-201408XX 3.6
+201412XX 3.6
- Fix handling requests for LUNs other than 0 from SCSI-2 hosts.
- Handle glitches of the scsi signals to improve stability and operate with
multiple devices on the SCSI bus.
- Re-add parity checking. This can be disabled using scsi2sd-config if
required.
- Added disconnect/reconnect support during SD card writes.
+ - Preliminary CDROM device support (incomplete)
+ - New configuration method. Data is now stored in flash to allow room for
+ custom VPD tables. The old eeprom configuration is ignored.
+ - Support for up to 4 SCSI targets.
+ - scsi2sd-config and bootloader hosts utilities are replaced by the
+ new scsi2sd-util GUI.
+ - Fix for SD cards with Samsung controllers which expect a "stop" bit
+ in each SD command over SPI.
20140718 3.5.2
- Fix blank SCSI ID in scsi2sd-config output.
--- /dev/null
+// Copyright (C) 2014 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of SCSI2SD.
+//
+// SCSI2SD is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// SCSI2SD is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with SCSI2SD. If not, see <http://www.gnu.org/licenses/>.
+
+#include "device.h"
+#include "scsi.h"
+#include "config.h"
+#include "cdrom.h"
+
+uint8_t SimpleTOC[] =
+{
+ 0x00, // toc length, MSB
+ 0x0A, // toc length, LSB
+ 0x01, // First track number
+ 0x01, // Last track number,
+ // TRACK 1 Descriptor
+ 0x00, // reservied
+ 0x06, // Q sub-channel not supplied, Digital track
+ 0x01, // Track 1,
+ 0x00, // Reserved
+ 0x00,0x00,0x00,0x00 // Track start sector (LBA)
+};
+
+void doReadTOC(int MSF, uint8_t track, uint16_t allocationLength)
+{
+ // We only support track 1.
+ // track 0 means "return all tracks"
+ if (track > 1)
+ {
+ scsiDev.status = CHECK_CONDITION;
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;
+ scsiDev.phase = STATUS;
+ }
+ else if (MSF)
+ {
+ // MSF addressing not currently supported.
+ scsiDev.status = CHECK_CONDITION;
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;
+ scsiDev.phase = STATUS;
+ }
+ else
+ {
+ uint32_t len = sizeof(SimpleTOC);
+ memcpy(scsiDev.data, SimpleTOC, len);
+ if (len > allocationLength)
+ {
+ len = allocationLength;
+ }
+ scsiDev.dataLen = len;
+ scsiDev.phase = DATA_IN;
+ }
+}
+
+uint8_t SimpleHeader[] =
+{
+ 0x01, // 2048byte user data, L-EC in 288 byte aux field.
+ 0x00, // reserved
+ 0x00, // reserved
+ 0x00, // reserved
+ 0x00,0x00,0x00,0x00 // Track start sector (LBA)
+};
+
+void doReadHeader(int MSF, uint32_t lba, uint16_t allocationLength)
+{
+ if (MSF)
+ {
+ // MSF addressing not currently supported.
+ scsiDev.status = CHECK_CONDITION;
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;
+ scsiDev.phase = STATUS;
+ }
+ else
+ {
+ uint32_t len = sizeof(SimpleHeader);
+ memcpy(scsiDev.data, SimpleHeader, len);
+ if (len > allocationLength)
+ {
+ len = allocationLength;
+ }
+ scsiDev.dataLen = len;
+ scsiDev.phase = DATA_IN;
+ }
+}
+
+
+// Handle direct-access scsi device commands
+int scsiCDRomCommand()
+{
+ int commandHandled = 1;
+
+ uint8 command = scsiDev.cdb[0];
+ if (scsiDev.target->cfg->deviceType == CONFIG_OPTICAL)
+ {
+ if (command == 0x43)
+ {
+ // CD-ROM Read TOC
+ int MSF = scsiDev.cdb[1] & 0x02 ? 1 : 0;
+ uint8_t track = scsiDev.cdb[6];
+ uint16_t allocationLength =
+ (((uint32_t) scsiDev.cdb[7]) << 8) +
+ scsiDev.cdb[8];
+
+ doReadTOC(MSF, track, allocationLength);
+ }
+ else if (command == 0x44)
+ {
+ // CD-ROM Read Header
+ int MSF = scsiDev.cdb[1] & 0x02 ? 1 : 0;
+ uint32_t lba = 0; // IGNORED for now
+ uint16_t allocationLength =
+ (((uint32_t) scsiDev.cdb[7]) << 8) +
+ scsiDev.cdb[8];
+ doReadHeader(MSF, lba, allocationLength);
+ }
+ else
+ {
+ commandHandled = 0;
+ }
+ }
+ else
+ {
+ commandHandled = 0;
+ }
+
+ return commandHandled;
+}
--- /dev/null
+// Copyright (C) 2014 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of SCSI2SD.
+//
+// SCSI2SD is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// SCSI2SD is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with SCSI2SD. If not, see <http://www.gnu.org/licenses/>.
+#ifndef CDROM_H
+#define CDROM_H
+
+int scsiCDRomCommand(void);
+
+#endif
\r
#include <string.h>\r
\r
-// CYDEV_EEPROM_ROW_SIZE == 16.\r
-static const char magic[CYDEV_EEPROM_ROW_SIZE] = "codesrc_00000002";\r
static const uint16_t FIRMWARE_VERSION = 0x0360;\r
\r
-// Config shadow RAM (copy of EEPROM)\r
-static Config shadow =\r
-{\r
- 0, // SCSI ID\r
- " codesrc", // vendor (68k Apple Drive Setup: Set to " SEAGATE")\r
- " SCSI2SD", //prodId (68k Apple Drive Setup: Set to " ST225N")\r
- " 3.6", // revision (68k Apple Drive Setup: Set to "1.0 ")\r
- 1, // enable parity\r
- 1, // enable unit attention,\r
- 0, // RESERVED\r
- 0, // Max sectors (0 == disabled)\r
- 512 // Sector size\r
- // reserved bytes will be initialised to 0.\r
-};\r
-\r
enum USB_ENDPOINTS\r
{\r
USB_EP_OUT = 1,\r
static int usbDebugEpState;\r
static int usbReady;\r
\r
-// Global\r
-Config* config = NULL;\r
-\r
-// The PSoC 5LP compile to little-endian format.\r
-static uint32_t ntohl(uint32_t val)\r
-{\r
- return\r
- ((val & 0xFF) << 24) |\r
- ((val & 0xFF00) << 8) |\r
- ((val >> 8) & 0xFF00) |\r
- ((val >> 24) & 0xFF);\r
-}\r
-static uint16_t ntohs(uint16_t val)\r
-{\r
- return\r
- ((val & 0xFF) << 8) |\r
- ((val >> 8) & 0xFF);\r
-}\r
-static uint32_t htonl(uint32_t val)\r
-{\r
- return\r
- ((val & 0xFF) << 24) |\r
- ((val & 0xFF00) << 8) |\r
- ((val >> 8) & 0xFF00) |\r
- ((val >> 24) & 0xFF);\r
-}\r
-static uint16_t htons(uint16_t val)\r
-{\r
- return\r
- ((val & 0xFF) << 8) |\r
- ((val >> 8) & 0xFF);\r
-}\r
-\r
-static void saveConfig()\r
-{\r
- int shadowRows = (sizeof(shadow) / CYDEV_EEPROM_ROW_SIZE) + 1;\r
- int row;\r
- int status = CYRET_SUCCESS;\r
-\r
- CySetTemp();\r
- for (row = 0; (row < shadowRows) && (status == CYRET_SUCCESS); ++row)\r
- {\r
- CFG_EEPROM_Write(((uint8*)&shadow) + (row * CYDEV_EEPROM_ROW_SIZE), row);\r
- }\r
- if (status == CYRET_SUCCESS)\r
- {\r
- CFG_EEPROM_Write((uint8*)magic, row);\r
- }\r
-}\r
-\r
void configInit()\r
{\r
- int shadowRows, shadowBytes;\r
- uint8* eeprom = (uint8*)CYDEV_EE_BASE;\r
-\r
- // We could map cfgPtr directly into the EEPROM memory,\r
- // but that would waste power. Copy it to RAM then turn off\r
- // the EEPROM.\r
- CFG_EEPROM_Start();\r
- CyDelayUs(5); // 5us to start per datasheet.\r
-\r
- // Check magic\r
- shadowRows = (sizeof(shadow) / CYDEV_EEPROM_ROW_SIZE) + 1;\r
- shadowBytes = CYDEV_EEPROM_ROW_SIZE * shadowRows;\r
-\r
- if (memcmp(eeprom + shadowBytes, magic, sizeof(magic)))\r
- {\r
- // Initial state, invalid, or upgrade required.\r
- if (!memcmp(eeprom + shadowBytes, magic, sizeof(magic) - 1) &&\r
- ((eeprom + shadowBytes)[sizeof(magic) - 2] == '1'))\r
- {\r
- // Upgrade from version 1.\r
- memcpy(&shadow, eeprom, sizeof(shadow));\r
- shadow.bytesPerSector = 512;\r
- }\r
-\r
- saveConfig();\r
- }\r
- else\r
- {\r
- memcpy(&shadow, eeprom, sizeof(shadow));\r
- }\r
-\r
- config = &shadow;\r
- CFG_EEPROM_Stop();\r
-\r
// The USB block will be powered by an internal 3.3V regulator.\r
// The PSoC must be operating between 4.6V and 5V for the regulator\r
// to work.\r
hidBuffer[14] = scsiDev.lastStatus;\r
hidBuffer[15] = scsiDev.lastSense;\r
hidBuffer[16] = scsiDev.phase;\r
- hidBuffer[17] = SCSI_ReadPin(SCSI_In_BSY);\r
- hidBuffer[18] = SCSI_ReadPin(SCSI_In_SEL);\r
- hidBuffer[19] = SCSI_ReadPin(SCSI_ATN_INT);\r
- hidBuffer[20] = SCSI_ReadPin(SCSI_RST_INT);\r
+ hidBuffer[17] = SCSI_ReadFilt(SCSI_Filt_BSY);\r
+ hidBuffer[18] = SCSI_ReadFilt(SCSI_Filt_SEL);\r
+ hidBuffer[19] = SCSI_ReadFilt(SCSI_Filt_ATN);\r
+ hidBuffer[20] = SCSI_ReadFilt(SCSI_Filt_RST);\r
hidBuffer[21] = scsiDev.rstCount;\r
hidBuffer[22] = scsiDev.selCount;\r
hidBuffer[23] = scsiDev.msgCount;\r
// Public method for storing MODE SELECT results.\r
void configSave()\r
{\r
- CFG_EEPROM_Start();\r
- saveConfig(); // write to eeprom\r
- CFG_EEPROM_Stop();\r
+// TODO REIMPLEMENT\r
+// CFG_EEPROM_Start();\r
+// saveConfig(); // write to eeprom\r
+// CFG_EEPROM_Stop();\r
}\r
\r
+\r
+const TargetConfig* getConfigByIndex(int i)\r
+{\r
+ size_t row = SCSI_CONFIG_0_ROW + (i * SCSI_CONFIG_ROWS);\r
+ return (const TargetConfig*)\r
+ (\r
+ CY_FLASH_BASE +\r
+ (CY_FLASH_SIZEOF_ARRAY * (size_t) SCSI_CONFIG_ARRAY) +\r
+ (CY_FLASH_SIZEOF_ROW * row)\r
+ );\r
+}\r
+\r
+const TargetConfig* getConfigById(int scsiId)\r
+{\r
+ int i;\r
+ for (i = 0; i < MAX_SCSI_TARGETS; ++i)\r
+ {\r
+ const TargetConfig* tgt = getConfigByIndex(i);\r
+ if ((tgt->scsiId & CONFIG_TARGET_ID_BITS) == scsiId)\r
+ {\r
+ return tgt;\r
+ }\r
+ }\r
+ return NULL;\r
+\r
+}\r
+\r
+\r
#define Config_H\r
\r
#include "device.h"\r
-\r
-typedef struct\r
-{\r
- uint8 scsiId;\r
- char vendor[8];\r
- char prodId[16];\r
- char revision[4];\r
- uint8 enableParity;\r
- uint8 enableUnitAttention;\r
- uint8 reserved1; // Unused. Ensures maxBlocks is aligned.\r
- uint32 maxSectors;\r
- uint16 bytesPerSector;\r
-\r
- // Pad to 64 bytes, which is what we can fit into a USB HID packet.\r
- char reserved[26]; \r
-} Config;\r
-\r
-extern Config* config;\r
+#include "scsi2sd.h"\r
\r
void configInit(void);\r
void debugInit(void);\r
void configPoll(void);\r
void configSave(void);\r
\r
+const TargetConfig* getConfigByIndex(int index);\r
+const TargetConfig* getConfigById(int scsiId);\r
+\r
#endif\r
// Nowhere to store this data!\r
// Shouldn't happen - our buffer should be many magnitudes larger\r
// than the required size for diagnostic parameters.\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.status = CHECK_CONDITION;\r
scsiDev.phase = STATUS;\r
}\r
// Convert each supplied address back to a simple\r
// 64bit linear address, then convert back again.\r
uint64 fromByteAddr =\r
- scsiByteAddress(suppliedFmt, &scsiDev.data[6]);\r
+ scsiByteAddress(scsiDev.target->cfg, suppliedFmt, &scsiDev.data[6]);\r
\r
- scsiSaveByteAddress(translateFmt, fromByteAddr, &scsiDev.data[6]);\r
+ scsiSaveByteAddress(\r
+ scsiDev.target->cfg, translateFmt, fromByteAddr, &scsiDev.data[6]);\r
\r
// Fill out the rest of the response.\r
// (Clear out any optional bits).\r
{\r
// error.\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
\r
scsiDev.cdb[5];\r
int pmi = scsiDev.cdb[8] & 1;\r
\r
- uint32_t capacity = getScsiCapacity();\r
+ uint32_t capacity = getScsiCapacity(scsiDev.target->cfg);\r
\r
if (!pmi && lba)\r
{\r
// assume that delays are constant across each block. But the spec\r
// says we must return this error if pmi is specified incorrectly.\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
else if (capacity > 0)\r
scsiDev.data[2] = highestBlock >> 8;\r
scsiDev.data[3] = highestBlock;\r
\r
- scsiDev.data[4] = config->bytesPerSector >> 24;\r
- scsiDev.data[5] = config->bytesPerSector >> 16;\r
- scsiDev.data[6] = config->bytesPerSector >> 8;\r
- scsiDev.data[7] = config->bytesPerSector;\r
+ uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector;\r
+ scsiDev.data[4] = bytesPerSector >> 24;\r
+ scsiDev.data[5] = bytesPerSector >> 16;\r
+ scsiDev.data[6] = bytesPerSector >> 8;\r
+ scsiDev.data[7] = bytesPerSector;\r
scsiDev.dataLen = 8;\r
scsiDev.phase = DATA_IN;\r
}\r
else\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = NOT_READY;\r
- scsiDev.sense.asc = MEDIUM_NOT_PRESENT;\r
+ scsiDev.target->sense.code = NOT_READY;\r
+ scsiDev.target->sense.asc = MEDIUM_NOT_PRESENT;\r
scsiDev.phase = STATUS;\r
}\r
}\r
if (blockDev.state & DISK_WP)\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = WRITE_PROTECTED;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = WRITE_PROTECTED;\r
scsiDev.phase = STATUS;\r
}\r
- else if (((uint64) lba) + blocks > getScsiCapacity())\r
+ else if (((uint64) lba) + blocks > getScsiCapacity(scsiDev.target->cfg))\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
transfer.blocks = blocks;\r
transfer.currentBlock = 0;\r
scsiDev.phase = DATA_OUT;\r
- scsiDev.dataLen = config->bytesPerSector;\r
- scsiDev.dataPtr = config->bytesPerSector; // TODO FIX scsiDiskPoll()\r
+ scsiDev.dataLen = scsiDev.target->cfg->bytesPerSector;\r
+ scsiDev.dataPtr = scsiDev.target->cfg->bytesPerSector;\r
\r
// No need for single-block writes atm. Overhead of the\r
// multi-block write is minimal.\r
\r
static void doRead(uint32 lba, uint32 blocks)\r
{\r
- uint32_t capacity = getScsiCapacity();\r
+ uint32_t capacity = getScsiCapacity(scsiDev.target->cfg);\r
if (((uint64) lba) + blocks > capacity)\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
\r
static void doSeek(uint32 lba)\r
{\r
- if (lba >= getScsiCapacity())\r
+ if (lba >= getScsiCapacity(scsiDev.target->cfg))\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;\r
scsiDev.phase = STATUS;\r
}\r
}\r
{\r
ready = 0;\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = NOT_READY;\r
- scsiDev.sense.asc = LOGICAL_UNIT_NOT_READY_INITIALIZING_COMMAND_REQUIRED;\r
+ scsiDev.target->sense.code = NOT_READY;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_READY_INITIALIZING_COMMAND_REQUIRED;\r
scsiDev.phase = STATUS;\r
}\r
else if (!(blockDev.state & DISK_PRESENT))\r
{\r
ready = 0;\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = NOT_READY;\r
- scsiDev.sense.asc = MEDIUM_NOT_PRESENT;\r
+ scsiDev.target->sense.code = NOT_READY;\r
+ scsiDev.target->sense.asc = MEDIUM_NOT_PRESENT;\r
scsiDev.phase = STATUS;\r
}\r
else if (!(blockDev.state & DISK_INITIALISED))\r
{\r
ready = 0;\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = NOT_READY;\r
- scsiDev.sense.asc = LOGICAL_UNIT_NOT_READY_CAUSE_NOT_REPORTABLE;\r
+ scsiDev.target->sense.code = NOT_READY;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_READY_CAUSE_NOT_REPORTABLE;\r
scsiDev.phase = STATUS;\r
}\r
return ready;\r
// TODO. This means they are supplying data to verify against.\r
// Technically we should probably grab the data and compare it.\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
}\r
{\r
scsiEnterPhase(DATA_IN);\r
\r
- int totalSDSectors = transfer.blocks * SDSectorsPerSCSISector();\r
- uint32_t sdLBA = SCSISector2SD(transfer.lba);\r
+ int totalSDSectors =\r
+ transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg);\r
+ uint32_t sdLBA = SCSISector2SD(scsiDev.target->cfg, transfer.lba);\r
int buffers = sizeof(scsiDev.data) / SD_SECTOR_SIZE;\r
int prep = 0;\r
int i = 0;\r
else if ((scsiActive == 0) && ((prep - i) > 0))\r
{\r
int dmaBytes = SD_SECTOR_SIZE;\r
- if (i % SDSectorsPerSCSISector() == SDSectorsPerSCSISector() - 1)\r
+ if ((i % SDSectorsPerSCSISector(scsiDev.target->cfg)) ==\r
+ (SDSectorsPerSCSISector(scsiDev.target->cfg) - 1))\r
{\r
- dmaBytes = config->bytesPerSector % SD_SECTOR_SIZE;\r
+ dmaBytes = scsiDev.target->cfg->bytesPerSector % SD_SECTOR_SIZE;\r
if (dmaBytes == 0) dmaBytes = SD_SECTOR_SIZE;\r
}\r
scsiWriteDMA(&scsiDev.data[SD_SECTOR_SIZE * (i % buffers)], dmaBytes);\r
{\r
scsiEnterPhase(DATA_OUT);\r
\r
- int totalSDSectors = transfer.blocks * SDSectorsPerSCSISector();\r
+ int totalSDSectors =\r
+ transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg);\r
int buffers = sizeof(scsiDev.data) / SD_SECTOR_SIZE;\r
int prep = 0;\r
int i = 0;\r
!scsiDisconnected)\r
{\r
int dmaBytes = SD_SECTOR_SIZE;\r
- if (prep % SDSectorsPerSCSISector() == SDSectorsPerSCSISector() - 1)\r
+ if ((prep % SDSectorsPerSCSISector(scsiDev.target->cfg)) ==\r
+ (SDSectorsPerSCSISector(scsiDev.target->cfg) - 1))\r
{\r
- dmaBytes = config->bytesPerSector % SD_SECTOR_SIZE;\r
+ dmaBytes = scsiDev.target->cfg->bytesPerSector % SD_SECTOR_SIZE;\r
if (dmaBytes == 0) dmaBytes = SD_SECTOR_SIZE;\r
}\r
scsiReadDMA(&scsiDev.data[SD_SECTOR_SIZE * (prep % buffers)], dmaBytes);\r
\r
if (scsiDev.phase == DATA_OUT)\r
{\r
- if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode)\r
+ if (scsiDev.parityError &&\r
+ (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) &&\r
+ !scsiDev.compatMode)\r
{\r
- scsiDev.sense.code = ABORTED_COMMAND;\r
- scsiDev.sense.asc = SCSI_PARITY_ERROR;\r
+ scsiDev.target->sense.code = ABORTED_COMMAND;\r
+ scsiDev.target->sense.asc = SCSI_PARITY_ERROR;\r
scsiDev.status = CHECK_CONDITION;;\r
}\r
scsiDev.phase = STATUS;\r
\r
#include <string.h>\r
\r
-uint32_t getScsiCapacity()\r
+uint32_t getScsiCapacity(const TargetConfig* config)\r
{\r
- uint32_t capacity = sdDev.capacity / SDSectorsPerSCSISector();\r
- if (config->maxSectors && (capacity > config->maxSectors))\r
+ uint32_t capacity =\r
+ (sdDev.capacity - config->sdSectorStart) /\r
+ SDSectorsPerSCSISector(config);\r
+ if (config->scsiSectors && (capacity > config->scsiSectors))\r
{\r
- capacity = config->maxSectors;\r
+ capacity = config->scsiSectors;\r
}\r
return capacity;\r
}\r
\r
\r
-uint32_t SCSISector2SD(uint32_t scsiSector)\r
+uint32_t SCSISector2SD(const TargetConfig* config, uint32_t scsiSector)\r
{\r
- return scsiSector * SDSectorsPerSCSISector();\r
+ return scsiSector * SDSectorsPerSCSISector(config) + config->sdSectorStart;\r
}\r
\r
// Standard mapping according to ECMA-107 and ISO/IEC 9293:1994\r
*s = (lba % SCSI_SECTORS_PER_TRACK) + 1;\r
}\r
\r
-uint64 scsiByteAddress(int format, const uint8* addr)\r
+uint64 scsiByteAddress(const TargetConfig* config, int format, const uint8* addr)\r
{\r
uint64 result;\r
switch (format)\r
}\r
\r
\r
-void scsiSaveByteAddress(int format, uint64 byteAddr, uint8* buf)\r
+void scsiSaveByteAddress(const TargetConfig* config, int format, uint64 byteAddr, uint8* buf)\r
{\r
uint32 lba = byteAddr / config->bytesPerSector;\r
uint32 byteOffset = byteAddr % config->bytesPerSector;\r
ADDRESS_PHYSICAL_SECTOR = 5
} SCSI_ADDRESS_FORMAT;
-static inline int SDSectorsPerSCSISector()
+static inline int SDSectorsPerSCSISector(const TargetConfig* config)
{
return (config->bytesPerSector + SD_SECTOR_SIZE - 1) / SD_SECTOR_SIZE;
}
-uint32_t getScsiCapacity();
+uint32_t getScsiCapacity(const TargetConfig* config);
-uint32_t SCSISector2SD(uint32_t scsiSector);
+uint32_t SCSISector2SD(const TargetConfig* config, uint32_t scsiSector);
uint64 CHS2LBA(uint32 c, uint8 h, uint32 s);
void LBA2CHS(uint32 lba, uint32* c, uint8* h, uint32* s);
// Convert an address in the given SCSI_ADDRESS_FORMAT to
// a linear byte address.
// addr must be >= 8 bytes.
-uint64 scsiByteAddress(int format, const uint8* addr);
-void scsiSaveByteAddress(int format, uint64 byteAddr, uint8* buf);
+uint64 scsiByteAddress(
+ const TargetConfig* config, int format, const uint8* addr);
+void scsiSaveByteAddress(
+ const TargetConfig* config, int format, uint64 byteAddr, uint8* buf);
#endif
{\r
// error.\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
else\r
{\r
+ const TargetConfig* config = scsiDev.target->cfg;\r
memcpy(scsiDev.data, StandardResponse, sizeof(StandardResponse));\r
memcpy(&scsiDev.data[8], config->vendor, sizeof(config->vendor));\r
memcpy(&scsiDev.data[16], config->prodId, sizeof(config->prodId));\r
{\r
// error.\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
\r
}\r
// Spec 8.2.5 requires us to simply truncate the response if it's too big.\r
scsiDev.dataLen = allocationLength;\r
+ \r
+ // Set the device type as needed.\r
+ switch (scsiDev.target->cfg->deviceType)\r
+ {\r
+ case CONFIG_OPTICAL:\r
+ scsiDev.data[0] = 0x05; // device type\r
+ scsiDev.data[1] |= 0x80; // Removable bit.\r
+ break;\r
+ case CONFIG_REMOVEABLE:\r
+ scsiDev.data[1] |= 0x80; // Removable bit.\r
+ break;\r
+ default:\r
+ // Accept defaults for a fixed disk.\r
+ break;\r
+ }\r
}\r
\r
// Set the first byte to indicate LUN presence.\r
if (pc == 0x03) // Saved Values not supported.\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = SAVING_PARAMETERS_NOT_SUPPORTED;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = SAVING_PARAMETERS_NOT_SUPPORTED;\r
scsiDev.phase = STATUS;\r
}\r
else\r
scsiDev.data[idx++] = 0; // reserved\r
\r
// Block length\r
- scsiDev.data[idx++] = config->bytesPerSector >> 16;\r
- scsiDev.data[idx++] = config->bytesPerSector >> 8;\r
- scsiDev.data[idx++] = config->bytesPerSector & 0xFF;\r
+ uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector;\r
+ scsiDev.data[idx++] = bytesPerSector >> 16;\r
+ scsiDev.data[idx++] = bytesPerSector >> 8;\r
+ scsiDev.data[idx++] = bytesPerSector & 0xFF;\r
}\r
\r
switch (pageCode)\r
if (pc != 0x01)\r
{\r
// Fill out the configured bytes-per-sector\r
- scsiDev.data[idx+12] = config->bytesPerSector >> 8;\r
- scsiDev.data[idx+13] = config->bytesPerSector & 0xFF;\r
+ uint32_t bytesPerSector = scsiDev.target->cfg->bytesPerSector;\r
+ scsiDev.data[idx+12] = bytesPerSector >> 8;\r
+ scsiDev.data[idx+13] = bytesPerSector & 0xFF;\r
}\r
else\r
{\r
uint32 cyl;\r
uint8 head;\r
uint32 sector;\r
- LBA2CHS(getScsiCapacity(), &cyl, &head, §or);\r
+ LBA2CHS(getScsiCapacity(scsiDev.target->cfg), &cyl, &head, §or);\r
\r
scsiDev.data[idx+2] = cyl >> 16;\r
scsiDev.data[idx+3] = cyl >> 8;\r
// Unknown Page Code\r
pageFound = 0;\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
\r
{\r
// Page not found\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
scsiDev.phase = STATUS;\r
}\r
}\r
{\r
goto bad;\r
}\r
- else if (bytesPerSector != config->bytesPerSector)\r
+ else if (bytesPerSector != scsiDev.target->cfg->bytesPerSector)\r
{\r
- config->bytesPerSector = bytesPerSector;\r
+ // TODO REIMPLEMENT CONFIG SAVEconfig->bytesPerSector = bytesPerSector;\r
configSave();\r
}\r
}\r
goto bad;\r
}\r
\r
- config->bytesPerSector = bytesPerSector;\r
+ // TODO CONFIGFAVE REIMPLEMENT config->bytesPerSector = bytesPerSector;\r
if (scsiDev.cdb[1] & 1) // SP Save Pages flag\r
{\r
configSave();\r
goto out;\r
bad:\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_PARAMETER_LIST;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_PARAMETER_LIST;\r
\r
out:\r
scsiDev.phase = STATUS;\r
#include "mode.h"\r
#include "disk.h"\r
#include "time.h"\r
+#include "cdrom.h"\r
\r
#include <string.h>\r
\r
scsiDev.phase = STATUS;\r
\r
scsiDev.lastStatus = scsiDev.status;\r
- scsiDev.lastSense = scsiDev.sense.code;\r
+ scsiDev.lastSense = scsiDev.target->sense.code;\r
}\r
\r
static void process_Status()\r
scsiWriteByte(scsiDev.status);\r
\r
scsiDev.lastStatus = scsiDev.status;\r
- scsiDev.lastSense = scsiDev.sense.code;\r
+ scsiDev.lastSense = scsiDev.target->sense.code;\r
\r
// Command Complete occurs AFTER a valid status has been\r
// sent. then we go bus-free.\r
scsiRead(scsiDev.data + scsiDev.dataPtr, len);\r
scsiDev.dataPtr += len;\r
\r
- if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode)\r
+ if (scsiDev.parityError &&\r
+ (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) &&\r
+ !scsiDev.compatMode)\r
{\r
- scsiDev.sense.code = ABORTED_COMMAND;\r
- scsiDev.sense.asc = SCSI_PARITY_ERROR;\r
+ scsiDev.target->sense.code = ABORTED_COMMAND;\r
+ scsiDev.target->sense.asc = SCSI_PARITY_ERROR;\r
enter_Status(CHECK_CONDITION);\r
}\r
}\r
memset(scsiDev.cdb, 0xff, sizeof(scsiDev.cdb));\r
return;\r
}\r
- else if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode)\r
+ else if (scsiDev.parityError &&\r
+ (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) &&\r
+ !scsiDev.compatMode)\r
{\r
- scsiDev.sense.code = ABORTED_COMMAND;\r
- scsiDev.sense.asc = SCSI_PARITY_ERROR;\r
+ scsiDev.target->sense.code = ABORTED_COMMAND;\r
+ scsiDev.target->sense.asc = SCSI_PARITY_ERROR;\r
enter_Status(CHECK_CONDITION);\r
}\r
else if ((control & 0x02) && ((control & 0x01) == 0))\r
{\r
// FLAG set without LINK flag.\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
enter_Status(CHECK_CONDITION);\r
}\r
else if (command == 0x12)\r
\r
memset(scsiDev.data, 0, 256); // Max possible alloc length\r
scsiDev.data[0] = 0xF0;\r
- scsiDev.data[2] = scsiDev.sense.code & 0x0F;\r
+ scsiDev.data[2] = scsiDev.target->sense.code & 0x0F;\r
\r
scsiDev.data[3] = transfer.lba >> 24;\r
scsiDev.data[4] = transfer.lba >> 16;\r
\r
// Additional bytes if there are errors to report\r
scsiDev.data[7] = 10; // additional length\r
- scsiDev.data[12] = scsiDev.sense.asc >> 8;\r
- scsiDev.data[13] = scsiDev.sense.asc;\r
+ scsiDev.data[12] = scsiDev.target->sense.asc >> 8;\r
+ scsiDev.data[13] = scsiDev.target->sense.asc;\r
\r
// Silently truncate results. SCSI-2 spec 8.2.14.\r
enter_DataIn(allocLength);\r
\r
// This is a good time to clear out old sense information.\r
- scsiDev.sense.code = NO_SENSE;\r
- scsiDev.sense.asc = NO_ADDITIONAL_SENSE_INFORMATION;\r
+ scsiDev.target->sense.code = NO_SENSE;\r
+ scsiDev.target->sense.asc = NO_ADDITIONAL_SENSE_INFORMATION;\r
}\r
// Some old SCSI drivers do NOT properly support\r
// unitAttention. eg. the Mac Plus would trigger a SCSI reset\r
// on receiving the unit attention response on boot, thus\r
// triggering another unit attention condition.\r
- else if (scsiDev.unitAttention && config->enableUnitAttention)\r
+ else if (scsiDev.target->unitAttention &&\r
+ (scsiDev.target->cfg->flags & CONFIG_ENABLE_UNIT_ATTENTION))\r
{\r
- scsiDev.sense.code = UNIT_ATTENTION;\r
- scsiDev.sense.asc = scsiDev.unitAttention;\r
+ scsiDev.target->sense.code = UNIT_ATTENTION;\r
+ scsiDev.target->sense.asc = scsiDev.target->unitAttention;\r
\r
// If initiator doesn't do REQUEST SENSE for the next command, then\r
// data is lost.\r
- scsiDev.unitAttention = 0;\r
+ scsiDev.target->unitAttention = 0;\r
\r
enter_Status(CHECK_CONDITION);\r
}\r
else if (scsiDev.lun)\r
{\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = LOGICAL_UNIT_NOT_SUPPORTED;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_NOT_SUPPORTED;\r
enter_Status(CHECK_CONDITION);\r
}\r
else if (command == 0x17 || command == 0x16)\r
{\r
doReserveRelease();\r
}\r
- else if ((scsiDev.reservedId >= 0) &&\r
- (scsiDev.reservedId != scsiDev.initiatorId))\r
+ else if ((scsiDev.target->reservedId >= 0) &&\r
+ (scsiDev.target->reservedId != scsiDev.initiatorId))\r
{\r
enter_Status(CONFLICT);\r
}\r
}\r
else if (\r
!scsiModeCommand() &&\r
- !scsiDiskCommand())\r
+ !scsiDiskCommand() &&\r
+ !scsiCDRomCommand())\r
{\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_COMMAND_OPERATION_CODE;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_COMMAND_OPERATION_CODE;\r
enter_Status(CHECK_CONDITION);\r
}\r
\r
uint8 command = scsiDev.cdb[0];\r
\r
int canRelease =\r
- (!thirdPty && (scsiDev.initiatorId == scsiDev.reservedId)) ||\r
+ (!thirdPty && (scsiDev.initiatorId == scsiDev.target->reservedId)) ||\r
(thirdPty &&\r
- (scsiDev.reserverId == scsiDev.initiatorId) &&\r
- (scsiDev.reservedId == thirdPtyId)\r
+ (scsiDev.target->reserverId == scsiDev.initiatorId) &&\r
+ (scsiDev.target->reservedId == thirdPtyId)\r
);\r
\r
if (extentReservation)\r
{\r
// Not supported.\r
- scsiDev.sense.code = ILLEGAL_REQUEST;\r
- scsiDev.sense.asc = INVALID_FIELD_IN_CDB;\r
+ scsiDev.target->sense.code = ILLEGAL_REQUEST;\r
+ scsiDev.target->sense.asc = INVALID_FIELD_IN_CDB;\r
enter_Status(CHECK_CONDITION);\r
}\r
else if (command == 0x17) // release\r
{\r
- if ((scsiDev.reservedId < 0) || canRelease)\r
+ if ((scsiDev.target->reservedId < 0) || canRelease)\r
{\r
- scsiDev.reservedId = -1;\r
- scsiDev.reserverId = -1;\r
+ scsiDev.target->reservedId = -1;\r
+ scsiDev.target->reserverId = -1;\r
}\r
else\r
{\r
}\r
else // assume reserve.\r
{\r
- if ((scsiDev.reservedId < 0) || canRelease)\r
+ if ((scsiDev.target->reservedId < 0) || canRelease)\r
{\r
- scsiDev.reserverId = scsiDev.initiatorId;\r
+ scsiDev.target->reserverId = scsiDev.initiatorId;\r
if (thirdPty)\r
{\r
- scsiDev.reservedId = thirdPtyId;\r
+ scsiDev.target->reservedId = thirdPtyId;\r
}\r
else\r
{\r
- scsiDev.reservedId = scsiDev.initiatorId;\r
+ scsiDev.target->reservedId = scsiDev.initiatorId;\r
}\r
}\r
else\r
scsiDev.resetFlag = 0;\r
scsiDev.lun = -1;\r
\r
- if (scsiDev.unitAttention != POWER_ON_RESET)\r
+ if (scsiDev.target)\r
{\r
- scsiDev.unitAttention = SCSI_BUS_RESET;\r
+ if (scsiDev.target->unitAttention != POWER_ON_RESET)\r
+ {\r
+ scsiDev.target->unitAttention = SCSI_BUS_RESET;\r
+ }\r
+ scsiDev.target->reservedId = -1;\r
+ scsiDev.target->reserverId = -1;\r
+ scsiDev.target->sense.code = NO_SENSE;\r
+ scsiDev.target->sense.asc = NO_ADDITIONAL_SENSE_INFORMATION;\r
}\r
- scsiDev.reservedId = -1;\r
- scsiDev.reserverId = -1;\r
- scsiDev.sense.code = NO_SENSE;\r
- scsiDev.sense.asc = NO_ADDITIONAL_SENSE_INFORMATION;\r
+ scsiDev.target = NULL;\r
scsiDiskReset();\r
\r
scsiDev.postDataOutHook = NULL;\r
scsiDev.discPriv = 0;\r
scsiDev.compatMode = 0;\r
\r
+ scsiDev.initiatorId = -1;\r
+ scsiDev.target = NULL;\r
+\r
transfer.blocks = 0;\r
transfer.currentBlock = 0;\r
\r
int goodParity = (Lookup_OddParity[mask] == SCSI_ReadPin(SCSI_In_DBP));\r
int atnFlag = SCSI_ReadFilt(SCSI_Filt_ATN);\r
\r
+ int tgtIndex;\r
+ TargetState* target = NULL;\r
+ for (tgtIndex = 0; tgtIndex < MAX_SCSI_TARGETS; ++tgtIndex)\r
+ {\r
+ if (mask & (1 << scsiDev.targets[tgtIndex].targetId))\r
+ {\r
+ target = &scsiDev.targets[tgtIndex];\r
+ break;\r
+ }\r
+ }\r
if (!bsy && sel &&\r
- (mask & scsiDev.scsiIdMask) &&\r
- (goodParity || !config->enableParity || !atnFlag) &&\r
+ target &&\r
+ (goodParity || !(target->cfg->flags & CONFIG_ENABLE_PARITY) || !atnFlag) &&\r
(maskBitCount <= 2))\r
{\r
+ scsiDev.target = target;\r
+\r
// Do we enter MESSAGE OUT immediately ? SCSI 1 and 2 standards says\r
// move to MESSAGE OUT if ATN is true before we assert BSY.\r
// The initiator should assert ATN with SEL.\r
// controllers don't generate parity bits.\r
if (!scsiDev.atnFlag)\r
{\r
- scsiDev.unitAttention = 0;\r
+ target->unitAttention = 0;\r
scsiDev.compatMode = 1;\r
}\r
\r
// Save our initiator now that we're no longer in a time-critical\r
// section.\r
// SCSI1/SASI initiators may not set their own ID.\r
- if (maskBitCount == 2)\r
{\r
int i;\r
- uint8 initiatorMask = mask ^ scsiDev.scsiIdMask;\r
- scsiDev.initiatorId = 0;\r
+ uint8_t initiatorMask = mask ^ (1 << target->targetId);\r
+ scsiDev.initiatorId = -1;\r
for (i = 0; i < 8; ++i)\r
{\r
if (initiatorMask & (1 << i))\r
}\r
}\r
}\r
- else\r
- {\r
- scsiDev.initiatorId = -1;\r
- }\r
\r
scsiDev.phase = COMMAND;\r
}\r
scsiDev.msgOut = scsiReadByte();\r
scsiDev.msgCount++;\r
\r
- if (scsiDev.parityError && config->enableParity && !scsiDev.compatMode)\r
+ if (scsiDev.parityError &&\r
+ (scsiDev.target->cfg->flags & CONFIG_ENABLE_PARITY) &&\r
+ !scsiDev.compatMode)\r
{\r
// Skip the remaining message bytes, and then start the MESSAGE_OUT\r
// phase again from the start. The initiator will re-send the\r
\r
scsiDiskReset();\r
\r
- scsiDev.unitAttention = SCSI_BUS_RESET;\r
+ scsiDev.target->unitAttention = SCSI_BUS_RESET;\r
\r
// ANY initiator can reset the reservation state via this message.\r
- scsiDev.reservedId = -1;\r
- scsiDev.reserverId = -1;\r
+ scsiDev.target->reservedId = -1;\r
+ scsiDev.target->reserverId = -1;\r
enter_BusFree();\r
}\r
else if (scsiDev.msgOut == 0x05)\r
\r
void scsiInit()\r
{\r
- scsiDev.scsiIdMask = 1 << (config->scsiId);\r
-\r
scsiDev.atnFlag = 0;\r
scsiDev.resetFlag = 1;\r
scsiDev.phase = BUS_FREE;\r
- scsiDev.reservedId = -1;\r
- scsiDev.reserverId = -1;\r
- scsiDev.unitAttention = POWER_ON_RESET;\r
+ scsiDev.target = NULL;\r
+\r
+ int i;\r
+ for (i = 0; i < MAX_SCSI_TARGETS; ++i)\r
+ {\r
+ const TargetConfig* cfg = getConfigByIndex(i);\r
+ if (cfg && (cfg->scsiId & CONFIG_TARGET_ENABLED))\r
+ {\r
+ scsiDev.targets[i].targetId = cfg->scsiId & CONFIG_TARGET_ID_BITS;\r
+ scsiDev.targets[i].cfg = cfg;\r
+ }\r
+ else\r
+ {\r
+ scsiDev.targets[i].targetId = 0xff;\r
+ scsiDev.targets[i].cfg = NULL;\r
+ }\r
+ scsiDev.targets[i].reservedId = -1;\r
+ scsiDev.targets[i].reserverId = -1;\r
+ scsiDev.targets[i].unitAttention = POWER_ON_RESET;\r
+ scsiDev.targets[i].sense.code = NO_SENSE;\r
+ scsiDev.targets[i].sense.asc = NO_ADDITIONAL_SENSE_INFORMATION;\r
+ }\r
}\r
\r
void scsiDisconnect()\r
{\r
// Arbitrate.\r
ledOn();\r
- SCSI_Out_Bits_Write(scsiDev.scsiIdMask);\r
+ uint8_t scsiIdMask = 1 << scsiDev.target->targetId;\r
+ SCSI_Out_Bits_Write(scsiIdMask);\r
SCSI_Out_Ctl_Write(1); // Write bits manually.\r
SCSI_SetPin(SCSI_Out_BSY);\r
\r
\r
uint8_t dbx = scsiReadDBxPins();\r
sel = SCSI_ReadFilt(SCSI_Filt_SEL);\r
- if (sel || ((dbx ^ scsiDev.scsiIdMask) > scsiDev.scsiIdMask))\r
+ if (sel || ((dbx ^ scsiIdMask) > scsiIdMask))\r
{\r
// Lost arbitration.\r
SCSI_Out_Ctl_Write(0);\r
\r
// Reselection phase\r
SCSI_CTL_PHASE_Write(__scsiphase_io);\r
- SCSI_Out_Bits_Write(scsiDev.scsiIdMask | (1 << scsiDev.initiatorId));\r
+ SCSI_Out_Bits_Write(scsiIdMask | (1 << scsiDev.initiatorId));\r
scsiDeskewDelay(); // 2 deskew delays\r
scsiDeskewDelay(); // 2 deskew delays\r
SCSI_ClearPin(SCSI_Out_BSY);\r
typedef struct
{
- uint8_t scsiIdMask;
+ uint8_t targetId;
+ const TargetConfig* cfg;
+
+ ScsiSense sense;
+
+ uint16 unitAttention; // Set to the sense qualifier key to be returned.
+
+ // Only let the reserved initiator talk to us.
+ // A 3rd party may be sending the RESERVE/RELEASE commands
+ int reservedId; // 0 -> 7 if reserved. -1 if not reserved.
+ int reserverId; // 0 -> 7 if reserved. -1 if not reserved.
+} TargetState;
+
+typedef struct
+{
+ TargetState targets[MAX_SCSI_TARGETS];
+ TargetState* target;
// Set to true (1) if the ATN flag was set, and we need to
// enter the MESSAGE_OUT phase.
// Only let the reserved initiator talk to us.
// A 3rd party may be sending the RESERVE/RELEASE commands
int initiatorId; // 0 -> 7. Set during the selection phase.
- int reservedId; // 0 -> 7 if reserved. -1 if not reserved.
- int reserverId; // 0 -> 7 if reserved. -1 if not reserved.
// SCSI_STATUS value.
// Change to CHECK_CONDITION when setting a SENSE value
uint8 status;
- ScsiSense sense;
-
- uint16 unitAttention; // Set to the sense qualifier key to be returned.
-
uint8 msgIn;
uint8 msgOut;
{\r
uint8 v;\r
uint32 scsiLBA = (transfer.lba + transfer.currentBlock);\r
- uint32 sdLBA = SCSISector2SD(scsiLBA);\r
+ uint32 sdLBA = SCSISector2SD(scsiDev.target->cfg, scsiLBA);\r
\r
if (!sdDev.ccs)\r
{\r
sdClearStatus();\r
\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
if (scsiDev.status != CHECK_CONDITION)\r
{\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = UNRECOVERED_READ_ERROR;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR;\r
scsiDev.phase = STATUS;\r
}\r
return;\r
sdClearStatus();\r
\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
}\r
\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = UNRECOVERED_READ_ERROR;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = UNRECOVERED_READ_ERROR;\r
scsiDev.phase = STATUS;\r
}\r
\r
sdClearStatus();\r
\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
{\r
sdClearStatus();\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = WRITE_ERROR_AUTO_REALLOCATION_FAILED;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = WRITE_ERROR_AUTO_REALLOCATION_FAILED;\r
scsiDev.phase = STATUS;\r
}\r
}\r
// We don't care about the response - if the command is not accepted, writes\r
// will just be a bit slower.\r
// Max 22bit parameter.\r
- uint32_t sdBlocks = transfer.blocks * SDSectorsPerSCSISector();\r
+ uint32_t sdBlocks =\r
+ transfer.blocks * SDSectorsPerSCSISector(scsiDev.target->cfg);\r
uint32 blocks = sdBlocks > 0x7FFFFF ? 0x7FFFFF : sdBlocks;\r
sdCommandAndResponse(SD_APP_CMD, 0);\r
sdCommandAndResponse(SD_APP_SET_WR_BLK_ERASE_COUNT, blocks);\r
\r
uint32 scsiLBA = (transfer.lba + transfer.currentBlock);\r
- uint32 sdLBA = SCSISector2SD(scsiLBA);\r
+ uint32 sdLBA = SCSISector2SD(scsiDev.target->cfg, scsiLBA);\r
if (!sdDev.ccs)\r
{\r
sdLBA = sdLBA * SD_SECTOR_SIZE;\r
scsiDiskReset();\r
sdClearStatus();\r
scsiDev.status = CHECK_CONDITION;\r
- scsiDev.sense.code = HARDWARE_ERROR;\r
- scsiDev.sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
+ scsiDev.target->sense.code = HARDWARE_ERROR;\r
+ scsiDev.target->sense.asc = LOGICAL_UNIT_COMMUNICATION_FAILURE;\r
scsiDev.phase = STATUS;\r
}\r
else\r
<Toolchain Name="ARM GCC" Selected="True">
<Tool Name="prebuild" Command="" Options="" />
<Tool Name="assembler" Command="arm-none-eabi-as.exe" Options="-I. -I./Generated_Source/PSoC5 -mcpu=cortex-m3 -mthumb -g -alh=${OutputDir}/${CompileFile}.lst " />
- <Tool Name="compiler" Command="arm-none-eabi-gcc.exe" Options="-I. -I./Generated_Source/PSoC5 -Wno-main -mcpu=cortex-m3 -mthumb -Wall -g -D NDEBUG -Wa,-alh=${OutputDir}\${CompileFile}.lst -Os -ffunction-sections " />
+ <Tool Name="compiler" Command="arm-none-eabi-gcc.exe" Options="-I. -I./Generated_Source/PSoC5 -Wno-main -mcpu=cortex-m3 -mthumb -I ../../../include -Wall -g -D NDEBUG -Wa,-alh=${OutputDir}\${CompileFile}.lst -Os -ffunction-sections " />
<Tool Name="linker" Command="arm-none-eabi-gcc.exe" Options="-mthumb -march=armv7-m -mfix-cortex-m3-ldrd -T .\Generated_Source\PSoC5\cm3gcc.ld -g -Wl,-Map,${OutputDir}\${ProjectShortName}.map -specs=nano.specs -Wl,--gc-sections " />
<Tool Name="postbuild" Command="" Options="" />
</Toolchain>
<Tool Name="postbuild" Command="" Options="" />
</Toolchain>
</Toolchains>
- <Project Name="SCSI2SD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" Version="4.0" Type="Bootloadable">
+ <Project Name="SCSI2SD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" Version="4.0" Type="Bootloadable">
<CMSIS_SVD_File>SCSI2SD.svd</CMSIS_SVD_File>
<Datasheet />
<LinkerFiles>
<LinkerFile Toolchain="IAR EWARM">.\Generated_Source\PSoC5\Cm3Iar.icf</LinkerFile>
</LinkerFiles>
<Folders>
- <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\src">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\src">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">..\..\src\main.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\diagnostic.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\disk.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\config.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\led.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\time.c</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\hidpacket.c</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\cdrom.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\diagnostic.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\disk.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\geometry.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\sd.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\config.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\time.h</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\cdrom.h</File>
</Files>
</Folder>
- <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">.\device.h</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\include">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <File BuildType="BUILD" Toolchain="">..\..\..\include\hidpacket.h</File>
+ <File BuildType="BUILD" Toolchain="">..\..\..\include\scsi2sd.h</File>
+ </Files>
+ </Folder>
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.h</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.c</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cydevice.h</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\libelf.dll</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_GCC">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_GCC">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="ARM GCC">.\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="ARM Keil MDK">.\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\IAR">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn\Generated_Source\PSoC5\IAR">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="IAR">.\Generated_Source\PSoC5\IAR\CyComponentLibrary.a</File>
</Files>
</Folder>
<Folder BuildType="EXCLUDE" Path=".\codegentemp">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_441">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_473">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\DP8051_Keil_951">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\DP8051">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\CortexM0">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\CortexM3">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\SCSI2SD.cydsn" />
</Folder>
</Folders>
</Project>
<build_action v="C_FILE" />\r
<PropertyDeltas />\r
</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">\r
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="hidpacket.c" persistent="..\..\src\hidpacket.c">\r
+<Hidden v="False" />\r
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>\r
+<build_action v="C_FILE" />\r
+<PropertyDeltas />\r
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">\r
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="cdrom.c" persistent="..\..\src\cdrom.c">\r
+<Hidden v="False" />\r
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>\r
+<build_action v="C_FILE" />\r
+<PropertyDeltas />\r
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
</dependencies>\r
</CyGuid_0820c2e7-528d-4137-9a08-97257b946089>\r
</CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>\r
<build_action v="NONE" />\r
<PropertyDeltas />\r
</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">\r
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="hidpacket.h" persistent="..\..\..\include\hidpacket.h">\r
+<Hidden v="False" />\r
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>\r
+<build_action v="NONE" />\r
+<PropertyDeltas />\r
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">\r
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="scsi2sd.h" persistent="..\..\..\include\scsi2sd.h">\r
+<Hidden v="False" />\r
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>\r
+<build_action v="NONE" />\r
+<PropertyDeltas />\r
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">\r
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="cdrom.h" persistent="..\..\src\cdrom.h">\r
+<Hidden v="False" />\r
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>\r
+<build_action v="NONE" />\r
+<PropertyDeltas />\r
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>\r
</dependencies>\r
</CyGuid_0820c2e7-528d-4137-9a08-97257b946089>\r
</CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM0@Linker@Command Line@Command Line" v="" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM0@Library Generation@Command Line@Command Line" v="" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@General@Output Directory" v="${ProjectDir}\${ProcessorType}\${Platform}\${Config}" />\r
-<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@C/C++@General@Additional Include Directories" v="" />\r
+<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@C/C++@General@Additional Include Directories" v="../../../include" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@C/C++@General@Warnings as Errors" v="False" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@C/C++@General@Warning Level" v="High" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@C/C++@General@Pedantic Compilation" v="False" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@Linker@Command Line@Command Line" v="" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Debug@CortexM3@Library Generation@Command Line@Command Line" v="" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@General@Output Directory" v="${ProjectDir}\${ProcessorType}\${Platform}\${Config}" />\r
-<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@C/C++@General@Additional Include Directories" v="" />\r
+<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@C/C++@General@Additional Include Directories" v="../../../include" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@C/C++@General@Warnings as Errors" v="False" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@C/C++@General@Warning Level" v="High" />\r
<name_val_pair name="b98f980c-3bd1-4fc7-a887-c56a20a46fdd@Release@CortexM3@C/C++@General@Pedantic Compilation" v="False" />\r
<Tool Name="postbuild" Command="" Options="" />\r
</Toolchain>\r
</Toolchains>\r
- <Project Name="USB_Bootloader" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" Version="4.0" Type="Bootloader">\r
+ <Project Name="USB_Bootloader" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" Version="4.0" Type="Bootloader">\r
<CMSIS_SVD_File>USB_Bootloader.svd</CMSIS_SVD_File>\r
<Datasheet />\r
<LinkerFiles>\r
<LinkerFile Toolchain="IAR EWARM">.\Generated_Source\PSoC5\Cm3Iar.icf</LinkerFile>\r
</LinkerFiles>\r
<Folders>\r
- <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
<File BuildType="BUILD" Toolchain="">.\main.c</File>\r
</Files>\r
</Folder>\r
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5">\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.h</File>\r
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.c</File>\r
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cymetadata.c</File>\r
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\libelf.dll</File>\r
</Files>\r
</Folder>\r
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\ARM_GCC">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\ARM_GCC">\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
<File BuildType="BUILD" Toolchain="ARM GCC">.\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a</File>\r
</Files>\r
</Folder>\r
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
<File BuildType="BUILD" Toolchain="ARM Keil MDK">.\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a</File>\r
</Files>\r
</Folder>\r
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\IAR">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5\IAR">\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn">\r
<File BuildType="BUILD" Toolchain="IAR">.\Generated_Source\PSoC5\IAR\CyComponentLibrary.a</File>\r
</Files>\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\codegentemp">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_441">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_473">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\DP8051_Keil_951">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\DP8051">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\CortexM0">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
<Folder BuildType="EXCLUDE" Path=".\CortexM3">\r
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn" />\r
</Folder>\r
</Folders>\r
</Project>\r
<name_val_pair name="W:\SCSI2SD\software\SCSI2SD\USB_Bootloader.cydsn\CortexM3\ARM_GCC_473\Debug\USB_Bootloader.hex" v=""-mthumb ""-march=armv7-m ""-mfix-cortex-m3-ldrd ""-T "".\Generated_Source\PSoC5\cm3gcc.ld ""-g ""-Wl,-Map,${OutputDir}\${ProjectShortName}.map ""-specs=nano.specs ""-Wl,--gc-sections "" />\r
</name>\r
</genericCmdLineData>\r
-<codeGenCmdLineTag v=""-.appdatapath" "C:\Users\Micha_000\AppData\Local\Cypress Semiconductor\PSoC Creator\3.0" "-.fdsnotice" "-.fdswarpdepfile=warp_dependencies.txt" "-.fdselabdepfile=elab_dependencies.txt" "-.fdsbldfile=generated_files.txt" "-p" "Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\USB_Bootloader.cyprj" "-d" "CY8C5267AXI-LP051" "-s" "Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5" "--" "-yv2" "-v3" "-ygs" "-q10" "-o2" "-.fftcfgtype=LE" " />\r
+<codeGenCmdLineTag v=""-.appdatapath" "C:\Users\Micha_000\AppData\Local\Cypress Semiconductor\PSoC Creator\3.0" "-.fdsnotice" "-.fdswarpdepfile=warp_dependencies.txt" "-.fdselabdepfile=elab_dependencies.txt" "-.fdsbldfile=generated_files.txt" "-p" "Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\USB_Bootloader.cyprj" "-d" "CY8C5267AXI-LP051" "-s" "Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v3\USB_Bootloader.cydsn\Generated_Source\PSoC5" "--" "-yv2" "-v3" "-ygs" "-q10" "-o2" "-.fftcfgtype=LE" " />\r
</CyGuid_b0374e30-ce3a-47f2-ad85-821643292c68>\r
</dataGuid>\r
<dataGuid v="597c5b74-0c46-4204-8b7f-96f3570671dc">\r
<v>C:\Program Files (x86)\Cypress\PSoC Creator\3.0\PSoC Creator\warp\lib\common\stdlogic\mod_genv.vif</v>\r
<v>C:\Program Files (x86)\Cypress\PSoC Creator\3.0\PSoC Creator\warp\lib\common\stdlogic\rtlpkg.vif</v>\r
</warp_dep>\r
-<deps_time v="130571566842994698" />\r
+<deps_time v="130621702845187692" />\r
<top_block v="TopDesign" />\r
<last_generation v="0" />\r
</CyGuid_925cc1e1-309e-4e08-b0a1-09a83c35b157>\r
</dataGuid>\r
<dataGuid v="769d31ea-68b1-4f0c-b90a-7c10a43ee563">\r
<CyGuid_769d31ea-68b1-4f0c-b90a-7c10a43ee563 type_name="CyDesigner.Common.ProjMgmt.Model.CyLinkCustomData" version="1">\r
-<deps_time v="130571567839248780" />\r
+<deps_time v="130621704041554601" />\r
</CyGuid_769d31ea-68b1-4f0c-b90a-7c10a43ee563>\r
</dataGuid>\r
<dataGuid v="bf610382-39c6-441f-80b8-b04622ea7845">\r
<Toolchain Name="ARM GCC" Selected="True">
<Tool Name="prebuild" Command="" Options="" />
<Tool Name="assembler" Command="arm-none-eabi-as.exe" Options="-I. -I./Generated_Source/PSoC5 -mcpu=cortex-m3 -mthumb -g -alh=${OutputDir}/${CompileFile}.lst " />
- <Tool Name="compiler" Command="arm-none-eabi-gcc.exe" Options="-I. -I./Generated_Source/PSoC5 -Wno-main -mcpu=cortex-m3 -mthumb -Wall -g -D NDEBUG -Wa,-alh=${OutputDir}\${CompileFile}.lst -Os -ffunction-sections " />
+ <Tool Name="compiler" Command="arm-none-eabi-gcc.exe" Options="-I. -I./Generated_Source/PSoC5 -Wno-main -mcpu=cortex-m3 -mthumb -I ../../../include -Wall -g -D NDEBUG -Wa,-alh=${OutputDir}\${CompileFile}.lst -Os -ffunction-sections " />
<Tool Name="linker" Command="arm-none-eabi-gcc.exe" Options="-mthumb -march=armv7-m -mfix-cortex-m3-ldrd -T .\Generated_Source\PSoC5\cm3gcc.ld -g -Wl,-Map,${OutputDir}\${ProjectShortName}.map -specs=nano.specs -Wl,--gc-sections " />
<Tool Name="postbuild" Command="" Options="" />
</Toolchain>
<Tool Name="postbuild" Command="" Options="" />
</Toolchain>
</Toolchains>
- <Project Name="SCSI2SD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" Version="4.0" Type="Bootloadable">
+ <Project Name="SCSI2SD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" Version="4.0" Type="Bootloadable">
<CMSIS_SVD_File>SCSI2SD.svd</CMSIS_SVD_File>
<Datasheet />
<LinkerFiles>
<LinkerFile Toolchain="IAR EWARM">.\Generated_Source\PSoC5\Cm3Iar.icf</LinkerFile>
</LinkerFiles>
<Folders>
- <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\src">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\src">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">..\..\src\main.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\diagnostic.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\disk.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\config.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\led.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\time.c</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\hidpacket.c</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\cdrom.c</File>
<File BuildType="BUILD" Toolchain="">..\..\src\diagnostic.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\disk.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\geometry.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\sd.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\config.h</File>
<File BuildType="BUILD" Toolchain="">..\..\src\time.h</File>
+ <File BuildType="BUILD" Toolchain="">..\..\src\cdrom.h</File>
</Files>
</Folder>
- <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">.\device.h</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="BUILD" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\include">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <File BuildType="BUILD" Toolchain="">..\..\..\include\scsi2sd.h</File>
+ <File BuildType="BUILD" Toolchain="">..\..\..\include\hidpacket.h</File>
+ </Files>
+ </Folder>
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.h</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cyfitter_cfg.c</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\cybootloader.c</File>
<File BuildType="BUILD" Toolchain="">.\Generated_Source\PSoC5\libelf.dll</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_GCC">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_GCC">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="ARM GCC">.\Generated_Source\PSoC5\ARM_GCC\CyComponentLibrary.a</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\ARM_Keil_MDK">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="ARM Keil MDK">.\Generated_Source\PSoC5\ARM_Keil_MDK\CyComponentLibrary.a</File>
</Files>
</Folder>
- <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\IAR">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
+ <Folder BuildType="STRICT" Path="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn\Generated_Source\PSoC5\IAR">
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn">
<File BuildType="BUILD" Toolchain="IAR">.\Generated_Source\PSoC5\IAR\CyComponentLibrary.a</File>
</Files>
</Folder>
<Folder BuildType="EXCLUDE" Path=".\codegentemp">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_441">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\ARM_GCC_473">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\DP8051_Keil_951">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\DP8051">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\CortexM0">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
<Folder BuildType="EXCLUDE" Path=".\CortexM3">
- <Files Root="Z:\projects\SCSI2SD\git-timeout\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
+ <Files Root="Z:\projects\SCSI2SD\git\SCSI2SD\software\SCSI2SD\v4\SCSI2SD.cydsn" />
</Folder>
</Folders>
</Project>
<build_action v="C_FILE" />
<PropertyDeltas />
</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="hidpacket.c" persistent="..\..\src\hidpacket.c">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="C_FILE" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="cdrom.c" persistent="..\..\src\cdrom.c">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="C_FILE" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
</dependencies>
</CyGuid_0820c2e7-528d-4137-9a08-97257b946089>
</CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>
<build_action v="NONE" />
<PropertyDeltas />
</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="scsi2sd.h" persistent="..\..\..\include\scsi2sd.h">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="NONE" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="hidpacket.h" persistent="..\..\..\include\hidpacket.h">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="NONE" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
+<CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtFile" version="3" xml_contents_version="1">
+<CyGuid_31768f72-0253-412b-af77-e7dba74d1330 type_name="CyDesigner.Common.ProjMgmt.Model.CyPrjMgmtItem" version="2" name="cdrom.h" persistent="..\..\src\cdrom.h">
+<Hidden v="False" />
+</CyGuid_31768f72-0253-412b-af77-e7dba74d1330>
+<build_action v="NONE" />
+<PropertyDeltas />
+</CyGuid_8b8ab257-35d3-4473-b57b-36315200b38b>
</dependencies>
</CyGuid_0820c2e7-528d-4137-9a08-97257b946089>
</CyGuid_2f73275c-45bf-46ba-b3b1-00a2fe0c8dd8>
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM0@Linker@Command Line@Command Line" v="" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM0@Library Generation@Command Line@Command Line" v="" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@General@Output Directory" v="${ProjectDir}\${ProcessorType}\${Platform}\${Config}" />
-<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@C/C++@General@Additional Include Directories" v="" />
+<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@C/C++@General@Additional Include Directories" v="../../../include" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@C/C++@General@Warnings as Errors" v="False" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@C/C++@General@Warning Level" v="High" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@C/C++@General@Pedantic Compilation" v="False" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@Linker@Command Line@Command Line" v="" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Debug@CortexM3@Library Generation@Command Line@Command Line" v="" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@General@Output Directory" v="${ProjectDir}\${ProcessorType}\${Platform}\${Config}" />
-<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@C/C++@General@Additional Include Directories" v="" />
+<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@C/C++@General@Additional Include Directories" v="../../../include" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@C/C++@General@Warnings as Errors" v="False" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@C/C++@General@Warning Level" v="High" />
<name_val_pair name="c9323d49-d323-40b8-9b59-cc008d68a989@Release@CortexM3@C/C++@General@Pedantic Compilation" v="False" />
<BootloaderTag hexFile="" elfFile="" />
<current_generation v="2" />
</CyGuid_fec8f9e8-2365-4bdb-96d3-a4380222e01b>
-</CyXmlSerializer>
\ No newline at end of file
+</CyXmlSerializer>
# Builds all of the utilities (not firmware) under Linux.
# Requires mingw installed to cross-compile Windows targets.
- (cd bootloaderhost && ./build.sh) &&
- (cd scsi2sd-config && ./build.sh) &&
+ (cd scsi2sd-util && ./build.sh) &&
(cd scsi2sd-debug && ./build.sh)
if [ $? -eq 0 ]; then
mkdir -p build/windows/64bit
mkdir -p build/windows/32bit
- cp bootloaderhost/build/linux/bootloaderhost build/linux
- cp scsi2sd-config/build/linux/scsi2sd-config build/linux
+ cp scsi2sd-util/build/linux/scsi2sd-util build/linux
cp scsi2sd-debug/build/linux/scsi2sd-debug build/linux
- cp bootloaderhost/build/windows/32bit/bootloaderhost.exe build/windows/32bit
- cp scsi2sd-config/build/windows/32bit/scsi2sd-config.exe build/windows/32bit
+ cp scsi2sd-util/build/windows/32bit/scsi2sd-util.exe build/windows/32bit
cp scsi2sd-debug/build/windows/32bit/scsi2sd-debug.exe build/windows/32bit
- cp bootloaderhost/build/windows/64bit/bootloaderhost.exe build/windows/64bit
- cp scsi2sd-config/build/windows/64bit/scsi2sd-config.exe build/windows/64bit
+ cp scsi2sd-util/build/windows/64bit/scsi2sd-util.exe build/windows/64bit
cp scsi2sd-debug/build/windows/64bit/scsi2sd-debug.exe build/windows/64bit
fi
;;
Darwin)
- make -C bootloaderhost &&
- make -C scsi2sd-config &&
+ make -C scsi2sd-util &&
make -C scsi2sd-debug
if [ $? -eq 0 ]; then
mkdir -p build/mac
- cp bootloaderhost/build/mac/bootloaderhost build/mac
- cp scsi2sd-config/build/mac/scsi2sd-config build/mac
+ cp scsi2sd-util/build/mac/scsi2sd-util build/mac
cp scsi2sd-debug/build/mac/scsi2sd-debug build/mac
fi
#include <limits>
#include <string.h>
-#include <arpa/inet.h>
using namespace SCSI2SD;
+namespace
+{
+ // Endian conversion routines.
+ // The Cortex-M3 inside the Cypress PSoC 5LP is a
+ // little-endian device.
+
+ bool isHostLE()
+ {
+ union
+ {
+ int i;
+ char c[sizeof(int)];
+ } x;
+ x.i = 1;
+ return (x.c[0] == 1);
+ }
+
+ uint16_t toLE16(uint16_t in)
+ {
+ if (isHostLE())
+ {
+ return in;
+ }
+ else
+ {
+ return (in >> 8) | (in << 8);
+ }
+ }
+ uint16_t fromLE16(uint16_t in)
+ {
+ return toLE16(in);
+ }
+
+ uint32_t toLE32(uint32_t in)
+ {
+ if (isHostLE())
+ {
+ return in;
+ }
+ else
+ {
+ return (in >> 24) |
+ ((in >> 8) & 0xff00) |
+ ((in << 8) & 0xff0000) |
+ (in << 24);
+ }
+ }
+ uint32_t fromLE32(uint32_t in)
+ {
+ return toLE32(in);
+ }
+
+}
+
TargetConfig
ConfigUtil::Default(size_t targetIdx)
{
{
TargetConfig result;
memcpy(&result, data, sizeof(TargetConfig));
- result.sdSectorStart = ntohl(result.sdSectorStart);
- result.scsiSectors = ntohl(result.scsiSectors);
- result.bytesPerSector = ntohs(result.bytesPerSector);
- result.sectorsPerTrack = ntohs(result.sectorsPerTrack);
- result.headsPerCylinder = ntohs(result.headsPerCylinder);
+ result.sdSectorStart = toLE32(result.sdSectorStart);
+ result.scsiSectors = toLE32(result.scsiSectors);
+ result.bytesPerSector = toLE16(result.bytesPerSector);
+ result.sectorsPerTrack = toLE16(result.sectorsPerTrack);
+ result.headsPerCylinder = toLE16(result.headsPerCylinder);
return result;
}
ConfigUtil::toBytes(const TargetConfig& _config)
{
TargetConfig config(_config);
- config.sdSectorStart = htonl(config.sdSectorStart);
- config.scsiSectors = htonl(config.scsiSectors);
- config.bytesPerSector = htons(config.bytesPerSector);
- config.sectorsPerTrack = htons(config.sectorsPerTrack);
- config.headsPerCylinder = htons(config.headsPerCylinder);
+ config.sdSectorStart = fromLE32(config.sdSectorStart);
+ config.scsiSectors = fromLE32(config.scsiSectors);
+ config.bytesPerSector = fromLE16(config.bytesPerSector);
+ config.sectorsPerTrack = fromLE16(config.sectorsPerTrack);
+ config.headsPerCylinder = fromLE16(config.headsPerCylinder);
const uint8_t* begin = reinterpret_cast<const uint8_t*>(&config);
return std::vector<uint8_t>(begin, begin + sizeof(config));
VPATH=cybootloaderutils ../SCSI2SD/src
-CPPFLAGS = -I cybootloaderutils -I hidapi/hidapi -I wxWidgets/include -I ../include
+CPPFLAGS = -I cybootloaderutils -I hidapi/hidapi -I wxWidgets/include -I ../include -Ilibzipper-1.0.3 -I$(BUILD)/zlib
CFLAGS += -Wall -Wno-pointer-sign -O2 -g
CXXFLAGS += -Wall -O2 -g -std=c++0x
+LDFLAGS += -L$(BUILD)/libzipper/.libs -lzipper -L$(BUILD)/zlib -lz
TARGET ?= $(shell uname -s)
ifeq ($(TARGET),Win32)
$(BUILD)/hidpacket.o \
+$(OBJ): $(BUILD)/zlib/buildstamp
+$(BUILD)/zlib/buildstamp:
+ mkdir -p $(dir $@)
+ ( \
+ cd $(dir $@) && \
+ cp -a $(CURDIR)/zlib-1.2.8/* . && \
+ ./configure --static && \
+ $(MAKE) \
+ ) && \
+ touch $@
+
$(OBJ): $(BUILD)/wx.buildstamp
-$(BUILD)/wx.buildstamp:
+$(BUILD)/wx.buildstamp: $(BUILD)/zlib/buildstamp
mkdir -p $(dir $@)
( \
cd $(BUILD) && \
- $(CURDIR)/wxWidgets/configure $(WX_CONFIG) && \
+ $(CURDIR)/wxWidgets/configure $(WX_CONFIG) CPPFLAGS=-I$(BUILD)/zlib LDFLAGS=-I$(BUILD)/zlib && \
+ $(MAKE) \
+ ) && \
+ touch $@
+
+$(OBJ): $(BUILD)/libzipper/buildstamp
+$(BUILD)/libzipper/buildstamp:
+ mkdir -p $(dir $@)
+ ( \
+ cd $(dir $@) && \
+ $(CURDIR)/libzipper-1.0.3/configure --disable-shared --enable-static && \
$(MAKE) \
) && \
touch $@
$(CXX) $(CXXFLAGS) $^ $(LDFLAGS) `$(BUILD)/wx-config --libs` -o $@
clean:
- rm $(BUILD)/scsi2sd-util$(EXE) $(OBJ)
+ rm $(BUILD)/scsi2sd-util$(EXE) $(OBJ) $(BUILD)/libzipper/buildstamp
myNumSectorValidator(new wxIntegerValidator<uint32_t>),
mySizeValidator(new wxFloatingPointValidator<float>(2))
{
- wxFlexGridSizer *fgs = new wxFlexGridSizer(12, 3, 9, 25);
+ wxFlexGridSizer *fgs = new wxFlexGridSizer(13, 3, 9, 25);
fgs->Add(new wxStaticText(this, wxID_ANY, wxT("")));
myEnableCtrl =
fgs->Add(myScsiIdMsg);
Bind(wxEVT_SPINCTRL, &TargetPanel::onInput<wxSpinEvent>, this, ID_scsiIdCtrl);
+ fgs->Add(new wxStaticText(this, wxID_ANY, wxT("Device Type")));
+ wxString deviceTypes[] = {wxT("Hard Drive"), wxT("Removable"), wxT("CDROM")};
+ myDeviceTypeCtrl =
+ new wxChoice(
+ this,
+ ID_deviceTypeCtrl,
+ wxDefaultPosition,
+ wxDefaultSize,
+ sizeof(deviceTypes) / sizeof(wxString),
+ deviceTypes
+ );
+ myDeviceTypeCtrl->SetSelection(0);
+ fgs->Add(myDeviceTypeCtrl);
+ fgs->Add(new wxStaticText(this, wxID_ANY, wxT("")));
+ Bind(wxEVT_CHOICE, &TargetPanel::onInput<wxCommandEvent>, this, ID_deviceTypeCtrl);
+
fgs->Add(new wxStaticText(this, wxID_ANY, wxT("")));
myParityCtrl =
new wxCheckBox(
mySizeCtrl->SetToolTip(wxT("Device size"));
sizeContainer->Add(mySizeCtrl);
wxString units[] = {wxT("KB"), wxT("MB"), wxT("GB")};
- mySizeUnitCtrl =
+ mySizeUnitCtrl =
new wxChoice(
this,
ID_sizeUnitCtrl,
bool enabled = myEnableCtrl->IsChecked();
{
myScsiIdCtrl->Enable(enabled);
+ myDeviceTypeCtrl->Enable(enabled);
myParityCtrl->Enable(enabled);
myUnitAttCtrl->Enable(enabled);
myStartSDSectorCtrl->Enable(enabled);
config.scsiId = config.scsiId | CONFIG_TARGET_ENABLED;
}
+ config.deviceType = myDeviceTypeCtrl->GetSelection();
+
config.flags =
(myParityCtrl->IsChecked() ? CONFIG_ENABLE_PARITY : 0) |
(myUnitAttCtrl->IsChecked() ? CONFIG_ENABLE_UNIT_ATTENTION : 0);
myScsiIdCtrl->SetValue(config.scsiId & CONFIG_TARGET_ID_BITS);
myEnableCtrl->SetValue(config.scsiId & CONFIG_TARGET_ENABLED);
+ myDeviceTypeCtrl->SetSelection(config.deviceType);
+
myParityCtrl->SetValue(config.flags & CONFIG_ENABLE_PARITY);
myUnitAttCtrl->SetValue(config.flags & CONFIG_ENABLE_UNIT_ATTENTION);
{
ID_enableCtrl = wxID_HIGHEST + 1,
ID_scsiIdCtrl,
+ ID_deviceTypeCtrl,
ID_parityCtrl,
ID_unitAttCtrl,
ID_startSDSectorCtrl,
wxSpinCtrl* myScsiIdCtrl;
wxStaticText* myScsiIdMsg;
+ wxChoice* myDeviceTypeCtrl;
+
wxCheckBox* myParityCtrl;
wxCheckBox* myUnitAttCtrl;
--- /dev/null
+#!/bin/sh
+
+rm -rf build/
+make && \
+ make TARGET=Win32 &&
+ make TARGET=Win64
+
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+ The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users. We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors. You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+ To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+ Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+ For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+ Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so. This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software. The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable. Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products. If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+ Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary. To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ TERMS AND CONDITIONS
+
+ 0. Definitions.
+
+ "This License" refers to version 3 of the GNU General Public License.
+
+ "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+ "The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+ To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy. The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+ A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+ To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+ To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+ An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+ 1. Source Code.
+
+ The "source code" for a work means the preferred form of the work
+for making modifications to it. "Object code" means any non-source
+form of a work.
+
+ A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+ The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+ The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+ The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+ The Corresponding Source for a work in source code form is that
+same work.
+
+ 2. Basic Permissions.
+
+ All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+ You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force. You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright. Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+ Conveying under any other circumstances is permitted solely under
+the conditions stated below. Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+ 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+ No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+ When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+ 4. Conveying Verbatim Copies.
+
+ You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+ You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+ 5. Conveying Modified Source Versions.
+
+ You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+ a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+
+ b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under section
+ 7. This requirement modifies the requirement in section 4 to
+ "keep intact all notices".
+
+ c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+
+ d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your
+ work need not make them do so.
+
+ A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+ 6. Conveying Non-Source Forms.
+
+ You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+ a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium
+ customarily used for software interchange.
+
+ b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as
+ long as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the
+ Corresponding Source from a network server at no charge.
+
+ c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+
+ d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+
+ e) Convey the object code using peer-to-peer transmission, provided
+ you inform other peers where the object code and Corresponding
+ Source of the work are being offered to the general public at no
+ charge under subsection 6d.
+
+ A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+ A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling. In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage. For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product. A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+ "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source. The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+ If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+ The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed. Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+ Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+ 7. Additional Terms.
+
+ "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+ When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+ Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+ a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+
+ b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+
+ c) Prohibiting misrepresentation of the origin of that material, or
+ requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+
+ d) Limiting the use for publicity purposes of names of licensors or
+ authors of the material; or
+
+ e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+
+ f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions of
+ it) with contractual assumptions of liability to the recipient, for
+ any liability that these contractual assumptions directly impose on
+ those licensors and authors.
+
+ All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+ If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+ Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+ 8. Termination.
+
+ You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+ However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+ Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+ Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+ 9. Acceptance Not Required for Having Copies.
+
+ You are not required to accept this License in order to receive or
+run a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+ 10. Automatic Licensing of Downstream Recipients.
+
+ Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+ An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+ You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+ 11. Patents.
+
+ A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+ A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+ Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+ In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+ If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+ If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+ A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License. You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+ Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+ 12. No Surrender of Others' Freedom.
+
+ If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all. For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+ 13. Use with the GNU Affero General Public License.
+
+ Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+ 14. Revised Versions of this License.
+
+ The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation. If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+ If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+ Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+ 15. Disclaimer of Warranty.
+
+ THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. Limitation of Liability.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+ 17. Interpretation of Sections 15 and 16.
+
+ If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+ If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+ <program> Copyright (C) <year> <name of author>
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+ You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+ The GNU General Public License does not permit incorporating your program
+into proprietary programs. If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License. But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+using namespace zipper;
+
+CompressedFile::~CompressedFile()
+{
+}
+
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "gzip.hh"
+#include "zip.hh"
+#include "util.hh"
+
+#include <algorithm>
+
+using namespace zipper;
+
+class Compressor::CompressorImpl
+{
+public:
+ virtual ~CompressorImpl() {}
+
+ virtual void
+ addFile(const std::string& filename, const Reader& reader) = 0;
+};
+
+namespace
+{
+ class PlainCompressor : public Compressor::CompressorImpl
+ {
+ public:
+ PlainCompressor(const WriterPtr& writer) : m_writer(writer) {}
+
+ virtual void
+ addFile(const std::string&, const Reader& reader)
+ {
+ enum Constants
+ {
+ ChunkSize = 64*1024
+ };
+
+ uint8_t buffer[ChunkSize];
+ zsize_t offset(0);
+ while (offset < reader.getSize())
+ {
+ zsize_t bytes(
+ std::min(zsize_t(ChunkSize), reader.getSize() - offset));
+ reader.readData(offset, bytes, &buffer[0]);
+ m_writer->writeData(offset, bytes, &buffer[0]);
+ offset += bytes;
+ }
+ }
+ private:
+ WriterPtr m_writer;
+ };
+
+ class ZipCompressor : public Compressor::CompressorImpl
+ {
+ public:
+ ZipCompressor(const WriterPtr& writer) : m_writer(writer) {}
+
+ virtual ~ZipCompressor()
+ {
+ zipFinalise(m_records, m_writer);
+ }
+
+ virtual void
+ addFile(const std::string& filename, const Reader& reader)
+ {
+ ZipFileRecord record;
+ zip(filename, reader, m_writer, record);
+ m_records.push_back(record);
+ }
+ private:
+ WriterPtr m_writer;
+ std::vector<ZipFileRecord> m_records;
+ };
+
+ class GzipCompressor : public Compressor::CompressorImpl
+ {
+ public:
+ GzipCompressor(const WriterPtr& writer) : m_writer(writer) {}
+
+ virtual void
+ addFile(const std::string& filename, const Reader& reader)
+ {
+ gzip(filename, reader, m_writer);
+ }
+ private:
+ WriterPtr m_writer;
+ };
+}
+
+Compressor::Compressor(ContainerFormat format, const WriterPtr& writer)
+{
+ switch (format)
+ {
+ case Container_none:
+ m_compressor = new PlainCompressor(writer); break;
+
+ case Container_zip:
+ m_compressor = new ZipCompressor(writer); break;
+
+ case Container_gzip:
+ m_compressor = new GzipCompressor(writer); break;
+
+ default:
+ throw UnsupportedException("Unknown format");
+ }
+}
+
+Compressor::Compressor(ContainerFormat format, Writer& writer) :
+ m_compressor(NULL)
+{
+ WriterPtr ptr(&writer, dummy_delete<Writer>());
+ switch (format)
+ {
+ case Container_none:
+ m_compressor = new PlainCompressor(ptr); break;
+
+ case Container_zip:
+ m_compressor = new ZipCompressor(ptr); break;
+
+ case Container_gzip:
+ m_compressor = new GzipCompressor(ptr); break;
+
+ default:
+ throw UnsupportedException("Unknown format");
+ }
+}
+
+Compressor::~Compressor()
+{
+ delete m_compressor;
+}
+
+void
+Compressor::addFile(const Reader& reader)
+{
+ m_compressor->addFile(reader.getSourceName(), reader);
+}
+
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+using namespace zipper;
+
+namespace
+{
+ struct Container info_none =
+ { Container_none, "application/octet-stream", 13 };
+ struct Container info_zip =
+ { Container_zip, "application/zip", 0x1f };
+ struct Container info_gzip =
+ { Container_gzip, "zpplication/x-gzip", 7 };
+}
+
+namespace zipper
+{
+ const Container&
+ getContainer(ContainerFormat format)
+ {
+ switch (format)
+ {
+ case Container_none: return info_none;
+ case Container_zip: return info_zip;
+ case Container_gzip: return info_gzip;
+ default: throw Exception("Unknown format type requested");
+ }
+
+ }
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "util.hh"
+
+#include "gzip.hh"
+#include "zip.hh"
+
+using namespace zipper;
+
+namespace
+{
+ class PlainFile : public CompressedFile
+ {
+ public:
+ PlainFile(const ReaderPtr& reader) :
+ m_reader(reader)
+ {}
+
+ virtual bool isDecompressSupported() const { return true; }
+ virtual const std::string& getPath() const
+ {
+ return m_reader->getSourceName();
+ }
+ virtual zsize_t getCompressedSize() const
+ {
+ return m_reader->getSize();
+ }
+ virtual zsize_t getUncompressedSize() const
+ {
+ return m_reader->getSize();
+ }
+
+ virtual void decompress(Writer& writer)
+ {
+ enum Constants
+ {
+ ChunkSize = 64*1024
+ };
+ zsize_t end(m_reader->getSize());
+
+ for (zsize_t pos(0); pos < end; pos += ChunkSize)
+ {
+ uint8_t buf[ChunkSize];
+ size_t bytes(
+ std::min(zsize_t(ChunkSize), end - pos)
+ );
+ m_reader->readData(pos, bytes, &buf[0]);
+ writer.writeData(pos, bytes, &buf[0]);
+ }
+ }
+
+ virtual const timeval& getModificationTime() const
+ {
+ return m_reader->getModTime();
+ }
+
+ private:
+ ReaderPtr m_reader;
+ };
+}
+
+class Decompressor::DecompressorImpl
+{
+public:
+ DecompressorImpl(const ReaderPtr& reader) :
+ m_reader(reader),
+ m_format(Container_none)
+ {
+ if (isZip(reader))
+ {
+ m_format = Container_zip;
+ m_entries = unzip(reader);
+ }
+ else if (isGzip(reader))
+ {
+ m_format = Container_gzip;
+ m_entries = ungzip(reader);
+ }
+ else
+ {
+ m_format = Container_none;
+ m_entries.push_back(
+ CompressedFilePtr(new PlainFile(reader))
+ );
+ }
+ }
+
+ ContainerFormat getContainerFormat() const { return m_format; }
+
+ std::vector<CompressedFilePtr> getEntries() const { return m_entries; }
+
+private:
+ ReaderPtr m_reader;
+ ContainerFormat m_format;
+ std::vector<CompressedFilePtr> m_entries;
+};
+
+Decompressor::Decompressor(const ReaderPtr& reader) :
+ m_decompressor(new DecompressorImpl(reader))
+{
+}
+
+Decompressor::Decompressor(Reader& reader) :
+ m_decompressor(
+ new DecompressorImpl(ReaderPtr(&reader, dummy_delete<Reader>()))
+ )
+{
+}
+
+Decompressor::~Decompressor()
+{
+ delete m_decompressor;
+}
+
+ContainerFormat
+Decompressor::getContainerFormat() const
+{
+ return m_decompressor->getContainerFormat();
+}
+
+std::vector<CompressedFilePtr>
+Decompressor::getEntries() const
+{
+ return m_decompressor->getEntries();
+}
+
--- /dev/null
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file
+# that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = libzipper
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = @libzipper_version@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = doc
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF = "The $name class" \
+ "The $name widget" \
+ "The $name file" \
+ is \
+ provides \
+ specifies \
+ contains \
+ represents \
+ a \
+ an \
+ the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like regular Qt-style comments
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+# interpret the first line (until the first dot) of a Qt-style
+# comment as the brief description. If set to NO, the comments
+# will behave just like regular Qt-style comments (thus requiring
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 4
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for
+# Java. For instance, namespaces will be presented as packages, qualified
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources only. Doxygen will then generate output that is more tailored for
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given extension.
+# Doxygen has a built-in mapping, but you can override or extend it using this
+# tag. The format is ext=language, where ext is a file extension, and language
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING =
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT = YES
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+
+CPP_CLI_SUPPORT = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+# Doxygen will parse them like normal C++ but will assume all classes use public
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter
+# and setter methods for a property. Setting this option to YES (the default)
+# will make doxygen to replace the get and set methods by a property in the
+# documentation. This will only work if the methods are indeed getting or
+# setting a simple type. If this is not the case, or you want to show the
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+# is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically
+# be useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT = NO
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+# determine which symbols to keep in memory and which to flush to disk.
+# When the cache is full, less often used symbols will be written to disk.
+# For small to medium size projects (<1000 input files) the default value is
+# probably good enough. For larger projects a too small cache size can cause
+# doxygen to be busy swapping symbols to and from disk most of the time
+# causing a significant performance penality.
+# If the system has enough physical memory increasing the cache will improve the
+# performance by keeping more symbols in memory. Note that the value works on
+# a logarithmic scale so increasing the size by one will rougly double the
+# memory usage. The cache size is given by this formula:
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base
+# name of the file that contains the anonymous namespace. By default
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
+# will list include files with double quotes in the documentation
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
+# will sort the (brief and detailed) documentation of class members so that
+# constructors and destructors are listed first. If set to NO (the default)
+# the constructors will appear in the respective orders defined by
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+# hierarchy of group names into alphabetical order. If set to NO (the default)
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+# This will remove the Files entry from the Quick Index and from the
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+# Namespaces page. This will remove the Namespaces entry from the Quick Index
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. The create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option.
+# You can optionally specify a file name after the option, if omitted
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = @top_srcdir@/zipper.hh
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+# also the default input encoding. Doxygen uses libiconv (or the iconv built
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+# the list of possible encodings.
+
+INPUT_ENCODING = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS = *.c \
+ *.cc \
+ *.cxx \
+ *.cpp \
+ *.c++ \
+ *.d \
+ *.java \
+ *.ii \
+ *.ixx \
+ *.ipp \
+ *.i++ \
+ *.inl \
+ *.h \
+ *.hh \
+ *.hxx \
+ *.hpp \
+ *.h++ \
+ *.idl \
+ *.odl \
+ *.cs \
+ *.php \
+ *.php3 \
+ *.inc \
+ *.m \
+ *.mm \
+ *.dox \
+ *.py \
+ *.f90 \
+ *.f \
+ *.vhd \
+ *.vhdl
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code. Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
+# Doxygen will adjust the colors in the stylesheet and background images
+# according to this color. Hue is specified as an angle on a colorwheel,
+# see http://en.wikipedia.org/wiki/Hue for more information.
+# For instance the value 0 represents red, 60 is yellow, 120 is green,
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
+# the colors in the HTML output. For a value of 0 the output will use
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
+# the luminance component of the colors in the HTML output. Values below
+# 100 gradually make the output lighter, whereas values above 100 make
+# the output darker. The value divided by 100 is the actual gamma applied,
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded. For this to work a browser that supports
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS = NO
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files
+# will be generated that can be used as input for Apple's Xcode 3
+# integrated development environment, introduced with OSX 10.5 (Leopard).
+# To create a documentation set, doxygen will generate a Makefile in the
+# HTML output directory. Running make will produce the docset in that
+# directory and running "make install" will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+# it at startup.
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# for more information.
+
+GENERATE_DOCSET = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+# feed. A documentation feed provides an umbrella under which multiple
+# documentation sets from a single provider (such as a company or product suite)
+# can be grouped.
+
+DOCSET_FEEDNAME = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+# should uniquely identify the documentation set bundle. This should be a
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file
+# content.
+
+CHM_INDEX_ENCODING =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
+# that can be used as input for Qt's qhelpgenerator to generate a
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+# be used to specify the file name of the resulting .qch file.
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+# Qt Help Project output. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
+# add. For more information please see
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME =
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's
+# filter section matches.
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS =
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+# be used to specify the location of Qt's qhelpgenerator.
+# If non-empty doxygen will try to run qhelpgenerator on the generated
+# .qhp file.
+
+QHG_LOCATION =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
+# will be generated, which together with the HTML files, form an Eclipse help
+# plugin. To install this plugin and make it available under the help contents
+# menu in Eclipse, the contents of the directory containing the HTML and XML
+# files needs to be copied into the plugins directory of eclipse. The name of
+# the directory within the plugins directory should be the same as
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
+# the help appears.
+
+GENERATE_ECLIPSEHELP = NO
+
+# A unique identifier for the eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have
+# this name.
+
+ECLIPSE_DOC_ID = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information.
+# If the tag value is set to YES, a side panel will be generated
+# containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW = NO
+
+# Use this tag to change the font size of Latex formulas included
+# as images in the HTML documentation. The default is 10. Note that
+# when you change the font size after a successful doxygen run you need
+# to manually remove any form_*.png images from the HTML output directory
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are
+# not supported properly for IE 6.0, but are supported on all modern browsers.
+# Note that when changing this option you need to delete any form_*.png files
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT = YES
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box
+# for the HTML output. The underlying search engine uses javascript
+# and DHTML and should work on any modern browser. Note that when using
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
+# (GENERATE_DOCSET) there is already a search function so this one should
+# typically be disabled. For large projects the javascript based search engine
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE = NO
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a PHP enabled web server instead of at the web client
+# using Javascript. Doxygen will generate the search PHP script and index
+# file to put on the web server. The advantage of the server
+# based approach is that it scales better to large projects and allows
+# full text search. The disadvances is that it is more difficult to setup
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = YES
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+# Note that when enabling USE_PDFLATEX this option is only used for
+# generating bitmaps for formulas in the HTML output, but not in the
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
+# source code with syntax highlighting in the LaTeX output.
+# Note that which sources are shown also depends on other settings
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = YES
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = YES
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. Doxygen will then run the mscgen tool (see
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where
+# the mscgen tool resides. If left empty the tool is assumed to be found in the
+# default search path.
+
+MSCGEN_PATH =
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
+# allowed to run in parallel. When set to 0 (the default) doxygen will
+# base this on the number of processors available in the system. You can set it
+# explicitly to a value larger than 0 to get control over the balance
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output
+# directory and reference it in all dot files that doxygen generates. This
+# font does not include all possible unicode characters however, so when you need
+# these (or just want a differently looking font) you can specify the font name
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+# which can be done by putting it in a standard location or by setting the
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+# containing the font.
+
+DOT_FONTNAME = FreeSans.ttf
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+# The default size is 10pt.
+
+DOT_FONTSIZE = 10
+
+# By default doxygen will tell dot to use the output directory to look for the
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a
+# different font using DOT_FONTNAME you can set the path where dot
+# can find it using this tag.
+
+DOT_FONTPATH =
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then
+# doxygen will generate a call dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable call graphs
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+# doxygen will generate a caller dependency graph for every global function
+# or class method. Note that enabling this option will significantly increase
+# the time of a run. So in most cases it will be better to enable caller
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+# nodes that will be shown in the graph. If the number of nodes in a graph
+# becomes larger than this value, doxygen will truncate the graph, which is
+# visualized by representing a node as a red box. Note that doxygen if the
+# number of direct children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not
+# seem to support this out of the box. Warning: Depending on the platform used,
+# enabling this option may lead to badly anti-aliased labels on the edges of
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+using namespace zipper;
+
+Exception::Exception(const std::string& what) :
+ std::runtime_error(what)
+{
+}
+
+FormatException::FormatException(const std::string& what) :
+ Exception(what)
+{
+}
+
+UnsupportedException::UnsupportedException(const std::string& what) :
+ Exception(what)
+{
+}
+
+IOException::IOException(const std::string& what) :
+ Exception(what)
+{
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "strerror.hh"
+
+#include <cassert>
+#include <sstream>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+
+using namespace zipper;
+
+const timeval zipper::s_now = {0,0};
+
+
+class FileReader::FileReaderImpl
+{
+public:
+ FileReaderImpl(const std::string& filename) :
+ m_filename(filename),
+ m_fd(-1),
+ m_closeOnExit(true)
+ {
+ m_fd = ::open(filename.c_str(), O_RDONLY);
+
+ if (m_fd < 0)
+ {
+ std::string errMsg(zipper::strerror(errno));
+
+ std::stringstream message;
+ message << "Could not open file \"" << filename << "\": " <<
+ errMsg;
+ throw IOException(message.str());
+ }
+ initStats();
+ }
+
+ FileReaderImpl(const std::string& filename, int fd, bool closeFd) :
+ m_filename(filename),
+ m_fd(fd),
+ m_closeOnExit(closeFd)
+ {
+ initStats();
+ }
+
+ ~FileReaderImpl()
+ {
+ close();
+ }
+
+ const std::string& getSourceName() const { return m_filename; }
+ const timeval& getModTime() const { return m_modTime; }
+
+ zsize_t getSize() const { return m_size; }
+
+ virtual void readData(
+ zsize_t offset, zsize_t bytes, uint8_t* dest
+ ) const
+ {
+ assert(m_fd >= 0);
+
+ zsize_t bytesRead(0);
+ while(bytesRead < bytes)
+ {
+ ssize_t currentBytes(
+ pread(
+ m_fd,
+ dest + bytesRead,
+ bytes - bytesRead,
+ offset + bytesRead)
+ );
+
+ if (currentBytes > 0)
+ {
+ bytesRead += static_cast<zsize_t>(currentBytes);
+ }
+ else if (currentBytes == 0)
+ {
+ throw FormatException("Unexpected end-of-file");
+ }
+ else if ((currentBytes < 0) && (errno != EINTR))
+ {
+ std::string errMsg(zipper::strerror(errno));
+ throw IOException(errMsg);
+ }
+ }
+ }
+
+private:
+ void initStats()
+ {
+ // If we fail here, we need to essentially run the dtor manually.
+ // initStats is called from the constructors, and so the dtor will
+ // NOT run if an exception is thrown.
+
+ struct stat buf;
+ int result(fstat(m_fd, &buf));
+ if (result != 0)
+ {
+ int errnoLocal = errno;
+ close();
+
+ std::string errMsg(zipper::strerror(errnoLocal));
+
+ std::stringstream message;
+ message << "Could not get filesize for file " <<
+ "\"" << m_filename << "\": " << errMsg;
+ throw IOException(message.str());
+ }
+ else
+ {
+ m_size = buf.st_size;
+ m_modTime.tv_sec = buf.st_mtime;
+ m_modTime.tv_usec = 0;
+ }
+ }
+
+ void close()
+ {
+ if ((m_fd >= 0) && m_closeOnExit)
+ {
+ ::close(m_fd);
+ m_fd = -1;
+ }
+ }
+ std::string m_filename;
+ int m_fd;
+ bool m_closeOnExit;
+ zsize_t m_size;
+ timeval m_modTime;
+};
+
+FileReader::FileReader(const std::string& filename) :
+ m_impl(new FileReaderImpl(filename))
+{
+}
+
+FileReader::FileReader(const std::string& filename, int fd, bool closeFd) :
+ m_impl(new FileReaderImpl(filename, fd, closeFd))
+{
+}
+
+FileReader::~FileReader()
+{
+ delete m_impl;
+}
+
+const std::string&
+FileReader::getSourceName() const
+{
+ return m_impl->getSourceName();
+}
+
+const timeval&
+FileReader::getModTime() const
+{
+ return m_impl->getModTime();
+}
+
+zsize_t
+FileReader::getSize() const
+{
+ return m_impl->getSize();
+}
+
+void
+FileReader::readData(
+ zsize_t offset, zsize_t bytes, uint8_t* dest
+ ) const
+{
+ return m_impl->readData(offset, bytes, dest);
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "strerror.hh"
+
+#include <algorithm>
+#include <cassert>
+#include <sstream>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <utime.h>
+#include <errno.h>
+
+using namespace zipper;
+
+class FileWriter::FileWriterImpl
+{
+public:
+ FileWriterImpl(
+ const std::string& filename,
+ mode_t createPermissions,
+ const timeval& modTime
+ ) :
+ m_filename(filename),
+ m_modTime(modTime),
+ m_fd(-1),
+ m_closeOnExit(true),
+ m_setModTimeOnExit(true)
+ {
+ m_fd =
+ ::open(
+ filename.c_str(),
+ O_WRONLY | O_TRUNC | O_CREAT,
+ createPermissions);
+
+ if (m_fd < 0)
+ {
+ std::string errMsg(zipper::strerror(errno));
+
+ std::stringstream message;
+ message << "Could not open file \"" << filename << "\": " <<
+ errMsg;
+ throw IOException(message.str());
+ }
+ }
+
+ FileWriterImpl(const std::string& filename, int fd, bool closeFd) :
+ m_filename(filename),
+ m_fd(fd),
+ m_closeOnExit(closeFd),
+ m_setModTimeOnExit(false)
+ {
+ }
+
+ ~FileWriterImpl()
+ {
+ close();
+
+ if (m_setModTimeOnExit)
+ {
+ struct timeval times[2];
+ if (s_now.tv_sec == m_modTime.tv_sec)
+ {
+ gettimeofday(×[0], NULL);
+ times[1] = times[0];
+ }
+ else
+ {
+ times[0] = m_modTime;
+ times[1] = m_modTime;
+ }
+ utimes(m_filename.c_str(), times);
+ }
+ }
+
+ virtual void writeData(
+ zsize_t offset, zsize_t bytes, const uint8_t* data
+ ) const
+ {
+ assert(m_fd >= 0);
+
+ zsize_t bytesWritten(0);
+ while(bytesWritten < bytes)
+ {
+ ssize_t currentBytes(
+ pwrite(
+ m_fd,
+ data + bytesWritten,
+ bytes - bytesWritten,
+ offset + bytesWritten)
+ );
+
+ if (currentBytes >= 0)
+ {
+ bytesWritten += static_cast<zsize_t>(currentBytes);
+ }
+ else if ((currentBytes < 0) && (errno != EINTR))
+ {
+ std::string errMsg(zipper::strerror(errno));
+ throw IOException(errMsg);
+ }
+ }
+ }
+
+ zsize_t getSize() const
+ {
+ assert(m_fd >= 0);
+ zsize_t result(lseek(m_fd, 0, SEEK_END));
+ return result;
+ }
+
+private:
+ void close()
+ {
+ if ((m_fd >= 0) && m_closeOnExit)
+ {
+ ::close(m_fd);
+ m_fd = -1;
+ }
+ }
+
+ std::string m_filename;
+ timeval m_modTime;
+ int m_fd;
+ bool m_closeOnExit;
+ bool m_setModTimeOnExit;
+};
+
+FileWriter::FileWriter(
+ const std::string& filename,
+ mode_t createPermissions,
+ const timeval& modTime) :
+ m_impl(new FileWriterImpl(filename, createPermissions, modTime))
+{
+}
+
+FileWriter::FileWriter(const std::string& filename, int fd, bool closeFd) :
+ m_impl(new FileWriterImpl(filename, fd, closeFd))
+{
+}
+
+FileWriter::~FileWriter()
+{
+ delete m_impl;
+}
+
+void
+FileWriter::writeData(zsize_t offset, zsize_t bytes, const uint8_t* data)
+{
+ m_impl->writeData(offset, bytes, data);
+}
+
+zsize_t
+FileWriter::getSize() const
+{
+ return m_impl->getSize();
+}
+
--- /dev/null
+libzipper
+Michael McMaster <michael@codesrc.com>
+
+* Refer to INSTALL.Android for Google Android NDK compilation information.
+
+Pre-Requisites
+ g++ (4.5.3)
+ make (GNU make 3.81)
+ zlib (1.2.3)
+ doxygen (1.7.4)
+
+Optional
+ automake (1.11), autoconf (2.68), libtool (2.4)
+ (Required if building from git)
+
+ graphviz (2.26.3) (for dependency diagrams in the generated docs)
+
+When building from sources obtained from the git repository, the configure
+script must be created first using the autoconf/automake/libtool packages.
+The supplied autogen.sh script automates this process.
+
+*NOTE: it is not necessary to run the autogen.sh script when using a
+source distribution release. ie. If you obtained the sources via
+libzipper-major.minor.patch.tar.gz, do not run autogen.sh
+
+ ./autogen.sh
+
+The configure script creates the makefiles specific to your host. eg. It
+allows the paths to dependant packages to be specified.
+
+ ./configure --prefix=/usr
+
+The --prefix option specifies the base installation directory, and defaults
+to /usr/local (in which case, the library would be installed in /usr/local/lib,
+and the zipper binary would be installed in /usr/local/bin).
+
+To obtain a complete listing of configure options, use the --help option.
+
+ ./configure --help
+
+Once the configure script is run, the software can be compiled.
+
+ make
+
+Now it's time to install the software. This step must be run by a user with
+write access to the installation directory (/usr/local by default).
+
+ make install
+
--- /dev/null
+libzipper
+Michael McMaster <michael@codesrc.com>
+
+Pre-Requisites
+ Android NDK (tested with android-ndk-r6)
+ Existing Android project
+
+NDK Limitations
+ * Your Application.mk file must enable C++ exceptions with:
+ APP_CPPFLAGS := -fexceptions -frtti
+ Although the NDK supports exceptions as of r5, they are disabled by
+ default for backwards compatibility.
+
+ * Your Application.mk file must specify a C++ STL implementation with
+ exception support. As of r6, only gnustl_static provides exception support.
+ APP_STL := gnustl_static
+
+Note that this port doesn't include any JNI interface code. It is expected that
+libzipper will be called from other native code libraries, and not directly
+from Java.
+
+Including libzipper in your NDK project:
+1) Modify your Application.mk file to include the module, and
+ set APP_CPPFLAGS and APP_STL as stated under "NDK Limitations" above.
+
+ APP_CPPFLAGS += -fexceptions -frtti
+ APP_STL := gnustl_static
+ APP_MODULES += zipper
+
+2) Modify your applications Android.mk file to import the libzipper module:
+
+ LOCAL_STATIC_LIBRARIES += libzipper
+ $(call import-module,zipper)
+
+3) Set the NDK_MODULE_PATH variable to include the libzipper source directory
+ when calling ndk-build.
+ eg. If libzipper was extracted to /tmp/libzipper-1.0.3:
+
+ cd /path/to/your/ndk/application
+ ndk-build NDK_MODULE_PATH="/tmp/libzipper-1.0.3/android"
--- /dev/null
+# Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+#
+# This file is part of libzipper.
+#
+# libzipper is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# libzipper is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+include doxygen.am
+
+dist_noinst_SCRIPTS = \
+ autogen.sh
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libzipper1.pc
+
+EXTRA_DIST = \
+ COPYING \
+ INSTALL \
+ INSTALL.Android \
+ NEWS \
+ README \
+ VERSION \
+ android/zipper/Android.mk
+
+
+lib_LTLIBRARIES = libzipper.la
+libzipper_la_SOURCES = \
+ Compressor.cc \
+ CompressedFile.cc \
+ Container.cc \
+ Decompressor.cc \
+ deflate.cc \
+ deflate.hh \
+ Exception.cc \
+ FileReader.cc \
+ FileWriter.cc \
+ gzip.cc \
+ gzip.hh \
+ Reader.cc \
+ split.hh \
+ strerror.hh \
+ util.hh \
+ Writer.cc \
+ zip.hh \
+ zip.cc
+
+if HAVE_GNU_STRERROR
+libzipper_la_SOURCES += \
+ port/strerror_gnu.cc
+else
+libzipper_la_SOURCES += \
+ port/strerror_posix.cc
+endif
+
+# Public API headers go here, for installation to /usr/include
+include_HEADERS = zipper.hh
+
+libzipper_la_LDFLAGS = ${ZLIB_LIBS} -version-info 1:0
+libzipper_la_CFLAGS = ${ZLIB_CFLAGS}
+
+bin_PROGRAMS = zipper
+man_MANS = zipper.1
+
+zipper_SOURCES = \
+ zipper.cc
+
+zipper_LDADD = libzipper.la
+
+CXXFLAGS=-g -O2 -W -Wall -std=c++0x
+
+MOSTLYCLEANFILES=$(DX_CLEANFILES)
+
+install-data-local: doxygen-install
+all-local: doxygen-doc
+
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+#
+# This file is part of libzipper.
+#
+# libzipper is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# libzipper is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+DIST_COMMON = README $(am__configure_deps) $(dist_noinst_SCRIPTS) \
+ $(include_HEADERS) $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/autoconfig.h.in \
+ $(srcdir)/doxygen.am $(srcdir)/libzipper1.pc.in \
+ $(srcdir)/zipper.1.in $(top_srcdir)/configure COPYING INSTALL \
+ NEWS config.guess config.sub depcomp install-sh ltmain.sh \
+ missing
+@DX_COND_doc_TRUE@@DX_COND_html_TRUE@am__append_1 = doxygen-install-html
+@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@am__append_2 = doxygen-install-chm
+@DX_COND_doc_TRUE@@DX_COND_man_TRUE@am__append_3 = doxygen-install-man
+@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@am__append_4 = doxygen-install-rtf
+@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@am__append_5 = doxygen-install-xml
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@am__append_6 = doxygen-install-ps
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@am__append_7 = doxygen-install-pdf
+@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@am__append_8 = doxygen-install-latex
+@HAVE_GNU_STRERROR_TRUE@am__append_9 = \
+@HAVE_GNU_STRERROR_TRUE@ port/strerror_gnu.cc
+
+@HAVE_GNU_STRERROR_FALSE@am__append_10 = \
+@HAVE_GNU_STRERROR_FALSE@ port/strerror_posix.cc
+
+bin_PROGRAMS = zipper$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = autoconfig.h
+CONFIG_CLEAN_FILES = Doxyfile libzipper1.pc zipper.1
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \
+ "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libzipper_la_LIBADD =
+am__libzipper_la_SOURCES_DIST = Compressor.cc CompressedFile.cc \
+ Container.cc Decompressor.cc deflate.cc deflate.hh \
+ Exception.cc FileReader.cc FileWriter.cc gzip.cc gzip.hh \
+ Reader.cc split.hh strerror.hh util.hh Writer.cc zip.hh zip.cc \
+ port/strerror_gnu.cc port/strerror_posix.cc
+@HAVE_GNU_STRERROR_TRUE@am__objects_1 = strerror_gnu.lo
+@HAVE_GNU_STRERROR_FALSE@am__objects_2 = strerror_posix.lo
+am_libzipper_la_OBJECTS = Compressor.lo CompressedFile.lo Container.lo \
+ Decompressor.lo deflate.lo Exception.lo FileReader.lo \
+ FileWriter.lo gzip.lo Reader.lo Writer.lo zip.lo \
+ $(am__objects_1) $(am__objects_2)
+libzipper_la_OBJECTS = $(am_libzipper_la_OBJECTS)
+libzipper_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+ $(CXXFLAGS) $(libzipper_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_zipper_OBJECTS = zipper.$(OBJEXT)
+zipper_OBJECTS = $(am_zipper_OBJECTS)
+zipper_DEPENDENCIES = libzipper.la
+SCRIPTS = $(dist_noinst_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libzipper_la_SOURCES) $(zipper_SOURCES)
+DIST_SOURCES = $(am__libzipper_la_SOURCES_DIST) $(zipper_SOURCES)
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+DATA = $(pkgconfig_DATA)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d "$(distdir)" \
+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = -g -O2 -W -Wall -std=c++0x
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DX_CONFIG = @DX_CONFIG@
+DX_DOCDIR = @DX_DOCDIR@
+DX_DOT = @DX_DOT@
+DX_DOXYGEN = @DX_DOXYGEN@
+DX_DVIPS = @DX_DVIPS@
+DX_EGREP = @DX_EGREP@
+DX_ENV = @DX_ENV@
+DX_FLAG_chi = @DX_FLAG_chi@
+DX_FLAG_chm = @DX_FLAG_chm@
+DX_FLAG_doc = @DX_FLAG_doc@
+DX_FLAG_dot = @DX_FLAG_dot@
+DX_FLAG_html = @DX_FLAG_html@
+DX_FLAG_man = @DX_FLAG_man@
+DX_FLAG_pdf = @DX_FLAG_pdf@
+DX_FLAG_ps = @DX_FLAG_ps@
+DX_FLAG_rtf = @DX_FLAG_rtf@
+DX_FLAG_xml = @DX_FLAG_xml@
+DX_HHC = @DX_HHC@
+DX_LATEX = @DX_LATEX@
+DX_MAKEINDEX = @DX_MAKEINDEX@
+DX_PDFLATEX = @DX_PDFLATEX@
+DX_PERL = @DX_PERL@
+DX_PROJECT = @DX_PROJECT@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ZLIB_CFLAGS = @ZLIB_CFLAGS@
+ZLIB_LIBS = @ZLIB_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libzipper_version = @libzipper_version@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+DOXYGEN_INSTALL = $(am__append_1) $(am__append_2) $(am__append_3) \
+ $(am__append_4) $(am__append_5) $(am__append_6) \
+ $(am__append_7) $(am__append_8)
+@DX_COND_doc_TRUE@@DX_COND_html_TRUE@DX_CLEAN_HTML = @DX_DOCDIR@/html
+@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHM = @DX_DOCDIR@/chm
+@DX_COND_chi_TRUE@@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi
+@DX_COND_doc_TRUE@@DX_COND_man_TRUE@DX_CLEAN_MAN = @DX_DOCDIR@/man
+@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@DX_CLEAN_RTF = @DX_DOCDIR@/rtf
+@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@DX_CLEAN_XML = @DX_DOCDIR@/xml
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_PS_GOAL = doxygen-ps
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_PDF_GOAL = doxygen-pdf
+@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@DX_CLEAN_LATEX = @DX_DOCDIR@/latex
+@DX_COND_doc_TRUE@DX_CLEANFILES = \
+@DX_COND_doc_TRUE@ @DX_DOCDIR@/@PACKAGE@.tag \
+@DX_COND_doc_TRUE@ -r \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_HTML) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_CHM) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_CHI) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_MAN) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_RTF) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_XML) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_PS) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_PDF) \
+@DX_COND_doc_TRUE@ $(DX_CLEAN_LATEX)
+
+dist_noinst_SCRIPTS = \
+ autogen.sh
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libzipper1.pc
+EXTRA_DIST = \
+ COPYING \
+ INSTALL \
+ INSTALL.Android \
+ NEWS \
+ README \
+ VERSION \
+ android/zipper/Android.mk
+
+lib_LTLIBRARIES = libzipper.la
+libzipper_la_SOURCES = Compressor.cc CompressedFile.cc Container.cc \
+ Decompressor.cc deflate.cc deflate.hh Exception.cc \
+ FileReader.cc FileWriter.cc gzip.cc gzip.hh Reader.cc split.hh \
+ strerror.hh util.hh Writer.cc zip.hh zip.cc $(am__append_9) \
+ $(am__append_10)
+
+# Public API headers go here, for installation to /usr/include
+include_HEADERS = zipper.hh
+libzipper_la_LDFLAGS = ${ZLIB_LIBS} -version-info 1:0
+libzipper_la_CFLAGS = ${ZLIB_CFLAGS}
+man_MANS = zipper.1
+zipper_SOURCES = \
+ zipper.cc
+
+zipper_LDADD = libzipper.la
+MOSTLYCLEANFILES = $(DX_CLEANFILES)
+all: autoconfig.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .cc .lo .o .obj
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doxygen.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+autoconfig.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/autoconfig.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status autoconfig.h
+$(srcdir)/autoconfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f autoconfig.h stamp-h1
+Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+libzipper1.pc: $(top_builddir)/config.status $(srcdir)/libzipper1.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+zipper.1: $(top_builddir)/config.status $(srcdir)/zipper.1.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+libzipper.la: $(libzipper_la_OBJECTS) $(libzipper_la_DEPENDENCIES)
+ $(libzipper_la_LINK) -rpath $(libdir) $(libzipper_la_OBJECTS) $(libzipper_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p || test -f $$p1; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+zipper$(EXEEXT): $(zipper_OBJECTS) $(zipper_DEPENDENCIES)
+ @rm -f zipper$(EXEEXT)
+ $(CXXLINK) $(zipper_OBJECTS) $(zipper_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CompressedFile.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Compressor.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Container.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Decompressor.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Exception.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FileReader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/FileWriter.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Reader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Writer.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/deflate.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gzip.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror_gnu.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror_posix.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zipper.Po@am__quote@
+
+.cc.o:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
+
+strerror_gnu.lo: port/strerror_gnu.cc
+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT strerror_gnu.lo -MD -MP -MF $(DEPDIR)/strerror_gnu.Tpo -c -o strerror_gnu.lo `test -f 'port/strerror_gnu.cc' || echo '$(srcdir)/'`port/strerror_gnu.cc
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/strerror_gnu.Tpo $(DEPDIR)/strerror_gnu.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='port/strerror_gnu.cc' object='strerror_gnu.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o strerror_gnu.lo `test -f 'port/strerror_gnu.cc' || echo '$(srcdir)/'`port/strerror_gnu.cc
+
+strerror_posix.lo: port/strerror_posix.cc
+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT strerror_posix.lo -MD -MP -MF $(DEPDIR)/strerror_posix.Tpo -c -o strerror_posix.lo `test -f 'port/strerror_posix.cc' || echo '$(srcdir)/'`port/strerror_posix.cc
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/strerror_posix.Tpo $(DEPDIR)/strerror_posix.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='port/strerror_posix.cc' object='strerror_posix.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o strerror_posix.lo `test -f 'port/strerror_posix.cc' || echo '$(srcdir)/'`port/strerror_posix.cc
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ { for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ test -z "$$files" || { \
+ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+install-includeHEADERS: $(include_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+ done
+
+uninstall-includeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) autoconfig.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) autoconfig.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) autoconfig.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) autoconfig.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically \`make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @$(am__cd) '$(distuninstallcheck_dir)' \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \
+ $(HEADERS) autoconfig.h all-local
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+ clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-includeHEADERS install-man \
+ install-pkgconfigDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+ uninstall-libLTLIBRARIES uninstall-man uninstall-pkgconfigDATA
+
+uninstall-man: uninstall-man1
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am all-local am--refresh check check-am \
+ clean clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+ clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+ dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+ distclean distclean-compile distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-data \
+ install-data-am install-data-local install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-includeHEADERS install-info install-info-am \
+ install-libLTLIBRARIES install-man install-man1 install-pdf \
+ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-includeHEADERS \
+ uninstall-libLTLIBRARIES uninstall-man uninstall-man1 \
+ uninstall-pkgconfigDATA
+
+
+@DX_COND_doc_TRUE@@DX_COND_html_TRUE@doxygen-install-html:
+@DX_COND_doc_TRUE@@DX_COND_html_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/html; \
+@DX_COND_doc_TRUE@@DX_COND_html_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/html/* $(DESTDIR)$(docdir)/html;
+
+@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@doxygen-install-chm:
+@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/chm; \
+@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/chm/* $(DESTDIR)$(docdir)/chm;
+
+@DX_COND_doc_TRUE@@DX_COND_man_TRUE@doxygen-install-man:
+@DX_COND_doc_TRUE@@DX_COND_man_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/man; \
+@DX_COND_doc_TRUE@@DX_COND_man_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/man/* $(DESTDIR)$(docdir)/man;
+
+@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@doxygen-install-rtf:
+@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/rtf; \
+@DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/rtf/* $(DESTDIR)$(docdir)/rtf;
+
+@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@doxygen-install-xml:
+@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/xml; \
+@DX_COND_doc_TRUE@@DX_COND_xml_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/xml/* $(DESTDIR)$(docdir)/xml;
+
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps
+
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ cd @DX_DOCDIR@/latex; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(MAKEINDEX_PATH) refman.idx; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=5; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ refman.log > /dev/null 2>&1 \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ && test $$countdown -gt 0; do \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=`expr $$countdown - 1`; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ done; \
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi
+
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-install-ps:
+@DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.ps $(DESTDIR)$(docdir);
+
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf
+
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ cd @DX_DOCDIR@/latex; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_MAKEINDEX) refman.idx; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=5; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ refman.log > /dev/null 2>&1 \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ && test $$countdown -gt 0; do \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=`expr $$countdown - 1`; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ done; \
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ mv refman.pdf ../@PACKAGE@.pdf
+
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-install-pdf:
+@DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.pdf $(DESTDIR)$(docdir);
+
+@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@doxygen-install-latex:
+@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/latex; \
+@DX_COND_doc_TRUE@@DX_COND_latex_TRUE@ $(INSTALL_DATA) @DX_DOCDIR@/latex/* $(DESTDIR)$(docdir)/latex;
+
+@DX_COND_doc_TRUE@.PHONY: doxygen-run doxygen-doc doxygen-install $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+@DX_COND_doc_TRUE@.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+@DX_COND_doc_TRUE@doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag
+
+@DX_COND_doc_TRUE@doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+@DX_COND_doc_TRUE@doxygen-install: $(DOXYGEN_INSTALL)
+
+@DX_COND_doc_TRUE@@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS)
+@DX_COND_doc_TRUE@ rm -rf @DX_DOCDIR@
+@DX_COND_doc_TRUE@ $(DX_ENV) $(DX_DOXYGEN) $(DX_CONFIG)
+
+install-data-local: doxygen-install
+all-local: doxygen-doc
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+2011-10-05 Version 1.0.3
+ - Added Android NDK support
+
+2011-09-07 Version 1.0.2
+ - Fixed a bug in deflate, which caused it to exit prematurely and
+ report valid files as corrupt.
+
+2011-05-27 Version 1.0.1
+ - Removed private classes from doxygen output
+ - Added the zipper utility executable
+ - Added timestamp support
+
+2011-05-21 Version 1.0.0
+ - Initial release
+
--- /dev/null
+libzipper
+Michael McMaster <michael@codesrc.com>
+
+libzipper offers a flexible C++ interface for reading and writing compressed
+files in multiple formats. It is intended for use in reading small compressed
+data files, such as configuration files and saved games.
+
+libzipper currently supports plain, zip, and gzip formats.
+
+libzipper is not a general-purpose archive management library, as it
+does not provide access to the filesystem attributes of each file.
+(ie. libzipper does not support the concepts of file owner, group or
+permissions.
+
+Missing Features
+ - zip64 support (for >4Gb zip files)
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+using namespace zipper;
+
+Reader::~Reader()
+{
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+using namespace zipper;
+
+Writer::~Writer()
+{
+}
+
--- /dev/null
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR])
+# DX_DOXYGEN_FEATURE(ON|OFF)
+# DX_DOT_FEATURE(ON|OFF)
+# DX_HTML_FEATURE(ON|OFF)
+# DX_CHM_FEATURE(ON|OFF)
+# DX_CHI_FEATURE(ON|OFF)
+# DX_MAN_FEATURE(ON|OFF)
+# DX_RTF_FEATURE(ON|OFF)
+# DX_XML_FEATURE(ON|OFF)
+# DX_PDF_FEATURE(ON|OFF)
+# DX_PS_FEATURE(ON|OFF)
+#
+# DESCRIPTION
+#
+# The DX_*_FEATURE macros control the default setting for the given
+# Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for
+# generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML
+# help (for MS users), 'CHI' for generating a seperate .chi file by the
+# .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate
+# output formats. The environment variable DOXYGEN_PAPER_SIZE may be
+# specified to override the default 'a4wide' paper size.
+#
+# By default, HTML, PDF and PS documentation is generated as this seems to
+# be the most popular and portable combination. MAN pages created by
+# Doxygen are usually problematic, though by picking an appropriate subset
+# and doing some massaging they might be better than nothing. CHM and RTF
+# are specific for MS (note that you can't generate both HTML and CHM at
+# the same time). The XML is rather useless unless you apply specialized
+# post-processing to it.
+#
+# The macros mainly control the default state of the feature. The use can
+# override the default by specifying --enable or --disable. The macros
+# ensure that contradictory flags are not given (e.g.,
+# --enable-doxygen-html and --enable-doxygen-chm,
+# --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each
+# feature will be automatically disabled (with a warning) if the required
+# programs are missing.
+#
+# Once all the feature defaults have been specified, call DX_INIT_DOXYGEN
+# with the following parameters: a one-word name for the project for use
+# as a filename base etc., an optional configuration file name (the
+# default is 'Doxyfile', the same as Doxygen's default), and an optional
+# output directory name (the default is 'doxygen-doc').
+#
+# Automake Support
+#
+# The following is a template aminclude.am file for use with Automake.
+# Make targets and variables values are controlled by the various
+# DX_COND_* conditionals set by autoconf.
+#
+# The provided targets are:
+#
+# doxygen-doc: Generate all doxygen documentation.
+#
+# doxygen-run: Run doxygen, which will generate some of the
+# documentation (HTML, CHM, CHI, MAN, RTF, XML)
+# but will not do the post processing required
+# for the rest of it (PS, PDF, and some MAN).
+#
+# doxygen-man: Rename some doxygen generated man pages.
+#
+# doxygen-ps: Generate doxygen PostScript documentation.
+#
+# doxygen-pdf: Generate doxygen PDF documentation.
+#
+# Note that by default these are not integrated into the automake targets.
+# If doxygen is used to generate man pages, you can achieve this
+# integration by setting man3_MANS to the list of man pages generated and
+# then adding the dependency:
+#
+# $(man3_MANS): doxygen-doc
+#
+# This will cause make to run doxygen and generate all the documentation.
+#
+# The following variable is intended for use in Makefile.am:
+#
+# DX_CLEANFILES = everything to clean.
+#
+# Then add this variable to MOSTLYCLEANFILES.
+#
+# ----- begin aminclude.am -------------------------------------
+#
+# ## --------------------------------- ##
+# ## Format-independent Doxygen rules. ##
+# ## --------------------------------- ##
+#
+# if DX_COND_doc
+#
+# ## ------------------------------- ##
+# ## Rules specific for HTML output. ##
+# ## ------------------------------- ##
+#
+# if DX_COND_html
+#
+# DX_CLEAN_HTML = @DX_DOCDIR@/html
+#
+# endif DX_COND_html
+#
+# ## ------------------------------ ##
+# ## Rules specific for CHM output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_chm
+#
+# DX_CLEAN_CHM = @DX_DOCDIR@/chm
+#
+# if DX_COND_chi
+#
+# DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi
+#
+# endif DX_COND_chi
+#
+# endif DX_COND_chm
+#
+# ## ------------------------------ ##
+# ## Rules specific for MAN output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_man
+#
+# DX_CLEAN_MAN = @DX_DOCDIR@/man
+#
+# endif DX_COND_man
+#
+# ## ------------------------------ ##
+# ## Rules specific for RTF output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_rtf
+#
+# DX_CLEAN_RTF = @DX_DOCDIR@/rtf
+#
+# endif DX_COND_rtf
+#
+# ## ------------------------------ ##
+# ## Rules specific for XML output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_xml
+#
+# DX_CLEAN_XML = @DX_DOCDIR@/xml
+#
+# endif DX_COND_xml
+#
+# ## ----------------------------- ##
+# ## Rules specific for PS output. ##
+# ## ----------------------------- ##
+#
+# if DX_COND_ps
+#
+# DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps
+#
+# DX_PS_GOAL = doxygen-ps
+#
+# doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps
+#
+# @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag
+# cd @DX_DOCDIR@/latex; \
+# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+# $(DX_LATEX) refman.tex; \
+# $(MAKEINDEX_PATH) refman.idx; \
+# $(DX_LATEX) refman.tex; \
+# countdown=5; \
+# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+# refman.log > /dev/null 2>&1 \
+# && test $$countdown -gt 0; do \
+# $(DX_LATEX) refman.tex; \
+# countdown=`expr $$countdown - 1`; \
+# done; \
+# $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi
+#
+# endif DX_COND_ps
+#
+# ## ------------------------------ ##
+# ## Rules specific for PDF output. ##
+# ## ------------------------------ ##
+#
+# if DX_COND_pdf
+#
+# DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf
+#
+# DX_PDF_GOAL = doxygen-pdf
+#
+# doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf
+#
+# @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag
+# cd @DX_DOCDIR@/latex; \
+# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+# $(DX_PDFLATEX) refman.tex; \
+# $(DX_MAKEINDEX) refman.idx; \
+# $(DX_PDFLATEX) refman.tex; \
+# countdown=5; \
+# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+# refman.log > /dev/null 2>&1 \
+# && test $$countdown -gt 0; do \
+# $(DX_PDFLATEX) refman.tex; \
+# countdown=`expr $$countdown - 1`; \
+# done; \
+# mv refman.pdf ../@PACKAGE@.pdf
+#
+# endif DX_COND_pdf
+#
+# ## ------------------------------------------------- ##
+# ## Rules specific for LaTeX (shared for PS and PDF). ##
+# ## ------------------------------------------------- ##
+#
+# if DX_COND_latex
+#
+# DX_CLEAN_LATEX = @DX_DOCDIR@/latex
+#
+# endif DX_COND_latex
+#
+# .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag
+#
+# doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+#
+# @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS)
+# rm -rf @DX_DOCDIR@
+# $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG)
+#
+# DX_CLEANFILES = \
+# @DX_DOCDIR@/@PACKAGE@.tag \
+# -r \
+# $(DX_CLEAN_HTML) \
+# $(DX_CLEAN_CHM) \
+# $(DX_CLEAN_CHI) \
+# $(DX_CLEAN_MAN) \
+# $(DX_CLEAN_RTF) \
+# $(DX_CLEAN_XML) \
+# $(DX_CLEAN_PS) \
+# $(DX_CLEAN_PDF) \
+# $(DX_CLEAN_LATEX)
+#
+# endif DX_COND_doc
+#
+# ----- end aminclude.am ---------------------------------------
+#
+# LICENSE
+#
+# Copyright (c) 2009 Oren Ben-Kiki <oren@ben-kiki.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+#serial 11
+
+
+DX_ENV=""
+AC_DEFUN([DX_FEATURE_doc], ON)
+AC_DEFUN([DX_FEATURE_dot], OFF)
+AC_DEFUN([DX_FEATURE_man], OFF)
+AC_DEFUN([DX_FEATURE_html], ON)
+AC_DEFUN([DX_FEATURE_chm], OFF)
+AC_DEFUN([DX_FEATURE_chi], OFF)
+AC_DEFUN([DX_FEATURE_rtf], OFF)
+AC_DEFUN([DX_FEATURE_xml], OFF)
+AC_DEFUN([DX_FEATURE_pdf], ON)
+AC_DEFUN([DX_FEATURE_ps], ON)
+
+
+# DX_ENV_APPEND(VARIABLE, VALUE)
+# ------------------------------
+# Append VARIABLE="VALUE" to DX_ENV for invoking doxygen.
+AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])])
+
+# DX_DIRNAME_EXPR
+# ---------------
+# Expand into a shell expression prints the directory part of a path.
+AC_DEFUN([DX_DIRNAME_EXPR],
+ [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']])
+
+# DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF)
+# -------------------------------------
+# Expands according to the M4 (static) status of the feature.
+AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])])
+
+# DX_REQUIRE_PROG(VARIABLE, PROGRAM)
+# ----------------------------------
+# Require the specified program to be found for the DX_CURRENT_FEATURE to work.
+AC_DEFUN([DX_REQUIRE_PROG], [
+AC_PATH_TOOL([$1], [$2])
+if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then
+ AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION])
+ AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0)
+fi
+])
+
+# DX_TEST_FEATURE(FEATURE)
+# ------------------------
+# Expand to a shell expression testing whether the feature is active.
+AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1])
+
+# DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE)
+# -------------------------------------------------
+# Verify that a required features has the right state before trying to turn on
+# the DX_CURRENT_FEATURE.
+AC_DEFUN([DX_CHECK_DEPEND], [
+test "$DX_FLAG_$1" = "$2" \
+|| AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1,
+ requires, contradicts) doxygen-DX_CURRENT_FEATURE])
+])
+
+# DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE)
+# ----------------------------------------------------------
+# Turn off the DX_CURRENT_FEATURE if the required feature is off.
+AC_DEFUN([DX_CLEAR_DEPEND], [
+test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0)
+])
+
+# DX_FEATURE_ARG(FEATURE, DESCRIPTION,
+# CHECK_DEPEND, CLEAR_DEPEND,
+# REQUIRE, DO-IF-ON, DO-IF-OFF)
+# --------------------------------------------
+# Parse the command-line option controlling a feature. CHECK_DEPEND is called
+# if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND),
+# otherwise CLEAR_DEPEND is called to turn off the default state if a required
+# feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional
+# requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and
+# DO-IF-ON or DO-IF-OFF are called according to the final state of the feature.
+AC_DEFUN([DX_ARG_ABLE], [
+ AC_DEFUN([DX_CURRENT_FEATURE], [$1])
+ AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2])
+ AC_ARG_ENABLE(doxygen-$1,
+ [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1],
+ [--enable-doxygen-$1]),
+ DX_IF_FEATURE([$1], [don't $2], [$2]))],
+ [
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ AC_SUBST([DX_FLAG_$1], 1)
+ $3
+;; #(
+n|N|no|No|NO)
+ AC_SUBST([DX_FLAG_$1], 0)
+;; #(
+*)
+ AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1])
+;;
+esac
+], [
+AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)])
+$4
+])
+if DX_TEST_FEATURE([$1]); then
+ $5
+ :
+fi
+if DX_TEST_FEATURE([$1]); then
+ AM_CONDITIONAL(DX_COND_$1, :)
+ $6
+ :
+else
+ AM_CONDITIONAL(DX_COND_$1, false)
+ $7
+ :
+fi
+])
+
+
+# DX_XXX_FEATURE(DEFAULT_STATE)
+# -----------------------------
+AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])])
+AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])])
+AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])])
+AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])])
+AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])])
+AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])])
+AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])])
+AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])])
+AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])])
+AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])])
+AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])])
+
+# DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR])
+# ---------------------------------------------------------
+# PROJECT also serves as the base name for the documentation files.
+# The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc".
+AC_DEFUN([DX_INIT_DOXYGEN], [
+
+# Files:
+AC_SUBST([DX_PROJECT], [$1])
+AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])])
+AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])])
+
+# Environment variables used inside doxygen.cfg:
+DX_ENV_APPEND(SRCDIR, $srcdir)
+DX_ENV_APPEND(PROJECT, $DX_PROJECT)
+DX_ENV_APPEND(DOCDIR, $DX_DOCDIR)
+DX_ENV_APPEND(VERSION, $PACKAGE_VERSION)
+
+# Doxygen itself:
+DX_ARG_ABLE(doc, [generate any doxygen documentation],
+ [],
+ [],
+ [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen)
+ DX_REQUIRE_PROG([DX_PERL], perl)],
+ [DX_ENV_APPEND(PERL_PATH, $DX_PERL)])
+
+# Dot for graphics:
+DX_ARG_ABLE(dot, [generate graphics for doxygen documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_DOT], dot)],
+ [DX_ENV_APPEND(HAVE_DOT, YES)
+ DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])],
+ [DX_ENV_APPEND(HAVE_DOT, NO)])
+
+# Man pages generation:
+DX_ARG_ABLE(man, [generate doxygen manual pages],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_MAN, YES)],
+ [DX_ENV_APPEND(GENERATE_MAN, NO)])
+
+# RTF file generation:
+DX_ARG_ABLE(rtf, [generate doxygen RTF documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_RTF, YES)],
+ [DX_ENV_APPEND(GENERATE_RTF, NO)])
+
+# XML file generation:
+DX_ARG_ABLE(xml, [generate doxygen XML documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_XML, YES)],
+ [DX_ENV_APPEND(GENERATE_XML, NO)])
+
+# (Compressed) HTML help generation:
+DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_HHC], hhc)],
+ [DX_ENV_APPEND(HHC_PATH, $DX_HHC)
+ DX_ENV_APPEND(GENERATE_HTML, YES)
+ DX_ENV_APPEND(GENERATE_HTMLHELP, YES)],
+ [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)])
+
+# Seperate CHI file generation.
+DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file],
+ [DX_CHECK_DEPEND(chm, 1)],
+ [DX_CLEAR_DEPEND(chm, 1)],
+ [],
+ [DX_ENV_APPEND(GENERATE_CHI, YES)],
+ [DX_ENV_APPEND(GENERATE_CHI, NO)])
+
+# Plain HTML pages generation:
+DX_ARG_ABLE(html, [generate doxygen plain HTML documentation],
+ [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)],
+ [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)],
+ [],
+ [DX_ENV_APPEND(GENERATE_HTML, YES)],
+ [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)])
+
+# PostScript file generation:
+DX_ARG_ABLE(ps, [generate doxygen PostScript documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_LATEX], latex)
+ DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex)
+ DX_REQUIRE_PROG([DX_DVIPS], dvips)
+ DX_REQUIRE_PROG([DX_EGREP], egrep)])
+
+# PDF file generation:
+DX_ARG_ABLE(pdf, [generate doxygen PDF documentation],
+ [DX_CHECK_DEPEND(doc, 1)],
+ [DX_CLEAR_DEPEND(doc, 1)],
+ [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex)
+ DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex)
+ DX_REQUIRE_PROG([DX_EGREP], egrep)])
+
+# LaTeX generation for PS and/or PDF:
+if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then
+ AM_CONDITIONAL(DX_COND_latex, :)
+ DX_ENV_APPEND(GENERATE_LATEX, YES)
+else
+ AM_CONDITIONAL(DX_COND_latex, false)
+ DX_ENV_APPEND(GENERATE_LATEX, NO)
+fi
+
+# Paper size for PS and/or PDF:
+AC_ARG_VAR(DOXYGEN_PAPER_SIZE,
+ [a4wide (default), a4, letter, legal or executive])
+case "$DOXYGEN_PAPER_SIZE" in
+#(
+"")
+ AC_SUBST(DOXYGEN_PAPER_SIZE, "")
+;; #(
+a4wide|a4|letter|legal|executive)
+ DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE)
+;; #(
+*)
+ AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'])
+;;
+esac
+
+#For debugging:
+#echo DX_FLAG_doc=$DX_FLAG_doc
+#echo DX_FLAG_dot=$DX_FLAG_dot
+#echo DX_FLAG_man=$DX_FLAG_man
+#echo DX_FLAG_html=$DX_FLAG_html
+#echo DX_FLAG_chm=$DX_FLAG_chm
+#echo DX_FLAG_chi=$DX_FLAG_chi
+#echo DX_FLAG_rtf=$DX_FLAG_rtf
+#echo DX_FLAG_xml=$DX_FLAG_xml
+#echo DX_FLAG_pdf=$DX_FLAG_pdf
+#echo DX_FLAG_ps=$DX_FLAG_ps
+#echo DX_ENV=$DX_ENV
+])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd* | netbsdelf*-gnu)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*) ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | gnu*)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ linux* | k*bsd*-gnu | gnu*)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ freebsd1*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+ [[If ld is used when linking, flag to hardcode $libdir into a binary
+ during linking. This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
+
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [pic_mode="$withval"],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3293 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4])
+m4_define([LT_PACKAGE_REVISION], [1.3293])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4'
+macro_revision='1.3293'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+#
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=m4_default([$1], [0.9.0])
+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ PKG_CONFIG=""
+ fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists. Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+ m4_default([$2], [:])
+m4_ifvaln([$3], [else
+ $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+ pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+ PKG_CHECK_EXISTS([$3],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes ],
+ [pkg_failed=yes])
+ else
+ pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+ AC_MSG_RESULT([no])
+ _PKG_SHORT_ERRORS_SUPPORTED
+ if test $_pkg_short_errors_supported = yes; then
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+ else
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+ m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+ ])
+elif test $pkg_failed = untried; then
+ AC_MSG_RESULT([no])
+ m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old. Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+ ])
+else
+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+ AC_MSG_RESULT([yes])
+ $3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
--- /dev/null
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_CFLAGS := -W -Wall -Werror -D_POSIX_C_SOURCE=200112
+
+LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)/../../
+
+# bionic /sys/types.h fails with -std=c++0x, as it doesn't include
+# stdint.h, but tries to use uint64_t.
+LOCAL_CPPFLAGS := -std=gnu++0x
+LOCAL_EXPORT_CPPFLAGS := -std=gnu++0x
+
+# libzipper throws exceptions
+LOCAL_CPPFLAGS += -fexceptions -frtti
+LOCAL_EXPORT_CPPFLAGS += -fexceptions -frtti
+
+LOCAL_CPP_EXTENSION := .cc
+
+LOCAL_LDLIBS := -lz
+LOCAL_EXPORT_LDLIBS := -lz
+
+LOCAL_MODULE := zipper
+LOCAL_MODULE_FILENAME := libzipper
+
+LOCAL_SRC_FILES :=\
+ ../../CompressedFile.cc \
+ ../../deflate.cc \
+ ../../gzip.cc \
+ ../../zip.cc \
+ ../../Compressor.cc \
+ ../../Exception.cc \
+ ../../Reader.cc \
+ ../../zipper.cc \
+ ../../Container.cc \
+ ../../FileReader.cc \
+ ../../Decompressor.cc \
+ ../../FileWriter.cc \
+ ../../Writer.cc \
+ ../../port/strerror_posix.cc \
+
+include $(BUILD_STATIC_LIBRARY)
--- /dev/null
+/* autoconfig.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
+ don't. */
+#undef HAVE_DECL_STRERROR_R
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror_r' function. */
+#undef HAVE_STRERROR_R
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
+/* Version number of package */
+#undef VERSION
--- /dev/null
+#!/bin/sh
+autoreconf --force --install
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
+
+timestamp='2011-05-11'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-tilera-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
+
+timestamp='2011-03-23'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | open8 \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile-* | tilegx-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ # This must be matched before tile*.
+ tilegx*)
+ basic_machine=tilegx-unknown
+ os=-linux-gnu
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for libzipper 1.0.3.
