;
+ }
+ }
+ }
+ return -1;
+}
+
+static int winusbx_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(
+ transfer->dev_handle);
+ WINUSB_SETUP_PACKET *setup = (WINUSB_SETUP_PACKET *) transfer->buffer;
+ ULONG size;
+ HANDLE winusb_handle;
+ int current_interface;
+ struct winfd wfd;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ transfer_priv->pollable_fd = INVALID_WINFD;
+ size = transfer->length - LIBUSB_CONTROL_SETUP_SIZE;
+
+ if (size > MAX_CTRL_BUFFER_LENGTH)
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ current_interface = get_valid_interface(transfer->dev_handle, USB_API_WINUSBX);
+ if (current_interface < 0) {
+ if (auto_claim(transfer, ¤t_interface, USB_API_WINUSBX) != LIBUSB_SUCCESS) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+
+ usbi_dbg("will use interface %d", current_interface);
+ winusb_handle = handle_priv->interface_handle[current_interface].api_handle;
+
+ wfd = usbi_create_fd(winusb_handle, RW_READ, NULL, NULL);
+ // Always use the handle returned from usbi_create_fd (wfd.handle)
+ if (wfd.fd < 0) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // Sending of set configuration control requests from WinUSB creates issues
+ if ( ((setup->request_type & (0x03 << 5)) == LIBUSB_REQUEST_TYPE_STANDARD)
+ && (setup->request == LIBUSB_REQUEST_SET_CONFIGURATION) ) {
+ if (setup->value != priv->active_config) {
+ usbi_warn(ctx, "cannot set configuration other than the default one");
+ usbi_free_fd(&wfd);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ wfd.overlapped->Internal = STATUS_COMPLETED_SYNCHRONOUSLY;
+ wfd.overlapped->InternalHigh = 0;
+ } else {
+ if (!WinUSBX[sub_api].ControlTransfer(wfd.handle, *setup, transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE, size, NULL, wfd.overlapped)) {
+ if(GetLastError() != ERROR_IO_PENDING) {
+ usbi_warn(ctx, "ControlTransfer failed: %s", windows_error_str(0));
+ usbi_free_fd(&wfd);
+ return LIBUSB_ERROR_IO;
+ }
+ } else {
+ wfd.overlapped->Internal = STATUS_COMPLETED_SYNCHRONOUSLY;
+ wfd.overlapped->InternalHigh = (DWORD)size;
+ }
+ }
+
+ // Use priv_transfer to store data needed for async polling
+ transfer_priv->pollable_fd = wfd;
+ transfer_priv->interface_number = (uint8_t)current_interface;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE winusb_handle;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ if (altsetting > 255) {
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ winusb_handle = handle_priv->interface_handle[iface].api_handle;
+ if ((winusb_handle == 0) || (winusb_handle == INVALID_HANDLE_VALUE)) {
+ usbi_err(ctx, "interface must be claimed first");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ if (!WinUSBX[sub_api].SetCurrentAlternateSetting(winusb_handle, (UCHAR)altsetting)) {
+ usbi_err(ctx, "SetCurrentAlternateSetting failed: %s", windows_error_str(0));
+ return LIBUSB_ERROR_IO;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ HANDLE winusb_handle;
+ bool ret;
+ int current_interface;
+ struct winfd wfd;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ transfer_priv->pollable_fd = INVALID_WINFD;
+
+ current_interface = interface_by_endpoint(priv, handle_priv, transfer->endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cancelling transfer");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg("matched endpoint %02X with interface %d", transfer->endpoint, current_interface);
+
+ winusb_handle = handle_priv->interface_handle[current_interface].api_handle;
+
+ wfd = usbi_create_fd(winusb_handle, IS_XFERIN(transfer) ? RW_READ : RW_WRITE, NULL, NULL);
+ // Always use the handle returned from usbi_create_fd (wfd.handle)
+ if (wfd.fd < 0) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ if (IS_XFERIN(transfer)) {
+ usbi_dbg("reading %d bytes", transfer->length);
+ ret = WinUSBX[sub_api].ReadPipe(wfd.handle, transfer->endpoint, transfer->buffer, transfer->length, NULL, wfd.overlapped);
+ } else {
+ usbi_dbg("writing %d bytes", transfer->length);
+ ret = WinUSBX[sub_api].WritePipe(wfd.handle, transfer->endpoint, transfer->buffer, transfer->length, NULL, wfd.overlapped);
+ }
+ if (!ret) {
+ if(GetLastError() != ERROR_IO_PENDING) {
+ usbi_err(ctx, "ReadPipe/WritePipe failed: %s", windows_error_str(0));
+ usbi_free_fd(&wfd);
+ return LIBUSB_ERROR_IO;
+ }
+ } else {
+ wfd.overlapped->Internal = STATUS_COMPLETED_SYNCHRONOUSLY;
+ wfd.overlapped->InternalHigh = (DWORD)transfer->length;
+ }
+
+ transfer_priv->pollable_fd = wfd;
+ transfer_priv->interface_number = (uint8_t)current_interface;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE winusb_handle;
+ int current_interface;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ current_interface = interface_by_endpoint(priv, handle_priv, endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cannot clear");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg("matched endpoint %02X with interface %d", endpoint, current_interface);
+ winusb_handle = handle_priv->interface_handle[current_interface].api_handle;
+
+ if (!WinUSBX[sub_api].ResetPipe(winusb_handle, endpoint)) {
+ usbi_err(ctx, "ResetPipe failed: %s", windows_error_str(0));
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * from http://www.winvistatips.com/winusb-bugchecks-t335323.html (confirmed
+ * through testing as well):
+ * "You can not call WinUsb_AbortPipe on control pipe. You can possibly cancel
+ * the control transfer using CancelIo"
+ */
+static int winusbx_abort_control(int sub_api, struct usbi_transfer *itransfer)
+{
+ // Cancelling of the I/O is done in the parent
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_abort_transfers(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ HANDLE winusb_handle;
+ int current_interface;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ current_interface = transfer_priv->interface_number;
+ if ((current_interface < 0) || (current_interface >= USB_MAXINTERFACES)) {
+ usbi_err(ctx, "program assertion failed: invalid interface_number");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ usbi_dbg("will use interface %d", current_interface);
+
+ winusb_handle = handle_priv->interface_handle[current_interface].api_handle;
+
+ if (!WinUSBX[sub_api].AbortPipe(winusb_handle, transfer->endpoint)) {
+ usbi_err(ctx, "AbortPipe failed: %s", windows_error_str(0));
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+/*
+ * from the "How to Use WinUSB to Communicate with a USB Device" Microsoft white paper
+ * (http://www.microsoft.com/whdc/connect/usb/winusb_howto.mspx):
+ * "WinUSB does not support host-initiated reset port and cycle port operations" and
+ * IOCTL_INTERNAL_USB_CYCLE_PORT is only available in kernel mode and the
+ * IOCTL_USB_HUB_CYCLE_PORT ioctl was removed from Vista => the best we can do is
+ * cycle the pipes (and even then, the control pipe can not be reset using WinUSB)
+ */
+// TODO: (post hotplug): see if we can force eject the device and redetect it (reuse hotplug?)
+static int winusbx_reset_device(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct winfd wfd;
+ HANDLE winusb_handle;
+ int i, j;
+
+ CHECK_WINUSBX_AVAILABLE(sub_api);
+
+ // Reset any available pipe (except control)
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ winusb_handle = handle_priv->interface_handle[i].api_handle;
+ for (wfd = handle_to_winfd(winusb_handle); wfd.fd > 0;)
+ {
+ // Cancel any pollable I/O
+ usbi_remove_pollfd(ctx, wfd.fd);
+ usbi_free_fd(&wfd);
+ wfd = handle_to_winfd(winusb_handle);
+ }
+
+ if ( (winusb_handle != 0) && (winusb_handle != INVALID_HANDLE_VALUE)) {
+ for (j=0; j<priv->usb_interface[i].nb_endpoints; j++) {
+ usbi_dbg("resetting ep %02X", priv->usb_interface[i].endpoint[j]);
+ if (!WinUSBX[sub_api].AbortPipe(winusb_handle, priv->usb_interface[i].endpoint[j])) {
+ usbi_err(ctx, "AbortPipe (pipe address %02X) failed: %s",
+ priv->usb_interface[i].endpoint[j], windows_error_str(0));
+ }
+ // FlushPipe seems to fail on OUT pipes
+ if (IS_EPIN(priv->usb_interface[i].endpoint[j])
+ && (!WinUSBX[sub_api].FlushPipe(winusb_handle, priv->usb_interface[i].endpoint[j])) ) {
+ usbi_err(ctx, "FlushPipe (pipe address %02X) failed: %s",
+ priv->usb_interface[i].endpoint[j], windows_error_str(0));
+ }
+ if (!WinUSBX[sub_api].ResetPipe(winusb_handle, priv->usb_interface[i].endpoint[j])) {
+ usbi_err(ctx, "ResetPipe (pipe address %02X) failed: %s",
+ priv->usb_interface[i].endpoint[j], windows_error_str(0));
+ }
+ }
+ }
+ }
+
+ // libusbK & libusb0 have the ability to issue an actual device reset
+ if (WinUSBX[sub_api].ResetDevice != NULL) {
+ winusb_handle = handle_priv->interface_handle[0].api_handle;
+ if ( (winusb_handle != 0) && (winusb_handle != INVALID_HANDLE_VALUE)) {
+ WinUSBX[sub_api].ResetDevice(winusb_handle);
+ }
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int winusbx_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size)
+{
+ itransfer->transferred += io_size;
+ return LIBUSB_TRANSFER_COMPLETED;
+}
+
+/*
+ * Internal HID Support functions (from libusb-win32)
+ * Note that functions that complete data transfer synchronously must return
+ * LIBUSB_COMPLETED instead of LIBUSB_SUCCESS
+ */
+static int _hid_get_hid_descriptor(struct hid_device_priv* dev, void *data, size_t *size);
+static int _hid_get_report_descriptor(struct hid_device_priv* dev, void *data, size_t *size);
+
+static int _hid_wcslen(WCHAR *str)
+{
+ int i = 0;
+ while (str[i] && (str[i] != 0x409)) {
+ i++;
+ }
+ return i;
+}
+
+static int _hid_get_device_descriptor(struct hid_device_priv* dev, void *data, size_t *size)
+{
+ struct libusb_device_descriptor d;
+
+ d.bLength = LIBUSB_DT_DEVICE_SIZE;
+ d.bDescriptorType = LIBUSB_DT_DEVICE;
+ d.bcdUSB = 0x0200; /* 2.00 */
+ d.bDeviceClass = 0;
+ d.bDeviceSubClass = 0;
+ d.bDeviceProtocol = 0;
+ d.bMaxPacketSize0 = 64; /* fix this! */
+ d.idVendor = (uint16_t)dev->vid;
+ d.idProduct = (uint16_t)dev->pid;
+ d.bcdDevice = 0x0100;
+ d.iManufacturer = dev->string_index[0];
+ d.iProduct = dev->string_index[1];
+ d.iSerialNumber = dev->string_index[2];
+ d.bNumConfigurations = 1;
+
+ if (*size > LIBUSB_DT_DEVICE_SIZE)
+ *size = LIBUSB_DT_DEVICE_SIZE;
+ memcpy(data, &d, *size);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_get_config_descriptor(struct hid_device_priv* dev, void *data, size_t *size)
+{
+ char num_endpoints = 0;
+ size_t config_total_len = 0;
+ char tmp[HID_MAX_CONFIG_DESC_SIZE];
+ struct libusb_config_descriptor *cd;
+ struct libusb_interface_descriptor *id;
+ struct libusb_hid_descriptor *hd;
+ struct libusb_endpoint_descriptor *ed;
+ size_t tmp_size;
+
+ if (dev->input_report_size)
+ num_endpoints++;
+ if (dev->output_report_size)
+ num_endpoints++;
+
+ config_total_len = LIBUSB_DT_CONFIG_SIZE + LIBUSB_DT_INTERFACE_SIZE
+ + LIBUSB_DT_HID_SIZE + num_endpoints * LIBUSB_DT_ENDPOINT_SIZE;
+
+
+ cd = (struct libusb_config_descriptor *)tmp;
+ id = (struct libusb_interface_descriptor *)(tmp + LIBUSB_DT_CONFIG_SIZE);
+ hd = (struct libusb_hid_descriptor *)(tmp + LIBUSB_DT_CONFIG_SIZE
+ + LIBUSB_DT_INTERFACE_SIZE);
+ ed = (struct libusb_endpoint_descriptor *)(tmp + LIBUSB_DT_CONFIG_SIZE
+ + LIBUSB_DT_INTERFACE_SIZE
+ + LIBUSB_DT_HID_SIZE);
+
+ cd->bLength = LIBUSB_DT_CONFIG_SIZE;
+ cd->bDescriptorType = LIBUSB_DT_CONFIG;
+ cd->wTotalLength = (uint16_t) config_total_len;
+ cd->bNumInterfaces = 1;
+ cd->bConfigurationValue = 1;
+ cd->iConfiguration = 0;
+ cd->bmAttributes = 1 << 7; /* bus powered */
+ cd->MaxPower = 50;
+
+ id->bLength = LIBUSB_DT_INTERFACE_SIZE;
+ id->bDescriptorType = LIBUSB_DT_INTERFACE;
+ id->bInterfaceNumber = 0;
+ id->bAlternateSetting = 0;
+ id->bNumEndpoints = num_endpoints;
+ id->bInterfaceClass = 3;
+ id->bInterfaceSubClass = 0;
+ id->bInterfaceProtocol = 0;
+ id->iInterface = 0;
+
+ tmp_size = LIBUSB_DT_HID_SIZE;
+ _hid_get_hid_descriptor(dev, hd, &tmp_size);
+
+ if (dev->input_report_size) {
+ ed->bLength = LIBUSB_DT_ENDPOINT_SIZE;
+ ed->bDescriptorType = LIBUSB_DT_ENDPOINT;
+ ed->bEndpointAddress = HID_IN_EP;
+ ed->bmAttributes = 3;
+ ed->wMaxPacketSize = dev->input_report_size - 1;
+ ed->bInterval = 10;
+ ed = (struct libusb_endpoint_descriptor *)((char*)ed + LIBUSB_DT_ENDPOINT_SIZE);
+ }
+
+ if (dev->output_report_size) {
+ ed->bLength = LIBUSB_DT_ENDPOINT_SIZE;
+ ed->bDescriptorType = LIBUSB_DT_ENDPOINT;
+ ed->bEndpointAddress = HID_OUT_EP;
+ ed->bmAttributes = 3;
+ ed->wMaxPacketSize = dev->output_report_size - 1;
+ ed->bInterval = 10;
+ }
+
+ if (*size > config_total_len)
+ *size = config_total_len;
+ memcpy(data, tmp, *size);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_get_string_descriptor(struct hid_device_priv* dev, int _index,
+ void *data, size_t *size)
+{
+ void *tmp = NULL;
+ size_t tmp_size = 0;
+ int i;
+
+ /* language ID, EN-US */
+ char string_langid[] = {
+ 0x09,
+ 0x04
+ };
+
+ if ((*size < 2) || (*size > 255)) {
+ return LIBUSB_ERROR_OVERFLOW;
+ }
+
+ if (_index == 0) {
+ tmp = string_langid;
+ tmp_size = sizeof(string_langid)+2;
+ } else {
+ for (i=0; i<3; i++) {
+ if (_index == (dev->string_index[i])) {
+ tmp = dev->string[i];
+ tmp_size = (_hid_wcslen(dev->string[i])+1) * sizeof(WCHAR);
+ break;
+ }
+ }
+ if (i == 3) { // not found
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+ }
+
+ if(!tmp_size) {
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ if (tmp_size < *size) {
+ *size = tmp_size;
+ }
+ // 2 byte header
+ ((uint8_t*)data)[0] = (uint8_t)*size;
+ ((uint8_t*)data)[1] = LIBUSB_DT_STRING;
+ memcpy((uint8_t*)data+2, tmp, *size-2);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_get_hid_descriptor(struct hid_device_priv* dev, void *data, size_t *size)
+{
+ struct libusb_hid_descriptor d;
+ uint8_t tmp[MAX_HID_DESCRIPTOR_SIZE];
+ size_t report_len = MAX_HID_DESCRIPTOR_SIZE;
+
+ _hid_get_report_descriptor(dev, tmp, &report_len);
+
+ d.bLength = LIBUSB_DT_HID_SIZE;
+ d.bDescriptorType = LIBUSB_DT_HID;
+ d.bcdHID = 0x0110; /* 1.10 */
+ d.bCountryCode = 0;
+ d.bNumDescriptors = 1;
+ d.bClassDescriptorType = LIBUSB_DT_REPORT;
+ d.wClassDescriptorLength = (uint16_t)report_len;
+
+ if (*size > LIBUSB_DT_HID_SIZE)
+ *size = LIBUSB_DT_HID_SIZE;
+ memcpy(data, &d, *size);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_get_report_descriptor(struct hid_device_priv* dev, void *data, size_t *size)
+{
+ uint8_t d[MAX_HID_DESCRIPTOR_SIZE];
+ size_t i = 0;
+
+ /* usage page (0xFFA0 == vendor defined) */
+ d[i++] = 0x06; d[i++] = 0xA0; d[i++] = 0xFF;
+ /* usage (vendor defined) */
+ d[i++] = 0x09; d[i++] = 0x01;
+ /* start collection (application) */
+ d[i++] = 0xA1; d[i++] = 0x01;
+ /* input report */
+ if (dev->input_report_size) {
+ /* usage (vendor defined) */
+ d[i++] = 0x09; d[i++] = 0x01;
+ /* logical minimum (0) */
+ d[i++] = 0x15; d[i++] = 0x00;
+ /* logical maximum (255) */
+ d[i++] = 0x25; d[i++] = 0xFF;
+ /* report size (8 bits) */
+ d[i++] = 0x75; d[i++] = 0x08;
+ /* report count */
+ d[i++] = 0x95; d[i++] = (uint8_t)dev->input_report_size - 1;
+ /* input (data, variable, absolute) */
+ d[i++] = 0x81; d[i++] = 0x00;
+ }
+ /* output report */
+ if (dev->output_report_size) {
+ /* usage (vendor defined) */
+ d[i++] = 0x09; d[i++] = 0x02;
+ /* logical minimum (0) */
+ d[i++] = 0x15; d[i++] = 0x00;
+ /* logical maximum (255) */
+ d[i++] = 0x25; d[i++] = 0xFF;
+ /* report size (8 bits) */
+ d[i++] = 0x75; d[i++] = 0x08;
+ /* report count */
+ d[i++] = 0x95; d[i++] = (uint8_t)dev->output_report_size - 1;
+ /* output (data, variable, absolute) */
+ d[i++] = 0x91; d[i++] = 0x00;
+ }
+ /* feature report */
+ if (dev->feature_report_size) {
+ /* usage (vendor defined) */
+ d[i++] = 0x09; d[i++] = 0x03;
+ /* logical minimum (0) */
+ d[i++] = 0x15; d[i++] = 0x00;
+ /* logical maximum (255) */
+ d[i++] = 0x25; d[i++] = 0xFF;
+ /* report size (8 bits) */
+ d[i++] = 0x75; d[i++] = 0x08;
+ /* report count */
+ d[i++] = 0x95; d[i++] = (uint8_t)dev->feature_report_size - 1;
+ /* feature (data, variable, absolute) */
+ d[i++] = 0xb2; d[i++] = 0x02; d[i++] = 0x01;
+ }
+
+ /* end collection */
+ d[i++] = 0xC0;
+
+ if (*size > i)
+ *size = i;
+ memcpy(data, d, *size);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_get_descriptor(struct hid_device_priv* dev, HANDLE hid_handle, int recipient,
+ int type, int _index, void *data, size_t *size)
+{
+ switch(type) {
+ case LIBUSB_DT_DEVICE:
+ usbi_dbg("LIBUSB_DT_DEVICE");
+ return _hid_get_device_descriptor(dev, data, size);
+ case LIBUSB_DT_CONFIG:
+ usbi_dbg("LIBUSB_DT_CONFIG");
+ if (!_index)
+ return _hid_get_config_descriptor(dev, data, size);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case LIBUSB_DT_STRING:
+ usbi_dbg("LIBUSB_DT_STRING");
+ return _hid_get_string_descriptor(dev, _index, data, size);
+ case LIBUSB_DT_HID:
+ usbi_dbg("LIBUSB_DT_HID");
+ if (!_index)
+ return _hid_get_hid_descriptor(dev, data, size);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case LIBUSB_DT_REPORT:
+ usbi_dbg("LIBUSB_DT_REPORT");
+ if (!_index)
+ return _hid_get_report_descriptor(dev, data, size);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ case LIBUSB_DT_PHYSICAL:
+ usbi_dbg("LIBUSB_DT_PHYSICAL");
+ if (HidD_GetPhysicalDescriptor(hid_handle, data, (ULONG)*size))
+ return LIBUSB_COMPLETED;
+ return LIBUSB_ERROR_OTHER;
+ }
+ usbi_dbg("unsupported");
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+}
+
+static int _hid_get_report(struct hid_device_priv* dev, HANDLE hid_handle, int id, void *data,
+ struct windows_transfer_priv *tp, size_t *size, OVERLAPPED* overlapped,
+ int report_type)
+{
+ uint8_t *buf;
+ DWORD ioctl_code, read_size, expected_size = (DWORD)*size;
+ int r = LIBUSB_SUCCESS;
+
+ if (tp->hid_buffer != NULL) {
+ usbi_dbg("program assertion failed: hid_buffer is not NULL");
+ }
+
+ if ((*size == 0) || (*size > MAX_HID_REPORT_SIZE)) {
+ usbi_dbg("invalid size (%d)", *size);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ switch (report_type) {
+ case HID_REPORT_TYPE_INPUT:
+ ioctl_code = IOCTL_HID_GET_INPUT_REPORT;
+ break;
+ case HID_REPORT_TYPE_FEATURE:
+ ioctl_code = IOCTL_HID_GET_FEATURE;
+ break;
+ default:
+ usbi_dbg("unknown HID report type %d", report_type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ // Add a trailing byte to detect overflows
+ buf = (uint8_t*)calloc(expected_size+1, 1);
+ if (buf == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ buf[0] = (uint8_t)id; // Must be set always
+ usbi_dbg("report ID: 0x%02X", buf[0]);
+
+ tp->hid_expected_size = expected_size;
+ read_size = expected_size;
+
+ // NB: The size returned by DeviceIoControl doesn't include report IDs when not in use (0)
+ if (!DeviceIoControl(hid_handle, ioctl_code, buf, expected_size+1,
+ buf, expected_size+1, &read_size, overlapped)) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ usbi_dbg("Failed to Read HID Report: %s", windows_error_str(0));
+ safe_free(buf);
+ return LIBUSB_ERROR_IO;
+ }
+ // Asynchronous wait
+ tp->hid_buffer = buf;
+ tp->hid_dest = (uint8_t*)data; // copy dest, as not necessarily the start of the transfer buffer
+ return LIBUSB_SUCCESS;
+ }
+
+ // Transfer completed synchronously => copy and discard extra buffer
+ if (read_size == 0) {
+ usbi_warn(NULL, "program assertion failed - read completed synchronously, but no data was read");
+ *size = 0;
+ } else {
+ if (buf[0] != id) {
+ usbi_warn(NULL, "mismatched report ID (data is %02X, parameter is %02X)", buf[0], id);
+ }
+ if ((size_t)read_size > expected_size) {
+ r = LIBUSB_ERROR_OVERFLOW;
+ usbi_dbg("OVERFLOW!");
+ } else {
+ r = LIBUSB_COMPLETED;
+ }
+
+ *size = MIN((size_t)read_size, *size);
+ if (id == 0) {
+ // Discard report ID
+ memcpy(data, buf+1, *size);
+ } else {
+ memcpy(data, buf, *size);
+ }
+ }
+ safe_free(buf);
+ return r;
+}
+
+static int _hid_set_report(struct hid_device_priv* dev, HANDLE hid_handle, int id, void *data,
+ struct windows_transfer_priv *tp, size_t *size, OVERLAPPED* overlapped,
+ int report_type)
+{
+ uint8_t *buf = NULL;
+ DWORD ioctl_code, write_size= (DWORD)*size;
+
+ if (tp->hid_buffer != NULL) {
+ usbi_dbg("program assertion failed: hid_buffer is not NULL");
+ }
+
+ if ((*size == 0) || (*size > MAX_HID_REPORT_SIZE)) {
+ usbi_dbg("invalid size (%d)", *size);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ switch (report_type) {
+ case HID_REPORT_TYPE_OUTPUT:
+ ioctl_code = IOCTL_HID_SET_OUTPUT_REPORT;
+ break;
+ case HID_REPORT_TYPE_FEATURE:
+ ioctl_code = IOCTL_HID_SET_FEATURE;
+ break;
+ default:
+ usbi_dbg("unknown HID report type %d", report_type);
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ usbi_dbg("report ID: 0x%02X", id);
+ // When report IDs are not used (i.e. when id == 0), we must add
+ // a null report ID. Otherwise, we just use original data buffer
+ if (id == 0) {
+ write_size++;
+ }
+ buf = (uint8_t*) malloc(write_size);
+ if (buf == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ if (id == 0) {
+ buf[0] = 0;
+ memcpy(buf + 1, data, *size);
+ } else {
+ // This seems like a waste, but if we don't duplicate the
+ // data, we'll get issues when freeing hid_buffer
+ memcpy(buf, data, *size);
+ if (buf[0] != id) {
+ usbi_warn(NULL, "mismatched report ID (data is %02X, parameter is %02X)", buf[0], id);
+ }
+ }
+
+ // NB: The size returned by DeviceIoControl doesn't include report IDs when not in use (0)
+ if (!DeviceIoControl(hid_handle, ioctl_code, buf, write_size,
+ buf, write_size, &write_size, overlapped)) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ usbi_dbg("Failed to Write HID Output Report: %s", windows_error_str(0));
+ safe_free(buf);
+ return LIBUSB_ERROR_IO;
+ }
+ tp->hid_buffer = buf;
+ tp->hid_dest = NULL;
+ return LIBUSB_SUCCESS;
+ }
+
+ // Transfer completed synchronously
+ *size = write_size;
+ if (write_size == 0) {
+ usbi_dbg("program assertion failed - write completed synchronously, but no data was written");
+ }
+ safe_free(buf);
+ return LIBUSB_COMPLETED;
+}
+
+static int _hid_class_request(struct hid_device_priv* dev, HANDLE hid_handle, int request_type,
+ int request, int value, int _index, void *data, struct windows_transfer_priv *tp,
+ size_t *size, OVERLAPPED* overlapped)
+{
+ int report_type = (value >> 8) & 0xFF;
+ int report_id = value & 0xFF;
+
+ if ( (LIBUSB_REQ_RECIPIENT(request_type) != LIBUSB_RECIPIENT_INTERFACE)
+ && (LIBUSB_REQ_RECIPIENT(request_type) != LIBUSB_RECIPIENT_DEVICE) )
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ if (LIBUSB_REQ_OUT(request_type) && request == HID_REQ_SET_REPORT)
+ return _hid_set_report(dev, hid_handle, report_id, data, tp, size, overlapped, report_type);
+
+ if (LIBUSB_REQ_IN(request_type) && request == HID_REQ_GET_REPORT)
+ return _hid_get_report(dev, hid_handle, report_id, data, tp, size, overlapped, report_type);
+
+ return LIBUSB_ERROR_INVALID_PARAM;
+}
+
+
+/*
+ * HID API functions
+ */
+static int hid_init(int sub_api, struct libusb_context *ctx)
+{
+ DLL_LOAD(hid.dll, HidD_GetAttributes, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetHidGuid, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetPreparsedData, TRUE);
+ DLL_LOAD(hid.dll, HidD_FreePreparsedData, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetManufacturerString, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetProductString, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetSerialNumberString, TRUE);
+ DLL_LOAD(hid.dll, HidP_GetCaps, TRUE);
+ DLL_LOAD(hid.dll, HidD_SetNumInputBuffers, TRUE);
+ DLL_LOAD(hid.dll, HidD_SetFeature, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetFeature, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetPhysicalDescriptor, TRUE);
+ DLL_LOAD(hid.dll, HidD_GetInputReport, FALSE);
+ DLL_LOAD(hid.dll, HidD_SetOutputReport, FALSE);
+ DLL_LOAD(hid.dll, HidD_FlushQueue, TRUE);
+ DLL_LOAD(hid.dll, HidP_GetValueCaps, TRUE);
+
+ api_hid_available = true;
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_exit(int sub_api)
+{
+ return LIBUSB_SUCCESS;
+}
+
+// NB: open and close must ensure that they only handle interface of
+// the right API type, as these functions can be called wholesale from
+// composite_open(), with interfaces belonging to different APIs
+static int hid_open(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+
+ HIDD_ATTRIBUTES hid_attributes;
+ PHIDP_PREPARSED_DATA preparsed_data = NULL;
+ HIDP_CAPS capabilities;
+ HIDP_VALUE_CAPS *value_caps;
+
+ HANDLE hid_handle = INVALID_HANDLE_VALUE;
+ int i, j;
+ // report IDs handling
+ ULONG size[3];
+ const char* type[3] = {"input", "output", "feature"};
+ int nb_ids[2]; // zero and nonzero report IDs
+
+ CHECK_HID_AVAILABLE;
+ if (priv->hid == NULL) {
+ usbi_err(ctx, "program assertion failed - private HID structure is unitialized");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if ( (priv->usb_interface[i].path != NULL)
+ && (priv->usb_interface[i].apib->id == USB_API_HID) ) {
+ hid_handle = CreateFileA(priv->usb_interface[i].path, GENERIC_WRITE | GENERIC_READ, FILE_SHARE_WRITE | FILE_SHARE_READ,
+ NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OVERLAPPED, NULL);
+ /*
+ * http://www.lvr.com/hidfaq.htm: Why do I receive "Access denied" when attempting to access my HID?