+#
+# Report bugs to <michael@codesrc.com>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: michael@codesrc.com about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libzipper'
+PACKAGE_TARNAME='libzipper'
+PACKAGE_VERSION='1.0.3'
+PACKAGE_STRING='libzipper 1.0.3'
+PACKAGE_BUGREPORT='michael@codesrc.com'
+PACKAGE_URL=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+ZLIB_LIBS
+ZLIB_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+DOXYGEN_PAPER_SIZE
+DX_COND_latex_FALSE
+DX_COND_latex_TRUE
+DX_COND_pdf_FALSE
+DX_COND_pdf_TRUE
+DX_PDFLATEX
+DX_FLAG_pdf
+DX_COND_ps_FALSE
+DX_COND_ps_TRUE
+DX_EGREP
+DX_DVIPS
+DX_MAKEINDEX
+DX_LATEX
+DX_FLAG_ps
+DX_COND_html_FALSE
+DX_COND_html_TRUE
+DX_FLAG_html
+DX_COND_chi_FALSE
+DX_COND_chi_TRUE
+DX_FLAG_chi
+DX_COND_chm_FALSE
+DX_COND_chm_TRUE
+DX_HHC
+DX_FLAG_chm
+DX_COND_xml_FALSE
+DX_COND_xml_TRUE
+DX_FLAG_xml
+DX_COND_rtf_FALSE
+DX_COND_rtf_TRUE
+DX_FLAG_rtf
+DX_COND_man_FALSE
+DX_COND_man_TRUE
+DX_FLAG_man
+DX_COND_dot_FALSE
+DX_COND_dot_TRUE
+DX_DOT
+DX_FLAG_dot
+DX_COND_doc_FALSE
+DX_COND_doc_TRUE
+DX_PERL
+DX_DOXYGEN
+DX_FLAG_doc
+DX_ENV
+DX_DOCDIR
+DX_CONFIG
+DX_PROJECT
+HAVE_GNU_STRERROR_FALSE
+HAVE_GNU_STRERROR_TRUE
+CXXCPP
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+ac_ct_CC
+CFLAGS
+CC
+LIBTOOL
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CXX
+CPPFLAGS
+LDFLAGS
+CXXFLAGS
+CXX
+libzipper_version
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_doxygen_doc
+enable_doxygen_dot
+enable_doxygen_man
+enable_doxygen_rtf
+enable_doxygen_xml
+enable_doxygen_chm
+enable_doxygen_chi
+enable_doxygen_html
+enable_doxygen_ps
+enable_doxygen_pdf
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CXX
+CXXFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CCC
+CC
+CFLAGS
+CPP
+CXXCPP
+DOXYGEN_PAPER_SIZE
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+ZLIB_CFLAGS
+ZLIB_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures libzipper 1.0.3 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/libzipper]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of libzipper 1.0.3:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --disable-doxygen-doc don't generate any doxygen documentation
+ --enable-doxygen-dot generate graphics for doxygen documentation
+ --enable-doxygen-man generate doxygen manual pages
+ --enable-doxygen-rtf generate doxygen RTF documentation
+ --enable-doxygen-xml generate doxygen XML documentation
+ --enable-doxygen-chm generate doxygen compressed HTML help documentation
+ --enable-doxygen-chi generate doxygen seperate compressed HTML help index
+ file
+ --disable-doxygen-html don't generate doxygen plain HTML documentation
+ --enable-doxygen-ps generate doxygen PostScript documentation
+ --enable-doxygen-pdf generate doxygen PDF documentation
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CC C compiler command
+ CFLAGS C compiler flags
+ CPP C preprocessor
+ CXXCPP C++ preprocessor
+ DOXYGEN_PAPER_SIZE
+ a4wide (default), a4, letter, legal or executive
+ PKG_CONFIG path to pkg-config utility
+ PKG_CONFIG_PATH
+ directories to add to pkg-config's search path
+ PKG_CONFIG_LIBDIR
+ path overriding pkg-config's built-in search path
+ ZLIB_CFLAGS C compiler flags for ZLIB, overriding pkg-config
+ ZLIB_LIBS linker flags for ZLIB, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <michael@codesrc.com>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+libzipper configure 1.0.3
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_cxx_check_decl LINENO SYMBOL VAR INCLUDES
+# -----------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_cxx_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ as_decl_name=`echo $2|sed 's/ *(.*//'`
+ as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+ (void) $as_decl_use;
+#else
+ (void) $as_decl_name;
+#endif
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_decl
+
+# ac_fn_cxx_check_func LINENO FUNC VAR
+# ------------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_cxx_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_func
+
+# ac_fn_cxx_try_run LINENO
+# ------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_cxx_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_run
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libzipper $as_me 1.0.3, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+am__api_version='1.11'
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libzipper'
+ VERSION='1.0.3'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+ac_config_headers="$ac_config_headers autoconfig.h"
+
+ac_config_files="$ac_config_files Makefile Doxyfile libzipper1.pc zipper.1"
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+libzipper_version=1.0.3
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5
+$as_echo_n "checking whether the C++ compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C++ compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5
+$as_echo_n "checking for C++ compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CXX" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4'
+macro_revision='1.3293'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+
+
+
+
+
+# Set options
+
+
+
+ enable_dlopen=no
+
+
+ enable_win32_dll=no
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ linux* | k*bsd*-gnu | gnu*)
+ link_all_deplibs=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ link_all_deplibs=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+CC="$lt_save_CC"
+
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+else
+ _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+ # save warnings/boilerplate of simple test code
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+ else
+ lt_prog_compiler_no_builtin_flag_CXX=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_CXX=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+ ld_shlibs_CXX=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds_CXX=''
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ file_list_spec_CXX='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct_CXX=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L_CXX=yes
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_libdir_separator_CXX=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec_CXX='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ always_export_symbols_CXX=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag_CXX="-z nodefs"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag_CXX=' ${wl}-bernotok'
+ allow_undefined_flag_CXX=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
+ archive_cmds_need_lc_CXX=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag_CXX=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX=' '
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=yes
+ file_list_spec_CXX='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+ enable_shared_with_static_runtimes_CXX=yes
+ # Don't use ranlib
+ old_postinstall_cmds_CXX='chmod 644 $oldlib'
+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
+ link_all_deplibs_CXX=yes
+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+
+ else
+ ld_shlibs_CXX=no
+ fi
+
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ freebsd[12]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ ld_shlibs_CXX=no
+ ;;
+
+ freebsd-elf*)
+ archive_cmds_need_lc_CXX=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ ld_shlibs_CXX=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+
+ hpux9*)
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_direct_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ ;;
+ *)
+ hardcode_direct_CXX=yes
+ hardcode_direct_absolute_CXX=yes
+ hardcode_minus_L_CXX=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+ ;;
+ esac
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+ inherit_rpath_CXX=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object_CXX=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ ld_shlibs_CXX=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ ld_shlibs_CXX=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ hardcode_direct_absolute_CXX=yes
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ allow_undefined_flag_CXX=' -expect_unresolved \*'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+ ;;
+ esac
+
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator_CXX=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ hardcode_libdir_flag_spec_CXX='-R$libdir'
+ hardcode_shlibpath_var_CXX=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ link_all_deplibs_CXX=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag_CXX='${wl}-z,text'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag_CXX='${wl}-z,text'
+ allow_undefined_flag_CXX='${wl}-z,nodefs'
+ archive_cmds_need_lc_CXX=no
+ hardcode_shlibpath_var_CXX=no
+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_separator_CXX=':'
+ link_all_deplibs_CXX=yes
+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
+ ;;
+ *)
+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+ ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+ test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+ GCC_CXX="$GXX"
+ LD_CXX="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$compiler_lib_search_path_CXX"; then
+ compiler_lib_search_path_CXX="${prev}${p}"
+ else
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$postdeps_CXX"; then
+ postdeps_CXX="${prev}${p}"
+ else
+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$predep_objects_CXX"; then
+ predep_objects_CXX="$p"
+ else
+ predep_objects_CXX="$predep_objects_CXX $p"
+ fi
+ else
+ if test -z "$postdep_objects_CXX"; then
+ postdep_objects_CXX="$p"
+ else
+ postdep_objects_CXX="$postdep_objects_CXX $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ predep_objects_CXX=
+ postdep_objects_CXX=
+ postdeps_CXX=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ postdeps_CXX='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic_CXX='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ lt_prog_compiler_pic_CXX=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic_CXX=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[4-9]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static_CXX='-Bstatic'
+ else
+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ lt_prog_compiler_pic_CXX='+Z'
+ fi
+ ;;
+ aCC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_static_CXX='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fPIC'
+ lt_prog_compiler_static_CXX='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-qpic'
+ lt_prog_compiler_static_CXX='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ lt_prog_compiler_pic_CXX='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd* | netbsdelf*-gnu)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic_CXX='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ lt_prog_compiler_wl_CXX='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ lt_prog_compiler_wl_CXX='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ lt_prog_compiler_wl_CXX='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ lt_prog_compiler_pic_CXX='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ lt_prog_compiler_pic_CXX='-pic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ lt_prog_compiler_pic_CXX='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ lt_prog_compiler_pic_CXX='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ lt_prog_compiler_can_build_shared_CXX=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic_CXX=
+ ;;
+ *)
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works_CXX=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works_CXX=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+ case $lt_prog_compiler_pic_CXX in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+ esac
+else
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works_CXX=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works_CXX=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+ :
+else
+ lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o_CXX=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o_CXX=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*) ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | gnu*)
+ link_all_deplibs_CXX=no
+ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc_CXX=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds_CXX in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+ test -n "$runpath_var_CXX" ||
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct_CXX" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+ test "$hardcode_minus_L_CXX" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action_CXX=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action_CXX=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink ||
+ test "$inherit_rpath_CXX" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+ac_fn_cxx_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strerror_r" = xyes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRERROR_R $ac_have_decl
+_ACEOF
+
+for ac_func in strerror_r
+do :
+ ac_fn_cxx_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r"
+if test "x$ac_cv_func_strerror_r" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_STRERROR_R 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5
+$as_echo_n "checking whether strerror_r returns char *... " >&6; }
+if ${ac_cv_func_strerror_r_char_p+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_cv_func_strerror_r_char_p=no
+ if test $ac_cv_have_decl_strerror_r = yes; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ char *p = strerror_r (0, buf, sizeof buf);
+ return !p || x;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_func_strerror_r_char_p=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ else
+ # strerror_r is not declared. Choose between
+ # systems that have relatively inaccessible declarations for the
+ # function. BeOS and DEC UNIX 4.0 fall in this category, but the
+ # former has a strerror_r that returns char*, while the latter
+ # has a strerror_r that returns `int'.
+ # This test should segfault on the DEC system.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ extern char *strerror_r ();
+int
+main ()
+{
+char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ return ! isalpha (x);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+ ac_cv_func_strerror_r_char_p=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5
+$as_echo "$ac_cv_func_strerror_r_char_p" >&6; }
+if test $ac_cv_func_strerror_r_char_p = yes; then
+
+$as_echo "#define STRERROR_R_CHAR_P 1" >>confdefs.h
+
+fi
+
+ if test x$ac_cv_func_strerror_r_char_p = xyes; then
+ HAVE_GNU_STRERROR_TRUE=
+ HAVE_GNU_STRERROR_FALSE='#'
+else
+ HAVE_GNU_STRERROR_TRUE='#'
+ HAVE_GNU_STRERROR_FALSE=
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Files:
+DX_PROJECT=libzipper
+
+DX_CONFIG=Doxyfile
+
+DX_DOCDIR=doc
+
+
+# Environment variables used inside doxygen.cfg:
+DX_ENV="$DX_ENV SRCDIR='$srcdir'"
+
+DX_ENV="$DX_ENV PROJECT='$DX_PROJECT'"
+
+DX_ENV="$DX_ENV DOCDIR='$DX_DOCDIR'"
+
+DX_ENV="$DX_ENV VERSION='$PACKAGE_VERSION'"
+
+
+# Doxygen itself:
+
+
+
+ # Check whether --enable-doxygen-doc was given.
+if test "${enable_doxygen_doc+set}" = set; then :
+ enableval=$enable_doxygen_doc;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_doc=1
+
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_doc=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-doc" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_doc=1
+
+
+
+fi
+
+if test "$DX_FLAG_doc" = 1; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}doxygen", so it can be a program name with args.
+set dummy ${ac_tool_prefix}doxygen; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_DOXYGEN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_DOXYGEN in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_DOXYGEN="$DX_DOXYGEN" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_DOXYGEN=$ac_cv_path_DX_DOXYGEN
+if test -n "$DX_DOXYGEN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOXYGEN" >&5
+$as_echo "$DX_DOXYGEN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_DOXYGEN"; then
+ ac_pt_DX_DOXYGEN=$DX_DOXYGEN
+ # Extract the first word of "doxygen", so it can be a program name with args.
+set dummy doxygen; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_DOXYGEN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_DOXYGEN in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_DOXYGEN="$ac_pt_DX_DOXYGEN" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_DOXYGEN=$ac_cv_path_ac_pt_DX_DOXYGEN
+if test -n "$ac_pt_DX_DOXYGEN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOXYGEN" >&5
+$as_echo "$ac_pt_DX_DOXYGEN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_DOXYGEN" = x; then
+ DX_DOXYGEN=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_DOXYGEN=$ac_pt_DX_DOXYGEN
+ fi
+else
+ DX_DOXYGEN="$ac_cv_path_DX_DOXYGEN"
+fi
+
+if test "$DX_FLAG_doc$DX_DOXYGEN" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: doxygen not found - will not generate any doxygen documentation" >&5
+$as_echo "$as_me: WARNING: doxygen not found - will not generate any doxygen documentation" >&2;}
+ DX_FLAG_doc=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}perl", so it can be a program name with args.
+set dummy ${ac_tool_prefix}perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_PERL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_PERL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_PERL="$DX_PERL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_PERL="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_PERL=$ac_cv_path_DX_PERL
+if test -n "$DX_PERL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PERL" >&5
+$as_echo "$DX_PERL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_PERL"; then
+ ac_pt_DX_PERL=$DX_PERL
+ # Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_PERL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_PERL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_PERL="$ac_pt_DX_PERL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_PERL="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_PERL=$ac_cv_path_ac_pt_DX_PERL
+if test -n "$ac_pt_DX_PERL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PERL" >&5
+$as_echo "$ac_pt_DX_PERL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_PERL" = x; then
+ DX_PERL=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_PERL=$ac_pt_DX_PERL
+ fi
+else
+ DX_PERL="$ac_cv_path_DX_PERL"
+fi
+
+if test "$DX_FLAG_doc$DX_PERL" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: perl not found - will not generate any doxygen documentation" >&5
+$as_echo "$as_me: WARNING: perl not found - will not generate any doxygen documentation" >&2;}
+ DX_FLAG_doc=0
+
+fi
+
+ :
+fi
+if test "$DX_FLAG_doc" = 1; then
+ if :; then
+ DX_COND_doc_TRUE=
+ DX_COND_doc_FALSE='#'
+else
+ DX_COND_doc_TRUE='#'
+ DX_COND_doc_FALSE=
+fi
+
+ DX_ENV="$DX_ENV PERL_PATH='$DX_PERL'"
+
+ :
+else
+ if false; then
+ DX_COND_doc_TRUE=
+ DX_COND_doc_FALSE='#'
+else
+ DX_COND_doc_TRUE='#'
+ DX_COND_doc_FALSE=
+fi
+
+
+ :
+fi
+
+
+# Dot for graphics:
+
+
+
+ # Check whether --enable-doxygen-dot was given.
+if test "${enable_doxygen_dot+set}" = set; then :
+ enableval=$enable_doxygen_dot;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_dot=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-dot requires doxygen-dot" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_dot=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-dot" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_dot=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_dot=0
+
+
+
+fi
+
+if test "$DX_FLAG_dot" = 1; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dot", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dot; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_DOT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_DOT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_DOT="$DX_DOT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_DOT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_DOT=$ac_cv_path_DX_DOT
+if test -n "$DX_DOT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DOT" >&5
+$as_echo "$DX_DOT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_DOT"; then
+ ac_pt_DX_DOT=$DX_DOT
+ # Extract the first word of "dot", so it can be a program name with args.
+set dummy dot; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_DOT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_DOT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_DOT="$ac_pt_DX_DOT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_DOT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_DOT=$ac_cv_path_ac_pt_DX_DOT
+if test -n "$ac_pt_DX_DOT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DOT" >&5
+$as_echo "$ac_pt_DX_DOT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_DOT" = x; then
+ DX_DOT=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_DOT=$ac_pt_DX_DOT
+ fi
+else
+ DX_DOT="$ac_cv_path_DX_DOT"
+fi
+
+if test "$DX_FLAG_dot$DX_DOT" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dot not found - will not generate graphics for doxygen documentation" >&5
+$as_echo "$as_me: WARNING: dot not found - will not generate graphics for doxygen documentation" >&2;}
+ DX_FLAG_dot=0
+
+fi
+
+ :
+fi
+if test "$DX_FLAG_dot" = 1; then
+ if :; then
+ DX_COND_dot_TRUE=
+ DX_COND_dot_FALSE='#'
+else
+ DX_COND_dot_TRUE='#'
+ DX_COND_dot_FALSE=
+fi
+
+ DX_ENV="$DX_ENV HAVE_DOT='YES'"
+
+ DX_ENV="$DX_ENV DOT_PATH='`expr ".$DX_DOT" : '\(\.\)[^/]*$' \| "x$DX_DOT" : 'x\(.*\)/[^/]*$'`'"
+
+ :
+else
+ if false; then
+ DX_COND_dot_TRUE=
+ DX_COND_dot_FALSE='#'
+else
+ DX_COND_dot_TRUE='#'
+ DX_COND_dot_FALSE=
+fi
+
+ DX_ENV="$DX_ENV HAVE_DOT='NO'"
+
+ :
+fi
+
+
+# Man pages generation:
+
+
+
+ # Check whether --enable-doxygen-man was given.
+if test "${enable_doxygen_man+set}" = set; then :
+ enableval=$enable_doxygen_man;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_man=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-man requires doxygen-man" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_man=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-man" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_man=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_man=0
+
+
+
+fi
+
+if test "$DX_FLAG_man" = 1; then
+
+ :
+fi
+if test "$DX_FLAG_man" = 1; then
+ if :; then
+ DX_COND_man_TRUE=
+ DX_COND_man_FALSE='#'
+else
+ DX_COND_man_TRUE='#'
+ DX_COND_man_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_MAN='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_man_TRUE=
+ DX_COND_man_FALSE='#'
+else
+ DX_COND_man_TRUE='#'
+ DX_COND_man_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_MAN='NO'"
+
+ :
+fi
+
+
+# RTF file generation:
+
+
+
+ # Check whether --enable-doxygen-rtf was given.
+if test "${enable_doxygen_rtf+set}" = set; then :
+ enableval=$enable_doxygen_rtf;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_rtf=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-rtf requires doxygen-rtf" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_rtf=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-rtf" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_rtf=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_rtf=0
+
+
+
+fi
+
+if test "$DX_FLAG_rtf" = 1; then
+
+ :
+fi
+if test "$DX_FLAG_rtf" = 1; then
+ if :; then
+ DX_COND_rtf_TRUE=
+ DX_COND_rtf_FALSE='#'
+else
+ DX_COND_rtf_TRUE='#'
+ DX_COND_rtf_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_RTF='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_rtf_TRUE=
+ DX_COND_rtf_FALSE='#'
+else
+ DX_COND_rtf_TRUE='#'
+ DX_COND_rtf_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_RTF='NO'"
+
+ :
+fi
+
+
+# XML file generation:
+
+
+
+ # Check whether --enable-doxygen-xml was given.
+if test "${enable_doxygen_xml+set}" = set; then :
+ enableval=$enable_doxygen_xml;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_xml=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-xml requires doxygen-xml" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_xml=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-xml" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_xml=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_xml=0
+
+
+
+fi
+
+if test "$DX_FLAG_xml" = 1; then
+
+ :
+fi
+if test "$DX_FLAG_xml" = 1; then
+ if :; then
+ DX_COND_xml_TRUE=
+ DX_COND_xml_FALSE='#'
+else
+ DX_COND_xml_TRUE='#'
+ DX_COND_xml_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_XML='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_xml_TRUE=
+ DX_COND_xml_FALSE='#'
+else
+ DX_COND_xml_TRUE='#'
+ DX_COND_xml_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_XML='NO'"
+
+ :
+fi
+
+
+# (Compressed) HTML help generation:
+
+
+
+ # Check whether --enable-doxygen-chm was given.
+if test "${enable_doxygen_chm+set}" = set; then :
+ enableval=$enable_doxygen_chm;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_chm=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-chm requires doxygen-chm" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_chm=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-chm" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_chm=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_chm=0
+
+
+
+fi
+
+if test "$DX_FLAG_chm" = 1; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}hhc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}hhc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_HHC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_HHC in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_HHC="$DX_HHC" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_HHC="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_HHC=$ac_cv_path_DX_HHC
+if test -n "$DX_HHC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_HHC" >&5
+$as_echo "$DX_HHC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_HHC"; then
+ ac_pt_DX_HHC=$DX_HHC
+ # Extract the first word of "hhc", so it can be a program name with args.
+set dummy hhc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_HHC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_HHC in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_HHC="$ac_pt_DX_HHC" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_HHC="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_HHC=$ac_cv_path_ac_pt_DX_HHC
+if test -n "$ac_pt_DX_HHC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_HHC" >&5
+$as_echo "$ac_pt_DX_HHC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_HHC" = x; then
+ DX_HHC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_HHC=$ac_pt_DX_HHC
+ fi
+else
+ DX_HHC="$ac_cv_path_DX_HHC"
+fi
+
+if test "$DX_FLAG_chm$DX_HHC" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&5
+$as_echo "$as_me: WARNING: hhc not found - will not generate doxygen compressed HTML help documentation" >&2;}
+ DX_FLAG_chm=0
+
+fi
+
+ :
+fi
+if test "$DX_FLAG_chm" = 1; then
+ if :; then
+ DX_COND_chm_TRUE=
+ DX_COND_chm_FALSE='#'
+else
+ DX_COND_chm_TRUE='#'
+ DX_COND_chm_FALSE=
+fi
+
+ DX_ENV="$DX_ENV HHC_PATH='$DX_HHC'"
+
+ DX_ENV="$DX_ENV GENERATE_HTML='YES'"
+
+ DX_ENV="$DX_ENV GENERATE_HTMLHELP='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_chm_TRUE=
+ DX_COND_chm_FALSE='#'
+else
+ DX_COND_chm_TRUE='#'
+ DX_COND_chm_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_HTMLHELP='NO'"
+
+ :
+fi
+
+
+# Seperate CHI file generation.
+
+
+
+ # Check whether --enable-doxygen-chi was given.
+if test "${enable_doxygen_chi+set}" = set; then :
+ enableval=$enable_doxygen_chi;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_chi=1
+
+
+test "$DX_FLAG_chm" = "1" \
+|| as_fn_error $? "doxygen-chi requires doxygen-chi" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_chi=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-chi" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_chi=0
+
+
+test "$DX_FLAG_chm" = "1" || DX_FLAG_chi=0
+
+
+
+fi
+
+if test "$DX_FLAG_chi" = 1; then
+
+ :
+fi
+if test "$DX_FLAG_chi" = 1; then
+ if :; then
+ DX_COND_chi_TRUE=
+ DX_COND_chi_FALSE='#'
+else
+ DX_COND_chi_TRUE='#'
+ DX_COND_chi_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_CHI='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_chi_TRUE=
+ DX_COND_chi_FALSE='#'
+else
+ DX_COND_chi_TRUE='#'
+ DX_COND_chi_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_CHI='NO'"
+
+ :
+fi
+
+
+# Plain HTML pages generation:
+
+
+
+ # Check whether --enable-doxygen-html was given.
+if test "${enable_doxygen_html+set}" = set; then :
+ enableval=$enable_doxygen_html;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_html=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-html requires doxygen-html" "$LINENO" 5
+
+test "$DX_FLAG_chm" = "0" \
+|| as_fn_error $? "doxygen-html contradicts doxygen-html" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_html=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-html" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_html=1
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_html=0
+
+
+test "$DX_FLAG_chm" = "0" || DX_FLAG_html=0
+
+
+
+fi
+
+if test "$DX_FLAG_html" = 1; then
+
+ :
+fi
+if test "$DX_FLAG_html" = 1; then
+ if :; then
+ DX_COND_html_TRUE=
+ DX_COND_html_FALSE='#'
+else
+ DX_COND_html_TRUE='#'
+ DX_COND_html_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_HTML='YES'"
+
+ :
+else
+ if false; then
+ DX_COND_html_TRUE=
+ DX_COND_html_FALSE='#'
+else
+ DX_COND_html_TRUE='#'
+ DX_COND_html_FALSE=
+fi
+
+ test "$DX_FLAG_chm" = 1 || DX_ENV="$DX_ENV GENERATE_HTML='NO'"
+
+ :
+fi
+
+
+# PostScript file generation:
+
+
+
+ # Check whether --enable-doxygen-ps was given.
+if test "${enable_doxygen_ps+set}" = set; then :
+ enableval=$enable_doxygen_ps;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_ps=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-ps requires doxygen-ps" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_ps=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-ps" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_ps=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_ps=0
+
+
+
+fi
+
+if test "$DX_FLAG_ps" = 1; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}latex", so it can be a program name with args.
+set dummy ${ac_tool_prefix}latex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_LATEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_LATEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_LATEX="$DX_LATEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_LATEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_LATEX=$ac_cv_path_DX_LATEX
+if test -n "$DX_LATEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_LATEX" >&5
+$as_echo "$DX_LATEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_LATEX"; then
+ ac_pt_DX_LATEX=$DX_LATEX
+ # Extract the first word of "latex", so it can be a program name with args.
+set dummy latex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_LATEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_LATEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_LATEX="$ac_pt_DX_LATEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_LATEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_LATEX=$ac_cv_path_ac_pt_DX_LATEX
+if test -n "$ac_pt_DX_LATEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_LATEX" >&5
+$as_echo "$ac_pt_DX_LATEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_LATEX" = x; then
+ DX_LATEX=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_LATEX=$ac_pt_DX_LATEX
+ fi
+else
+ DX_LATEX="$ac_cv_path_DX_LATEX"
+fi
+
+if test "$DX_FLAG_ps$DX_LATEX" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: latex not found - will not generate doxygen PostScript documentation" >&5
+$as_echo "$as_me: WARNING: latex not found - will not generate doxygen PostScript documentation" >&2;}
+ DX_FLAG_ps=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args.
+set dummy ${ac_tool_prefix}makeindex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_MAKEINDEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_MAKEINDEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX
+if test -n "$DX_MAKEINDEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5
+$as_echo "$DX_MAKEINDEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_MAKEINDEX"; then
+ ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX
+ # Extract the first word of "makeindex", so it can be a program name with args.
+set dummy makeindex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_MAKEINDEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX
+if test -n "$ac_pt_DX_MAKEINDEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5
+$as_echo "$ac_pt_DX_MAKEINDEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_MAKEINDEX" = x; then
+ DX_MAKEINDEX=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX
+ fi
+else
+ DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX"
+fi
+
+if test "$DX_FLAG_ps$DX_MAKEINDEX" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&5
+$as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PostScript documentation" >&2;}
+ DX_FLAG_ps=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dvips", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dvips; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_DVIPS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_DVIPS in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_DVIPS="$DX_DVIPS" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_DVIPS=$ac_cv_path_DX_DVIPS
+if test -n "$DX_DVIPS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_DVIPS" >&5
+$as_echo "$DX_DVIPS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_DVIPS"; then
+ ac_pt_DX_DVIPS=$DX_DVIPS
+ # Extract the first word of "dvips", so it can be a program name with args.
+set dummy dvips; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_DVIPS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_DVIPS in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_DVIPS="$ac_pt_DX_DVIPS" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_DVIPS="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_DVIPS=$ac_cv_path_ac_pt_DX_DVIPS
+if test -n "$ac_pt_DX_DVIPS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_DVIPS" >&5
+$as_echo "$ac_pt_DX_DVIPS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_DVIPS" = x; then
+ DX_DVIPS=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_DVIPS=$ac_pt_DX_DVIPS
+ fi
+else
+ DX_DVIPS="$ac_cv_path_DX_DVIPS"
+fi
+
+if test "$DX_FLAG_ps$DX_DVIPS" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&5
+$as_echo "$as_me: WARNING: dvips not found - will not generate doxygen PostScript documentation" >&2;}
+ DX_FLAG_ps=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args.
+set dummy ${ac_tool_prefix}egrep; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_EGREP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_EGREP=$ac_cv_path_DX_EGREP
+if test -n "$DX_EGREP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5
+$as_echo "$DX_EGREP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_EGREP"; then
+ ac_pt_DX_EGREP=$DX_EGREP
+ # Extract the first word of "egrep", so it can be a program name with args.
+set dummy egrep; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_EGREP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP
+if test -n "$ac_pt_DX_EGREP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5
+$as_echo "$ac_pt_DX_EGREP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_EGREP" = x; then
+ DX_EGREP=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_EGREP=$ac_pt_DX_EGREP
+ fi
+else
+ DX_EGREP="$ac_cv_path_DX_EGREP"
+fi
+
+if test "$DX_FLAG_ps$DX_EGREP" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&5
+$as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PostScript documentation" >&2;}
+ DX_FLAG_ps=0
+
+fi
+
+ :
+fi
+if test "$DX_FLAG_ps" = 1; then
+ if :; then
+ DX_COND_ps_TRUE=
+ DX_COND_ps_FALSE='#'
+else
+ DX_COND_ps_TRUE='#'
+ DX_COND_ps_FALSE=
+fi
+
+
+ :
+else
+ if false; then
+ DX_COND_ps_TRUE=
+ DX_COND_ps_FALSE='#'
+else
+ DX_COND_ps_TRUE='#'
+ DX_COND_ps_FALSE=
+fi
+
+
+ :
+fi
+
+
+# PDF file generation:
+
+
+
+ # Check whether --enable-doxygen-pdf was given.
+if test "${enable_doxygen_pdf+set}" = set; then :
+ enableval=$enable_doxygen_pdf;
+case "$enableval" in
+#(
+y|Y|yes|Yes|YES)
+ DX_FLAG_pdf=1
+
+
+test "$DX_FLAG_doc" = "1" \
+|| as_fn_error $? "doxygen-pdf requires doxygen-pdf" "$LINENO" 5
+
+;; #(
+n|N|no|No|NO)
+ DX_FLAG_pdf=0
+
+;; #(
+*)
+ as_fn_error $? "invalid value '$enableval' given to doxygen-pdf" "$LINENO" 5
+;;
+esac
+
+else
+
+DX_FLAG_pdf=0
+
+
+test "$DX_FLAG_doc" = "1" || DX_FLAG_pdf=0
+
+
+
+fi
+
+if test "$DX_FLAG_pdf" = 1; then
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pdflatex", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pdflatex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_PDFLATEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_PDFLATEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_PDFLATEX="$DX_PDFLATEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_PDFLATEX=$ac_cv_path_DX_PDFLATEX
+if test -n "$DX_PDFLATEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_PDFLATEX" >&5
+$as_echo "$DX_PDFLATEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_PDFLATEX"; then
+ ac_pt_DX_PDFLATEX=$DX_PDFLATEX
+ # Extract the first word of "pdflatex", so it can be a program name with args.
+set dummy pdflatex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_PDFLATEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_PDFLATEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_PDFLATEX="$ac_pt_DX_PDFLATEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_PDFLATEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_PDFLATEX=$ac_cv_path_ac_pt_DX_PDFLATEX
+if test -n "$ac_pt_DX_PDFLATEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_PDFLATEX" >&5
+$as_echo "$ac_pt_DX_PDFLATEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_PDFLATEX" = x; then
+ DX_PDFLATEX=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_PDFLATEX=$ac_pt_DX_PDFLATEX
+ fi
+else
+ DX_PDFLATEX="$ac_cv_path_DX_PDFLATEX"
+fi
+
+if test "$DX_FLAG_pdf$DX_PDFLATEX" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&5
+$as_echo "$as_me: WARNING: pdflatex not found - will not generate doxygen PDF documentation" >&2;}
+ DX_FLAG_pdf=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}makeindex", so it can be a program name with args.
+set dummy ${ac_tool_prefix}makeindex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_MAKEINDEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_MAKEINDEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_MAKEINDEX="$DX_MAKEINDEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_MAKEINDEX=$ac_cv_path_DX_MAKEINDEX
+if test -n "$DX_MAKEINDEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_MAKEINDEX" >&5
+$as_echo "$DX_MAKEINDEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_MAKEINDEX"; then
+ ac_pt_DX_MAKEINDEX=$DX_MAKEINDEX
+ # Extract the first word of "makeindex", so it can be a program name with args.
+set dummy makeindex; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_MAKEINDEX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_MAKEINDEX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_MAKEINDEX="$ac_pt_DX_MAKEINDEX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_MAKEINDEX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_MAKEINDEX=$ac_cv_path_ac_pt_DX_MAKEINDEX
+if test -n "$ac_pt_DX_MAKEINDEX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_MAKEINDEX" >&5
+$as_echo "$ac_pt_DX_MAKEINDEX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_MAKEINDEX" = x; then
+ DX_MAKEINDEX=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_MAKEINDEX=$ac_pt_DX_MAKEINDEX
+ fi
+else
+ DX_MAKEINDEX="$ac_cv_path_DX_MAKEINDEX"
+fi
+
+if test "$DX_FLAG_pdf$DX_MAKEINDEX" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&5
+$as_echo "$as_me: WARNING: makeindex not found - will not generate doxygen PDF documentation" >&2;}
+ DX_FLAG_pdf=0
+
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}egrep", so it can be a program name with args.
+set dummy ${ac_tool_prefix}egrep; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_DX_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DX_EGREP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DX_EGREP="$DX_EGREP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DX_EGREP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DX_EGREP=$ac_cv_path_DX_EGREP
+if test -n "$DX_EGREP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DX_EGREP" >&5
+$as_echo "$DX_EGREP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_DX_EGREP"; then
+ ac_pt_DX_EGREP=$DX_EGREP
+ # Extract the first word of "egrep", so it can be a program name with args.
+set dummy egrep; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_DX_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_DX_EGREP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_DX_EGREP="$ac_pt_DX_EGREP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_DX_EGREP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_DX_EGREP=$ac_cv_path_ac_pt_DX_EGREP
+if test -n "$ac_pt_DX_EGREP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_DX_EGREP" >&5
+$as_echo "$ac_pt_DX_EGREP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_DX_EGREP" = x; then
+ DX_EGREP=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DX_EGREP=$ac_pt_DX_EGREP
+ fi
+else
+ DX_EGREP="$ac_cv_path_DX_EGREP"
+fi
+
+if test "$DX_FLAG_pdf$DX_EGREP" = 1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: egrep not found - will not generate doxygen PDF documentation" >&5
+$as_echo "$as_me: WARNING: egrep not found - will not generate doxygen PDF documentation" >&2;}
+ DX_FLAG_pdf=0
+
+fi
+
+ :
+fi
+if test "$DX_FLAG_pdf" = 1; then
+ if :; then
+ DX_COND_pdf_TRUE=
+ DX_COND_pdf_FALSE='#'
+else
+ DX_COND_pdf_TRUE='#'
+ DX_COND_pdf_FALSE=
+fi
+
+
+ :
+else
+ if false; then
+ DX_COND_pdf_TRUE=
+ DX_COND_pdf_FALSE='#'
+else
+ DX_COND_pdf_TRUE='#'
+ DX_COND_pdf_FALSE=
+fi
+
+
+ :
+fi
+
+
+# LaTeX generation for PS and/or PDF:
+if test "$DX_FLAG_ps" = 1 || test "$DX_FLAG_pdf" = 1; then
+ if :; then
+ DX_COND_latex_TRUE=
+ DX_COND_latex_FALSE='#'
+else
+ DX_COND_latex_TRUE='#'
+ DX_COND_latex_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_LATEX='YES'"
+
+else
+ if false; then
+ DX_COND_latex_TRUE=
+ DX_COND_latex_FALSE='#'
+else
+ DX_COND_latex_TRUE='#'
+ DX_COND_latex_FALSE=
+fi
+
+ DX_ENV="$DX_ENV GENERATE_LATEX='NO'"
+
+fi
+
+# Paper size for PS and/or PDF:
+
+case "$DOXYGEN_PAPER_SIZE" in
+#(
+"")
+ DOXYGEN_PAPER_SIZE=""
+
+;; #(
+a4wide|a4|letter|legal|executive)
+ DX_ENV="$DX_ENV PAPER_SIZE='$DOXYGEN_PAPER_SIZE'"
+
+;; #(
+*)
+ as_fn_error $? "unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE'" "$LINENO" 5
+;;
+esac
+
+#For debugging:
+#echo DX_FLAG_doc=$DX_FLAG_doc
+#echo DX_FLAG_dot=$DX_FLAG_dot
+#echo DX_FLAG_man=$DX_FLAG_man
+#echo DX_FLAG_html=$DX_FLAG_html
+#echo DX_FLAG_chm=$DX_FLAG_chm
+#echo DX_FLAG_chi=$DX_FLAG_chi
+#echo DX_FLAG_rtf=$DX_FLAG_rtf
+#echo DX_FLAG_xml=$DX_FLAG_xml
+#echo DX_FLAG_pdf=$DX_FLAG_pdf
+#echo DX_FLAG_ps=$DX_FLAG_ps
+#echo DX_ENV=$DX_ENV
+
+
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+ PKG_CONFIG=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+ fi
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ PKG_CONFIG=""
+ fi
+fi
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ZLIB" >&5
+$as_echo_n "checking for ZLIB... " >&6; }
+
+if test -n "$ZLIB_CFLAGS"; then
+ pkg_cv_ZLIB_CFLAGS="$ZLIB_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"zlib >= 1.2.3\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "zlib >= 1.2.3") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_ZLIB_CFLAGS=`$PKG_CONFIG --cflags "zlib >= 1.2.3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$ZLIB_LIBS"; then
+ pkg_cv_ZLIB_LIBS="$ZLIB_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"zlib >= 1.2.3\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "zlib >= 1.2.3") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_ZLIB_LIBS=`$PKG_CONFIG --libs "zlib >= 1.2.3" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ ZLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "zlib >= 1.2.3" 2>&1`
+ else
+ ZLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "zlib >= 1.2.3" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$ZLIB_PKG_ERRORS" >&5
+
+ as_fn_error $? "zlib 1.2.3 or newer not found." "$LINENO" 5
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ as_fn_error $? "zlib 1.2.3 or newer not found." "$LINENO" 5
+
+else
+ ZLIB_CFLAGS=$pkg_cv_ZLIB_CFLAGS
+ ZLIB_LIBS=$pkg_cv_ZLIB_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+fi
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GNU_STRERROR_TRUE}" && test -z "${HAVE_GNU_STRERROR_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_GNU_STRERROR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_doc\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_doc_TRUE}" && test -z "${DX_COND_doc_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_doc\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_dot\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_dot_TRUE}" && test -z "${DX_COND_dot_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_dot\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_man\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_man_TRUE}" && test -z "${DX_COND_man_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_man\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_rtf\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_rtf_TRUE}" && test -z "${DX_COND_rtf_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_rtf\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_xml\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_xml_TRUE}" && test -z "${DX_COND_xml_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_xml\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_chm\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_chm_TRUE}" && test -z "${DX_COND_chm_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_chm\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_chi\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_chi_TRUE}" && test -z "${DX_COND_chi_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_chi\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_html\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_html_TRUE}" && test -z "${DX_COND_html_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_html\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_ps\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_ps_TRUE}" && test -z "${DX_COND_ps_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_ps\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_pdf\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_pdf_TRUE}" && test -z "${DX_COND_pdf_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_pdf\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_latex\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DX_COND_latex_TRUE}" && test -z "${DX_COND_latex_FALSE}"; then
+ as_fn_error $? "conditional \"DX_COND_latex\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libzipper $as_me 1.0.3, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <michael@codesrc.com>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libzipper config.status 1.0.3
+configured by $0, generated by GNU Autoconf 2.68,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_ld_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "autoconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS autoconfig.h" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;;
+ "libzipper1.pc") CONFIG_FILES="$CONFIG_FILES libzipper1.pc" ;;
+ "zipper.1") CONFIG_FILES="$CONFIG_FILES zipper.1" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = "\a"
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="CXX "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
--- /dev/null
+# Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+#
+# This file is part of libzipper.
+#
+# libzipper is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# libzipper is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+AC_INIT([libzipper], m4_esyscmd_s([cat VERSION]), [michael@codesrc.com])
+AC_CANONICAL_HOST
+AC_CANONICAL_TARGET
+AM_INIT_AUTOMAKE([foreign])
+AC_CONFIG_HEADERS([autoconfig.h])
+AC_CONFIG_FILES([Makefile Doxyfile libzipper1.pc zipper.1])
+
+AM_MAINTAINER_MODE
+
+AC_SUBST([libzipper_version], m4_esyscmd_s([cat VERSION]))
+
+AC_PROG_CXX
+AC_LANG([C++])
+AM_PROG_LIBTOOL
+
+AC_FUNC_STRERROR_R
+AM_CONDITIONAL(HAVE_GNU_STRERROR,[test x$ac_cv_func_strerror_r_char_p = xyes])
+
+DX_DOXYGEN_FEATURE([ON])
+DX_HTML_FEATURE([ON])
+DX_CHM_FEATURE(OFF)
+DX_CHI_FEATURE(OFF)
+DX_MAN_FEATURE(OFF)
+DX_RTF_FEATURE(OFF)
+DX_XML_FEATURE(OFF)
+DX_PDF_FEATURE(OFF)
+DX_PS_FEATURE(OFF)
+
+DX_INIT_DOXYGEN([libzipper], [Doxyfile], [doc])
+
+PKG_CHECK_MODULES([ZLIB], [zlib >= 1.2.3],,
+ AC_MSG_ERROR([zlib 1.2.3 or newer not found.])
+)
+
+AC_OUTPUT
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "deflate.hh"
+#include "util.hh"
+
+#include <zlib.h>
+
+#include <cassert>
+#include <iostream>
+
+using namespace zipper;
+
+namespace
+{
+ struct DeflateDeleter
+ {
+ public:
+ DeflateDeleter(z_stream* stream) : m_stream(stream) {}
+ ~DeflateDeleter()
+ {
+ deflateEnd(m_stream);
+
+ }
+ private:
+ z_stream* m_stream;
+ };
+
+ struct InflateDeleter
+ {
+ public:
+ InflateDeleter(z_stream* stream) : m_stream(stream) {}
+ ~InflateDeleter()
+ {
+ inflateEnd(m_stream);
+
+ }
+ private:
+ z_stream* m_stream;
+ };
+
+ enum Constants
+ {
+ ChunkSize = 64*1024,
+ WindowBits = 15
+ };
+}
+
+void
+zipper::deflate(
+ const Reader& reader,
+ const WriterPtr& writer,
+ zsize_t& writeOffset,
+ zsize_t& uncompressedSize,
+ zsize_t& compressedSize,
+ uint32_t& crc)
+{
+ uint8_t inChunk[ChunkSize];
+ uint8_t outChunk[ChunkSize];
+
+ uncompressedSize = 0;
+ compressedSize = 0;
+
+ z_stream stream;
+ stream.zalloc = NULL;
+ stream.zfree = NULL;
+ stream.opaque = NULL;
+ int zlibErr(
+ deflateInit2(
+ &stream,
+ Z_DEFAULT_COMPRESSION,
+ Z_DEFLATED,
+ -WindowBits,
+ MAX_MEM_LEVEL,
+ Z_DEFAULT_STRATEGY)
+ );
+
+ assert(zlibErr == Z_OK);
+ DeflateDeleter deleter(&stream);
+ stream.next_in = NULL;
+ stream.avail_in = 0;
+ bool finished(false);
+
+ zsize_t pos(0);
+ zsize_t end(reader.getSize());
+ crc = crc32(0, NULL, 0);
+
+ while (!finished)
+ {
+ if ((stream.avail_in == 0) && (pos < end))
+ {
+ stream.avail_in =
+ std::min(zsize_t(ChunkSize), end - pos);
+ reader.readData(
+ pos, stream.avail_in, &inChunk[0]);
+ stream.next_in = reinterpret_cast<Bytef*>(&inChunk);
+ pos += stream.avail_in;
+ uncompressedSize += stream.avail_in;
+ crc = crc32(crc, stream.next_in, stream.avail_in);
+ }
+
+ stream.next_out = reinterpret_cast<Bytef*>(&outChunk);
+ stream.avail_out = sizeof(outChunk);
+
+ finished = false;
+ zlibErr = deflate(&stream, (pos < end) ? Z_NO_FLUSH : Z_FINISH);
+
+ if (zlibErr == Z_STREAM_END)
+ {
+ if (pos < end)
+ {
+ assert(!"zlib buffer unexpectedly empty");
+ std::terminate();
+ }
+ finished = true;
+ }
+ else if (zlibErr != Z_OK)
+ {
+ throw FormatException("Corrupt Data");
+ }
+
+ zsize_t bytesToWrite(sizeof(outChunk) - stream.avail_out);
+ writer->writeData(writeOffset, bytesToWrite, &outChunk[0]);
+ writeOffset += bytesToWrite;
+ compressedSize += bytesToWrite;
+ }
+}
+
+
+void
+zipper::inflate(
+ const ReaderPtr& reader,
+ Writer& writer,
+ zsize_t& readOffset,
+ zsize_t readEnd,
+ zsize_t& writeOffset,
+ uint32_t& crc)
+{
+ uint8_t inChunk[ChunkSize];
+ uint8_t outChunk[ChunkSize];
+
+ z_stream stream;
+ stream.zalloc = NULL;
+ stream.zfree = NULL;
+ stream.opaque = NULL;
+ int zlibErr(inflateInit2(&stream, -WindowBits));
+ assert(zlibErr == Z_OK);
+ InflateDeleter deleter(&stream);
+ stream.next_in = NULL;
+ stream.avail_in = 0;
+ bool finished(false);
+
+ zsize_t pos(readOffset);
+ crc = crc32(0, NULL, 0);
+ while (!finished)
+ {
+ if (stream.avail_in == 0)
+ {
+ stream.avail_in = std::min(zsize_t(ChunkSize), readEnd - pos);
+ if (stream.avail_in == 0)
+ {
+ break;
+ }
+ reader->readData(pos, stream.avail_in, &inChunk[0]);
+ stream.next_in = reinterpret_cast<Bytef*>(&inChunk);
+ pos += stream.avail_in;
+ }
+
+ stream.next_out = reinterpret_cast<Bytef*>(&outChunk);
+ stream.avail_out = sizeof(outChunk);
+
+ zlibErr = inflate(&stream, Z_SYNC_FLUSH);
+
+ finished = false;
+ if (zlibErr == Z_STREAM_END)
+ {
+ finished = true;
+ }
+ else if (zlibErr != Z_OK)
+ {
+ throw FormatException("Corrupt Data");
+ }
+
+ zsize_t bytesToWrite(sizeof(outChunk) - stream.avail_out);
+ writer.writeData(writeOffset, bytesToWrite, &outChunk[0]);
+ writeOffset += bytesToWrite;
+ crc = crc32(crc, &outChunk[0], bytesToWrite);
+ }
+ if (!finished)
+ {
+ // Ran out of data to process
+ throw FormatException("Corrupt Data");
+ }
+
+ // We've read data that wasn't consumed!
+ readOffset = pos - stream.avail_in;
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+#include <vector>
+
+namespace zipper
+{
+ void deflate(
+ const Reader& reader,
+ const WriterPtr& writer,
+ zsize_t& writeOffset,
+ zsize_t& uncompressedSize,
+ zsize_t& compressedSize,
+ uint32_t& crc);
+
+ void inflate(
+ const ReaderPtr& reader,
+ Writer& writer,
+ zsize_t& readOffset,
+ zsize_t readEnd,
+ zsize_t& writeOffset,
+ uint32_t& crc);
+}
+
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+## --------------------------------- ##
+## Format-independent Doxygen rules. ##
+## --------------------------------- ##
+
+DOXYGEN_INSTALL=
+
+if DX_COND_doc
+
+## ------------------------------- ##
+## Rules specific for HTML output. ##
+## ------------------------------- ##
+
+if DX_COND_html
+
+DX_CLEAN_HTML = @DX_DOCDIR@/html
+
+doxygen-install-html:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/html; \
+ $(INSTALL_DATA) @DX_DOCDIR@/html/* $(DESTDIR)$(docdir)/html;
+
+DOXYGEN_INSTALL+= doxygen-install-html
+
+endif DX_COND_html
+
+## ------------------------------ ##
+## Rules specific for CHM output. ##
+## ------------------------------ ##
+
+if DX_COND_chm
+
+DX_CLEAN_CHM = @DX_DOCDIR@/chm
+
+if DX_COND_chi
+
+DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi
+
+endif DX_COND_chi
+
+doxygen-install-chm:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/chm; \
+ $(INSTALL_DATA) @DX_DOCDIR@/chm/* $(DESTDIR)$(docdir)/chm;
+
+DOXYGEN_INSTALL+= doxygen-install-chm
+
+endif DX_COND_chm
+
+## ------------------------------ ##
+## Rules specific for MAN output. ##
+## ------------------------------ ##
+
+if DX_COND_man
+
+DX_CLEAN_MAN = @DX_DOCDIR@/man
+
+doxygen-install-man:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/man; \
+ $(INSTALL_DATA) @DX_DOCDIR@/man/* $(DESTDIR)$(docdir)/man;
+
+DOXYGEN_INSTALL+= doxygen-install-man
+endif DX_COND_man
+
+## ------------------------------ ##
+## Rules specific for RTF output. ##
+## ------------------------------ ##
+
+if DX_COND_rtf
+
+DX_CLEAN_RTF = @DX_DOCDIR@/rtf
+
+doxygen-install-rtf:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/rtf; \
+ $(INSTALL_DATA) @DX_DOCDIR@/rtf/* $(DESTDIR)$(docdir)/rtf;
+
+DOXYGEN_INSTALL+= doxygen-install-rtf
+endif DX_COND_rtf
+
+## ------------------------------ ##
+## Rules specific for XML output. ##
+## ------------------------------ ##
+
+if DX_COND_xml
+
+DX_CLEAN_XML = @DX_DOCDIR@/xml
+
+doxygen-install-xml:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/xml; \
+ $(INSTALL_DATA) @DX_DOCDIR@/xml/* $(DESTDIR)$(docdir)/xml;
+
+DOXYGEN_INSTALL+= doxygen-install-xml
+
+endif DX_COND_xml
+
+## ----------------------------- ##
+## Rules specific for PS output. ##
+## ----------------------------- ##
+
+if DX_COND_ps
+
+DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps
+
+DX_PS_GOAL = doxygen-ps
+
+doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps
+
+@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag
+ cd @DX_DOCDIR@/latex; \
+ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+ $(DX_LATEX) refman.tex; \
+ $(MAKEINDEX_PATH) refman.idx; \
+ $(DX_LATEX) refman.tex; \
+ countdown=5; \
+ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+ refman.log > /dev/null 2>&1 \
+ && test $$countdown -gt 0; do \
+ $(DX_LATEX) refman.tex; \
+ countdown=`expr $$countdown - 1`; \
+ done; \
+ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi
+
+doxygen-install-ps:
+ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.ps $(DESTDIR)$(docdir);
+
+DOXYGEN_INSTALL+= doxygen-install-ps
+endif DX_COND_ps
+
+## ------------------------------ ##
+## Rules specific for PDF output. ##
+## ------------------------------ ##
+
+if DX_COND_pdf
+
+DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf
+
+DX_PDF_GOAL = doxygen-pdf
+
+doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf
+
+@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag
+ cd @DX_DOCDIR@/latex; \
+ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \
+ $(DX_PDFLATEX) refman.tex; \
+ $(DX_MAKEINDEX) refman.idx; \
+ $(DX_PDFLATEX) refman.tex; \
+ countdown=5; \
+ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \
+ refman.log > /dev/null 2>&1 \
+ && test $$countdown -gt 0; do \
+ $(DX_PDFLATEX) refman.tex; \
+ countdown=`expr $$countdown - 1`; \
+ done; \
+ mv refman.pdf ../@PACKAGE@.pdf
+
+doxygen-install-pdf:
+ $(INSTALL_DATA) @DX_DOCDIR@/@PACKAGE@.pdf $(DESTDIR)$(docdir);
+
+DOXYGEN_INSTALL+= doxygen-install-pdf
+endif DX_COND_pdf
+
+## ------------------------------------------------- ##
+## Rules specific for LaTeX (shared for PS and PDF). ##
+## ------------------------------------------------- ##
+
+if DX_COND_latex
+
+DX_CLEAN_LATEX = @DX_DOCDIR@/latex
+
+doxygen-install-latex:
+ $(INSTALL) -d $(DESTDIR)$(docdir)/latex; \
+ $(INSTALL_DATA) @DX_DOCDIR@/latex/* $(DESTDIR)$(docdir)/latex;
+
+DOXYGEN_INSTALL+= doxygen-install-latex
+endif DX_COND_latex
+
+.PHONY: doxygen-run doxygen-doc doxygen-install $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag
+
+doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL)
+
+doxygen-install: $(DOXYGEN_INSTALL)
+
+@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS)
+ rm -rf @DX_DOCDIR@
+ $(DX_ENV) $(DX_DOXYGEN) $(DX_CONFIG)
+
+DX_CLEANFILES = \
+ @DX_DOCDIR@/@PACKAGE@.tag \
+ -r \
+ $(DX_CLEAN_HTML) \
+ $(DX_CLEAN_CHM) \
+ $(DX_CLEAN_CHI) \
+ $(DX_CLEAN_MAN) \
+ $(DX_CLEAN_RTF) \
+ $(DX_CLEAN_XML) \
+ $(DX_CLEAN_PS) \
+ $(DX_CLEAN_PDF) \
+ $(DX_CLEAN_LATEX)
+
+endif DX_COND_doc
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "gzip.hh"
+#include "util.hh"
+#include "deflate.hh"
+
+#include <algorithm>
+#include <cassert>
+#include <iostream>
+#include <vector>
+
+#include <string.h>
+
+using namespace zipper;
+
+namespace
+{
+ size_t
+ findNull(const std::vector<uint8_t>& zipData, size_t start)
+ {
+ if (start >= zipData.size())
+ {
+ throw FormatException("Unexpected end-of-file");
+ }
+
+ while (zipData[start] != 0)
+ {
+ ++start;
+ if (start >= zipData.size())
+ {
+ throw FormatException("Unexpected end-of-file");
+ }
+ }
+ return start;
+ }
+
+ class FileEntry : public CompressedFile
+ {
+ public:
+ FileEntry(
+ const ReaderPtr& reader,
+ zsize_t dataOffset,
+ const std::string& filename,
+ time_t modTime
+ ) :
+ m_reader(reader),
+ m_dataOffset(dataOffset),
+ m_fileName(filename)
+ {
+ m_modTime.tv_sec = modTime;
+ m_modTime.tv_usec = 0;
+ }
+
+ virtual bool isDecompressSupported() const
+ {
+ return true;
+ }
+
+ virtual const std::string& getPath() const
+ {
+ return m_fileName;
+ }
+
+ virtual zsize_t getCompressedSize() const { return -1; }
+ virtual zsize_t getUncompressedSize() const { return -1; }
+ virtual const timeval& getModificationTime() const { return m_modTime; }
+
+ virtual void decompress(Writer& writer)
+ {
+ zsize_t endCompressedBytes = m_reader->getSize() - 8; // CRC+ISIZE
+ zsize_t inPos(m_dataOffset);
+ zsize_t outPos(0);
+ uint32_t crc(0);
+ inflate(
+ m_reader,
+ writer,
+ inPos,
+ endCompressedBytes,
+ outPos,
+ crc);
+
+ uint8_t crcBuffer[4];
+ m_reader->readData(inPos, sizeof(crcBuffer), &crcBuffer[0]);
+ uint32_t savedCRC = read32_le(&crcBuffer[0]);
+ if (savedCRC != crc)
+ {
+ throw FormatException("Corrupt Data (CRC Failure)");
+ }
+ }
+
+ private:
+ ReaderPtr m_reader;
+ zsize_t m_dataOffset;
+ std::string m_fileName;
+ timeval m_modTime;
+ };
+}
+
+std::vector<zipper::CompressedFilePtr>
+zipper::ungzip(const ReaderPtr& reader)
+{
+ enum
+ {
+ MaxHeader = 64*1024 // Artifical limit to simplify code
+ };
+
+ if (!isGzip(reader))
+ {
+ throw FormatException("Invalid gzip file");
+ }
+
+ std::vector<uint8_t> header(
+ std::min(reader->getSize(), zsize_t(MaxHeader)));
+ reader->readData(0, header.size(), &header[0]);
+
+ if (header[2] != 8) // "deflate" method
+ {
+ throw UnsupportedException("Unknown gzip compression method");
+ }
+
+ bool fextra = (header[3] & 4) != 0;
+ bool fname = (header[3] & 8) != 0;
+ bool fcomment = (header[3] & 0x10) != 0;
+ bool fhcrc = (header[3] & 2) != 0;
+
+ time_t modTime = read32_le(&header[4]);
+
+ size_t offset(10);
+
+ if (fextra)
+ {
+ if (offset + 2 > header.size())
+ {
+ throw FormatException("Unexpected end-of-file");
+ }
+ uint16_t fextraBytes(read16_le(header, offset));
+ offset += 2;
+
+ offset += fextraBytes;
+ }
+
+ std::string embeddedName(reader->getSourceName());
+ if (fname)
+ {
+ size_t nullOffset(findNull(header, offset));
+ embeddedName =
+ std::string(
+ reinterpret_cast<char*>(&header[offset]), nullOffset - offset);
+ offset = nullOffset + 1;
+ }
+
+ if (fcomment)
+ {
+ size_t nullOffset(findNull(header, offset));
+ offset = nullOffset + 1;
+ }
+
+ if (fhcrc)
+ {
+ offset += 2;
+ }
+
+ if (offset >= header.size())
+ {
+ throw FormatException("Unexpected end-of-file");
+ }
+
+ std::vector<CompressedFilePtr> result;
+ result.push_back(
+ CompressedFilePtr(
+ new FileEntry(reader, offset, embeddedName, modTime)));
+
+ return result;
+}
+
+bool
+zipper::isGzip(const ReaderPtr& reader)
+{
+ enum Constants
+ {
+ MinFileBytes = 18, // Header + CRC + size
+ ID1 = 0x1f,
+ ID2 = 0x8b
+ };
+
+ bool isGzip(false);
+ if (reader->getSize() >= MinFileBytes)
+ {
+ uint8_t magic[2];
+ reader->readData(0, sizeof(magic), &magic[0]);
+ isGzip = (magic[0] == ID1) && (magic[1] == ID2);
+ }
+ return isGzip;
+}
+
+void
+zipper::gzip(
+ const std::string& filename,
+ const Reader& reader,
+ const WriterPtr& writer)
+{
+ enum Constants
+ {
+ ChunkSize = 64*1024,
+ WindowBits = 15
+ };
+
+ static uint8_t Header[] =
+ {
+ 0x1f, 0x8b, // ID
+ 0x08, // deflate
+ 0x8, // Flags (filename set)
+ 0x0, 0x0, 0x0, 0x0, // mtime
+ 0x0, // Extra flags
+ 0xff // OS
+ };
+
+ zsize_t outPos(writer->getSize());
+
+ // Write header
+ {
+ uint8_t buffer[ChunkSize];
+ memcpy(buffer, Header, sizeof(Header));
+
+ write32_le(reader.getModTime().tv_sec, &buffer[4]); // modtime
+
+ zsize_t pos(sizeof(Header));
+
+ zsize_t filenameSize(filename.size());
+ if (filenameSize > (ChunkSize - pos - 1))
+ {
+ filenameSize = ChunkSize - pos - 1;
+ }
+ std::copy(&filename[0], &filename[filenameSize], &buffer[pos]);
+ pos += filenameSize;
+ buffer[pos++] = '\0';
+
+ writer->writeData(outPos, pos, &buffer[0]);
+ outPos += pos;
+ }
+
+ // Compress data
+ zsize_t uncompressedSize(0);
+ zsize_t compressedSize(0);
+ uint32_t crc(0);
+ deflate(reader, writer, outPos, uncompressedSize, compressedSize, crc);
+
+ // Write trailer.
+ uint8_t trailer[8];
+ write32_le(crc, &trailer[0]);
+ write32_le(reader.getSize(), &trailer[4]);
+ writer->writeData(outPos, sizeof(trailer), &trailer[0]);
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+#include <vector>
+
+namespace zipper
+{
+ bool isGzip(const ReaderPtr& reader);
+
+ void gzip(
+ const std::string& filename,
+ const Reader& reader,
+ const WriterPtr& writer);
+
+ std::vector<CompressedFilePtr> ungzip(const ReaderPtr& reader);
+}
+
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: libzipper
+Description: libzipper offers a flexible C++ interface for reading compressed files in multiple formats.
+Requires: zlib
+Version: @libzipper_version@
+Libs: -L${libdir} -lzipper
+Cflags: -I${includedir}
--- /dev/null
+
+# libtool (GNU libtool) 2.4
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4 Debian-2.4-4
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION="2.4 Debian-2.4-4"
+TIMESTAMP=""
+package_revision=1.3293
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
+
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link)
+ libs="$deplibs %DEPLIBS%"
+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ *)
+ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_apped perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar*)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar*)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#define _GNU_SOURCE
+
+#include "../strerror.hh"
+
+#include <string.h>
+
+using namespace zipper;
+
+std::string
+zipper::strerror(int errnum)
+{
+ char buf[1024];
+ const char* message(NULL);
+
+ // The GNU-specific strerror_r may use the provided buffer, OR a static
+ // buffer.
+ message = strerror_r(errnum, buf, sizeof(buf));
+
+ return std::string(message);
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "../strerror.hh"
+
+#include <string.h>
+
+using namespace zipper;
+
+std::string
+zipper::strerror(int errnum)
+{
+ char buf[1024];
+ const char* message(NULL);
+
+#if (_POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600)
+ int error(strerror_r(errnum, buf, sizeof(buf)));
+ if (error != 0)
+ {
+ message = "Unknown error";
+ }
+#else
+ // Thread-unsafe fallback
+ message = ::strerror(errnum);
+#endif
+
+ return std::string(message);
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#ifndef zipper_split_hh
+#define zipper_split_hh
+
+#include <string>
+
+namespace zipper
+{
+
+ template<typename OutputIterator>
+ void
+ split(const std::string& in, char delim, OutputIterator out)
+ {
+ std::string::size_type start(0);
+ std::string::size_type pos(0);
+ while (pos < in.size())
+ {
+ if (in[pos] == delim)
+ {
+ if (pos != start)
+ {
+ *out = in.substr(start, pos - start);
+ ++out;
+ }
+ ++pos;
+ start = pos;
+ }
+ else
+ {
+ ++pos;
+ }
+ }
+
+ if (pos != start)
+ {
+ *out = in.substr(start, pos - start);
+ ++out;
+ }
+ }
+}
+
+#endif
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#ifndef zipper_strerror_hh
+#define zipper_strerror_hh
+
+#include <string>
+
+namespace zipper
+{
+
+ std::string strerror(int errnum);
+}
+
+#endif
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#ifndef zipper_util_hh
+#define zipper_util_hh
+
+namespace zipper
+{
+ template <typename T>
+ struct
+ dummy_delete
+ {
+ void operator()(T*) {}
+ };
+
+ template<typename T>
+ uint32_t
+ read32_le(const T& inArray, size_t pos = 0)
+ {
+ // Read 4 bytes in little-endian order.
+ // Return results in host-endian.
+ return uint32_t(
+ inArray[pos] |
+ (uint32_t(inArray[pos+1]) << 8) |
+ (uint32_t(inArray[pos+2]) << 16) |
+ (uint32_t(inArray[pos+3]) << 24)
+ );
+ }
+
+ template<typename T>
+ uint16_t
+ read16_le(const T& inArray, size_t pos = 0)
+ {
+ // Read 2 bytes in little-endian order.
+ // Return results in host-endian.
+ return uint16_t(
+ inArray[pos] |
+ (uint16_t(inArray[pos+1]) << 8)
+ );
+ }
+
+ template<typename T>
+ void
+ write32_le(uint32_t value, T& outArray, size_t pos = 0)
+ {
+ // Write 4 bytes in little-endian order.
+ outArray[pos] = value & 0xff;
+ outArray[pos + 1] = (value >> 8) & 0xff;
+ outArray[pos + 2] = (value >> 16) & 0xff;
+ outArray[pos + 3] = (value >> 24) & 0xff;
+ }
+
+ template<typename T>
+ void
+ write32_le(uint32_t value, T* outArray, size_t pos = 0)
+ {
+ // Write 4 bytes in little-endian order.
+ outArray[pos] = value & 0xff;
+ outArray[pos + 1] = (value >> 8) & 0xff;
+ outArray[pos + 2] = (value >> 16) & 0xff;
+ outArray[pos + 3] = (value >> 24) & 0xff;
+ }
+
+ template<typename T>
+ void
+ write16_le(uint16_t value, T& outArray, size_t pos = 0)
+ {
+ // Write 4 bytes in little-endian order.
+ outArray[pos] = value & 0xff;
+ outArray[pos + 1] = (value >> 8);
+ }
+
+ template<typename T>
+ void
+ write16_le(uint16_t value, T* outArray, size_t pos = 0)
+ {
+ // Write 4 bytes in little-endian order.
+ outArray[pos] = value & 0xff;
+ outArray[pos + 1] = (value >> 8);
+ }
+}
+
+#endif
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "zip.hh"
+#include "util.hh"
+#include "deflate.hh"
+
+
+#include <algorithm>
+#include <cassert>
+#include <iostream>
+
+#include <time.h>
+#include <string.h>
+
+using namespace zipper;
+
+namespace
+{
+ time_t convertDosDateTime(uint16_t date, uint16_t time)
+ {
+ struct tm parts;
+ memset(&parts, 0, sizeof(parts));
+ parts.tm_sec = time & 0x1F;
+ parts.tm_min = (time & 0x7E0) >> 5;
+ parts.tm_hour = (time >> 11);
+ parts.tm_mday = date & 0x1F;
+ parts.tm_mon = ((date & 0x1E0) >> 5) - 1;
+ parts.tm_year = (date >> 9) + 80;
+ return mktime(&parts);
+ }
+
+ void convertDosDateTime(time_t in, uint16_t& date, uint16_t& time)
+ {
+ struct tm buf;
+ struct tm* parts(localtime_r(&in, &buf));
+
+ time =
+ parts->tm_sec +
+ (parts->tm_min << 5) +
+ (parts->tm_hour << 11);
+
+ date =
+ parts->tm_mday +
+ ((parts->tm_mon + 1) << 5) +
+ ((parts->tm_year - 80) << 9);
+ }
+
+ class FileEntry : public CompressedFile
+ {
+ public:
+ FileEntry(
+ const ReaderPtr& reader,
+ uint16_t versionNeeded,
+ uint16_t gpFlag,
+ uint16_t compressionMethod,
+ uint32_t crc,
+ zsize_t compressedSize,
+ zsize_t uncompressedSize,
+ time_t modTime,
+ zsize_t localHeaderOffset,
+ std::string fileName
+ ) :
+ m_reader(reader),
+ m_versionNeeded(versionNeeded),
+ m_gpFlag(gpFlag),
+ m_compressionMethod(compressionMethod),
+ m_crc(crc),
+ m_compressedSize(compressedSize),
+ m_uncompressedSize(uncompressedSize),
+ m_localHeaderOffset(localHeaderOffset),
+ m_fileName(fileName)
+ {
+ m_modTime.tv_sec = modTime;
+ m_modTime.tv_usec = 0;
+ }
+
+ virtual bool isDecompressSupported() const
+ {
+ return ((m_versionNeeded & 0xf) <= 20) &&
+ ((m_gpFlag & 0x1) == 0) && // Not encrypted
+ ((m_compressionMethod == 0) || (m_compressionMethod == 8));
+ }
+
+ virtual const std::string& getPath() const
+ {
+ return m_fileName;
+ }
+
+ virtual zsize_t getCompressedSize() const { return m_compressedSize; }
+ virtual zsize_t getUncompressedSize() const
+ {
+ return m_uncompressedSize;
+ }
+
+ virtual const timeval& getModificationTime() const { return m_modTime; }
+
+ virtual void decompress(Writer& writer)
+ {
+ enum
+ {
+ Signature = 0x04034b50,
+ MinRecordBytes = 30,
+ ChunkSize = 64*1024
+ };
+
+ std::vector<uint8_t> localRecord(MinRecordBytes);
+ m_reader->readData(
+ m_localHeaderOffset, MinRecordBytes, &localRecord[0]
+ );
+ if (read32_le(localRecord, 0) != Signature)
+ {
+ throw FormatException("Invalid local ZIP record");
+ }
+
+ // Don't trust the lengths for filename and extra content read from
+ // the central records. At least for extra, these DO differ for
+ // unknown reasons
+ zsize_t filenameLength(read16_le(localRecord, 26));
+ zsize_t extraLength(read16_le(localRecord, 28));
+
+ zsize_t startCompressedBytes(
+ m_localHeaderOffset +
+ MinRecordBytes +
+ filenameLength +
+ extraLength
+ );
+
+ zsize_t endCompressedBytes(
+ startCompressedBytes + m_compressedSize
+ );
+
+ if (endCompressedBytes > m_reader->getSize())
+ {
+ throw FormatException("Compressed file size is too long");
+ }
+
+ switch (m_compressionMethod)
+ {
+ case 0: // No compression
+ {
+ for (zsize_t pos(startCompressedBytes);
+ pos < endCompressedBytes;
+ pos += ChunkSize
+ )
+ {
+ uint8_t buf[ChunkSize];
+ zsize_t bytes(
+ std::min(zsize_t(ChunkSize), endCompressedBytes - pos)
+ );
+ m_reader->readData(pos, bytes, &buf[0]);
+ writer.writeData(pos, bytes, &buf[0]);
+ }
+ }; break;
+
+ case 8: // Deflate
+ {
+ uint32_t crc(0);
+ zsize_t inPos(startCompressedBytes);
+ zsize_t outPos(0);
+ inflate(
+ m_reader,
+ writer,
+ inPos,
+ endCompressedBytes,
+ outPos,
+ crc);
+
+ if (m_gpFlag & 0x4) // CRC is after compressed data
+ {
+ uint8_t dataDescriptor[12];
+ m_reader->readData(
+ inPos, sizeof(dataDescriptor), &dataDescriptor[0]);
+ m_crc = read32_le(dataDescriptor, 0);
+ m_compressedSize = read32_le(dataDescriptor, 4);
+ m_uncompressedSize = read32_le(dataDescriptor, 8);
+ }
+
+ if (crc != m_crc)
+ {
+ throw FormatException("Corrupt Data (CRC failure)");
+ }
+
+ }; break;
+ default:
+ throw UnsupportedException("Unsupported compression scheme");
+ };
+ }
+
+ private:
+ ReaderPtr m_reader;
+ uint16_t m_versionNeeded;
+ uint16_t m_gpFlag;
+ uint16_t m_compressionMethod;
+ uint32_t m_crc;
+ zsize_t m_compressedSize;
+ zsize_t m_uncompressedSize;
+ timeval m_modTime;
+ zsize_t m_localHeaderOffset;
+ std::string m_fileName;
+ };
+
+ bool readEndCentralDirectory(
+ const ReaderPtr& reader,
+ zsize_t& centralDirectoryBytes,
+ zsize_t& centralDirectoryOffset,
+ zsize_t& centralDirectoryEntries
+ )
+ {
+ // Read the end of central directory record. This
+ // record enables us to find the remainding
+ // records without searching for record signatures.
+
+ // TODO does not consider the Zip64 entries.
+
+ enum
+ {
+ MinRecordBytes = 22, // Minimum size with no comment
+ MaxCommentBytes = 65535, // 2 bytes to store comment length
+ Signature = 0x06054b50
+ };
+
+ zsize_t providerSize(reader->getSize());
+ if (providerSize < MinRecordBytes)
+ {
+ throw FormatException("Too small");
+ }
+
+ size_t bufSize(
+ std::min(zsize_t(MinRecordBytes + MaxCommentBytes), providerSize)
+ );
+ std::vector<uint8_t> buffer(bufSize);
+ reader->readData(providerSize - bufSize, bufSize, &buffer[0]);
+
+ // Need to search for this record, as it ends in a variable-length
+ // comment field. Search backwards, with the assumption that the
+ // comment doesn't exist, or is much smaller than the maximum
+ // length
+
+ bool recordFound(false);
+ ssize_t pos(bufSize - MinRecordBytes);
+ for (; pos >= 0; --pos)
+ {
+ recordFound = (read32_le(buffer, pos) == Signature);
+ break;
+ }
+
+ if (recordFound)
+ {
+ if (read16_le(buffer, pos + 4) != 0)
+ {
+ throw UnsupportedException("Spanned disks not supported");
+ }
+
+ centralDirectoryBytes = read32_le(buffer, pos + 12);
+ centralDirectoryOffset = read32_le(buffer, pos + 16);
+ centralDirectoryEntries = read16_le(buffer, pos + 10);
+ }
+ return recordFound;
+ }
+
+ std::vector<CompressedFilePtr>
+ readCentralDirectory(const ReaderPtr& reader)
+ {
+ enum Constants
+ {
+ MinRecordBytes = 46,
+ Signature = 0x02014b50
+ };
+
+ zsize_t centralDirectoryBytes(0);
+ zsize_t centralDirectoryOffset(0);
+ zsize_t centralDirectoryEntries(0);
+ bool isZip(
+ readEndCentralDirectory(
+ reader,
+ centralDirectoryBytes,
+ centralDirectoryOffset,
+ centralDirectoryEntries
+ )
+ );
+ (void) isZip; // Avoid unused warning.
+ assert(isZip);
+
+ std::vector<uint8_t> buffer(centralDirectoryBytes);
+ reader->readData(
+ centralDirectoryOffset,
+ centralDirectoryBytes,
+ &buffer[0]
+ );
+
+ zsize_t pos(0);
+ std::vector<CompressedFilePtr> entries;
+ while ((pos + MinRecordBytes) < buffer.size())
+ {
+ if (read32_le(buffer, pos) != Signature)
+ {
+ // Unknown record type.
+ pos += 1;
+ continue;
+ }
+
+ uint16_t versionNeeded(read16_le(buffer, pos + 6));
+ uint16_t gpFlag(read16_le(buffer, pos + 8));
+ uint16_t compressionMethod(read16_le(buffer, pos + 10));
+ uint16_t modTime(read16_le(buffer, pos + 12));
+ uint16_t modDate(read16_le(buffer, pos + 14));
+ uint32_t crc(read32_le(buffer, pos + 16));
+ uint32_t compressedSize(read32_le(buffer, pos + 20));
+ uint32_t uncompressedSize(read32_le(buffer, pos + 24));
+ size_t fileNameLen(read16_le(buffer, pos + 28));
+ size_t extraLen(read16_le(buffer, pos + 30));
+ size_t commentLen(read16_le(buffer, pos + 32));
+ uint32_t localHeaderOffset(read32_le(buffer, pos + 42));
+
+ if ((fileNameLen + extraLen + commentLen + MinRecordBytes + pos) >
+ buffer.size()
+ )
+ {
+ throw FormatException("File comments are too long");
+ }
+
+ std::string fileName(
+ &buffer[pos + MinRecordBytes],
+ &buffer[pos + MinRecordBytes + fileNameLen]
+ );
+
+ entries.push_back(
+ CompressedFilePtr(
+ new FileEntry(
+ reader,
+ versionNeeded,
+ gpFlag,
+ compressionMethod,
+ crc,
+ compressedSize,
+ uncompressedSize,
+ convertDosDateTime(modDate, modTime),
+ localHeaderOffset,
+ fileName
+ )
+ )
+ );
+
+ pos += MinRecordBytes + fileNameLen + extraLen + commentLen;
+ }
+ return entries;
+ }
+
+}
+
+
+void
+zipper::zip(
+ const std::string& filename,
+ const Reader& reader,
+ const WriterPtr& writer,
+ ZipFileRecord& outRecord)
+{
+ enum Constants
+ {
+ ChunkSize = 64*1024,
+ WindowBits = 15,
+ TimePos = 10
+ };
+
+ static uint8_t Header[] =
+ {
+ 0x50, 0x4b, 0x03, 0x04, // Header
+ 20, // Version (2.0)
+ 0, // File attributes
+ 0,0, // gp flag.
+ 8,0, // deflate method
+ 0,0, // file time
+ 0,0, // file date
+ 0,0,0,0, // CRC32
+ 0,0,0,0, // Compressed size
+ 0,0,0,0 // Uncompressed size
+ };
+
+ zsize_t outPos(writer->getSize());
+ outRecord.localHeaderOffset = outPos;
+ outRecord.filename = filename;
+
+ // Write header
+ {
+ uint8_t buffer[ChunkSize];
+ memcpy(buffer, Header, sizeof(Header));
+ zsize_t pos(sizeof(Header));
+
+ std::string::size_type filenameSize(filename.size());
+ if (filenameSize > (ChunkSize - pos))
+ {
+ filenameSize = ChunkSize - pos;
+ }
+ buffer[pos++] = filenameSize & 0xff;
+ buffer[pos++] = (filenameSize >> 8);
+ buffer[pos++] = 0; // extra field len
+ buffer[pos++] = 0; // extra field len
+ memcpy(buffer + pos, filename.data(), filenameSize);
+ pos += filenameSize;
+ writer->writeData(outPos, pos, &buffer[0]);
+ outPos += pos;
+ }
+
+ // Write compressed data
+ deflate(
+ reader,
+ writer,
+ outPos,
+ outRecord.uncompressedSize,
+ outRecord.compressedSize,
+ outRecord.crc32);
+
+ // Go back and complete the header.
+ convertDosDateTime(
+ reader.getModTime().tv_sec, outRecord.dosDate, outRecord.dosTime);
+ uint8_t trailer[16];
+ write16_le(outRecord.dosTime, &trailer[0]);
+ write16_le(outRecord.dosDate, &trailer[2]);
+ write32_le(outRecord.crc32, &trailer[4]);
+ write32_le(outRecord.compressedSize, &trailer[8]);
+ write32_le(outRecord.uncompressedSize, &trailer[12]);
+ writer->writeData(
+ outRecord.localHeaderOffset + TimePos, sizeof(trailer), &trailer[0]);
+}
+
+void
+zipper::zipFinalise(
+ const std::vector<ZipFileRecord>& records,
+ const WriterPtr& writer)
+{
+ enum Constants
+ {
+ ChunkSize = 64*1024
+ };
+
+ static uint8_t FileHeader[] =
+ {
+ 0x50, 0x4b, 0x01, 0x02, // Header
+ 20, 0x00, // Version (2.0)
+ 20, 0x00, // Version Needed to extract (2.0)
+ 0,0, // gp flag.
+ 8,0 // deflate method
+ };
+
+ zsize_t outPos(writer->getSize());
+ uint32_t centralDirOffset(outPos);
+
+ for (size_t i = 0; i < records.size(); ++i)
+ {
+ uint8_t buffer[ChunkSize];
+ memcpy(buffer, FileHeader, sizeof(FileHeader));
+ zsize_t pos(sizeof(FileHeader));
+
+ write16_le(records[i].dosTime, &buffer[pos]);
+ pos += 2;
+ write16_le(records[i].dosDate, &buffer[pos]);
+ pos += 2;
+
+ write32_le(records[i].crc32, &buffer[pos]);
+ pos += 4;
+
+ write32_le(records[i].compressedSize, &buffer[pos]);
+ pos += 4;
+
+ write32_le(records[i].uncompressedSize, &buffer[pos]);
+ pos += 4;
+
+ std::string::size_type filenameSize(records[i].filename.size());
+ if (filenameSize > (ChunkSize - pos))
+ {
+ filenameSize = ChunkSize - pos;
+ }
+ write16_le(filenameSize, &buffer[pos]);
+ pos += 2;
+
+ write16_le(0, &buffer[pos]); // extra field len
+ pos += 2;
+
+ write16_le(0, &buffer[pos]); // file comment len
+ pos += 2;
+
+ write16_le(0, &buffer[pos]); // disk number
+ pos += 2;
+
+ write16_le(0, &buffer[pos]); // internal file attributes
+ pos += 2;
+
+ write32_le(0, &buffer[pos]); // external file attributes
+ pos += 4;
+
+ write32_le(records[i].localHeaderOffset, &buffer[pos]);
+ pos += 4;
+
+ memcpy(buffer + pos, records[i].filename.data(), filenameSize);
+ pos += filenameSize;
+
+ writer->writeData(outPos, pos, &buffer[0]);
+ outPos += pos;
+ }
+
+ uint32_t centralDirSize(writer->getSize() - centralDirOffset);
+
+ {
+ // End-of-directory record.
+ static uint8_t EndDirectory[] =
+ {
+ 0x50, 0x4b, 0x05, 0x06, // Header
+ 0x00, 0x00, // Disk num
+ 0x00, 0x00 // Disk with central dir
+ };
+ uint8_t buffer[ChunkSize];
+ memcpy(buffer, EndDirectory, sizeof(EndDirectory));
+ zsize_t pos(sizeof(EndDirectory));
+
+ write16_le(records.size(), &buffer[pos]); // Entries on this disk
+ pos += 2;
+ write16_le(records.size(), &buffer[pos]); // Total entries
+ pos += 2;
+
+ write32_le(centralDirSize, &buffer[pos]);
+ pos += 4;
+ write32_le(centralDirOffset, &buffer[pos]);
+ pos += 4;
+
+ write16_le(0, &buffer[pos]); // Zip comment length
+ pos += 2;
+
+ writer->writeData(outPos, pos, &buffer[0]);
+ outPos += pos;
+ }
+}
+
+std::vector<CompressedFilePtr>
+zipper::unzip(const ReaderPtr& reader)
+{
+ return readCentralDirectory(reader);
+}
+
+bool
+zipper::isZip(const ReaderPtr& reader)
+{
+ zsize_t centralDirectoryBytes(0);
+ zsize_t centralDirectoryOffset(0);
+ zsize_t centralDirectoryEntries(0);
+ bool result(
+ readEndCentralDirectory(
+ reader,
+ centralDirectoryBytes,
+ centralDirectoryOffset,
+ centralDirectoryEntries
+ )
+ );
+ return result;
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+
+#include <string>
+#include <vector>
+
+namespace zipper
+{
+ struct ZipFileRecord
+ {
+ zsize_t localHeaderOffset;
+ uint32_t crc32;
+ zsize_t compressedSize;
+ zsize_t uncompressedSize;
+ uint16_t dosDate;
+ uint16_t dosTime;
+ std::string filename;
+ };
+
+ void zip(
+ const std::string& filename,
+ const Reader& reader,
+ const WriterPtr& writer,
+ ZipFileRecord& outRecord);
+
+ void zipFinalise(
+ const std::vector<ZipFileRecord>& records,
+ const WriterPtr& writer);
+
+ bool isZip(const ReaderPtr& reader);
+
+ std::vector<CompressedFilePtr> unzip(const ReaderPtr& reader);
+}
+
--- /dev/null
+.TH ZIPPER 1 "2011-05-26" "libzipper @libzipper_version@" "User Commands"
+.SH NAME
+zipper \- compress and extract files from archives
+.SH SYNOPSIS
+.B zipper
+{zip|gzip}
+.I archive file [files...]
+.PP
+.B zipper
+{unzip|gunzip}
+.I archive
+.SH DESCRIPTION
+.I zipper
+provides tools to manage compressed zip and gzip files.
+.PP
+.I zipper
+stores the full path of the specified files when creating an archive, but
+does not store any timestamp or permission information.
+.PP
+.I zipper
+extracts files to the full path specified within the archive; the original
+archive file is unchanged.
+.I zipper
+does not support restoring the original
+file timestamps or permissions, even if such information is recorded in the
+archive.
+.SH COMMANDS
+.TP
+.B zip
+Create a new zip archive
+.TP
+.B unzip
+Extract all files from a zip archive.
+.TP
+.B gzip
+Create a new gzip archive
+.TP
+.B gunzip
+Extract the first file from the gzip archive.
+.SH OPTIONS
+.TP
+.B archive
+Filename of the compressed zip/gzip file. The special '-' filename is treated
+as standard input/output. When creating a new archive, this file will
+be overwritten indiscriminately.
+.TP
+.B files
+A list of files to add into the archive. The special '-' filename is treated
+as standard input/output.
+.SH EXAMPLES
+.TP
+Create a zip file
+zipper zip /tmp/foo.zip bar.txt baz.txt
+.TP
+Extract a gzip file
+zipper gunzip /tmp/foo.gz
+.SH CONFORMING TO
+.I zipper
+supports the DEFLATE algorithm described by RFC1951, and the gzip file format
+described by RFC1952.
+.SH BUGS
+For gzip files,
+.I zipper
+is able to create an archive containing
+multiple files, but can only extract the first file.
+.SH SEE ALSO
+.BR gunzip (1),
+.BR gzip (1),
+.BR unzip (1),
+.BR zip (1)
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#include "zipper.hh"
+#include "split.hh"
+#include <errno.h>
+#include "strerror.hh"
+
+#include <cassert>
+#include <cstdlib>
+#include <deque>
+#include <iostream>
+#include <sstream>
+#include <string>
+
+using namespace zipper;
+
+static std::string argv0;
+
+static void usage()
+{
+ std::cerr <<
+ "libzipper Copyright (C) 2011 Michael McMaster <michael@codesrc.com>\n"
+ "This program comes with ABSOLUTELY NO WARRANTY.\n"
+ "This is free software, and you are welcome to redistribute it\n"
+ "under certain conditions.\n\n" <<
+
+ "Usage: \n" <<
+ argv0 << " {zip|gzip} archive file [files...]\n" <<
+ argv0 << " {unzip|gunzip} archive" << std::endl;
+}
+
+static WriterPtr
+getWriter(const std::string& optionName)
+{
+ std::shared_ptr<FileWriter> writer;
+ if (optionName == "-")
+ {
+ writer.reset(new FileWriter("stdout", 1, false));
+ }
+ else
+ {
+ writer.reset(new FileWriter(optionName, 0660));
+ }
+ return writer;
+}
+
+static ReaderPtr
+getReader(const std::string& optionName)
+{
+ std::shared_ptr<FileReader> reader;
+ if (optionName == "-")
+ {
+ reader.reset(new FileReader("stdin", 0, false));
+ }
+ else
+ {
+ reader.reset(new FileReader(optionName));
+ }
+ return reader;
+}
+
+static void
+command_zip(const std::deque<std::string>& options)
+{
+ if (options.size() < 2)
+ {
+ usage();
+ exit(EXIT_FAILURE);
+ }
+
+ WriterPtr writer(getWriter(options[0]));
+ Compressor comp(Container_zip, writer);
+ for (size_t i = 1; i < options.size(); ++i)
+ {
+ ReaderPtr reader(getReader(options[i]));
+ comp.addFile(*reader);
+ }
+}
+
+static void
+command_gzip(const std::deque<std::string>& options)
+{
+ if (options.size() != 2)
+ {
+ usage();
+ exit(EXIT_FAILURE);
+ }
+
+ WriterPtr writer(getWriter(options[0]));
+ Compressor comp(Container_gzip, writer);
+ for (size_t i = 1; i < options.size(); ++i)
+ {
+ ReaderPtr reader(getReader(options[i]));
+ comp.addFile(*reader);
+ }
+}
+
+static void
+command_extract(const std::deque<std::string>& options)
+{
+ if (options.size() != 1)
+ {
+ usage();
+ exit(EXIT_FAILURE);
+ }
+
+ ReaderPtr reader(getReader(options[0]));
+ Decompressor decomp(reader);
+ std::vector<CompressedFilePtr> entries(decomp.getEntries());
+ for (size_t f = 0; f < entries.size(); ++f)
+ {
+ std::deque<std::string> path;
+ split(
+ entries[f]->getPath(),
+ '/',
+ std::back_insert_iterator<std::deque<std::string> >(path));
+ path.pop_back(); // Remove extracted file.
+ std::stringstream builtPath;
+ for (std::deque<std::string>::iterator it(path.begin());
+ it != path.end();
+ ++it)
+ {
+ builtPath << *it;
+ int result(mkdir(builtPath.str().c_str(), 0775));
+ if (result != 0 && errno != EEXIST)
+ {
+ std::string errMsg(zipper::strerror(errno));
+
+ std::stringstream message;
+ message << "Could not create directory " <<
+ "\"" <<builtPath.str() << "\": " << errMsg;
+ throw IOException(message.str());
+ }
+
+ builtPath << '/';
+ }
+ FileWriter writer(
+ entries[f]->getPath(), 0660, entries[f]->getModificationTime());
+ entries[f]->decompress(writer);
+ }
+}
+
+int main(int argc, char** argv)
+{
+ argv0 = argv[0];
+ if (argc < 3)
+ {
+ usage();
+ exit(EXIT_FAILURE);
+ }
+
+ std::deque<std::string> options;
+ for (int i = 1; i < argc; ++i)
+ {
+ options.push_back(argv[i]);
+ }
+
+ std::string command(options[0]);
+ options.pop_front();
+ if (command == "zip")
+ {
+ command_zip(options);
+ }
+ else if (command == "gzip")
+ {
+ command_gzip(options);
+ }
+ else if (command == "gunzip" || command == "unzip")
+ {
+ command_extract(options);
+ }
+ else
+ {
+ usage();
+ exit(EXIT_FAILURE);
+ }
+
+ return EXIT_SUCCESS;
+}
+
--- /dev/null
+// Copyright (C) 2011 Michael McMaster <michael@codesrc.com>
+//
+// This file is part of libzipper.
+//
+// libzipper is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// libzipper is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with libzipper. If not, see <http://www.gnu.org/licenses/>.
+
+#ifndef zipper_hh
+#define zipper_hh
+
+#include <stdexcept>
+#include <memory>
+#include <string>
+#include <vector>
+
+#include <cstdint>
+
+#include <sys/stat.h> // For mode_t
+#include <sys/time.h> // For timeval
+
+/**
+\mainpage libzipper C++ (de)compression library
+
+\section intro Introduction
+libzipper offers a flexible C++ interface for reading compressed files
+in multiple formats.
+
+<a href="http://www.codesrc.com/src/libzipper">Homepage</a>
+
+libzipper aims to provide applications a transparent method of accessing
+compressed data. eg. libzipper is suited to reading XML config files that
+are compressed to save space.
+
+libzipper is not a general-purpose archive management library, as it
+does not provide access to the filesystem attributes of each file.
+(ie. libzipper does not support the concepts of file owner, group or
+permissions.
+
+\section formats Supported Formats
+<ul>
+ <li>gzip</li>
+ <li>zip</li>
+</ul>
+
+\section example_read Reading a compressed file into memory
+\code
+#include <zipper.hh>
+#include <algorithm>
+#include <vector>
+
+class MemWriter : public zipper::Writer
+{
+public:
+ std::vector<uint8_t> data;
+
+ virtual void writeData(
+ zsize_t offset, zsize_t bytes, const uint8_t* inData)
+ {
+ data.resize(std::max(offset + bytes, data.size()));
+ std::copy(inData, inData + bytes, &data[offset]);
+ }
+ virtual zsize_t getSize() const { return data.size(); }
+};
+
+std::vector<uint8_t> readSavedGame(const std::string& filename)
+{
+ // open the compressed input file. FileReader will throw an
+ // exception if an IO error occurs.
+ zipper::FileReader reader(filename);
+
+ MemWriter writer;
+
+ zipper::Decompressor decomp(reader);
+
+ std::vector<zipper::CompressedFilePtr> entries(decomp.getEntries());
+
+ if (!entries.empty())
+ {
+ // Uncompress the first file. Will pass-though data as-is if the
+ // file is not compressed.
+ entries.front()->decompress(writer);
+ }
+ return writer.data;
+}
+
+\endcode
+
+\section example_write Writing compressed files.
+\code
+#include <zipper.hh>
+#include <algorithm>
+#include <vector>
+
+class MemReader : public zipper::Reader
+{
+public:
+ MemReader(const vector<uint8_t>& data) : m_data(data) {}
+
+ virtual const std::string& getSourceName() const
+ {
+ static std::string Name("savedGame.dat");
+ return Name;
+ }
+
+ virtual const timeval& getModTime() const
+ {
+ return zipper::s_now;
+ }
+
+ virtual zsize_t getSize() const { return m_data.size(); }
+
+ virtual void readData(zsize_t offset, zsize_t bytes, uint8_t* dest) const
+ {
+ std::copy(&m_data[offset], &m_data[offset + bytes], dest);
+ }
+
+private:
+ std::vector<uint8_t> m_data;
+};
+
+void writeSavedGame(
+ const std::string& filename, const std::vector<uint8_t>& gameData)
+{
+ zipper::FileWriter writer(filename);
+ zipper::Compressor comp(zipper::Container_zip, writer);
+ comp.addFile(MemReader(gameData));
+}
+
+\endcode
+*/
+
+/// \namespace zipper
+/// \brief The zipper namespace contains the libzipper public API.
+namespace zipper
+{
+ /// \typedef zsize_t
+ /// zsize_t should be used exclusively when dealing with file offsets
+ /// and sizes to support large files (>4Gb).
+ ///
+ /// Unlike size_t on some systems, zsize_t will be 64bit when compiling for
+ /// a 32bit target.
+ typedef uint64_t zsize_t;
+
+ /// \enum ContainerFormat
+ /// ContainerFormat enumerates the compressed archive formats supported
+ /// by libzipper.
+ ///
+ /// An application can determine the supported formats by iterating
+ /// over the Container_begin to Container_end range. eg.
+ /// \code
+ /// for (int i = Container_begin; i < Container_end; ++i)
+ /// {
+ /// const Container& container(getContainer(ContainerFormat(i)));
+ /// }
+ /// \endcode
+ enum ContainerFormat
+ {
+ /// Iteration marker
+ Container_begin = 0,
+
+ /// No container (eg. plain text)
+ Container_none = 0,
+
+ /// ZIP
+ Container_zip,
+
+ /// gzip.
+ Container_gzip,
+
+ /// Iteration marker
+ Container_end
+ };
+
+ /// \struct Container
+ /// Provides libzipper capability details for a compressed archive
+ /// format.
+ /// \see getContainer
+ struct Container
+ {
+ /// \enum CapabilityBits allows a bitmask to be specified with a
+ /// combination of boolean flags.
+ enum CapabilityBits
+ {
+ /// Compression bit is set if the format is usable with Compressor
+ Compression = 1,
+
+ /// Decompression bit is set if the format is usable with
+ /// Decompressor
+ Decompression = 2,
+
+ /// EmbeddedFilenames bit is set if CompressedFile::getPath() is
+ /// supported
+ EmbeddedFilenames = 4,
+
+ /// Archive bit is set if multiple compressed files may exist in
+ /// a single container.
+ Archive = 8,
+
+ /// FileSize bit is set if the uncompressed size for each
+ /// compressed file is recorded in the container.
+ FileSize = 16
+ };
+
+ /// %Container Type
+ ContainerFormat format;
+
+ /// %Container Internet Media Type (aka MIME type).
+ /// eg. "application/zip"
+ std::string mediaType;
+
+ /// Bitmask comprised of CapabilityBits enum values.
+ uint32_t capabilities;
+ };
+
+ /// \brief When passed as a method parameter, it requests that the
+ /// current time be used instead.
+ extern const timeval s_now;
+
+ /// \brief Returns the capability details of the given format.
+ const Container& getContainer(ContainerFormat format);
+
+ /// \brief Base class for all exceptions thrown by libzipper
+ class Exception : public std::runtime_error
+ {
+ public:
+ /// Exception ctor
+ /// \param what A description of the error encountered.
+ Exception(const std::string& what);
+ };
+
+ /// \brief Exception thrown when the input data does not match
+ /// the expected Container format.
+ class FormatException : public Exception
+ {
+ public:
+ /// FormatException ctor
+ /// \param what A description of the error encountered.
+ FormatException(const std::string& what);
+ };
+
+ /// \brief Exception thrown when a Reader or Writer instance is unable
+ /// to satisfy an IO request due to an external error.
+ class IOException : public Exception
+ {
+ public:
+ /// IOException ctor
+ /// \param what A description of the error encountered.
+ IOException(const std::string& what);
+ };
+
+ /// \brief Exception thrown when an operation is requested on a compressed
+ /// archive that libzipper does not implement.
+ ///
+ /// This exception may be thrown even if libzipper advertises general
+ /// support for the Container format. eg. libzipper supports most
+ /// ZIP files, but an UnsupportedException will be thrown if given an
+ /// encrypted ZIP file.
+ class UnsupportedException : public Exception
+ {
+ public:
+ /// UnsupportedException ctor
+ /// \param what A description of the error encountered.
+ UnsupportedException(const std::string& what);
+ };
+
+ /// \brief Reader supplies input data to the compression/decompression
+ /// functions.
+ ///
+ /// Normally, an application using libzipper provides the Reader
+ /// implementation. The implementation could supply data from files,
+ /// in-memory buffers, or it could be generated on-the-fly.
+ ///
+ /// The Reader implementation must support random access, and must
+ /// determine at creation time the number of bytes available. The
+ /// Reader interface is not suitable for use with streaming data.
+ class Reader
+ {
+ public:
+ /// Reader dtor
+ virtual ~Reader();
+
+ /// Returns a name for this source of the data.
+ ///
+ /// For file-based Reader implementations, this would normally be
+ /// the input filename.
+ virtual const std::string& getSourceName() const = 0;
+
+ /// Return the last-modified timestamp of the data.
+ /// If the special s_now value is returned, the current time should be
+ /// used instead.
+ virtual const timeval& getModTime() const = 0;
+
+ /// Returns the number of bytes available via readData()
+ ///
+ /// \invariant getSize() is stable throughout the lifetime
+ /// of the Reader instance.
+ virtual zsize_t getSize() const = 0;
+
+ /// Copies data into the dest buffer
+ ///
+ /// An exception must be thrown if it is not possible to copy the
+ /// requested data into the supplied buffer (eg. file IO error).
+ ///
+ /// \pre offset + bytes <= getSize()
+ ///
+ /// \param offset Number of bytes to skip at the front of the data
+ /// source.
+ /// \param bytes Number of bytes to copy
+ /// \param dest Destination buffer.
+ ///
+ virtual void readData(
+ zsize_t offset, zsize_t bytes, uint8_t* dest
+ ) const = 0;
+
+ };
+
+ /// \brief FileReader is a file-based implementation of the Reader
+ /// interface.
+ class FileReader : public Reader
+ {
+ public:
+ /// Read data from the supplied file.
+ FileReader(const std::string& filename);
+
+ /// Read data from the supplied file.
+ ///
+ /// \param filename The value used by getSourceName(). This name
+ /// is arbitary, and does not need to be related to fd.
+ ///
+ /// \param fd The descriptor to source data from. The descriptor
+ /// must be open for reading, blocking, and seekable (ie. lseek(2)).
+ ///
+ /// \param closeFd If true, fd will be closed by this object
+ /// when it is no longer needed.
+ FileReader(const std::string& filename, int fd, bool closeFd);
+
+ /// FileReader dtor
+ virtual ~FileReader();
+
+ /// Inherited from Reader
+ virtual const std::string& getSourceName() const;
+
+ /// Inherited from Reader
+ virtual const timeval& getModTime() const;
+
+ /// Inherited from Reader
+ virtual zsize_t getSize() const;
+
+ /// Inherited from Reader
+ virtual void readData(
+ zsize_t offset, zsize_t bytes, uint8_t* dest
+ ) const;
+ private:
+ FileReader(const FileReader&);
+ FileReader& operator=(const FileReader&);
+
+ class FileReaderImpl;
+ FileReaderImpl* m_impl;
+ };
+
+ /// \typedef ReaderPtr
+ /// A shared pointer to a Reader
+ typedef std::shared_ptr<Reader> ReaderPtr;
+
+ /// \brief Writer accepts output data from the compression/decompression
+ /// functions.
+ ///
+ /// Normally, an application using libzipper provides the Writer
+ /// implementation. The implementation could write data to files,
+ /// in-memory buffers, or it could be simply discarded.
+ ///
+ /// The Writer implementation needs only to support sequential access.
+ class Writer
+ {
+ public:
+ /// Writer dtor
+ virtual ~Writer();
+
+ /// Returns the size of the written data.
+ virtual zsize_t getSize() const = 0;
+
+ /// Accepts output from libzipper
+ ///
+ /// An exception must be thrown if it is not possible to accept
+ /// given data. (eg. file IO error).
+ ///
+ /// \param offset Number of bytes to skip at the front of the data
+ /// source. Skipped bytes will contain null characters if not already
+ /// assigned a value.
+ /// \param bytes Number of bytes in data
+ /// \param data Output from libzipper.
+ ///
+ virtual void writeData(
+ zsize_t offset, zsize_t bytes, const uint8_t* data
+ ) = 0;
+ };
+
+ /// \typedef WriterPtr
+ /// A shared pointer to a Writer
+ typedef std::shared_ptr<Writer> WriterPtr;
+
+ /// \brief FileWrter is a file-based implementation of the Writer
+ /// interface.
+ class FileWriter : public Writer
+ {
+ public:
+ /// Write data to the supplied file.
+ /// If the file already exists, it will be truncated.
+ /// If the file does not exist, it will be created with the
+ /// given permissions.
+ ///
+ /// \param filename The file to open for writing.
+ ///
+ /// \param createPermissions The permissions set on the file if it is to
+ /// be created.
+ ///
+ /// \param modTime Set a specific modification time on the created file.
+ /// If the special s_now value is provided, the current time will be
+ /// used.
+ ///
+ FileWriter(
+ const std::string& filename,
+ mode_t createPermissions = 0664,
+ const timeval& modTime = s_now);
+
+ /// Write data to the supplied file.
+ ///
+ /// \param filename The filename reported in any exception error
+ /// messages. This name is arbitary, and does not need to be
+ /// related to fd.
+ ///
+ /// \param fd The descriptor to write data to. The descriptor
+ /// must be open for writing in blocking mode.
+ ///
+ /// \param closeFd If true, fd will be closed by this object
+ /// when it is no longer needed.
+ FileWriter(const std::string& filename, int fd, bool closeFd);
+
+ /// FileWriter dtor
+ virtual ~FileWriter();
+
+ /// Inherited from Writer
+ virtual zsize_t getSize() const;
+
+ /// Inherited from Writer
+ virtual void writeData(
+ zsize_t offset, zsize_t bytes, const uint8_t* data
+ );
+ private:
+ FileWriter(const FileWriter&);
+ FileWriter& operator=(const FileWriter&);
+
+ class FileWriterImpl;
+ FileWriterImpl* m_impl;
+ };
+
+ /// \brief CompressedFile represents an entry within a compressed archive.
+ ///
+ /// CompressedFile instances are created by Decompressor, and allow
+ /// selectively extracting the contents of an archive.
+ class CompressedFile
+ {
+ public:
+ /// CompressedFile dtor
+ virtual ~CompressedFile();
+
+ /// Return true if decompress is likely to succeed.
+ ///
+ /// isDecompressSupported may return false if libzipper doesn't know
+ /// how to deal with the compressed data. eg. encrypted files,
+ /// or ZIP files compressed with non-standard schemes.
+ virtual bool isDecompressSupported() const = 0;
+
+ /// Decompress the file, and store the results via the given
+ /// writer object.
+ virtual void decompress(Writer& writer) = 0;
+
+ /// Return the file path of the compressed file.
+ ///
+ /// Unix-style path separaters ('/') are returned, even if the
+ /// archive was created under an alternative OS.
+ virtual const std::string& getPath() const = 0;
+
+ /// Return the compressed size of the file
+ ///
+ /// getCompressedSize() will return -1 of the FileSize capability
+ /// bit of the container is false.
+ virtual zsize_t getCompressedSize() const = 0;
+
+ /// Return the uncompressed size of the file
+ ///
+ /// The decompress method will pass exactly this number of bytes
+ /// to the Writer.
+ ///
+ /// getUncompressedSize() will return -1 of the FileSize capability
+ /// bit of the container is false.
+ virtual zsize_t getUncompressedSize() const = 0;
+
+ /// Return the modification time of the original file
+ virtual const timeval& getModificationTime() const = 0;
+ };
+ /// \typedef CompressedFilePtr
+ /// A shared pointer to a CompressedFile
+ typedef std::shared_ptr<CompressedFile> CompressedFilePtr;
+
+ /// \brief Decompressor detects the compressed archive type of the data,
+ /// and creates suitable CompressedFile instances to access the compressed
+ /// data.
+ class Decompressor
+ {
+ public:
+ /// Create a decompressor from the data made available by reader.
+ Decompressor(const ReaderPtr& reader);
+
+ /// Create a decompressor from the data made available by reader.
+ ///
+ /// \param reader must remain in scope for the lifetime of the
+ /// Decompressor, and lifetime of any CompressedFile objects returned
+ /// from getEntries()
+ Decompressor(Reader& reader);
+
+ /// Decompressor dtor
+ ~Decompressor();
+
+ /// Return the detected Container type of the compressed archive.
+ ContainerFormat getContainerFormat() const;
+
+ /// Return CompressedFile entries to represent the file entries within
+ /// a compressed archive.
+ std::vector<CompressedFilePtr> getEntries() const;
+ private:
+ Decompressor(const Decompressor&);
+ Decompressor& operator=(const Decompressor&);
+
+ class DecompressorImpl;
+ DecompressorImpl* m_decompressor;
+ };
+
+ /// \brief Compressor creates a compressed archive from the supplied
+ /// Reader objects.
+ /// data.
+ class Compressor
+ {
+ public:
+ /// Create a Compressor to output the given compressed archived format
+ /// to writer.
+ /// \param writer destination of the compressed data
+ /// \param format determines the output archive file type to
+ /// create.
+ Compressor(ContainerFormat format, const WriterPtr& writer);
+
+ /// Create a Compressor to output the given compressed archived format
+ /// to writer.
+ ///
+ /// \param writer is the destination of the compressed data. writer
+ /// must remain in scope for the lifetime of the Compressor.
+ /// \param format determines the output archive file type to
+ /// create.
+ Compressor(ContainerFormat format, Writer& writer);
+
+ /// \brief Compressor dtor
+ ///
+ /// Additional data may be passed to writer (given in ctor) to close
+ /// the compressed archive.
+ ~Compressor();
+
+ /// Compress the data given by reader, and add it to the compressed
+ /// archive.
+ void addFile(const Reader& reader);
+
+ class CompressorImpl;
+ private:
+ Compressor(const Compressor&);
+ Compressor& operator=(const Compressor&);
+
+ CompressorImpl* m_compressor;
+ };
+}
+
+#endif
+
#include <wx/windowptr.h>
#include <wx/thread.h>
+#include <zipper.hh>
+
#include "ConfigUtil.hh"
#include "TargetPanel.hh"
#include "SCSI2SD_Bootloader.hh"
--- /dev/null
+cmake_minimum_required(VERSION 2.4.4)
+set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
+
+project(zlib C)
+
+set(VERSION "1.2.8")
+
+option(ASM686 "Enable building i686 assembly implementation")
+option(AMD64 "Enable building amd64 assembly implementation")
+
+set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
+set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
+set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")
+set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages")
+set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files")
+
+include(CheckTypeSize)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCSourceCompiles)
+enable_testing()
+
+check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+check_include_file(stdint.h HAVE_STDINT_H)
+check_include_file(stddef.h HAVE_STDDEF_H)
+
+#
+# Check to see if we have large file support
+#
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
+# We add these other definitions here because CheckTypeSize.cmake
+# in CMake 2.4.x does not automatically do so and we want
+# compatibility with CMake 2.4.x.
+if(HAVE_SYS_TYPES_H)
+ list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H)
+endif()
+if(HAVE_STDINT_H)
+ list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H)
+endif()
+if(HAVE_STDDEF_H)
+ list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H)
+endif()
+check_type_size(off64_t OFF64_T)
+if(HAVE_OFF64_T)
+ add_definitions(-D_LARGEFILE64_SOURCE=1)
+endif()
+set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
+
+#
+# Check for fseeko
+#
+check_function_exists(fseeko HAVE_FSEEKO)
+if(NOT HAVE_FSEEKO)
+ add_definitions(-DNO_FSEEKO)
+endif()
+
+#
+# Check for unistd.h
+#
+check_include_file(unistd.h Z_HAVE_UNISTD_H)
+
+if(MSVC)
+ set(CMAKE_DEBUG_POSTFIX "d")
+ add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
+ add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+ include_directories(${CMAKE_CURRENT_SOURCE_DIR})
+endif()
+
+if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+ # If we're doing an out of source build and the user has a zconf.h
+ # in their source tree...
+ if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
+ message(STATUS "Renaming")
+ message(STATUS " ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h")
+ message(STATUS "to 'zconf.h.included' because this file is included with zlib")
+ message(STATUS "but CMake generates it automatically in the build directory.")
+ file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included)
+ endif()
+endif()
+
+set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc)
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein
+ ${ZLIB_PC} @ONLY)
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+ ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR})
+
+
+#============================================================================
+# zlib
+#============================================================================
+
+set(ZLIB_PUBLIC_HDRS
+ ${CMAKE_CURRENT_BINARY_DIR}/zconf.h
+ zlib.h
+)
+set(ZLIB_PRIVATE_HDRS
+ crc32.h
+ deflate.h
+ gzguts.h
+ inffast.h
+ inffixed.h
+ inflate.h
+ inftrees.h
+ trees.h
+ zutil.h
+)
+set(ZLIB_SRCS
+ adler32.c
+ compress.c
+ crc32.c
+ deflate.c
+ gzclose.c
+ gzlib.c
+ gzread.c
+ gzwrite.c
+ inflate.c
+ infback.c
+ inftrees.c
+ inffast.c
+ trees.c
+ uncompr.c
+ zutil.c
+)
+
+if(NOT MINGW)
+ set(ZLIB_DLL_SRCS
+ win32/zlib1.rc # If present will override custom build rule below.
+ )
+endif()
+
+if(CMAKE_COMPILER_IS_GNUCC)
+ if(ASM686)
+ set(ZLIB_ASMS contrib/asm686/match.S)
+ elseif (AMD64)
+ set(ZLIB_ASMS contrib/amd64/amd64-match.S)
+ endif ()
+
+ if(ZLIB_ASMS)
+ add_definitions(-DASMV)
+ set_source_files_properties(${ZLIB_ASMS} PROPERTIES LANGUAGE C COMPILE_FLAGS -DNO_UNDERLINE)
+ endif()
+endif()
+
+if(MSVC)
+ if(ASM686)
+ ENABLE_LANGUAGE(ASM_MASM)
+ set(ZLIB_ASMS
+ contrib/masmx86/inffas32.asm
+ contrib/masmx86/match686.asm
+ )
+ elseif (AMD64)
+ ENABLE_LANGUAGE(ASM_MASM)
+ set(ZLIB_ASMS
+ contrib/masmx64/gvmat64.asm
+ contrib/masmx64/inffasx64.asm
+ )
+ endif()
+
+ if(ZLIB_ASMS)
+ add_definitions(-DASMV -DASMINF)
+ endif()
+endif()
+
+# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
+file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*"
+ "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
+
+if(MINGW)
+ # This gets us DLL resource information when compiling on MinGW.
+ if(NOT CMAKE_RC_COMPILER)
+ set(CMAKE_RC_COMPILER windres.exe)
+ endif()
+
+ add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+ COMMAND ${CMAKE_RC_COMPILER}
+ -D GCC_WINDRES
+ -I ${CMAKE_CURRENT_SOURCE_DIR}
+ -I ${CMAKE_CURRENT_BINARY_DIR}
+ -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+ -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc)
+ set(ZLIB_DLL_SRCS ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
+endif(MINGW)
+
+add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
+set_target_properties(zlib PROPERTIES SOVERSION 1)
+
+if(NOT CYGWIN)
+ # This property causes shared libraries on Linux to have the full version
+ # encoded into their final filename. We disable this on Cygwin because
+ # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll
+ # seems to be the default.
+ #
+ # This has no effect with MSVC, on that platform the version info for
+ # the DLL comes from the resource file win32/zlib1.rc
+ set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION})
+endif()
+
+if(UNIX)
+ # On unix-like platforms the library is almost always called libz
+ set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z)
+ if(NOT APPLE)
+ set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,\"${CMAKE_CURRENT_SOURCE_DIR}/zlib.map\"")
+ endif()
+elseif(BUILD_SHARED_LIBS AND WIN32)
+ # Creates zlib1.dll when building shared library version
+ set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
+endif()
+
+if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
+ install(TARGETS zlib zlibstatic
+ RUNTIME DESTINATION "${INSTALL_BIN_DIR}"
+ ARCHIVE DESTINATION "${INSTALL_LIB_DIR}"
+ LIBRARY DESTINATION "${INSTALL_LIB_DIR}" )
+endif()
+if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
+ install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+ install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+ install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}")
+endif()
+
+#============================================================================
+# Example binaries
+#============================================================================
+
+add_executable(example test/example.c)
+target_link_libraries(example zlib)
+add_test(example example)
+
+add_executable(minigzip test/minigzip.c)
+target_link_libraries(minigzip zlib)
+
+if(HAVE_OFF64_T)
+ add_executable(example64 test/example.c)
+ target_link_libraries(example64 zlib)
+ set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+ add_test(example64 example64)
+
+ add_executable(minigzip64 test/minigzip.c)
+ target_link_libraries(minigzip64 zlib)
+ set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+endif()
--- /dev/null
+
+ ChangeLog file for zlib
+
+Changes in 1.2.8 (28 Apr 2013)
+- Update contrib/minizip/iowin32.c for Windows RT [Vollant]
+- Do not force Z_CONST for C++
+- Clean up contrib/vstudio [Ro§]
+- Correct spelling error in zlib.h
+- Fix mixed line endings in contrib/vstudio
+
+Changes in 1.2.7.3 (13 Apr 2013)
+- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc
+
+Changes in 1.2.7.2 (13 Apr 2013)
+- Change check for a four-byte type back to hexadecimal
+- Fix typo in win32/Makefile.msc
+- Add casts in gzwrite.c for pointer differences
+
+Changes in 1.2.7.1 (24 Mar 2013)
+- Replace use of unsafe string functions with snprintf if available
+- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink]
+- Fix gzgetc undefine when Z_PREFIX set [Turk]
+- Eliminate use of mktemp in Makefile (not always available)
+- Fix bug in 'F' mode for gzopen()
+- Add inflateGetDictionary() function
+- Correct comment in deflate.h
+- Use _snprintf for snprintf in Microsoft C
+- On Darwin, only use /usr/bin/libtool if libtool is not Apple
+- Delete "--version" file if created by "ar --version" [Richard G.]
+- Fix configure check for veracity of compiler error return codes
+- Fix CMake compilation of static lib for MSVC2010 x64
+- Remove unused variable in infback9.c
+- Fix argument checks in gzlog_compress() and gzlog_write()
+- Clean up the usage of z_const and respect const usage within zlib
+- Clean up examples/gzlog.[ch] comparisons of different types
+- Avoid shift equal to bits in type (caused endless loop)
+- Fix unintialized value bug in gzputc() introduced by const patches
+- Fix memory allocation error in examples/zran.c [Nor]
+- Fix bug where gzopen(), gzclose() would write an empty file
+- Fix bug in gzclose() when gzwrite() runs out of memory
+- Check for input buffer malloc failure in examples/gzappend.c
+- Add note to contrib/blast to use binary mode in stdio
+- Fix comparisons of differently signed integers in contrib/blast
+- Check for invalid code length codes in contrib/puff
+- Fix serious but very rare decompression bug in inftrees.c
+- Update inflateBack() comments, since inflate() can be faster
+- Use underscored I/O function names for WINAPI_FAMILY
+- Add _tr_flush_bits to the external symbols prefixed by --zprefix
+- Add contrib/vstudio/vc10 pre-build step for static only
+- Quote --version-script argument in CMakeLists.txt
+- Don't specify --version-script on Apple platforms in CMakeLists.txt
+- Fix casting error in contrib/testzlib/testzlib.c
+- Fix types in contrib/minizip to match result of get_crc_table()
+- Simplify contrib/vstudio/vc10 with 'd' suffix
+- Add TOP support to win32/Makefile.msc
+- Suport i686 and amd64 assembler builds in CMakeLists.txt
+- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h
+- Add vc11 and vc12 build files to contrib/vstudio
+- Add gzvprintf() as an undocumented function in zlib
+- Fix configure for Sun shell
+- Remove runtime check in configure for four-byte integer type
+- Add casts and consts to ease user conversion to C++
+- Add man pages for minizip and miniunzip
+- In Makefile uninstall, don't rm if preceding cd fails
+- Do not return Z_BUF_ERROR if deflateParam() has nothing to write
+
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
+Changes in 1.2.6.1 (12 Feb 2012)
+- Avoid the use of the Objective-C reserved name "id"
+- Include io.h in gzguts.h for Microsoft compilers
+- Fix problem with ./configure --prefix and gzgetc macro
+- Include gz_header definition when compiling zlib solo
+- Put gzflags() functionality back in zutil.c
+- Avoid library header include in crc32.c for Z_SOLO
+- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
+- Minor cleanup in contrib/minizip/zip.c [Vollant]
+- Update make_vms.com [Zinser]
+- Remove unnecessary gzgetc_ function
+- Use optimized byte swap operations for Microsoft and GNU [Snyder]
+- Fix minor typo in zlib.h comments [Rzesniowiecki]
+
+Changes in 1.2.6 (29 Jan 2012)
+- Update the Pascal interface in contrib/pascal
+- Fix function numbers for gzgetc_ in zlibvc.def files
+- Fix configure.ac for contrib/minizip [Schiffer]
+- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
+- Have ./configure use the compiler return code for error indication
+- Fix CMakeLists.txt for cross compilation [McClure]
+- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
+- Fix compilation of contrib/minizip on FreeBSD [Marquez]
+- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
+- Include io.h for Turbo C / Borland C on all platforms [Truta]
+- Make version explicit in contrib/minizip/configure.ac [Bosmans]
+- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
+- Minor cleanup up contrib/minizip/unzip.c [Vollant]
+- Fix bug when compiling minizip with C++ [Vollant]
+- Protect for long name and extra fields in contrib/minizip [Vollant]
+- Avoid some warnings in contrib/minizip [Vollant]
+- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
+- Add missing libs to minizip linker command
+- Add support for VPATH builds in contrib/minizip
+- Add an --enable-demos option to contrib/minizip/configure
+- Add the generation of configure.log by ./configure
+- Exit when required parameters not provided to win32/Makefile.gcc
+- Have gzputc return the character written instead of the argument
+- Use the -m option on ldconfig for BSD systems [Tobias]
+- Correct in zlib.map when deflateResetKeep was added
+
+Changes in 1.2.5.3 (15 Jan 2012)
+- Restore gzgetc function for binary compatibility
+- Do not use _lseeki64 under Borland C++ [Truta]
+- Update win32/Makefile.msc to build test/*.c [Truta]
+- Remove old/visualc6 given CMakefile and other alternatives
+- Update AS400 build files and documentation [Monnerat]
+- Update win32/Makefile.gcc to build test/*.c [Truta]
+- Permit stronger flushes after Z_BLOCK flushes
+- Avoid extraneous empty blocks when doing empty flushes
+- Permit Z_NULL arguments to deflatePending
+- Allow deflatePrime() to insert bits in the middle of a stream
+- Remove second empty static block for Z_PARTIAL_FLUSH
+- Write out all of the available bits when using Z_BLOCK
+- Insert the first two strings in the hash table after a flush
+
+Changes in 1.2.5.2 (17 Dec 2011)
+- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
+- use relative symlinks for shared libs
+- Avoid searching past window for Z_RLE strategy
+- Assure that high-water mark initialization is always applied in deflate
+- Add assertions to fill_window() in deflate.c to match comments
+- Update python link in README
+- Correct spelling error in gzread.c
+- Fix bug in gzgets() for a concatenated empty gzip stream
+- Correct error in comment for gz_make()
+- Change gzread() and related to ignore junk after gzip streams
+- Allow gzread() and related to continue after gzclearerr()
+- Allow gzrewind() and gzseek() after a premature end-of-file
+- Simplify gzseek() now that raw after gzip is ignored
+- Change gzgetc() to a macro for speed (~40% speedup in testing)
+- Fix gzclose() to return the actual error last encountered
+- Always add large file support for windows
+- Include zconf.h for windows large file support
+- Include zconf.h.cmakein for windows large file support
+- Update zconf.h.cmakein on make distclean
+- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
+- Clarify how gzopen() appends in zlib.h comments
+- Correct documentation of gzdirect() since junk at end now ignored
+- Add a transparent write mode to gzopen() when 'T' is in the mode
+- Update python link in zlib man page
+- Get inffixed.h and MAKEFIXED result to match
+- Add a ./config --solo option to make zlib subset with no libary use
+- Add undocumented inflateResetKeep() function for CAB file decoding
+- Add --cover option to ./configure for gcc coverage testing
+- Add #define ZLIB_CONST option to use const in the z_stream interface
+- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
+- Note behavior of uncompress() to provide as much data as it can
+- Add files in contrib/minizip to aid in building libminizip
+- Split off AR options in Makefile.in and configure
+- Change ON macro to Z_ARG to avoid application conflicts
+- Facilitate compilation with Borland C++ for pragmas and vsnprintf
+- Include io.h for Turbo C / Borland C++
+- Move example.c and minigzip.c to test/
+- Simplify incomplete code table filling in inflate_table()
+- Remove code from inflate.c and infback.c that is impossible to execute
+- Test the inflate code with full coverage
+- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
+- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
+- Fix gzwrite.c to accommodate reduced memory zlib compilation
+- Have inflate() with Z_FINISH avoid the allocation of a window
+- Do not set strm->adler when doing raw inflate
+- Fix gzeof() to behave just like feof() when read is not past end of file
+- Fix bug in gzread.c when end-of-file is reached
+- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
+- Document gzread() capability to read concurrently written files
+- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
+
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+ Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+ _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling errors in zlib.h [Willem, Sobrado]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+ binary compatibility -- a normal version and a 64-bit offset version,
+ per the Large File Support Extension when _LARGEFILE64_SOURCE is
+ defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+ is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B\8ack]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+ [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+ trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+ gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+ Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+ the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+ for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+ doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+ that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+ un-versioned, the patch adds versioning only for symbols introduced in
+ zlib-1.2.0 or later. It also declares as local those symbols which are
+ not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+ NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+ compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+ directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+ ENOUGH and MAXD -- this repairs a possible security vulnerability for
+ invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
+ discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+ avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+ fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+ and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+ contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+ dynamic blocks with only literals and no distance codes --
+ Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+ - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+ - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+ the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+ [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+ and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+ [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+ [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+ INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+ [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+ of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+ parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+ to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+ 16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+ Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+ zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+ library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+ special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+ - Report 0 for huffman and rle strategies and for level == 0 or 1
+ - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+ - When Z_RLE requested, restrict matches to distance one
+ - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+ - Refine detection of Turbo C need for dummy returns
+ - Refine ZLIB_DLL compilation
+ - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+ write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+ - About 20% faster
+ - Does not allocate 32K window unless and until needed
+ - Automatically detects and decompresses gzip streams
+ - Raw inflate no longer needs an extra dummy byte at end
+ - Added inflateBack functions using a callback interface--even faster
+ than inflate, useful for file utilities (gzip, zip)
+ - Added inflateCopy() function to record state for random access on
+ externally generated deflate streams (e.g. in gzip files)
+ - More readable code (I hope)
+- New and improved crc32()
+ - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+ and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+ return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+ is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+ - Document raw deflate and inflate
+ - Update RFCs URL
+ - Point out that zlib and gzip formats are different
+ - Note that Z_BUF_ERROR is not fatal
+ - Document string limit for gzprintf() and possible buffer overflow
+ - Note requirement on avail_out when flushing
+ - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+ This creates a security problem described in
+ http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+ less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+ of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+ occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+ (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean" (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+ . zutil.c, zutil.h: added "const" for zmem*
+ . Make_vms.com: fixed some typos
+ . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+ . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+ . msdos/Makefile.*: use model-dependent name for the built zlib library
+ . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+ new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+ See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+ completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+ (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+ compression ratio on some files. This also allows inlining _tr_tally for
+ matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+ on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+ the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+ them at run time (thanks to Ken Raeburn for this suggestion). To create
+ trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+ gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occurring only with compression level 0 (thanks to
+ Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+ (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+ (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+ inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+ contrib/asm386/ by Gilles Vollant <info@winimage.com>
+ 386 asm code replacing longest_match().
+ contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+ contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
+ Another C++ I/O streams interface
+ contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ A very simple tar.gz file extractor using zlib
+ contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+ How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+ level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+ (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+ bit, so the decompressor could decompress all the correct data but went
+ on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+ small and medium models; this makes the library incompatible with previous
+ versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+ avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+ Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+ and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+ -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+ warning C4746: 'inflate_mask' : unsized array treated as '__far'
+ (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+ not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+ (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+ typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+ was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+ pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+ is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+ (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+ TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+ (one's complement) is now done inside crc32(). WARNING: this is
+ incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+ not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+ Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+ if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+ user-provided history buffer. This is supported only in deflateInit2
+ and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
--- /dev/null
+
+ Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+ Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+ The zlib sources can be compiled without change to produce a DLL. See the
+ file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the
+ precompiled DLL are found in the zlib web site at http://zlib.net/ .
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+ See
+ * http://marknelson.us/1997/01/01/zlib-engine/
+ * win32/DLL_FAQ.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR.
+
+ Make sure that before the call of compress(), the length of the compressed
+ buffer is equal to the available size of the compressed buffer and not
+ zero. For Visual Basic, check that this parameter is passed by reference
+ ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
+
+ Before making the call, make sure that avail_in and avail_out are not zero.
+ When setting the parameter flush equal to Z_FINISH, also make sure that
+ avail_out is big enough to allow processing all pending input. Note that a
+ Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+ made with more input or output space. A Z_BUF_ERROR may in fact be
+ unavoidable depending on how the functions are used, since it is not
+ possible to tell whether or not there is more output pending when
+ strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a
+ heavily annotated example.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+ It's in zlib.h . Examples of zlib usage are in the files test/example.c
+ and test/minigzip.c, with more in examples/ .
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+ Because we would like to keep zlib as a very small and simple package.
+ zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+ Most of the time, such problems are due to an incorrect usage of zlib.
+ Please try to reproduce the problem with a small program and send the
+ corresponding source to us at zlib@gzip.org . Do not send multi-megabyte
+ data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+ If "make test" produces something like
+
+ example.o(.text+0x154): undefined reference to `gzputc'
+
+ check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+ /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+ See the contrib/delphi directory in the zlib distribution.
+
+11. Can zlib handle .zip archives?
+
+ Not by itself, no. See the directory contrib/minizip in the zlib
+ distribution.
+
+12. Can zlib handle .Z files?
+
+ No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+ the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+ By default a shared (and a static) library is built for Unix. So:
+
+ make distclean
+ ./configure
+ make
+
+14. How do I install a shared zlib library on Unix?
+
+ After the above, then:
+
+ make install
+
+ However, many flavors of Unix come with a shared zlib already installed.
+ Before going to the trouble of compiling a shared version of zlib and
+ trying to install it, you may want to check if it's already there! If you
+ can #include <zlib.h>, it's there. The -lz option will probably link to
+ it. You can check the version at the top of zlib.h or with the
+ ZLIB_VERSION symbol defined in zlib.h .
+
+15. I have a question about OttoPDF.
+
+ We are not the authors of OttoPDF. The real author is on the OttoPDF web
+ site: Joel Hainley, jhainley@myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+ Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+ http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+ After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+ generates an error such as:
+
+ ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+ symbol __register_frame_info: referenced symbol not found
+
+ The symbol __register_frame_info is not part of zlib, it is generated by
+ the C compiler (cc or gcc). You must recompile applications using zlib
+ which have this problem. This problem is specific to Solaris. See
+ http://www.sunfreeware.com for Solaris versions of zlib and applications
+ using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
+
+ The compress and deflate functions produce data in the zlib format, which
+ is different and incompatible with the gzip format. The gz* functions in
+ zlib on the other hand use the gzip format. Both the zlib and gzip formats
+ use the same compressed data format internally, but have different headers
+ and trailers around the compressed data.
+
+19. Ok, so why are there two different formats?
+
+ The gzip format was designed to retain the directory information about a
+ single file, such as the name and last modification date. The zlib format
+ on the other hand was designed for in-memory and communication channel
+ applications, and has a much more compact header and trailer and uses a
+ faster integrity check than gzip.
+
+20. Well that's nice, but how do I make a gzip file in memory?
+
+ You can request that deflate write the gzip format instead of the zlib
+ format using deflateInit2(). You can also request that inflate decode the
+ gzip format using inflateInit2(). Read zlib.h for more details.
+
+21. Is zlib thread-safe?
+
+ Yes. However any library routines that zlib uses and any application-
+ provided memory allocation routines must also be thread-safe. zlib's gz*
+ functions use stdio library routines, and most of zlib's functions use the
+ library memory allocation routines by default. zlib's *Init* functions
+ allow for the application to provide custom memory allocation routines.
+
+ Of course, you should only operate on any given zlib or gzip stream from a
+ single thread at a time.
+
+22. Can I use zlib in my commercial application?
+
+ Yes. Please read the license in zlib.h.
+
+23. Is zlib under the GNU license?
+
+ No. Please read the license in zlib.h.
+
+24. The license says that altered source versions must be "plainly marked". So
+ what exactly do I need to do to meet that requirement?
+
+ You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+ particular, the final version number needs to be changed to "f", and an
+ identification string should be appended to ZLIB_VERSION. Version numbers
+ x.x.x.f are reserved for modifications to zlib by others than the zlib
+ maintainers. For example, if the version of the base zlib you are altering
+ is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
+ ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+ update the version strings in deflate.c and inftrees.c.
+
+ For altered source distributions, you should also note the origin and
+ nature of the changes in zlib.h, as well as in ChangeLog and README, along
+ with the dates of the alterations. The origin should include at least your
+ name (or your company's name), and an email address to contact for help or
+ issues with the library.
+
+ Note that distributing a compiled zlib library along with zlib.h and
+ zconf.h is also a source distribution, and so you should change
+ ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
+ in zlib.h as you would for a full source distribution.
+
+25. Will zlib work on a big-endian or little-endian architecture, and can I
+ exchange compressed data between them?
+
+ Yes and yes.
+
+26. Will zlib work on a 64-bit machine?
+
+ Yes. It has been tested on 64-bit machines, and has no dependence on any
+ data types being limited to 32-bits in length. If you have any
+ difficulties, please provide a complete problem report to zlib@gzip.org
+
+27. Will zlib decompress data from the PKWare Data Compression Library?
+
+ No. The PKWare DCL uses a completely different compressed data format than
+ does PKZIP and zlib. However, you can look in zlib's contrib/blast
+ directory for a possible solution to your problem.
+
+28. Can I access data randomly in a compressed stream?
+
+ No, not without some preparation. If when compressing you periodically use
+ Z_FULL_FLUSH, carefully write all the pending data at those points, and
+ keep an index of those locations, then you can start decompression at those
+ points. You have to be careful to not use Z_FULL_FLUSH too often, since it
+ can significantly degrade compression. Alternatively, you can scan a
+ deflate stream once to generate an index, and then use that index for
+ random access. See examples/zran.c .
+
+29. Does zlib work on MVS, OS/390, CICS, etc.?
+
+ It has in the past, but we have not heard of any recent evidence. There
+ were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+ If you know of recent, successful applications of zlib on these operating
+ systems, please let us know. Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at to
+ understand the deflate format?
+
+ First off, you should read RFC 1951. Second, yes. Look in zlib's
+ contrib/puff directory.
+
+31. Does zlib infringe on any patents?
+
+ As far as we know, no. In fact, that was originally the whole point behind
+ zlib. Look here for some more information:
+
+ http://www.gzip.org/#faq11
+
+32. Can zlib work with greater than 4 GB of data?
+
+ Yes. inflate() and deflate() will process any amount of data correctly.
+ Each call of inflate() or deflate() is limited to input and output chunks
+ of the maximum value that can be stored in the compiler's "unsigned int"
+ type, but there is no limit to the number of chunks. Note however that the
+ strm.total_in and strm_total_out counters may be limited to 4 GB. These
+ counters are provided as a convenience and are not used internally by
+ inflate() or deflate(). The application can easily set up its own counters
+ updated after each call of inflate() or deflate() to count beyond 4 GB.
+ compress() and uncompress() may be limited to 4 GB, since they operate in a
+ single call. gzseek() and gztell() may be limited to 4 GB depending on how
+ zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+
+ The word "may" appears several times above since there is a 4 GB limit only
+ if the compiler's "long" type is 32 bits. If the compiler's "long" type is
+ 64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+ The only one that we are aware of is potentially in gzprintf(). If zlib is
+ compiled to use sprintf() or vsprintf(), then there is no protection
+ against a buffer overflow of an 8K string space (or other value as set by
+ gzbuffer()), other than the caller of gzprintf() assuring that the output
+ will not exceed 8K. On the other hand, if zlib is compiled to use
+ snprintf() or vsnprintf(), which should normally be the case, then there is
+ no vulnerability. The ./configure script will display warnings if an
+ insecure variation of sprintf() will be used by gzprintf(). Also the
+ zlibCompileFlags() function will return information on what variant of
+ sprintf() is used by gzprintf().
+
+ If you don't have snprintf() or vsnprintf() and would like one, you can
+ find a portable implementation here:
+
+ http://www.ijs.si/software/snprintf/
+
+ Note that you should be using the most recent version of zlib. Versions
+ 1.1.3 and before were subject to a double-free vulnerability, and versions
+ 1.2.1 and 1.2.2 were subject to an access exception when decompressing
+ invalid compressed data.
+
+34. Is there a Java version of zlib?
+
+ Probably what you want is to use zlib in Java. zlib is already included
+ as part of the Java SDK in the java.util.zip package. If you really want
+ a version of zlib written in the Java language, look on the zlib home
+ page for links: http://zlib.net/ .
+
+35. I get this or that compiler or source-code scanner warning when I crank it
+ up to maximally-pedantic. Can't you guys write proper code?
+
+ Many years ago, we gave up attempting to avoid warnings on every compiler
+ in the universe. It just got to be a waste of time, and some compilers
+ were downright silly as well as contradicted each other. So now, we simply
+ make sure that the code always works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+ performing a conditional jump that depends on an uninitialized value.
+ Isn't that a bug?
+
+ No. That is intentional for performance reasons, and the output of deflate
+ is not affected. This only started showing up recently since zlib 1.2.x
+ uses malloc() by default for allocations, whereas earlier versions used
+ calloc(), which zeros out the allocated memory. Even though the code was
+ correct, versions 1.2.4 and later was changed to not stimulate these
+ checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
+ data format?
+
+ Probably not. Look in the comp.compression FAQ for pointers to various
+ formats and associated software.
+
+38. How can I encrypt/decrypt zip files with zlib?
+
+ zlib doesn't support encryption. The original PKZIP encryption is very
+ weak and can be broken with freely available programs. To get strong
+ encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+ compression. For PKZIP compatible "encryption", look at
+ http://www.info-zip.org/
+
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+
+ "gzip" is the gzip format, and "deflate" is the zlib format. They should
+ probably have called the second one "zlib" instead to avoid confusion with
+ the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+ correctly points to the zlib specification in RFC 1950 for the "deflate"
+ transfer encoding, there have been reports of servers and browsers that
+ incorrectly produce or expect raw deflate data per the deflate
+ specification in RFC 1951, most notably Microsoft. So even though the
+ "deflate" transfer encoding using the zlib format would be the more
+ efficient approach (and in fact exactly what the zlib format was designed
+ for), using the "gzip" transfer encoding is probably more reliable due to
+ an unfortunate choice of name on the part of the HTTP 1.1 authors.
+
+ Bottom line: use the gzip format for HTTP 1.1 encoding.
+
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+ No. PKWare has apparently decided to keep that format proprietary, since
+ they have not documented it as they have previous compression formats. In
+ any case, the compression improvements are so modest compared to other more
+ modern approaches, that it's not worth the effort to implement.
+
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+ There are no zip functions in zlib. You are probably using minizip by
+ Giles Vollant, which is found in the contrib directory of zlib. It is not
+ part of zlib. In fact none of the stuff in contrib is part of zlib. The
+ files in there are not supported by the zlib authors. You need to contact
+ the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+ Since it's part of zlib, doesn't that mean that all of zlib falls under the
+ GNU GPL?
+
+ No. The files in contrib are not part of zlib. They were contributed by
+ other authors and are provided as a convenience to the user within the zlib
+ distribution. Each item in contrib has its own license.
+
+43. Is zlib subject to export controls? What is its ECCN?
+
+ zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
+ so that we can use your software in our product?
+
+ No. Go away. Shoo.
--- /dev/null
+CMakeLists.txt cmake build file
+ChangeLog history of changes
+FAQ Frequently Asked Questions about zlib
+INDEX this file
+Makefile dummy Makefile that tells you to ./configure
+Makefile.in template for Unix Makefile
+README guess what
+configure configure script for Unix
+make_vms.com makefile for VMS
+test/example.c zlib usages examples for build testing
+test/minigzip.c minimal gzip-like functionality for build testing
+test/infcover.c inf*.c code coverage for build coverage testing
+treebuild.xml XML description of source file dependencies
+zconf.h.cmakein zconf.h template for cmake
+zconf.h.in zconf.h template for configure
+zlib.3 Man page for zlib
+zlib.3.pdf Man page in PDF format
+zlib.map Linux symbol information
+zlib.pc.in Template for pkg-config descriptor
+zlib.pc.cmakein zlib.pc template for cmake
+zlib2ansi perl script to convert source files for C++ compilation
+
+amiga/ makefiles for Amiga SAS C
+as400/ makefiles for AS/400
+doc/ documentation for formats and algorithms
+msdos/ makefiles for MSDOS
+nintendods/ makefile for Nintendo DS
+old/ makefiles for various architectures and zlib documentation
+ files that have not yet been updated for zlib 1.2.x
+qnx/ makefiles for QNX
+watcom/ makefiles for OpenWatcom
+win32/ makefiles for Windows
+
+ zlib public header files (required for library use):
+zconf.h
+zlib.h
+
+ private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+crc32.h
+deflate.c
+deflate.h
+gzclose.c
+gzguts.h
+gzlib.c
+gzread.c
+gzwrite.c
+infback.c
+inffast.c
+inffast.h
+inffixed.h
+inflate.c
+inflate.h
+inftrees.c
+inftrees.h
+trees.c
+trees.h
+uncompr.c
+zutil.c
+zutil.h
+
+ source files for sample programs
+See examples/README.examples
+
+ unsupported contributions by third parties
+See contrib/README.contrib
--- /dev/null
+all:
+ -@echo "Please use ./configure first. Thank you."
+
+distclean:
+ make -f Makefile.in distclean
--- /dev/null
+# Makefile for zlib
+# Copyright (C) 1995-2013 Jean-loup Gailly, Mark Adler
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# ./configure; make test
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+
+# To use the asm code, type:
+# cp contrib/asm?86/match.S ./match.S
+# make LOC=-DASMV OBJA=match.o
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+# make install
+# To install in $HOME instead of /usr/local, use:
+# make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+SFLAGS=-O
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+STATICLIB=libz.a
+SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.8
+SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIBV)
+
+AR=ar
+ARFLAGS=rc
+RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
+TAR=tar
+SHELL=/bin/sh
+EXE=
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
+includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
+
+OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
+OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
+OBJC = $(OBJZ) $(OBJG)
+
+PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo
+PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
+PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
+OBJA =
+PIC_OBJA =
+
+OBJS = $(OBJC) $(OBJA)
+
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)
+
+check: test
+
+test: all teststatic testshared
+
+teststatic: static
+ @TMPST=tmpst_$$; \
+ if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; false; \
+ fi; \
+ rm -f $$TMPST
+
+testshared: shared
+ @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+ DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+ SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+ TMPSH=tmpsh_$$; \
+ if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
+ echo ' *** zlib shared test OK ***'; \
+ else \
+ echo ' *** zlib shared test FAILED ***'; false; \
+ fi; \
+ rm -f $$TMPSH
+
+test64: all64
+ @TMP64=tmp64_$$; \
+ if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
+ echo ' *** zlib 64-bit test OK ***'; \
+ else \
+ echo ' *** zlib 64-bit test FAILED ***'; false; \
+ fi; \
+ rm -f $$TMP64
+
+infcover.o: test/infcover.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c
+
+infcover: infcover.o libz.a
+ $(CC) $(CFLAGS) -o $@ infcover.o libz.a
+
+cover: infcover
+ rm -f *.gcda
+ ./infcover
+ gcov inf*.c
+
+libz.a: $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+
+match.lo: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c -fPIC _match.s
+ mv _match.o match.lo
+ rm -f _match.s
+
+example.o: test/example.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ test/example.c
+
+minigzip.o: test/minigzip.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
+
+example64.o: test/example.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/example.c
+
+minigzip64.o: test/minigzip.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/minigzip.c
+
+.SUFFIXES: .lo
+
+.c.lo:
+ -@mkdir objs 2>/dev/null || test -d objs
+ $(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+ -@mv objs/$*.o $@
+
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
+ $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
+ rm -f $(SHAREDLIB) $(SHAREDLIBM)
+ ln -s $@ $(SHAREDLIB)
+ ln -s $@ $(SHAREDLIBM)
+ -@rmdir objs
+
+example$(EXE): example.o $(STATICLIB)
+ $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
+
+minigzip$(EXE): minigzip.o $(STATICLIB)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
+
+examplesh$(EXE): example.o $(SHAREDLIBV)
+ $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+ $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+ $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+ $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+
+install-libs: $(LIBS)
+ -@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+ -@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi
+ -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
+ -@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+ -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+ cp $(STATICLIB) $(DESTDIR)$(libdir)
+ chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
+ -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
+ -@if test -n "$(SHAREDLIBV)"; then \
+ cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
+ echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
+ chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+ echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+ rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+ ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+ ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+ ($(LDCONFIG) || true) >/dev/null 2>&1; \
+ fi
+ cp zlib.3 $(DESTDIR)$(man3dir)
+ chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+ cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+ chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+install: install-libs
+ -@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi
+ cp zlib.h zconf.h $(DESTDIR)$(includedir)
+ chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+
+uninstall:
+ cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
+ cd $(DESTDIR)$(libdir) && rm -f libz.a; \
+ if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+ rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
+ fi
+ cd $(DESTDIR)$(man3dir) && rm -f zlib.3
+ cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc
+
+docs: zlib.3.pdf
+
+zlib.3.pdf: zlib.3
+ groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
+
+zconf.h.cmakein: zconf.h.in
+ -@ TEMPFILE=zconfh_$$; \
+ echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
+ sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\
+ touch -r zconf.h.in zconf.h.cmakein &&\
+ rm $$TEMPFILE
+
+zconf: zconf.h.in
+ cp -p zconf.h.in zconf.h
+
+mostlyclean: clean
+clean:
+ rm -f *.o *.lo *~ \
+ example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+ example64$(EXE) minigzip64$(EXE) \
+ infcover \
+ libz.* foo.gz so_locations \
+ _match.s maketree contrib/infback9/*.o
+ rm -rf objs
+ rm -f *.gcda *.gcno *.gcov
+ rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
+
+maintainer-clean: distclean
+distclean: clean zconf zconf.h.cmakein docs
+ rm -f Makefile zlib.pc configure.log
+ -@rm -f .DS_Store
+ -@printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile
+ -@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile
+ -@touch -r Makefile.in Makefile
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o zutil.o: zutil.h zlib.h zconf.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h crc32.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+
+adler32.lo zutil.lo: zutil.h zlib.h zconf.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h
+crc32.lo: zutil.h zlib.h zconf.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h
--- /dev/null
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.8 is a general purpose data compression library. All the code is
+thread safe. The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
+of the library is given in the file test/example.c which also tests that
+the library is working correctly. Another example is given in the file
+test/minigzip.c. The compression library itself is composed of all source
+files in the root directory.
+
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile.in. In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix. For Windows, use
+one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use
+make_vms.com.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
+<info@winimage.com> for the Windows DLL version. The zlib home page is
+http://zlib.net/ . Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of Dr. Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
+
+The changes made in version 1.2.8 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory contrib/ .
+
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
+http://docs.python.org/library/zlib.html .
+
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+ -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+ compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+ when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+ necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+ other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS or BEOS.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+
+Acknowledgments:
+
+ The deflate format used by zlib was defined by Phil Katz. The deflate and
+ zlib specifications were written by L. Peter Deutsch. Thanks to all the
+ people who reported problems and suggested various improvements in zlib; they
+ are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign. The sources are provided for free but without
+warranty of any kind. The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes. Please read
+the FAQ for more information on the distribution of modified source versions.