+ * "Windows 2000 and later have exclusive read/write access to HIDs that are configured as a system
+ * keyboards or mice. An application can obtain a handle to a system keyboard or mouse by not
+ * requesting READ or WRITE access with CreateFile. Applications can then use HidD_SetFeature and
+ * HidD_GetFeature (if the device supports Feature reports)."
+ */
+ if (hid_handle == INVALID_HANDLE_VALUE) {
+ usbi_warn(ctx, "could not open HID device in R/W mode (keyboard or mouse?) - trying without");
+ hid_handle = CreateFileA(priv->usb_interface[i].path, 0, FILE_SHARE_WRITE | FILE_SHARE_READ,
+ NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_OVERLAPPED, NULL);
+ if (hid_handle == INVALID_HANDLE_VALUE) {
+ usbi_err(ctx, "could not open device %s (interface %d): %s", priv->path, i, windows_error_str(0));
+ switch(GetLastError()) {
+ case ERROR_FILE_NOT_FOUND: // The device was disconnected
+ return LIBUSB_ERROR_NO_DEVICE;
+ case ERROR_ACCESS_DENIED:
+ return LIBUSB_ERROR_ACCESS;
+ default:
+ return LIBUSB_ERROR_IO;
+ }
+ }
+ priv->usb_interface[i].restricted_functionality = true;
+ }
+ handle_priv->interface_handle[i].api_handle = hid_handle;
+ }
+ }
+
+ hid_attributes.Size = sizeof(hid_attributes);
+ do {
+ if (!HidD_GetAttributes(hid_handle, &hid_attributes)) {
+ usbi_err(ctx, "could not gain access to HID top collection (HidD_GetAttributes)");
+ break;
+ }
+
+ priv->hid->vid = hid_attributes.VendorID;
+ priv->hid->pid = hid_attributes.ProductID;
+
+ // Set the maximum available input buffer size
+ for (i=32; HidD_SetNumInputBuffers(hid_handle, i); i*=2);
+ usbi_dbg("set maximum input buffer size to %d", i/2);
+
+ // Get the maximum input and output report size
+ if (!HidD_GetPreparsedData(hid_handle, &preparsed_data) || !preparsed_data) {
+ usbi_err(ctx, "could not read HID preparsed data (HidD_GetPreparsedData)");
+ break;
+ }
+ if (HidP_GetCaps(preparsed_data, &capabilities) != HIDP_STATUS_SUCCESS) {
+ usbi_err(ctx, "could not parse HID capabilities (HidP_GetCaps)");
+ break;
+ }
+
+ // Find out if interrupt will need report IDs
+ size[0] = capabilities.NumberInputValueCaps;
+ size[1] = capabilities.NumberOutputValueCaps;
+ size[2] = capabilities.NumberFeatureValueCaps;
+ for (j=HidP_Input; j<=HidP_Feature; j++) {
+ usbi_dbg("%d HID %s report value(s) found", size[j], type[j]);
+ priv->hid->uses_report_ids[j] = false;
+ if (size[j] > 0) {
+ value_caps = (HIDP_VALUE_CAPS*) calloc(size[j], sizeof(HIDP_VALUE_CAPS));
+ if ( (value_caps != NULL)
+ && (HidP_GetValueCaps((HIDP_REPORT_TYPE)j, value_caps, &size[j], preparsed_data) == HIDP_STATUS_SUCCESS)
+ && (size[j] >= 1) ) {
+ nb_ids[0] = 0;
+ nb_ids[1] = 0;
+ for (i=0; i<(int)size[j]; i++) {
+ usbi_dbg(" Report ID: 0x%02X", value_caps[i].ReportID);
+ if (value_caps[i].ReportID != 0) {
+ nb_ids[1]++;
+ } else {
+ nb_ids[0]++;
+ }
+ }
+ if (nb_ids[1] != 0) {
+ if (nb_ids[0] != 0) {
+ usbi_warn(ctx, "program assertion failed: zero and nonzero report IDs used for %s",
+ type[j]);
+ }
+ priv->hid->uses_report_ids[j] = true;
+ }
+ } else {
+ usbi_warn(ctx, " could not process %s report IDs", type[j]);
+ }
+ safe_free(value_caps);
+ }
+ }
+
+ // Set the report sizes
+ priv->hid->input_report_size = capabilities.InputReportByteLength;
+ priv->hid->output_report_size = capabilities.OutputReportByteLength;
+ priv->hid->feature_report_size = capabilities.FeatureReportByteLength;
+
+ // Fetch string descriptors
+ priv->hid->string_index[0] = priv->dev_descriptor.iManufacturer;
+ if (priv->hid->string_index[0] != 0) {
+ HidD_GetManufacturerString(hid_handle, priv->hid->string[0],
+ sizeof(priv->hid->string[0]));
+ } else {
+ priv->hid->string[0][0] = 0;
+ }
+ priv->hid->string_index[1] = priv->dev_descriptor.iProduct;
+ if (priv->hid->string_index[1] != 0) {
+ HidD_GetProductString(hid_handle, priv->hid->string[1],
+ sizeof(priv->hid->string[1]));
+ } else {
+ priv->hid->string[1][0] = 0;
+ }
+ priv->hid->string_index[2] = priv->dev_descriptor.iSerialNumber;
+ if (priv->hid->string_index[2] != 0) {
+ HidD_GetSerialNumberString(hid_handle, priv->hid->string[2],
+ sizeof(priv->hid->string[2]));
+ } else {
+ priv->hid->string[2][0] = 0;
+ }
+ } while(0);
+
+ if (preparsed_data) {
+ HidD_FreePreparsedData(preparsed_data);
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static void hid_close(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ HANDLE file_handle;
+ int i;
+
+ if (!api_hid_available)
+ return;
+
+ for (i = 0; i < USB_MAXINTERFACES; i++) {
+ if (priv->usb_interface[i].apib->id == USB_API_HID) {
+ file_handle = handle_priv->interface_handle[i].api_handle;
+ if ( (file_handle != 0) && (file_handle != INVALID_HANDLE_VALUE)) {
+ CloseHandle(file_handle);
+ }
+ }
+ }
+}
+
+static int hid_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ CHECK_HID_AVAILABLE;
+
+ // NB: Disconnection detection is not possible in this function
+ if (priv->usb_interface[iface].path == NULL) {
+ return LIBUSB_ERROR_NOT_FOUND; // invalid iface
+ }
+
+ // We use dev_handle as a flag for interface claimed
+ if (handle_priv->interface_handle[iface].dev_handle == INTERFACE_CLAIMED) {
+ return LIBUSB_ERROR_BUSY; // already claimed
+ }
+
+ handle_priv->interface_handle[iface].dev_handle = INTERFACE_CLAIMED;
+
+ usbi_dbg("claimed interface %d", iface);
+ handle_priv->active_interface = iface;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+
+ CHECK_HID_AVAILABLE;
+
+ if (priv->usb_interface[iface].path == NULL) {
+ return LIBUSB_ERROR_NOT_FOUND; // invalid iface
+ }
+
+ if (handle_priv->interface_handle[iface].dev_handle != INTERFACE_CLAIMED) {
+ return LIBUSB_ERROR_NOT_FOUND; // invalid iface
+ }
+
+ handle_priv->interface_handle[iface].dev_handle = INVALID_HANDLE_VALUE;
+
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+
+ CHECK_HID_AVAILABLE;
+
+ if (altsetting > 255) {
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ if (altsetting != 0) {
+ usbi_err(ctx, "set interface altsetting not supported for altsetting >0");
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ WINUSB_SETUP_PACKET *setup = (WINUSB_SETUP_PACKET *) transfer->buffer;
+ HANDLE hid_handle;
+ struct winfd wfd;
+ int current_interface, config;
+ size_t size;
+ int r = LIBUSB_ERROR_INVALID_PARAM;
+
+ CHECK_HID_AVAILABLE;
+
+ transfer_priv->pollable_fd = INVALID_WINFD;
+ safe_free(transfer_priv->hid_buffer);
+ transfer_priv->hid_dest = NULL;
+ size = transfer->length - LIBUSB_CONTROL_SETUP_SIZE;
+
+ if (size > MAX_CTRL_BUFFER_LENGTH) {
+ return LIBUSB_ERROR_INVALID_PARAM;
+ }
+
+ current_interface = get_valid_interface(transfer->dev_handle, USB_API_HID);
+ if (current_interface < 0) {
+ if (auto_claim(transfer, ¤t_interface, USB_API_HID) != LIBUSB_SUCCESS) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+ }
+
+ usbi_dbg("will use interface %d", current_interface);
+ hid_handle = handle_priv->interface_handle[current_interface].api_handle;
+ // Always use the handle returned from usbi_create_fd (wfd.handle)
+ wfd = usbi_create_fd(hid_handle, RW_READ, NULL, NULL);
+ if (wfd.fd < 0) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ switch(LIBUSB_REQ_TYPE(setup->request_type)) {
+ case LIBUSB_REQUEST_TYPE_STANDARD:
+ switch(setup->request) {
+ case LIBUSB_REQUEST_GET_DESCRIPTOR:
+ r = _hid_get_descriptor(priv->hid, wfd.handle, LIBUSB_REQ_RECIPIENT(setup->request_type),
+ (setup->value >> 8) & 0xFF, setup->value & 0xFF, transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE, &size);
+ break;
+ case LIBUSB_REQUEST_GET_CONFIGURATION:
+ r = windows_get_configuration(transfer->dev_handle, &config);
+ if (r == LIBUSB_SUCCESS) {
+ size = 1;
+ ((uint8_t*)transfer->buffer)[LIBUSB_CONTROL_SETUP_SIZE] = (uint8_t)config;
+ r = LIBUSB_COMPLETED;
+ }
+ break;
+ case LIBUSB_REQUEST_SET_CONFIGURATION:
+ if (setup->value == priv->active_config) {
+ r = LIBUSB_COMPLETED;
+ } else {
+ usbi_warn(ctx, "cannot set configuration other than the default one");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ }
+ break;
+ case LIBUSB_REQUEST_GET_INTERFACE:
+ size = 1;
+ ((uint8_t*)transfer->buffer)[LIBUSB_CONTROL_SETUP_SIZE] = 0;
+ r = LIBUSB_COMPLETED;
+ break;
+ case LIBUSB_REQUEST_SET_INTERFACE:
+ r = hid_set_interface_altsetting(0, transfer->dev_handle, setup->index, setup->value);
+ if (r == LIBUSB_SUCCESS) {
+ r = LIBUSB_COMPLETED;
+ }
+ break;
+ default:
+ usbi_warn(ctx, "unsupported HID control request");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+ break;
+ case LIBUSB_REQUEST_TYPE_CLASS:
+ r =_hid_class_request(priv->hid, wfd.handle, setup->request_type, setup->request, setup->value,
+ setup->index, transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE, transfer_priv,
+ &size, wfd.overlapped);
+ break;
+ default:
+ usbi_warn(ctx, "unsupported HID control request");
+ r = LIBUSB_ERROR_NOT_SUPPORTED;
+ break;
+ }
+
+ if (r == LIBUSB_COMPLETED) {
+ // Force request to be completed synchronously. Transferred size has been set by previous call
+ wfd.overlapped->Internal = STATUS_COMPLETED_SYNCHRONOUSLY;
+ // http://msdn.microsoft.com/en-us/library/ms684342%28VS.85%29.aspx
+ // set InternalHigh to the number of bytes transferred
+ wfd.overlapped->InternalHigh = (DWORD)size;
+ r = LIBUSB_SUCCESS;
+ }
+
+ if (r == LIBUSB_SUCCESS) {
+ // Use priv_transfer to store data needed for async polling
+ transfer_priv->pollable_fd = wfd;
+ transfer_priv->interface_number = (uint8_t)current_interface;
+ } else {
+ usbi_free_fd(&wfd);
+ }
+
+ return r;
+}
+
+static int hid_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ struct winfd wfd;
+ HANDLE hid_handle;
+ bool direction_in, ret;
+ int current_interface, length;
+ DWORD size;
+ int r = LIBUSB_SUCCESS;
+
+ CHECK_HID_AVAILABLE;
+
+ transfer_priv->pollable_fd = INVALID_WINFD;
+ transfer_priv->hid_dest = NULL;
+ safe_free(transfer_priv->hid_buffer);
+
+ current_interface = interface_by_endpoint(priv, handle_priv, transfer->endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cancelling transfer");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg("matched endpoint %02X with interface %d", transfer->endpoint, current_interface);
+
+ hid_handle = handle_priv->interface_handle[current_interface].api_handle;
+ direction_in = transfer->endpoint & LIBUSB_ENDPOINT_IN;
+
+ wfd = usbi_create_fd(hid_handle, direction_in?RW_READ:RW_WRITE, NULL, NULL);
+ // Always use the handle returned from usbi_create_fd (wfd.handle)
+ if (wfd.fd < 0) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ // If report IDs are not in use, an extra prefix byte must be added
+ if ( ((direction_in) && (!priv->hid->uses_report_ids[0]))
+ || ((!direction_in) && (!priv->hid->uses_report_ids[1])) ) {
+ length = transfer->length+1;
+ } else {
+ length = transfer->length;
+ }
+ // Add a trailing byte to detect overflows on input
+ transfer_priv->hid_buffer = (uint8_t*)calloc(length+1, 1);
+ if (transfer_priv->hid_buffer == NULL) {
+ return LIBUSB_ERROR_NO_MEM;
+ }
+ transfer_priv->hid_expected_size = length;
+
+ if (direction_in) {
+ transfer_priv->hid_dest = transfer->buffer;
+ usbi_dbg("reading %d bytes (report ID: 0x00)", length);
+ ret = ReadFile(wfd.handle, transfer_priv->hid_buffer, length+1, &size, wfd.overlapped);
+ } else {
+ if (!priv->hid->uses_report_ids[1]) {
+ memcpy(transfer_priv->hid_buffer+1, transfer->buffer, transfer->length);
+ } else {
+ // We could actually do without the calloc and memcpy in this case
+ memcpy(transfer_priv->hid_buffer, transfer->buffer, transfer->length);
+ }
+ usbi_dbg("writing %d bytes (report ID: 0x%02X)", length, transfer_priv->hid_buffer[0]);
+ ret = WriteFile(wfd.handle, transfer_priv->hid_buffer, length, &size, wfd.overlapped);
+ }
+ if (!ret) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ usbi_err(ctx, "HID transfer failed: %s", windows_error_str(0));
+ usbi_free_fd(&wfd);
+ safe_free(transfer_priv->hid_buffer);
+ return LIBUSB_ERROR_IO;
+ }
+ } else {
+ // Only write operations that completed synchronously need to free up
+ // hid_buffer. For reads, copy_transfer_data() handles that process.
+ if (!direction_in) {
+ safe_free(transfer_priv->hid_buffer);
+ }
+ if (size == 0) {
+ usbi_err(ctx, "program assertion failed - no data was transferred");
+ size = 1;
+ }
+ if (size > (size_t)length) {
+ usbi_err(ctx, "OVERFLOW!");
+ r = LIBUSB_ERROR_OVERFLOW;
+ }
+ wfd.overlapped->Internal = STATUS_COMPLETED_SYNCHRONOUSLY;
+ wfd.overlapped->InternalHigh = size;
+ }
+
+ transfer_priv->pollable_fd = wfd;
+ transfer_priv->interface_number = (uint8_t)current_interface;
+
+ return r;
+}
+
+static int hid_abort_transfers(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = (struct windows_transfer_priv*)usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ HANDLE hid_handle;
+ int current_interface;
+
+ CHECK_HID_AVAILABLE;
+
+ current_interface = transfer_priv->interface_number;
+ hid_handle = handle_priv->interface_handle[current_interface].api_handle;
+ CancelIo(hid_handle);
+
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_reset_device(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ HANDLE hid_handle;
+ int current_interface;
+
+ CHECK_HID_AVAILABLE;
+
+ // Flushing the queues on all interfaces is the best we can achieve
+ for (current_interface = 0; current_interface < USB_MAXINTERFACES; current_interface++) {
+ hid_handle = handle_priv->interface_handle[current_interface].api_handle;
+ if ((hid_handle != 0) && (hid_handle != INVALID_HANDLE_VALUE)) {
+ HidD_FlushQueue(hid_handle);
+ }
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int hid_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ HANDLE hid_handle;
+ int current_interface;
+
+ CHECK_HID_AVAILABLE;
+
+ current_interface = interface_by_endpoint(priv, handle_priv, endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cannot clear");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_dbg("matched endpoint %02X with interface %d", endpoint, current_interface);
+ hid_handle = handle_priv->interface_handle[current_interface].api_handle;
+
+ // No endpoint selection with Microsoft's implementation, so we try to flush the
+ // whole interface. Should be OK for most case scenarios
+ if (!HidD_FlushQueue(hid_handle)) {
+ usbi_err(ctx, "Flushing of HID queue failed: %s", windows_error_str(0));
+ // Device was probably disconnected
+ return LIBUSB_ERROR_NO_DEVICE;
+ }
+
+ return LIBUSB_SUCCESS;
+}
+
+// This extra function is only needed for HID
+static int hid_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_transfer_priv *transfer_priv = usbi_transfer_get_os_priv(itransfer);
+ int r = LIBUSB_TRANSFER_COMPLETED;
+ uint32_t corrected_size = io_size;
+
+ if (transfer_priv->hid_buffer != NULL) {
+ // If we have a valid hid_buffer, it means the transfer was async
+ if (transfer_priv->hid_dest != NULL) { // Data readout
+ if (corrected_size > 0) {
+ // First, check for overflow
+ if (corrected_size > transfer_priv->hid_expected_size) {
+ usbi_err(ctx, "OVERFLOW!");
+ corrected_size = (uint32_t)transfer_priv->hid_expected_size;
+ r = LIBUSB_TRANSFER_OVERFLOW;
+ }
+
+ if (transfer_priv->hid_buffer[0] == 0) {
+ // Discard the 1 byte report ID prefix
+ corrected_size--;
+ memcpy(transfer_priv->hid_dest, transfer_priv->hid_buffer+1, corrected_size);
+ } else {
+ memcpy(transfer_priv->hid_dest, transfer_priv->hid_buffer, corrected_size);
+ }
+ }
+ transfer_priv->hid_dest = NULL;
+ }
+ // For write, we just need to free the hid buffer
+ safe_free(transfer_priv->hid_buffer);
+ }
+ itransfer->transferred += corrected_size;
+ return r;
+}
+
+
+/*
+ * Composite API functions
+ */
+static int composite_init(int sub_api, struct libusb_context *ctx)
+{
+ return LIBUSB_SUCCESS;
+}
+
+static int composite_exit(int sub_api)
+{
+ return LIBUSB_SUCCESS;
+}
+
+static int composite_open(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ int r = LIBUSB_ERROR_NOT_FOUND;
+ uint8_t i;
+ // SUB_API_MAX+1 as the SUB_API_MAX pos is used to indicate availability of HID
+ bool available[SUB_API_MAX+1] = {0};
+
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ switch (priv->usb_interface[i].apib->id) {
+ case USB_API_WINUSBX:
+ if (priv->usb_interface[i].sub_api != SUB_API_NOTSET)
+ available[priv->usb_interface[i].sub_api] = true;
+ break;
+ case USB_API_HID:
+ available[SUB_API_MAX] = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i=0; i<SUB_API_MAX; i++) { // WinUSB-like drivers
+ if (available[i]) {
+ r = usb_api_backend[USB_API_WINUSBX].open(i, dev_handle);
+ if (r != LIBUSB_SUCCESS) {
+ return r;
+ }
+ }
+ }
+ if (available[SUB_API_MAX]) { // HID driver
+ r = hid_open(SUB_API_NOTSET, dev_handle);
+ }
+ return r;
+}
+
+static void composite_close(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ uint8_t i;
+ // SUB_API_MAX+1 as the SUB_API_MAX pos is used to indicate availability of HID
+ bool available[SUB_API_MAX+1] = {0};
+
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ switch (priv->usb_interface[i].apib->id) {
+ case USB_API_WINUSBX:
+ if (priv->usb_interface[i].sub_api != SUB_API_NOTSET)
+ available[priv->usb_interface[i].sub_api] = true;
+ break;
+ case USB_API_HID:
+ available[SUB_API_MAX] = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i=0; i<SUB_API_MAX; i++) { // WinUSB-like drivers
+ if (available[i]) {
+ usb_api_backend[USB_API_WINUSBX].close(i, dev_handle);
+ }
+ }
+ if (available[SUB_API_MAX]) { // HID driver
+ hid_close(SUB_API_NOTSET, dev_handle);
+ }
+}
+
+static int composite_claim_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ return priv->usb_interface[iface].apib->
+ claim_interface(priv->usb_interface[iface].sub_api, dev_handle, iface);
+}
+
+static int composite_set_interface_altsetting(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ return priv->usb_interface[iface].apib->
+ set_interface_altsetting(priv->usb_interface[iface].sub_api, dev_handle, iface, altsetting);
+}
+
+static int composite_release_interface(int sub_api, struct libusb_device_handle *dev_handle, int iface)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ return priv->usb_interface[iface].apib->
+ release_interface(priv->usb_interface[iface].sub_api, dev_handle, iface);
+}
+
+static int composite_submit_control_transfer(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ struct libusb_config_descriptor *conf_desc;
+ WINUSB_SETUP_PACKET *setup = (WINUSB_SETUP_PACKET *) transfer->buffer;
+ int iface, pass, r;
+
+ // Interface shouldn't matter for control, but it does in practice, with Windows'
+ // restrictions with regards to accessing HID keyboards and mice. Try to target
+ // a specific interface first, if possible.
+ switch (LIBUSB_REQ_RECIPIENT(setup->request_type)) {
+ case LIBUSB_RECIPIENT_INTERFACE:
+ iface = setup->index & 0xFF;
+ break;
+ case LIBUSB_RECIPIENT_ENDPOINT:
+ r = libusb_get_config_descriptor(transfer->dev_handle->dev, (uint8_t)(priv->active_config-1), &conf_desc);
+ if (r == LIBUSB_SUCCESS) {
+ iface = get_interface_by_endpoint(conf_desc, (setup->index & 0xFF));
+ libusb_free_config_descriptor(conf_desc);
+ break;
+ }
+ // Fall through if not able to determine interface
+ default:
+ iface = -1;
+ break;
+ }
+
+ // Try and target a specific interface if the control setup indicates such
+ if ((iface >= 0) && (iface < USB_MAXINTERFACES)) {
+ usbi_dbg("attempting control transfer targeted to interface %d", iface);
+ if (priv->usb_interface[iface].path != NULL) {
+ r = priv->usb_interface[iface].apib->submit_control_transfer(priv->usb_interface[iface].sub_api, itransfer);
+ if (r == LIBUSB_SUCCESS) {
+ return r;
+ }
+ }
+ }
+
+ // Either not targeted to a specific interface or no luck in doing so.
+ // Try a 2 pass approach with all interfaces.
+ for (pass = 0; pass < 2; pass++) {
+ for (iface = 0; iface < USB_MAXINTERFACES; iface++) {
+ if (priv->usb_interface[iface].path != NULL) {
+ if ((pass == 0) && (priv->usb_interface[iface].restricted_functionality)) {
+ usbi_dbg("trying to skip restricted interface #%d (HID keyboard or mouse?)", iface);
+ continue;
+ }
+ usbi_dbg("using interface %d", iface);
+ r = priv->usb_interface[iface].apib->submit_control_transfer(priv->usb_interface[iface].sub_api, itransfer);
+ // If not supported on this API, it may be supported on another, so don't give up yet!!
+ if (r == LIBUSB_ERROR_NOT_SUPPORTED) {
+ continue;
+ }
+ return r;
+ }
+ }
+ }
+
+ usbi_err(ctx, "no libusb supported interfaces to complete request");
+ return LIBUSB_ERROR_NOT_FOUND;
+}
+
+static int composite_submit_bulk_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int current_interface;
+
+ current_interface = interface_by_endpoint(priv, handle_priv, transfer->endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cancelling transfer");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ return priv->usb_interface[current_interface].apib->
+ submit_bulk_transfer(priv->usb_interface[current_interface].sub_api, itransfer);}
+
+static int composite_submit_iso_transfer(int sub_api, struct usbi_transfer *itransfer) {
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct libusb_context *ctx = DEVICE_CTX(transfer->dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(transfer->dev_handle);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+ int current_interface;
+
+ current_interface = interface_by_endpoint(priv, handle_priv, transfer->endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cancelling transfer");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ return priv->usb_interface[current_interface].apib->
+ submit_iso_transfer(priv->usb_interface[current_interface].sub_api, itransfer);}
+
+static int composite_clear_halt(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint)
+{
+ struct libusb_context *ctx = DEVICE_CTX(dev_handle->dev);
+ struct windows_device_handle_priv *handle_priv = _device_handle_priv(dev_handle);
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ int current_interface;
+
+ current_interface = interface_by_endpoint(priv, handle_priv, endpoint);
+ if (current_interface < 0) {
+ usbi_err(ctx, "unable to match endpoint to an open interface - cannot clear");
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ return priv->usb_interface[current_interface].apib->
+ clear_halt(priv->usb_interface[current_interface].sub_api, dev_handle, endpoint);}
+
+static int composite_abort_control(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+
+ return priv->usb_interface[transfer_priv->interface_number].apib->
+ abort_control(priv->usb_interface[transfer_priv->interface_number].sub_api, itransfer);}
+
+static int composite_abort_transfers(int sub_api, struct usbi_transfer *itransfer)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+
+ return priv->usb_interface[transfer_priv->interface_number].apib->
+ abort_transfers(priv->usb_interface[transfer_priv->interface_number].sub_api, itransfer);}
+
+static int composite_reset_device(int sub_api, struct libusb_device_handle *dev_handle)
+{
+ struct windows_device_priv *priv = _device_priv(dev_handle->dev);
+ int r;
+ uint8_t i;
+ bool available[SUB_API_MAX];
+ for (i = 0; i<SUB_API_MAX; i++) {
+ available[i] = false;
+ }
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ if ( (priv->usb_interface[i].apib->id == USB_API_WINUSBX)
+ && (priv->usb_interface[i].sub_api != SUB_API_NOTSET) ) {
+ available[priv->usb_interface[i].sub_api] = true;
+ }
+ }
+ for (i=0; i<SUB_API_MAX; i++) {
+ if (available[i]) {
+ r = usb_api_backend[USB_API_WINUSBX].reset_device(i, dev_handle);
+ if (r != LIBUSB_SUCCESS) {
+ return r;
+ }
+ }
+ }
+ return LIBUSB_SUCCESS;
+}
+
+static int composite_copy_transfer_data(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size)
+{
+ struct libusb_transfer *transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ struct windows_transfer_priv *transfer_priv = usbi_transfer_get_os_priv(itransfer);
+ struct windows_device_priv *priv = _device_priv(transfer->dev_handle->dev);
+
+ return priv->usb_interface[transfer_priv->interface_number].apib->
+ copy_transfer_data(priv->usb_interface[transfer_priv->interface_number].sub_api, itransfer, io_size);
+}
--- /dev/null
+/*
+ * Windows backend for libusb 1.0
+ * Copyright © 2009-2012 Pete Batard <pete@akeo.ie>
+ * With contributions from Michael Plante, Orin Eman et al.
+ * Parts of this code adapted from libusb-win32-v1 by Stephan Meyer
+ * Major code testing contribution by Xiaofan Chen
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#pragma once
+
+#include "windows_common.h"
+
+#if defined(_MSC_VER)
+// disable /W4 MSVC warnings that are benign
+#pragma warning(disable:4100) // unreferenced formal parameter
+#pragma warning(disable:4127) // conditional expression is constant
+#pragma warning(disable:4201) // nameless struct/union
+#pragma warning(disable:4214) // bit field types other than int
+#pragma warning(disable:4996) // deprecated API calls
+#pragma warning(disable:28159) // more deprecated API calls
+#endif
+
+// Missing from MSVC6 setupapi.h
+#if !defined(SPDRP_ADDRESS)
+#define SPDRP_ADDRESS 28
+#endif
+#if !defined(SPDRP_INSTALL_STATE)
+#define SPDRP_INSTALL_STATE 34
+#endif
+
+// Missing from MinGW
+#if !defined(FACILITY_SETUPAPI)
+#define FACILITY_SETUPAPI 15
+#endif
+
+#if defined(__CYGWIN__ )
+#define _stricmp stricmp
+#define _snprintf snprintf
+#define _strdup strdup
+// _beginthreadex is MSVCRT => unavailable for cygwin. Fallback to using CreateThread
+#define _beginthreadex(a, b, c, d, e, f) CreateThread(a, b, (LPTHREAD_START_ROUTINE)c, d, e, f)
+#endif
+
+#define MAX_CTRL_BUFFER_LENGTH 4096
+#define MAX_USB_DEVICES 256
+#define MAX_USB_STRING_LENGTH 128
+#define MAX_HID_REPORT_SIZE 1024
+#define MAX_HID_DESCRIPTOR_SIZE 256
+#define MAX_GUID_STRING_LENGTH 40
+#define MAX_PATH_LENGTH 128
+#define MAX_KEY_LENGTH 256
+#define LIST_SEPARATOR ';'
+#define HTAB_SIZE 1021
+
+// Handle code for HID interface that have been claimed ("dibs")
+#define INTERFACE_CLAIMED ((HANDLE)(intptr_t)0xD1B5)
+// Additional return code for HID operations that completed synchronously
+#define LIBUSB_COMPLETED (LIBUSB_SUCCESS + 1)
+
+// http://msdn.microsoft.com/en-us/library/ff545978.aspx
+// http://msdn.microsoft.com/en-us/library/ff545972.aspx
+// http://msdn.microsoft.com/en-us/library/ff545982.aspx
+#if !defined(GUID_DEVINTERFACE_USB_HOST_CONTROLLER)
+const GUID GUID_DEVINTERFACE_USB_HOST_CONTROLLER = { 0x3ABF6F2D, 0x71C4, 0x462A, {0x8A, 0x92, 0x1E, 0x68, 0x61, 0xE6, 0xAF, 0x27} };
+#endif
+#if !defined(GUID_DEVINTERFACE_USB_DEVICE)
+const GUID GUID_DEVINTERFACE_USB_DEVICE = { 0xA5DCBF10, 0x6530, 0x11D2, {0x90, 0x1F, 0x00, 0xC0, 0x4F, 0xB9, 0x51, 0xED} };
+#endif
+#if !defined(GUID_DEVINTERFACE_USB_HUB)
+const GUID GUID_DEVINTERFACE_USB_HUB = { 0xF18A0E88, 0xC30C, 0x11D0, {0x88, 0x15, 0x00, 0xA0, 0xC9, 0x06, 0xBE, 0xD8} };
+#endif
+#if !defined(GUID_DEVINTERFACE_LIBUSB0_FILTER)
+const GUID GUID_DEVINTERFACE_LIBUSB0_FILTER = { 0xF9F3FF14, 0xAE21, 0x48A0, {0x8A, 0x25, 0x80, 0x11, 0xA7, 0xA9, 0x31, 0xD9} };
+#endif
+
+
+/*
+ * Multiple USB API backend support
+ */
+#define USB_API_UNSUPPORTED 0
+#define USB_API_HUB 1
+#define USB_API_COMPOSITE 2
+#define USB_API_WINUSBX 3
+#define USB_API_HID 4
+#define USB_API_MAX 5
+// The following is used to indicate if the HID or composite extra props have already been set.
+#define USB_API_SET (1<<USB_API_MAX)
+
+// Sub-APIs for WinUSB-like driver APIs (WinUSB, libusbK, libusb-win32 through the libusbK DLL)
+// Must have the same values as the KUSB_DRVID enum from libusbk.h
+#define SUB_API_NOTSET -1
+#define SUB_API_LIBUSBK 0
+#define SUB_API_LIBUSB0 1
+#define SUB_API_WINUSB 2
+#define SUB_API_MAX 3
+
+#define WINUSBX_DRV_NAMES { "libusbK", "libusb0", "WinUSB"}
+
+struct windows_usb_api_backend {
+ const uint8_t id;
+ const char* designation;
+ const char **driver_name_list; // Driver name, without .sys, e.g. "usbccgp"
+ const uint8_t nb_driver_names;
+ int (*init)(int sub_api, struct libusb_context *ctx);
+ int (*exit)(int sub_api);
+ int (*open)(int sub_api, struct libusb_device_handle *dev_handle);
+ void (*close)(int sub_api, struct libusb_device_handle *dev_handle);
+ int (*configure_endpoints)(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+ int (*claim_interface)(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+ int (*set_interface_altsetting)(int sub_api, struct libusb_device_handle *dev_handle, int iface, int altsetting);
+ int (*release_interface)(int sub_api, struct libusb_device_handle *dev_handle, int iface);
+ int (*clear_halt)(int sub_api, struct libusb_device_handle *dev_handle, unsigned char endpoint);
+ int (*reset_device)(int sub_api, struct libusb_device_handle *dev_handle);
+ int (*submit_bulk_transfer)(int sub_api, struct usbi_transfer *itransfer);
+ int (*submit_iso_transfer)(int sub_api, struct usbi_transfer *itransfer);
+ int (*submit_control_transfer)(int sub_api, struct usbi_transfer *itransfer);
+ int (*abort_control)(int sub_api, struct usbi_transfer *itransfer);
+ int (*abort_transfers)(int sub_api, struct usbi_transfer *itransfer);
+ int (*copy_transfer_data)(int sub_api, struct usbi_transfer *itransfer, uint32_t io_size);
+};
+
+extern const struct windows_usb_api_backend usb_api_backend[USB_API_MAX];
+
+#define PRINT_UNSUPPORTED_API(fname) \
+ usbi_dbg("unsupported API call for '" \
+ #fname "' (unrecognized device driver)"); \
+ return LIBUSB_ERROR_NOT_SUPPORTED;
+
+/*
+ * private structures definition
+ * with inline pseudo constructors/destructors
+ */
+
+// TODO (v2+): move hid desc to libusb.h?
+struct libusb_hid_descriptor {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bcdHID;
+ uint8_t bCountryCode;
+ uint8_t bNumDescriptors;
+ uint8_t bClassDescriptorType;
+ uint16_t wClassDescriptorLength;
+};
+#define LIBUSB_DT_HID_SIZE 9
+#define HID_MAX_CONFIG_DESC_SIZE (LIBUSB_DT_CONFIG_SIZE + LIBUSB_DT_INTERFACE_SIZE \
+ + LIBUSB_DT_HID_SIZE + 2 * LIBUSB_DT_ENDPOINT_SIZE)
+#define HID_MAX_REPORT_SIZE 1024
+#define HID_IN_EP 0x81
+#define HID_OUT_EP 0x02
+#define LIBUSB_REQ_RECIPIENT(request_type) ((request_type) & 0x1F)
+#define LIBUSB_REQ_TYPE(request_type) ((request_type) & (0x03 << 5))
+#define LIBUSB_REQ_IN(request_type) ((request_type) & LIBUSB_ENDPOINT_IN)
+#define LIBUSB_REQ_OUT(request_type) (!LIBUSB_REQ_IN(request_type))
+
+// The following are used for HID reports IOCTLs
+#define HID_CTL_CODE(id) \
+ CTL_CODE (FILE_DEVICE_KEYBOARD, (id), METHOD_NEITHER, FILE_ANY_ACCESS)
+#define HID_BUFFER_CTL_CODE(id) \
+ CTL_CODE (FILE_DEVICE_KEYBOARD, (id), METHOD_BUFFERED, FILE_ANY_ACCESS)
+#define HID_IN_CTL_CODE(id) \
+ CTL_CODE (FILE_DEVICE_KEYBOARD, (id), METHOD_IN_DIRECT, FILE_ANY_ACCESS)
+#define HID_OUT_CTL_CODE(id) \
+ CTL_CODE (FILE_DEVICE_KEYBOARD, (id), METHOD_OUT_DIRECT, FILE_ANY_ACCESS)
+
+#define IOCTL_HID_GET_FEATURE HID_OUT_CTL_CODE(100)
+#define IOCTL_HID_GET_INPUT_REPORT HID_OUT_CTL_CODE(104)
+#define IOCTL_HID_SET_FEATURE HID_IN_CTL_CODE(100)
+#define IOCTL_HID_SET_OUTPUT_REPORT HID_IN_CTL_CODE(101)
+
+enum libusb_hid_request_type {
+ HID_REQ_GET_REPORT = 0x01,
+ HID_REQ_GET_IDLE = 0x02,
+ HID_REQ_GET_PROTOCOL = 0x03,
+ HID_REQ_SET_REPORT = 0x09,
+ HID_REQ_SET_IDLE = 0x0A,
+ HID_REQ_SET_PROTOCOL = 0x0B
+};
+
+enum libusb_hid_report_type {
+ HID_REPORT_TYPE_INPUT = 0x01,
+ HID_REPORT_TYPE_OUTPUT = 0x02,
+ HID_REPORT_TYPE_FEATURE = 0x03
+};
+
+struct hid_device_priv {
+ uint16_t vid;
+ uint16_t pid;
+ uint8_t config;
+ uint8_t nb_interfaces;
+ bool uses_report_ids[3]; // input, ouptput, feature
+ uint16_t input_report_size;
+ uint16_t output_report_size;
+ uint16_t feature_report_size;
+ WCHAR string[3][MAX_USB_STRING_LENGTH];
+ uint8_t string_index[3]; // man, prod, ser
+};
+
+typedef struct libusb_device_descriptor USB_DEVICE_DESCRIPTOR, *PUSB_DEVICE_DESCRIPTOR;
+struct windows_device_priv {
+ uint8_t depth; // distance to HCD
+ uint8_t port; // port number on the hub
+ uint8_t active_config;
+ struct libusb_device *parent_dev; // access to parent is required for usermode ops
+ struct windows_usb_api_backend const *apib;
+ char *path; // device interface path
+ int sub_api; // for WinUSB-like APIs
+ struct {
+ char *path; // each interface needs a device interface path,
+ struct windows_usb_api_backend const *apib; // an API backend (multiple drivers support),
+ int sub_api;
+ int8_t nb_endpoints; // and a set of endpoint addresses (USB_MAXENDPOINTS)
+ uint8_t *endpoint;
+ bool restricted_functionality; // indicates if the interface functionality is restricted
+ // by Windows (eg. HID keyboards or mice cannot do R/W)
+ } usb_interface[USB_MAXINTERFACES];
+ struct hid_device_priv *hid;
+ USB_DEVICE_DESCRIPTOR dev_descriptor;
+ unsigned char **config_descriptor; // list of pointers to the cached config descriptors
+};
+
+static inline struct windows_device_priv *_device_priv(struct libusb_device *dev) {
+ return (struct windows_device_priv *)dev->os_priv;
+}
+
+static inline void windows_device_priv_init(libusb_device* dev) {
+ struct windows_device_priv* p = _device_priv(dev);
+ int i;
+ p->depth = 0;
+ p->port = 0;
+ p->parent_dev = NULL;
+ p->path = NULL;
+ p->apib = &usb_api_backend[USB_API_UNSUPPORTED];
+ p->sub_api = SUB_API_NOTSET;
+ p->hid = NULL;
+ p->active_config = 0;
+ p->config_descriptor = NULL;
+ memset(&(p->dev_descriptor), 0, sizeof(USB_DEVICE_DESCRIPTOR));
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ p->usb_interface[i].path = NULL;
+ p->usb_interface[i].apib = &usb_api_backend[USB_API_UNSUPPORTED];
+ p->usb_interface[i].sub_api = SUB_API_NOTSET;
+ p->usb_interface[i].nb_endpoints = 0;
+ p->usb_interface[i].endpoint = NULL;
+ p->usb_interface[i].restricted_functionality = false;
+ }
+}
+
+static inline void windows_device_priv_release(libusb_device* dev) {
+ struct windows_device_priv* p = _device_priv(dev);
+ int i;
+ safe_free(p->path);
+ if ((dev->num_configurations > 0) && (p->config_descriptor != NULL)) {
+ for (i=0; i < dev->num_configurations; i++)
+ safe_free(p->config_descriptor[i]);
+ }
+ safe_free(p->config_descriptor);
+ safe_free(p->hid);
+ for (i=0; i<USB_MAXINTERFACES; i++) {
+ safe_free(p->usb_interface[i].path);
+ safe_free(p->usb_interface[i].endpoint);
+ }
+}
+
+struct interface_handle_t {
+ HANDLE dev_handle; // WinUSB needs an extra handle for the file
+ HANDLE api_handle; // used by the API to communicate with the device
+};
+
+struct windows_device_handle_priv {
+ int active_interface;
+ struct interface_handle_t interface_handle[USB_MAXINTERFACES];
+ int autoclaim_count[USB_MAXINTERFACES]; // For auto-release
+};
+
+static inline struct windows_device_handle_priv *_device_handle_priv(
+ struct libusb_device_handle *handle)
+{
+ return (struct windows_device_handle_priv *) handle->os_priv;
+}
+
+// used for async polling functions
+struct windows_transfer_priv {
+ struct winfd pollable_fd;
+ uint8_t interface_number;
+ uint8_t *hid_buffer; // 1 byte extended data buffer, required for HID
+ uint8_t *hid_dest; // transfer buffer destination, required for HID
+ size_t hid_expected_size;
+};
+
+// used to match a device driver (including filter drivers) against a supported API
+struct driver_lookup {
+ char list[MAX_KEY_LENGTH+1];// REG_MULTI_SZ list of services (driver) names
+ const DWORD reg_prop; // SPDRP registry key to use to retreive list
+ const char* designation; // internal designation (for debug output)
+};
+
+#define WM_TIMER_REQUEST (WM_USER + 1)
+#define WM_TIMER_EXIT (WM_USER + 2)
+
+// used for monotonic clock_gettime()
+struct timer_request {
+ struct timespec *tp;
+ HANDLE event;
+};
+
+/* OLE32 dependency */
+DLL_DECLARE_PREFIXED(WINAPI, HRESULT, p, CLSIDFromString, (LPCOLESTR, LPCLSID));
+
+/* This call is only available from XP SP2 */
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, IsWow64Process, (HANDLE, PBOOL));
+
+/* SetupAPI dependencies */
+DLL_DECLARE_PREFIXED(WINAPI, HDEVINFO, p, SetupDiGetClassDevsA, (const GUID*, PCSTR, HWND, DWORD));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, SetupDiEnumDeviceInfo, (HDEVINFO, DWORD, PSP_DEVINFO_DATA));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, SetupDiEnumDeviceInterfaces, (HDEVINFO, PSP_DEVINFO_DATA,
+ const GUID*, DWORD, PSP_DEVICE_INTERFACE_DATA));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, SetupDiGetDeviceInterfaceDetailA, (HDEVINFO, PSP_DEVICE_INTERFACE_DATA,
+ PSP_DEVICE_INTERFACE_DETAIL_DATA_A, DWORD, PDWORD, PSP_DEVINFO_DATA));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, SetupDiDestroyDeviceInfoList, (HDEVINFO));
+DLL_DECLARE_PREFIXED(WINAPI, HKEY, p, SetupDiOpenDevRegKey, (HDEVINFO, PSP_DEVINFO_DATA, DWORD, DWORD, DWORD, REGSAM));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, SetupDiGetDeviceRegistryPropertyA, (HDEVINFO,
+ PSP_DEVINFO_DATA, DWORD, PDWORD, PBYTE, DWORD, PDWORD));
+DLL_DECLARE_PREFIXED(WINAPI, HKEY, p, SetupDiOpenDeviceInterfaceRegKey, (HDEVINFO, PSP_DEVICE_INTERFACE_DATA, DWORD, DWORD));
+DLL_DECLARE_PREFIXED(WINAPI, LONG, p, RegQueryValueExW, (HKEY, LPCWSTR, LPDWORD, LPDWORD, LPBYTE, LPDWORD));
+DLL_DECLARE_PREFIXED(WINAPI, LONG, p, RegCloseKey, (HKEY));
+
+/* User32 dependencies */
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, GetMessageA, (LPMSG, HWND, UINT, UINT));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, PeekMessageA, (LPMSG, HWND, UINT, UINT, UINT));
+DLL_DECLARE_PREFIXED(WINAPI, BOOL, p, PostThreadMessageA, (DWORD, UINT, WPARAM, LPARAM));
+
+/*
+ * Windows DDK API definitions. Most of it copied from MinGW's includes
+ */
+typedef DWORD DEVNODE, DEVINST;
+typedef DEVNODE *PDEVNODE, *PDEVINST;
+typedef DWORD RETURN_TYPE;
+typedef RETURN_TYPE CONFIGRET;
+
+#define CR_SUCCESS 0x00000000
+#define CR_NO_SUCH_DEVNODE 0x0000000D
+
+#define USB_DEVICE_DESCRIPTOR_TYPE LIBUSB_DT_DEVICE
+#define USB_CONFIGURATION_DESCRIPTOR_TYPE LIBUSB_DT_CONFIG
+#define USB_STRING_DESCRIPTOR_TYPE LIBUSB_DT_STRING
+#define USB_INTERFACE_DESCRIPTOR_TYPE LIBUSB_DT_INTERFACE
+#define USB_ENDPOINT_DESCRIPTOR_TYPE LIBUSB_DT_ENDPOINT
+
+#define USB_REQUEST_GET_STATUS LIBUSB_REQUEST_GET_STATUS
+#define USB_REQUEST_CLEAR_FEATURE LIBUSB_REQUEST_CLEAR_FEATURE
+#define USB_REQUEST_SET_FEATURE LIBUSB_REQUEST_SET_FEATURE
+#define USB_REQUEST_SET_ADDRESS LIBUSB_REQUEST_SET_ADDRESS
+#define USB_REQUEST_GET_DESCRIPTOR LIBUSB_REQUEST_GET_DESCRIPTOR
+#define USB_REQUEST_SET_DESCRIPTOR LIBUSB_REQUEST_SET_DESCRIPTOR
+#define USB_REQUEST_GET_CONFIGURATION LIBUSB_REQUEST_GET_CONFIGURATION
+#define USB_REQUEST_SET_CONFIGURATION LIBUSB_REQUEST_SET_CONFIGURATION
+#define USB_REQUEST_GET_INTERFACE LIBUSB_REQUEST_GET_INTERFACE
+#define USB_REQUEST_SET_INTERFACE LIBUSB_REQUEST_SET_INTERFACE
+#define USB_REQUEST_SYNC_FRAME LIBUSB_REQUEST_SYNCH_FRAME
+
+#define USB_GET_NODE_INFORMATION 258
+#define USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION 260
+#define USB_GET_NODE_CONNECTION_NAME 261
+#define USB_GET_HUB_CAPABILITIES 271
+#if !defined(USB_GET_NODE_CONNECTION_INFORMATION_EX)
+#define USB_GET_NODE_CONNECTION_INFORMATION_EX 274
+#endif
+#if !defined(USB_GET_HUB_CAPABILITIES_EX)
+#define USB_GET_HUB_CAPABILITIES_EX 276
+#endif
+#if !defined(USB_GET_NODE_CONNECTION_INFORMATION_EX_V2)
+#define USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 279
+#endif
+
+#ifndef METHOD_BUFFERED
+#define METHOD_BUFFERED 0
+#endif
+#ifndef FILE_ANY_ACCESS
+#define FILE_ANY_ACCESS 0x00000000
+#endif
+#ifndef FILE_DEVICE_UNKNOWN
+#define FILE_DEVICE_UNKNOWN 0x00000022
+#endif
+#ifndef FILE_DEVICE_USB
+#define FILE_DEVICE_USB FILE_DEVICE_UNKNOWN
+#endif
+
+#ifndef CTL_CODE
+#define CTL_CODE(DeviceType, Function, Method, Access)( \
+ ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method))
+#endif
+
+typedef enum USB_CONNECTION_STATUS {
+ NoDeviceConnected,
+ DeviceConnected,
+ DeviceFailedEnumeration,
+ DeviceGeneralFailure,
+ DeviceCausedOvercurrent,
+ DeviceNotEnoughPower,
+ DeviceNotEnoughBandwidth,
+ DeviceHubNestedTooDeeply,
+ DeviceInLegacyHub
+} USB_CONNECTION_STATUS, *PUSB_CONNECTION_STATUS;
+
+typedef enum USB_HUB_NODE {
+ UsbHub,
+ UsbMIParent
+} USB_HUB_NODE;
+
+/* Cfgmgr32.dll interface */
+DLL_DECLARE(WINAPI, CONFIGRET, CM_Get_Parent, (PDEVINST, DEVINST, ULONG));
+DLL_DECLARE(WINAPI, CONFIGRET, CM_Get_Child, (PDEVINST, DEVINST, ULONG));
+DLL_DECLARE(WINAPI, CONFIGRET, CM_Get_Sibling, (PDEVINST, DEVINST, ULONG));
+DLL_DECLARE(WINAPI, CONFIGRET, CM_Get_Device_IDA, (DEVINST, PCHAR, ULONG, ULONG));
+
+#define IOCTL_USB_GET_HUB_CAPABILITIES_EX \
+ CTL_CODE( FILE_DEVICE_USB, USB_GET_HUB_CAPABILITIES_EX, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_HUB_CAPABILITIES \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_HUB_CAPABILITIES, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_ROOT_HUB_NAME \
+ CTL_CODE(FILE_DEVICE_USB, HCD_GET_ROOT_HUB_NAME, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_NODE_INFORMATION \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_NODE_INFORMATION, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_NODE_CONNECTION_INFORMATION_EX, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_NODE_CONNECTION_INFORMATION_EX_V2, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_NODE_CONNECTION_ATTRIBUTES, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+#define IOCTL_USB_GET_NODE_CONNECTION_NAME \
+ CTL_CODE(FILE_DEVICE_USB, USB_GET_NODE_CONNECTION_NAME, METHOD_BUFFERED, FILE_ANY_ACCESS)
+
+// Most of the structures below need to be packed
+#pragma pack(push, 1)
+
+typedef struct USB_INTERFACE_DESCRIPTOR {
+ UCHAR bLength;
+ UCHAR bDescriptorType;
+ UCHAR bInterfaceNumber;
+ UCHAR bAlternateSetting;
+ UCHAR bNumEndpoints;
+ UCHAR bInterfaceClass;
+ UCHAR bInterfaceSubClass;
+ UCHAR bInterfaceProtocol;
+ UCHAR iInterface;
+} USB_INTERFACE_DESCRIPTOR, *PUSB_INTERFACE_DESCRIPTOR;
+
+typedef struct USB_CONFIGURATION_DESCRIPTOR {
+ UCHAR bLength;
+ UCHAR bDescriptorType;
+ USHORT wTotalLength;
+ UCHAR bNumInterfaces;
+ UCHAR bConfigurationValue;
+ UCHAR iConfiguration;
+ UCHAR bmAttributes;
+ UCHAR MaxPower;
+} USB_CONFIGURATION_DESCRIPTOR, *PUSB_CONFIGURATION_DESCRIPTOR;
+
+typedef struct USB_CONFIGURATION_DESCRIPTOR_SHORT {
+ struct {
+ ULONG ConnectionIndex;
+ struct {
+ UCHAR bmRequest;
+ UCHAR bRequest;
+ USHORT wValue;
+ USHORT wIndex;
+ USHORT wLength;
+ } SetupPacket;
+ } req;
+ USB_CONFIGURATION_DESCRIPTOR data;
+} USB_CONFIGURATION_DESCRIPTOR_SHORT;
+
+typedef struct USB_ENDPOINT_DESCRIPTOR {
+ UCHAR bLength;
+ UCHAR bDescriptorType;
+ UCHAR bEndpointAddress;
+ UCHAR bmAttributes;
+ USHORT wMaxPacketSize;
+ UCHAR bInterval;
+} USB_ENDPOINT_DESCRIPTOR, *PUSB_ENDPOINT_DESCRIPTOR;
+
+typedef struct USB_DESCRIPTOR_REQUEST {
+ ULONG ConnectionIndex;
+ struct {
+ UCHAR bmRequest;
+ UCHAR bRequest;
+ USHORT wValue;
+ USHORT wIndex;
+ USHORT wLength;
+ } SetupPacket;
+// UCHAR Data[0];
+} USB_DESCRIPTOR_REQUEST, *PUSB_DESCRIPTOR_REQUEST;
+
+typedef struct USB_HUB_DESCRIPTOR {
+ UCHAR bDescriptorLength;
+ UCHAR bDescriptorType;
+ UCHAR bNumberOfPorts;
+ USHORT wHubCharacteristics;
+ UCHAR bPowerOnToPowerGood;
+ UCHAR bHubControlCurrent;
+ UCHAR bRemoveAndPowerMask[64];
+} USB_HUB_DESCRIPTOR, *PUSB_HUB_DESCRIPTOR;
+
+typedef struct USB_ROOT_HUB_NAME {
+ ULONG ActualLength;
+ WCHAR RootHubName[1];
+} USB_ROOT_HUB_NAME, *PUSB_ROOT_HUB_NAME;
+
+typedef struct USB_ROOT_HUB_NAME_FIXED {
+ ULONG ActualLength;
+ WCHAR RootHubName[MAX_PATH_LENGTH];
+} USB_ROOT_HUB_NAME_FIXED;
+
+typedef struct USB_NODE_CONNECTION_NAME {
+ ULONG ConnectionIndex;
+ ULONG ActualLength;
+ WCHAR NodeName[1];
+} USB_NODE_CONNECTION_NAME, *PUSB_NODE_CONNECTION_NAME;
+
+typedef struct USB_NODE_CONNECTION_NAME_FIXED {
+ ULONG ConnectionIndex;
+ ULONG ActualLength;
+ WCHAR NodeName[MAX_PATH_LENGTH];
+} USB_NODE_CONNECTION_NAME_FIXED;
+
+typedef struct USB_HUB_NAME_FIXED {
+ union {
+ USB_ROOT_HUB_NAME_FIXED root;
+ USB_NODE_CONNECTION_NAME_FIXED node;
+ } u;
+} USB_HUB_NAME_FIXED;
+
+typedef struct USB_HUB_INFORMATION {
+ USB_HUB_DESCRIPTOR HubDescriptor;
+ BOOLEAN HubIsBusPowered;
+} USB_HUB_INFORMATION, *PUSB_HUB_INFORMATION;
+
+typedef struct USB_MI_PARENT_INFORMATION {
+ ULONG NumberOfInterfaces;
+} USB_MI_PARENT_INFORMATION, *PUSB_MI_PARENT_INFORMATION;
+
+typedef struct USB_NODE_INFORMATION {
+ USB_HUB_NODE NodeType;
+ union {
+ USB_HUB_INFORMATION HubInformation;
+ USB_MI_PARENT_INFORMATION MiParentInformation;
+ } u;
+} USB_NODE_INFORMATION, *PUSB_NODE_INFORMATION;
+
+typedef struct USB_PIPE_INFO {
+ USB_ENDPOINT_DESCRIPTOR EndpointDescriptor;
+ ULONG ScheduleOffset;