--- /dev/null
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521 /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+ try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+ (thank you to John Reiser for pointing this out) */
+# define CHOP(a) \
+ do { \
+ unsigned long tmp = a >> 16; \
+ a &= 0xffffUL; \
+ a += (tmp << 4) - tmp; \
+ } while (0)
+# define MOD28(a) \
+ do { \
+ CHOP(a); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+# define MOD(a) \
+ do { \
+ CHOP(a); \
+ MOD28(a); \
+ } while (0)
+# define MOD63(a) \
+ do { /* this assumes a is not negative */ \
+ z_off64_t tmp = a >> 32; \
+ a &= 0xffffffffL; \
+ a += (tmp << 8) - (tmp << 5) + tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+#else
+# define MOD(a) a %= BASE
+# define MOD28(a) a %= BASE
+# define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ uInt len;
+{
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD28(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
+ DO16(buf);
+ buf += 16;
+ }
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* for negative len, return invalid adler32 as a clue for debugging */
+ if (len2 < 0)
+ return 0xffffffffUL;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ MOD63(len2); /* assumes len2 >= 0 */
+ rem = (unsigned)len2;
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+ if (sum2 >= BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
--- /dev/null
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+LIBNAME = libzip.a
+
+CC = scppc
+CFLAGS = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+ OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER
+AR = ppc-amigaos-ar cr
+RANLIB = ppc-amigaos-ranlib
+LD = ppc-amigaos-ld -r
+LDFLAGS = -o
+LDLIBS = LIB:scppc.a LIB:end.o
+RM = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+ uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+check: test
+test: all
+ example
+ echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+ $(AR) $@ $(OBJS)
+ -$(RANLIB) $@
+
+example: example.o $(LIBNAME)
+ $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+minigzip: minigzip.o $(LIBNAME)
+ $(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+mostlyclean: clean
+clean:
+ $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+ zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+ descrip.mms *.[ch]
+
+tgz:
+ cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+ zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+ NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
+ DEF=POSTINC
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+ uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+check: test
+test: all
+ example
+ echo hello world | minigzip | minigzip -d
+
+install: z.lib
+ copy clone zlib.h zconf.h INCLUDE:
+ copy clone z.lib LIB:
+
+z.lib: $(OBJS)
+ oml z.lib r $(OBJS)
+
+example: example.o z.lib
+ $(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+ $(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+mostlyclean: clean
+clean:
+ -delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Makefile.sas
+ copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.1.3 entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE ADLER32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("adler32")
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compress")
+ EXPORT SYMBOL("compress2")
+
+/********************************************************************/
+/* *MODULE CRC32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("crc32")
+ EXPORT SYMBOL("get_crc_table")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflate")
+ EXPORT SYMBOL("deflateEnd")
+ EXPORT SYMBOL("deflateSetDictionary")
+ EXPORT SYMBOL("deflateCopy")
+ EXPORT SYMBOL("deflateReset")
+ EXPORT SYMBOL("deflateParams")
+ EXPORT SYMBOL("deflatePrime")
+ EXPORT SYMBOL("deflateInit_")
+ EXPORT SYMBOL("deflateInit2_")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzopen")
+ EXPORT SYMBOL("gzdopen")
+ EXPORT SYMBOL("gzsetparams")
+ EXPORT SYMBOL("gzread")
+ EXPORT SYMBOL("gzwrite")
+ EXPORT SYMBOL("gzprintf")
+ EXPORT SYMBOL("gzputs")
+ EXPORT SYMBOL("gzgets")
+ EXPORT SYMBOL("gzputc")
+ EXPORT SYMBOL("gzgetc")
+ EXPORT SYMBOL("gzflush")
+ EXPORT SYMBOL("gzseek")
+ EXPORT SYMBOL("gzrewind")
+ EXPORT SYMBOL("gztell")
+ EXPORT SYMBOL("gzeof")
+ EXPORT SYMBOL("gzclose")
+ EXPORT SYMBOL("gzerror")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflate")
+ EXPORT SYMBOL("inflateEnd")
+ EXPORT SYMBOL("inflateSetDictionary")
+ EXPORT SYMBOL("inflateSync")
+ EXPORT SYMBOL("inflateReset")
+ EXPORT SYMBOL("inflateInit_")
+ EXPORT SYMBOL("inflateInit2_")
+ EXPORT SYMBOL("inflateSyncPoint")
+
+/********************************************************************/
+/* *MODULE UNCOMPR ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("uncompress")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibVersion")
+ EXPORT SYMBOL("zError")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.1 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compressBound")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflateBound")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzungetc")
+ EXPORT SYMBOL("gzclearerr")
+
+/********************************************************************/
+/* *MODULE INFBACK ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateBack")
+ EXPORT SYMBOL("inflateBackEnd")
+ EXPORT SYMBOL("inflateBackInit_")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateCopy")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibCompileFlags")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.5 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE ADLER32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("adler32_combine")
+ EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/* *MODULE CRC32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("crc32_combine")
+ EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/* *MODULE GZLIB ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzbuffer")
+ EXPORT SYMBOL("gzoffset")
+ EXPORT SYMBOL("gzoffset64")
+ EXPORT SYMBOL("gzopen64")
+ EXPORT SYMBOL("gzseek64")
+ EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/* *MODULE GZREAD ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/* *MODULE GZWRITE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzclose_w")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateMark")
+ EXPORT SYMBOL("inflatePrime")
+ EXPORT SYMBOL("inflateReset2")
+ EXPORT SYMBOL("inflateUndermine")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.6 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflateResetKeep")
+ EXPORT SYMBOL("deflatePending")
+
+/********************************************************************/
+/* *MODULE GZWRITE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzgetc_")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateResetKeep")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.8 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateGetDictionary")
+
+ENDPGMEXP
--- /dev/null
+/******************************************************************************/
+/* */
+/* ZLIB */
+/* */
+/* Compile sources into modules and link them into a service program. */
+/* */
+/******************************************************************************/
+
+ PGM
+
+/* Configuration adjustable parameters. */
+
+ DCL VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Source library. */
+ DCL VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('SOURCES') /* Source member file. */
+ DCL VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('TOOLS') /* Control member file. */
+
+ DCL VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Module library. */
+
+ DCL VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('LGPL') /* Service program library. */
+
+ DCL VAR(&CFLAGS) TYPE(*CHAR) +
+ VALUE('OPTIMIZE(40)') /* Compile options. */
+
+ DCL VAR(&TGTRLS) TYPE(*CHAR) +
+ VALUE('V5R3M0') /* Target release. */
+
+
+/* Working storage. */
+
+ DCL VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300) /* Command length. */
+ DCL VAR(&CMD) TYPE(*CHAR) LEN(512)
+ DCL VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
+
+
+/* Compile sources into modules. */
+
+ CHGVAR VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT +
+ 'SYSIFCOPT(*IFS64IO)' *BCAT +
+ 'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT +
+ '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT +
+ ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT +
+ &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/* Link modules into a service program. */
+
+ CRTSRVPGM SRVPGM(&SRVLIB/ZLIB) +
+ MODULE(&MODLIB/ADLER32 &MODLIB/COMPRESS +
+ &MODLIB/CRC32 &MODLIB/DEFLATE +
+ &MODLIB/GZCLOSE &MODLIB/GZLIB +
+ &MODLIB/GZREAD &MODLIB/GZWRITE +
+ &MODLIB/INFBACK &MODLIB/INFFAST +
+ &MODLIB/INFLATE &MODLIB/INFTREES +
+ &MODLIB/TREES &MODLIB/UNCOMPR +
+ &MODLIB/ZUTIL) +
+ SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
+ TEXT('ZLIB 1.2.8') TGTRLS(&TGTRLS)
+
+ ENDPGM
--- /dev/null
+ ZLIB version 1.2.8 for AS400 installation instructions
+
+I) From an AS400 *SAVF file:
+
+1) Unpacking archive to an AS400 save file
+
+On the AS400:
+
+_ Create the ZLIB AS400 library:
+
+ CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
+
+_ Create a work save file, for example:
+
+ CRTSAVF FILE(ZLIB/ZLIBSAVF)
+
+On a PC connected to the target AS400:
+
+_ Unpack the save file image to a PC file "ZLIBSAVF"
+_ Upload this file into the save file on the AS400, for example
+ using ftp in BINARY mode.
+
+
+2) Populating the ZLIB AS400 source library
+
+On the AS400:
+
+_ Extract the saved objects into the ZLIB AS400 library using:
+
+RSTOBJ OBJ(*ALL) SAVLIB(ZLIB) DEV(*SAVF) SAVF(ZLIB/ZLIBSAVF) RSTLIB(ZLIB)
+
+
+3) Customize installation:
+
+_ Edit CL member ZLIB/TOOLS(COMPILE) and change parameters if needed,
+ according to the comments.
+
+_ Compile this member with:
+
+ CRTCLPGM PGM(ZLIB/COMPILE) SRCFILE(ZLIB/TOOLS) SRCMBR(COMPILE)
+
+
+4) Compile and generate the service program:
+
+_ This can now be done by executing:
+
+ CALL PGM(ZLIB/COMPILE)
+
+
+
+II) From the original source distribution:
+
+1) On the AS400, create the source library:
+
+ CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
+
+2) Create the source files:
+
+ CRTSRCPF FILE(ZLIB/SOURCES) RCDLEN(112) TEXT('ZLIB library modules')
+ CRTSRCPF FILE(ZLIB/H) RCDLEN(112) TEXT('ZLIB library includes')
+ CRTSRCPF FILE(ZLIB/TOOLS) RCDLEN(112) TEXT('ZLIB library control utilities')
+
+3) From the machine hosting the distribution files, upload them (with
+ FTP in text mode, for example) according to the following table:
+
+ Original AS400 AS400 AS400 AS400
+ file file member type description
+ SOURCES Original ZLIB C subprogram sources
+ adler32.c ADLER32 C ZLIB - Compute the Adler-32 checksum of a dta strm
+ compress.c COMPRESS C ZLIB - Compress a memory buffer
+ crc32.c CRC32 C ZLIB - Compute the CRC-32 of a data stream
+ deflate.c DEFLATE C ZLIB - Compress data using the deflation algorithm
+ gzclose.c GZCLOSE C ZLIB - Close .gz files
+ gzlib.c GZLIB C ZLIB - Miscellaneous .gz files IO support
+ gzread.c GZREAD C ZLIB - Read .gz files
+ gzwrite.c GZWRITE C ZLIB - Write .gz files
+ infback.c INFBACK C ZLIB - Inflate using a callback interface
+ inffast.c INFFAST C ZLIB - Fast proc. literals & length/distance pairs
+ inflate.c INFLATE C ZLIB - Interface to inflate modules
+ inftrees.c INFTREES C ZLIB - Generate Huffman trees for efficient decode
+ trees.c TREES C ZLIB - Output deflated data using Huffman coding
+ uncompr.c UNCOMPR C ZLIB - Decompress a memory buffer
+ zutil.c ZUTIL C ZLIB - Target dependent utility functions
+ H Original ZLIB C and ILE/RPG include files
+ crc32.h CRC32 C ZLIB - CRC32 tables
+ deflate.h DEFLATE C ZLIB - Internal compression state
+ gzguts.h GZGUTS C ZLIB - Definitions for the gzclose module
+ inffast.h INFFAST C ZLIB - Header to use inffast.c
+ inffixed.h INFFIXED C ZLIB - Table for decoding fixed codes
+ inflate.h INFLATE C ZLIB - Internal inflate state definitions
+ inftrees.h INFTREES C ZLIB - Header to use inftrees.c
+ trees.h TREES C ZLIB - Created automatically with -DGEN_TREES_H
+ zconf.h ZCONF C ZLIB - Compression library configuration
+ zlib.h ZLIB C ZLIB - Compression library C user interface
+ as400/zlib.inc ZLIB.INC RPGLE ZLIB - Compression library ILE RPG user interface
+ zutil.h ZUTIL C ZLIB - Internal interface and configuration
+ TOOLS Building source software & AS/400 README
+ as400/bndsrc BNDSRC Entry point exportation list
+ as400/compile.clp COMPILE CLP Compile sources & generate service program
+ as400/readme.txt README TXT Installation instructions
+
+4) Continue as in I)3).
+
+
+
+
+Notes: For AS400 ILE RPG programmers, a /copy member defining the ZLIB
+ API prototypes for ILE RPG can be found in ZLIB/H(ZLIB.INC).
+ Please read comments in this member for more information.
+
+ Remember that most foreign textual data are ASCII coded: this
+ implementation does not handle conversion from/to ASCII, so
+ text data code conversions must be done explicitely.
+
+ Mainly for the reason above, always open zipped files in binary mode.
--- /dev/null
+ * ZLIB.INC - Interface to the general purpose compression library
+ *
+ * ILE RPG400 version by Patrick Monnerat, DATASPHERE.
+ * Version 1.2.8
+ *
+ *
+ * WARNING:
+ * Procedures inflateInit(), inflateInit2(), deflateInit(),
+ * deflateInit2() and inflateBackInit() need to be called with
+ * two additional arguments:
+ * the package version string and the stream control structure.
+ * size. This is needed because RPG lacks some macro feature.
+ * Call these procedures as:
+ * inflateInit(...: ZLIB_VERSION: %size(z_stream))
+ *
+ /if not defined(ZLIB_H_)
+ /define ZLIB_H_
+ *
+ **************************************************************************
+ * Constants
+ **************************************************************************
+ *
+ * Versioning information.
+ *
+ D ZLIB_VERSION C '1.2.8'
+ D ZLIB_VERNUM C X'1280'
+ D ZLIB_VER_MAJOR C 1
+ D ZLIB_VER_MINOR C 2
+ D ZLIB_VER_REVISION...
+ D C 8
+ D ZLIB_VER_SUBREVISION...
+ D C 0
+ *
+ * Other equates.
+ *
+ D Z_NO_FLUSH C 0
+ D Z_PARTIAL_FLUSH...
+ D C 1
+ D Z_SYNC_FLUSH C 2
+ D Z_FULL_FLUSH C 3
+ D Z_FINISH C 4
+ D Z_BLOCK C 5
+ D Z_TREES C 6
+ *
+ D Z_OK C 0
+ D Z_STREAM_END C 1
+ D Z_NEED_DICT C 2
+ D Z_ERRNO C -1
+ D Z_STREAM_ERROR C -2
+ D Z_DATA_ERROR C -3
+ D Z_MEM_ERROR C -4
+ D Z_BUF_ERROR C -5
+ DZ_VERSION_ERROR C -6
+ *
+ D Z_NO_COMPRESSION...
+ D C 0
+ D Z_BEST_SPEED C 1
+ D Z_BEST_COMPRESSION...
+ D C 9
+ D Z_DEFAULT_COMPRESSION...
+ D C -1
+ *
+ D Z_FILTERED C 1
+ D Z_HUFFMAN_ONLY C 2
+ D Z_RLE C 3
+ D Z_DEFAULT_STRATEGY...
+ D C 0
+ *
+ D Z_BINARY C 0
+ D Z_ASCII C 1
+ D Z_UNKNOWN C 2
+ *
+ D Z_DEFLATED C 8
+ *
+ D Z_NULL C 0
+ *
+ **************************************************************************
+ * Types
+ **************************************************************************
+ *
+ D z_streamp S * Stream struct ptr
+ D gzFile S * File pointer
+ D z_off_t S 10i 0 Stream offsets
+ D z_off64_t S 20i 0 Stream offsets
+ *
+ **************************************************************************
+ * Structures
+ **************************************************************************
+ *
+ * The GZIP encode/decode stream support structure.
+ *
+ D z_stream DS align based(z_streamp)
+ D zs_next_in * Next input byte
+ D zs_avail_in 10U 0 Byte cnt at next_in
+ D zs_total_in 10U 0 Total bytes read
+ D zs_next_out * Output buffer ptr
+ D zs_avail_out 10U 0 Room left @ next_out
+ D zs_total_out 10U 0 Total bytes written
+ D zs_msg * Last errmsg or null
+ D zs_state * Internal state
+ D zs_zalloc * procptr Int. state allocator
+ D zs_free * procptr Int. state dealloc.
+ D zs_opaque * Private alloc. data
+ D zs_data_type 10i 0 ASC/BIN best guess
+ D zs_adler 10u 0 Uncompr. adler32 val
+ D 10U 0 Reserved
+ D 10U 0 Ptr. alignment
+ *
+ **************************************************************************
+ * Utility function prototypes
+ **************************************************************************
+ *
+ D compress PR 10I 0 extproc('compress')
+ D dest 65535 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 65535 const options(*varsize) Source buffer
+ D sourceLen 10u 0 value Source length
+ *
+ D compress2 PR 10I 0 extproc('compress2')
+ D dest 65535 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 65535 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ D level 10I 0 value Compression level
+ *
+ D compressBound PR 10U 0 extproc('compressBound')
+ D sourceLen 10U 0 value
+ *
+ D uncompress PR 10I 0 extproc('uncompress')
+ D dest 65535 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 65535 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ *
+ /if not defined(LARGE_FILES)
+ D gzopen PR extproc('gzopen')
+ D like(gzFile)
+ D path * value options(*string) File pathname
+ D mode * value options(*string) Open mode
+ /else
+ D gzopen PR extproc('gzopen64')
+ D like(gzFile)
+ D path * value options(*string) File pathname
+ D mode * value options(*string) Open mode
+ *
+ D gzopen64 PR extproc('gzopen64')
+ D like(gzFile)
+ D path * value options(*string) File pathname
+ D mode * value options(*string) Open mode
+ /endif
+ *
+ D gzdopen PR extproc('gzdopen')
+ D like(gzFile)
+ D fd 10I 0 value File descriptor
+ D mode * value options(*string) Open mode
+ *
+ D gzbuffer PR 10I 0 extproc('gzbuffer')
+ D file value like(gzFile) File pointer
+ D size 10U 0 value
+ *
+ D gzsetparams PR 10I 0 extproc('gzsetparams')
+ D file value like(gzFile) File pointer
+ D level 10I 0 value
+ D strategy 10I 0 value
+ *
+ D gzread PR 10I 0 extproc('gzread')
+ D file value like(gzFile) File pointer
+ D buf 65535 options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzwrite PR 10I 0 extproc('gzwrite')
+ D file value like(gzFile) File pointer
+ D buf 65535 const options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzputs PR 10I 0 extproc('gzputs')
+ D file value like(gzFile) File pointer
+ D s * value options(*string) String to output
+ *
+ D gzgets PR * extproc('gzgets')
+ D file value like(gzFile) File pointer
+ D buf 65535 options(*varsize) Read buffer
+ D len 10i 0 value Buffer length
+ *
+ D gzputc PR 10i 0 extproc('gzputc')
+ D file value like(gzFile) File pointer
+ D c 10I 0 value Character to write
+ *
+ D gzgetc PR 10i 0 extproc('gzgetc')
+ D file value like(gzFile) File pointer
+ *
+ D gzgetc_ PR 10i 0 extproc('gzgetc_')
+ D file value like(gzFile) File pointer
+ *
+ D gzungetc PR 10i 0 extproc('gzungetc')
+ D c 10I 0 value Character to push
+ D file value like(gzFile) File pointer
+ *
+ D gzflush PR 10i 0 extproc('gzflush')
+ D file value like(gzFile) File pointer
+ D flush 10I 0 value Type of flush
+ *
+ /if not defined(LARGE_FILES)
+ D gzseek PR extproc('gzseek')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ D offset value like(z_off_t) Offset
+ D whence 10i 0 value Origin
+ /else
+ D gzseek PR extproc('gzseek64')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ D offset value like(z_off_t) Offset
+ D whence 10i 0 value Origin
+ *
+ D gzseek64 PR extproc('gzseek64')
+ D like(z_off64_t)
+ D file value like(gzFile) File pointer
+ D offset value like(z_off64_t) Offset
+ D whence 10i 0 value Origin
+ /endif
+ *
+ D gzrewind PR 10i 0 extproc('gzrewind')
+ D file value like(gzFile) File pointer
+ *
+ /if not defined(LARGE_FILES)
+ D gztell PR extproc('gztell')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ /else
+ D gztell PR extproc('gztell64')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ *
+ D gztell64 PR extproc('gztell64')
+ D like(z_off64_t)
+ D file value like(gzFile) File pointer
+ /endif
+ *
+ /if not defined(LARGE_FILES)
+ D gzoffset PR extproc('gzoffset')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ /else
+ D gzoffset PR extproc('gzoffset64')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ *
+ D gzoffset64 PR extproc('gzoffset64')
+ D like(z_off64_t)
+ D file value like(gzFile) File pointer
+ /endif
+ *
+ D gzeof PR 10i 0 extproc('gzeof')
+ D file value like(gzFile) File pointer
+ *
+ D gzclose_r PR 10i 0 extproc('gzclose_r')
+ D file value like(gzFile) File pointer
+ *
+ D gzclose_w PR 10i 0 extproc('gzclose_w')
+ D file value like(gzFile) File pointer
+ *
+ D gzclose PR 10i 0 extproc('gzclose')
+ D file value like(gzFile) File pointer
+ *
+ D gzerror PR * extproc('gzerror') Error string
+ D file value like(gzFile) File pointer
+ D errnum 10I 0 Error code
+ *
+ D gzclearerr PR extproc('gzclearerr')
+ D file value like(gzFile) File pointer
+ *
+ **************************************************************************
+ * Basic function prototypes
+ **************************************************************************
+ *
+ D zlibVersion PR * extproc('zlibVersion') Version string
+ *
+ D deflateInit PR 10I 0 extproc('deflateInit_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflate PR 10I 0 extproc('deflate') Compress data
+ D strm like(z_stream) Compression stream
+ D flush 10I 0 value Flush type required
+ *
+ D deflateEnd PR 10I 0 extproc('deflateEnd') Termin. compression
+ D strm like(z_stream) Compression stream
+ *
+ D inflateInit PR 10I 0 extproc('inflateInit_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflate PR 10I 0 extproc('inflate') Expand data
+ D strm like(z_stream) Expansion stream
+ D flush 10I 0 value Flush type required
+ *
+ D inflateEnd PR 10I 0 extproc('inflateEnd') Termin. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ **************************************************************************
+ * Advanced function prototypes
+ **************************************************************************
+ *
+ D deflateInit2 PR 10I 0 extproc('deflateInit2_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D method 10I 0 value Compression method
+ D windowBits 10I 0 value log2(window size)
+ D memLevel 10I 0 value Mem/cmpress tradeoff
+ D strategy 10I 0 value Compression stategy
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflateSetDictionary...
+ D PR 10I 0 extproc('deflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Compression stream
+ D dictionary 65535 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D deflateCopy PR 10I 0 extproc('deflateCopy') Compress strm 2 strm
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D deflateReset PR 10I 0 extproc('deflateReset') End and init. stream
+ D strm like(z_stream) Compression stream
+ *
+ D deflateParams PR 10I 0 extproc('deflateParams') Change level & strat
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D strategy 10I 0 value Compression stategy
+ *
+ D deflateBound PR 10U 0 extproc('deflateBound') Change level & strat
+ D strm like(z_stream) Compression stream
+ D sourcelen 10U 0 value Compression level
+ *
+ D deflatePending PR 10I 0 extproc('deflatePending') Change level & strat
+ D strm like(z_stream) Compression stream
+ D pending 10U 0 Pending bytes
+ D bits 10I 0 Pending bits
+ *
+ D deflatePrime PR 10I 0 extproc('deflatePrime') Change level & strat
+ D strm like(z_stream) Compression stream
+ D bits 10I 0 value # of bits to insert
+ D value 10I 0 value Bits to insert
+ *
+ D inflateInit2 PR 10I 0 extproc('inflateInit2_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value log2(window size)
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateSetDictionary...
+ D PR 10I 0 extproc('inflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Expansion stream
+ D dictionary 65535 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D inflateGetDictionary...
+ D PR 10I 0 extproc('inflateGetDictionary') Get dictionary
+ D strm like(z_stream) Expansion stream
+ D dictionary 65535 options(*varsize) Dictionary bytes
+ D dictLength 10U 0 Dictionary length
+ *
+ D inflateSync PR 10I 0 extproc('inflateSync') Sync. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateCopy PR 10I 0 extproc('inflateCopy')
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D inflateReset PR 10I 0 extproc('inflateReset') End and init. stream
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateReset2 PR 10I 0 extproc('inflateReset2') End and init. stream
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value Log2(buffer size)
+ *
+ D inflatePrime PR 10I 0 extproc('inflatePrime') Insert bits
+ D strm like(z_stream) Expansion stream
+ D bits 10I 0 value Bit count
+ D value 10I 0 value Bits to insert
+ *
+ D inflateMark PR 10I 0 extproc('inflateMark') Get inflate info
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateBackInit...
+ D PR 10I 0 extproc('inflateBackInit_')
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value Log2(buffer size)
+ D window 65535 options(*varsize) Buffer
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateBack PR 10I 0 extproc('inflateBack')
+ D strm like(z_stream) Expansion stream
+ D in * value procptr Input function
+ D in_desc * value Input descriptor
+ D out * value procptr Output function
+ D out_desc * value Output descriptor
+ *
+ D inflateBackEnd PR 10I 0 extproc('inflateBackEnd')
+ D strm like(z_stream) Expansion stream
+ *
+ D zlibCompileFlags...
+ D PR 10U 0 extproc('zlibCompileFlags')
+ *
+ **************************************************************************
+ * Checksum function prototypes
+ **************************************************************************
+ *
+ D adler32 PR 10U 0 extproc('adler32') New checksum
+ D adler 10U 0 value Old checksum
+ D buf 65535 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ D crc32 PR 10U 0 extproc('crc32') New checksum
+ D crc 10U 0 value Old checksum
+ D buf 65535 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ **************************************************************************
+ * Miscellaneous function prototypes
+ **************************************************************************
+ *
+ D zError PR * extproc('zError') Error string
+ D err 10I 0 value Error code
+ *
+ D inflateSyncPoint...
+ D PR 10I 0 extproc('inflateSyncPoint')
+ D strm like(z_stream) Expansion stream
+ *
+ D get_crc_table PR * extproc('get_crc_table') Ptr to ulongs
+ *
+ D inflateUndermine...
+ D PR 10I 0 extproc('inflateUndermine')
+ D strm like(z_stream) Expansion stream
+ D arg 10I 0 value Error code
+ *
+ D inflateResetKeep...
+ D PR 10I 0 extproc('inflateResetKeep') End and init. stream
+ D strm like(z_stream) Expansion stream
+ *
+ D deflateResetKeep...
+ D PR 10I 0 extproc('deflateResetKeep') End and init. stream
+ D strm like(z_stream) Expansion stream
+ *
+ /endif
--- /dev/null
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+ int level;
+{
+ z_stream stream;
+ int err;
+
+ stream.next_in = (z_const Bytef *)source;
+ stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+ /* Check for source > 64K on 16-bit machine: */
+ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+ stream.next_out = dest;
+ stream.avail_out = (uInt)*destLen;
+ if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+ stream.zalloc = (alloc_func)0;
+ stream.zfree = (free_func)0;
+ stream.opaque = (voidpf)0;
+
+ err = deflateInit(&stream, level);
+ if (err != Z_OK) return err;
+
+ err = deflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ deflateEnd(&stream);
+ return err == Z_OK ? Z_BUF_ERROR : err;
+ }
+ *destLen = stream.total_out;
+
+ err = deflateEnd(&stream);
+ return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+{
+ return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+ If the default memLevel or windowBits for deflateInit() is changed, then
+ this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+ uLong sourceLen;
+{
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+ (sourceLen >> 25) + 13;
+}
--- /dev/null
+#!/bin/sh
+# configure script for zlib.
+#
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+#
+# To impose specific compiler or flags or install directory, use for example:
+# prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+# start off configure.log
+echo -------------------- >> configure.log
+echo $0 $* >> configure.log
+date >> configure.log
+
+# set command prefix for cross-compilation
+if [ -n "${CHOST}" ]; then
+ uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
+ CROSS_PREFIX="${CHOST}-"
+fi
+
+# destination name for static library
+STATICLIB=libz.a
+
+# extract zlib version numbers from zlib.h
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
+VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
+VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+
+# establish commands for library building
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+ AR=${AR-"${CROSS_PREFIX}ar"}
+ test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
+else
+ AR=${AR-"ar"}
+ test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
+fi
+ARFLAGS=${ARFLAGS-"rc"}
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+ RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+ test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log
+else
+ RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+ NM=${NM-"${CROSS_PREFIX}nm"}
+ test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log
+else
+ NM=${NM-"nm"}
+fi
+
+# set defaults before processing command line options
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
+includedir=${includedir-'${prefix}/include'}
+mandir=${mandir-'${prefix}/share/man'}
+shared_ext='.so'
+shared=1
+solo=0
+cover=0
+zprefix=0
+zconst=0
+build64=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+OBJC='$(OBJZ) $(OBJG)'
+PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
+
+# leave this script, optionally in a bad way
+leave()
+{
+ if test "$*" != "0"; then
+ echo "** $0 aborting." | tee -a configure.log
+ fi
+ rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version
+ echo -------------------- >> configure.log
+ echo >> configure.log
+ echo >> configure.log
+ exit $1
+}
+
+# process command line options
+while test $# -ge 1
+do
+case "$1" in
+ -h* | --help)
+ echo 'usage:' | tee -a configure.log
+ echo ' configure [--const] [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]' | tee -a configure.log
+ echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log
+ echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log
+ exit 0 ;;
+ -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+ -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+ -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
+ --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
+ -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
+ -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
+ -p* | --prefix) prefix="$2"; shift; shift ;;
+ -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
+ -l* | --libdir) libdir="$2"; shift; shift ;;
+ -i* | --includedir) includedir="$2"; shift; shift ;;
+ -s* | --shared | --enable-shared) shared=1; shift ;;
+ -t | --static) shared=0; shift ;;
+ --solo) solo=1; shift ;;
+ --cover) cover=1; shift ;;
+ -z* | --zprefix) zprefix=1; shift ;;
+ -6* | --64) build64=1; shift ;;
+ -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
+ --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;;
+ --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;;
+ -c* | --const) zconst=1; shift ;;
+ *)
+ echo "unknown option: $1" | tee -a configure.log
+ echo "$0 --help for help" | tee -a configure.log
+ leave 1;;
+ esac
+done
+
+# temporary file name
+test=ztest$$
+
+# put arguments in log, also put test file in log if used in arguments
+show()
+{
+ case "$*" in
+ *$test.c*)
+ echo === $test.c === >> configure.log
+ cat $test.c >> configure.log
+ echo === >> configure.log;;
+ esac
+ echo $* >> configure.log
+}
+
+# check for gcc vs. cc and set compile and link flags based on the system identified by uname
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
+cc=${CC-${CROSS_PREFIX}gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+ *gcc*) gcc=1 ;;
+ *clang*) gcc=1 ;;
+esac
+case `$cc -v 2>&1` in
+ *gcc*) gcc=1 ;;
+esac
+
+show $cc -c $test.c
+if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
+ echo ... using gcc >> configure.log
+ CC="$cc"
+ CFLAGS="${CFLAGS--O3} ${ARCHS}"
+ SFLAGS="${CFLAGS--O3} -fPIC"
+ LDFLAGS="${LDFLAGS} ${ARCHS}"
+ if test $build64 -eq 1; then
+ CFLAGS="${CFLAGS} -m64"
+ SFLAGS="${SFLAGS} -m64"
+ fi
+ if test "${ZLIBGCCWARN}" = "YES"; then
+ if test "$zconst" -eq 1; then
+ CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST"
+ else
+ CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
+ fi
+ fi
+ if test -z "$uname"; then
+ uname=`(uname -s || echo unknown) 2>/dev/null`
+ fi
+ case "$uname" in
+ Linux* | linux* | GNU | GNU/* | solaris*)
+ LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+ *BSD | *bsd* | DragonFly)
+ LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"}
+ LDCONFIG="ldconfig -m" ;;
+ CYGWIN* | Cygwin* | cygwin* | OS/2*)
+ EXE='.exe' ;;
+ MINGW* | mingw*)
+# temporary bypass
+ rm -f $test.[co] $test $test$shared_ext
+ echo "Please use win32/Makefile.gcc instead." | tee -a configure.log
+ leave 1
+ LDSHARED=${LDSHARED-"$cc -shared"}
+ LDSHAREDLIBC=""
+ EXE='.exe' ;;
+ QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
+ # (alain.bonnefoy@icbt.com)
+ LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
+ HP-UX*)
+ LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so' ;;
+ *)
+ shared_ext='.sl'
+ SHAREDLIB='libz.sl' ;;
+ esac ;;
+ Darwin* | darwin*)
+ shared_ext='.dylib'
+ SHAREDLIB=libz$shared_ext
+ SHAREDLIBV=libz.$VER$shared_ext
+ SHAREDLIBM=libz.$VER1$shared_ext
+ LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+ if libtool -V 2>&1 | grep Apple > /dev/null; then
+ AR="libtool"
+ else
+ AR="/usr/bin/libtool"
+ fi
+ ARFLAGS="-o" ;;
+ *) LDSHARED=${LDSHARED-"$cc -shared"} ;;
+ esac
+else
+ # find system name and corresponding cc options
+ CC=${CC-cc}
+ gcc=0
+ echo ... using $CC >> configure.log
+ if test -z "$uname"; then
+ uname=`(uname -sr || echo unknown) 2>/dev/null`
+ fi
+ case "$uname" in
+ HP-UX*) SFLAGS=${CFLAGS-"-O +z"}
+ CFLAGS=${CFLAGS-"-O"}
+# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+ LDSHARED=${LDSHARED-"ld -b"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so' ;;
+ *)
+ shared_ext='.sl'
+ SHAREDLIB='libz.sl' ;;
+ esac ;;
+ IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+ CFLAGS=${CFLAGS-"-ansi -O2"}
+ LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+ OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+ CFLAGS=${CFLAGS-"-O -std1"}
+ LDFLAGS="${LDFLAGS} -Wl,-rpath,."
+ LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
+ OSF1*) SFLAGS=${CFLAGS-"-O -std1"}
+ CFLAGS=${CFLAGS-"-O -std1"}
+ LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+ QNX*) SFLAGS=${CFLAGS-"-4 -O"}
+ CFLAGS=${CFLAGS-"-4 -O"}
+ LDSHARED=${LDSHARED-"cc"}
+ RANLIB=${RANLIB-"true"}
+ AR="cc"
+ ARFLAGS="-A" ;;
+ SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+ CFLAGS=${CFLAGS-"-O3"}
+ LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
+ SunOS\ 5* | solaris*)
+ LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"}
+ SFLAGS=${CFLAGS-"-fast -KPIC"}
+ CFLAGS=${CFLAGS-"-fast"}
+ if test $build64 -eq 1; then
+ # old versions of SunPRO/Workshop/Studio don't support -m64,
+ # but newer ones do. Check for it.
+ flag64=`$CC -flags | egrep -- '^-m64'`
+ if test x"$flag64" != x"" ; then
+ CFLAGS="${CFLAGS} -m64"
+ SFLAGS="${SFLAGS} -m64"
+ else
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ i86*)
+ SFLAGS="$SFLAGS -xarch=amd64"
+ CFLAGS="$CFLAGS -xarch=amd64" ;;
+ *)
+ SFLAGS="$SFLAGS -xarch=v9"
+ CFLAGS="$CFLAGS -xarch=v9" ;;
+ esac
+ fi
+ fi
+ ;;
+ SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+ CFLAGS=${CFLAGS-"-O2"}
+ LDSHARED=${LDSHARED-"ld"} ;;
+ SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+ CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"}
+ LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
+ UNIX_System_V\ 4.2.0)
+ SFLAGS=${CFLAGS-"-KPIC -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"} ;;
+ UNIX_SV\ 4.2MP)
+ SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"} ;;
+ OpenUNIX\ 5)
+ SFLAGS=${CFLAGS-"-KPIC -O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -G"} ;;
+ AIX*) # Courtesy of dbakker@arrayasolutions.com
+ SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+ CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+ LDSHARED=${LDSHARED-"xlc -G"} ;;
+ # send working options for other systems to zlib@gzip.org
+ *) SFLAGS=${CFLAGS-"-O"}
+ CFLAGS=${CFLAGS-"-O"}
+ LDSHARED=${LDSHARED-"cc -shared"} ;;
+ esac
+fi
+
+# destination names for shared library if not defined above
+SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
+SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
+SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
+
+echo >> configure.log
+
+# define functions for testing compiler and library characteristics and logging the results
+
+cat > $test.c <<EOF
+#error error
+EOF
+if ($CC -c $CFLAGS $test.c) 2>/dev/null; then
+ try()
+ {
+ show $*
+ test "`( $* ) 2>&1 | tee -a configure.log`" = ""
+ }
+ echo - using any output from compiler to indicate an error >> configure.log
+else
+try()
+{
+ show $*
+ ( $* ) >> configure.log 2>&1
+ ret=$?
+ if test $ret -ne 0; then
+ echo "(exit code "$ret")" >> configure.log
+ fi
+ return $ret
+}
+fi
+
+tryboth()
+{
+ show $*
+ got=`( $* ) 2>&1`
+ ret=$?
+ printf %s "$got" >> configure.log
+ if test $ret -ne 0; then
+ return $ret
+ fi
+ test "$got" = ""
+}
+
+cat > $test.c << EOF
+int foo() { return 0; }
+EOF
+echo "Checking for obsessive-compulsive compiler options..." >> configure.log
+if try $CC -c $CFLAGS $test.c; then
+ :
+else
+ echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log
+ leave 1
+fi
+
+echo >> configure.log
+
+# see if shared library build supported
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+if test $shared -eq 1; then
+ echo Checking for shared library support... | tee -a configure.log
+ # we must test in two steps (cc then ld), required at least on SunOS 4.x
+ if try $CC -w -c $SFLAGS $test.c &&
+ try $LDSHARED $SFLAGS -o $test$shared_ext $test.o; then
+ echo Building shared library $SHAREDLIBV with $CC. | tee -a configure.log
+ elif test -z "$old_cc" -a -z "$old_cflags"; then
+ echo No shared library support. | tee -a configure.log
+ shared=0;
+ else
+ echo 'No shared library support; try without defining CC and CFLAGS' | tee -a configure.log
+ shared=0;
+ fi
+fi
+if test $shared -eq 0; then
+ LDSHARED="$CC"
+ ALL="static"
+ TEST="all teststatic"
+ SHAREDLIB=""
+ SHAREDLIBV=""
+ SHAREDLIBM=""
+ echo Building static library $STATICLIB version $VER with $CC. | tee -a configure.log
+else
+ ALL="static shared"
+ TEST="all teststatic testshared"
+fi
+
+# check for underscores in external names for use by assembler code
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+ *ASMV*)
+ echo >> configure.log
+ show "$NM $test.o | grep _hello"
+ if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then
+ CPP="$CPP -DNO_UNDERLINE"
+ echo Checking for underline in external names... No. | tee -a configure.log
+ else
+ echo Checking for underline in external names... Yes. | tee -a configure.log
+ fi ;;
+esac
+
+echo >> configure.log
+
+# check for large file support, and if none, check for fseeko()
+cat > $test.c <<EOF
+#include <sys/types.h>
+off64_t dummy = 0;
+EOF
+if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then
+ CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
+ SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
+ ALL="${ALL} all64"
+ TEST="${TEST} test64"
+ echo "Checking for off64_t... Yes." | tee -a configure.log
+ echo "Checking for fseeko... Yes." | tee -a configure.log
+else
+ echo "Checking for off64_t... No." | tee -a configure.log
+ echo >> configure.log
+ cat > $test.c <<EOF
+#include <stdio.h>
+int main(void) {
+ fseeko(NULL, 0, 0);
+ return 0;
+}
+EOF
+ if try $CC $CFLAGS -o $test $test.c; then
+ echo "Checking for fseeko... Yes." | tee -a configure.log
+ else
+ CFLAGS="${CFLAGS} -DNO_FSEEKO"
+ SFLAGS="${SFLAGS} -DNO_FSEEKO"
+ echo "Checking for fseeko... No." | tee -a configure.log
+ fi
+fi
+
+echo >> configure.log
+
+# check for strerror() for use by gz* functions
+cat > $test.c <<EOF
+#include <string.h>
+#include <errno.h>
+int main() { return strlen(strerror(errno)); }
+EOF
+if try $CC $CFLAGS -o $test $test.c; then
+ echo "Checking for strerror... Yes." | tee -a configure.log
+else
+ CFLAGS="${CFLAGS} -DNO_STRERROR"
+ SFLAGS="${SFLAGS} -DNO_STRERROR"
+ echo "Checking for strerror... No." | tee -a configure.log
+fi
+
+# copy clean zconf.h for subsequent edits
+cp -p zconf.h.in zconf.h
+
+echo >> configure.log
+
+# check for unistd.h and save result in zconf.h
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if try $CC -c $CFLAGS $test.c; then
+ sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+ mv zconf.temp.h zconf.h
+ echo "Checking for unistd.h... Yes." | tee -a configure.log
+else
+ echo "Checking for unistd.h... No." | tee -a configure.log
+fi
+
+echo >> configure.log
+
+# check for stdarg.h and save result in zconf.h
+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if try $CC -c $CFLAGS $test.c; then
+ sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+ mv zconf.temp.h zconf.h
+ echo "Checking for stdarg.h... Yes." | tee -a configure.log
+else
+ echo "Checking for stdarg.h... No." | tee -a configure.log
+fi
+
+# if the z_ prefix was requested, save that in zconf.h
+if test $zprefix -eq 1; then
+ sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
+ mv zconf.temp.h zconf.h
+ echo >> configure.log
+ echo "Using z_ prefix on all symbols." | tee -a configure.log
+fi
+
+# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists
+if test $solo -eq 1; then
+ sed '/#define ZCONF_H/a\
+#define Z_SOLO
+
+' < zconf.h > zconf.temp.h
+ mv zconf.temp.h zconf.h
+OBJC='$(OBJZ)'
+PIC_OBJC='$(PIC_OBJZ)'
+fi
+
+# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X
+if test $cover -eq 1; then
+ CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
+ if test -n "$GCC_CLASSIC"; then
+ CC=$GCC_CLASSIC
+ fi
+fi
+
+echo >> configure.log
+
+# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions
+# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a
+# return value. The most secure result is vsnprintf() with a return value. snprintf() with a
+# return value is secure as well, but then gzprintf() will be limited to 20 arguments.
+cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+#include "zconf.h"
+int main()
+{
+#ifndef STDC
+ choke me
+#endif
+ return 0;
+}
+EOF
+if try $CC -c $CFLAGS $test.c; then
+ echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log
+
+ echo >> configure.log
+ cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+ char buf[20];
+ va_list ap;
+ va_start(ap, fmt);
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ va_end(ap);
+ return 0;
+}
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+ if try $CC $CFLAGS -o $test $test.c; then
+ echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log
+
+ echo >> configure.log
+ cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+ int n;
+ char buf[20];
+ va_list ap;
+ va_start(ap, fmt);
+ n = vsnprintf(buf, sizeof(buf), fmt, ap);
+ va_end(ap);
+ return n;
+}
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+
+ if try $CC -c $CFLAGS $test.c; then
+ echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log
+ else
+ CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+ SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
+ echo "Checking for return value of vsnprintf()... No." | tee -a configure.log
+ echo " WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log
+ echo " can build but will be open to possible string-format security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+ fi
+ else
+ CFLAGS="$CFLAGS -DNO_vsnprintf"
+ SFLAGS="$SFLAGS -DNO_vsnprintf"
+ echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log
+ echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log
+ echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+
+ echo >> configure.log
+ cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+ int n;
+ char buf[20];
+ va_list ap;
+ va_start(ap, fmt);
+ n = vsprintf(buf, fmt, ap);
+ va_end(ap);
+ return n;
+}
+int main()
+{
+ return (mytest("Hello%d\n", 1));
+}
+EOF
+
+ if try $CC -c $CFLAGS $test.c; then
+ echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log
+ else
+ CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+ SFLAGS="$SFLAGS -DHAS_vsprintf_void"
+ echo "Checking for return value of vsprintf()... No." | tee -a configure.log
+ echo " WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log
+ echo " can build but will be open to possible string-format security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+ fi
+ fi
+else
+ echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log
+
+ echo >> configure.log
+ cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+ char buf[20];
+ snprintf(buf, sizeof(buf), "%s", "foo");
+ return 0;
+}
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if try $CC $CFLAGS -o $test $test.c; then
+ echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log
+
+ echo >> configure.log
+ cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+ char buf[20];
+ return snprintf(buf, sizeof(buf), "%s", "foo");
+}
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if try $CC -c $CFLAGS $test.c; then
+ echo "Checking for return value of snprintf()... Yes." | tee -a configure.log
+ else
+ CFLAGS="$CFLAGS -DHAS_snprintf_void"
+ SFLAGS="$SFLAGS -DHAS_snprintf_void"
+ echo "Checking for return value of snprintf()... No." | tee -a configure.log
+ echo " WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log
+ echo " can build but will be open to possible string-format security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+ fi
+ else
+ CFLAGS="$CFLAGS -DNO_snprintf"
+ SFLAGS="$SFLAGS -DNO_snprintf"
+ echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log
+ echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log
+ echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+
+ echo >> configure.log
+ cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+ char buf[20];
+ return sprintf(buf, "%s", "foo");
+}
+int main()
+{
+ return (mytest());
+}
+EOF
+
+ if try $CC -c $CFLAGS $test.c; then
+ echo "Checking for return value of sprintf()... Yes." | tee -a configure.log
+ else
+ CFLAGS="$CFLAGS -DHAS_sprintf_void"
+ SFLAGS="$SFLAGS -DHAS_sprintf_void"
+ echo "Checking for return value of sprintf()... No." | tee -a configure.log
+ echo " WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log
+ echo " can build but will be open to possible string-format security" | tee -a configure.log
+ echo " vulnerabilities." | tee -a configure.log
+ fi
+ fi
+fi
+
+# see if we can hide zlib internal symbols that are linked between separate source files
+if test "$gcc" -eq 1; then
+ echo >> configure.log
+ cat > $test.c <<EOF
+#define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+int ZLIB_INTERNAL foo;
+int main()
+{
+ return 0;
+}
+EOF
+ if tryboth $CC -c $CFLAGS $test.c; then
+ CFLAGS="$CFLAGS -DHAVE_HIDDEN"
+ SFLAGS="$SFLAGS -DHAVE_HIDDEN"
+ echo "Checking for attribute(visibility) support... Yes." | tee -a configure.log
+ else
+ echo "Checking for attribute(visibility) support... No." | tee -a configure.log
+ fi
+fi
+
+# show the results in the log
+echo >> configure.log
+echo ALL = $ALL >> configure.log
+echo AR = $AR >> configure.log
+echo ARFLAGS = $ARFLAGS >> configure.log
+echo CC = $CC >> configure.log
+echo CFLAGS = $CFLAGS >> configure.log
+echo CPP = $CPP >> configure.log
+echo EXE = $EXE >> configure.log
+echo LDCONFIG = $LDCONFIG >> configure.log
+echo LDFLAGS = $LDFLAGS >> configure.log
+echo LDSHARED = $LDSHARED >> configure.log
+echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log
+echo OBJC = $OBJC >> configure.log
+echo PIC_OBJC = $PIC_OBJC >> configure.log
+echo RANLIB = $RANLIB >> configure.log
+echo SFLAGS = $SFLAGS >> configure.log
+echo SHAREDLIB = $SHAREDLIB >> configure.log
+echo SHAREDLIBM = $SHAREDLIBM >> configure.log
+echo SHAREDLIBV = $SHAREDLIBV >> configure.log
+echo STATICLIB = $STATICLIB >> configure.log
+echo TEST = $TEST >> configure.log
+echo VER = $VER >> configure.log
+echo Z_U4 = $Z_U4 >> configure.log
+echo exec_prefix = $exec_prefix >> configure.log
+echo includedir = $includedir >> configure.log
+echo libdir = $libdir >> configure.log
+echo mandir = $mandir >> configure.log
+echo prefix = $prefix >> configure.log
+echo sharedlibdir = $sharedlibdir >> configure.log
+echo uname = $uname >> configure.log
+
+# udpate Makefile with the configure results
+sed < Makefile.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^SFLAGS *=/s#=.*#=$SFLAGS#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^CPP *=/s#=.*#=$CPP#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^OBJC *=/s#=.*#= $OBJC#
+/^PIC_OBJC *=/s#=.*#= $PIC_OBJC#
+/^all: */s#:.*#: $ALL#
+/^test: */s#:.*#: $TEST#
+" > Makefile
+
+# create zlib.pc with the configure results
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc
+
+# done
+leave 0
--- /dev/null
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+ada/ by Dmitriy Anisimkov <anisimkov@yahoo.com>
+ Support for Ada
+ See http://zlib-ada.sourceforge.net/
+
+amd64/ by Mikhail Teterin <mi@ALDAN.algebra.com>
+ asm code for AMD64
+ See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
+
+asm686/ by Brian Raiter <breadbox@muppetlabs.com>
+ asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+blast/ by Mark Adler <madler@alumni.caltech.edu>
+ Decompressor for output of PKWare Data Compression Library (DCL)
+
+delphi/ by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+ Support for Delphi and C++ Builder
+
+dotzlib/ by Henrik Ravn <henrik@ravn.com>
+ Support for Microsoft .Net and Visual C++ .Net
+
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+ GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+ assembler to replace longest_match() and inflate_fast()
+
+infback9/ by Mark Adler <madler@alumni.caltech.edu>
+ Unsupported diffs to infback to decode the deflate64 format
+
+inflate86/ by Chris Anderson <christop@charm.net>
+ Tuned x86 gcc asm code to replace inflate_fast()
+
+iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
+ Another C++ I/O streams interface
+
+iostream3/ by Ludwig Schwardt <schwardt@sun.ac.za>
+ and Kevin Ruland <kevin@rodin.wustl.edu>
+ Yet another C++ I/O streams interface
+
+masmx64/ by Gilles Vollant <info@winimage.com>
+ x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+ replace longest_match() and inflate_fast(), also masm x86
+ 64-bits translation of Chris Anderson inflate_fast()
+
+masmx86/ by Gilles Vollant <info@winimage.com>
+ x86 asm code to replace longest_match() and inflate_fast(),
+ for Visual C++ and MASM (32 bits).
+ Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
+
+minizip/ by Gilles Vollant <info@winimage.com>
+ Mini zip and unzip based on zlib
+ Includes Zip64 support by Mathias Svensson <mathias@result42.com>
+ See http://www.winimage.com/zLibDll/unzip.html
+
+pascal/ by Bob Dellaca <bobdl@xtra.co.nz> et al.
+ Support for Pascal
+
+puff/ by Mark Adler <madler@alumni.caltech.edu>
+ Small, low memory usage inflate. Also serves to provide an
+ unambiguous description of the deflate format.
+
+testzlib/ by Gilles Vollant <info@winimage.com>
+ Example of the use of zlib
+
+untgz/ by Pedro A. Aranda Gutierrez <paag@tid.es>
+ A very simple tar.gz file extractor using zlib
+
+vstudio/ by Gilles Vollant <info@winimage.com>
+ Building a minizip-enhanced zlib with Microsoft Visual Studio
+ Includes vc11 from kreuzerkrieg and vc12 from davispuh
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2004 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+--
+-- $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+-- This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+-- Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+-- of exactly the correct size is used for decompressed data, and the last
+-- few bytes passed in to Zlib are checksum bytes.
+
+-- This program compresses a string of text, and then decompresses the
+-- compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+ EOL : Character renames ASCII.LF;
+ Text : constant String
+ := "Four score and seven years ago our fathers brought forth," & EOL &
+ "upon this continent, a new nation, conceived in liberty," & EOL &
+ "and dedicated to the proposition that `all men are created equal'.";
+
+ Source : Stream_Element_Array (1 .. Text'Length);
+ for Source'Address use Text'Address;
+
+begin
+ Ada.Text_IO.Put (Text);
+ Ada.Text_IO.New_Line;
+ Ada.Text_IO.Put_Line
+ ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+ declare
+ Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+ L : Stream_Element_Offset;
+ begin
+ Compress : declare
+ Compressor : Filter_Type;
+ I : Stream_Element_Offset;
+ begin
+ Deflate_Init (Compressor);
+
+ -- Compress the whole of T at once.
+
+ Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+ pragma Assert (I = Source'Last);
+
+ Close (Compressor);
+
+ Ada.Text_IO.Put_Line
+ ("Compressed size : "
+ & Stream_Element_Offset'Image (L) & " bytes");
+ end Compress;
+
+ -- Now we decompress the data, passing short blocks of data to Zlib
+ -- (because this demonstrates the problem - the last block passed will
+ -- contain checksum information and there will be no output, only a
+ -- check inside Zlib that the checksum is correct).
+
+ Decompress : declare
+ Decompressor : Filter_Type;
+
+ Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+ Block_Size : constant := 4;
+ -- This makes sure that the last block contains
+ -- only Adler checksum data.
+
+ P : Stream_Element_Offset := Compressed_Data'First - 1;
+ O : Stream_Element_Offset;
+ begin
+ Inflate_Init (Decompressor);
+
+ loop
+ Translate
+ (Decompressor,
+ Compressed_Data
+ (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+ P,
+ Uncompressed_Data
+ (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+ O,
+ No_Flush);
+
+ Ada.Text_IO.Put_Line
+ ("Total in : " & Count'Image (Total_In (Decompressor)) &
+ ", out : " & Count'Image (Total_Out (Decompressor)));
+
+ exit when P = L;
+ end loop;
+
+ Ada.Text_IO.New_Line;
+ Ada.Text_IO.Put_Line
+ ("Decompressed text matches original text : "
+ & Boolean'Image (Uncompressed_Data = Source));
+ end Decompress;
+ end;
+end Buffer_Demo;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+-- Continuous test for ZLib multithreading. If the test would fail
+-- we should provide thread safe allocation routines for the Z_Stream.
+--
+-- $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+ use Ada.Streams;
+ use ZLib;
+
+ Stop : Boolean := False;
+
+ pragma Atomic (Stop);
+
+ subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is
+ new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ task type Test_Task;
+
+ task body Test_Task is
+ Buffer : Stream_Element_Array (1 .. 100_000);
+ Gen : Random_Elements.Generator;
+
+ Buffer_First : Stream_Element_Offset;
+ Compare_First : Stream_Element_Offset;
+
+ Deflate : Filter_Type;
+ Inflate : Filter_Type;
+
+ procedure Further (Item : in Stream_Element_Array);
+
+ procedure Read_Buffer
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset);
+
+ -------------
+ -- Further --
+ -------------
+
+ procedure Further (Item : in Stream_Element_Array) is
+
+ procedure Compare (Item : in Stream_Element_Array);
+
+ -------------
+ -- Compare --
+ -------------
+
+ procedure Compare (Item : in Stream_Element_Array) is
+ Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+ begin
+ if Buffer (Compare_First .. Next_First - 1) /= Item then
+ raise Program_Error;
+ end if;
+
+ Compare_First := Next_First;
+ end Compare;
+
+ procedure Compare_Write is new ZLib.Write (Write => Compare);
+ begin
+ Compare_Write (Inflate, Item, No_Flush);
+ end Further;
+
+ -----------------
+ -- Read_Buffer --
+ -----------------
+
+ procedure Read_Buffer
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset)
+ is
+ Buff_Diff : Stream_Element_Offset := Buffer'Last - Buffer_First;
+ Next_First : Stream_Element_Offset;
+ begin
+ if Item'Length <= Buff_Diff then
+ Last := Item'Last;
+
+ Next_First := Buffer_First + Item'Length;
+
+ Item := Buffer (Buffer_First .. Next_First - 1);
+
+ Buffer_First := Next_First;
+ else
+ Last := Item'First + Buff_Diff;
+ Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+ Buffer_First := Buffer'Last + 1;
+ end if;
+ end Read_Buffer;
+
+ procedure Translate is new Generic_Translate
+ (Data_In => Read_Buffer,
+ Data_Out => Further);
+
+ begin
+ Random_Elements.Reset (Gen);
+
+ Buffer := (others => 20);
+
+ Main : loop
+ for J in Buffer'Range loop
+ Buffer (J) := Random_Elements.Random (Gen);
+
+ Deflate_Init (Deflate);
+ Inflate_Init (Inflate);
+
+ Buffer_First := Buffer'First;
+ Compare_First := Buffer'First;
+
+ Translate (Deflate);
+
+ if Compare_First /= Buffer'Last + 1 then
+ raise Program_Error;
+ end if;
+
+ Ada.Text_IO.Put_Line
+ (Ada.Task_Identification.Image
+ (Ada.Task_Identification.Current_Task)
+ & Stream_Element_Offset'Image (J)
+ & ZLib.Count'Image (Total_Out (Deflate)));
+
+ Close (Deflate);
+ Close (Inflate);
+
+ exit Main when Stop;
+ end loop;
+ end loop Main;
+ exception
+ when E : others =>
+ Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+ Stop := True;
+ end Test_Task;
+
+ Test : array (1 .. 4) of Test_Task;
+
+ pragma Unreferenced (Test);
+
+ Dummy : Character;
+
+begin
+ Ada.Text_IO.Get_Immediate (Dummy);
+ Stop := True;
+end MTest;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
+
+-- Test/demo program for the generic read interface.
+
+with Ada.Numerics.Discrete_Random;
+with Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib;
+
+procedure Read is
+
+ use Ada.Streams;
+
+ ------------------------------------
+ -- Test configuration parameters --
+ ------------------------------------
+
+ File_Size : Stream_Element_Offset := 100_000;
+
+ Continuous : constant Boolean := False;
+ -- If this constant is True, the test would be repeated again and again,
+ -- with increment File_Size for every iteration.
+
+ Header : constant ZLib.Header_Type := ZLib.Default;
+ -- Do not use Header other than Default in ZLib versions 1.1.4 and older.
+
+ Init_Random : constant := 8;
+ -- We are using the same random sequence, in case of we catch bug,
+ -- so we would be able to reproduce it.
+
+ -- End --
+
+ Pack_Size : Stream_Element_Offset;
+ Offset : Stream_Element_Offset;
+
+ Filter : ZLib.Filter_Type;
+
+ subtype Visible_Symbols
+ is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is new
+ Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ Gen : Random_Elements.Generator;
+ Period : constant Stream_Element_Offset := 200;
+ -- Period constant variable for random generator not to be very random.
+ -- Bigger period, harder random.
+
+ Read_Buffer : Stream_Element_Array (1 .. 2048);
+ Read_First : Stream_Element_Offset;
+ Read_Last : Stream_Element_Offset;
+
+ procedure Reset;
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Read
+ -- reading data from the File_In.
+
+ procedure Read is new ZLib.Read
+ (Read,
+ Read_Buffer,
+ Rest_First => Read_First,
+ Rest_Last => Read_Last);
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Last := Stream_Element_Offset'Min
+ (Item'Last,
+ Item'First + File_Size - Offset);
+
+ for J in Item'First .. Last loop
+ if J < Item'First + Period then
+ Item (J) := Random_Elements.Random (Gen);
+ else
+ Item (J) := Item (J - Period);
+ end if;
+
+ Offset := Offset + 1;
+ end loop;
+ end Read;
+
+ -----------
+ -- Reset --
+ -----------
+
+ procedure Reset is
+ begin
+ Random_Elements.Reset (Gen, Init_Random);
+ Pack_Size := 0;
+ Offset := 1;
+ Read_First := Read_Buffer'Last + 1;
+ Read_Last := Read_Buffer'Last;
+ end Reset;
+
+begin
+ Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+ loop
+ for Level in ZLib.Compression_Level'Range loop
+
+ Ada.Text_IO.Put ("Level ="
+ & ZLib.Compression_Level'Image (Level));
+
+ -- Deflate using generic instantiation.
+
+ ZLib.Deflate_Init
+ (Filter,
+ Level,
+ Header => Header);
+
+ Reset;
+
+ Ada.Text_IO.Put
+ (Stream_Element_Offset'Image (File_Size) & " ->");
+
+ loop
+ declare
+ Buffer : Stream_Element_Array (1 .. 1024);
+ Last : Stream_Element_Offset;
+ begin
+ Read (Filter, Buffer, Last);
+
+ Pack_Size := Pack_Size + Last - Buffer'First + 1;
+
+ exit when Last < Buffer'Last;
+ end;
+ end loop;
+
+ Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size));
+
+ ZLib.Close (Filter);
+ end loop;
+
+ exit when not Continuous;
+
+ File_Size := File_Size + 1;
+ end loop;
+end Read;
--- /dev/null
+ ZLib for Ada thick binding (ZLib.Ada)
+ Release 1.3
+
+ZLib.Ada is a thick binding interface to the popular ZLib data
+compression library, available at http://www.gzip.org/zlib/.
+It provides Ada-style access to the ZLib C library.
+
+
+ Here are the main changes since ZLib.Ada 1.2:
+
+- Attension: ZLib.Read generic routine have a initialization requirement
+ for Read_Last parameter now. It is a bit incompartible with previous version,
+ but extends functionality, we could use new parameters Allow_Read_Some and
+ Flush now.
+
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
+
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+ Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+ computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
+
+
+ How to build ZLib.Ada under GNAT
+
+You should have the ZLib library already build on your computer, before
+building ZLib.Ada. Make the directory of ZLib.Ada sources current and
+issue the command:
+
+ gnatmake test -largs -L<directory where libz.a is> -lz
+
+Or use the GNAT project file build for GNAT 3.15 or later:
+
+ gnatmake -Pzlib.gpr -L<directory where libz.a is>
+
+
+ How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+
+1. Make a project with all *.ads and *.adb files from the distribution.
+2. Build the libz.a library from the ZLib C sources.
+3. Rename libz.a to z.lib.
+4. Add the library z.lib to the project.
+5. Add the libc.lib library from the ObjectAda distribution to the project.
+6. Build the executable using test.adb as a main procedure.
+
+
+ How to use ZLib.Ada
+
+The source files test.adb and read.adb are small demo programs that show
+the main functionality of ZLib.Ada.
+
+The routines from the package specifications are commented.
+
+
+Homepage: http://zlib-ada.sourceforge.net/
+Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $
+
+-- The program has a few aims.
+-- 1. Test ZLib.Ada95 thick binding functionality.
+-- 2. Show the example of use main functionality of the ZLib.Ada95 binding.
+-- 3. Build this program automatically compile all ZLib.Ada95 packages under
+-- GNAT Ada95 compiler.
+
+with ZLib.Streams;
+with Ada.Streams.Stream_IO;
+with Ada.Numerics.Discrete_Random;
+
+with Ada.Text_IO;
+
+with Ada.Calendar;
+
+procedure Test is
+
+ use Ada.Streams;
+ use Stream_IO;
+
+ ------------------------------------
+ -- Test configuration parameters --
+ ------------------------------------
+
+ File_Size : Count := 100_000;
+ Continuous : constant Boolean := False;
+
+ Header : constant ZLib.Header_Type := ZLib.Default;
+ -- ZLib.None;
+ -- ZLib.Auto;
+ -- ZLib.GZip;
+ -- Do not use Header other then Default in ZLib versions 1.1.4
+ -- and older.
+
+ Strategy : constant ZLib.Strategy_Type := ZLib.Default_Strategy;
+ Init_Random : constant := 10;
+
+ -- End --
+
+ In_File_Name : constant String := "testzlib.in";
+ -- Name of the input file
+
+ Z_File_Name : constant String := "testzlib.zlb";
+ -- Name of the compressed file.
+
+ Out_File_Name : constant String := "testzlib.out";
+ -- Name of the decompressed file.
+
+ File_In : File_Type;
+ File_Out : File_Type;
+ File_Back : File_Type;
+ File_Z : ZLib.Streams.Stream_Type;
+
+ Filter : ZLib.Filter_Type;
+
+ Time_Stamp : Ada.Calendar.Time;
+
+ procedure Generate_File;
+ -- Generate file of spetsified size with some random data.
+ -- The random data is repeatable, for the good compression.
+
+ procedure Compare_Streams
+ (Left, Right : in out Root_Stream_Type'Class);
+ -- The procedure compearing data in 2 streams.
+ -- It is for compare data before and after compression/decompression.
+
+ procedure Compare_Files (Left, Right : String);
+ -- Compare files. Based on the Compare_Streams.
+
+ procedure Copy_Streams
+ (Source, Target : in out Root_Stream_Type'Class;
+ Buffer_Size : in Stream_Element_Offset := 1024);
+ -- Copying data from one stream to another. It is for test stream
+ -- interface of the library.
+
+ procedure Data_In
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Generic_Translate.
+ -- reading data from the File_In.
+
+ procedure Data_Out (Item : in Stream_Element_Array);
+ -- this procedure is for generic instantiation of
+ -- ZLib.Generic_Translate.
+ -- writing data to the File_Out.
+
+ procedure Stamp;
+ -- Store the timestamp to the local variable.
+
+ procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count);
+ -- Print the time statistic with the message.
+
+ procedure Translate is new ZLib.Generic_Translate
+ (Data_In => Data_In,
+ Data_Out => Data_Out);
+ -- This procedure is moving data from File_In to File_Out
+ -- with compression or decompression, depend on initialization of
+ -- Filter parameter.
+
+ -------------------
+ -- Compare_Files --
+ -------------------
+
+ procedure Compare_Files (Left, Right : String) is
+ Left_File, Right_File : File_Type;
+ begin
+ Open (Left_File, In_File, Left);
+ Open (Right_File, In_File, Right);
+ Compare_Streams (Stream (Left_File).all, Stream (Right_File).all);
+ Close (Left_File);
+ Close (Right_File);
+ end Compare_Files;
+
+ ---------------------
+ -- Compare_Streams --
+ ---------------------
+
+ procedure Compare_Streams
+ (Left, Right : in out Ada.Streams.Root_Stream_Type'Class)
+ is
+ Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#);
+ Left_Last, Right_Last : Stream_Element_Offset;
+ begin
+ loop
+ Read (Left, Left_Buffer, Left_Last);
+ Read (Right, Right_Buffer, Right_Last);
+
+ if Left_Last /= Right_Last then
+ Ada.Text_IO.Put_Line ("Compare error :"
+ & Stream_Element_Offset'Image (Left_Last)
+ & " /= "
+ & Stream_Element_Offset'Image (Right_Last));
+
+ raise Constraint_Error;
+
+ elsif Left_Buffer (0 .. Left_Last)
+ /= Right_Buffer (0 .. Right_Last)
+ then
+ Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal.");
+ raise Constraint_Error;
+
+ end if;
+
+ exit when Left_Last < Left_Buffer'Last;
+ end loop;
+ end Compare_Streams;
+
+ ------------------
+ -- Copy_Streams --
+ ------------------
+
+ procedure Copy_Streams
+ (Source, Target : in out Ada.Streams.Root_Stream_Type'Class;
+ Buffer_Size : in Stream_Element_Offset := 1024)
+ is
+ Buffer : Stream_Element_Array (1 .. Buffer_Size);
+ Last : Stream_Element_Offset;
+ begin
+ loop
+ Read (Source, Buffer, Last);
+ Write (Target, Buffer (1 .. Last));
+
+ exit when Last < Buffer'Last;
+ end loop;
+ end Copy_Streams;
+
+ -------------
+ -- Data_In --
+ -------------
+
+ procedure Data_In
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Read (File_In, Item, Last);
+ end Data_In;
+
+ --------------
+ -- Data_Out --
+ --------------
+
+ procedure Data_Out (Item : in Stream_Element_Array) is
+ begin
+ Write (File_Out, Item);
+ end Data_Out;
+
+ -------------------
+ -- Generate_File --
+ -------------------
+
+ procedure Generate_File is
+ subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+ package Random_Elements is
+ new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+ Gen : Random_Elements.Generator;
+ Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10;
+
+ Buffer_Count : constant Count := File_Size / Buffer'Length;
+ -- Number of same buffers in the packet.
+
+ Density : constant Count := 30; -- from 0 to Buffer'Length - 2;
+
+ procedure Fill_Buffer (J, D : in Count);
+ -- Change the part of the buffer.
+
+ -----------------
+ -- Fill_Buffer --
+ -----------------
+
+ procedure Fill_Buffer (J, D : in Count) is
+ begin
+ for K in 0 .. D loop
+ Buffer
+ (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1))
+ := Random_Elements.Random (Gen);
+
+ end loop;
+ end Fill_Buffer;
+
+ begin
+ Random_Elements.Reset (Gen, Init_Random);
+
+ Create (File_In, Out_File, In_File_Name);
+
+ Fill_Buffer (1, Buffer'Length - 2);
+
+ for J in 1 .. Buffer_Count loop
+ Write (File_In, Buffer);
+
+ Fill_Buffer (J, Density);
+ end loop;
+
+ -- fill remain size.
+
+ Write
+ (File_In,
+ Buffer
+ (1 .. Stream_Element_Offset
+ (File_Size - Buffer'Length * Buffer_Count)));
+
+ Flush (File_In);
+ Close (File_In);
+ end Generate_File;
+
+ ---------------------
+ -- Print_Statistic --
+ ---------------------
+
+ procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is
+ use Ada.Calendar;
+ use Ada.Text_IO;
+
+ package Count_IO is new Integer_IO (ZLib.Count);
+
+ Curr_Dur : Duration := Clock - Time_Stamp;
+ begin
+ Put (Msg);
+
+ Set_Col (20);
+ Ada.Text_IO.Put ("size =");
+
+ Count_IO.Put
+ (Data_Size,
+ Width => Stream_IO.Count'Image (File_Size)'Length);
+
+ Put_Line (" duration =" & Duration'Image (Curr_Dur));
+ end Print_Statistic;
+
+ -----------
+ -- Stamp --
+ -----------
+
+ procedure Stamp is
+ begin
+ Time_Stamp := Ada.Calendar.Clock;
+ end Stamp;
+
+begin
+ Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+ loop
+ Generate_File;
+
+ for Level in ZLib.Compression_Level'Range loop
+
+ Ada.Text_IO.Put_Line ("Level ="
+ & ZLib.Compression_Level'Image (Level));
+
+ -- Test generic interface.
+ Open (File_In, In_File, In_File_Name);
+ Create (File_Out, Out_File, Z_File_Name);
+
+ Stamp;
+
+ -- Deflate using generic instantiation.
+
+ ZLib.Deflate_Init
+ (Filter => Filter,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Translate (Filter);
+ Print_Statistic ("Generic compress", ZLib.Total_Out (Filter));
+ ZLib.Close (Filter);
+
+ Close (File_In);
+ Close (File_Out);
+
+ Open (File_In, In_File, Z_File_Name);
+ Create (File_Out, Out_File, Out_File_Name);
+
+ Stamp;
+
+ -- Inflate using generic instantiation.
+
+ ZLib.Inflate_Init (Filter, Header => Header);
+
+ Translate (Filter);
+ Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter));
+
+ ZLib.Close (Filter);
+
+ Close (File_In);
+ Close (File_Out);
+
+ Compare_Files (In_File_Name, Out_File_Name);
+
+ -- Test stream interface.
+
+ -- Compress to the back stream.
+
+ Open (File_In, In_File, In_File_Name);
+ Create (File_Back, Out_File, Z_File_Name);
+
+ Stamp;
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.Out_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => True,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Copy_Streams
+ (Source => Stream (File_In).all,
+ Target => File_Z);
+
+ -- Flushing internal buffers to the back stream.
+
+ ZLib.Streams.Flush (File_Z, ZLib.Finish);
+
+ Print_Statistic ("Write compress",
+ ZLib.Streams.Write_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+
+ Close (File_In);
+ Close (File_Back);
+
+ -- Compare reading from original file and from
+ -- decompression stream.
+
+ Open (File_In, In_File, In_File_Name);
+ Open (File_Back, In_File, Z_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.In_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => True,
+ Header => Header);
+
+ Stamp;
+ Compare_Streams (Stream (File_In).all, File_Z);
+
+ Print_Statistic ("Read decompress",
+ ZLib.Streams.Read_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+ Close (File_In);
+ Close (File_Back);
+
+ -- Compress by reading from compression stream.
+
+ Open (File_Back, In_File, In_File_Name);
+ Create (File_Out, Out_File, Z_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.In_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => False,
+ Level => Level,
+ Strategy => Strategy,
+ Header => Header);
+
+ Stamp;
+ Copy_Streams
+ (Source => File_Z,
+ Target => Stream (File_Out).all);
+
+ Print_Statistic ("Read compress",
+ ZLib.Streams.Read_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+
+ Close (File_Out);
+ Close (File_Back);
+
+ -- Decompress to decompression stream.
+
+ Open (File_In, In_File, Z_File_Name);
+ Create (File_Back, Out_File, Out_File_Name);
+
+ ZLib.Streams.Create
+ (Stream => File_Z,
+ Mode => ZLib.Streams.Out_Stream,
+ Back => ZLib.Streams.Stream_Access
+ (Stream (File_Back)),
+ Back_Compressed => False,
+ Header => Header);
+
+ Stamp;
+
+ Copy_Streams
+ (Source => Stream (File_In).all,
+ Target => File_Z);
+
+ Print_Statistic ("Write decompress",
+ ZLib.Streams.Write_Total_Out (File_Z));
+
+ ZLib.Streams.Close (File_Z);
+ Close (File_In);
+ Close (File_Back);
+
+ Compare_Files (In_File_Name, Out_File_Name);
+ end loop;
+
+ Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok.");
+
+ exit when not Continuous;
+
+ File_Size := File_Size + 1;
+ end loop;
+end Test;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
+
+with Ada.Unchecked_Deallocation;
+
+package body ZLib.Streams is
+
+ -----------
+ -- Close --
+ -----------
+
+ procedure Close (Stream : in out Stream_Type) is
+ procedure Free is new Ada.Unchecked_Deallocation
+ (Stream_Element_Array, Buffer_Access);
+ begin
+ if Stream.Mode = Out_Stream or Stream.Mode = Duplex then
+ -- We should flush the data written by the writer.
+
+ Flush (Stream, Finish);
+
+ Close (Stream.Writer);
+ end if;
+
+ if Stream.Mode = In_Stream or Stream.Mode = Duplex then
+ Close (Stream.Reader);
+ Free (Stream.Buffer);
+ end if;
+ end Close;
+
+ ------------
+ -- Create --
+ ------------
+
+ procedure Create
+ (Stream : out Stream_Type;
+ Mode : in Stream_Mode;
+ Back : in Stream_Access;
+ Back_Compressed : in Boolean;
+ Level : in Compression_Level := Default_Compression;
+ Strategy : in Strategy_Type := Default_Strategy;
+ Header : in Header_Type := Default;
+ Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size;
+ Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size)
+ is
+
+ subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size);
+
+ procedure Init_Filter
+ (Filter : in out Filter_Type;
+ Compress : in Boolean);
+
+ -----------------
+ -- Init_Filter --
+ -----------------
+
+ procedure Init_Filter
+ (Filter : in out Filter_Type;
+ Compress : in Boolean) is
+ begin
+ if Compress then
+ Deflate_Init
+ (Filter, Level, Strategy, Header => Header);
+ else
+ Inflate_Init (Filter, Header => Header);
+ end if;
+ end Init_Filter;
+
+ begin
+ Stream.Back := Back;
+ Stream.Mode := Mode;
+
+ if Mode = Out_Stream or Mode = Duplex then
+ Init_Filter (Stream.Writer, Back_Compressed);
+ Stream.Buffer_Size := Write_Buffer_Size;
+ else
+ Stream.Buffer_Size := 0;
+ end if;
+
+ if Mode = In_Stream or Mode = Duplex then
+ Init_Filter (Stream.Reader, not Back_Compressed);
+
+ Stream.Buffer := new Buffer_Subtype;
+ Stream.Rest_First := Stream.Buffer'Last + 1;
+ Stream.Rest_Last := Stream.Buffer'Last;
+ end if;
+ end Create;
+
+ -----------
+ -- Flush --
+ -----------
+
+ procedure Flush
+ (Stream : in out Stream_Type;
+ Mode : in Flush_Mode := Sync_Flush)
+ is
+ Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size);
+ Last : Stream_Element_Offset;
+ begin
+ loop
+ Flush (Stream.Writer, Buffer, Last, Mode);
+
+ Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last));
+
+ exit when Last < Buffer'Last;
+ end loop;
+ end Flush;
+
+ -------------
+ -- Is_Open --
+ -------------
+
+ function Is_Open (Stream : Stream_Type) return Boolean is
+ begin
+ return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+ end Is_Open;
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Stream : in out Stream_Type;
+ Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset)
+ is
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset);
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Item : out Stream_Element_Array;
+ Last : out Stream_Element_Offset) is
+ begin
+ Ada.Streams.Read (Stream.Back.all, Item, Last);
+ end Read;
+
+ procedure Read is new ZLib.Read
+ (Read => Read,
+ Buffer => Stream.Buffer.all,
+ Rest_First => Stream.Rest_First,
+ Rest_Last => Stream.Rest_Last);
+
+ begin
+ Read (Stream.Reader, Item, Last);
+ end Read;
+
+ -------------------
+ -- Read_Total_In --
+ -------------------
+
+ function Read_Total_In (Stream : in Stream_Type) return Count is
+ begin
+ return Total_In (Stream.Reader);
+ end Read_Total_In;
+
+ --------------------
+ -- Read_Total_Out --
+ --------------------
+
+ function Read_Total_Out (Stream : in Stream_Type) return Count is
+ begin
+ return Total_Out (Stream.Reader);
+ end Read_Total_Out;
+
+ -----------
+ -- Write --
+ -----------
+
+ procedure Write
+ (Stream : in out Stream_Type;
+ Item : in Stream_Element_Array)
+ is
+
+ procedure Write (Item : in Stream_Element_Array);
+
+ -----------
+ -- Write --
+ -----------
+
+ procedure Write (Item : in Stream_Element_Array) is
+ begin
+ Ada.Streams.Write (Stream.Back.all, Item);
+ end Write;
+
+ procedure Write is new ZLib.Write
+ (Write => Write,
+ Buffer_Size => Stream.Buffer_Size);
+
+ begin
+ Write (Stream.Writer, Item, No_Flush);
+ end Write;
+
+ --------------------
+ -- Write_Total_In --
+ --------------------
+
+ function Write_Total_In (Stream : in Stream_Type) return Count is
+ begin
+ return Total_In (Stream.Writer);
+ end Write_Total_In;
+
+ ---------------------
+ -- Write_Total_Out --
+ ---------------------
+
+ function Write_Total_Out (Stream : in Stream_Type) return Count is
+ begin
+ return Total_Out (Stream.Writer);
+ end Write_Total_Out;
+
+end ZLib.Streams;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
+
+package ZLib.Streams is
+
+ type Stream_Mode is (In_Stream, Out_Stream, Duplex);
+
+ type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class;
+
+ type Stream_Type is
+ new Ada.Streams.Root_Stream_Type with private;
+
+ procedure Read
+ (Stream : in out Stream_Type;
+ Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset);
+
+ procedure Write
+ (Stream : in out Stream_Type;
+ Item : in Ada.Streams.Stream_Element_Array);
+
+ procedure Flush
+ (Stream : in out Stream_Type;
+ Mode : in Flush_Mode := Sync_Flush);
+ -- Flush the written data to the back stream,
+ -- all data placed to the compressor is flushing to the Back stream.
+ -- Should not be used untill necessary, becouse it is decreasing
+ -- compression.
+
+ function Read_Total_In (Stream : in Stream_Type) return Count;
+ pragma Inline (Read_Total_In);
+ -- Return total number of bytes read from back stream so far.
+
+ function Read_Total_Out (Stream : in Stream_Type) return Count;
+ pragma Inline (Read_Total_Out);
+ -- Return total number of bytes read so far.
+
+ function Write_Total_In (Stream : in Stream_Type) return Count;
+ pragma Inline (Write_Total_In);
+ -- Return total number of bytes written so far.
+
+ function Write_Total_Out (Stream : in Stream_Type) return Count;
+ pragma Inline (Write_Total_Out);
+ -- Return total number of bytes written to the back stream.
+
+ procedure Create
+ (Stream : out Stream_Type;
+ Mode : in Stream_Mode;
+ Back : in Stream_Access;
+ Back_Compressed : in Boolean;
+ Level : in Compression_Level := Default_Compression;
+ Strategy : in Strategy_Type := Default_Strategy;
+ Header : in Header_Type := Default;
+ Read_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size;
+ Write_Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size);
+ -- Create the Comression/Decompression stream.
+ -- If mode is In_Stream then Write operation is disabled.
+ -- If mode is Out_Stream then Read operation is disabled.
+
+ -- If Back_Compressed is true then
+ -- Data written to the Stream is compressing to the Back stream
+ -- and data read from the Stream is decompressed data from the Back stream.
+
+ -- If Back_Compressed is false then
+ -- Data written to the Stream is decompressing to the Back stream
+ -- and data read from the Stream is compressed data from the Back stream.
+
+ -- !!! When the Need_Header is False ZLib-Ada is using undocumented
+ -- ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
+
+ function Is_Open (Stream : Stream_Type) return Boolean;
+
+ procedure Close (Stream : in out Stream_Type);
+
+private
+
+ use Ada.Streams;
+
+ type Buffer_Access is access all Stream_Element_Array;
+
+ type Stream_Type
+ is new Root_Stream_Type with
+ record
+ Mode : Stream_Mode;
+
+ Buffer : Buffer_Access;
+ Rest_First : Stream_Element_Offset;
+ Rest_Last : Stream_Element_Offset;
+ -- Buffer for Read operation.
+ -- We need to have this buffer in the record
+ -- becouse not all read data from back stream
+ -- could be processed during the read operation.
+
+ Buffer_Size : Stream_Element_Offset;
+ -- Buffer size for write operation.
+ -- We do not need to have this buffer
+ -- in the record becouse all data could be
+ -- processed in the write operation.
+
+ Back : Stream_Access;
+ Reader : Filter_Type;
+ Writer : Filter_Type;
+ end record;
+
+end ZLib.Streams;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
+
+package body ZLib.Thin is
+
+ ZLIB_VERSION : constant Chars_Ptr := zlibVersion;
+
+ Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
+
+ --------------
+ -- Avail_In --
+ --------------
+
+ function Avail_In (Strm : in Z_Stream) return UInt is
+ begin
+ return Strm.Avail_In;
+ end Avail_In;
+
+ ---------------
+ -- Avail_Out --
+ ---------------
+
+ function Avail_Out (Strm : in Z_Stream) return UInt is
+ begin
+ return Strm.Avail_Out;
+ end Avail_Out;
+
+ ------------------
+ -- Deflate_Init --
+ ------------------
+
+ function Deflate_Init
+ (strm : Z_Streamp;
+ level : Int;
+ method : Int;
+ windowBits : Int;
+ memLevel : Int;
+ strategy : Int)
+ return Int is
+ begin
+ return deflateInit2
+ (strm,
+ level,
+ method,
+ windowBits,
+ memLevel,
+ strategy,
+ ZLIB_VERSION,
+ Z_Stream_Size);
+ end Deflate_Init;
+
+ ------------------
+ -- Inflate_Init --
+ ------------------
+
+ function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
+ begin
+ return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
+ end Inflate_Init;
+
+ ------------------------
+ -- Last_Error_Message --
+ ------------------------
+
+ function Last_Error_Message (Strm : in Z_Stream) return String is
+ use Interfaces.C.Strings;
+ begin
+ if Strm.msg = Null_Ptr then
+ return "";
+ else
+ return Value (Strm.msg);
+ end if;
+ end Last_Error_Message;
+
+ ------------
+ -- Set_In --
+ ------------
+
+ procedure Set_In
+ (Strm : in out Z_Stream;
+ Buffer : in Voidp;
+ Size : in UInt) is
+ begin
+ Strm.Next_In := Buffer;
+ Strm.Avail_In := Size;
+ end Set_In;
+
+ ------------------
+ -- Set_Mem_Func --
+ ------------------
+
+ procedure Set_Mem_Func
+ (Strm : in out Z_Stream;
+ Opaque : in Voidp;
+ Alloc : in alloc_func;
+ Free : in free_func) is
+ begin
+ Strm.opaque := Opaque;
+ Strm.zalloc := Alloc;
+ Strm.zfree := Free;
+ end Set_Mem_Func;
+
+ -------------
+ -- Set_Out --
+ -------------
+
+ procedure Set_Out
+ (Strm : in out Z_Stream;
+ Buffer : in Voidp;
+ Size : in UInt) is
+ begin
+ Strm.Next_Out := Buffer;
+ Strm.Avail_Out := Size;
+ end Set_Out;
+
+ --------------
+ -- Total_In --
+ --------------
+
+ function Total_In (Strm : in Z_Stream) return ULong is
+ begin
+ return Strm.Total_In;
+ end Total_In;
+
+ ---------------
+ -- Total_Out --
+ ---------------
+
+ function Total_Out (Strm : in Z_Stream) return ULong is
+ begin
+ return Strm.Total_Out;
+ end Total_Out;
+
+end ZLib.Thin;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2003 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
+
+with Interfaces.C.Strings;
+
+with System;
+
+private package ZLib.Thin is
+
+ -- From zconf.h
+
+ MAX_MEM_LEVEL : constant := 9; -- zconf.h:105
+ -- zconf.h:105
+ MAX_WBITS : constant := 15; -- zconf.h:115
+ -- 32K LZ77 window
+ -- zconf.h:115
+ SEEK_SET : constant := 8#0000#; -- zconf.h:244
+ -- Seek from beginning of file.
+ -- zconf.h:244
+ SEEK_CUR : constant := 1; -- zconf.h:245
+ -- Seek from current position.
+ -- zconf.h:245
+ SEEK_END : constant := 2; -- zconf.h:246
+ -- Set file pointer to EOF plus "offset"
+ -- zconf.h:246
+
+ type Byte is new Interfaces.C.unsigned_char; -- 8 bits
+ -- zconf.h:214
+ type UInt is new Interfaces.C.unsigned; -- 16 bits or more
+ -- zconf.h:216
+ type Int is new Interfaces.C.int;
+
+ type ULong is new Interfaces.C.unsigned_long; -- 32 bits or more
+ -- zconf.h:217
+ subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
+
+ type ULong_Access is access ULong;
+ type Int_Access is access Int;
+
+ subtype Voidp is System.Address; -- zconf.h:232
+
+ subtype Byte_Access is Voidp;
+
+ Nul : constant Voidp := System.Null_Address;
+ -- end from zconf
+
+ Z_NO_FLUSH : constant := 8#0000#; -- zlib.h:125
+ -- zlib.h:125
+ Z_PARTIAL_FLUSH : constant := 1; -- zlib.h:126
+ -- will be removed, use
+ -- Z_SYNC_FLUSH instead
+ -- zlib.h:126
+ Z_SYNC_FLUSH : constant := 2; -- zlib.h:127
+ -- zlib.h:127
+ Z_FULL_FLUSH : constant := 3; -- zlib.h:128
+ -- zlib.h:128
+ Z_FINISH : constant := 4; -- zlib.h:129
+ -- zlib.h:129
+ Z_OK : constant := 8#0000#; -- zlib.h:132
+ -- zlib.h:132
+ Z_STREAM_END : constant := 1; -- zlib.h:133
+ -- zlib.h:133
+ Z_NEED_DICT : constant := 2; -- zlib.h:134
+ -- zlib.h:134
+ Z_ERRNO : constant := -1; -- zlib.h:135
+ -- zlib.h:135
+ Z_STREAM_ERROR : constant := -2; -- zlib.h:136
+ -- zlib.h:136
+ Z_DATA_ERROR : constant := -3; -- zlib.h:137
+ -- zlib.h:137
+ Z_MEM_ERROR : constant := -4; -- zlib.h:138
+ -- zlib.h:138
+ Z_BUF_ERROR : constant := -5; -- zlib.h:139
+ -- zlib.h:139
+ Z_VERSION_ERROR : constant := -6; -- zlib.h:140
+ -- zlib.h:140
+ Z_NO_COMPRESSION : constant := 8#0000#; -- zlib.h:145
+ -- zlib.h:145
+ Z_BEST_SPEED : constant := 1; -- zlib.h:146
+ -- zlib.h:146
+ Z_BEST_COMPRESSION : constant := 9; -- zlib.h:147
+ -- zlib.h:147
+ Z_DEFAULT_COMPRESSION : constant := -1; -- zlib.h:148
+ -- zlib.h:148
+ Z_FILTERED : constant := 1; -- zlib.h:151
+ -- zlib.h:151
+ Z_HUFFMAN_ONLY : constant := 2; -- zlib.h:152
+ -- zlib.h:152
+ Z_DEFAULT_STRATEGY : constant := 8#0000#; -- zlib.h:153
+ -- zlib.h:153
+ Z_BINARY : constant := 8#0000#; -- zlib.h:156
+ -- zlib.h:156
+ Z_ASCII : constant := 1; -- zlib.h:157
+ -- zlib.h:157
+ Z_UNKNOWN : constant := 2; -- zlib.h:158
+ -- zlib.h:158
+ Z_DEFLATED : constant := 8; -- zlib.h:161
+ -- zlib.h:161
+ Z_NULL : constant := 8#0000#; -- zlib.h:164
+ -- for initializing zalloc, zfree, opaque
+ -- zlib.h:164
+ type gzFile is new Voidp; -- zlib.h:646
+
+ type Z_Stream is private;
+
+ type Z_Streamp is access all Z_Stream; -- zlib.h:89
+
+ type alloc_func is access function
+ (Opaque : Voidp;
+ Items : UInt;
+ Size : UInt)
+ return Voidp; -- zlib.h:63
+
+ type free_func is access procedure (opaque : Voidp; address : Voidp);
+
+ function zlibVersion return Chars_Ptr;
+
+ function Deflate (strm : Z_Streamp; flush : Int) return Int;
+
+ function DeflateEnd (strm : Z_Streamp) return Int;
+
+ function Inflate (strm : Z_Streamp; flush : Int) return Int;
+
+ function InflateEnd (strm : Z_Streamp) return Int;
+
+ function deflateSetDictionary
+ (strm : Z_Streamp;
+ dictionary : Byte_Access;
+ dictLength : UInt)
+ return Int;
+
+ function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int;
+ -- zlib.h:478
+
+ function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495
+
+ function deflateParams
+ (strm : Z_Streamp;
+ level : Int;
+ strategy : Int)
+ return Int; -- zlib.h:506
+
+ function inflateSetDictionary
+ (strm : Z_Streamp;
+ dictionary : Byte_Access;
+ dictLength : UInt)
+ return Int; -- zlib.h:548
+
+ function inflateSync (strm : Z_Streamp) return Int; -- zlib.h:565
+
+ function inflateReset (strm : Z_Streamp) return Int; -- zlib.h:580
+
+ function compress
+ (dest : Byte_Access;
+ destLen : ULong_Access;
+ source : Byte_Access;
+ sourceLen : ULong)
+ return Int; -- zlib.h:601
+
+ function compress2
+ (dest : Byte_Access;
+ destLen : ULong_Access;
+ source : Byte_Access;
+ sourceLen : ULong;
+ level : Int)
+ return Int; -- zlib.h:615
+
+ function uncompress
+ (dest : Byte_Access;
+ destLen : ULong_Access;
+ source : Byte_Access;
+ sourceLen : ULong)
+ return Int;
+
+ function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile;
+
+ function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile;
+
+ function gzsetparams
+ (file : gzFile;
+ level : Int;
+ strategy : Int)
+ return Int;
+
+ function gzread
+ (file : gzFile;
+ buf : Voidp;
+ len : UInt)
+ return Int;
+
+ function gzwrite
+ (file : in gzFile;
+ buf : in Voidp;
+ len : in UInt)
+ return Int;
+
+ function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int;
+
+ function gzputs (file : in gzFile; s : in Chars_Ptr) return Int;
+
+ function gzgets
+ (file : gzFile;
+ buf : Chars_Ptr;
+ len : Int)
+ return Chars_Ptr;
+
+ function gzputc (file : gzFile; char : Int) return Int;
+
+ function gzgetc (file : gzFile) return Int;
+
+ function gzflush (file : gzFile; flush : Int) return Int;
+
+ function gzseek
+ (file : gzFile;
+ offset : Int;
+ whence : Int)
+ return Int;
+
+ function gzrewind (file : gzFile) return Int;
+
+ function gztell (file : gzFile) return Int;
+
+ function gzeof (file : gzFile) return Int;
+
+ function gzclose (file : gzFile) return Int;
+
+ function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr;
+
+ function adler32
+ (adler : ULong;
+ buf : Byte_Access;
+ len : UInt)
+ return ULong;
+
+ function crc32
+ (crc : ULong;
+ buf : Byte_Access;
+ len : UInt)
+ return ULong;
+
+ function deflateInit
+ (strm : Z_Streamp;
+ level : Int;
+ version : Chars_Ptr;
+ stream_size : Int)
+ return Int;
+
+ function deflateInit2
+ (strm : Z_Streamp;
+ level : Int;
+ method : Int;
+ windowBits : Int;
+ memLevel : Int;
+ strategy : Int;
+ version : Chars_Ptr;
+ stream_size : Int)
+ return Int;
+
+ function Deflate_Init
+ (strm : Z_Streamp;
+ level : Int;
+ method : Int;
+ windowBits : Int;
+ memLevel : Int;
+ strategy : Int)
+ return Int;
+ pragma Inline (Deflate_Init);
+
+ function inflateInit
+ (strm : Z_Streamp;
+ version : Chars_Ptr;
+ stream_size : Int)
+ return Int;
+
+ function inflateInit2
+ (strm : in Z_Streamp;
+ windowBits : in Int;
+ version : in Chars_Ptr;
+ stream_size : in Int)
+ return Int;
+
+ function inflateBackInit
+ (strm : in Z_Streamp;
+ windowBits : in Int;
+ window : in Byte_Access;
+ version : in Chars_Ptr;
+ stream_size : in Int)
+ return Int;
+ -- Size of window have to be 2**windowBits.
+
+ function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int;
+ pragma Inline (Inflate_Init);
+
+ function zError (err : Int) return Chars_Ptr;
+
+ function inflateSyncPoint (z : Z_Streamp) return Int;
+
+ function get_crc_table return ULong_Access;
+
+ -- Interface to the available fields of the z_stream structure.
+ -- The application must update next_in and avail_in when avail_in has
+ -- dropped to zero. It must update next_out and avail_out when avail_out
+ -- has dropped to zero. The application must initialize zalloc, zfree and
+ -- opaque before calling the init function.
+
+ procedure Set_In
+ (Strm : in out Z_Stream;
+ Buffer : in Voidp;
+ Size : in UInt);
+ pragma Inline (Set_In);
+
+ procedure Set_Out
+ (Strm : in out Z_Stream;
+ Buffer : in Voidp;
+ Size : in UInt);
+ pragma Inline (Set_Out);
+
+ procedure Set_Mem_Func
+ (Strm : in out Z_Stream;
+ Opaque : in Voidp;
+ Alloc : in alloc_func;
+ Free : in free_func);
+ pragma Inline (Set_Mem_Func);
+
+ function Last_Error_Message (Strm : in Z_Stream) return String;
+ pragma Inline (Last_Error_Message);
+
+ function Avail_Out (Strm : in Z_Stream) return UInt;
+ pragma Inline (Avail_Out);
+
+ function Avail_In (Strm : in Z_Stream) return UInt;
+ pragma Inline (Avail_In);
+
+ function Total_In (Strm : in Z_Stream) return ULong;
+ pragma Inline (Total_In);
+
+ function Total_Out (Strm : in Z_Stream) return ULong;
+ pragma Inline (Total_Out);
+
+ function inflateCopy
+ (dest : in Z_Streamp;
+ Source : in Z_Streamp)
+ return Int;
+
+ function compressBound (Source_Len : in ULong) return ULong;
+
+ function deflateBound
+ (Strm : in Z_Streamp;
+ Source_Len : in ULong)
+ return ULong;
+
+ function gzungetc (C : in Int; File : in gzFile) return Int;
+
+ function zlibCompileFlags return ULong;
+
+private
+
+ type Z_Stream is record -- zlib.h:68
+ Next_In : Voidp := Nul; -- next input byte
+ Avail_In : UInt := 0; -- number of bytes available at next_in
+ Total_In : ULong := 0; -- total nb of input bytes read so far
+ Next_Out : Voidp := Nul; -- next output byte should be put there
+ Avail_Out : UInt := 0; -- remaining free space at next_out
+ Total_Out : ULong := 0; -- total nb of bytes output so far
+ msg : Chars_Ptr; -- last error message, NULL if no error
+ state : Voidp; -- not visible by applications
+ zalloc : alloc_func := null; -- used to allocate the internal state
+ zfree : free_func := null; -- used to free the internal state
+ opaque : Voidp; -- private data object passed to
+ -- zalloc and zfree
+ data_type : Int; -- best guess about the data type:
+ -- ascii or binary
+ adler : ULong; -- adler32 value of the uncompressed
+ -- data
+ reserved : ULong; -- reserved for future use
+ end record;
+
+ pragma Convention (C, Z_Stream);
+
+ pragma Import (C, zlibVersion, "zlibVersion");
+ pragma Import (C, Deflate, "deflate");
+ pragma Import (C, DeflateEnd, "deflateEnd");
+ pragma Import (C, Inflate, "inflate");
+ pragma Import (C, InflateEnd, "inflateEnd");
+ pragma Import (C, deflateSetDictionary, "deflateSetDictionary");
+ pragma Import (C, deflateCopy, "deflateCopy");
+ pragma Import (C, deflateReset, "deflateReset");
+ pragma Import (C, deflateParams, "deflateParams");
+ pragma Import (C, inflateSetDictionary, "inflateSetDictionary");
+ pragma Import (C, inflateSync, "inflateSync");
+ pragma Import (C, inflateReset, "inflateReset");
+ pragma Import (C, compress, "compress");
+ pragma Import (C, compress2, "compress2");
+ pragma Import (C, uncompress, "uncompress");
+ pragma Import (C, gzopen, "gzopen");
+ pragma Import (C, gzdopen, "gzdopen");
+ pragma Import (C, gzsetparams, "gzsetparams");
+ pragma Import (C, gzread, "gzread");
+ pragma Import (C, gzwrite, "gzwrite");
+ pragma Import (C, gzprintf, "gzprintf");
+ pragma Import (C, gzputs, "gzputs");
+ pragma Import (C, gzgets, "gzgets");
+ pragma Import (C, gzputc, "gzputc");
+ pragma Import (C, gzgetc, "gzgetc");
+ pragma Import (C, gzflush, "gzflush");
+ pragma Import (C, gzseek, "gzseek");
+ pragma Import (C, gzrewind, "gzrewind");
+ pragma Import (C, gztell, "gztell");
+ pragma Import (C, gzeof, "gzeof");
+ pragma Import (C, gzclose, "gzclose");
+ pragma Import (C, gzerror, "gzerror");
+ pragma Import (C, adler32, "adler32");
+ pragma Import (C, crc32, "crc32");
+ pragma Import (C, deflateInit, "deflateInit_");
+ pragma Import (C, inflateInit, "inflateInit_");
+ pragma Import (C, deflateInit2, "deflateInit2_");
+ pragma Import (C, inflateInit2, "inflateInit2_");
+ pragma Import (C, zError, "zError");
+ pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
+ pragma Import (C, get_crc_table, "get_crc_table");
+
+ -- since zlib 1.2.0:
+
+ pragma Import (C, inflateCopy, "inflateCopy");
+ pragma Import (C, compressBound, "compressBound");
+ pragma Import (C, deflateBound, "deflateBound");
+ pragma Import (C, gzungetc, "gzungetc");
+ pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
+
+ pragma Import (C, inflateBackInit, "inflateBackInit_");
+
+ -- I stopped binding the inflateBack routines, becouse realize that
+ -- it does not support zlib and gzip headers for now, and have no
+ -- symmetric deflateBack routines.
+ -- ZLib-Ada is symmetric regarding deflate/inflate data transformation
+ -- and has a similar generic callback interface for the
+ -- deflate/inflate transformation based on the regular Deflate/Inflate
+ -- routines.
+
+ -- pragma Import (C, inflateBack, "inflateBack");
+ -- pragma Import (C, inflateBackEnd, "inflateBackEnd");
+
+end ZLib.Thin;
--- /dev/null
+----------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2004 Dmitriy Anisimkov --
+-- --
+-- Open source license information is in the zlib.ads file. --
+----------------------------------------------------------------
+
+-- $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Exceptions;
+with Ada.Unchecked_Conversion;
+with Ada.Unchecked_Deallocation;
+
+with Interfaces.C.Strings;
+
+with ZLib.Thin;
+
+package body ZLib is
+
+ use type Thin.Int;
+
+ type Z_Stream is new Thin.Z_Stream;
+
+ type Return_Code_Enum is
+ (OK,
+ STREAM_END,
+ NEED_DICT,
+ ERRNO,
+ STREAM_ERROR,
+ DATA_ERROR,
+ MEM_ERROR,
+ BUF_ERROR,
+ VERSION_ERROR);
+
+ type Flate_Step_Function is access
+ function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
+ pragma Convention (C, Flate_Step_Function);
+
+ type Flate_End_Function is access
+ function (Ctrm : in Thin.Z_Streamp) return Thin.Int;
+ pragma Convention (C, Flate_End_Function);
+
+ type Flate_Type is record
+ Step : Flate_Step_Function;
+ Done : Flate_End_Function;
+ end record;
+
+ subtype Footer_Array is Stream_Element_Array (1 .. 8);
+
+ Simple_GZip_Header : constant Stream_Element_Array (1 .. 10)
+ := (16#1f#, 16#8b#, -- Magic header
+ 16#08#, -- Z_DEFLATED
+ 16#00#, -- Flags
+ 16#00#, 16#00#, 16#00#, 16#00#, -- Time
+ 16#00#, -- XFlags
+ 16#03# -- OS code
+ );
+ -- The simplest gzip header is not for informational, but just for
+ -- gzip format compatibility.
+ -- Note that some code below is using assumption
+ -- Simple_GZip_Header'Last > Footer_Array'Last, so do not make
+ -- Simple_GZip_Header'Last <= Footer_Array'Last.
+
+ Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum
+ := (0 => OK,
+ 1 => STREAM_END,
+ 2 => NEED_DICT,
+ -1 => ERRNO,
+ -2 => STREAM_ERROR,
+ -3 => DATA_ERROR,
+ -4 => MEM_ERROR,
+ -5 => BUF_ERROR,
+ -6 => VERSION_ERROR);
+
+ Flate : constant array (Boolean) of Flate_Type
+ := (True => (Step => Thin.Deflate'Access,
+ Done => Thin.DeflateEnd'Access),
+ False => (Step => Thin.Inflate'Access,
+ Done => Thin.InflateEnd'Access));
+
+ Flush_Finish : constant array (Boolean) of Flush_Mode
+ := (True => Finish, False => No_Flush);
+
+ procedure Raise_Error (Stream : in Z_Stream);
+ pragma Inline (Raise_Error);
+
+ procedure Raise_Error (Message : in String);
+ pragma Inline (Raise_Error);
+
+ procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
+
+ procedure Free is new Ada.Unchecked_Deallocation
+ (Z_Stream, Z_Stream_Access);
+
+ function To_Thin_Access is new Ada.Unchecked_Conversion
+ (Z_Stream_Access, Thin.Z_Streamp);
+
+ procedure Translate_GZip
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode);
+ -- Separate translate routine for make gzip header.
+
+ procedure Translate_Auto
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode);
+ -- translate routine without additional headers.
+
+ -----------------
+ -- Check_Error --
+ -----------------
+
+ procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
+ use type Thin.Int;
+ begin
+ if Code /= Thin.Z_OK then
+ Raise_Error
+ (Return_Code_Enum'Image (Return_Code (Code))
+ & ": " & Last_Error_Message (Stream));
+ end if;
+ end Check_Error;
+
+ -----------
+ -- Close --
+ -----------
+
+ procedure Close
+ (Filter : in out Filter_Type;
+ Ignore_Error : in Boolean := False)
+ is
+ Code : Thin.Int;
+ begin
+ if not Ignore_Error and then not Is_Open (Filter) then
+ raise Status_Error;
+ end if;
+
+ Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
+
+ if Ignore_Error or else Code = Thin.Z_OK then
+ Free (Filter.Strm);
+ else
+ declare
+ Error_Message : constant String
+ := Last_Error_Message (Filter.Strm.all);
+ begin
+ Free (Filter.Strm);
+ Ada.Exceptions.Raise_Exception
+ (ZLib_Error'Identity,
+ Return_Code_Enum'Image (Return_Code (Code))
+ & ": " & Error_Message);
+ end;
+ end if;
+ end Close;
+
+ -----------
+ -- CRC32 --
+ -----------
+
+ function CRC32
+ (CRC : in Unsigned_32;
+ Data : in Ada.Streams.Stream_Element_Array)
+ return Unsigned_32
+ is
+ use Thin;
+ begin
+ return Unsigned_32 (crc32 (ULong (CRC),
+ Data'Address,
+ Data'Length));
+ end CRC32;
+
+ procedure CRC32
+ (CRC : in out Unsigned_32;
+ Data : in Ada.Streams.Stream_Element_Array) is
+ begin
+ CRC := CRC32 (CRC, Data);
+ end CRC32;
+
+ ------------------
+ -- Deflate_Init --
+ ------------------
+
+ procedure Deflate_Init
+ (Filter : in out Filter_Type;
+ Level : in Compression_Level := Default_Compression;
+ Strategy : in Strategy_Type := Default_Strategy;
+ Method : in Compression_Method := Deflated;
+ Window_Bits : in Window_Bits_Type := Default_Window_Bits;
+ Memory_Level : in Memory_Level_Type := Default_Memory_Level;
+ Header : in Header_Type := Default)
+ is
+ use type Thin.Int;
+ Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+ begin
+ if Is_Open (Filter) then
+ raise Status_Error;
+ end if;
+
+ -- We allow ZLib to make header only in case of default header type.
+ -- Otherwise we would either do header by ourselfs, or do not do
+ -- header at all.
+
+ if Header = None or else Header = GZip then
+ Win_Bits := -Win_Bits;
+ end if;
+
+ -- For the GZip CRC calculation and make headers.
+
+ if Header = GZip then
+ Filter.CRC := 0;
+ Filter.Offset := Simple_GZip_Header'First;
+ else
+ Filter.Offset := Simple_GZip_Header'Last + 1;
+ end if;
+
+ Filter.Strm := new Z_Stream;
+ Filter.Compression := True;
+ Filter.Stream_End := False;
+ Filter.Header := Header;
+
+ if Thin.Deflate_Init
+ (To_Thin_Access (Filter.Strm),
+ Level => Thin.Int (Level),
+ method => Thin.Int (Method),
+ windowBits => Win_Bits,
+ memLevel => Thin.Int (Memory_Level),
+ strategy => Thin.Int (Strategy)) /= Thin.Z_OK
+ then
+ Raise_Error (Filter.Strm.all);
+ end if;
+ end Deflate_Init;
+
+ -----------
+ -- Flush --
+ -----------
+
+ procedure Flush
+ (Filter : in out Filter_Type;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode)
+ is
+ No_Data : Stream_Element_Array := (1 .. 0 => 0);
+ Last : Stream_Element_Offset;
+ begin
+ Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush);
+ end Flush;
+
+ -----------------------
+ -- Generic_Translate --
+ -----------------------
+
+ procedure Generic_Translate
+ (Filter : in out ZLib.Filter_Type;
+ In_Buffer_Size : in Integer := Default_Buffer_Size;
+ Out_Buffer_Size : in Integer := Default_Buffer_Size)
+ is
+ In_Buffer : Stream_Element_Array
+ (1 .. Stream_Element_Offset (In_Buffer_Size));
+ Out_Buffer : Stream_Element_Array
+ (1 .. Stream_Element_Offset (Out_Buffer_Size));
+ Last : Stream_Element_Offset;
+ In_Last : Stream_Element_Offset;
+ In_First : Stream_Element_Offset;
+ Out_Last : Stream_Element_Offset;
+ begin
+ Main : loop
+ Data_In (In_Buffer, Last);
+
+ In_First := In_Buffer'First;
+
+ loop
+ Translate
+ (Filter => Filter,
+ In_Data => In_Buffer (In_First .. Last),
+ In_Last => In_Last,
+ Out_Data => Out_Buffer,
+ Out_Last => Out_Last,
+ Flush => Flush_Finish (Last < In_Buffer'First));
+
+ if Out_Buffer'First <= Out_Last then
+ Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+ end if;
+
+ exit Main when Stream_End (Filter);
+
+ -- The end of in buffer.
+
+ exit when In_Last = Last;
+
+ In_First := In_Last + 1;
+ end loop;
+ end loop Main;
+
+ end Generic_Translate;
+
+ ------------------
+ -- Inflate_Init --
+ ------------------
+
+ procedure Inflate_Init
+ (Filter : in out Filter_Type;
+ Window_Bits : in Window_Bits_Type := Default_Window_Bits;
+ Header : in Header_Type := Default)
+ is
+ use type Thin.Int;
+ Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+
+ procedure Check_Version;
+ -- Check the latest header types compatibility.
+
+ procedure Check_Version is
+ begin
+ if Version <= "1.1.4" then
+ Raise_Error
+ ("Inflate header type " & Header_Type'Image (Header)
+ & " incompatible with ZLib version " & Version);
+ end if;
+ end Check_Version;
+
+ begin
+ if Is_Open (Filter) then
+ raise Status_Error;
+ end if;
+
+ case Header is
+ when None =>
+ Check_Version;
+
+ -- Inflate data without headers determined
+ -- by negative Win_Bits.
+
+ Win_Bits := -Win_Bits;
+ when GZip =>
+ Check_Version;
+
+ -- Inflate gzip data defined by flag 16.
+
+ Win_Bits := Win_Bits + 16;
+ when Auto =>
+ Check_Version;
+
+ -- Inflate with automatic detection
+ -- of gzip or native header defined by flag 32.
+
+ Win_Bits := Win_Bits + 32;
+ when Default => null;
+ end case;
+
+ Filter.Strm := new Z_Stream;
+ Filter.Compression := False;
+ Filter.Stream_End := False;
+ Filter.Header := Header;
+
+ if Thin.Inflate_Init
+ (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK
+ then
+ Raise_Error (Filter.Strm.all);
+ end if;
+ end Inflate_Init;
+
+ -------------
+ -- Is_Open --
+ -------------
+
+ function Is_Open (Filter : in Filter_Type) return Boolean is
+ begin
+ return Filter.Strm /= null;
+ end Is_Open;
+
+ -----------------
+ -- Raise_Error --
+ -----------------
+
+ procedure Raise_Error (Message : in String) is
+ begin
+ Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
+ end Raise_Error;
+
+ procedure Raise_Error (Stream : in Z_Stream) is
+ begin
+ Raise_Error (Last_Error_Message (Stream));
+ end Raise_Error;
+
+ ----------
+ -- Read --
+ ----------
+
+ procedure Read
+ (Filter : in out Filter_Type;
+ Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode := No_Flush)
+ is
+ In_Last : Stream_Element_Offset;
+ Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+ V_Flush : Flush_Mode := Flush;
+
+ begin
+ pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+ pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+
+ loop
+ if Rest_Last = Buffer'First - 1 then
+ V_Flush := Finish;
+
+ elsif Rest_First > Rest_Last then
+ Read (Buffer, Rest_Last);
+ Rest_First := Buffer'First;
+
+ if Rest_Last < Buffer'First then
+ V_Flush := Finish;
+ end if;
+ end if;
+
+ Translate
+ (Filter => Filter,
+ In_Data => Buffer (Rest_First .. Rest_Last),
+ In_Last => In_Last,
+ Out_Data => Item (Item_First .. Item'Last),
+ Out_Last => Last,
+ Flush => V_Flush);
+
+ Rest_First := In_Last + 1;
+
+ exit when Stream_End (Filter)
+ or else Last = Item'Last
+ or else (Last >= Item'First and then Allow_Read_Some);
+
+ Item_First := Last + 1;
+ end loop;
+ end Read;
+
+ ----------------
+ -- Stream_End --
+ ----------------
+
+ function Stream_End (Filter : in Filter_Type) return Boolean is
+ begin
+ if Filter.Header = GZip and Filter.Compression then
+ return Filter.Stream_End
+ and then Filter.Offset = Footer_Array'Last + 1;
+ else
+ return Filter.Stream_End;
+ end if;
+ end Stream_End;
+
+ --------------
+ -- Total_In --
+ --------------
+
+ function Total_In (Filter : in Filter_Type) return Count is
+ begin
+ return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all));
+ end Total_In;
+
+ ---------------
+ -- Total_Out --
+ ---------------
+
+ function Total_Out (Filter : in Filter_Type) return Count is
+ begin
+ return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all));
+ end Total_Out;
+
+ ---------------
+ -- Translate --
+ ---------------
+
+ procedure Translate
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode) is
+ begin
+ if Filter.Header = GZip and then Filter.Compression then
+ Translate_GZip
+ (Filter => Filter,
+ In_Data => In_Data,
+ In_Last => In_Last,
+ Out_Data => Out_Data,
+ Out_Last => Out_Last,
+ Flush => Flush);
+ else
+ Translate_Auto
+ (Filter => Filter,
+ In_Data => In_Data,
+ In_Last => In_Last,
+ Out_Data => Out_Data,
+ Out_Last => Out_Last,
+ Flush => Flush);
+ end if;
+ end Translate;
+
+ --------------------
+ -- Translate_Auto --
+ --------------------
+
+ procedure Translate_Auto
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode)
+ is
+ use type Thin.Int;
+ Code : Thin.Int;
+
+ begin
+ if not Is_Open (Filter) then
+ raise Status_Error;
+ end if;
+
+ if Out_Data'Length = 0 and then In_Data'Length = 0 then
+ raise Constraint_Error;
+ end if;
+
+ Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length);
+ Set_In (Filter.Strm.all, In_Data'Address, In_Data'Length);
+
+ Code := Flate (Filter.Compression).Step
+ (To_Thin_Access (Filter.Strm),
+ Thin.Int (Flush));
+
+ if Code = Thin.Z_STREAM_END then
+ Filter.Stream_End := True;
+ else
+ Check_Error (Filter.Strm.all, Code);
+ end if;
+
+ In_Last := In_Data'Last
+ - Stream_Element_Offset (Avail_In (Filter.Strm.all));
+ Out_Last := Out_Data'Last
+ - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
+ end Translate_Auto;
+
+ --------------------
+ -- Translate_GZip --
+ --------------------
+
+ procedure Translate_GZip
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode)
+ is
+ Out_First : Stream_Element_Offset;
+
+ procedure Add_Data (Data : in Stream_Element_Array);
+ -- Add data to stream from the Filter.Offset till necessary,
+ -- used for add gzip headr/footer.
+
+ procedure Put_32
+ (Item : in out Stream_Element_Array;
+ Data : in Unsigned_32);
+ pragma Inline (Put_32);
+
+ --------------
+ -- Add_Data --
+ --------------
+
+ procedure Add_Data (Data : in Stream_Element_Array) is
+ Data_First : Stream_Element_Offset renames Filter.Offset;
+ Data_Last : Stream_Element_Offset;
+ Data_Len : Stream_Element_Offset; -- -1
+ Out_Len : Stream_Element_Offset; -- -1
+ begin
+ Out_First := Out_Last + 1;
+
+ if Data_First > Data'Last then
+ return;
+ end if;
+
+ Data_Len := Data'Last - Data_First;
+ Out_Len := Out_Data'Last - Out_First;
+
+ if Data_Len <= Out_Len then
+ Out_Last := Out_First + Data_Len;
+ Data_Last := Data'Last;
+ else
+ Out_Last := Out_Data'Last;
+ Data_Last := Data_First + Out_Len;
+ end if;
+
+ Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last);
+
+ Data_First := Data_Last + 1;
+ Out_First := Out_Last + 1;
+ end Add_Data;
+
+ ------------
+ -- Put_32 --
+ ------------
+
+ procedure Put_32
+ (Item : in out Stream_Element_Array;
+ Data : in Unsigned_32)
+ is
+ D : Unsigned_32 := Data;
+ begin
+ for J in Item'First .. Item'First + 3 loop
+ Item (J) := Stream_Element (D and 16#FF#);
+ D := Shift_Right (D, 8);
+ end loop;
+ end Put_32;
+
+ begin
+ Out_Last := Out_Data'First - 1;
+
+ if not Filter.Stream_End then
+ Add_Data (Simple_GZip_Header);
+
+ Translate_Auto
+ (Filter => Filter,
+ In_Data => In_Data,
+ In_Last => In_Last,
+ Out_Data => Out_Data (Out_First .. Out_Data'Last),
+ Out_Last => Out_Last,
+ Flush => Flush);
+
+ CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
+ end if;
+
+ if Filter.Stream_End and then Out_Last <= Out_Data'Last then
+ -- This detection method would work only when
+ -- Simple_GZip_Header'Last > Footer_Array'Last
+
+ if Filter.Offset = Simple_GZip_Header'Last + 1 then
+ Filter.Offset := Footer_Array'First;
+ end if;
+
+ declare
+ Footer : Footer_Array;
+ begin
+ Put_32 (Footer, Filter.CRC);
+ Put_32 (Footer (Footer'First + 4 .. Footer'Last),
+ Unsigned_32 (Total_In (Filter)));
+ Add_Data (Footer);
+ end;
+ end if;
+ end Translate_GZip;
+
+ -------------
+ -- Version --
+ -------------
+
+ function Version return String is
+ begin
+ return Interfaces.C.Strings.Value (Thin.zlibVersion);
+ end Version;
+
+ -----------
+ -- Write --
+ -----------
+
+ procedure Write
+ (Filter : in out Filter_Type;
+ Item : in Ada.Streams.Stream_Element_Array;
+ Flush : in Flush_Mode := No_Flush)
+ is
+ Buffer : Stream_Element_Array (1 .. Buffer_Size);
+ In_Last : Stream_Element_Offset;
+ Out_Last : Stream_Element_Offset;
+ In_First : Stream_Element_Offset := Item'First;
+ begin
+ if Item'Length = 0 and Flush = No_Flush then
+ return;
+ end if;
+
+ loop
+ Translate
+ (Filter => Filter,
+ In_Data => Item (In_First .. Item'Last),
+ In_Last => In_Last,
+ Out_Data => Buffer,
+ Out_Last => Out_Last,
+ Flush => Flush);
+
+ if Out_Last >= Buffer'First then
+ Write (Buffer (1 .. Out_Last));
+ end if;
+
+ exit when In_Last = Item'Last or Stream_End (Filter);
+
+ In_First := In_Last + 1;
+ end loop;
+ end Write;
+
+end ZLib;
--- /dev/null
+------------------------------------------------------------------------------
+-- ZLib for Ada thick binding. --
+-- --
+-- Copyright (C) 2002-2004 Dmitriy Anisimkov --
+-- --
+-- This library is free software; you can redistribute it and/or modify --
+-- it under the terms of the GNU General Public License as published by --
+-- the Free Software Foundation; either version 2 of the License, or (at --
+-- your option) any later version. --
+-- --
+-- This library is distributed in the hope that it will be useful, but --
+-- WITHOUT ANY WARRANTY; without even the implied warranty of --
+-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU --
+-- General Public License for more details. --
+-- --
+-- You should have received a copy of the GNU General Public License --
+-- along with this library; if not, write to the Free Software Foundation, --
+-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. --
+-- --
+-- As a special exception, if other files instantiate generics from this --
+-- unit, or you link this unit with other files to produce an executable, --
+-- this unit does not by itself cause the resulting executable to be --
+-- covered by the GNU General Public License. This exception does not --
+-- however invalidate any other reasons why the executable file might be --
+-- covered by the GNU Public License. --
+------------------------------------------------------------------------------
+
+-- $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Streams;
+
+with Interfaces;
+
+package ZLib is
+
+ ZLib_Error : exception;
+ Status_Error : exception;
+
+ type Compression_Level is new Integer range -1 .. 9;
+
+ type Flush_Mode is private;
+
+ type Compression_Method is private;
+
+ type Window_Bits_Type is new Integer range 8 .. 15;
+
+ type Memory_Level_Type is new Integer range 1 .. 9;
+
+ type Unsigned_32 is new Interfaces.Unsigned_32;
+
+ type Strategy_Type is private;
+
+ type Header_Type is (None, Auto, Default, GZip);
+ -- Header type usage have a some limitation for inflate.
+ -- See comment for Inflate_Init.
+
+ subtype Count is Ada.Streams.Stream_Element_Count;
+
+ Default_Memory_Level : constant Memory_Level_Type := 8;
+ Default_Window_Bits : constant Window_Bits_Type := 15;
+
+ ----------------------------------
+ -- Compression method constants --
+ ----------------------------------
+
+ Deflated : constant Compression_Method;
+ -- Only one method allowed in this ZLib version
+
+ ---------------------------------
+ -- Compression level constants --
+ ---------------------------------
+
+ No_Compression : constant Compression_Level := 0;
+ Best_Speed : constant Compression_Level := 1;
+ Best_Compression : constant Compression_Level := 9;
+ Default_Compression : constant Compression_Level := -1;
+
+ --------------------------
+ -- Flush mode constants --
+ --------------------------
+
+ No_Flush : constant Flush_Mode;
+ -- Regular way for compression, no flush
+
+ Partial_Flush : constant Flush_Mode;
+ -- Will be removed, use Z_SYNC_FLUSH instead
+
+ Sync_Flush : constant Flush_Mode;
+ -- All pending output is flushed to the output buffer and the output
+ -- is aligned on a byte boundary, so that the decompressor can get all
+ -- input data available so far. (In particular avail_in is zero after the
+ -- call if enough output space has been provided before the call.)
+ -- Flushing may degrade compression for some compression algorithms and so
+ -- it should be used only when necessary.
+
+ Block_Flush : constant Flush_Mode;
+ -- Z_BLOCK requests that inflate() stop
+ -- if and when it get to the next deflate block boundary. When decoding the
+ -- zlib or gzip format, this will cause inflate() to return immediately
+ -- after the header and before the first block. When doing a raw inflate,
+ -- inflate() will go ahead and process the first block, and will return
+ -- when it gets to the end of that block, or when it runs out of data.
+
+ Full_Flush : constant Flush_Mode;
+ -- All output is flushed as with SYNC_FLUSH, and the compression state
+ -- is reset so that decompression can restart from this point if previous
+ -- compressed data has been damaged or if random access is desired. Using
+ -- Full_Flush too often can seriously degrade the compression.
+
+ Finish : constant Flush_Mode;
+ -- Just for tell the compressor that input data is complete.
+
+ ------------------------------------
+ -- Compression strategy constants --
+ ------------------------------------
+
+ -- RLE stategy could be used only in version 1.2.0 and later.
+
+ Filtered : constant Strategy_Type;
+ Huffman_Only : constant Strategy_Type;
+ RLE : constant Strategy_Type;
+ Default_Strategy : constant Strategy_Type;
+
+ Default_Buffer_Size : constant := 4096;
+
+ type Filter_Type is tagged limited private;
+ -- The filter is for compression and for decompression.
+ -- The usage of the type is depend of its initialization.
+
+ function Version return String;
+ pragma Inline (Version);
+ -- Return string representation of the ZLib version.
+
+ procedure Deflate_Init
+ (Filter : in out Filter_Type;
+ Level : in Compression_Level := Default_Compression;
+ Strategy : in Strategy_Type := Default_Strategy;
+ Method : in Compression_Method := Deflated;
+ Window_Bits : in Window_Bits_Type := Default_Window_Bits;
+ Memory_Level : in Memory_Level_Type := Default_Memory_Level;
+ Header : in Header_Type := Default);
+ -- Compressor initialization.
+ -- When Header parameter is Auto or Default, then default zlib header
+ -- would be provided for compressed data.
+ -- When Header is GZip, then gzip header would be set instead of
+ -- default header.
+ -- When Header is None, no header would be set for compressed data.
+
+ procedure Inflate_Init
+ (Filter : in out Filter_Type;
+ Window_Bits : in Window_Bits_Type := Default_Window_Bits;
+ Header : in Header_Type := Default);
+ -- Decompressor initialization.
+ -- Default header type mean that ZLib default header is expecting in the
+ -- input compressed stream.
+ -- Header type None mean that no header is expecting in the input stream.
+ -- GZip header type mean that GZip header is expecting in the
+ -- input compressed stream.
+ -- Auto header type mean that header type (GZip or Native) would be
+ -- detected automatically in the input stream.
+ -- Note that header types parameter values None, GZip and Auto are
+ -- supported for inflate routine only in ZLib versions 1.2.0.2 and later.
+ -- Deflate_Init is supporting all header types.
+
+ function Is_Open (Filter : in Filter_Type) return Boolean;
+ pragma Inline (Is_Open);
+ -- Is the filter opened for compression or decompression.
+
+ procedure Close
+ (Filter : in out Filter_Type;
+ Ignore_Error : in Boolean := False);
+ -- Closing the compression or decompressor.
+ -- If stream is closing before the complete and Ignore_Error is False,
+ -- The exception would be raised.
+
+ generic
+ with procedure Data_In
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset);
+ with procedure Data_Out
+ (Item : in Ada.Streams.Stream_Element_Array);
+ procedure Generic_Translate
+ (Filter : in out Filter_Type;
+ In_Buffer_Size : in Integer := Default_Buffer_Size;
+ Out_Buffer_Size : in Integer := Default_Buffer_Size);
+ -- Compress/decompress data fetch from Data_In routine and pass the result
+ -- to the Data_Out routine. User should provide Data_In and Data_Out
+ -- for compression/decompression data flow.
+ -- Compression or decompression depend on Filter initialization.
+
+ function Total_In (Filter : in Filter_Type) return Count;
+ pragma Inline (Total_In);
+ -- Returns total number of input bytes read so far
+
+ function Total_Out (Filter : in Filter_Type) return Count;
+ pragma Inline (Total_Out);
+ -- Returns total number of bytes output so far
+
+ function CRC32
+ (CRC : in Unsigned_32;
+ Data : in Ada.Streams.Stream_Element_Array)
+ return Unsigned_32;
+ pragma Inline (CRC32);
+ -- Compute CRC32, it could be necessary for make gzip format
+
+ procedure CRC32
+ (CRC : in out Unsigned_32;
+ Data : in Ada.Streams.Stream_Element_Array);
+ pragma Inline (CRC32);
+ -- Compute CRC32, it could be necessary for make gzip format
+
+ -------------------------------------------------
+ -- Below is more complex low level routines. --
+ -------------------------------------------------
+
+ procedure Translate
+ (Filter : in out Filter_Type;
+ In_Data : in Ada.Streams.Stream_Element_Array;
+ In_Last : out Ada.Streams.Stream_Element_Offset;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode);
+ -- Compress/decompress the In_Data buffer and place the result into
+ -- Out_Data. In_Last is the index of last element from In_Data accepted by
+ -- the Filter. Out_Last is the last element of the received data from
+ -- Filter. To tell the filter that incoming data are complete put the
+ -- Flush parameter to Finish.
+
+ function Stream_End (Filter : in Filter_Type) return Boolean;
+ pragma Inline (Stream_End);
+ -- Return the true when the stream is complete.
+
+ procedure Flush
+ (Filter : in out Filter_Type;
+ Out_Data : out Ada.Streams.Stream_Element_Array;
+ Out_Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode);
+ pragma Inline (Flush);
+ -- Flushing the data from the compressor.
+
+ generic
+ with procedure Write
+ (Item : in Ada.Streams.Stream_Element_Array);
+ -- User should provide this routine for accept
+ -- compressed/decompressed data.
+
+ Buffer_Size : in Ada.Streams.Stream_Element_Offset
+ := Default_Buffer_Size;
+ -- Buffer size for Write user routine.
+
+ procedure Write
+ (Filter : in out Filter_Type;
+ Item : in Ada.Streams.Stream_Element_Array;
+ Flush : in Flush_Mode := No_Flush);
+ -- Compress/Decompress data from Item to the generic parameter procedure
+ -- Write. Output buffer size could be set in Buffer_Size generic parameter.
+
+ generic
+ with procedure Read
+ (Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset);
+ -- User should provide data for compression/decompression
+ -- thru this routine.
+
+ Buffer : in out Ada.Streams.Stream_Element_Array;
+ -- Buffer for keep remaining data from the previous
+ -- back read.
+
+ Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
+ -- Rest_First have to be initialized to Buffer'Last + 1
+ -- Rest_Last have to be initialized to Buffer'Last
+ -- before usage.
+
+ Allow_Read_Some : in Boolean := False;
+ -- Is it allowed to return Last < Item'Last before end of data.
+
+ procedure Read
+ (Filter : in out Filter_Type;
+ Item : out Ada.Streams.Stream_Element_Array;
+ Last : out Ada.Streams.Stream_Element_Offset;
+ Flush : in Flush_Mode := No_Flush);
+ -- Compress/Decompress data from generic parameter procedure Read to the
+ -- Item. User should provide Buffer and initialized Rest_First, Rest_Last
+ -- indicators. If Allow_Read_Some is True, Read routines could return
+ -- Last < Item'Last only at end of stream.
+
+private
+
+ use Ada.Streams;
+
+ pragma Assert (Ada.Streams.Stream_Element'Size = 8);
+ pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+ type Flush_Mode is new Integer range 0 .. 5;
+
+ type Compression_Method is new Integer range 8 .. 8;
+
+ type Strategy_Type is new Integer range 0 .. 3;
+
+ No_Flush : constant Flush_Mode := 0;
+ Partial_Flush : constant Flush_Mode := 1;
+ Sync_Flush : constant Flush_Mode := 2;
+ Full_Flush : constant Flush_Mode := 3;
+ Finish : constant Flush_Mode := 4;
+ Block_Flush : constant Flush_Mode := 5;
+
+ Filtered : constant Strategy_Type := 1;
+ Huffman_Only : constant Strategy_Type := 2;
+ RLE : constant Strategy_Type := 3;
+ Default_Strategy : constant Strategy_Type := 0;
+
+ Deflated : constant Compression_Method := 8;
+
+ type Z_Stream;
+
+ type Z_Stream_Access is access all Z_Stream;
+
+ type Filter_Type is tagged limited record
+ Strm : Z_Stream_Access;
+ Compression : Boolean;
+ Stream_End : Boolean;
+ Header : Header_Type;
+ CRC : Unsigned_32;
+ Offset : Stream_Element_Offset;
+ -- Offset for gzip header/footer output.
+ end record;
+
+end ZLib;
--- /dev/null
+project Zlib is
+
+ for Languages use ("Ada");
+ for Source_Dirs use (".");
+ for Object_Dir use ".";
+ for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
+
+ package Compiler is
+ for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+ end Compiler;
+
+ package Linker is
+ for Default_Switches ("ada") use ("-lz");
+ end Linker;
+
+ package Builder is
+ for Default_Switches ("ada") use ("-s", "-gnatQ");
+ end Builder;
+
+end Zlib;
--- /dev/null
+/*
+ * match.S -- optimized version of longest_match()
+ * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the BSD License. Use by owners of Che Guevarra
+ * parafernalia is prohibited, where possible, and highly discouraged
+ * elsewhere.
+ */
+
+#ifndef NO_UNDERLINE
+# define match_init _match_init
+# define longest_match _longest_match
+#endif
+
+#define scanend ebx
+#define scanendw bx
+#define chainlenwmask edx /* high word: current chain len low word: s->wmask */
+#define curmatch rsi
+#define curmatchd esi
+#define windowbestlen r8
+#define scanalign r9
+#define scanalignd r9d
+#define window r10
+#define bestlen r11
+#define bestlend r11d
+#define scanstart r12d
+#define scanstartw r12w
+#define scan r13
+#define nicematch r14d
+#define limit r15
+#define limitd r15d
+#define prev rcx
+
+/*
+ * The 258 is a "magic number, not a parameter -- changing it
+ * breaks the hell loose
+ */
+#define MAX_MATCH (258)
+#define MIN_MATCH (3)
+#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
+#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+#define LocalVarsSize (112)
+#define _chainlenwmask ( 8-LocalVarsSize)(%rsp)
+#define _windowbestlen (16-LocalVarsSize)(%rsp)
+#define save_r14 (24-LocalVarsSize)(%rsp)
+#define save_rsi (32-LocalVarsSize)(%rsp)
+#define save_rbx (40-LocalVarsSize)(%rsp)
+#define save_r12 (56-LocalVarsSize)(%rsp)
+#define save_r13 (64-LocalVarsSize)(%rsp)
+#define save_r15 (80-LocalVarsSize)(%rsp)
+
+
+.globl match_init, longest_match
+
+/*
+ * On AMD64 the first argument of a function (in our case -- the pointer to
+ * deflate_state structure) is passed in %rdi, hence our offsets below are
+ * all off of that.
+ */
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+
+*/
+
+
+/*
+ to compile for XCode 3.2 on MacOSX x86_64
+ - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
+ */
+
+
+#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
+#define dsWSize ( 68)(%rdi)
+#define dsWMask ( 76)(%rdi)
+#define dsWindow ( 80)(%rdi)
+#define dsPrev ( 96)(%rdi)
+#define dsMatchLen (144)(%rdi)
+#define dsPrevMatch (148)(%rdi)
+#define dsStrStart (156)(%rdi)
+#define dsMatchStart (160)(%rdi)
+#define dsLookahead (164)(%rdi)
+#define dsPrevLen (168)(%rdi)
+#define dsMaxChainLen (172)(%rdi)
+#define dsGoodMatch (188)(%rdi)
+#define dsNiceMatch (192)(%rdi)
+
+#else
+
+#ifndef STRUCT_OFFSET
+# define STRUCT_OFFSET (0)
+#endif
+
+
+#define dsWSize ( 56 + STRUCT_OFFSET)(%rdi)
+#define dsWMask ( 64 + STRUCT_OFFSET)(%rdi)
+#define dsWindow ( 72 + STRUCT_OFFSET)(%rdi)
+#define dsPrev ( 88 + STRUCT_OFFSET)(%rdi)
+#define dsMatchLen (136 + STRUCT_OFFSET)(%rdi)
+#define dsPrevMatch (140 + STRUCT_OFFSET)(%rdi)
+#define dsStrStart (148 + STRUCT_OFFSET)(%rdi)
+#define dsMatchStart (152 + STRUCT_OFFSET)(%rdi)
+#define dsLookahead (156 + STRUCT_OFFSET)(%rdi)
+#define dsPrevLen (160 + STRUCT_OFFSET)(%rdi)
+#define dsMaxChainLen (164 + STRUCT_OFFSET)(%rdi)
+#define dsGoodMatch (180 + STRUCT_OFFSET)(%rdi)
+#define dsNiceMatch (184 + STRUCT_OFFSET)(%rdi)
+
+#endif
+
+
+
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+/*
+ * Retrieve the function arguments. %curmatch will hold cur_match
+ * throughout the entire function (passed via rsi on amd64).
+ * rdi will hold the pointer to the deflate_state (first arg on amd64)
+ */
+ mov %rsi, save_rsi
+ mov %rbx, save_rbx
+ mov %r12, save_r12
+ mov %r13, save_r13
+ mov %r14, save_r14
+ mov %r15, save_r15
+
+/* uInt wmask = s->w_mask; */
+/* unsigned chain_length = s->max_chain_length; */
+/* if (s->prev_length >= s->good_match) { */
+/* chain_length >>= 2; */
+/* } */
+
+ movl dsPrevLen, %eax
+ movl dsGoodMatch, %ebx
+ cmpl %ebx, %eax
+ movl dsWMask, %eax
+ movl dsMaxChainLen, %chainlenwmask
+ jl LastMatchGood
+ shrl $2, %chainlenwmask
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can */
+/* use the sign flag instead of the zero flag for the exit test. */
+/* It is then shifted into the high word, to make room for the wmask */
+/* value, which it will always accompany. */
+
+ decl %chainlenwmask
+ shll $16, %chainlenwmask
+ orl %eax, %chainlenwmask
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
+
+ movl dsNiceMatch, %eax
+ movl dsLookahead, %ebx
+ cmpl %eax, %ebx
+ jl LookaheadLess
+ movl %eax, %ebx
+LookaheadLess: movl %ebx, %nicematch
+
+/* register Bytef *scan = s->window + s->strstart; */
+
+ mov dsWindow, %window
+ movl dsStrStart, %limitd
+ lea (%limit, %window), %scan
+
+/* Determine how many bytes the scan ptr is off from being */
+/* dword-aligned. */
+
+ mov %scan, %scanalign
+ negl %scanalignd
+ andl $3, %scanalignd
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
+/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
+
+ movl dsWSize, %eax
+ subl $MIN_LOOKAHEAD, %eax
+ xorl %ecx, %ecx
+ subl %eax, %limitd
+ cmovng %ecx, %limitd
+
+/* int best_len = s->prev_length; */
+
+ movl dsPrevLen, %bestlend
+
+/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory. */
+
+ lea (%window, %bestlen), %windowbestlen
+ mov %windowbestlen, _windowbestlen
+
+/* register ush scan_start = *(ushf*)scan; */
+/* register ush scan_end = *(ushf*)(scan+best_len-1); */
+/* Posf *prev = s->prev; */
+
+ movzwl (%scan), %scanstart
+ movzwl -1(%scan, %bestlen), %scanend
+ mov dsPrev, %prev
+
+/* Jump into the main loop. */
+
+ movl %chainlenwmask, _chainlenwmask
+ jmp LoopEntry
+
+.balign 16
+
+/* do {
+ * match = s->window + cur_match;
+ * if (*(ushf*)(match+best_len-1) != scan_end ||
+ * *(ushf*)match != scan_start) continue;
+ * [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ * && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ */
+LookupLoop:
+ andl %chainlenwmask, %curmatchd
+ movzwl (%prev, %curmatch, 2), %curmatchd
+ cmpl %limitd, %curmatchd
+ jbe LeaveNow
+ subl $0x00010000, %chainlenwmask
+ js LeaveNow
+LoopEntry: cmpw -1(%windowbestlen, %curmatch), %scanendw
+ jne LookupLoop
+ cmpw %scanstartw, (%window, %curmatch)
+ jne LookupLoop
+
+/* Store the current value of chainlen. */
+ movl %chainlenwmask, _chainlenwmask
+
+/* %scan is the string under scrutiny, and %prev to the string we */
+/* are hoping to match it up with. In actuality, %esi and %edi are */
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
+/* initialized to -(MAX_MATCH_8 - scanalign). */
+
+ mov $(-MAX_MATCH_8), %rdx
+ lea (%curmatch, %window), %windowbestlen
+ lea MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
+ lea MAX_MATCH_8(%scan, %scanalign), %prev
+
+/* the prefetching below makes very little difference... */
+ prefetcht1 (%windowbestlen, %rdx)
+ prefetcht1 (%prev, %rdx)
+
+/*
+ * Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %rdx so that it is offset to the exact byte that mismatched.
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance -- unrolling it, for example, makes no difference.
+ */
+
+#undef USE_SSE /* works, but is 6-7% slower, than non-SSE... */
+
+LoopCmps:
+#ifdef USE_SSE
+ /* Preload the SSE registers */
+ movdqu (%windowbestlen, %rdx), %xmm1
+ movdqu (%prev, %rdx), %xmm2
+ pcmpeqb %xmm2, %xmm1
+ movdqu 16(%windowbestlen, %rdx), %xmm3
+ movdqu 16(%prev, %rdx), %xmm4
+ pcmpeqb %xmm4, %xmm3
+ movdqu 32(%windowbestlen, %rdx), %xmm5
+ movdqu 32(%prev, %rdx), %xmm6
+ pcmpeqb %xmm6, %xmm5
+ movdqu 48(%windowbestlen, %rdx), %xmm7
+ movdqu 48(%prev, %rdx), %xmm8
+ pcmpeqb %xmm8, %xmm7
+
+ /* Check the comparisions' results */
+ pmovmskb %xmm1, %rax
+ notw %ax
+ bsfw %ax, %ax
+ jnz LeaveLoopCmps
+
+ /* this is the only iteration of the loop with a possibility of having
+ incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40
+ and (0x40*4)+8=0x108 */
+ add $8, %rdx
+ jz LenMaximum
+ add $8, %rdx
+
+
+ pmovmskb %xmm3, %rax
+ notw %ax
+ bsfw %ax, %ax
+ jnz LeaveLoopCmps
+
+
+ add $16, %rdx
+
+
+ pmovmskb %xmm5, %rax
+ notw %ax
+ bsfw %ax, %ax
+ jnz LeaveLoopCmps
+
+ add $16, %rdx
+
+
+ pmovmskb %xmm7, %rax
+ notw %ax
+ bsfw %ax, %ax
+ jnz LeaveLoopCmps
+
+ add $16, %rdx
+
+ jmp LoopCmps
+LeaveLoopCmps: add %rax, %rdx
+#else
+ mov (%windowbestlen, %rdx), %rax
+ xor (%prev, %rdx), %rax
+ jnz LeaveLoopCmps
+
+ mov 8(%windowbestlen, %rdx), %rax
+ xor 8(%prev, %rdx), %rax
+ jnz LeaveLoopCmps8
+
+ mov 16(%windowbestlen, %rdx), %rax
+ xor 16(%prev, %rdx), %rax
+ jnz LeaveLoopCmps16
+
+ add $24, %rdx
+ jnz LoopCmps
+ jmp LenMaximum
+# if 0
+/*
+ * This three-liner is tantalizingly simple, but bsf is a slow instruction,
+ * and the complicated alternative down below is quite a bit faster. Sad...
+ */
+
+LeaveLoopCmps: bsf %rax, %rax /* find the first non-zero bit */
+ shrl $3, %eax /* divide by 8 to get the byte */
+ add %rax, %rdx
+# else
+LeaveLoopCmps16:
+ add $8, %rdx
+LeaveLoopCmps8:
+ add $8, %rdx
+LeaveLoopCmps: testl $0xFFFFFFFF, %eax /* Check the first 4 bytes */
+ jnz Check16
+ add $4, %rdx
+ shr $32, %rax
+Check16: testw $0xFFFF, %ax
+ jnz LenLower
+ add $2, %rdx
+ shrl $16, %eax
+LenLower: subb $1, %al
+ adc $0, %rdx
+# endif
+#endif
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH, */
+/* then automatically accept it as the best possible match and leave. */
+
+ lea (%prev, %rdx), %rax
+ sub %scan, %rax
+ cmpl $MAX_MATCH, %eax
+ jge LenMaximum
+
+/* If the length of the match is not longer than the best match we */
+/* have so far, then forget it and return to the lookup loop. */
+
+ cmpl %bestlend, %eax
+ jg LongerMatch
+ mov _windowbestlen, %windowbestlen
+ mov dsPrev, %prev
+ movl _chainlenwmask, %edx
+ jmp LookupLoop
+
+/* s->match_start = cur_match; */
+/* best_len = len; */
+/* if (len >= nice_match) break; */
+/* scan_end = *(ushf*)(scan+best_len-1); */
+
+LongerMatch:
+ movl %eax, %bestlend
+ movl %curmatchd, dsMatchStart
+ cmpl %nicematch, %eax
+ jge LeaveNow
+
+ lea (%window, %bestlen), %windowbestlen
+ mov %windowbestlen, _windowbestlen
+
+ movzwl -1(%scan, %rax), %scanend
+ mov dsPrev, %prev
+ movl _chainlenwmask, %chainlenwmask
+ jmp LookupLoop
+
+/* Accept the current string, with the maximum possible length. */
+
+LenMaximum:
+ movl $MAX_MATCH, %bestlend
+ movl %curmatchd, dsMatchStart
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
+/* return s->lookahead; */
+
+LeaveNow:
+ movl dsLookahead, %eax
+ cmpl %eax, %bestlend
+ cmovngl %bestlend, %eax
+LookaheadRet:
+
+/* Restore the registers and return from whence we came. */
+
+ mov save_rsi, %rsi
+ mov save_rbx, %rbx
+ mov save_r12, %r12
+ mov save_r13, %r13
+ mov save_r14, %r14
+ mov save_r15, %r15
+
+ ret
+
+match_init: ret
--- /dev/null
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o
+
+
+Update:
+
+I've been ignoring these assembly routines for years, believing that
+gcc's generated code had caught up with it sometime around gcc 2.95
+and the major rearchitecting of the Pentium 4. However, I recently
+learned that, despite what I believed, this code still has some life
+in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
+faster than the code produced by gcc 4.1.