+} USB_PIPE_INFO, *PUSB_PIPE_INFO;
+
+typedef struct USB_NODE_CONNECTION_INFORMATION_EX {
+ ULONG ConnectionIndex;
+ USB_DEVICE_DESCRIPTOR DeviceDescriptor;
+ UCHAR CurrentConfigurationValue;
+ UCHAR Speed;
+ BOOLEAN DeviceIsHub;
+ USHORT DeviceAddress;
+ ULONG NumberOfOpenPipes;
+ USB_CONNECTION_STATUS ConnectionStatus;
+// USB_PIPE_INFO PipeList[0];
+} USB_NODE_CONNECTION_INFORMATION_EX, *PUSB_NODE_CONNECTION_INFORMATION_EX;
+
+typedef union _USB_PROTOCOLS {
+ ULONG ul;
+ struct {
+ ULONG Usb110:1;
+ ULONG Usb200:1;
+ ULONG Usb300:1;
+ ULONG ReservedMBZ:29;
+ };
+} USB_PROTOCOLS, *PUSB_PROTOCOLS;
+
+typedef union _USB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS {
+ ULONG ul;
+ struct {
+ ULONG DeviceIsOperatingAtSuperSpeedOrHigher:1;
+ ULONG DeviceIsSuperSpeedCapableOrHigher:1;
+ ULONG ReservedMBZ:30;
+ };
+} USB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS, *PUSB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS;
+
+typedef struct _USB_NODE_CONNECTION_INFORMATION_EX_V2 {
+ ULONG ConnectionIndex;
+ ULONG Length;
+ USB_PROTOCOLS SupportedUsbProtocols;
+ USB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS Flags;
+} USB_NODE_CONNECTION_INFORMATION_EX_V2, *PUSB_NODE_CONNECTION_INFORMATION_EX_V2;
+
+typedef struct USB_HUB_CAP_FLAGS {
+ ULONG HubIsHighSpeedCapable:1;
+ ULONG HubIsHighSpeed:1;
+ ULONG HubIsMultiTtCapable:1;
+ ULONG HubIsMultiTt:1;
+ ULONG HubIsRoot:1;
+ ULONG HubIsArmedWakeOnConnect:1;
+ ULONG ReservedMBZ:26;
+} USB_HUB_CAP_FLAGS, *PUSB_HUB_CAP_FLAGS;
+
+typedef struct USB_HUB_CAPABILITIES {
+ ULONG HubIs2xCapable : 1;
+} USB_HUB_CAPABILITIES, *PUSB_HUB_CAPABILITIES;
+
+typedef struct USB_HUB_CAPABILITIES_EX {
+ USB_HUB_CAP_FLAGS CapabilityFlags;
+} USB_HUB_CAPABILITIES_EX, *PUSB_HUB_CAPABILITIES_EX;
+
+#pragma pack(pop)
+
+/* winusb.dll interface */
+
+#define SHORT_PACKET_TERMINATE 0x01
+#define AUTO_CLEAR_STALL 0x02
+#define PIPE_TRANSFER_TIMEOUT 0x03
+#define IGNORE_SHORT_PACKETS 0x04
+#define ALLOW_PARTIAL_READS 0x05
+#define AUTO_FLUSH 0x06
+#define RAW_IO 0x07
+#define MAXIMUM_TRANSFER_SIZE 0x08
+#define AUTO_SUSPEND 0x81
+#define SUSPEND_DELAY 0x83
+#define DEVICE_SPEED 0x01
+#define LowSpeed 0x01
+#define FullSpeed 0x02
+#define HighSpeed 0x03
+
+typedef enum USBD_PIPE_TYPE {
+ UsbdPipeTypeControl,
+ UsbdPipeTypeIsochronous,
+ UsbdPipeTypeBulk,
+ UsbdPipeTypeInterrupt
+} USBD_PIPE_TYPE;
+
+typedef struct {
+ USBD_PIPE_TYPE PipeType;
+ UCHAR PipeId;
+ USHORT MaximumPacketSize;
+ UCHAR Interval;
+} WINUSB_PIPE_INFORMATION, *PWINUSB_PIPE_INFORMATION;
+
+#pragma pack(1)
+typedef struct {
+ UCHAR request_type;
+ UCHAR request;
+ USHORT value;
+ USHORT index;
+ USHORT length;
+} WINUSB_SETUP_PACKET, *PWINUSB_SETUP_PACKET;
+#pragma pack()
+
+typedef void *WINUSB_INTERFACE_HANDLE, *PWINUSB_INTERFACE_HANDLE;
+
+typedef BOOL (WINAPI *WinUsb_AbortPipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID
+);
+typedef BOOL (WINAPI *WinUsb_ControlTransfer_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ WINUSB_SETUP_PACKET SetupPacket,
+ PUCHAR Buffer,
+ ULONG BufferLength,
+ PULONG LengthTransferred,
+ LPOVERLAPPED Overlapped
+);
+typedef BOOL (WINAPI *WinUsb_FlushPipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID
+);
+typedef BOOL (WINAPI *WinUsb_Free_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle
+);
+typedef BOOL (WINAPI *WinUsb_GetAssociatedInterface_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR AssociatedInterfaceIndex,
+ PWINUSB_INTERFACE_HANDLE AssociatedInterfaceHandle
+);
+typedef BOOL (WINAPI *WinUsb_GetCurrentAlternateSetting_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ PUCHAR AlternateSetting
+);
+typedef BOOL (WINAPI *WinUsb_GetDescriptor_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR DescriptorType,
+ UCHAR Index,
+ USHORT LanguageID,
+ PUCHAR Buffer,
+ ULONG BufferLength,
+ PULONG LengthTransferred
+);
+typedef BOOL (WINAPI *WinUsb_GetOverlappedResult_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ LPOVERLAPPED lpOverlapped,
+ LPDWORD lpNumberOfBytesTransferred,
+ BOOL bWait
+);
+typedef BOOL (WINAPI *WinUsb_GetPipePolicy_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID,
+ ULONG PolicyType,
+ PULONG ValueLength,
+ PVOID Value
+);
+typedef BOOL (WINAPI *WinUsb_GetPowerPolicy_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ ULONG PolicyType,
+ PULONG ValueLength,
+ PVOID Value
+);
+typedef BOOL (WINAPI *WinUsb_Initialize_t)(
+ HANDLE DeviceHandle,
+ PWINUSB_INTERFACE_HANDLE InterfaceHandle
+);
+typedef BOOL (WINAPI *WinUsb_QueryDeviceInformation_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ ULONG InformationType,
+ PULONG BufferLength,
+ PVOID Buffer
+);
+typedef BOOL (WINAPI *WinUsb_QueryInterfaceSettings_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR AlternateSettingNumber,
+ PUSB_INTERFACE_DESCRIPTOR UsbAltInterfaceDescriptor
+);
+typedef BOOL (WINAPI *WinUsb_QueryPipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR AlternateInterfaceNumber,
+ UCHAR PipeIndex,
+ PWINUSB_PIPE_INFORMATION PipeInformation
+);
+typedef BOOL (WINAPI *WinUsb_ReadPipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID,
+ PUCHAR Buffer,
+ ULONG BufferLength,
+ PULONG LengthTransferred,
+ LPOVERLAPPED Overlapped
+);
+typedef BOOL (WINAPI *WinUsb_ResetPipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID
+);
+typedef BOOL (WINAPI *WinUsb_SetCurrentAlternateSetting_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR AlternateSetting
+);
+typedef BOOL (WINAPI *WinUsb_SetPipePolicy_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID,
+ ULONG PolicyType,
+ ULONG ValueLength,
+ PVOID Value
+);
+typedef BOOL (WINAPI *WinUsb_SetPowerPolicy_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ ULONG PolicyType,
+ ULONG ValueLength,
+ PVOID Value
+);
+typedef BOOL (WINAPI *WinUsb_WritePipe_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle,
+ UCHAR PipeID,
+ PUCHAR Buffer,
+ ULONG BufferLength,
+ PULONG LengthTransferred,
+ LPOVERLAPPED Overlapped
+);
+typedef BOOL (WINAPI *WinUsb_ResetDevice_t)(
+ WINUSB_INTERFACE_HANDLE InterfaceHandle
+);
+
+/* /!\ These must match the ones from the official libusbk.h */
+typedef enum _KUSB_FNID
+{
+ KUSB_FNID_Init,
+ KUSB_FNID_Free,
+ KUSB_FNID_ClaimInterface,
+ KUSB_FNID_ReleaseInterface,
+ KUSB_FNID_SetAltInterface,
+ KUSB_FNID_GetAltInterface,
+ KUSB_FNID_GetDescriptor,
+ KUSB_FNID_ControlTransfer,
+ KUSB_FNID_SetPowerPolicy,
+ KUSB_FNID_GetPowerPolicy,
+ KUSB_FNID_SetConfiguration,
+ KUSB_FNID_GetConfiguration,
+ KUSB_FNID_ResetDevice,
+ KUSB_FNID_Initialize,
+ KUSB_FNID_SelectInterface,
+ KUSB_FNID_GetAssociatedInterface,
+ KUSB_FNID_Clone,
+ KUSB_FNID_QueryInterfaceSettings,
+ KUSB_FNID_QueryDeviceInformation,
+ KUSB_FNID_SetCurrentAlternateSetting,
+ KUSB_FNID_GetCurrentAlternateSetting,
+ KUSB_FNID_QueryPipe,
+ KUSB_FNID_SetPipePolicy,
+ KUSB_FNID_GetPipePolicy,
+ KUSB_FNID_ReadPipe,
+ KUSB_FNID_WritePipe,
+ KUSB_FNID_ResetPipe,
+ KUSB_FNID_AbortPipe,
+ KUSB_FNID_FlushPipe,
+ KUSB_FNID_IsoReadPipe,
+ KUSB_FNID_IsoWritePipe,
+ KUSB_FNID_GetCurrentFrameNumber,
+ KUSB_FNID_GetOverlappedResult,
+ KUSB_FNID_GetProperty,
+ KUSB_FNID_COUNT,
+} KUSB_FNID;
+
+typedef struct _KLIB_VERSION {
+ INT Major;
+ INT Minor;
+ INT Micro;
+ INT Nano;
+} KLIB_VERSION;
+typedef KLIB_VERSION* PKLIB_VERSION;
+
+typedef BOOL (WINAPI *LibK_GetProcAddress_t)(
+ PVOID* ProcAddress,
+ ULONG DriverID,
+ ULONG FunctionID
+);
+
+typedef VOID (WINAPI *LibK_GetVersion_t)(
+ PKLIB_VERSION Version
+);
+
+struct winusb_interface {
+ bool initialized;
+ WinUsb_AbortPipe_t AbortPipe;
+ WinUsb_ControlTransfer_t ControlTransfer;
+ WinUsb_FlushPipe_t FlushPipe;
+ WinUsb_Free_t Free;
+ WinUsb_GetAssociatedInterface_t GetAssociatedInterface;
+ WinUsb_GetCurrentAlternateSetting_t GetCurrentAlternateSetting;
+ WinUsb_GetDescriptor_t GetDescriptor;
+ WinUsb_GetOverlappedResult_t GetOverlappedResult;
+ WinUsb_GetPipePolicy_t GetPipePolicy;
+ WinUsb_GetPowerPolicy_t GetPowerPolicy;
+ WinUsb_Initialize_t Initialize;
+ WinUsb_QueryDeviceInformation_t QueryDeviceInformation;
+ WinUsb_QueryInterfaceSettings_t QueryInterfaceSettings;
+ WinUsb_QueryPipe_t QueryPipe;
+ WinUsb_ReadPipe_t ReadPipe;
+ WinUsb_ResetPipe_t ResetPipe;
+ WinUsb_SetCurrentAlternateSetting_t SetCurrentAlternateSetting;
+ WinUsb_SetPipePolicy_t SetPipePolicy;
+ WinUsb_SetPowerPolicy_t SetPowerPolicy;
+ WinUsb_WritePipe_t WritePipe;
+ WinUsb_ResetDevice_t ResetDevice;
+};
+
+/* hid.dll interface */
+
+#define HIDP_STATUS_SUCCESS 0x110000
+typedef void* PHIDP_PREPARSED_DATA;
+
+#pragma pack(1)
+typedef struct {
+ ULONG Size;
+ USHORT VendorID;
+ USHORT ProductID;
+ USHORT VersionNumber;
+} HIDD_ATTRIBUTES, *PHIDD_ATTRIBUTES;
+#pragma pack()
+
+typedef USHORT USAGE;
+typedef struct {
+ USAGE Usage;
+ USAGE UsagePage;
+ USHORT InputReportByteLength;
+ USHORT OutputReportByteLength;
+ USHORT FeatureReportByteLength;
+ USHORT Reserved[17];
+ USHORT NumberLinkCollectionNodes;
+ USHORT NumberInputButtonCaps;
+ USHORT NumberInputValueCaps;
+ USHORT NumberInputDataIndices;
+ USHORT NumberOutputButtonCaps;
+ USHORT NumberOutputValueCaps;
+ USHORT NumberOutputDataIndices;
+ USHORT NumberFeatureButtonCaps;
+ USHORT NumberFeatureValueCaps;
+ USHORT NumberFeatureDataIndices;
+} HIDP_CAPS, *PHIDP_CAPS;
+
+typedef enum _HIDP_REPORT_TYPE {
+ HidP_Input,
+ HidP_Output,
+ HidP_Feature
+} HIDP_REPORT_TYPE;
+
+typedef struct _HIDP_VALUE_CAPS {
+ USAGE UsagePage;
+ UCHAR ReportID;
+ BOOLEAN IsAlias;
+ USHORT BitField;
+ USHORT LinkCollection;
+ USAGE LinkUsage;
+ USAGE LinkUsagePage;
+ BOOLEAN IsRange;
+ BOOLEAN IsStringRange;
+ BOOLEAN IsDesignatorRange;
+ BOOLEAN IsAbsolute;
+ BOOLEAN HasNull;
+ UCHAR Reserved;
+ USHORT BitSize;
+ USHORT ReportCount;
+ USHORT Reserved2[5];
+ ULONG UnitsExp;
+ ULONG Units;
+ LONG LogicalMin, LogicalMax;
+ LONG PhysicalMin, PhysicalMax;
+ union {
+ struct {
+ USAGE UsageMin, UsageMax;
+ USHORT StringMin, StringMax;
+ USHORT DesignatorMin, DesignatorMax;
+ USHORT DataIndexMin, DataIndexMax;
+ } Range;
+ struct {
+ USAGE Usage, Reserved1;
+ USHORT StringIndex, Reserved2;
+ USHORT DesignatorIndex, Reserved3;
+ USHORT DataIndex, Reserved4;
+ } NotRange;
+ } u;
+} HIDP_VALUE_CAPS, *PHIDP_VALUE_CAPS;
+
+DLL_DECLARE(WINAPI, BOOL, HidD_GetAttributes, (HANDLE, PHIDD_ATTRIBUTES));
+DLL_DECLARE(WINAPI, VOID, HidD_GetHidGuid, (LPGUID));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetPreparsedData, (HANDLE, PHIDP_PREPARSED_DATA *));
+DLL_DECLARE(WINAPI, BOOL, HidD_FreePreparsedData, (PHIDP_PREPARSED_DATA));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetManufacturerString, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetProductString, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetSerialNumberString, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, LONG, HidP_GetCaps, (PHIDP_PREPARSED_DATA, PHIDP_CAPS));
+DLL_DECLARE(WINAPI, BOOL, HidD_SetNumInputBuffers, (HANDLE, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_SetFeature, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetFeature, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetPhysicalDescriptor, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_GetInputReport, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_SetOutputReport, (HANDLE, PVOID, ULONG));
+DLL_DECLARE(WINAPI, BOOL, HidD_FlushQueue, (HANDLE));
+DLL_DECLARE(WINAPI, BOOL, HidP_GetValueCaps, (HIDP_REPORT_TYPE, PHIDP_VALUE_CAPS, PULONG, PHIDP_PREPARSED_DATA));
--- /dev/null
+/*
+ * libusb strerror code
+ * Copyright © 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <locale.h>
+#include <stdlib.h>
+#include <string.h>
+#if defined(HAVE_STRINGS_H)
+#include <strings.h>
+#endif
+
+#include "libusbi.h"
+
+#if defined(_MSC_VER)
+#define strncasecmp _strnicmp
+#endif
+
+static size_t usbi_locale = 0;
+
+/** \ingroup misc
+ * How to add a new \ref libusb_strerror() translation:
+ * <ol>
+ * <li> Download the latest \c strerror.c from:<br>
+ * https://raw.github.com/libusb/libusb/master/libusb/sterror.c </li>
+ * <li> Open the file in an UTF-8 capable editor </li>
+ * <li> Add the 2 letter <a href="http://en.wikipedia.org/wiki/List_of_ISO_639-1_codes">ISO 639-1</a>
+ * code for your locale at the end of \c usbi_locale_supported[]<br>
+ * Eg. for Chinese, you would add "zh" so that:
+ * \code... usbi_locale_supported[] = { "en", "nl", "fr" };\endcode
+ * becomes:
+ * \code... usbi_locale_supported[] = { "en", "nl", "fr", "zh" };\endcode </li>
+ * <li> Copy the <tt>{ / * English (en) * / ... }</tt> section and add it at the end of \c usbi_localized_errors<br>
+ * Eg. for Chinese, the last section of \c usbi_localized_errors could look like:
+ * \code
+ * }, { / * Chinese (zh) * /
+ * "Success",
+ * ...
+ * "Other error",
+ * }
+ * };\endcode </li>
+ * <li> Translate each of the English messages from the section you copied into your language </li>
+ * <li> Save the file (in UTF-8 format) and send it to \c libusb-devel\@lists.sourceforge.net </li>
+ * </ol>
+ */
+
+static const char* usbi_locale_supported[] = { "en", "nl", "fr", "ru" };
+static const char* usbi_localized_errors[ARRAYSIZE(usbi_locale_supported)][LIBUSB_ERROR_COUNT] = {
+ { /* English (en) */
+ "Success",
+ "Input/Output Error",
+ "Invalid parameter",
+ "Access denied (insufficient permissions)",
+ "No such device (it may have been disconnected)",
+ "Entity not found",
+ "Resource busy",
+ "Operation timed out",
+ "Overflow",
+ "Pipe error",
+ "System call interrupted (perhaps due to signal)",
+ "Insufficient memory",
+ "Operation not supported or unimplemented on this platform",
+ "Other error",
+ }, { /* Dutch (nl) */
+ "Gelukt",
+ "Invoer-/uitvoerfout",
+ "Ongeldig argument",
+ "Toegang geweigerd (onvoldoende toegangsrechten)",
+ "Apparaat bestaat niet (verbinding met apparaat verbroken?)",
+ "Niet gevonden",
+ "Apparaat of hulpbron is bezig",
+ "Bewerking verlopen",
+ "Waarde is te groot",
+ "Gebroken pijp",
+ "Onderbroken systeemaanroep",
+ "Onvoldoende geheugen beschikbaar",
+ "Bewerking wordt niet ondersteund",
+ "Andere fout",
+ }, { /* French (fr) */
+ "Succès",
+ "Erreur d'entrée/sortie",
+ "Paramètre invalide",
+ "Accès refusé (permissions insuffisantes)",
+ "Périphérique introuvable (peut-être déconnecté)",
+ "Elément introuvable",
+ "Resource déjà occupée",
+ "Operation expirée",
+ "Débordement",
+ "Erreur de pipe",
+ "Appel système abandonné (peut-être à cause d’un signal)",
+ "Mémoire insuffisante",
+ "Opération non supportée or non implémentée sur cette plateforme",
+ "Autre erreur",
+ }, { /* Russian (ru) */
+ "Успех",
+ "Ошибка ввода/вывода",
+ "Неверный параметр",
+ "Доступ запрещён (не хватает прав)",
+ "Устройство отсутствует (возможно, оно было отсоединено)",
+ "Элемент не найден",
+ "Ресурс занят",
+ "Истекло время ожидания операции",
+ "Переполнение",
+ "Ошибка канала",
+ "Системный вызов прерван (возможно, сигналом)",
+ "Память исчерпана",
+ "Операция не поддерживается данной платформой",
+ "Неизвестная ошибка"
+ }
+};
+
+/** \ingroup misc
+ * Set the language, and only the language, not the encoding! used for
+ * translatable libusb messages.
+ *
+ * This takes a locale string in the default setlocale format: lang[-region]
+ * or lang[_country_region][.codeset]. Only the lang part of the string is
+ * used, and only 2 letter ISO 639-1 codes are accepted for it, such as "de".
+ * The optional region, country_region or codeset parts are ignored. This
+ * means that functions which return translatable strings will NOT honor the
+ * specified encoding.
+ * All strings returned are encoded as UTF-8 strings.
+ *
+ * If libusb_setlocale() is not called, all messages will be in English.
+ *
+ * The following functions return translatable strings: libusb_strerror().
+ * Note that the libusb log messages controlled through libusb_set_debug()
+ * are not translated, they are always in English.
+ *
+ * For POSIX UTF-8 environments if you want libusb to follow the standard
+ * locale settings, call libusb_setlocale(setlocale(LC_MESSAGES, NULL)),
+ * after your app has done its locale setup.
+ *
+ * \param locale locale-string in the form of lang[_country_region][.codeset]
+ * or lang[-region], where lang is a 2 letter ISO 639-1 code
+ * \returns LIBUSB_SUCCESS on success
+ * \returns LIBUSB_ERROR_INVALID_PARAM if the locale doesn't meet the requirements
+ * \returns LIBUSB_ERROR_NOT_FOUND if the requested language is not supported
+ * \returns a LIBUSB_ERROR code on other errors
+ */
+
+int API_EXPORTED libusb_setlocale(const char *locale)
+{
+ size_t i;
+
+ if ( (locale == NULL) || (strlen(locale) < 2)
+ || ((strlen(locale) > 2) && (locale[2] != '-') && (locale[2] != '_') && (locale[2] != '.')) )
+ return LIBUSB_ERROR_INVALID_PARAM;
+
+ for (i=0; i<ARRAYSIZE(usbi_locale_supported); i++) {
+ if (strncasecmp(usbi_locale_supported[i], locale, 2) == 0)
+ break;
+ }
+ if (i >= ARRAYSIZE(usbi_locale_supported)) {
+ return LIBUSB_ERROR_NOT_FOUND;
+ }
+
+ usbi_locale = i;
+
+ return LIBUSB_SUCCESS;
+}
+
+/** \ingroup misc
+ * Returns a constant string with a short description of the given error code,
+ * this description is intended for displaying to the end user and will be in
+ * the language set by libusb_setlocale().
+ *
+ * The returned string is encoded in UTF-8.
+ *
+ * The messages always start with a capital letter and end without any dot.
+ * The caller must not free() the returned string.
+ *
+ * \param errcode the error code whose description is desired
+ * \returns a short description of the error code in UTF-8 encoding
+ */
+DEFAULT_VISIBILITY const char* LIBUSB_CALL libusb_strerror(enum libusb_error errcode)
+{
+ int errcode_index = -errcode;
+
+ if ((errcode_index < 0) || (errcode_index >= LIBUSB_ERROR_COUNT)) {
+ /* "Other Error", which should always be our last message, is returned */
+ errcode_index = LIBUSB_ERROR_COUNT - 1;
+ }
+
+ return usbi_localized_errors[usbi_locale][errcode_index];
+}
--- /dev/null
+/*
+ * Synchronous I/O functions for libusb
+ * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#include <errno.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "libusbi.h"
+
+/**
+ * @defgroup syncio Synchronous device I/O
+ *
+ * This page documents libusb's synchronous (blocking) API for USB device I/O.
+ * This interface is easy to use but has some limitations. More advanced users
+ * may wish to consider using the \ref asyncio "asynchronous I/O API" instead.
+ */
+
+static void LIBUSB_CALL sync_transfer_cb(struct libusb_transfer *transfer)
+{
+ int *completed = transfer->user_data;
+ *completed = 1;
+ usbi_dbg("actual_length=%d", transfer->actual_length);
+ /* caller interprets result and frees transfer */
+}
+
+static void sync_transfer_wait_for_completion(struct libusb_transfer *transfer)
+{
+ int r, *completed = transfer->user_data;
+ struct libusb_context *ctx = HANDLE_CTX(transfer->dev_handle);
+
+ while (!*completed) {
+ r = libusb_handle_events_completed(ctx, completed);
+ if (r < 0) {
+ if (r == LIBUSB_ERROR_INTERRUPTED)
+ continue;
+ usbi_err(ctx, "libusb_handle_events failed: %s, cancelling transfer and retrying",
+ libusb_error_name(r));
+ libusb_cancel_transfer(transfer);
+ continue;
+ }
+ }
+}
+
+/** \ingroup syncio
+ * Perform a USB control transfer.
+ *
+ * The direction of the transfer is inferred from the bmRequestType field of
+ * the setup packet.
+ *
+ * The wValue, wIndex and wLength fields values should be given in host-endian
+ * byte order.
+ *
+ * \param dev_handle a handle for the device to communicate with
+ * \param bmRequestType the request type field for the setup packet
+ * \param bRequest the request field for the setup packet
+ * \param wValue the value field for the setup packet
+ * \param wIndex the index field for the setup packet
+ * \param data a suitably-sized data buffer for either input or output
+ * (depending on direction bits within bmRequestType)
+ * \param wLength the length field for the setup packet. The data buffer should
+ * be at least this size.
+ * \param timeout timeout (in millseconds) that this function should wait
+ * before giving up due to no response being received. For an unlimited
+ * timeout, use value 0.
+ * \returns on success, the number of bytes actually transferred
+ * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out
+ * \returns LIBUSB_ERROR_PIPE if the control request was not supported by the
+ * device
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failures
+ */
+int API_EXPORTED libusb_control_transfer(libusb_device_handle *dev_handle,
+ uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
+ unsigned char *data, uint16_t wLength, unsigned int timeout)
+{
+ struct libusb_transfer *transfer = libusb_alloc_transfer(0);
+ unsigned char *buffer;
+ int completed = 0;
+ int r;
+
+ if (!transfer)
+ return LIBUSB_ERROR_NO_MEM;
+
+ buffer = (unsigned char*) malloc(LIBUSB_CONTROL_SETUP_SIZE + wLength);
+ if (!buffer) {
+ libusb_free_transfer(transfer);
+ return LIBUSB_ERROR_NO_MEM;
+ }
+
+ libusb_fill_control_setup(buffer, bmRequestType, bRequest, wValue, wIndex,
+ wLength);
+ if ((bmRequestType & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_OUT)
+ memcpy(buffer + LIBUSB_CONTROL_SETUP_SIZE, data, wLength);
+
+ libusb_fill_control_transfer(transfer, dev_handle, buffer,
+ sync_transfer_cb, &completed, timeout);
+ transfer->flags = LIBUSB_TRANSFER_FREE_BUFFER;
+ r = libusb_submit_transfer(transfer);
+ if (r < 0) {
+ libusb_free_transfer(transfer);
+ return r;
+ }
+
+ sync_transfer_wait_for_completion(transfer);
+
+ if ((bmRequestType & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_IN)
+ memcpy(data, libusb_control_transfer_get_data(transfer),
+ transfer->actual_length);
+
+ switch (transfer->status) {
+ case LIBUSB_TRANSFER_COMPLETED:
+ r = transfer->actual_length;
+ break;
+ case LIBUSB_TRANSFER_TIMED_OUT:
+ r = LIBUSB_ERROR_TIMEOUT;
+ break;
+ case LIBUSB_TRANSFER_STALL:
+ r = LIBUSB_ERROR_PIPE;
+ break;
+ case LIBUSB_TRANSFER_NO_DEVICE:
+ r = LIBUSB_ERROR_NO_DEVICE;
+ break;
+ case LIBUSB_TRANSFER_OVERFLOW:
+ r = LIBUSB_ERROR_OVERFLOW;
+ break;
+ case LIBUSB_TRANSFER_ERROR:
+ case LIBUSB_TRANSFER_CANCELLED:
+ r = LIBUSB_ERROR_IO;
+ break;
+ default:
+ usbi_warn(HANDLE_CTX(dev_handle),
+ "unrecognised status code %d", transfer->status);
+ r = LIBUSB_ERROR_OTHER;
+ }
+
+ libusb_free_transfer(transfer);
+ return r;
+}
+
+static int do_sync_bulk_transfer(struct libusb_device_handle *dev_handle,
+ unsigned char endpoint, unsigned char *buffer, int length,
+ int *transferred, unsigned int timeout, unsigned char type)
+{
+ struct libusb_transfer *transfer = libusb_alloc_transfer(0);
+ int completed = 0;
+ int r;
+
+ if (!transfer)
+ return LIBUSB_ERROR_NO_MEM;
+
+ libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer, length,
+ sync_transfer_cb, &completed, timeout);
+ transfer->type = type;
+
+ r = libusb_submit_transfer(transfer);
+ if (r < 0) {
+ libusb_free_transfer(transfer);
+ return r;
+ }
+
+ sync_transfer_wait_for_completion(transfer);
+
+ *transferred = transfer->actual_length;
+ switch (transfer->status) {
+ case LIBUSB_TRANSFER_COMPLETED:
+ r = 0;
+ break;
+ case LIBUSB_TRANSFER_TIMED_OUT:
+ r = LIBUSB_ERROR_TIMEOUT;
+ break;
+ case LIBUSB_TRANSFER_STALL:
+ r = LIBUSB_ERROR_PIPE;
+ break;
+ case LIBUSB_TRANSFER_OVERFLOW:
+ r = LIBUSB_ERROR_OVERFLOW;
+ break;
+ case LIBUSB_TRANSFER_NO_DEVICE:
+ r = LIBUSB_ERROR_NO_DEVICE;
+ break;
+ case LIBUSB_TRANSFER_ERROR:
+ case LIBUSB_TRANSFER_CANCELLED:
+ r = LIBUSB_ERROR_IO;
+ break;
+ default:
+ usbi_warn(HANDLE_CTX(dev_handle),
+ "unrecognised status code %d", transfer->status);
+ r = LIBUSB_ERROR_OTHER;
+ }
+
+ libusb_free_transfer(transfer);
+ return r;
+}
+
+/** \ingroup syncio
+ * Perform a USB bulk transfer. The direction of the transfer is inferred from
+ * the direction bits of the endpoint address.
+ *
+ * For bulk reads, the <tt>length</tt> field indicates the maximum length of
+ * data you are expecting to receive. If less data arrives than expected,
+ * this function will return that data, so be sure to check the
+ * <tt>transferred</tt> output parameter.
+ *
+ * You should also check the <tt>transferred</tt> parameter for bulk writes.
+ * Not all of the data may have been written.
+ *
+ * Also check <tt>transferred</tt> when dealing with a timeout error code.
+ * libusb may have to split your transfer into a number of chunks to satisfy
+ * underlying O/S requirements, meaning that the timeout may expire after
+ * the first few chunks have completed. libusb is careful not to lose any data
+ * that may have been transferred; do not assume that timeout conditions
+ * indicate a complete lack of I/O.
+ *
+ * \param dev_handle a handle for the device to communicate with
+ * \param endpoint the address of a valid endpoint to communicate with
+ * \param data a suitably-sized data buffer for either input or output
+ * (depending on endpoint)
+ * \param length for bulk writes, the number of bytes from data to be sent. for
+ * bulk reads, the maximum number of bytes to receive into the data buffer.
+ * \param transferred output location for the number of bytes actually
+ * transferred.
+ * \param timeout timeout (in millseconds) that this function should wait
+ * before giving up due to no response being received. For an unlimited
+ * timeout, use value 0.
+ *
+ * \returns 0 on success (and populates <tt>transferred</tt>)
+ * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out (and populates
+ * <tt>transferred</tt>)
+ * \returns LIBUSB_ERROR_PIPE if the endpoint halted
+ * \returns LIBUSB_ERROR_OVERFLOW if the device offered more data, see
+ * \ref packetoverflow
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other failures
+ */
+int API_EXPORTED libusb_bulk_transfer(struct libusb_device_handle *dev_handle,
+ unsigned char endpoint, unsigned char *data, int length, int *transferred,
+ unsigned int timeout)
+{
+ return do_sync_bulk_transfer(dev_handle, endpoint, data, length,
+ transferred, timeout, LIBUSB_TRANSFER_TYPE_BULK);
+}
+
+/** \ingroup syncio
+ * Perform a USB interrupt transfer. The direction of the transfer is inferred
+ * from the direction bits of the endpoint address.
+ *
+ * For interrupt reads, the <tt>length</tt> field indicates the maximum length
+ * of data you are expecting to receive. If less data arrives than expected,
+ * this function will return that data, so be sure to check the
+ * <tt>transferred</tt> output parameter.
+ *
+ * You should also check the <tt>transferred</tt> parameter for interrupt
+ * writes. Not all of the data may have been written.
+ *
+ * Also check <tt>transferred</tt> when dealing with a timeout error code.
+ * libusb may have to split your transfer into a number of chunks to satisfy
+ * underlying O/S requirements, meaning that the timeout may expire after
+ * the first few chunks have completed. libusb is careful not to lose any data
+ * that may have been transferred; do not assume that timeout conditions
+ * indicate a complete lack of I/O.
+ *
+ * The default endpoint bInterval value is used as the polling interval.
+ *
+ * \param dev_handle a handle for the device to communicate with
+ * \param endpoint the address of a valid endpoint to communicate with
+ * \param data a suitably-sized data buffer for either input or output
+ * (depending on endpoint)
+ * \param length for bulk writes, the number of bytes from data to be sent. for
+ * bulk reads, the maximum number of bytes to receive into the data buffer.
+ * \param transferred output location for the number of bytes actually
+ * transferred.
+ * \param timeout timeout (in millseconds) that this function should wait
+ * before giving up due to no response being received. For an unlimited
+ * timeout, use value 0.
+ *
+ * \returns 0 on success (and populates <tt>transferred</tt>)
+ * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out
+ * \returns LIBUSB_ERROR_PIPE if the endpoint halted
+ * \returns LIBUSB_ERROR_OVERFLOW if the device offered more data, see
+ * \ref packetoverflow
+ * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * \returns another LIBUSB_ERROR code on other error
+ */
+int API_EXPORTED libusb_interrupt_transfer(
+ struct libusb_device_handle *dev_handle, unsigned char endpoint,
+ unsigned char *data, int length, int *transferred, unsigned int timeout)
+{
+ return do_sync_bulk_transfer(dev_handle, endpoint, data, length,
+ transferred, timeout, LIBUSB_TRANSFER_TYPE_INTERRUPT);
+}
--- /dev/null
+/* This file is parsed by m4 and windres and RC.EXE so please keep it simple. */
+#include "version_nano.h"
+#ifndef LIBUSB_MAJOR
+#define LIBUSB_MAJOR 1
+#endif
+#ifndef LIBUSB_MINOR
+#define LIBUSB_MINOR 0
+#endif
+#ifndef LIBUSB_MICRO
+#define LIBUSB_MICRO 20
+#endif
+#ifndef LIBUSB_NANO
+#define LIBUSB_NANO 0
+#endif
+/* LIBUSB_RC is the release candidate suffix. Should normally be empty. */
+#ifndef LIBUSB_RC
+#define LIBUSB_RC ""
+#endif
--- /dev/null
+#define LIBUSB_NANO 11004
--- /dev/null
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-warning|--no-warn)
+ opt_warning=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$absdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ # Remove ${wl} instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ func_resolve_sysroot "$deplib"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
--- /dev/null
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
--- /dev/null
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
--- /dev/null
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
--- /dev/null
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
--- /dev/null
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
--- /dev/null
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+fi
+
+case $1 in
+
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
+
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+
+Supported PROGRAM values:
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+/* config.h. Manual config for MSVC. */
+
+#ifndef _MSC_VER
+#warn "msvc/config.h shouldn't be included for your development environment."
+#error "Please make sure the msvc/ directory is removed from your build path."
+#endif
+
+/* Disable: warning C4200: nonstandard extension used : zero-sized array in struct/union */
+#pragma warning(disable:4200)
+/* Disable: warning C6258: Using TerminateThread does not allow proper thread clean up */
+#pragma warning(disable: 6258)
+#if defined(_PREFAST_)
+/* Disable "Banned API" errors when using the MS's WDK OACR/Prefast */
+#pragma warning(disable:28719)
+/* Disable "The function 'InitializeCriticalSection' must be called from within a try/except block" */
+#pragma warning(disable:28125)
+#endif
+
+/* Default visibility */
+#define DEFAULT_VISIBILITY /**/
+
+/* Enable global message logging */
+#define ENABLE_LOGGING 1
+
+/* Uncomment to start with debug message logging enabled */
+// #define ENABLE_DEBUG_LOGGING 1
+
+/* Uncomment to enabling logging to system log */
+// #define USE_SYSTEM_LOGGING_FACILITY
+
+/* type of second poll() argument */
+#define POLL_NFDS_TYPE unsigned int
+
+/* Windows/WinCE backend */
+#if defined(_WIN32_WCE)
+#define OS_WINCE 1
+#define HAVE_MISSING_H
+#else
+#define OS_WINDOWS 1
+#define HAVE_SIGNAL_H 1
+#define HAVE_SYS_TYPES_H 1
+#endif
--- /dev/null
+@echo off
+::# default builds static library.
+::# you can pass the following arguments (case insensitive):
+::# - "DLL" to build a DLL instead of a static library
+::# - "/MT" to build a static library compatible with MSVC's /MT option (LIBCMT vs MSVCRT)
+
+if Test%BUILD_ALT_DIR%==Test goto usage
+
+::# process commandline parameters
+set TARGET=LIBRARY
+set STATIC_LIBC=
+set version=1.0
+set PWD=%~dp0
+set BUILD_CMD=build -bcwgZ -M2
+
+if "%1" == "" goto no_more_args
+::# /I for case insensitive
+if /I Test%1==TestDLL set TARGET=DYNLINK
+if /I Test%1==Test/MT set STATIC_LIBC=1
+:no_more_args
+
+cd ..\libusb\os
+echo TARGETTYPE=%TARGET% > target
+copy target+..\..\msvc\libusb_sources sources >NUL 2>&1
+del target
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..
+
+set cpudir=i386
+set destType=Win32
+if %_BUILDARCH%==x86 goto isI386
+set cpudir=amd64
+set destType=x64
+:isI386
+
+set srcPath=libusb\os\obj%BUILD_ALT_DIR%\%cpudir%
+
+set dstPath=%destType%\Debug
+if %DDKBUILDENV%==chk goto isDebug
+set dstPath=%destType%\Release
+:isDebug
+
+if exist %destType% goto md2
+mkdir %destType%
+:md2
+if exist %dstPath% goto md3
+mkdir %dstPath%
+:md3
+if exist %dstPath%\dll goto md4
+mkdir %dstPath%\dll
+:md4
+if exist %dstPath%\lib goto md5
+md %dstPath%\lib
+:md5
+if exist %dstPath%\examples goto md6
+md %dstPath%\examples
+:md6
+@echo on
+
+@if /I NOT Test%1==TestDLL goto copylib
+copy %srcPath%\libusb-%version%.dll %dstPath%\dll
+copy %srcPath%\libusb-%version%.pdb %dstPath%\dll
+:copylib
+copy %srcPath%\libusb-%version%.lib %dstPath%\lib
+
+@echo off
+
+if exist examples\listdevs_ddkbuild goto md7
+md examples\listdevs_ddkbuild
+:md7
+
+cd examples\listdevs_ddkbuild
+copy ..\..\msvc\listdevs_sources sources >NUL 2>&1
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..
+
+set srcPath=examples\listdevs_ddkbuild\obj%BUILD_ALT_DIR%\%cpudir%
+@echo on
+
+copy %srcPath%\listdevs.exe %dstPath%\examples
+copy %srcPath%\listdevs.pdb %dstPath%\examples
+
+@echo off
+
+if exist examples\xusb_ddkbuild goto md8
+md examples\xusb_ddkbuild
+:md8
+
+cd examples\xusb_ddkbuild
+copy ..\..\msvc\xusb_sources sources >NUL 2>&1
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..
+
+set srcPath=examples\xusb_ddkbuild\obj%BUILD_ALT_DIR%\%cpudir%
+@echo on
+
+copy %srcPath%\xusb.exe %dstPath%\examples
+copy %srcPath%\xusb.pdb %dstPath%\examples
+
+@echo off
+
+if exist examples\getopt\getopt_ddkbuild goto md9
+md examples\getopt\getopt_ddkbuild
+:md9
+
+cd examples\getopt\getopt_ddkbuild
+copy ..\..\..\msvc\getopt_sources sources >NUL 2>&1
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..\..
+
+if exist examples\fxload_ddkbuild goto md10
+md examples\fxload_ddkbuild
+:md10
+
+cd examples\fxload_ddkbuild
+copy ..\..\msvc\fxload_sources sources >NUL 2>&1
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..
+
+set srcPath=examples\fxload_ddkbuild\obj%BUILD_ALT_DIR%\%cpudir%
+@echo on
+
+copy %srcPath%\fxload.exe %dstPath%\examples
+copy %srcPath%\fxload.pdb %dstPath%\examples
+
+@echo off
+
+if exist examples\hotplugtest_ddkbuild goto md11
+md examples\hotplugtest_ddkbuild
+:md11
+
+cd examples\hotplugtest_ddkbuild
+copy ..\..\msvc\hotplugtest_sources sources >NUL 2>&1
+@echo on
+%BUILD_CMD%
+@echo off
+if errorlevel 1 goto builderror
+cd ..\..
+
+set srcPath=examples\hotplugtest_ddkbuild\obj%BUILD_ALT_DIR%\%cpudir%
+@echo on
+
+copy %srcPath%\hotplugtest.exe %dstPath%\examples
+copy %srcPath%\hotplugtest.pdb %dstPath%\examples
+
+@echo off
+
+cd msvc
+goto done
+
+:usage
+echo ddk_build must be run in a WDK build environment
+pause
+goto done
+
+:builderror
+echo Build failed
+
+:done
+cd %PWD%
--- /dev/null
+/*
+ * errno.h
+ * This file has no copyright assigned and is placed in the Public Domain.
+ * This file is a part of the mingw-runtime package.
+ * No warranty is given; refer to the file DISCLAIMER within the package.
+ *
+ * Error numbers and access to error reporting.
+ *
+ */
+
+#ifndef _ERRNO_H_
+#define _ERRNO_H_
+
+#include <crtdefs.h>
+
+/*
+ * Error numbers.
+ * TODO: Can't be sure of some of these assignments, I guessed from the
+ * names given by strerror and the defines in the Cygnus errno.h. A lot
+ * of the names from the Cygnus errno.h are not represented, and a few
+ * of the descriptions returned by strerror do not obviously match
+ * their error naming.
+ */
+#define EPERM 1 /* Operation not permitted */
+#define ENOFILE 2 /* No such file or directory */
+#define ENOENT 2
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted function call */
+#define EIO 5 /* Input/output error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file descriptor */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Resource temporarily unavailable */
+#define ENOMEM 12 /* Not enough space */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+/* 15 - Unknown Error */
+#define EBUSY 16 /* strerror reports "Resource device" */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Improper link (cross-device link?) */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* Too many open files in system */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Inappropriate I/O control operation */
+/* 26 - Unknown Error */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Invalid seek (seek on a pipe?) */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Domain error (math functions) */
+#define ERANGE 34 /* Result too large (possibly too small) */
+/* 35 - Unknown Error */
+#define EDEADLOCK 36 /* Resource deadlock avoided (non-Cyg) */
+#define EDEADLK 36
+#if 0
+/* 37 - Unknown Error */
+#define ENAMETOOLONG 38 /* Filename too long (91 in Cyg?) */
+#define ENOLCK 39 /* No locks available (46 in Cyg?) */
+#define ENOSYS 40 /* Function not implemented (88 in Cyg?) */
+#define ENOTEMPTY 41 /* Directory not empty (90 in Cyg?) */
+#define EILSEQ 42 /* Illegal byte sequence */
+#endif
+
+/*
+ * NOTE: ENAMETOOLONG and ENOTEMPTY conflict with definitions in the
+ * sockets.h header provided with windows32api-0.1.2.
+ * You should go and put an #if 0 ... #endif around the whole block
+ * of errors (look at the comment above them).
+ */
+
+#ifndef RC_INVOKED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Definitions of errno. For _doserrno, sys_nerr and * sys_errlist, see
+ * stdlib.h.
+ */
+#if defined(_UWIN) || defined(_WIN32_WCE)
+#undef errno
+extern int errno;
+#else
+_CRTIMP int* __cdecl _errno(void);
+#define errno (*_errno())
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* Not RC_INVOKED */
+
+#endif /* Not _ERRNO_H_ */
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>fxload</ProjectName>
+ <ProjectGuid>{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\ezusb.c" />
+ <ClCompile Include="..\examples\fxload.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ <ProjectReference Include="getopt_2010.vcxproj">
+ <Project>{ae83e1b4-ce06-47ee-b7a3-c3a1d7c2d71e}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\ezusb.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{651ff73d-037b-4903-8dd3-56e9950be25c}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\fxload.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\examples\ezusb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\ezusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>fxload</ProjectName>
+ <ProjectGuid>{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\ezusb.c" />
+ <ClCompile Include="..\examples\fxload.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2012.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ <ProjectReference Include="getopt_2012.vcxproj">
+ <Project>{ae83e1b4-ce06-47ee-b7a3-c3a1d7c2d71e}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\ezusb.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{651ff73d-037b-4903-8dd3-56e9950be25c}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\fxload.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\examples\ezusb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\ezusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>fxload</ProjectName>
+ <ProjectGuid>{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\examples\getopt;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;__GNU_LIBRARY__;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\ezusb.c" />
+ <ClCompile Include="..\examples\fxload.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2013.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ <ProjectReference Include="getopt_2013.vcxproj">
+ <Project>{ae83e1b4-ce06-47ee-b7a3-c3a1d7c2d71e}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\ezusb.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+TARGETNAME=fxload
+TARGETTYPE=PROGRAM
+386_STDCALL=0
+
+_NT_TARGET_VERSION= $(_NT_TARGET_VERSION_WINXP)
+
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+!IFDEF STATIC_LIBC
+USE_LIBCMT=1
+!ELSE
+USE_MSVCRT=1
+!ENDIF
+
+UMTYPE=console
+INCLUDES=..\..\msvc;..\..\libusb;..\getopt;$(DDK_INC_PATH)
+C_DEFINES=$(C_DEFINES) /D__GNU_LIBRARY__
+UMLIBS=..\..\libusb\os\obj$(BUILD_ALT_DIR)\*\libusb-1.0.lib \
+ ..\getopt\getopt_ddkbuild\obj$(BUILD_ALT_DIR)\*\getopt.lib
+SOURCES=..\ezusb.c \
+ ..\fxload.c
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9.00"
+ Name="getopt"
+ ProjectGUID="{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}"
+ RootNamespace="getopt"
+ TargetFrameworkVersion="196613"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib\getopt"
+ ConfigurationType="4"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ PreprocessorDefinitions="HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ RuntimeLibrary="1"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ IgnoreAllDefaultLibraries="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib\getopt"
+ ConfigurationType="4"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ PreprocessorDefinitions="HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="1"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ IgnoreAllDefaultLibraries="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib\getopt"
+ ConfigurationType="4"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ PreprocessorDefinitions="HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="0"
+ WarningLevel="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ IgnoreAllDefaultLibraries="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)$(PlatformName)\$(ConfigurationName)\lib\getopt"
+ ConfigurationType="4"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ PreprocessorDefinitions="HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="0"
+ WarningLevel="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ IgnoreAllDefaultLibraries="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\examples\getopt\getopt.c"
+ >
+ </File>
+ <File
+ RelativePath="..\examples\getopt\getopt1.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath="..\examples\getopt\getopt.h"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}</ProjectGuid>
+ <RootNamespace>getopt</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\getopt\getopt.c" />
+ <ClCompile Include="..\examples\getopt\getopt1.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\getopt\getopt.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\getopt\getopt.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\examples\getopt\getopt1.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\getopt\getopt.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}</ProjectGuid>
+ <RootNamespace>getopt</RootNamespace>
+ <ProjectName>getopt</ProjectName>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\getopt\getopt.c" />
+ <ClCompile Include="..\examples\getopt\getopt1.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\getopt\getopt.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\getopt\getopt.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\examples\getopt\getopt1.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\getopt\getopt.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}</ProjectGuid>
+ <RootNamespace>getopt</RootNamespace>
+ <ProjectName>getopt</ProjectName>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\getopt\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <PreprocessorDefinitions>HAVE_STRING_H;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\getopt\getopt.c" />
+ <ClCompile Include="..\examples\getopt\getopt1.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\examples\getopt\getopt.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+TARGETTYPE=LIBRARY
+TARGETNAME=getopt
+386_STDCALL=0
+
+_NT_TARGET_VERSION= $(_NT_TARGET_VERSION_WINXP)
+
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+USE_MSVCRT=1
+
+INCLUDES=$(DDK_INC_PATH)
+C_DEFINES = $(C_DEFINES) /DDDKBUILD /DHAVE_STRING_H
+
+TARGETLIBS=$(SDK_LIB_PATH)\kernel32.lib \
+ $(SDK_LIB_PATH)\user32.lib
+
+SOURCES=..\getopt1.c \
+ ..\getopt.c
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>hotplugtest</ProjectName>
+ <ProjectGuid>{99D2AC64-DC66-4422-91CE-6715C403C9E5}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\hotplugtest.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\hotplugtest.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>hotplugtest</ProjectName>
+ <ProjectGuid>{99D2AC64-DC66-4422-91CE-6715C403C9E5}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\hotplugtest.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2012.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\hotplugtest.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>hotplugtest</ProjectName>
+ <ProjectGuid>{99D2AC64-DC66-4422-91CE-6715C403C9E5}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\hotplugtest.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2013.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+TARGETNAME=hotplugtest
+TARGETTYPE=PROGRAM
+386_STDCALL=0
+
+_NT_TARGET_VERSION= $(_NT_TARGET_VERSION_WINXP)
+
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+!IFDEF STATIC_LIBC
+USE_LIBCMT=1
+!ELSE
+USE_MSVCRT=1
+!ENDIF
+
+UMTYPE=console
+INCLUDES=..\..\msvc;..\..\libusb;$(DDK_INC_PATH)
+UMLIBS=..\..\libusb\os\obj$(BUILD_ALT_DIR)\*\libusb-1.0.lib
+SOURCES=..\hotplugtest.c
--- /dev/null
+/**
+ * This file has no copyright assigned and is placed in the Public Domain.
+ * This file was original part of the w64 mingw-runtime package.
+ */
+
+/*
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * Modified for libusb/MSVC: Pete Batard <pbatard@gmail.com>
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ *
+ * This code is distributed in the hope that it will be useful but
+ * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
+ * DISCLAIMED. This includes but is not limited to warranties of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Date: 2010-04-02
+ */
+
+#ifndef _MSC_VER
+#error This header should only be used with Microsoft compilers
+#endif
+
+/* 7.8 Format conversion of integer types <inttypes.h> */
+
+#ifndef _INTTYPES_H_
+#define _INTTYPES_H_
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ intmax_t quot;
+ intmax_t rem;
+ } imaxdiv_t;
+
+
+/* 7.8.1 Macros for format specifiers
+ *
+ * MS runtime does not yet understand C9x standard "ll"
+ * length specifier. It appears to treat "ll" as "l".
+ * The non-standard I64 length specifier causes warning in GCC,
+ * but understood by MS runtime functions.