+
+In acknowledgement of its continuing usefulness, I've altered the
+license to match that of the rest of zlib. Share and Enjoy!
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 2007
--- /dev/null
+/* match.S -- x86 assembly version of the zlib longest_match() function.
+ * Optimized for the Intel 686 chips (PPro and later).
+ *
+ * Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the author be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ * claim that you wrote the original software. If you use this software
+ * in a product, an acknowledgment in the product documentation would be
+ * appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ * misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ */
+
+#ifndef NO_UNDERLINE
+#define match_init _match_init
+#define longest_match _longest_match
+#endif
+
+#define MAX_MATCH (258)
+#define MIN_MATCH (3)
+#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
+#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define chainlenwmask 0 /* high word: current chain len */
+ /* low word: s->wmask */
+#define window 4 /* local copy of s->window */
+#define windowbestlen 8 /* s->window + bestlen */
+#define scanstart 16 /* first two bytes of string */
+#define scanend 12 /* last two bytes of string */
+#define scanalign 20 /* dword-misalignment of string */
+#define nicematch 24 /* a good enough match size */
+#define bestlen 28 /* size of best match so far */
+#define scan 32 /* ptr to string wanting match */
+
+#define LocalVarsSize (36)
+/* saved ebx 36 */
+/* saved edi 40 */
+/* saved esi 44 */
+/* saved ebp 48 */
+/* return address 52 */
+#define deflatestate 56 /* the function arguments */
+#define curmatch 60
+
+/* All the +zlib1222add offsets are due to the addition of fields
+ * in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+ */
+
+#define zlib1222add (8)
+
+#define dsWSize (36+zlib1222add)
+#define dsWMask (44+zlib1222add)
+#define dsWindow (48+zlib1222add)
+#define dsPrev (56+zlib1222add)
+#define dsMatchLen (88+zlib1222add)
+#define dsPrevMatch (92+zlib1222add)
+#define dsStrStart (100+zlib1222add)
+#define dsMatchStart (104+zlib1222add)
+#define dsLookahead (108+zlib1222add)
+#define dsPrevLen (112+zlib1222add)
+#define dsMaxChainLen (116+zlib1222add)
+#define dsGoodMatch (132+zlib1222add)
+#define dsNiceMatch (136+zlib1222add)
+
+
+.file "match.S"
+
+.globl match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections .debug_frame
+
+longest_match:
+
+.cfi_startproc
+/* Save registers that the compiler may be using, and adjust %esp to */
+/* make room for our stack frame. */
+
+ pushl %ebp
+ .cfi_def_cfa_offset 8
+ .cfi_offset ebp, -8
+ pushl %edi
+ .cfi_def_cfa_offset 12
+ pushl %esi
+ .cfi_def_cfa_offset 16
+ pushl %ebx
+ .cfi_def_cfa_offset 20
+ subl $LocalVarsSize, %esp
+ .cfi_def_cfa_offset LocalVarsSize+20
+
+/* Retrieve the function arguments. %ecx will hold cur_match */
+/* throughout the entire function. %edx will hold the pointer to the */
+/* deflate_state structure during the function's setup (before */
+/* entering the main loop). */
+
+ movl deflatestate(%esp), %edx
+ movl curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask; */
+/* unsigned chain_length = s->max_chain_length; */
+/* if (s->prev_length >= s->good_match) { */
+/* chain_length >>= 2; */
+/* } */
+
+ movl dsPrevLen(%edx), %eax
+ movl dsGoodMatch(%edx), %ebx
+ cmpl %ebx, %eax
+ movl dsWMask(%edx), %eax
+ movl dsMaxChainLen(%edx), %ebx
+ jl LastMatchGood
+ shrl $2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can */
+/* use the sign flag instead of the zero flag for the exit test. */
+/* It is then shifted into the high word, to make room for the wmask */
+/* value, which it will always accompany. */
+
+ decl %ebx
+ shll $16, %ebx
+ orl %eax, %ebx
+ movl %ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
+
+ movl dsNiceMatch(%edx), %eax
+ movl dsLookahead(%edx), %ebx
+ cmpl %eax, %ebx
+ jl LookaheadLess
+ movl %eax, %ebx
+LookaheadLess: movl %ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart; */
+
+ movl dsWindow(%edx), %esi
+ movl %esi, window(%esp)
+ movl dsStrStart(%edx), %ebp
+ lea (%esi,%ebp), %edi
+ movl %edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being */
+/* dword-aligned. */
+
+ movl %edi, %eax
+ negl %eax
+ andl $3, %eax
+ movl %eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
+/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
+
+ movl dsWSize(%edx), %eax
+ subl $MIN_LOOKAHEAD, %eax
+ subl %eax, %ebp
+ jg LimitPositive
+ xorl %ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length; */
+
+ movl dsPrevLen(%edx), %eax
+ movl %eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
+
+ addl %eax, %esi
+ movl %esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan; */
+/* register ush scan_end = *(ushf*)(scan+best_len-1); */
+/* Posf *prev = s->prev; */
+
+ movzwl (%edi), %ebx
+ movl %ebx, scanstart(%esp)
+ movzwl -1(%edi,%eax), %ebx
+ movl %ebx, scanend(%esp)
+ movl dsPrev(%edx), %edi
+
+/* Jump into the main loop. */
+
+ movl chainlenwmask(%esp), %edx
+ jmp LoopEntry
+
+.balign 16
+
+/* do {
+ * match = s->window + cur_match;
+ * if (*(ushf*)(match+best_len-1) != scan_end ||
+ * *(ushf*)match != scan_start) continue;
+ * [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ * && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+ andl %edx, %ecx
+ movzwl (%edi,%ecx,2), %ecx
+ cmpl %ebp, %ecx
+ jbe LeaveNow
+ subl $0x00010000, %edx
+ js LeaveNow
+LoopEntry: movzwl -1(%esi,%ecx), %eax
+ cmpl %ebx, %eax
+ jnz LookupLoop
+ movl window(%esp), %eax
+ movzwl (%eax,%ecx), %eax
+ cmpl scanstart(%esp), %eax
+ jnz LookupLoop
+
+/* Store the current value of chainlen. */
+
+ movl %edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we */
+/* are hoping to match it up with. In actuality, %esi and %edi are */
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
+/* initialized to -(MAX_MATCH_8 - scanalign). */
+
+ movl window(%esp), %esi
+ movl scan(%esp), %edi
+ addl %ecx, %esi
+ movl scanalign(%esp), %eax
+ movl $(-MAX_MATCH_8), %edx
+ lea MAX_MATCH_8(%edi,%eax), %edi
+ lea MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+ movl (%esi,%edx), %eax
+ xorl (%edi,%edx), %eax
+ jnz LeaveLoopCmps
+ movl 4(%esi,%edx), %eax
+ xorl 4(%edi,%edx), %eax
+ jnz LeaveLoopCmps4
+ addl $8, %edx
+ jnz LoopCmps
+ jmp LenMaximum
+LeaveLoopCmps4: addl $4, %edx
+LeaveLoopCmps: testl $0x0000FFFF, %eax
+ jnz LenLower
+ addl $2, %edx
+ shrl $16, %eax
+LenLower: subb $1, %al
+ adcl $0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH, */
+/* then automatically accept it as the best possible match and leave. */
+
+ lea (%edi,%edx), %eax
+ movl scan(%esp), %edi
+ subl %edi, %eax
+ cmpl $MAX_MATCH, %eax
+ jge LenMaximum
+
+/* If the length of the match is not longer than the best match we */
+/* have so far, then forget it and return to the lookup loop. */
+
+ movl deflatestate(%esp), %edx
+ movl bestlen(%esp), %ebx
+ cmpl %ebx, %eax
+ jg LongerMatch
+ movl windowbestlen(%esp), %esi
+ movl dsPrev(%edx), %edi
+ movl scanend(%esp), %ebx
+ movl chainlenwmask(%esp), %edx
+ jmp LookupLoop
+
+/* s->match_start = cur_match; */
+/* best_len = len; */
+/* if (len >= nice_match) break; */
+/* scan_end = *(ushf*)(scan+best_len-1); */
+
+LongerMatch: movl nicematch(%esp), %ebx
+ movl %eax, bestlen(%esp)
+ movl %ecx, dsMatchStart(%edx)
+ cmpl %ebx, %eax
+ jge LeaveNow
+ movl window(%esp), %esi
+ addl %eax, %esi
+ movl %esi, windowbestlen(%esp)
+ movzwl -1(%edi,%eax), %ebx
+ movl dsPrev(%edx), %edi
+ movl %ebx, scanend(%esp)
+ movl chainlenwmask(%esp), %edx
+ jmp LookupLoop
+
+/* Accept the current string, with the maximum possible length. */
+
+LenMaximum: movl deflatestate(%esp), %edx
+ movl $MAX_MATCH, bestlen(%esp)
+ movl %ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
+/* return s->lookahead; */
+
+LeaveNow:
+ movl deflatestate(%esp), %edx
+ movl bestlen(%esp), %ebx
+ movl dsLookahead(%edx), %eax
+ cmpl %eax, %ebx
+ jg LookaheadRet
+ movl %ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came. */
+
+ addl $LocalVarsSize, %esp
+ .cfi_def_cfa_offset 20
+ popl %ebx
+ .cfi_def_cfa_offset 16
+ popl %esi
+ .cfi_def_cfa_offset 12
+ popl %edi
+ .cfi_def_cfa_offset 8
+ popl %ebp
+ .cfi_def_cfa_offset 4
+.cfi_endproc
+match_init: ret
--- /dev/null
+blast: blast.c blast.h
+ cc -DTEST -o blast blast.c
+
+test: blast
+ blast < test.pk | cmp - test.txt
+
+clean:
+ rm -f blast blast.o
--- /dev/null
+Read blast.h for purpose and usage.
+
+Mark Adler
+madler@alumni.caltech.edu
--- /dev/null
+/* blast.c
+ * Copyright (C) 2003, 2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in blast.h
+ * version 1.2, 24 Oct 2012
+ *
+ * blast.c decompresses data compressed by the PKWare Compression Library.
+ * This function provides functionality similar to the explode() function of
+ * the PKWare library, hence the name "blast".
+ *
+ * This decompressor is based on the excellent format description provided by
+ * Ben Rudiak-Gould in comp.compression on August 13, 2001. Interestingly, the
+ * example Ben provided in the post is incorrect. The distance 110001 should
+ * instead be 111000. When corrected, the example byte stream becomes:
+ *
+ * 00 04 82 24 25 8f 80 7f
+ *
+ * which decompresses to "AIAIAIAIAIAIA" (without the quotes).
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 12 Feb 2003 - First version
+ * 1.1 16 Feb 2003 - Fixed distance check for > 4 GB uncompressed data
+ * 1.2 24 Oct 2012 - Add note about using binary mode in stdio
+ * - Fix comparisons of differently signed integers
+ */
+
+#include <setjmp.h> /* for setjmp(), longjmp(), and jmp_buf */
+#include "blast.h" /* prototype for blast() */
+
+#define local static /* for local function definitions */
+#define MAXBITS 13 /* maximum code length */
+#define MAXWIN 4096 /* maximum window size */
+
+/* input and output state */
+struct state {
+ /* input state */
+ blast_in infun; /* input function provided by user */
+ void *inhow; /* opaque information passed to infun() */
+ unsigned char *in; /* next input location */
+ unsigned left; /* available input at in */
+ int bitbuf; /* bit buffer */
+ int bitcnt; /* number of bits in bit buffer */
+
+ /* input limit error return state for bits() and decode() */
+ jmp_buf env;
+
+ /* output state */
+ blast_out outfun; /* output function provided by user */
+ void *outhow; /* opaque information passed to outfun() */
+ unsigned next; /* index of next write location in out[] */
+ int first; /* true to check distances (for first 4K) */
+ unsigned char out[MAXWIN]; /* output buffer and sliding window */
+};
+
+/*
+ * Return need bits from the input stream. This always leaves less than
+ * eight bits in the buffer. bits() works properly for need == 0.
+ *
+ * Format notes:
+ *
+ * - Bits are stored in bytes from the least significant bit to the most
+ * significant bit. Therefore bits are dropped from the bottom of the bit
+ * buffer, using shift right, and new bytes are appended to the top of the
+ * bit buffer, using shift left.
+ */
+local int bits(struct state *s, int need)
+{
+ int val; /* bit accumulator */
+
+ /* load at least need bits into val */
+ val = s->bitbuf;
+ while (s->bitcnt < need) {
+ if (s->left == 0) {
+ s->left = s->infun(s->inhow, &(s->in));
+ if (s->left == 0) longjmp(s->env, 1); /* out of input */
+ }
+ val |= (int)(*(s->in)++) << s->bitcnt; /* load eight bits */
+ s->left--;
+ s->bitcnt += 8;
+ }
+
+ /* drop need bits and update buffer, always zero to seven bits left */
+ s->bitbuf = val >> need;
+ s->bitcnt -= need;
+
+ /* return need bits, zeroing the bits above that */
+ return val & ((1 << need) - 1);
+}
+
+/*
+ * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of
+ * each length, which for a canonical code are stepped through in order.
+ * symbol[] are the symbol values in canonical order, where the number of
+ * entries is the sum of the counts in count[]. The decoding process can be
+ * seen in the function decode() below.
+ */
+struct huffman {
+ short *count; /* number of symbols of each length */
+ short *symbol; /* canonically ordered symbols */
+};
+
+/*
+ * Decode a code from the stream s using huffman table h. Return the symbol or
+ * a negative value if there is an error. If all of the lengths are zero, i.e.
+ * an empty code, or if the code is incomplete and an invalid code is received,
+ * then -9 is returned after reading MAXBITS bits.
+ *
+ * Format notes:
+ *
+ * - The codes as stored in the compressed data are bit-reversed relative to
+ * a simple integer ordering of codes of the same lengths. Hence below the
+ * bits are pulled from the compressed data one at a time and used to
+ * build the code value reversed from what is in the stream in order to
+ * permit simple integer comparisons for decoding.
+ *
+ * - The first code for the shortest length is all ones. Subsequent codes of
+ * the same length are simply integer decrements of the previous code. When
+ * moving up a length, a one bit is appended to the code. For a complete
+ * code, the last code of the longest length will be all zeros. To support
+ * this ordering, the bits pulled during decoding are inverted to apply the
+ * more "natural" ordering starting with all zeros and incrementing.
+ */
+local int decode(struct state *s, struct huffman *h)
+{
+ int len; /* current number of bits in code */
+ int code; /* len bits being decoded */
+ int first; /* first code of length len */
+ int count; /* number of codes of length len */
+ int index; /* index of first code of length len in symbol table */
+ int bitbuf; /* bits from stream */
+ int left; /* bits left in next or left to process */
+ short *next; /* next number of codes */
+
+ bitbuf = s->bitbuf;
+ left = s->bitcnt;
+ code = first = index = 0;
+ len = 1;
+ next = h->count + 1;
+ while (1) {
+ while (left--) {
+ code |= (bitbuf & 1) ^ 1; /* invert code */
+ bitbuf >>= 1;
+ count = *next++;
+ if (code < first + count) { /* if length len, return symbol */
+ s->bitbuf = bitbuf;
+ s->bitcnt = (s->bitcnt - len) & 7;
+ return h->symbol[index + (code - first)];
+ }
+ index += count; /* else update for next length */
+ first += count;
+ first <<= 1;
+ code <<= 1;
+ len++;
+ }
+ left = (MAXBITS+1) - len;
+ if (left == 0) break;
+ if (s->left == 0) {
+ s->left = s->infun(s->inhow, &(s->in));
+ if (s->left == 0) longjmp(s->env, 1); /* out of input */
+ }
+ bitbuf = *(s->in)++;
+ s->left--;
+ if (left > 8) left = 8;
+ }
+ return -9; /* ran out of codes */
+}
+
+/*
+ * Given a list of repeated code lengths rep[0..n-1], where each byte is a
+ * count (high four bits + 1) and a code length (low four bits), generate the
+ * list of code lengths. This compaction reduces the size of the object code.
+ * Then given the list of code lengths length[0..n-1] representing a canonical
+ * Huffman code for n symbols, construct the tables required to decode those
+ * codes. Those tables are the number of codes of each length, and the symbols
+ * sorted by length, retaining their original order within each length. The
+ * return value is zero for a complete code set, negative for an over-
+ * subscribed code set, and positive for an incomplete code set. The tables
+ * can be used if the return value is zero or positive, but they cannot be used
+ * if the return value is negative. If the return value is zero, it is not
+ * possible for decode() using that table to return an error--any stream of
+ * enough bits will resolve to a symbol. If the return value is positive, then
+ * it is possible for decode() using that table to return an error for received
+ * codes past the end of the incomplete lengths.
+ */
+local int construct(struct huffman *h, const unsigned char *rep, int n)
+{
+ int symbol; /* current symbol when stepping through length[] */
+ int len; /* current length when stepping through h->count[] */
+ int left; /* number of possible codes left of current length */
+ short offs[MAXBITS+1]; /* offsets in symbol table for each length */
+ short length[256]; /* code lengths */
+
+ /* convert compact repeat counts into symbol bit length list */
+ symbol = 0;
+ do {
+ len = *rep++;
+ left = (len >> 4) + 1;
+ len &= 15;
+ do {
+ length[symbol++] = len;
+ } while (--left);
+ } while (--n);
+ n = symbol;
+
+ /* count number of codes of each length */
+ for (len = 0; len <= MAXBITS; len++)
+ h->count[len] = 0;
+ for (symbol = 0; symbol < n; symbol++)
+ (h->count[length[symbol]])++; /* assumes lengths are within bounds */
+ if (h->count[0] == n) /* no codes! */
+ return 0; /* complete, but decode() will fail */
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1; /* one possible code of zero length */
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1; /* one more bit, double codes left */
+ left -= h->count[len]; /* deduct count from possible codes */
+ if (left < 0) return left; /* over-subscribed--return negative */
+ } /* left > 0 means incomplete */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + h->count[len];
+
+ /*
+ * put symbols in table sorted by length, by symbol order within each
+ * length
+ */
+ for (symbol = 0; symbol < n; symbol++)
+ if (length[symbol] != 0)
+ h->symbol[offs[length[symbol]]++] = symbol;
+
+ /* return zero for complete set, positive for incomplete set */
+ return left;
+}
+
+/*
+ * Decode PKWare Compression Library stream.
+ *
+ * Format notes:
+ *
+ * - First byte is 0 if literals are uncoded or 1 if they are coded. Second
+ * byte is 4, 5, or 6 for the number of extra bits in the distance code.
+ * This is the base-2 logarithm of the dictionary size minus six.
+ *
+ * - Compressed data is a combination of literals and length/distance pairs
+ * terminated by an end code. Literals are either Huffman coded or
+ * uncoded bytes. A length/distance pair is a coded length followed by a
+ * coded distance to represent a string that occurs earlier in the
+ * uncompressed data that occurs again at the current location.
+ *
+ * - A bit preceding a literal or length/distance pair indicates which comes
+ * next, 0 for literals, 1 for length/distance.
+ *
+ * - If literals are uncoded, then the next eight bits are the literal, in the
+ * normal bit order in th stream, i.e. no bit-reversal is needed. Similarly,
+ * no bit reversal is needed for either the length extra bits or the distance
+ * extra bits.
+ *
+ * - Literal bytes are simply written to the output. A length/distance pair is
+ * an instruction to copy previously uncompressed bytes to the output. The
+ * copy is from distance bytes back in the output stream, copying for length
+ * bytes.
+ *
+ * - Distances pointing before the beginning of the output data are not
+ * permitted.
+ *
+ * - Overlapped copies, where the length is greater than the distance, are
+ * allowed and common. For example, a distance of one and a length of 518
+ * simply copies the last byte 518 times. A distance of four and a length of
+ * twelve copies the last four bytes three times. A simple forward copy
+ * ignoring whether the length is greater than the distance or not implements
+ * this correctly.
+ */
+local int decomp(struct state *s)
+{
+ int lit; /* true if literals are coded */
+ int dict; /* log2(dictionary size) - 6 */
+ int symbol; /* decoded symbol, extra bits for distance */
+ int len; /* length for copy */
+ unsigned dist; /* distance for copy */
+ int copy; /* copy counter */
+ unsigned char *from, *to; /* copy pointers */
+ static int virgin = 1; /* build tables once */
+ static short litcnt[MAXBITS+1], litsym[256]; /* litcode memory */
+ static short lencnt[MAXBITS+1], lensym[16]; /* lencode memory */
+ static short distcnt[MAXBITS+1], distsym[64]; /* distcode memory */
+ static struct huffman litcode = {litcnt, litsym}; /* length code */
+ static struct huffman lencode = {lencnt, lensym}; /* length code */
+ static struct huffman distcode = {distcnt, distsym};/* distance code */
+ /* bit lengths of literal codes */
+ static const unsigned char litlen[] = {
+ 11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8,
+ 9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5,
+ 7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12,
+ 8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27,
+ 44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45,
+ 44, 173};
+ /* bit lengths of length codes 0..15 */
+ static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23};
+ /* bit lengths of distance codes 0..63 */
+ static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248};
+ static const short base[16] = { /* base for length codes */
+ 3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264};
+ static const char extra[16] = { /* extra bits for length codes */
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8};
+
+ /* set up decoding tables (once--might not be thread-safe) */
+ if (virgin) {
+ construct(&litcode, litlen, sizeof(litlen));
+ construct(&lencode, lenlen, sizeof(lenlen));
+ construct(&distcode, distlen, sizeof(distlen));
+ virgin = 0;
+ }
+
+ /* read header */
+ lit = bits(s, 8);
+ if (lit > 1) return -1;
+ dict = bits(s, 8);
+ if (dict < 4 || dict > 6) return -2;
+
+ /* decode literals and length/distance pairs */
+ do {
+ if (bits(s, 1)) {
+ /* get length */
+ symbol = decode(s, &lencode);
+ len = base[symbol] + bits(s, extra[symbol]);
+ if (len == 519) break; /* end code */
+
+ /* get distance */
+ symbol = len == 2 ? 2 : dict;
+ dist = decode(s, &distcode) << symbol;
+ dist += bits(s, symbol);
+ dist++;
+ if (s->first && dist > s->next)
+ return -3; /* distance too far back */
+
+ /* copy length bytes from distance bytes back */
+ do {
+ to = s->out + s->next;
+ from = to - dist;
+ copy = MAXWIN;
+ if (s->next < dist) {
+ from += copy;
+ copy = dist;
+ }
+ copy -= s->next;
+ if (copy > len) copy = len;
+ len -= copy;
+ s->next += copy;
+ do {
+ *to++ = *from++;
+ } while (--copy);
+ if (s->next == MAXWIN) {
+ if (s->outfun(s->outhow, s->out, s->next)) return 1;
+ s->next = 0;
+ s->first = 0;
+ }
+ } while (len != 0);
+ }
+ else {
+ /* get literal and write it */
+ symbol = lit ? decode(s, &litcode) : bits(s, 8);
+ s->out[s->next++] = symbol;
+ if (s->next == MAXWIN) {
+ if (s->outfun(s->outhow, s->out, s->next)) return 1;
+ s->next = 0;
+ s->first = 0;
+ }
+ }
+ } while (1);
+ return 0;
+}
+
+/* See comments in blast.h */
+int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow)
+{
+ struct state s; /* input/output state */
+ int err; /* return value */
+
+ /* initialize input state */
+ s.infun = infun;
+ s.inhow = inhow;
+ s.left = 0;
+ s.bitbuf = 0;
+ s.bitcnt = 0;
+
+ /* initialize output state */
+ s.outfun = outfun;
+ s.outhow = outhow;
+ s.next = 0;
+ s.first = 1;
+
+ /* return if bits() or decode() tries to read past available input */
+ if (setjmp(s.env) != 0) /* if came back here via longjmp(), */
+ err = 2; /* then skip decomp(), return error */
+ else
+ err = decomp(&s); /* decompress */
+
+ /* write any leftover output and update the error code if needed */
+ if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0)
+ err = 1;
+ return err;
+}
+
+#ifdef TEST
+/* Example of how to use blast() */
+#include <stdio.h>
+#include <stdlib.h>
+
+#define CHUNK 16384
+
+local unsigned inf(void *how, unsigned char **buf)
+{
+ static unsigned char hold[CHUNK];
+
+ *buf = hold;
+ return fread(hold, 1, CHUNK, (FILE *)how);
+}
+
+local int outf(void *how, unsigned char *buf, unsigned len)
+{
+ return fwrite(buf, 1, len, (FILE *)how) != len;
+}
+
+/* Decompress a PKWare Compression Library stream from stdin to stdout */
+int main(void)
+{
+ int ret, n;
+
+ /* decompress to stdout */
+ ret = blast(inf, stdin, outf, stdout);
+ if (ret != 0) fprintf(stderr, "blast error: %d\n", ret);
+
+ /* see if there are any leftover bytes */
+ n = 0;
+ while (getchar() != EOF) n++;
+ if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n);
+
+ /* return blast() error code */
+ return ret;
+}
+#endif
--- /dev/null
+/* blast.h -- interface for blast.c
+ Copyright (C) 2003, 2012 Mark Adler
+ version 1.2, 24 Oct 2012
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler@alumni.caltech.edu
+ */
+
+
+/*
+ * blast() decompresses the PKWare Data Compression Library (DCL) compressed
+ * format. It provides the same functionality as the explode() function in
+ * that library. (Note: PKWare overused the "implode" verb, and the format
+ * used by their library implode() function is completely different and
+ * incompatible with the implode compression method supported by PKZIP.)
+ *
+ * The binary mode for stdio functions should be used to assure that the
+ * compressed data is not corrupted when read or written. For example:
+ * fopen(..., "rb") and fopen(..., "wb").
+ */
+
+
+typedef unsigned (*blast_in)(void *how, unsigned char **buf);
+typedef int (*blast_out)(void *how, unsigned char *buf, unsigned len);
+/* Definitions for input/output functions passed to blast(). See below for
+ * what the provided functions need to do.
+ */
+
+
+int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow);
+/* Decompress input to output using the provided infun() and outfun() calls.
+ * On success, the return value of blast() is zero. If there is an error in
+ * the source data, i.e. it is not in the proper format, then a negative value
+ * is returned. If there is not enough input available or there is not enough
+ * output space, then a positive error is returned.
+ *
+ * The input function is invoked: len = infun(how, &buf), where buf is set by
+ * infun() to point to the input buffer, and infun() returns the number of
+ * available bytes there. If infun() returns zero, then blast() returns with
+ * an input error. (blast() only asks for input if it needs it.) inhow is for
+ * use by the application to pass an input descriptor to infun(), if desired.
+ *
+ * The output function is invoked: err = outfun(how, buf, len), where the bytes
+ * to be written are buf[0..len-1]. If err is not zero, then blast() returns
+ * with an output error. outfun() is always called with len <= 4096. outhow
+ * is for use by the application to pass an output descriptor to outfun(), if
+ * desired.
+ *
+ * The return codes are:
+ *
+ * 2: ran out of input before completing decompression
+ * 1: output error before completing decompression
+ * 0: successful decompression
+ * -1: literal flag not zero or one
+ * -2: dictionary size not in 4..6
+ * -3: distance is too far back
+ *
+ * At the bottom of blast.c is an example program that uses blast() that can be
+ * compiled to produce a command-line decompression filter by defining TEST.
+ */
--- /dev/null
+AIAIAIAIAIAIA
\ No newline at end of file
--- /dev/null
+{*******************************************************}
+{ }
+{ Borland Delphi Supplemental Components }
+{ ZLIB Data Compression Interface Unit }
+{ }
+{ Copyright (c) 1997,99 Borland Corporation }
+{ }
+{*******************************************************}
+
+{ Updated for zlib 1.2.x by Cosmin Truta <cosmint@cs.ubbcluj.ro> }
+
+unit ZLib;
+
+interface
+
+uses SysUtils, Classes;
+
+type
+ TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+ TFree = procedure (AppData, Block: Pointer); cdecl;
+
+ // Internal structure. Ignore.
+ TZStreamRec = packed record
+ next_in: PChar; // next input byte
+ avail_in: Integer; // number of bytes available at next_in
+ total_in: Longint; // total nb of input bytes read so far
+
+ next_out: PChar; // next output byte should be put here
+ avail_out: Integer; // remaining free space at next_out
+ total_out: Longint; // total nb of bytes output so far
+
+ msg: PChar; // last error message, NULL if no error
+ internal: Pointer; // not visible by applications
+
+ zalloc: TAlloc; // used to allocate the internal state
+ zfree: TFree; // used to free the internal state
+ AppData: Pointer; // private data object passed to zalloc and zfree
+
+ data_type: Integer; // best guess about the data type: ascii or binary
+ adler: Longint; // adler32 value of the uncompressed data
+ reserved: Longint; // reserved for future use
+ end;
+
+ // Abstract ancestor class
+ TCustomZlibStream = class(TStream)
+ private
+ FStrm: TStream;
+ FStrmPos: Integer;
+ FOnProgress: TNotifyEvent;
+ FZRec: TZStreamRec;
+ FBuffer: array [Word] of Char;
+ protected
+ procedure Progress(Sender: TObject); dynamic;
+ property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+ constructor Create(Strm: TStream);
+ end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+ stores the compressed data to another stream.
+
+ TCompressionStream is write-only and strictly sequential. Reading from the
+ stream will raise an exception. Using Seek to move the stream pointer
+ will raise an exception.
+
+ Output data is cached internally, written to the output stream only when
+ the internal output buffer is full. All pending output data is flushed
+ when the stream is destroyed.
+
+ The Position property returns the number of uncompressed bytes of
+ data that have been written to the stream so far.
+
+ CompressionRate returns the on-the-fly percentage by which the original
+ data has been compressed: (1 - (CompressedBytes / UncompressedBytes)) * 100
+ If raw data size = 100 and compressed data size = 25, the CompressionRate
+ is 75%
+
+ The OnProgress event is called each time the output buffer is filled and
+ written to the output stream. This is useful for updating a progress
+ indicator when you are writing a large chunk of data to the compression
+ stream in a single call.}
+
+
+ TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+ TCompressionStream = class(TCustomZlibStream)
+ private
+ function GetCompressionRate: Single;
+ public
+ constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+ destructor Destroy; override;
+ function Read(var Buffer; Count: Longint): Longint; override;
+ function Write(const Buffer; Count: Longint): Longint; override;
+ function Seek(Offset: Longint; Origin: Word): Longint; override;
+ property CompressionRate: Single read GetCompressionRate;
+ property OnProgress;
+ end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+ Compressed data comes from a separate source stream. TDecompressionStream
+ is read-only and unidirectional; you can seek forward in the stream, but not
+ backwards. The special case of setting the stream position to zero is
+ allowed. Seeking forward decompresses data until the requested position in
+ the uncompressed data has been reached. Seeking backwards, seeking relative
+ to the end of the stream, requesting the size of the stream, and writing to
+ the stream will raise an exception.
+
+ The Position property returns the number of bytes of uncompressed data that
+ have been read from the stream so far.
+
+ The OnProgress event is called each time the internal input buffer of
+ compressed data is exhausted and the next block is read from the input stream.
+ This is useful for updating a progress indicator when you are reading a
+ large chunk of data from the decompression stream in a single call.}
+
+ TDecompressionStream = class(TCustomZlibStream)
+ public
+ constructor Create(Source: TStream);
+ destructor Destroy; override;
+ function Read(var Buffer; Count: Longint): Longint; override;
+ function Write(const Buffer; Count: Longint): Longint; override;
+ function Seek(Offset: Longint; Origin: Word): Longint; override;
+ property OnProgress;
+ end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+ In: InBuf = ptr to compressed data
+ InBytes = number of bytes in InBuf
+ Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+ OutBytes = number of bytes in OutBuf }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+ out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+ In: InBuf = ptr to compressed data
+ InBytes = number of bytes in InBuf
+ OutEstimate = zero, or est. size of the decompressed data
+ Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+ OutBytes = number of bytes in OutBuf }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+{ DecompressToUserBuf decompresses data, buffer to buffer, in one call.
+ In: InBuf = ptr to compressed data
+ InBytes = number of bytes in InBuf
+ Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
+ BufSize = number of bytes in OutBuf }
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+ const OutBuf: Pointer; BufSize: Integer);
+
+const
+ zlib_version = '1.2.8';
+
+type
+ EZlibError = class(Exception);
+ ECompressionError = class(EZlibError);
+ EDecompressionError = class(EZlibError);
+
+implementation
+
+uses ZLibConst;
+
+const
+ Z_NO_FLUSH = 0;
+ Z_PARTIAL_FLUSH = 1;
+ Z_SYNC_FLUSH = 2;
+ Z_FULL_FLUSH = 3;
+ Z_FINISH = 4;
+
+ Z_OK = 0;
+ Z_STREAM_END = 1;
+ Z_NEED_DICT = 2;
+ Z_ERRNO = (-1);
+ Z_STREAM_ERROR = (-2);
+ Z_DATA_ERROR = (-3);
+ Z_MEM_ERROR = (-4);
+ Z_BUF_ERROR = (-5);
+ Z_VERSION_ERROR = (-6);
+
+ Z_NO_COMPRESSION = 0;
+ Z_BEST_SPEED = 1;
+ Z_BEST_COMPRESSION = 9;
+ Z_DEFAULT_COMPRESSION = (-1);
+
+ Z_FILTERED = 1;
+ Z_HUFFMAN_ONLY = 2;
+ Z_RLE = 3;
+ Z_DEFAULT_STRATEGY = 0;
+
+ Z_BINARY = 0;
+ Z_ASCII = 1;
+ Z_UNKNOWN = 2;
+
+ Z_DEFLATED = 8;
+
+
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
+{$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
+
+procedure adler32; external;
+procedure compressBound; external;
+procedure crc32; external;
+procedure deflateInit2_; external;
+procedure deflateParams; external;
+
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+ Result := AllocMem(Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+ FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
+begin
+ FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
+begin
+ Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+ recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+ recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+begin
+// GetMem(Result, Items*Size);
+ Result := AllocMem(Items * Size);
+end;
+
+procedure zlibFreeMem(AppData, Block: Pointer); cdecl;
+begin
+ FreeMem(Block);
+end;
+
+{function zlibCheck(code: Integer): Integer;
+begin
+ Result := code;
+ if code < 0 then
+ raise EZlibError.Create('error'); //!!
+end;}
+
+function CCheck(code: Integer): Integer;
+begin
+ Result := code;
+ if code < 0 then
+ raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+ Result := code;
+ if code < 0 then
+ raise EDecompressionError.Create('error'); //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+ out OutBuf: Pointer; out OutBytes: Integer);
+var
+ strm: TZStreamRec;
+ P: Pointer;
+begin
+ FillChar(strm, sizeof(strm), 0);
+ strm.zalloc := zlibAllocMem;
+ strm.zfree := zlibFreeMem;
+ OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+ GetMem(OutBuf, OutBytes);
+ try
+ strm.next_in := InBuf;
+ strm.avail_in := InBytes;
+ strm.next_out := OutBuf;
+ strm.avail_out := OutBytes;
+ CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+ try
+ while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+ begin
+ P := OutBuf;
+ Inc(OutBytes, 256);
+ ReallocMem(OutBuf, OutBytes);
+ strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+ strm.avail_out := 256;
+ end;
+ finally
+ CCheck(deflateEnd(strm));
+ end;
+ ReallocMem(OutBuf, strm.total_out);
+ OutBytes := strm.total_out;
+ except
+ FreeMem(OutBuf);
+ raise
+ end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+ strm: TZStreamRec;
+ P: Pointer;
+ BufInc: Integer;
+begin
+ FillChar(strm, sizeof(strm), 0);
+ strm.zalloc := zlibAllocMem;
+ strm.zfree := zlibFreeMem;
+ BufInc := (InBytes + 255) and not 255;
+ if OutEstimate = 0 then
+ OutBytes := BufInc
+ else
+ OutBytes := OutEstimate;
+ GetMem(OutBuf, OutBytes);
+ try
+ strm.next_in := InBuf;
+ strm.avail_in := InBytes;
+ strm.next_out := OutBuf;
+ strm.avail_out := OutBytes;
+ DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+ try
+ while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
+ begin
+ P := OutBuf;
+ Inc(OutBytes, BufInc);
+ ReallocMem(OutBuf, OutBytes);
+ strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+ strm.avail_out := BufInc;
+ end;
+ finally
+ DCheck(inflateEnd(strm));
+ end;
+ ReallocMem(OutBuf, strm.total_out);
+ OutBytes := strm.total_out;
+ except
+ FreeMem(OutBuf);
+ raise
+ end;
+end;
+
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+ const OutBuf: Pointer; BufSize: Integer);
+var
+ strm: TZStreamRec;
+begin
+ FillChar(strm, sizeof(strm), 0);
+ strm.zalloc := zlibAllocMem;
+ strm.zfree := zlibFreeMem;
+ strm.next_in := InBuf;
+ strm.avail_in := InBytes;
+ strm.next_out := OutBuf;
+ strm.avail_out := BufSize;
+ DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+ try
+ if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then
+ raise EZlibError.CreateRes(@sTargetBufferTooSmall);
+ finally
+ DCheck(inflateEnd(strm));
+ end;
+end;
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+ inherited Create;
+ FStrm := Strm;
+ FStrmPos := Strm.Position;
+ FZRec.zalloc := zlibAllocMem;
+ FZRec.zfree := zlibFreeMem;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+ if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+ Dest: TStream);
+const
+ Levels: array [TCompressionLevel] of ShortInt =
+ (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+ inherited Create(Dest);
+ FZRec.next_out := FBuffer;
+ FZRec.avail_out := sizeof(FBuffer);
+ CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+ FZRec.next_in := nil;
+ FZRec.avail_in := 0;
+ try
+ if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+ while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+ and (FZRec.avail_out = 0) do
+ begin
+ FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+ FZRec.next_out := FBuffer;
+ FZRec.avail_out := sizeof(FBuffer);
+ end;
+ if FZRec.avail_out < sizeof(FBuffer) then
+ FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+ finally
+ deflateEnd(FZRec);
+ end;
+ inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+ raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+ FZRec.next_in := @Buffer;
+ FZRec.avail_in := Count;
+ if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+ while (FZRec.avail_in > 0) do
+ begin
+ CCheck(deflate(FZRec, 0));
+ if FZRec.avail_out = 0 then
+ begin
+ FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+ FZRec.next_out := FBuffer;
+ FZRec.avail_out := sizeof(FBuffer);
+ FStrmPos := FStrm.Position;
+ Progress(Self);
+ end;
+ end;
+ Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+ if (Offset = 0) and (Origin = soFromCurrent) then
+ Result := FZRec.total_in
+ else
+ raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+ if FZRec.total_in = 0 then
+ Result := 0
+ else
+ Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+ inherited Create(Source);
+ FZRec.next_in := FBuffer;
+ FZRec.avail_in := 0;
+ DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+ FStrm.Seek(-FZRec.avail_in, 1);
+ inflateEnd(FZRec);
+ inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+ FZRec.next_out := @Buffer;
+ FZRec.avail_out := Count;
+ if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+ while (FZRec.avail_out > 0) do
+ begin
+ if FZRec.avail_in = 0 then
+ begin
+ FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+ if FZRec.avail_in = 0 then
+ begin
+ Result := Count - FZRec.avail_out;
+ Exit;
+ end;
+ FZRec.next_in := FBuffer;
+ FStrmPos := FStrm.Position;
+ Progress(Self);
+ end;
+ CCheck(inflate(FZRec, 0));
+ end;
+ Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+ raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+ I: Integer;
+ Buf: array [0..4095] of Char;
+begin
+ if (Offset = 0) and (Origin = soFromBeginning) then
+ begin
+ DCheck(inflateReset(FZRec));
+ FZRec.next_in := FBuffer;
+ FZRec.avail_in := 0;
+ FStrm.Position := 0;
+ FStrmPos := 0;
+ end
+ else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+ ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+ begin
+ if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+ if Offset > 0 then
+ begin
+ for I := 1 to Offset div sizeof(Buf) do
+ ReadBuffer(Buf, sizeof(Buf));
+ ReadBuffer(Buf, Offset mod sizeof(Buf));
+ end;
+ end
+ else
+ raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+ Result := FZRec.total_out;
+end;
+
+
+end.
--- /dev/null
+unit ZLibConst;
+
+interface
+
+resourcestring
+ sTargetBufferTooSmall = 'ZLib error: target buffer may be too small';
+ sInvalidStreamOp = 'Invalid stream operation';
+
+implementation
+
+end.
--- /dev/null
+
+Overview
+========
+
+This directory contains an update to the ZLib interface unit,
+distributed by Borland as a Delphi supplemental component.
+
+The original ZLib unit is Copyright (c) 1997,99 Borland Corp.,
+and is based on zlib version 1.0.4. There are a series of bugs
+and security problems associated with that old zlib version, and
+we recommend the users to update their ZLib unit.
+
+
+Summary of modifications
+========================
+
+- Improved makefile, adapted to zlib version 1.2.1.
+
+- Some field types from TZStreamRec are changed from Integer to
+ Longint, for consistency with the zlib.h header, and for 64-bit
+ readiness.
+
+- The zlib_version constant is updated.
+
+- The new Z_RLE strategy has its corresponding symbolic constant.
+
+- The allocation and deallocation functions and function types
+ (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl,
+ and _malloc and _free are added as C RTL stubs. As a result,
+ the original C sources of zlib can be compiled out of the box,
+ and linked to the ZLib unit.
+
+
+Suggestions for improvements
+============================
+
+Currently, the ZLib unit provides only a limited wrapper around
+the zlib library, and much of the original zlib functionality is
+missing. Handling compressed file formats like ZIP/GZIP or PNG
+cannot be implemented without having this functionality.
+Applications that handle these formats are either using their own,
+duplicated code, or not using the ZLib unit at all.
+
+Here are a few suggestions:
+
+- Checksum class wrappers around adler32() and crc32(), similar
+ to the Java classes that implement the java.util.zip.Checksum
+ interface.
+
+- The ability to read and write raw deflate streams, without the
+ zlib stream header and trailer. Raw deflate streams are used
+ in the ZIP file format.
+
+- The ability to read and write gzip streams, used in the GZIP
+ file format, and normally produced by the gzip program.
+
+- The ability to select a different compression strategy, useful
+ to PNG and MNG image compression, and to multimedia compression
+ in general. Besides the compression level
+
+ TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+ which, in fact, could have used the 'z' prefix and avoided
+ TColor-like symbols
+
+ TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax);
+
+ there could be a compression strategy
+
+ TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle);
+
+- ZIP and GZIP stream handling via TStreams.
+
+
+--
+Cosmin Truta <cosmint@cs.ubbcluj.ro>
--- /dev/null
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+ -del *.obj
+ -del *.exe
+ -del *.lib
+ -del *.tds
+ -del zlib.bak
+ -del foo.gz
+
--- /dev/null
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+ <description>A .Net wrapper library around ZLib1.dll</description>
+
+ <property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+ <property name="build.root" value="bin" />
+
+ <property name="debug" value="true" />
+ <property name="nunit" value="true" />
+
+ <property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+ <property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+ <target name="clean" description="Remove all generated files">
+ <delete dir="${build.root}" failonerror="false" />
+ </target>
+
+ <target name="build" description="compiles the source code">
+
+ <mkdir dir="${build.folder}" />
+ <csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+ <references basedir="${nunit.location}">
+ <includes if="${nunit}" name="nunit.framework.dll" />
+ </references>
+ <sources>
+ <includes name="*.cs" />
+ <excludes name="UnitTests.cs" unless="${nunit}" />
+ </sources>
+ <arg value="/d:nunit" if="${nunit}" />
+ </csc>
+ </target>
+
+</project>
\ No newline at end of file
--- /dev/null
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+ ProjectSection(ProjectDependencies) = postProject
+ EndProjectSection
+EndProject
+Global
+ GlobalSection(SolutionConfiguration) = preSolution
+ Debug = Debug
+ Release = Release
+ EndGlobalSection
+ GlobalSection(ProjectConfiguration) = postSolution
+ {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+ {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+ {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+ {BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+ EndGlobalSection
+ GlobalSection(ExtensibilityGlobals) = postSolution
+ EndGlobalSection
+ GlobalSection(ExtensibilityAddIns) = postSolution
+ EndGlobalSection
+EndGlobal
--- /dev/null
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+//
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing.
+//
+// Notes:
+// (*) If no key is specified, the assembly is not signed.
+// (*) KeyName refers to a key that has been installed in the Crypto Service
+// Provider (CSP) on your machine. KeyFile refers to a file which contains
+// a key.
+// (*) If the KeyFile and the KeyName values are both specified, the
+// following processing occurs:
+// (1) If the KeyName can be found in the CSP, that key is used.
+// (2) If the KeyName does not exist and the KeyFile does exist, the key
+// in the KeyFile is installed into the CSP and used.
+// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+// When specifying the KeyFile, the location of the KeyFile should be
+// relative to the project output directory which is
+// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+// located in the project directory, you would specify the AssemblyKeyFile
+// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+// documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+ #region ChecksumGeneratorBase
+ /// <summary>
+ /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+ /// </summary>
+ /// <example></example>
+ public abstract class ChecksumGeneratorBase : ChecksumGenerator
+ {
+ /// <summary>
+ /// The value of the current checksum
+ /// </summary>
+ protected uint _current;
+
+ /// <summary>
+ /// Initializes a new instance of the checksum generator base - the current checksum is
+ /// set to zero
+ /// </summary>
+ public ChecksumGeneratorBase()
+ {
+ _current = 0;
+ }
+
+ /// <summary>
+ /// Initializes a new instance of the checksum generator basewith a specified value
+ /// </summary>
+ /// <param name="initialValue">The value to set the current checksum to</param>
+ public ChecksumGeneratorBase(uint initialValue)
+ {
+ _current = initialValue;
+ }
+
+ /// <summary>
+ /// Resets the current checksum to zero
+ /// </summary>
+ public void Reset() { _current = 0; }
+
+ /// <summary>
+ /// Gets the current checksum value
+ /// </summary>
+ public uint Value { get { return _current; } }
+
+ /// <summary>
+ /// Updates the current checksum with part of an array of bytes
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ /// <param name="offset">Where in <c>data</c> to start updating</param>
+ /// <param name="count">The number of bytes from <c>data</c> to use</param>
+ /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+ /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+ /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+ /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
+ /// This is therefore the only method a derived class has to implement</remarks>
+ public abstract void Update(byte[] data, int offset, int count);
+
+ /// <summary>
+ /// Updates the current checksum with an array of bytes.
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ public void Update(byte[] data)
+ {
+ Update(data, 0, data.Length);
+ }
+
+ /// <summary>
+ /// Updates the current checksum with the data from a string
+ /// </summary>
+ /// <param name="data">The string to update the checksum with</param>
+ /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+ public void Update(string data)
+ {
+ Update(Encoding.UTF8.GetBytes(data));
+ }
+
+ /// <summary>
+ /// Updates the current checksum with the data from a string, using a specific encoding
+ /// </summary>
+ /// <param name="data">The string to update the checksum with</param>
+ /// <param name="encoding">The encoding to use</param>
+ public void Update(string data, Encoding encoding)
+ {
+ Update(encoding.GetBytes(data));
+ }
+
+ }
+ #endregion
+
+ #region CRC32
+ /// <summary>
+ /// Implements a CRC32 checksum generator
+ /// </summary>
+ public sealed class CRC32Checksum : ChecksumGeneratorBase
+ {
+ #region DLL imports
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern uint crc32(uint crc, int data, uint length);
+
+ #endregion
+
+ /// <summary>
+ /// Initializes a new instance of the CRC32 checksum generator
+ /// </summary>
+ public CRC32Checksum() : base() {}
+
+ /// <summary>
+ /// Initializes a new instance of the CRC32 checksum generator with a specified value
+ /// </summary>
+ /// <param name="initialValue">The value to set the current checksum to</param>
+ public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+ /// <summary>
+ /// Updates the current checksum with part of an array of bytes
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ /// <param name="offset">Where in <c>data</c> to start updating</param>
+ /// <param name="count">The number of bytes from <c>data</c> to use</param>
+ /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+ /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+ /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+ public override void Update(byte[] data, int offset, int count)
+ {
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > data.Length) throw new ArgumentException();
+ GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+ try
+ {
+ _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+ }
+ finally
+ {
+ hData.Free();
+ }
+ }
+
+ }
+ #endregion
+
+ #region Adler
+ /// <summary>
+ /// Implements a checksum generator that computes the Adler checksum on data
+ /// </summary>
+ public sealed class AdlerChecksum : ChecksumGeneratorBase
+ {
+ #region DLL imports
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern uint adler32(uint adler, int data, uint length);
+
+ #endregion
+
+ /// <summary>
+ /// Initializes a new instance of the Adler checksum generator
+ /// </summary>
+ public AdlerChecksum() : base() {}
+
+ /// <summary>
+ /// Initializes a new instance of the Adler checksum generator with a specified value
+ /// </summary>
+ /// <param name="initialValue">The value to set the current checksum to</param>
+ public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+ /// <summary>
+ /// Updates the current checksum with part of an array of bytes
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ /// <param name="offset">Where in <c>data</c> to start updating</param>
+ /// <param name="count">The number of bytes from <c>data</c> to use</param>
+ /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+ /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+ /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+ public override void Update(byte[] data, int offset, int count)
+ {
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > data.Length) throw new ArgumentException();
+ GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+ try
+ {
+ _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+ }
+ finally
+ {
+ hData.Free();
+ }
+ }
+
+ }
+ #endregion
+
+}
\ No newline at end of file
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+ /// <summary>
+ /// This class implements a circular buffer
+ /// </summary>
+ internal class CircularBuffer
+ {
+ #region Private data
+ private int _capacity;
+ private int _head;
+ private int _tail;
+ private int _size;
+ private byte[] _buffer;
+ #endregion
+
+ public CircularBuffer(int capacity)
+ {
+ Debug.Assert( capacity > 0 );
+ _buffer = new byte[capacity];
+ _capacity = capacity;
+ _head = 0;
+ _tail = 0;
+ _size = 0;
+ }
+
+ public int Size { get { return _size; } }
+
+ public int Put(byte[] source, int offset, int count)
+ {
+ Debug.Assert( count > 0 );
+ int trueCount = Math.Min(count, _capacity - Size);
+ for (int i = 0; i < trueCount; ++i)
+ _buffer[(_tail+i) % _capacity] = source[offset+i];
+ _tail += trueCount;
+ _tail %= _capacity;
+ _size += trueCount;
+ return trueCount;
+ }
+
+ public bool Put(byte b)
+ {
+ if (Size == _capacity) // no room
+ return false;
+ _buffer[_tail++] = b;
+ _tail %= _capacity;
+ ++_size;
+ return true;
+ }
+
+ public int Get(byte[] destination, int offset, int count)
+ {
+ int trueCount = Math.Min(count,Size);
+ for (int i = 0; i < trueCount; ++i)
+ destination[offset + i] = _buffer[(_head+i) % _capacity];
+ _head += trueCount;
+ _head %= _capacity;
+ _size -= trueCount;
+ return trueCount;
+ }
+
+ public int Get()
+ {
+ if (Size == 0)
+ return -1;
+
+ int result = (int)_buffer[_head++ % _capacity];
+ --_size;
+ return result;
+ }
+
+ }
+}
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+ /// <summary>
+ /// Implements the common functionality needed for all <see cref="Codec"/>s
+ /// </summary>
+ public abstract class CodecBase : Codec, IDisposable
+ {
+
+ #region Data members
+
+ /// <summary>
+ /// Instance of the internal zlib buffer structure that is
+ /// passed to all functions in the zlib dll
+ /// </summary>
+ internal ZStream _ztream = new ZStream();
+
+ /// <summary>
+ /// True if the object instance has been disposed, false otherwise
+ /// </summary>
+ protected bool _isDisposed = false;
+
+ /// <summary>
+ /// The size of the internal buffers
+ /// </summary>
+ protected const int kBufferSize = 16384;
+
+ private byte[] _outBuffer = new byte[kBufferSize];
+ private byte[] _inBuffer = new byte[kBufferSize];
+
+ private GCHandle _hInput;
+ private GCHandle _hOutput;
+
+ private uint _checksum = 0;
+
+ #endregion
+
+ /// <summary>
+ /// Initializes a new instance of the <c>CodeBase</c> class.
+ /// </summary>
+ public CodecBase()
+ {
+ try
+ {
+ _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+ _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+ }
+ catch (Exception)
+ {
+ CleanUp(false);
+ throw;
+ }
+ }
+
+
+ #region Codec Members
+
+ /// <summary>
+ /// Occurs when more processed data are available.
+ /// </summary>
+ public event DataAvailableHandler DataAvailable;
+
+ /// <summary>
+ /// Fires the <see cref="DataAvailable"/> event
+ /// </summary>
+ protected void OnDataAvailable()
+ {
+ if (_ztream.total_out > 0)
+ {
+ if (DataAvailable != null)
+ DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
+ resetOutput();
+ }
+ }
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ public void Add(byte[] data)
+ {
+ Add(data,0,data.Length);
+ }
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+ /// <param name="count">The number of bytes to add</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ /// <remarks>This must be implemented by a derived class</remarks>
+ public abstract void Add(byte[] data, int offset, int count);
+
+ /// <summary>
+ /// Finishes up any pending data that needs to be processed and handled.
+ /// </summary>
+ /// <remarks>This must be implemented by a derived class</remarks>
+ public abstract void Finish();
+
+ /// <summary>
+ /// Gets the checksum of the data that has been added so far
+ /// </summary>
+ public uint Checksum { get { return _checksum; } }
+
+ #endregion
+
+ #region Destructor & IDisposable stuff
+
+ /// <summary>
+ /// Destroys this instance
+ /// </summary>
+ ~CodecBase()
+ {
+ CleanUp(false);
+ }
+
+ /// <summary>
+ /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+ /// </summary>
+ public void Dispose()
+ {
+ CleanUp(true);
+ }
+
+ /// <summary>
+ /// Performs any codec specific cleanup
+ /// </summary>
+ /// <remarks>This must be implemented by a derived class</remarks>
+ protected abstract void CleanUp();
+
+ // performs the release of the handles and calls the dereived CleanUp()
+ private void CleanUp(bool isDisposing)
+ {
+ if (!_isDisposed)
+ {
+ CleanUp();
+ if (_hInput.IsAllocated)
+ _hInput.Free();
+ if (_hOutput.IsAllocated)
+ _hOutput.Free();
+
+ _isDisposed = true;
+ }
+ }
+
+
+ #endregion
+
+ #region Helper methods
+
+ /// <summary>
+ /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+ /// </summary>
+ /// <param name="data">The byte array that contains the data to copy</param>
+ /// <param name="startIndex">The index of the first byte to copy</param>
+ /// <param name="count">The number of bytes to copy from <c>data</c></param>
+ protected void copyInput(byte[] data, int startIndex, int count)
+ {
+ Array.Copy(data, startIndex, _inBuffer,0, count);
+ _ztream.next_in = _hInput.AddrOfPinnedObject();
+ _ztream.total_in = 0;
+ _ztream.avail_in = (uint)count;
+
+ }
+
+ /// <summary>
+ /// Resets the internal output buffers to a known state - ready for processing
+ /// </summary>
+ protected void resetOutput()
+ {
+ _ztream.total_out = 0;
+ _ztream.avail_out = kBufferSize;
+ _ztream.next_out = _hOutput.AddrOfPinnedObject();
+ }
+
+ /// <summary>
+ /// Updates the running checksum property
+ /// </summary>
+ /// <param name="newSum">The new checksum value</param>
+ protected void setChecksum(uint newSum)
+ {
+ _checksum = newSum;
+ }
+ #endregion
+
+ }
+}
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+ /// <summary>
+ /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+ /// </summary>
+ public sealed class Deflater : CodecBase
+ {
+ #region Dll imports
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+ private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int deflate(ref ZStream sz, int flush);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int deflateReset(ref ZStream sz);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int deflateEnd(ref ZStream sz);
+ #endregion
+
+ /// <summary>
+ /// Constructs an new instance of the <c>Deflater</c>
+ /// </summary>
+ /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+ public Deflater(CompressLevel level) : base()
+ {
+ int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+ if (retval != 0)
+ throw new ZLibException(retval, "Could not initialize deflater");
+
+ resetOutput();
+ }
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+ /// <param name="count">The number of bytes to add</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ public override void Add(byte[] data, int offset, int count)
+ {
+ if (data == null) throw new ArgumentNullException();
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > data.Length) throw new ArgumentException();
+
+ int total = count;
+ int inputIndex = offset;
+ int err = 0;
+
+ while (err >= 0 && inputIndex < total)
+ {
+ copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+ while (err >= 0 && _ztream.avail_in > 0)
+ {
+ err = deflate(ref _ztream, (int)FlushTypes.None);
+ if (err == 0)
+ while (_ztream.avail_out == 0)
+ {
+ OnDataAvailable();
+ err = deflate(ref _ztream, (int)FlushTypes.None);
+ }
+ inputIndex += (int)_ztream.total_in;
+ }
+ }
+ setChecksum( _ztream.adler );
+ }
+
+
+ /// <summary>
+ /// Finishes up any pending data that needs to be processed and handled.
+ /// </summary>
+ public override void Finish()
+ {
+ int err;
+ do
+ {
+ err = deflate(ref _ztream, (int)FlushTypes.Finish);
+ OnDataAvailable();
+ }
+ while (err == 0);
+ setChecksum( _ztream.adler );
+ deflateReset(ref _ztream);
+ resetOutput();
+ }
+
+ /// <summary>
+ /// Closes the internal zlib deflate stream
+ /// </summary>
+ protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+ }
+}
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+ #region Internal types
+
+ /// <summary>
+ /// Defines constants for the various flush types used with zlib
+ /// </summary>
+ internal enum FlushTypes
+ {
+ None, Partial, Sync, Full, Finish, Block
+ }
+
+ #region ZStream structure
+ // internal mapping of the zlib zstream structure for marshalling
+ [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+ internal struct ZStream
+ {
+ public IntPtr next_in;
+ public uint avail_in;
+ public uint total_in;
+
+ public IntPtr next_out;
+ public uint avail_out;
+ public uint total_out;
+
+ [MarshalAs(UnmanagedType.LPStr)]
+ string msg;
+ uint state;
+
+ uint zalloc;
+ uint zfree;
+ uint opaque;
+
+ int data_type;
+ public uint adler;
+ uint reserved;
+ }
+
+ #endregion
+
+ #endregion
+
+ #region Public enums
+ /// <summary>
+ /// Defines constants for the available compression levels in zlib
+ /// </summary>
+ public enum CompressLevel : int
+ {
+ /// <summary>
+ /// The default compression level with a reasonable compromise between compression and speed
+ /// </summary>
+ Default = -1,
+ /// <summary>
+ /// No compression at all. The data are passed straight through.
+ /// </summary>
+ None = 0,
+ /// <summary>
+ /// The maximum compression rate available.
+ /// </summary>
+ Best = 9,
+ /// <summary>
+ /// The fastest available compression level.
+ /// </summary>
+ Fastest = 1
+ }
+ #endregion
+
+ #region Exception classes
+ /// <summary>
+ /// The exception that is thrown when an error occurs on the zlib dll
+ /// </summary>
+ public class ZLibException : ApplicationException
+ {
+ /// <summary>
+ /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+ /// error message and error code
+ /// </summary>
+ /// <param name="errorCode">The zlib error code that caused the exception</param>
+ /// <param name="msg">A message that (hopefully) describes the error</param>
+ public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+ {
+ }
+
+ /// <summary>
+ /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+ /// error code
+ /// </summary>
+ /// <param name="errorCode">The zlib error code that caused the exception</param>
+ public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+ {
+ }
+ }
+ #endregion
+
+ #region Interfaces
+
+ /// <summary>
+ /// Declares methods and properties that enables a running checksum to be calculated
+ /// </summary>
+ public interface ChecksumGenerator
+ {
+ /// <summary>
+ /// Gets the current value of the checksum
+ /// </summary>
+ uint Value { get; }
+
+ /// <summary>
+ /// Clears the current checksum to 0
+ /// </summary>
+ void Reset();
+
+ /// <summary>
+ /// Updates the current checksum with an array of bytes
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ void Update(byte[] data);
+
+ /// <summary>
+ /// Updates the current checksum with part of an array of bytes
+ /// </summary>
+ /// <param name="data">The data to update the checksum with</param>
+ /// <param name="offset">Where in <c>data</c> to start updating</param>
+ /// <param name="count">The number of bytes from <c>data</c> to use</param>
+ /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+ /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+ /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+ void Update(byte[] data, int offset, int count);
+
+ /// <summary>
+ /// Updates the current checksum with the data from a string
+ /// </summary>
+ /// <param name="data">The string to update the checksum with</param>
+ /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+ void Update(string data);
+
+ /// <summary>
+ /// Updates the current checksum with the data from a string, using a specific encoding
+ /// </summary>
+ /// <param name="data">The string to update the checksum with</param>
+ /// <param name="encoding">The encoding to use</param>
+ void Update(string data, Encoding encoding);
+ }
+
+
+ /// <summary>
+ /// Represents the method that will be called from a codec when new data
+ /// are available.
+ /// </summary>
+ /// <paramref name="data">The byte array containing the processed data</paramref>
+ /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+ /// <paramref name="count">The number of processed bytes available</paramref>
+ /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
+ /// You cannot assume that startIndex will be zero.
+ /// </remarks>
+ public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+ /// <summary>
+ /// Declares methods and events for implementing compressors/decompressors
+ /// </summary>
+ public interface Codec
+ {
+ /// <summary>
+ /// Occurs when more processed data are available.
+ /// </summary>
+ event DataAvailableHandler DataAvailable;
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ void Add(byte[] data);
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+ /// <param name="count">The number of bytes to add</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ void Add(byte[] data, int offset, int count);
+
+ /// <summary>
+ /// Finishes up any pending data that needs to be processed and handled.
+ /// </summary>
+ void Finish();
+
+ /// <summary>
+ /// Gets the checksum of the data that has been added so far
+ /// </summary>
+ uint Checksum { get; }
+
+
+ }
+
+ #endregion
+
+ #region Classes
+ /// <summary>
+ /// Encapsulates general information about the ZLib library
+ /// </summary>
+ public class Info
+ {
+ #region DLL imports
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern uint zlibCompileFlags();
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern string zlibVersion();
+ #endregion
+
+ #region Private stuff
+ private uint _flags;
+
+ // helper function that unpacks a bitsize mask
+ private static int bitSize(uint bits)
+ {
+ switch (bits)
+ {
+ case 0: return 16;
+ case 1: return 32;
+ case 2: return 64;
+ }
+ return -1;
+ }
+ #endregion
+
+ /// <summary>
+ /// Constructs an instance of the <c>Info</c> class.
+ /// </summary>
+ public Info()
+ {
+ _flags = zlibCompileFlags();
+ }
+
+ /// <summary>
+ /// True if the library is compiled with debug info
+ /// </summary>
+ public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+ /// <summary>
+ /// True if the library is compiled with assembly optimizations
+ /// </summary>
+ public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+ /// <summary>
+ /// Gets the size of the unsigned int that was compiled into Zlib
+ /// </summary>
+ public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+ /// <summary>
+ /// Gets the size of the unsigned long that was compiled into Zlib
+ /// </summary>
+ public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+ /// <summary>
+ /// Gets the size of the pointers that were compiled into Zlib
+ /// </summary>
+ public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+ /// <summary>
+ /// Gets the size of the z_off_t type that was compiled into Zlib
+ /// </summary>
+ public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+ /// <summary>
+ /// Gets the version of ZLib as a string, e.g. "1.2.1"
+ /// </summary>
+ public static string Version { get { return zlibVersion(); } }
+ }
+
+ #endregion
+
+}
--- /dev/null
+<VisualStudioProject>
+ <CSHARP
+ ProjectType = "Local"
+ ProductVersion = "7.10.3077"
+ SchemaVersion = "2.0"
+ ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+ >
+ <Build>
+ <Settings
+ ApplicationIcon = ""
+ AssemblyKeyContainerName = ""
+ AssemblyName = "DotZLib"
+ AssemblyOriginatorKeyFile = ""
+ DefaultClientScript = "JScript"
+ DefaultHTMLPageLayout = "Grid"
+ DefaultTargetSchema = "IE50"
+ DelaySign = "false"
+ OutputType = "Library"
+ PreBuildEvent = ""
+ PostBuildEvent = ""
+ RootNamespace = "DotZLib"
+ RunPostBuildEvent = "OnBuildSuccess"
+ StartupObject = ""
+ >
+ <Config
+ Name = "Debug"
+ AllowUnsafeBlocks = "false"
+ BaseAddress = "285212672"
+ CheckForOverflowUnderflow = "false"
+ ConfigurationOverrideFile = ""
+ DefineConstants = "DEBUG;TRACE"
+ DocumentationFile = "docs\DotZLib.xml"
+ DebugSymbols = "true"
+ FileAlignment = "4096"
+ IncrementalBuild = "false"
+ NoStdLib = "false"
+ NoWarn = "1591"
+ Optimize = "false"
+ OutputPath = "bin\Debug\"
+ RegisterForComInterop = "false"
+ RemoveIntegerChecks = "false"
+ TreatWarningsAsErrors = "false"
+ WarningLevel = "4"
+ />
+ <Config
+ Name = "Release"
+ AllowUnsafeBlocks = "false"
+ BaseAddress = "285212672"
+ CheckForOverflowUnderflow = "false"
+ ConfigurationOverrideFile = ""
+ DefineConstants = "TRACE"
+ DocumentationFile = "docs\DotZLib.xml"
+ DebugSymbols = "false"
+ FileAlignment = "4096"
+ IncrementalBuild = "false"
+ NoStdLib = "false"
+ NoWarn = ""
+ Optimize = "true"
+ OutputPath = "bin\Release\"
+ RegisterForComInterop = "false"
+ RemoveIntegerChecks = "false"
+ TreatWarningsAsErrors = "false"
+ WarningLevel = "4"
+ />
+ </Settings>
+ <References>
+ <Reference
+ Name = "System"
+ AssemblyName = "System"
+ HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+ />
+ <Reference
+ Name = "System.Data"
+ AssemblyName = "System.Data"
+ HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+ />
+ <Reference
+ Name = "System.XML"
+ AssemblyName = "System.Xml"
+ HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+ />
+ <Reference
+ Name = "nunit.framework"
+ AssemblyName = "nunit.framework"
+ HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+ AssemblyFolderKey = "hklm\dn\nunit.framework"
+ />
+ </References>
+ </Build>
+ <Files>
+ <Include>
+ <File
+ RelPath = "AssemblyInfo.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "ChecksumImpl.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "CircularBuffer.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "CodecBase.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "Deflater.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "DotZLib.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "GZipStream.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "Inflater.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ <File
+ RelPath = "UnitTests.cs"
+ SubType = "Code"
+ BuildAction = "Compile"
+ />
+ </Include>
+ </Files>
+ </CSHARP>
+</VisualStudioProject>
+
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+ /// <summary>
+ /// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+ /// </summary>
+ public class GZipStream : Stream, IDisposable
+ {
+ #region Dll Imports
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+ private static extern IntPtr gzopen(string name, string mode);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int gzclose(IntPtr gzFile);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int gzread(IntPtr gzFile, int data, int length);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int gzgetc(IntPtr gzFile);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int gzputc(IntPtr gzFile, int c);
+
+ #endregion
+
+ #region Private data
+ private IntPtr _gzFile;
+ private bool _isDisposed = false;
+ private bool _isWriting;
+ #endregion
+
+ #region Constructors
+ /// <summary>
+ /// Creates a new file as a writeable GZipStream
+ /// </summary>
+ /// <param name="fileName">The name of the compressed file to create</param>
+ /// <param name="level">The compression level to use when adding data</param>
+ /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+ public GZipStream(string fileName, CompressLevel level)
+ {
+ _isWriting = true;
+ _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+ if (_gzFile == IntPtr.Zero)
+ throw new ZLibException(-1, "Could not open " + fileName);
+ }
+
+ /// <summary>
+ /// Opens an existing file as a readable GZipStream
+ /// </summary>
+ /// <param name="fileName">The name of the file to open</param>
+ /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+ public GZipStream(string fileName)
+ {
+ _isWriting = false;
+ _gzFile = gzopen(fileName, "rb");
+ if (_gzFile == IntPtr.Zero)
+ throw new ZLibException(-1, "Could not open " + fileName);
+
+ }
+ #endregion
+
+ #region Access properties
+ /// <summary>
+ /// Returns true of this stream can be read from, false otherwise
+ /// </summary>
+ public override bool CanRead
+ {
+ get
+ {
+ return !_isWriting;
+ }
+ }
+
+
+ /// <summary>
+ /// Returns false.
+ /// </summary>
+ public override bool CanSeek
+ {
+ get
+ {
+ return false;
+ }
+ }
+
+ /// <summary>
+ /// Returns true if this tsream is writeable, false otherwise
+ /// </summary>
+ public override bool CanWrite
+ {
+ get
+ {
+ return _isWriting;
+ }
+ }
+ #endregion
+
+ #region Destructor & IDispose stuff
+
+ /// <summary>
+ /// Destroys this instance
+ /// </summary>
+ ~GZipStream()
+ {
+ cleanUp(false);
+ }
+
+ /// <summary>
+ /// Closes the external file handle
+ /// </summary>
+ public void Dispose()
+ {
+ cleanUp(true);
+ }
+
+ // Does the actual closing of the file handle.
+ private void cleanUp(bool isDisposing)
+ {
+ if (!_isDisposed)
+ {
+ gzclose(_gzFile);
+ _isDisposed = true;
+ }
+ }
+ #endregion
+
+ #region Basic reading and writing
+ /// <summary>
+ /// Attempts to read a number of bytes from the stream.
+ /// </summary>
+ /// <param name="buffer">The destination data buffer</param>
+ /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+ /// <param name="count">The number of bytes requested</param>
+ /// <returns>The number of bytes read</returns>
+ /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+ /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+ /// <exception cref="ArgumentException">If <c>offset</c> + <c>count</c> is > buffer.Length</exception>
+ /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+ /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+ public override int Read(byte[] buffer, int offset, int count)
+ {
+ if (!CanRead) throw new NotSupportedException();
+ if (buffer == null) throw new ArgumentNullException();
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > buffer.Length) throw new ArgumentException();
+ if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+ GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+ int result;
+ try
+ {
+ result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+ if (result < 0)
+ throw new IOException();
+ }
+ finally
+ {
+ h.Free();
+ }
+ return result;
+ }
+
+ /// <summary>
+ /// Attempts to read a single byte from the stream.
+ /// </summary>
+ /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+ public override int ReadByte()
+ {
+ if (!CanRead) throw new NotSupportedException();
+ if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+ return gzgetc(_gzFile);
+ }
+
+ /// <summary>
+ /// Writes a number of bytes to the stream
+ /// </summary>
+ /// <param name="buffer"></param>
+ /// <param name="offset"></param>
+ /// <param name="count"></param>
+ /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+ /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+ /// <exception cref="ArgumentException">If <c>offset</c> + <c>count</c> is > buffer.Length</exception>
+ /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+ /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+ public override void Write(byte[] buffer, int offset, int count)
+ {
+ if (!CanWrite) throw new NotSupportedException();
+ if (buffer == null) throw new ArgumentNullException();
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > buffer.Length) throw new ArgumentException();
+ if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+ GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+ try
+ {
+ int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+ if (result < 0)
+ throw new IOException();
+ }
+ finally
+ {
+ h.Free();
+ }
+ }
+
+ /// <summary>
+ /// Writes a single byte to the stream
+ /// </summary>
+ /// <param name="value">The byte to add to the stream.</param>
+ /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+ /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+ public override void WriteByte(byte value)
+ {
+ if (!CanWrite) throw new NotSupportedException();
+ if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+ int result = gzputc(_gzFile, (int)value);
+ if (result < 0)
+ throw new IOException();
+ }
+ #endregion
+
+ #region Position & length stuff
+ /// <summary>
+ /// Not supported.
+ /// </summary>
+ /// <param name="value"></param>
+ /// <exception cref="NotSupportedException">Always thrown</exception>
+ public override void SetLength(long value)
+ {
+ throw new NotSupportedException();
+ }
+
+ /// <summary>
+ /// Not suppported.
+ /// </summary>
+ /// <param name="offset"></param>
+ /// <param name="origin"></param>
+ /// <returns></returns>
+ /// <exception cref="NotSupportedException">Always thrown</exception>
+ public override long Seek(long offset, SeekOrigin origin)
+ {
+ throw new NotSupportedException();
+ }
+
+ /// <summary>
+ /// Flushes the <c>GZipStream</c>.
+ /// </summary>
+ /// <remarks>In this implementation, this method does nothing. This is because excessive
+ /// flushing may degrade the achievable compression rates.</remarks>
+ public override void Flush()
+ {
+ // left empty on purpose
+ }
+
+ /// <summary>
+ /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+ /// </summary>
+ /// <remarks>In this implementation this property is not supported</remarks>
+ /// <exception cref="NotSupportedException">Always thrown</exception>
+ public override long Position
+ {
+ get
+ {
+ throw new NotSupportedException();
+ }
+ set
+ {
+ throw new NotSupportedException();
+ }
+ }
+
+ /// <summary>
+ /// Gets the size of the stream. Not suppported.
+ /// </summary>
+ /// <remarks>In this implementation this property is not supported</remarks>
+ /// <exception cref="NotSupportedException">Always thrown</exception>
+ public override long Length
+ {
+ get
+ {
+ throw new NotSupportedException();
+ }
+ }
+ #endregion
+ }
+}
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+ /// <summary>
+ /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+ /// </summary>
+ public class Inflater : CodecBase
+ {
+ #region Dll imports
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+ private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int inflate(ref ZStream sz, int flush);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int inflateReset(ref ZStream sz);
+
+ [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+ private static extern int inflateEnd(ref ZStream sz);
+ #endregion
+
+ /// <summary>
+ /// Constructs an new instance of the <c>Inflater</c>
+ /// </summary>
+ public Inflater() : base()
+ {
+ int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+ if (retval != 0)
+ throw new ZLibException(retval, "Could not initialize inflater");
+
+ resetOutput();
+ }
+
+
+ /// <summary>
+ /// Adds more data to the codec to be processed.
+ /// </summary>
+ /// <param name="data">Byte array containing the data to be added to the codec</param>
+ /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+ /// <param name="count">The number of bytes to add</param>
+ /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+ public override void Add(byte[] data, int offset, int count)
+ {
+ if (data == null) throw new ArgumentNullException();
+ if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+ if ((offset+count) > data.Length) throw new ArgumentException();
+
+ int total = count;
+ int inputIndex = offset;
+ int err = 0;
+
+ while (err >= 0 && inputIndex < total)
+ {
+ copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+ err = inflate(ref _ztream, (int)FlushTypes.None);
+ if (err == 0)
+ while (_ztream.avail_out == 0)
+ {
+ OnDataAvailable();
+ err = inflate(ref _ztream, (int)FlushTypes.None);
+ }
+
+ inputIndex += (int)_ztream.total_in;
+ }
+ setChecksum( _ztream.adler );
+ }
+
+
+ /// <summary>
+ /// Finishes up any pending data that needs to be processed and handled.
+ /// </summary>
+ public override void Finish()
+ {
+ int err;
+ do
+ {
+ err = inflate(ref _ztream, (int)FlushTypes.Finish);
+ OnDataAvailable();
+ }
+ while (err == 0);
+ setChecksum( _ztream.adler );
+ inflateReset(ref _ztream);
+ resetOutput();
+ }
+
+ /// <summary>
+ /// Closes the internal zlib inflate stream
+ /// </summary>
+ protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+ }
+}
--- /dev/null
+//
+// © Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+ using DotZLib;
+
+ // helper methods
+ internal class Utils
+ {
+ public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+ {
+ if (lhs.Length != rhs.Length)
+ return false;
+ for (int i = lhs.Length-1; i >= 0; --i)
+ if (lhs[i] != rhs[i])
+ return false;
+ return true;
+ }
+
+ }
+
+
+ [TestFixture]
+ public class CircBufferTests
+ {
+ #region Circular buffer tests
+ [Test]
+ public void SinglePutGet()
+ {
+ CircularBuffer buf = new CircularBuffer(10);
+ Assert.AreEqual( 0, buf.Size );
+ Assert.AreEqual( -1, buf.Get() );
+
+ Assert.IsTrue(buf.Put( 1 ));
+ Assert.AreEqual( 1, buf.Size );
+ Assert.AreEqual( 1, buf.Get() );
+ Assert.AreEqual( 0, buf.Size );
+ Assert.AreEqual( -1, buf.Get() );
+ }
+
+ [Test]
+ public void BlockPutGet()
+ {
+ CircularBuffer buf = new CircularBuffer(10);
+ byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+ Assert.AreEqual( 10, buf.Put(arr,0,10) );
+ Assert.AreEqual( 10, buf.Size );
+ Assert.IsFalse( buf.Put(11) );
+ Assert.AreEqual( 1, buf.Get() );
+ Assert.IsTrue( buf.Put(11) );
+
+ byte[] arr2 = (byte[])arr.Clone();
+ Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+ Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+ }
+
+ #endregion
+ }
+
+ [TestFixture]
+ public class ChecksumTests
+ {
+ #region CRC32 Tests
+ [Test]
+ public void CRC32_Null()
+ {
+ CRC32Checksum crc32 = new CRC32Checksum();
+ Assert.AreEqual( 0, crc32.Value );
+
+ crc32 = new CRC32Checksum(1);
+ Assert.AreEqual( 1, crc32.Value );
+
+ crc32 = new CRC32Checksum(556);
+ Assert.AreEqual( 556, crc32.Value );
+ }
+
+ [Test]
+ public void CRC32_Data()
+ {
+ CRC32Checksum crc32 = new CRC32Checksum();
+ byte[] data = { 1,2,3,4,5,6,7 };
+ crc32.Update(data);
+ Assert.AreEqual( 0x70e46888, crc32.Value );
+
+ crc32 = new CRC32Checksum();
+ crc32.Update("penguin");
+ Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+ crc32 = new CRC32Checksum(1);
+ crc32.Update("penguin");
+ Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+ }
+ #endregion
+
+ #region Adler tests
+
+ [Test]
+ public void Adler_Null()
+ {
+ AdlerChecksum adler = new AdlerChecksum();
+ Assert.AreEqual(0, adler.Value);
+
+ adler = new AdlerChecksum(1);
+ Assert.AreEqual( 1, adler.Value );
+
+ adler = new AdlerChecksum(556);
+ Assert.AreEqual( 556, adler.Value );
+ }
+
+ [Test]
+ public void Adler_Data()
+ {
+ AdlerChecksum adler = new AdlerChecksum(1);
+ byte[] data = { 1,2,3,4,5,6,7 };
+ adler.Update(data);
+ Assert.AreEqual( 0x5b001d, adler.Value );
+
+ adler = new AdlerChecksum();
+ adler.Update("penguin");
+ Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+ adler = new AdlerChecksum(1);
+ adler.Update("penguin");
+ Assert.AreEqual(0x0bd602f7, adler.Value);
+
+ }
+ #endregion
+ }
+
+ [TestFixture]
+ public class InfoTests
+ {
+ #region Info tests
+ [Test]
+ public void Info_Version()
+ {
+ Info info = new Info();
+ Assert.AreEqual("1.2.8", Info.Version);
+ Assert.AreEqual(32, info.SizeOfUInt);
+ Assert.AreEqual(32, info.SizeOfULong);
+ Assert.AreEqual(32, info.SizeOfPointer);
+ Assert.AreEqual(32, info.SizeOfOffset);
+ }
+ #endregion
+ }
+
+ [TestFixture]
+ public class DeflateInflateTests
+ {
+ #region Deflate tests
+ [Test]
+ public void Deflate_Init()
+ {
+ using (Deflater def = new Deflater(CompressLevel.Default))
+ {
+ }
+ }
+
+ private ArrayList compressedData = new ArrayList();
+ private uint adler1;
+
+ private ArrayList uncompressedData = new ArrayList();
+ private uint adler2;
+
+ public void CDataAvail(byte[] data, int startIndex, int count)
+ {
+ for (int i = 0; i < count; ++i)
+ compressedData.Add(data[i+startIndex]);
+ }
+
+ [Test]
+ public void Deflate_Compress()
+ {
+ compressedData.Clear();
+
+ byte[] testData = new byte[35000];
+ for (int i = 0; i < testData.Length; ++i)
+ testData[i] = 5;
+
+ using (Deflater def = new Deflater((CompressLevel)5))
+ {
+ def.DataAvailable += new DataAvailableHandler(CDataAvail);
+ def.Add(testData);
+ def.Finish();
+ adler1 = def.Checksum;
+ }
+ }
+ #endregion
+
+ #region Inflate tests
+ [Test]
+ public void Inflate_Init()
+ {
+ using (Inflater inf = new Inflater())
+ {
+ }
+ }
+
+ private void DDataAvail(byte[] data, int startIndex, int count)
+ {
+ for (int i = 0; i < count; ++i)
+ uncompressedData.Add(data[i+startIndex]);
+ }
+
+ [Test]
+ public void Inflate_Expand()
+ {
+ uncompressedData.Clear();
+
+ using (Inflater inf = new Inflater())
+ {
+ inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+ inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+ inf.Finish();
+ adler2 = inf.Checksum;
+ }
+ Assert.AreEqual( adler1, adler2 );
+ }
+ #endregion
+ }
+
+ [TestFixture]
+ public class GZipStreamTests
+ {
+ #region GZipStream test
+ [Test]
+ public void GZipStream_WriteRead()
+ {
+ using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+ {
+ BinaryWriter writer = new BinaryWriter(gzOut);
+ writer.Write("hi there");
+ writer.Write(Math.PI);
+ writer.Write(42);
+ }
+
+ using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+ {
+ BinaryReader reader = new BinaryReader(gzIn);
+ string s = reader.ReadString();
+ Assert.AreEqual("hi there",s);
+ double d = reader.ReadDouble();
+ Assert.AreEqual(Math.PI, d);
+ int i = reader.ReadInt32();
+ Assert.AreEqual(42,i);
+ }
+
+ }
+ #endregion
+ }
+}
+
+#endif
--- /dev/null
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
\ No newline at end of file
--- /dev/null
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers,
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt - License file.
+readme.txt - This file.
+DotZLib.chm - Class library documentation
+DotZLib.build - NAnt build file
+DotZLib.sln - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+ Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+ will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on
+ you are building the release or debug version of the library. Check
+ DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+ build.
+
+2. Using NAnt:
+ Open a command prompt with access to the build environment and run nant
+ in the same directory as the DotZLib.build file.
+ You can define 2 properties on the nant command-line to control the build:
+ debug={true|false} to toggle between release/debug builds (default=true).
+ nunit={true|false} to include or esclude unit tests (default=true).
+ Also the target clean will remove binaries.
+ Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release
+ or ./DotZLib/bin/debug, depending on whether you are building the release
+ or debug version of the library.
+
+ Examples:
+ nant -D:debug=false -D:nunit=false
+ will build a release mode version of the library without unit tests.
+ nant
+ will build a debug version of the library with unit tests
+ nant clean
+ will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
--- /dev/null
+/*
+;uInt longest_match_x64(
+; deflate_state *s,
+; IPos cur_match); // current match
+
+; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
+; (AMD64 on Athlon 64, Opteron, Phenom
+; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+; from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+; and by taking inspiration on asm686 with masm, optimised assembly code
+; from Brian Raiter, written 1998
+;
+; This software is provided 'as-is', without any express or implied
+; warranty. In no event will the authors be held liable for any damages
+; arising from the use of this software.
+;
+; Permission is granted to anyone to use this software for any purpose,
+; including commercial applications, and to alter it and redistribute it
+; freely, subject to the following restrictions:
+;
+; 1. The origin of this software must not be misrepresented; you must not
+; claim that you wrote the original software. If you use this software
+; in a product, an acknowledgment in the product documentation would be
+; appreciated but is not required.
+; 2. Altered source versions must be plainly marked as such, and must not be
+; misrepresented as being the original software
+; 3. This notice may not be removed or altered from any source distribution.
+;
+; http://www.zlib.net
+; http://www.winimage.com/zLibDll
+; http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for zLib, I use option:
+; gcc -c -arch x86_64 gvmat64.S
+
+
+;uInt longest_match(s, cur_match)
+; deflate_state *s;
+; IPos cur_match; // current match /
+;
+; with XCode for Mac, I had strange error with some jump on intel syntax
+; this is why BEFORE_JMP and AFTER_JMP are used
+ */
+
+
+#define BEFORE_JMP .att_syntax
+#define AFTER_JMP .intel_syntax noprefix
+
+#ifndef NO_UNDERLINE
+# define match_init _match_init
+# define longest_match _longest_match
+#endif
+
+.intel_syntax noprefix
+
+.globl match_init, longest_match
+.text
+longest_match:
+
+
+
+#define LocalVarsSize 96
+/*
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register : r14,r15
+; register can be saved : rsp
+*/
+
+#define chainlenwmask (rsp + 8 - LocalVarsSize)
+#define nicematch (rsp + 16 - LocalVarsSize)
+
+#define save_rdi (rsp + 24 - LocalVarsSize)
+#define save_rsi (rsp + 32 - LocalVarsSize)
+#define save_rbx (rsp + 40 - LocalVarsSize)
+#define save_rbp (rsp + 48 - LocalVarsSize)
+#define save_r12 (rsp + 56 - LocalVarsSize)
+#define save_r13 (rsp + 64 - LocalVarsSize)
+#define save_r14 (rsp + 72 - LocalVarsSize)
+#define save_r15 (rsp + 80 - LocalVarsSize)
+
+
+/*
+; all the +4 offsets are due to the addition of pending_buf_size (in zlib
+; in the deflate_state structure since the asm code was first written
+; (if you compile with zlib 1.0.4 or older, remove the +4).
+; Note : these value are good with a 8 bytes boundary pack structure
+*/
+
+#define MAX_MATCH 258
+#define MIN_MATCH 3
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+
+/*
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+; all the +zlib1222add offsets are due to the addition of fields
+; in zlib in the deflate_state structure since the asm code was first written
+; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+*/
+
+
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow %u\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev %u\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+*/
+
+#define dsWSize 68
+#define dsWMask 76
+#define dsWindow 80
+#define dsPrev 96
+#define dsMatchLen 144
+#define dsPrevMatch 148
+#define dsStrStart 156
+#define dsMatchStart 160
+#define dsLookahead 164
+#define dsPrevLen 168
+#define dsMaxChainLen 172
+#define dsGoodMatch 188
+#define dsNiceMatch 192
+
+#define window_size [ rcx + dsWSize]
+#define WMask [ rcx + dsWMask]
+#define window_ad [ rcx + dsWindow]
+#define prev_ad [ rcx + dsPrev]
+#define strstart [ rcx + dsStrStart]
+#define match_start [ rcx + dsMatchStart]
+#define Lookahead [ rcx + dsLookahead] //; 0ffffffffh on infozip
+#define prev_length [ rcx + dsPrevLen]
+#define max_chain_length [ rcx + dsMaxChainLen]
+#define good_match [ rcx + dsGoodMatch]
+#define nice_match [ rcx + dsNiceMatch]
+
+/*
+; windows:
+; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+;
+; gcc on macosx-linux:
+; see http://www.x86-64.org/documentation/abi-0.99.pdf
+; param 1 in rdi, param 2 in rsi
+; rbx, rsp, rbp, r12 to r15 must be preserved
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+; mac: param 1 in rdi, param 2 rsi
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+*/
+ mov [save_rbx],rbx
+ mov [save_rbp],rbp
+
+
+ mov rcx,rdi
+
+ mov r8d,esi
+
+
+ mov [save_r12],r12
+ mov [save_r13],r13
+ mov [save_r14],r14
+ mov [save_r15],r15
+
+
+//;;; uInt wmask = s->w_mask;
+//;;; unsigned chain_length = s->max_chain_length;
+//;;; if (s->prev_length >= s->good_match) {
+//;;; chain_length >>= 2;
+//;;; }
+
+
+ mov edi, prev_length
+ mov esi, good_match
+ mov eax, WMask
+ mov ebx, max_chain_length
+ cmp edi, esi
+ jl LastMatchGood
+ shr ebx, 2
+LastMatchGood:
+
+//;;; chainlen is decremented once beforehand so that the function can
+//;;; use the sign flag instead of the zero flag for the exit test.
+//;;; It is then shifted into the high word, to make room for the wmask
+//;;; value, which it will always accompany.
+
+ dec ebx
+ shl ebx, 16
+ or ebx, eax
+
+//;;; on zlib only
+//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+
+
+ mov eax, nice_match
+ mov [chainlenwmask], ebx
+ mov r10d, Lookahead
+ cmp r10d, eax
+ cmovnl r10d, eax
+ mov [nicematch],r10d
+
+
+
+//;;; register Bytef *scan = s->window + s->strstart;
+ mov r10, window_ad
+ mov ebp, strstart
+ lea r13, [r10 + rbp]
+
+//;;; Determine how many bytes the scan ptr is off from being
+//;;; dword-aligned.
+
+ mov r9,r13
+ neg r13
+ and r13,3
+
+//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+//;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+
+ mov eax, window_size
+ sub eax, MIN_LOOKAHEAD
+
+
+ xor edi,edi
+ sub ebp, eax
+
+ mov r11d, prev_length
+
+ cmovng ebp,edi
+
+//;;; int best_len = s->prev_length;
+
+
+//;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+ lea rsi,[r10+r11]
+
+//;;; register ush scan_start = *(ushf*)scan;
+//;;; register ush scan_end = *(ushf*)(scan+best_len-1);
+//;;; Posf *prev = s->prev;
+
+ movzx r12d,word ptr [r9]
+ movzx ebx, word ptr [r9 + r11 - 1]
+
+ mov rdi, prev_ad
+
+//;;; Jump into the main loop.
+
+ mov edx, [chainlenwmask]
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ jz LookupLoopIsZero
+
+
+
+LookupLoop1:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ jbe LeaveNow
+
+
+
+ sub edx, 0x00010000
+ BEFORE_JMP
+ js LeaveNow
+ AFTER_JMP
+
+LoopEntry1:
+ cmp bx,word ptr [rsi + r8 - 1]
+ BEFORE_JMP
+ jz LookupLoopIsZero
+ AFTER_JMP
+
+LookupLoop2:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ BEFORE_JMP
+ jbe LeaveNow
+ AFTER_JMP
+ sub edx, 0x00010000
+ BEFORE_JMP
+ js LeaveNow
+ AFTER_JMP
+
+LoopEntry2:
+ cmp bx,word ptr [rsi + r8 - 1]
+ BEFORE_JMP
+ jz LookupLoopIsZero
+ AFTER_JMP
+
+LookupLoop4:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ BEFORE_JMP
+ jbe LeaveNow
+ AFTER_JMP
+ sub edx, 0x00010000
+ BEFORE_JMP
+ js LeaveNow
+ AFTER_JMP
+
+LoopEntry4:
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ BEFORE_JMP
+ jnz LookupLoop1
+ jmp LookupLoopIsZero
+ AFTER_JMP
+/*
+;;; do {
+;;; match = s->window + cur_match;
+;;; if (*(ushf*)(match+best_len-1) != scan_end ||
+;;; *(ushf*)match != scan_start) continue;
+;;; [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;; && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+*/
+.balign 16
+LookupLoop:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ BEFORE_JMP
+ jbe LeaveNow
+ AFTER_JMP
+ sub edx, 0x00010000
+ BEFORE_JMP
+ js LeaveNow
+ AFTER_JMP
+
+LoopEntry:
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ BEFORE_JMP
+ jnz LookupLoop1
+ AFTER_JMP
+LookupLoopIsZero:
+ cmp r12w, word ptr [r10 + r8]
+ BEFORE_JMP
+ jnz LookupLoop1
+ AFTER_JMP
+
+
+//;;; Store the current value of chainlen.
+ mov [chainlenwmask], edx
+/*
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+*/
+ lea rsi,[r8+r10]
+ mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
+ lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
+ lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
+
+ prefetcht1 [rsi+rdx]
+ prefetcht1 [rdi+rdx]
+
+/*
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+*/
+
+LoopCmps:
+ mov rax, [rsi + rdx]
+ xor rax, [rdi + rdx]
+ jnz LeaveLoopCmps
+
+ mov rax, [rsi + rdx + 8]
+ xor rax, [rdi + rdx + 8]
+ jnz LeaveLoopCmps8
+
+
+ mov rax, [rsi + rdx + 8+8]
+ xor rax, [rdi + rdx + 8+8]
+ jnz LeaveLoopCmps16
+
+ add rdx,8+8+8
+
+ BEFORE_JMP
+ jnz LoopCmps
+ jmp LenMaximum
+ AFTER_JMP
+
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+ test eax, 0x0000FFFF
+ jnz LenLower
+
+ test eax,0xffffffff
+
+ jnz LenLower32
+
+ add rdx,4
+ shr rax,32
+ or ax,ax
+ BEFORE_JMP
+ jnz LenLower
+ AFTER_JMP
+
+LenLower32:
+ shr eax,16
+ add rdx,2
+
+LenLower:
+ sub al, 1
+ adc rdx, 0
+//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+//;;; then automatically accept it as the best possible match and leave.
+
+ lea rax, [rdi + rdx]
+ sub rax, r9
+ cmp eax, MAX_MATCH
+ BEFORE_JMP
+ jge LenMaximum
+ AFTER_JMP
+/*
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+*/
+ cmp eax, r11d
+ jg LongerMatch
+
+ lea rsi,[r10+r11]
+
+ mov rdi, prev_ad
+ mov edx, [chainlenwmask]
+ BEFORE_JMP
+ jmp LookupLoop
+ AFTER_JMP
+/*
+;;; s->match_start = cur_match;
+;;; best_len = len;
+;;; if (len >= nice_match) break;
+;;; scan_end = *(ushf*)(scan+best_len-1);
+*/
+LongerMatch:
+ mov r11d, eax
+ mov match_start, r8d
+ cmp eax, [nicematch]
+ BEFORE_JMP
+ jge LeaveNow
+ AFTER_JMP
+
+ lea rsi,[r10+rax]
+
+ movzx ebx, word ptr [r9 + rax - 1]
+ mov rdi, prev_ad
+ mov edx, [chainlenwmask]
+ BEFORE_JMP
+ jmp LookupLoop
+ AFTER_JMP
+
+//;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+ mov r11d,MAX_MATCH
+ mov match_start, r8d
+
+//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+//;;; return s->lookahead;
+
+LeaveNow:
+ mov eax, Lookahead
+ cmp r11d, eax
+ cmovng eax, r11d
+
+
+
+//;;; Restore the stack and return from whence we came.
+
+
+// mov rsi,[save_rsi]
+// mov rdi,[save_rdi]
+ mov rbx,[save_rbx]
+ mov rbp,[save_rbp]
+ mov r12,[save_r12]
+ mov r13,[save_r13]
+ mov r14,[save_r14]
+ mov r15,[save_r15]
+
+
+ ret 0
+//; please don't remove this string !
+//; Your can freely use gvmat64 in any free or commercial app
+//; but it is far better don't remove the string in the binary!
+ // db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+
+
+match_init:
+ ret 0
+
+
--- /dev/null
+See infback9.h for what this is and how to use it.
--- /dev/null
+/* infback9.c -- inflate deflate64 data using a call-back interface
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infback9.h"
+#include "inftree9.h"
+#include "inflate9.h"
+
+#define WSIZE 65536UL
+
+/*
+ strm provides memory allocation functions in zalloc and zfree, or
+ Z_NULL to use the library memory allocation functions.
+
+ window is a user-supplied window and output buffer that is 64K bytes.
+ */
+int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
+z_stream FAR *strm;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL || window == Z_NULL)
+ return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+ state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+ sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (voidpf)state;
+ state->window = window;
+ return Z_OK;
+}
+
+/*
+ Build and output length and distance decoding tables for fixed code
+ decoding.
+ */
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+void makefixed9(void)
+{
+ unsigned sym, bits, low, size;
+ code *next, *lenfix, *distfix;
+ struct inflate_state state;
+ code fixed[544];
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state.lens[sym++] = 8;
+ while (sym < 256) state.lens[sym++] = 9;
+ while (sym < 280) state.lens[sym++] = 7;
+ while (sym < 288) state.lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state.lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work);
+
+ /* write tables */
+ puts(" /* inffix9.h -- table for decoding deflate64 fixed codes");
+ puts(" * Generated automatically by makefixed9().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits,
+ lenfix[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 5) == 0) printf("\n ");
+ printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits,
+ distfix[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/* Macros for inflateBack(): */
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Assure that some input is available. If input is requested, but denied,
+ then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+ do { \
+ if (have == 0) { \
+ have = in(in_desc, &next); \
+ if (have == 0) { \
+ next = Z_NULL; \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+ with an error if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ PULL(); \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflateBack() with
+ an error. */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n <= 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Assure that some output space is available, by writing out the window
+ if it's full. If the write fails, return from inflateBack() with a
+ Z_BUF_ERROR. */
+#define ROOM() \
+ do { \
+ if (left == 0) { \
+ put = window; \
+ left = WSIZE; \
+ wrap = 1; \
+ if (out(out_desc, put, (unsigned)left)) { \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/*
+ strm provides the memory allocation functions and window buffer on input,
+ and provides information on the unused input on return. For Z_DATA_ERROR
+ returns, strm will also provide an error message.
+
+ in() and out() are the call-back input and output functions. When
+ inflateBack() needs more input, it calls in(). When inflateBack() has
+ filled the window with output, or when it completes with data in the
+ window, it calls out() to write out the data. The application must not
+ change the provided input until in() is called again or inflateBack()
+ returns. The application must not change the window/output buffer until
+ inflateBack() returns.
+
+ in() and out() are called with a descriptor parameter provided in the
+ inflateBack() call. This parameter can be a structure that provides the
+ information required to do the read or write, as well as accumulated
+ information on the input and output such as totals and check values.
+
+ in() should return zero on failure. out() should return non-zero on
+ failure. If either in() or out() fails, than inflateBack() returns a
+ Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
+ was in() or out() that caused in the error. Otherwise, inflateBack()
+ returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+ error, or Z_MEM_ERROR if it could not allocate memory for the state.
+ inflateBack() can also return Z_STREAM_ERROR if the input parameters
+ are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
+z_stream FAR *strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have; /* available input */
+ unsigned long left; /* available output */
+ inflate_mode mode; /* current inflate mode */
+ int lastblock; /* true if processing last block */
+ int wrap; /* true if the window has wrapped */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned extra; /* extra bits needed */
+ unsigned long length; /* literal or length of data to copy */
+ unsigned long offset; /* distance back to copy string from */
+ unsigned long copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+#include "inffix9.h"
+
+ /* Check that the strm exists and that the state was initialized */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* Reset the state */
+ strm->msg = Z_NULL;
+ mode = TYPE;
+ lastblock = 0;
+ wrap = 0;
+ window = state->window;
+ next = strm->next_in;
+ have = next != Z_NULL ? strm->avail_in : 0;
+ hold = 0;
+ bits = 0;
+ put = window;
+ left = WSIZE;
+ lencode = Z_NULL;
+ distcode = Z_NULL;
+
+ /* Inflate until end of block marked as last */
+ for (;;)
+ switch (mode) {
+ case TYPE:
+ /* determine and dispatch block type */
+ if (lastblock) {
+ BYTEBITS();
+ mode = DONE;
+ break;
+ }
+ NEEDBITS(3);
+ lastblock = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = STORED;
+ break;
+ case 1: /* fixed block */
+ lencode = lenfix;
+ lenbits = 9;
+ distcode = distfix;
+ distbits = 5;
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ lastblock ? " (last)" : ""));
+ mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+
+ case STORED:
+ /* get and verify stored block length */
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ mode = BAD;
+ break;
+ }
+ length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %lu\n",
+ length));
+ INITBITS();
+
+ /* copy stored block from input to output */
+ while (length != 0) {
+ copy = length;
+ PULL();
+ ROOM();
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ length -= copy;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ mode = TYPE;
+ break;
+
+ case TABLE:
+ /* get dynamic table entries descriptor */
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+ if (state->nlen > 286) {
+ strm->msg = (char *)"too many length symbols";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: table sizes ok\n"));
+
+ /* get code length code lengths (not a typo) */
+ state->have = 0;
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ lencode = (code const FAR *)(state->next);
+ lenbits = 7;
+ ret = inflate_table9(CODES, state->lens, 19, &(state->next),
+ &(lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+
+ /* get length and distance code code lengths */
+ state->have = 0;
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = lencode[BITS(lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ NEEDBITS(here.bits);
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ mode = BAD;
+ break;
+ }
+ len = (unsigned)(state->lens[state->have - 1]);
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftree9.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ lencode = (code const FAR *)(state->next);
+ lenbits = 9;
+ ret = inflate_table9(LENS, state->lens, state->nlen,
+ &(state->next), &(lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ mode = BAD;
+ break;
+ }
+ distcode = (code const FAR *)(state->next);
+ distbits = 6;
+ ret = inflate_table9(DISTS, state->lens + state->nlen,
+ state->ndist, &(state->next), &(distbits),
+ state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ mode = LEN;
+
+ case LEN:
+ /* get a literal, length, or end-of-block code */
+ for (;;) {
+ here = lencode[BITS(lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ length = (unsigned)here.val;
+
+ /* process literal */
+ if (here.op == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ ROOM();
+ *put++ = (unsigned char)(length);
+ left--;
+ mode = LEN;
+ break;
+ }
+
+ /* process end of block */
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ mode = TYPE;
+ break;
+ }
+
+ /* invalid code */
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ mode = BAD;
+ break;
+ }
+
+ /* length code -- get extra bits, if any */
+ extra = (unsigned)(here.op) & 31;
+ if (extra != 0) {
+ NEEDBITS(extra);
+ length += BITS(extra);
+ DROPBITS(extra);
+ }
+ Tracevv((stderr, "inflate: length %lu\n", length));
+
+ /* get distance code */
+ for (;;) {
+ here = distcode[BITS(distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ mode = BAD;
+ break;
+ }
+ offset = (unsigned)here.val;
+
+ /* get distance extra bits, if any */
+ extra = (unsigned)(here.op) & 15;
+ if (extra != 0) {
+ NEEDBITS(extra);
+ offset += BITS(extra);
+ DROPBITS(extra);
+ }
+ if (offset > WSIZE - (wrap ? 0: left)) {
+ strm->msg = (char *)"invalid distance too far back";
+ mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %lu\n", offset));
+
+ /* copy match from window to output */
+ do {
+ ROOM();
+ copy = WSIZE - offset;
+ if (copy < left) {
+ from = put + copy;
+ copy = left - copy;
+ }
+ else {
+ from = put - offset;
+ copy = left;
+ }
+ if (copy > length) copy = length;
+ length -= copy;
+ left -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ } while (length != 0);
+ break;
+
+ case DONE:
+ /* inflate stream terminated properly -- write leftover output */
+ ret = Z_STREAM_END;
+ if (left < WSIZE) {
+ if (out(out_desc, window, (unsigned)(WSIZE - left)))
+ ret = Z_BUF_ERROR;
+ }
+ goto inf_leave;
+
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+
+ default: /* can't happen, but makes compilers happy */
+ ret = Z_STREAM_ERROR;
+ goto inf_leave;
+ }
+
+ /* Return unused input */
+ inf_leave:
+ strm->next_in = next;
+ strm->avail_in = have;
+ return ret;
+}
+
+int ZEXPORT inflateBack9End(strm)
+z_stream FAR *strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
--- /dev/null
+/* infback9.h -- header for using inflateBack9 functions
+ * Copyright (C) 2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * This header file and associated patches provide a decoder for PKWare's
+ * undocumented deflate64 compression method (method 9). Use with infback9.c,
+ * inftree9.h, inftree9.c, and inffix9.h. These patches are not supported.
+ * This should be compiled with zlib, since it uses zutil.h and zutil.o.
+ * This code has not yet been tested on 16-bit architectures. See the
+ * comments in zlib.h for inflateBack() usage. These functions are used
+ * identically, except that there is no windowBits parameter, and a 64K
+ * window must be provided. Also if int's are 16 bits, then a zero for
+ * the third parameter of the "out" function actually means 65536UL.
+ * zlib.h must be included before this header file.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm));
+ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#define inflateBack9Init(strm, window) \
+ inflateBack9Init_((strm), (window), \
+ ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null
+ /* inffix9.h -- table for decoding deflate64 fixed codes
+ * Generated automatically by makefixed9().
+ */
+
+ /* WARNING: this file should *not* be used by applications.
+ It is part of the implementation of this library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112},
+ {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160},
+ {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88},
+ {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208},
+ {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136},
+ {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227},
+ {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},
+ {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124},
+ {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184},
+ {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82},
+ {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196},
+ {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130},
+ {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106},
+ {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},
+ {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118},
+ {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94},
+ {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220},
+ {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131},
+ {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97},
+ {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226},
+ {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121},
+ {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178},
+ {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85},
+ {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},
+ {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154},
+ {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109},
+ {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250},
+ {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115},
+ {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166},
+ {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214},
+ {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},
+ {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0},
+ {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103},
+ {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238},
+ {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127},
+ {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},
+ {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193},
+ {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145},
+ {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104},
+ {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241},
+ {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169},
+ {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92},
+ {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217},
+ {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140},
+ {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163},
+ {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98},
+ {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122},
+ {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181},
+ {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86},
+ {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205},
+ {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134},
+ {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157},
+ {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},
+ {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113},
+ {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89},
+ {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211},
+ {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137},
+ {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3},
+ {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101},
+ {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},
+ {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125},
+ {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187},
+ {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83},
+ {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199},
+ {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151},
+ {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107},
+ {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247},
+ {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119},
+ {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175},
+ {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95},
+ {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},
+ {0,8,79},{0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5},
+ {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513},
+ {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129},
+ {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145},
+ {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4},
+ {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073},
+ {134,5,193},{142,5,49153}
+ };
--- /dev/null
+/* inflate9.h -- internal inflate state definition
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ STORED, /* i: waiting for stored size (length and complement) */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LEN, /* i: waiting for length/lit code */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD /* got a data error -- remain here until reset */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to the BAD mode -- not shown for clarity)
+
+ Read deflate blocks:
+ TYPE -> STORED or TABLE or LEN or DONE
+ STORED -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN
+ Read deflate codes:
+ LEN -> LEN or TYPE
+ */
+
+/* state maintained between inflate() calls. Approximately 7K bytes. */
+struct inflate_state {
+ /* sliding window */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+};
--- /dev/null
+/* inftree9.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftree9.h"
+
+#define MAXBITS 15
+
+const char inflate9_copyright[] =
+ " inflate9 1.2.8 Copyright 1995-2013 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int inflate_table9(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code this; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
+ 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
+ 131, 163, 195, 227, 3, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
+ 130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
+ 133, 133, 133, 133, 144, 72, 78};
+ static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
+ 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
+ 4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
+ static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
+ 128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
+ 133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,
+ 139, 139, 140, 140, 141, 141, 142, 142};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) return -1; /* no codes! */
+ for (min = 1; min <= MAXBITS; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftree9.h
+ for more information.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if ((type == LENS && used >= ENOUGH_LENS) ||
+ (type == DISTS && used >= ENOUGH_DISTS))
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ this.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ this.op = (unsigned char)0;
+ this.val = work[sym];
+ }
+ else if ((int)(work[sym]) > end) {
+ this.op = (unsigned char)(extra[work[sym]]);
+ this.val = base[work[sym]];
+ }
+ else {
+ this.op = (unsigned char)(32 + 64); /* end of block */
+ this.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = this;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += 1U << curr;
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if ((type == LENS && used >= ENOUGH_LENS) ||
+ (type == DISTS && used >= ENOUGH_DISTS))
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /*
+ Fill in rest of table for incomplete codes. This loop is similar to the
+ loop above in incrementing huff for table indices. It is assumed that
+ len is equal to curr + drop, so there is no loop needed to increment
+ through high index bits. When the current sub-table is filled, the loop
+ drops back to the root table to fill in any remaining entries there.
+ */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)(len - drop);
+ this.val = (unsigned short)0;
+ while (huff != 0) {
+ /* when done with sub-table, drop back to root table */
+ if (drop != 0 && (huff & mask) != low) {
+ drop = 0;
+ len = root;
+ next = *table;
+ curr = root;
+ this.bits = (unsigned char)len;
+ }
+
+ /* put invalid code marker in table */
+ next[huff >> drop] = this;
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
--- /dev/null
+/* inftree9.h -- header to use inftree9.c
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 100eeeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1446, which is the sum of 852 for literal/length codes and 594 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in infback9.c. If the root table size is changed,
+ then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table9() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+extern int inflate_table9 OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
--- /dev/null
+/* inffas86.c is a hand tuned assembler version of
+ *
+ * inffast.c -- fast decoding
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at
+ * the moment. I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled. I will attempt to merge the MMX code into this version. Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ struct inffast_ar {
+/* 64 32 x86 x86_64 */
+/* ar offset register */
+/* 0 0 */ void *esp; /* esp save */
+/* 8 4 */ void *ebp; /* ebp save */
+/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */
+/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */
+/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */
+/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */
+/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */
+/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */
+/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */
+/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */
+/* 80 40 */ unsigned long hold; /* edx rdx local strm->hold */
+/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */
+/* 92 48 */ unsigned wsize; /* window size */
+/* 96 52 */ unsigned write; /* window write index */
+/*100 56 */ unsigned lmask; /* r12 mask for lcode */
+/*104 60 */ unsigned dmask; /* r13 mask for dcode */
+/*108 64 */ unsigned len; /* r14 match length */
+/*112 68 */ unsigned dist; /* r15 match distance */
+/*116 72 */ unsigned status; /* set when state chng*/
+ } ar;
+
+#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ ar.in = strm->next_in;
+ ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+ ar.out = strm->next_out;
+ ar.beg = ar.out - (start - strm->avail_out);
+ ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+ ar.wsize = state->wsize;
+ ar.write = state->wnext;
+ ar.window = state->window;
+ ar.hold = state->hold;
+ ar.bits = state->bits;
+ ar.lcode = state->lencode;
+ ar.dcode = state->distcode;
+ ar.lmask = (1U << state->lenbits) - 1;
+ ar.dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+
+ /* align in on 1/2 hold size boundary */
+ while (((unsigned long)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+ ar.hold += (unsigned long)*ar.in++ << ar.bits;
+ ar.bits += 8;
+ }
+
+#if defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )
+ __asm__ __volatile__ (
+" leaq %0, %%rax\n"
+" movq %%rbp, 8(%%rax)\n" /* save regs rbp and rsp */
+" movq %%rsp, (%%rax)\n"
+" movq %%rax, %%rsp\n" /* make rsp point to &ar */
+" movq 16(%%rsp), %%rsi\n" /* rsi = in */
+" movq 32(%%rsp), %%rdi\n" /* rdi = out */
+" movq 24(%%rsp), %%r9\n" /* r9 = last */
+" movq 48(%%rsp), %%r10\n" /* r10 = end */
+" movq 64(%%rsp), %%rbp\n" /* rbp = lcode */
+" movq 72(%%rsp), %%r11\n" /* r11 = dcode */
+" movq 80(%%rsp), %%rdx\n" /* rdx = hold */
+" movl 88(%%rsp), %%ebx\n" /* ebx = bits */
+" movl 100(%%rsp), %%r12d\n" /* r12d = lmask */
+" movl 104(%%rsp), %%r13d\n" /* r13d = dmask */
+ /* r14d = len */
+ /* r15d = dist */
+" cld\n"
+" cmpq %%rdi, %%r10\n"
+" je .L_one_time\n" /* if only one decode left */
+" cmpq %%rsi, %%r9\n"
+" je .L_one_time\n"
+" jmp .L_do_loop\n"
+
+".L_one_time:\n"
+" movq %%r12, %%r8\n" /* r8 = lmask */
+" cmpb $32, %%bl\n"
+" ja .L_get_length_code_one_time\n"
+
+" lodsl\n" /* eax = *(uint *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $32, %%bl\n" /* bits += 32 */
+" shlq %%cl, %%rax\n"
+" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */
+" jmp .L_get_length_code_one_time\n"
+
+".align 32,0x90\n"
+".L_while_test:\n"
+" cmpq %%rdi, %%r10\n"
+" jbe .L_break_loop\n"
+" cmpq %%rsi, %%r9\n"
+" jbe .L_break_loop\n"
+
+".L_do_loop:\n"
+" movq %%r12, %%r8\n" /* r8 = lmask */
+" cmpb $32, %%bl\n"
+" ja .L_get_length_code\n" /* if (32 < bits) */
+
+" lodsl\n" /* eax = *(uint *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $32, %%bl\n" /* bits += 32 */
+" shlq %%cl, %%rax\n"
+" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */
+
+".L_get_length_code:\n"
+" andq %%rdx, %%r8\n" /* r8 &= hold */
+" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */
+
+" movb %%ah, %%cl\n" /* cl = this.bits */
+" subb %%ah, %%bl\n" /* bits -= this.bits */
+" shrq %%cl, %%rdx\n" /* hold >>= this.bits */
+
+" testb %%al, %%al\n"
+" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */
+
+" movq %%r12, %%r8\n" /* r8 = lmask */
+" shrl $16, %%eax\n" /* output this.val char */
+" stosb\n"
+
+".L_get_length_code_one_time:\n"
+" andq %%rdx, %%r8\n" /* r8 &= hold */
+" movl (%%rbp,%%r8,4), %%eax\n" /* eax = lcode[hold & lmask] */
+
+".L_dolen:\n"
+" movb %%ah, %%cl\n" /* cl = this.bits */
+" subb %%ah, %%bl\n" /* bits -= this.bits */
+" shrq %%cl, %%rdx\n" /* hold >>= this.bits */
+
+" testb %%al, %%al\n"
+" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */
+
+" shrl $16, %%eax\n" /* output this.val char */
+" stosb\n"
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_test_for_length_base:\n"
+" movl %%eax, %%r14d\n" /* len = this */
+" shrl $16, %%r14d\n" /* len = this.val */
+" movb %%al, %%cl\n"
+
+" testb $16, %%al\n"
+" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */
+" andb $15, %%cl\n" /* op &= 15 */
+" jz .L_decode_distance\n" /* if (!op) */
+
+".L_add_bits_to_len:\n"
+" subb %%cl, %%bl\n"
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" shrq %%cl, %%rdx\n"
+" addl %%eax, %%r14d\n" /* len += hold & mask[op] */
+
+".L_decode_distance:\n"
+" movq %%r13, %%r8\n" /* r8 = dmask */
+" cmpb $32, %%bl\n"
+" ja .L_get_distance_code\n" /* if (32 < bits) */
+
+" lodsl\n" /* eax = *(uint *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $32, %%bl\n" /* bits += 32 */
+" shlq %%cl, %%rax\n"
+" orq %%rax, %%rdx\n" /* hold |= *((uint *)in)++ << bits */
+
+".L_get_distance_code:\n"
+" andq %%rdx, %%r8\n" /* r8 &= hold */
+" movl (%%r11,%%r8,4), %%eax\n" /* eax = dcode[hold & dmask] */
+
+".L_dodist:\n"
+" movl %%eax, %%r15d\n" /* dist = this */
+" shrl $16, %%r15d\n" /* dist = this.val */
+" movb %%ah, %%cl\n"
+" subb %%ah, %%bl\n" /* bits -= this.bits */
+" shrq %%cl, %%rdx\n" /* hold >>= this.bits */
+" movb %%al, %%cl\n" /* cl = this.op */
+
+" testb $16, %%al\n" /* if ((op & 16) == 0) */
+" jz .L_test_for_second_level_dist\n"
+" andb $15, %%cl\n" /* op &= 15 */
+" jz .L_check_dist_one\n"
+
+".L_add_bits_to_dist:\n"
+" subb %%cl, %%bl\n"
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n" /* (1 << op) - 1 */
+" andl %%edx, %%eax\n" /* eax &= hold */
+" shrq %%cl, %%rdx\n"
+" addl %%eax, %%r15d\n" /* dist += hold & ((1 << op) - 1) */
+
+".L_check_window:\n"
+" movq %%rsi, %%r8\n" /* save in so from can use it's reg */
+" movq %%rdi, %%rax\n"
+" subq 40(%%rsp), %%rax\n" /* nbytes = out - beg */
+
+" cmpl %%r15d, %%eax\n"
+" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */
+
+" movl %%r14d, %%ecx\n" /* ecx = len */
+" movq %%rdi, %%rsi\n"
+" subq %%r15, %%rsi\n" /* from = out - dist */
+
+" sarl %%ecx\n"
+" jnc .L_copy_two\n" /* if len % 2 == 0 */
+
+" rep movsw\n"
+" movb (%%rsi), %%al\n"
+" movb %%al, (%%rdi)\n"
+" incq %%rdi\n"
+
+" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */
+" jmp .L_while_test\n"
+
+".L_copy_two:\n"
+" rep movsw\n"
+" movq %%r8, %%rsi\n" /* move in back to %rsi, toss from */
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_check_dist_one:\n"
+" cmpl $1, %%r15d\n" /* if dist 1, is a memset */
+" jne .L_check_window\n"
+" cmpq %%rdi, 40(%%rsp)\n" /* if out == beg, outside window */
+" je .L_check_window\n"
+
+" movl %%r14d, %%ecx\n" /* ecx = len */
+" movb -1(%%rdi), %%al\n"
+" movb %%al, %%ah\n"
+
+" sarl %%ecx\n"
+" jnc .L_set_two\n"
+" movb %%al, (%%rdi)\n"
+" incq %%rdi\n"
+
+".L_set_two:\n"
+" rep stosw\n"
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_test_for_second_level_length:\n"
+" testb $64, %%al\n"
+" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */
+
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" addl %%r14d, %%eax\n" /* eax += len */
+" movl (%%rbp,%%rax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/
+" jmp .L_dolen\n"
+
+".align 32,0x90\n"
+".L_test_for_second_level_dist:\n"
+" testb $64, %%al\n"
+" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */
+
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" addl %%r15d, %%eax\n" /* eax += dist */
+" movl (%%r11,%%rax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/
+" jmp .L_dodist\n"
+
+".align 32,0x90\n"
+".L_clip_window:\n"
+" movl %%eax, %%ecx\n" /* ecx = nbytes */
+" movl 92(%%rsp), %%eax\n" /* eax = wsize, prepare for dist cmp */
+" negl %%ecx\n" /* nbytes = -nbytes */
+
+" cmpl %%r15d, %%eax\n"
+" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */
+
+" addl %%r15d, %%ecx\n" /* nbytes = dist - nbytes */
+" cmpl $0, 96(%%rsp)\n"
+" jne .L_wrap_around_window\n" /* if (write != 0) */
+
+" movq 56(%%rsp), %%rsi\n" /* from = window */
+" subl %%ecx, %%eax\n" /* eax -= nbytes */
+" addq %%rax, %%rsi\n" /* from += wsize - nbytes */
+
+" movl %%r14d, %%eax\n" /* eax = len */
+" cmpl %%ecx, %%r14d\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* eax -= nbytes */
+" rep movsb\n"
+" movq %%rdi, %%rsi\n"
+" subq %%r15, %%rsi\n" /* from = &out[ -dist ] */
+" jmp .L_do_copy\n"
+
+".align 32,0x90\n"
+".L_wrap_around_window:\n"
+" movl 96(%%rsp), %%eax\n" /* eax = write */
+" cmpl %%eax, %%ecx\n"
+" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */
+
+" movl 92(%%rsp), %%esi\n" /* from = wsize */
+" addq 56(%%rsp), %%rsi\n" /* from += window */
+" addq %%rax, %%rsi\n" /* from += write */
+" subq %%rcx, %%rsi\n" /* from -= nbytes */
+" subl %%eax, %%ecx\n" /* nbytes -= write */
+
+" movl %%r14d, %%eax\n" /* eax = len */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movq 56(%%rsp), %%rsi\n" /* from = window */
+" movl 96(%%rsp), %%ecx\n" /* nbytes = write */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movq %%rdi, %%rsi\n"
+" subq %%r15, %%rsi\n" /* from = out - dist */
+" jmp .L_do_copy\n"
+
+".align 32,0x90\n"
+".L_contiguous_in_window:\n"
+" movq 56(%%rsp), %%rsi\n" /* rsi = window */
+" addq %%rax, %%rsi\n"
+" subq %%rcx, %%rsi\n" /* from += write - nbytes */
+
+" movl %%r14d, %%eax\n" /* eax = len */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movq %%rdi, %%rsi\n"
+" subq %%r15, %%rsi\n" /* from = out - dist */
+" jmp .L_do_copy\n" /* if (nbytes >= len) */
+
+".align 32,0x90\n"
+".L_do_copy:\n"
+" movl %%eax, %%ecx\n" /* ecx = len */
+" rep movsb\n"
+
+" movq %%r8, %%rsi\n" /* move in back to %esi, toss from */
+" jmp .L_while_test\n"
+
+".L_test_for_end_of_block:\n"
+" testb $32, %%al\n"
+" jz .L_invalid_literal_length_code\n"
+" movl $1, 116(%%rsp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_literal_length_code:\n"
+" movl $2, 116(%%rsp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_distance_code:\n"
+" movl $3, 116(%%rsp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_distance_too_far:\n"
+" movl $4, 116(%%rsp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_break_loop:\n"
+" movl $0, 116(%%rsp)\n"
+
+".L_break_loop_with_status:\n"
+/* put in, out, bits, and hold back into ar and pop esp */
+" movq %%rsi, 16(%%rsp)\n" /* in */
+" movq %%rdi, 32(%%rsp)\n" /* out */
+" movl %%ebx, 88(%%rsp)\n" /* bits */
+" movq %%rdx, 80(%%rsp)\n" /* hold */
+" movq (%%rsp), %%rax\n" /* restore rbp and rsp */
+" movq 8(%%rsp), %%rbp\n"
+" movq %%rax, %%rsp\n"
+ :
+ : "m" (ar)
+ : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+ "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+ );
+#elif ( defined( __GNUC__ ) || defined( __ICC ) ) && defined( __i386 )
+ __asm__ __volatile__ (
+" leal %0, %%eax\n"
+" movl %%esp, (%%eax)\n" /* save esp, ebp */
+" movl %%ebp, 4(%%eax)\n"
+" movl %%eax, %%esp\n"
+" movl 8(%%esp), %%esi\n" /* esi = in */
+" movl 16(%%esp), %%edi\n" /* edi = out */
+" movl 40(%%esp), %%edx\n" /* edx = hold */
+" movl 44(%%esp), %%ebx\n" /* ebx = bits */
+" movl 32(%%esp), %%ebp\n" /* ebp = lcode */
+
+" cld\n"
+" jmp .L_do_loop\n"
+
+".align 32,0x90\n"
+".L_while_test:\n"
+" cmpl %%edi, 24(%%esp)\n" /* out < end */
+" jbe .L_break_loop\n"
+" cmpl %%esi, 12(%%esp)\n" /* in < last */
+" jbe .L_break_loop\n"
+
+".L_do_loop:\n"
+" cmpb $15, %%bl\n"
+" ja .L_get_length_code\n" /* if (15 < bits) */
+
+" xorl %%eax, %%eax\n"
+" lodsw\n" /* al = *(ushort *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $16, %%bl\n" /* bits += 16 */
+" shll %%cl, %%eax\n"
+" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */
+
+".L_get_length_code:\n"
+" movl 56(%%esp), %%eax\n" /* eax = lmask */
+" andl %%edx, %%eax\n" /* eax &= hold */
+" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[hold & lmask] */
+
+".L_dolen:\n"
+" movb %%ah, %%cl\n" /* cl = this.bits */
+" subb %%ah, %%bl\n" /* bits -= this.bits */
+" shrl %%cl, %%edx\n" /* hold >>= this.bits */
+
+" testb %%al, %%al\n"
+" jnz .L_test_for_length_base\n" /* if (op != 0) 45.7% */
+
+" shrl $16, %%eax\n" /* output this.val char */
+" stosb\n"
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_test_for_length_base:\n"
+" movl %%eax, %%ecx\n" /* len = this */
+" shrl $16, %%ecx\n" /* len = this.val */
+" movl %%ecx, 64(%%esp)\n" /* save len */
+" movb %%al, %%cl\n"
+
+" testb $16, %%al\n"
+" jz .L_test_for_second_level_length\n" /* if ((op & 16) == 0) 8% */
+" andb $15, %%cl\n" /* op &= 15 */
+" jz .L_decode_distance\n" /* if (!op) */
+" cmpb %%cl, %%bl\n"
+" jae .L_add_bits_to_len\n" /* if (op <= bits) */
+
+" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */
+" xorl %%eax, %%eax\n"
+" lodsw\n" /* al = *(ushort *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $16, %%bl\n" /* bits += 16 */
+" shll %%cl, %%eax\n"
+" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */
+" movb %%ch, %%cl\n" /* move op back to ecx */
+
+".L_add_bits_to_len:\n"
+" subb %%cl, %%bl\n"
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" shrl %%cl, %%edx\n"
+" addl %%eax, 64(%%esp)\n" /* len += hold & mask[op] */
+
+".L_decode_distance:\n"
+" cmpb $15, %%bl\n"
+" ja .L_get_distance_code\n" /* if (15 < bits) */
+
+" xorl %%eax, %%eax\n"
+" lodsw\n" /* al = *(ushort *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $16, %%bl\n" /* bits += 16 */
+" shll %%cl, %%eax\n"
+" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */
+
+".L_get_distance_code:\n"
+" movl 60(%%esp), %%eax\n" /* eax = dmask */
+" movl 36(%%esp), %%ecx\n" /* ecx = dcode */
+" andl %%edx, %%eax\n" /* eax &= hold */
+" movl (%%ecx,%%eax,4), %%eax\n"/* eax = dcode[hold & dmask] */
+
+".L_dodist:\n"
+" movl %%eax, %%ebp\n" /* dist = this */
+" shrl $16, %%ebp\n" /* dist = this.val */
+" movb %%ah, %%cl\n"
+" subb %%ah, %%bl\n" /* bits -= this.bits */
+" shrl %%cl, %%edx\n" /* hold >>= this.bits */
+" movb %%al, %%cl\n" /* cl = this.op */
+
+" testb $16, %%al\n" /* if ((op & 16) == 0) */
+" jz .L_test_for_second_level_dist\n"
+" andb $15, %%cl\n" /* op &= 15 */
+" jz .L_check_dist_one\n"
+" cmpb %%cl, %%bl\n"
+" jae .L_add_bits_to_dist\n" /* if (op <= bits) 97.6% */
+
+" movb %%cl, %%ch\n" /* stash op in ch, freeing cl */
+" xorl %%eax, %%eax\n"
+" lodsw\n" /* al = *(ushort *)in++ */
+" movb %%bl, %%cl\n" /* cl = bits, needs it for shifting */
+" addb $16, %%bl\n" /* bits += 16 */
+" shll %%cl, %%eax\n"
+" orl %%eax, %%edx\n" /* hold |= *((ushort *)in)++ << bits */
+" movb %%ch, %%cl\n" /* move op back to ecx */
+
+".L_add_bits_to_dist:\n"
+" subb %%cl, %%bl\n"
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n" /* (1 << op) - 1 */
+" andl %%edx, %%eax\n" /* eax &= hold */
+" shrl %%cl, %%edx\n"
+" addl %%eax, %%ebp\n" /* dist += hold & ((1 << op) - 1) */
+
+".L_check_window:\n"
+" movl %%esi, 8(%%esp)\n" /* save in so from can use it's reg */
+" movl %%edi, %%eax\n"
+" subl 20(%%esp), %%eax\n" /* nbytes = out - beg */
+
+" cmpl %%ebp, %%eax\n"
+" jb .L_clip_window\n" /* if (dist > nbytes) 4.2% */
+
+" movl 64(%%esp), %%ecx\n" /* ecx = len */
+" movl %%edi, %%esi\n"
+" subl %%ebp, %%esi\n" /* from = out - dist */
+
+" sarl %%ecx\n"
+" jnc .L_copy_two\n" /* if len % 2 == 0 */
+
+" rep movsw\n"
+" movb (%%esi), %%al\n"
+" movb %%al, (%%edi)\n"
+" incl %%edi\n"
+
+" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */
+" movl 32(%%esp), %%ebp\n" /* ebp = lcode */
+" jmp .L_while_test\n"
+
+".L_copy_two:\n"
+" rep movsw\n"
+" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */
+" movl 32(%%esp), %%ebp\n" /* ebp = lcode */
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_check_dist_one:\n"
+" cmpl $1, %%ebp\n" /* if dist 1, is a memset */
+" jne .L_check_window\n"
+" cmpl %%edi, 20(%%esp)\n"
+" je .L_check_window\n" /* out == beg, if outside window */
+
+" movl 64(%%esp), %%ecx\n" /* ecx = len */
+" movb -1(%%edi), %%al\n"
+" movb %%al, %%ah\n"
+
+" sarl %%ecx\n"
+" jnc .L_set_two\n"
+" movb %%al, (%%edi)\n"
+" incl %%edi\n"
+
+".L_set_two:\n"
+" rep stosw\n"
+" movl 32(%%esp), %%ebp\n" /* ebp = lcode */
+" jmp .L_while_test\n"
+
+".align 32,0x90\n"
+".L_test_for_second_level_length:\n"
+" testb $64, %%al\n"
+" jnz .L_test_for_end_of_block\n" /* if ((op & 64) != 0) */
+
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" addl 64(%%esp), %%eax\n" /* eax += len */
+" movl (%%ebp,%%eax,4), %%eax\n" /* eax = lcode[val+(hold&mask[op])]*/
+" jmp .L_dolen\n"
+
+".align 32,0x90\n"
+".L_test_for_second_level_dist:\n"
+" testb $64, %%al\n"
+" jnz .L_invalid_distance_code\n" /* if ((op & 64) != 0) */
+
+" xorl %%eax, %%eax\n"
+" incl %%eax\n"
+" shll %%cl, %%eax\n"
+" decl %%eax\n"
+" andl %%edx, %%eax\n" /* eax &= hold */
+" addl %%ebp, %%eax\n" /* eax += dist */
+" movl 36(%%esp), %%ecx\n" /* ecx = dcode */
+" movl (%%ecx,%%eax,4), %%eax\n" /* eax = dcode[val+(hold&mask[op])]*/
+" jmp .L_dodist\n"
+
+".align 32,0x90\n"
+".L_clip_window:\n"
+" movl %%eax, %%ecx\n"
+" movl 48(%%esp), %%eax\n" /* eax = wsize */
+" negl %%ecx\n" /* nbytes = -nbytes */
+" movl 28(%%esp), %%esi\n" /* from = window */
+
+" cmpl %%ebp, %%eax\n"
+" jb .L_invalid_distance_too_far\n" /* if (dist > wsize) */
+
+" addl %%ebp, %%ecx\n" /* nbytes = dist - nbytes */
+" cmpl $0, 52(%%esp)\n"
+" jne .L_wrap_around_window\n" /* if (write != 0) */
+
+" subl %%ecx, %%eax\n"
+" addl %%eax, %%esi\n" /* from += wsize - nbytes */
+
+" movl 64(%%esp), %%eax\n" /* eax = len */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movl %%edi, %%esi\n"
+" subl %%ebp, %%esi\n" /* from = out - dist */
+" jmp .L_do_copy\n"
+
+".align 32,0x90\n"
+".L_wrap_around_window:\n"
+" movl 52(%%esp), %%eax\n" /* eax = write */
+" cmpl %%eax, %%ecx\n"
+" jbe .L_contiguous_in_window\n" /* if (write >= nbytes) */
+
+" addl 48(%%esp), %%esi\n" /* from += wsize */
+" addl %%eax, %%esi\n" /* from += write */
+" subl %%ecx, %%esi\n" /* from -= nbytes */
+" subl %%eax, %%ecx\n" /* nbytes -= write */
+
+" movl 64(%%esp), %%eax\n" /* eax = len */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movl 28(%%esp), %%esi\n" /* from = window */
+" movl 52(%%esp), %%ecx\n" /* nbytes = write */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movl %%edi, %%esi\n"
+" subl %%ebp, %%esi\n" /* from = out - dist */
+" jmp .L_do_copy\n"
+
+".align 32,0x90\n"
+".L_contiguous_in_window:\n"
+" addl %%eax, %%esi\n"
+" subl %%ecx, %%esi\n" /* from += write - nbytes */
+
+" movl 64(%%esp), %%eax\n" /* eax = len */
+" cmpl %%ecx, %%eax\n"
+" jbe .L_do_copy\n" /* if (nbytes >= len) */
+
+" subl %%ecx, %%eax\n" /* len -= nbytes */
+" rep movsb\n"
+" movl %%edi, %%esi\n"
+" subl %%ebp, %%esi\n" /* from = out - dist */
+" jmp .L_do_copy\n" /* if (nbytes >= len) */
+
+".align 32,0x90\n"
+".L_do_copy:\n"
+" movl %%eax, %%ecx\n"
+" rep movsb\n"
+
+" movl 8(%%esp), %%esi\n" /* move in back to %esi, toss from */
+" movl 32(%%esp), %%ebp\n" /* ebp = lcode */
+" jmp .L_while_test\n"
+
+".L_test_for_end_of_block:\n"
+" testb $32, %%al\n"
+" jz .L_invalid_literal_length_code\n"
+" movl $1, 72(%%esp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_literal_length_code:\n"
+" movl $2, 72(%%esp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_distance_code:\n"
+" movl $3, 72(%%esp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_invalid_distance_too_far:\n"
+" movl 8(%%esp), %%esi\n"
+" movl $4, 72(%%esp)\n"
+" jmp .L_break_loop_with_status\n"
+
+".L_break_loop:\n"
+" movl $0, 72(%%esp)\n"
+
+".L_break_loop_with_status:\n"
+/* put in, out, bits, and hold back into ar and pop esp */
+" movl %%esi, 8(%%esp)\n" /* save in */
+" movl %%edi, 16(%%esp)\n" /* save out */
+" movl %%ebx, 44(%%esp)\n" /* save bits */
+" movl %%edx, 40(%%esp)\n" /* save hold */
+" movl 4(%%esp), %%ebp\n" /* restore esp, ebp */
+" movl (%%esp), %%esp\n"
+ :
+ : "m" (ar)
+ : "memory", "%eax", "%ebx", "%ecx", "%edx", "%esi", "%edi"
+ );
+#elif defined( _MSC_VER ) && ! defined( _M_AMD64 )
+ __asm {
+ lea eax, ar
+ mov [eax], esp /* save esp, ebp */
+ mov [eax+4], ebp
+ mov esp, eax
+ mov esi, [esp+8] /* esi = in */
+ mov edi, [esp+16] /* edi = out */
+ mov edx, [esp+40] /* edx = hold */
+ mov ebx, [esp+44] /* ebx = bits */
+ mov ebp, [esp+32] /* ebp = lcode */
+
+ cld
+ jmp L_do_loop
+
+ALIGN 4
+L_while_test:
+ cmp [esp+24], edi
+ jbe L_break_loop
+ cmp [esp+12], esi
+ jbe L_break_loop
+
+L_do_loop:
+ cmp bl, 15
+ ja L_get_length_code /* if (15 < bits) */
+
+ xor eax, eax
+ lodsw /* al = *(ushort *)in++ */
+ mov cl, bl /* cl = bits, needs it for shifting */
+ add bl, 16 /* bits += 16 */
+ shl eax, cl
+ or edx, eax /* hold |= *((ushort *)in)++ << bits */
+
+L_get_length_code:
+ mov eax, [esp+56] /* eax = lmask */
+ and eax, edx /* eax &= hold */
+ mov eax, [ebp+eax*4] /* eax = lcode[hold & lmask] */
+
+L_dolen:
+ mov cl, ah /* cl = this.bits */
+ sub bl, ah /* bits -= this.bits */
+ shr edx, cl /* hold >>= this.bits */
+
+ test al, al
+ jnz L_test_for_length_base /* if (op != 0) 45.7% */
+
+ shr eax, 16 /* output this.val char */
+ stosb
+ jmp L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+ mov ecx, eax /* len = this */
+ shr ecx, 16 /* len = this.val */
+ mov [esp+64], ecx /* save len */
+ mov cl, al
+
+ test al, 16
+ jz L_test_for_second_level_length /* if ((op & 16) == 0) 8% */
+ and cl, 15 /* op &= 15 */
+ jz L_decode_distance /* if (!op) */
+ cmp bl, cl
+ jae L_add_bits_to_len /* if (op <= bits) */
+
+ mov ch, cl /* stash op in ch, freeing cl */
+ xor eax, eax
+ lodsw /* al = *(ushort *)in++ */
+ mov cl, bl /* cl = bits, needs it for shifting */
+ add bl, 16 /* bits += 16 */
+ shl eax, cl
+ or edx, eax /* hold |= *((ushort *)in)++ << bits */
+ mov cl, ch /* move op back to ecx */
+
+L_add_bits_to_len:
+ sub bl, cl
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx /* eax &= hold */
+ shr edx, cl
+ add [esp+64], eax /* len += hold & mask[op] */
+
+L_decode_distance:
+ cmp bl, 15
+ ja L_get_distance_code /* if (15 < bits) */
+
+ xor eax, eax
+ lodsw /* al = *(ushort *)in++ */
+ mov cl, bl /* cl = bits, needs it for shifting */
+ add bl, 16 /* bits += 16 */
+ shl eax, cl
+ or edx, eax /* hold |= *((ushort *)in)++ << bits */
+
+L_get_distance_code:
+ mov eax, [esp+60] /* eax = dmask */
+ mov ecx, [esp+36] /* ecx = dcode */
+ and eax, edx /* eax &= hold */
+ mov eax, [ecx+eax*4]/* eax = dcode[hold & dmask] */
+
+L_dodist:
+ mov ebp, eax /* dist = this */
+ shr ebp, 16 /* dist = this.val */
+ mov cl, ah
+ sub bl, ah /* bits -= this.bits */
+ shr edx, cl /* hold >>= this.bits */
+ mov cl, al /* cl = this.op */
+
+ test al, 16 /* if ((op & 16) == 0) */
+ jz L_test_for_second_level_dist
+ and cl, 15 /* op &= 15 */
+ jz L_check_dist_one
+ cmp bl, cl
+ jae L_add_bits_to_dist /* if (op <= bits) 97.6% */
+
+ mov ch, cl /* stash op in ch, freeing cl */
+ xor eax, eax
+ lodsw /* al = *(ushort *)in++ */
+ mov cl, bl /* cl = bits, needs it for shifting */
+ add bl, 16 /* bits += 16 */
+ shl eax, cl
+ or edx, eax /* hold |= *((ushort *)in)++ << bits */
+ mov cl, ch /* move op back to ecx */
+
+L_add_bits_to_dist:
+ sub bl, cl
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax /* (1 << op) - 1 */
+ and eax, edx /* eax &= hold */
+ shr edx, cl
+ add ebp, eax /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+ mov [esp+8], esi /* save in so from can use it's reg */
+ mov eax, edi
+ sub eax, [esp+20] /* nbytes = out - beg */
+
+ cmp eax, ebp
+ jb L_clip_window /* if (dist > nbytes) 4.2% */
+
+ mov ecx, [esp+64] /* ecx = len */
+ mov esi, edi
+ sub esi, ebp /* from = out - dist */
+
+ sar ecx, 1
+ jnc L_copy_two
+
+ rep movsw
+ mov al, [esi]
+ mov [edi], al
+ inc edi
+
+ mov esi, [esp+8] /* move in back to %esi, toss from */
+ mov ebp, [esp+32] /* ebp = lcode */
+ jmp L_while_test
+
+L_copy_two:
+ rep movsw
+ mov esi, [esp+8] /* move in back to %esi, toss from */
+ mov ebp, [esp+32] /* ebp = lcode */
+ jmp L_while_test
+
+ALIGN 4
+L_check_dist_one:
+ cmp ebp, 1 /* if dist 1, is a memset */
+ jne L_check_window
+ cmp [esp+20], edi
+ je L_check_window /* out == beg, if outside window */
+
+ mov ecx, [esp+64] /* ecx = len */
+ mov al, [edi-1]
+ mov ah, al
+
+ sar ecx, 1
+ jnc L_set_two
+ mov [edi], al /* memset out with from[-1] */
+ inc edi
+
+L_set_two:
+ rep stosw
+ mov ebp, [esp+32] /* ebp = lcode */
+ jmp L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+ test al, 64
+ jnz L_test_for_end_of_block /* if ((op & 64) != 0) */
+
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx /* eax &= hold */
+ add eax, [esp+64] /* eax += len */
+ mov eax, [ebp+eax*4] /* eax = lcode[val+(hold&mask[op])]*/
+ jmp L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+ test al, 64
+ jnz L_invalid_distance_code /* if ((op & 64) != 0) */
+
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx /* eax &= hold */
+ add eax, ebp /* eax += dist */
+ mov ecx, [esp+36] /* ecx = dcode */
+ mov eax, [ecx+eax*4] /* eax = dcode[val+(hold&mask[op])]*/
+ jmp L_dodist
+
+ALIGN 4
+L_clip_window:
+ mov ecx, eax
+ mov eax, [esp+48] /* eax = wsize */
+ neg ecx /* nbytes = -nbytes */
+ mov esi, [esp+28] /* from = window */
+
+ cmp eax, ebp
+ jb L_invalid_distance_too_far /* if (dist > wsize) */
+
+ add ecx, ebp /* nbytes = dist - nbytes */
+ cmp dword ptr [esp+52], 0
+ jne L_wrap_around_window /* if (write != 0) */
+
+ sub eax, ecx
+ add esi, eax /* from += wsize - nbytes */
+
+ mov eax, [esp+64] /* eax = len */
+ cmp eax, ecx
+ jbe L_do_copy /* if (nbytes >= len) */
+
+ sub eax, ecx /* len -= nbytes */
+ rep movsb
+ mov esi, edi
+ sub esi, ebp /* from = out - dist */
+ jmp L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+ mov eax, [esp+52] /* eax = write */
+ cmp ecx, eax
+ jbe L_contiguous_in_window /* if (write >= nbytes) */
+
+ add esi, [esp+48] /* from += wsize */
+ add esi, eax /* from += write */
+ sub esi, ecx /* from -= nbytes */
+ sub ecx, eax /* nbytes -= write */
+
+ mov eax, [esp+64] /* eax = len */
+ cmp eax, ecx
+ jbe L_do_copy /* if (nbytes >= len) */
+
+ sub eax, ecx /* len -= nbytes */
+ rep movsb
+ mov esi, [esp+28] /* from = window */
+ mov ecx, [esp+52] /* nbytes = write */
+ cmp eax, ecx
+ jbe L_do_copy /* if (nbytes >= len) */
+
+ sub eax, ecx /* len -= nbytes */
+ rep movsb
+ mov esi, edi
+ sub esi, ebp /* from = out - dist */
+ jmp L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+ add esi, eax
+ sub esi, ecx /* from += write - nbytes */
+
+ mov eax, [esp+64] /* eax = len */
+ cmp eax, ecx
+ jbe L_do_copy /* if (nbytes >= len) */
+
+ sub eax, ecx /* len -= nbytes */
+ rep movsb
+ mov esi, edi
+ sub esi, ebp /* from = out - dist */
+ jmp L_do_copy
+
+ALIGN 4
+L_do_copy:
+ mov ecx, eax
+ rep movsb
+
+ mov esi, [esp+8] /* move in back to %esi, toss from */
+ mov ebp, [esp+32] /* ebp = lcode */
+ jmp L_while_test
+
+L_test_for_end_of_block:
+ test al, 32
+ jz L_invalid_literal_length_code
+ mov dword ptr [esp+72], 1
+ jmp L_break_loop_with_status
+
+L_invalid_literal_length_code:
+ mov dword ptr [esp+72], 2
+ jmp L_break_loop_with_status
+
+L_invalid_distance_code:
+ mov dword ptr [esp+72], 3
+ jmp L_break_loop_with_status
+
+L_invalid_distance_too_far:
+ mov esi, [esp+4]
+ mov dword ptr [esp+72], 4
+ jmp L_break_loop_with_status
+
+L_break_loop:
+ mov dword ptr [esp+72], 0
+
+L_break_loop_with_status:
+/* put in, out, bits, and hold back into ar and pop esp */
+ mov [esp+8], esi /* save in */
+ mov [esp+16], edi /* save out */
+ mov [esp+44], ebx /* save bits */
+ mov [esp+40], edx /* save hold */
+ mov ebp, [esp+4] /* restore esp, ebp */
+ mov esp, [esp]
+ }
+#else
+#error "x86 architecture not defined"
+#endif
+
+ if (ar.status > 1) {
+ if (ar.status == 2)
+ strm->msg = "invalid literal/length code";
+ else if (ar.status == 3)
+ strm->msg = "invalid distance code";
+ else
+ strm->msg = "invalid distance too far back";
+ state->mode = BAD;
+ }
+ else if ( ar.status == 1 ) {
+ state->mode = TYPE;
+ }
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ ar.len = ar.bits >> 3;
+ ar.in -= ar.len;
+ ar.bits -= ar.len << 3;
+ ar.hold &= (1U << ar.bits) - 1;
+
+ /* update state and return */
+ strm->next_in = ar.in;
+ strm->next_out = ar.out;
+ strm->avail_in = (unsigned)(ar.in < ar.last ?