+ */
+
+/* fprintf macros for signed types */
+#define PRId8 "d"
+#define PRId16 "d"
+#define PRId32 "d"
+#define PRId64 "I64d"
+
+#define PRIdLEAST8 "d"
+#define PRIdLEAST16 "d"
+#define PRIdLEAST32 "d"
+#define PRIdLEAST64 "I64d"
+
+#define PRIdFAST8 "d"
+#define PRIdFAST16 "d"
+#define PRIdFAST32 "d"
+#define PRIdFAST64 "I64d"
+
+#define PRIdMAX "I64d"
+
+#define PRIi8 "i"
+#define PRIi16 "i"
+#define PRIi32 "i"
+#define PRIi64 "I64i"
+
+#define PRIiLEAST8 "i"
+#define PRIiLEAST16 "i"
+#define PRIiLEAST32 "i"
+#define PRIiLEAST64 "I64i"
+
+#define PRIiFAST8 "i"
+#define PRIiFAST16 "i"
+#define PRIiFAST32 "i"
+#define PRIiFAST64 "I64i"
+
+#define PRIiMAX "I64i"
+
+#define PRIo8 "o"
+#define PRIo16 "o"
+#define PRIo32 "o"
+#define PRIo64 "I64o"
+
+#define PRIoLEAST8 "o"
+#define PRIoLEAST16 "o"
+#define PRIoLEAST32 "o"
+#define PRIoLEAST64 "I64o"
+
+#define PRIoFAST8 "o"
+#define PRIoFAST16 "o"
+#define PRIoFAST32 "o"
+#define PRIoFAST64 "I64o"
+
+#define PRIoMAX "I64o"
+
+/* fprintf macros for unsigned types */
+#define PRIu8 "u"
+#define PRIu16 "u"
+#define PRIu32 "u"
+#define PRIu64 "I64u"
+
+
+#define PRIuLEAST8 "u"
+#define PRIuLEAST16 "u"
+#define PRIuLEAST32 "u"
+#define PRIuLEAST64 "I64u"
+
+#define PRIuFAST8 "u"
+#define PRIuFAST16 "u"
+#define PRIuFAST32 "u"
+#define PRIuFAST64 "I64u"
+
+#define PRIuMAX "I64u"
+
+#define PRIx8 "x"
+#define PRIx16 "x"
+#define PRIx32 "x"
+#define PRIx64 "I64x"
+
+#define PRIxLEAST8 "x"
+#define PRIxLEAST16 "x"
+#define PRIxLEAST32 "x"
+#define PRIxLEAST64 "I64x"
+
+#define PRIxFAST8 "x"
+#define PRIxFAST16 "x"
+#define PRIxFAST32 "x"
+#define PRIxFAST64 "I64x"
+
+#define PRIxMAX "I64x"
+
+#define PRIX8 "X"
+#define PRIX16 "X"
+#define PRIX32 "X"
+#define PRIX64 "I64X"
+
+#define PRIXLEAST8 "X"
+#define PRIXLEAST16 "X"
+#define PRIXLEAST32 "X"
+#define PRIXLEAST64 "I64X"
+
+#define PRIXFAST8 "X"
+#define PRIXFAST16 "X"
+#define PRIXFAST32 "X"
+#define PRIXFAST64 "I64X"
+
+#define PRIXMAX "I64X"
+
+/*
+ * fscanf macros for signed int types
+ * NOTE: if 32-bit int is used for int_fast8_t and int_fast16_t
+ * (see stdint.h, 7.18.1.3), FAST8 and FAST16 should have
+ * no length identifiers
+ */
+
+#define SCNd16 "hd"
+#define SCNd32 "d"
+#define SCNd64 "I64d"
+
+#define SCNdLEAST16 "hd"
+#define SCNdLEAST32 "d"
+#define SCNdLEAST64 "I64d"
+
+#define SCNdFAST16 "hd"
+#define SCNdFAST32 "d"
+#define SCNdFAST64 "I64d"
+
+#define SCNdMAX "I64d"
+
+#define SCNi16 "hi"
+#define SCNi32 "i"
+#define SCNi64 "I64i"
+
+#define SCNiLEAST16 "hi"
+#define SCNiLEAST32 "i"
+#define SCNiLEAST64 "I64i"
+
+#define SCNiFAST16 "hi"
+#define SCNiFAST32 "i"
+#define SCNiFAST64 "I64i"
+
+#define SCNiMAX "I64i"
+
+#define SCNo16 "ho"
+#define SCNo32 "o"
+#define SCNo64 "I64o"
+
+#define SCNoLEAST16 "ho"
+#define SCNoLEAST32 "o"
+#define SCNoLEAST64 "I64o"
+
+#define SCNoFAST16 "ho"
+#define SCNoFAST32 "o"
+#define SCNoFAST64 "I64o"
+
+#define SCNoMAX "I64o"
+
+#define SCNx16 "hx"
+#define SCNx32 "x"
+#define SCNx64 "I64x"
+
+#define SCNxLEAST16 "hx"
+#define SCNxLEAST32 "x"
+#define SCNxLEAST64 "I64x"
+
+#define SCNxFAST16 "hx"
+#define SCNxFAST32 "x"
+#define SCNxFAST64 "I64x"
+
+#define SCNxMAX "I64x"
+
+/* fscanf macros for unsigned int types */
+
+#define SCNu16 "hu"
+#define SCNu32 "u"
+#define SCNu64 "I64u"
+
+#define SCNuLEAST16 "hu"
+#define SCNuLEAST32 "u"
+#define SCNuLEAST64 "I64u"
+
+#define SCNuFAST16 "hu"
+#define SCNuFAST32 "u"
+#define SCNuFAST64 "I64u"
+
+#define SCNuMAX "I64u"
+
+#ifdef _WIN64
+#define PRIdPTR "I64d"
+#define PRIiPTR "I64i"
+#define PRIoPTR "I64o"
+#define PRIuPTR "I64u"
+#define PRIxPTR "I64x"
+#define PRIXPTR "I64X"
+#define SCNdPTR "I64d"
+#define SCNiPTR "I64i"
+#define SCNoPTR "I64o"
+#define SCNxPTR "I64x"
+#define SCNuPTR "I64u"
+#else
+#define PRIdPTR "d"
+#define PRIiPTR "i"
+#define PRIoPTR "o"
+#define PRIuPTR "u"
+#define PRIxPTR "x"
+#define PRIXPTR "X"
+#define SCNdPTR "d"
+#define SCNiPTR "i"
+#define SCNoPTR "o"
+#define SCNxPTR "x"
+ #define SCNuPTR "u"
+#endif
+
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+/*
+ * no length modifier for char types prior to C9x
+ * MS runtime scanf appears to treat "hh" as "h"
+ */
+
+/* signed char */
+#define SCNd8 "hhd"
+#define SCNdLEAST8 "hhd"
+#define SCNdFAST8 "hhd"
+
+#define SCNi8 "hhi"
+#define SCNiLEAST8 "hhi"
+#define SCNiFAST8 "hhi"
+
+#define SCNo8 "hho"
+#define SCNoLEAST8 "hho"
+#define SCNoFAST8 "hho"
+
+#define SCNx8 "hhx"
+#define SCNxLEAST8 "hhx"
+#define SCNxFAST8 "hhx"
+
+/* unsigned char */
+#define SCNu8 "hhu"
+#define SCNuLEAST8 "hhu"
+#define SCNuFAST8 "hhu"
+#endif /* __STDC_VERSION__ >= 199901 */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ndef _INTTYPES_H */
--- /dev/null
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "libusb_dll"=".\libusb_dll.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "libusb_static"=".\libusb_static.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "listdevs"=".\listdevs.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+ Begin Project Dependency
+ Project_Dep_Name libusb_static
+ End Project Dependency
+}}}
+
+###############################################################################
+
+Project: "xusb"=".\xusb.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+ Begin Project Dependency
+ Project_Dep_Name libusb_static
+ End Project Dependency
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb_static_2005.vcproj", "{5AB6B770-1925-48D5-ABC2-930F3259C020}"
+ ProjectSection(WebsiteProperties) = preProject
+ Debug.AspNetCompiler.Debug = "True"
+ Release.AspNetCompiler.Debug = "False"
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (dll)", "libusb_dll_2005.vcproj", "{8224C054-5968-4238-832C-167155E7ECC3}"
+ ProjectSection(WebsiteProperties) = preProject
+ Debug.AspNetCompiler.Debug = "True"
+ Release.AspNetCompiler.Debug = "False"
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "listdevs", "listdevs_2005.vcproj", "{98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}"
+ ProjectSection(WebsiteProperties) = preProject
+ Debug.AspNetCompiler.Debug = "True"
+ Release.AspNetCompiler.Debug = "False"
+ EndProjectSection
+ ProjectSection(ProjectDependencies) = postProject
+ {5AB6B770-1925-48D5-ABC2-930F3259C020} = {5AB6B770-1925-48D5-ABC2-930F3259C020}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "xusb", "xusb_2005.vcproj", "{08A6FA39-21B7-4A05-9252-2F9864A5E5A4}"
+ ProjectSection(WebsiteProperties) = preProject
+ Debug.AspNetCompiler.Debug = "True"
+ Release.AspNetCompiler.Debug = "False"
+ EndProjectSection
+ ProjectSection(ProjectDependencies) = postProject
+ {5AB6B770-1925-48D5-ABC2-930F3259C020} = {5AB6B770-1925-48D5-ABC2-930F3259C020}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "stress", "stress_2005.vcproj", "{53942EFF-C810-458D-B3CB-EE5CE9F1E781}"
+ ProjectSection(WebsiteProperties) = preProject
+ Debug.AspNetCompiler.Debug = "True"
+ Release.AspNetCompiler.Debug = "False"
+ EndProjectSection
+ ProjectSection(ProjectDependencies) = postProject
+ {5AB6B770-1925-48D5-ABC2-930F3259C020} = {5AB6B770-1925-48D5-ABC2-930F3259C020}
+ EndProjectSection
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Debug|Win32.ActiveCfg = Debug|Win32
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Debug|Win32.Build.0 = Debug|Win32
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Debug|x64.ActiveCfg = Debug|x64
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Debug|x64.Build.0 = Debug|x64
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Release|Win32.ActiveCfg = Release|Win32
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Release|Win32.Build.0 = Release|Win32
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Release|x64.ActiveCfg = Release|x64
+ {5AB6B770-1925-48D5-ABC2-930F3259C020}.Release|x64.Build.0 = Release|x64
+ {8224C054-5968-4238-832C-167155E7ECC3}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8224C054-5968-4238-832C-167155E7ECC3}.Debug|Win32.Build.0 = Debug|Win32
+ {8224C054-5968-4238-832C-167155E7ECC3}.Debug|x64.ActiveCfg = Debug|x64
+ {8224C054-5968-4238-832C-167155E7ECC3}.Debug|x64.Build.0 = Debug|x64
+ {8224C054-5968-4238-832C-167155E7ECC3}.Release|Win32.ActiveCfg = Release|Win32
+ {8224C054-5968-4238-832C-167155E7ECC3}.Release|Win32.Build.0 = Release|Win32
+ {8224C054-5968-4238-832C-167155E7ECC3}.Release|x64.ActiveCfg = Release|x64
+ {8224C054-5968-4238-832C-167155E7ECC3}.Release|x64.Build.0 = Release|x64
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Debug|Win32.ActiveCfg = Debug|Win32
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Debug|Win32.Build.0 = Debug|Win32
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Debug|x64.ActiveCfg = Debug|x64
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Debug|x64.Build.0 = Debug|x64
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Release|Win32.ActiveCfg = Release|Win32
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Release|Win32.Build.0 = Release|Win32
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Release|x64.ActiveCfg = Release|x64
+ {98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}.Release|x64.Build.0 = Release|x64
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Debug|Win32.ActiveCfg = Debug|Win32
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Debug|Win32.Build.0 = Debug|Win32
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Debug|x64.ActiveCfg = Debug|x64
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Debug|x64.Build.0 = Debug|x64
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Release|Win32.ActiveCfg = Release|Win32
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Release|Win32.Build.0 = Release|Win32
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Release|x64.ActiveCfg = Release|x64
+ {08A6FA39-21B7-4A05-9252-2F9864A5E5A4}.Release|x64.Build.0 = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.ActiveCfg = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.Build.0 = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.ActiveCfg = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.Build.0 = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.ActiveCfg = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.Build.0 = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.ActiveCfg = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.Build.0 = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb_static_2010.vcxproj", "{349EE8F9-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (dll)", "libusb_dll_2010.vcxproj", "{349EE8FA-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "listdevs", "listdevs_2010.vcxproj", "{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "xusb", "xusb_2010.vcxproj", "{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fxload", "fxload_2010.vcxproj", "{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}"
+ ProjectSection(ProjectDependencies) = postProject
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E} = {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "getopt", "getopt_2010.vcxproj", "{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "stress", "stress_2010.vcxproj", "{53942EFF-C810-458D-B3CB-EE5CE9F1E781}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "hotplugtest", "hotplugtest_2010.vcxproj", "{99D2AC64-DC66-4422-91CE-6715C403C9E5}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.Build.0 = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.Build.0 = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.ActiveCfg = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.Build.0 = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.ActiveCfg = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.Build.0 = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.ActiveCfg = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.Build.0 = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.ActiveCfg = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.Build.0 = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.ActiveCfg = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.Build.0 = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.ActiveCfg = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.Build.0 = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.ActiveCfg = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.Build.0 = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.ActiveCfg = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.Build.0 = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.ActiveCfg = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.Build.0 = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.ActiveCfg = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.Build.0 = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.ActiveCfg = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.Build.0 = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.ActiveCfg = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.Build.0 = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.Build.0 = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.ActiveCfg = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.Build.0 = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.ActiveCfg = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.Build.0 = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.ActiveCfg = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.Build.0 = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.ActiveCfg = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.Build.0 = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.ActiveCfg = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.Build.0 = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.ActiveCfg = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.Build.0 = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.ActiveCfg = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.Build.0 = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.ActiveCfg = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.Build.0 = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.ActiveCfg = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.Build.0 = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.ActiveCfg = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.Build.0 = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.ActiveCfg = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.Build.0 = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 2012
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb_static_2012.vcxproj", "{349EE8F9-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (dll)", "libusb_dll_2012.vcxproj", "{349EE8FA-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "listdevs", "listdevs_2012.vcxproj", "{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "xusb", "xusb_2012.vcxproj", "{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fxload", "fxload_2012.vcxproj", "{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}"
+ ProjectSection(ProjectDependencies) = postProject
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E} = {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "getopt", "getopt_2012.vcxproj", "{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "stress", "stress_2012.vcxproj", "{53942EFF-C810-458D-B3CB-EE5CE9F1E781}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "hotplugtest", "hotplugtest_2012.vcxproj", "{99D2AC64-DC66-4422-91CE-6715C403C9E5}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.Build.0 = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.Build.0 = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.ActiveCfg = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.Build.0 = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.ActiveCfg = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.Build.0 = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.ActiveCfg = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.Build.0 = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.ActiveCfg = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.Build.0 = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.ActiveCfg = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.Build.0 = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.ActiveCfg = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.Build.0 = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.ActiveCfg = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.Build.0 = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.ActiveCfg = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.Build.0 = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.ActiveCfg = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.Build.0 = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.ActiveCfg = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.Build.0 = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.ActiveCfg = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.Build.0 = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.ActiveCfg = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.Build.0 = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.Build.0 = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.ActiveCfg = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.Build.0 = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.ActiveCfg = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.Build.0 = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.ActiveCfg = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.Build.0 = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.ActiveCfg = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.Build.0 = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.ActiveCfg = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.Build.0 = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.ActiveCfg = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.Build.0 = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.ActiveCfg = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.Build.0 = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.ActiveCfg = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.Build.0 = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.ActiveCfg = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.Build.0 = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.ActiveCfg = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.Build.0 = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.ActiveCfg = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.Build.0 = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 2013
+VisualStudioVersion = 12.0.21005.1
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb_static_2013.vcxproj", "{349EE8F9-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (dll)", "libusb_dll_2013.vcxproj", "{349EE8FA-7D25-4909-AAF5-FF3FADE72187}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "listdevs", "listdevs_2013.vcxproj", "{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "xusb", "xusb_2013.vcxproj", "{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fxload", "fxload_2013.vcxproj", "{9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}"
+ ProjectSection(ProjectDependencies) = postProject
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E} = {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "getopt", "getopt_2013.vcxproj", "{AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "stress", "stress_2013.vcxproj", "{53942EFF-C810-458D-B3CB-EE5CE9F1E781}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "hotplugtest", "hotplugtest_2013.vcxproj", "{99D2AC64-DC66-4422-91CE-6715C403C9E5}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.Build.0 = Debug|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.Build.0 = Debug|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {349EE8F9-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.ActiveCfg = Debug|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|Win32.Build.0 = Debug|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.ActiveCfg = Debug|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Debug|x64.Build.0 = Debug|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.ActiveCfg = Release|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|Win32.Build.0 = Release|Win32
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|x64.ActiveCfg = Release|x64
+ {349EE8FA-7D25-4909-AAF5-FF3FADE72187}.Release|x64.Build.0 = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.ActiveCfg = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|Win32.Build.0 = Debug|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.ActiveCfg = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Debug|x64.Build.0 = Debug|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.ActiveCfg = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|Win32.Build.0 = Release|Win32
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.ActiveCfg = Release|x64
+ {F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}.Release|x64.Build.0 = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.ActiveCfg = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|Win32.Build.0 = Debug|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.ActiveCfg = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Debug|x64.Build.0 = Debug|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.ActiveCfg = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|Win32.Build.0 = Release|Win32
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.ActiveCfg = Release|x64
+ {3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}.Release|x64.Build.0 = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.ActiveCfg = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|Win32.Build.0 = Debug|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.ActiveCfg = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Debug|x64.Build.0 = Debug|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.ActiveCfg = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|Win32.Build.0 = Release|Win32
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.ActiveCfg = Release|x64
+ {9E166F7A-A793-9FB6-0A67-F0AED8AE8C88}.Release|x64.Build.0 = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|Win32.Build.0 = Debug|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.ActiveCfg = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Debug|x64.Build.0 = Debug|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.ActiveCfg = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|Win32.Build.0 = Release|Win32
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.ActiveCfg = Release|x64
+ {AE83E1B4-CE06-47EE-B7A3-C3A1D7C2D71E}.Release|x64.Build.0 = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.ActiveCfg = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|Win32.Build.0 = Debug|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.ActiveCfg = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Debug|x64.Build.0 = Debug|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.ActiveCfg = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|Win32.Build.0 = Release|Win32
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.ActiveCfg = Release|x64
+ {53942EFF-C810-458D-B3CB-EE5CE9F1E781}.Release|x64.Build.0 = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.ActiveCfg = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|Win32.Build.0 = Debug|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.ActiveCfg = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Debug|x64.Build.0 = Debug|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.ActiveCfg = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|Win32.Build.0 = Release|Win32
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.ActiveCfg = Release|x64
+ {99D2AC64-DC66-4422-91CE-6715C403C9E5}.Release|x64.Build.0 = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+# Microsoft Developer Studio Project File - Name="libusb_dll" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+
+CFG=libusb_dll - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "libusb_dll.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "libusb_dll.mak" CFG="libusb_dll - Win32 Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "libusb_dll - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "libusb_dll - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+MTL=midl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "libusb_dll - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "../Win32/Release/dll"
+# PROP Intermediate_Dir "../Win32/Release/dll"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_USRDLL" /D "LIBUSB_DLL_EXPORTS" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "." /I "../libusb" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /D "_USRDLL" /FR /FD /EHsc /c
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 /out:"Win32/Release/dll/libusb-1.0.dll"
+
+!ELSEIF "$(CFG)" == "libusb_dll - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "../Win32/Debug/dll"
+# PROP Intermediate_Dir "../Win32/Debug/dll"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_USRDLL" /D "LIBUSB_DLL_EXPORTS" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "." /I "../libusb" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /D "_USRDLL" /FR /FD /EHsc /c
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo /n
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /out:"Win32/Debug/dll/libusb-1.0.dll"
+# SUBTRACT LINK32 /pdb:none /incremental:no
+
+!ENDIF
+
+# Begin Target
+
+# Name "libusb_dll - Win32 Release"
+# Name "libusb_dll - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\libusb\core.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\darwin_usb.c
+# PROP Exclude_From_Build 1
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\descriptor.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\io.c
+# End Source File
+# Begin Source File
+
+SOURCE="..\libusb\libusb-1.0.rc"
+# End Source File
+# Begin Source File
+
+SOURCE="..\libusb\libusb-1.0.def"
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\linux_usbfs.c
+# PROP Exclude_From_Build 1
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_windows.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\sync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_windows.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_usb.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=.\config.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\darwin_usb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\libusb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\libusbi.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\linux_usbfs.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_posix.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_windows.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_posix.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_windows.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_usb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_common.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="libusb-1.0 (dll)"
+ ProjectGUID="{8224C054-5968-4238-832C-167155E7ECC3}"
+ RootNamespace="libusbdll"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\dll"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_WINDOWS;_USRDLL;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ LinkIncremental="2"
+ ModuleDefinitionFile="..\libusb\libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\dll"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_WINDOWS;_USRDLL;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ LinkIncremental="2"
+ ModuleDefinitionFile="..\libusb\libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="2"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\dll"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_WINDOWS;_USRDLL;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ LinkIncremental="1"
+ ModuleDefinitionFile="..\libusb\libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="2"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\dll"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_WINDOWS;_USRDLL;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ LinkIncremental="1"
+ ModuleDefinitionFile="..\libusb\libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="2"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\libusb\core.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\descriptor.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\io.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\strerror.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\sync.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_usb.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath=".\config.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusbi.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_usb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_common.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ <File
+ RelativePath="..\libusb\libusb-1.0.def"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb-1.0.rc"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (dll)</ProjectName>
+ <ProjectGuid>{349EE8FA-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusbdll</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ <ClInclude Include="..\libusb\os\windows_common.h" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="..\libusb\libusb-1.0.def" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="..\libusb\libusb-1.0.rc" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{d81e81ca-b13e-4a15-b54b-b12b41361e6b}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\descriptor.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\hotplug.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\io.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\poll_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\strerror.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\sync.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\threads_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\windows_usb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\hotplug.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusbi.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\poll_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\threads_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_usb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_common.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="..\libusb\libusb-1.0.def">
+ <Filter>Resource Files</Filter>
+ </None>
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="..\libusb\libusb-1.0.rc">
+ <Filter>Resource Files</Filter>
+ </ResourceCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (dll)</ProjectName>
+ <ProjectGuid>{349EE8FA-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusbdll</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\version.h" />
+ <ClInclude Include="..\libusb\version_nano.h" />
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="..\libusb\libusb-1.0.def" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="..\libusb\libusb-1.0.rc" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{d81e81ca-b13e-4a15-b54b-b12b41361e6b}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\descriptor.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\io.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\poll_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\strerror.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\sync.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\threads_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\windows_usb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\hotplug.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusbi.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\poll_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\threads_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_usb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version_nano.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\hotplug.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="..\libusb\libusb-1.0.def">
+ <Filter>Resource Files</Filter>
+ </None>
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="..\libusb\libusb-1.0.rc">
+ <Filter>Resource Files</Filter>
+ </ResourceCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (dll)</ProjectName>
+ <ProjectGuid>{349EE8FA-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusbdll</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\dll\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)libusb-1.0.dll</OutputFile>
+ <ModuleDefinitionFile>..\libusb\libusb-1.0.def</ModuleDefinitionFile>
+ <EmbedManagedResourceFile>libusb-1.0.rc;%(EmbedManagedResourceFile)</EmbedManagedResourceFile>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\version.h" />
+ <ClInclude Include="..\libusb\version_nano.h" />
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="..\libusb\libusb-1.0.def" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="..\libusb\libusb-1.0.rc" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="libusb-1.0 (dll)"
+ ProjectGUID="{6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}"
+ RootNamespace="libusb"
+ >
+ <Platforms>
+ <Platform
+ Name="STANDARDSDK_500 (ARMV4I)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (SH4)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (x86)"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ ForcedIncludeFiles=""
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory="%CSIDL_PROGRAM_FILES%\lsusb"
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\dll"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\dll\libusb-1.0"
+ ConfigurationType="2"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\libusb-1.0.dll"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ ModuleDefinitionFile="../libusb/libusb-1.0.def"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\libusb\core.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\descriptor.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\io.c"
+ >
+ </File>
+ <File
+ RelativePath="missing.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\strerror.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\sync.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\wince_usb.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath="config.h"
+ >
+ </File>
+ <File
+ RelativePath="errno.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusbi.h"
+ >
+ </File>
+ <File
+ RelativePath="missing.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\version.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\wince_usb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_common.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ <File
+ RelativePath="..\libusb\libusb-1.0.def"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb-1.0.rc"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+#TARGETTYPE is not defined, to allow selection between static lib or DLL with ddk_build
+TARGETNAME=libusb-1.0
+DLLDEF=..\libusb-1.0.def
+
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+!IFDEF STATIC_LIBC
+USE_LIBCMT=1
+!ELSE
+USE_MSVCRT=1
+!ENDIF
+
+INCLUDES=..;..\..\msvc;$(DDK_INC_PATH)
+C_DEFINES= $(C_DEFINES) $(LIBUSB_DEFINES) /DDDKBUILD
+
+# http://jpassing.com/2009/10/21/ltcg-issues-with-the-win7amd64-environment-of-wdk-7600/
+# prevents the following error when using the 64 bit static lib with Visual Studio 2010:
+# "fatal error C1001: An internal error has occurred in the compiler.
+# (compiler file 'f:\dd\vctools\compiler\utc\src\p2\p2symtab.c', line 1823)"
+# and the following with Visual Studio 2010:
+# "fatal error C1047: The object or library file 'libusb-1.0.lib' was created with
+# an older compiler than other objects; rebuild old objects and libraries"
+USER_C_FLAGS=/GL-
+
+TARGETLIBS=$(SDK_LIB_PATH)\kernel32.lib
+
+SOURCES=..\core.c \
+ ..\descriptor.c \
+ ..\io.c \
+ ..\strerror.c \
+ ..\sync.c \
+ ..\hotplug.c \
+ threads_windows.c \
+ poll_windows.c \
+ windows_usb.c \
+ ..\libusb-1.0.rc
--- /dev/null
+# Microsoft Developer Studio Project File - Name="libusb_static" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=libusb_static - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "libusb_static.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "libusb_static.mak" CFG="libusb_static - Win32 Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "libusb_static - Win32 Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "libusb_static - Win32 Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "libusb_static - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "../Win32/Release/lib"
+# PROP Intermediate_Dir "../Win32/Release/lib"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_LIB" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "." /I "../libusb" /D "WIN32" /D "NDEBUG" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /D "_LIB" /FR /FD /EHsc /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"../Win32/Release/lib/libusb-1.0.lib"
+
+!ELSEIF "$(CFG)" == "libusb_static - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "../Win32/Debug/lib"
+# PROP Intermediate_Dir "../Win32/Debug/lib"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_LIB" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "." /I "../libusb" /D "WIN32" /D "_DEBUG" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /D "_LIB" /FR /FD /GZ /EHsc /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo /n
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"../Win32/Debug/lib/libusb-1.0.lib"
+
+!ENDIF
+
+# Begin Target
+
+# Name "libusb_static - Win32 Release"
+# Name "libusb_static - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\libusb\core.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\darwin_usb.c
+# PROP Exclude_From_Build 1
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\descriptor.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\io.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\linux_usbfs.c
+# PROP Exclude_From_Build 1
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_windows.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\sync.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_windows.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_usb.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=.\config.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\darwin_usb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\libusb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\libusbi.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\linux_usbfs.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_posix.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\poll_windows.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_posix.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\threads_windows.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_usb.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\libusb\os\windows_common.h
+# End Source File
+# End Group
+# End Target
+# End Project
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="libusb-1.0 (static)"
+ ProjectGUID="{5AB6B770-1925-48D5-ABC2-930F3259C020}"
+ RootNamespace="libusb"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\lib"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\libusb\core.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\descriptor.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\io.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\strerror.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\sync.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_usb.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath=".\config.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusbi.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_usb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_common.h"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (static)</ProjectName>
+ <ProjectGuid>{349EE8F9-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusb</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\version.h" />
+ <ClInclude Include="..\libusb\version_nano.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ <ClInclude Include="..\libusb\os\windows_common.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\descriptor.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\io.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\poll_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\strerror.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\sync.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\threads_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\windows_usb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\hotplug.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusbi.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\poll_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\threads_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_usb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_common.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version_nano.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\hotplug.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (static)</ProjectName>
+ <ProjectGuid>{349EE8F9-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusb</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\version.h" />
+ <ClInclude Include="..\libusb\version_nano.h" />
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ <ClInclude Include="..\libusb\os\windows_common.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\descriptor.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\io.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\poll_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\strerror.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\sync.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\threads_windows.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\os\windows_usb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\libusb\hotplug.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include=".\config.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\libusbi.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\poll_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\threads_windows.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_usb.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\os\windows_common.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version_nano.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\version.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\libusb\hotplug.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>libusb-1.0 (static)</ProjectName>
+ <ProjectGuid>{349EE8F9-7D25-4909-AAF5-FF3FADE72187}</ProjectGuid>
+ <RootNamespace>libusb</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\lib\libusb-1.0\</IntDir>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">libusb-1.0</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">libusb-1.0</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_DEBUG;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_WIN32;_WIN64;_LIB;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level4</WarningLevel>
+ </ClCompile>
+ <Lib>
+ <OutputFile>$(OutDir)libusb-1.0.lib</OutputFile>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\libusb\core.c" />
+ <ClCompile Include="..\libusb\descriptor.c" />
+ <ClCompile Include="..\libusb\hotplug.c" />
+ <ClCompile Include="..\libusb\io.c" />
+ <ClCompile Include="..\libusb\os\poll_windows.c" />
+ <ClCompile Include="..\libusb\strerror.c" />
+ <ClCompile Include="..\libusb\sync.c" />
+ <ClCompile Include="..\libusb\os\threads_windows.c" />
+ <ClCompile Include="..\libusb\os\windows_usb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\libusb\hotplug.h" />
+ <ClInclude Include="..\libusb\version.h" />
+ <ClInclude Include="..\libusb\version_nano.h" />
+ <ClInclude Include=".\config.h" />
+ <ClInclude Include="..\libusb\libusb.h" />
+ <ClInclude Include="..\libusb\libusbi.h" />
+ <ClInclude Include="..\libusb\os\poll_windows.h" />
+ <ClInclude Include="..\libusb\os\threads_windows.h" />
+ <ClInclude Include="..\libusb\os\windows_usb.h" />
+ <ClInclude Include="..\libusb\os\windows_common.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="libusb-1.0 (static)"
+ ProjectGUID="{CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}"
+ RootNamespace="libusb"
+ >
+ <Platforms>
+ <Platform
+ Name="STANDARDSDK_500 (ARMV4I)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (SH4)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (x86)"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ ForcedIncludeFiles=""
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory="%CSIDL_PROGRAM_FILES%\lsusb"
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\lib"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\lib\libusb-1.0"
+ ConfigurationType="4"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_USRDLL;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="WINCE;_WIN32_WCE"
+ AdditionalIncludeDirectories="."
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ OutputFile="$(OutDir)\libusb-1.0.lib"
+ AdditionalOptions="/subsystem:$(CESubsystem)"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\libusb\core.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\descriptor.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\hotplug.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\io.c"
+ >
+ </File>
+ <File
+ RelativePath="missing.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\strerror.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\sync.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.c"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\wince_usb.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath="config.h"
+ >
+ </File>
+ <File
+ RelativePath="errno.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusbi.h"
+ >
+ </File>
+ <File
+ RelativePath="missing.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\poll_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\threads_windows.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\version.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\wince_usb.h"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\os\windows_common.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ <File
+ RelativePath="..\libusb\libusb-1.0.def"
+ >
+ </File>
+ <File
+ RelativePath="..\libusb\libusb-1.0.rc"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (dll)", "libusb_dll_wince.vcproj", "{6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "listdevs", "listdevs_wince.vcproj", "{960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "xusb", "xusb_wince.vcproj", "{93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "libusb-1.0 (static)", "libusb_static_wince.vcproj", "{CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "stress", "stress_wince.vcproj", "{61476624-3354-48C8-9334-85AC0D624640}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|STANDARDSDK_500 (ARMV4I) = Debug|STANDARDSDK_500 (ARMV4I)
+ Debug|STANDARDSDK_500 (MIPSII) = Debug|STANDARDSDK_500 (MIPSII)
+ Debug|STANDARDSDK_500 (MIPSII_FP) = Debug|STANDARDSDK_500 (MIPSII_FP)
+ Debug|STANDARDSDK_500 (MIPSIV) = Debug|STANDARDSDK_500 (MIPSIV)
+ Debug|STANDARDSDK_500 (MIPSIV_FP) = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ Debug|STANDARDSDK_500 (SH4) = Debug|STANDARDSDK_500 (SH4)
+ Debug|STANDARDSDK_500 (x86) = Debug|STANDARDSDK_500 (x86)
+ Release|STANDARDSDK_500 (ARMV4I) = Release|STANDARDSDK_500 (ARMV4I)
+ Release|STANDARDSDK_500 (MIPSII) = Release|STANDARDSDK_500 (MIPSII)
+ Release|STANDARDSDK_500 (MIPSII_FP) = Release|STANDARDSDK_500 (MIPSII_FP)
+ Release|STANDARDSDK_500 (MIPSIV) = Release|STANDARDSDK_500 (MIPSIV)
+ Release|STANDARDSDK_500 (MIPSIV_FP) = Release|STANDARDSDK_500 (MIPSIV_FP)
+ Release|STANDARDSDK_500 (SH4) = Release|STANDARDSDK_500 (SH4)
+ Release|STANDARDSDK_500 (x86) = Release|STANDARDSDK_500 (x86)
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (ARMV4I).ActiveCfg = Debug|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (ARMV4I).Build.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (ARMV4I).Deploy.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII).Build.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV).Build.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (SH4).ActiveCfg = Debug|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (SH4).Build.0 = Debug|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (SH4).Deploy.0 = Debug|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (x86).ActiveCfg = Debug|STANDARDSDK_500 (x86)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (x86).Build.0 = Debug|STANDARDSDK_500 (x86)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Debug|STANDARDSDK_500 (x86).Deploy.0 = Debug|STANDARDSDK_500 (x86)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (ARMV4I).ActiveCfg = Release|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (ARMV4I).Build.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (ARMV4I).Deploy.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII).ActiveCfg = Release|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII).Build.0 = Release|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII).Deploy.0 = Release|STANDARDSDK_500 (MIPSII)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII_FP).Build.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV).Build.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (SH4).ActiveCfg = Release|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (SH4).Build.0 = Release|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (SH4).Deploy.0 = Release|STANDARDSDK_500 (SH4)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (x86).ActiveCfg = Release|STANDARDSDK_500 (x86)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (x86).Build.0 = Release|STANDARDSDK_500 (x86)
+ {6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}.Release|STANDARDSDK_500 (x86).Deploy.0 = Release|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (ARMV4I).ActiveCfg = Debug|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (ARMV4I).Build.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (ARMV4I).Deploy.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII).Build.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV).Build.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (SH4).ActiveCfg = Debug|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (SH4).Build.0 = Debug|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (SH4).Deploy.0 = Debug|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (x86).ActiveCfg = Debug|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (x86).Build.0 = Debug|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Debug|STANDARDSDK_500 (x86).Deploy.0 = Debug|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (ARMV4I).ActiveCfg = Release|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (ARMV4I).Build.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (ARMV4I).Deploy.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII).ActiveCfg = Release|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII).Build.0 = Release|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII).Deploy.0 = Release|STANDARDSDK_500 (MIPSII)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII_FP).Build.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV).Build.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (SH4).ActiveCfg = Release|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (SH4).Build.0 = Release|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (SH4).Deploy.0 = Release|STANDARDSDK_500 (SH4)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (x86).ActiveCfg = Release|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (x86).Build.0 = Release|STANDARDSDK_500 (x86)
+ {960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}.Release|STANDARDSDK_500 (x86).Deploy.0 = Release|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (ARMV4I).ActiveCfg = Debug|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (ARMV4I).Build.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (ARMV4I).Deploy.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII).Build.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV).Build.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (SH4).ActiveCfg = Debug|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (SH4).Build.0 = Debug|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (SH4).Deploy.0 = Debug|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (x86).ActiveCfg = Debug|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (x86).Build.0 = Debug|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Debug|STANDARDSDK_500 (x86).Deploy.0 = Debug|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (ARMV4I).ActiveCfg = Release|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (ARMV4I).Build.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (ARMV4I).Deploy.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII).ActiveCfg = Release|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII).Build.0 = Release|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII).Deploy.0 = Release|STANDARDSDK_500 (MIPSII)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII_FP).Build.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV).Build.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (SH4).ActiveCfg = Release|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (SH4).Build.0 = Release|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (SH4).Deploy.0 = Release|STANDARDSDK_500 (SH4)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (x86).ActiveCfg = Release|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (x86).Build.0 = Release|STANDARDSDK_500 (x86)
+ {93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}.Release|STANDARDSDK_500 (x86).Deploy.0 = Release|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (ARMV4I).ActiveCfg = Debug|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (ARMV4I).Build.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (ARMV4I).Deploy.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII).Build.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV).Build.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (SH4).ActiveCfg = Debug|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (SH4).Build.0 = Debug|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (SH4).Deploy.0 = Debug|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (x86).ActiveCfg = Debug|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (x86).Build.0 = Debug|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Debug|STANDARDSDK_500 (x86).Deploy.0 = Debug|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (ARMV4I).ActiveCfg = Release|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (ARMV4I).Build.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (ARMV4I).Deploy.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII).ActiveCfg = Release|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII).Build.0 = Release|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII).Deploy.0 = Release|STANDARDSDK_500 (MIPSII)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII_FP).Build.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV).Build.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (SH4).ActiveCfg = Release|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (SH4).Build.0 = Release|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (SH4).Deploy.0 = Release|STANDARDSDK_500 (SH4)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (x86).ActiveCfg = Release|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (x86).Build.0 = Release|STANDARDSDK_500 (x86)
+ {CE67BEFB-37EA-4F5C-A60E-F2D0CC91B6AA}.Release|STANDARDSDK_500 (x86).Deploy.0 = Release|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (ARMV4I).ActiveCfg = Debug|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (ARMV4I).Build.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (ARMV4I).Deploy.0 = Debug|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII).Build.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV).Build.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Debug|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (SH4).ActiveCfg = Debug|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (SH4).Build.0 = Debug|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (SH4).Deploy.0 = Debug|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (x86).ActiveCfg = Debug|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (x86).Build.0 = Debug|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Debug|STANDARDSDK_500 (x86).Deploy.0 = Debug|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (ARMV4I).ActiveCfg = Release|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (ARMV4I).Build.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (ARMV4I).Deploy.0 = Release|STANDARDSDK_500 (ARMV4I)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII).ActiveCfg = Release|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII).Build.0 = Release|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII).Deploy.0 = Release|STANDARDSDK_500 (MIPSII)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII_FP).Build.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSII_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSII_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV).Build.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV_FP).ActiveCfg = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV_FP).Build.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (MIPSIV_FP).Deploy.0 = Release|STANDARDSDK_500 (MIPSIV_FP)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (SH4).ActiveCfg = Release|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (SH4).Build.0 = Release|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (SH4).Deploy.0 = Release|STANDARDSDK_500 (SH4)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (x86).ActiveCfg = Release|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (x86).Build.0 = Release|STANDARDSDK_500 (x86)
+ {61476624-3354-48C8-9334-85AC0D624640}.Release|STANDARDSDK_500 (x86).Deploy.0 = Release|STANDARDSDK_500 (x86)
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+# Microsoft Developer Studio Project File - Name="listdevs" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=listdevs - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "listdevs.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "listdevs.mak" CFG="listdevs - Win32 Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "listdevs - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "listdevs - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "listdevs - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "../Win32/Release/examples"
+# PROP Intermediate_Dir "../Win32/Release/examples/listdevs"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "../libusb" /I "." /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /FR /FD /EHsc /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "listdevs - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "../Win32/Debug/examples"
+# PROP Intermediate_Dir "../Win32/Debug/examples/listdevs"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "../libusb" /I "." /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /FR /FD /GZ /EHsc /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo /n "../Win32/Debug/dll/core.sbr" "../Win32/Debug/dll/descriptor.sbr" "../Win32/Debug/dll/io.sbr" "../Win32/Debug/dll/sync.sbr" "../Win32/Debug/dll/poll_windows.sbr" "../Win32/Debug/dll/threads_windows.sbr" "../Win32/Debug/dll/windows_usb.sbr"
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF
+
+# Begin Target
+
+# Name "listdevs - Win32 Release"
+# Name "listdevs - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\examples\listdevs.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="listdevs"
+ ProjectGUID="{98CFD8FA-EE20-40D5-AF13-F8C4856D6CA5}"
+ RootNamespace="examples"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\examples\listdevs.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>listdevs</ProjectName>
+ <ProjectGuid>{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\listdevs.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\listdevs.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>listdevs</ProjectName>
+ <ProjectGuid>{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\listdevs.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2012.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\listdevs.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>listdevs</ProjectName>
+ <ProjectGuid>{F4938DB0-3DE7-4737-9C5A-EAD1BE819F87}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <ProgramDatabaseFile>$(TargetDir)$(ProjectName).pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\listdevs.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2013.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+TARGETNAME=listdevs
+TARGETTYPE=PROGRAM
+386_STDCALL=0
+
+_NT_TARGET_VERSION= $(_NT_TARGET_VERSION_WINXP)
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+!IFDEF STATIC_LIBC
+USE_LIBCMT=1
+!ELSE
+USE_MSVCRT=1
+!ENDIF
+
+UMTYPE=console
+INCLUDES=..\..\libusb;$(DDK_INC_PATH)
+UMLIBS=..\..\libusb\os\obj$(BUILD_ALT_DIR)\*\libusb-1.0.lib
+SOURCES=..\listdevs.c
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="listdevs"
+ ProjectGUID="{960C3BC3-26D6-49C7-ACE4-0AE65CC049E6}"
+ RootNamespace="listdevs"
+ >
+ <Platforms>
+ <Platform
+ Name="STANDARDSDK_500 (ARMV4I)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (SH4)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (x86)"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory="%CSIDL_PROGRAM_FILES%\listdevs"
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ <ProjectReference
+ ReferencedProjectIdentifier="{6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}"
+ RelativePathToProject=".\libusb-1.0.vcproj"
+ />
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\examples\listdevs.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+/*
+ * Source file for missing WinCE functionality
+ * Copyright © 2012 RealVNC Ltd.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "missing.h"
+
+#include <config.h>
+#include <libusbi.h>
+
+#include <windows.h>
+
+// The registry path to store environment variables
+#define ENVIRONMENT_REG_PATH _T("Software\\libusb\\environment")
+
+/* Workaround getenv not being available on WinCE.
+ * Instead look in HKLM\Software\libusb\environment */
+char *getenv(const char *name)
+{
+ static char value[MAX_PATH];
+ TCHAR wValue[MAX_PATH];
+ WCHAR wName[MAX_PATH];
+ DWORD dwType, dwData;
+ HKEY hkey;
+ LONG rc;
+
+ if (!name)
+ return NULL;
+
+ if (MultiByteToWideChar(CP_UTF8, 0, name, -1, wName, MAX_PATH) <= 0) {
+ usbi_dbg("Failed to convert environment variable name to wide string");
+ return NULL;
+ }
+ wName[MAX_PATH - 1] = 0; // Be sure it's NUL terminated
+
+ rc = RegOpenKeyEx(HKEY_LOCAL_MACHINE, ENVIRONMENT_REG_PATH, 0, KEY_QUERY_VALUE, &hkey);
+ if (rc != ERROR_SUCCESS) {
+ usbi_dbg("Failed to open registry key for getenv with error %d", rc);
+ return NULL;
+ }
+
+ // Attempt to read the key
+ dwData = sizeof(wValue);
+ rc = RegQueryValueEx(hkey, wName, NULL, &dwType,
+ (LPBYTE)&wValue, &dwData);
+ RegCloseKey(hkey);
+ if (rc != ERROR_SUCCESS) {
+ usbi_dbg("Failed to read registry key value for getenv with error %d", rc);
+ return NULL;
+ }
+ if (dwType != REG_SZ) {
+ usbi_dbg("Registry value was of type %d instead of REG_SZ", dwType);
+ return NULL;
+ }
+
+ // Success in reading the key, convert from WCHAR to char
+ if (WideCharToMultiByte(CP_UTF8, 0,
+ wValue, dwData / sizeof(*wValue),
+ value, MAX_PATH,
+ NULL, NULL) <= 0) {
+ usbi_dbg("Failed to convert environment variable value to narrow string");
+ return NULL;
+ }
+ value[MAX_PATH - 1] = 0; // Be sure it's NUL terminated
+ return value;
+}
--- /dev/null
+/*
+ * Header file for missing WinCE functionality
+ * Copyright © 2012-2013 RealVNC Ltd.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef MISSING_H
+#define MISSING_H
+
+/* Windows CE doesn't have SleepEx() - Fallback to Sleep() */
+#define SleepEx(m, a) Sleep(m)
+
+/* Windows CE doesn't have any APIs to query environment variables.
+ *
+ * This contains a registry based implementation of getenv.
+ */
+char *getenv(const char *name);
+
+#endif
--- /dev/null
+/**
+ * This file has no copyright assigned and is placed in the Public Domain.
+ * This file was originally part of the w64 mingw-runtime package.
+ */
+
+/* ISO C9x 7.18 Integer types <stdint.h>
+ * Based on ISO/IEC SC22/WG14 9899 Committee draft (SC22 N2794)
+ *
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * Contributor: Danny Smith <danny_r_smith_2001@yahoo.co.nz>
+ * Modified for libusb/MSVC: Pete Batard <pbatard@gmail.com>
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ *
+ * This code is distributed in the hope that it will be useful but
+ * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
+ * DISCLAIMED. This includes but is not limited to warranties of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Date: 2010-04-02
+ */
+
+#ifndef _MSC_VER
+#error This header should only be used with Microsoft compilers
+#endif
+
+#ifndef _STDINT_H
+#define _STDINT_H
+
+#ifndef _INTPTR_T_DEFINED
+#define _INTPTR_T_DEFINED
+#ifndef __intptr_t_defined
+#define __intptr_t_defined
+#undef intptr_t
+#ifdef _WIN64
+ typedef __int64 intptr_t;
+#else
+ typedef int intptr_t;
+#endif /* _WIN64 */
+#endif /* __intptr_t_defined */
+#endif /* _INTPTR_T_DEFINED */
+
+#ifndef _UINTPTR_T_DEFINED
+#define _UINTPTR_T_DEFINED
+#ifndef __uintptr_t_defined
+#define __uintptr_t_defined
+#undef uintptr_t
+#ifdef _WIN64
+ typedef unsigned __int64 uintptr_t;
+#else
+ typedef unsigned int uintptr_t;
+#endif /* _WIN64 */
+#endif /* __uintptr_t_defined */
+#endif /* _UINTPTR_T_DEFINED */
+
+#ifndef _PTRDIFF_T_DEFINED
+#define _PTRDIFF_T_DEFINED
+#ifndef _PTRDIFF_T_
+#define _PTRDIFF_T_
+#undef ptrdiff_t
+#ifdef _WIN64
+ typedef __int64 ptrdiff_t;
+#else
+ typedef int ptrdiff_t;
+#endif /* _WIN64 */
+#endif /* _PTRDIFF_T_ */
+#endif /* _PTRDIFF_T_DEFINED */
+
+#ifndef _WCHAR_T_DEFINED
+#define _WCHAR_T_DEFINED
+#ifndef __cplusplus
+ typedef unsigned short wchar_t;
+#endif /* C++ */
+#endif /* _WCHAR_T_DEFINED */
+
+#ifndef _WCTYPE_T_DEFINED
+#define _WCTYPE_T_DEFINED
+#ifndef _WINT_T
+#define _WINT_T
+ typedef unsigned short wint_t;
+ typedef unsigned short wctype_t;
+#endif /* _WINT_T */
+#endif /* _WCTYPE_T_DEFINED */
+
+/* 7.18.1.1 Exact-width integer types */
+typedef __int8 int8_t;
+typedef unsigned __int8 uint8_t;
+typedef __int16 int16_t;
+typedef unsigned __int16 uint16_t;
+typedef __int32 int32_t;
+typedef unsigned __int32 uint32_t;
+typedef __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+
+/* 7.18.1.2 Minimum-width integer types */
+typedef signed char int_least8_t;
+typedef unsigned char uint_least8_t;
+typedef short int_least16_t;
+typedef unsigned short uint_least16_t;
+typedef int int_least32_t;
+typedef unsigned uint_least32_t;
+typedef __int64 int_least64_t;
+typedef unsigned __int64 uint_least64_t;
+
+/* 7.18.1.3 Fastest minimum-width integer types
+ * Not actually guaranteed to be fastest for all purposes
+ * Here we use the exact-width types for 8 and 16-bit ints.
+ */
+typedef __int8 int_fast8_t;
+typedef unsigned __int8 uint_fast8_t;
+typedef __int16 int_fast16_t;
+typedef unsigned __int16 uint_fast16_t;
+typedef __int32 int_fast32_t;
+typedef unsigned __int32 uint_fast32_t;
+typedef __int64 int_fast64_t;
+typedef unsigned __int64 uint_fast64_t;
+
+/* 7.18.1.5 Greatest-width integer types */
+typedef __int64 intmax_t;
+typedef unsigned __int64 uintmax_t;
+
+/* 7.18.2 Limits of specified-width integer types */
+
+/* 7.18.2.1 Limits of exact-width integer types */
+#define INT8_MIN (-128)
+#define INT16_MIN (-32768)
+#define INT32_MIN (-2147483647 - 1)
+#define INT64_MIN (-9223372036854775807LL - 1)
+
+#define INT8_MAX 127
+#define INT16_MAX 32767
+#define INT32_MAX 2147483647
+#define INT64_MAX 9223372036854775807LL
+
+#define UINT8_MAX 255
+#define UINT16_MAX 65535
+#define UINT32_MAX 0xffffffffU /* 4294967295U */
+#define UINT64_MAX 0xffffffffffffffffULL /* 18446744073709551615ULL */
+
+/* 7.18.2.2 Limits of minimum-width integer types */
+#define INT_LEAST8_MIN INT8_MIN
+#define INT_LEAST16_MIN INT16_MIN
+#define INT_LEAST32_MIN INT32_MIN
+#define INT_LEAST64_MIN INT64_MIN
+
+#define INT_LEAST8_MAX INT8_MAX
+#define INT_LEAST16_MAX INT16_MAX
+#define INT_LEAST32_MAX INT32_MAX
+#define INT_LEAST64_MAX INT64_MAX
+
+#define UINT_LEAST8_MAX UINT8_MAX
+#define UINT_LEAST16_MAX UINT16_MAX
+#define UINT_LEAST32_MAX UINT32_MAX
+#define UINT_LEAST64_MAX UINT64_MAX
+
+/* 7.18.2.3 Limits of fastest minimum-width integer types */
+#define INT_FAST8_MIN INT8_MIN
+#define INT_FAST16_MIN INT16_MIN
+#define INT_FAST32_MIN INT32_MIN
+#define INT_FAST64_MIN INT64_MIN
+
+#define INT_FAST8_MAX INT8_MAX
+#define INT_FAST16_MAX INT16_MAX
+#define INT_FAST32_MAX INT32_MAX
+#define INT_FAST64_MAX INT64_MAX
+
+#define UINT_FAST8_MAX UINT8_MAX
+#define UINT_FAST16_MAX UINT16_MAX
+#define UINT_FAST32_MAX UINT32_MAX
+#define UINT_FAST64_MAX UINT64_MAX
+
+/* 7.18.2.4 Limits of integer types capable of holding
+ object pointers */
+#ifdef _WIN64
+#define INTPTR_MIN INT64_MIN
+#define INTPTR_MAX INT64_MAX
+#define UINTPTR_MAX UINT64_MAX
+#else
+#define INTPTR_MIN INT32_MIN
+#define INTPTR_MAX INT32_MAX
+#define UINTPTR_MAX UINT32_MAX
+#endif
+
+/* 7.18.2.5 Limits of greatest-width integer types */
+#define INTMAX_MIN INT64_MIN
+#define INTMAX_MAX INT64_MAX
+#define UINTMAX_MAX UINT64_MAX
+
+/* 7.18.3 Limits of other integer types */
+#ifdef _WIN64
+#define PTRDIFF_MIN INT64_MIN
+#define PTRDIFF_MAX INT64_MAX
+#else
+#define PTRDIFF_MIN INT32_MIN
+#define PTRDIFF_MAX INT32_MAX
+#endif
+
+#define SIG_ATOMIC_MIN INT32_MIN
+#define SIG_ATOMIC_MAX INT32_MAX
+
+#ifndef SIZE_MAX
+#ifdef _WIN64
+#define SIZE_MAX UINT64_MAX
+#else
+#define SIZE_MAX UINT32_MAX
+#endif
+#endif
+
+#ifndef WCHAR_MIN /* also in wchar.h */
+#define WCHAR_MIN 0U
+#define WCHAR_MAX 0xffffU
+#endif
+
+/*
+ * wint_t is unsigned short for compatibility with MS runtime
+ */
+#define WINT_MIN 0U
+#define WINT_MAX 0xffffU
+
+
+/* 7.18.4 Macros for integer constants */
+
+/* 7.18.4.1 Macros for minimum-width integer constants
+
+ Accoding to Douglas Gwyn <gwyn@arl.mil>:
+ "This spec was changed in ISO/IEC 9899:1999 TC1; in ISO/IEC
+ 9899:1999 as initially published, the expansion was required
+ to be an integer constant of precisely matching type, which
+ is impossible to accomplish for the shorter types on most
+ platforms, because C99 provides no standard way to designate
+ an integer constant with width less than that of type int.
+ TC1 changed this to require just an integer constant
+ *expression* with *promoted* type."
+
+ The trick used here is from Clive D W Feather.
+*/
+
+#define INT8_C(val) (INT_LEAST8_MAX-INT_LEAST8_MAX+(val))
+#define INT16_C(val) (INT_LEAST16_MAX-INT_LEAST16_MAX+(val))
+#define INT32_C(val) (INT_LEAST32_MAX-INT_LEAST32_MAX+(val))
+/* The 'trick' doesn't work in C89 for long long because, without
+ suffix, (val) will be evaluated as int, not intmax_t */
+#define INT64_C(val) val##i64
+
+#define UINT8_C(val) (val)
+#define UINT16_C(val) (val)
+#define UINT32_C(val) (val##i32)
+#define UINT64_C(val) val##ui64
+
+/* 7.18.4.2 Macros for greatest-width integer constants */
+#define INTMAX_C(val) val##i64
+#define UINTMAX_C(val) val##ui64
+
+#endif
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="stress"
+ ProjectGUID="{53942EFF-C810-458D-B3CB-EE5CE9F1E781}"
+ RootNamespace="tests"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\tests"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\tests\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\tests"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\tests\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\tests"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\tests\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\tests"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\tests\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\tests\testlib.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\tests\stress.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ Detect64BitPortabilityProblems="false"
+ />
+ </FileConfiguration>
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath="..\tests\libusb_testlib.h"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>stress</ProjectName>
+ <ProjectGuid>{53942EFF-C810-458D-B3CB-EE5CE9F1E781}</ProjectGuid>
+ <RootNamespace>tests</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\tests\stress.c" />
+ <ClCompile Include="..\tests\testlib.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\tests\libusb_testlib.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{28b6220e-d087-4f48-bd69-ffe0ac5bcc7a}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\tests\stress.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\tests\testlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\tests\libusb_testlib.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>stress</ProjectName>
+ <ProjectGuid>{53942EFF-C810-458D-B3CB-EE5CE9F1E781}</ProjectGuid>
+ <RootNamespace>tests</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\tests\stress.c" />
+ <ClCompile Include="..\tests\testlib.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2012.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\tests\libusb_testlib.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{28b6220e-d087-4f48-bd69-ffe0ac5bcc7a}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\tests\stress.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\tests\testlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\tests\libusb_testlib.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>stress</ProjectName>
+ <ProjectGuid>{53942EFF-C810-458D-B3CB-EE5CE9F1E781}</ProjectGuid>
+ <RootNamespace>tests</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\tests\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\tests\stress.c" />
+ <ClCompile Include="..\tests\testlib.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2013.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\tests\libusb_testlib.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="stress"
+ ProjectGUID="{61476624-3354-48C8-9334-85AC0D624640}"
+ RootNamespace="stress"
+ >
+ <Platforms>
+ <Platform
+ Name="STANDARDSDK_500 (ARMV4I)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (SH4)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (x86)"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory="%CSIDL_PROGRAM_FILES%\stress"
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\tests"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\tests\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ <ProjectReference
+ ReferencedProjectIdentifier="{6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}"
+ RelativePathToProject=".\libusb_dll.vcproj"
+ />
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\tests\stress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\tests\testlib.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ <File
+ RelativePath="..\tests\libusb_testlib.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+# Microsoft Developer Studio Project File - Name="xusb" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=xusb - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "xusb.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "xusb.mak" CFG="xusb - Win32 Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "xusb - Win32 Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "xusb - Win32 Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "xusb - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "../Win32/Release/examples"
+# PROP Intermediate_Dir "../Win32/Release/examples/xusb"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD CPP /nologo /MD /W3 /GX /O2 /I "." /I "../libusb" /I "." /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /FR /FD /EHsc /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "xusb - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "xusb___Win32_Debug"
+# PROP BASE Intermediate_Dir "xusb___Win32_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "../Win32/Debug/examples"
+# PROP Intermediate_Dir "../Win32/Debug/examples/xusb"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /YX /FD /GZ /c
+# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "." /I "../libusb" /I "." /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_UNICODE" /D "UNICODE" /U "_MBCS" /FR /FD /GZ /EHsc /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo /n "../Win32/Debug/dll/core.sbr" "../Win32/Debug/dll/descriptor.sbr" "../Win32/Debug/dll/io.sbr" "../Win32/Debug/dll/sync.sbr" "../Win32/Debug/dll/poll_windows.sbr" "../Win32/Debug/dll/threads_windows.sbr" "../Win32/Debug/dll/windows_usb.sbr"
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib shell32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386
+
+!ENDIF
+
+# Begin Target
+
+# Name "xusb - Win32 Release"
+# Name "xusb - Win32 Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\examples\xusb.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="xusb"
+ ProjectGUID="{08A6FA39-21B7-4A05-9252-2F9864A5E5A4}"
+ RootNamespace="examples"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="3"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="2"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="..\$(PlatformName)\$(ConfigurationName)\examples"
+ IntermediateDirectory="..\$(PlatformName)\$(ConfigurationName)\examples\$(ProjectName)"
+ ConfigurationType="1"
+ CharacterSet="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=".;..\libusb"
+ PreprocessorDefinitions="WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS"
+ RuntimeLibrary="2"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="false"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\examples\xusb.c"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>xusb</ProjectName>
+ <ProjectGuid>{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\xusb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2010.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\xusb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>xusb</ProjectName>
+ <ProjectGuid>{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\xusb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2012.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\xusb.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectName>xusb</ProjectName>
+ <ProjectGuid>{3F3138D0-7AB7-4268-9BF3-1A3EA5503A11}</ProjectGuid>
+ <RootNamespace>examples</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v120</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)..\$(Platform)\$(Configuration)\examples\$(ProjectName)\</IntDir>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <BuildLog>
+ <Path>$(IntDir)$(ProjectName).htm</Path>
+ </BuildLog>
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <AdditionalIncludeDirectories>.;..\libusb;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <WarningLevel>Level3</WarningLevel>
+ </ClCompile>
+ <Link>
+ <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\examples\xusb.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include=".\libusb_static_2013.vcxproj">
+ <Project>{349ee8f9-7d25-4909-aaf5-ff3fade72187}</Project>
+ <ReferenceOutputAssembly>false</ReferenceOutputAssembly>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+TARGETNAME=xusb
+TARGETTYPE=PROGRAM
+386_STDCALL=0
+
+_NT_TARGET_VERSION= $(_NT_TARGET_VERSION_WINXP)
+
+!IFNDEF MSC_WARNING_LEVEL
+MSC_WARNING_LEVEL=/W3
+!ENDIF
+
+!IFDEF STATIC_LIBC
+USE_LIBCMT=1
+!ELSE
+USE_MSVCRT=1
+!ENDIF
+
+UMTYPE=console
+INCLUDES=..\..\msvc;..\..\libusb;$(DDK_INC_PATH)
+UMLIBS=..\..\libusb\os\obj$(BUILD_ALT_DIR)\*\libusb-1.0.lib
+SOURCES=..\xusb.c
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8.00"
+ Name="xusb"
+ ProjectGUID="{93F53A7E-6DEF-469A-ABD4-A5AD02A0A511}"
+ RootNamespace="xusb"
+ >
+ <Platforms>
+ <Platform
+ Name="STANDARDSDK_500 (ARMV4I)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSII_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (MIPSIV_FP)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (SH4)"
+ />
+ <Platform
+ Name="STANDARDSDK_500 (x86)"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory="%CSIDL_PROGRAM_FILES%\xusb"
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="_DEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;DEBUG;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="3"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (ARMV4I)"
+ OutputDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\ARMV4I\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII)"
+ OutputDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSII_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSII_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (MIPSIV_FP)"
+ OutputDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\MIPSIV_FP\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (SH4)"
+ OutputDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\SH4\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|STANDARDSDK_500 (x86)"
+ OutputDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples"
+ IntermediateDirectory="$(SolutionDir)..\x86\$(ConfigurationName)\examples\$(TargetName)"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="1"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ ExecutionBucket="7"
+ AdditionalIncludeDirectories="..\libusb;."