+ PAD_AVAIL_IN + (ar.last - ar.in) :
+ PAD_AVAIL_IN - (ar.in - ar.last));
+ strm->avail_out = (unsigned)(ar.out < ar.end ?
+ PAD_AVAIL_OUT + (ar.end - ar.out) :
+ PAD_AVAIL_OUT - (ar.out - ar.end));
+ state->hold = ar.hold;
+ state->bits = ar.bits;
+ return;
+}
+
--- /dev/null
+/*
+ * inffast.S is a hand tuned assembler version of:
+ *
+ * inffast.c -- fast decoding
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * This version (Jan-23-2003) of inflate_fast was coded and tested under
+ * GNU/Linux on a pentium 3, using the gcc-3.2 compiler distribution. On that
+ * machine, I found that gzip style archives decompressed about 20% faster than
+ * the gcc-3.2 -O3 -fomit-frame-pointer compiled version. Your results will
+ * depend on how large of a buffer is used for z_stream.next_in & next_out
+ * (8K-32K worked best for my 256K cpu cache) and how much overhead there is in
+ * stream processing I/O and crc32/addler32. In my case, this routine used
+ * 70% of the cpu time and crc32 used 20%.
+ *
+ * I am confident that this version will work in the general case, but I have
+ * not tested a wide variety of datasets or a wide variety of platforms.
+ *
+ * Jan-24-2003 -- Added -DUSE_MMX define for slightly faster inflating.
+ * It should be a runtime flag instead of compile time flag...
+ *
+ * Jan-26-2003 -- Added runtime check for MMX support with cpuid instruction.
+ * With -DUSE_MMX, only MMX code is compiled. With -DNO_MMX, only non-MMX code
+ * is compiled. Without either option, runtime detection is enabled. Runtime
+ * detection should work on all modern cpus and the recomended algorithm (flip
+ * ID bit on eflags and then use the cpuid instruction) is used in many
+ * multimedia applications. Tested under win2k with gcc-2.95 and gas-2.12
+ * distributed with cygwin3. Compiling with gcc-2.95 -c inffast.S -o
+ * inffast.obj generates a COFF object which can then be linked with MSVC++
+ * compiled code. Tested under FreeBSD 4.7 with gcc-2.95.
+ *
+ * Jan-28-2003 -- Tested Athlon XP... MMX mode is slower than no MMX (and
+ * slower than compiler generated code). Adjusted cpuid check to use the MMX
+ * code only for Pentiums < P4 until I have more data on the P4. Speed
+ * improvment is only about 15% on the Athlon when compared with code generated
+ * with MSVC++. Not sure yet, but I think the P4 will also be slower using the
+ * MMX mode because many of it's x86 ALU instructions execute in .5 cycles and
+ * have less latency than MMX ops. Added code to buffer the last 11 bytes of
+ * the input stream since the MMX code grabs bits in chunks of 32, which
+ * differs from the inffast.c algorithm. I don't think there would have been
+ * read overruns where a page boundary was crossed (a segfault), but there
+ * could have been overruns when next_in ends on unaligned memory (unintialized
+ * memory read).
+ *
+ * Mar-13-2003 -- P4 MMX is slightly slower than P4 NO_MMX. I created a C
+ * version of the non-MMX code so that it doesn't depend on zstrm and zstate
+ * structure offsets which are hard coded in this file. This was last tested
+ * with zlib-1.2.0 which is currently in beta testing, newer versions of this
+ * and inffas86.c can be found at http://www.eetbeetee.com/zlib/ and
+ * http://www.charm.net/~christop/zlib/
+ */
+
+
+/*
+ * if you have underscore linking problems (_inflate_fast undefined), try
+ * using -DGAS_COFF
+ */
+#if ! defined( GAS_COFF ) && ! defined( GAS_ELF )
+
+#if defined( WIN32 ) || defined( __CYGWIN__ )
+#define GAS_COFF /* windows object format */
+#else
+#define GAS_ELF
+#endif
+
+#endif /* ! GAS_COFF && ! GAS_ELF */
+
+
+#if defined( GAS_COFF )
+
+/* coff externals have underscores */
+#define inflate_fast _inflate_fast
+#define inflate_fast_use_mmx _inflate_fast_use_mmx
+
+#endif /* GAS_COFF */
+
+
+.file "inffast.S"
+
+.globl inflate_fast
+
+.text
+.align 4,0
+.L_invalid_literal_length_code_msg:
+.string "invalid literal/length code"
+
+.align 4,0
+.L_invalid_distance_code_msg:
+.string "invalid distance code"
+
+.align 4,0
+.L_invalid_distance_too_far_msg:
+.string "invalid distance too far back"
+
+#if ! defined( NO_MMX )
+.align 4,0
+.L_mask: /* mask[N] = ( 1 << N ) - 1 */
+.long 0
+.long 1
+.long 3
+.long 7
+.long 15
+.long 31
+.long 63
+.long 127
+.long 255
+.long 511
+.long 1023
+.long 2047
+.long 4095
+.long 8191
+.long 16383
+.long 32767
+.long 65535
+.long 131071
+.long 262143
+.long 524287
+.long 1048575
+.long 2097151
+.long 4194303
+.long 8388607
+.long 16777215
+.long 33554431
+.long 67108863
+.long 134217727
+.long 268435455
+.long 536870911
+.long 1073741823
+.long 2147483647
+.long 4294967295
+#endif /* NO_MMX */
+
+.text
+
+/*
+ * struct z_stream offsets, in zlib.h
+ */
+#define next_in_strm 0 /* strm->next_in */
+#define avail_in_strm 4 /* strm->avail_in */
+#define next_out_strm 12 /* strm->next_out */
+#define avail_out_strm 16 /* strm->avail_out */
+#define msg_strm 24 /* strm->msg */
+#define state_strm 28 /* strm->state */
+
+/*
+ * struct inflate_state offsets, in inflate.h
+ */
+#define mode_state 0 /* state->mode */
+#define wsize_state 32 /* state->wsize */
+#define write_state 40 /* state->write */
+#define window_state 44 /* state->window */
+#define hold_state 48 /* state->hold */
+#define bits_state 52 /* state->bits */
+#define lencode_state 68 /* state->lencode */
+#define distcode_state 72 /* state->distcode */
+#define lenbits_state 76 /* state->lenbits */
+#define distbits_state 80 /* state->distbits */
+
+/*
+ * inflate_fast's activation record
+ */
+#define local_var_size 64 /* how much local space for vars */
+#define strm_sp 88 /* first arg: z_stream * (local_var_size + 24) */
+#define start_sp 92 /* second arg: unsigned int (local_var_size + 28) */
+
+/*
+ * offsets for local vars on stack
+ */
+#define out 60 /* unsigned char* */
+#define window 56 /* unsigned char* */
+#define wsize 52 /* unsigned int */
+#define write 48 /* unsigned int */
+#define in 44 /* unsigned char* */
+#define beg 40 /* unsigned char* */
+#define buf 28 /* char[ 12 ] */
+#define len 24 /* unsigned int */
+#define last 20 /* unsigned char* */
+#define end 16 /* unsigned char* */
+#define dcode 12 /* code* */
+#define lcode 8 /* code* */
+#define dmask 4 /* unsigned int */
+#define lmask 0 /* unsigned int */
+
+/*
+ * typedef enum inflate_mode consts, in inflate.h
+ */
+#define INFLATE_MODE_TYPE 11 /* state->mode flags enum-ed in inflate.h */
+#define INFLATE_MODE_BAD 26
+
+
+#if ! defined( USE_MMX ) && ! defined( NO_MMX )
+
+#define RUN_TIME_MMX
+
+#define CHECK_MMX 1
+#define DO_USE_MMX 2
+#define DONT_USE_MMX 3
+
+.globl inflate_fast_use_mmx
+
+.data
+
+.align 4,0
+inflate_fast_use_mmx: /* integer flag for run time control 1=check,2=mmx,3=no */
+.long CHECK_MMX
+
+#if defined( GAS_ELF )
+/* elf info */
+.type inflate_fast_use_mmx,@object
+.size inflate_fast_use_mmx,4
+#endif
+
+#endif /* RUN_TIME_MMX */
+
+#if defined( GAS_COFF )
+/* coff info: scl 2 = extern, type 32 = function */
+.def inflate_fast; .scl 2; .type 32; .endef
+#endif
+
+.text
+
+.align 32,0x90
+inflate_fast:
+ pushl %edi
+ pushl %esi
+ pushl %ebp
+ pushl %ebx
+ pushf /* save eflags (strm_sp, state_sp assumes this is 32 bits) */
+ subl $local_var_size, %esp
+ cld
+
+#define strm_r %esi
+#define state_r %edi
+
+ movl strm_sp(%esp), strm_r
+ movl state_strm(strm_r), state_r
+
+ /* in = strm->next_in;
+ * out = strm->next_out;
+ * last = in + strm->avail_in - 11;
+ * beg = out - (start - strm->avail_out);
+ * end = out + (strm->avail_out - 257);
+ */
+ movl avail_in_strm(strm_r), %edx
+ movl next_in_strm(strm_r), %eax
+
+ addl %eax, %edx /* avail_in += next_in */
+ subl $11, %edx /* avail_in -= 11 */
+
+ movl %eax, in(%esp)
+ movl %edx, last(%esp)
+
+ movl start_sp(%esp), %ebp
+ movl avail_out_strm(strm_r), %ecx
+ movl next_out_strm(strm_r), %ebx
+
+ subl %ecx, %ebp /* start -= avail_out */
+ negl %ebp /* start = -start */
+ addl %ebx, %ebp /* start += next_out */
+
+ subl $257, %ecx /* avail_out -= 257 */
+ addl %ebx, %ecx /* avail_out += out */
+
+ movl %ebx, out(%esp)
+ movl %ebp, beg(%esp)
+ movl %ecx, end(%esp)
+
+ /* wsize = state->wsize;
+ * write = state->write;
+ * window = state->window;
+ * hold = state->hold;
+ * bits = state->bits;
+ * lcode = state->lencode;
+ * dcode = state->distcode;
+ * lmask = ( 1 << state->lenbits ) - 1;
+ * dmask = ( 1 << state->distbits ) - 1;
+ */
+
+ movl lencode_state(state_r), %eax
+ movl distcode_state(state_r), %ecx
+
+ movl %eax, lcode(%esp)
+ movl %ecx, dcode(%esp)
+
+ movl $1, %eax
+ movl lenbits_state(state_r), %ecx
+ shll %cl, %eax
+ decl %eax
+ movl %eax, lmask(%esp)
+
+ movl $1, %eax
+ movl distbits_state(state_r), %ecx
+ shll %cl, %eax
+ decl %eax
+ movl %eax, dmask(%esp)
+
+ movl wsize_state(state_r), %eax
+ movl write_state(state_r), %ecx
+ movl window_state(state_r), %edx
+
+ movl %eax, wsize(%esp)
+ movl %ecx, write(%esp)
+ movl %edx, window(%esp)
+
+ movl hold_state(state_r), %ebp
+ movl bits_state(state_r), %ebx
+
+#undef strm_r
+#undef state_r
+
+#define in_r %esi
+#define from_r %esi
+#define out_r %edi
+
+ movl in(%esp), in_r
+ movl last(%esp), %ecx
+ cmpl in_r, %ecx
+ ja .L_align_long /* if in < last */
+
+ addl $11, %ecx /* ecx = &in[ avail_in ] */
+ subl in_r, %ecx /* ecx = avail_in */
+ movl $12, %eax
+ subl %ecx, %eax /* eax = 12 - avail_in */
+ leal buf(%esp), %edi
+ rep movsb /* memcpy( buf, in, avail_in ) */
+ movl %eax, %ecx
+ xorl %eax, %eax
+ rep stosb /* memset( &buf[ avail_in ], 0, 12 - avail_in ) */
+ leal buf(%esp), in_r /* in = buf */
+ movl in_r, last(%esp) /* last = in, do just one iteration */
+ jmp .L_is_aligned
+
+ /* align in_r on long boundary */
+.L_align_long:
+ testl $3, in_r
+ jz .L_is_aligned
+ xorl %eax, %eax
+ movb (in_r), %al
+ incl in_r
+ movl %ebx, %ecx
+ addl $8, %ebx
+ shll %cl, %eax
+ orl %eax, %ebp
+ jmp .L_align_long
+
+.L_is_aligned:
+ movl out(%esp), out_r
+
+#if defined( NO_MMX )
+ jmp .L_do_loop
+#endif
+
+#if defined( USE_MMX )
+ jmp .L_init_mmx
+#endif
+
+/*** Runtime MMX check ***/
+
+#if defined( RUN_TIME_MMX )
+.L_check_mmx:
+ cmpl $DO_USE_MMX, inflate_fast_use_mmx
+ je .L_init_mmx
+ ja .L_do_loop /* > 2 */
+
+ pushl %eax
+ pushl %ebx
+ pushl %ecx
+ pushl %edx
+ pushf
+ movl (%esp), %eax /* copy eflags to eax */
+ xorl $0x200000, (%esp) /* try toggling ID bit of eflags (bit 21)
+ * to see if cpu supports cpuid...
+ * ID bit method not supported by NexGen but
+ * bios may load a cpuid instruction and
+ * cpuid may be disabled on Cyrix 5-6x86 */
+ popf
+ pushf
+ popl %edx /* copy new eflags to edx */
+ xorl %eax, %edx /* test if ID bit is flipped */
+ jz .L_dont_use_mmx /* not flipped if zero */
+ xorl %eax, %eax
+ cpuid
+ cmpl $0x756e6547, %ebx /* check for GenuineIntel in ebx,ecx,edx */
+ jne .L_dont_use_mmx
+ cmpl $0x6c65746e, %ecx
+ jne .L_dont_use_mmx
+ cmpl $0x49656e69, %edx
+ jne .L_dont_use_mmx
+ movl $1, %eax
+ cpuid /* get cpu features */
+ shrl $8, %eax
+ andl $15, %eax
+ cmpl $6, %eax /* check for Pentium family, is 0xf for P4 */
+ jne .L_dont_use_mmx
+ testl $0x800000, %edx /* test if MMX feature is set (bit 23) */
+ jnz .L_use_mmx
+ jmp .L_dont_use_mmx
+.L_use_mmx:
+ movl $DO_USE_MMX, inflate_fast_use_mmx
+ jmp .L_check_mmx_pop
+.L_dont_use_mmx:
+ movl $DONT_USE_MMX, inflate_fast_use_mmx
+.L_check_mmx_pop:
+ popl %edx
+ popl %ecx
+ popl %ebx
+ popl %eax
+ jmp .L_check_mmx
+#endif
+
+
+/*** Non-MMX code ***/
+
+#if defined ( NO_MMX ) || defined( RUN_TIME_MMX )
+
+#define hold_r %ebp
+#define bits_r %bl
+#define bitslong_r %ebx
+
+.align 32,0x90
+.L_while_test:
+ /* while (in < last && out < end)
+ */
+ cmpl out_r, end(%esp)
+ jbe .L_break_loop /* if (out >= end) */
+
+ cmpl in_r, last(%esp)
+ jbe .L_break_loop
+
+.L_do_loop:
+ /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out
+ *
+ * do {
+ * if (bits < 15) {
+ * hold |= *((unsigned short *)in)++ << bits;
+ * bits += 16
+ * }
+ * this = lcode[hold & lmask]
+ */
+ cmpb $15, bits_r
+ ja .L_get_length_code /* if (15 < bits) */
+
+ xorl %eax, %eax
+ lodsw /* al = *(ushort *)in++ */
+ movb bits_r, %cl /* cl = bits, needs it for shifting */
+ addb $16, bits_r /* bits += 16 */
+ shll %cl, %eax
+ orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */
+
+.L_get_length_code:
+ movl lmask(%esp), %edx /* edx = lmask */
+ movl lcode(%esp), %ecx /* ecx = lcode */
+ andl hold_r, %edx /* edx &= hold */
+ movl (%ecx,%edx,4), %eax /* eax = lcode[hold & lmask] */
+
+.L_dolen:
+ /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out
+ *
+ * dolen:
+ * bits -= this.bits;
+ * hold >>= this.bits
+ */
+ movb %ah, %cl /* cl = this.bits */
+ subb %ah, bits_r /* bits -= this.bits */
+ shrl %cl, hold_r /* hold >>= this.bits */
+
+ /* check if op is a literal
+ * if (op == 0) {
+ * PUP(out) = this.val;
+ * }
+ */
+ testb %al, %al
+ jnz .L_test_for_length_base /* if (op != 0) 45.7% */
+
+ shrl $16, %eax /* output this.val char */
+ stosb
+ jmp .L_while_test
+
+.L_test_for_length_base:
+ /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = len
+ *
+ * else if (op & 16) {
+ * len = this.val
+ * op &= 15
+ * if (op) {
+ * if (op > bits) {
+ * hold |= *((unsigned short *)in)++ << bits;
+ * bits += 16
+ * }
+ * len += hold & mask[op];
+ * bits -= op;
+ * hold >>= op;
+ * }
+ */
+#define len_r %edx
+ movl %eax, len_r /* len = this */
+ shrl $16, len_r /* len = this.val */
+ movb %al, %cl
+
+ testb $16, %al
+ jz .L_test_for_second_level_length /* if ((op & 16) == 0) 8% */
+ andb $15, %cl /* op &= 15 */
+ jz .L_save_len /* if (!op) */
+ cmpb %cl, bits_r
+ jae .L_add_bits_to_len /* if (op <= bits) */
+
+ movb %cl, %ch /* stash op in ch, freeing cl */
+ xorl %eax, %eax
+ lodsw /* al = *(ushort *)in++ */
+ movb bits_r, %cl /* cl = bits, needs it for shifting */
+ addb $16, bits_r /* bits += 16 */
+ shll %cl, %eax
+ orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */
+ movb %ch, %cl /* move op back to ecx */
+
+.L_add_bits_to_len:
+ movl $1, %eax
+ shll %cl, %eax
+ decl %eax
+ subb %cl, bits_r
+ andl hold_r, %eax /* eax &= hold */
+ shrl %cl, hold_r
+ addl %eax, len_r /* len += hold & mask[op] */
+
+.L_save_len:
+ movl len_r, len(%esp) /* save len */
+#undef len_r
+
+.L_decode_distance:
+ /* regs: %esi = in, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ *
+ * if (bits < 15) {
+ * hold |= *((unsigned short *)in)++ << bits;
+ * bits += 16
+ * }
+ * this = dcode[hold & dmask];
+ * dodist:
+ * bits -= this.bits;
+ * hold >>= this.bits;
+ * op = this.op;
+ */
+
+ cmpb $15, bits_r
+ ja .L_get_distance_code /* if (15 < bits) */
+
+ xorl %eax, %eax
+ lodsw /* al = *(ushort *)in++ */
+ movb bits_r, %cl /* cl = bits, needs it for shifting */
+ addb $16, bits_r /* bits += 16 */
+ shll %cl, %eax
+ orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */
+
+.L_get_distance_code:
+ movl dmask(%esp), %edx /* edx = dmask */
+ movl dcode(%esp), %ecx /* ecx = dcode */
+ andl hold_r, %edx /* edx &= hold */
+ movl (%ecx,%edx,4), %eax /* eax = dcode[hold & dmask] */
+
+#define dist_r %edx
+.L_dodist:
+ movl %eax, dist_r /* dist = this */
+ shrl $16, dist_r /* dist = this.val */
+ movb %ah, %cl
+ subb %ah, bits_r /* bits -= this.bits */
+ shrl %cl, hold_r /* hold >>= this.bits */
+
+ /* if (op & 16) {
+ * dist = this.val
+ * op &= 15
+ * if (op > bits) {
+ * hold |= *((unsigned short *)in)++ << bits;
+ * bits += 16
+ * }
+ * dist += hold & mask[op];
+ * bits -= op;
+ * hold >>= op;
+ */
+ movb %al, %cl /* cl = this.op */
+
+ testb $16, %al /* if ((op & 16) == 0) */
+ jz .L_test_for_second_level_dist
+ andb $15, %cl /* op &= 15 */
+ jz .L_check_dist_one
+ cmpb %cl, bits_r
+ jae .L_add_bits_to_dist /* if (op <= bits) 97.6% */
+
+ movb %cl, %ch /* stash op in ch, freeing cl */
+ xorl %eax, %eax
+ lodsw /* al = *(ushort *)in++ */
+ movb bits_r, %cl /* cl = bits, needs it for shifting */
+ addb $16, bits_r /* bits += 16 */
+ shll %cl, %eax
+ orl %eax, hold_r /* hold |= *((ushort *)in)++ << bits */
+ movb %ch, %cl /* move op back to ecx */
+
+.L_add_bits_to_dist:
+ movl $1, %eax
+ shll %cl, %eax
+ decl %eax /* (1 << op) - 1 */
+ subb %cl, bits_r
+ andl hold_r, %eax /* eax &= hold */
+ shrl %cl, hold_r
+ addl %eax, dist_r /* dist += hold & ((1 << op) - 1) */
+ jmp .L_check_window
+
+.L_check_window:
+ /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ * %ecx = nbytes
+ *
+ * nbytes = out - beg;
+ * if (dist <= nbytes) {
+ * from = out - dist;
+ * do {
+ * PUP(out) = PUP(from);
+ * } while (--len > 0) {
+ * }
+ */
+
+ movl in_r, in(%esp) /* save in so from can use it's reg */
+ movl out_r, %eax
+ subl beg(%esp), %eax /* nbytes = out - beg */
+
+ cmpl dist_r, %eax
+ jb .L_clip_window /* if (dist > nbytes) 4.2% */
+
+ movl len(%esp), %ecx
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+
+ subl $3, %ecx
+ movb (from_r), %al
+ movb %al, (out_r)
+ movb 1(from_r), %al
+ movb 2(from_r), %dl
+ addl $3, from_r
+ movb %al, 1(out_r)
+ movb %dl, 2(out_r)
+ addl $3, out_r
+ rep movsb
+
+ movl in(%esp), in_r /* move in back to %esi, toss from */
+ jmp .L_while_test
+
+.align 16,0x90
+.L_check_dist_one:
+ cmpl $1, dist_r
+ jne .L_check_window
+ cmpl out_r, beg(%esp)
+ je .L_check_window
+
+ decl out_r
+ movl len(%esp), %ecx
+ movb (out_r), %al
+ subl $3, %ecx
+
+ movb %al, 1(out_r)
+ movb %al, 2(out_r)
+ movb %al, 3(out_r)
+ addl $4, out_r
+ rep stosb
+
+ jmp .L_while_test
+
+.align 16,0x90
+.L_test_for_second_level_length:
+ /* else if ((op & 64) == 0) {
+ * this = lcode[this.val + (hold & mask[op])];
+ * }
+ */
+ testb $64, %al
+ jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */
+
+ movl $1, %eax
+ shll %cl, %eax
+ decl %eax
+ andl hold_r, %eax /* eax &= hold */
+ addl %edx, %eax /* eax += this.val */
+ movl lcode(%esp), %edx /* edx = lcode */
+ movl (%edx,%eax,4), %eax /* eax = lcode[val + (hold&mask[op])] */
+ jmp .L_dolen
+
+.align 16,0x90
+.L_test_for_second_level_dist:
+ /* else if ((op & 64) == 0) {
+ * this = dcode[this.val + (hold & mask[op])];
+ * }
+ */
+ testb $64, %al
+ jnz .L_invalid_distance_code /* if ((op & 64) != 0) */
+
+ movl $1, %eax
+ shll %cl, %eax
+ decl %eax
+ andl hold_r, %eax /* eax &= hold */
+ addl %edx, %eax /* eax += this.val */
+ movl dcode(%esp), %edx /* edx = dcode */
+ movl (%edx,%eax,4), %eax /* eax = dcode[val + (hold&mask[op])] */
+ jmp .L_dodist
+
+.align 16,0x90
+.L_clip_window:
+ /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ * %ecx = nbytes
+ *
+ * else {
+ * if (dist > wsize) {
+ * invalid distance
+ * }
+ * from = window;
+ * nbytes = dist - nbytes;
+ * if (write == 0) {
+ * from += wsize - nbytes;
+ */
+#define nbytes_r %ecx
+ movl %eax, nbytes_r
+ movl wsize(%esp), %eax /* prepare for dist compare */
+ negl nbytes_r /* nbytes = -nbytes */
+ movl window(%esp), from_r /* from = window */
+
+ cmpl dist_r, %eax
+ jb .L_invalid_distance_too_far /* if (dist > wsize) */
+
+ addl dist_r, nbytes_r /* nbytes = dist - nbytes */
+ cmpl $0, write(%esp)
+ jne .L_wrap_around_window /* if (write != 0) */
+
+ subl nbytes_r, %eax
+ addl %eax, from_r /* from += wsize - nbytes */
+
+ /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ * %ecx = nbytes, %eax = len
+ *
+ * if (nbytes < len) {
+ * len -= nbytes;
+ * do {
+ * PUP(out) = PUP(from);
+ * } while (--nbytes);
+ * from = out - dist;
+ * }
+ * }
+ */
+#define len_r %eax
+ movl len(%esp), len_r
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1 /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1
+
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1 /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1
+
+.L_wrap_around_window:
+ /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ * %ecx = nbytes, %eax = write, %eax = len
+ *
+ * else if (write < nbytes) {
+ * from += wsize + write - nbytes;
+ * nbytes -= write;
+ * if (nbytes < len) {
+ * len -= nbytes;
+ * do {
+ * PUP(out) = PUP(from);
+ * } while (--nbytes);
+ * from = window;
+ * nbytes = write;
+ * if (nbytes < len) {
+ * len -= nbytes;
+ * do {
+ * PUP(out) = PUP(from);
+ * } while(--nbytes);
+ * from = out - dist;
+ * }
+ * }
+ * }
+ */
+#define write_r %eax
+ movl write(%esp), write_r
+ cmpl write_r, nbytes_r
+ jbe .L_contiguous_in_window /* if (write >= nbytes) */
+
+ addl wsize(%esp), from_r
+ addl write_r, from_r
+ subl nbytes_r, from_r /* from += wsize + write - nbytes */
+ subl write_r, nbytes_r /* nbytes -= write */
+#undef write_r
+
+ movl len(%esp), len_r
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1 /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl window(%esp), from_r /* from = window */
+ movl write(%esp), nbytes_r /* nbytes = write */
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1 /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1
+
+.L_contiguous_in_window:
+ /* regs: %esi = from, %ebp = hold, %bl = bits, %edi = out, %edx = dist
+ * %ecx = nbytes, %eax = write, %eax = len
+ *
+ * else {
+ * from += write - nbytes;
+ * if (nbytes < len) {
+ * len -= nbytes;
+ * do {
+ * PUP(out) = PUP(from);
+ * } while (--nbytes);
+ * from = out - dist;
+ * }
+ * }
+ */
+#define write_r %eax
+ addl write_r, from_r
+ subl nbytes_r, from_r /* from += write - nbytes */
+#undef write_r
+
+ movl len(%esp), len_r
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1 /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+
+.L_do_copy1:
+ /* regs: %esi = from, %esi = in, %ebp = hold, %bl = bits, %edi = out
+ * %eax = len
+ *
+ * while (len > 0) {
+ * PUP(out) = PUP(from);
+ * len--;
+ * }
+ * }
+ * } while (in < last && out < end);
+ */
+#undef nbytes_r
+#define in_r %esi
+ movl len_r, %ecx
+ rep movsb
+
+ movl in(%esp), in_r /* move in back to %esi, toss from */
+ jmp .L_while_test
+
+#undef len_r
+#undef dist_r
+
+#endif /* NO_MMX || RUN_TIME_MMX */
+
+
+/*** MMX code ***/
+
+#if defined( USE_MMX ) || defined( RUN_TIME_MMX )
+
+.align 32,0x90
+.L_init_mmx:
+ emms
+
+#undef bits_r
+#undef bitslong_r
+#define bitslong_r %ebp
+#define hold_mm %mm0
+ movd %ebp, hold_mm
+ movl %ebx, bitslong_r
+
+#define used_mm %mm1
+#define dmask2_mm %mm2
+#define lmask2_mm %mm3
+#define lmask_mm %mm4
+#define dmask_mm %mm5
+#define tmp_mm %mm6
+
+ movd lmask(%esp), lmask_mm
+ movq lmask_mm, lmask2_mm
+ movd dmask(%esp), dmask_mm
+ movq dmask_mm, dmask2_mm
+ pxor used_mm, used_mm
+ movl lcode(%esp), %ebx /* ebx = lcode */
+ jmp .L_do_loop_mmx
+
+.align 32,0x90
+.L_while_test_mmx:
+ /* while (in < last && out < end)
+ */
+ cmpl out_r, end(%esp)
+ jbe .L_break_loop /* if (out >= end) */
+
+ cmpl in_r, last(%esp)
+ jbe .L_break_loop
+
+.L_do_loop_mmx:
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+
+ cmpl $32, bitslong_r
+ ja .L_get_length_code_mmx /* if (32 < bits) */
+
+ movd bitslong_r, tmp_mm
+ movd (in_r), %mm7
+ addl $4, in_r
+ psllq tmp_mm, %mm7
+ addl $32, bitslong_r
+ por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */
+
+.L_get_length_code_mmx:
+ pand hold_mm, lmask_mm
+ movd lmask_mm, %eax
+ movq lmask2_mm, lmask_mm
+ movl (%ebx,%eax,4), %eax /* eax = lcode[hold & lmask] */
+
+.L_dolen_mmx:
+ movzbl %ah, %ecx /* ecx = this.bits */
+ movd %ecx, used_mm
+ subl %ecx, bitslong_r /* bits -= this.bits */
+
+ testb %al, %al
+ jnz .L_test_for_length_base_mmx /* if (op != 0) 45.7% */
+
+ shrl $16, %eax /* output this.val char */
+ stosb
+ jmp .L_while_test_mmx
+
+.L_test_for_length_base_mmx:
+#define len_r %edx
+ movl %eax, len_r /* len = this */
+ shrl $16, len_r /* len = this.val */
+
+ testb $16, %al
+ jz .L_test_for_second_level_length_mmx /* if ((op & 16) == 0) 8% */
+ andl $15, %eax /* op &= 15 */
+ jz .L_decode_distance_mmx /* if (!op) */
+
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+ movd %eax, used_mm
+ movd hold_mm, %ecx
+ subl %eax, bitslong_r
+ andl .L_mask(,%eax,4), %ecx
+ addl %ecx, len_r /* len += hold & mask[op] */
+
+.L_decode_distance_mmx:
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+
+ cmpl $32, bitslong_r
+ ja .L_get_dist_code_mmx /* if (32 < bits) */
+
+ movd bitslong_r, tmp_mm
+ movd (in_r), %mm7
+ addl $4, in_r
+ psllq tmp_mm, %mm7
+ addl $32, bitslong_r
+ por %mm7, hold_mm /* hold_mm |= *((uint *)in)++ << bits */
+
+.L_get_dist_code_mmx:
+ movl dcode(%esp), %ebx /* ebx = dcode */
+ pand hold_mm, dmask_mm
+ movd dmask_mm, %eax
+ movq dmask2_mm, dmask_mm
+ movl (%ebx,%eax,4), %eax /* eax = dcode[hold & lmask] */
+
+.L_dodist_mmx:
+#define dist_r %ebx
+ movzbl %ah, %ecx /* ecx = this.bits */
+ movl %eax, dist_r
+ shrl $16, dist_r /* dist = this.val */
+ subl %ecx, bitslong_r /* bits -= this.bits */
+ movd %ecx, used_mm
+
+ testb $16, %al /* if ((op & 16) == 0) */
+ jz .L_test_for_second_level_dist_mmx
+ andl $15, %eax /* op &= 15 */
+ jz .L_check_dist_one_mmx
+
+.L_add_bits_to_dist_mmx:
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+ movd %eax, used_mm /* save bit length of current op */
+ movd hold_mm, %ecx /* get the next bits on input stream */
+ subl %eax, bitslong_r /* bits -= op bits */
+ andl .L_mask(,%eax,4), %ecx /* ecx = hold & mask[op] */
+ addl %ecx, dist_r /* dist += hold & mask[op] */
+
+.L_check_window_mmx:
+ movl in_r, in(%esp) /* save in so from can use it's reg */
+ movl out_r, %eax
+ subl beg(%esp), %eax /* nbytes = out - beg */
+
+ cmpl dist_r, %eax
+ jb .L_clip_window_mmx /* if (dist > nbytes) 4.2% */
+
+ movl len_r, %ecx
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+
+ subl $3, %ecx
+ movb (from_r), %al
+ movb %al, (out_r)
+ movb 1(from_r), %al
+ movb 2(from_r), %dl
+ addl $3, from_r
+ movb %al, 1(out_r)
+ movb %dl, 2(out_r)
+ addl $3, out_r
+ rep movsb
+
+ movl in(%esp), in_r /* move in back to %esi, toss from */
+ movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */
+ jmp .L_while_test_mmx
+
+.align 16,0x90
+.L_check_dist_one_mmx:
+ cmpl $1, dist_r
+ jne .L_check_window_mmx
+ cmpl out_r, beg(%esp)
+ je .L_check_window_mmx
+
+ decl out_r
+ movl len_r, %ecx
+ movb (out_r), %al
+ subl $3, %ecx
+
+ movb %al, 1(out_r)
+ movb %al, 2(out_r)
+ movb %al, 3(out_r)
+ addl $4, out_r
+ rep stosb
+
+ movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */
+ jmp .L_while_test_mmx
+
+.align 16,0x90
+.L_test_for_second_level_length_mmx:
+ testb $64, %al
+ jnz .L_test_for_end_of_block /* if ((op & 64) != 0) */
+
+ andl $15, %eax
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+ movd hold_mm, %ecx
+ andl .L_mask(,%eax,4), %ecx
+ addl len_r, %ecx
+ movl (%ebx,%ecx,4), %eax /* eax = lcode[hold & lmask] */
+ jmp .L_dolen_mmx
+
+.align 16,0x90
+.L_test_for_second_level_dist_mmx:
+ testb $64, %al
+ jnz .L_invalid_distance_code /* if ((op & 64) != 0) */
+
+ andl $15, %eax
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+ movd hold_mm, %ecx
+ andl .L_mask(,%eax,4), %ecx
+ movl dcode(%esp), %eax /* ecx = dcode */
+ addl dist_r, %ecx
+ movl (%eax,%ecx,4), %eax /* eax = lcode[hold & lmask] */
+ jmp .L_dodist_mmx
+
+.align 16,0x90
+.L_clip_window_mmx:
+#define nbytes_r %ecx
+ movl %eax, nbytes_r
+ movl wsize(%esp), %eax /* prepare for dist compare */
+ negl nbytes_r /* nbytes = -nbytes */
+ movl window(%esp), from_r /* from = window */
+
+ cmpl dist_r, %eax
+ jb .L_invalid_distance_too_far /* if (dist > wsize) */
+
+ addl dist_r, nbytes_r /* nbytes = dist - nbytes */
+ cmpl $0, write(%esp)
+ jne .L_wrap_around_window_mmx /* if (write != 0) */
+
+ subl nbytes_r, %eax
+ addl %eax, from_r /* from += wsize - nbytes */
+
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1_mmx /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1_mmx
+
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1_mmx /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1_mmx
+
+.L_wrap_around_window_mmx:
+#define write_r %eax
+ movl write(%esp), write_r
+ cmpl write_r, nbytes_r
+ jbe .L_contiguous_in_window_mmx /* if (write >= nbytes) */
+
+ addl wsize(%esp), from_r
+ addl write_r, from_r
+ subl nbytes_r, from_r /* from += wsize + write - nbytes */
+ subl write_r, nbytes_r /* nbytes -= write */
+#undef write_r
+
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1_mmx /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl window(%esp), from_r /* from = window */
+ movl write(%esp), nbytes_r /* nbytes = write */
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1_mmx /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+ jmp .L_do_copy1_mmx
+
+.L_contiguous_in_window_mmx:
+#define write_r %eax
+ addl write_r, from_r
+ subl nbytes_r, from_r /* from += write - nbytes */
+#undef write_r
+
+ cmpl nbytes_r, len_r
+ jbe .L_do_copy1_mmx /* if (nbytes >= len) */
+
+ subl nbytes_r, len_r /* len -= nbytes */
+ rep movsb
+ movl out_r, from_r
+ subl dist_r, from_r /* from = out - dist */
+
+.L_do_copy1_mmx:
+#undef nbytes_r
+#define in_r %esi
+ movl len_r, %ecx
+ rep movsb
+
+ movl in(%esp), in_r /* move in back to %esi, toss from */
+ movl lcode(%esp), %ebx /* move lcode back to %ebx, toss dist */
+ jmp .L_while_test_mmx
+
+#undef hold_r
+#undef bitslong_r
+
+#endif /* USE_MMX || RUN_TIME_MMX */
+
+
+/*** USE_MMX, NO_MMX, and RUNTIME_MMX from here on ***/
+
+.L_invalid_distance_code:
+ /* else {
+ * strm->msg = "invalid distance code";
+ * state->mode = BAD;
+ * }
+ */
+ movl $.L_invalid_distance_code_msg, %ecx
+ movl $INFLATE_MODE_BAD, %edx
+ jmp .L_update_stream_state
+
+.L_test_for_end_of_block:
+ /* else if (op & 32) {
+ * state->mode = TYPE;
+ * break;
+ * }
+ */
+ testb $32, %al
+ jz .L_invalid_literal_length_code /* if ((op & 32) == 0) */
+
+ movl $0, %ecx
+ movl $INFLATE_MODE_TYPE, %edx
+ jmp .L_update_stream_state
+
+.L_invalid_literal_length_code:
+ /* else {
+ * strm->msg = "invalid literal/length code";
+ * state->mode = BAD;
+ * }
+ */
+ movl $.L_invalid_literal_length_code_msg, %ecx
+ movl $INFLATE_MODE_BAD, %edx
+ jmp .L_update_stream_state
+
+.L_invalid_distance_too_far:
+ /* strm->msg = "invalid distance too far back";
+ * state->mode = BAD;
+ */
+ movl in(%esp), in_r /* from_r has in's reg, put in back */
+ movl $.L_invalid_distance_too_far_msg, %ecx
+ movl $INFLATE_MODE_BAD, %edx
+ jmp .L_update_stream_state
+
+.L_update_stream_state:
+ /* set strm->msg = %ecx, strm->state->mode = %edx */
+ movl strm_sp(%esp), %eax
+ testl %ecx, %ecx /* if (msg != NULL) */
+ jz .L_skip_msg
+ movl %ecx, msg_strm(%eax) /* strm->msg = msg */
+.L_skip_msg:
+ movl state_strm(%eax), %eax /* state = strm->state */
+ movl %edx, mode_state(%eax) /* state->mode = edx (BAD | TYPE) */
+ jmp .L_break_loop
+
+.align 32,0x90
+.L_break_loop:
+
+/*
+ * Regs:
+ *
+ * bits = %ebp when mmx, and in %ebx when non-mmx
+ * hold = %hold_mm when mmx, and in %ebp when non-mmx
+ * in = %esi
+ * out = %edi
+ */
+
+#if defined( USE_MMX ) || defined( RUN_TIME_MMX )
+
+#if defined( RUN_TIME_MMX )
+
+ cmpl $DO_USE_MMX, inflate_fast_use_mmx
+ jne .L_update_next_in
+
+#endif /* RUN_TIME_MMX */
+
+ movl %ebp, %ebx
+
+.L_update_next_in:
+
+#endif
+
+#define strm_r %eax
+#define state_r %edx
+
+ /* len = bits >> 3;
+ * in -= len;
+ * bits -= len << 3;
+ * hold &= (1U << bits) - 1;
+ * state->hold = hold;
+ * state->bits = bits;
+ * strm->next_in = in;
+ * strm->next_out = out;
+ */
+ movl strm_sp(%esp), strm_r
+ movl %ebx, %ecx
+ movl state_strm(strm_r), state_r
+ shrl $3, %ecx
+ subl %ecx, in_r
+ shll $3, %ecx
+ subl %ecx, %ebx
+ movl out_r, next_out_strm(strm_r)
+ movl %ebx, bits_state(state_r)
+ movl %ebx, %ecx
+
+ leal buf(%esp), %ebx
+ cmpl %ebx, last(%esp)
+ jne .L_buf_not_used /* if buf != last */
+
+ subl %ebx, in_r /* in -= buf */
+ movl next_in_strm(strm_r), %ebx
+ movl %ebx, last(%esp) /* last = strm->next_in */
+ addl %ebx, in_r /* in += strm->next_in */
+ movl avail_in_strm(strm_r), %ebx
+ subl $11, %ebx
+ addl %ebx, last(%esp) /* last = &strm->next_in[ avail_in - 11 ] */
+
+.L_buf_not_used:
+ movl in_r, next_in_strm(strm_r)
+
+ movl $1, %ebx
+ shll %cl, %ebx
+ decl %ebx
+
+#if defined( USE_MMX ) || defined( RUN_TIME_MMX )
+
+#if defined( RUN_TIME_MMX )
+
+ cmpl $DO_USE_MMX, inflate_fast_use_mmx
+ jne .L_update_hold
+
+#endif /* RUN_TIME_MMX */
+
+ psrlq used_mm, hold_mm /* hold_mm >>= last bit length */
+ movd hold_mm, %ebp
+
+ emms
+
+.L_update_hold:
+
+#endif /* USE_MMX || RUN_TIME_MMX */
+
+ andl %ebx, %ebp
+ movl %ebp, hold_state(state_r)
+
+#define last_r %ebx
+
+ /* strm->avail_in = in < last ? 11 + (last - in) : 11 - (in - last) */
+ movl last(%esp), last_r
+ cmpl in_r, last_r
+ jbe .L_last_is_smaller /* if (in >= last) */
+
+ subl in_r, last_r /* last -= in */
+ addl $11, last_r /* last += 11 */
+ movl last_r, avail_in_strm(strm_r)
+ jmp .L_fixup_out
+.L_last_is_smaller:
+ subl last_r, in_r /* in -= last */
+ negl in_r /* in = -in */
+ addl $11, in_r /* in += 11 */
+ movl in_r, avail_in_strm(strm_r)
+
+#undef last_r
+#define end_r %ebx
+
+.L_fixup_out:
+ /* strm->avail_out = out < end ? 257 + (end - out) : 257 - (out - end)*/
+ movl end(%esp), end_r
+ cmpl out_r, end_r
+ jbe .L_end_is_smaller /* if (out >= end) */
+
+ subl out_r, end_r /* end -= out */
+ addl $257, end_r /* end += 257 */
+ movl end_r, avail_out_strm(strm_r)
+ jmp .L_done
+.L_end_is_smaller:
+ subl end_r, out_r /* out -= end */
+ negl out_r /* out = -out */
+ addl $257, out_r /* out += 257 */
+ movl out_r, avail_out_strm(strm_r)
+
+#undef end_r
+#undef strm_r
+#undef state_r
+
+.L_done:
+ addl $local_var_size, %esp
+ popf
+ popl %ebx
+ popl %ebp
+ popl %esi
+ popl %edi
+ ret
+
+#if defined( GAS_ELF )
+/* elf info */
+.type inflate_fast,@function
+.size inflate_fast,.-inflate_fast
+#endif
--- /dev/null
+
+#include "zfstream.h"
+
+int main() {
+
+ // Construct a stream object with this filebuffer. Anything sent
+ // to this stream will go to standard out.
+ gzofstream os( 1, ios::out );
+
+ // This text is getting compressed and sent to stdout.
+ // To prove this, run 'test | zcat'.
+ os << "Hello, Mommy" << endl;
+
+ os << setcompressionlevel( Z_NO_COMPRESSION );
+ os << "hello, hello, hi, ho!" << endl;
+
+ setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+ << "I'm compressing again" << endl;
+
+ os.close();
+
+ return 0;
+
+}
--- /dev/null
+
+#include "zfstream.h"
+
+gzfilebuf::gzfilebuf() :
+ file(NULL),
+ mode(0),
+ own_file_descriptor(0)
+{ }
+
+gzfilebuf::~gzfilebuf() {
+
+ sync();
+ if ( own_file_descriptor )
+ close();
+
+}
+
+gzfilebuf *gzfilebuf::open( const char *name,
+ int io_mode ) {
+
+ if ( is_open() )
+ return NULL;
+
+ char char_mode[10];
+ char *p = char_mode;
+
+ if ( io_mode & ios::in ) {
+ mode = ios::in;
+ *p++ = 'r';
+ } else if ( io_mode & ios::app ) {
+ mode = ios::app;
+ *p++ = 'a';
+ } else {
+ mode = ios::out;
+ *p++ = 'w';
+ }
+
+ if ( io_mode & ios::binary ) {
+ mode |= ios::binary;
+ *p++ = 'b';
+ }
+
+ // Hard code the compression level
+ if ( io_mode & (ios::out|ios::app )) {
+ *p++ = '9';
+ }
+
+ // Put the end-of-string indicator
+ *p = '\0';
+
+ if ( (file = gzopen(name, char_mode)) == NULL )
+ return NULL;
+
+ own_file_descriptor = 1;
+
+ return this;
+
+}
+
+gzfilebuf *gzfilebuf::attach( int file_descriptor,
+ int io_mode ) {
+
+ if ( is_open() )
+ return NULL;
+
+ char char_mode[10];
+ char *p = char_mode;
+
+ if ( io_mode & ios::in ) {
+ mode = ios::in;
+ *p++ = 'r';
+ } else if ( io_mode & ios::app ) {
+ mode = ios::app;
+ *p++ = 'a';
+ } else {
+ mode = ios::out;
+ *p++ = 'w';
+ }
+
+ if ( io_mode & ios::binary ) {
+ mode |= ios::binary;
+ *p++ = 'b';
+ }
+
+ // Hard code the compression level
+ if ( io_mode & (ios::out|ios::app )) {
+ *p++ = '9';
+ }
+
+ // Put the end-of-string indicator
+ *p = '\0';
+
+ if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
+ return NULL;
+
+ own_file_descriptor = 0;
+
+ return this;
+
+}
+
+gzfilebuf *gzfilebuf::close() {
+
+ if ( is_open() ) {
+
+ sync();
+ gzclose( file );
+ file = NULL;
+
+ }
+
+ return this;
+
+}
+
+int gzfilebuf::setcompressionlevel( int comp_level ) {
+
+ return gzsetparams(file, comp_level, -2);
+
+}
+
+int gzfilebuf::setcompressionstrategy( int comp_strategy ) {
+
+ return gzsetparams(file, -2, comp_strategy);
+
+}
+
+
+streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
+
+ return streampos(EOF);
+
+}
+
+int gzfilebuf::underflow() {
+
+ // If the file hasn't been opened for reading, error.
+ if ( !is_open() || !(mode & ios::in) )
+ return EOF;
+
+ // if a buffer doesn't exists, allocate one.
+ if ( !base() ) {
+
+ if ( (allocate()) == EOF )
+ return EOF;
+ setp(0,0);
+
+ } else {
+
+ if ( in_avail() )
+ return (unsigned char) *gptr();
+
+ if ( out_waiting() ) {
+ if ( flushbuf() == EOF )
+ return EOF;
+ }
+
+ }
+
+ // Attempt to fill the buffer.
+
+ int result = fillbuf();
+ if ( result == EOF ) {
+ // disable get area
+ setg(0,0,0);
+ return EOF;
+ }
+
+ return (unsigned char) *gptr();
+
+}
+
+int gzfilebuf::overflow( int c ) {
+
+ if ( !is_open() || !(mode & ios::out) )
+ return EOF;
+
+ if ( !base() ) {
+ if ( allocate() == EOF )
+ return EOF;
+ setg(0,0,0);
+ } else {
+ if (in_avail()) {
+ return EOF;
+ }
+ if (out_waiting()) {
+ if (flushbuf() == EOF)
+ return EOF;
+ }
+ }
+
+ int bl = blen();
+ setp( base(), base() + bl);
+
+ if ( c != EOF ) {
+
+ *pptr() = c;
+ pbump(1);
+
+ }
+
+ return 0;
+
+}
+
+int gzfilebuf::sync() {
+
+ if ( !is_open() )
+ return EOF;
+
+ if ( out_waiting() )
+ return flushbuf();
+
+ return 0;
+
+}
+
+int gzfilebuf::flushbuf() {
+
+ int n;
+ char *q;
+
+ q = pbase();
+ n = pptr() - q;
+
+ if ( gzwrite( file, q, n) < n )
+ return EOF;
+
+ setp(0,0);
+
+ return 0;
+
+}
+
+int gzfilebuf::fillbuf() {
+
+ int required;
+ char *p;
+
+ p = base();
+
+ required = blen();
+
+ int t = gzread( file, p, required );
+
+ if ( t <= 0) return EOF;
+
+ setg( base(), base(), base()+t);
+
+ return t;
+
+}
+
+gzfilestream_common::gzfilestream_common() :
+ ios( gzfilestream_common::rdbuf() )
+{ }
+
+gzfilestream_common::~gzfilestream_common()
+{ }
+
+void gzfilestream_common::attach( int fd, int io_mode ) {
+
+ if ( !buffer.attach( fd, io_mode) )
+ clear( ios::failbit | ios::badbit );
+ else
+ clear();
+
+}
+
+void gzfilestream_common::open( const char *name, int io_mode ) {
+
+ if ( !buffer.open( name, io_mode ) )
+ clear( ios::failbit | ios::badbit );
+ else
+ clear();
+
+}
+
+void gzfilestream_common::close() {
+
+ if ( !buffer.close() )
+ clear( ios::failbit | ios::badbit );
+
+}
+
+gzfilebuf *gzfilestream_common::rdbuf()
+{
+ return &buffer;
+}
+
+gzifstream::gzifstream() :
+ ios( gzfilestream_common::rdbuf() )
+{
+ clear( ios::badbit );
+}
+
+gzifstream::gzifstream( const char *name, int io_mode ) :
+ ios( gzfilestream_common::rdbuf() )
+{
+ gzfilestream_common::open( name, io_mode );
+}
+
+gzifstream::gzifstream( int fd, int io_mode ) :
+ ios( gzfilestream_common::rdbuf() )
+{
+ gzfilestream_common::attach( fd, io_mode );
+}
+
+gzifstream::~gzifstream() { }
+
+gzofstream::gzofstream() :
+ ios( gzfilestream_common::rdbuf() )
+{
+ clear( ios::badbit );
+}
+
+gzofstream::gzofstream( const char *name, int io_mode ) :
+ ios( gzfilestream_common::rdbuf() )
+{
+ gzfilestream_common::open( name, io_mode );
+}
+
+gzofstream::gzofstream( int fd, int io_mode ) :
+ ios( gzfilestream_common::rdbuf() )
+{
+ gzfilestream_common::attach( fd, io_mode );
+}
+
+gzofstream::~gzofstream() { }
--- /dev/null
+
+#ifndef zfstream_h
+#define zfstream_h
+
+#include <fstream.h>
+#include "zlib.h"
+
+class gzfilebuf : public streambuf {
+
+public:
+
+ gzfilebuf( );
+ virtual ~gzfilebuf();
+
+ gzfilebuf *open( const char *name, int io_mode );
+ gzfilebuf *attach( int file_descriptor, int io_mode );
+ gzfilebuf *close();
+
+ int setcompressionlevel( int comp_level );
+ int setcompressionstrategy( int comp_strategy );
+
+ inline int is_open() const { return (file !=NULL); }
+
+ virtual streampos seekoff( streamoff, ios::seek_dir, int );
+
+ virtual int sync();
+
+protected:
+
+ virtual int underflow();
+ virtual int overflow( int = EOF );
+
+private:
+
+ gzFile file;
+ short mode;
+ short own_file_descriptor;
+
+ int flushbuf();
+ int fillbuf();
+
+};
+
+class gzfilestream_common : virtual public ios {
+
+ friend class gzifstream;
+ friend class gzofstream;
+ friend gzofstream &setcompressionlevel( gzofstream &, int );
+ friend gzofstream &setcompressionstrategy( gzofstream &, int );
+
+public:
+ virtual ~gzfilestream_common();
+
+ void attach( int fd, int io_mode );
+ void open( const char *name, int io_mode );
+ void close();
+
+protected:
+ gzfilestream_common();
+
+private:
+ gzfilebuf *rdbuf();
+
+ gzfilebuf buffer;
+
+};
+
+class gzifstream : public gzfilestream_common, public istream {
+
+public:
+
+ gzifstream();
+ gzifstream( const char *name, int io_mode = ios::in );
+ gzifstream( int fd, int io_mode = ios::in );
+
+ virtual ~gzifstream();
+
+};
+
+class gzofstream : public gzfilestream_common, public ostream {
+
+public:
+
+ gzofstream();
+ gzofstream( const char *name, int io_mode = ios::out );
+ gzofstream( int fd, int io_mode = ios::out );
+
+ virtual ~gzofstream();
+
+};
+
+template<class T> class gzomanip {
+ friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
+public:
+ gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
+private:
+ gzofstream &(*func)(gzofstream &, T);
+ T val;
+};
+
+template<class T> gzofstream &operator<<(gzofstream &s, const gzomanip<T> &m)
+{
+ return (*m.func)(s, m.val);
+}
+
+inline gzofstream &setcompressionlevel( gzofstream &s, int l )
+{
+ (s.rdbuf())->setcompressionlevel(l);
+ return s;
+}
+
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l )
+{
+ (s.rdbuf())->setcompressionstrategy(l);
+ return s;
+}
+
+inline gzomanip<int> setcompressionlevel(int l)
+{
+ return gzomanip<int>(&setcompressionlevel,l);
+}
+
+inline gzomanip<int> setcompressionstrategy(int l)
+{
+ return gzomanip<int>(&setcompressionstrategy,l);
+}
+
+#endif
--- /dev/null
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation. Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose. It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+ zstringlen(class izstream&);
+ zstringlen(class ozstream&, const char*);
+ size_t value() const { return val.word; }
+private:
+ struct Val { unsigned char byte; size_t word; } val;
+};
+
+// ----------------------------- izstream -----------------------------
+
+class izstream
+{
+ public:
+ izstream() : m_fp(0) {}
+ izstream(FILE* fp) : m_fp(0) { open(fp); }
+ izstream(const char* name) : m_fp(0) { open(name); }
+ ~izstream() { close(); }
+
+ /* Opens a gzip (.gz) file for reading.
+ * open() can be used to read a file which is not in gzip format;
+ * in this case read() will directly read from the file without
+ * decompression. errno can be checked to distinguish two error
+ * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+ */
+ void open(const char* name) {
+ if (m_fp) close();
+ m_fp = ::gzopen(name, "rb");
+ }
+
+ void open(FILE* fp) {
+ SET_BINARY_MODE(fp);
+ if (m_fp) close();
+ m_fp = ::gzdopen(fileno(fp), "rb");
+ }
+
+ /* Flushes all pending input if necessary, closes the compressed file
+ * and deallocates all the (de)compression state. The return value is
+ * the zlib error number (see function error() below).
+ */
+ int close() {
+ int r = ::gzclose(m_fp);
+ m_fp = 0; return r;
+ }
+
+ /* Binary read the given number of bytes from the compressed file.
+ */
+ int read(void* buf, size_t len) {
+ return ::gzread(m_fp, buf, len);
+ }
+
+ /* Returns the error message for the last error which occurred on the
+ * given compressed file. errnum is set to zlib error number. If an
+ * error occurred in the file system and not in the compression library,
+ * errnum is set to Z_ERRNO and the application may consult errno
+ * to get the exact error code.
+ */
+ const char* error(int* errnum) {
+ return ::gzerror(m_fp, errnum);
+ }
+
+ gzFile fp() { return m_fp; }
+
+ private:
+ gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+ return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+ ::gzread(zs.fp(), &x, sizeof(T));
+ return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+ zs > val.byte;
+ if (val.byte == 255) zs > val.word;
+ else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+ zstringlen len(zs);
+ ::gzread(zs.fp(), x, len.value());
+ x[len.value()] = '\0';
+ return zs;
+}
+
+inline char* read_string(izstream& zs) {
+ zstringlen len(zs);
+ char* x = new char[len.value()+1];
+ ::gzread(zs.fp(), x, len.value());
+ x[len.value()] = '\0';
+ return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+ public:
+ ozstream() : m_fp(0), m_os(0) {
+ }
+ ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+ : m_fp(0), m_os(0) {
+ open(fp, level);
+ }
+ ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+ : m_fp(0), m_os(0) {
+ open(name, level);
+ }
+ ~ozstream() {
+ close();
+ }
+
+ /* Opens a gzip (.gz) file for writing.
+ * The compression level parameter should be in 0..9
+ * errno can be checked to distinguish two error cases
+ * (if errno is zero, the zlib error is Z_MEM_ERROR).
+ */
+ void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+ char mode[4] = "wb\0";
+ if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+ if (m_fp) close();
+ m_fp = ::gzopen(name, mode);
+ }
+
+ /* open from a FILE pointer.
+ */
+ void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+ SET_BINARY_MODE(fp);
+ char mode[4] = "wb\0";
+ if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+ if (m_fp) close();
+ m_fp = ::gzdopen(fileno(fp), mode);
+ }
+
+ /* Flushes all pending output if necessary, closes the compressed file
+ * and deallocates all the (de)compression state. The return value is
+ * the zlib error number (see function error() below).
+ */
+ int close() {
+ if (m_os) {
+ ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+ delete[] m_os->str(); delete m_os; m_os = 0;
+ }
+ int r = ::gzclose(m_fp); m_fp = 0; return r;
+ }
+
+ /* Binary write the given number of bytes into the compressed file.
+ */
+ int write(const void* buf, size_t len) {
+ return ::gzwrite(m_fp, (voidp) buf, len);
+ }
+
+ /* Flushes all pending output into the compressed file. The parameter
+ * _flush is as in the deflate() function. The return value is the zlib
+ * error number (see function gzerror below). flush() returns Z_OK if
+ * the flush_ parameter is Z_FINISH and all output could be flushed.
+ * flush() should be called only when strictly necessary because it can
+ * degrade compression.
+ */
+ int flush(int _flush) {
+ os_flush();
+ return ::gzflush(m_fp, _flush);
+ }
+
+ /* Returns the error message for the last error which occurred on the
+ * given compressed file. errnum is set to zlib error number. If an
+ * error occurred in the file system and not in the compression library,
+ * errnum is set to Z_ERRNO and the application may consult errno
+ * to get the exact error code.
+ */
+ const char* error(int* errnum) {
+ return ::gzerror(m_fp, errnum);
+ }
+
+ gzFile fp() { return m_fp; }
+
+ ostream& os() {
+ if (m_os == 0) m_os = new ostrstream;
+ return *m_os;
+ }
+
+ void os_flush() {
+ if (m_os && m_os->pcount()>0) {
+ ostrstream* oss = new ostrstream;
+ oss->fill(m_os->fill());
+ oss->flags(m_os->flags());
+ oss->precision(m_os->precision());
+ oss->width(m_os->width());
+ ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+ delete[] m_os->str(); delete m_os; m_os = oss;
+ }
+ }
+
+ private:
+ gzFile m_fp;
+ ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+ return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+ ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+ return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+ val.byte = 255; val.word = ::strlen(x);
+ if (val.word < 255) zs < (val.byte = val.word);
+ else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+ zstringlen len(zs, x);
+ ::gzwrite(zs.fp(), (voidp) x, len.value());
+ return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+ return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+ zs.os_flush();
+ return zs.os() << x;
+}
+
+#endif
--- /dev/null
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+ char h[256] = "Hello";
+ char* g = "Goodbye";
+ ozstream out("temp.gz");
+ out < "This works well" < h < g;
+ out.close();
+
+ izstream in("temp.gz"); // read it back
+ char *x = read_string(in), *y = new char[256], z[256];
+ in > y > z;
+ in.close();
+ cout << x << endl << y << endl << z << endl;
+
+ out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+ out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+ out << z << endl << y << endl << x << endl;
+ out << 1.1234567890123456789 << endl;
+
+ delete[] x; delete[] y;
+}
--- /dev/null
+These classes provide a C++ stream interface to the zlib library. It allows you
+to do things like:
+
+ gzofstream outf("blah.gz");
+ outf << "These go into the gzip file " << 123 << endl;
+
+It does this by deriving a specialized stream buffer for gzipped files, which is
+the way Stroustrup would have done it. :->
+
+The gzifstream and gzofstream classes were originally written by Kevin Ruland
+and made available in the zlib contrib/iostream directory. The older version still
+compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of
+this version.
+
+The new classes are as standard-compliant as possible, closely following the
+approach of the standard library's fstream classes. It compiles under gcc versions
+3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard
+library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs
+from the previous one in the following respects:
+- added showmanyc
+- added setbuf, with support for unbuffered output via setbuf(0,0)
+- a few bug fixes of stream behavior
+- gzipped output file opened with default compression level instead of maximum level
+- setcompressionlevel()/strategy() members replaced by single setcompression()
+
+The code is provided "as is", with the permission to use, copy, modify, distribute
+and sell it for any purpose without fee.
+
+Ludwig Schwardt
+<schwardt@sun.ac.za>
+
+DSP Lab
+Electrical & Electronic Engineering Department
+University of Stellenbosch
+South Africa
--- /dev/null
+Possible upgrades to gzfilebuf:
+
+- The ability to do putback (e.g. putbackfail)
+
+- The ability to seek (zlib supports this, but could be slow/tricky)
+
+- Simultaneous read/write access (does it make sense?)
+
+- Support for ios_base::ate open mode
+
+- Locale support?
+
+- Check public interface to see which calls give problems
+ (due to dependence on library internals)
+
+- Override operator<<(ostream&, gzfilebuf*) to allow direct copying
+ of stream buffer to stream ( i.e. os << is.rdbuf(); )
--- /dev/null
+/*
+ * Test program for gzifstream and gzofstream
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ */
+
+#include "zfstream.h"
+#include <iostream> // for cout
+
+int main() {
+
+ gzofstream outf;
+ gzifstream inf;
+ char buf[80];
+
+ outf.open("test1.txt.gz");
+ outf << "The quick brown fox sidestepped the lazy canine\n"
+ << 1.3 << "\nPlan " << 9 << std::endl;
+ outf.close();
+ std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n"
+ << "The quick brown fox sidestepped the lazy canine\n"
+ << 1.3 << "\nPlan " << 9 << std::endl;
+
+ std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n";
+ inf.open("test1.txt.gz");
+ while (inf.getline(buf,80,'\n')) {
+ std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+ }
+ inf.close();
+
+ outf.rdbuf()->pubsetbuf(0,0);
+ outf.open("test2.txt.gz");
+ outf << setcompression(Z_NO_COMPRESSION)
+ << "The quick brown fox sidestepped the lazy canine\n"
+ << 1.3 << "\nPlan " << 9 << std::endl;
+ outf.close();
+ std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form";
+
+ std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n";
+ inf.rdbuf()->pubsetbuf(0,0);
+ inf.open("test2.txt.gz");
+ while (inf.getline(buf,80,'\n')) {
+ std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+ }
+ inf.close();
+
+ return 0;
+
+}
--- /dev/null
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#include "zfstream.h"
+#include <cstring> // for strcpy, strcat, strlen (mode strings)
+#include <cstdio> // for BUFSIZ
+
+// Internal buffer sizes (default and "unbuffered" versions)
+#define BIGBUFSIZE BUFSIZ
+#define SMALLBUFSIZE 1
+
+/*****************************************************************************/
+
+// Default constructor
+gzfilebuf::gzfilebuf()
+: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false),
+ buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true)
+{
+ // No buffers to start with
+ this->disable_buffer();
+}
+
+// Destructor
+gzfilebuf::~gzfilebuf()
+{
+ // Sync output buffer and close only if responsible for file
+ // (i.e. attached streams should be left open at this stage)
+ this->sync();
+ if (own_fd)
+ this->close();
+ // Make sure internal buffer is deallocated
+ this->disable_buffer();
+}
+
+// Set compression level and strategy
+int
+gzfilebuf::setcompression(int comp_level,
+ int comp_strategy)
+{
+ return gzsetparams(file, comp_level, comp_strategy);
+}
+
+// Open gzipped file
+gzfilebuf*
+gzfilebuf::open(const char *name,
+ std::ios_base::openmode mode)
+{
+ // Fail if file already open
+ if (this->is_open())
+ return NULL;
+ // Don't support simultaneous read/write access (yet)
+ if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+ return NULL;
+
+ // Build mode string for gzopen and check it [27.8.1.3.2]
+ char char_mode[6] = "\0\0\0\0\0";
+ if (!this->open_mode(mode, char_mode))
+ return NULL;
+
+ // Attempt to open file
+ if ((file = gzopen(name, char_mode)) == NULL)
+ return NULL;
+
+ // On success, allocate internal buffer and set flags
+ this->enable_buffer();
+ io_mode = mode;
+ own_fd = true;
+ return this;
+}
+
+// Attach to gzipped file
+gzfilebuf*
+gzfilebuf::attach(int fd,
+ std::ios_base::openmode mode)
+{
+ // Fail if file already open
+ if (this->is_open())
+ return NULL;
+ // Don't support simultaneous read/write access (yet)
+ if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+ return NULL;
+
+ // Build mode string for gzdopen and check it [27.8.1.3.2]
+ char char_mode[6] = "\0\0\0\0\0";
+ if (!this->open_mode(mode, char_mode))
+ return NULL;
+
+ // Attempt to attach to file
+ if ((file = gzdopen(fd, char_mode)) == NULL)
+ return NULL;
+
+ // On success, allocate internal buffer and set flags
+ this->enable_buffer();
+ io_mode = mode;
+ own_fd = false;
+ return this;
+}
+
+// Close gzipped file
+gzfilebuf*
+gzfilebuf::close()
+{
+ // Fail immediately if no file is open
+ if (!this->is_open())
+ return NULL;
+ // Assume success
+ gzfilebuf* retval = this;
+ // Attempt to sync and close gzipped file
+ if (this->sync() == -1)
+ retval = NULL;
+ if (gzclose(file) < 0)
+ retval = NULL;
+ // File is now gone anyway (postcondition [27.8.1.3.8])
+ file = NULL;
+ own_fd = false;
+ // Destroy internal buffer if it exists
+ this->disable_buffer();
+ return retval;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Convert int open mode to mode string
+bool
+gzfilebuf::open_mode(std::ios_base::openmode mode,
+ char* c_mode) const
+{
+ bool testb = mode & std::ios_base::binary;
+ bool testi = mode & std::ios_base::in;
+ bool testo = mode & std::ios_base::out;
+ bool testt = mode & std::ios_base::trunc;
+ bool testa = mode & std::ios_base::app;
+
+ // Check for valid flag combinations - see [27.8.1.3.2] (Table 92)
+ // Original zfstream hardcoded the compression level to maximum here...
+ // Double the time for less than 1% size improvement seems
+ // excessive though - keeping it at the default level
+ // To change back, just append "9" to the next three mode strings
+ if (!testi && testo && !testt && !testa)
+ strcpy(c_mode, "w");
+ if (!testi && testo && !testt && testa)
+ strcpy(c_mode, "a");
+ if (!testi && testo && testt && !testa)
+ strcpy(c_mode, "w");
+ if (testi && !testo && !testt && !testa)
+ strcpy(c_mode, "r");
+ // No read/write mode yet
+// if (testi && testo && !testt && !testa)
+// strcpy(c_mode, "r+");
+// if (testi && testo && testt && !testa)
+// strcpy(c_mode, "w+");
+
+ // Mode string should be empty for invalid combination of flags
+ if (strlen(c_mode) == 0)
+ return false;
+ if (testb)
+ strcat(c_mode, "b");
+ return true;
+}
+
+// Determine number of characters in internal get buffer
+std::streamsize
+gzfilebuf::showmanyc()
+{
+ // Calls to underflow will fail if file not opened for reading
+ if (!this->is_open() || !(io_mode & std::ios_base::in))
+ return -1;
+ // Make sure get area is in use
+ if (this->gptr() && (this->gptr() < this->egptr()))
+ return std::streamsize(this->egptr() - this->gptr());
+ else
+ return 0;
+}
+
+// Fill get area from gzipped file
+gzfilebuf::int_type
+gzfilebuf::underflow()
+{
+ // If something is left in the get area by chance, return it
+ // (this shouldn't normally happen, as underflow is only supposed
+ // to be called when gptr >= egptr, but it serves as error check)
+ if (this->gptr() && (this->gptr() < this->egptr()))
+ return traits_type::to_int_type(*(this->gptr()));
+
+ // If the file hasn't been opened for reading, produce error
+ if (!this->is_open() || !(io_mode & std::ios_base::in))
+ return traits_type::eof();
+
+ // Attempt to fill internal buffer from gzipped file
+ // (buffer must be guaranteed to exist...)
+ int bytes_read = gzread(file, buffer, buffer_size);
+ // Indicates error or EOF
+ if (bytes_read <= 0)
+ {
+ // Reset get area
+ this->setg(buffer, buffer, buffer);
+ return traits_type::eof();
+ }
+ // Make all bytes read from file available as get area
+ this->setg(buffer, buffer, buffer + bytes_read);
+
+ // Return next character in get area
+ return traits_type::to_int_type(*(this->gptr()));
+}
+
+// Write put area to gzipped file
+gzfilebuf::int_type
+gzfilebuf::overflow(int_type c)
+{
+ // Determine whether put area is in use
+ if (this->pbase())
+ {
+ // Double-check pointer range
+ if (this->pptr() > this->epptr() || this->pptr() < this->pbase())
+ return traits_type::eof();
+ // Add extra character to buffer if not EOF
+ if (!traits_type::eq_int_type(c, traits_type::eof()))
+ {
+ *(this->pptr()) = traits_type::to_char_type(c);
+ this->pbump(1);
+ }
+ // Number of characters to write to file
+ int bytes_to_write = this->pptr() - this->pbase();
+ // Overflow doesn't fail if nothing is to be written
+ if (bytes_to_write > 0)
+ {
+ // If the file hasn't been opened for writing, produce error
+ if (!this->is_open() || !(io_mode & std::ios_base::out))
+ return traits_type::eof();
+ // If gzipped file won't accept all bytes written to it, fail
+ if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write)
+ return traits_type::eof();
+ // Reset next pointer to point to pbase on success
+ this->pbump(-bytes_to_write);
+ }
+ }
+ // Write extra character to file if not EOF
+ else if (!traits_type::eq_int_type(c, traits_type::eof()))
+ {
+ // If the file hasn't been opened for writing, produce error
+ if (!this->is_open() || !(io_mode & std::ios_base::out))
+ return traits_type::eof();
+ // Impromptu char buffer (allows "unbuffered" output)
+ char_type last_char = traits_type::to_char_type(c);
+ // If gzipped file won't accept this character, fail
+ if (gzwrite(file, &last_char, 1) != 1)
+ return traits_type::eof();
+ }
+
+ // If you got here, you have succeeded (even if c was EOF)
+ // The return value should therefore be non-EOF
+ if (traits_type::eq_int_type(c, traits_type::eof()))
+ return traits_type::not_eof(c);
+ else
+ return c;
+}
+
+// Assign new buffer
+std::streambuf*
+gzfilebuf::setbuf(char_type* p,
+ std::streamsize n)
+{
+ // First make sure stuff is sync'ed, for safety
+ if (this->sync() == -1)
+ return NULL;
+ // If buffering is turned off on purpose via setbuf(0,0), still allocate one...
+ // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at
+ // least a buffer of size 1 (very inefficient though, therefore make it bigger?)
+ // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems)
+ if (!p || !n)
+ {
+ // Replace existing buffer (if any) with small internal buffer
+ this->disable_buffer();
+ buffer = NULL;
+ buffer_size = 0;
+ own_buffer = true;
+ this->enable_buffer();
+ }
+ else
+ {
+ // Replace existing buffer (if any) with external buffer
+ this->disable_buffer();
+ buffer = p;
+ buffer_size = n;
+ own_buffer = false;
+ this->enable_buffer();
+ }
+ return this;
+}
+
+// Write put area to gzipped file (i.e. ensures that put area is empty)
+int
+gzfilebuf::sync()
+{
+ return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Allocate internal buffer
+void
+gzfilebuf::enable_buffer()
+{
+ // If internal buffer required, allocate one
+ if (own_buffer && !buffer)
+ {
+ // Check for buffered vs. "unbuffered"
+ if (buffer_size > 0)
+ {
+ // Allocate internal buffer
+ buffer = new char_type[buffer_size];
+ // Get area starts empty and will be expanded by underflow as need arises
+ this->setg(buffer, buffer, buffer);
+ // Setup entire internal buffer as put area.
+ // The one-past-end pointer actually points to the last element of the buffer,
+ // so that overflow(c) can safely add the extra character c to the sequence.
+ // These pointers remain in place for the duration of the buffer
+ this->setp(buffer, buffer + buffer_size - 1);
+ }
+ else
+ {
+ // Even in "unbuffered" case, (small?) get buffer is still required
+ buffer_size = SMALLBUFSIZE;
+ buffer = new char_type[buffer_size];
+ this->setg(buffer, buffer, buffer);
+ // "Unbuffered" means no put buffer
+ this->setp(0, 0);
+ }
+ }
+ else
+ {
+ // If buffer already allocated, reset buffer pointers just to make sure no
+ // stale chars are lying around
+ this->setg(buffer, buffer, buffer);
+ this->setp(buffer, buffer + buffer_size - 1);
+ }
+}
+
+// Destroy internal buffer
+void
+gzfilebuf::disable_buffer()
+{
+ // If internal buffer exists, deallocate it
+ if (own_buffer && buffer)
+ {
+ // Preserve unbuffered status by zeroing size
+ if (!this->pbase())
+ buffer_size = 0;
+ delete[] buffer;
+ buffer = NULL;
+ this->setg(0, 0, 0);
+ this->setp(0, 0);
+ }
+ else
+ {
+ // Reset buffer pointers to initial state if external buffer exists
+ this->setg(buffer, buffer, buffer);
+ if (buffer)
+ this->setp(buffer, buffer + buffer_size - 1);
+ else
+ this->setp(0, 0);
+ }
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzifstream::gzifstream()
+: std::istream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzifstream::gzifstream(const char* name,
+ std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+ this->init(&sb);
+ this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzifstream::gzifstream(int fd,
+ std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+ this->init(&sb);
+ this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzifstream::open(const char* name,
+ std::ios_base::openmode mode)
+{
+ if (!sb.open(name, mode | std::ios_base::in))
+ this->setstate(std::ios_base::failbit);
+ else
+ this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzifstream::attach(int fd,
+ std::ios_base::openmode mode)
+{
+ if (!sb.attach(fd, mode | std::ios_base::in))
+ this->setstate(std::ios_base::failbit);
+ else
+ this->clear();
+}
+
+// Close file
+void
+gzifstream::close()
+{
+ if (!sb.close())
+ this->setstate(std::ios_base::failbit);
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzofstream::gzofstream()
+: std::ostream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzofstream::gzofstream(const char* name,
+ std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+ this->init(&sb);
+ this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzofstream::gzofstream(int fd,
+ std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+ this->init(&sb);
+ this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzofstream::open(const char* name,
+ std::ios_base::openmode mode)
+{
+ if (!sb.open(name, mode | std::ios_base::out))
+ this->setstate(std::ios_base::failbit);
+ else
+ this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzofstream::attach(int fd,
+ std::ios_base::openmode mode)
+{
+ if (!sb.attach(fd, mode | std::ios_base::out))
+ this->setstate(std::ios_base::failbit);
+ else
+ this->clear();
+}
+
+// Close file
+void
+gzofstream::close()
+{
+ if (!sb.close())
+ this->setstate(std::ios_base::failbit);
+}
--- /dev/null
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#ifndef ZFSTREAM_H
+#define ZFSTREAM_H
+
+#include <istream> // not iostream, since we don't need cin/cout
+#include <ostream>
+#include "zlib.h"
+
+/*****************************************************************************/
+
+/**
+ * @brief Gzipped file stream buffer class.
+ *
+ * This class implements basic_filebuf for gzipped files. It doesn't yet support
+ * seeking (allowed by zlib but slow/limited), putback and read/write access
+ * (tricky). Otherwise, it attempts to be a drop-in replacement for the standard
+ * file streambuf.
+*/
+class gzfilebuf : public std::streambuf
+{
+public:
+ // Default constructor.
+ gzfilebuf();
+
+ // Destructor.
+ virtual
+ ~gzfilebuf();
+
+ /**
+ * @brief Set compression level and strategy on the fly.
+ * @param comp_level Compression level (see zlib.h for allowed values)
+ * @param comp_strategy Compression strategy (see zlib.h for allowed values)
+ * @return Z_OK on success, Z_STREAM_ERROR otherwise.
+ *
+ * Unfortunately, these parameters cannot be modified separately, as the
+ * previous zfstream version assumed. Since the strategy is seldom changed,
+ * it can default and setcompression(level) then becomes like the old
+ * setcompressionlevel(level).
+ */
+ int
+ setcompression(int comp_level,
+ int comp_strategy = Z_DEFAULT_STRATEGY);
+
+ /**
+ * @brief Check if file is open.
+ * @return True if file is open.
+ */
+ bool
+ is_open() const { return (file != NULL); }
+
+ /**
+ * @brief Open gzipped file.
+ * @param name File name.
+ * @param mode Open mode flags.
+ * @return @c this on success, NULL on failure.
+ */
+ gzfilebuf*
+ open(const char* name,
+ std::ios_base::openmode mode);
+
+ /**
+ * @brief Attach to already open gzipped file.
+ * @param fd File descriptor.
+ * @param mode Open mode flags.
+ * @return @c this on success, NULL on failure.
+ */
+ gzfilebuf*
+ attach(int fd,
+ std::ios_base::openmode mode);
+
+ /**
+ * @brief Close gzipped file.
+ * @return @c this on success, NULL on failure.
+ */
+ gzfilebuf*
+ close();
+
+protected:
+ /**
+ * @brief Convert ios open mode int to mode string used by zlib.
+ * @return True if valid mode flag combination.
+ */
+ bool
+ open_mode(std::ios_base::openmode mode,
+ char* c_mode) const;
+
+ /**
+ * @brief Number of characters available in stream buffer.
+ * @return Number of characters.
+ *
+ * This indicates number of characters in get area of stream buffer.
+ * These characters can be read without accessing the gzipped file.
+ */
+ virtual std::streamsize
+ showmanyc();
+
+ /**
+ * @brief Fill get area from gzipped file.
+ * @return First character in get area on success, EOF on error.
+ *
+ * This actually reads characters from gzipped file to stream
+ * buffer. Always buffered.
+ */
+ virtual int_type
+ underflow();
+
+ /**
+ * @brief Write put area to gzipped file.
+ * @param c Extra character to add to buffer contents.
+ * @return Non-EOF on success, EOF on error.
+ *
+ * This actually writes characters in stream buffer to
+ * gzipped file. With unbuffered output this is done one
+ * character at a time.
+ */
+ virtual int_type
+ overflow(int_type c = traits_type::eof());
+
+ /**
+ * @brief Installs external stream buffer.
+ * @param p Pointer to char buffer.
+ * @param n Size of external buffer.
+ * @return @c this on success, NULL on failure.
+ *
+ * Call setbuf(0,0) to enable unbuffered output.
+ */
+ virtual std::streambuf*
+ setbuf(char_type* p,
+ std::streamsize n);
+
+ /**
+ * @brief Flush stream buffer to file.
+ * @return 0 on success, -1 on error.
+ *
+ * This calls underflow(EOF) to do the job.
+ */
+ virtual int
+ sync();
+
+//
+// Some future enhancements
+//
+// virtual int_type uflow();
+// virtual int_type pbackfail(int_type c = traits_type::eof());
+// virtual pos_type
+// seekoff(off_type off,
+// std::ios_base::seekdir way,
+// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+// virtual pos_type
+// seekpos(pos_type sp,
+// std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+
+private:
+ /**
+ * @brief Allocate internal buffer.
+ *
+ * This function is safe to call multiple times. It will ensure
+ * that a proper internal buffer exists if it is required. If the
+ * buffer already exists or is external, the buffer pointers will be
+ * reset to their original state.
+ */
+ void
+ enable_buffer();
+
+ /**
+ * @brief Destroy internal buffer.
+ *
+ * This function is safe to call multiple times. It will ensure
+ * that the internal buffer is deallocated if it exists. In any
+ * case, it will also reset the buffer pointers.
+ */
+ void
+ disable_buffer();
+
+ /**
+ * Underlying file pointer.
+ */
+ gzFile file;
+
+ /**
+ * Mode in which file was opened.
+ */
+ std::ios_base::openmode io_mode;
+
+ /**
+ * @brief True if this object owns file descriptor.
+ *
+ * This makes the class responsible for closing the file
+ * upon destruction.
+ */
+ bool own_fd;
+
+ /**
+ * @brief Stream buffer.
+ *
+ * For simplicity this remains allocated on the free store for the
+ * entire life span of the gzfilebuf object, unless replaced by setbuf.
+ */
+ char_type* buffer;
+
+ /**
+ * @brief Stream buffer size.
+ *
+ * Defaults to system default buffer size (typically 8192 bytes).
+ * Modified by setbuf.
+ */
+ std::streamsize buffer_size;
+
+ /**
+ * @brief True if this object owns stream buffer.
+ *
+ * This makes the class responsible for deleting the buffer
+ * upon destruction.
+ */
+ bool own_buffer;
+};
+
+/*****************************************************************************/
+
+/**
+ * @brief Gzipped file input stream class.
+ *
+ * This class implements ifstream for gzipped files. Seeking and putback
+ * is not supported yet.
+*/
+class gzifstream : public std::istream
+{
+public:
+ // Default constructor
+ gzifstream();
+
+ /**
+ * @brief Construct stream on gzipped file to be opened.
+ * @param name File name.
+ * @param mode Open mode flags (forced to contain ios::in).
+ */
+ explicit
+ gzifstream(const char* name,
+ std::ios_base::openmode mode = std::ios_base::in);
+
+ /**
+ * @brief Construct stream on already open gzipped file.
+ * @param fd File descriptor.
+ * @param mode Open mode flags (forced to contain ios::in).
+ */
+ explicit
+ gzifstream(int fd,
+ std::ios_base::openmode mode = std::ios_base::in);
+
+ /**
+ * Obtain underlying stream buffer.
+ */
+ gzfilebuf*
+ rdbuf() const
+ { return const_cast<gzfilebuf*>(&sb); }
+
+ /**
+ * @brief Check if file is open.
+ * @return True if file is open.
+ */
+ bool
+ is_open() { return sb.is_open(); }
+
+ /**
+ * @brief Open gzipped file.
+ * @param name File name.
+ * @param mode Open mode flags (forced to contain ios::in).
+ *
+ * Stream will be in state good() if file opens successfully;
+ * otherwise in state fail(). This differs from the behavior of
+ * ifstream, which never sets the state to good() and therefore
+ * won't allow you to reuse the stream for a second file unless
+ * you manually clear() the state. The choice is a matter of
+ * convenience.
+ */
+ void
+ open(const char* name,
+ std::ios_base::openmode mode = std::ios_base::in);
+
+ /**
+ * @brief Attach to already open gzipped file.
+ * @param fd File descriptor.
+ * @param mode Open mode flags (forced to contain ios::in).
+ *
+ * Stream will be in state good() if attach succeeded; otherwise
+ * in state fail().
+ */
+ void
+ attach(int fd,
+ std::ios_base::openmode mode = std::ios_base::in);
+
+ /**
+ * @brief Close gzipped file.
+ *
+ * Stream will be in state fail() if close failed.
+ */
+ void
+ close();
+
+private:
+ /**
+ * Underlying stream buffer.
+ */
+ gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ * @brief Gzipped file output stream class.
+ *
+ * This class implements ofstream for gzipped files. Seeking and putback
+ * is not supported yet.
+*/
+class gzofstream : public std::ostream
+{
+public:
+ // Default constructor
+ gzofstream();
+
+ /**
+ * @brief Construct stream on gzipped file to be opened.
+ * @param name File name.
+ * @param mode Open mode flags (forced to contain ios::out).
+ */
+ explicit
+ gzofstream(const char* name,
+ std::ios_base::openmode mode = std::ios_base::out);
+
+ /**
+ * @brief Construct stream on already open gzipped file.
+ * @param fd File descriptor.
+ * @param mode Open mode flags (forced to contain ios::out).
+ */
+ explicit
+ gzofstream(int fd,
+ std::ios_base::openmode mode = std::ios_base::out);
+
+ /**
+ * Obtain underlying stream buffer.
+ */
+ gzfilebuf*
+ rdbuf() const
+ { return const_cast<gzfilebuf*>(&sb); }
+
+ /**
+ * @brief Check if file is open.
+ * @return True if file is open.
+ */
+ bool
+ is_open() { return sb.is_open(); }
+
+ /**
+ * @brief Open gzipped file.
+ * @param name File name.
+ * @param mode Open mode flags (forced to contain ios::out).
+ *
+ * Stream will be in state good() if file opens successfully;
+ * otherwise in state fail(). This differs from the behavior of
+ * ofstream, which never sets the state to good() and therefore
+ * won't allow you to reuse the stream for a second file unless
+ * you manually clear() the state. The choice is a matter of
+ * convenience.
+ */
+ void
+ open(const char* name,
+ std::ios_base::openmode mode = std::ios_base::out);
+
+ /**
+ * @brief Attach to already open gzipped file.
+ * @param fd File descriptor.
+ * @param mode Open mode flags (forced to contain ios::out).
+ *
+ * Stream will be in state good() if attach succeeded; otherwise
+ * in state fail().
+ */
+ void
+ attach(int fd,
+ std::ios_base::openmode mode = std::ios_base::out);
+
+ /**
+ * @brief Close gzipped file.
+ *
+ * Stream will be in state fail() if close failed.
+ */
+ void
+ close();
+
+private:
+ /**
+ * Underlying stream buffer.
+ */
+ gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ * @brief Gzipped file output stream manipulator class.
+ *
+ * This class defines a two-argument manipulator for gzofstream. It is used
+ * as base for the setcompression(int,int) manipulator.
+*/
+template<typename T1, typename T2>
+ class gzomanip2
+ {
+ public:
+ // Allows insertor to peek at internals
+ template <typename Ta, typename Tb>
+ friend gzofstream&
+ operator<<(gzofstream&,
+ const gzomanip2<Ta,Tb>&);
+
+ // Constructor
+ gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2),
+ T1 v1,
+ T2 v2);
+ private:
+ // Underlying manipulator function
+ gzofstream&
+ (*func)(gzofstream&, T1, T2);
+
+ // Arguments for manipulator function
+ T1 val1;
+ T2 val2;
+ };
+
+/*****************************************************************************/
+
+// Manipulator function thunks through to stream buffer
+inline gzofstream&
+setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY)
+{
+ (gzs.rdbuf())->setcompression(l, s);
+ return gzs;
+}
+
+// Manipulator constructor stores arguments
+template<typename T1, typename T2>
+ inline
+ gzomanip2<T1,T2>::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2),
+ T1 v1,
+ T2 v2)
+ : func(f), val1(v1), val2(v2)
+ { }
+
+// Insertor applies underlying manipulator function to stream
+template<typename T1, typename T2>
+ inline gzofstream&
+ operator<<(gzofstream& s, const gzomanip2<T1,T2>& m)
+ { return (*m.func)(s, m.val1, m.val2); }
+
+// Insert this onto stream to simplify setting of compression level
+inline gzomanip2<int,int>
+setcompression(int l, int s = Z_DEFAULT_STRATEGY)
+{ return gzomanip2<int,int>(&setcompression, l, s); }
+
+#endif // ZFSTREAM_H
--- /dev/null
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
--- /dev/null
+;uInt longest_match_x64(
+; deflate_state *s,
+; IPos cur_match); /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
+; (AMD64 on Athlon 64, Opteron, Phenom
+; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+; from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+; and by taking inspiration on asm686 with masm, optimised assembly code
+; from Brian Raiter, written 1998
+;
+; This software is provided 'as-is', without any express or implied
+; warranty. In no event will the authors be held liable for any damages
+; arising from the use of this software.
+;
+; Permission is granted to anyone to use this software for any purpose,
+; including commercial applications, and to alter it and redistribute it
+; freely, subject to the following restrictions:
+;
+; 1. The origin of this software must not be misrepresented; you must not
+; claim that you wrote the original software. If you use this software
+; in a product, an acknowledgment in the product documentation would be
+; appreciated but is not required.
+; 2. Altered source versions must be plainly marked as such, and must not be
+; misrepresented as being the original software
+; 3. This notice may not be removed or altered from any source distribution.
+;
+;
+;
+; http://www.zlib.net
+; http://www.winimage.com/zLibDll
+; http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+; ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+; (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+; value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+; (you can get Windows WDK with ml64 for AMD64 from
+; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+; deflate_state *s;
+; IPos cur_match; /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize equ 88
+ LocalVarsSize equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register : r14,r15
+; register can be saved : rsp
+
+ chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len
+ ; low word: s->wmask
+;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10
+;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11
+;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w
+;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx
+;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13
+;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d
+;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch equ (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi equ rsp + 24 - LocalVarsSize
+save_rsi equ rsp + 32 - LocalVarsSize
+save_rbx equ rsp + 40 - LocalVarsSize
+save_rbp equ rsp + 48 - LocalVarsSize
+save_r12 equ rsp + 56 - LocalVarsSize
+save_r13 equ rsp + 64 - LocalVarsSize
+;save_r14 equ rsp + 72 - LocalVarsSize
+;save_r15 equ rsp + 80 - LocalVarsSize
+
+
+; summary of register usage
+; scanend ebx
+; scanendw bx
+; chainlenwmask edx
+; curmatch rsi
+; curmatchd esi
+; windowbestlen r8
+; scanalign r9
+; scanalignd r9d
+; window r10
+; bestlen r11
+; bestlend r11d
+; scanstart r12d
+; scanstartw r12w
+; scan r13
+; nicematch r14d
+; limit r15
+; limitd r15d
+; prev rcx
+
+; all the +4 offsets are due to the addition of pending_buf_size (in zlib
+; in the deflate_state structure since the asm code was first written
+; (if you compile with zlib 1.0.4 or older, remove the +4).
+; Note : these value are good with a 8 bytes boundary pack structure
+
+
+ MAX_MATCH equ 258
+ MIN_MATCH equ 3
+ MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+; all the +zlib1222add offsets are due to the addition of fields
+; in zlib in the deflate_state structure since the asm code was first written
+; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA SEGMENT
+COMM window_size:DWORD
+; WMask ; 7fff
+COMM window:BYTE:010040H
+COMM prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM strstart:DWORD
+COMM match_start:DWORD
+; Lookahead : ignore
+COMM prev_length:DWORD ; PrevLen
+COMM max_chain_length:DWORD
+COMM good_match:DWORD
+COMM nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+ IFNDEF zlib1222add
+ zlib1222add equ 8
+ ENDIF
+dsWSize equ 56+zlib1222add+(zlib1222add/2)
+dsWMask equ 64+zlib1222add+(zlib1222add/2)
+dsWindow equ 72+zlib1222add
+dsPrev equ 88+zlib1222add
+dsMatchLen equ 128+zlib1222add
+dsPrevMatch equ 132+zlib1222add
+dsStrStart equ 140+zlib1222add
+dsMatchStart equ 144+zlib1222add
+dsLookahead equ 148+zlib1222add
+dsPrevLen equ 152+zlib1222add
+dsMaxChainLen equ 156+zlib1222add
+dsGoodMatch equ 172+zlib1222add
+dsNiceMatch equ 176+zlib1222add
+
+window_size equ [ rcx + dsWSize]
+WMask equ [ rcx + dsWMask]
+window_ad equ [ rcx + dsWindow]
+prev_ad equ [ rcx + dsPrev]
+strstart equ [ rcx + dsStrStart]
+match_start equ [ rcx + dsMatchStart]
+Lookahead equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match equ [ rcx + dsGoodMatch]
+nice_match equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+ mov [save_rdi],rdi
+ mov [save_rsi],rsi
+ mov [save_rbx],rbx
+ mov [save_rbp],rbp
+IFDEF INFOZIP
+ mov r8d,ecx
+ELSE
+ mov r8d,edx
+ENDIF
+ mov [save_r12],r12
+ mov [save_r13],r13
+; mov [save_r14],r14
+; mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;; chain_length >>= 2;
+;;; }
+
+ mov edi, prev_length
+ mov esi, good_match
+ mov eax, WMask
+ mov ebx, max_chain_length
+ cmp edi, esi
+ jl LastMatchGood
+ shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+ dec ebx
+ shl ebx, 16
+ or ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+ mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+ mov eax, nice_match
+ mov [chainlenwmask], ebx
+ mov r10d, Lookahead
+ cmp r10d, eax
+ cmovnl r10d, eax
+ mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+ mov r10, window_ad
+ mov ebp, strstart
+ lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+ mov r9,r13
+ neg r13
+ and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+ mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+ mov eax, window_size
+ sub eax, MIN_LOOKAHEAD
+ENDIF
+ xor edi,edi
+ sub ebp, eax
+
+ mov r11d, prev_length
+
+ cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+ lea rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+ movzx r12d,word ptr [r9]
+ movzx ebx, word ptr [r9 + r11 - 1]
+
+ mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+ mov edx, [chainlenwmask]
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ jz LookupLoopIsZero
+
+LookupLoop1:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ jbe LeaveNow
+ sub edx, 00010000h
+ js LeaveNow
+
+LoopEntry1:
+ cmp bx,word ptr [rsi + r8 - 1]
+ jz LookupLoopIsZero
+
+LookupLoop2:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ jbe LeaveNow
+ sub edx, 00010000h
+ js LeaveNow
+
+LoopEntry2:
+ cmp bx,word ptr [rsi + r8 - 1]
+ jz LookupLoopIsZero
+
+LookupLoop4:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ jbe LeaveNow
+ sub edx, 00010000h
+ js LeaveNow
+
+LoopEntry4:
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ jnz LookupLoop1
+ jmp LookupLoopIsZero
+
+
+;;; do {
+;;; match = s->window + cur_match;
+;;; if (*(ushf*)(match+best_len-1) != scan_end ||
+;;; *(ushf*)match != scan_start) continue;
+;;; [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;; && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+ and r8d, edx
+
+ movzx r8d, word ptr [rdi + r8*2]
+ cmp r8d, ebp
+ jbe LeaveNow
+ sub edx, 00010000h
+ js LeaveNow
+
+LoopEntry:
+
+ cmp bx,word ptr [rsi + r8 - 1]
+ jnz LookupLoop1
+LookupLoopIsZero:
+ cmp r12w, word ptr [r10 + r8]
+ jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+ mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+ lea rsi,[r8+r10]
+ mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+ lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+ lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+ prefetcht1 [rsi+rdx]
+ prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+ mov rax, [rsi + rdx]
+ xor rax, [rdi + rdx]
+ jnz LeaveLoopCmps
+
+ mov rax, [rsi + rdx + 8]
+ xor rax, [rdi + rdx + 8]
+ jnz LeaveLoopCmps8
+
+
+ mov rax, [rsi + rdx + 8+8]
+ xor rax, [rdi + rdx + 8+8]
+ jnz LeaveLoopCmps16
+
+ add rdx,8+8+8
+
+ jnz short LoopCmps
+ jmp short LenMaximum
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+ test eax, 0000FFFFh
+ jnz LenLower
+
+ test eax,0ffffffffh
+
+ jnz LenLower32
+
+ add rdx,4
+ shr rax,32
+ or ax,ax
+ jnz LenLower
+
+LenLower32:
+ shr eax,16
+ add rdx,2
+LenLower: sub al, 1
+ adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+ lea rax, [rdi + rdx]
+ sub rax, r9
+ cmp eax, MAX_MATCH
+ jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+ cmp eax, r11d
+ jg LongerMatch
+
+ lea rsi,[r10+r11]
+
+ mov rdi, prev_ad
+ mov edx, [chainlenwmask]
+ jmp LookupLoop
+
+;;; s->match_start = cur_match;
+;;; best_len = len;
+;;; if (len >= nice_match) break;
+;;; scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+ mov r11d, eax
+ mov match_start, r8d
+ cmp eax, [nicematch]
+ jge LeaveNow
+
+ lea rsi,[r10+rax]
+
+ movzx ebx, word ptr [r9 + rax - 1]
+ mov rdi, prev_ad
+ mov edx, [chainlenwmask]
+ jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+ mov r11d,MAX_MATCH
+ mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+ mov eax,r11d
+ELSE
+ mov eax, Lookahead
+ cmp r11d, eax
+ cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+ mov rsi,[save_rsi]
+ mov rdi,[save_rdi]
+ mov rbx,[save_rbx]
+ mov rbp,[save_rbp]
+ mov r12,[save_r12]
+ mov r13,[save_r13]
+; mov r14,[save_r14]
+; mov r15,[save_r15]
+
+
+ ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+ db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match ENDP
+
+match_init PROC
+ ret 0
+match_init ENDP
+
+
+END
--- /dev/null
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at
+ * the moment. I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled. I will attempt to merge the MMX code into this version. Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+
+
+
+ typedef struct inffast_ar {
+/* 64 32 x86 x86_64 */
+/* ar offset register */
+/* 0 0 */ void *esp; /* esp save */
+/* 8 4 */ void *ebp; /* ebp save */
+/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */
+/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */
+/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */
+/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */
+/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */
+/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */
+/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */
+/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */
+/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */
+/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */
+/* 92 48 */ unsigned wsize; /* window size */
+/* 96 52 */ unsigned write; /* window write index */
+/*100 56 */ unsigned lmask; /* r12 mask for lcode */
+/*104 60 */ unsigned dmask; /* r13 mask for dcode */
+/*108 64 */ unsigned len; /* r14 match length */
+/*112 68 */ unsigned dist; /* r15 match distance */
+/*116 72 */ unsigned status; /* set when state chng*/
+ } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ type_ar ar;
+ void inffas8664fnc(struct inffast_ar * par);
+
+
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+
+ ar.in = strm->next_in;
+ ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+ ar.out = strm->next_out;
+ ar.beg = ar.out - (start - strm->avail_out);
+ ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+ ar.wsize = state->wsize;
+ ar.write = state->wnext;
+ ar.window = state->window;
+ ar.hold = state->hold;
+ ar.bits = state->bits;
+ ar.lcode = state->lencode;
+ ar.dcode = state->distcode;
+ ar.lmask = (1U << state->lenbits) - 1;
+ ar.dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+
+ /* align in on 1/2 hold size boundary */
+ while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+ ar.hold += (unsigned long)*ar.in++ << ar.bits;
+ ar.bits += 8;
+ }
+
+ inffas8664fnc(&ar);
+
+ if (ar.status > 1) {
+ if (ar.status == 2)
+ strm->msg = "invalid literal/length code";
+ else if (ar.status == 3)
+ strm->msg = "invalid distance code";
+ else
+ strm->msg = "invalid distance too far back";
+ state->mode = BAD;
+ }
+ else if ( ar.status == 1 ) {
+ state->mode = TYPE;
+ }
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ ar.len = ar.bits >> 3;
+ ar.in -= ar.len;
+ ar.bits -= ar.len << 3;
+ ar.hold &= (1U << ar.bits) - 1;
+
+ /* update state and return */
+ strm->next_in = ar.in;
+ strm->next_out = ar.out;
+ strm->avail_in = (unsigned)(ar.in < ar.last ?
+ PAD_AVAIL_IN + (ar.last - ar.in) :
+ PAD_AVAIL_IN - (ar.in - ar.last));
+ strm->avail_out = (unsigned)(ar.out < ar.end ?
+ PAD_AVAIL_OUT + (ar.end - ar.out) :
+ PAD_AVAIL_OUT - (ar.out - ar.end));
+ state->hold = (unsigned long)ar.hold;
+ state->bits = ar.bits;
+ return;
+}
+
+#endif
--- /dev/null
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+; ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+; with Microsoft Macro Assembler (x64) for AMD64
+;
+
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+; (you can get Windows WDK with ml64 for AMD64 from
+; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+ mov [rsp-8],rsi
+ mov [rsp-16],rdi
+ mov [rsp-24],r12
+ mov [rsp-32],r13
+ mov [rsp-40],r14
+ mov [rsp-48],r15
+ mov [rsp-56],rbx
+
+ mov rax,rcx
+
+ mov [rax+8], rbp ; /* save regs rbp and rsp */
+ mov [rax], rsp
+
+ mov rsp, rax ; /* make rsp point to &ar */
+
+ mov rsi, [rsp+16] ; /* rsi = in */
+ mov rdi, [rsp+32] ; /* rdi = out */
+ mov r9, [rsp+24] ; /* r9 = last */
+ mov r10, [rsp+48] ; /* r10 = end */
+ mov rbp, [rsp+64] ; /* rbp = lcode */
+ mov r11, [rsp+72] ; /* r11 = dcode */
+ mov rdx, [rsp+80] ; /* rdx = hold */
+ mov ebx, [rsp+88] ; /* ebx = bits */
+ mov r12d, [rsp+100] ; /* r12d = lmask */
+ mov r13d, [rsp+104] ; /* r13d = dmask */
+ ; /* r14d = len */
+ ; /* r15d = dist */
+
+
+ cld
+ cmp r10, rdi
+ je L_one_time ; /* if only one decode left */
+ cmp r9, rsi
+
+ jne L_do_loop
+
+
+L_one_time:
+ mov r8, r12 ; /* r8 = lmask */
+ cmp bl, 32
+ ja L_get_length_code_one_time
+
+ lodsd ; /* eax = *(uint *)in++ */
+ mov cl, bl ; /* cl = bits, needs it for shifting */
+ add bl, 32 ; /* bits += 32 */
+ shl rax, cl
+ or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
+ jmp L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+ cmp r10, rdi
+ jbe L_break_loop
+ cmp r9, rsi
+ jbe L_break_loop
+
+L_do_loop:
+ mov r8, r12 ; /* r8 = lmask */
+ cmp bl, 32
+ ja L_get_length_code ; /* if (32 < bits) */
+
+ lodsd ; /* eax = *(uint *)in++ */
+ mov cl, bl ; /* cl = bits, needs it for shifting */
+ add bl, 32 ; /* bits += 32 */
+ shl rax, cl
+ or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+ and r8, rdx ; /* r8 &= hold */
+ mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+ mov cl, ah ; /* cl = this.bits */
+ sub bl, ah ; /* bits -= this.bits */
+ shr rdx, cl ; /* hold >>= this.bits */
+
+ test al, al
+ jnz L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+ mov r8, r12 ; /* r8 = lmask */
+ shr eax, 16 ; /* output this.val char */
+ stosb
+
+L_get_length_code_one_time:
+ and r8, rdx ; /* r8 &= hold */
+ mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+ mov cl, ah ; /* cl = this.bits */
+ sub bl, ah ; /* bits -= this.bits */
+ shr rdx, cl ; /* hold >>= this.bits */
+
+ test al, al
+ jnz L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+ shr eax, 16 ; /* output this.val char */
+ stosb
+ jmp L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+ mov r14d, eax ; /* len = this */
+ shr r14d, 16 ; /* len = this.val */
+ mov cl, al
+
+ test al, 16
+ jz L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+ and cl, 15 ; /* op &= 15 */
+ jz L_decode_distance ; /* if (!op) */
+
+L_add_bits_to_len:
+ sub bl, cl
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx ; /* eax &= hold */
+ shr rdx, cl
+ add r14d, eax ; /* len += hold & mask[op] */
+
+L_decode_distance:
+ mov r8, r13 ; /* r8 = dmask */
+ cmp bl, 32
+ ja L_get_distance_code ; /* if (32 < bits) */
+
+ lodsd ; /* eax = *(uint *)in++ */
+ mov cl, bl ; /* cl = bits, needs it for shifting */
+ add bl, 32 ; /* bits += 32 */
+ shl rax, cl
+ or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+ and r8, rdx ; /* r8 &= hold */
+ mov eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+ mov r15d, eax ; /* dist = this */
+ shr r15d, 16 ; /* dist = this.val */
+ mov cl, ah
+ sub bl, ah ; /* bits -= this.bits */
+ shr rdx, cl ; /* hold >>= this.bits */
+ mov cl, al ; /* cl = this.op */
+
+ test al, 16 ; /* if ((op & 16) == 0) */
+ jz L_test_for_second_level_dist
+ and cl, 15 ; /* op &= 15 */
+ jz L_check_dist_one
+
+L_add_bits_to_dist:
+ sub bl, cl
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax ; /* (1 << op) - 1 */
+ and eax, edx ; /* eax &= hold */
+ shr rdx, cl
+ add r15d, eax ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+ mov r8, rsi ; /* save in so from can use it's reg */
+ mov rax, rdi
+ sub rax, [rsp+40] ; /* nbytes = out - beg */
+
+ cmp eax, r15d
+ jb L_clip_window ; /* if (dist > nbytes) 4.2% */
+
+ mov ecx, r14d ; /* ecx = len */
+ mov rsi, rdi
+ sub rsi, r15 ; /* from = out - dist */
+
+ sar ecx, 1
+ jnc L_copy_two ; /* if len % 2 == 0 */
+
+ rep movsw
+ mov al, [rsi]
+ mov [rdi], al
+ inc rdi
+
+ mov rsi, r8 ; /* move in back to %rsi, toss from */
+ jmp L_while_test
+
+L_copy_two:
+ rep movsw
+ mov rsi, r8 ; /* move in back to %rsi, toss from */
+ jmp L_while_test
+
+ALIGN 4
+L_check_dist_one:
+ cmp r15d, 1 ; /* if dist 1, is a memset */
+ jne L_check_window
+ cmp [rsp+40], rdi ; /* if out == beg, outside window */
+ je L_check_window
+
+ mov ecx, r14d ; /* ecx = len */
+ mov al, [rdi-1]
+ mov ah, al
+
+ sar ecx, 1
+ jnc L_set_two
+ mov [rdi], al
+ inc rdi
+
+L_set_two:
+ rep stosw
+ jmp L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+ test al, 64
+ jnz L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx ; /* eax &= hold */
+ add eax, r14d ; /* eax += len */
+ mov eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+ jmp L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+ test al, 64
+ jnz L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+ xor eax, eax
+ inc eax
+ shl eax, cl
+ dec eax
+ and eax, edx ; /* eax &= hold */
+ add eax, r15d ; /* eax += dist */
+ mov eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+ jmp L_dodist
+
+ALIGN 4
+L_clip_window:
+ mov ecx, eax ; /* ecx = nbytes */
+ mov eax, [rsp+92] ; /* eax = wsize, prepare for dist cmp */
+ neg ecx ; /* nbytes = -nbytes */
+
+ cmp eax, r15d
+ jb L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+ add ecx, r15d ; /* nbytes = dist - nbytes */
+ cmp dword ptr [rsp+96], 0
+ jne L_wrap_around_window ; /* if (write != 0) */
+
+ mov rsi, [rsp+56] ; /* from = window */
+ sub eax, ecx ; /* eax -= nbytes */
+ add rsi, rax ; /* from += wsize - nbytes */
+
+ mov eax, r14d ; /* eax = len */
+ cmp r14d, ecx
+ jbe L_do_copy ; /* if (nbytes >= len) */
+
+ sub eax, ecx ; /* eax -= nbytes */
+ rep movsb
+ mov rsi, rdi
+ sub rsi, r15 ; /* from = &out[ -dist ] */
+ jmp L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+ mov eax, [rsp+96] ; /* eax = write */
+ cmp ecx, eax
+ jbe L_contiguous_in_window ; /* if (write >= nbytes) */
+
+ mov esi, [rsp+92] ; /* from = wsize */
+ add rsi, [rsp+56] ; /* from += window */
+ add rsi, rax ; /* from += write */
+ sub rsi, rcx ; /* from -= nbytes */
+ sub ecx, eax ; /* nbytes -= write */
+
+ mov eax, r14d ; /* eax = len */
+ cmp eax, ecx
+ jbe L_do_copy ; /* if (nbytes >= len) */
+
+ sub eax, ecx ; /* len -= nbytes */
+ rep movsb
+ mov rsi, [rsp+56] ; /* from = window */
+ mov ecx, [rsp+96] ; /* nbytes = write */
+ cmp eax, ecx
+ jbe L_do_copy ; /* if (nbytes >= len) */
+
+ sub eax, ecx ; /* len -= nbytes */
+ rep movsb
+ mov rsi, rdi
+ sub rsi, r15 ; /* from = out - dist */
+ jmp L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+ mov rsi, [rsp+56] ; /* rsi = window */
+ add rsi, rax
+ sub rsi, rcx ; /* from += write - nbytes */
+
+ mov eax, r14d ; /* eax = len */
+ cmp eax, ecx
+ jbe L_do_copy ; /* if (nbytes >= len) */
+
+ sub eax, ecx ; /* len -= nbytes */
+ rep movsb
+ mov rsi, rdi
+ sub rsi, r15 ; /* from = out - dist */
+ jmp L_do_copy ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+ mov ecx, eax ; /* ecx = len */
+ rep movsb
+
+ mov rsi, r8 ; /* move in back to %esi, toss from */
+ jmp L_while_test
+
+L_test_for_end_of_block:
+ test al, 32
+ jz L_invalid_literal_length_code
+ mov dword ptr [rsp+116], 1
+ jmp L_break_loop_with_status
+
+L_invalid_literal_length_code:
+ mov dword ptr [rsp+116], 2
+ jmp L_break_loop_with_status
+
+L_invalid_distance_code:
+ mov dword ptr [rsp+116], 3
+ jmp L_break_loop_with_status
+
+L_invalid_distance_too_far:
+ mov dword ptr [rsp+116], 4
+ jmp L_break_loop_with_status
+
+L_break_loop:
+ mov dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+ mov [rsp+16], rsi ; /* in */
+ mov [rsp+32], rdi ; /* out */
+ mov [rsp+88], ebx ; /* bits */
+ mov [rsp+80], rdx ; /* hold */
+
+ mov rax, [rsp] ; /* restore rbp and rsp */
+ mov rbp, [rsp+8]
+ mov rsp, rax
+
+
+
+ mov rsi,[rsp-8]
+ mov rdi,[rsp-16]
+ mov r12,[rsp-24]
+ mov r13,[rsp-32]
+ mov r14,[rsp-40]
+ mov r15,[rsp-48]
+ mov rbx,[rsp-56]
+
+ ret 0
+; :
+; : "m" (ar)
+; : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+; "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+; );
+
+inffas8664fnc ENDP
+;_TEXT ENDS
+END
--- /dev/null
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+ assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+ original function from Mark Adler
+
+Use instructions
+----------------
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory. You can also get object files here:
+
+ http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+ http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
--- /dev/null
+ml /coff /Zi /c /Flmatch686.lst match686.asm
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm
--- /dev/null
+;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding
+; *
+; * inffas32.asm is derivated from inffas86.c, with translation of assembly code
+; *
+; * Copyright (C) 1995-2003 Mark Adler
+; * For conditions of distribution and use, see copyright notice in zlib.h
+; *
+; * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+; * Please use the copyright conditions above.
+; *
+; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+; * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at
+; * the moment. I have successfully compiled and tested this code with gcc2.96,
+; * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S
+; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+; * enabled. I will attempt to merge the MMX code into this version. Newer
+; * versions of this and inffast.S can be found at
+; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+; *
+; * 2005 : modification by Gilles Vollant
+; */
+; For Visual C++ 4.x and higher and ML 6.x and higher
+; ml.exe is in directory \MASM611C of Win95 DDK
+; ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+; and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+;
+; compile with command line option
+; ml /coff /Zi /c /Flinffas32.lst inffas32.asm
+
+; if you define NO_GZIP (see inflate.h), compile with
+; ml /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm
+
+
+; zlib122sup is 0 fort zlib 1.2.2.1 and lower
+; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head
+; in inflate_state in inflate.h)
+zlib1222sup equ 8
+
+
+IFDEF GUNZIP
+ INFLATE_MODE_TYPE equ 11
+ INFLATE_MODE_BAD equ 26
+ELSE
+ IFNDEF NO_GUNZIP
+ INFLATE_MODE_TYPE equ 11
+ INFLATE_MODE_BAD equ 26
+ ELSE
+ INFLATE_MODE_TYPE equ 3
+ INFLATE_MODE_BAD equ 17
+ ENDIF
+ENDIF
+
+
+; 75 "inffast.S"
+;FILE "inffast.S"
+
+;;;GLOBAL _inflate_fast
+
+;;;SECTION .text
+
+
+
+ .586p
+ .mmx
+
+ name inflate_fast_x86
+ .MODEL FLAT
+
+_DATA segment
+inflate_fast_use_mmx:
+ dd 1
+
+
+_TEXT segment
+
+
+
+ALIGN 4
+ db 'Fast decoding Code from Chris Anderson'
+ db 0
+
+ALIGN 4
+invalid_literal_length_code_msg:
+ db 'invalid literal/length code'
+ db 0
+
+ALIGN 4
+invalid_distance_code_msg:
+ db 'invalid distance code'
+ db 0
+
+ALIGN 4
+invalid_distance_too_far_msg:
+ db 'invalid distance too far back'
+ db 0
+
+
+ALIGN 4
+inflate_fast_mask:
+dd 0
+dd 1
+dd 3
+dd 7
+dd 15
+dd 31
+dd 63
+dd 127
+dd 255
+dd 511
+dd 1023
+dd 2047
+dd 4095
+dd 8191
+dd 16383
+dd 32767
+dd 65535
+dd 131071
+dd 262143
+dd 524287
+dd 1048575
+dd 2097151
+dd 4194303
+dd 8388607
+dd 16777215
+dd 33554431
+dd 67108863
+dd 134217727
+dd 268435455
+dd 536870911
+dd 1073741823
+dd 2147483647
+dd 4294967295
+
+
+mode_state equ 0 ;/* state->mode */
+wsize_state equ (32+zlib1222sup) ;/* state->wsize */
+write_state equ (36+4+zlib1222sup) ;/* state->write */
+window_state equ (40+4+zlib1222sup) ;/* state->window */
+hold_state equ (44+4+zlib1222sup) ;/* state->hold */
+bits_state equ (48+4+zlib1222sup) ;/* state->bits */
+lencode_state equ (64+4+zlib1222sup) ;/* state->lencode */
+distcode_state equ (68+4+zlib1222sup) ;/* state->distcode */
+lenbits_state equ (72+4+zlib1222sup) ;/* state->lenbits */
+distbits_state equ (76+4+zlib1222sup) ;/* state->distbits */
+
+
+;;SECTION .text
+; 205 "inffast.S"
+;GLOBAL inflate_fast_use_mmx
+
+;SECTION .data
+
+
+; GLOBAL inflate_fast_use_mmx:object
+;.size inflate_fast_use_mmx, 4
+; 226 "inffast.S"
+;SECTION .text
+
+ALIGN 4
+_inflate_fast proc near
+.FPO (16, 4, 0, 0, 1, 0)
+ push edi
+ push esi
+ push ebp
+ push ebx
+ pushfd
+ sub esp,64
+ cld
+
+
+
+
+ mov esi, [esp+88]
+ mov edi, [esi+28]
+
+
+
+
+
+
+
+ mov edx, [esi+4]
+ mov eax, [esi+0]
+
+ add edx,eax
+ sub edx,11
+
+ mov [esp+44],eax
+ mov [esp+20],edx
+
+ mov ebp, [esp+92]
+ mov ecx, [esi+16]
+ mov ebx, [esi+12]
+
+ sub ebp,ecx
+ neg ebp
+ add ebp,ebx
+
+ sub ecx,257
+ add ecx,ebx
+
+ mov [esp+60],ebx
+ mov [esp+40],ebp
+ mov [esp+16],ecx
+; 285 "inffast.S"
+ mov eax, [edi+lencode_state]
+ mov ecx, [edi+distcode_state]
+
+ mov [esp+8],eax
+ mov [esp+12],ecx
+
+ mov eax,1
+ mov ecx, [edi+lenbits_state]
+ shl eax,cl
+ dec eax
+ mov [esp+0],eax
+
+ mov eax,1
+ mov ecx, [edi+distbits_state]
+ shl eax,cl
+ dec eax
+ mov [esp+4],eax
+
+ mov eax, [edi+wsize_state]
+ mov ecx, [edi+write_state]
+ mov edx, [edi+window_state]
+
+ mov [esp+52],eax
+ mov [esp+48],ecx
+ mov [esp+56],edx
+
+ mov ebp, [edi+hold_state]
+ mov ebx, [edi+bits_state]
+; 321 "inffast.S"
+ mov esi, [esp+44]
+ mov ecx, [esp+20]
+ cmp ecx,esi
+ ja L_align_long
+
+ add ecx,11
+ sub ecx,esi
+ mov eax,12
+ sub eax,ecx
+ lea edi, [esp+28]
+ rep movsb
+ mov ecx,eax
+ xor eax,eax
+ rep stosb
+ lea esi, [esp+28]
+ mov [esp+20],esi
+ jmp L_is_aligned
+
+
+L_align_long:
+ test esi,3
+ jz L_is_aligned
+ xor eax,eax
+ mov al, [esi]
+ inc esi
+ mov ecx,ebx
+ add ebx,8
+ shl eax,cl
+ or ebp,eax
+ jmp L_align_long
+
+L_is_aligned:
+ mov edi, [esp+60]
+; 366 "inffast.S"
+L_check_mmx:
+ cmp dword ptr [inflate_fast_use_mmx],2
+ je L_init_mmx
+ ja L_do_loop
+
+ push eax
+ push ebx
+ push ecx
+ push edx
+ pushfd
+ mov eax, [esp]
+ xor dword ptr [esp],0200000h
+
+
+
+
+ popfd
+ pushfd
+ pop edx
+ xor edx,eax
+ jz L_dont_use_mmx
+ xor eax,eax
+ cpuid
+ cmp ebx,0756e6547h
+ jne L_dont_use_mmx
+ cmp ecx,06c65746eh
+ jne L_dont_use_mmx
+ cmp edx,049656e69h
+ jne L_dont_use_mmx
+ mov eax,1
+ cpuid
+ shr eax,8
+ and eax,15
+ cmp eax,6
+ jne L_dont_use_mmx
+ test edx,0800000h
+ jnz L_use_mmx
+ jmp L_dont_use_mmx
+L_use_mmx:
+ mov dword ptr [inflate_fast_use_mmx],2
+ jmp L_check_mmx_pop
+L_dont_use_mmx:
+ mov dword ptr [inflate_fast_use_mmx],3
+L_check_mmx_pop:
+ pop edx
+ pop ecx
+ pop ebx
+ pop eax
+ jmp L_check_mmx
+; 426 "inffast.S"
+ALIGN 4
+L_do_loop:
+; 437 "inffast.S"
+ cmp bl,15
+ ja L_get_length_code
+
+ xor eax,eax
+ lodsw
+ mov cl,bl
+ add bl,16
+ shl eax,cl
+ or ebp,eax
+
+L_get_length_code:
+ mov edx, [esp+0]
+ mov ecx, [esp+8]
+ and edx,ebp
+ mov eax, [ecx+edx*4]
+
+L_dolen:
+
+
+
+
+
+
+ mov cl,ah
+ sub bl,ah
+ shr ebp,cl
+
+
+
+
+
+
+ test al,al
+ jnz L_test_for_length_base
+
+ shr eax,16
+ stosb
+
+L_while_test:
+
+
+ cmp [esp+16],edi
+ jbe L_break_loop
+
+ cmp [esp+20],esi
+ ja L_do_loop
+ jmp L_break_loop
+
+L_test_for_length_base:
+; 502 "inffast.S"
+ mov edx,eax
+ shr edx,16
+ mov cl,al
+
+ test al,16
+ jz L_test_for_second_level_length
+ and cl,15
+ jz L_save_len
+ cmp bl,cl
+ jae L_add_bits_to_len
+
+ mov ch,cl
+ xor eax,eax
+ lodsw
+ mov cl,bl
+ add bl,16
+ shl eax,cl
+ or ebp,eax
+ mov cl,ch
+
+L_add_bits_to_len:
+ mov eax,1
+ shl eax,cl
+ dec eax
+ sub bl,cl
+ and eax,ebp
+ shr ebp,cl
+ add edx,eax
+
+L_save_len:
+ mov [esp+24],edx
+
+
+L_decode_distance:
+; 549 "inffast.S"
+ cmp bl,15
+ ja L_get_distance_code
+
+ xor eax,eax
+ lodsw
+ mov cl,bl
+ add bl,16
+ shl eax,cl
+ or ebp,eax
+
+L_get_distance_code:
+ mov edx, [esp+4]
+ mov ecx, [esp+12]
+ and edx,ebp
+ mov eax, [ecx+edx*4]
+
+
+L_dodist:
+ mov edx,eax
+ shr edx,16
+ mov cl,ah
+ sub bl,ah
+ shr ebp,cl
+; 584 "inffast.S"
+ mov cl,al
+
+ test al,16
+ jz L_test_for_second_level_dist
+ and cl,15
+ jz L_check_dist_one
+ cmp bl,cl
+ jae L_add_bits_to_dist
+
+ mov ch,cl
+ xor eax,eax
+ lodsw
+ mov cl,bl
+ add bl,16
+ shl eax,cl
+ or ebp,eax
+ mov cl,ch
+
+L_add_bits_to_dist:
+ mov eax,1
+ shl eax,cl
+ dec eax
+ sub bl,cl
+ and eax,ebp
+ shr ebp,cl
+ add edx,eax
+ jmp L_check_window
+
+L_check_window:
+; 625 "inffast.S"
+ mov [esp+44],esi
+ mov eax,edi
+ sub eax, [esp+40]
+
+ cmp eax,edx
+ jb L_clip_window
+
+ mov ecx, [esp+24]
+ mov esi,edi
+ sub esi,edx
+
+ sub ecx,3
+ mov al, [esi]
+ mov [edi],al
+ mov al, [esi+1]
+ mov dl, [esi+2]
+ add esi,3
+ mov [edi+1],al
+ mov [edi+2],dl
+ add edi,3
+ rep movsb
+
+ mov esi, [esp+44]
+ jmp L_while_test
+
+ALIGN 4
+L_check_dist_one:
+ cmp edx,1
+ jne L_check_window
+ cmp [esp+40],edi
+ je L_check_window
+
+ dec edi
+ mov ecx, [esp+24]
+ mov al, [edi]
+ sub ecx,3
+
+ mov [edi+1],al
+ mov [edi+2],al
+ mov [edi+3],al
+ add edi,4
+ rep stosb
+
+ jmp L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+
+
+
+
+ test al,64
+ jnz L_test_for_end_of_block
+
+ mov eax,1
+ shl eax,cl
+ dec eax
+ and eax,ebp
+ add eax,edx
+ mov edx, [esp+8]
+ mov eax, [edx+eax*4]
+ jmp L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+
+
+
+
+ test al,64
+ jnz L_invalid_distance_code
+
+ mov eax,1
+ shl eax,cl
+ dec eax
+ and eax,ebp
+ add eax,edx
+ mov edx, [esp+12]
+ mov eax, [edx+eax*4]
+ jmp L_dodist
+
+ALIGN 4
+L_clip_window:
+; 721 "inffast.S"
+ mov ecx,eax
+ mov eax, [esp+52]
+ neg ecx
+ mov esi, [esp+56]
+
+ cmp eax,edx
+ jb L_invalid_distance_too_far
+
+ add ecx,edx
+ cmp dword ptr [esp+48],0
+ jne L_wrap_around_window
+
+ sub eax,ecx
+ add esi,eax
+; 749 "inffast.S"
+ mov eax, [esp+24]
+ cmp eax,ecx
+ jbe L_do_copy1
+
+ sub eax,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,edx
+ jmp L_do_copy1
+
+ cmp eax,ecx
+ jbe L_do_copy1
+
+ sub eax,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,edx
+ jmp L_do_copy1
+
+L_wrap_around_window:
+; 793 "inffast.S"
+ mov eax, [esp+48]
+ cmp ecx,eax
+ jbe L_contiguous_in_window
+
+ add esi, [esp+52]
+ add esi,eax
+ sub esi,ecx
+ sub ecx,eax
+
+
+ mov eax, [esp+24]
+ cmp eax,ecx
+ jbe L_do_copy1
+
+ sub eax,ecx
+ rep movsb
+ mov esi, [esp+56]
+ mov ecx, [esp+48]
+ cmp eax,ecx
+ jbe L_do_copy1
+
+ sub eax,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,edx
+ jmp L_do_copy1
+
+L_contiguous_in_window:
+; 836 "inffast.S"
+ add esi,eax
+ sub esi,ecx
+
+
+ mov eax, [esp+24]
+ cmp eax,ecx
+ jbe L_do_copy1
+
+ sub eax,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,edx
+
+L_do_copy1:
+; 862 "inffast.S"
+ mov ecx,eax
+ rep movsb
+
+ mov esi, [esp+44]
+ jmp L_while_test
+; 878 "inffast.S"
+ALIGN 4
+L_init_mmx:
+ emms
+
+
+
+
+
+ movd mm0,ebp
+ mov ebp,ebx
+; 896 "inffast.S"
+ movd mm4,dword ptr [esp+0]
+ movq mm3,mm4
+ movd mm5,dword ptr [esp+4]
+ movq mm2,mm5
+ pxor mm1,mm1
+ mov ebx, [esp+8]
+ jmp L_do_loop_mmx
+
+ALIGN 4
+L_do_loop_mmx:
+ psrlq mm0,mm1
+
+ cmp ebp,32
+ ja L_get_length_code_mmx
+
+ movd mm6,ebp
+ movd mm7,dword ptr [esi]
+ add esi,4
+ psllq mm7,mm6
+ add ebp,32
+ por mm0,mm7
+
+L_get_length_code_mmx:
+ pand mm4,mm0
+ movd eax,mm4
+ movq mm4,mm3
+ mov eax, [ebx+eax*4]
+
+L_dolen_mmx:
+ movzx ecx,ah
+ movd mm1,ecx
+ sub ebp,ecx
+
+ test al,al
+ jnz L_test_for_length_base_mmx
+
+ shr eax,16
+ stosb
+
+L_while_test_mmx:
+
+
+ cmp [esp+16],edi
+ jbe L_break_loop
+
+ cmp [esp+20],esi
+ ja L_do_loop_mmx
+ jmp L_break_loop
+
+L_test_for_length_base_mmx:
+
+ mov edx,eax
+ shr edx,16
+
+ test al,16
+ jz L_test_for_second_level_length_mmx
+ and eax,15
+ jz L_decode_distance_mmx
+
+ psrlq mm0,mm1
+ movd mm1,eax
+ movd ecx,mm0
+ sub ebp,eax
+ and ecx, [inflate_fast_mask+eax*4]
+ add edx,ecx
+
+L_decode_distance_mmx:
+ psrlq mm0,mm1
+
+ cmp ebp,32
+ ja L_get_dist_code_mmx
+
+ movd mm6,ebp
+ movd mm7,dword ptr [esi]
+ add esi,4
+ psllq mm7,mm6
+ add ebp,32
+ por mm0,mm7
+
+L_get_dist_code_mmx:
+ mov ebx, [esp+12]
+ pand mm5,mm0
+ movd eax,mm5
+ movq mm5,mm2
+ mov eax, [ebx+eax*4]
+
+L_dodist_mmx:
+
+ movzx ecx,ah
+ mov ebx,eax
+ shr ebx,16
+ sub ebp,ecx
+ movd mm1,ecx
+
+ test al,16
+ jz L_test_for_second_level_dist_mmx
+ and eax,15
+ jz L_check_dist_one_mmx
+
+L_add_bits_to_dist_mmx:
+ psrlq mm0,mm1
+ movd mm1,eax
+ movd ecx,mm0
+ sub ebp,eax
+ and ecx, [inflate_fast_mask+eax*4]
+ add ebx,ecx
+
+L_check_window_mmx:
+ mov [esp+44],esi
+ mov eax,edi
+ sub eax, [esp+40]
+
+ cmp eax,ebx
+ jb L_clip_window_mmx
+
+ mov ecx,edx
+ mov esi,edi
+ sub esi,ebx
+
+ sub ecx,3
+ mov al, [esi]
+ mov [edi],al
+ mov al, [esi+1]
+ mov dl, [esi+2]
+ add esi,3
+ mov [edi+1],al
+ mov [edi+2],dl
+ add edi,3
+ rep movsb
+
+ mov esi, [esp+44]
+ mov ebx, [esp+8]
+ jmp L_while_test_mmx
+
+ALIGN 4
+L_check_dist_one_mmx:
+ cmp ebx,1
+ jne L_check_window_mmx
+ cmp [esp+40],edi
+ je L_check_window_mmx
+
+ dec edi
+ mov ecx,edx
+ mov al, [edi]
+ sub ecx,3
+
+ mov [edi+1],al
+ mov [edi+2],al
+ mov [edi+3],al
+ add edi,4
+ rep stosb
+
+ mov ebx, [esp+8]
+ jmp L_while_test_mmx
+
+ALIGN 4
+L_test_for_second_level_length_mmx:
+ test al,64
+ jnz L_test_for_end_of_block
+
+ and eax,15
+ psrlq mm0,mm1
+ movd ecx,mm0
+ and ecx, [inflate_fast_mask+eax*4]
+ add ecx,edx
+ mov eax, [ebx+ecx*4]
+ jmp L_dolen_mmx
+
+ALIGN 4
+L_test_for_second_level_dist_mmx:
+ test al,64
+ jnz L_invalid_distance_code
+
+ and eax,15
+ psrlq mm0,mm1
+ movd ecx,mm0
+ and ecx, [inflate_fast_mask+eax*4]
+ mov eax, [esp+12]
+ add ecx,ebx
+ mov eax, [eax+ecx*4]
+ jmp L_dodist_mmx
+
+ALIGN 4
+L_clip_window_mmx:
+
+ mov ecx,eax
+ mov eax, [esp+52]
+ neg ecx
+ mov esi, [esp+56]
+
+ cmp eax,ebx
+ jb L_invalid_distance_too_far
+
+ add ecx,ebx
+ cmp dword ptr [esp+48],0
+ jne L_wrap_around_window_mmx
+
+ sub eax,ecx
+ add esi,eax
+
+ cmp edx,ecx
+ jbe L_do_copy1_mmx
+
+ sub edx,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,ebx
+ jmp L_do_copy1_mmx
+
+ cmp edx,ecx
+ jbe L_do_copy1_mmx
+
+ sub edx,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,ebx
+ jmp L_do_copy1_mmx
+
+L_wrap_around_window_mmx:
+
+ mov eax, [esp+48]
+ cmp ecx,eax
+ jbe L_contiguous_in_window_mmx
+
+ add esi, [esp+52]
+ add esi,eax
+ sub esi,ecx
+ sub ecx,eax
+
+
+ cmp edx,ecx
+ jbe L_do_copy1_mmx
+
+ sub edx,ecx
+ rep movsb
+ mov esi, [esp+56]
+ mov ecx, [esp+48]
+ cmp edx,ecx
+ jbe L_do_copy1_mmx
+
+ sub edx,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,ebx
+ jmp L_do_copy1_mmx
+
+L_contiguous_in_window_mmx:
+
+ add esi,eax
+ sub esi,ecx
+
+
+ cmp edx,ecx
+ jbe L_do_copy1_mmx
+
+ sub edx,ecx
+ rep movsb
+ mov esi,edi
+ sub esi,ebx
+
+L_do_copy1_mmx:
+
+
+ mov ecx,edx
+ rep movsb
+
+ mov esi, [esp+44]
+ mov ebx, [esp+8]
+ jmp L_while_test_mmx
+; 1174 "inffast.S"
+L_invalid_distance_code:
+
+
+
+
+
+ mov ecx, invalid_distance_code_msg
+ mov edx,INFLATE_MODE_BAD
+ jmp L_update_stream_state
+
+L_test_for_end_of_block:
+
+
+
+
+
+ test al,32
+ jz L_invalid_literal_length_code
+
+ mov ecx,0
+ mov edx,INFLATE_MODE_TYPE
+ jmp L_update_stream_state
+
+L_invalid_literal_length_code:
+
+
+
+
+
+ mov ecx, invalid_literal_length_code_msg
+ mov edx,INFLATE_MODE_BAD
+ jmp L_update_stream_state
+
+L_invalid_distance_too_far:
+
+
+
+ mov esi, [esp+44]
+ mov ecx, invalid_distance_too_far_msg
+ mov edx,INFLATE_MODE_BAD
+ jmp L_update_stream_state
+
+L_update_stream_state:
+
+ mov eax, [esp+88]
+ test ecx,ecx
+ jz L_skip_msg
+ mov [eax+24],ecx
+L_skip_msg:
+ mov eax, [eax+28]
+ mov [eax+mode_state],edx
+ jmp L_break_loop
+
+ALIGN 4
+L_break_loop:
+; 1243 "inffast.S"
+ cmp dword ptr [inflate_fast_use_mmx],2
+ jne L_update_next_in
+
+
+
+ mov ebx,ebp
+
+L_update_next_in:
+; 1266 "inffast.S"
+ mov eax, [esp+88]
+ mov ecx,ebx
+ mov edx, [eax+28]
+ shr ecx,3
+ sub esi,ecx
+ shl ecx,3
+ sub ebx,ecx
+ mov [eax+12],edi
+ mov [edx+bits_state],ebx
+ mov ecx,ebx
+
+ lea ebx, [esp+28]
+ cmp [esp+20],ebx
+ jne L_buf_not_used
+
+ sub esi,ebx
+ mov ebx, [eax+0]
+ mov [esp+20],ebx
+ add esi,ebx
+ mov ebx, [eax+4]
+ sub ebx,11
+ add [esp+20],ebx
+
+L_buf_not_used:
+ mov [eax+0],esi
+
+ mov ebx,1
+ shl ebx,cl
+ dec ebx
+
+
+
+
+
+ cmp dword ptr [inflate_fast_use_mmx],2
+ jne L_update_hold
+
+
+
+ psrlq mm0,mm1
+ movd ebp,mm0
+
+ emms
+
+L_update_hold:
+
+
+
+ and ebp,ebx
+ mov [edx+hold_state],ebp
+
+
+
+
+ mov ebx, [esp+20]
+ cmp ebx,esi
+ jbe L_last_is_smaller
+
+ sub ebx,esi
+ add ebx,11
+ mov [eax+4],ebx
+ jmp L_fixup_out
+L_last_is_smaller:
+ sub esi,ebx
+ neg esi
+ add esi,11
+ mov [eax+4],esi
+
+
+
+
+L_fixup_out:
+
+ mov ebx, [esp+16]
+ cmp ebx,edi
+ jbe L_end_is_smaller
+
+ sub ebx,edi
+ add ebx,257
+ mov [eax+16],ebx
+ jmp L_done
+L_end_is_smaller:
+ sub edi,ebx
+ neg edi
+ add edi,257
+ mov [eax+16],edi
+
+
+
+
+
+L_done:
+ add esp,64
+ popfd
+ pop ebx
+ pop ebp
+ pop esi
+ pop edi
+ ret
+_inflate_fast endp
+
+_TEXT ends
+end
--- /dev/null
+; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by converting match686.S from Brian Raiter
+; for MASM. This is as assembly version of longest_match
+; from Jean-loup Gailly in deflate.c
+;
+; http://www.zlib.net
+; http://www.winimage.com/zLibDll
+; http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+; ml.exe is distributed in
+; http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+;
+; this file contain two implementation of longest_match
+;
+; this longest_match was written by Brian raiter (1998), optimized for Pentium Pro
+; (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom)
+;
+; for using an assembly version of longest_match, you need define ASMV in project
+;
+; compile the asm file running
+; ml /coff /Zi /c /Flmatch686.lst match686.asm
+; and do not include match686.obj in your project
+;
+; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for
+; Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor
+; with autoselect (with cpu detection code)
+; if you want support the old pentium optimization, you can still use these version
+;
+; this file is not optimized for old pentium, but it compatible with all x86 32 bits
+; processor (starting 80386)
+;
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
+
+;uInt longest_match(s, cur_match)
+; deflate_state *s;
+; IPos cur_match; /* current match */
+
+ NbStack equ 76
+ cur_match equ dword ptr[esp+NbStack-0]
+ str_s equ dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+ adrret equ dword ptr[esp+NbStack-8]
+ pushebp equ dword ptr[esp+NbStack-12]
+ pushedi equ dword ptr[esp+NbStack-16]
+ pushesi equ dword ptr[esp+NbStack-20]
+ pushebx equ dword ptr[esp+NbStack-24]
+
+ chain_length equ dword ptr [esp+NbStack-28]
+ limit equ dword ptr [esp+NbStack-32]
+ best_len equ dword ptr [esp+NbStack-36]
+ window equ dword ptr [esp+NbStack-40]
+ prev equ dword ptr [esp+NbStack-44]
+ scan_start equ word ptr [esp+NbStack-48]
+ wmask equ dword ptr [esp+NbStack-52]
+ match_start_ptr equ dword ptr [esp+NbStack-56]
+ nice_match equ dword ptr [esp+NbStack-60]
+ scan equ dword ptr [esp+NbStack-64]
+
+ windowlen equ dword ptr [esp+NbStack-68]
+ match_start equ dword ptr [esp+NbStack-72]
+ strend equ dword ptr [esp+NbStack-76]
+ NbStackAdd equ (NbStack-24)
+
+ .386p
+
+ name gvmatch
+ .MODEL FLAT
+
+
+
+; all the +zlib1222add offsets are due to the addition of fields
+; in zlib in the deflate_state structure since the asm code was first written
+; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+ zlib1222add equ 8
+
+; Note : these value are good with a 8 bytes boundary pack structure
+ dep_chain_length equ 74h+zlib1222add
+ dep_window equ 30h+zlib1222add
+ dep_strstart equ 64h+zlib1222add
+ dep_prev_length equ 70h+zlib1222add
+ dep_nice_match equ 88h+zlib1222add
+ dep_w_size equ 24h+zlib1222add
+ dep_prev equ 38h+zlib1222add
+ dep_w_mask equ 2ch+zlib1222add
+ dep_good_match equ 84h+zlib1222add
+ dep_match_start equ 68h+zlib1222add
+ dep_lookahead equ 6ch+zlib1222add
+
+
+_TEXT segment
+
+IFDEF NOUNDERLINE
+ public longest_match
+ public match_init
+ELSE
+ public _longest_match
+ public _match_init
+ENDIF
+
+ MAX_MATCH equ 258
+ MIN_MATCH equ 3
+ MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1)
+
+
+
+MAX_MATCH equ 258
+MIN_MATCH equ 3
+MIN_LOOKAHEAD equ (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8_ equ ((MAX_MATCH + 7) AND 0FFF0h)
+
+
+;;; stack frame offsets
+
+chainlenwmask equ esp + 0 ; high word: current chain len
+ ; low word: s->wmask
+window equ esp + 4 ; local copy of s->window
+windowbestlen equ esp + 8 ; s->window + bestlen
+scanstart equ esp + 16 ; first two bytes of string
+scanend equ esp + 12 ; last two bytes of string
+scanalign equ esp + 20 ; dword-misalignment of string
+nicematch equ esp + 24 ; a good enough match size
+bestlen equ esp + 28 ; size of best match so far
+scan equ esp + 32 ; ptr to string wanting match
+
+LocalVarsSize equ 36
+; saved ebx byte esp + 36
+; saved edi byte esp + 40
+; saved esi byte esp + 44
+; saved ebp byte esp + 48
+; return address byte esp + 52
+deflatestate equ esp + 56 ; the function arguments
+curmatch equ esp + 60
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+dsWSize equ 36+zlib1222add
+dsWMask equ 44+zlib1222add
+dsWindow equ 48+zlib1222add
+dsPrev equ 56+zlib1222add
+dsMatchLen equ 88+zlib1222add
+dsPrevMatch equ 92+zlib1222add
+dsStrStart equ 100+zlib1222add
+dsMatchStart equ 104+zlib1222add
+dsLookahead equ 108+zlib1222add
+dsPrevLen equ 112+zlib1222add
+dsMaxChainLen equ 116+zlib1222add
+dsGoodMatch equ 132+zlib1222add
+dsNiceMatch equ 136+zlib1222add
+
+
+;;; match686.asm -- Pentium-Pro-optimized version of longest_match()
+;;; Written for zlib 1.1.2
+;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
+;;;
+;;
+;; This software is provided 'as-is', without any express or implied
+;; warranty. In no event will the authors be held liable for any damages
+;; arising from the use of this software.
+;;
+;; Permission is granted to anyone to use this software for any purpose,
+;; including commercial applications, and to alter it and redistribute it
+;; freely, subject to the following restrictions:
+;;
+;; 1. The origin of this software must not be misrepresented; you must not
+;; claim that you wrote the original software. If you use this software
+;; in a product, an acknowledgment in the product documentation would be
+;; appreciated but is not required.
+;; 2. Altered source versions must be plainly marked as such, and must not be
+;; misrepresented as being the original software
+;; 3. This notice may not be removed or altered from any source distribution.
+;;
+
+;GLOBAL _longest_match, _match_init
+
+
+;SECTION .text
+
+;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+
+;_longest_match:
+ IFDEF NOUNDERLINE
+ longest_match proc near
+ ELSE
+ _longest_match proc near
+ ENDIF
+.FPO (9, 4, 0, 0, 1, 0)
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+ push ebp
+ push edi
+ push esi
+ push ebx
+ sub esp, LocalVarsSize
+
+;;; Retrieve the function arguments. ecx will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+ mov edx, [deflatestate]
+ mov ecx, [curmatch]
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;; chain_length >>= 2;
+;;; }
+
+ mov eax, [edx + dsPrevLen]
+ mov ebx, [edx + dsGoodMatch]
+ cmp eax, ebx
+ mov eax, [edx + dsWMask]
+ mov ebx, [edx + dsMaxChainLen]
+ jl LastMatchGood
+ shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+ dec ebx
+ shl ebx, 16
+ or ebx, eax
+ mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+ mov eax, [edx + dsNiceMatch]
+ mov ebx, [edx + dsLookahead]
+ cmp ebx, eax
+ jl LookaheadLess
+ mov ebx, eax
+LookaheadLess: mov [nicematch], ebx
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+ mov esi, [edx + dsWindow]
+ mov [window], esi
+ mov ebp, [edx + dsStrStart]
+ lea edi, [esi + ebp]
+ mov [scan], edi
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+ mov eax, edi
+ neg eax
+ and eax, 3
+ mov [scanalign], eax
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+ mov eax, [edx + dsWSize]
+ sub eax, MIN_LOOKAHEAD
+ sub ebp, eax
+ jg LimitPositive
+ xor ebp, ebp
+LimitPositive:
+
+;;; int best_len = s->prev_length;
+
+ mov eax, [edx + dsPrevLen]
+ mov [bestlen], eax
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+ add esi, eax
+ mov [windowbestlen], esi
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+ movzx ebx, word ptr [edi]
+ mov [scanstart], ebx
+ movzx ebx, word ptr [edi + eax - 1]
+ mov [scanend], ebx
+ mov edi, [edx + dsPrev]
+
+;;; Jump into the main loop.
+
+ mov edx, [chainlenwmask]
+ jmp short LoopEntry
+
+align 4
+
+;;; do {
+;;; match = s->window + cur_match;
+;;; if (*(ushf*)(match+best_len-1) != scan_end ||
+;;; *(ushf*)match != scan_start) continue;
+;;; [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;; && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; ecx = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+ and ecx, edx
+ movzx ecx, word ptr [edi + ecx*2]
+ cmp ecx, ebp
+ jbe LeaveNow
+ sub edx, 00010000h
+ js LeaveNow
+LoopEntry: movzx eax, word ptr [esi + ecx - 1]
+ cmp eax, ebx
+ jnz LookupLoop
+ mov eax, [window]
+ movzx eax, word ptr [eax + ecx]
+ cmp eax, [scanstart]
+ jnz LookupLoop
+
+;;; Store the current value of chainlen.
+
+ mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+ mov esi, [window]
+ mov edi, [scan]
+ add esi, ecx
+ mov eax, [scanalign]
+ mov edx, 0fffffef8h; -(MAX_MATCH_8)
+ lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
+ lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+LoopCmps:
+ mov eax, [esi + edx]
+ xor eax, [edi + edx]
+ jnz LeaveLoopCmps
+ mov eax, [esi + edx + 4]
+ xor eax, [edi + edx + 4]
+ jnz LeaveLoopCmps4
+ add edx, 8
+ jnz LoopCmps
+ jmp short LenMaximum
+LeaveLoopCmps4: add edx, 4
+LeaveLoopCmps: test eax, 0000FFFFh
+ jnz LenLower
+ add edx, 2
+ shr eax, 16
+LenLower: sub al, 1
+ adc edx, 0
+
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+ lea eax, [edi + edx]
+ mov edi, [scan]
+ sub eax, edi
+ cmp eax, MAX_MATCH
+ jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+
+ mov edx, [deflatestate]
+ mov ebx, [bestlen]
+ cmp eax, ebx
+ jg LongerMatch
+ mov esi, [windowbestlen]
+ mov edi, [edx + dsPrev]
+ mov ebx, [scanend]
+ mov edx, [chainlenwmask]
+ jmp LookupLoop
+
+;;; s->match_start = cur_match;
+;;; best_len = len;
+;;; if (len >= nice_match) break;
+;;; scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch: mov ebx, [nicematch]
+ mov [bestlen], eax
+ mov [edx + dsMatchStart], ecx
+ cmp eax, ebx
+ jge LeaveNow
+ mov esi, [window]
+ add esi, eax
+ mov [windowbestlen], esi
+ movzx ebx, word ptr [edi + eax - 1]
+ mov edi, [edx + dsPrev]
+ mov [scanend], ebx
+ mov edx, [chainlenwmask]
+ jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum: mov edx, [deflatestate]
+ mov dword ptr [bestlen], MAX_MATCH
+ mov [edx + dsMatchStart], ecx
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+ mov edx, [deflatestate]
+ mov ebx, [bestlen]
+ mov eax, [edx + dsLookahead]
+ cmp ebx, eax
+ jg LookaheadRet
+ mov eax, ebx
+LookaheadRet:
+
+;;; Restore the stack and return from whence we came.
+
+ add esp, LocalVarsSize
+ pop ebx
+ pop esi
+ pop edi
+ pop ebp
+
+ ret
+; please don't remove this string !
+; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary!
+ db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
+
+
+ IFDEF NOUNDERLINE
+ longest_match endp
+ ELSE
+ _longest_match endp
+ ENDIF
+
+ IFDEF NOUNDERLINE
+ match_init proc near
+ ret
+ match_init endp
+ ELSE
+ _match_init proc near
+ ret
+ _match_init endp
+ ENDIF
+
+
+_TEXT ends
+end
--- /dev/null
+
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast().
+
+
+Use instructions
+----------------
+Assemble using MASM, and copy the object files into the zlib source
+directory, then run the appropriate makefile, as suggested below. You can
+donwload MASM from here:
+
+ http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+
+You can also get objects files here:
+
+ http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+Build instructions
+------------------
+* With Microsoft C and MASM:
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
+
+* With Borland C and TASM:
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
+
--- /dev/null
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o ioapi.o ../../libz.a
+
+.c.o:
+ $(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz: $(UNZ_OBJS)
+ $(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip: $(ZIP_OBJS)
+ $(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test: miniunz minizip
+ ./minizip test readme.txt
+ ./miniunz -l test.zip
+ mv readme.txt readme.old
+ ./miniunz test.zip
+
+clean:
+ /bin/rm -f *.o *~ minizip miniunz
--- /dev/null
+lib_LTLIBRARIES = libminizip.la
+
+if COND_DEMOS
+bin_PROGRAMS = miniunzip minizip
+endif
+
+zlib_top_srcdir = $(top_srcdir)/../..
+zlib_top_builddir = $(top_builddir)/../..
+
+AM_CPPFLAGS = -I$(zlib_top_srcdir)
+AM_LDFLAGS = -L$(zlib_top_builddir)
+
+if WIN32
+iowin32_src = iowin32.c
+iowin32_h = iowin32.h
+endif
+
+libminizip_la_SOURCES = \
+ ioapi.c \
+ mztools.c \
+ unzip.c \
+ zip.c \
+ ${iowin32_src}
+
+libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz
+
+minizip_includedir = $(includedir)/minizip
+minizip_include_HEADERS = \
+ crypt.h \
+ ioapi.h \
+ mztools.h \
+ unzip.h \
+ zip.h \
+ ${iowin32_h}
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = minizip.pc
+
+EXTRA_PROGRAMS = miniunzip minizip
+
+miniunzip_SOURCES = miniunz.c
+miniunzip_LDADD = libminizip.la
+
+minizip_SOURCES = minizip.c
+minizip_LDADD = libminizip.la -lz
--- /dev/null
+
+MiniZip 1.1 was derrived from MiniZip at version 1.01f
+
+Change in 1.0 (Okt 2009)
+ - **TODO - Add history**
+
--- /dev/null
+MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson
+
+Introduction
+---------------------
+MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+
+When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0.
+All possible work was done for compatibility.
+
+
+Background
+---------------------
+When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64
+support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ )
+
+That was used as a starting point. And after that ZIP64 support was added to zip.c
+some refactoring and code cleanup was also done.
+
+
+Changed from MiniZip 1.0 to MiniZip 1.1
+---------------------------------------
+* Added ZIP64 support for unzip ( by Even Rouault )
+* Added ZIP64 support for zip ( by Mathias Svensson )
+* Reverted some changed that Even Rouault did.
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+* Added BZIP Compress method for zip
+* Did some refactoring and code cleanup
+
+
+Credits
+
+ Gilles Vollant - Original MiniZip author
+ Even Rouault - ZIP64 unzip Support
+ Daniel Borca - BZip Compression method support in unzip
+ Mathias Svensson - ZIP64 zip support
+ Mathias Svensson - BZip Compression method support in zip
+
+ Resources
+
+ ZipLayout http://result42.com/projects/ZipFileLayout
+ Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+ Used when debugging and validating the creation of zip files using MiniZip64
+
+
+ ZIP App Note http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+ Zip File specification
+
+
+Notes.
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
+License
+----------------------------------------------------------
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+----------------------------------------------------------
+
--- /dev/null
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_INIT([minizip], [1.2.8], [bugzilla.redhat.com])
+AC_CONFIG_SRCDIR([minizip.c])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+
+AC_MSG_CHECKING([whether to build example programs])
+AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs]))
+AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes])
+if test "$enable_demos" = yes
+then
+ AC_MSG_RESULT([yes])
+else
+ AC_MSG_RESULT([no])
+fi
+
+case "${host}" in
+ *-mingw* | mingw*)
+ WIN32="yes"
+ ;;
+ *)
+ ;;
+esac
+AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"])
+
+
+AC_SUBST([HAVE_UNISTD_H], [0])
+AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], [])
+AC_CONFIG_FILES([Makefile minizip.pc])
+AC_OUTPUT
--- /dev/null
+/* crypt.h -- base code for crypt/uncrypt ZIPfile
+
+
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ This code is a modified version of crypting code in Infozip distribution
+
+ The encryption/decryption parts of this source code (as opposed to the
+ non-echoing password parts) were originally written in Europe. The
+ whole source package can be freely distributed, including from the USA.
+ (Prior to January 2000, re-export from the US was a violation of US law.)
+
+ This encryption code is a direct transcription of the algorithm from
+ Roger Schlafly, described by Phil Katz in the file appnote.txt. This
+ file (appnote.txt) is distributed with the PKZIP program (even in the
+ version without encryption capabilities).
+
+ If you don't need crypting in your application, just define symbols
+ NOCRYPT and NOUNCRYPT.
+
+ This code support the "Traditional PKWARE Encryption".
+
+ The new AES encryption added on Zip format by Winzip (see the page
+ http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
+ Encryption is not supported.
+*/
+
+#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
+
+/***********************************************************************
+ * Return the next byte in the pseudo-random sequence
+ */
+static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
+{
+ unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an
+ * unpredictable manner on 16-bit systems; not a problem
+ * with any known compiler so far, though */
+
+ temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
+ return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
+}
+
+/***********************************************************************
+ * Update the encryption keys with the next byte of plain text
+ */
+static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c)
+{
+ (*(pkeys+0)) = CRC32((*(pkeys+0)), c);
+ (*(pkeys+1)) += (*(pkeys+0)) & 0xff;
+ (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
+ {
+ register int keyshift = (int)((*(pkeys+1)) >> 24);
+ (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift);
+ }
+ return c;
+}
+
+
+/***********************************************************************
+ * Initialize the encryption keys and the random header according to
+ * the given password.
+ */
+static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcrc_32_tab)
+{
+ *(pkeys+0) = 305419896L;
+ *(pkeys+1) = 591751049L;
+ *(pkeys+2) = 878082192L;
+ while (*passwd != '\0') {
+ update_keys(pkeys,pcrc_32_tab,(int)*passwd);
+ passwd++;
+ }
+}
+
+#define zdecode(pkeys,pcrc_32_tab,c) \
+ (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
+
+#define zencode(pkeys,pcrc_32_tab,c,t) \
+ (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
+
+#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
+
+#define RAND_HEAD_LEN 12
+ /* "last resort" source for second part of crypt seed pattern */
+# ifndef ZCR_SEED2
+# define ZCR_SEED2 3141592654UL /* use PI as default pattern */
+# endif
+
+static int crypthead(const char* passwd, /* password string */
+ unsigned char* buf, /* where to write header */
+ int bufSize,
+ unsigned long* pkeys,
+ const z_crc_t* pcrc_32_tab,
+ unsigned long crcForCrypting)
+{
+ int n; /* index in random header */
+ int t; /* temporary */
+ int c; /* random byte */
+ unsigned char header[RAND_HEAD_LEN-2]; /* random header */
+ static unsigned calls = 0; /* ensure different random header each time */
+
+ if (bufSize<RAND_HEAD_LEN)
+ return 0;
+
+ /* First generate RAND_HEAD_LEN-2 random bytes. We encrypt the
+ * output of rand() to get less predictability, since rand() is
+ * often poorly implemented.
+ */
+ if (++calls == 1)
+ {
+ srand((unsigned)(time(NULL) ^ ZCR_SEED2));
+ }
+ init_keys(passwd, pkeys, pcrc_32_tab);
+ for (n = 0; n < RAND_HEAD_LEN-2; n++)
+ {
+ c = (rand() >> 7) & 0xff;
+ header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t);
+ }
+ /* Encrypt random header (last two bytes is high word of crc) */
+ init_keys(passwd, pkeys, pcrc_32_tab);
+ for (n = 0; n < RAND_HEAD_LEN-2; n++)
+ {
+ buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
+ }
+ buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+ buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+ return n;
+}
+
+#endif
--- /dev/null
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+*/
+
+#if defined(_WIN32) && (!(defined(_CRT_SECURE_NO_WARNINGS)))
+ #define _CRT_SECURE_NO_WARNINGS
+#endif
+
+#if defined(__APPLE__) || defined(IOAPI_NO_64)
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+#include "ioapi.h"
+
+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
+{
+ if (pfilefunc->zfile_func64.zopen64_file != NULL)
+ return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
+ else
+ {
+ return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode);
+ }
+}
+
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
+{
+ if (pfilefunc->zfile_func64.zseek64_file != NULL)
+ return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
+ else
+ {
+ uLong offsetTruncated = (uLong)offset;
+ if (offsetTruncated != offset)
+ return -1;
+ else
+ return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin);
+ }
+}
+
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
+{
+ if (pfilefunc->zfile_func64.zseek64_file != NULL)
+ return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
+ else
+ {
+ uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+ if ((tell_uLong) == MAXU32)
+ return (ZPOS64_T)-1;
+ else
+ return tell_uLong;
+ }
+}
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
+{
+ p_filefunc64_32->zfile_func64.zopen64_file = NULL;
+ p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
+ p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+ p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
+ p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
+ p_filefunc64_32->zfile_func64.ztell64_file = NULL;
+ p_filefunc64_32->zfile_func64.zseek64_file = NULL;
+ p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file;
+ p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+ p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque;
+ p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file;
+ p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file;
+}
+
+
+
+static voidpf ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
+static uLong ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+static uLong ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
+static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
+static long ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+static int ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
+static int ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
+
+static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
+{
+ FILE* file = NULL;
+ const char* mode_fopen = NULL;
+ if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+ mode_fopen = "rb";
+ else
+ if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+ mode_fopen = "r+b";
+ else
+ if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+ mode_fopen = "wb";
+
+ if ((filename!=NULL) && (mode_fopen != NULL))
+ file = fopen(filename, mode_fopen);
+ return file;
+}
+
+static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
+{
+ FILE* file = NULL;
+ const char* mode_fopen = NULL;
+ if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+ mode_fopen = "rb";
+ else
+ if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+ mode_fopen = "r+b";
+ else
+ if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+ mode_fopen = "wb";
+
+ if ((filename!=NULL) && (mode_fopen != NULL))
+ file = FOPEN_FUNC((const char*)filename, mode_fopen);
+ return file;
+}
+
+
+static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
+{
+ uLong ret;
+ ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
+ return ret;
+}
+
+static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
+{
+ uLong ret;
+ ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+ return ret;
+}
+
+static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
+{
+ long ret;
+ ret = ftell((FILE *)stream);
+ return ret;
+}
+
+
+static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
+{
+ ZPOS64_T ret;
+ ret = FTELLO_FUNC((FILE *)stream);
+ return ret;
+}
+
+static long ZCALLBACK fseek_file_func (voidpf opaque, voidpf stream, uLong offset, int origin)
+{
+ int fseek_origin=0;
+ long ret;
+ switch (origin)
+ {
+ case ZLIB_FILEFUNC_SEEK_CUR :
+ fseek_origin = SEEK_CUR;
+ break;
+ case ZLIB_FILEFUNC_SEEK_END :
+ fseek_origin = SEEK_END;
+ break;
+ case ZLIB_FILEFUNC_SEEK_SET :
+ fseek_origin = SEEK_SET;
+ break;
+ default: return -1;
+ }
+ ret = 0;
+ if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+ ret = -1;
+ return ret;
+}
+
+static long ZCALLBACK fseek64_file_func (voidpf opaque, voidpf stream, ZPOS64_T offset, int origin)
+{
+ int fseek_origin=0;
+ long ret;
+ switch (origin)
+ {
+ case ZLIB_FILEFUNC_SEEK_CUR :
+ fseek_origin = SEEK_CUR;
+ break;
+ case ZLIB_FILEFUNC_SEEK_END :
+ fseek_origin = SEEK_END;
+ break;
+ case ZLIB_FILEFUNC_SEEK_SET :
+ fseek_origin = SEEK_SET;
+ break;
+ default: return -1;
+ }
+ ret = 0;
+
+ if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
+ ret = -1;
+
+ return ret;
+}
+
+
+static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
+{
+ int ret;
+ ret = fclose((FILE *)stream);
+ return ret;
+}
+
+static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
+{
+ int ret;
+ ret = ferror((FILE *)stream);
+ return ret;
+}
+
+void fill_fopen_filefunc (pzlib_filefunc_def)
+ zlib_filefunc_def* pzlib_filefunc_def;
+{
+ pzlib_filefunc_def->zopen_file = fopen_file_func;
+ pzlib_filefunc_def->zread_file = fread_file_func;
+ pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+ pzlib_filefunc_def->ztell_file = ftell_file_func;
+ pzlib_filefunc_def->zseek_file = fseek_file_func;
+ pzlib_filefunc_def->zclose_file = fclose_file_func;
+ pzlib_filefunc_def->zerror_file = ferror_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_fopen64_filefunc (zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ pzlib_filefunc_def->zopen64_file = fopen64_file_func;
+ pzlib_filefunc_def->zread_file = fread_file_func;
+ pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+ pzlib_filefunc_def->ztell64_file = ftell64_file_func;
+ pzlib_filefunc_def->zseek64_file = fseek64_file_func;
+ pzlib_filefunc_def->zclose_file = fclose_file_func;
+ pzlib_filefunc_def->zerror_file = ferror_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
--- /dev/null
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+ Changes
+
+ Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this)
+ Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux.
+ More if/def section may be needed to support other platforms
+ Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows.
+ (but you should use iowin32.c for windows instead)
+
+*/
+
+#ifndef _ZLIBIOAPI64_H
+#define _ZLIBIOAPI64_H
+
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
+
+ // Linux needs this to support file operation on files larger then 4+GB
+ // But might need better if/def to select just the platforms that needs them.
+
+ #ifndef __USE_FILE_OFFSET64
+ #define __USE_FILE_OFFSET64
+ #endif
+ #ifndef __USE_LARGEFILE64
+ #define __USE_LARGEFILE64
+ #endif
+ #ifndef _LARGEFILE64_SOURCE
+ #define _LARGEFILE64_SOURCE
+ #endif
+ #ifndef _FILE_OFFSET_BIT
+ #define _FILE_OFFSET_BIT 64
+ #endif
+
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zlib.h"
+
+#if defined(USE_FILE32API)
+#define fopen64 fopen
+#define ftello64 ftell
+#define fseeko64 fseek
+#else
+#ifdef __FreeBSD__
+#define fopen64 fopen
+#define ftello64 ftello
+#define fseeko64 fseeko
+#endif
+#ifdef _MSC_VER
+ #define fopen64 fopen
+ #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC)))
+ #define ftello64 _ftelli64
+ #define fseeko64 _fseeki64
+ #else // old MSC
+ #define ftello64 ftell
+ #define fseeko64 fseek
+ #endif
+#endif
+#endif
+
+/*
+#ifndef ZPOS64_T
+ #ifdef _WIN32
+ #define ZPOS64_T fpos_t
+ #else
+ #include <stdint.h>
+ #define ZPOS64_T uint64_t
+ #endif
+#endif
+*/
+
+#ifdef HAVE_MINIZIP64_CONF_H
+#include "mz64conf.h"
+#endif
+
+/* a type choosen by DEFINE */
+#ifdef HAVE_64BIT_INT_CUSTOM
+typedef 64BIT_INT_CUSTOM_TYPE ZPOS64_T;
+#else
+#ifdef HAS_STDINT_H
+#include "stdint.h"
+typedef uint64_t ZPOS64_T;
+#else
+
+/* Maximum unsigned 32-bit value used as placeholder for zip64 */
+#define MAXU32 0xffffffff
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef unsigned __int64 ZPOS64_T;
+#else
+typedef unsigned long long int ZPOS64_T;
+#endif
+#endif
+#endif
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define ZLIB_FILEFUNC_SEEK_CUR (1)
+#define ZLIB_FILEFUNC_SEEK_END (2)
+#define ZLIB_FILEFUNC_SEEK_SET (0)
+
+#define ZLIB_FILEFUNC_MODE_READ (1)
+#define ZLIB_FILEFUNC_MODE_WRITE (2)
+#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
+
+#define ZLIB_FILEFUNC_MODE_EXISTING (4)
+#define ZLIB_FILEFUNC_MODE_CREATE (8)
+
+
+#ifndef ZCALLBACK
+ #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
+ #define ZCALLBACK CALLBACK
+ #else
+ #define ZCALLBACK
+ #endif
+#endif
+
+
+
+
+typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
+typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
+typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+
+typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
+typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+
+
+/* here is the "old" 32 bits structure structure */
+typedef struct zlib_filefunc_def_s
+{
+ open_file_func zopen_file;
+ read_file_func zread_file;
+ write_file_func zwrite_file;
+ tell_file_func ztell_file;
+ seek_file_func zseek_file;
+ close_file_func zclose_file;
+ testerror_file_func zerror_file;
+ voidpf opaque;
+} zlib_filefunc_def;
+
+typedef ZPOS64_T (ZCALLBACK *tell64_file_func) OF((voidpf opaque, voidpf stream));
+typedef long (ZCALLBACK *seek64_file_func) OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+typedef voidpf (ZCALLBACK *open64_file_func) OF((voidpf opaque, const void* filename, int mode));
+
+typedef struct zlib_filefunc64_def_s
+{
+ open64_file_func zopen64_file;
+ read_file_func zread_file;
+ write_file_func zwrite_file;
+ tell64_file_func ztell64_file;
+ seek64_file_func zseek64_file;
+ close_file_func zclose_file;
+ testerror_file_func zerror_file;
+ voidpf opaque;
+} zlib_filefunc64_def;
+
+void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+
+/* now internal definition, only for zip.c and unzip.h */
+typedef struct zlib_filefunc64_32_def_s
+{
+ zlib_filefunc64_def zfile_func64;
+ open_file_func zopen32_file;
+ tell_file_func ztell32_file;
+ seek_file_func zseek32_file;
+} zlib_filefunc64_32_def;
+
+
+#define ZREAD64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zread_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size))
+#define ZWRITE64(filefunc,filestream,buf,size) ((*((filefunc).zfile_func64.zwrite_file)) ((filefunc).zfile_func64.opaque,filestream,buf,size))
+//#define ZTELL64(filefunc,filestream) ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream))
+//#define ZSEEK64(filefunc,filestream,pos,mode) ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode))
+#define ZCLOSE64(filefunc,filestream) ((*((filefunc).zfile_func64.zclose_file)) ((filefunc).zfile_func64.opaque,filestream))
+#define ZERROR64(filefunc,filestream) ((*((filefunc).zfile_func64.zerror_file)) ((filefunc).zfile_func64.opaque,filestream))
+
+voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode));
+long call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin));
+ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream));
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
+
+#define ZOPEN64(filefunc,filename,mode) (call_zopen64((&(filefunc)),(filename),(mode)))
+#define ZTELL64(filefunc,filestream) (call_ztell64((&(filefunc)),(filestream)))
+#define ZSEEK64(filefunc,filestream,pos,mode) (call_zseek64((&(filefunc)),(filestream),(pos),(mode)))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/* iowin32.c -- IO base function header for compress/uncompress .zip
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+*/
+
+#include <stdlib.h>
+
+#include "zlib.h"
+#include "ioapi.h"
+#include "iowin32.h"
+
+#ifndef INVALID_HANDLE_VALUE
+#define INVALID_HANDLE_VALUE (0xFFFFFFFF)
+#endif
+
+#ifndef INVALID_SET_FILE_POINTER
+#define INVALID_SET_FILE_POINTER ((DWORD)-1)
+#endif
+
+
+#if defined(WINAPI_FAMILY_PARTITION) && (!(defined(IOWIN32_USING_WINRT_API)))
+#if WINAPI_FAMILY_PARTITION(WINAPI_PARTITION_APP)
+#define IOWIN32_USING_WINRT_API 1
+#endif
+#endif
+
+voidpf ZCALLBACK win32_open_file_func OF((voidpf opaque, const char* filename, int mode));
+uLong ZCALLBACK win32_read_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+uLong ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+ZPOS64_T ZCALLBACK win32_tell64_file_func OF((voidpf opaque, voidpf stream));
+long ZCALLBACK win32_seek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+int ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream));
+int ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream));
+
+typedef struct
+{
+ HANDLE hf;
+ int error;
+} WIN32FILE_IOWIN;
+
+
+static void win32_translate_open_mode(int mode,
+ DWORD* lpdwDesiredAccess,
+ DWORD* lpdwCreationDisposition,
+ DWORD* lpdwShareMode,
+ DWORD* lpdwFlagsAndAttributes)
+{
+ *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0;
+
+ if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+ {
+ *lpdwDesiredAccess = GENERIC_READ;
+ *lpdwCreationDisposition = OPEN_EXISTING;
+ *lpdwShareMode = FILE_SHARE_READ;
+ }
+ else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+ {
+ *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+ *lpdwCreationDisposition = OPEN_EXISTING;
+ }
+ else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+ {
+ *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+ *lpdwCreationDisposition = CREATE_ALWAYS;
+ }
+}
+
+static voidpf win32_build_iowin(HANDLE hFile)
+{
+ voidpf ret=NULL;
+
+ if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE))
+ {
+ WIN32FILE_IOWIN w32fiow;
+ w32fiow.hf = hFile;
+ w32fiow.error = 0;
+ ret = malloc(sizeof(WIN32FILE_IOWIN));
+
+ if (ret==NULL)
+ CloseHandle(hFile);
+ else
+ *((WIN32FILE_IOWIN*)ret) = w32fiow;
+ }
+ return ret;
+}
+
+voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode)
+{
+ const char* mode_fopen = NULL;
+ DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+ HANDLE hFile = NULL;
+
+ win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+#ifdef IOWIN32_USING_WINRT_API
+#ifdef UNICODE
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL);
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ {
+ WCHAR filenameW[FILENAME_MAX + 0x200 + 1];
+ MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200);
+ hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL);
+ }
+#endif
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+#endif
+
+ return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode)
+{
+ const char* mode_fopen = NULL;
+ DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+ HANDLE hFile = NULL;
+
+ win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+#ifdef IOWIN32_USING_WINRT_API
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ {
+ WCHAR filenameW[FILENAME_MAX + 0x200 + 1];
+ MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200);
+ hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL);
+ }
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+#endif
+
+ return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode)
+{
+ const char* mode_fopen = NULL;
+ DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+ HANDLE hFile = NULL;
+
+ win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+#ifdef IOWIN32_USING_WINRT_API
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFile2((LPCWSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition,NULL);
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+#endif
+
+ return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode)
+{
+ const char* mode_fopen = NULL;
+ DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+ HANDLE hFile = NULL;
+
+ win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+#ifdef IOWIN32_USING_WINRT_API
+#ifdef UNICODE
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFile2((LPCTSTR)filename, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL);
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ {
+ WCHAR filenameW[FILENAME_MAX + 0x200 + 1];
+ MultiByteToWideChar(CP_ACP,0,(const char*)filename,-1,filenameW,FILENAME_MAX + 0x200);
+ hFile = CreateFile2(filenameW, dwDesiredAccess, dwShareMode, dwCreationDisposition, NULL);
+ }
+#endif
+#else
+ if ((filename!=NULL) && (dwDesiredAccess != 0))
+ hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+#endif
+
+ return win32_build_iowin(hFile);
+}
+
+
+uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size)
+{
+ uLong ret=0;
+ HANDLE hFile = NULL;
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
+ if (hFile != NULL)
+ {
+ if (!ReadFile(hFile, buf, size, &ret, NULL))
+ {
+ DWORD dwErr = GetLastError();
+ if (dwErr == ERROR_HANDLE_EOF)
+ dwErr = 0;
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ }
+ }
+
+ return ret;
+}
+
+
+uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size)
+{
+ uLong ret=0;
+ HANDLE hFile = NULL;
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
+ if (hFile != NULL)
+ {
+ if (!WriteFile(hFile, buf, size, &ret, NULL))
+ {
+ DWORD dwErr = GetLastError();
+ if (dwErr == ERROR_HANDLE_EOF)
+ dwErr = 0;
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ }
+ }
+
+ return ret;
+}
+
+static BOOL MySetFilePointerEx(HANDLE hFile, LARGE_INTEGER pos, LARGE_INTEGER *newPos, DWORD dwMoveMethod)
+{
+#ifdef IOWIN32_USING_WINRT_API
+ return SetFilePointerEx(hFile, pos, newPos, dwMoveMethod);
+#else
+ LONG lHigh = pos.HighPart;
+ DWORD dwNewPos = SetFilePointer(hFile, pos.LowPart, &lHigh, FILE_CURRENT);
+ BOOL fOk = TRUE;
+ if (dwNewPos == 0xFFFFFFFF)
+ if (GetLastError() != NO_ERROR)
+ fOk = FALSE;
+ if ((newPos != NULL) && (fOk))
+ {
+ newPos->LowPart = dwNewPos;
+ newPos->HighPart = lHigh;
+ }
+ return fOk;
+#endif
+}
+
+long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
+{
+ long ret=-1;
+ HANDLE hFile = NULL;
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+ if (hFile != NULL)
+ {
+ LARGE_INTEGER pos;
+ pos.QuadPart = 0;
+
+ if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT))
+ {
+ DWORD dwErr = GetLastError();
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ ret = -1;
+ }
+ else
+ ret=(long)pos.LowPart;
+ }
+ return ret;
+}
+
+ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
+{
+ ZPOS64_T ret= (ZPOS64_T)-1;
+ HANDLE hFile = NULL;
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+ if (hFile)
+ {
+ LARGE_INTEGER pos;
+ pos.QuadPart = 0;
+
+ if (!MySetFilePointerEx(hFile, pos, &pos, FILE_CURRENT))
+ {
+ DWORD dwErr = GetLastError();
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ ret = (ZPOS64_T)-1;
+ }
+ else
+ ret=pos.QuadPart;
+ }
+ return ret;
+}
+
+
+long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin)
+{
+ DWORD dwMoveMethod=0xFFFFFFFF;
+ HANDLE hFile = NULL;
+
+ long ret=-1;
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+ switch (origin)
+ {
+ case ZLIB_FILEFUNC_SEEK_CUR :
+ dwMoveMethod = FILE_CURRENT;
+ break;
+ case ZLIB_FILEFUNC_SEEK_END :
+ dwMoveMethod = FILE_END;
+ break;
+ case ZLIB_FILEFUNC_SEEK_SET :
+ dwMoveMethod = FILE_BEGIN;
+ break;
+ default: return -1;
+ }
+
+ if (hFile != NULL)
+ {
+ LARGE_INTEGER pos;
+ pos.QuadPart = offset;
+ if (!MySetFilePointerEx(hFile, pos, NULL, dwMoveMethod))
+ {
+ DWORD dwErr = GetLastError();
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ ret = -1;
+ }
+ else
+ ret=0;
+ }
+ return ret;
+}
+
+long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin)
+{
+ DWORD dwMoveMethod=0xFFFFFFFF;
+ HANDLE hFile = NULL;
+ long ret=-1;
+
+ if (stream!=NULL)
+ hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+ switch (origin)
+ {
+ case ZLIB_FILEFUNC_SEEK_CUR :
+ dwMoveMethod = FILE_CURRENT;
+ break;
+ case ZLIB_FILEFUNC_SEEK_END :
+ dwMoveMethod = FILE_END;
+ break;
+ case ZLIB_FILEFUNC_SEEK_SET :
+ dwMoveMethod = FILE_BEGIN;
+ break;
+ default: return -1;
+ }
+
+ if (hFile)
+ {
+ LARGE_INTEGER pos;
+ pos.QuadPart = offset;
+ if (!MySetFilePointerEx(hFile, pos, NULL, FILE_CURRENT))
+ {
+ DWORD dwErr = GetLastError();
+ ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+ ret = -1;
+ }
+ else
+ ret=0;
+ }
+ return ret;
+}
+
+int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
+{
+ int ret=-1;
+
+ if (stream!=NULL)
+ {
+ HANDLE hFile;
+ hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+ if (hFile != NULL)
+ {
+ CloseHandle(hFile);
+ ret=0;
+ }
+ free(stream);
+ }
+ return ret;
+}
+
+int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
+{
+ int ret=-1;
+ if (stream!=NULL)
+ {
+ ret = ((WIN32FILE_IOWIN*)stream) -> error;
+ }
+ return ret;
+}
+
+void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
+{
+ pzlib_filefunc_def->zopen_file = win32_open_file_func;
+ pzlib_filefunc_def->zread_file = win32_read_file_func;
+ pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+ pzlib_filefunc_def->ztell_file = win32_tell_file_func;
+ pzlib_filefunc_def->zseek_file = win32_seek_file_func;
+ pzlib_filefunc_def->zclose_file = win32_close_file_func;
+ pzlib_filefunc_def->zerror_file = win32_error_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ pzlib_filefunc_def->zopen64_file = win32_open64_file_func;
+ pzlib_filefunc_def->zread_file = win32_read_file_func;
+ pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+ pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+ pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+ pzlib_filefunc_def->zclose_file = win32_close_file_func;
+ pzlib_filefunc_def->zerror_file = win32_error_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA;
+ pzlib_filefunc_def->zread_file = win32_read_file_func;
+ pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+ pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+ pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+ pzlib_filefunc_def->zclose_file = win32_close_file_func;
+ pzlib_filefunc_def->zerror_file = win32_error_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW;
+ pzlib_filefunc_def->zread_file = win32_read_file_func;
+ pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+ pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+ pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+ pzlib_filefunc_def->zclose_file = win32_close_file_func;
+ pzlib_filefunc_def->zerror_file = win32_error_file_func;
+ pzlib_filefunc_def->opaque = NULL;
+}
--- /dev/null
+/* iowin32.h -- IO base function header for compress/uncompress .zip
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+*/
+
+#include <windows.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def));
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null
+$ if f$search("ioapi.h_orig") .eqs. "" then copy ioapi.h ioapi.h_orig
+$ open/write zdef vmsdefs.h
+$ copy sys$input: zdef
+$ deck
+#define unix
+#define fill_zlib_filefunc64_32_def_from_filefunc32 fillzffunc64from
+#define Write_Zip64EndOfCentralDirectoryLocator Write_Zip64EoDLocator
+#define Write_Zip64EndOfCentralDirectoryRecord Write_Zip64EoDRecord
+#define Write_EndOfCentralDirectoryRecord Write_EoDRecord
+$ eod
+$ close zdef
+$ copy vmsdefs.h,ioapi.h_orig ioapi.h
+$ cc/include=[--]/prefix=all ioapi.c
+$ cc/include=[--]/prefix=all miniunz.c
+$ cc/include=[--]/prefix=all unzip.c
+$ cc/include=[--]/prefix=all minizip.c
+$ cc/include=[--]/prefix=all zip.c
+$ link miniunz,unzip,ioapi,[--]libz.olb/lib
+$ link minizip,zip,ioapi,[--]libz.olb/lib
+$ mcr []minizip test minizip_info.txt
+$ mcr []miniunz -l test.zip
+$ rename minizip_info.txt; minizip_info.txt_old
+$ mcr []miniunz test.zip
+$ delete test.zip;*
+$exit
--- /dev/null
+/*
+ miniunz.c
+ Version 1.1, February 14h, 2010
+ sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications of Unzip for Zip64
+ Copyright (C) 2007-2008 Even Rouault
+
+ Modifications for Zip64 support on both zip and unzip
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
+ #ifndef __USE_FILE_OFFSET64
+ #define __USE_FILE_OFFSET64
+ #endif
+ #ifndef __USE_LARGEFILE64
+ #define __USE_LARGEFILE64
+ #endif
+ #ifndef _LARGEFILE64_SOURCE
+ #define _LARGEFILE64_SOURCE
+ #endif
+ #ifndef _FILE_OFFSET_BIT
+ #define _FILE_OFFSET_BIT 64
+ #endif
+#endif
+
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
+#endif
+
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+#define MAXFILENAME (256)
+
+#ifdef _WIN32
+#define USEWIN32IOAPI
+#include "iowin32.h"
+#endif
+/*
+ mini unzip, demo of unzip package
+
+ usage :
+ Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
+
+ list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+ if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+ filename : the filename of the file where date/time must be modified
+ dosdate : the new date at the MSDos format (4 bytes)
+ tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+ const char *filename;
+ uLong dosdate;
+ tm_unz tmu_date;
+{
+#ifdef _WIN32
+ HANDLE hFile;
+ FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+ hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE,
+ 0,NULL,OPEN_EXISTING,0,NULL);
+ GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+ DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+ LocalFileTimeToFileTime(&ftLocal,&ftm);
+ SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+ CloseHandle(hFile);
+#else
+#ifdef unix || __APPLE__
+ struct utimbuf ut;
+ struct tm newdate;
+ newdate.tm_sec = tmu_date.tm_sec;
+ newdate.tm_min=tmu_date.tm_min;
+ newdate.tm_hour=tmu_date.tm_hour;
+ newdate.tm_mday=tmu_date.tm_mday;
+ newdate.tm_mon=tmu_date.tm_mon;
+ if (tmu_date.tm_year > 1900)
+ newdate.tm_year=tmu_date.tm_year - 1900;
+ else
+ newdate.tm_year=tmu_date.tm_year ;
+ newdate.tm_isdst=-1;
+
+ ut.actime=ut.modtime=mktime(&newdate);
+ utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+ As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+ const char* dirname;
+{
+ int ret=0;
+#ifdef _WIN32
+ ret = _mkdir(dirname);
+#elif unix
+ ret = mkdir (dirname,0775);
+#elif __APPLE__
+ ret = mkdir (dirname,0775);
+#endif
+ return ret;
+}
+
+int makedir (newdir)
+ char *newdir;
+{
+ char *buffer ;
+ char *p;
+ int len = (int)strlen(newdir);
+
+ if (len <= 0)
+ return 0;
+
+ buffer = (char*)malloc(len+1);
+ if (buffer==NULL)
+ {
+ printf("Error allocating memory\n");
+ return UNZ_INTERNALERROR;
+ }
+ strcpy(buffer,newdir);
+
+ if (buffer[len-1] == '/') {
+ buffer[len-1] = '\0';
+ }
+ if (mymkdir(buffer) == 0)
+ {
+ free(buffer);
+ return 1;
+ }
+
+ p = buffer+1;
+ while (1)
+ {
+ char hold;
+
+ while(*p && *p != '\\' && *p != '/')
+ p++;
+ hold = *p;
+ *p = 0;
+ if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+ {
+ printf("couldn't create directory %s\n",buffer);
+ free(buffer);
+ return 0;
+ }
+ if (hold == 0)
+ break;
+ *p++ = hold;
+ }
+ free(buffer);
+ return 1;
+}
+
+void do_banner()
+{
+ printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
+ printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+}
+
+void do_help()
+{
+ printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
+ " -e Extract without pathname (junk paths)\n" \
+ " -x Extract with pathname\n" \
+ " -v list files\n" \
+ " -l list files\n" \
+ " -d directory to extract into\n" \
+ " -o overwrite files without prompting\n" \
+ " -p extract crypted file using password\n\n");
+}
+
+void Display64BitsSize(ZPOS64_T n, int size_char)
+{
+ /* to avoid compatibility problem , we do here the conversion */
+ char number[21];
+ int offset=19;
+ int pos_string = 19;
+ number[20]=0;
+ for (;;) {
+ number[offset]=(char)((n%10)+'0');
+ if (number[offset] != '0')
+ pos_string=offset;
+ n/=10;
+ if (offset==0)
+ break;
+ offset--;
+ }
+ {
+ int size_display_string = 19-pos_string;
+ while (size_char > size_display_string)
+ {
+ size_char--;
+ printf(" ");
+ }
+ }
+
+ printf("%s",&number[pos_string]);
+}
+
+int do_list(uf)
+ unzFile uf;
+{
+ uLong i;
+ unz_global_info64 gi;
+ int err;
+
+ err = unzGetGlobalInfo64(uf,&gi);
+ if (err!=UNZ_OK)
+ printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+ printf(" Length Method Size Ratio Date Time CRC-32 Name\n");
+ printf(" ------ ------ ---- ----- ---- ---- ------ ----\n");
+ for (i=0;i<gi.number_entry;i++)
+ {
+ char filename_inzip[256];
+ unz_file_info64 file_info;
+ uLong ratio=0;
+ const char *string_method;
+ char charCrypt=' ';
+ err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+ break;
+ }
+ if (file_info.uncompressed_size>0)
+ ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size);
+
+ /* display a '*' if the file is crypted */
+ if ((file_info.flag & 1) != 0)
+ charCrypt='*';
+
+ if (file_info.compression_method==0)
+ string_method="Stored";
+ else
+ if (file_info.compression_method==Z_DEFLATED)
+ {
+ uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+ if (iLevel==0)
+ string_method="Defl:N";
+ else if (iLevel==1)
+ string_method="Defl:X";
+ else if ((iLevel==2) || (iLevel==3))
+ string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+ }
+ else
+ if (file_info.compression_method==Z_BZIP2ED)
+ {
+ string_method="BZip2 ";
+ }
+ else
+ string_method="Unkn. ";
+
+ Display64BitsSize(file_info.uncompressed_size,7);
+ printf(" %6s%c",string_method,charCrypt);
+ Display64BitsSize(file_info.compressed_size,7);
+ printf(" %3lu%% %2.2lu-%2.2lu-%2.2lu %2.2lu:%2.2lu %8.8lx %s\n",
+ ratio,
+ (uLong)file_info.tmu_date.tm_mon + 1,
+ (uLong)file_info.tmu_date.tm_mday,
+ (uLong)file_info.tmu_date.tm_year % 100,
+ (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+ (uLong)file_info.crc,filename_inzip);
+ if ((i+1)<gi.number_entry)
+ {
+ err = unzGoToNextFile(uf);
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzGoToNextFile\n",err);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
+ unzFile uf;
+ const int* popt_extract_without_path;
+ int* popt_overwrite;
+ const char* password;
+{
+ char filename_inzip[256];
+ char* filename_withoutpath;
+ char* p;
+ int err=UNZ_OK;
+ FILE *fout=NULL;
+ void* buf;
+ uInt size_buf;
+
+ unz_file_info64 file_info;
+ uLong ratio=0;
+ err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+ return err;
+ }
+
+ size_buf = WRITEBUFFERSIZE;
+ buf = (void*)malloc(size_buf);
+ if (buf==NULL)
+ {
+ printf("Error allocating memory\n");
+ return UNZ_INTERNALERROR;
+ }
+
+ p = filename_withoutpath = filename_inzip;
+ while ((*p) != '\0')
+ {
+ if (((*p)=='/') || ((*p)=='\\'))
+ filename_withoutpath = p+1;
+ p++;
+ }
+
+ if ((*filename_withoutpath)=='\0')
+ {
+ if ((*popt_extract_without_path)==0)
+ {
+ printf("creating directory: %s\n",filename_inzip);
+ mymkdir(filename_inzip);
+ }
+ }
+ else
+ {
+ const char* write_filename;
+ int skip=0;
+
+ if ((*popt_extract_without_path)==0)
+ write_filename = filename_inzip;
+ else
+ write_filename = filename_withoutpath;
+
+ err = unzOpenCurrentFilePassword(uf,password);
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzOpenCurrentFilePassword\n",err);
+ }
+
+ if (((*popt_overwrite)==0) && (err==UNZ_OK))
+ {
+ char rep=0;
+ FILE* ftestexist;
+ ftestexist = FOPEN_FUNC(write_filename,"rb");
+ if (ftestexist!=NULL)
+ {
+ fclose(ftestexist);
+ do
+ {
+ char answer[128];
+ int ret;
+
+ printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+ ret = scanf("%1s",answer);
+ if (ret != 1)
+ {
+ exit(EXIT_FAILURE);
+ }
+ rep = answer[0] ;
+ if ((rep>='a') && (rep<='z'))
+ rep -= 0x20;
+ }
+ while ((rep!='Y') && (rep!='N') && (rep!='A'));
+ }
+
+ if (rep == 'N')
+ skip = 1;
+
+ if (rep == 'A')
+ *popt_overwrite=1;
+ }
+
+ if ((skip==0) && (err==UNZ_OK))
+ {
+ fout=FOPEN_FUNC(write_filename,"wb");
+ /* some zipfile don't contain directory alone before file */
+ if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
+ (filename_withoutpath!=(char*)filename_inzip))
+ {
+ char c=*(filename_withoutpath-1);
+ *(filename_withoutpath-1)='\0';
+ makedir(write_filename);
+ *(filename_withoutpath-1)=c;
+ fout=FOPEN_FUNC(write_filename,"wb");
+ }
+
+ if (fout==NULL)
+ {
+ printf("error opening %s\n",write_filename);
+ }
+ }
+
+ if (fout!=NULL)
+ {
+ printf(" extracting: %s\n",write_filename);
+
+ do
+ {
+ err = unzReadCurrentFile(uf,buf,size_buf);
+ if (err<0)
+ {
+ printf("error %d with zipfile in unzReadCurrentFile\n",err);
+ break;
+ }
+ if (err>0)
+ if (fwrite(buf,err,1,fout)!=1)
+ {
+ printf("error in writing extracted file\n");
+ err=UNZ_ERRNO;
+ break;
+ }
+ }
+ while (err>0);
+ if (fout)
+ fclose(fout);
+
+ if (err==0)
+ change_file_date(write_filename,file_info.dosDate,
+ file_info.tmu_date);
+ }
+
+ if (err==UNZ_OK)
+ {
+ err = unzCloseCurrentFile (uf);
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+ }
+ }
+ else
+ unzCloseCurrentFile(uf); /* don't lose the error */
+ }
+
+ free(buf);
+ return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
+ unzFile uf;
+ int opt_extract_without_path;
+ int opt_overwrite;
+ const char* password;
+{
+ uLong i;
+ unz_global_info64 gi;
+ int err;
+ FILE* fout=NULL;
+
+ err = unzGetGlobalInfo64(uf,&gi);
+ if (err!=UNZ_OK)
+ printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+ for (i=0;i<gi.number_entry;i++)
+ {
+ if (do_extract_currentfile(uf,&opt_extract_without_path,
+ &opt_overwrite,
+ password) != UNZ_OK)
+ break;
+
+ if ((i+1)<gi.number_entry)
+ {
+ err = unzGoToNextFile(uf);
+ if (err!=UNZ_OK)
+ {
+ printf("error %d with zipfile in unzGoToNextFile\n",err);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite,password)
+ unzFile uf;
+ const char* filename;
+ int opt_extract_without_path;
+ int opt_overwrite;
+ const char* password;
+{
+ int err = UNZ_OK;
+ if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+ {
+ printf("file %s not found in the zipfile\n",filename);
+ return 2;
+ }
+
+ if (do_extract_currentfile(uf,&opt_extract_without_path,
+ &opt_overwrite,
+ password) == UNZ_OK)
+ return 0;
+ else
+ return 1;
+}
+
+
+int main(argc,argv)
+ int argc;
+ char *argv[];
+{
+ const char *zipfilename=NULL;
+ const char *filename_to_extract=NULL;
+ const char *password=NULL;
+ char filename_try[MAXFILENAME+16] = "";
+ int i;
+ int ret_value=0;
+ int opt_do_list=0;
+ int opt_do_extract=1;
+ int opt_do_extract_withoutpath=0;
+ int opt_overwrite=0;
+ int opt_extractdir=0;
+ const char *dirname=NULL;
+ unzFile uf=NULL;
+
+ do_banner();
+ if (argc==1)
+ {
+ do_help();
+ return 0;
+ }
+ else
+ {
+ for (i=1;i<argc;i++)
+ {
+ if ((*argv[i])=='-')
+ {
+ const char *p=argv[i]+1;
+
+ while ((*p)!='\0')
+ {
+ char c=*(p++);;
+ if ((c=='l') || (c=='L'))
+ opt_do_list = 1;
+ if ((c=='v') || (c=='V'))
+ opt_do_list = 1;
+ if ((c=='x') || (c=='X'))
+ opt_do_extract = 1;
+ if ((c=='e') || (c=='E'))
+ opt_do_extract = opt_do_extract_withoutpath = 1;
+ if ((c=='o') || (c=='O'))
+ opt_overwrite=1;
+ if ((c=='d') || (c=='D'))
+ {
+ opt_extractdir=1;
+ dirname=argv[i+1];
+ }
+
+ if (((c=='p') || (c=='P')) && (i+1<argc))
+ {
+ password=argv[i+1];
+ i++;
+ }
+ }
+ }
+ else
+ {
+ if (zipfilename == NULL)
+ zipfilename = argv[i];
+ else if ((filename_to_extract==NULL) && (!opt_extractdir))
+ filename_to_extract = argv[i] ;
+ }
+ }
+ }
+
+ if (zipfilename!=NULL)
+ {
+
+# ifdef USEWIN32IOAPI
+ zlib_filefunc64_def ffunc;
+# endif
+
+ strncpy(filename_try, zipfilename,MAXFILENAME-1);
+ /* strncpy doesnt append the trailing NULL, of the string is too long. */
+ filename_try[ MAXFILENAME ] = '\0';
+
+# ifdef USEWIN32IOAPI
+ fill_win32_filefunc64A(&ffunc);
+ uf = unzOpen2_64(zipfilename,&ffunc);
+# else
+ uf = unzOpen64(zipfilename);
+# endif
+ if (uf==NULL)
+ {
+ strcat(filename_try,".zip");
+# ifdef USEWIN32IOAPI
+ uf = unzOpen2_64(filename_try,&ffunc);
+# else
+ uf = unzOpen64(filename_try);
+# endif
+ }
+ }
+
+ if (uf==NULL)
+ {
+ printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+ return 1;
+ }
+ printf("%s opened\n",filename_try);
+
+ if (opt_do_list==1)
+ ret_value = do_list(uf);
+ else if (opt_do_extract==1)
+ {
+#ifdef _WIN32
+ if (opt_extractdir && _chdir(dirname))
+#else
+ if (opt_extractdir && chdir(dirname))
+#endif
+ {
+ printf("Error changing into %s, aborting\n", dirname);
+ exit(-1);
+ }
+
+ if (filename_to_extract == NULL)
+ ret_value = do_extract(uf, opt_do_extract_withoutpath, opt_overwrite, password);
+ else
+ ret_value = do_extract_onefile(uf, filename_to_extract, opt_do_extract_withoutpath, opt_overwrite, password);
+ }
+
+ unzClose(uf);
+
+ return ret_value;
+}
--- /dev/null
+.\" Hey, EMACS: -*- nroff -*-
+.TH miniunzip 1 "Nov 7, 2001"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+miniunzip - uncompress and examine ZIP archives
+.SH SYNOPSIS
+.B miniunzip
+.RI [ -exvlo ]
+zipfile [ files_to_extract ] [-d tempdir]
+.SH DESCRIPTION
+.B minizip
+is a simple tool which allows the extraction of compressed file
+archives in the ZIP format used by the MS-DOS utility PKZIP. It was
+written as a demonstration of the
+.IR zlib (3)
+library and therefore lack many of the features of the
+.IR unzip (1)
+program.
+.SH OPTIONS
+A number of options are supported. With the exception of
+.BI \-d\ tempdir
+these must be supplied before any
+other arguments and are:
+.TP
+.BI \-l\ ,\ \-\-v
+List the files in the archive without extracting them.
+.TP
+.B \-o
+Overwrite files without prompting for confirmation.
+.TP
+.B \-x
+Extract files (default).
+.PP
+The
+.I zipfile
+argument is the name of the archive to process. The next argument can be used
+to specify a single file to extract from the archive.
+
+Lastly, the following option can be specified at the end of the command-line:
+.TP
+.BI \-d\ tempdir
+Extract the archive in the directory
+.I tempdir
+rather than the current directory.
+.SH SEE ALSO
+.BR minizip (1),
+.BR zlib (3),
+.BR unzip (1).
+.SH AUTHOR
+This program was written by Gilles Vollant. This manual page was
+written by Mark Brown <broonie@sirena.org.uk>. The -d tempdir option
+was added by Dirk Eddelbuettel <edd@debian.org>.
--- /dev/null
+.\" Hey, EMACS: -*- nroff -*-
+.TH minizip 1 "May 2, 2001"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+minizip - create ZIP archives
+.SH SYNOPSIS
+.B minizip
+.RI [ -o ]
+zipfile [ " files" ... ]
+.SH DESCRIPTION
+.B minizip
+is a simple tool which allows the creation of compressed file archives
+in the ZIP format used by the MS-DOS utility PKZIP. It was written as
+a demonstration of the
+.IR zlib (3)
+library and therefore lack many of the features of the
+.IR zip (1)
+program.
+.SH OPTIONS
+The first argument supplied is the name of the ZIP archive to create or
+.RI -o
+in which case it is ignored and the second argument treated as the
+name of the ZIP file. If the ZIP file already exists it will be
+overwritten.
+.PP
+Subsequent arguments specify a list of files to place in the ZIP
+archive. If none are specified then an empty archive will be created.
+.SH SEE ALSO
+.BR miniunzip (1),
+.BR zlib (3),
+.BR zip (1).
+.SH AUTHOR
+This program was written by Gilles Vollant. This manual page was
+written by Mark Brown <broonie@sirena.org.uk>.
+
--- /dev/null
+/*
+ minizip.c
+ Version 1.1, February 14h, 2010
+ sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications of Unzip for Zip64
+ Copyright (C) 2007-2008 Even Rouault
+
+ Modifications for Zip64 support on both zip and unzip
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
+ #ifndef __USE_FILE_OFFSET64
+ #define __USE_FILE_OFFSET64
+ #endif
+ #ifndef __USE_LARGEFILE64
+ #define __USE_LARGEFILE64
+ #endif
+ #ifndef _LARGEFILE64_SOURCE
+ #define _LARGEFILE64_SOURCE
+ #endif
+ #ifndef _FILE_OFFSET_BIT
+ #define _FILE_OFFSET_BIT 64
+ #endif
+#endif
+
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#endif
+
+#include "zip.h"
+
+#ifdef _WIN32
+ #define USEWIN32IOAPI
+ #include "iowin32.h"
+#endif
+
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef _WIN32
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ int ret = 0;
+ {
+ FILETIME ftLocal;
+ HANDLE hFind;
+ WIN32_FIND_DATAA ff32;
+
+ hFind = FindFirstFileA(f,&ff32);
+ if (hFind != INVALID_HANDLE_VALUE)
+ {
+ FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+ FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+ FindClose(hFind);
+ ret = 1;
+ }
+ }
+ return ret;
+}
+#else
+#ifdef unix || __APPLE__
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ int ret=0;
+ struct stat s; /* results of stat() */
+ struct tm* filedate;
+ time_t tm_t=0;
+
+ if (strcmp(f,"-")!=0)
+ {
+ char name[MAXFILENAME+1];
+ int len = strlen(f);
+ if (len > MAXFILENAME)
+ len = MAXFILENAME;
+
+ strncpy(name, f,MAXFILENAME-1);
+ /* strncpy doesnt append the trailing NULL, of the string is too long. */
+ name[ MAXFILENAME ] = '\0';
+
+ if (name[len - 1] == '/')
+ name[len - 1] = '\0';
+ /* not all systems allow stat'ing a file with / appended */
+ if (stat(name,&s)==0)
+ {
+ tm_t = s.st_mtime;
+ ret = 1;
+ }
+ }
+ filedate = localtime(&tm_t);
+
+ tmzip->tm_sec = filedate->tm_sec;
+ tmzip->tm_min = filedate->tm_min;
+ tmzip->tm_hour = filedate->tm_hour;
+ tmzip->tm_mday = filedate->tm_mday;
+ tmzip->tm_mon = filedate->tm_mon ;
+ tmzip->tm_year = filedate->tm_year;
+
+ return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+ const char* filename;
+{
+ FILE* ftestexist;
+ int ret = 1;
+ ftestexist = FOPEN_FUNC(filename,"rb");
+ if (ftestexist==NULL)
+ ret = 0;
+ else
+ fclose(ftestexist);
+ return ret;
+}
+
+void do_banner()
+{
+ printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
+ printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
+}
+
+void do_help()
+{
+ printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
+ " -o Overwrite existing file.zip\n" \
+ " -a Append to existing file.zip\n" \
+ " -0 Store only\n" \
+ " -1 Compress faster\n" \
+ " -9 Compress better\n\n" \
+ " -j exclude path. store only the file name.\n\n");
+}
+
+/* calculate the CRC32 of a file,
+ because to encrypt a file, we need known the CRC32 of the file before */
+int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
+{
+ unsigned long calculate_crc=0;
+ int err=ZIP_OK;
+ FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
+
+ unsigned long size_read = 0;
+ unsigned long total_read = 0;
+ if (fin==NULL)
+ {
+ err = ZIP_ERRNO;
+ }
+
+ if (err == ZIP_OK)
+ do
+ {
+ err = ZIP_OK;
+ size_read = (int)fread(buf,1,size_buf,fin);
+ if (size_read < size_buf)
+ if (feof(fin)==0)
+ {
+ printf("error in reading %s\n",filenameinzip);
+ err = ZIP_ERRNO;
+ }
+
+ if (size_read>0)
+ calculate_crc = crc32(calculate_crc,buf,size_read);
+ total_read += size_read;
+
+ } while ((err == ZIP_OK) && (size_read>0));
+
+ if (fin)
+ fclose(fin);
+
+ *result_crc=calculate_crc;
+ printf("file %s crc %lx\n", filenameinzip, calculate_crc);
+ return err;
+}
+
+int isLargeFile(const char* filename)
+{
+ int largeFile = 0;
+ ZPOS64_T pos = 0;
+ FILE* pFile = FOPEN_FUNC(filename, "rb");
+
+ if(pFile != NULL)
+ {
+ int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
+ pos = FTELLO_FUNC(pFile);
+
+ printf("File : %s is %lld bytes\n", filename, pos);
+
+ if(pos >= 0xffffffff)
+ largeFile = 1;
+
+ fclose(pFile);
+ }
+
+ return largeFile;
+}
+
+int main(argc,argv)
+ int argc;
+ char *argv[];
+{
+ int i;
+ int opt_overwrite=0;
+ int opt_compress_level=Z_DEFAULT_COMPRESSION;
+ int opt_exclude_path=0;
+ int zipfilenamearg = 0;
+ char filename_try[MAXFILENAME+16];
+ int zipok;
+ int err=0;
+ int size_buf=0;
+ void* buf=NULL;
+ const char* password=NULL;
+
+
+ do_banner();
+ if (argc==1)
+ {
+ do_help();
+ return 0;
+ }
+ else
+ {
+ for (i=1;i<argc;i++)
+ {
+ if ((*argv[i])=='-')
+ {
+ const char *p=argv[i]+1;
+
+ while ((*p)!='\0')
+ {
+ char c=*(p++);;
+ if ((c=='o') || (c=='O'))
+ opt_overwrite = 1;
+ if ((c=='a') || (c=='A'))
+ opt_overwrite = 2;
+ if ((c>='0') && (c<='9'))
+ opt_compress_level = c-'0';
+ if ((c=='j') || (c=='J'))
+ opt_exclude_path = 1;
+
+ if (((c=='p') || (c=='P')) && (i+1<argc))
+ {
+ password=argv[i+1];
+ i++;
+ }
+ }
+ }
+ else
+ {
+ if (zipfilenamearg == 0)
+ {
+ zipfilenamearg = i ;
+ }
+ }
+ }
+ }
+
+ size_buf = WRITEBUFFERSIZE;
+ buf = (void*)malloc(size_buf);
+ if (buf==NULL)
+ {
+ printf("Error allocating memory\n");
+ return ZIP_INTERNALERROR;
+ }
+
+ if (zipfilenamearg==0)
+ {
+ zipok=0;
+ }
+ else
+ {
+ int i,len;
+ int dot_found=0;
+
+ zipok = 1 ;
+ strncpy(filename_try, argv[zipfilenamearg],MAXFILENAME-1);
+ /* strncpy doesnt append the trailing NULL, of the string is too long. */
+ filename_try[ MAXFILENAME ] = '\0';
+
+ len=(int)strlen(filename_try);
+ for (i=0;i<len;i++)
+ if (filename_try[i]=='.')
+ dot_found=1;
+
+ if (dot_found==0)
+ strcat(filename_try,".zip");
+
+ if (opt_overwrite==2)
+ {
+ /* if the file don't exist, we not append file */
+ if (check_exist_file(filename_try)==0)
+ opt_overwrite=1;
+ }
+ else
+ if (opt_overwrite==0)
+ if (check_exist_file(filename_try)!=0)
+ {
+ char rep=0;
+ do
+ {
+ char answer[128];
+ int ret;
+ printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+ ret = scanf("%1s",answer);
+ if (ret != 1)
+ {
+ exit(EXIT_FAILURE);
+ }
+ rep = answer[0] ;
+ if ((rep>='a') && (rep<='z'))
+ rep -= 0x20;
+ }
+ while ((rep!='Y') && (rep!='N') && (rep!='A'));
+ if (rep=='N')
+ zipok = 0;
+ if (rep=='A')
+ opt_overwrite = 2;
+ }
+ }
+
+ if (zipok==1)
+ {
+ zipFile zf;
+ int errclose;
+# ifdef USEWIN32IOAPI
+ zlib_filefunc64_def ffunc;
+ fill_win32_filefunc64A(&ffunc);
+ zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+# else
+ zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0);
+# endif
+
+ if (zf == NULL)
+ {
+ printf("error opening %s\n",filename_try);
+ err= ZIP_ERRNO;
+ }
+ else
+ printf("creating %s\n",filename_try);
+
+ for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+ {
+ if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+ ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+ (argv[i][1]=='a') || (argv[i][1]=='A') ||
+ (argv[i][1]=='p') || (argv[i][1]=='P') ||
+ ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+ (strlen(argv[i]) == 2)))
+ {
+ FILE * fin;
+ int size_read;
+ const char* filenameinzip = argv[i];
+ const char *savefilenameinzip;
+ zip_fileinfo zi;
+ unsigned long crcFile=0;
+ int zip64 = 0;
+
+ zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
+ zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
+ zi.dosDate = 0;
+ zi.internal_fa = 0;
+ zi.external_fa = 0;
+ filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+/*
+ err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+ NULL,0,NULL,0,NULL / * comment * /,
+ (opt_compress_level != 0) ? Z_DEFLATED : 0,
+ opt_compress_level);
+*/
+ if ((password != NULL) && (err==ZIP_OK))
+ err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
+
+ zip64 = isLargeFile(filenameinzip);
+
+ /* The path name saved, should not include a leading slash. */
+ /*if it did, windows/xp and dynazip couldn't read the zip file. */
+ savefilenameinzip = filenameinzip;
+ while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' )
+ {
+ savefilenameinzip++;
+ }
+
+ /*should the zip file contain any path at all?*/
+ if( opt_exclude_path )
+ {
+ const char *tmpptr;
+ const char *lastslash = 0;
+ for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++)
+ {
+ if( *tmpptr == '\\' || *tmpptr == '/')
+ {
+ lastslash = tmpptr;
+ }
+ }
+ if( lastslash != NULL )
+ {
+ savefilenameinzip = lastslash+1; // base filename follows last slash.
+ }
+ }
+
+ /**/
+ err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi,
+ NULL,0,NULL,0,NULL /* comment*/,
+ (opt_compress_level != 0) ? Z_DEFLATED : 0,
+ opt_compress_level,0,
+ /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ password,crcFile, zip64);
+
+ if (err != ZIP_OK)
+ printf("error in opening %s in zipfile\n",filenameinzip);
+ else
+ {
+ fin = FOPEN_FUNC(filenameinzip,"rb");
+ if (fin==NULL)
+ {
+ err=ZIP_ERRNO;
+ printf("error in opening %s for reading\n",filenameinzip);
+ }
+ }
+
+ if (err == ZIP_OK)
+ do
+ {
+ err = ZIP_OK;
+ size_read = (int)fread(buf,1,size_buf,fin);
+ if (size_read < size_buf)
+ if (feof(fin)==0)
+ {
+ printf("error in reading %s\n",filenameinzip);
+ err = ZIP_ERRNO;
+ }
+
+ if (size_read>0)
+ {
+ err = zipWriteInFileInZip (zf,buf,size_read);
+ if (err<0)
+ {
+ printf("error in writing %s in the zipfile\n",
+ filenameinzip);
+ }
+
+ }
+ } while ((err == ZIP_OK) && (size_read>0));
+
+ if (fin)
+ fclose(fin);
+
+ if (err<0)
+ err=ZIP_ERRNO;
+ else
+ {
+ err = zipCloseFileInZip(zf);
+ if (err!=ZIP_OK)
+ printf("error in closing %s in the zipfile\n",
+ filenameinzip);
+ }
+ }
+ }
+ errclose = zipClose(zf,NULL);
+ if (errclose != ZIP_OK)
+ printf("error in closing %s\n",filename_try);
+ }
+ else
+ {
+ do_help();
+ }
+
+ free(buf);
+ return 0;
+}
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@/minizip
+
+Name: minizip
+Description: Minizip zip file manipulation library
+Requires:
+Version: @PACKAGE_VERSION@
+Libs: -L${libdir} -lminizip
+Libs.private: -lz
+Cflags: -I${includedir}
--- /dev/null
+/*
+ Additional tools for Minizip
+ Code: Xavier Roche '2004
+ License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr) ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+ *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+ WRITE_8((unsigned char*)(buff), n); \
+ WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+ WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+ WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+ int err = Z_OK;
+ FILE* fpZip = fopen(file, "rb");
+ FILE* fpOut = fopen(fileOut, "wb");
+ FILE* fpOutCD = fopen(fileOutTmp, "wb");
+ if (fpZip != NULL && fpOut != NULL) {
+ int entries = 0;
+ uLong totalBytes = 0;
+ char header[30];
+ char filename[1024];
+ char extra[1024];
+ int offset = 0;
+ int offsetCD = 0;
+ while ( fread(header, 1, 30, fpZip) == 30 ) {
+ int currentOffset = offset;
+
+ /* File entry */
+ if (READ_32(header) == 0x04034b50) {
+ unsigned int version = READ_16(header + 4);
+ unsigned int gpflag = READ_16(header + 6);
+ unsigned int method = READ_16(header + 8);
+ unsigned int filetime = READ_16(header + 10);
+ unsigned int filedate = READ_16(header + 12);
+ unsigned int crc = READ_32(header + 14); /* crc */
+ unsigned int cpsize = READ_32(header + 18); /* compressed size */
+ unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+ unsigned int fnsize = READ_16(header + 26); /* file name length */
+ unsigned int extsize = READ_16(header + 28); /* extra field length */
+ filename[0] = extra[0] = '\0';
+
+ /* Header */
+ if (fwrite(header, 1, 30, fpOut) == 30) {
+ offset += 30;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+
+ /* Filename */
+ if (fnsize > 0) {
+ if (fnsize < sizeof(filename)) {
+ if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+ if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+ offset += fnsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ break;
+ }
+
+ /* Extra field */
+ if (extsize > 0) {
+ if (extsize < sizeof(extra)) {
+ if (fread(extra, 1, extsize, fpZip) == extsize) {
+ if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+ offset += extsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Data */
+ {
+ int dataSize = cpsize;
+ if (dataSize == 0) {
+ dataSize = uncpsize;
+ }
+ if (dataSize > 0) {
+ char* data = malloc(dataSize);
+ if (data != NULL) {
+ if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+ if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+ offset += dataSize;
+ totalBytes += dataSize;
+ } else {
+ err = Z_ERRNO;
+ }
+ } else {
+ err = Z_ERRNO;
+ }
+ free(data);
+ if (err != Z_OK) {
+ break;
+ }
+ } else {
+ err = Z_MEM_ERROR;
+ break;
+ }
+ }
+ }
+
+ /* Central directory entry */
+ {
+ char header[46];
+ char* comment = "";
+ int comsize = (int) strlen(comment);
+ WRITE_32(header, 0x02014b50);
+ WRITE_16(header + 4, version);
+ WRITE_16(header + 6, version);
+ WRITE_16(header + 8, gpflag);
+ WRITE_16(header + 10, method);
+ WRITE_16(header + 12, filetime);
+ WRITE_16(header + 14, filedate);
+ WRITE_32(header + 16, crc);
+ WRITE_32(header + 20, cpsize);
+ WRITE_32(header + 24, uncpsize);
+ WRITE_16(header + 28, fnsize);
+ WRITE_16(header + 30, extsize);
+ WRITE_16(header + 32, comsize);
+ WRITE_16(header + 34, 0); /* disk # */
+ WRITE_16(header + 36, 0); /* int attrb */
+ WRITE_32(header + 38, 0); /* ext attrb */
+ WRITE_32(header + 42, currentOffset);
+ /* Header */
+ if (fwrite(header, 1, 46, fpOutCD) == 46) {
+ offsetCD += 46;
+
+ /* Filename */
+ if (fnsize > 0) {
+ if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+ offsetCD += fnsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ break;
+ }
+
+ /* Extra field */
+ if (extsize > 0) {
+ if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+ offsetCD += extsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Comment field */
+ if (comsize > 0) {
+ if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+ offsetCD += comsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Success */
+ entries++;
+
+ } else {
+ break;
+ }
+ }
+
+ /* Final central directory */
+ {
+ int entriesZip = entries;
+ char header[22];
+ char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+ int comsize = (int) strlen(comment);
+ if (entriesZip > 0xffff) {
+ entriesZip = 0xffff;
+ }
+ WRITE_32(header, 0x06054b50);
+ WRITE_16(header + 4, 0); /* disk # */
+ WRITE_16(header + 6, 0); /* disk # */
+ WRITE_16(header + 8, entriesZip); /* hack */
+ WRITE_16(header + 10, entriesZip); /* hack */
+ WRITE_32(header + 12, offsetCD); /* size of CD */
+ WRITE_32(header + 16, offset); /* offset to CD */
+ WRITE_16(header + 20, comsize); /* comment */
+
+ /* Header */
+ if (fwrite(header, 1, 22, fpOutCD) == 22) {
+
+ /* Comment field */
+ if (comsize > 0) {
+ if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+ err = Z_ERRNO;
+ }
+ }
+
+ } else {
+ err = Z_ERRNO;
+ }
+ }
+
+ /* Final merge (file + central directory) */
+ fclose(fpOutCD);
+ if (err == Z_OK) {
+ fpOutCD = fopen(fileOutTmp, "rb");
+ if (fpOutCD != NULL) {
+ int nRead;
+ char buffer[8192];
+ while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+ if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+ fclose(fpOutCD);
+ }
+ }
+
+ /* Close */
+ fclose(fpZip);
+ fclose(fpOut);
+
+ /* Wipe temporary file */
+ (void)remove(fileOutTmp);
+
+ /* Number of recovered entries */
+ if (err == Z_OK) {
+ if (nRecovered != NULL) {
+ *nRecovered = entries;
+ }
+ if (bytesRecovered != NULL) {
+ *bytesRecovered = totalBytes;
+ }
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ }
+ return err;
+}
--- /dev/null
+/*
+ Additional tools for Minizip
+ Code: Xavier Roche '2004
+ License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory)
+ file: file to recover
+ fileOut: output file after recovery
+ fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file,
+ const char* fileOut,
+ const char* fileOutTmp,
+ uLong* nRecovered,
+ uLong* bytesRecovered);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
--- /dev/null
+/* unzip.c -- IO for uncompress .zip files using zlib
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications of Unzip for Zip64
+ Copyright (C) 2007-2008 Even Rouault
+
+ Modifications for Zip64 support on both zip and unzip
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+
+ ------------------------------------------------------------------------------------
+ Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of
+ compatibility with older software. The following is from the original crypt.c.
+ Code woven in by Terry Thorsen 1/2003.
+
+ Copyright (c) 1990-2000 Info-ZIP. All rights reserved.
+
+ See the accompanying file LICENSE, version 2000-Apr-09 or later
+ (the contents of which are also included in zip.h) for terms of use.
+ If, for some reason, all these files are missing, the Info-ZIP license
+ also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
+
+ crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h]
+
+ The encryption/decryption parts of this source code (as opposed to the
+ non-echoing password parts) were originally written in Europe. The
+ whole source package can be freely distributed, including from the USA.
+ (Prior to January 2000, re-export from the US was a violation of US law.)
+
+ This encryption code is a direct transcription of the algorithm from
+ Roger Schlafly, described by Phil Katz in the file appnote.txt. This
+ file (appnote.txt) is distributed with the PKZIP program (even in the
+ version without encryption capabilities).
+
+ ------------------------------------------------------------------------------------
+
+ Changes in unzip.c
+
+ 2007-2008 - Even Rouault - Addition of cpl_unzGetCurrentFileZStreamPos
+ 2007-2008 - Even Rouault - Decoration of symbol names unz* -> cpl_unz*
+ 2007-2008 - Even Rouault - Remove old C style function prototypes
+ 2007-2008 - Even Rouault - Add unzip support for ZIP64
+
+ Copyright (C) 2007-2008 Even Rouault
+
+
+ Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again).
+ Oct-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G
+ should only read the compressed/uncompressed size from the Zip64 format if
+ the size from normal header was 0xFFFFFFFF
+ Oct-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant
+ Oct-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required)
+ Patch created by Daniel Borca
+
+ Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
+
+ Copyright (C) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson
+
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifndef NOUNCRYPT
+ #define NOUNCRYPT
+#endif
+
+#include "zlib.h"
+#include "unzip.h"
+
+#ifdef STDC
+# include <stddef.h>
+# include <string.h>
+# include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+ extern int errno;
+#else
+# include <errno.h>
+#endif
+
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+
+#ifndef CASESENSITIVITYDEFAULT_NO
+# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES)
+# define CASESENSITIVITYDEFAULT_NO
+# endif
+#endif
+
+
+#ifndef UNZ_BUFSIZE
+#define UNZ_BUFSIZE (16384)
+#endif
+
+#ifndef UNZ_MAXFILENAMEINZIP
+#define UNZ_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+
+
+const char unz_copyright[] =
+ " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
+
+/* unz_file_info_interntal contain internal info about a file in zipfile*/
+typedef struct unz_file_info64_internal_s
+{
+ ZPOS64_T offset_curfile;/* relative offset of local header 8 bytes */
+} unz_file_info64_internal;
+
+
+/* file_in_zip_read_info_s contain internal information about a file in zipfile,
+ when reading and decompress it */
+typedef struct
+{
+ char *read_buffer; /* internal buffer for compressed data */
+ z_stream stream; /* zLib stream structure for inflate */
+
+#ifdef HAVE_BZIP2
+ bz_stream bstream; /* bzLib stream structure for bziped */
+#endif
+
+ ZPOS64_T pos_in_zipfile; /* position in byte on the zipfile, for fseek*/
+ uLong stream_initialised; /* flag set if stream structure is initialised*/
+
+ ZPOS64_T offset_local_extrafield;/* offset of the local extra field */
+ uInt size_local_extrafield;/* size of the local extra field */
+ ZPOS64_T pos_local_extrafield; /* position in the local extra field in read*/
+ ZPOS64_T total_out_64;
+
+ uLong crc32; /* crc32 of all data uncompressed */
+ uLong crc32_wait; /* crc32 we must obtain after decompress all */
+ ZPOS64_T rest_read_compressed; /* number of byte to be decompressed */
+ ZPOS64_T rest_read_uncompressed;/*number of byte to be obtained after decomp*/
+ zlib_filefunc64_32_def z_filefunc;
+ voidpf filestream; /* io structore of the zipfile */
+ uLong compression_method; /* compression method (0==store) */
+ ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+ int raw;
+} file_in_zip64_read_info_s;
+
+
+/* unz64_s contain internal information about the zipfile
+*/
+typedef struct
+{
+ zlib_filefunc64_32_def z_filefunc;
+ int is64bitOpenFunction;
+ voidpf filestream; /* io structore of the zipfile */
+ unz_global_info64 gi; /* public global information */
+ ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+ ZPOS64_T num_file; /* number of the current file in the zipfile*/
+ ZPOS64_T pos_in_central_dir; /* pos of the current file in the central dir*/
+ ZPOS64_T current_file_ok; /* flag about the usability of the current file*/
+ ZPOS64_T central_pos; /* position of the beginning of the central dir*/
+
+ ZPOS64_T size_central_dir; /* size of the central directory */
+ ZPOS64_T offset_central_dir; /* offset of start of central directory with
+ respect to the starting disk number */
+
+ unz_file_info64 cur_file_info; /* public info about the current file in zip*/
+ unz_file_info64_internal cur_file_info_internal; /* private info about it*/
+ file_in_zip64_read_info_s* pfile_in_zip_read; /* structure about the current
+ file if we are decompressing it */
+ int encrypted;
+
+ int isZip64;
+
+# ifndef NOUNCRYPT
+ unsigned long keys[3]; /* keys defining the pseudo-random sequence */
+ const z_crc_t* pcrc_32_tab;
+# endif
+} unz64_s;
+
+
+#ifndef NOUNCRYPT
+#include "crypt.h"
+#endif
+
+/* ===========================================================================
+ Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+ for end of file.
+ IN assertion: the stream s has been sucessfully opened for reading.
+*/
+
+
+local int unz64local_getByte OF((
+ const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ int *pi));
+
+local int unz64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi)
+{
+ unsigned char c;
+ int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1);
+ if (err==1)
+ {
+ *pi = (int)c;
+ return UNZ_OK;
+ }
+ else
+ {
+ if (ZERROR64(*pzlib_filefunc_def,filestream))
+ return UNZ_ERRNO;
+ else
+ return UNZ_EOF;
+ }
+}
+
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets
+*/
+local int unz64local_getShort OF((
+ const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int unz64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX)
+{
+ uLong x ;
+ int i = 0;
+ int err;
+
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int unz64local_getLong OF((
+ const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int unz64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX)
+{
+ uLong x ;
+ int i = 0;
+ int err;
+
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((uLong)i)<<16;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<24;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int unz64local_getLong64 OF((
+ const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ ZPOS64_T *pX));
+
+
+local int unz64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream,
+ ZPOS64_T *pX)
+{
+ ZPOS64_T x ;
+ int i = 0;
+ int err;
+
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (ZPOS64_T)i;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<8;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<16;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<24;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<32;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<40;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<48;
+
+ if (err==UNZ_OK)
+ err = unz64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x |= ((ZPOS64_T)i)<<56;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+/* My own strcmpi / strcasecmp */
+local int strcmpcasenosensitive_internal (const char* fileName1, const char* fileName2)
+{
+ for (;;)
+ {
+ char c1=*(fileName1++);
+ char c2=*(fileName2++);
+ if ((c1>='a') && (c1<='z'))
+ c1 -= 0x20;
+ if ((c2>='a') && (c2<='z'))
+ c2 -= 0x20;
+ if (c1=='\0')
+ return ((c2=='\0') ? 0 : -1);
+ if (c2=='\0')
+ return 1;
+ if (c1<c2)
+ return -1;
+ if (c1>c2)
+ return 1;
+ }
+}
+
+
+#ifdef CASESENSITIVITYDEFAULT_NO
+#define CASESENSITIVITYDEFAULTVALUE 2
+#else
+#define CASESENSITIVITYDEFAULTVALUE 1
+#endif
+
+#ifndef STRCMPCASENOSENTIVEFUNCTION
+#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal
+#endif
+
+/*
+ Compare two filename (fileName1,fileName2).
+ If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+ If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+ or strcasecmp)
+ If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+ (like 1 on Unix, 2 on Windows)
+
+*/
+extern int ZEXPORT unzStringFileNameCompare (const char* fileName1,
+ const char* fileName2,
+ int iCaseSensitivity)
+
+{
+ if (iCaseSensitivity==0)
+ iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE;
+
+ if (iCaseSensitivity==1)
+ return strcmp(fileName1,fileName2);
+
+ return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2);
+}
+
+#ifndef BUFREADCOMMENT
+#define BUFREADCOMMENT (0x400)
+#endif
+
+/*
+ Locate the Central directory of a zipfile (at the end, just before
+ the global comment)
+*/
+local ZPOS64_T unz64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
+local ZPOS64_T unz64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
+{
+ unsigned char* buf;
+ ZPOS64_T uSizeFile;
+ ZPOS64_T uBackRead;
+ ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
+ ZPOS64_T uPosFound=0;
+
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+
+ uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize;
+ ZPOS64_T uReadPos ;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos);
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
+ ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+ TRYFREE(buf);
+ return uPosFound;
+}
+
+
+/*
+ Locate the Central directory 64 of a zipfile (at the end, just before
+ the global comment)
+*/
+local ZPOS64_T unz64local_SearchCentralDir64 OF((
+ const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream));
+
+local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def,
+ voidpf filestream)
+{
+ unsigned char* buf;
+ ZPOS64_T uSizeFile;
+ ZPOS64_T uBackRead;
+ ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
+ ZPOS64_T uPosFound=0;
+ uLong uL;
+ ZPOS64_T relativeOffset;
+
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+
+ uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize;
+ ZPOS64_T uReadPos;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos);
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
+ ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+ TRYFREE(buf);
+ if (uPosFound == 0)
+ return 0;
+
+ /* Zip64 end of central directory locator */
+ if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return 0;
+
+ /* the signature, already checked */
+ if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
+ return 0;
+
+ /* number of the disk with the start of the zip64 end of central directory */
+ if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
+ return 0;
+ if (uL != 0)
+ return 0;
+
+ /* relative offset of the zip64 end of central directory record */
+ if (unz64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=UNZ_OK)
+ return 0;
+
+ /* total number of disks */
+ if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
+ return 0;
+ if (uL != 1)
+ return 0;
+
+ /* Goto end of central directory record */
+ if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return 0;
+
+ /* the signature */
+ if (unz64local_getLong(pzlib_filefunc_def,filestream,&uL)!=UNZ_OK)
+ return 0;
+
+ if (uL != 0x06064b50)
+ return 0;
+
+ return relativeOffset;
+}
+
+/*
+ Open a Zip file. path contain the full pathname (by example,
+ on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer
+ "zlib/zlib114.zip".
+ If the zipfile cannot be opened (file doesn't exist or in not valid), the
+ return value is NULL.
+ Else, the return value is a unzFile Handle, usable with other function
+ of this unzip package.
+*/
+local unzFile unzOpenInternal (const void *path,
+ zlib_filefunc64_32_def* pzlib_filefunc64_32_def,
+ int is64bitOpenFunction)
+{
+ unz64_s us;
+ unz64_s *s;
+ ZPOS64_T central_pos;
+ uLong uL;
+
+ uLong number_disk; /* number of the current dist, used for
+ spaning ZIP, unsupported, always 0*/
+ uLong number_disk_with_CD; /* number the the disk with central dir, used
+ for spaning ZIP, unsupported, always 0*/
+ ZPOS64_T number_entry_CD; /* total number of entries in
+ the central dir
+ (same than number_entry on nospan) */
+
+ int err=UNZ_OK;
+
+ if (unz_copyright[0]!=' ')
+ return NULL;
+
+ us.z_filefunc.zseek32_file = NULL;
+ us.z_filefunc.ztell32_file = NULL;
+ if (pzlib_filefunc64_32_def==NULL)
+ fill_fopen64_filefunc(&us.z_filefunc.zfile_func64);
+ else
+ us.z_filefunc = *pzlib_filefunc64_32_def;
+ us.is64bitOpenFunction = is64bitOpenFunction;
+
+
+
+ us.filestream = ZOPEN64(us.z_filefunc,
+ path,
+ ZLIB_FILEFUNC_MODE_READ |
+ ZLIB_FILEFUNC_MODE_EXISTING);
+ if (us.filestream==NULL)
+ return NULL;
+
+ central_pos = unz64local_SearchCentralDir64(&us.z_filefunc,us.filestream);
+ if (central_pos)
+ {
+ uLong uS;
+ ZPOS64_T uL64;
+
+ us.isZip64 = 1;
+
+ if (ZSEEK64(us.z_filefunc, us.filestream,
+ central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+ /* the signature, already checked */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* size of zip64 end of central directory record */
+ if (unz64local_getLong64(&us.z_filefunc, us.filestream,&uL64)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* version made by */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* version needed to extract */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&uS)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of this disk */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* total number of entries in the central directory on this disk */
+ if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* total number of entries in the central directory */
+ if (unz64local_getLong64(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if ((number_entry_CD!=us.gi.number_entry) ||
+ (number_disk_with_CD!=0) ||
+ (number_disk!=0))
+ err=UNZ_BADZIPFILE;
+
+ /* size of the central directory */
+ if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* offset of start of central directory with respect to the
+ starting disk number */
+ if (unz64local_getLong64(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ us.gi.size_comment = 0;
+ }
+ else
+ {
+ central_pos = unz64local_SearchCentralDir(&us.z_filefunc,us.filestream);
+ if (central_pos==0)
+ err=UNZ_ERRNO;
+
+ us.isZip64 = 0;
+
+ if (ZSEEK64(us.z_filefunc, us.filestream,
+ central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+ /* the signature, already checked */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of this disk */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* total number of entries in the central dir on this disk */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+ us.gi.number_entry = uL;
+
+ /* total number of entries in the central dir */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+ number_entry_CD = uL;
+
+ if ((number_entry_CD!=us.gi.number_entry) ||
+ (number_disk_with_CD!=0) ||
+ (number_disk!=0))
+ err=UNZ_BADZIPFILE;
+
+ /* size of the central directory */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+ us.size_central_dir = uL;
+
+ /* offset of start of central directory with respect to the
+ starting disk number */
+ if (unz64local_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+ us.offset_central_dir = uL;
+
+ /* zipfile comment length */
+ if (unz64local_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK)
+ err=UNZ_ERRNO;
+ }
+
+ if ((central_pos<us.offset_central_dir+us.size_central_dir) &&
+ (err==UNZ_OK))
+ err=UNZ_BADZIPFILE;
+
+ if (err!=UNZ_OK)
+ {
+ ZCLOSE64(us.z_filefunc, us.filestream);
+ return NULL;
+ }
+
+ us.byte_before_the_zipfile = central_pos -
+ (us.offset_central_dir+us.size_central_dir);
+ us.central_pos = central_pos;
+ us.pfile_in_zip_read = NULL;
+ us.encrypted = 0;
+
+
+ s=(unz64_s*)ALLOC(sizeof(unz64_s));
+ if( s != NULL)
+ {
+ *s=us;
+ unzGoToFirstFile((unzFile)s);
+ }
+ return (unzFile)s;
+}
+
+
+extern unzFile ZEXPORT unzOpen2 (const char *path,
+ zlib_filefunc_def* pzlib_filefunc32_def)
+{
+ if (pzlib_filefunc32_def != NULL)
+ {
+ zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
+ fill_zlib_filefunc64_32_def_from_filefunc32(&zlib_filefunc64_32_def_fill,pzlib_filefunc32_def);
+ return unzOpenInternal(path, &zlib_filefunc64_32_def_fill, 0);
+ }
+ else
+ return unzOpenInternal(path, NULL, 0);
+}
+
+extern unzFile ZEXPORT unzOpen2_64 (const void *path,
+ zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ if (pzlib_filefunc_def != NULL)
+ {
+ zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
+ zlib_filefunc64_32_def_fill.zfile_func64 = *pzlib_filefunc_def;
+ zlib_filefunc64_32_def_fill.ztell32_file = NULL;
+ zlib_filefunc64_32_def_fill.zseek32_file = NULL;
+ return unzOpenInternal(path, &zlib_filefunc64_32_def_fill, 1);
+ }
+ else
+ return unzOpenInternal(path, NULL, 1);
+}
+
+extern unzFile ZEXPORT unzOpen (const char *path)
+{
+ return unzOpenInternal(path, NULL, 0);
+}
+
+extern unzFile ZEXPORT unzOpen64 (const void *path)
+{
+ return unzOpenInternal(path, NULL, 1);
+}
+
+/*
+ Close a ZipFile opened with unzOpen.
+ If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+ these files MUST be closed with unzCloseCurrentFile before call unzClose.
+ return UNZ_OK if there is no problem. */
+extern int ZEXPORT unzClose (unzFile file)
+{
+ unz64_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+
+ if (s->pfile_in_zip_read!=NULL)
+ unzCloseCurrentFile(file);
+
+ ZCLOSE64(s->z_filefunc, s->filestream);
+ TRYFREE(s);
+ return UNZ_OK;
+}
+
+
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem. */
+extern int ZEXPORT unzGetGlobalInfo64 (unzFile file, unz_global_info64* pglobal_info)
+{
+ unz64_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ *pglobal_info=s->gi;
+ return UNZ_OK;
+}
+
+extern int ZEXPORT unzGetGlobalInfo (unzFile file, unz_global_info* pglobal_info32)
+{
+ unz64_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ /* to do : check if number_entry is not truncated */
+ pglobal_info32->number_entry = (uLong)s->gi.number_entry;
+ pglobal_info32->size_comment = s->gi.size_comment;
+ return UNZ_OK;
+}
+/*
+ Translate date/time from Dos format to tm_unz (readable more easilty)
+*/
+local void unz64local_DosDateToTmuDate (ZPOS64_T ulDosDate, tm_unz* ptm)
+{
+ ZPOS64_T uDate;
+ uDate = (ZPOS64_T)(ulDosDate>>16);
+ ptm->tm_mday = (uInt)(uDate&0x1f) ;
+ ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ;
+ ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;
+
+ ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);
+ ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ;
+ ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ;
+}
+
+/*
+ Get Info about the current file in the zipfile, with internal only info
+*/
+local int unz64local_GetCurrentFileInfoInternal OF((unzFile file,
+ unz_file_info64 *pfile_info,
+ unz_file_info64_internal
+ *pfile_info_internal,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+
+local int unz64local_GetCurrentFileInfoInternal (unzFile file,
+ unz_file_info64 *pfile_info,
+ unz_file_info64_internal
+ *pfile_info_internal,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize)
+{
+ unz64_s* s;
+ unz_file_info64 file_info;
+ unz_file_info64_internal file_info_internal;
+ int err=UNZ_OK;
+ uLong uMagic;
+ long lSeek=0;
+ uLong uL;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ if (ZSEEK64(s->z_filefunc, s->filestream,
+ s->pos_in_central_dir+s->byte_before_the_zipfile,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+
+ /* we check the magic */
+ if (err==UNZ_OK)
+ {
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x02014b50)
+ err=UNZ_BADZIPFILE;
+ }
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ unz64local_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
+ err=UNZ_ERRNO;
+ file_info.compressed_size = uL;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
+ err=UNZ_ERRNO;
+ file_info.uncompressed_size = uL;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ // relative offset of local header
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
+ err=UNZ_ERRNO;
+ file_info_internal.offset_curfile = uL;
+
+ lSeek+=file_info.size_filename;
+ if ((err==UNZ_OK) && (szFileName!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_filename<fileNameBufferSize)
+ {
+ *(szFileName+file_info.size_filename)='\0';
+ uSizeRead = file_info.size_filename;
+ }
+ else
+ uSizeRead = fileNameBufferSize;
+
+ if ((file_info.size_filename>0) && (fileNameBufferSize>0))
+ if (ZREAD64(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+ lSeek -= uSizeRead;
+ }
+
+ // Read extrafield
+ if ((err==UNZ_OK) && (extraField!=NULL))
+ {
+ ZPOS64_T uSizeRead ;
+ if (file_info.size_file_extra<extraFieldBufferSize)
+ uSizeRead = file_info.size_file_extra;
+ else
+ uSizeRead = extraFieldBufferSize;
+
+ if (lSeek!=0)
+ {
+ if (ZSEEK64(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ }
+
+ if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
+ if (ZREAD64(s->z_filefunc, s->filestream,extraField,(uLong)uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+
+ lSeek += file_info.size_file_extra - (uLong)uSizeRead;
+ }
+ else
+ lSeek += file_info.size_file_extra;
+
+
+ if ((err==UNZ_OK) && (file_info.size_file_extra != 0))
+ {
+ uLong acc = 0;
+
+ // since lSeek now points to after the extra field we need to move back
+ lSeek -= file_info.size_file_extra;
+
+ if (lSeek!=0)
+ {
+ if (ZSEEK64(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ }
+
+ while(acc < file_info.size_file_extra)
+ {
+ uLong headerId;
+ uLong dataSize;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&headerId) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&dataSize) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* ZIP64 extra fields */
+ if (headerId == 0x0001)
+ {
+ uLong uL;
+
+ if(file_info.uncompressed_size == MAXU32)
+ {
+ if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+ }
+
+ if(file_info.compressed_size == MAXU32)
+ {
+ if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+ }
+
+ if(file_info_internal.offset_curfile == MAXU32)
+ {
+ /* Relative Header offset */
+ if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
+ err=UNZ_ERRNO;
+ }
+
+ if(file_info.disk_num_start == MAXU32)
+ {
+ /* Disk Start Number */
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
+ err=UNZ_ERRNO;
+ }
+
+ }
+ else
+ {
+ if (ZSEEK64(s->z_filefunc, s->filestream,dataSize,ZLIB_FILEFUNC_SEEK_CUR)!=0)
+ err=UNZ_ERRNO;
+ }
+
+ acc += 2 + 2 + dataSize;
+ }
+ }
+
+ if ((err==UNZ_OK) && (szComment!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_file_comment<commentBufferSize)
+ {
+ *(szComment+file_info.size_file_comment)='\0';
+ uSizeRead = file_info.size_file_comment;
+ }
+ else
+ uSizeRead = commentBufferSize;
+
+ if (lSeek!=0)
+ {
+ if (ZSEEK64(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ }
+
+ if ((file_info.size_file_comment>0) && (commentBufferSize>0))
+ if (ZREAD64(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+ lSeek+=file_info.size_file_comment - uSizeRead;
+ }
+ else
+ lSeek+=file_info.size_file_comment;
+
+
+ if ((err==UNZ_OK) && (pfile_info!=NULL))
+ *pfile_info=file_info;
+
+ if ((err==UNZ_OK) && (pfile_info_internal!=NULL))
+ *pfile_info_internal=file_info_internal;
+
+ return err;
+}
+
+
+
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem.
+*/
+extern int ZEXPORT unzGetCurrentFileInfo64 (unzFile file,
+ unz_file_info64 * pfile_info,
+ char * szFileName, uLong fileNameBufferSize,
+ void *extraField, uLong extraFieldBufferSize,
+ char* szComment, uLong commentBufferSize)
+{
+ return unz64local_GetCurrentFileInfoInternal(file,pfile_info,NULL,
+ szFileName,fileNameBufferSize,
+ extraField,extraFieldBufferSize,
+ szComment,commentBufferSize);
+}
+
+extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
+ unz_file_info * pfile_info,
+ char * szFileName, uLong fileNameBufferSize,
+ void *extraField, uLong extraFieldBufferSize,
+ char* szComment, uLong commentBufferSize)
+{
+ int err;
+ unz_file_info64 file_info64;
+ err = unz64local_GetCurrentFileInfoInternal(file,&file_info64,NULL,
+ szFileName,fileNameBufferSize,
+ extraField,extraFieldBufferSize,
+ szComment,commentBufferSize);
+ if ((err==UNZ_OK) && (pfile_info != NULL))
+ {
+ pfile_info->version = file_info64.version;
+ pfile_info->version_needed = file_info64.version_needed;
+ pfile_info->flag = file_info64.flag;
+ pfile_info->compression_method = file_info64.compression_method;
+ pfile_info->dosDate = file_info64.dosDate;
+ pfile_info->crc = file_info64.crc;
+
+ pfile_info->size_filename = file_info64.size_filename;
+ pfile_info->size_file_extra = file_info64.size_file_extra;
+ pfile_info->size_file_comment = file_info64.size_file_comment;
+
+ pfile_info->disk_num_start = file_info64.disk_num_start;
+ pfile_info->internal_fa = file_info64.internal_fa;
+ pfile_info->external_fa = file_info64.external_fa;
+
+ pfile_info->tmu_date = file_info64.tmu_date,
+
+
+ pfile_info->compressed_size = (uLong)file_info64.compressed_size;
+ pfile_info->uncompressed_size = (uLong)file_info64.uncompressed_size;
+
+ }
+ return err;
+}
+/*
+ Set the current file of the zipfile to the first file.
+ return UNZ_OK if there is no problem
+*/
+extern int ZEXPORT unzGoToFirstFile (unzFile file)
+{
+ int err=UNZ_OK;
+ unz64_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ s->pos_in_central_dir=s->offset_central_dir;
+ s->num_file=0;
+ err=unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+/*
+ Set the current file of the zipfile to the next file.
+ return UNZ_OK if there is no problem
+ return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+extern int ZEXPORT unzGoToNextFile (unzFile file)
+{
+ unz64_s* s;
+ int err;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+ if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */
+ if (s->num_file+1==s->gi.number_entry)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
+ s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;
+ s->num_file++;
+ err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+
+/*
+ Try locate the file szFileName in the zipfile.
+ For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+ return value :
+ UNZ_OK if the file is found. It becomes the current file.
+ UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+extern int ZEXPORT unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity)
+{
+ unz64_s* s;
+ int err;
+
+ /* We remember the 'current' position in the file so that we can jump
+ * back there if we fail.
+ */
+ unz_file_info64 cur_file_infoSaved;
+ unz_file_info64_internal cur_file_info_internalSaved;
+ ZPOS64_T num_fileSaved;
+ ZPOS64_T pos_in_central_dirSaved;
+
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+
+ if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP)
+ return UNZ_PARAMERROR;
+
+ s=(unz64_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ /* Save the current state */
+ num_fileSaved = s->num_file;
+ pos_in_central_dirSaved = s->pos_in_central_dir;
+ cur_file_infoSaved = s->cur_file_info;
+ cur_file_info_internalSaved = s->cur_file_info_internal;
+
+ err = unzGoToFirstFile(file);
+
+ while (err == UNZ_OK)
+ {
+ char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];
+ err = unzGetCurrentFileInfo64(file,NULL,
+ szCurrentFileName,sizeof(szCurrentFileName)-1,
+ NULL,0,NULL,0);
+ if (err == UNZ_OK)
+ {
+ if (unzStringFileNameCompare(szCurrentFileName,
+ szFileName,iCaseSensitivity)==0)
+ return UNZ_OK;
+ err = unzGoToNextFile(file);
+ }
+ }
+
+ /* We failed, so restore the state of the 'current file' to where we
+ * were.
+ */
+ s->num_file = num_fileSaved ;
+ s->pos_in_central_dir = pos_in_central_dirSaved ;
+ s->cur_file_info = cur_file_infoSaved;
+ s->cur_file_info_internal = cur_file_info_internalSaved;
+ return err;
+}
+
+
+/*
+///////////////////////////////////////////
+// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net)
+// I need random access
+//
+// Further optimization could be realized by adding an ability
+// to cache the directory in memory. The goal being a single
+// comprehensive file read to put the file I need in a memory.
+*/
+
+/*
+typedef struct unz_file_pos_s
+{
+ ZPOS64_T pos_in_zip_directory; // offset in file
+ ZPOS64_T num_of_file; // # of file
+} unz_file_pos;
+*/
+
+extern int ZEXPORT unzGetFilePos64(unzFile file, unz64_file_pos* file_pos)
+{
+ unz64_s* s;
+
+ if (file==NULL || file_pos==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ file_pos->pos_in_zip_directory = s->pos_in_central_dir;
+ file_pos->num_of_file = s->num_file;
+
+ return UNZ_OK;
+}
+
+extern int ZEXPORT unzGetFilePos(
+ unzFile file,
+ unz_file_pos* file_pos)
+{
+ unz64_file_pos file_pos64;
+ int err = unzGetFilePos64(file,&file_pos64);
+ if (err==UNZ_OK)
+ {
+ file_pos->pos_in_zip_directory = (uLong)file_pos64.pos_in_zip_directory;
+ file_pos->num_of_file = (uLong)file_pos64.num_of_file;
+ }
+ return err;
+}
+
+extern int ZEXPORT unzGoToFilePos64(unzFile file, const unz64_file_pos* file_pos)
+{
+ unz64_s* s;
+ int err;
+
+ if (file==NULL || file_pos==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+
+ /* jump to the right spot */
+ s->pos_in_central_dir = file_pos->pos_in_zip_directory;
+ s->num_file = file_pos->num_of_file;
+
+ /* set the current file */
+ err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ /* return results */
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+extern int ZEXPORT unzGoToFilePos(
+ unzFile file,
+ unz_file_pos* file_pos)
+{
+ unz64_file_pos file_pos64;
+ if (file_pos == NULL)
+ return UNZ_PARAMERROR;
+
+ file_pos64.pos_in_zip_directory = file_pos->pos_in_zip_directory;
+ file_pos64.num_of_file = file_pos->num_of_file;
+ return unzGoToFilePos64(file,&file_pos64);
+}
+
+/*
+// Unzip Helper Functions - should be here?
+///////////////////////////////////////////
+*/
+
+/*
+ Read the local header of the current zipfile
+ Check the coherency of the local header and info in the end of central
+ directory about this file
+ store in *piSizeVar the size of extra info in local header
+ (filename and size of extra field data)
+*/
+local int unz64local_CheckCurrentFileCoherencyHeader (unz64_s* s, uInt* piSizeVar,
+ ZPOS64_T * poffset_local_extrafield,
+ uInt * psize_local_extrafield)
+{
+ uLong uMagic,uData,uFlags;
+ uLong size_filename;
+ uLong size_extra_field;
+ int err=UNZ_OK;
+
+ *piSizeVar = 0;
+ *poffset_local_extrafield = 0;
+ *psize_local_extrafield = 0;
+
+ if (ZSEEK64(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile +
+ s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+
+ if (err==UNZ_OK)
+ {
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x04034b50)
+ err=UNZ_BADZIPFILE;
+ }
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+/*
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))
+ err=UNZ_BADZIPFILE;
+*/
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))
+ err=UNZ_BADZIPFILE;
+
+ if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&
+/* #ifdef HAVE_BZIP2 */
+ (s->cur_file_info.compression_method!=Z_BZIP2ED) &&
+/* #endif */
+ (s->cur_file_info.compression_method!=Z_DEFLATED))
+ err=UNZ_BADZIPFILE;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */
+ err=UNZ_ERRNO;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */
+ err=UNZ_ERRNO;
+ else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unz64local_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */
+ err=UNZ_ERRNO;
+ else if (uData != 0xFFFFFFFF && (err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))
+ err=UNZ_BADZIPFILE;
+
+ *piSizeVar += (uInt)size_filename;
+
+ if (unz64local_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK)
+ err=UNZ_ERRNO;
+ *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +
+ SIZEZIPLOCALHEADER + size_filename;
+ *psize_local_extrafield = (uInt)size_extra_field;
+
+ *piSizeVar += (uInt)size_extra_field;
+
+ return err;
+}
+
+/*
+ Open for reading data the current file in the zipfile.
+ If there is no error and the file is opened, the return value is UNZ_OK.
+*/
+extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
+ int* level, int raw, const char* password)
+{
+ int err=UNZ_OK;
+ uInt iSizeVar;
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ ZPOS64_T offset_local_extrafield; /* offset of the local extra field */
+ uInt size_local_extrafield; /* size of the local extra field */
+# ifndef NOUNCRYPT
+ char source[12];
+# else
+ if (password != NULL)
+ return UNZ_PARAMERROR;
+# endif
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_PARAMERROR;
+
+ if (s->pfile_in_zip_read != NULL)
+ unzCloseCurrentFile(file);
+
+ if (unz64local_CheckCurrentFileCoherencyHeader(s,&iSizeVar, &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)
+ return UNZ_BADZIPFILE;
+
+ pfile_in_zip_read_info = (file_in_zip64_read_info_s*)ALLOC(sizeof(file_in_zip64_read_info_s));
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_INTERNALERROR;
+
+ pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE);
+ pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;
+ pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;
+ pfile_in_zip_read_info->pos_local_extrafield=0;
+ pfile_in_zip_read_info->raw=raw;
+
+ if (pfile_in_zip_read_info->read_buffer==NULL)
+ {
+ TRYFREE(pfile_in_zip_read_info);
+ return UNZ_INTERNALERROR;
+ }
+
+ pfile_in_zip_read_info->stream_initialised=0;
+
+ if (method!=NULL)
+ *method = (int)s->cur_file_info.compression_method;
+
+ if (level!=NULL)
+ {
+ *level = 6;
+ switch (s->cur_file_info.flag & 0x06)
+ {
+ case 6 : *level = 1; break;
+ case 4 : *level = 2; break;
+ case 2 : *level = 9; break;
+ }
+ }
+
+ if ((s->cur_file_info.compression_method!=0) &&
+/* #ifdef HAVE_BZIP2 */
+ (s->cur_file_info.compression_method!=Z_BZIP2ED) &&
+/* #endif */
+ (s->cur_file_info.compression_method!=Z_DEFLATED))
+
+ err=UNZ_BADZIPFILE;
+
+ pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;
+ pfile_in_zip_read_info->crc32=0;
+ pfile_in_zip_read_info->total_out_64=0;
+ pfile_in_zip_read_info->compression_method = s->cur_file_info.compression_method;
+ pfile_in_zip_read_info->filestream=s->filestream;
+ pfile_in_zip_read_info->z_filefunc=s->z_filefunc;
+ pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;
+
+ pfile_in_zip_read_info->stream.total_out = 0;
+
+ if ((s->cur_file_info.compression_method==Z_BZIP2ED) && (!raw))
+ {
+#ifdef HAVE_BZIP2
+ pfile_in_zip_read_info->bstream.bzalloc = (void *(*) (void *, int, int))0;
+ pfile_in_zip_read_info->bstream.bzfree = (free_func)0;
+ pfile_in_zip_read_info->bstream.opaque = (voidpf)0;
+ pfile_in_zip_read_info->bstream.state = (voidpf)0;
+
+ pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
+ pfile_in_zip_read_info->stream.zfree = (free_func)0;
+ pfile_in_zip_read_info->stream.opaque = (voidpf)0;
+ pfile_in_zip_read_info->stream.next_in = (voidpf)0;
+ pfile_in_zip_read_info->stream.avail_in = 0;
+
+ err=BZ2_bzDecompressInit(&pfile_in_zip_read_info->bstream, 0, 0);
+ if (err == Z_OK)
+ pfile_in_zip_read_info->stream_initialised=Z_BZIP2ED;
+ else
+ {
+ TRYFREE(pfile_in_zip_read_info);
+ return err;
+ }
+#else
+ pfile_in_zip_read_info->raw=1;
+#endif
+ }
+ else if ((s->cur_file_info.compression_method==Z_DEFLATED) && (!raw))
+ {
+ pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
+ pfile_in_zip_read_info->stream.zfree = (free_func)0;
+ pfile_in_zip_read_info->stream.opaque = (voidpf)0;
+ pfile_in_zip_read_info->stream.next_in = 0;
+ pfile_in_zip_read_info->stream.avail_in = 0;
+
+ err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS);
+ if (err == Z_OK)
+ pfile_in_zip_read_info->stream_initialised=Z_DEFLATED;
+ else
+ {
+ TRYFREE(pfile_in_zip_read_info);
+ return err;
+ }
+ /* windowBits is passed < 0 to tell that there is no zlib header.
+ * Note that in this case inflate *requires* an extra "dummy" byte
+ * after the compressed stream in order to complete decompression and
+ * return Z_STREAM_END.
+ * In unzip, i don't wait absolutely Z_STREAM_END because I known the
+ * size of both compressed and uncompressed data
+ */
+ }
+ pfile_in_zip_read_info->rest_read_compressed =
+ s->cur_file_info.compressed_size ;
+ pfile_in_zip_read_info->rest_read_uncompressed =
+ s->cur_file_info.uncompressed_size ;
+
+
+ pfile_in_zip_read_info->pos_in_zipfile =
+ s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER +
+ iSizeVar;
+
+ pfile_in_zip_read_info->stream.avail_in = (uInt)0;
+
+ s->pfile_in_zip_read = pfile_in_zip_read_info;
+ s->encrypted = 0;
+
+# ifndef NOUNCRYPT
+ if (password != NULL)
+ {
+ int i;
+ s->pcrc_32_tab = get_crc_table();
+ init_keys(password,s->keys,s->pcrc_32_tab);
+ if (ZSEEK64(s->z_filefunc, s->filestream,
+ s->pfile_in_zip_read->pos_in_zipfile +
+ s->pfile_in_zip_read->byte_before_the_zipfile,
+ SEEK_SET)!=0)
+ return UNZ_INTERNALERROR;
+ if(ZREAD64(s->z_filefunc, s->filestream,source, 12)<12)
+ return UNZ_INTERNALERROR;
+
+ for (i = 0; i<12; i++)
+ zdecode(s->keys,s->pcrc_32_tab,source[i]);
+
+ s->pfile_in_zip_read->pos_in_zipfile+=12;
+ s->encrypted=1;
+ }
+# endif
+
+
+ return UNZ_OK;
+}
+
+extern int ZEXPORT unzOpenCurrentFile (unzFile file)
+{
+ return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL);
+}
+
+extern int ZEXPORT unzOpenCurrentFilePassword (unzFile file, const char* password)
+{
+ return unzOpenCurrentFile3(file, NULL, NULL, 0, password);
+}
+
+extern int ZEXPORT unzOpenCurrentFile2 (unzFile file, int* method, int* level, int raw)
+{
+ return unzOpenCurrentFile3(file, method, level, raw, NULL);
+}
+
+/** Addition for GDAL : START */
+
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64( unzFile file)
+{
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ s=(unz64_s*)file;
+ if (file==NULL)
+ return 0; //UNZ_PARAMERROR;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+ if (pfile_in_zip_read_info==NULL)
+ return 0; //UNZ_PARAMERROR;
+ return pfile_in_zip_read_info->pos_in_zipfile +
+ pfile_in_zip_read_info->byte_before_the_zipfile;
+}
+
+/** Addition for GDAL : END */
+
+/*
+ Read bytes from the current file.
+ buf contain buffer where data must be copied
+ len the size of buf.
+
+ return the number of byte copied if somes bytes are copied
+ return 0 if the end of file was reached
+ return <0 with error code if there is an error
+ (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+extern int ZEXPORT unzReadCurrentFile (unzFile file, voidp buf, unsigned len)
+{
+ int err=UNZ_OK;
+ uInt iRead = 0;
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+
+ if (pfile_in_zip_read_info->read_buffer == NULL)
+ return UNZ_END_OF_LIST_OF_FILE;
+ if (len==0)
+ return 0;
+
+ pfile_in_zip_read_info->stream.next_out = (Bytef*)buf;
+
+ pfile_in_zip_read_info->stream.avail_out = (uInt)len;
+
+ if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
+ (!(pfile_in_zip_read_info->raw)))
+ pfile_in_zip_read_info->stream.avail_out =
+ (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
+
+ if ((len>pfile_in_zip_read_info->rest_read_compressed+
+ pfile_in_zip_read_info->stream.avail_in) &&
+ (pfile_in_zip_read_info->raw))
+ pfile_in_zip_read_info->stream.avail_out =
+ (uInt)pfile_in_zip_read_info->rest_read_compressed+
+ pfile_in_zip_read_info->stream.avail_in;
+
+ while (pfile_in_zip_read_info->stream.avail_out>0)
+ {
+ if ((pfile_in_zip_read_info->stream.avail_in==0) &&
+ (pfile_in_zip_read_info->rest_read_compressed>0))
+ {
+ uInt uReadThis = UNZ_BUFSIZE;
+ if (pfile_in_zip_read_info->rest_read_compressed<uReadThis)
+ uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;
+ if (uReadThis == 0)
+ return UNZ_EOF;
+ if (ZSEEK64(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->pos_in_zipfile +
+ pfile_in_zip_read_info->byte_before_the_zipfile,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+ if (ZREAD64(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->read_buffer,
+ uReadThis)!=uReadThis)
+ return UNZ_ERRNO;
+
+
+# ifndef NOUNCRYPT
+ if(s->encrypted)
+ {
+ uInt i;
+ for(i=0;i<uReadThis;i++)
+ pfile_in_zip_read_info->read_buffer[i] =
+ zdecode(s->keys,s->pcrc_32_tab,
+ pfile_in_zip_read_info->read_buffer[i]);
+ }
+# endif
+
+
+ pfile_in_zip_read_info->pos_in_zipfile += uReadThis;
+
+ pfile_in_zip_read_info->rest_read_compressed-=uReadThis;
+
+ pfile_in_zip_read_info->stream.next_in =
+ (Bytef*)pfile_in_zip_read_info->read_buffer;
+ pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;
+ }
+
+ if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw))
+ {
+ uInt uDoCopy,i ;
+
+ if ((pfile_in_zip_read_info->stream.avail_in == 0) &&
+ (pfile_in_zip_read_info->rest_read_compressed == 0))
+ return (iRead==0) ? UNZ_EOF : iRead;
+
+ if (pfile_in_zip_read_info->stream.avail_out <
+ pfile_in_zip_read_info->stream.avail_in)
+ uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
+ else
+ uDoCopy = pfile_in_zip_read_info->stream.avail_in ;
+
+ for (i=0;i<uDoCopy;i++)
+ *(pfile_in_zip_read_info->stream.next_out+i) =
+ *(pfile_in_zip_read_info->stream.next_in+i);
+
+ pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uDoCopy;
+
+ pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,
+ pfile_in_zip_read_info->stream.next_out,
+ uDoCopy);
+ pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;
+ pfile_in_zip_read_info->stream.avail_in -= uDoCopy;
+ pfile_in_zip_read_info->stream.avail_out -= uDoCopy;
+ pfile_in_zip_read_info->stream.next_out += uDoCopy;
+ pfile_in_zip_read_info->stream.next_in += uDoCopy;
+ pfile_in_zip_read_info->stream.total_out += uDoCopy;
+ iRead += uDoCopy;
+ }
+ else if (pfile_in_zip_read_info->compression_method==Z_BZIP2ED)
+ {
+#ifdef HAVE_BZIP2
+ uLong uTotalOutBefore,uTotalOutAfter;
+ const Bytef *bufBefore;
+ uLong uOutThis;
+
+ pfile_in_zip_read_info->bstream.next_in = (char*)pfile_in_zip_read_info->stream.next_in;
+ pfile_in_zip_read_info->bstream.avail_in = pfile_in_zip_read_info->stream.avail_in;
+ pfile_in_zip_read_info->bstream.total_in_lo32 = pfile_in_zip_read_info->stream.total_in;
+ pfile_in_zip_read_info->bstream.total_in_hi32 = 0;
+ pfile_in_zip_read_info->bstream.next_out = (char*)pfile_in_zip_read_info->stream.next_out;
+ pfile_in_zip_read_info->bstream.avail_out = pfile_in_zip_read_info->stream.avail_out;
+ pfile_in_zip_read_info->bstream.total_out_lo32 = pfile_in_zip_read_info->stream.total_out;
+ pfile_in_zip_read_info->bstream.total_out_hi32 = 0;
+
+ uTotalOutBefore = pfile_in_zip_read_info->bstream.total_out_lo32;
+ bufBefore = (const Bytef *)pfile_in_zip_read_info->bstream.next_out;
+
+ err=BZ2_bzDecompress(&pfile_in_zip_read_info->bstream);
+
+ uTotalOutAfter = pfile_in_zip_read_info->bstream.total_out_lo32;
+ uOutThis = uTotalOutAfter-uTotalOutBefore;
+
+ pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis;
+
+ pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,bufBefore, (uInt)(uOutThis));
+ pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis;
+ iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
+
+ pfile_in_zip_read_info->stream.next_in = (Bytef*)pfile_in_zip_read_info->bstream.next_in;
+ pfile_in_zip_read_info->stream.avail_in = pfile_in_zip_read_info->bstream.avail_in;
+ pfile_in_zip_read_info->stream.total_in = pfile_in_zip_read_info->bstream.total_in_lo32;
+ pfile_in_zip_read_info->stream.next_out = (Bytef*)pfile_in_zip_read_info->bstream.next_out;
+ pfile_in_zip_read_info->stream.avail_out = pfile_in_zip_read_info->bstream.avail_out;
+ pfile_in_zip_read_info->stream.total_out = pfile_in_zip_read_info->bstream.total_out_lo32;
+
+ if (err==BZ_STREAM_END)
+ return (iRead==0) ? UNZ_EOF : iRead;
+ if (err!=BZ_OK)
+ break;
+#endif
+ } // end Z_BZIP2ED
+ else
+ {
+ ZPOS64_T uTotalOutBefore,uTotalOutAfter;
+ const Bytef *bufBefore;
+ ZPOS64_T uOutThis;
+ int flush=Z_SYNC_FLUSH;
+
+ uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;
+ bufBefore = pfile_in_zip_read_info->stream.next_out;
+
+ /*
+ if ((pfile_in_zip_read_info->rest_read_uncompressed ==
+ pfile_in_zip_read_info->stream.avail_out) &&
+ (pfile_in_zip_read_info->rest_read_compressed == 0))
+ flush = Z_FINISH;
+ */
+ err=inflate(&pfile_in_zip_read_info->stream,flush);
+
+ if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
+ err = Z_DATA_ERROR;
+
+ uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
+ uOutThis = uTotalOutAfter-uTotalOutBefore;
+
+ pfile_in_zip_read_info->total_out_64 = pfile_in_zip_read_info->total_out_64 + uOutThis;
+
+ pfile_in_zip_read_info->crc32 =
+ crc32(pfile_in_zip_read_info->crc32,bufBefore,
+ (uInt)(uOutThis));
+
+ pfile_in_zip_read_info->rest_read_uncompressed -=
+ uOutThis;
+
+ iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
+
+ if (err==Z_STREAM_END)
+ return (iRead==0) ? UNZ_EOF : iRead;
+ if (err!=Z_OK)
+ break;
+ }
+ }
+
+ if (err==Z_OK)
+ return iRead;
+ return err;
+}
+
+
+/*
+ Give the current position in uncompressed data
+*/
+extern z_off_t ZEXPORT unztell (unzFile file)
+{
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ return (z_off_t)pfile_in_zip_read_info->stream.total_out;
+}
+
+extern ZPOS64_T ZEXPORT unztell64 (unzFile file)
+{
+
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return (ZPOS64_T)-1;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return (ZPOS64_T)-1;
+
+ return pfile_in_zip_read_info->total_out_64;
+}
+
+
+/*
+ return 1 if the end of file was reached, 0 elsewhere
+*/
+extern int ZEXPORT unzeof (unzFile file)
+{
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
+ return 1;
+ else
+ return 0;
+}
+
+
+
+/*
+Read extra field from the current file (opened by unzOpenCurrentFile)
+This is the local-header version of the extra field (sometimes, there is
+more info in the local-header version than in the central-header)
+
+ if buf==NULL, it return the size of the local extra field that can be read
+
+ if buf!=NULL, len is the size of the buffer, the extra header is copied in
+ buf.
+ the return value is the number of bytes copied in buf, or (if <0)
+ the error code
+*/
+extern int ZEXPORT unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len)
+{
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ uInt read_now;
+ ZPOS64_T size_to_read;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ size_to_read = (pfile_in_zip_read_info->size_local_extrafield -
+ pfile_in_zip_read_info->pos_local_extrafield);
+
+ if (buf==NULL)
+ return (int)size_to_read;
+
+ if (len>size_to_read)
+ read_now = (uInt)size_to_read;
+ else
+ read_now = (uInt)len ;
+
+ if (read_now==0)
+ return 0;
+
+ if (ZSEEK64(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->offset_local_extrafield +
+ pfile_in_zip_read_info->pos_local_extrafield,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+ if (ZREAD64(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ buf,read_now)!=read_now)
+ return UNZ_ERRNO;
+
+ return (int)read_now;
+}
+
+/*
+ Close the file in zip opened with unzOpenCurrentFile
+ Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+extern int ZEXPORT unzCloseCurrentFile (unzFile file)
+{
+ int err=UNZ_OK;
+
+ unz64_s* s;
+ file_in_zip64_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+
+ if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) &&
+ (!pfile_in_zip_read_info->raw))
+ {
+ if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)
+ err=UNZ_CRCERROR;
+ }
+
+
+ TRYFREE(pfile_in_zip_read_info->read_buffer);
+ pfile_in_zip_read_info->read_buffer = NULL;
+ if (pfile_in_zip_read_info->stream_initialised == Z_DEFLATED)
+ inflateEnd(&pfile_in_zip_read_info->stream);
+#ifdef HAVE_BZIP2
+ else if (pfile_in_zip_read_info->stream_initialised == Z_BZIP2ED)
+ BZ2_bzDecompressEnd(&pfile_in_zip_read_info->bstream);
+#endif
+
+
+ pfile_in_zip_read_info->stream_initialised = 0;
+ TRYFREE(pfile_in_zip_read_info);
+
+ s->pfile_in_zip_read=NULL;
+
+ return err;
+}
+
+
+/*
+ Get the global comment string of the ZipFile, in the szComment buffer.
+ uSizeBuf is the size of the szComment buffer.
+ return the number of byte copied or an error code <0
+*/
+extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uSizeBuf)
+{
+ unz64_s* s;
+ uLong uReadThis ;
+ if (file==NULL)
+ return (int)UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+
+ uReadThis = uSizeBuf;
+ if (uReadThis>s->gi.size_comment)
+ uReadThis = s->gi.size_comment;
+
+ if (ZSEEK64(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+ if (uReadThis>0)
+ {
+ *szComment='\0';
+ if (ZREAD64(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis)
+ return UNZ_ERRNO;
+ }
+
+ if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment))
+ *(szComment+s->gi.size_comment)='\0';
+ return (int)uReadThis;
+}
+
+/* Additions by RX '2004 */
+extern ZPOS64_T ZEXPORT unzGetOffset64(unzFile file)
+{
+ unz64_s* s;
+
+ if (file==NULL)
+ return 0; //UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+ if (!s->current_file_ok)
+ return 0;
+ if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
+ if (s->num_file==s->gi.number_entry)
+ return 0;
+ return s->pos_in_central_dir;
+}
+
+extern uLong ZEXPORT unzGetOffset (unzFile file)
+{
+ ZPOS64_T offset64;
+
+ if (file==NULL)
+ return 0; //UNZ_PARAMERROR;
+ offset64 = unzGetOffset64(file);
+ return (uLong)offset64;
+}
+
+extern int ZEXPORT unzSetOffset64(unzFile file, ZPOS64_T pos)
+{
+ unz64_s* s;
+ int err;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz64_s*)file;
+
+ s->pos_in_central_dir = pos;
+ s->num_file = s->gi.number_entry; /* hack */
+ err = unz64local_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos)
+{
+ return unzSetOffset64(file,pos);
+}
--- /dev/null
+/* unzip.h -- IO for uncompress .zip files using zlib
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications of Unzip for Zip64
+ Copyright (C) 2007-2008 Even Rouault
+
+ Modifications for Zip64 support on both zip and unzip
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+ ---------------------------------------------------------------------------------
+
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ ---------------------------------------------------------------------------------
+
+ Changes
+
+ See header of unzip64.c
+
+*/
+
+#ifndef _unz64_H
+#define _unz64_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+ from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__;
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO (Z_ERRNO)
+#define UNZ_EOF (0)
+#define UNZ_PARAMERROR (-102)
+#define UNZ_BADZIPFILE (-103)
+#define UNZ_INTERNALERROR (-104)
+#define UNZ_CRCERROR (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s
+{
+ uInt tm_sec; /* seconds after the minute - [0,59] */
+ uInt tm_min; /* minutes after the hour - [0,59] */
+ uInt tm_hour; /* hours since midnight - [0,23] */
+ uInt tm_mday; /* day of the month - [1,31] */
+ uInt tm_mon; /* months since January - [0,11] */
+ uInt tm_year; /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+ These data comes from the end of central dir */
+typedef struct unz_global_info64_s
+{
+ ZPOS64_T number_entry; /* total number of entries in
+ the central dir on this disk */
+ uLong size_comment; /* size of the global comment of the zipfile */
+} unz_global_info64;
+
+typedef struct unz_global_info_s
+{
+ uLong number_entry; /* total number of entries in
+ the central dir on this disk */
+ uLong size_comment; /* size of the global comment of the zipfile */
+} unz_global_info;
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info64_s
+{
+ uLong version; /* version made by 2 bytes */
+ uLong version_needed; /* version needed to extract 2 bytes */
+ uLong flag; /* general purpose bit flag 2 bytes */
+ uLong compression_method; /* compression method 2 bytes */
+ uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
+ uLong crc; /* crc-32 4 bytes */
+ ZPOS64_T compressed_size; /* compressed size 8 bytes */
+ ZPOS64_T uncompressed_size; /* uncompressed size 8 bytes */
+ uLong size_filename; /* filename length 2 bytes */
+ uLong size_file_extra; /* extra field length 2 bytes */
+ uLong size_file_comment; /* file comment length 2 bytes */
+
+ uLong disk_num_start; /* disk number start 2 bytes */
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+
+ tm_unz tmu_date;
+} unz_file_info64;
+
+typedef struct unz_file_info_s
+{
+ uLong version; /* version made by 2 bytes */
+ uLong version_needed; /* version needed to extract 2 bytes */
+ uLong flag; /* general purpose bit flag 2 bytes */
+ uLong compression_method; /* compression method 2 bytes */
+ uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
+ uLong crc; /* crc-32 4 bytes */
+ uLong compressed_size; /* compressed size 4 bytes */
+ uLong uncompressed_size; /* uncompressed size 4 bytes */
+ uLong size_filename; /* filename length 2 bytes */
+ uLong size_file_extra; /* extra field length 2 bytes */
+ uLong size_file_comment; /* file comment length 2 bytes */
+
+ uLong disk_num_start; /* disk number start 2 bytes */
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+
+ tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+ const char* fileName2,
+ int iCaseSensitivity));
+/*
+ Compare two filename (fileName1,fileName2).
+ If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+ If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+ or strcasecmp)
+ If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+ (like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+extern unzFile ZEXPORT unzOpen64 OF((const void *path));
+/*
+ Open a Zip file. path contain the full pathname (by example,
+ on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
+ "zlib/zlib113.zip".
+ If the zipfile cannot be opened (file don't exist or in not valid), the
+ return value is NULL.
+ Else, the return value is a unzFile Handle, usable with other function
+ of this unzip package.
+ the "64" function take a const void* pointer, because the path is just the
+ value passed to the open64_file_func callback.
+ Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path
+ is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char*
+ does not describe the reality
+*/
+
+
+extern unzFile ZEXPORT unzOpen2 OF((const char *path,
+ zlib_filefunc_def* pzlib_filefunc_def));
+/*
+ Open a Zip file, like unzOpen, but provide a set of file low level API
+ for read/write the zip file (see ioapi.h)
+*/
+
+extern unzFile ZEXPORT unzOpen2_64 OF((const void *path,
+ zlib_filefunc64_def* pzlib_filefunc_def));
+/*
+ Open a Zip file, like unz64Open, but provide a set of file low level API
+ for read/write the zip file (see ioapi.h)
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+ Close a ZipFile opened with unzOpen.
+ If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+ these files MUST be closed with unzCloseCurrentFile before call unzClose.
+ return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+ unz_global_info *pglobal_info));
+
+extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file,
+ unz_global_info64 *pglobal_info));
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+ char *szComment,
+ uLong uSizeBuf));
+/*
+ Get the global comment string of the ZipFile, in the szComment buffer.
+ uSizeBuf is the size of the szComment buffer.
+ return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the first file.
+ return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the next file.
+ return UNZ_OK if there is no problem
+ return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file,
+ const char *szFileName,
+ int iCaseSensitivity));
+/*
+ Try locate the file szFileName in the zipfile.
+ For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+ return value :
+ UNZ_OK if the file is found. It becomes the current file.
+ UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+/* ****************************************** */
+/* Ryan supplied functions */
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_pos_s
+{
+ uLong pos_in_zip_directory; /* offset in zip file directory */
+ uLong num_of_file; /* # of file */
+} unz_file_pos;
+
+extern int ZEXPORT unzGetFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+typedef struct unz64_file_pos_s
+{
+ ZPOS64_T pos_in_zip_directory; /* offset in zip file directory */
+ ZPOS64_T num_of_file; /* # of file */
+} unz64_file_pos;
+
+extern int ZEXPORT unzGetFilePos64(
+ unzFile file,
+ unz64_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos64(
+ unzFile file,
+ const unz64_file_pos* file_pos);
+
+/* ****************************************** */
+
+extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file,
+ unz_file_info64 *pfile_info,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+ unz_file_info *pfile_info,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+/*
+ Get Info about the current file
+ if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+ the current file
+ if szFileName!=NULL, the filemane string will be copied in szFileName
+ (fileNameBufferSize is the size of the buffer)
+ if extraField!=NULL, the extra field information will be copied in extraField
+ (extraFieldBufferSize is the size of the buffer).
+ This is the Central-header version of the extra field
+ if szComment!=NULL, the comment string of the file will be copied in szComment
+ (commentBufferSize is the size of the buffer)
+*/
+
+
+/** Addition for GDAL : START */
+
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
+
+/** Addition for GDAL : END */
+
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+ from it, and close it (you can close it before reading all the file)
+ */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+ Open for reading data the current file in the zipfile.
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
+ const char* password));
+/*
+ Open for reading data the current file in the zipfile.
+ password is a crypting password
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw,
+ const char* password));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+ Close the file in zip opened with unzOpenCurrentFile
+ Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read bytes from the current file (opened by unzOpenCurrentFile)
+ buf contain buffer where data must be copied
+ len the size of buf.
+
+ return the number of byte copied if somes bytes are copied
+ return 0 if the end of file was reached
+ return <0 with error code if there is an error
+ (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+
+extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file));
+/*
+ Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+ return 1 if the end of file was reached, 0 elsewhere
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read extra field from the current file (opened by unzOpenCurrentFile)
+ This is the local-header version of the extra field (sometimes, there is
+ more info in the local-header version than in the central-header)
+
+ if buf==NULL, it return the size of the local extra field
+
+ if buf!=NULL, len is the size of the buffer, the extra header is copied in
+ buf.
+ the return value is the number of bytes copied in buf, or (if <0)
+ the error code
+*/
+
+/***************************************************************************/
+
+/* Get the current file offset */
+extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file);
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos);
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz64_H */
--- /dev/null
+/* zip.c -- IO on .zip files using zlib
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+ Changes
+ Oct-2009 - Mathias Svensson - Remove old C style function prototypes
+ Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives
+ Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions.
+ Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data
+ It is used when recreting zip archive with RAW when deleting items from a zip.
+ ZIP64 data is automaticly added to items that needs it, and existing ZIP64 data need to be removed.
+ Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required)
+ Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
+
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include "zlib.h"
+#include "zip.h"
+
+#ifdef STDC
+# include <stddef.h>
+# include <string.h>
+# include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+ extern int errno;
+#else
+# include <errno.h>
+#endif
+
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#ifndef VERSIONMADEBY
+# define VERSIONMADEBY (0x0) /* platform depedent */
+#endif
+
+#ifndef Z_BUFSIZE
+#define Z_BUFSIZE (64*1024) //(16384)
+#endif
+
+#ifndef Z_MAXFILENAMEINZIP
+#define Z_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+/*
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+*/
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+
+// NOT sure that this work on ALL platform
+#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32))
+
+#ifndef SEEK_CUR
+#define SEEK_CUR 1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END 2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET 0
+#endif
+
+#ifndef DEF_MEM_LEVEL
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+#endif
+const char zip_copyright[] =" zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
+
+
+#define SIZEDATA_INDATABLOCK (4096-(4*4))
+
+#define LOCALHEADERMAGIC (0x04034b50)
+#define CENTRALHEADERMAGIC (0x02014b50)
+#define ENDHEADERMAGIC (0x06054b50)
+#define ZIP64ENDHEADERMAGIC (0x6064b50)
+#define ZIP64ENDLOCHEADERMAGIC (0x7064b50)
+
+#define FLAG_LOCALHEADER_OFFSET (0x06)
+#define CRC_LOCALHEADER_OFFSET (0x0e)
+
+#define SIZECENTRALHEADER (0x2e) /* 46 */
+
+typedef struct linkedlist_datablock_internal_s
+{
+ struct linkedlist_datablock_internal_s* next_datablock;
+ uLong avail_in_this_block;
+ uLong filled_in_this_block;
+ uLong unused; /* for future use and alignement */
+ unsigned char data[SIZEDATA_INDATABLOCK];
+} linkedlist_datablock_internal;
+
+typedef struct linkedlist_data_s
+{
+ linkedlist_datablock_internal* first_block;
+ linkedlist_datablock_internal* last_block;
+} linkedlist_data;
+
+
+typedef struct
+{
+ z_stream stream; /* zLib stream structure for inflate */
+#ifdef HAVE_BZIP2
+ bz_stream bstream; /* bzLib stream structure for bziped */
+#endif
+
+ int stream_initialised; /* 1 is stream is initialised */
+ uInt pos_in_buffered_data; /* last written byte in buffered_data */
+
+ ZPOS64_T pos_local_header; /* offset of the local header of the file
+ currenty writing */
+ char* central_header; /* central header data for the current file */
+ uLong size_centralExtra;
+ uLong size_centralheader; /* size of the central header for cur file */
+ uLong size_centralExtraFree; /* Extra bytes allocated to the centralheader but that are not used */
+ uLong flag; /* flag of the file currently writing */
+
+ int method; /* compression method of file currenty wr.*/
+ int raw; /* 1 for directly writing raw data */
+ Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
+ uLong dosDate;
+ uLong crc32;
+ int encrypt;
+ int zip64; /* Add ZIP64 extened information in the extra field */
+ ZPOS64_T pos_zip64extrainfo;
+ ZPOS64_T totalCompressedData;
+ ZPOS64_T totalUncompressedData;
+#ifndef NOCRYPT
+ unsigned long keys[3]; /* keys defining the pseudo-random sequence */
+ const z_crc_t* pcrc_32_tab;
+ int crypt_header_size;
+#endif
+} curfile64_info;
+
+typedef struct
+{
+ zlib_filefunc64_32_def z_filefunc;
+ voidpf filestream; /* io structore of the zipfile */
+ linkedlist_data central_dir;/* datablock with central dir in construction*/
+ int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/
+ curfile64_info ci; /* info on the file curretly writing */
+
+ ZPOS64_T begin_pos; /* position of the beginning of the zipfile */
+ ZPOS64_T add_position_when_writting_offset;
+ ZPOS64_T number_entry;
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+ char *globalcomment;
+#endif
+
+} zip64_internal;
+
+
+#ifndef NOCRYPT
+#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED
+#include "crypt.h"
+#endif
+
+local linkedlist_datablock_internal* allocate_new_datablock()
+{
+ linkedlist_datablock_internal* ldi;
+ ldi = (linkedlist_datablock_internal*)
+ ALLOC(sizeof(linkedlist_datablock_internal));
+ if (ldi!=NULL)
+ {
+ ldi->next_datablock = NULL ;
+ ldi->filled_in_this_block = 0 ;
+ ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
+ }
+ return ldi;
+}
+
+local void free_datablock(linkedlist_datablock_internal* ldi)
+{
+ while (ldi!=NULL)
+ {
+ linkedlist_datablock_internal* ldinext = ldi->next_datablock;
+ TRYFREE(ldi);
+ ldi = ldinext;
+ }
+}
+
+local void init_linkedlist(linkedlist_data* ll)
+{
+ ll->first_block = ll->last_block = NULL;
+}
+
+local void free_linkedlist(linkedlist_data* ll)
+{
+ free_datablock(ll->first_block);
+ ll->first_block = ll->last_block = NULL;
+}
+
+
+local int add_data_in_datablock(linkedlist_data* ll, const void* buf, uLong len)
+{
+ linkedlist_datablock_internal* ldi;
+ const unsigned char* from_copy;
+
+ if (ll==NULL)
+ return ZIP_INTERNALERROR;
+
+ if (ll->last_block == NULL)
+ {
+ ll->first_block = ll->last_block = allocate_new_datablock();
+ if (ll->first_block == NULL)
+ return ZIP_INTERNALERROR;
+ }
+
+ ldi = ll->last_block;
+ from_copy = (unsigned char*)buf;
+
+ while (len>0)
+ {
+ uInt copy_this;
+ uInt i;
+ unsigned char* to_copy;
+
+ if (ldi->avail_in_this_block==0)
+ {
+ ldi->next_datablock = allocate_new_datablock();
+ if (ldi->next_datablock == NULL)
+ return ZIP_INTERNALERROR;
+ ldi = ldi->next_datablock ;
+ ll->last_block = ldi;
+ }
+
+ if (ldi->avail_in_this_block < len)
+ copy_this = (uInt)ldi->avail_in_this_block;
+ else
+ copy_this = (uInt)len;
+
+ to_copy = &(ldi->data[ldi->filled_in_this_block]);
+
+ for (i=0;i<copy_this;i++)
+ *(to_copy+i)=*(from_copy+i);
+
+ ldi->filled_in_this_block += copy_this;
+ ldi->avail_in_this_block -= copy_this;
+ from_copy += copy_this ;
+ len -= copy_this;
+ }
+ return ZIP_OK;
+}
+
+
+
+/****************************************************************************/
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+/* ===========================================================================
+ Inputs a long in LSB order to the given file
+ nbByte == 1, 2 ,4 or 8 (byte, short or long, ZPOS64_T)
+*/
+
+local int zip64local_putValue OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte));
+local int zip64local_putValue (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T x, int nbByte)
+{
+ unsigned char buf[8];
+ int n;
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = (unsigned char)(x & 0xff);
+ x >>= 8;
+ }
+ if (x != 0)
+ { /* data overflow - hack for ZIP64 (X Roche) */
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = 0xff;
+ }
+ }
+
+ if (ZWRITE64(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
+ return ZIP_ERRNO;
+ else
+ return ZIP_OK;
+}
+
+local void zip64local_putValue_inmemory OF((void* dest, ZPOS64_T x, int nbByte));
+local void zip64local_putValue_inmemory (void* dest, ZPOS64_T x, int nbByte)
+{
+ unsigned char* buf=(unsigned char*)dest;
+ int n;
+ for (n = 0; n < nbByte; n++) {
+ buf[n] = (unsigned char)(x & 0xff);
+ x >>= 8;
+ }
+
+ if (x != 0)
+ { /* data overflow - hack for ZIP64 */
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = 0xff;
+ }
+ }
+}
+
+/****************************************************************************/
+
+
+local uLong zip64local_TmzDateToDosDate(const tm_zip* ptm)
+{
+ uLong year = (uLong)ptm->tm_year;
+ if (year>=1980)
+ year-=1980;
+ else if (year>=80)
+ year-=80;
+ return
+ (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
+ ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
+}
+
+
+/****************************************************************************/
+
+local int zip64local_getByte OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, int *pi));
+
+local int zip64local_getByte(const zlib_filefunc64_32_def* pzlib_filefunc_def,voidpf filestream,int* pi)
+{
+ unsigned char c;
+ int err = (int)ZREAD64(*pzlib_filefunc_def,filestream,&c,1);
+ if (err==1)
+ {
+ *pi = (int)c;
+ return ZIP_OK;
+ }
+ else
+ {
+ if (ZERROR64(*pzlib_filefunc_def,filestream))
+ return ZIP_ERRNO;
+ else
+ return ZIP_EOF;
+ }
+}
+
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets
+*/
+local int zip64local_getShort OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX));
+
+local int zip64local_getShort (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX)
+{
+ uLong x ;
+ int i = 0;
+ int err;
+
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==ZIP_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int zip64local_getLong OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong *pX));
+
+local int zip64local_getLong (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, uLong* pX)
+{
+ uLong x ;
+ int i = 0;
+ int err;
+
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<16;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<24;
+
+ if (err==ZIP_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int zip64local_getLong64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX));
+
+
+local int zip64local_getLong64 (const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream, ZPOS64_T *pX)
+{
+ ZPOS64_T x;
+ int i = 0;
+ int err;
+
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (ZPOS64_T)i;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<8;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<16;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<24;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<32;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<40;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<48;
+
+ if (err==ZIP_OK)
+ err = zip64local_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((ZPOS64_T)i)<<56;
+
+ if (err==ZIP_OK)
+ *pX = x;
+ else
+ *pX = 0;
+
+ return err;
+}
+
+#ifndef BUFREADCOMMENT
+#define BUFREADCOMMENT (0x400)
+#endif
+/*
+ Locate the Central directory of a zipfile (at the end, just before
+ the global comment)
+*/
+local ZPOS64_T zip64local_SearchCentralDir OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
+
+local ZPOS64_T zip64local_SearchCentralDir(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
+{
+ unsigned char* buf;
+ ZPOS64_T uSizeFile;
+ ZPOS64_T uBackRead;
+ ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
+ ZPOS64_T uPosFound=0;
+
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+
+ uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize;
+ ZPOS64_T uReadPos ;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos);
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
+ ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+ TRYFREE(buf);
+ return uPosFound;
+}
+
+/*
+Locate the End of Zip64 Central directory locator and from there find the CD of a zipfile (at the end, just before
+the global comment)
+*/
+local ZPOS64_T zip64local_SearchCentralDir64 OF((const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream));
+
+local ZPOS64_T zip64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib_filefunc_def, voidpf filestream)
+{
+ unsigned char* buf;
+ ZPOS64_T uSizeFile;
+ ZPOS64_T uBackRead;
+ ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
+ ZPOS64_T uPosFound=0;
+ uLong uL;
+ ZPOS64_T relativeOffset;
+
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+ uSizeFile = ZTELL64(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize;
+ ZPOS64_T uReadPos;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uLong)(uSizeFile-uReadPos);
+ if (ZSEEK64(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD64(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ {
+ // Signature "0x07064b50" Zip64 end of central directory locater
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x06) && ((*(buf+i+3))==0x07))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+
+ TRYFREE(buf);
+ if (uPosFound == 0)
+ return 0;
+
+ /* Zip64 end of central directory locator */
+ if (ZSEEK64(*pzlib_filefunc_def,filestream, uPosFound,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return 0;
+
+ /* the signature, already checked */
+ if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK)
+ return 0;
+
+ /* number of the disk with the start of the zip64 end of central directory */
+ if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK)
+ return 0;
+ if (uL != 0)
+ return 0;
+
+ /* relative offset of the zip64 end of central directory record */
+ if (zip64local_getLong64(pzlib_filefunc_def,filestream,&relativeOffset)!=ZIP_OK)
+ return 0;
+
+ /* total number of disks */
+ if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK)
+ return 0;
+ if (uL != 1)
+ return 0;
+
+ /* Goto Zip64 end of central directory record */
+ if (ZSEEK64(*pzlib_filefunc_def,filestream, relativeOffset,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return 0;
+
+ /* the signature */
+ if (zip64local_getLong(pzlib_filefunc_def,filestream,&uL)!=ZIP_OK)
+ return 0;
+
+ if (uL != 0x06064b50) // signature of 'Zip64 end of central directory'
+ return 0;
+
+ return relativeOffset;
+}
+
+int LoadCentralDirectoryRecord(zip64_internal* pziinit)
+{
+ int err=ZIP_OK;
+ ZPOS64_T byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+
+ ZPOS64_T size_central_dir; /* size of the central directory */
+ ZPOS64_T offset_central_dir; /* offset of start of central directory */
+ ZPOS64_T central_pos;
+ uLong uL;
+
+ uLong number_disk; /* number of the current dist, used for
+ spaning ZIP, unsupported, always 0*/
+ uLong number_disk_with_CD; /* number the the disk with central dir, used
+ for spaning ZIP, unsupported, always 0*/
+ ZPOS64_T number_entry;
+ ZPOS64_T number_entry_CD; /* total number of entries in
+ the central dir
+ (same than number_entry on nospan) */
+ uLong VersionMadeBy;
+ uLong VersionNeeded;
+ uLong size_comment;
+
+ int hasZIP64Record = 0;
+
+ // check first if we find a ZIP64 record
+ central_pos = zip64local_SearchCentralDir64(&pziinit->z_filefunc,pziinit->filestream);
+ if(central_pos > 0)
+ {
+ hasZIP64Record = 1;
+ }
+ else if(central_pos == 0)
+ {
+ central_pos = zip64local_SearchCentralDir(&pziinit->z_filefunc,pziinit->filestream);
+ }
+
+/* disable to allow appending to empty ZIP archive
+ if (central_pos==0)
+ err=ZIP_ERRNO;
+*/
+
+ if(hasZIP64Record)
+ {
+ ZPOS64_T sizeEndOfCentralDirectory;
+ if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos, ZLIB_FILEFUNC_SEEK_SET) != 0)
+ err=ZIP_ERRNO;
+
+ /* the signature, already checked */
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* size of zip64 end of central directory record */
+ if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &sizeEndOfCentralDirectory)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* version made by */
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionMadeBy)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* version needed to extract */
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &VersionNeeded)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of this disk */
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* total number of entries in the central directory on this disk */
+ if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream, &number_entry)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* total number of entries in the central directory */
+ if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&number_entry_CD)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0))
+ err=ZIP_BADZIPFILE;
+
+ /* size of the central directory */
+ if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&size_central_dir)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* offset of start of central directory with respect to the
+ starting disk number */
+ if (zip64local_getLong64(&pziinit->z_filefunc, pziinit->filestream,&offset_central_dir)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ // TODO..