+ PreprocessorDefinitions="NDEBUG;_WIN32_WCE=$(CEVER);UNDER_CE;WINCE;_CONSOLE;$(ARCHFAM);$(_ARCHFAM_);_UNICODE;UNICODE"
+ MinimalRebuild="true"
+ RuntimeLibrary="2"
+ WarningLevel="3"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ GenerateDebugInformation="true"
+ SubSystem="9"
+ IgnoreDefaultLibraryNames="oldnames.lib,libc.lib"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ EntryPointSymbol="mainACRTStartup"
+ TargetMachine="0"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCCodeSignTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ <DeploymentTool
+ ForceDirty="-1"
+ RemoteDirectory=""
+ RegisterOutput="0"
+ AdditionalFiles=""
+ />
+ <DebuggerTool
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ <ProjectReference
+ ReferencedProjectIdentifier="{6A49B75F-FB1C-45C0-B7C3-A7698255E7E9}"
+ RelativePathToProject=".\libusb-1.0.vcproj"
+ />
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx"
+ UniqueIdentifier="{4FC737F1-C7A5-4376-A066-2A32D752A2FF}"
+ >
+ <File
+ RelativePath="..\examples\xusb.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc;xsd"
+ UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav"
+ UniqueIdentifier="{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+AM_CPPFLAGS = -I$(top_srcdir)/libusb
+LDADD = ../libusb/libusb-1.0.la
+
+noinst_PROGRAMS = stress
+
+stress_SOURCES = stress.c libusb_testlib.h testlib.c
--- /dev/null
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+noinst_PROGRAMS = stress$(EXEEXT)
+subdir = tests
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/libusb/version.h $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+PROGRAMS = $(noinst_PROGRAMS)
+am_stress_OBJECTS = stress.$(OBJEXT) testlib.$(OBJEXT)
+stress_OBJECTS = $(am_stress_OBJECTS)
+stress_LDADD = $(LDADD)
+stress_DEPENDENCIES = ../libusb/libusb-1.0.la
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(stress_SOURCES)
+DIST_SOURCES = $(stress_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLDFLAGS = @LTLDFLAGS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OS_DARWIN = @OS_DARWIN@
+OS_HAIKU = @OS_HAIKU@
+OS_LINUX = @OS_LINUX@
+OS_NETBSD = @OS_NETBSD@
+OS_OPENBSD = @OS_OPENBSD@
+OS_WINDOWS = @OS_WINDOWS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_UDEV = @USE_UDEV@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = -I$(top_srcdir)/libusb
+LDADD = ../libusb/libusb-1.0.la
+stress_SOURCES = stress.c libusb_testlib.h testlib.c
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstPROGRAMS:
+ @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+
+stress$(EXEEXT): $(stress_OBJECTS) $(stress_DEPENDENCIES) $(EXTRA_stress_DEPENDENCIES)
+ @rm -f stress$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(stress_OBJECTS) $(stress_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stress.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testlib.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+ clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
+ ctags-am distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/*
+ * libusb test library helper functions
+ * Copyright © 2012 Toby Gray <toby.gray@realvnc.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSB_TESTLIB_H
+#define LIBUSB_TESTLIB_H
+
+#include <stdio.h>
+
+#if !defined(bool)
+#define bool int
+#endif
+#if !defined(true)
+#define true (1 == 1)
+#endif
+#if !defined(false)
+#define false (!true)
+#endif
+
+/** Values returned from a test function to indicate test result */
+typedef enum {
+ /** Indicates that the test ran successfully. */
+ TEST_STATUS_SUCCESS,
+ /** Indicates that the test failed one or more test. */
+ TEST_STATUS_FAILURE,
+ /** Indicates that an unexpected error occurred. */
+ TEST_STATUS_ERROR,
+ /** Indicates that the test can't be run. For example this may be
+ * due to no suitable device being connected to perform the tests.*/
+ TEST_STATUS_SKIP
+} libusb_testlib_result;
+
+/**
+ * Context for test library functions
+ */
+typedef struct {
+ char ** test_names;
+ int test_count;
+ bool list_tests;
+ bool verbose;
+ int old_stdout;
+ int old_stderr;
+ FILE* output_file;
+ int null_fd;
+} libusb_testlib_ctx;
+
+/**
+ * Logs some test information or state
+ */
+void libusb_testlib_logf(libusb_testlib_ctx * ctx,
+ const char* fmt, ...);
+
+/**
+ * Function pointer for a libusb test function.
+ *
+ * Should return TEST_STATUS_SUCCESS on success or another TEST_STATUS value.
+ */
+typedef libusb_testlib_result
+(*libusb_testlib_test_function)(libusb_testlib_ctx * ctx);
+
+/**
+ * Structure holding a test description.
+ */
+typedef struct {
+ /** Human readable name of the test. */
+ const char * name;
+ /** The test library will call this function to run the test. */
+ libusb_testlib_test_function function;
+} libusb_testlib_test;
+
+/**
+ * Value to use at the end of a test array to indicate the last
+ * element.
+ */
+#define LIBUSB_NULL_TEST {NULL, NULL}
+
+/**
+ * Runs the tests provided.
+ *
+ * Before running any tests argc and argv will be processed
+ * to determine the mode of operation.
+ *
+ * \param argc The argc from main
+ * \param argv The argv from main
+ * \param tests A NULL_TEST terminated array of tests
+ * \return 0 on success, non-zero on failure
+ */
+int libusb_testlib_run_tests(int argc,
+ char ** argv,
+ const libusb_testlib_test * tests);
+
+#endif //LIBUSB_TESTLIB_H
--- /dev/null
+/*
+ * libusb stress test program to perform simple stress tests
+ * Copyright © 2012 Toby Gray <toby.gray@realvnc.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <memory.h>
+
+#include "libusb.h"
+#include "libusb_testlib.h"
+
+/** Test that creates and destroys a single concurrent context
+ * 10000 times. */
+static libusb_testlib_result test_init_and_exit(libusb_testlib_ctx * tctx)
+{
+ libusb_context * ctx = NULL;
+ int i;
+ for (i = 0; i < 10000; ++i) {
+ int r = libusb_init(&ctx);
+ if (r != LIBUSB_SUCCESS) {
+ libusb_testlib_logf(tctx,
+ "Failed to init libusb on iteration %d: %d",
+ i, r);
+ return TEST_STATUS_FAILURE;
+ }
+ libusb_exit(ctx);
+ ctx = NULL;
+ }
+
+ return TEST_STATUS_SUCCESS;
+}
+
+/** Tests that devices can be listed 1000 times. */
+static libusb_testlib_result test_get_device_list(libusb_testlib_ctx * tctx)
+{
+ libusb_context * ctx = NULL;
+ int r, i;
+ r = libusb_init(&ctx);
+ if (r != LIBUSB_SUCCESS) {
+ libusb_testlib_logf(tctx, "Failed to init libusb: %d", r);
+ return TEST_STATUS_FAILURE;
+ }
+ for (i = 0; i < 1000; ++i) {
+ libusb_device ** device_list;
+ ssize_t list_size = libusb_get_device_list(ctx, &device_list);
+ if (list_size < 0 || device_list == NULL) {
+ libusb_testlib_logf(tctx,
+ "Failed to get device list on iteration %d: %d (%p)",
+ i, -list_size, device_list);
+ return TEST_STATUS_FAILURE;
+ }
+ libusb_free_device_list(device_list, 1);
+ }
+ libusb_exit(ctx);
+ return TEST_STATUS_SUCCESS;
+}
+
+/** Tests that 100 concurrent device lists can be open at a time. */
+static libusb_testlib_result test_many_device_lists(libusb_testlib_ctx * tctx)
+{
+#define LIST_COUNT 100
+ libusb_context * ctx = NULL;
+ libusb_device ** device_lists[LIST_COUNT];
+ int r, i;
+ memset(device_lists, 0, sizeof(device_lists));
+
+ r = libusb_init(&ctx);
+ if (r != LIBUSB_SUCCESS) {
+ libusb_testlib_logf(tctx, "Failed to init libusb: %d", r);
+ return TEST_STATUS_FAILURE;
+ }
+
+ /* Create the 100 device lists. */
+ for (i = 0; i < LIST_COUNT; ++i) {
+ ssize_t list_size = libusb_get_device_list(ctx, &(device_lists[i]));
+ if (list_size < 0 || device_lists[i] == NULL) {
+ libusb_testlib_logf(tctx,
+ "Failed to get device list on iteration %d: %d (%p)",
+ i, -list_size, device_lists[i]);
+ return TEST_STATUS_FAILURE;
+ }
+ }
+
+ /* Destroy the 100 device lists. */
+ for (i = 0; i < LIST_COUNT; ++i) {
+ if (device_lists[i]) {
+ libusb_free_device_list(device_lists[i], 1);
+ device_lists[i] = NULL;
+ }
+ }
+
+ libusb_exit(ctx);
+ return TEST_STATUS_SUCCESS;
+#undef LIST_COUNT
+}
+
+/** Tests that the default context (used for various things including
+ * logging) works correctly when the first context created in a
+ * process is destroyed. */
+static libusb_testlib_result test_default_context_change(libusb_testlib_ctx * tctx)
+{
+ libusb_context * ctx = NULL;
+ int r, i;
+
+ for (i = 0; i < 100; ++i) {
+ /* First create a new context */
+ r = libusb_init(&ctx);
+ if (r != LIBUSB_SUCCESS) {
+ libusb_testlib_logf(tctx, "Failed to init libusb: %d", r);
+ return TEST_STATUS_FAILURE;
+ }
+
+ /* Enable debug output, to be sure to use the context */
+ libusb_set_debug(NULL, LIBUSB_LOG_LEVEL_DEBUG);
+ libusb_set_debug(ctx, LIBUSB_LOG_LEVEL_DEBUG);
+
+ /* Now create a reference to the default context */
+ r = libusb_init(NULL);
+ if (r != LIBUSB_SUCCESS) {
+ libusb_testlib_logf(tctx, "Failed to init libusb: %d", r);
+ return TEST_STATUS_FAILURE;
+ }
+
+ /* Destroy the first context */
+ libusb_exit(ctx);
+ /* Destroy the default context */
+ libusb_exit(NULL);
+ }
+
+ return TEST_STATUS_SUCCESS;
+}
+
+/* Fill in the list of tests. */
+static const libusb_testlib_test tests[] = {
+ {"init_and_exit", &test_init_and_exit},
+ {"get_device_list", &test_get_device_list},
+ {"many_device_lists", &test_many_device_lists},
+ {"default_context_change", &test_default_context_change},
+ LIBUSB_NULL_TEST
+};
+
+int main (int argc, char ** argv)
+{
+ return libusb_testlib_run_tests(argc, argv, tests);
+}
--- /dev/null
+/*
+ * libusb test library helper functions
+ * Copyright © 2012 Toby Gray <toby.gray@realvnc.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "libusb_testlib.h"
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+#if !defined(_WIN32_WCE)
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#endif
+
+#if defined(_WIN32_WCE)
+// No support for selective redirection of STDOUT on WinCE.
+#define DISABLE_STDOUT_REDIRECTION
+#define STDOUT_FILENO 1
+#elif defined(_WIN32)
+#include <io.h>
+#define dup _dup
+#define dup2 _dup2
+#define open _open
+#define close _close
+#define fdopen _fdopen
+#define NULL_PATH "nul"
+#define STDOUT_FILENO 1
+#define STDERR_FILENO 2
+#else
+#include <unistd.h>
+#define NULL_PATH "/dev/null"
+#endif
+#define INVALID_FD -1
+#define IGNORE_RETVAL(expr) do { (void)(expr); } while(0)
+
+/**
+ * Converts a test result code into a human readable string.
+ */
+static const char* test_result_to_str(libusb_testlib_result result)
+{
+ switch (result) {
+ case TEST_STATUS_SUCCESS:
+ return "Success";
+ case TEST_STATUS_FAILURE:
+ return "Failure";
+ case TEST_STATUS_ERROR:
+ return "Error";
+ case TEST_STATUS_SKIP:
+ return "Skip";
+ default:
+ return "Unknown";
+ }
+}
+
+static void print_usage(int argc, char ** argv)
+{
+ printf("Usage: %s [-l] [-v] [<test_name> ...]\n",
+ argc > 0 ? argv[0] : "test_*");
+ printf(" -l List available tests\n");
+ printf(" -v Don't redirect STDERR/STDOUT during tests\n");
+}
+
+static void cleanup_test_output(libusb_testlib_ctx * ctx)
+{
+#ifndef DISABLE_STDOUT_REDIRECTION
+ if (!ctx->verbose) {
+ if (ctx->old_stdout != INVALID_FD) {
+ IGNORE_RETVAL(dup2(ctx->old_stdout, STDOUT_FILENO));
+ ctx->old_stdout = INVALID_FD;
+ }
+ if (ctx->old_stderr != INVALID_FD) {
+ IGNORE_RETVAL(dup2(ctx->old_stderr, STDERR_FILENO));
+ ctx->old_stderr = INVALID_FD;
+ }
+ if (ctx->null_fd != INVALID_FD) {
+ close(ctx->null_fd);
+ ctx->null_fd = INVALID_FD;
+ }
+ if (ctx->output_file != stdout) {
+ fclose(ctx->output_file);
+ ctx->output_file = stdout;
+ }
+ }
+#endif
+}
+
+/**
+ * Setup test output handles
+ * \return zero on success, non-zero on failure
+ */
+static int setup_test_output(libusb_testlib_ctx * ctx)
+{
+#ifndef DISABLE_STDOUT_REDIRECTION
+ /* Stop output to stdout and stderr from being displayed if using non-verbose output */
+ if (!ctx->verbose) {
+ /* Keep a copy of STDOUT and STDERR */
+ ctx->old_stdout = dup(STDOUT_FILENO);
+ if (ctx->old_stdout < 0) {
+ ctx->old_stdout = INVALID_FD;
+ printf("Failed to duplicate stdout handle: %d\n", errno);
+ return 1;
+ }
+ ctx->old_stderr = dup(STDERR_FILENO);
+ if (ctx->old_stderr < 0) {
+ ctx->old_stderr = INVALID_FD;
+ cleanup_test_output(ctx);
+ printf("Failed to duplicate stderr handle: %d\n", errno);
+ return 1;
+ }
+ /* Redirect STDOUT_FILENO and STDERR_FILENO to /dev/null or "nul"*/
+ ctx->null_fd = open(NULL_PATH, O_WRONLY);
+ if (ctx->null_fd < 0) {
+ ctx->null_fd = INVALID_FD;
+ cleanup_test_output(ctx);
+ printf("Failed to open null handle: %d\n", errno);
+ return 1;
+ }
+ if ((dup2(ctx->null_fd, STDOUT_FILENO) < 0) ||
+ (dup2(ctx->null_fd, STDERR_FILENO) < 0)) {
+ cleanup_test_output(ctx);
+ return 1;
+ }
+ ctx->output_file = fdopen(ctx->old_stdout, "w");
+ if (!ctx->output_file) {
+ ctx->output_file = stdout;
+ cleanup_test_output(ctx);
+ printf("Failed to open FILE for output handle: %d\n", errno);
+ return 1;
+ }
+ }
+#endif
+ return 0;
+}
+
+void libusb_testlib_logf(libusb_testlib_ctx * ctx,
+ const char* fmt, ...)
+{
+ va_list va;
+ va_start(va, fmt);
+ vfprintf(ctx->output_file, fmt, va);
+ va_end(va);
+ fprintf(ctx->output_file, "\n");
+ fflush(ctx->output_file);
+}
+
+int libusb_testlib_run_tests(int argc,
+ char ** argv,
+ const libusb_testlib_test * tests)
+{
+ int run_count = 0;
+ int idx = 0;
+ int pass_count = 0;
+ int fail_count = 0;
+ int error_count = 0;
+ int skip_count = 0;
+ int r, j;
+ size_t arglen;
+ libusb_testlib_result test_result;
+ libusb_testlib_ctx ctx;
+
+ /* Setup default mode of operation */
+ ctx.test_names = NULL;
+ ctx.test_count = 0;
+ ctx.list_tests = false;
+ ctx.verbose = false;
+ ctx.old_stdout = INVALID_FD;
+ ctx.old_stderr = INVALID_FD;
+ ctx.output_file = stdout;
+ ctx.null_fd = INVALID_FD;
+
+ /* Parse command line options */
+ if (argc >= 2) {
+ for (j = 1; j < argc; j++) {
+ arglen = strlen(argv[j]);
+ if ( ((argv[j][0] == '-') || (argv[j][0] == '/')) &&
+ arglen >=2 ) {
+ switch (argv[j][1]) {
+ case 'l':
+ ctx.list_tests = true;
+ break;
+ case 'v':
+ ctx.verbose = true;
+ break;
+ default:
+ printf("Unknown option: '%s'\n", argv[j]);
+ print_usage(argc, argv);
+ return 1;
+ }
+ } else {
+ /* End of command line options, remaining must be list of tests to run */
+ ctx.test_names = argv + j;
+ ctx.test_count = argc - j;
+ break;
+ }
+ }
+ }
+
+ /* Validate command line options */
+ if (ctx.test_names && ctx.list_tests) {
+ printf("List of tests requested but test list provided\n");
+ print_usage(argc, argv);
+ return 1;
+ }
+
+ /* Setup test log output */
+ r = setup_test_output(&ctx);
+ if (r != 0)
+ return r;
+
+ /* Act on any options not related to running tests */
+ if (ctx.list_tests) {
+ while (tests[idx].function != NULL) {
+ libusb_testlib_logf(&ctx, tests[idx].name);
+ ++idx;
+ }
+ cleanup_test_output(&ctx);
+ return 0;
+ }
+
+ /* Run any requested tests */
+ while (tests[idx].function != NULL) {
+ const libusb_testlib_test * test = &tests[idx];
+ ++idx;
+ if (ctx.test_count > 0) {
+ /* Filtering tests to run, check if this is one of them */
+ int i;
+ for (i = 0; i < ctx.test_count; ++i) {
+ if (strcmp(ctx.test_names[i], test->name) == 0)
+ /* Matches a requested test name */
+ break;
+ }
+ if (i >= ctx.test_count) {
+ /* Failed to find a test match, so do the next loop iteration */
+ continue;
+ }
+ }
+ libusb_testlib_logf(&ctx,
+ "Starting test run: %s...", test->name);
+ test_result = test->function(&ctx);
+ libusb_testlib_logf(&ctx,
+ "%s (%d)",
+ test_result_to_str(test_result), test_result);
+ switch (test_result) {
+ case TEST_STATUS_SUCCESS: pass_count++; break;
+ case TEST_STATUS_FAILURE: fail_count++; break;
+ case TEST_STATUS_ERROR: error_count++; break;
+ case TEST_STATUS_SKIP: skip_count++; break;
+ }
+ ++run_count;
+ }
+ libusb_testlib_logf(&ctx, "---");
+ libusb_testlib_logf(&ctx, "Ran %d tests", run_count);
+ libusb_testlib_logf(&ctx, "Passed %d tests", pass_count);
+ libusb_testlib_logf(&ctx, "Failed %d tests", fail_count);
+ libusb_testlib_logf(&ctx, "Error in %d tests", error_count);
+ libusb_testlib_logf(&ctx, "Skipped %d tests", skip_count);
+
+ cleanup_test_output(&ctx);
+ return pass_count != run_count;
+}
#include <wx/utils.h>
#include <wx/wfstream.h>
#include <wx/windowptr.h>
+#include <wx/stream.h>
#include <wx/thread.h>
#include <wx/txtstrm.h>
#include "BoardPanel.hh"
#include "TargetPanel.hh"
#include "SCSI2SD_HID.hh"
-//#include "Dfu.hh"
+#include "Dfu.hh"
+
+#include "terminalwx.h"
#include <algorithm>
#include <iomanip>
namespace
{
-static uint8_t sdCrc7(uint8_t* chr, uint8_t cnt, uint8_t crc)
-{
- uint8_t a;
- for(a = 0; a < cnt; a++)
- {
- uint8_t data = chr[a];
- uint8_t i;
- for(i = 0; i < 8; i++)
- {
- crc <<= 1;
- if ((data & 0x80) ^ (crc & 0x80))
- {
- crc ^= 0x09;
- }
- data <<= 1;
- }
- }
- return crc & 0x7F;
-}
class TimerLock
{
wxFrame(NULL, wxID_ANY, "scsi2sd-util6", wxPoint(50, 50), wxSize(600, 700)),
myInitialConfig(false),
myTickCounter(0),
- myLastPollTime(0)
+ myLastPollTime(0),
+ myConsoleProcess(NULL)
{
wxMenu *menuFile = new wxMenu();
menuFile->Append(
btnPanel->Fit();
cfgPanel->Fit();
}
- //Fit(); // Needed to reduce window size on Windows
+
+#ifdef __WINDOWS__
+ Fit(); // Needed to reduce window size on Windows
+#else
FitInside(); // Needed on Linux to prevent status bar overlap
+#endif
myLogWindow = new wxLogWindow(this, _("scsi2sd-util6 debug log"), true);
myLogWindow->PassMessages(false); // Prevent messagebox popups
}
private:
- //Dfu myDfu;
+ Dfu myDfu;
wxLogWindow* myLogWindow;
BoardPanel* myBoardPanel;
std::vector<TargetPanel*> myTargets;
time_t myLastPollTime;
+ wxWindowPtr<TerminalWx> myConsoleTerm;
+ shared_ptr<wxProcess> myConsoleProcess;
+ wxInputStream* myConsoleStdout;
+ wxInputStream* myConsoleStderr;
+
+
void mmLogStatus(const std::string& msg)
{
// We set PassMessages to false on our log window to prevent popups, but
ID_SCSILog,
ID_SelfTest,
ID_SaveFile,
- ID_OpenFile
+ ID_OpenFile,
+ ID_ConsoleTerm
};
void OnID_ConfigDefaults(wxCommandEvent& event)
}
-/*
if (myDfu.hasDevice())
{
mmLogStatus("STM DFU Bootloader found");
doDFUUpdate(filename);
return;
}
-*/
}
catch (std::exception& e)
{
return;
}
+
std::stringstream ss;
ss << "dfu-util --download \""
<< filename.c_str() << "\" --alt 0 --reset";
+ wxLogMessage("Running: %s", ss.str());
+ myConsoleProcess.reset(new wxProcess(this));
std::string cmd = ss.str();
- int result = system(cmd.c_str());
-#ifdef WIN32
- if (result != 0)
-#else
- if (WEXITSTATUS(result) != 0)
-#endif
+ myConsoleProcess->Redirect();
+ long result = wxExecute(
+ cmd.c_str(),
+ wxEXEC_ASYNC,
+ myConsoleProcess.get()
+ );
+ if (!result)
{
wxMessageBox(
"Update failed",
- "Firmware update failed. Command = " + cmd,
+ "Firmware update failed (dfu-util not found ?) Command = " + cmd,
wxOK | wxICON_ERROR);
- return;
+ mmLogStatus("Firmware update failed");
+ myConsoleProcess.reset();
+ } else {
+ myConsoleStdout = myConsoleProcess->GetInputStream();
+ myConsoleStderr = myConsoleProcess->GetErrorStream();
+ wxFrame* frame(new wxFrame(this, wxID_ANY, "dfu-util"));
+ myConsoleTerm.reset(new TerminalWx(frame, wxID_ANY, wxDefaultPosition));
+ frame->Fit();
+ frame->Show();
+ }
+ }
+
+ void redirectDfuOutput()
+ {
+ if (myConsoleProcess)
+ {
+ std::stringstream ss;
+ while (myConsoleStderr && !myConsoleStderr->Eof() && myConsoleStderr->CanRead())
+ {
+ int c = myConsoleStderr->GetC();
+ if (c == '\n')
+ {
+ ss << "\r\n";
+ }
+ else if (c >= 0)
+ {
+ ss << (char) c;
+ }
+ }
+ while (myConsoleStdout && !myConsoleStdout->Eof() && myConsoleStdout->CanRead())
+ {
+ int c = myConsoleStdout->GetC();
+ if (c == '\n')
+ {
+ ss << "\r\n";
+ }
+ else if (c >= 0)
+ {
+ ss << (char) c;
+ }
+ }
+ myConsoleTerm->DisplayCharsUnsafe(ss.str());
+ }
+ }
+
+ void doFinishDfu(wxProcessEvent& event)
+ {
+ redirectDfuOutput();
+
+ if (event.GetExitCode() == 0)
+ {
+ wxMessageBox(
+ "Update complete",
+ "Firmware update complete. Please reconnect USB cable.",
+ wxOK | wxICON_ERROR);
+ mmLogStatus("Firmware update succeeded");
+ } else {
+ wxMessageBox(
+ "Update failed",
+ "Firmware update failed.",
+ wxOK | wxICON_ERROR);
+ mmLogStatus("Firmware update failed");
}
+
+ myConsoleStdout = myConsoleStderr = NULL;
+ myConsoleProcess.reset();
+ myConsoleTerm->GetParent()->Close();
+ myConsoleTerm->Close();
+ myConsoleTerm.reset();
+
}
void dumpSCSICommand(std::vector<uint8_t> buf)
void OnID_Timer(wxTimerEvent& event)
{
+ redirectDfuOutput();
+
logSCSI();
time_t now = time(NULL);
if (now == myLastPollTime) return;
myHID->getSDCapacity() << std::endl;
sdinfo << "SD CSD Register: ";
- if (sdCrc7(&csd[0], 15, 0) != (csd[15] >> 1))
- {
- sdinfo << "BADCRC ";
- }
for (size_t i = 0; i < csd.size(); ++i)
{
sdinfo <<
}
sdinfo << std::endl;
sdinfo << "SD CID Register: ";
- if (sdCrc7(&cid[0], 15, 0) != (cid[15] >> 1))
- {
- sdinfo << "BADCRC ";
- }
for (size_t i = 0; i < cid.size(); ++i)
{
sdinfo <<
if (mySelfTestChk->IsChecked())
{
std::stringstream scsiInfo;
- scsiInfo << "SCSI Self-Test: " <<
- (myHID->scsiSelfTest() ? "Passed" : "FAIL");
+ int errcode;
+ scsiInfo << "SCSI Self-Test: ";
+ if (myHID->scsiSelfTest(errcode))
+ {
+ scsiInfo << "Passed";
+ }
+ else
+ {
+ scsiInfo << "FAIL (" << errcode << ")";
+ }
wxLogMessage(this, "%s", scsiInfo.str());
}
EVT_CLOSE(AppFrame::OnCloseEvt)
+ EVT_END_PROCESS(wxID_ANY, AppFrame::doFinishDfu)
+
wxEND_EVENT_TABLE()
projects / SCSI2SD-V6.git / commitdiff