+ // read the comment from the standard central header.
+ size_comment = 0;
+ }
+ else
+ {
+ // Read End of central Directory info
+ if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=ZIP_ERRNO;
+
+ /* the signature, already checked */
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream,&uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of this disk */
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream,&number_disk_with_CD)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* total number of entries in the central dir on this disk */
+ number_entry = 0;
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+ else
+ number_entry = uL;
+
+ /* total number of entries in the central dir */
+ number_entry_CD = 0;
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+ else
+ number_entry_CD = uL;
+
+ if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0))
+ err=ZIP_BADZIPFILE;
+
+ /* size of the central directory */
+ size_central_dir = 0;
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+ else
+ size_central_dir = uL;
+
+ /* offset of start of central directory with respect to the starting disk number */
+ offset_central_dir = 0;
+ if (zip64local_getLong(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+ else
+ offset_central_dir = uL;
+
+
+ /* zipfile global comment length */
+ if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &size_comment)!=ZIP_OK)
+ err=ZIP_ERRNO;
+ }
+
+ if ((central_pos<offset_central_dir+size_central_dir) &&
+ (err==ZIP_OK))
+ err=ZIP_BADZIPFILE;
+
+ if (err!=ZIP_OK)
+ {
+ ZCLOSE64(pziinit->z_filefunc, pziinit->filestream);
+ return ZIP_ERRNO;
+ }
+
+ if (size_comment>0)
+ {
+ pziinit->globalcomment = (char*)ALLOC(size_comment+1);
+ if (pziinit->globalcomment)
+ {
+ size_comment = ZREAD64(pziinit->z_filefunc, pziinit->filestream, pziinit->globalcomment,size_comment);
+ pziinit->globalcomment[size_comment]=0;
+ }
+ }
+
+ byte_before_the_zipfile = central_pos - (offset_central_dir+size_central_dir);
+ pziinit->add_position_when_writting_offset = byte_before_the_zipfile;
+
+ {
+ ZPOS64_T size_central_dir_to_read = size_central_dir;
+ size_t buf_size = SIZEDATA_INDATABLOCK;
+ void* buf_read = (void*)ALLOC(buf_size);
+ if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir + byte_before_the_zipfile, ZLIB_FILEFUNC_SEEK_SET) != 0)
+ err=ZIP_ERRNO;
+
+ while ((size_central_dir_to_read>0) && (err==ZIP_OK))
+ {
+ ZPOS64_T read_this = SIZEDATA_INDATABLOCK;
+ if (read_this > size_central_dir_to_read)
+ read_this = size_central_dir_to_read;
+
+ if (ZREAD64(pziinit->z_filefunc, pziinit->filestream,buf_read,(uLong)read_this) != read_this)
+ err=ZIP_ERRNO;
+
+ if (err==ZIP_OK)
+ err = add_data_in_datablock(&pziinit->central_dir,buf_read, (uLong)read_this);
+
+ size_central_dir_to_read-=read_this;
+ }
+ TRYFREE(buf_read);
+ }
+ pziinit->begin_pos = byte_before_the_zipfile;
+ pziinit->number_entry = number_entry_CD;
+
+ if (ZSEEK64(pziinit->z_filefunc, pziinit->filestream, offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET) != 0)
+ err=ZIP_ERRNO;
+
+ return err;
+}
+
+
+#endif /* !NO_ADDFILEINEXISTINGZIP*/
+
+
+/************************************************************/
+extern zipFile ZEXPORT zipOpen3 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_32_def* pzlib_filefunc64_32_def)
+{
+ zip64_internal ziinit;
+ zip64_internal* zi;
+ int err=ZIP_OK;
+
+ ziinit.z_filefunc.zseek32_file = NULL;
+ ziinit.z_filefunc.ztell32_file = NULL;
+ if (pzlib_filefunc64_32_def==NULL)
+ fill_fopen64_filefunc(&ziinit.z_filefunc.zfile_func64);
+ else
+ ziinit.z_filefunc = *pzlib_filefunc64_32_def;
+
+ ziinit.filestream = ZOPEN64(ziinit.z_filefunc,
+ pathname,
+ (append == APPEND_STATUS_CREATE) ?
+ (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) :
+ (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING));
+
+ if (ziinit.filestream == NULL)
+ return NULL;
+
+ if (append == APPEND_STATUS_CREATEAFTER)
+ ZSEEK64(ziinit.z_filefunc,ziinit.filestream,0,SEEK_END);
+
+ ziinit.begin_pos = ZTELL64(ziinit.z_filefunc,ziinit.filestream);
+ ziinit.in_opened_file_inzip = 0;
+ ziinit.ci.stream_initialised = 0;
+ ziinit.number_entry = 0;
+ ziinit.add_position_when_writting_offset = 0;
+ init_linkedlist(&(ziinit.central_dir));
+
+
+
+ zi = (zip64_internal*)ALLOC(sizeof(zip64_internal));
+ if (zi==NULL)
+ {
+ ZCLOSE64(ziinit.z_filefunc,ziinit.filestream);
+ return NULL;
+ }
+
+ /* now we add file in a zipfile */
+# ifndef NO_ADDFILEINEXISTINGZIP
+ ziinit.globalcomment = NULL;
+ if (append == APPEND_STATUS_ADDINZIP)
+ {
+ // Read and Cache Central Directory Records
+ err = LoadCentralDirectoryRecord(&ziinit);
+ }
+
+ if (globalcomment)
+ {
+ *globalcomment = ziinit.globalcomment;
+ }
+# endif /* !NO_ADDFILEINEXISTINGZIP*/
+
+ if (err != ZIP_OK)
+ {
+# ifndef NO_ADDFILEINEXISTINGZIP
+ TRYFREE(ziinit.globalcomment);
+# endif /* !NO_ADDFILEINEXISTINGZIP*/
+ TRYFREE(zi);
+ return NULL;
+ }
+ else
+ {
+ *zi = ziinit;
+ return (zipFile)zi;
+ }
+}
+
+extern zipFile ZEXPORT zipOpen2 (const char *pathname, int append, zipcharpc* globalcomment, zlib_filefunc_def* pzlib_filefunc32_def)
+{
+ if (pzlib_filefunc32_def != NULL)
+ {
+ zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
+ fill_zlib_filefunc64_32_def_from_filefunc32(&zlib_filefunc64_32_def_fill,pzlib_filefunc32_def);
+ return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill);
+ }
+ else
+ return zipOpen3(pathname, append, globalcomment, NULL);
+}
+
+extern zipFile ZEXPORT zipOpen2_64 (const void *pathname, int append, zipcharpc* globalcomment, zlib_filefunc64_def* pzlib_filefunc_def)
+{
+ if (pzlib_filefunc_def != NULL)
+ {
+ zlib_filefunc64_32_def zlib_filefunc64_32_def_fill;
+ zlib_filefunc64_32_def_fill.zfile_func64 = *pzlib_filefunc_def;
+ zlib_filefunc64_32_def_fill.ztell32_file = NULL;
+ zlib_filefunc64_32_def_fill.zseek32_file = NULL;
+ return zipOpen3(pathname, append, globalcomment, &zlib_filefunc64_32_def_fill);
+ }
+ else
+ return zipOpen3(pathname, append, globalcomment, NULL);
+}
+
+
+
+extern zipFile ZEXPORT zipOpen (const char* pathname, int append)
+{
+ return zipOpen3((const void*)pathname,append,NULL,NULL);
+}
+
+extern zipFile ZEXPORT zipOpen64 (const void* pathname, int append)
+{
+ return zipOpen3(pathname,append,NULL,NULL);
+}
+
+int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_extrafield_local, const void* extrafield_local)
+{
+ /* write the local header */
+ int err;
+ uInt size_filename = (uInt)strlen(filename);
+ uInt size_extrafield = size_extrafield_local;
+
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC, 4);
+
+ if (err==ZIP_OK)
+ {
+ if(zi->ci.zip64)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);/* version needed to extract */
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */
+ }
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2);
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2);
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4);
+
+ // CRC / Compressed size / Uncompressed size will be filled in later and rewritten later
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */
+ if (err==ZIP_OK)
+ {
+ if(zi->ci.zip64)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* compressed size, unknown */
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */
+ }
+ if (err==ZIP_OK)
+ {
+ if(zi->ci.zip64)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xFFFFFFFF,4); /* uncompressed size, unknown */
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */
+ }
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2);
+
+ if(zi->ci.zip64)
+ {
+ size_extrafield += 20;
+ }
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield,2);
+
+ if ((err==ZIP_OK) && (size_filename > 0))
+ {
+ if (ZWRITE64(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename)
+ err = ZIP_ERRNO;
+ }
+
+ if ((err==ZIP_OK) && (size_extrafield_local > 0))
+ {
+ if (ZWRITE64(zi->z_filefunc, zi->filestream, extrafield_local, size_extrafield_local) != size_extrafield_local)
+ err = ZIP_ERRNO;
+ }
+
+
+ if ((err==ZIP_OK) && (zi->ci.zip64))
+ {
+ // write the Zip64 extended info
+ short HeaderID = 1;
+ short DataSize = 16;
+ ZPOS64_T CompressedSize = 0;
+ ZPOS64_T UncompressedSize = 0;
+
+ // Remember position of Zip64 extended info for the local file header. (needed when we update size after done with file)
+ zi->ci.pos_zip64extrainfo = ZTELL64(zi->z_filefunc,zi->filestream);
+
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)HeaderID,2);
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)DataSize,2);
+
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8);
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8);
+ }
+
+ return err;
+}
+
+/*
+ NOTE.
+ When writing RAW the ZIP64 extended information in extrafield_local and extrafield_global needs to be stripped
+ before calling this function it can be done with zipRemoveExtraInfoBlock
+
+ It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize
+ unnecessary allocations.
+ */
+extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw,
+ int windowBits,int memLevel, int strategy,
+ const char* password, uLong crcForCrypting,
+ uLong versionMadeBy, uLong flagBase, int zip64)
+{
+ zip64_internal* zi;
+ uInt size_filename;
+ uInt size_comment;
+ uInt i;
+ int err = ZIP_OK;
+
+# ifdef NOCRYPT
+ (crcForCrypting);
+ if (password != NULL)
+ return ZIP_PARAMERROR;
+# endif
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+
+#ifdef HAVE_BZIP2
+ if ((method!=0) && (method!=Z_DEFLATED) && (method!=Z_BZIP2ED))
+ return ZIP_PARAMERROR;
+#else
+ if ((method!=0) && (method!=Z_DEFLATED))
+ return ZIP_PARAMERROR;
+#endif
+
+ zi = (zip64_internal*)file;
+
+ if (zi->in_opened_file_inzip == 1)
+ {
+ err = zipCloseFileInZip (file);
+ if (err != ZIP_OK)
+ return err;
+ }
+
+ if (filename==NULL)
+ filename="-";
+
+ if (comment==NULL)
+ size_comment = 0;
+ else
+ size_comment = (uInt)strlen(comment);
+
+ size_filename = (uInt)strlen(filename);
+
+ if (zipfi == NULL)
+ zi->ci.dosDate = 0;
+ else
+ {
+ if (zipfi->dosDate != 0)
+ zi->ci.dosDate = zipfi->dosDate;
+ else
+ zi->ci.dosDate = zip64local_TmzDateToDosDate(&zipfi->tmz_date);
+ }
+
+ zi->ci.flag = flagBase;
+ if ((level==8) || (level==9))
+ zi->ci.flag |= 2;
+ if (level==2)
+ zi->ci.flag |= 4;
+ if (level==1)
+ zi->ci.flag |= 6;
+ if (password != NULL)
+ zi->ci.flag |= 1;
+
+ zi->ci.crc32 = 0;
+ zi->ci.method = method;
+ zi->ci.encrypt = 0;
+ zi->ci.stream_initialised = 0;
+ zi->ci.pos_in_buffered_data = 0;
+ zi->ci.raw = raw;
+ zi->ci.pos_local_header = ZTELL64(zi->z_filefunc,zi->filestream);
+
+ zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + size_extrafield_global + size_comment;
+ zi->ci.size_centralExtraFree = 32; // Extra space we have reserved in case we need to add ZIP64 extra info data
+
+ zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader + zi->ci.size_centralExtraFree);
+
+ zi->ci.size_centralExtra = size_extrafield_global;
+ zip64local_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
+ /* version info */
+ zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)versionMadeBy,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+ zip64local_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+ zip64local_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+ zip64local_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+ zip64local_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+ zip64local_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
+
+ if (zipfi==NULL)
+ zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2);
+ else
+ zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2);
+
+ if (zipfi==NULL)
+ zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4);
+ else
+ zip64local_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
+
+ if(zi->ci.pos_local_header >= 0xffffffff)
+ zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)0xffffffff,4);
+ else
+ zip64local_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header - zi->add_position_when_writting_offset,4);
+
+ for (i=0;i<size_filename;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
+
+ for (i=0;i<size_extrafield_global;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
+ *(((const char*)extrafield_global)+i);
+
+ for (i=0;i<size_comment;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
+ size_extrafield_global+i) = *(comment+i);
+ if (zi->ci.central_header == NULL)
+ return ZIP_INTERNALERROR;
+
+ zi->ci.zip64 = zip64;
+ zi->ci.totalCompressedData = 0;
+ zi->ci.totalUncompressedData = 0;
+ zi->ci.pos_zip64extrainfo = 0;
+
+ err = Write_LocalFileHeader(zi, filename, size_extrafield_local, extrafield_local);
+
+#ifdef HAVE_BZIP2
+ zi->ci.bstream.avail_in = (uInt)0;
+ zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.bstream.next_out = (char*)zi->ci.buffered_data;
+ zi->ci.bstream.total_in_hi32 = 0;
+ zi->ci.bstream.total_in_lo32 = 0;
+ zi->ci.bstream.total_out_hi32 = 0;
+ zi->ci.bstream.total_out_lo32 = 0;
+#endif
+
+ zi->ci.stream.avail_in = (uInt)0;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ zi->ci.stream.total_in = 0;
+ zi->ci.stream.total_out = 0;
+ zi->ci.stream.data_type = Z_BINARY;
+
+#ifdef HAVE_BZIP2
+ if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED || zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
+#else
+ if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+#endif
+ {
+ if(zi->ci.method == Z_DEFLATED)
+ {
+ zi->ci.stream.zalloc = (alloc_func)0;
+ zi->ci.stream.zfree = (free_func)0;
+ zi->ci.stream.opaque = (voidpf)0;
+
+ if (windowBits>0)
+ windowBits = -windowBits;
+
+ err = deflateInit2(&zi->ci.stream, level, Z_DEFLATED, windowBits, memLevel, strategy);
+
+ if (err==Z_OK)
+ zi->ci.stream_initialised = Z_DEFLATED;
+ }
+ else if(zi->ci.method == Z_BZIP2ED)
+ {
+#ifdef HAVE_BZIP2
+ // Init BZip stuff here
+ zi->ci.bstream.bzalloc = 0;
+ zi->ci.bstream.bzfree = 0;
+ zi->ci.bstream.opaque = (voidpf)0;
+
+ err = BZ2_bzCompressInit(&zi->ci.bstream, level, 0,35);
+ if(err == BZ_OK)
+ zi->ci.stream_initialised = Z_BZIP2ED;
+#endif
+ }
+
+ }
+
+# ifndef NOCRYPT
+ zi->ci.crypt_header_size = 0;
+ if ((err==Z_OK) && (password != NULL))
+ {
+ unsigned char bufHead[RAND_HEAD_LEN];
+ unsigned int sizeHead;
+ zi->ci.encrypt = 1;
+ zi->ci.pcrc_32_tab = get_crc_table();
+ /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/
+
+ sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting);
+ zi->ci.crypt_header_size = sizeHead;
+
+ if (ZWRITE64(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead)
+ err = ZIP_ERRNO;
+ }
+# endif
+
+ if (err==Z_OK)
+ zi->in_opened_file_inzip = 1;
+ return err;
+}
+
+extern int ZEXPORT zipOpenNewFileInZip4 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw,
+ int windowBits,int memLevel, int strategy,
+ const char* password, uLong crcForCrypting,
+ uLong versionMadeBy, uLong flagBase)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ windowBits, memLevel, strategy,
+ password, crcForCrypting, versionMadeBy, flagBase, 0);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip3 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw,
+ int windowBits,int memLevel, int strategy,
+ const char* password, uLong crcForCrypting)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ windowBits, memLevel, strategy,
+ password, crcForCrypting, VERSIONMADEBY, 0, 0);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw,
+ int windowBits,int memLevel, int strategy,
+ const char* password, uLong crcForCrypting, int zip64)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ windowBits, memLevel, strategy,
+ password, crcForCrypting, VERSIONMADEBY, 0, zip64);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ NULL, 0, VERSIONMADEBY, 0, 0);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip2_64(zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void* extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int raw, int zip64)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ NULL, 0, VERSIONMADEBY, 0, zip64);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip64 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void*extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level, int zip64)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, 0,
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ NULL, 0, VERSIONMADEBY, 0, zip64);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip (zipFile file, const char* filename, const zip_fileinfo* zipfi,
+ const void* extrafield_local, uInt size_extrafield_local,
+ const void*extrafield_global, uInt size_extrafield_global,
+ const char* comment, int method, int level)
+{
+ return zipOpenNewFileInZip4_64 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, 0,
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ NULL, 0, VERSIONMADEBY, 0, 0);
+}
+
+local int zip64FlushWriteBuffer(zip64_internal* zi)
+{
+ int err=ZIP_OK;
+
+ if (zi->ci.encrypt != 0)
+ {
+#ifndef NOCRYPT
+ uInt i;
+ int t;
+ for (i=0;i<zi->ci.pos_in_buffered_data;i++)
+ zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab, zi->ci.buffered_data[i],t);
+#endif
+ }
+
+ if (ZWRITE64(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data) != zi->ci.pos_in_buffered_data)
+ err = ZIP_ERRNO;
+
+ zi->ci.totalCompressedData += zi->ci.pos_in_buffered_data;
+
+#ifdef HAVE_BZIP2
+ if(zi->ci.method == Z_BZIP2ED)
+ {
+ zi->ci.totalUncompressedData += zi->ci.bstream.total_in_lo32;
+ zi->ci.bstream.total_in_lo32 = 0;
+ zi->ci.bstream.total_in_hi32 = 0;
+ }
+ else
+#endif
+ {
+ zi->ci.totalUncompressedData += zi->ci.stream.total_in;
+ zi->ci.stream.total_in = 0;
+ }
+
+
+ zi->ci.pos_in_buffered_data = 0;
+
+ return err;
+}
+
+extern int ZEXPORT zipWriteInFileInZip (zipFile file,const void* buf,unsigned int len)
+{
+ zip64_internal* zi;
+ int err=ZIP_OK;
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ zi = (zip64_internal*)file;
+
+ if (zi->in_opened_file_inzip == 0)
+ return ZIP_PARAMERROR;
+
+ zi->ci.crc32 = crc32(zi->ci.crc32,buf,(uInt)len);
+
+#ifdef HAVE_BZIP2
+ if(zi->ci.method == Z_BZIP2ED && (!zi->ci.raw))
+ {
+ zi->ci.bstream.next_in = (void*)buf;
+ zi->ci.bstream.avail_in = len;
+ err = BZ_RUN_OK;
+
+ while ((err==BZ_RUN_OK) && (zi->ci.bstream.avail_in>0))
+ {
+ if (zi->ci.bstream.avail_out == 0)
+ {
+ if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.bstream.next_out = (char*)zi->ci.buffered_data;
+ }
+
+
+ if(err != BZ_RUN_OK)
+ break;
+
+ if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
+ {
+ uLong uTotalOutBefore_lo = zi->ci.bstream.total_out_lo32;
+// uLong uTotalOutBefore_hi = zi->ci.bstream.total_out_hi32;
+ err=BZ2_bzCompress(&zi->ci.bstream, BZ_RUN);
+
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore_lo) ;
+ }
+ }
+
+ if(err == BZ_RUN_OK)
+ err = ZIP_OK;
+ }
+ else
+#endif
+ {
+ zi->ci.stream.next_in = (Bytef*)buf;
+ zi->ci.stream.avail_in = len;
+
+ while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
+ {
+ if (zi->ci.stream.avail_out == 0)
+ {
+ if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ }
+
+
+ if(err != ZIP_OK)
+ break;
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ uLong uTotalOutBefore = zi->ci.stream.total_out;
+ err=deflate(&zi->ci.stream, Z_NO_FLUSH);
+ if(uTotalOutBefore > zi->ci.stream.total_out)
+ {
+ int bBreak = 0;
+ bBreak++;
+ }
+
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+ }
+ else
+ {
+ uInt copy_this,i;
+ if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
+ copy_this = zi->ci.stream.avail_in;
+ else
+ copy_this = zi->ci.stream.avail_out;
+
+ for (i = 0; i < copy_this; i++)
+ *(((char*)zi->ci.stream.next_out)+i) =
+ *(((const char*)zi->ci.stream.next_in)+i);
+ {
+ zi->ci.stream.avail_in -= copy_this;
+ zi->ci.stream.avail_out-= copy_this;
+ zi->ci.stream.next_in+= copy_this;
+ zi->ci.stream.next_out+= copy_this;
+ zi->ci.stream.total_in+= copy_this;
+ zi->ci.stream.total_out+= copy_this;
+ zi->ci.pos_in_buffered_data += copy_this;
+ }
+ }
+ }// while(...)
+ }
+
+ return err;
+}
+
+extern int ZEXPORT zipCloseFileInZipRaw (zipFile file, uLong uncompressed_size, uLong crc32)
+{
+ return zipCloseFileInZipRaw64 (file, uncompressed_size, crc32);
+}
+
+extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_size, uLong crc32)
+{
+ zip64_internal* zi;
+ ZPOS64_T compressed_size;
+ uLong invalidValue = 0xffffffff;
+ short datasize = 0;
+ int err=ZIP_OK;
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ zi = (zip64_internal*)file;
+
+ if (zi->in_opened_file_inzip == 0)
+ return ZIP_PARAMERROR;
+ zi->ci.stream.avail_in = 0;
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ while (err==ZIP_OK)
+ {
+ uLong uTotalOutBefore;
+ if (zi->ci.stream.avail_out == 0)
+ {
+ if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ }
+ uTotalOutBefore = zi->ci.stream.total_out;
+ err=deflate(&zi->ci.stream, Z_FINISH);
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+ }
+ }
+ else if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
+ {
+#ifdef HAVE_BZIP2
+ err = BZ_FINISH_OK;
+ while (err==BZ_FINISH_OK)
+ {
+ uLong uTotalOutBefore;
+ if (zi->ci.bstream.avail_out == 0)
+ {
+ if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.bstream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.bstream.next_out = (char*)zi->ci.buffered_data;
+ }
+ uTotalOutBefore = zi->ci.bstream.total_out_lo32;
+ err=BZ2_bzCompress(&zi->ci.bstream, BZ_FINISH);
+ if(err == BZ_STREAM_END)
+ err = Z_STREAM_END;
+
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.bstream.total_out_lo32 - uTotalOutBefore);
+ }
+
+ if(err == BZ_FINISH_OK)
+ err = ZIP_OK;
+#endif
+ }
+
+ if (err==Z_STREAM_END)
+ err=ZIP_OK; /* this is normal */
+
+ if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
+ {
+ if (zip64FlushWriteBuffer(zi)==ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ }
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ int tmp_err = deflateEnd(&zi->ci.stream);
+ if (err == ZIP_OK)
+ err = tmp_err;
+ zi->ci.stream_initialised = 0;
+ }
+#ifdef HAVE_BZIP2
+ else if((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
+ {
+ int tmperr = BZ2_bzCompressEnd(&zi->ci.bstream);
+ if (err==ZIP_OK)
+ err = tmperr;
+ zi->ci.stream_initialised = 0;
+ }
+#endif
+
+ if (!zi->ci.raw)
+ {
+ crc32 = (uLong)zi->ci.crc32;
+ uncompressed_size = zi->ci.totalUncompressedData;
+ }
+ compressed_size = zi->ci.totalCompressedData;
+
+# ifndef NOCRYPT
+ compressed_size += zi->ci.crypt_header_size;
+# endif
+
+ // update Current Item crc and sizes,
+ if(compressed_size >= 0xffffffff || uncompressed_size >= 0xffffffff || zi->ci.pos_local_header >= 0xffffffff)
+ {
+ /*version Made by*/
+ zip64local_putValue_inmemory(zi->ci.central_header+4,(uLong)45,2);
+ /*version needed*/
+ zip64local_putValue_inmemory(zi->ci.central_header+6,(uLong)45,2);
+
+ }
+
+ zip64local_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/
+
+
+ if(compressed_size >= 0xffffffff)
+ zip64local_putValue_inmemory(zi->ci.central_header+20, invalidValue,4); /*compr size*/
+ else
+ zip64local_putValue_inmemory(zi->ci.central_header+20, compressed_size,4); /*compr size*/
+
+ /// set internal file attributes field
+ if (zi->ci.stream.data_type == Z_ASCII)
+ zip64local_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2);
+
+ if(uncompressed_size >= 0xffffffff)
+ zip64local_putValue_inmemory(zi->ci.central_header+24, invalidValue,4); /*uncompr size*/
+ else
+ zip64local_putValue_inmemory(zi->ci.central_header+24, uncompressed_size,4); /*uncompr size*/
+
+ // Add ZIP64 extra info field for uncompressed size
+ if(uncompressed_size >= 0xffffffff)
+ datasize += 8;
+
+ // Add ZIP64 extra info field for compressed size
+ if(compressed_size >= 0xffffffff)
+ datasize += 8;
+
+ // Add ZIP64 extra info field for relative offset to local file header of current file
+ if(zi->ci.pos_local_header >= 0xffffffff)
+ datasize += 8;
+
+ if(datasize > 0)
+ {
+ char* p = NULL;
+
+ if((uLong)(datasize + 4) > zi->ci.size_centralExtraFree)
+ {
+ // we can not write more data to the buffer that we have room for.
+ return ZIP_BADZIPFILE;
+ }
+
+ p = zi->ci.central_header + zi->ci.size_centralheader;
+
+ // Add Extra Information Header for 'ZIP64 information'
+ zip64local_putValue_inmemory(p, 0x0001, 2); // HeaderID
+ p += 2;
+ zip64local_putValue_inmemory(p, datasize, 2); // DataSize
+ p += 2;
+
+ if(uncompressed_size >= 0xffffffff)
+ {
+ zip64local_putValue_inmemory(p, uncompressed_size, 8);
+ p += 8;
+ }
+
+ if(compressed_size >= 0xffffffff)
+ {
+ zip64local_putValue_inmemory(p, compressed_size, 8);
+ p += 8;
+ }
+
+ if(zi->ci.pos_local_header >= 0xffffffff)
+ {
+ zip64local_putValue_inmemory(p, zi->ci.pos_local_header, 8);
+ p += 8;
+ }
+
+ // Update how much extra free space we got in the memory buffer
+ // and increase the centralheader size so the new ZIP64 fields are included
+ // ( 4 below is the size of HeaderID and DataSize field )
+ zi->ci.size_centralExtraFree -= datasize + 4;
+ zi->ci.size_centralheader += datasize + 4;
+
+ // Update the extra info size field
+ zi->ci.size_centralExtra += datasize + 4;
+ zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)zi->ci.size_centralExtra,2);
+ }
+
+ if (err==ZIP_OK)
+ err = add_data_in_datablock(&zi->central_dir, zi->ci.central_header, (uLong)zi->ci.size_centralheader);
+
+ free(zi->ci.central_header);
+
+ if (err==ZIP_OK)
+ {
+ // Update the LocalFileHeader with the new values.
+
+ ZPOS64_T cur_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream);
+
+ if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err = ZIP_ERRNO;
+
+ if (err==ZIP_OK)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */
+
+ if(uncompressed_size >= 0xffffffff || compressed_size >= 0xffffffff )
+ {
+ if(zi->ci.pos_zip64extrainfo > 0)
+ {
+ // Update the size in the ZIP64 extended field.
+ if (ZSEEK64(zi->z_filefunc,zi->filestream, zi->ci.pos_zip64extrainfo + 4,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err = ZIP_ERRNO;
+
+ if (err==ZIP_OK) /* compressed size, unknown */
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, uncompressed_size, 8);
+
+ if (err==ZIP_OK) /* uncompressed size, unknown */
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, compressed_size, 8);
+ }
+ else
+ err = ZIP_BADZIPFILE; // Caller passed zip64 = 0, so no room for zip64 info -> fatal
+ }
+ else
+ {
+ if (err==ZIP_OK) /* compressed size, unknown */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4);
+
+ if (err==ZIP_OK) /* uncompressed size, unknown */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4);
+ }
+
+ if (ZSEEK64(zi->z_filefunc,zi->filestream, cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err = ZIP_ERRNO;
+ }
+
+ zi->number_entry ++;
+ zi->in_opened_file_inzip = 0;
+
+ return err;
+}
+
+extern int ZEXPORT zipCloseFileInZip (zipFile file)
+{
+ return zipCloseFileInZipRaw (file,0,0);
+}
+
+int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eocd_pos_inzip)
+{
+ int err = ZIP_OK;
+ ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writting_offset;
+
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4);
+
+ /*num disks*/
+ if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4);
+
+ /*relative offset*/
+ if (err==ZIP_OK) /* Relative offset to the Zip64EndOfCentralDirectory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream, pos,8);
+
+ /*total disks*/ /* Do not support spawning of disk so always say 1 here*/
+ if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)1,4);
+
+ return err;
+}
+
+int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
+{
+ int err = ZIP_OK;
+
+ uLong Zip64DataSize = 44;
+
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDHEADERMAGIC,4);
+
+ if (err==ZIP_OK) /* size of this 'zip64 end of central directory' */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)Zip64DataSize,8); // why ZPOS64_T of this ?
+
+ if (err==ZIP_OK) /* version made by */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);
+
+ if (err==ZIP_OK) /* version needed */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)45,2);
+
+ if (err==ZIP_OK) /* number of this disk */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4);
+
+ if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4);
+
+ if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8);
+
+ if (err==ZIP_OK) /* total number of entries in the central dir */
+ err = zip64local_putValue(&zi->z_filefunc, zi->filestream, zi->number_entry, 8);
+
+ if (err==ZIP_OK) /* size of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(ZPOS64_T)size_centraldir,8);
+
+ if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */
+ {
+ ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset;
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8);
+ }
+ return err;
+}
+int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
+{
+ int err = ZIP_OK;
+
+ /*signature*/
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4);
+
+ if (err==ZIP_OK) /* number of this disk */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
+
+ if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
+
+ if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+ {
+ {
+ if(zi->number_entry >= 0xFFFF)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
+ }
+ }
+
+ if (err==ZIP_OK) /* total number of entries in the central dir */
+ {
+ if(zi->number_entry >= 0xFFFF)
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0xffff,2); // use value in ZIP64 record
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
+ }
+
+ if (err==ZIP_OK) /* size of the central directory */
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4);
+
+ if (err==ZIP_OK) /* offset of start of central directory with respect to the starting disk number */
+ {
+ ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset;
+ if(pos >= 0xffffffff)
+ {
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4);
+ }
+ else
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
+ }
+
+ return err;
+}
+
+int Write_GlobalComment(zip64_internal* zi, const char* global_comment)
+{
+ int err = ZIP_OK;
+ uInt size_global_comment = 0;
+
+ if(global_comment != NULL)
+ size_global_comment = (uInt)strlen(global_comment);
+
+ err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2);
+
+ if (err == ZIP_OK && size_global_comment > 0)
+ {
+ if (ZWRITE64(zi->z_filefunc,zi->filestream, global_comment, size_global_comment) != size_global_comment)
+ err = ZIP_ERRNO;
+ }
+ return err;
+}
+
+extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
+{
+ zip64_internal* zi;
+ int err = 0;
+ uLong size_centraldir = 0;
+ ZPOS64_T centraldir_pos_inzip;
+ ZPOS64_T pos;
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+
+ zi = (zip64_internal*)file;
+
+ if (zi->in_opened_file_inzip == 1)
+ {
+ err = zipCloseFileInZip (file);
+ }
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+ if (global_comment==NULL)
+ global_comment = zi->globalcomment;
+#endif
+
+ centraldir_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream);
+
+ if (err==ZIP_OK)
+ {
+ linkedlist_datablock_internal* ldi = zi->central_dir.first_block;
+ while (ldi!=NULL)
+ {
+ if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
+ {
+ if (ZWRITE64(zi->z_filefunc,zi->filestream, ldi->data, ldi->filled_in_this_block) != ldi->filled_in_this_block)
+ err = ZIP_ERRNO;
+ }
+
+ size_centraldir += ldi->filled_in_this_block;
+ ldi = ldi->next_datablock;
+ }
+ }
+ free_linkedlist(&(zi->central_dir));
+
+ pos = centraldir_pos_inzip - zi->add_position_when_writting_offset;
+ if(pos >= 0xffffffff || zi->number_entry > 0xFFFF)
+ {
+ ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream);
+ Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip);
+
+ Write_Zip64EndOfCentralDirectoryLocator(zi, Zip64EOCDpos);
+ }
+
+ if (err==ZIP_OK)
+ err = Write_EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip);
+
+ if(err == ZIP_OK)
+ err = Write_GlobalComment(zi, global_comment);
+
+ if (ZCLOSE64(zi->z_filefunc,zi->filestream) != 0)
+ if (err == ZIP_OK)
+ err = ZIP_ERRNO;
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+ TRYFREE(zi->globalcomment);
+#endif
+ TRYFREE(zi);
+
+ return err;
+}
+
+extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHeader)
+{
+ char* p = pData;
+ int size = 0;
+ char* pNewHeader;
+ char* pTmp;
+ short header;
+ short dataSize;
+
+ int retVal = ZIP_OK;
+
+ if(pData == NULL || *dataLen < 4)
+ return ZIP_PARAMERROR;
+
+ pNewHeader = (char*)ALLOC(*dataLen);
+ pTmp = pNewHeader;
+
+ while(p < (pData + *dataLen))
+ {
+ header = *(short*)p;
+ dataSize = *(((short*)p)+1);
+
+ if( header == sHeader ) // Header found.
+ {
+ p += dataSize + 4; // skip it. do not copy to temp buffer
+ }
+ else
+ {
+ // Extra Info block should not be removed, So copy it to the temp buffer.
+ memcpy(pTmp, p, dataSize + 4);
+ p += dataSize + 4;
+ size += dataSize + 4;
+ }
+
+ }
+
+ if(size < *dataLen)
+ {
+ // clean old extra info block.
+ memset(pData,0, *dataLen);
+
+ // copy the new extra info block over the old
+ if(size > 0)
+ memcpy(pData, pNewHeader, size);
+
+ // set the new extra info size
+ *dataLen = size;
+
+ retVal = ZIP_OK;
+ }
+ else
+ retVal = ZIP_ERRNO;
+
+ TRYFREE(pNewHeader);
+
+ return retVal;
+}
--- /dev/null
+/* zip.h -- IO on .zip files using zlib
+ Version 1.1, February 14h, 2010
+ part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+ Modifications for Zip64 support
+ Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+ For more info read MiniZip_info.txt
+
+ ---------------------------------------------------------------------------
+
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ ---------------------------------------------------------------------------
+
+ Changes
+
+ See header of zip.h
+
+*/
+
+#ifndef _zip12_H
+#define _zip12_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//#define HAVE_BZIP2
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+ from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__;
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK (0)
+#define ZIP_EOF (0)
+#define ZIP_ERRNO (Z_ERRNO)
+#define ZIP_PARAMERROR (-102)
+#define ZIP_BADZIPFILE (-103)
+#define ZIP_INTERNALERROR (-104)
+
+#ifndef DEF_MEM_LEVEL
+# if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+# else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+# endif
+#endif
+/* default memLevel */
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s
+{
+ uInt tm_sec; /* seconds after the minute - [0,59] */
+ uInt tm_min; /* minutes after the hour - [0,59] */
+ uInt tm_hour; /* hours since midnight - [0,23] */
+ uInt tm_mday; /* day of the month - [1,31] */
+ uInt tm_mon; /* months since January - [0,11] */
+ uInt tm_year; /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+ tm_zip tmz_date; /* date in understandable format */
+ uLong dosDate; /* if dos_date == 0, tmu_date is used */
+/* uLong flag; */ /* general purpose bit flag 2 bytes */
+
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+} zip_fileinfo;
+
+typedef const char* zipcharpc;
+
+
+#define APPEND_STATUS_CREATE (0)
+#define APPEND_STATUS_CREATEAFTER (1)
+#define APPEND_STATUS_ADDINZIP (2)
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
+/*
+ Create a zipfile.
+ pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
+ an Unix computer "zlib/zlib113.zip".
+ if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
+ will be created at the end of the file.
+ (useful if the file contain a self extractor code)
+ if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
+ add files in existing zip (be sure you don't add file that doesn't exist)
+ If the zipfile cannot be opened, the return value is NULL.
+ Else, the return value is a zipFile Handle, usable with other function
+ of this zip package.
+*/
+
+/* Note : there is no delete function into a zipfile.
+ If you want delete file into a zipfile, you must open a zipfile, and create another
+ Of couse, you can use RAW reading and writing to copy the file you did not want delte
+*/
+
+extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
+ int append,
+ zipcharpc* globalcomment,
+ zlib_filefunc_def* pzlib_filefunc_def));
+
+extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
+ int append,
+ zipcharpc* globalcomment,
+ zlib_filefunc64_def* pzlib_filefunc_def));
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level));
+
+extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int zip64));
+
+/*
+ Open a file in the ZIP for writing.
+ filename : the filename in zip (if NULL, '-' without quote will be used
+ *zipfi contain supplemental information
+ if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+ contains the extrafield data the the local header
+ if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+ contains the extrafield data the the local header
+ if comment != NULL, comment contain the comment string
+ method contain the compression method (0 for store, Z_DEFLATED for deflate)
+ level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+ zip64 is set to 1 if a zip64 extended information block should be added to the local file header.
+ this MUST be '1' if the uncompressed size is >= 0xffffffff.
+
+*/
+
+
+extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw));
+
+
+extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int zip64));
+/*
+ Same than zipOpenNewFileInZip, except if raw=1, we write raw file
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int windowBits,
+ int memLevel,
+ int strategy,
+ const char* password,
+ uLong crcForCrypting));
+
+extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int windowBits,
+ int memLevel,
+ int strategy,
+ const char* password,
+ uLong crcForCrypting,
+ int zip64
+ ));
+
+/*
+ Same than zipOpenNewFileInZip2, except
+ windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
+ password : crypting password (NULL for no crypting)
+ crcForCrypting : crc of file to compress (needed for crypting)
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int windowBits,
+ int memLevel,
+ int strategy,
+ const char* password,
+ uLong crcForCrypting,
+ uLong versionMadeBy,
+ uLong flagBase
+ ));
+
+
+extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int windowBits,
+ int memLevel,
+ int strategy,
+ const char* password,
+ uLong crcForCrypting,
+ uLong versionMadeBy,
+ uLong flagBase,
+ int zip64
+ ));
+/*
+ Same than zipOpenNewFileInZip4, except
+ versionMadeBy : value for Version made by field
+ flag : value for flag field (compression level info will be added)
+ */
+
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+ const void* buf,
+ unsigned len));
+/*
+ Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+ Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
+ uLong uncompressed_size,
+ uLong crc32));
+
+extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
+ ZPOS64_T uncompressed_size,
+ uLong crc32));
+
+/*
+ Close the current file in the zipfile, for file opened with
+ parameter raw=1 in zipOpenNewFileInZip2
+ uncompressed_size and crc32 are value for the uncompressed size
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+ const char* global_comment));
+/*
+ Close the zipfile
+*/
+
+
+extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
+/*
+ zipRemoveExtraInfoBlock - Added by Mathias Svensson
+
+ Remove extra information block from a extra information data for the local file header or central directory header
+
+ It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode.
+
+ 0x0001 is the signature header for the ZIP64 extra information blocks
+
+ usage.
+ Remove ZIP64 Extra information from a central director extra field data
+ zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
+
+ Remove ZIP64 Extra information from a Local File Header extra field data
+ zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001);
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip64_H */
--- /dev/null
+(* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Pascal translation
+ * Copyright (C) 1998 by Jacques Nomssi Nzali.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *
+ * Adaptation to the zlibpas interface
+ * Copyright (C) 2003 by Cosmin Truta.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+program example;
+
+{$DEFINE TEST_COMPRESS}
+{DO NOT $DEFINE TEST_GZIO}
+{$DEFINE TEST_DEFLATE}
+{$DEFINE TEST_INFLATE}
+{$DEFINE TEST_FLUSH}
+{$DEFINE TEST_SYNC}
+{$DEFINE TEST_DICT}
+
+uses SysUtils, zlibpas;
+
+const TESTFILE = 'foo.gz';
+
+(* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ *)
+const hello: PChar = 'hello, hello!';
+
+const dictionary: PChar = 'hello';
+
+var dictId: LongInt; (* Adler32 value of the dictionary *)
+
+procedure CHECK_ERR(err: Integer; msg: String);
+begin
+ if err <> Z_OK then
+ begin
+ WriteLn(msg, ' error: ', err);
+ Halt(1);
+ end;
+end;
+
+procedure EXIT_ERR(const msg: String);
+begin
+ WriteLn('Error: ', msg);
+ Halt(1);
+end;
+
+(* ===========================================================================
+ * Test compress and uncompress
+ *)
+{$IFDEF TEST_COMPRESS}
+procedure test_compress(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ len: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ err := compress(compr, comprLen, hello, len);
+ CHECK_ERR(err, 'compress');
+
+ StrCopy(PChar(uncompr), 'garbage');
+
+ err := uncompress(uncompr, uncomprLen, compr, comprLen);
+ CHECK_ERR(err, 'uncompress');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad uncompress')
+ else
+ WriteLn('uncompress(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test read/write of .gz files
+ *)
+{$IFDEF TEST_GZIO}
+procedure test_gzio(const fname: PChar; (* compressed file name *)
+ uncompr: Pointer;
+ uncomprLen: LongInt);
+var err: Integer;
+ len: Integer;
+ zfile: gzFile;
+ pos: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ zfile := gzopen(fname, 'wb');
+ if zfile = NIL then
+ begin
+ WriteLn('gzopen error');
+ Halt(1);
+ end;
+ gzputc(zfile, 'h');
+ if gzputs(zfile, 'ello') <> 4 then
+ begin
+ WriteLn('gzputs err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$IFDEF GZ_FORMAT_STRING}
+ if gzprintf(zfile, ', %s!', 'hello') <> 8 then
+ begin
+ WriteLn('gzprintf err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$ELSE}
+ if gzputs(zfile, ', hello!') <> 8 then
+ begin
+ WriteLn('gzputs err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$ENDIF}
+ gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *)
+ gzclose(zfile);
+
+ zfile := gzopen(fname, 'rb');
+ if zfile = NIL then
+ begin
+ WriteLn('gzopen error');
+ Halt(1);
+ end;
+
+ StrCopy(PChar(uncompr), 'garbage');
+
+ if gzread(zfile, uncompr, uncomprLen) <> len then
+ begin
+ WriteLn('gzread err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ begin
+ WriteLn('bad gzread: ', PChar(uncompr));
+ Halt(1);
+ end
+ else
+ WriteLn('gzread(): ', PChar(uncompr));
+
+ pos := gzseek(zfile, -8, SEEK_CUR);
+ if (pos <> 6) or (gztell(zfile) <> pos) then
+ begin
+ WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile));
+ Halt(1);
+ end;
+
+ if gzgetc(zfile) <> ' ' then
+ begin
+ WriteLn('gzgetc error');
+ Halt(1);
+ end;
+
+ if gzungetc(' ', zfile) <> ' ' then
+ begin
+ WriteLn('gzungetc error');
+ Halt(1);
+ end;
+
+ gzgets(zfile, PChar(uncompr), uncomprLen);
+ uncomprLen := StrLen(PChar(uncompr));
+ if uncomprLen <> 7 then (* " hello!" *)
+ begin
+ WriteLn('gzgets err after gzseek: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ if StrComp(PChar(uncompr), hello + 6) <> 0 then
+ begin
+ WriteLn('bad gzgets after gzseek');
+ Halt(1);
+ end
+ else
+ WriteLn('gzgets() after gzseek: ', PChar(uncompr));
+
+ gzclose(zfile);
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with small buffers
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+ len: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_in := hello;
+ c_stream.next_out := compr;
+
+ while (c_stream.total_in <> len) and
+ (c_stream.total_out < comprLen) do
+ begin
+ c_stream.avail_out := 1; { force small buffers }
+ c_stream.avail_in := 1;
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+ end;
+
+ (* Finish the stream, still forcing small buffers: *)
+ while TRUE do
+ begin
+ c_stream.avail_out := 1;
+ err := deflate(c_stream, Z_FINISH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'deflate');
+ end;
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with small buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_inflate(compr: Pointer; comprLen : LongInt;
+ uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := 0;
+ d_stream.next_out := uncompr;
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ while (d_stream.total_out < uncomprLen) and
+ (d_stream.total_in < comprLen) do
+ begin
+ d_stream.avail_out := 1; (* force small buffers *)
+ d_stream.avail_in := 1;
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'inflate');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad inflate')
+ else
+ WriteLn('inflate(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with large buffers and dynamic change of compression level
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_large_deflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+begin
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_out := compr;
+ c_stream.avail_out := Integer(comprLen);
+
+ (* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ *)
+ c_stream.next_in := uncompr;
+ c_stream.avail_in := Integer(uncomprLen);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+ if c_stream.avail_in <> 0 then
+ EXIT_ERR('deflate not greedy');
+
+ (* Feed in already compressed data and switch to no compression: *)
+ deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in := compr;
+ c_stream.avail_in := Integer(comprLen div 2);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ (* Switch back to compressing mode: *)
+ deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in := uncompr;
+ c_stream.avail_in := Integer(uncomprLen);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ EXIT_ERR('deflate should report Z_STREAM_END');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with large buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_large_inflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := Integer(comprLen);
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ while TRUE do
+ begin
+ d_stream.next_out := uncompr; (* discard the output *)
+ d_stream.avail_out := Integer(uncomprLen);
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'large inflate');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then
+ begin
+ WriteLn('bad large inflate: ', d_stream.total_out);
+ Halt(1);
+ end
+ else
+ WriteLn('large_inflate(): OK');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with full flush
+ *)
+{$IFDEF TEST_FLUSH}
+procedure test_flush(compr: Pointer; var comprLen : LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+ len: Integer;
+begin
+ len := StrLen(hello)+1;
+
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_in := hello;
+ c_stream.next_out := compr;
+ c_stream.avail_in := 3;
+ c_stream.avail_out := Integer(comprLen);
+ err := deflate(c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *)
+ c_stream.avail_in := len - 3;
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ CHECK_ERR(err, 'deflate');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+
+ comprLen := c_stream.total_out;
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflateSync()
+ *)
+{$IFDEF TEST_SYNC}
+procedure test_sync(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := 2; (* just read the zlib header *)
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ d_stream.next_out := uncompr;
+ d_stream.avail_out := Integer(uncomprLen);
+
+ inflate(d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'inflate');
+
+ d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *)
+ err := inflateSync(d_stream); (* but skip the damaged part *)
+ CHECK_ERR(err, 'inflateSync');
+
+ err := inflate(d_stream, Z_FINISH);
+ if err <> Z_DATA_ERROR then
+ EXIT_ERR('inflate should report DATA_ERROR');
+ (* Because of incorrect adler32 *)
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ WriteLn('after inflateSync(): hel', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+begin
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary));
+ CHECK_ERR(err, 'deflateSetDictionary');
+
+ dictId := c_stream.adler;
+ c_stream.next_out := compr;
+ c_stream.avail_out := Integer(comprLen);
+
+ c_stream.next_in := hello;
+ c_stream.avail_in := StrLen(hello)+1;
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ EXIT_ERR('deflate should report Z_STREAM_END');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with a preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_inflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := Integer(comprLen);
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ d_stream.next_out := uncompr;
+ d_stream.avail_out := Integer(uncomprLen);
+
+ while TRUE do
+ begin
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ if err = Z_NEED_DICT then
+ begin
+ if d_stream.adler <> dictId then
+ EXIT_ERR('unexpected dictionary');
+ err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary));
+ end;
+ CHECK_ERR(err, 'inflate with dict');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad inflate with dict')
+ else
+ WriteLn('inflate with dictionary: ', PChar(uncompr));
+end;
+{$ENDIF}
+
+var compr, uncompr: Pointer;
+ comprLen, uncomprLen: LongInt;
+
+begin
+ if zlibVersion^ <> ZLIB_VERSION[1] then
+ EXIT_ERR('Incompatible zlib version');
+
+ WriteLn('zlib version: ', zlibVersion);
+ WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags]));
+
+ comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *)
+ uncomprLen := comprLen;
+ GetMem(compr, comprLen);
+ GetMem(uncompr, uncomprLen);
+ if (compr = NIL) or (uncompr = NIL) then
+ EXIT_ERR('Out of memory');
+ (* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ *)
+ FillChar(compr^, comprLen, 0);
+ FillChar(uncompr^, uncomprLen, 0);
+
+ {$IFDEF TEST_COMPRESS}
+ WriteLn('** Testing compress');
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_GZIO}
+ WriteLn('** Testing gzio');
+ if ParamCount >= 1 then
+ test_gzio(ParamStr(1), uncompr, uncomprLen)
+ else
+ test_gzio(TESTFILE, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_DEFLATE}
+ WriteLn('** Testing deflate with small buffers');
+ test_deflate(compr, comprLen);
+ {$ENDIF}
+ {$IFDEF TEST_INFLATE}
+ WriteLn('** Testing inflate with small buffers');
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_DEFLATE}
+ WriteLn('** Testing deflate with large buffers');
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+ {$IFDEF TEST_INFLATE}
+ WriteLn('** Testing inflate with large buffers');
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_FLUSH}
+ WriteLn('** Testing deflate with full flush');
+ test_flush(compr, comprLen);
+ {$ENDIF}
+ {$IFDEF TEST_SYNC}
+ WriteLn('** Testing inflateSync');
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+ comprLen := uncomprLen;
+
+ {$IFDEF TEST_DICT}
+ WriteLn('** Testing deflate and inflate with preset dictionary');
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ FreeMem(compr, comprLen);
+ FreeMem(uncompr, uncomprLen);
+end.
--- /dev/null
+
+This directory contains a Pascal (Delphi, Kylix) interface to the
+zlib data compression library.
+
+
+Directory listing
+=================
+
+zlibd32.mak makefile for Borland C++
+example.pas usage example of zlib
+zlibpas.pas the Pascal interface to zlib
+readme.txt this file
+
+
+Compatibility notes
+===================
+
+- Although the name "zlib" would have been more normal for the
+ zlibpas unit, this name is already taken by Borland's ZLib unit.
+ This is somehow unfortunate, because that unit is not a genuine
+ interface to the full-fledged zlib functionality, but a suite of
+ class wrappers around zlib streams. Other essential features,
+ such as checksums, are missing.
+ It would have been more appropriate for that unit to have a name
+ like "ZStreams", or something similar.
+
+- The C and zlib-supplied types int, uInt, long, uLong, etc. are
+ translated directly into Pascal types of similar sizes (Integer,
+ LongInt, etc.), to avoid namespace pollution. In particular,
+ there is no conversion of unsigned int into a Pascal unsigned
+ integer. The Word type is non-portable and has the same size
+ (16 bits) both in a 16-bit and in a 32-bit environment, unlike
+ Integer. Even if there is a 32-bit Cardinal type, there is no
+ real need for unsigned int in zlib under a 32-bit environment.
+
+- Except for the callbacks, the zlib function interfaces are
+ assuming the calling convention normally used in Pascal
+ (__pascal for DOS and Windows16, __fastcall for Windows32).
+ Since the cdecl keyword is used, the old Turbo Pascal does
+ not work with this interface.
+
+- The gz* function interfaces are not translated, to avoid
+ interfacing problems with the C runtime library. Besides,
+ gzprintf(gzFile file, const char *format, ...)
+ cannot be translated into Pascal.
+
+
+Legal issues
+============
+
+The zlibpas interface is:
+ Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler.
+ Copyright (C) 1998 by Bob Dellaca.
+ Copyright (C) 2003 by Cosmin Truta.
+
+The example program is:
+ Copyright (C) 1995-2003 by Jean-loup Gailly.
+ Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali.
+ Copyright (C) 2003 by Cosmin Truta.
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
--- /dev/null
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+ -del *.obj
+ -del *.exe
+ -del *.lib
+ -del *.tds
+ -del zlib.bak
+ -del foo.gz
+
--- /dev/null
+(* zlibpas -- Pascal interface to the zlib data compression library
+ *
+ * Copyright (C) 2003 Cosmin Truta.
+ * Derived from original sources by Bob Dellaca.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+unit zlibpas;
+
+interface
+
+const
+ ZLIB_VERSION = '1.2.8';
+ ZLIB_VERNUM = $1280;
+
+type
+ alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
+ cdecl;
+ free_func = procedure(opaque, address: Pointer);
+ cdecl;
+
+ in_func = function(opaque: Pointer; var buf: PByte): Integer;
+ cdecl;
+ out_func = function(opaque: Pointer; buf: PByte; size: Integer): Integer;
+ cdecl;
+
+ z_streamp = ^z_stream;
+ z_stream = packed record
+ next_in: PChar; (* next input byte *)
+ avail_in: Integer; (* number of bytes available at next_in *)
+ total_in: LongInt; (* total nb of input bytes read so far *)
+
+ next_out: PChar; (* next output byte should be put there *)
+ avail_out: Integer; (* remaining free space at next_out *)
+ total_out: LongInt; (* total nb of bytes output so far *)
+
+ msg: PChar; (* last error message, NULL if no error *)
+ state: Pointer; (* not visible by applications *)
+
+ zalloc: alloc_func; (* used to allocate the internal state *)
+ zfree: free_func; (* used to free the internal state *)
+ opaque: Pointer; (* private data object passed to zalloc and zfree *)
+
+ data_type: Integer; (* best guess about the data type: ascii or binary *)
+ adler: LongInt; (* adler32 value of the uncompressed data *)
+ reserved: LongInt; (* reserved for future use *)
+ end;
+
+ gz_headerp = ^gz_header;
+ gz_header = packed record
+ text: Integer; (* true if compressed data believed to be text *)
+ time: LongInt; (* modification time *)
+ xflags: Integer; (* extra flags (not used when writing a gzip file) *)
+ os: Integer; (* operating system *)
+ extra: PChar; (* pointer to extra field or Z_NULL if none *)
+ extra_len: Integer; (* extra field length (valid if extra != Z_NULL) *)
+ extra_max: Integer; (* space at extra (only when reading header) *)
+ name: PChar; (* pointer to zero-terminated file name or Z_NULL *)
+ name_max: Integer; (* space at name (only when reading header) *)
+ comment: PChar; (* pointer to zero-terminated comment or Z_NULL *)
+ comm_max: Integer; (* space at comment (only when reading header) *)
+ hcrc: Integer; (* true if there was or will be a header crc *)
+ done: Integer; (* true when done reading gzip header *)
+ end;
+
+(* constants *)
+const
+ Z_NO_FLUSH = 0;
+ Z_PARTIAL_FLUSH = 1;
+ Z_SYNC_FLUSH = 2;
+ Z_FULL_FLUSH = 3;
+ Z_FINISH = 4;
+ Z_BLOCK = 5;
+ Z_TREES = 6;
+
+ Z_OK = 0;
+ Z_STREAM_END = 1;
+ Z_NEED_DICT = 2;
+ Z_ERRNO = -1;
+ Z_STREAM_ERROR = -2;
+ Z_DATA_ERROR = -3;
+ Z_MEM_ERROR = -4;
+ Z_BUF_ERROR = -5;
+ Z_VERSION_ERROR = -6;
+
+ Z_NO_COMPRESSION = 0;
+ Z_BEST_SPEED = 1;
+ Z_BEST_COMPRESSION = 9;
+ Z_DEFAULT_COMPRESSION = -1;
+
+ Z_FILTERED = 1;
+ Z_HUFFMAN_ONLY = 2;
+ Z_RLE = 3;
+ Z_FIXED = 4;
+ Z_DEFAULT_STRATEGY = 0;
+
+ Z_BINARY = 0;
+ Z_TEXT = 1;
+ Z_ASCII = 1;
+ Z_UNKNOWN = 2;
+
+ Z_DEFLATED = 8;
+
+(* basic functions *)
+function zlibVersion: PChar;
+function deflateInit(var strm: z_stream; level: Integer): Integer;
+function deflate(var strm: z_stream; flush: Integer): Integer;
+function deflateEnd(var strm: z_stream): Integer;
+function inflateInit(var strm: z_stream): Integer;
+function inflate(var strm: z_stream; flush: Integer): Integer;
+function inflateEnd(var strm: z_stream): Integer;
+
+(* advanced functions *)
+function deflateInit2(var strm: z_stream; level, method, windowBits,
+ memLevel, strategy: Integer): Integer;
+function deflateSetDictionary(var strm: z_stream; const dictionary: PChar;
+ dictLength: Integer): Integer;
+function deflateCopy(var dest, source: z_stream): Integer;
+function deflateReset(var strm: z_stream): Integer;
+function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
+function deflateTune(var strm: z_stream; good_length, max_lazy, nice_length, max_chain: Integer): Integer;
+function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
+function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
+function deflateSetHeader(var strm: z_stream; head: gz_header): Integer;
+function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
+function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
+ dictLength: Integer): Integer;
+function inflateSync(var strm: z_stream): Integer;
+function inflateCopy(var dest, source: z_stream): Integer;
+function inflateReset(var strm: z_stream): Integer;
+function inflateReset2(var strm: z_stream; windowBits: Integer): Integer;
+function inflatePrime(var strm: z_stream; bits, value: Integer): Integer;
+function inflateMark(var strm: z_stream): LongInt;
+function inflateGetHeader(var strm: z_stream; var head: gz_header): Integer;
+function inflateBackInit(var strm: z_stream;
+ windowBits: Integer; window: PChar): Integer;
+function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer;
+ out_fn: out_func; out_desc: Pointer): Integer;
+function inflateBackEnd(var strm: z_stream): Integer;
+function zlibCompileFlags: LongInt;
+
+(* utility functions *)
+function compress(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt): Integer;
+function compress2(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt;
+ level: Integer): Integer;
+function compressBound(sourceLen: LongInt): LongInt;
+function uncompress(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt): Integer;
+
+(* checksum functions *)
+function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt;
+function adler32_combine(adler1, adler2, len2: LongInt): LongInt;
+function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt;
+function crc32_combine(crc1, crc2, len2: LongInt): LongInt;
+
+(* various hacks, don't look :) *)
+function deflateInit_(var strm: z_stream; level: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateInit_(var strm: z_stream; const version: PChar;
+ stream_size: Integer): Integer;
+function deflateInit2_(var strm: z_stream;
+ level, method, windowBits, memLevel, strategy: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateInit2_(var strm: z_stream; windowBits: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateBackInit_(var strm: z_stream;
+ windowBits: Integer; window: PChar;
+ const version: PChar; stream_size: Integer): Integer;
+
+
+implementation
+
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
+{$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
+
+function adler32; external;
+function adler32_combine; external;
+function compress; external;
+function compress2; external;
+function compressBound; external;
+function crc32; external;
+function crc32_combine; external;
+function deflate; external;
+function deflateBound; external;
+function deflateCopy; external;
+function deflateEnd; external;
+function deflateInit_; external;
+function deflateInit2_; external;
+function deflateParams; external;
+function deflatePending; external;
+function deflatePrime; external;
+function deflateReset; external;
+function deflateSetDictionary; external;
+function deflateSetHeader; external;
+function deflateTune; external;
+function inflate; external;
+function inflateBack; external;
+function inflateBackEnd; external;
+function inflateBackInit_; external;
+function inflateCopy; external;
+function inflateEnd; external;
+function inflateGetHeader; external;
+function inflateInit_; external;
+function inflateInit2_; external;
+function inflateMark; external;
+function inflatePrime; external;
+function inflateReset; external;
+function inflateReset2; external;
+function inflateSetDictionary; external;
+function inflateSync; external;
+function uncompress; external;
+function zlibCompileFlags; external;
+function zlibVersion; external;
+
+function deflateInit(var strm: z_stream; level: Integer): Integer;
+begin
+ Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(var strm: z_stream; level, method, windowBits, memLevel,
+ strategy: Integer): Integer;
+begin
+ Result := deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(var strm: z_stream): Integer;
+begin
+ Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
+begin
+ Result := inflateInit2_(strm, windowBits, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateBackInit(var strm: z_stream;
+ windowBits: Integer; window: PChar): Integer;
+begin
+ Result := inflateBackInit_(strm, windowBits, window,
+ ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+ GetMem(Result, Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+ FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
+begin
+ FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
+begin
+ Move(source^, dest^, count);
+end;
+
+end.
--- /dev/null
+CFLAGS=-O
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h
+
+test: puff
+ puff zeros.raw
+
+puft: puff.c puff.h pufftest.o
+ cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+ @rm -f *.gcov *.gcda
+ @puft -w zeros.raw 2>&1 | cat > /dev/null
+ @echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+ @echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+ @echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+ @echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+ @echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+ @echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+ @echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+ @puft -f zeros.raw 2>&1 | cat > /dev/null
+ @echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+ @echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+ @echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+ @echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+ @echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+ @echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+ @gcov -n puff.c
+
+clean:
+ rm -f puff puft *.o *.gc*
--- /dev/null
+Puff -- A Simple Inflate
+3 Mar 2003
+Mark Adler
+madler@alumni.caltech.edu
+
+What this is --
+
+puff.c provides the routine puff() to decompress the deflate data format. It
+does so more slowly than zlib, but the code is about one-fifth the size of the
+inflate code in zlib, and written to be very easy to read.
+
+Why I wrote this --
+
+puff.c was written to document the deflate format unambiguously, by virtue of
+being working C code. It is meant to supplement RFC 1951, which formally
+describes the deflate format. I have received many questions on details of the
+deflate format, and I hope that reading this code will answer those questions.
+puff.c is heavily commented with details of the deflate format, especially
+those little nooks and cranies of the format that might not be obvious from a
+specification.
+
+puff.c may also be useful in applications where code size or memory usage is a
+very limited resource, and speed is not as important.
+
+How to use it --
+
+Well, most likely you should just be reading puff.c and using zlib for actual
+applications, but if you must ...
+
+Include puff.h in your code, which provides this prototype:
+
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen); /* amount of input available */
+
+Then you can call puff() to decompress a deflate stream that is in memory in
+its entirety at source, to a sufficiently sized block of memory for the
+decompressed data at dest. puff() is the only external symbol in puff.c The
+only C library functions that puff.c needs are setjmp() and longjmp(), which
+are used to simplify error checking in the code to improve readabilty. puff.c
+does no memory allocation, and uses less than 2K bytes off of the stack.
+
+If destlen is not enough space for the uncompressed data, then inflate will
+return an error without writing more than destlen bytes. Note that this means
+that in order to decompress the deflate data successfully, you need to know
+the size of the uncompressed data ahead of time.
+
+If needed, puff() can determine the size of the uncompressed data with no
+output space. This is done by passing dest equal to (unsigned char *)0. Then
+the initial value of *destlen is ignored and *destlen is set to the length of
+the uncompressed data. So if the size of the uncompressed data is not known,
+then two passes of puff() can be used--first to determine the size, and second
+to do the actual inflation after allocating the appropriate memory. Not
+pretty, but it works. (This is one of the reasons you should be using zlib.)
+
+The deflate format is self-terminating. If the deflate stream does not end
+in *sourcelen bytes, puff() will return an error without reading at or past
+endsource.
+
+On return, *sourcelen is updated to the amount of input data consumed, and
+*destlen is updated to the size of the uncompressed data. See the comments
+in puff.c for the possible return codes for puff().
--- /dev/null
+/*
+ * puff.c
+ * Copyright (C) 2002-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.3, 21 Jan 2013
+ *
+ * puff.c is a simple inflate written to be an unambiguous way to specify the
+ * deflate format. It is not written for speed but rather simplicity. As a
+ * side benefit, this code might actually be useful when small code is more
+ * important than speed, such as bootstrap applications. For typical deflate
+ * data, zlib's inflate() is about four times as fast as puff(). zlib's
+ * inflate compiles to around 20K on my machine, whereas puff.c compiles to
+ * around 4K on my machine (a PowerPC using GNU cc). If the faster decode()
+ * function here is used, then puff() is only twice as slow as zlib's
+ * inflate().
+ *
+ * All dynamically allocated memory comes from the stack. The stack required
+ * is less than 2K bytes. This code is compatible with 16-bit int's and
+ * assumes that long's are at least 32 bits. puff.c uses the short data type,
+ * assumed to be 16 bits, for arrays in order to to conserve memory. The code
+ * works whether integers are stored big endian or little endian.
+ *
+ * In the comments below are "Format notes" that describe the inflate process
+ * and document some of the less obvious aspects of the format. This source
+ * code is meant to supplement RFC 1951, which formally describes the deflate
+ * format:
+ *
+ * http://www.zlib.org/rfc-deflate.html
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 10 Feb 2002 - First version
+ * 1.1 17 Feb 2002 - Clarifications of some comments and notes
+ * - Update puff() dest and source pointers on negative
+ * errors to facilitate debugging deflators
+ * - Remove longest from struct huffman -- not needed
+ * - Simplify offs[] index in construct()
+ * - Add input size and checking, using longjmp() to
+ * maintain easy readability
+ * - Use short data type for large arrays
+ * - Use pointers instead of long to specify source and
+ * destination sizes to avoid arbitrary 4 GB limits
+ * 1.2 17 Mar 2002 - Add faster version of decode(), doubles speed (!),
+ * but leave simple version for readabilty
+ * - Make sure invalid distances detected if pointers
+ * are 16 bits
+ * - Fix fixed codes table error
+ * - Provide a scanning mode for determining size of
+ * uncompressed data
+ * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Gailly]
+ * - Add a puff.h file for the interface
+ * - Add braces in puff() for else do [Gailly]
+ * - Use indexes instead of pointers for readability
+ * 1.4 31 Mar 2002 - Simplify construct() code set check
+ * - Fix some comments
+ * - Add FIXLCODES #define
+ * 1.5 6 Apr 2002 - Minor comment fixes
+ * 1.6 7 Aug 2002 - Minor format changes
+ * 1.7 3 Mar 2003 - Added test code for distribution
+ * - Added zlib-like license
+ * 1.8 9 Jan 2004 - Added some comments on no distance codes case
+ * 1.9 21 Feb 2008 - Fix bug on 16-bit integer architectures [Pohland]
+ * - Catch missing end-of-block symbol error
+ * 2.0 25 Jul 2008 - Add #define to permit distance too far back
+ * - Add option in TEST code for puff to write the data
+ * - Add option in TEST code to skip input bytes
+ * - Allow TEST code to read from piped stdin
+ * 2.1 4 Apr 2010 - Avoid variable initialization for happier compilers
+ * - Avoid unsigned comparisons for even happier compilers
+ * 2.2 25 Apr 2010 - Fix bug in variable initializations [Oberhumer]
+ * - Add const where appropriate [Oberhumer]
+ * - Split if's and ?'s for coverage testing
+ * - Break out test code to separate file
+ * - Move NIL to puff.h
+ * - Allow incomplete code only if single code length is 1
+ * - Add full code coverage test to Makefile
+ * 2.3 21 Jan 2013 - Check for invalid code length codes in dynamic blocks
+ */
+
+#include <setjmp.h> /* for setjmp(), longjmp(), and jmp_buf */
+#include "puff.h" /* prototype for puff() */
+
+#define local static /* for local function definitions */
+
+/*
+ * Maximums for allocations and loops. It is not useful to change these --
+ * they are fixed by the deflate format.
+ */
+#define MAXBITS 15 /* maximum bits in a code */
+#define MAXLCODES 286 /* maximum number of literal/length codes */
+#define MAXDCODES 30 /* maximum number of distance codes */
+#define MAXCODES (MAXLCODES+MAXDCODES) /* maximum codes lengths to read */
+#define FIXLCODES 288 /* number of fixed literal/length codes */
+
+/* input and output state */
+struct state {
+ /* output state */
+ unsigned char *out; /* output buffer */
+ unsigned long outlen; /* available space at out */
+ unsigned long outcnt; /* bytes written to out so far */
+
+ /* input state */
+ const unsigned char *in; /* input buffer */
+ unsigned long inlen; /* available input at in */
+ unsigned long incnt; /* bytes read so far */
+ int bitbuf; /* bit buffer */
+ int bitcnt; /* number of bits in bit buffer */
+
+ /* input limit error return state for bits() and decode() */
+ jmp_buf env;
+};
+
+/*
+ * Return need bits from the input stream. This always leaves less than
+ * eight bits in the buffer. bits() works properly for need == 0.
+ *
+ * Format notes:
+ *
+ * - Bits are stored in bytes from the least significant bit to the most
+ * significant bit. Therefore bits are dropped from the bottom of the bit
+ * buffer, using shift right, and new bytes are appended to the top of the
+ * bit buffer, using shift left.
+ */
+local int bits(struct state *s, int need)
+{
+ long val; /* bit accumulator (can use up to 20 bits) */
+
+ /* load at least need bits into val */
+ val = s->bitbuf;
+ while (s->bitcnt < need) {
+ if (s->incnt == s->inlen)
+ longjmp(s->env, 1); /* out of input */
+ val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */
+ s->bitcnt += 8;
+ }
+
+ /* drop need bits and update buffer, always zero to seven bits left */
+ s->bitbuf = (int)(val >> need);
+ s->bitcnt -= need;
+
+ /* return need bits, zeroing the bits above that */
+ return (int)(val & ((1L << need) - 1));
+}
+
+/*
+ * Process a stored block.
+ *
+ * Format notes:
+ *
+ * - After the two-bit stored block type (00), the stored block length and
+ * stored bytes are byte-aligned for fast copying. Therefore any leftover
+ * bits in the byte that has the last bit of the type, as many as seven, are
+ * discarded. The value of the discarded bits are not defined and should not
+ * be checked against any expectation.
+ *
+ * - The second inverted copy of the stored block length does not have to be
+ * checked, but it's probably a good idea to do so anyway.
+ *
+ * - A stored block can have zero length. This is sometimes used to byte-align
+ * subsets of the compressed data for random access or partial recovery.
+ */
+local int stored(struct state *s)
+{
+ unsigned len; /* length of stored block */
+
+ /* discard leftover bits from current byte (assumes s->bitcnt < 8) */
+ s->bitbuf = 0;
+ s->bitcnt = 0;
+
+ /* get length and check against its one's complement */
+ if (s->incnt + 4 > s->inlen)
+ return 2; /* not enough input */
+ len = s->in[s->incnt++];
+ len |= s->in[s->incnt++] << 8;
+ if (s->in[s->incnt++] != (~len & 0xff) ||
+ s->in[s->incnt++] != ((~len >> 8) & 0xff))
+ return -2; /* didn't match complement! */
+
+ /* copy len bytes from in to out */
+ if (s->incnt + len > s->inlen)
+ return 2; /* not enough input */
+ if (s->out != NIL) {
+ if (s->outcnt + len > s->outlen)
+ return 1; /* not enough output space */
+ while (len--)
+ s->out[s->outcnt++] = s->in[s->incnt++];
+ }
+ else { /* just scanning */
+ s->outcnt += len;
+ s->incnt += len;
+ }
+
+ /* done with a valid stored block */
+ return 0;
+}
+
+/*
+ * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of
+ * each length, which for a canonical code are stepped through in order.
+ * symbol[] are the symbol values in canonical order, where the number of
+ * entries is the sum of the counts in count[]. The decoding process can be
+ * seen in the function decode() below.
+ */
+struct huffman {
+ short *count; /* number of symbols of each length */
+ short *symbol; /* canonically ordered symbols */
+};
+
+/*
+ * Decode a code from the stream s using huffman table h. Return the symbol or
+ * a negative value if there is an error. If all of the lengths are zero, i.e.
+ * an empty code, or if the code is incomplete and an invalid code is received,
+ * then -10 is returned after reading MAXBITS bits.
+ *
+ * Format notes:
+ *
+ * - The codes as stored in the compressed data are bit-reversed relative to
+ * a simple integer ordering of codes of the same lengths. Hence below the
+ * bits are pulled from the compressed data one at a time and used to
+ * build the code value reversed from what is in the stream in order to
+ * permit simple integer comparisons for decoding. A table-based decoding
+ * scheme (as used in zlib) does not need to do this reversal.
+ *
+ * - The first code for the shortest length is all zeros. Subsequent codes of
+ * the same length are simply integer increments of the previous code. When
+ * moving up a length, a zero bit is appended to the code. For a complete
+ * code, the last code of the longest length will be all ones.
+ *
+ * - Incomplete codes are handled by this decoder, since they are permitted
+ * in the deflate format. See the format notes for fixed() and dynamic().
+ */
+#ifdef SLOW
+local int decode(struct state *s, const struct huffman *h)
+{
+ int len; /* current number of bits in code */
+ int code; /* len bits being decoded */
+ int first; /* first code of length len */
+ int count; /* number of codes of length len */
+ int index; /* index of first code of length len in symbol table */
+
+ code = first = index = 0;
+ for (len = 1; len <= MAXBITS; len++) {
+ code |= bits(s, 1); /* get next bit */
+ count = h->count[len];
+ if (code - count < first) /* if length len, return symbol */
+ return h->symbol[index + (code - first)];
+ index += count; /* else update for next length */
+ first += count;
+ first <<= 1;
+ code <<= 1;
+ }
+ return -10; /* ran out of codes */
+}
+
+/*
+ * A faster version of decode() for real applications of this code. It's not
+ * as readable, but it makes puff() twice as fast. And it only makes the code
+ * a few percent larger.
+ */
+#else /* !SLOW */
+local int decode(struct state *s, const struct huffman *h)
+{
+ int len; /* current number of bits in code */
+ int code; /* len bits being decoded */
+ int first; /* first code of length len */
+ int count; /* number of codes of length len */
+ int index; /* index of first code of length len in symbol table */
+ int bitbuf; /* bits from stream */
+ int left; /* bits left in next or left to process */
+ short *next; /* next number of codes */
+
+ bitbuf = s->bitbuf;
+ left = s->bitcnt;
+ code = first = index = 0;
+ len = 1;
+ next = h->count + 1;
+ while (1) {
+ while (left--) {
+ code |= bitbuf & 1;
+ bitbuf >>= 1;
+ count = *next++;
+ if (code - count < first) { /* if length len, return symbol */
+ s->bitbuf = bitbuf;
+ s->bitcnt = (s->bitcnt - len) & 7;
+ return h->symbol[index + (code - first)];
+ }
+ index += count; /* else update for next length */
+ first += count;
+ first <<= 1;
+ code <<= 1;
+ len++;
+ }
+ left = (MAXBITS+1) - len;
+ if (left == 0)
+ break;
+ if (s->incnt == s->inlen)
+ longjmp(s->env, 1); /* out of input */
+ bitbuf = s->in[s->incnt++];
+ if (left > 8)
+ left = 8;
+ }
+ return -10; /* ran out of codes */
+}
+#endif /* SLOW */
+
+/*
+ * Given the list of code lengths length[0..n-1] representing a canonical
+ * Huffman code for n symbols, construct the tables required to decode those
+ * codes. Those tables are the number of codes of each length, and the symbols
+ * sorted by length, retaining their original order within each length. The
+ * return value is zero for a complete code set, negative for an over-
+ * subscribed code set, and positive for an incomplete code set. The tables
+ * can be used if the return value is zero or positive, but they cannot be used
+ * if the return value is negative. If the return value is zero, it is not
+ * possible for decode() using that table to return an error--any stream of
+ * enough bits will resolve to a symbol. If the return value is positive, then
+ * it is possible for decode() using that table to return an error for received
+ * codes past the end of the incomplete lengths.
+ *
+ * Not used by decode(), but used for error checking, h->count[0] is the number
+ * of the n symbols not in the code. So n - h->count[0] is the number of
+ * codes. This is useful for checking for incomplete codes that have more than
+ * one symbol, which is an error in a dynamic block.
+ *
+ * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS
+ * This is assured by the construction of the length arrays in dynamic() and
+ * fixed() and is not verified by construct().
+ *
+ * Format notes:
+ *
+ * - Permitted and expected examples of incomplete codes are one of the fixed
+ * codes and any code with a single symbol which in deflate is coded as one
+ * bit instead of zero bits. See the format notes for fixed() and dynamic().
+ *
+ * - Within a given code length, the symbols are kept in ascending order for
+ * the code bits definition.
+ */
+local int construct(struct huffman *h, const short *length, int n)
+{
+ int symbol; /* current symbol when stepping through length[] */
+ int len; /* current length when stepping through h->count[] */
+ int left; /* number of possible codes left of current length */
+ short offs[MAXBITS+1]; /* offsets in symbol table for each length */
+
+ /* count number of codes of each length */
+ for (len = 0; len <= MAXBITS; len++)
+ h->count[len] = 0;
+ for (symbol = 0; symbol < n; symbol++)
+ (h->count[length[symbol]])++; /* assumes lengths are within bounds */
+ if (h->count[0] == n) /* no codes! */
+ return 0; /* complete, but decode() will fail */
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1; /* one possible code of zero length */
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1; /* one more bit, double codes left */
+ left -= h->count[len]; /* deduct count from possible codes */
+ if (left < 0)
+ return left; /* over-subscribed--return negative */
+ } /* left > 0 means incomplete */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + h->count[len];
+
+ /*
+ * put symbols in table sorted by length, by symbol order within each
+ * length
+ */
+ for (symbol = 0; symbol < n; symbol++)
+ if (length[symbol] != 0)
+ h->symbol[offs[length[symbol]]++] = symbol;
+
+ /* return zero for complete set, positive for incomplete set */
+ return left;
+}
+
+/*
+ * Decode literal/length and distance codes until an end-of-block code.
+ *
+ * Format notes:
+ *
+ * - Compressed data that is after the block type if fixed or after the code
+ * description if dynamic is a combination of literals and length/distance
+ * pairs terminated by and end-of-block code. Literals are simply Huffman
+ * coded bytes. A length/distance pair is a coded length followed by a
+ * coded distance to represent a string that occurs earlier in the
+ * uncompressed data that occurs again at the current location.
+ *
+ * - Literals, lengths, and the end-of-block code are combined into a single
+ * code of up to 286 symbols. They are 256 literals (0..255), 29 length
+ * symbols (257..285), and the end-of-block symbol (256).
+ *
+ * - There are 256 possible lengths (3..258), and so 29 symbols are not enough
+ * to represent all of those. Lengths 3..10 and 258 are in fact represented
+ * by just a length symbol. Lengths 11..257 are represented as a symbol and
+ * some number of extra bits that are added as an integer to the base length
+ * of the length symbol. The number of extra bits is determined by the base
+ * length symbol. These are in the static arrays below, lens[] for the base
+ * lengths and lext[] for the corresponding number of extra bits.
+ *
+ * - The reason that 258 gets its own symbol is that the longest length is used
+ * often in highly redundant files. Note that 258 can also be coded as the
+ * base value 227 plus the maximum extra value of 31. While a good deflate
+ * should never do this, it is not an error, and should be decoded properly.
+ *
+ * - If a length is decoded, including its extra bits if any, then it is
+ * followed a distance code. There are up to 30 distance symbols. Again
+ * there are many more possible distances (1..32768), so extra bits are added
+ * to a base value represented by the symbol. The distances 1..4 get their
+ * own symbol, but the rest require extra bits. The base distances and
+ * corresponding number of extra bits are below in the static arrays dist[]
+ * and dext[].
+ *
+ * - Literal bytes are simply written to the output. A length/distance pair is
+ * an instruction to copy previously uncompressed bytes to the output. The
+ * copy is from distance bytes back in the output stream, copying for length
+ * bytes.
+ *
+ * - Distances pointing before the beginning of the output data are not
+ * permitted.
+ *
+ * - Overlapped copies, where the length is greater than the distance, are
+ * allowed and common. For example, a distance of one and a length of 258
+ * simply copies the last byte 258 times. A distance of four and a length of
+ * twelve copies the last four bytes three times. A simple forward copy
+ * ignoring whether the length is greater than the distance or not implements
+ * this correctly. You should not use memcpy() since its behavior is not
+ * defined for overlapped arrays. You should not use memmove() or bcopy()
+ * since though their behavior -is- defined for overlapping arrays, it is
+ * defined to do the wrong thing in this case.
+ */
+local int codes(struct state *s,
+ const struct huffman *lencode,
+ const struct huffman *distcode)
+{
+ int symbol; /* decoded symbol */
+ int len; /* length for copy */
+ unsigned dist; /* distance for copy */
+ static const short lens[29] = { /* Size base for length codes 257..285 */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
+ static const short lext[29] = { /* Extra bits for length codes 257..285 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0};
+ static const short dists[30] = { /* Offset base for distance codes 0..29 */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577};
+ static const short dext[30] = { /* Extra bits for distance codes 0..29 */
+ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+ 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+ 12, 12, 13, 13};
+
+ /* decode literals and length/distance pairs */
+ do {
+ symbol = decode(s, lencode);
+ if (symbol < 0)
+ return symbol; /* invalid symbol */
+ if (symbol < 256) { /* literal: symbol is the byte */
+ /* write out the literal */
+ if (s->out != NIL) {
+ if (s->outcnt == s->outlen)
+ return 1;
+ s->out[s->outcnt] = symbol;
+ }
+ s->outcnt++;
+ }
+ else if (symbol > 256) { /* length */
+ /* get and compute length */
+ symbol -= 257;
+ if (symbol >= 29)
+ return -10; /* invalid fixed code */
+ len = lens[symbol] + bits(s, lext[symbol]);
+
+ /* get and check distance */
+ symbol = decode(s, distcode);
+ if (symbol < 0)
+ return symbol; /* invalid symbol */
+ dist = dists[symbol] + bits(s, dext[symbol]);
+#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (dist > s->outcnt)
+ return -11; /* distance too far back */
+#endif
+
+ /* copy length bytes from distance bytes back */
+ if (s->out != NIL) {
+ if (s->outcnt + len > s->outlen)
+ return 1;
+ while (len--) {
+ s->out[s->outcnt] =
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ dist > s->outcnt ?
+ 0 :
+#endif
+ s->out[s->outcnt - dist];
+ s->outcnt++;
+ }
+ }
+ else
+ s->outcnt += len;
+ }
+ } while (symbol != 256); /* end of block symbol */
+
+ /* done with a valid fixed or dynamic block */
+ return 0;
+}
+
+/*
+ * Process a fixed codes block.
+ *
+ * Format notes:
+ *
+ * - This block type can be useful for compressing small amounts of data for
+ * which the size of the code descriptions in a dynamic block exceeds the
+ * benefit of custom codes for that block. For fixed codes, no bits are
+ * spent on code descriptions. Instead the code lengths for literal/length
+ * codes and distance codes are fixed. The specific lengths for each symbol
+ * can be seen in the "for" loops below.
+ *
+ * - The literal/length code is complete, but has two symbols that are invalid
+ * and should result in an error if received. This cannot be implemented
+ * simply as an incomplete code since those two symbols are in the "middle"
+ * of the code. They are eight bits long and the longest literal/length\
+ * code is nine bits. Therefore the code must be constructed with those
+ * symbols, and the invalid symbols must be detected after decoding.
+ *
+ * - The fixed distance codes also have two invalid symbols that should result
+ * in an error if received. Since all of the distance codes are the same
+ * length, this can be implemented as an incomplete code. Then the invalid
+ * codes are detected while decoding.
+ */
+local int fixed(struct state *s)
+{
+ static int virgin = 1;
+ static short lencnt[MAXBITS+1], lensym[FIXLCODES];
+ static short distcnt[MAXBITS+1], distsym[MAXDCODES];
+ static struct huffman lencode, distcode;
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ int symbol;
+ short lengths[FIXLCODES];
+
+ /* construct lencode and distcode */
+ lencode.count = lencnt;
+ lencode.symbol = lensym;
+ distcode.count = distcnt;
+ distcode.symbol = distsym;
+
+ /* literal/length table */
+ for (symbol = 0; symbol < 144; symbol++)
+ lengths[symbol] = 8;
+ for (; symbol < 256; symbol++)
+ lengths[symbol] = 9;
+ for (; symbol < 280; symbol++)
+ lengths[symbol] = 7;
+ for (; symbol < FIXLCODES; symbol++)
+ lengths[symbol] = 8;
+ construct(&lencode, lengths, FIXLCODES);
+
+ /* distance table */
+ for (symbol = 0; symbol < MAXDCODES; symbol++)
+ lengths[symbol] = 5;
+ construct(&distcode, lengths, MAXDCODES);
+
+ /* do this just once */
+ virgin = 0;
+ }
+
+ /* decode data until end-of-block code */
+ return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Process a dynamic codes block.
+ *
+ * Format notes:
+ *
+ * - A dynamic block starts with a description of the literal/length and
+ * distance codes for that block. New dynamic blocks allow the compressor to
+ * rapidly adapt to changing data with new codes optimized for that data.
+ *
+ * - The codes used by the deflate format are "canonical", which means that
+ * the actual bits of the codes are generated in an unambiguous way simply
+ * from the number of bits in each code. Therefore the code descriptions
+ * are simply a list of code lengths for each symbol.
+ *
+ * - The code lengths are stored in order for the symbols, so lengths are
+ * provided for each of the literal/length symbols, and for each of the
+ * distance symbols.
+ *
+ * - If a symbol is not used in the block, this is represented by a zero as
+ * as the code length. This does not mean a zero-length code, but rather
+ * that no code should be created for this symbol. There is no way in the
+ * deflate format to represent a zero-length code.
+ *
+ * - The maximum number of bits in a code is 15, so the possible lengths for
+ * any code are 1..15.
+ *
+ * - The fact that a length of zero is not permitted for a code has an
+ * interesting consequence. Normally if only one symbol is used for a given
+ * code, then in fact that code could be represented with zero bits. However
+ * in deflate, that code has to be at least one bit. So for example, if
+ * only a single distance base symbol appears in a block, then it will be
+ * represented by a single code of length one, in particular one 0 bit. This
+ * is an incomplete code, since if a 1 bit is received, it has no meaning,
+ * and should result in an error. So incomplete distance codes of one symbol
+ * should be permitted, and the receipt of invalid codes should be handled.
+ *
+ * - It is also possible to have a single literal/length code, but that code
+ * must be the end-of-block code, since every dynamic block has one. This
+ * is not the most efficient way to create an empty block (an empty fixed
+ * block is fewer bits), but it is allowed by the format. So incomplete
+ * literal/length codes of one symbol should also be permitted.
+ *
+ * - If there are only literal codes and no lengths, then there are no distance
+ * codes. This is represented by one distance code with zero bits.
+ *
+ * - The list of up to 286 length/literal lengths and up to 30 distance lengths
+ * are themselves compressed using Huffman codes and run-length encoding. In
+ * the list of code lengths, a 0 symbol means no code, a 1..15 symbol means
+ * that length, and the symbols 16, 17, and 18 are run-length instructions.
+ * Each of 16, 17, and 18 are follwed by extra bits to define the length of
+ * the run. 16 copies the last length 3 to 6 times. 17 represents 3 to 10
+ * zero lengths, and 18 represents 11 to 138 zero lengths. Unused symbols
+ * are common, hence the special coding for zero lengths.
+ *
+ * - The symbols for 0..18 are Huffman coded, and so that code must be
+ * described first. This is simply a sequence of up to 19 three-bit values
+ * representing no code (0) or the code length for that symbol (1..7).
+ *
+ * - A dynamic block starts with three fixed-size counts from which is computed
+ * the number of literal/length code lengths, the number of distance code
+ * lengths, and the number of code length code lengths (ok, you come up with
+ * a better name!) in the code descriptions. For the literal/length and
+ * distance codes, lengths after those provided are considered zero, i.e. no
+ * code. The code length code lengths are received in a permuted order (see
+ * the order[] array below) to make a short code length code length list more
+ * likely. As it turns out, very short and very long codes are less likely
+ * to be seen in a dynamic code description, hence what may appear initially
+ * to be a peculiar ordering.
+ *
+ * - Given the number of literal/length code lengths (nlen) and distance code
+ * lengths (ndist), then they are treated as one long list of nlen + ndist
+ * code lengths. Therefore run-length coding can and often does cross the
+ * boundary between the two sets of lengths.
+ *
+ * - So to summarize, the code description at the start of a dynamic block is
+ * three counts for the number of code lengths for the literal/length codes,
+ * the distance codes, and the code length codes. This is followed by the
+ * code length code lengths, three bits each. This is used to construct the
+ * code length code which is used to read the remainder of the lengths. Then
+ * the literal/length code lengths and distance lengths are read as a single
+ * set of lengths using the code length codes. Codes are constructed from
+ * the resulting two sets of lengths, and then finally you can start
+ * decoding actual compressed data in the block.
+ *
+ * - For reference, a "typical" size for the code description in a dynamic
+ * block is around 80 bytes.
+ */
+local int dynamic(struct state *s)
+{
+ int nlen, ndist, ncode; /* number of lengths in descriptor */
+ int index; /* index of lengths[] */
+ int err; /* construct() return value */
+ short lengths[MAXCODES]; /* descriptor code lengths */
+ short lencnt[MAXBITS+1], lensym[MAXLCODES]; /* lencode memory */
+ short distcnt[MAXBITS+1], distsym[MAXDCODES]; /* distcode memory */
+ struct huffman lencode, distcode; /* length and distance codes */
+ static const short order[19] = /* permutation of code length codes */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* construct lencode and distcode */
+ lencode.count = lencnt;
+ lencode.symbol = lensym;
+ distcode.count = distcnt;
+ distcode.symbol = distsym;
+
+ /* get number of lengths in each table, check lengths */
+ nlen = bits(s, 5) + 257;
+ ndist = bits(s, 5) + 1;
+ ncode = bits(s, 4) + 4;
+ if (nlen > MAXLCODES || ndist > MAXDCODES)
+ return -3; /* bad counts */
+
+ /* read code length code lengths (really), missing lengths are zero */
+ for (index = 0; index < ncode; index++)
+ lengths[order[index]] = bits(s, 3);
+ for (; index < 19; index++)
+ lengths[order[index]] = 0;
+
+ /* build huffman table for code lengths codes (use lencode temporarily) */
+ err = construct(&lencode, lengths, 19);
+ if (err != 0) /* require complete code set here */
+ return -4;
+
+ /* read length/literal and distance code length tables */
+ index = 0;
+ while (index < nlen + ndist) {
+ int symbol; /* decoded value */
+ int len; /* last length to repeat */
+
+ symbol = decode(s, &lencode);
+ if (symbol < 0)
+ return symbol; /* invalid symbol */
+ if (symbol < 16) /* length in 0..15 */
+ lengths[index++] = symbol;
+ else { /* repeat instruction */
+ len = 0; /* assume repeating zeros */
+ if (symbol == 16) { /* repeat last length 3..6 times */
+ if (index == 0)
+ return -5; /* no last length! */
+ len = lengths[index - 1]; /* last length */
+ symbol = 3 + bits(s, 2);
+ }
+ else if (symbol == 17) /* repeat zero 3..10 times */
+ symbol = 3 + bits(s, 3);
+ else /* == 18, repeat zero 11..138 times */
+ symbol = 11 + bits(s, 7);
+ if (index + symbol > nlen + ndist)
+ return -6; /* too many lengths! */
+ while (symbol--) /* repeat last or zero symbol times */
+ lengths[index++] = len;
+ }
+ }
+
+ /* check for end-of-block code -- there better be one! */
+ if (lengths[256] == 0)
+ return -9;
+
+ /* build huffman table for literal/length codes */
+ err = construct(&lencode, lengths, nlen);
+ if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
+ return -7; /* incomplete code ok only for single length 1 code */
+
+ /* build huffman table for distance codes */
+ err = construct(&distcode, lengths + nlen, ndist);
+ if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
+ return -8; /* incomplete code ok only for single length 1 code */
+
+ /* decode data until end-of-block code */
+ return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Inflate source to dest. On return, destlen and sourcelen are updated to the
+ * size of the uncompressed data and the size of the deflate data respectively.
+ * On success, the return value of puff() is zero. If there is an error in the
+ * source data, i.e. it is not in the deflate format, then a negative value is
+ * returned. If there is not enough input available or there is not enough
+ * output space, then a positive error is returned. In that case, destlen and
+ * sourcelen are not updated to facilitate retrying from the beginning with the
+ * provision of more input data or more output space. In the case of invalid
+ * inflate data (a negative error), the dest and source pointers are updated to
+ * facilitate the debugging of deflators.
+ *
+ * puff() also has a mode to determine the size of the uncompressed output with
+ * no output written. For this dest must be (unsigned char *)0. In this case,
+ * the input value of *destlen is ignored, and on return *destlen is set to the
+ * size of the uncompressed output.
+ *
+ * The return codes are:
+ *
+ * 2: available inflate data did not terminate
+ * 1: output space exhausted before completing inflate
+ * 0: successful inflate
+ * -1: invalid block type (type == 3)
+ * -2: stored block length did not match one's complement
+ * -3: dynamic block code description: too many length or distance codes
+ * -4: dynamic block code description: code lengths codes incomplete
+ * -5: dynamic block code description: repeat lengths with no first length
+ * -6: dynamic block code description: repeat more than specified lengths
+ * -7: dynamic block code description: invalid literal/length code lengths
+ * -8: dynamic block code description: invalid distance code lengths
+ * -9: dynamic block code description: missing end-of-block code
+ * -10: invalid literal/length or distance code in fixed or dynamic block
+ * -11: distance is too far back in fixed or dynamic block
+ *
+ * Format notes:
+ *
+ * - Three bits are read for each block to determine the kind of block and
+ * whether or not it is the last block. Then the block is decoded and the
+ * process repeated if it was not the last block.
+ *
+ * - The leftover bits in the last byte of the deflate data after the last
+ * block (if it was a fixed or dynamic block) are undefined and have no
+ * expected values to check.
+ */
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ const unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen) /* amount of input available */
+{
+ struct state s; /* input/output state */
+ int last, type; /* block information */
+ int err; /* return value */
+
+ /* initialize output state */
+ s.out = dest;
+ s.outlen = *destlen; /* ignored if dest is NIL */
+ s.outcnt = 0;
+
+ /* initialize input state */
+ s.in = source;
+ s.inlen = *sourcelen;
+ s.incnt = 0;
+ s.bitbuf = 0;
+ s.bitcnt = 0;
+
+ /* return if bits() or decode() tries to read past available input */
+ if (setjmp(s.env) != 0) /* if came back here via longjmp() */
+ err = 2; /* then skip do-loop, return error */
+ else {
+ /* process blocks until last block or error */
+ do {
+ last = bits(&s, 1); /* one if last block */
+ type = bits(&s, 2); /* block type 0..3 */
+ err = type == 0 ?
+ stored(&s) :
+ (type == 1 ?
+ fixed(&s) :
+ (type == 2 ?
+ dynamic(&s) :
+ -1)); /* type == 3, invalid */
+ if (err != 0)
+ break; /* return with error */
+ } while (!last);
+ }
+
+ /* update the lengths and return */
+ if (err <= 0) {
+ *destlen = s.outcnt;
+ *sourcelen = s.incnt;
+ }
+ return err;
+}
--- /dev/null
+/* puff.h
+ Copyright (C) 2002-2013 Mark Adler, all rights reserved
+ version 2.3, 21 Jan 2013
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler@alumni.caltech.edu
+ */
+
+
+/*
+ * See puff.c for purpose and usage.
+ */
+#ifndef NIL
+# define NIL ((unsigned char *)0) /* for no output option */
+#endif
+
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ const unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen); /* amount of input available */
--- /dev/null
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.3, 21 Jan 2013
+ */
+
+/* Example of how to use puff().
+
+ Usage: puff [-w] [-f] [-nnn] file
+ ... | puff [-w] [-f] [-nnn]
+
+ where file is the input file with deflate data, nnn is the number of bytes
+ of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+ -w is used to write the decompressed data to stdout. -f is for coverage
+ testing, and causes pufftest to fail with not enough output space (-f does
+ a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+ 3, or 5 times a power of 2 -- the result is always > size, until the result
+ is the maximum value of an unsigned long, where it remains. This is useful
+ to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+ int n;
+ size_t m;
+
+ m = size;
+ for (n = 0; m; n++)
+ m >>= 1;
+ if (n < 3)
+ return size + 1;
+ n -= 3;
+ m = size >> n;
+ m += m == 6 ? 2 : 1;
+ m <<= n;
+ return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+ Reallocate to larger buffers until the entire file is read in. Return a
+ pointer to the allocated data, or NULL if there was a memory allocation
+ failure. *len is the number of bytes of data read from the input file (even
+ if load() returns NULL). If the input file was empty or could not be opened
+ or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+ size_t size;
+ void *buf, *swap;
+ FILE *in;
+
+ *len = 0;
+ buf = malloc(size = 4096);
+ if (buf == NULL)
+ return NULL;
+ in = name == NULL ? stdin : fopen(name, "rb");
+ if (in != NULL) {
+ for (;;) {
+ *len += fread((char *)buf + *len, 1, size - *len, in);
+ if (*len < size) break;
+ size = bythirds(size);
+ if (size == *len || (swap = realloc(buf, size)) == NULL) {
+ free(buf);
+ buf = NULL;
+ break;
+ }
+ buf = swap;
+ }
+ fclose(in);
+ }
+ return buf;
+}
+
+int main(int argc, char **argv)
+{
+ int ret, put = 0, fail = 0;
+ unsigned skip = 0;
+ char *arg, *name = NULL;
+ unsigned char *source = NULL, *dest;
+ size_t len = 0;
+ unsigned long sourcelen, destlen;
+
+ /* process arguments */
+ while (arg = *++argv, --argc)
+ if (arg[0] == '-') {
+ if (arg[1] == 'w' && arg[2] == 0)
+ put = 1;
+ else if (arg[1] == 'f' && arg[2] == 0)
+ fail = 1, put = 1;
+ else if (arg[1] >= '0' && arg[1] <= '9')
+ skip = (unsigned)atoi(arg + 1);
+ else {
+ fprintf(stderr, "invalid option %s\n", arg);
+ return 3;
+ }
+ }
+ else if (name != NULL) {
+ fprintf(stderr, "only one file name allowed\n");
+ return 3;
+ }
+ else
+ name = arg;
+ source = load(name, &len);
+ if (source == NULL) {
+ fprintf(stderr, "memory allocation failure\n");
+ return 4;
+ }
+ if (len == 0) {
+ fprintf(stderr, "could not read %s, or it was empty\n",
+ name == NULL ? "<stdin>" : name);
+ free(source);
+ return 3;
+ }
+ if (skip >= len) {
+ fprintf(stderr, "skip request of %d leaves no input\n", skip);
+ free(source);
+ return 3;
+ }
+
+ /* test inflate data with offset skip */
+ len -= skip;
+ sourcelen = (unsigned long)len;
+ ret = puff(NIL, &destlen, source + skip, &sourcelen);
+ if (ret)
+ fprintf(stderr, "puff() failed with return code %d\n", ret);
+ else {
+ fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+ if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+ len - sourcelen);
+ }
+
+ /* if requested, inflate again and write decompressd data to stdout */
+ if (put && ret == 0) {
+ if (fail)
+ destlen >>= 1;
+ dest = malloc(destlen);
+ if (dest == NULL) {
+ fprintf(stderr, "memory allocation failure\n");
+ free(source);
+ return 4;
+ }
+ puff(dest, &destlen, source + skip, &sourcelen);
+ SET_BINARY_MODE(stdout);
+ fwrite(dest, 1, destlen, stdout);
+ free(dest);
+ }
+
+ /* clean up */
+ free(source);
+ return ret;
+}
--- /dev/null
+#include <stdio.h>
+#include <stdlib.h>
+#include <windows.h>
+
+#include "zlib.h"
+
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+ R->HighPart = A.HighPart - B.HighPart;
+ if (A.LowPart >= B.LowPart)
+ R->LowPart = A.LowPart - B.LowPart;
+ else
+ {
+ R->LowPart = A.LowPart - B.LowPart;
+ R->HighPart --;
+ }
+}
+
+#ifdef _M_X64
+// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc
+unsigned __int64 __rdtsc(void);
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ // printf("rdtsc = %I64x\n",__rdtsc());
+ pbeginTime64->QuadPart=__rdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER LIres;
+ unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+ LIres.QuadPart=res;
+ // printf("rdtsc = %I64x\n",__rdtsc());
+ return LIres;
+}
+#else
+#ifdef _M_IX86
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+ DWORD dwEdx,dwEax;
+ _asm
+ {
+ rdtsc
+ mov dwEax,eax
+ mov dwEdx,edx
+ }
+ pbeginTime64->LowPart=dwEax;
+ pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER LIres,endTime64;
+ myGetRDTSC32(&endTime64);
+
+ LIres.LowPart=LIres.HighPart=0;
+ MyDoMinus64(&LIres,endTime64,beginTime64);
+ return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER lr;
+ lr.QuadPart=0;
+ return lr;
+}
+#endif
+#endif
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+ if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+ {
+ pbeginTime64->LowPart = GetTickCount();
+ pbeginTime64->HighPart = 0;
+ }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+ DWORDLONG ticksShifted,tickSecShifted;
+ DWORD dwLog=16+0;
+ DWORD dwRet;
+ if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+ dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+ else
+ {
+ MyDoMinus64(&ticks,endTime64,beginTime64);
+ QueryPerformanceFrequency(&ticksPerSecond);
+
+
+ {
+ ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+ tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+
+ }
+
+ dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+ dwRet *=1;
+ }
+ return dwRet;
+}
+
+int ReadFileMemory(const char* filename,long* plFileSize,unsigned char** pFilePtr)
+{
+ FILE* stream;
+ unsigned char* ptr;
+ int retVal=1;
+ stream=fopen(filename, "rb");
+ if (stream==NULL)
+ return 0;
+
+ fseek(stream,0,SEEK_END);
+
+ *plFileSize=ftell(stream);
+ fseek(stream,0,SEEK_SET);
+ ptr=malloc((*plFileSize)+1);
+ if (ptr==NULL)
+ retVal=0;
+ else
+ {
+ if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize))
+ retVal=0;
+ }
+ fclose(stream);
+ *pFilePtr=ptr;
+ return retVal;
+}
+
+int main(int argc, char *argv[])
+{
+ int BlockSizeCompress=0x8000;
+ int BlockSizeUncompress=0x8000;
+ int cprLevel=Z_DEFAULT_COMPRESSION ;
+ long lFileSize;
+ unsigned char* FilePtr;
+ long lBufferSizeCpr;
+ long lBufferSizeUncpr;
+ long lCompressedSize=0;
+ unsigned char* CprPtr;
+ unsigned char* UncprPtr;
+ long lSizeCpr,lSizeUncpr;
+ DWORD dwGetTick,dwMsecQP;
+ LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
+
+ if (argc<=1)
+ {
+ printf("run TestZlib <File> [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n");
+ return 0;
+ }
+
+ if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0)
+ {
+ printf("error reading %s\n",argv[1]);
+ return 1;
+ }
+ else printf("file %s read, %u bytes\n",argv[1],lFileSize);
+
+ if (argc>=3)
+ BlockSizeCompress=atol(argv[2]);
+
+ if (argc>=4)
+ BlockSizeUncompress=atol(argv[3]);
+
+ if (argc>=5)
+ cprLevel=(int)atol(argv[4]);
+
+ lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200;
+ lBufferSizeUncpr = lBufferSizeCpr;
+
+ CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
+
+ BeginCountPerfCounter(&li_qp,TRUE);
+ dwGetTick=GetTickCount();
+ BeginCountRdtsc(&li_rdtsc);
+ {
+ z_stream zcpr;
+ int ret=Z_OK;
+ long lOrigToDo = lFileSize;
+ long lOrigDone = 0;
+ int step=0;
+ memset(&zcpr,0,sizeof(z_stream));
+ deflateInit(&zcpr,cprLevel);
+
+ zcpr.next_in = FilePtr;
+ zcpr.next_out = CprPtr;
+
+
+ do
+ {
+ long all_read_before = zcpr.total_in;
+ zcpr.avail_in = min(lOrigToDo,BlockSizeCompress);
+ zcpr.avail_out = BlockSizeCompress;
+ ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH);
+ lOrigDone += (zcpr.total_in-all_read_before);
+ lOrigToDo -= (zcpr.total_in-all_read_before);
+ step++;
+ } while (ret==Z_OK);
+
+ lSizeCpr=zcpr.total_out;
+ deflateEnd(&zcpr);
+ dwGetTick=GetTickCount()-dwGetTick;
+ dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+ dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+ printf("total compress size = %u, in %u step\n",lSizeCpr,step);
+ printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+ printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+ printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+ }
+
+ CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+ UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+ BeginCountPerfCounter(&li_qp,TRUE);
+ dwGetTick=GetTickCount();
+ BeginCountRdtsc(&li_rdtsc);
+ {
+ z_stream zcpr;
+ int ret=Z_OK;
+ long lOrigToDo = lSizeCpr;
+ long lOrigDone = 0;
+ int step=0;
+ memset(&zcpr,0,sizeof(z_stream));
+ inflateInit(&zcpr);
+
+ zcpr.next_in = CprPtr;
+ zcpr.next_out = UncprPtr;
+
+
+ do
+ {
+ long all_read_before = zcpr.total_in;
+ zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress);
+ zcpr.avail_out = BlockSizeUncompress;
+ ret=inflate(&zcpr,Z_SYNC_FLUSH);
+ lOrigDone += (zcpr.total_in-all_read_before);
+ lOrigToDo -= (zcpr.total_in-all_read_before);
+ step++;
+ } while (ret==Z_OK);
+
+ lSizeUncpr=zcpr.total_out;
+ inflateEnd(&zcpr);
+ dwGetTick=GetTickCount()-dwGetTick;
+ dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+ dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+ printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
+ printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+ printf("uncpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+ printf("uncpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+ }
+
+ if (lSizeUncpr==lFileSize)
+ {
+ if (memcmp(FilePtr,UncprPtr,lFileSize)==0)
+ printf("compare ok\n");
+
+ }
+
+ return 0;
+}
--- /dev/null
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln
\ No newline at end of file
--- /dev/null
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o ../../libz.a
+ $(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+ $(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+ cd ../..; ./configure; make
+
+clean:
+ rm -f untgz untgz.o *~
--- /dev/null
+CC=cl
+CFLAGS=-MD
+
+untgz.exe: untgz.obj ..\..\zlib.lib
+ $(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib
+
+untgz.obj: untgz.c ..\..\zlib.h
+ $(CC) $(CFLAGS) -c -I..\.. untgz.c
+
+..\..\zlib.lib:
+ cd ..\..
+ $(MAKE) -f win32\makefile.msc
+ cd contrib\untgz
+
+clean:
+ -del untgz.obj
+ -del untgz.exe
--- /dev/null
+/*
+ * untgz.c -- Display contents and extract files from a gzip'd TAR file
+ *
+ * written by Pedro A. Aranda Gutierrez <paag@tid.es>
+ * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
+ * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+
+#include "zlib.h"
+
+#ifdef unix
+# include <unistd.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#ifdef WIN32
+#include <windows.h>
+# ifndef F_OK
+# define F_OK 0
+# endif
+# define mkdir(dirname,mode) _mkdir(dirname)
+# ifdef _MSC_VER
+# define access(path,mode) _access(path,mode)
+# define chmod(path,mode) _chmod(path,mode)
+# define strdup(str) _strdup(str)
+# endif
+#else
+# include <utime.h>
+#endif
+
+
+/* values used in typeflag field */
+
+#define REGTYPE '0' /* regular file */
+#define AREGTYPE '\0' /* regular file */
+#define LNKTYPE '1' /* link */
+#define SYMTYPE '2' /* reserved */
+#define CHRTYPE '3' /* character special */
+#define BLKTYPE '4' /* block special */
+#define DIRTYPE '5' /* directory */
+#define FIFOTYPE '6' /* FIFO special */
+#define CONTTYPE '7' /* reserved */
+
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K' /* long link name */
+#define GNUTYPE_LONGNAME 'L' /* long file name */
+#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */
+#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE 'S' /* sparse file */
+#define GNUTYPE_VOLHDR 'V' /* tape/volume header */
+
+
+/* tar header */
+
+#define BLOCKSIZE 512
+#define SHORTNAMESIZE 100
+
+struct tar_header
+{ /* byte offset */
+ char name[100]; /* 0 */
+ char mode[8]; /* 100 */
+ char uid[8]; /* 108 */
+ char gid[8]; /* 116 */
+ char size[12]; /* 124 */
+ char mtime[12]; /* 136 */
+ char chksum[8]; /* 148 */
+ char typeflag; /* 156 */
+ char linkname[100]; /* 157 */
+ char magic[6]; /* 257 */
+ char version[2]; /* 263 */
+ char uname[32]; /* 265 */
+ char gname[32]; /* 297 */
+ char devmajor[8]; /* 329 */
+ char devminor[8]; /* 337 */
+ char prefix[155]; /* 345 */
+ /* 500 */
+};
+
+union tar_buffer
+{
+ char buffer[BLOCKSIZE];
+ struct tar_header header;
+};
+
+struct attr_item
+{
+ struct attr_item *next;
+ char *fname;
+ int mode;
+ time_t time;
+};
+
+enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
+
+char *TGZfname OF((const char *));
+void TGZnotfound OF((const char *));
+
+int getoct OF((char *, int));
+char *strtime OF((time_t *));
+int setfiletime OF((char *, time_t));
+void push_attr OF((struct attr_item **, char *, int, time_t));
+void restore_attr OF((struct attr_item **));
+
+int ExprMatch OF((char *, char *));
+
+int makedir OF((char *));
+int matchname OF((int, int, char **, char *));
+
+void error OF((const char *));
+int tar OF((gzFile, int, int, int, char **));
+
+void help OF((int));
+int main OF((int, char **));
+
+char *prog;
+
+const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL };
+
+/* return the file name of the TGZ archive */
+/* or NULL if it does not exist */
+
+char *TGZfname (const char *arcname)
+{
+ static char buffer[1024];
+ int origlen,i;
+
+ strcpy(buffer,arcname);
+ origlen = strlen(buffer);
+
+ for (i=0; TGZsuffix[i]; i++)
+ {
+ strcpy(buffer+origlen,TGZsuffix[i]);
+ if (access(buffer,F_OK) == 0)
+ return buffer;
+ }
+ return NULL;
+}
+
+
+/* error message for the filename */
+
+void TGZnotfound (const char *arcname)
+{
+ int i;
+
+ fprintf(stderr,"%s: Couldn't find ",prog);
+ for (i=0;TGZsuffix[i];i++)
+ fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n",
+ arcname,
+ TGZsuffix[i]);
+ exit(1);
+}
+
+
+/* convert octal digits to int */
+/* on error return -1 */
+
+int getoct (char *p,int width)
+{
+ int result = 0;
+ char c;
+
+ while (width--)
+ {
+ c = *p++;
+ if (c == 0)
+ break;
+ if (c == ' ')
+ continue;
+ if (c < '0' || c > '7')
+ return -1;
+ result = result * 8 + (c - '0');
+ }
+ return result;
+}
+
+
+/* convert time_t to string */
+/* use the "YYYY/MM/DD hh:mm:ss" format */
+
+char *strtime (time_t *t)
+{
+ struct tm *local;
+ static char result[32];
+
+ local = localtime(t);
+ sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d",
+ local->tm_year+1900, local->tm_mon+1, local->tm_mday,
+ local->tm_hour, local->tm_min, local->tm_sec);
+ return result;
+}
+
+
+/* set file time */
+
+int setfiletime (char *fname,time_t ftime)
+{
+#ifdef WIN32
+ static int isWinNT = -1;
+ SYSTEMTIME st;
+ FILETIME locft, modft;
+ struct tm *loctm;
+ HANDLE hFile;
+ int result;
+
+ loctm = localtime(&ftime);
+ if (loctm == NULL)
+ return -1;
+
+ st.wYear = (WORD)loctm->tm_year + 1900;
+ st.wMonth = (WORD)loctm->tm_mon + 1;
+ st.wDayOfWeek = (WORD)loctm->tm_wday;
+ st.wDay = (WORD)loctm->tm_mday;
+ st.wHour = (WORD)loctm->tm_hour;
+ st.wMinute = (WORD)loctm->tm_min;
+ st.wSecond = (WORD)loctm->tm_sec;
+ st.wMilliseconds = 0;
+ if (!SystemTimeToFileTime(&st, &locft) ||
+ !LocalFileTimeToFileTime(&locft, &modft))
+ return -1;
+
+ if (isWinNT < 0)
+ isWinNT = (GetVersion() < 0x80000000) ? 1 : 0;
+ hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING,
+ (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0),
+ NULL);
+ if (hFile == INVALID_HANDLE_VALUE)
+ return -1;
+ result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1;
+ CloseHandle(hFile);
+ return result;
+#else
+ struct utimbuf settime;
+
+ settime.actime = settime.modtime = ftime;
+ return utime(fname,&settime);
+#endif
+}
+
+
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+ struct attr_item *item;
+
+ item = (struct attr_item *)malloc(sizeof(struct attr_item));
+ if (item == NULL)
+ error("Out of memory");
+ item->fname = strdup(fname);
+ item->mode = mode;
+ item->time = time;
+ item->next = *list;
+ *list = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+ struct attr_item *item, *prev;
+
+ for (item = *list; item != NULL; )
+ {
+ setfiletime(item->fname,item->time);
+ chmod(item->fname,item->mode);
+ prev = item;
+ item = item->next;
+ free(prev);
+ }
+ *list = NULL;
+}
+
+
+/* match regular expression */
+
+#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
+
+int ExprMatch (char *string,char *expr)
+{
+ while (1)
+ {
+ if (ISSPECIAL(*expr))
+ {
+ if (*expr == '/')
+ {
+ if (*string != '\\' && *string != '/')
+ return 0;
+ string ++; expr++;
+ }
+ else if (*expr == '*')
+ {
+ if (*expr ++ == 0)
+ return 1;
+ while (*++string != *expr)
+ if (*string == 0)
+ return 0;
+ }
+ }
+ else
+ {
+ if (*string != *expr)
+ return 0;
+ if (*expr++ == 0)
+ return 1;
+ string++;
+ }
+ }
+}
+
+
+/* recursive mkdir */
+/* abort on ENOENT; ignore other errors like "directory already exists" */
+/* return 1 if OK */
+/* 0 on error */
+
+int makedir (char *newdir)
+{
+ char *buffer = strdup(newdir);
+ char *p;
+ int len = strlen(buffer);
+
+ if (len <= 0) {
+ free(buffer);
+ return 0;
+ }
+ if (buffer[len-1] == '/') {
+ buffer[len-1] = '\0';
+ }
+ if (mkdir(buffer, 0755) == 0)
+ {
+ free(buffer);
+ return 1;
+ }
+
+ p = buffer+1;
+ while (1)
+ {
+ char hold;
+
+ while(*p && *p != '\\' && *p != '/')
+ p++;
+ hold = *p;
+ *p = 0;
+ if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT))
+ {
+ fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer);
+ free(buffer);
+ return 0;
+ }
+ if (hold == 0)
+ break;
+ *p++ = hold;
+ }
+ free(buffer);
+ return 1;
+}
+
+
+int matchname (int arg,int argc,char **argv,char *fname)
+{
+ if (arg == argc) /* no arguments given (untgz tgzarchive) */
+ return 1;
+
+ while (arg < argc)
+ if (ExprMatch(fname,argv[arg++]))
+ return 1;
+
+ return 0; /* ignore this for the moment being */
+}
+
+
+/* tar file list or extract */
+
+int tar (gzFile in,int action,int arg,int argc,char **argv)
+{
+ union tar_buffer buffer;
+ int len;
+ int err;
+ int getheader = 1;
+ int remaining = 0;
+ FILE *outfile = NULL;
+ char fname[BLOCKSIZE];
+ int tarmode;
+ time_t tartime;
+ struct attr_item *attributes = NULL;
+
+ if (action == TGZ_LIST)
+ printf(" date time size file\n"
+ " ---------- -------- --------- -------------------------------------\n");
+ while (1)
+ {
+ len = gzread(in, &buffer, BLOCKSIZE);
+ if (len < 0)
+ error(gzerror(in, &err));
+ /*
+ * Always expect complete blocks to process
+ * the tar information.
+ */
+ if (len != BLOCKSIZE)
+ {
+ action = TGZ_INVALID; /* force error exit */
+ remaining = 0; /* force I/O cleanup */
+ }
+
+ /*
+ * If we have to get a tar header
+ */
+ if (getheader >= 1)
+ {
+ /*
+ * if we met the end of the tar
+ * or the end-of-tar block,
+ * we are done
+ */
+ if (len == 0 || buffer.header.name[0] == 0)
+ break;
+
+ tarmode = getoct(buffer.header.mode,8);
+ tartime = (time_t)getoct(buffer.header.mtime,12);
+ if (tarmode == -1 || tartime == (time_t)-1)
+ {
+ buffer.header.name[0] = 0;
+ action = TGZ_INVALID;
+ }
+
+ if (getheader == 1)
+ {
+ strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+ if (fname[SHORTNAMESIZE-1] != 0)
+ fname[SHORTNAMESIZE] = 0;
+ }
+ else
+ {
+ /*
+ * The file name is longer than SHORTNAMESIZE
+ */
+ if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+ error("bad long name");
+ getheader = 1;
+ }
+
+ /*
+ * Act according to the type flag
+ */
+ switch (buffer.header.typeflag)
+ {
+ case DIRTYPE:
+ if (action == TGZ_LIST)
+ printf(" %s <dir> %s\n",strtime(&tartime),fname);
+ if (action == TGZ_EXTRACT)
+ {
+ makedir(fname);
+ push_attr(&attributes,fname,tarmode,tartime);
+ }
+ break;
+ case REGTYPE:
+ case AREGTYPE:
+ remaining = getoct(buffer.header.size,12);
+ if (remaining == -1)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ if (action == TGZ_LIST)
+ printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
+ else if (action == TGZ_EXTRACT)
+ {
+ if (matchname(arg,argc,argv,fname))
+ {
+ outfile = fopen(fname,"wb");
+ if (outfile == NULL) {
+ /* try creating directory */
+ char *p = strrchr(fname, '/');
+ if (p != NULL) {
+ *p = '\0';
+ makedir(fname);
+ *p = '/';
+ outfile = fopen(fname,"wb");
+ }
+ }
+ if (outfile != NULL)
+ printf("Extracting %s\n",fname);
+ else
+ fprintf(stderr, "%s: Couldn't create %s",prog,fname);
+ }
+ else
+ outfile = NULL;
+ }
+ getheader = 0;
+ break;
+ case GNUTYPE_LONGLINK:
+ case GNUTYPE_LONGNAME:
+ remaining = getoct(buffer.header.size,12);
+ if (remaining < 0 || remaining >= BLOCKSIZE)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ len = gzread(in, fname, BLOCKSIZE);
+ if (len < 0)
+ error(gzerror(in, &err));
+ if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ getheader = 2;
+ break;
+ default:
+ if (action == TGZ_LIST)
+ printf(" %s <---> %s\n",strtime(&tartime),fname);
+ break;
+ }
+ }
+ else
+ {
+ unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
+
+ if (outfile != NULL)
+ {
+ if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
+ {
+ fprintf(stderr,
+ "%s: Error writing %s -- skipping\n",prog,fname);
+ fclose(outfile);
+ outfile = NULL;
+ remove(fname);
+ }
+ }
+ remaining -= bytes;
+ }
+
+ if (remaining == 0)
+ {
+ getheader = 1;
+ if (outfile != NULL)
+ {
+ fclose(outfile);
+ outfile = NULL;
+ if (action != TGZ_INVALID)
+ push_attr(&attributes,fname,tarmode,tartime);
+ }
+ }
+
+ /*
+ * Abandon if errors are found
+ */
+ if (action == TGZ_INVALID)
+ {
+ error("broken archive");
+ break;
+ }
+ }
+
+ /*
+ * Restore file modes and time stamps
+ */
+ restore_attr(&attributes);
+
+ if (gzclose(in) != Z_OK)
+ error("failed gzclose");
+
+ return 0;
+}
+
+
+/* ============================================================ */
+
+void help(int exitval)
+{
+ printf("untgz version 0.2.1\n"
+ " using zlib version %s\n\n",
+ zlibVersion());
+ printf("Usage: untgz file.tgz extract all files\n"
+ " untgz file.tgz fname ... extract selected files\n"
+ " untgz -l file.tgz list archive contents\n"
+ " untgz -h display this help\n");
+ exit(exitval);
+}
+
+void error(const char *msg)
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+
+/* ============================================================ */
+
+#if defined(WIN32) && defined(__GNUC__)
+int _CRT_glob = 0; /* disable argument globbing in MinGW */
+#endif
+
+int main(int argc,char **argv)
+{
+ int action = TGZ_EXTRACT;
+ int arg = 1;
+ char *TGZfile;
+ gzFile *f;
+
+ prog = strrchr(argv[0],'\\');
+ if (prog == NULL)
+ {
+ prog = strrchr(argv[0],'/');
+ if (prog == NULL)
+ {
+ prog = strrchr(argv[0],':');
+ if (prog == NULL)
+ prog = argv[0];
+ else
+ prog++;
+ }
+ else
+ prog++;
+ }
+ else
+ prog++;
+
+ if (argc == 1)
+ help(0);
+
+ if (strcmp(argv[arg],"-l") == 0)
+ {
+ action = TGZ_LIST;
+ if (argc == ++arg)
+ help(0);
+ }
+ else if (strcmp(argv[arg],"-h") == 0)
+ {
+ help(0);
+ }
+
+ if ((TGZfile = TGZfname(argv[arg])) == NULL)
+ TGZnotfound(argv[arg]);
+
+ ++arg;
+ if ((action == TGZ_LIST) && (arg != argc))
+ help(1);
+
+/*
+ * Process the TGZ file
+ */
+ switch(action)
+ {
+ case TGZ_LIST:
+ case TGZ_EXTRACT:
+ f = gzopen(TGZfile,"rb");
+ if (f == NULL)
+ {
+ fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile);
+ return 1;
+ }
+ exit(tar(f, action, arg, argc, argv));
+ break;
+
+ default:
+ error("Unknown option");
+ exit(1);
+ }
+
+ return 0;
+}
--- /dev/null
+Building instructions for the DLL versions of Zlib 1.2.8
+========================================================
+
+This directory contains projects that build zlib and minizip using
+Microsoft Visual C++ 9.0/10.0.
+
+You don't need to build these projects yourself. You can download the
+binaries from:
+ http://www.winimage.com/zLibDll
+
+More information can be found at this site.
+
+
+
+
+
+Build instructions for Visual Studio 2008 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- Compile assembly code (with Visual Studio Command Prompt) by running:
+ bld_ml64.bat (in contrib\masmx64)
+ bld_ml32.bat (in contrib\masmx86)
+- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008
+- Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32"
+
+Build instructions for Visual Studio 2010 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010
+
+Build instructions for Visual Studio 2012 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- Open contrib\vstudio\vc11\zlibvc.sln with Microsoft Visual C++ 2012
+
+
+Important
+---------
+- To use zlibwapi.dll in your application, you must define the
+ macro ZLIB_WINAPI when compiling your application's source files.
+
+
+Additional notes
+----------------
+- This DLL, named zlibwapi.dll, is compatible to the old zlib.dll built
+ by Gilles Vollant from the zlib 1.1.x sources, and distributed at
+ http://www.winimage.com/zLibDll
+ It uses the WINAPI calling convention for the exported functions, and
+ includes the minizip functionality. If your application needs that
+ particular build of zlib.dll, you can rename zlibwapi.dll to zlib.dll.
+
+- The new DLL was renamed because there exist several incompatible
+ versions of zlib.dll on the Internet.
+
+- There is also an official DLL build of zlib, named zlib1.dll. This one
+ is exporting the functions using the CDECL convention. See the file
+ win32\DLL_FAQ.txt found in this zlib distribution.
+
+- There used to be a ZLIB_DLL macro in zlib 1.1.x, but now this symbol
+ has a slightly different effect. To avoid compatibility problems, do
+ not define it here.
+
+
+Gilles Vollant
+info@winimage.com
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694382A}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\miniunz.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{048af943-022b-4db6-beeb-a54c34774ee2}</UniqueIdentifier>
+ <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{c1d600d2-888f-4aea-b73e-8b0dd9befa0c}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{0844199a-966b-4f19-81db-1e0125e141b9}</UniqueIdentifier>
+ <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\miniunz.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\minizip.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{c0419b40-bf50-40da-b153-ff74215b79de}</UniqueIdentifier>
+ <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{bb87b070-735b-478e-92ce-7383abb2f36c}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{f46ab6a6-548f-43cb-ae96-681abb5bd5db}</UniqueIdentifier>
+ <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\minizip.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+ <RootNamespace>testzlib</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\testzlib\testzlib.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{c1f6a2e3-5da5-4955-8653-310d3efe05a9}</UniqueIdentifier>
+ <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{c2aaffdc-2c95-4d6f-8466-4bec5890af2c}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{c274fe07-05f2-461c-964b-f6341e4e7eb5}</UniqueIdentifier>
+ <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\compress.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\crc32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\deflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\infback.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inftrees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\testzlib\testzlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\trees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\uncompr.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\zutil.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694366A}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\testzlib\testzlib.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{fa61a89f-93fc-4c89-b29e-36224b7592f4}</UniqueIdentifier>
+ <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{d4b85da0-2ba2-4934-b57f-e2584e3848ee}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{e573e075-00bd-4a7d-bd67-a8cc9bfc5aca}</UniqueIdentifier>
+ <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\testzlib\testzlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+#include <windows.h>
+
+#define IDR_VERSION1 1
+IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+ FILEVERSION 1,2,8,0
+ PRODUCTVERSION 1,2,8,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_DOS_WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+
+ BEGIN
+ VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
+ VALUE "FileVersion", "1.2.8\0"
+ VALUE "InternalName", "zlib\0"
+ VALUE "OriginalFilename", "zlibwapi.dll\0"
+ VALUE "ProductName", "ZLib.DLL\0"
+ VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+ VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}</ProjectGuid>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\gzclose.c" />
+ <ClCompile Include="..\..\..\gzlib.c" />
+ <ClCompile Include="..\..\..\gzread.c" />
+ <ClCompile Include="..\..\..\gzwrite.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\minizip\ioapi.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\minizip\unzip.c" />
+ <ClCompile Include="..\..\minizip\zip.c" />
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{174213f6-7f66-4ae8-a3a8-a1e0a1e6ffdd}</UniqueIdentifier>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\compress.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\crc32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\deflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzclose.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzread.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzwrite.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\infback.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inftrees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\ioapi.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\trees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\uncompr.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\unzip.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\zip.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\zutil.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc">
+ <Filter>Source Files</Filter>
+ </ResourceCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def">
+ <Filter>Source Files</Filter>
+ </None>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+LIBRARY
+; zlib data compression and ZIP file I/O library
+
+VERSION 1.2.8
+
+EXPORTS
+ adler32 @1
+ compress @2
+ crc32 @3
+ deflate @4
+ deflateCopy @5
+ deflateEnd @6
+ deflateInit2_ @7
+ deflateInit_ @8
+ deflateParams @9
+ deflateReset @10
+ deflateSetDictionary @11
+ gzclose @12
+ gzdopen @13
+ gzerror @14
+ gzflush @15
+ gzopen @16
+ gzread @17
+ gzwrite @18
+ inflate @19
+ inflateEnd @20
+ inflateInit2_ @21
+ inflateInit_ @22
+ inflateReset @23
+ inflateSetDictionary @24
+ inflateSync @25
+ uncompress @26
+ zlibVersion @27
+ gzprintf @28
+ gzputc @29
+ gzgetc @30
+ gzseek @31
+ gzrewind @32
+ gztell @33
+ gzeof @34
+ gzsetparams @35
+ zError @36
+ inflateSyncPoint @37
+ get_crc_table @38
+ compress2 @39
+ gzputs @40
+ gzgets @41
+ inflateCopy @42
+ inflateBackInit_ @43
+ inflateBack @44
+ inflateBackEnd @45
+ compressBound @46
+ deflateBound @47
+ gzclearerr @48
+ gzungetc @49
+ zlibCompileFlags @50
+ deflatePrime @51
+ deflatePending @52
+
+ unzOpen @61
+ unzClose @62
+ unzGetGlobalInfo @63
+ unzGetCurrentFileInfo @64
+ unzGoToFirstFile @65
+ unzGoToNextFile @66
+ unzOpenCurrentFile @67
+ unzReadCurrentFile @68
+ unzOpenCurrentFile3 @69
+ unztell @70
+ unzeof @71
+ unzCloseCurrentFile @72
+ unzGetGlobalComment @73
+ unzStringFileNameCompare @74
+ unzLocateFile @75
+ unzGetLocalExtrafield @76
+ unzOpen2 @77
+ unzOpenCurrentFile2 @78
+ unzOpenCurrentFilePassword @79
+
+ zipOpen @80
+ zipOpenNewFileInZip @81
+ zipWriteInFileInZip @82
+ zipCloseFileInZip @83
+ zipClose @84
+ zipOpenNewFileInZip2 @86
+ zipCloseFileInZipRaw @87
+ zipOpen2 @88
+ zipOpenNewFileInZip3 @89
+
+ unzGetFilePos @100
+ unzGoToFilePos @101
+
+ fill_win32_filefunc @110
+
+; zlibwapi v1.2.4 added:
+ fill_win32_filefunc64 @111
+ fill_win32_filefunc64A @112
+ fill_win32_filefunc64W @113
+
+ unzOpen64 @120
+ unzOpen2_64 @121
+ unzGetGlobalInfo64 @122
+ unzGetCurrentFileInfo64 @124
+ unzGetCurrentFileZStreamPos64 @125
+ unztell64 @126
+ unzGetFilePos64 @127
+ unzGoToFilePos64 @128
+
+ zipOpen64 @130
+ zipOpen2_64 @131
+ zipOpenNewFileInZip64 @132
+ zipOpenNewFileInZip2_64 @133
+ zipOpenNewFileInZip3_64 @134
+ zipOpenNewFileInZip4_64 @135
+ zipCloseFileInZipRaw64 @136
+
+; zlib1 v1.2.4 added:
+ adler32_combine @140
+ crc32_combine @142
+ deflateSetHeader @144
+ deflateTune @145
+ gzbuffer @146
+ gzclose_r @147
+ gzclose_w @148
+ gzdirect @149
+ gzoffset @150
+ inflateGetHeader @156
+ inflateMark @157
+ inflatePrime @158
+ inflateReset2 @159
+ inflateUndermine @160
+
+; zlib1 v1.2.6 added:
+ gzgetc_ @161
+ inflateResetKeep @163
+ deflateResetKeep @164
+
+; zlib1 v1.2.7 added:
+ gzopen_w @165
+
+; zlib1 v1.2.8 added:
+ inflateGetDictionary @166
+ gzvprintf @167
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Itanium = Debug|Itanium
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Itanium = Release|Itanium
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium
+ ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32
+ ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{8FD826F8-3739-44E6-8CC8-997122E53B8D}</ProjectGuid>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">zlibwapid</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">zlibwapid</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">zlibwapi</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <SubSystem>Windows</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\gzclose.c" />
+ <ClCompile Include="..\..\..\gzlib.c" />
+ <ClCompile Include="..\..\..\gzread.c" />
+ <ClCompile Include="..\..\..\gzwrite.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\minizip\ioapi.c" />
+ <ClCompile Include="..\..\minizip\iowin32.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\minizip\unzip.c">
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\zip.c">
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\..\..\deflate.h" />
+ <ClInclude Include="..\..\..\infblock.h" />
+ <ClInclude Include="..\..\..\infcodes.h" />
+ <ClInclude Include="..\..\..\inffast.h" />
+ <ClInclude Include="..\..\..\inftrees.h" />
+ <ClInclude Include="..\..\..\infutil.h" />
+ <ClInclude Include="..\..\..\zconf.h" />
+ <ClInclude Include="..\..\..\zlib.h" />
+ <ClInclude Include="..\..\..\zutil.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{07934a85-8b61-443d-a0ee-b2eedb74f3cd}</UniqueIdentifier>
+ <Extensions>cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{1d99675b-433d-4a21-9e50-ed4ab8b19762}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;fi;fd</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{431c0958-fa71-44d0-9084-2d19d100c0cc}</UniqueIdentifier>
+ <Extensions>ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\compress.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\crc32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\deflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzclose.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzlib.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzread.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\gzwrite.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\infback.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inflate.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inftrees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\ioapi.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\iowin32.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\trees.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\uncompr.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\unzip.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\zip.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="..\..\..\zutil.c">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc">
+ <Filter>Source Files</Filter>
+ </ResourceCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def">
+ <Filter>Source Files</Filter>
+ </None>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\..\..\deflate.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\infblock.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\infcodes.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\inffast.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\inftrees.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\infutil.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\zconf.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\zlib.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\..\..\zutil.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694382A}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\miniunz.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)minizip.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\minizip\minizip.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+ <RootNamespace>testzlib</RootNamespace>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <ClCompile>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\testzlib\testzlib.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694366A}</ProjectGuid>
+ <Keyword>Win32Proj</Keyword>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>Unicode</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <CharacterSet>MultiByte</CharacterSet>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <TargetMachine>MachineX86</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MinimalRebuild>true</MinimalRebuild>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+ <SubSystem>Console</SubSystem>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>MaxSpeed</Optimization>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <OmitFramePointers>true</OmitFramePointers>
+ <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeader>
+ </PrecompiledHeader>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <WarningLevel>Level3</WarningLevel>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <Link>
+ <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <SubSystem>Console</SubSystem>
+ <OptimizeReferences>true</OptimizeReferences>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\testzlib\testzlib.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="zlibvc.vcxproj">
+ <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+#include <windows.h>
+
+#define IDR_VERSION1 1
+IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+ FILEVERSION 1,2,8,0
+ PRODUCTVERSION 1,2,8,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_DOS_WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+
+ BEGIN
+ VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
+ VALUE "FileVersion", "1.2.8\0"
+ VALUE "InternalName", "zlib\0"
+ VALUE "OriginalFilename", "zlibwapi.dll\0"
+ VALUE "ProductName", "ZLib.DLL\0"
+ VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+ VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}</ProjectGuid>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>StaticLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>OldStyle</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <Midl>
+ <TargetEnvironment>X64</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Lib>
+ <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </Lib>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\gzclose.c" />
+ <ClCompile Include="..\..\..\gzlib.c" />
+ <ClCompile Include="..\..\..\gzread.c" />
+ <ClCompile Include="..\..\..\gzwrite.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\minizip\ioapi.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\minizip\unzip.c" />
+ <ClCompile Include="..\..\minizip\zip.c" />
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+LIBRARY
+; zlib data compression and ZIP file I/O library
+
+VERSION 1.2.8
+
+EXPORTS
+ adler32 @1
+ compress @2
+ crc32 @3
+ deflate @4
+ deflateCopy @5
+ deflateEnd @6
+ deflateInit2_ @7
+ deflateInit_ @8
+ deflateParams @9
+ deflateReset @10
+ deflateSetDictionary @11
+ gzclose @12
+ gzdopen @13
+ gzerror @14
+ gzflush @15
+ gzopen @16
+ gzread @17
+ gzwrite @18
+ inflate @19
+ inflateEnd @20
+ inflateInit2_ @21
+ inflateInit_ @22
+ inflateReset @23
+ inflateSetDictionary @24
+ inflateSync @25
+ uncompress @26
+ zlibVersion @27
+ gzprintf @28
+ gzputc @29
+ gzgetc @30
+ gzseek @31
+ gzrewind @32
+ gztell @33
+ gzeof @34
+ gzsetparams @35
+ zError @36
+ inflateSyncPoint @37
+ get_crc_table @38
+ compress2 @39
+ gzputs @40
+ gzgets @41
+ inflateCopy @42
+ inflateBackInit_ @43
+ inflateBack @44
+ inflateBackEnd @45
+ compressBound @46
+ deflateBound @47
+ gzclearerr @48
+ gzungetc @49
+ zlibCompileFlags @50
+ deflatePrime @51
+ deflatePending @52
+
+ unzOpen @61
+ unzClose @62
+ unzGetGlobalInfo @63
+ unzGetCurrentFileInfo @64
+ unzGoToFirstFile @65
+ unzGoToNextFile @66
+ unzOpenCurrentFile @67
+ unzReadCurrentFile @68
+ unzOpenCurrentFile3 @69
+ unztell @70
+ unzeof @71
+ unzCloseCurrentFile @72
+ unzGetGlobalComment @73
+ unzStringFileNameCompare @74
+ unzLocateFile @75
+ unzGetLocalExtrafield @76
+ unzOpen2 @77
+ unzOpenCurrentFile2 @78
+ unzOpenCurrentFilePassword @79
+
+ zipOpen @80
+ zipOpenNewFileInZip @81
+ zipWriteInFileInZip @82
+ zipCloseFileInZip @83
+ zipClose @84
+ zipOpenNewFileInZip2 @86
+ zipCloseFileInZipRaw @87
+ zipOpen2 @88
+ zipOpenNewFileInZip3 @89
+
+ unzGetFilePos @100
+ unzGoToFilePos @101
+
+ fill_win32_filefunc @110
+
+; zlibwapi v1.2.4 added:
+ fill_win32_filefunc64 @111
+ fill_win32_filefunc64A @112
+ fill_win32_filefunc64W @113
+
+ unzOpen64 @120
+ unzOpen2_64 @121
+ unzGetGlobalInfo64 @122
+ unzGetCurrentFileInfo64 @124
+ unzGetCurrentFileZStreamPos64 @125
+ unztell64 @126
+ unzGetFilePos64 @127
+ unzGoToFilePos64 @128
+
+ zipOpen64 @130
+ zipOpen2_64 @131
+ zipOpenNewFileInZip64 @132
+ zipOpenNewFileInZip2_64 @133
+ zipOpenNewFileInZip3_64 @134
+ zipOpenNewFileInZip4_64 @135
+ zipCloseFileInZipRaw64 @136
+
+; zlib1 v1.2.4 added:
+ adler32_combine @140
+ crc32_combine @142
+ deflateSetHeader @144
+ deflateTune @145
+ gzbuffer @146
+ gzclose_r @147
+ gzclose_w @148
+ gzdirect @149
+ gzoffset @150
+ inflateGetHeader @156
+ inflateMark @157
+ inflatePrime @158
+ inflateReset2 @159
+ inflateUndermine @160
+
+; zlib1 v1.2.6 added:
+ gzgetc_ @161
+ inflateResetKeep @163
+ deflateResetKeep @164
+
+; zlib1 v1.2.7 added:
+ gzopen_w @165
+
+; zlib1 v1.2.8 added:
+ inflateGetDictionary @166
+ gzvprintf @167
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 2012
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Itanium = Debug|Itanium
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Itanium = Release|Itanium
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium
+ ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32
+ ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Itanium">
+ <Configuration>Debug</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Debug|x64">
+ <Configuration>Debug</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+ <Configuration>ReleaseWithoutAsm</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Itanium">
+ <Configuration>Release</Configuration>
+ <Platform>Itanium</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|x64">
+ <Configuration>Release</Configuration>
+ <Platform>x64</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{8FD826F8-3739-44E6-8CC8-997122E53B8D}</ProjectGuid>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ <CharacterSet>Unicode</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+ <ConfigurationType>DynamicLibrary</ConfigurationType>
+ <UseOfMfc>false</UseOfMfc>
+ <PlatformToolset>v110</PlatformToolset>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup>
+ <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+ <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+ <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+ <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+ <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+ <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+ <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">zlibwapi</TargetName>
+ <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">zlibwapi</TargetName>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Win32</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+ <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <RandomizedBaseAddress>false</RandomizedBaseAddress>
+ <DataExecutionPrevention>
+ </DataExecutionPrevention>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\contrib\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <Optimization>Disabled</Optimization>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>X64</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineX64</TargetMachine>
+ </Link>
+ <PreBuildEvent>
+ <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+ </PreBuildEvent>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+ <Midl>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <MkTypLibCompatible>true</MkTypLibCompatible>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <TargetEnvironment>Itanium</TargetEnvironment>
+ <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+ </Midl>
+ <ClCompile>
+ <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+ <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <StringPooling>true</StringPooling>
+ <ExceptionHandling>
+ </ExceptionHandling>
+ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+ <BufferSecurityCheck>false</BufferSecurityCheck>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+ <AssemblerOutput>All</AssemblerOutput>
+ <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+ <ObjectFileName>$(IntDir)</ObjectFileName>
+ <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+ <BrowseInformation>
+ </BrowseInformation>
+ <WarningLevel>Level3</WarningLevel>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ </ClCompile>
+ <ResourceCompile>
+ <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <Culture>0x040c</Culture>
+ </ResourceCompile>
+ <Link>
+ <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+ <SuppressStartupBanner>true</SuppressStartupBanner>
+ <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+ <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+ <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+ <GenerateMapFile>true</GenerateMapFile>
+ <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+ <SubSystem>Windows</SubSystem>
+ <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+ <TargetMachine>MachineIA64</TargetMachine>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <ClCompile Include="..\..\..\adler32.c" />
+ <ClCompile Include="..\..\..\compress.c" />
+ <ClCompile Include="..\..\..\crc32.c" />
+ <ClCompile Include="..\..\..\deflate.c" />
+ <ClCompile Include="..\..\..\gzclose.c" />
+ <ClCompile Include="..\..\..\gzlib.c" />
+ <ClCompile Include="..\..\..\gzread.c" />
+ <ClCompile Include="..\..\..\gzwrite.c" />
+ <ClCompile Include="..\..\..\infback.c" />
+ <ClCompile Include="..\..\masmx64\inffas8664.c">
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+ <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+ </ClCompile>
+ <ClCompile Include="..\..\..\inffast.c" />
+ <ClCompile Include="..\..\..\inflate.c" />
+ <ClCompile Include="..\..\..\inftrees.c" />
+ <ClCompile Include="..\..\minizip\ioapi.c" />
+ <ClCompile Include="..\..\minizip\iowin32.c" />
+ <ClCompile Include="..\..\..\trees.c" />
+ <ClCompile Include="..\..\..\uncompr.c" />
+ <ClCompile Include="..\..\minizip\unzip.c">
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <ClCompile Include="..\..\minizip\zip.c">
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+ <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+ </ClCompile>
+ <ClCompile Include="..\..\..\zutil.c" />
+ </ItemGroup>
+ <ItemGroup>
+ <ResourceCompile Include="zlib.rc" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="zlibvc.def" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="..\..\..\deflate.h" />
+ <ClInclude Include="..\..\..\infblock.h" />
+ <ClInclude Include="..\..\..\infcodes.h" />
+ <ClInclude Include="..\..\..\inffast.h" />
+ <ClInclude Include="..\..\..\inftrees.h" />
+ <ClInclude Include="..\..\..\infutil.h" />
+ <ClInclude Include="..\..\..\zconf.h" />
+ <ClInclude Include="..\..\..\zlib.h" />
+ <ClInclude Include="..\..\..\zutil.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9.00"
+ Name="miniunz"
+ ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+ Keyword="Win32Proj"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\minizip\miniunz.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9.00"
+ Name="minizip"
+ ProjectGUID="{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+ Keyword="Win32Proj"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\MiniZip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\MiniZip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\$(ConfigurationName)"
+ IntermediateDirectory="x64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\$(ConfigurationName)"
+ IntermediateDirectory="ia64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\$(ConfigurationName)"
+ IntermediateDirectory="x64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\$(ConfigurationName)"
+ IntermediateDirectory="ia64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\minizip\minizip.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9,00"
+ Name="testzlib"
+ ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+ RootNamespace="testzlib"
+ Keyword="Win32Proj"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerOutput="4"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx86\match686.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerOutput="4"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies=""
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx86\match686.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\testzlib\testzlib.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9.00"
+ Name="TestZlibDll"
+ ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+ Keyword="Win32Proj"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\testzlib\testzlib.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+#include <windows.h>
+
+#define IDR_VERSION1 1
+IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+ FILEVERSION 1,2,8,0
+ PRODUCTVERSION 1,2,8,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_DOS_WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+
+ BEGIN
+ VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
+ VALUE "FileVersion", "1.2.8\0"
+ VALUE "InternalName", "zlib\0"
+ VALUE "OriginalFilename", "zlibwapi.dll\0"
+ VALUE "ProductName", "ZLib.DLL\0"
+ VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+ VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9,00"
+ Name="zlibstat"
+ ProjectGUID="{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ ExceptionHandling="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ AdditionalDependencies="..\..\masmx86\match686.obj ..\..\masmx86\inffas32.obj "
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzclose.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzguts.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzlib.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzread.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzwrite.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c"
+ >
+ </File>
+ <File
+ RelativePath=".\zlib.rc"
+ >
+ </File>
+ <File
+ RelativePath=".\zlibvc.def"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+LIBRARY
+; zlib data compression and ZIP file I/O library
+
+VERSION 1.2.8
+
+EXPORTS
+ adler32 @1
+ compress @2
+ crc32 @3
+ deflate @4
+ deflateCopy @5
+ deflateEnd @6
+ deflateInit2_ @7
+ deflateInit_ @8
+ deflateParams @9
+ deflateReset @10
+ deflateSetDictionary @11
+ gzclose @12
+ gzdopen @13
+ gzerror @14
+ gzflush @15
+ gzopen @16
+ gzread @17
+ gzwrite @18
+ inflate @19
+ inflateEnd @20
+ inflateInit2_ @21
+ inflateInit_ @22
+ inflateReset @23
+ inflateSetDictionary @24
+ inflateSync @25
+ uncompress @26
+ zlibVersion @27
+ gzprintf @28
+ gzputc @29
+ gzgetc @30
+ gzseek @31
+ gzrewind @32
+ gztell @33
+ gzeof @34
+ gzsetparams @35
+ zError @36
+ inflateSyncPoint @37
+ get_crc_table @38
+ compress2 @39
+ gzputs @40
+ gzgets @41
+ inflateCopy @42
+ inflateBackInit_ @43
+ inflateBack @44
+ inflateBackEnd @45
+ compressBound @46
+ deflateBound @47
+ gzclearerr @48
+ gzungetc @49
+ zlibCompileFlags @50
+ deflatePrime @51
+ deflatePending @52
+
+ unzOpen @61
+ unzClose @62
+ unzGetGlobalInfo @63
+ unzGetCurrentFileInfo @64
+ unzGoToFirstFile @65
+ unzGoToNextFile @66
+ unzOpenCurrentFile @67
+ unzReadCurrentFile @68
+ unzOpenCurrentFile3 @69
+ unztell @70
+ unzeof @71
+ unzCloseCurrentFile @72
+ unzGetGlobalComment @73
+ unzStringFileNameCompare @74
+ unzLocateFile @75
+ unzGetLocalExtrafield @76
+ unzOpen2 @77
+ unzOpenCurrentFile2 @78
+ unzOpenCurrentFilePassword @79
+
+ zipOpen @80
+ zipOpenNewFileInZip @81
+ zipWriteInFileInZip @82
+ zipCloseFileInZip @83
+ zipClose @84
+ zipOpenNewFileInZip2 @86
+ zipCloseFileInZipRaw @87
+ zipOpen2 @88
+ zipOpenNewFileInZip3 @89
+
+ unzGetFilePos @100
+ unzGoToFilePos @101
+
+ fill_win32_filefunc @110
+
+; zlibwapi v1.2.4 added:
+ fill_win32_filefunc64 @111
+ fill_win32_filefunc64A @112
+ fill_win32_filefunc64W @113
+
+ unzOpen64 @120
+ unzOpen2_64 @121
+ unzGetGlobalInfo64 @122
+ unzGetCurrentFileInfo64 @124
+ unzGetCurrentFileZStreamPos64 @125
+ unztell64 @126
+ unzGetFilePos64 @127
+ unzGoToFilePos64 @128
+
+ zipOpen64 @130
+ zipOpen2_64 @131
+ zipOpenNewFileInZip64 @132
+ zipOpenNewFileInZip2_64 @133
+ zipOpenNewFileInZip3_64 @134
+ zipOpenNewFileInZip4_64 @135
+ zipCloseFileInZipRaw64 @136
+
+; zlib1 v1.2.4 added:
+ adler32_combine @140
+ crc32_combine @142
+ deflateSetHeader @144
+ deflateTune @145
+ gzbuffer @146
+ gzclose_r @147
+ gzclose_w @148
+ gzdirect @149
+ gzoffset @150
+ inflateGetHeader @156
+ inflateMark @157
+ inflatePrime @158
+ inflateReset2 @159
+ inflateUndermine @160
+
+; zlib1 v1.2.6 added:
+ gzgetc_ @161
+ inflateResetKeep @163
+ deflateResetKeep @164
+
+; zlib1 v1.2.7 added:
+ gzopen_w @165
+
+; zlib1 v1.2.8 added:
+ inflateGetDictionary @166
+ gzvprintf @167
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual Studio 2008
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestZlibDll", "testzlibdll.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Itanium = Debug|Itanium
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Itanium = Release|Itanium
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium
+ ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32
+ ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="9,00"
+ Name="zlibvc"
+ ProjectGUID="{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+ RootNamespace="zlibvc"
+ TargetFrameworkVersion="131072"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF"
+ ExceptionHandling="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\match686.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\match686.obj ..\..\masmx86\inffas32.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ RandomizedBaseAddress="1"
+ DataExecutionPrevention="0"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzclose.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzguts.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzlib.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzread.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\gzwrite.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\iowin32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath=".\zlib.rc"
+ >
+ </File>
+ <File
+ RelativePath=".\zlibvc.def"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;fi;fd"
+ >
+ <File
+ RelativePath="..\..\..\deflate.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infblock.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infcodes.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infutil.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zconf.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zlib.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
--- /dev/null
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors. This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+ Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+ protection on the static variables used to control the first-use generation
+ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+ first call get_crc_table() to initialize the tables before allowing more than
+ one thread to use crc32().
+
+ DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+# include <stdio.h>
+# ifndef DYNAMIC_CRC_TABLE
+# define DYNAMIC_CRC_TABLE
+# endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h" /* for STDC and FAR definitions */
+
+#define local static
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+# define BYFOUR
+#endif
+#ifdef BYFOUR
+ local unsigned long crc32_little OF((unsigned long,
+ const unsigned char FAR *, unsigned));
+ local unsigned long crc32_big OF((unsigned long,
+ const unsigned char FAR *, unsigned));
+# define TBLS 8
+#else
+# define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+ local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+ Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+ x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+ Polynomials over GF(2) are represented in binary, one bit per coefficient,
+ with the lowest powers in the most significant bit. Then adding polynomials
+ is just exclusive-or, and multiplying a polynomial by x is a right shift by
+ one. If we call the above polynomial p, and represent a byte as the
+ polynomial q, also with the lowest power in the most significant bit (so the
+ byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+ where a mod b means the remainder after dividing a by b.
+
+ This calculation is done using the shift-register method of multiplying and
+ taking the remainder. The register is initialized to zero, and for each
+ incoming bit, x^32 is added mod p to the register if the bit is a one (where
+ x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+ x (which is shifting right by one and adding x^32 mod p if the bit shifted
+ out is a one). We start with the highest power (least significant bit) of
+ q and repeat for all eight bits of q.
+
+ The first table is simply the CRC of all possible eight bit values. This is
+ all the information needed to generate CRCs on data a byte at a time for all
+ combinations of CRC register values and incoming bytes. The remaining tables
+ allow for word-at-a-time CRC calculation for both big-endian and little-
+ endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+ z_crc_t c;
+ int n, k;
+ z_crc_t poly; /* polynomial exclusive-or pattern */
+ /* terms of polynomial defining this crc (except x^32): */
+ static volatile int first = 1; /* flag to limit concurrent making */
+ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+ /* See if another task is already doing this (not thread-safe, but better
+ than nothing -- significantly reduces duration of vulnerability in
+ case the advice about DYNAMIC_CRC_TABLE is ignored) */
+ if (first) {
+ first = 0;
+
+ /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+ poly = 0;
+ for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+ poly |= (z_crc_t)1 << (31 - p[n]);
+
+ /* generate a crc for every 8-bit value */
+ for (n = 0; n < 256; n++) {
+ c = (z_crc_t)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[0][n] = c;
+ }
+
+#ifdef BYFOUR
+ /* generate crc for each value followed by one, two, and three zeros,
+ and then the byte reversal of those as well as the first table */
+ for (n = 0; n < 256; n++) {
+ c = crc_table[0][n];
+ crc_table[4][n] = ZSWAP32(c);
+ for (k = 1; k < 4; k++) {
+ c = crc_table[0][c & 0xff] ^ (c >> 8);
+ crc_table[k][n] = c;
+ crc_table[k + 4][n] = ZSWAP32(c);
+ }
+ }
+#endif /* BYFOUR */
+
+ crc_table_empty = 0;
+ }
+ else { /* not first */
+ /* wait for the other guy to finish (not efficient, but rare) */
+ while (crc_table_empty)
+ ;
+ }
+
+#ifdef MAKECRCH
+ /* write out CRC tables to crc32.h */
+ {
+ FILE *out;
+
+ out = fopen("crc32.h", "w");
+ if (out == NULL) return;
+ fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+ fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+ fprintf(out, "local const z_crc_t FAR ");
+ fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
+ write_table(out, crc_table[0]);
+# ifdef BYFOUR
+ fprintf(out, "#ifdef BYFOUR\n");
+ for (k = 1; k < 8; k++) {
+ fprintf(out, " },\n {\n");
+ write_table(out, crc_table[k]);
+ }
+ fprintf(out, "#endif\n");
+# endif /* BYFOUR */
+ fprintf(out, " }\n};\n");
+ fclose(out);
+ }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+ FILE *out;
+ const z_crc_t FAR *table;
+{
+ int n;
+
+ for (n = 0; n < 256; n++)
+ fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
+ (unsigned long)(table[n]),
+ n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+ return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ uInt len;
+{
+ if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+ if (sizeof(void *) == sizeof(ptrdiff_t)) {
+ z_crc_t endian;
+
+ endian = 1;
+ if (*((unsigned char *)(&endian)))
+ return crc32_little(crc, buf, len);
+ else
+ return crc32_big(crc, buf, len);
+ }
+#endif /* BYFOUR */
+ crc = crc ^ 0xffffffffUL;
+ while (len >= 8) {
+ DO8;
+ len -= 8;
+ }
+ if (len) do {
+ DO1;
+ } while (--len);
+ return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+ c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+ crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ unsigned len;
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = (z_crc_t)crc;
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOLIT32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOLIT4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+ c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+ crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ unsigned len;
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = ZSWAP32((z_crc_t)crc);
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ buf4--;
+ while (len >= 32) {
+ DOBIG32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOBIG4;
+ len -= 4;
+ }
+ buf4++;
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+ unsigned long *mat;
+ unsigned long vec;
+{
+ unsigned long sum;
+
+ sum = 0;
+ while (vec) {
+ if (vec & 1)
+ sum ^= *mat;
+ vec >>= 1;
+ mat++;
+ }
+ return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+ unsigned long *square;
+ unsigned long *mat;
+{
+ int n;
+
+ for (n = 0; n < GF2_DIM; n++)
+ square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ int n;
+ unsigned long row;
+ unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
+ unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
+
+ /* degenerate case (also disallow negative lengths) */
+ if (len2 <= 0)
+ return crc1;
+
+ /* put operator for one zero bit in odd */
+ odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
+ row = 1;
+ for (n = 1; n < GF2_DIM; n++) {
+ odd[n] = row;
+ row <<= 1;
+ }
+
+ /* put operator for two zero bits in even */
+ gf2_matrix_square(even, odd);
+
+ /* put operator for four zero bits in odd */
+ gf2_matrix_square(odd, even);
+
+ /* apply len2 zeros to crc1 (first square will put the operator for one
+ zero byte, eight zero bits, in even) */
+ do {
+ /* apply zeros operator for this bit of len2 */
+ gf2_matrix_square(even, odd);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(even, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ if (len2 == 0)
+ break;
+
+ /* another iteration of the loop with odd and even swapped */
+ gf2_matrix_square(odd, even);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(odd, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ } while (len2 != 0);
+
+ /* return combined crc */
+ crc1 ^= crc2;
+ return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
--- /dev/null
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+ {
+ 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+ 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+ 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+ 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+ 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+ 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+ 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+ 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+ 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+ 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+ 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+ 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+ 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+ 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+ 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+ 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+ 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+ 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+ 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+ 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+ 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+ 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+ 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+ 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+ 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+ 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+ 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+ 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+ 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+ 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+ 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+ 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+ 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+ 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+ 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+ 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+ 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+ 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+ 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+ 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+ 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+ 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+ 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+ 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+ 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+ 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+ 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+ 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+ 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+ 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+ 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+ 0x2d02ef8dUL
+#ifdef BYFOUR
+ },
+ {
+ 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+ 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+ 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+ 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+ 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+ 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+ 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+ 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+ 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+ 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+ 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+ 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+ 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+ 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+ 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+ 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+ 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+ 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+ 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+ 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+ 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+ 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+ 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+ 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+ 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+ 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+ 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+ 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+ 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+ 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+ 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+ 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+ 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+ 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+ 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+ 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+ 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+ 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+ 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+ 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+ 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+ 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+ 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+ 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+ 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+ 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+ 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+ 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+ 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+ 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+ 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+ 0x9324fd72UL
+ },
+ {
+ 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+ 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+ 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+ 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+ 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+ 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+ 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+ 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+ 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+ 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+ 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+ 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+ 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+ 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+ 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+ 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+ 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+ 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+ 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+ 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+ 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+ 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+ 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+ 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+ 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+ 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+ 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+ 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+ 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+ 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+ 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+ 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+ 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+ 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+ 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+ 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+ 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+ 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+ 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+ 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+ 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+ 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+ 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+ 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+ 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+ 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+ 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+ 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+ 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+ 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+ 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+ 0xbe9834edUL
+ },
+ {
+ 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+ 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+ 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+ 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+ 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+ 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+ 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+ 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+ 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+ 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+ 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+ 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+ 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+ 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+ 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+ 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+ 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+ 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+ 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+ 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+ 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+ 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+ 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+ 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+ 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+ 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+ 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+ 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+ 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+ 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+ 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+ 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+ 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+ 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+ 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+ 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+ 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+ 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+ 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+ 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+ 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+ 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+ 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+ 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+ 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+ 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+ 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+ 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+ 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+ 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+ 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+ 0xde0506f1UL
+ },
+ {
+ 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+ 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+ 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+ 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+ 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+ 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+ 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+ 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+ 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+ 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+ 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+ 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+ 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+ 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+ 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+ 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+ 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+ 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+ 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+ 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+ 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+ 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+ 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+ 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+ 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+ 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+ 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+ 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+ 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+ 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+ 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+ 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+ 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+ 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+ 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+ 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+ 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+ 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+ 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+ 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+ 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+ 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+ 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+ 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+ 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+ 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+ 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+ 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+ 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+ 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+ 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+ 0x8def022dUL
+ },
+ {
+ 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+ 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+ 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+ 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+ 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+ 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+ 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+ 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+ 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+ 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+ 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+ 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+ 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+ 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+ 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+ 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+ 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+ 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+ 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+ 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+ 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+ 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+ 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+ 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+ 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+ 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+ 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+ 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+ 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+ 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+ 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+ 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+ 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+ 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+ 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+ 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+ 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+ 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+ 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+ 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+ 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+ 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+ 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+ 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+ 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+ 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+ 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+ 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+ 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+ 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+ 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+ 0x72fd2493UL
+ },
+ {
+ 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+ 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+ 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+ 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+ 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+ 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+ 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+ 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+ 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+ 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+ 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+ 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+ 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+ 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+ 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+ 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+ 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+ 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+ 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+ 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+ 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+ 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+ 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+ 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+ 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+ 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+ 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+ 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+ 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+ 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+ 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+ 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+ 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+ 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+ 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+ 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+ 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+ 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+ 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+ 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+ 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+ 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+ 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+ 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+ 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+ 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+ 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+ 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+ 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+ 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+ 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+ 0xed3498beUL
+ },
+ {
+ 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+ 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+ 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+ 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+ 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+ 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+ 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+ 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+ 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+ 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+ 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+ 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+ 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+ 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+ 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+ 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+ 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+ 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+ 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+ 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+ 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+ 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+ 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+ 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+ 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+ 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+ 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+ 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+ 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+ 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+ 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+ 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+ 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+ 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+ 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+ 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+ 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+ 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+ 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+ 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+ 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+ 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+ 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+ 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+ 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+ 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+ 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+ 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+ 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+ 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+ 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+ 0xf10605deUL
+#endif
+ }
+};
--- /dev/null
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process depends on being able to identify portions
+ * of the input text which are identical to earlier input (within a
+ * sliding window trailing behind the input currently being processed).
+ *
+ * The most straightforward technique turns out to be the fastest for
+ * most input files: try all possible matches and select the longest.
+ * The key feature of this algorithm is that insertions into the string
+ * dictionary are very simple and thus fast, and deletions are avoided
+ * completely. Insertions are performed at each input character, whereas
+ * string matches are performed only when the previous match ends. So it
+ * is preferable to spend more time in matches to allow very fast string
+ * insertions and avoid deletions. The matching algorithm for small
+ * strings is inspired from that of Rabin & Karp. A brute force approach
+ * is used to find longer strings when a small match has been found.
+ * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ * (by Leonid Broukhis).
+ * A previous version of this file used a more sophisticated algorithm
+ * (by Fiala and Greene) which is guaranteed to run in linear amortized
+ * time, but has a larger average cost, uses more memory and is patented.
+ * However the F&G algorithm may be faster for some highly redundant
+ * files if the parameter max_chain_length (described below) is too large.
+ *
+ * ACKNOWLEDGEMENTS
+ *
+ * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ * I found it in 'freeze' written by Leonid Broukhis.
+ * Thanks to many people for bug reports and testing.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ * Available in http://tools.ietf.org/html/rfc1951
+ *
+ * A description of the Rabin and Karp algorithm is given in the book
+ * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ * Fiala,E.R., and Greene,D.H.
+ * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id$ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+ " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ * Function prototypes.
+ */
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast OF((deflate_state *s, int flush));
+#ifndef FASTEST
+local block_state deflate_slow OF((deflate_state *s, int flush));
+#endif
+local block_state deflate_rle OF((deflate_state *s, int flush));
+local block_state deflate_huff OF((deflate_state *s, int flush));
+local void lm_init OF((deflate_state *s));
+local void putShortMSB OF((deflate_state *s, uInt b));
+local void flush_pending OF((z_streamp strm));
+local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+ void match_init OF((void)); /* asm code initialization */
+ uInt longest_match OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local void check_match OF((deflate_state *s, IPos start, IPos match,
+ int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+# define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+ ush good_length; /* reduce lazy search above this match length */
+ ush max_lazy; /* do not perform lazy search above this match length */
+ ush nice_length; /* quit search above this match length */
+ ush max_chain;
+ compress_func func;
+} config;
+
+#ifdef FASTEST
+local const config configuration_table[2] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
+#else
+local const config configuration_table[10] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
+/* 2 */ {4, 5, 16, 8, deflate_fast},
+/* 3 */ {4, 6, 32, 32, deflate_fast},
+
+/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
+/* 5 */ {8, 16, 32, 32, deflate_slow},
+/* 6 */ {8, 16, 128, 128, deflate_slow},
+/* 7 */ {8, 32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
+#endif
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+#ifndef NO_DUMMY_DECL
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+#endif
+
+/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
+#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of str are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+ s->head[s->hash_size-1] = NIL; \
+ zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+ z_streamp strm;
+ int level;
+ const char *version;
+ int stream_size;
+{
+ return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+ Z_DEFAULT_STRATEGY, version, stream_size);
+ /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ version, stream_size)
+ z_streamp strm;
+ int level;
+ int method;
+ int windowBits;
+ int memLevel;
+ int strategy;
+ const char *version;
+ int stream_size;
+{
+ deflate_state *s;
+ int wrap = 1;
+ static const char my_version[] = ZLIB_VERSION;
+
+ ushf *overlay;
+ /* We overlay pending_buf and d_buf+l_buf. This works since the average
+ * output size for (length,distance) codes is <= 24 bits.
+ */
+
+ if (version == Z_NULL || version[0] != my_version[0] ||
+ stream_size != sizeof(z_stream)) {
+ return Z_VERSION_ERROR;
+ }
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+ strm->msg = Z_NULL;
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+
+ if (windowBits < 0) { /* suppress zlib wrapper */
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+#ifdef GZIP
+ else if (windowBits > 15) {
+ wrap = 2; /* write gzip wrapper instead */
+ windowBits -= 16;
+ }
+#endif
+ if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+ windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+ strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
+ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+ if (s == Z_NULL) return Z_MEM_ERROR;
+ strm->state = (struct internal_state FAR *)s;
+ s->strm = strm;
+
+ s->wrap = wrap;
+ s->gzhead = Z_NULL;
+ s->w_bits = windowBits;
+ s->w_size = 1 << s->w_bits;
+ s->w_mask = s->w_size - 1;
+
+ s->hash_bits = memLevel + 7;
+ s->hash_size = 1 << s->hash_bits;
+ s->hash_mask = s->hash_size - 1;
+ s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+ s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+ s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
+ s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+ s->high_water = 0; /* nothing written to s->window yet */
+
+ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+ s->pending_buf = (uchf *) overlay;
+ s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+ if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+ s->pending_buf == Z_NULL) {
+ s->status = FINISH_STATE;
+ strm->msg = ERR_MSG(Z_MEM_ERROR);
+ deflateEnd (strm);
+ return Z_MEM_ERROR;
+ }
+ s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+ s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+ s->level = level;
+ s->strategy = strategy;
+ s->method = (Byte)method;
+
+ return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+ z_streamp strm;
+ const Bytef *dictionary;
+ uInt dictLength;
+{
+ deflate_state *s;
+ uInt str, n;
+ int wrap;
+ unsigned avail;
+ z_const unsigned char *next;
+
+ if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
+ return Z_STREAM_ERROR;
+ s = strm->state;
+ wrap = s->wrap;
+ if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
+ return Z_STREAM_ERROR;
+
+ /* when using zlib wrappers, compute Adler-32 for provided dictionary */
+ if (wrap == 1)
+ strm->adler = adler32(strm->adler, dictionary, dictLength);
+ s->wrap = 0; /* avoid computing Adler-32 in read_buf */
+
+ /* if dictionary would fill window, just replace the history */
+ if (dictLength >= s->w_size) {
+ if (wrap == 0) { /* already empty otherwise */
+ CLEAR_HASH(s);
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->insert = 0;
+ }
+ dictionary += dictLength - s->w_size; /* use the tail */
+ dictLength = s->w_size;
+ }
+
+ /* insert dictionary into window and hash */
+ avail = strm->avail_in;
+ next = strm->next_in;
+ strm->avail_in = dictLength;
+ strm->next_in = (z_const Bytef *)dictionary;
+ fill_window(s);
+ while (s->lookahead >= MIN_MATCH) {
+ str = s->strstart;
+ n = s->lookahead - (MIN_MATCH-1);
+ do {
+ UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+ s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+ s->head[s->ins_h] = (Pos)str;
+ str++;
+ } while (--n);
+ s->strstart = str;
+ s->lookahead = MIN_MATCH-1;
+ fill_window(s);
+ }
+ s->strstart += s->lookahead;
+ s->block_start = (long)s->strstart;
+ s->insert = s->lookahead;
+ s->lookahead = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ strm->next_in = next;
+ strm->avail_in = avail;
+ s->wrap = wrap;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateResetKeep (strm)
+ z_streamp strm;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+ return Z_STREAM_ERROR;
+ }
+
+ strm->total_in = strm->total_out = 0;
+ strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+ strm->data_type = Z_UNKNOWN;
+
+ s = (deflate_state *)strm->state;
+ s->pending = 0;
+ s->pending_out = s->pending_buf;
+
+ if (s->wrap < 0) {
+ s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
+ }
+ s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+ strm->adler =
+#ifdef GZIP
+ s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
+#endif
+ adler32(0L, Z_NULL, 0);
+ s->last_flush = Z_NO_FLUSH;
+
+ _tr_init(s);
+
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+ z_streamp strm;
+{
+ int ret;
+
+ ret = deflateResetKeep(strm);
+ if (ret == Z_OK)
+ lm_init(strm->state);
+ return ret;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+ z_streamp strm;
+ gz_headerp head;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+ strm->state->gzhead = head;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+ unsigned *pending;
+ int *bits;
+ z_streamp strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (pending != Z_NULL)
+ *pending = strm->state->pending;
+ if (bits != Z_NULL)
+ *bits = strm->state->bi_valid;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePrime (strm, bits, value)
+ z_streamp strm;
+ int bits;
+ int value;
+{
+ deflate_state *s;
+ int put;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
+ return Z_BUF_ERROR;
+ do {
+ put = Buf_size - s->bi_valid;
+ if (put > bits)
+ put = bits;
+ s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
+ s->bi_valid += put;
+ _tr_flush_bits(s);
+ value >>= put;
+ bits -= put;
+ } while (bits);
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+ z_streamp strm;
+ int level;
+ int strategy;
+{
+ deflate_state *s;
+ compress_func func;
+ int err = Z_OK;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ func = configuration_table[s->level].func;
+
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ strm->total_in != 0) {
+ /* Flush the last buffer: */
+ err = deflate(strm, Z_BLOCK);
+ if (err == Z_BUF_ERROR && s->pending == 0)
+ err = Z_OK;
+ }
+ if (s->level != level) {
+ s->level = level;
+ s->max_lazy_match = configuration_table[level].max_lazy;
+ s->good_match = configuration_table[level].good_length;
+ s->nice_match = configuration_table[level].nice_length;
+ s->max_chain_length = configuration_table[level].max_chain;
+ }
+ s->strategy = strategy;
+ return err;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+ z_streamp strm;
+ int good_length;
+ int max_lazy;
+ int nice_length;
+ int max_chain;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ s->good_match = good_length;
+ s->max_lazy_match = max_lazy;
+ s->nice_match = nice_length;
+ s->max_chain_length = max_chain;
+ return Z_OK;
+}
+
+/* =========================================================================
+ * For the default windowBits of 15 and memLevel of 8, this function returns
+ * a close to exact, as well as small, upper bound on the compressed size.
+ * They are coded as constants here for a reason--if the #define's are
+ * changed, then this function needs to be changed as well. The return
+ * value for 15 and 8 only works for those exact settings.
+ *
+ * For any setting other than those defaults for windowBits and memLevel,
+ * the value returned is a conservative worst case for the maximum expansion
+ * resulting from using fixed blocks instead of stored blocks, which deflate
+ * can emit on compressed data for some combinations of the parameters.
+ *
+ * This function could be more sophisticated to provide closer upper bounds for
+ * every combination of windowBits and memLevel. But even the conservative
+ * upper bound of about 14% expansion does not seem onerous for output buffer
+ * allocation.
+ */
+uLong ZEXPORT deflateBound(strm, sourceLen)
+ z_streamp strm;
+ uLong sourceLen;
+{
+ deflate_state *s;
+ uLong complen, wraplen;
+ Bytef *str;
+
+ /* conservative upper bound for compressed data */
+ complen = sourceLen +
+ ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
+
+ /* if can't get parameters, return conservative bound plus zlib wrapper */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return complen + 6;
+
+ /* compute wrapper length */
+ s = strm->state;
+ switch (s->wrap) {
+ case 0: /* raw deflate */
+ wraplen = 0;
+ break;
+ case 1: /* zlib wrapper */
+ wraplen = 6 + (s->strstart ? 4 : 0);
+ break;
+ case 2: /* gzip wrapper */
+ wraplen = 18;
+ if (s->gzhead != Z_NULL) { /* user-supplied gzip header */
+ if (s->gzhead->extra != Z_NULL)
+ wraplen += 2 + s->gzhead->extra_len;
+ str = s->gzhead->name;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ str = s->gzhead->comment;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ if (s->gzhead->hcrc)
+ wraplen += 2;
+ }
+ break;
+ default: /* for compiler happiness */
+ wraplen = 6;
+ }
+
+ /* if not default parameters, return conservative bound */
+ if (s->w_bits != 15 || s->hash_bits != 8 + 7)
+ return complen + wraplen;
+
+ /* default settings: return tight bound for that case */
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+ (sourceLen >> 25) + 13 - 6 + wraplen;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+ deflate_state *s;
+ uInt b;
+{
+ put_byte(s, (Byte)(b >> 8));
+ put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+ z_streamp strm;
+{
+ unsigned len;
+ deflate_state *s = strm->state;
+
+ _tr_flush_bits(s);
+ len = s->pending;
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ zmemcpy(strm->next_out, s->pending_out, len);
+ strm->next_out += len;
+ s->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ s->pending -= len;
+ if (s->pending == 0) {
+ s->pending_out = s->pending_buf;
+ }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+ z_streamp strm;
+ int flush;
+{
+ int old_flush; /* value of flush param for previous deflate call */
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ flush > Z_BLOCK || flush < 0) {
+ return Z_STREAM_ERROR;
+ }
+ s = strm->state;
+
+ if (strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+ (s->status == FINISH_STATE && flush != Z_FINISH)) {
+ ERR_RETURN(strm, Z_STREAM_ERROR);
+ }
+ if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+ s->strm = strm; /* just in case */
+ old_flush = s->last_flush;
+ s->last_flush = flush;
+
+ /* Write the header */
+ if (s->status == INIT_STATE) {
+#ifdef GZIP
+ if (s->wrap == 2) {
+ strm->adler = crc32(0L, Z_NULL, 0);
+ put_byte(s, 31);
+ put_byte(s, 139);
+ put_byte(s, 8);
+ if (s->gzhead == Z_NULL) {
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, OS_CODE);
+ s->status = BUSY_STATE;
+ }
+ else {
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
+ (s->gzhead->hcrc ? 2 : 0) +
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
+ );
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, s->gzhead->os & 0xff);
+ if (s->gzhead->extra != Z_NULL) {
+ put_byte(s, s->gzhead->extra_len & 0xff);
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+ }
+ if (s->gzhead->hcrc)
+ strm->adler = crc32(strm->adler, s->pending_buf,
+ s->pending);
+ s->gzindex = 0;
+ s->status = EXTRA_STATE;
+ }
+ }
+ else
+#endif
+ {
+ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+ uInt level_flags;
+
+ if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+ level_flags = 0;
+ else if (s->level < 6)
+ level_flags = 1;
+ else if (s->level == 6)
+ level_flags = 2;
+ else
+ level_flags = 3;
+ header |= (level_flags << 6);
+ if (s->strstart != 0) header |= PRESET_DICT;
+ header += 31 - (header % 31);
+
+ s->status = BUSY_STATE;
+ putShortMSB(s, header);
+
+ /* Save the adler32 of the preset dictionary: */
+ if (s->strstart != 0) {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ strm->adler = adler32(0L, Z_NULL, 0);
+ }
+ }
+#ifdef GZIP
+ if (s->status == EXTRA_STATE) {
+ if (s->gzhead->extra != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size)
+ break;
+ }
+ put_byte(s, s->gzhead->extra[s->gzindex]);
+ s->gzindex++;
+ }
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (s->gzindex == s->gzhead->extra_len) {
+ s->gzindex = 0;
+ s->status = NAME_STATE;
+ }
+ }
+ else
+ s->status = NAME_STATE;
+ }
+ if (s->status == NAME_STATE) {
+ if (s->gzhead->name != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->name[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0) {
+ s->gzindex = 0;
+ s->status = COMMENT_STATE;
+ }
+ }
+ else
+ s->status = COMMENT_STATE;
+ }
+ if (s->status == COMMENT_STATE) {
+ if (s->gzhead->comment != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->comment[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0)
+ s->status = HCRC_STATE;
+ }
+ else
+ s->status = HCRC_STATE;
+ }
+ if (s->status == HCRC_STATE) {
+ if (s->gzhead->hcrc) {
+ if (s->pending + 2 > s->pending_buf_size)
+ flush_pending(strm);
+ if (s->pending + 2 <= s->pending_buf_size) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ strm->adler = crc32(0L, Z_NULL, 0);
+ s->status = BUSY_STATE;
+ }
+ }
+ else
+ s->status = BUSY_STATE;
+ }
+#endif
+
+ /* Flush as much pending output as possible */
+ if (s->pending != 0) {
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ /* Since avail_out is 0, deflate will be called again with
+ * more output space, but possibly with both pending and
+ * avail_in equal to zero. There won't be anything to do,
+ * but this is not an error situation so make sure we
+ * return OK instead of BUF_ERROR at next call of deflate:
+ */
+ s->last_flush = -1;
+ return Z_OK;
+ }
+
+ /* Make sure there is something to do and avoid duplicate consecutive
+ * flushes. For repeated and useless calls with Z_FINISH, we keep
+ * returning Z_STREAM_END instead of Z_BUF_ERROR.
+ */
+ } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
+ flush != Z_FINISH) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* User must not provide more input after the first FINISH: */
+ if (s->status == FINISH_STATE && strm->avail_in != 0) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* Start a new block or continue the current one.
+ */
+ if (strm->avail_in != 0 || s->lookahead != 0 ||
+ (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+ block_state bstate;
+
+ bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+ (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+ (*(configuration_table[s->level].func))(s, flush));
+
+ if (bstate == finish_started || bstate == finish_done) {
+ s->status = FINISH_STATE;
+ }
+ if (bstate == need_more || bstate == finish_started) {
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+ }
+ return Z_OK;
+ /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+ * of deflate should use the same flush parameter to make sure
+ * that the flush is complete. So we don't have to output an
+ * empty block here, this will be done at next call. This also
+ * ensures that for a very small output buffer, we emit at most
+ * one empty block.
+ */
+ }
+ if (bstate == block_done) {
+ if (flush == Z_PARTIAL_FLUSH) {
+ _tr_align(s);
+ } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
+ _tr_stored_block(s, (char*)0, 0L, 0);
+ /* For a full flush, this empty block will be recognized
+ * as a special marker by inflate_sync().
+ */
+ if (flush == Z_FULL_FLUSH) {
+ CLEAR_HASH(s); /* forget history */
+ if (s->lookahead == 0) {
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->insert = 0;
+ }
+ }
+ }
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+ return Z_OK;
+ }
+ }
+ }
+ Assert(strm->avail_out > 0, "bug2");
+
+ if (flush != Z_FINISH) return Z_OK;
+ if (s->wrap <= 0) return Z_STREAM_END;
+
+ /* Write the trailer */
+#ifdef GZIP
+ if (s->wrap == 2) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
+ put_byte(s, (Byte)(strm->total_in & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
+ }
+ else
+#endif
+ {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ flush_pending(strm);
+ /* If avail_out is zero, the application will call deflate again
+ * to flush the rest.
+ */
+ if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
+ return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+ z_streamp strm;
+{
+ int status;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+ status = strm->state->status;
+ if (status != INIT_STATE &&
+ status != EXTRA_STATE &&
+ status != NAME_STATE &&
+ status != COMMENT_STATE &&
+ status != HCRC_STATE &&
+ status != BUSY_STATE &&
+ status != FINISH_STATE) {
+ return Z_STREAM_ERROR;
+ }
+
+ /* Deallocate in reverse order of allocations: */
+ TRY_FREE(strm, strm->state->pending_buf);
+ TRY_FREE(strm, strm->state->head);
+ TRY_FREE(strm, strm->state->prev);
+ TRY_FREE(strm, strm->state->window);
+
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+
+ return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+ z_streamp dest;
+ z_streamp source;
+{
+#ifdef MAXSEG_64K
+ return Z_STREAM_ERROR;
+#else
+ deflate_state *ds;
+ deflate_state *ss;
+ ushf *overlay;
+
+
+ if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+ return Z_STREAM_ERROR;
+ }
+
+ ss = source->state;
+
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+
+ ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+ if (ds == Z_NULL) return Z_MEM_ERROR;
+ dest->state = (struct internal_state FAR *) ds;
+ zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
+ ds->strm = dest;
+
+ ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+ ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
+ ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
+ overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+ ds->pending_buf = (uchf *) overlay;
+
+ if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+ ds->pending_buf == Z_NULL) {
+ deflateEnd (dest);
+ return Z_MEM_ERROR;
+ }
+ /* following zmemcpy do not work for 16-bit MSDOS */
+ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+ zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
+ zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
+ zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+ ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+ ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+ ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+ ds->l_desc.dyn_tree = ds->dyn_ltree;
+ ds->d_desc.dyn_tree = ds->dyn_dtree;
+ ds->bl_desc.dyn_tree = ds->bl_tree;
+
+ return Z_OK;
+#endif /* MAXSEG_64K */
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read. All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+ z_streamp strm;
+ Bytef *buf;
+ unsigned size;
+{
+ unsigned len = strm->avail_in;
+
+ if (len > size) len = size;
+ if (len == 0) return 0;
+
+ strm->avail_in -= len;
+
+ zmemcpy(buf, strm->next_in, len);
+ if (strm->state->wrap == 1) {
+ strm->adler = adler32(strm->adler, buf, len);
+ }
+#ifdef GZIP
+ else if (strm->state->wrap == 2) {
+ strm->adler = crc32(strm->adler, buf, len);
+ }
+#endif
+ strm->next_in += len;
+ strm->total_in += len;
+
+ return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+ deflate_state *s;
+{
+ s->window_size = (ulg)2L*s->w_size;
+
+ CLEAR_HASH(s);
+
+ /* Set the default configuration parameters:
+ */
+ s->max_lazy_match = configuration_table[s->level].max_lazy;
+ s->good_match = configuration_table[s->level].good_length;
+ s->nice_match = configuration_table[s->level].nice_length;
+ s->max_chain_length = configuration_table[s->level].max_chain;
+
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->lookahead = 0;
+ s->insert = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ s->ins_h = 0;
+#ifndef FASTEST
+#ifdef ASMV
+ match_init(); /* initialize the asm code */
+#endif
+#endif
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ unsigned chain_length = s->max_chain_length;/* max hash chain length */
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ int best_len = s->prev_length; /* best match length so far */
+ int nice_match = s->nice_match; /* stop if match long enough */
+ IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+ s->strstart - (IPos)MAX_DIST(s) : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+ Posf *prev = s->prev;
+ uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+ /* Compare two bytes at a time. Note: this is not always beneficial.
+ * Try with and without -DUNALIGNED_OK to check.
+ */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+ register ush scan_start = *(ushf*)scan;
+ register ush scan_end = *(ushf*)(scan+best_len-1);
+#else
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+ register Byte scan_end1 = scan[best_len-1];
+ register Byte scan_end = scan[best_len];
+#endif
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ /* Do not waste too much time if we already have a good match: */
+ if (s->prev_length >= s->good_match) {
+ chain_length >>= 2;
+ }
+ /* Do not look for matches beyond the end of the input. This is necessary
+ * to make deflate deterministic.
+ */
+ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ do {
+ Assert(cur_match < s->strstart, "no future");
+ match = s->window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2. Note that the checks below
+ * for insufficient lookahead only occur occasionally for performance
+ * reasons. Therefore uninitialized memory will be accessed, and
+ * conditional jumps will be made that depend on those values.
+ * However the length of the match is limited to the lookahead, so
+ * the output of deflate is not affected by the uninitialized values.
+ */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+ /* This code assumes sizeof(unsigned short) == 2. Do not use
+ * UNALIGNED_OK if your compiler uses a different size.
+ */
+ if (*(ushf*)(match+best_len-1) != scan_end ||
+ *(ushf*)match != scan_start) continue;
+
+ /* It is not necessary to compare scan[2] and match[2] since they are
+ * always equal when the other bytes match, given that the hash keys
+ * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+ * strstart+3, +5, ... up to strstart+257. We check for insufficient
+ * lookahead only every 4th comparison; the 128th check will be made
+ * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+ * necessary to put more guard bytes at the end of the window, or
+ * to check more often for insufficient lookahead.
+ */
+ Assert(scan[2] == match[2], "scan[2]?");
+ scan++, match++;
+ do {
+ } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ scan < strend);
+ /* The funny "do {}" generates better code on most compilers */
+
+ /* Here, scan <= window+strstart+257 */
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+ if (*scan == *match) scan++;
+
+ len = (MAX_MATCH - 1) - (int)(strend-scan);
+ scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+ if (len > best_len) {
+ s->match_start = cur_match;
+ best_len = len;
+ if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+ scan_end = *(ushf*)(scan+best_len-1);
+#else
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+#endif
+ }
+ } while ((cur_match = prev[cur_match & wmask]) > limit
+ && --chain_length != 0);
+
+ if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+ return s->lookahead;
+}
+#endif /* ASMV */
+
+#else /* FASTEST */
+
+/* ---------------------------------------------------------------------------
+ * Optimized version for FASTEST only
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ Assert(cur_match < s->strstart, "no future");
+
+ match = s->window + cur_match;
+
+ /* Return failure if the match length is less than 2:
+ */
+ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match += 2;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+
+ if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+ s->match_start = cur_match;
+ return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
+}
+
+#endif /* FASTEST */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+ deflate_state *s;
+ IPos start, match;
+ int length;
+{
+ /* check that the match is indeed a match */
+ if (zmemcmp(s->window + match,
+ s->window + start, length) != EQUAL) {
+ fprintf(stderr, " start %u, match %u, length %d\n",
+ start, match, length);
+ do {
+ fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+ } while (--length != 0);
+ z_error("invalid match");
+ }
+ if (z_verbose > 1) {
+ fprintf(stderr,"\\[%d,%d]", start-match, length);
+ do { putc(s->window[start++], stderr); } while (--length != 0);
+ }
+}
+#else
+# define check_match(s, start, match, length)
+#endif /* DEBUG */
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or avail_in == 0; reads are
+ * performed for at least two bytes (required for the zip translate_eol
+ * option -- not supported here).
+ */
+local void fill_window(s)
+ deflate_state *s;
+{
+ register unsigned n, m;
+ register Posf *p;
+ unsigned more; /* Amount of free space at the end of the window. */
+ uInt wsize = s->w_size;
+
+ Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+ do {
+ more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+ /* Deal with !@#$% 64K limit: */
+ if (sizeof(int) <= 2) {
+ if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+ more = wsize;
+
+ } else if (more == (unsigned)(-1)) {
+ /* Very unlikely, but possible on 16 bit machine if
+ * strstart == 0 && lookahead == 1 (input done a byte at time)
+ */
+ more--;
+ }
+ }
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ if (s->strstart >= wsize+MAX_DIST(s)) {
+
+ zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+ s->match_start -= wsize;
+ s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
+ s->block_start -= (long) wsize;
+
+ /* Slide the hash table (could be avoided with 32 bit values
+ at the expense of memory usage). We slide even when level == 0
+ to keep the hash table consistent if we switch back to level > 0
+ later. (Using level 0 permanently is not an optimal usage of
+ zlib, so we don't care about this pathological case.)
+ */
+ n = s->hash_size;
+ p = &s->head[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ } while (--n);
+
+ n = wsize;
+#ifndef FASTEST
+ p = &s->prev[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ } while (--n);
+#endif
+ more += wsize;
+ }
+ if (s->strm->avail_in == 0) break;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the BIG_MEM or MMAP case (not yet supported),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(more >= 2, "more < 2");
+
+ n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+ s->lookahead += n;
+
+ /* Initialize the hash value now that we have some input: */
+ if (s->lookahead + s->insert >= MIN_MATCH) {
+ uInt str = s->strstart - s->insert;
+ s->ins_h = s->window[str];
+ UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ while (s->insert) {
+ UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+ s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+ s->head[s->ins_h] = (Pos)str;
+ str++;
+ s->insert--;
+ if (s->lookahead + s->insert < MIN_MATCH)
+ break;
+ }
+ }
+ /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+ * but this is not important since only literal bytes will be emitted.
+ */
+
+ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+ /* If the WIN_INIT bytes after the end of the current data have never been
+ * written, then zero those bytes in order to avoid memory check reports of
+ * the use of uninitialized (or uninitialised as Julian writes) bytes by
+ * the longest match routines. Update the high water mark for the next
+ * time through here. WIN_INIT is set to MAX_MATCH since the longest match
+ * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+ */
+ if (s->high_water < s->window_size) {
+ ulg curr = s->strstart + (ulg)(s->lookahead);
+ ulg init;
+
+ if (s->high_water < curr) {
+ /* Previous high water mark below current data -- zero WIN_INIT
+ * bytes or up to end of window, whichever is less.
+ */
+ init = s->window_size - curr;
+ if (init > WIN_INIT)
+ init = WIN_INIT;
+ zmemzero(s->window + curr, (unsigned)init);
+ s->high_water = curr + init;
+ }
+ else if (s->high_water < (ulg)curr + WIN_INIT) {
+ /* High water mark at or above current data, but below current data
+ * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+ * to end of window, whichever is less.
+ */
+ init = (ulg)curr + WIN_INIT - s->high_water;
+ if (init > s->window_size - s->high_water)
+ init = s->window_size - s->high_water;
+ zmemzero(s->window + s->high_water, (unsigned)init);
+ s->high_water += init;
+ }
+ }
+
+ Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+ "not enough room for search");
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, last) { \
+ _tr_flush_block(s, (s->block_start >= 0L ? \
+ (charf *)&s->window[(unsigned)s->block_start] : \
+ (charf *)Z_NULL), \
+ (ulg)((long)s->strstart - s->block_start), \
+ (last)); \
+ s->block_start = s->strstart; \
+ flush_pending(s->strm); \
+ Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, last) { \
+ FLUSH_BLOCK_ONLY(s, last); \
+ if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+ * to pending_buf_size, and each stored block has a 5 byte header:
+ */
+ ulg max_block_size = 0xffff;
+ ulg max_start;
+
+ if (max_block_size > s->pending_buf_size - 5) {
+ max_block_size = s->pending_buf_size - 5;
+ }
+
+ /* Copy as much as possible from input to output: */
+ for (;;) {
+ /* Fill the window as much as possible: */
+ if (s->lookahead <= 1) {
+
+ Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+ s->block_start >= (long)s->w_size, "slide too late");
+
+ fill_window(s);
+ if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+ Assert(s->block_start >= 0L, "block gone");
+
+ s->strstart += s->lookahead;
+ s->lookahead = 0;
+
+ /* Emit a stored block if pending_buf will be full: */
+ max_start = s->block_start + max_block_size;
+ if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+ /* strstart == 0 is possible when wraparound on 16-bit machine */
+ s->lookahead = (uInt)(s->strstart - max_start);
+ s->strstart = (uInt)max_start;
+ FLUSH_BLOCK(s, 0);
+ }
+ /* Flush if we may have to slide, otherwise block_start may become
+ * negative and the data will be gone:
+ */
+ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+ FLUSH_BLOCK(s, 0);
+ }
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if ((long)s->strstart > s->block_start)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head; /* head of the hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ hash_head = NIL;
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
+ }
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->match_start, s->match_length);
+
+ _tr_tally_dist(s, s->strstart - s->match_start,
+ s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+#ifndef FASTEST
+ if (s->match_length <= s->max_insert_length &&
+ s->lookahead >= MIN_MATCH) {
+ s->match_length--; /* string at strstart already in table */
+ do {
+ s->strstart++;
+ INSERT_STRING(s, s->strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--s->match_length != 0);
+ s->strstart++;
+ } else
+#endif
+ {
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+ * matter since it will be recomputed at next deflate call.
+ */
+ }
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head; /* head of hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ /* Process the input block. */
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ hash_head = NIL;
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ */
+ s->prev_length = s->match_length, s->prev_match = s->match_start;
+ s->match_length = MIN_MATCH-1;
+
+ if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+ s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
+
+ if (s->match_length <= 5 && (s->strategy == Z_FILTERED
+#if TOO_FAR <= 32767
+ || (s->match_length == MIN_MATCH &&
+ s->strstart - s->match_start > TOO_FAR)
+#endif
+ )) {
+
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ s->match_length = MIN_MATCH-1;
+ }
+ }
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+ uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+ /* Do not insert strings in hash table beyond this. */
+
+ check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+ _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+ s->prev_length - MIN_MATCH, bflush);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted. If there is not
+ * enough lookahead, the last two strings are not inserted in
+ * the hash table.
+ */
+ s->lookahead -= s->prev_length-1;
+ s->prev_length -= 2;
+ do {
+ if (++s->strstart <= max_insert) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+ } while (--s->prev_length != 0);
+ s->match_available = 0;
+ s->match_length = MIN_MATCH-1;
+ s->strstart++;
+
+ if (bflush) FLUSH_BLOCK(s, 0);
+
+ } else if (s->match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ if (bflush) {
+ FLUSH_BLOCK_ONLY(s, 0);
+ }
+ s->strstart++;
+ s->lookahead--;
+ if (s->strm->avail_out == 0) return need_more;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ s->match_available = 1;
+ s->strstart++;
+ s->lookahead--;
+ }
+ }
+ Assert (flush != Z_NO_FLUSH, "no flush?");
+ if (s->match_available) {
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ s->match_available = 0;
+ }
+ s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+#endif /* FASTEST */
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan, *strend; /* scan goes up to strend for length of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest run, plus one for the unrolled loop.
+ */
+ if (s->lookahead <= MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ s->match_length = 0;
+ if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
+ scan = s->window + s->strstart - 1;
+ prev = *scan;
+ if (prev == *++scan && prev == *++scan && prev == *++scan) {
+ strend = s->window + s->strstart + MAX_MATCH;
+ do {
+ } while (prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ scan < strend);
+ s->match_length = MAX_MATCH - (int)(strend - scan);
+ if (s->match_length > s->lookahead)
+ s->match_length = s->lookahead;
+ }
+ Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+ _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we have a literal to write. */
+ if (s->lookahead == 0) {
+ fill_window(s);
+ if (s->lookahead == 0) {
+ if (flush == Z_NO_FLUSH)
+ return need_more;
+ break; /* flush the current block */
+ }
+ }
+
+ /* Output a literal byte */
+ s->match_length = 0;
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
--- /dev/null
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer creation by deflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip encoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS 256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES 30
+/* number of distance codes */
+
+#define BL_CODES 19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define Buf_size 16
+/* size of bit buffer in bi_buf */
+
+#define INIT_STATE 42
+#define EXTRA_STATE 69
+#define NAME_STATE 73
+#define COMMENT_STATE 91
+#define HCRC_STATE 103
+#define BUSY_STATE 113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+ union {
+ ush freq; /* frequency count */
+ ush code; /* bit string */
+ } fc;
+ union {
+ ush dad; /* father node in Huffman tree */
+ ush len; /* length of bit string */
+ } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad dl.dad
+#define Len dl.len
+
+typedef struct static_tree_desc_s static_tree_desc;
+
+typedef struct tree_desc_s {
+ ct_data *dyn_tree; /* the dynamic tree */
+ int max_code; /* largest code with non zero frequency */
+ static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ int status; /* as the name implies */
+ Bytef *pending_buf; /* output still pending */
+ ulg pending_buf_size; /* size of pending_buf */
+ Bytef *pending_out; /* next pending byte to output to the stream */
+ uInt pending; /* nb of bytes in the pending buffer */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ gz_headerp gzhead; /* gzip header information to write */
+ uInt gzindex; /* where in extra, name, or comment */
+ Byte method; /* can only be DEFLATED */
+ int last_flush; /* value of flush param for previous deflate call */
+
+ /* used by deflate.c: */
+
+ uInt w_size; /* LZ77 window size (32K by default) */
+ uInt w_bits; /* log2(w_size) (8..16) */
+ uInt w_mask; /* w_size - 1 */
+
+ Bytef *window;
+ /* Sliding window. Input bytes are read into the second half of the window,
+ * and move to the first half later to keep a dictionary of at least wSize
+ * bytes. With this organization, matches are limited to a distance of
+ * wSize-MAX_MATCH bytes, but this ensures that IO is always
+ * performed with a length multiple of the block size. Also, it limits
+ * the window size to 64K, which is quite useful on MSDOS.
+ * To do: use the user input buffer as sliding window.
+ */
+
+ ulg window_size;
+ /* Actual size of window: 2*wSize, except when the user input buffer
+ * is directly used as sliding window.
+ */
+
+ Posf *prev;
+ /* Link to older string with same hash index. To limit the size of this
+ * array to 64K, this link is maintained only for the last 32K strings.
+ * An index in this array is thus a window index modulo 32K.
+ */
+
+ Posf *head; /* Heads of the hash chains or NIL. */
+
+ uInt ins_h; /* hash index of string to be inserted */
+ uInt hash_size; /* number of elements in hash table */
+ uInt hash_bits; /* log2(hash_size) */
+ uInt hash_mask; /* hash_size-1 */
+
+ uInt hash_shift;
+ /* Number of bits by which ins_h must be shifted at each input
+ * step. It must be such that after MIN_MATCH steps, the oldest
+ * byte no longer takes part in the hash key, that is:
+ * hash_shift * MIN_MATCH >= hash_bits
+ */
+
+ long block_start;
+ /* Window position at the beginning of the current output block. Gets
+ * negative when the window is moved backwards.
+ */
+
+ uInt match_length; /* length of best match */
+ IPos prev_match; /* previous match */
+ int match_available; /* set if previous match exists */
+ uInt strstart; /* start of string to insert */
+ uInt match_start; /* start of matching string */
+ uInt lookahead; /* number of valid bytes ahead in window */
+
+ uInt prev_length;
+ /* Length of the best match at previous step. Matches not greater than this
+ * are discarded. This is used in the lazy match evaluation.
+ */
+
+ uInt max_chain_length;
+ /* To speed up deflation, hash chains are never searched beyond this
+ * length. A higher limit improves compression ratio but degrades the
+ * speed.
+ */
+
+ uInt max_lazy_match;
+ /* Attempt to find a better match only when the current match is strictly
+ * smaller than this value. This mechanism is used only for compression
+ * levels >= 4.
+ */
+# define max_insert_length max_lazy_match
+ /* Insert new strings in the hash table only if the match length is not
+ * greater than this length. This saves time but degrades compression.
+ * max_insert_length is used only for compression levels <= 3.
+ */
+
+ int level; /* compression level (1..9) */
+ int strategy; /* favor or force Huffman coding*/
+
+ uInt good_match;
+ /* Use a faster search when the previous match is longer than this */
+
+ int nice_match; /* Stop searching when current match exceeds this */
+
+ /* used by trees.c: */
+ /* Didn't use ct_data typedef below to suppress compiler warning */
+ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
+ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
+
+ struct tree_desc_s l_desc; /* desc. for literal tree */
+ struct tree_desc_s d_desc; /* desc. for distance tree */
+ struct tree_desc_s bl_desc; /* desc. for bit length tree */
+
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
+ int heap_len; /* number of elements in the heap */
+ int heap_max; /* element of largest frequency */
+ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ * The same heap array is used to build all trees.
+ */
+
+ uch depth[2*L_CODES+1];
+ /* Depth of each subtree used as tie breaker for trees of equal frequency
+ */
+
+ uchf *l_buf; /* buffer for literals or lengths */
+
+ uInt lit_bufsize;
+ /* Size of match buffer for literals/lengths. There are 4 reasons for
+ * limiting lit_bufsize to 64K:
+ * - frequencies can be kept in 16 bit counters
+ * - if compression is not successful for the first block, all input
+ * data is still in the window so we can still emit a stored block even
+ * when input comes from standard input. (This can also be done for
+ * all blocks if lit_bufsize is not greater than 32K.)
+ * - if compression is not successful for a file smaller than 64K, we can
+ * even emit a stored file instead of a stored block (saving 5 bytes).
+ * This is applicable only for zip (not gzip or zlib).
+ * - creating new Huffman trees less frequently may not provide fast
+ * adaptation to changes in the input data statistics. (Take for
+ * example a binary file with poorly compressible code followed by
+ * a highly compressible string table.) Smaller buffer sizes give
+ * fast adaptation but have of course the overhead of transmitting
+ * trees more frequently.
+ * - I can't count above 4
+ */
+
+ uInt last_lit; /* running index in l_buf */
+
+ ushf *d_buf;
+ /* Buffer for distances. To simplify the code, d_buf and l_buf have
+ * the same number of elements. To use different lengths, an extra flag
+ * array would be necessary.
+ */
+
+ ulg opt_len; /* bit length of current block with optimal trees */
+ ulg static_len; /* bit length of current block with static trees */
+ uInt matches; /* number of string matches in current block */
+ uInt insert; /* bytes at end of window left to insert */
+
+#ifdef DEBUG
+ ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+ ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
+#endif
+
+ ush bi_buf;
+ /* Output buffer. bits are inserted starting at the bottom (least
+ * significant bits).
+ */
+ int bi_valid;
+ /* Number of valid bits in bi_buf. All bits above the last valid bit
+ * are always zero.
+ */
+
+ ulg high_water;
+ /* High water mark offset in window for initialized bytes -- bytes above
+ * this are set to zero in order to avoid memory check warnings when
+ * longest match routines access bytes past the input. This is then
+ * updated to the new high water mark.
+ */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+#define WIN_INIT MAX_MATCH
+/* Number of bytes after end of data in window to initialize in order to avoid
+ memory checker errors from longest match routines */
+
+ /* in trees.c */
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
+
+#define d_code(dist) \
+ ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+ extern uch ZLIB_INTERNAL _length_code[];
+ extern uch ZLIB_INTERNAL _dist_code[];
+#else
+ extern const uch ZLIB_INTERNAL _length_code[];
+ extern const uch ZLIB_INTERNAL _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+ { uch cc = (c); \
+ s->d_buf[s->last_lit] = 0; \
+ s->l_buf[s->last_lit++] = cc; \
+ s->dyn_ltree[cc].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+# define _tr_tally_dist(s, distance, length, flush) \
+ { uch len = (length); \
+ ush dist = (distance); \
+ s->d_buf[s->last_lit] = dist; \
+ s->l_buf[s->last_lit++] = len; \
+ dist--; \
+ s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+ s->dyn_dtree[d_code(dist)].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+ flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */
--- /dev/null
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast. The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits. Also the distance trees have 30 possible
+values, and the size of the first table is six bits. Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend too much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jloup@gzip.org madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://tools.ietf.org/html/rfc1951
--- /dev/null
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1950 Aladdin Enterprises
+Category: Informational J-L. Gailly
+ Info-ZIP
+ May 1996
+
+
+ ZLIB Compressed Data Format Specification version 3.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format. The
+ data can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a priori
+ bounded amount of intermediate storage. The format presently uses
+ the DEFLATE compression method but can be easily extended to use
+ other compression methods. It can be implemented readily in a manner
+ not covered by patents. This specification also defines the ADLER-32
+ checksum (an extension and improvement of the Fletcher checksum),
+ used for detection of data corruption, and provides an algorithm for
+ computing it.
+
+
+
+
+Deutsch & Gailly Informational [Page 1]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................ 3
+ 1.6. Changes from previous versions ............................ 3
+ 2. Detailed specification ......................................... 3
+ 2.1. Overall conventions ....................................... 3
+ 2.2. Data format ............................................... 4
+ 2.3. Compliance ................................................ 7
+ 3. References ..................................................... 7
+ 4. Source code .................................................... 8
+ 5. Security Considerations ........................................ 8
+ 6. Acknowledgements ............................................... 8
+ 7. Authors' Addresses ............................................. 8
+ 8. Appendix: Rationale ............................................ 9
+ 9. Appendix: Sample code ..........................................10
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+
+ * Can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a
+ priori bounded amount of intermediate storage, and hence can
+ be used in data communications or similar structures such as
+ Unix filters;
+
+ * Can use a number of different compression methods;
+
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely.
+
+ The data format defined by this specification does not attempt to
+ allow random access to compressed data.
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 2]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into zlib format and/or decompress data from zlib
+ format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations.
+
+ 1.3. Scope
+
+ The specification specifies a compressed data format that can be
+ used for in-memory compression of a sequence of arbitrary bytes.
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any data set that conforms to all
+ the specifications presented here; a compliant compressor must
+ produce data sets that conform to all the specifications presented
+ here.
+
+ 1.5. Definitions of terms and conventions used
+
+ byte: 8 bits stored or transmitted as a unit (same as an octet).
+ (For this specification, a byte is exactly 8 bits, even on
+ machines which store a character on a number of bits different
+ from 8.) See below, for the numbering of bits within a byte.
+
+ 1.6. Changes from previous versions
+
+ Version 3.1 was the first public release of this specification.
+ In version 3.2, some terminology was changed and the Adler-32
+ sample code was rewritten for clarity. In version 3.3, the
+ support for a preset dictionary was introduced, and the
+ specification was converted to RFC style.
+
+2. Detailed specification
+
+ 2.1. Overall conventions
+
+ In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+
+
+
+Deutsch & Gailly Informational [Page 3]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the MOST-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00000010|00001000|
+ +--------+--------+
+ ^ ^
+ | |
+ | + less significant byte = 8
+ + more significant byte = 2 x 256
+
+ 2.2. Data format
+
+ A zlib stream has the following structure:
+
+ 0 1
+ +---+---+
+ |CMF|FLG| (more-->)
+ +---+---+
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 4]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ (if FLG.FDICT set)
+
+ 0 1 2 3
+ +---+---+---+---+
+ | DICTID | (more-->)
+ +---+---+---+---+
+
+ +=====================+---+---+---+---+
+ |...compressed data...| ADLER32 |
+ +=====================+---+---+---+---+
+
+ Any data which may appear after ADLER32 are not part of the zlib
+ stream.
+
+ CMF (Compression Method and flags)
+ This byte is divided into a 4-bit compression method and a 4-
+ bit information field depending on the compression method.
+
+ bits 0 to 3 CM Compression method
+ bits 4 to 7 CINFO Compression info
+
+ CM (Compression method)
+ This identifies the compression method used in the file. CM = 8
+ denotes the "deflate" compression method with a window size up
+ to 32K. This is the method used by gzip and PNG (see
+ references [1] and [2] in Chapter 3, below, for the reference
+ documents). CM = 15 is reserved. It might be used in a future
+ version of this specification to indicate the presence of an
+ extra field before the compressed data.
+
+ CINFO (Compression info)
+ For CM = 8, CINFO is the base-2 logarithm of the LZ77 window
+ size, minus eight (CINFO=7 indicates a 32K window size). Values
+ of CINFO above 7 are not allowed in this version of the
+ specification. CINFO is not defined in this specification for
+ CM not equal to 8.
+
+ FLG (FLaGs)
+ This flag byte is divided as follows:
+
+ bits 0 to 4 FCHECK (check bits for CMF and FLG)
+ bit 5 FDICT (preset dictionary)
+ bits 6 to 7 FLEVEL (compression level)
+
+ The FCHECK value must be such that CMF and FLG, when viewed as
+ a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG),
+ is a multiple of 31.
+
+
+
+
+Deutsch & Gailly Informational [Page 5]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ FDICT (Preset dictionary)
+ If FDICT is set, a DICT dictionary identifier is present
+ immediately after the FLG byte. The dictionary is a sequence of
+ bytes which are initially fed to the compressor without
+ producing any compressed output. DICT is the Adler-32 checksum
+ of this sequence of bytes (see the definition of ADLER32
+ below). The decompressor can use this identifier to determine
+ which dictionary has been used by the compressor.
+
+ FLEVEL (Compression level)
+ These flags are available for use by specific compression
+ methods. The "deflate" method (CM = 8) sets these flags as
+ follows:
+
+ 0 - compressor used fastest algorithm
+ 1 - compressor used fast algorithm
+ 2 - compressor used default algorithm
+ 3 - compressor used maximum compression, slowest algorithm
+
+ The information in FLEVEL is not needed for decompression; it
+ is there to indicate if recompression might be worthwhile.
+
+ compressed data
+ For compression method 8, the compressed data is stored in the
+ deflate compressed data format as described in the document
+ "DEFLATE Compressed Data Format Specification" by L. Peter
+ Deutsch. (See reference [3] in Chapter 3, below)
+
+ Other compressed data formats are not specified in this version
+ of the zlib specification.
+
+ ADLER32 (Adler-32 checksum)
+ This contains a checksum value of the uncompressed data
+ (excluding any dictionary data) computed according to Adler-32
+ algorithm. This algorithm is a 32-bit extension and improvement
+ of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073
+ standard. See references [4] and [5] in Chapter 3, below)
+
+ Adler-32 is composed of two sums accumulated per byte: s1 is
+ the sum of all bytes, s2 is the sum of all s1 values. Both sums
+ are done modulo 65521. s1 is initialized to 1, s2 to zero. The
+ Adler-32 checksum is stored as s2*65536 + s1 in most-
+ significant-byte first (network) order.
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 6]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ 2.3. Compliance
+
+ A compliant compressor must produce streams with correct CMF, FLG
+ and ADLER32, but need not support preset dictionaries. When the
+ zlib data format is used as part of another standard data format,
+ the compressor may use only preset dictionaries that are specified
+ by this other data format. If this other format does not use the
+ preset dictionary feature, the compressor must not set the FDICT
+ flag.
+
+ A compliant decompressor must check CMF, FLG, and ADLER32, and
+ provide an error indication if any of these have incorrect values.
+ A compliant decompressor must give an error indication if CM is
+ not one of the values defined in this specification (only the
+ value 8 is permitted in this version), since another value could
+ indicate the presence of new features that would cause subsequent
+ data to be interpreted incorrectly. A compliant decompressor must
+ give an error indication if FDICT is set and DICTID is not the
+ identifier of a known preset dictionary. A decompressor may
+ ignore FLEVEL and still be compliant. When the zlib data format
+ is being used as a part of another standard format, a compliant
+ decompressor must support all the preset dictionaries specified by
+ the other format. When the other format does not use the preset
+ dictionary feature, a compliant decompressor must reject any
+ stream in which the FDICT flag is set.
+
+3. References
+
+ [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [2] Thomas Boutell, "PNG (Portable Network Graphics) specification",
+ available in ftp://ftp.uu.net/graphics/png/documents/
+
+ [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [4] Fletcher, J. G., "An Arithmetic Checksum for Serial
+ Transmissions," IEEE Transactions on Communications, Vol. COM-30,
+ No. 1, January 1982, pp. 247-252.
+
+ [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms,"
+ November, 1993, pp. 144, 145. (Available from
+ gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073.
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 7]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+4. Source code
+
+ Source code for a C language implementation of a "zlib" compliant
+ library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/.
+
+5. Security Considerations
+
+ A decoder that fails to check the ADLER32 checksum value may be
+ subject to undetected data corruption.
+
+6. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Jean-Loup Gailly and Mark Adler designed the zlib format and wrote
+ the related software described in this specification. Glenn
+ Randers-Pehrson converted this document to RFC and HTML format.
+
+7. Authors' Addresses
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+
+ Jean-Loup Gailly
+
+ EMail: <gzip@prep.ai.mit.edu>
+
+ Questions about the technical content of this specification can be
+ sent by email to
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 8]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+8. Appendix: Rationale
+
+ 8.1. Preset dictionaries
+
+ A preset dictionary is specially useful to compress short input
+ sequences. The compressor can take advantage of the dictionary
+ context to encode the input in a more compact manner. The
+ decompressor can be initialized with the appropriate context by
+ virtually decompressing a compressed version of the dictionary
+ without producing any output. However for certain compression
+ algorithms such as the deflate algorithm this operation can be
+ achieved without actually performing any decompression.
+
+ The compressor and the decompressor must use exactly the same
+ dictionary. The dictionary may be fixed or may be chosen among a
+ certain number of predefined dictionaries, according to the kind
+ of input data. The decompressor can determine which dictionary has
+ been chosen by the compressor by checking the dictionary
+ identifier. This document does not specify the contents of
+ predefined dictionaries, since the optimal dictionaries are
+ application specific. Standard data formats using this feature of
+ the zlib specification must precisely define the allowed
+ dictionaries.
+
+ 8.2. The Adler-32 algorithm
+
+ The Adler-32 algorithm is much faster than the CRC32 algorithm yet
+ still provides an extremely low probability of undetected errors.
+
+ The modulo on unsigned long accumulators can be delayed for 5552
+ bytes, so the modulo operation time is negligible. If the bytes
+ are a, b, c, the second sum is 3a + 2b + c + 3, and so is position
+ and order sensitive, unlike the first sum, which is just a
+ checksum. That 65521 is prime is important to avoid a possible
+ large class of two-byte errors that leave the check unchanged.
+ (The Fletcher checksum uses 255, which is not prime and which also
+ makes the Fletcher check insensitive to single byte changes 0 <->
+ 255.)
+
+ The sum s1 is initialized to 1 instead of zero to make the length
+ of the sequence part of s2, so that the length does not have to be
+ checked separately. (Any sequence of zeroes has a Fletcher
+ checksum of zero.)
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 9]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+9. Appendix: Sample code
+
+ The following C code computes the Adler-32 checksum of a data buffer.
+ It is written for clarity, not for speed. The sample code is in the
+ ANSI C programming language. Non C users may find it easier to read
+ with these hints:
+
+ & Bitwise AND operator.
+ >> Bitwise right shift operator. When applied to an
+ unsigned quantity, as here, right shift inserts zero bit(s)
+ at the left.
+ << Bitwise left shift operator. Left shift inserts zero
+ bit(s) at the right.
+ ++ "n++" increments the variable n.
+ % modulo operator: a % b is the remainder of a divided by b.
+
+ #define BASE 65521 /* largest prime smaller than 65536 */
+
+ /*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1]
+ and return the updated checksum. The Adler-32 checksum should be
+ initialized to 1.
+
+ Usage example:
+
+ unsigned long adler = 1L;
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = update_adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+ */
+ unsigned long update_adler32(unsigned long adler,
+ unsigned char *buf, int len)
+ {
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int n;
+
+ for (n = 0; n < len; n++) {
+ s1 = (s1 + buf[n]) % BASE;
+ s2 = (s2 + s1) % BASE;
+ }
+ return (s2 << 16) + s1;
+ }
+
+ /* Return the adler32 of the bytes buf[0..len-1] */
+
+
+
+
+Deutsch & Gailly Informational [Page 10]
+\f
+RFC 1950 ZLIB Compressed Data Format Specification May 1996
+
+
+ unsigned long adler32(unsigned char *buf, int len)
+ {
+ return update_adler32(1L, buf, len);
+ }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch & Gailly Informational [Page 11]
+\f
--- /dev/null
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1951 Aladdin Enterprises
+Category: Informational May 1996
+
+
+ DEFLATE Compressed Data Format Specification version 1.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format that
+ compresses data using a combination of the LZ77 algorithm and Huffman
+ coding, with efficiency comparable to the best currently available
+ general-purpose compression methods. The data can be produced or
+ consumed, even for an arbitrarily long sequentially presented input
+ data stream, using only an a priori bounded amount of intermediate
+ storage. The format can be implemented readily in a manner not
+ covered by patents.
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 1]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................ 3
+ 1.6. Changes from previous versions ............................ 4
+ 2. Compressed representation overview ............................. 4
+ 3. Detailed specification ......................................... 5
+ 3.1. Overall conventions ....................................... 5
+ 3.1.1. Packing into bytes .................................. 5
+ 3.2. Compressed block format ................................... 6
+ 3.2.1. Synopsis of prefix and Huffman coding ............... 6
+ 3.2.2. Use of Huffman coding in the "deflate" format ....... 7
+ 3.2.3. Details of block format ............................. 9
+ 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11
+ 3.2.5. Compressed blocks (length and distance codes) ...... 11
+ 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12
+ 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13
+ 3.3. Compliance ............................................... 14
+ 4. Compression algorithm details ................................. 14
+ 5. References .................................................... 16
+ 6. Security Considerations ....................................... 16
+ 7. Source code ................................................... 16
+ 8. Acknowledgements .............................................. 16
+ 9. Author's Address .............................................. 17
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+ * Can be produced or consumed, even for an arbitrarily long
+ sequentially presented input data stream, using only an a
+ priori bounded amount of intermediate storage, and hence
+ can be used in data communications or similar structures
+ such as Unix filters;
+ * Compresses data with efficiency comparable to the best
+ currently available general-purpose compression methods,
+ and in particular considerably better than the "compress"
+ program;
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely;
+
+
+
+Deutsch Informational [Page 2]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ * Is compatible with the file format produced by the current
+ widely used gzip utility, in that conforming decompressors
+ will be able to read data produced by the existing gzip
+ compressor.
+
+ The data format defined by this specification does not attempt to:
+
+ * Allow random access to compressed data;
+ * Compress specialized data (e.g., raster graphics) as well
+ as the best currently available specialized algorithms.
+
+ A simple counting argument shows that no lossless compression
+ algorithm can compress every possible input data set. For the
+ format defined here, the worst case expansion is 5 bytes per 32K-
+ byte block, i.e., a size increase of 0.015% for large data sets.
+ English text usually compresses by a factor of 2.5 to 3;
+ executable files usually compress somewhat less; graphical data
+ such as raster images may compress much more.
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into "deflate" format and/or decompress data from
+ "deflate" format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations. Familiarity with the technique of Huffman coding
+ is helpful but not required.
+
+ 1.3. Scope
+
+ The specification specifies a method for representing a sequence
+ of bytes as a (usually shorter) sequence of bits, and a method for
+ packing the latter bit sequence into bytes.
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any data set that conforms to all
+ the specifications presented here; a compliant compressor must
+ produce data sets that conform to all the specifications presented
+ here.
+
+ 1.5. Definitions of terms and conventions used
+
+ Byte: 8 bits stored or transmitted as a unit (same as an octet).
+ For this specification, a byte is exactly 8 bits, even on machines
+
+
+
+Deutsch Informational [Page 3]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ which store a character on a number of bits different from eight.
+ See below, for the numbering of bits within a byte.
+
+ String: a sequence of arbitrary bytes.
+
+ 1.6. Changes from previous versions
+
+ There have been no technical changes to the deflate format since
+ version 1.1 of this specification. In version 1.2, some
+ terminology was changed. Version 1.3 is a conversion of the
+ specification to RFC style.
+
+2. Compressed representation overview
+
+ A compressed data set consists of a series of blocks, corresponding
+ to successive blocks of input data. The block sizes are arbitrary,
+ except that non-compressible blocks are limited to 65,535 bytes.
+
+ Each block is compressed using a combination of the LZ77 algorithm
+ and Huffman coding. The Huffman trees for each block are independent
+ of those for previous or subsequent blocks; the LZ77 algorithm may
+ use a reference to a duplicated string occurring in a previous block,
+ up to 32K input bytes before.
+
+ Each block consists of two parts: a pair of Huffman code trees that
+ describe the representation of the compressed data part, and a
+ compressed data part. (The Huffman trees themselves are compressed
+ using Huffman encoding.) The compressed data consists of a series of
+ elements of two types: literal bytes (of strings that have not been
+ detected as duplicated within the previous 32K input bytes), and
+ pointers to duplicated strings, where a pointer is represented as a
+ pair <length, backward distance>. The representation used in the
+ "deflate" format limits distances to 32K bytes and lengths to 258
+ bytes, but does not limit the size of a block, except for
+ uncompressible blocks, which are limited as noted above.
+
+ Each type of value (literals, distances, and lengths) in the
+ compressed data is represented using a Huffman code, using one code
+ tree for literals and lengths and a separate code tree for distances.
+ The code trees for each block appear in a compact form just before
+ the compressed data for that block.
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 4]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+3. Detailed specification
+
+ 3.1. Overall conventions In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the least-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00001000|00000010|
+ +--------+--------+
+ ^ ^
+ | |
+ | + more significant byte = 2 x 256
+ + less significant byte = 8
+
+ 3.1.1. Packing into bytes
+
+ This document does not address the issue of the order in which
+ bits of a byte are transmitted on a bit-sequential medium,
+ since the final data format described here is byte- rather than
+
+
+
+Deutsch Informational [Page 5]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ bit-oriented. However, we describe the compressed block format
+ in below, as a sequence of data elements of various bit
+ lengths, not a sequence of bytes. We must therefore specify
+ how to pack these data elements into bytes to form the final
+ compressed byte sequence:
+
+ * Data elements are packed into bytes in order of
+ increasing bit number within the byte, i.e., starting
+ with the least-significant bit of the byte.
+ * Data elements other than Huffman codes are packed
+ starting with the least-significant bit of the data
+ element.
+ * Huffman codes are packed starting with the most-
+ significant bit of the code.
+
+ In other words, if one were to print out the compressed data as
+ a sequence of bytes, starting with the first byte at the
+ *right* margin and proceeding to the *left*, with the most-
+ significant bit of each byte on the left as usual, one would be
+ able to parse the result from right to left, with fixed-width
+ elements in the correct MSB-to-LSB order and Huffman codes in
+ bit-reversed order (i.e., with the first bit of the code in the
+ relative LSB position).
+
+ 3.2. Compressed block format
+
+ 3.2.1. Synopsis of prefix and Huffman coding
+
+ Prefix coding represents symbols from an a priori known
+ alphabet by bit sequences (codes), one code for each symbol, in
+ a manner such that different symbols may be represented by bit
+ sequences of different lengths, but a parser can always parse
+ an encoded string unambiguously symbol-by-symbol.
+
+ We define a prefix code in terms of a binary tree in which the
+ two edges descending from each non-leaf node are labeled 0 and
+ 1 and in which the leaf nodes correspond one-for-one with (are
+ labeled with) the symbols of the alphabet; then the code for a
+ symbol is the sequence of 0's and 1's on the edges leading from
+ the root to the leaf labeled with that symbol. For example:
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 6]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ /\ Symbol Code
+ 0 1 ------ ----
+ / \ A 00
+ /\ B B 1
+ 0 1 C 011
+ / \ D 010
+ A /\
+ 0 1
+ / \
+ D C
+
+ A parser can decode the next symbol from an encoded input
+ stream by walking down the tree from the root, at each step
+ choosing the edge corresponding to the next input bit.
+
+ Given an alphabet with known symbol frequencies, the Huffman
+ algorithm allows the construction of an optimal prefix code
+ (one which represents strings with those symbol frequencies
+ using the fewest bits of any possible prefix codes for that
+ alphabet). Such a code is called a Huffman code. (See
+ reference [1] in Chapter 5, references for additional
+ information on Huffman codes.)
+
+ Note that in the "deflate" format, the Huffman codes for the
+ various alphabets must not exceed certain maximum code lengths.
+ This constraint complicates the algorithm for computing code
+ lengths from symbol frequencies. Again, see Chapter 5,
+ references for details.
+
+ 3.2.2. Use of Huffman coding in the "deflate" format
+
+ The Huffman codes used for each alphabet in the "deflate"
+ format have two additional rules:
+
+ * All codes of a given bit length have lexicographically
+ consecutive values, in the same order as the symbols
+ they represent;
+
+ * Shorter codes lexicographically precede longer codes.
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 7]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ We could recode the example above to follow this rule as
+ follows, assuming that the order of the alphabet is ABCD:
+
+ Symbol Code
+ ------ ----
+ A 10
+ B 0
+ C 110
+ D 111
+
+ I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are
+ lexicographically consecutive.
+
+ Given this rule, we can define the Huffman code for an alphabet
+ just by giving the bit lengths of the codes for each symbol of
+ the alphabet in order; this is sufficient to determine the
+ actual codes. In our example, the code is completely defined
+ by the sequence of bit lengths (2, 1, 3, 3). The following
+ algorithm generates the codes as integers, intended to be read
+ from most- to least-significant bit. The code lengths are
+ initially in tree[I].Len; the codes are produced in
+ tree[I].Code.
+
+ 1) Count the number of codes for each code length. Let
+ bl_count[N] be the number of codes of length N, N >= 1.
+
+ 2) Find the numerical value of the smallest code for each
+ code length:
+
+ code = 0;
+ bl_count[0] = 0;
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ code = (code + bl_count[bits-1]) << 1;
+ next_code[bits] = code;
+ }
+
+ 3) Assign numerical values to all codes, using consecutive
+ values for all codes of the same length with the base
+ values determined at step 2. Codes that are never used
+ (which have a bit length of zero) must not be assigned a
+ value.
+
+ for (n = 0; n <= max_code; n++) {
+ len = tree[n].Len;
+ if (len != 0) {
+ tree[n].Code = next_code[len];
+ next_code[len]++;
+ }
+
+
+
+Deutsch Informational [Page 8]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ }
+
+ Example:
+
+ Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3,
+ 3, 2, 4, 4). After step 1, we have:
+
+ N bl_count[N]
+ - -----------
+ 2 1
+ 3 5
+ 4 2
+
+ Step 2 computes the following next_code values:
+
+ N next_code[N]
+ - ------------
+ 1 0
+ 2 0
+ 3 2
+ 4 14
+
+ Step 3 produces the following code values:
+
+ Symbol Length Code
+ ------ ------ ----
+ A 3 010
+ B 3 011
+ C 3 100
+ D 3 101
+ E 3 110
+ F 2 00
+ G 4 1110
+ H 4 1111
+
+ 3.2.3. Details of block format
+
+ Each block of compressed data begins with 3 header bits
+ containing the following data:
+
+ first bit BFINAL
+ next 2 bits BTYPE
+
+ Note that the header bits do not necessarily begin on a byte
+ boundary, since a block does not necessarily occupy an integral
+ number of bytes.
+
+
+
+
+
+Deutsch Informational [Page 9]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ BFINAL is set if and only if this is the last block of the data
+ set.
+
+ BTYPE specifies how the data are compressed, as follows:
+
+ 00 - no compression
+ 01 - compressed with fixed Huffman codes
+ 10 - compressed with dynamic Huffman codes
+ 11 - reserved (error)
+
+ The only difference between the two compressed cases is how the
+ Huffman codes for the literal/length and distance alphabets are
+ defined.
+
+ In all cases, the decoding algorithm for the actual data is as
+ follows:
+
+ do
+ read block header from input stream.
+ if stored with no compression
+ skip any remaining bits in current partially
+ processed byte
+ read LEN and NLEN (see next section)
+ copy LEN bytes of data to output
+ otherwise
+ if compressed with dynamic Huffman codes
+ read representation of code trees (see
+ subsection below)
+ loop (until end of block code recognized)
+ decode literal/length value from input stream
+ if value < 256
+ copy value (literal byte) to output stream
+ otherwise
+ if value = end of block (256)
+ break from loop
+ otherwise (value = 257..285)
+ decode distance from input stream
+
+ move backwards distance bytes in the output
+ stream, and copy length bytes from this
+ position to the output stream.
+ end loop
+ while not last block
+
+ Note that a duplicated string reference may refer to a string
+ in a previous block; i.e., the backward distance may cross one
+ or more block boundaries. However a distance cannot refer past
+ the beginning of the output stream. (An application using a
+
+
+
+Deutsch Informational [Page 10]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ preset dictionary might discard part of the output stream; a
+ distance can refer to that part of the output stream anyway)
+ Note also that the referenced string may overlap the current
+ position; for example, if the last 2 bytes decoded have values
+ X and Y, a string reference with <length = 5, distance = 2>
+ adds X,Y,X,Y,X to the output stream.
+
+ We now specify each compression method in turn.
+
+ 3.2.4. Non-compressed blocks (BTYPE=00)
+
+ Any bits of input up to the next byte boundary are ignored.
+ The rest of the block consists of the following information:
+
+ 0 1 2 3 4...
+ +---+---+---+---+================================+
+ | LEN | NLEN |... LEN bytes of literal data...|
+ +---+---+---+---+================================+
+
+ LEN is the number of data bytes in the block. NLEN is the
+ one's complement of LEN.
+
+ 3.2.5. Compressed blocks (length and distance codes)
+
+ As noted above, encoded data blocks in the "deflate" format
+ consist of sequences of symbols drawn from three conceptually
+ distinct alphabets: either literal bytes, from the alphabet of
+ byte values (0..255), or <length, backward distance> pairs,
+ where the length is drawn from (3..258) and the distance is
+ drawn from (1..32,768). In fact, the literal and length
+ alphabets are merged into a single alphabet (0..285), where
+ values 0..255 represent literal bytes, the value 256 indicates
+ end-of-block, and values 257..285 represent length codes
+ (possibly in conjunction with extra bits following the symbol
+ code) as follows:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 11]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ Extra Extra Extra
+ Code Bits Length(s) Code Bits Lengths Code Bits Length(s)
+ ---- ---- ------ ---- ---- ------- ---- ---- -------
+ 257 0 3 267 1 15,16 277 4 67-82
+ 258 0 4 268 1 17,18 278 4 83-98
+ 259 0 5 269 2 19-22 279 4 99-114
+ 260 0 6 270 2 23-26 280 4 115-130
+ 261 0 7 271 2 27-30 281 5 131-162
+ 262 0 8 272 2 31-34 282 5 163-194
+ 263 0 9 273 3 35-42 283 5 195-226
+ 264 0 10 274 3 43-50 284 5 227-257
+ 265 1 11,12 275 3 51-58 285 0 258
+ 266 1 13,14 276 3 59-66
+
+ The extra bits should be interpreted as a machine integer
+ stored with the most-significant bit first, e.g., bits 1110
+ represent the value 14.
+
+ Extra Extra Extra
+ Code Bits Dist Code Bits Dist Code Bits Distance
+ ---- ---- ---- ---- ---- ------ ---- ---- --------
+ 0 0 1 10 4 33-48 20 9 1025-1536
+ 1 0 2 11 4 49-64 21 9 1537-2048
+ 2 0 3 12 5 65-96 22 10 2049-3072
+ 3 0 4 13 5 97-128 23 10 3073-4096
+ 4 1 5,6 14 6 129-192 24 11 4097-6144
+ 5 1 7,8 15 6 193-256 25 11 6145-8192
+ 6 2 9-12 16 7 257-384 26 12 8193-12288
+ 7 2 13-16 17 7 385-512 27 12 12289-16384
+ 8 3 17-24 18 8 513-768 28 13 16385-24576
+ 9 3 25-32 19 8 769-1024 29 13 24577-32768
+
+ 3.2.6. Compression with fixed Huffman codes (BTYPE=01)
+
+ The Huffman codes for the two alphabets are fixed, and are not
+ represented explicitly in the data. The Huffman code lengths
+ for the literal/length alphabet are:
+
+ Lit Value Bits Codes
+ --------- ---- -----
+ 0 - 143 8 00110000 through
+ 10111111
+ 144 - 255 9 110010000 through
+ 111111111
+ 256 - 279 7 0000000 through
+ 0010111
+ 280 - 287 8 11000000 through
+ 11000111
+
+
+
+Deutsch Informational [Page 12]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ The code lengths are sufficient to generate the actual codes,
+ as described above; we show the codes in the table for added
+ clarity. Literal/length values 286-287 will never actually
+ occur in the compressed data, but participate in the code
+ construction.
+
+ Distance codes 0-31 are represented by (fixed-length) 5-bit
+ codes, with possible additional bits as shown in the table
+ shown in Paragraph 3.2.5, above. Note that distance codes 30-
+ 31 will never actually occur in the compressed data.
+
+ 3.2.7. Compression with dynamic Huffman codes (BTYPE=10)
+
+ The Huffman codes for the two alphabets appear in the block
+ immediately after the header bits and before the actual
+ compressed data, first the literal/length code and then the
+ distance code. Each code is defined by a sequence of code
+ lengths, as discussed in Paragraph 3.2.2, above. For even
+ greater compactness, the code length sequences themselves are
+ compressed using a Huffman code. The alphabet for code lengths
+ is as follows:
+
+ 0 - 15: Represent code lengths of 0 - 15
+ 16: Copy the previous code length 3 - 6 times.
+ The next 2 bits indicate repeat length
+ (0 = 3, ... , 3 = 6)
+ Example: Codes 8, 16 (+2 bits 11),
+ 16 (+2 bits 10) will expand to
+ 12 code lengths of 8 (1 + 6 + 5)
+ 17: Repeat a code length of 0 for 3 - 10 times.
+ (3 bits of length)
+ 18: Repeat a code length of 0 for 11 - 138 times
+ (7 bits of length)
+
+ A code length of 0 indicates that the corresponding symbol in
+ the literal/length or distance alphabet will not occur in the
+ block, and should not participate in the Huffman code
+ construction algorithm given earlier. If only one distance
+ code is used, it is encoded using one bit, not zero bits; in
+ this case there is a single code length of one, with one unused
+ code. One distance code of zero bits means that there are no
+ distance codes used at all (the data is all literals).
+
+ We can now define the format of the block:
+
+ 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286)
+ 5 Bits: HDIST, # of Distance codes - 1 (1 - 32)
+ 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19)
+
+
+
+Deutsch Informational [Page 13]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ (HCLEN + 4) x 3 bits: code lengths for the code length
+ alphabet given just above, in the order: 16, 17, 18,
+ 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
+
+ These code lengths are interpreted as 3-bit integers
+ (0-7); as above, a code length of 0 means the
+ corresponding symbol (literal/length or distance code
+ length) is not used.
+
+ HLIT + 257 code lengths for the literal/length alphabet,
+ encoded using the code length Huffman code
+
+ HDIST + 1 code lengths for the distance alphabet,
+ encoded using the code length Huffman code
+
+ The actual compressed data of the block,
+ encoded using the literal/length and distance Huffman
+ codes
+
+ The literal/length symbol 256 (end of data),
+ encoded using the literal/length Huffman code
+
+ The code length repeat codes can cross from HLIT + 257 to the
+ HDIST + 1 code lengths. In other words, all code lengths form
+ a single sequence of HLIT + HDIST + 258 values.
+
+ 3.3. Compliance
+
+ A compressor may limit further the ranges of values specified in
+ the previous section and still be compliant; for example, it may
+ limit the range of backward pointers to some value smaller than
+ 32K. Similarly, a compressor may limit the size of blocks so that
+ a compressible block fits in memory.
+
+ A compliant decompressor must accept the full range of possible
+ values defined in the previous section, and must accept blocks of
+ arbitrary size.
+
+4. Compression algorithm details
+
+ While it is the intent of this document to define the "deflate"
+ compressed data format without reference to any particular
+ compression algorithm, the format is related to the compressed
+ formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below);
+ since many variations of LZ77 are patented, it is strongly
+ recommended that the implementor of a compressor follow the general
+ algorithm presented here, which is known not to be patented per se.
+ The material in this section is not part of the definition of the
+
+
+
+Deutsch Informational [Page 14]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+ specification per se, and a compressor need not follow it in order to
+ be compliant.
+
+ The compressor terminates a block when it determines that starting a
+ new block with fresh trees would be useful, or when the block size
+ fills up the compressor's block buffer.
+
+ The compressor uses a chained hash table to find duplicated strings,
+ using a hash function that operates on 3-byte sequences. At any
+ given point during compression, let XYZ be the next 3 input bytes to
+ be examined (not necessarily all different, of course). First, the
+ compressor examines the hash chain for XYZ. If the chain is empty,
+ the compressor simply writes out X as a literal byte and advances one
+ byte in the input. If the hash chain is not empty, indicating that
+ the sequence XYZ (or, if we are unlucky, some other 3 bytes with the
+ same hash function value) has occurred recently, the compressor
+ compares all strings on the XYZ hash chain with the actual input data
+ sequence starting at the current point, and selects the longest
+ match.
+
+ The compressor searches the hash chains starting with the most recent
+ strings, to favor small distances and thus take advantage of the
+ Huffman encoding. The hash chains are singly linked. There are no
+ deletions from the hash chains; the algorithm simply discards matches
+ that are too old. To avoid a worst-case situation, very long hash
+ chains are arbitrarily truncated at a certain length, determined by a
+ run-time parameter.
+
+ To improve overall compression, the compressor optionally defers the
+ selection of matches ("lazy matching"): after a match of length N has
+ been found, the compressor searches for a longer match starting at
+ the next input byte. If it finds a longer match, it truncates the
+ previous match to a length of one (thus producing a single literal
+ byte) and then emits the longer match. Otherwise, it emits the
+ original match, and, as described above, advances N bytes before
+ continuing.
+
+ Run-time parameters also control this "lazy match" procedure. If
+ compression ratio is most important, the compressor attempts a
+ complete second search regardless of the length of the first match.
+ In the normal case, if the current match is "long enough", the
+ compressor reduces the search for a longer match, thus speeding up
+ the process. If speed is most important, the compressor inserts new
+ strings in the hash table only when no match was found, or when the
+ match is not "too long". This degrades the compression ratio but
+ saves time since there are both fewer insertions and fewer searches.
+
+
+
+
+
+Deutsch Informational [Page 15]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+5. References
+
+ [1] Huffman, D. A., "A Method for the Construction of Minimum
+ Redundancy Codes", Proceedings of the Institute of Radio
+ Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101.
+
+ [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data
+ Compression", IEEE Transactions on Information Theory, Vol. 23,
+ No. 3, pp. 337-343.
+
+ [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources,
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources,
+ available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/
+
+ [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix
+ encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169.
+
+ [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes,"
+ Comm. ACM, 33,4, April 1990, pp. 449-459.
+
+6. Security Considerations
+
+ Any data compression method involves the reduction of redundancy in
+ the data. Consequently, any corruption of the data is likely to have
+ severe effects and be difficult to correct. Uncompressed text, on
+ the other hand, will probably still be readable despite the presence
+ of some corrupted bytes.
+
+ It is recommended that systems using this data format provide some
+ means of validating the integrity of the compressed data. See
+ reference [3], for example.
+
+7. Source code
+
+ Source code for a C language implementation of a "deflate" compliant
+ compressor and decompressor is available within the zlib package at
+ ftp://ftp.uu.net/pub/archiving/zip/zlib/.
+
+8. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Phil Katz designed the deflate format. Jean-Loup Gailly and Mark
+ Adler wrote the related software described in this specification.
+ Glenn Randers-Pehrson converted this document to RFC and HTML format.
+
+
+
+Deutsch Informational [Page 16]
+\f
+RFC 1951 DEFLATE Compressed Data Format Specification May 1996
+
+
+9. Author's Address
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+ Questions about the technical content of this specification can be
+ sent by email to:
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to:
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 17]
+\f
--- /dev/null
+
+
+
+
+
+
+Network Working Group P. Deutsch
+Request for Comments: 1952 Aladdin Enterprises
+Category: Informational May 1996
+
+
+ GZIP file format specification version 4.3
+
+Status of This Memo
+
+ This memo provides information for the Internet community. This memo
+ does not specify an Internet standard of any kind. Distribution of
+ this memo is unlimited.
+
+IESG Note:
+
+ The IESG takes no position on the validity of any Intellectual
+ Property Rights statements contained in this document.
+
+Notices
+
+ Copyright (c) 1996 L. Peter Deutsch
+
+ Permission is granted to copy and distribute this document for any
+ purpose and without charge, including translations into other
+ languages and incorporation into compilations, provided that the
+ copyright notice and this notice are preserved, and that any
+ substantive changes or deletions from the original are clearly
+ marked.
+
+ A pointer to the latest version of this and related documentation in
+ HTML format can be found at the URL
+ <ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html>.
+
+Abstract
+
+ This specification defines a lossless compressed data format that is
+ compatible with the widely used GZIP utility. The format includes a
+ cyclic redundancy check value for detecting data corruption. The
+ format presently uses the DEFLATE method of compression but can be
+ easily extended to use other compression methods. The format can be
+ implemented readily in a manner not covered by patents.
+
+
+
+
+
+
+
+
+
+
+Deutsch Informational [Page 1]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+Table of Contents
+
+ 1. Introduction ................................................... 2
+ 1.1. Purpose ................................................... 2
+ 1.2. Intended audience ......................................... 3
+ 1.3. Scope ..................................................... 3
+ 1.4. Compliance ................................................ 3
+ 1.5. Definitions of terms and conventions used ................. 3
+ 1.6. Changes from previous versions ............................ 3
+ 2. Detailed specification ......................................... 4
+ 2.1. Overall conventions ....................................... 4
+ 2.2. File format ............................................... 5
+ 2.3. Member format ............................................. 5
+ 2.3.1. Member header and trailer ........................... 6
+ 2.3.1.1. Extra field ................................... 8
+ 2.3.1.2. Compliance .................................... 9
+ 3. References .................................................. 9
+ 4. Security Considerations .................................... 10
+ 5. Acknowledgements ........................................... 10
+ 6. Author's Address ........................................... 10
+ 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11
+ 8. Appendix: Sample CRC Code .................................. 11
+
+1. Introduction
+
+ 1.1. Purpose
+
+ The purpose of this specification is to define a lossless
+ compressed data format that:
+
+ * Is independent of CPU type, operating system, file system,
+ and character set, and hence can be used for interchange;
+ * Can compress or decompress a data stream (as opposed to a
+ randomly accessible file) to produce another data stream,
+ using only an a priori bounded amount of intermediate
+ storage, and hence can be used in data communications or
+ similar structures such as Unix filters;
+ * Compresses data with efficiency comparable to the best
+ currently available general-purpose compression methods,
+ and in particular considerably better than the "compress"
+ program;
+ * Can be implemented readily in a manner not covered by
+ patents, and hence can be practiced freely;
+ * Is compatible with the file format produced by the current
+ widely used gzip utility, in that conforming decompressors
+ will be able to read data produced by the existing gzip
+ compressor.
+
+
+
+
+Deutsch Informational [Page 2]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ The data format defined by this specification does not attempt to:
+
+ * Provide random access to compressed data;
+ * Compress specialized data (e.g., raster graphics) as well as
+ the best currently available specialized algorithms.
+
+ 1.2. Intended audience
+
+ This specification is intended for use by implementors of software
+ to compress data into gzip format and/or decompress data from gzip
+ format.
+
+ The text of the specification assumes a basic background in
+ programming at the level of bits and other primitive data
+ representations.
+
+ 1.3. Scope
+
+ The specification specifies a compression method and a file format
+ (the latter assuming only that a file can store a sequence of
+ arbitrary bytes). It does not specify any particular interface to
+ a file system or anything about character sets or encodings
+ (except for file names and comments, which are optional).
+
+ 1.4. Compliance
+
+ Unless otherwise indicated below, a compliant decompressor must be
+ able to accept and decompress any file that conforms to all the
+ specifications presented here; a compliant compressor must produce
+ files that conform to all the specifications presented here. The
+ material in the appendices is not part of the specification per se
+ and is not relevant to compliance.
+
+ 1.5. Definitions of terms and conventions used
+
+ byte: 8 bits stored or transmitted as a unit (same as an octet).
+ (For this specification, a byte is exactly 8 bits, even on
+ machines which store a character on a number of bits different
+ from 8.) See below for the numbering of bits within a byte.
+
+ 1.6. Changes from previous versions
+
+ There have been no technical changes to the gzip format since
+ version 4.1 of this specification. In version 4.2, some
+ terminology was changed, and the sample CRC code was rewritten for
+ clarity and to eliminate the requirement for the caller to do pre-
+ and post-conditioning. Version 4.3 is a conversion of the
+ specification to RFC style.
+
+
+
+Deutsch Informational [Page 3]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+2. Detailed specification
+
+ 2.1. Overall conventions
+
+ In the diagrams below, a box like this:
+
+ +---+
+ | | <-- the vertical bars might be missing
+ +---+
+
+ represents one byte; a box like this:
+
+ +==============+
+ | |
+ +==============+
+
+ represents a variable number of bytes.
+
+ Bytes stored within a computer do not have a "bit order", since
+ they are always treated as a unit. However, a byte considered as
+ an integer between 0 and 255 does have a most- and least-
+ significant bit, and since we write numbers with the most-
+ significant digit on the left, we also write bytes with the most-
+ significant bit on the left. In the diagrams below, we number the
+ bits of a byte so that bit 0 is the least-significant bit, i.e.,
+ the bits are numbered:
+
+ +--------+
+ |76543210|
+ +--------+
+
+ This document does not address the issue of the order in which
+ bits of a byte are transmitted on a bit-sequential medium, since
+ the data format described here is byte- rather than bit-oriented.
+
+ Within a computer, a number may occupy multiple bytes. All
+ multi-byte numbers in the format described here are stored with
+ the least-significant byte first (at the lower memory address).
+ For example, the decimal number 520 is stored as:
+
+ 0 1
+ +--------+--------+
+ |00001000|00000010|
+ +--------+--------+
+ ^ ^
+ | |
+ | + more significant byte = 2 x 256
+ + less significant byte = 8
+
+
+
+Deutsch Informational [Page 4]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 2.2. File format
+
+ A gzip file consists of a series of "members" (compressed data
+ sets). The format of each member is specified in the following
+ section. The members simply appear one after another in the file,
+ with no additional information before, between, or after them.
+
+ 2.3. Member format
+
+ Each member has the following structure:
+
+ +---+---+---+---+---+---+---+---+---+---+
+ |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->)
+ +---+---+---+---+---+---+---+---+---+---+
+
+ (if FLG.FEXTRA set)
+
+ +---+---+=================================+
+ | XLEN |...XLEN bytes of "extra field"...| (more-->)
+ +---+---+=================================+
+
+ (if FLG.FNAME set)
+
+ +=========================================+
+ |...original file name, zero-terminated...| (more-->)
+ +=========================================+
+
+ (if FLG.FCOMMENT set)
+
+ +===================================+
+ |...file comment, zero-terminated...| (more-->)
+ +===================================+
+
+ (if FLG.FHCRC set)
+
+ +---+---+
+ | CRC16 |
+ +---+---+
+
+ +=======================+
+ |...compressed blocks...| (more-->)
+ +=======================+
+
+ 0 1 2 3 4 5 6 7
+ +---+---+---+---+---+---+---+---+
+ | CRC32 | ISIZE |
+ +---+---+---+---+---+---+---+---+
+
+
+
+
+Deutsch Informational [Page 5]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 2.3.1. Member header and trailer
+
+ ID1 (IDentification 1)
+ ID2 (IDentification 2)
+ These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139
+ (0x8b, \213), to identify the file as being in gzip format.
+
+ CM (Compression Method)
+ This identifies the compression method used in the file. CM
+ = 0-7 are reserved. CM = 8 denotes the "deflate"
+ compression method, which is the one customarily used by
+ gzip and which is documented elsewhere.
+
+ FLG (FLaGs)
+ This flag byte is divided into individual bits as follows:
+
+ bit 0 FTEXT
+ bit 1 FHCRC
+ bit 2 FEXTRA
+ bit 3 FNAME
+ bit 4 FCOMMENT
+ bit 5 reserved
+ bit 6 reserved
+ bit 7 reserved
+
+ If FTEXT is set, the file is probably ASCII text. This is
+ an optional indication, which the compressor may set by
+ checking a small amount of the input data to see whether any
+ non-ASCII characters are present. In case of doubt, FTEXT
+ is cleared, indicating binary data. For systems which have
+ different file formats for ascii text and binary data, the
+ decompressor can use FTEXT to choose the appropriate format.
+ We deliberately do not specify the algorithm used to set
+ this bit, since a compressor always has the option of
+ leaving it cleared and a decompressor always has the option
+ of ignoring it and letting some other program handle issues
+ of data conversion.
+
+ If FHCRC is set, a CRC16 for the gzip header is present,
+ immediately before the compressed data. The CRC16 consists
+ of the two least significant bytes of the CRC32 for all
+ bytes of the gzip header up to and not including the CRC16.
+ [The FHCRC bit was never set by versions of gzip up to
+ 1.2.4, even though it was documented with a different
+ meaning in gzip 1.2.4.]
+
+ If FEXTRA is set, optional extra fields are present, as
+ described in a following section.
+
+
+
+Deutsch Informational [Page 6]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ If FNAME is set, an original file name is present,
+ terminated by a zero byte. The name must consist of ISO
+ 8859-1 (LATIN-1) characters; on operating systems using
+ EBCDIC or any other character set for file names, the name
+ must be translated to the ISO LATIN-1 character set. This
+ is the original name of the file being compressed, with any
+ directory components removed, and, if the file being
+ compressed is on a file system with case insensitive names,
+ forced to lower case. There is no original file name if the
+ data was compressed from a source other than a named file;
+ for example, if the source was stdin on a Unix system, there
+ is no file name.
+
+ If FCOMMENT is set, a zero-terminated file comment is
+ present. This comment is not interpreted; it is only
+ intended for human consumption. The comment must consist of
+ ISO 8859-1 (LATIN-1) characters. Line breaks should be
+ denoted by a single line feed character (10 decimal).
+
+ Reserved FLG bits must be zero.
+
+ MTIME (Modification TIME)
+ This gives the most recent modification time of the original
+ file being compressed. The time is in Unix format, i.e.,
+ seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this
+ may cause problems for MS-DOS and other systems that use
+ local rather than Universal time.) If the compressed data
+ did not come from a file, MTIME is set to the time at which
+ compression started. MTIME = 0 means no time stamp is
+ available.
+
+ XFL (eXtra FLags)
+ These flags are available for use by specific compression
+ methods. The "deflate" method (CM = 8) sets these flags as
+ follows:
+
+ XFL = 2 - compressor used maximum compression,
+ slowest algorithm
+ XFL = 4 - compressor used fastest algorithm
+
+ OS (Operating System)
+ This identifies the type of file system on which compression
+ took place. This may be useful in determining end-of-line
+ convention for text files. The currently defined values are
+ as follows:
+
+
+
+
+
+
+Deutsch Informational [Page 7]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32)
+ 1 - Amiga
+ 2 - VMS (or OpenVMS)
+ 3 - Unix
+ 4 - VM/CMS
+ 5 - Atari TOS
+ 6 - HPFS filesystem (OS/2, NT)
+ 7 - Macintosh
+ 8 - Z-System
+ 9 - CP/M
+ 10 - TOPS-20
+ 11 - NTFS filesystem (NT)
+ 12 - QDOS
+ 13 - Acorn RISCOS
+ 255 - unknown
+
+ XLEN (eXtra LENgth)
+ If FLG.FEXTRA is set, this gives the length of the optional
+ extra field. See below for details.
+
+ CRC32 (CRC-32)
+ This contains a Cyclic Redundancy Check value of the
+ uncompressed data computed according to CRC-32 algorithm
+ used in the ISO 3309 standard and in section 8.1.1.6.2 of
+ ITU-T recommendation V.42. (See http://www.iso.ch for
+ ordering ISO documents. See gopher://info.itu.ch for an
+ online version of ITU-T V.42.)
+
+ ISIZE (Input SIZE)
+ This contains the size of the original (uncompressed) input
+ data modulo 2^32.
+
+ 2.3.1.1. Extra field
+
+ If the FLG.FEXTRA bit is set, an "extra field" is present in
+ the header, with total length XLEN bytes. It consists of a
+ series of subfields, each of the form:
+
+ +---+---+---+---+==================================+
+ |SI1|SI2| LEN |... LEN bytes of subfield data ...|
+ +---+---+---+---+==================================+
+
+ SI1 and SI2 provide a subfield ID, typically two ASCII letters
+ with some mnemonic value. Jean-Loup Gailly
+ <gzip@prep.ai.mit.edu> is maintaining a registry of subfield
+ IDs; please send him any subfield ID you wish to use. Subfield
+ IDs with SI2 = 0 are reserved for future use. The following
+ IDs are currently defined:
+
+
+
+Deutsch Informational [Page 8]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ SI1 SI2 Data
+ ---------- ---------- ----
+ 0x41 ('A') 0x70 ('P') Apollo file type information
+
+ LEN gives the length of the subfield data, excluding the 4
+ initial bytes.
+
+ 2.3.1.2. Compliance
+
+ A compliant compressor must produce files with correct ID1,
+ ID2, CM, CRC32, and ISIZE, but may set all the other fields in
+ the fixed-length part of the header to default values (255 for
+ OS, 0 for all others). The compressor must set all reserved
+ bits to zero.
+
+ A compliant decompressor must check ID1, ID2, and CM, and
+ provide an error indication if any of these have incorrect
+ values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC
+ at least so it can skip over the optional fields if they are
+ present. It need not examine any other part of the header or
+ trailer; in particular, a decompressor may ignore FTEXT and OS
+ and always produce binary output, and still be compliant. A
+ compliant decompressor must give an error indication if any
+ reserved bit is non-zero, since such a bit could indicate the
+ presence of a new field that would cause subsequent data to be
+ interpreted incorrectly.
+
+3. References
+
+ [1] "Information Processing - 8-bit single-byte coded graphic
+ character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987).
+ The ISO 8859-1 (Latin-1) character set is a superset of 7-bit
+ ASCII. Files defining this character set are available as
+ iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/
+
+ [2] ISO 3309
+
+ [3] ITU-T recommendation V.42
+
+ [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
+ available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+
+ [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in
+ ftp://prep.ai.mit.edu/pub/gnu/
+
+ [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table
+ Look-Up", Communications of the ACM, 31(8), pp.1008-1013.
+
+
+
+
+Deutsch Informational [Page 9]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal,
+ pp.118-133.
+
+ [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt,
+ describing the CRC concept.
+
+4. Security Considerations
+
+ Any data compression method involves the reduction of redundancy in
+ the data. Consequently, any corruption of the data is likely to have
+ severe effects and be difficult to correct. Uncompressed text, on
+ the other hand, will probably still be readable despite the presence
+ of some corrupted bytes.
+
+ It is recommended that systems using this data format provide some
+ means of validating the integrity of the compressed data, such as by
+ setting and checking the CRC-32 check value.
+
+5. Acknowledgements
+
+ Trademarks cited in this document are the property of their
+ respective owners.
+
+ Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler,
+ the related software described in this specification. Glenn
+ Randers-Pehrson converted this document to RFC and HTML format.
+
+6. Author's Address
+
+ L. Peter Deutsch
+ Aladdin Enterprises
+ 203 Santa Margarita Ave.
+ Menlo Park, CA 94025
+
+ Phone: (415) 322-0103 (AM only)
+ FAX: (415) 322-1734
+ EMail: <ghost@aladdin.com>
+
+ Questions about the technical content of this specification can be
+ sent by email to:
+
+ Jean-Loup Gailly <gzip@prep.ai.mit.edu> and
+ Mark Adler <madler@alumni.caltech.edu>
+
+ Editorial comments on this specification can be sent by email to:
+
+ L. Peter Deutsch <ghost@aladdin.com> and
+ Glenn Randers-Pehrson <randeg@alumni.rpi.edu>
+
+
+
+Deutsch Informational [Page 10]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+7. Appendix: Jean-Loup Gailly's gzip utility
+
+ The most widely used implementation of gzip compression, and the
+ original documentation on which this specification is based, were
+ created by Jean-Loup Gailly <gzip@prep.ai.mit.edu>. Since this
+ implementation is a de facto standard, we mention some more of its
+ features here. Again, the material in this section is not part of
+ the specification per se, and implementations need not follow it to
+ be compliant.
+
+ When compressing or decompressing a file, gzip preserves the
+ protection, ownership, and modification time attributes on the local
+ file system, since there is no provision for representing protection
+ attributes in the gzip file format itself. Since the file format
+ includes a modification time, the gzip decompressor provides a
+ command line switch that assigns the modification time from the file,
+ rather than the local modification time of the compressed input, to
+ the decompressed output.
+
+8. Appendix: Sample CRC Code
+
+ The following sample code represents a practical implementation of
+ the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42
+ for a formal specification.)
+
+ The sample code is in the ANSI C programming language. Non C users
+ may find it easier to read with these hints:
+
+ & Bitwise AND operator.
+ ^ Bitwise exclusive-OR operator.
+ >> Bitwise right shift operator. When applied to an
+ unsigned quantity, as here, right shift inserts zero
+ bit(s) at the left.
+ ! Logical NOT operator.
+ ++ "n++" increments the variable n.
+ 0xNNN 0x introduces a hexadecimal (base 16) constant.
+ Suffix L indicates a long value (at least 32 bits).
+
+ /* Table of CRCs of all 8-bit messages. */
+ unsigned long crc_table[256];
+
+ /* Flag: has the table been computed? Initially false. */
+ int crc_table_computed = 0;
+
+ /* Make the table for a fast CRC. */
+ void make_crc_table(void)
+ {
+ unsigned long c;
+
+
+
+Deutsch Informational [Page 11]
+\f
+RFC 1952 GZIP File Format Specification May 1996
+
+
+ int n, k;
+ for (n = 0; n < 256; n++) {
+ c = (unsigned long) n;
+ for (k = 0; k < 8; k++) {
+ if (c & 1) {
+ c = 0xedb88320L ^ (c >> 1);
+ } else {
+ c = c >> 1;
+ }
+ }
+ crc_table[n] = c;
+ }
+ crc_table_computed = 1;
+ }
+
+ /*
+ Update a running crc with the bytes buf[0..len-1] and return
+ the updated crc. The crc should be initialized to zero. Pre- and
+ post-conditioning (one's complement) is performed within this
+ function so it shouldn't be done by the caller. Usage example:
+
+ unsigned long crc = 0L;
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = update_crc(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+ */
+ unsigned long update_crc(unsigned long crc,
+ unsigned char *buf, int len)
+ {
+ unsigned long c = crc ^ 0xffffffffL;
+ int n;
+
+ if (!crc_table_computed)
+ make_crc_table();
+ for (n = 0; n < len; n++) {
+ c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8);
+ }
+ return c ^ 0xffffffffL;
+ }
+
+ /* Return the CRC of the bytes buf[0..len-1]. */
+ unsigned long crc(unsigned char *buf, int len)
+ {
+ return update_crc(0L, buf, len);
+ }
+
+
+
+
+Deutsch Informational [Page 12]
+\f
--- /dev/null
+A Fast Method for Identifying Plain Text Files
+==============================================
+
+
+Introduction
+------------
+
+Given a file coming from an unknown source, it is sometimes desirable
+to find out whether the format of that file is plain text. Although
+this may appear like a simple task, a fully accurate detection of the
+file type requires heavy-duty semantic analysis on the file contents.
+It is, however, possible to obtain satisfactory results by employing
+various heuristics.
+
+Previous versions of PKZip and other zip-compatible compression tools
+were using a crude detection scheme: if more than 80% (4/5) of the bytes
+found in a certain buffer are within the range [7..127], the file is
+labeled as plain text, otherwise it is labeled as binary. A prominent
+limitation of this scheme is the restriction to Latin-based alphabets.
+Other alphabets, like Greek, Cyrillic or Asian, make extensive use of
+the bytes within the range [128..255], and texts using these alphabets
+are most often misidentified by this scheme; in other words, the rate
+of false negatives is sometimes too high, which means that the recall
+is low. Another weakness of this scheme is a reduced precision, due to
+the false positives that may occur when binary files containing large
+amounts of textual characters are misidentified as plain text.
+
+In this article we propose a new, simple detection scheme that features
+a much increased precision and a near-100% recall. This scheme is
+designed to work on ASCII, Unicode and other ASCII-derived alphabets,
+and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.)
+and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings
+(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however.
+
+
+The Algorithm
+-------------
+
+The algorithm works by dividing the set of bytecodes [0..255] into three
+categories:
+- The white list of textual bytecodes:
+ 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255.
+- The gray list of tolerated bytecodes:
+ 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC).
+- The black list of undesired, non-textual bytecodes:
+ 0 (NUL) to 6, 14 to 31.
+
+If a file contains at least one byte that belongs to the white list and
+no byte that belongs to the black list, then the file is categorized as
+plain text; otherwise, it is categorized as binary. (The boundary case,
+when the file is empty, automatically falls into the latter category.)
+
+
+Rationale
+---------
+
+The idea behind this algorithm relies on two observations.
+
+The first observation is that, although the full range of 7-bit codes
+[0..127] is properly specified by the ASCII standard, most control
+characters in the range [0..31] are not used in practice. The only
+widely-used, almost universally-portable control codes are 9 (TAB),
+10 (LF) and 13 (CR). There are a few more control codes that are
+recognized on a reduced range of platforms and text viewers/editors:
+7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these
+codes are rarely (if ever) used alone, without being accompanied by
+some printable text. Even the newer, portable text formats such as
+XML avoid using control characters outside the list mentioned here.
+
+The second observation is that most of the binary files tend to contain
+control characters, especially 0 (NUL). Even though the older text
+detection schemes observe the presence of non-ASCII codes from the range
+[128..255], the precision rarely has to suffer if this upper range is
+labeled as textual, because the files that are genuinely binary tend to
+contain both control characters and codes from the upper range. On the
+other hand, the upper range needs to be labeled as textual, because it
+is used by virtually all ASCII extensions. In particular, this range is
+used for encoding non-Latin scripts.
+
+Since there is no counting involved, other than simply observing the
+presence or the absence of some byte values, the algorithm produces
+consistent results, regardless what alphabet encoding is being used.
+(If counting were involved, it could be possible to obtain different
+results on a text encoded, say, using ISO-8859-16 versus UTF-8.)
+
+There is an extra category of plain text files that are "polluted" with
+one or more black-listed codes, either by mistake or by peculiar design
+considerations. In such cases, a scheme that tolerates a small fraction
+of black-listed codes would provide an increased recall (i.e. more true
+positives). This, however, incurs a reduced precision overall, since
+false positives are more likely to appear in binary files that contain
+large chunks of textual data. Furthermore, "polluted" plain text should
+be regarded as binary by general-purpose text detection schemes, because
+general-purpose text processing algorithms might not be applicable.
+Under this premise, it is safe to say that our detection method provides
+a near-100% recall.
+
+Experiments have been run on many files coming from various platforms
+and applications. We tried plain text files, system logs, source code,
+formatted office documents, compiled object code, etc. The results
+confirm the optimistic assumptions about the capabilities of this
+algorithm.
+
+
+--
+Cosmin Truta
+Last updated: 2006-May-28
--- /dev/null
+This directory contains examples of the use of zlib and other relevant
+programs and documentation.
+
+enough.c
+ calculation and justification of ENOUGH parameter in inftrees.h
+ - calculates the maximum table space used in inflate tree
+ construction over all possible Huffman codes
+
+fitblk.c
+ compress just enough input to nearly fill a requested output size
+ - zlib isn't designed to do this, but fitblk does it anyway
+
+gun.c
+ uncompress a gzip file
+ - illustrates the use of inflateBack() for high speed file-to-file
+ decompression using call-back functions
+ - is approximately twice as fast as gzip -d
+ - also provides Unix uncompress functionality, again twice as fast
+
+gzappend.c
+ append to a gzip file
+ - illustrates the use of the Z_BLOCK flush parameter for inflate()
+ - illustrates the use of deflatePrime() to start at any bit
+
+gzjoin.c
+ join gzip files without recalculating the crc or recompressing
+ - illustrates the use of the Z_BLOCK flush parameter for inflate()
+ - illustrates the use of crc32_combine()
+
+gzlog.c
+gzlog.h
+ efficiently and robustly maintain a message log file in gzip format
+ - illustrates use of raw deflate, Z_PARTIAL_FLUSH, deflatePrime(),
+ and deflateSetDictionary()
+ - illustrates use of a gzip header extra field
+
+zlib_how.html
+ painfully comprehensive description of zpipe.c (see below)
+ - describes in excruciating detail the use of deflate() and inflate()
+
+zpipe.c
+ reads and writes zlib streams from stdin to stdout
+ - illustrates the proper use of deflate() and inflate()
+ - deeply commented in zlib_how.html (see above)
+
+zran.c
+ index a zlib or gzip stream and randomly access it
+ - illustrates the use of Z_BLOCK, inflatePrime(), and
+ inflateSetDictionary() to provide random access
--- /dev/null
+/* enough.c -- determine the maximum size of inflate's Huffman code tables over
+ * all possible valid and complete Huffman codes, subject to a length limit.
+ * Copyright (C) 2007, 2008, 2012 Mark Adler
+ * Version 1.4 18 August 2012 Mark Adler
+ */
+
+/* Version history:
+ 1.0 3 Jan 2007 First version (derived from codecount.c version 1.4)
+ 1.1 4 Jan 2007 Use faster incremental table usage computation
+ Prune examine() search on previously visited states
+ 1.2 5 Jan 2007 Comments clean up
+ As inflate does, decrease root for short codes
+ Refuse cases where inflate would increase root
+ 1.3 17 Feb 2008 Add argument for initial root table size
+ Fix bug for initial root table size == max - 1
+ Use a macro to compute the history index
+ 1.4 18 Aug 2012 Avoid shifts more than bits in type (caused endless loop!)
+ Clean up comparisons of different types
+ Clean up code indentation
+ */
+
+/*
+ Examine all possible Huffman codes for a given number of symbols and a
+ maximum code length in bits to determine the maximum table size for zilb's
+ inflate. Only complete Huffman codes are counted.
+
+ Two codes are considered distinct if the vectors of the number of codes per
+ length are not identical. So permutations of the symbol assignments result
+ in the same code for the counting, as do permutations of the assignments of
+ the bit values to the codes (i.e. only canonical codes are counted).
+
+ We build a code from shorter to longer lengths, determining how many symbols
+ are coded at each length. At each step, we have how many symbols remain to
+ be coded, what the last code length used was, and how many bit patterns of
+ that length remain unused. Then we add one to the code length and double the
+ number of unused patterns to graduate to the next code length. We then
+ assign all portions of the remaining symbols to that code length that
+ preserve the properties of a correct and eventually complete code. Those
+ properties are: we cannot use more bit patterns than are available; and when
+ all the symbols are used, there are exactly zero possible bit patterns
+ remaining.
+
+ The inflate Huffman decoding algorithm uses two-level lookup tables for
+ speed. There is a single first-level table to decode codes up to root bits
+ in length (root == 9 in the current inflate implementation). The table
+ has 1 << root entries and is indexed by the next root bits of input. Codes
+ shorter than root bits have replicated table entries, so that the correct
+ entry is pointed to regardless of the bits that follow the short code. If
+ the code is longer than root bits, then the table entry points to a second-
+ level table. The size of that table is determined by the longest code with
+ that root-bit prefix. If that longest code has length len, then the table
+ has size 1 << (len - root), to index the remaining bits in that set of
+ codes. Each subsequent root-bit prefix then has its own sub-table. The
+ total number of table entries required by the code is calculated
+ incrementally as the number of codes at each bit length is populated. When
+ all of the codes are shorter than root bits, then root is reduced to the
+ longest code length, resulting in a single, smaller, one-level table.
+
+ The inflate algorithm also provides for small values of root (relative to
+ the log2 of the number of symbols), where the shortest code has more bits
+ than root. In that case, root is increased to the length of the shortest
+ code. This program, by design, does not handle that case, so it is verified
+ that the number of symbols is less than 2^(root + 1).
+
+ In order to speed up the examination (by about ten orders of magnitude for
+ the default arguments), the intermediate states in the build-up of a code
+ are remembered and previously visited branches are pruned. The memory
+ required for this will increase rapidly with the total number of symbols and
+ the maximum code length in bits. However this is a very small price to pay
+ for the vast speedup.
+
+ First, all of the possible Huffman codes are counted, and reachable
+ intermediate states are noted by a non-zero count in a saved-results array.
+ Second, the intermediate states that lead to (root + 1) bit or longer codes
+ are used to look at all sub-codes from those junctures for their inflate
+ memory usage. (The amount of memory used is not affected by the number of
+ codes of root bits or less in length.) Third, the visited states in the
+ construction of those sub-codes and the associated calculation of the table
+ size is recalled in order to avoid recalculating from the same juncture.
+ Beginning the code examination at (root + 1) bit codes, which is enabled by
+ identifying the reachable nodes, accounts for about six of the orders of
+ magnitude of improvement for the default arguments. About another four
+ orders of magnitude come from not revisiting previous states. Out of
+ approximately 2x10^16 possible Huffman codes, only about 2x10^6 sub-codes
+ need to be examined to cover all of the possible table memory usage cases
+ for the default arguments of 286 symbols limited to 15-bit codes.
+
+ Note that an unsigned long long type is used for counting. It is quite easy
+ to exceed the capacity of an eight-byte integer with a large number of
+ symbols and a large maximum code length, so multiple-precision arithmetic
+ would need to replace the unsigned long long arithmetic in that case. This
+ program will abort if an overflow occurs. The big_t type identifies where
+ the counting takes place.
+
+ An unsigned long long type is also used for calculating the number of
+ possible codes remaining at the maximum length. This limits the maximum
+ code length to the number of bits in a long long minus the number of bits
+ needed to represent the symbols in a flat code. The code_t type identifies
+ where the bit pattern counting takes place.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#define local static
+
+/* special data types */
+typedef unsigned long long big_t; /* type for code counting */
+typedef unsigned long long code_t; /* type for bit pattern counting */
+struct tab { /* type for been here check */
+ size_t len; /* length of bit vector in char's */
+ char *vec; /* allocated bit vector */
+};
+
+/* The array for saving results, num[], is indexed with this triplet:
+
+ syms: number of symbols remaining to code
+ left: number of available bit patterns at length len
+ len: number of bits in the codes currently being assigned
+
+ Those indices are constrained thusly when saving results:
+
+ syms: 3..totsym (totsym == total symbols to code)
+ left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6)
+ len: 1..max - 1 (max == maximum code length in bits)
+
+ syms == 2 is not saved since that immediately leads to a single code. left
+ must be even, since it represents the number of available bit patterns at
+ the current length, which is double the number at the previous length.
+ left ends at syms-1 since left == syms immediately results in a single code.
+ (left > sym is not allowed since that would result in an incomplete code.)
+ len is less than max, since the code completes immediately when len == max.
+
+ The offset into the array is calculated for the three indices with the
+ first one (syms) being outermost, and the last one (len) being innermost.
+ We build the array with length max-1 lists for the len index, with syms-3
+ of those for each symbol. There are totsym-2 of those, with each one
+ varying in length as a function of sym. See the calculation of index in
+ count() for the index, and the calculation of size in main() for the size
+ of the array.
+
+ For the deflate example of 286 symbols limited to 15-bit codes, the array
+ has 284,284 entries, taking up 2.17 MB for an 8-byte big_t. More than
+ half of the space allocated for saved results is actually used -- not all
+ possible triplets are reached in the generation of valid Huffman codes.
+ */
+
+/* The array for tracking visited states, done[], is itself indexed identically
+ to the num[] array as described above for the (syms, left, len) triplet.
+ Each element in the array is further indexed by the (mem, rem) doublet,
+ where mem is the amount of inflate table space used so far, and rem is the
+ remaining unused entries in the current inflate sub-table. Each indexed
+ element is simply one bit indicating whether the state has been visited or
+ not. Since the ranges for mem and rem are not known a priori, each bit
+ vector is of a variable size, and grows as needed to accommodate the visited
+ states. mem and rem are used to calculate a single index in a triangular
+ array. Since the range of mem is expected in the default case to be about
+ ten times larger than the range of rem, the array is skewed to reduce the
+ memory usage, with eight times the range for mem than for rem. See the
+ calculations for offset and bit in beenhere() for the details.
+
+ For the deflate example of 286 symbols limited to 15-bit codes, the bit
+ vectors grow to total approximately 21 MB, in addition to the 4.3 MB done[]
+ array itself.
+ */
+
+/* Globals to avoid propagating constants or constant pointers recursively */
+local int max; /* maximum allowed bit length for the codes */
+local int root; /* size of base code table in bits */
+local int large; /* largest code table so far */
+local size_t size; /* number of elements in num and done */
+local int *code; /* number of symbols assigned to each bit length */
+local big_t *num; /* saved results array for code counting */
+local struct tab *done; /* states already evaluated array */
+
+/* Index function for num[] and done[] */
+#define INDEX(i,j,k) (((size_t)((i-1)>>1)*((i-2)>>1)+(j>>1)-1)*(max-1)+k-1)
+
+/* Free allocated space. Uses globals code, num, and done. */
+local void cleanup(void)
+{
+ size_t n;
+
+ if (done != NULL) {
+ for (n = 0; n < size; n++)
+ if (done[n].len)
+ free(done[n].vec);
+ free(done);
+ }
+ if (num != NULL)
+ free(num);
+ if (code != NULL)
+ free(code);
+}
+
+/* Return the number of possible Huffman codes using bit patterns of lengths
+ len through max inclusive, coding syms symbols, with left bit patterns of
+ length len unused -- return -1 if there is an overflow in the counting.
+ Keep a record of previous results in num to prevent repeating the same
+ calculation. Uses the globals max and num. */
+local big_t count(int syms, int len, int left)
+{
+ big_t sum; /* number of possible codes from this juncture */
+ big_t got; /* value returned from count() */
+ int least; /* least number of syms to use at this juncture */
+ int most; /* most number of syms to use at this juncture */
+ int use; /* number of bit patterns to use in next call */
+ size_t index; /* index of this case in *num */
+
+ /* see if only one possible code */
+ if (syms == left)
+ return 1;
+
+ /* note and verify the expected state */
+ assert(syms > left && left > 0 && len < max);
+
+ /* see if we've done this one already */
+ index = INDEX(syms, left, len);
+ got = num[index];
+ if (got)
+ return got; /* we have -- return the saved result */
+
+ /* we need to use at least this many bit patterns so that the code won't be
+ incomplete at the next length (more bit patterns than symbols) */
+ least = (left << 1) - syms;
+ if (least < 0)
+ least = 0;
+
+ /* we can use at most this many bit patterns, lest there not be enough
+ available for the remaining symbols at the maximum length (if there were
+ no limit to the code length, this would become: most = left - 1) */
+ most = (((code_t)left << (max - len)) - syms) /
+ (((code_t)1 << (max - len)) - 1);
+
+ /* count all possible codes from this juncture and add them up */
+ sum = 0;
+ for (use = least; use <= most; use++) {
+ got = count(syms - use, len + 1, (left - use) << 1);
+ sum += got;
+ if (got == (big_t)0 - 1 || sum < got) /* overflow */
+ return (big_t)0 - 1;
+ }
+
+ /* verify that all recursive calls are productive */
+ assert(sum != 0);
+
+ /* save the result and return it */
+ num[index] = sum;
+ return sum;
+}
+
+/* Return true if we've been here before, set to true if not. Set a bit in a
+ bit vector to indicate visiting this state. Each (syms,len,left) state
+ has a variable size bit vector indexed by (mem,rem). The bit vector is
+ lengthened if needed to allow setting the (mem,rem) bit. */
+local int beenhere(int syms, int len, int left, int mem, int rem)
+{
+ size_t index; /* index for this state's bit vector */
+ size_t offset; /* offset in this state's bit vector */
+ int bit; /* mask for this state's bit */
+ size_t length; /* length of the bit vector in bytes */
+ char *vector; /* new or enlarged bit vector */
+
+ /* point to vector for (syms,left,len), bit in vector for (mem,rem) */
+ index = INDEX(syms, left, len);
+ mem -= 1 << root;
+ offset = (mem >> 3) + rem;
+ offset = ((offset * (offset + 1)) >> 1) + rem;
+ bit = 1 << (mem & 7);
+
+ /* see if we've been here */
+ length = done[index].len;
+ if (offset < length && (done[index].vec[offset] & bit) != 0)
+ return 1; /* done this! */
+
+ /* we haven't been here before -- set the bit to show we have now */
+
+ /* see if we need to lengthen the vector in order to set the bit */
+ if (length <= offset) {
+ /* if we have one already, enlarge it, zero out the appended space */
+ if (length) {
+ do {
+ length <<= 1;
+ } while (length <= offset);
+ vector = realloc(done[index].vec, length);
+ if (vector != NULL)
+ memset(vector + done[index].len, 0, length - done[index].len);
+ }
+
+ /* otherwise we need to make a new vector and zero it out */
+ else {
+ length = 1 << (len - root);
+ while (length <= offset)
+ length <<= 1;
+ vector = calloc(length, sizeof(char));
+ }
+
+ /* in either case, bail if we can't get the memory */
+ if (vector == NULL) {
+ fputs("abort: unable to allocate enough memory\n", stderr);
+ cleanup();
+ exit(1);
+ }
+
+ /* install the new vector */
+ done[index].len = length;
+ done[index].vec = vector;
+ }
+
+ /* set the bit */
+ done[index].vec[offset] |= bit;
+ return 0;
+}
+
+/* Examine all possible codes from the given node (syms, len, left). Compute
+ the amount of memory required to build inflate's decoding tables, where the
+ number of code structures used so far is mem, and the number remaining in
+ the current sub-table is rem. Uses the globals max, code, root, large, and
+ done. */
+local void examine(int syms, int len, int left, int mem, int rem)
+{
+ int least; /* least number of syms to use at this juncture */
+ int most; /* most number of syms to use at this juncture */
+ int use; /* number of bit patterns to use in next call */
+
+ /* see if we have a complete code */
+ if (syms == left) {
+ /* set the last code entry */
+ code[len] = left;
+
+ /* complete computation of memory used by this code */
+ while (rem < left) {
+ left -= rem;
+ rem = 1 << (len - root);
+ mem += rem;
+ }
+ assert(rem == left);
+
+ /* if this is a new maximum, show the entries used and the sub-code */
+ if (mem > large) {
+ large = mem;
+ printf("max %d: ", mem);
+ for (use = root + 1; use <= max; use++)
+ if (code[use])
+ printf("%d[%d] ", code[use], use);
+ putchar('\n');
+ fflush(stdout);
+ }
+
+ /* remove entries as we drop back down in the recursion */
+ code[len] = 0;
+ return;
+ }
+
+ /* prune the tree if we can */
+ if (beenhere(syms, len, left, mem, rem))
+ return;
+
+ /* we need to use at least this many bit patterns so that the code won't be
+ incomplete at the next length (more bit patterns than symbols) */
+ least = (left << 1) - syms;
+ if (least < 0)
+ least = 0;
+
+ /* we can use at most this many bit patterns, lest there not be enough
+ available for the remaining symbols at the maximum length (if there were
+ no limit to the code length, this would become: most = left - 1) */
+ most = (((code_t)left << (max - len)) - syms) /
+ (((code_t)1 << (max - len)) - 1);
+
+ /* occupy least table spaces, creating new sub-tables as needed */
+ use = least;
+ while (rem < use) {
+ use -= rem;
+ rem = 1 << (len - root);
+ mem += rem;
+ }
+ rem -= use;
+
+ /* examine codes from here, updating table space as we go */
+ for (use = least; use <= most; use++) {
+ code[len] = use;
+ examine(syms - use, len + 1, (left - use) << 1,
+ mem + (rem ? 1 << (len - root) : 0), rem << 1);
+ if (rem == 0) {
+ rem = 1 << (len - root);
+ mem += rem;
+ }
+ rem--;
+ }
+
+ /* remove entries as we drop back down in the recursion */
+ code[len] = 0;
+}
+
+/* Look at all sub-codes starting with root + 1 bits. Look at only the valid
+ intermediate code states (syms, left, len). For each completed code,
+ calculate the amount of memory required by inflate to build the decoding
+ tables. Find the maximum amount of memory required and show the code that
+ requires that maximum. Uses the globals max, root, and num. */
+local void enough(int syms)
+{
+ int n; /* number of remaing symbols for this node */
+ int left; /* number of unused bit patterns at this length */
+ size_t index; /* index of this case in *num */
+
+ /* clear code */
+ for (n = 0; n <= max; n++)
+ code[n] = 0;
+
+ /* look at all (root + 1) bit and longer codes */
+ large = 1 << root; /* base table */
+ if (root < max) /* otherwise, there's only a base table */
+ for (n = 3; n <= syms; n++)
+ for (left = 2; left < n; left += 2)
+ {
+ /* look at all reachable (root + 1) bit nodes, and the
+ resulting codes (complete at root + 2 or more) */
+ index = INDEX(n, left, root + 1);
+ if (root + 1 < max && num[index]) /* reachable node */
+ examine(n, root + 1, left, 1 << root, 0);
+
+ /* also look at root bit codes with completions at root + 1
+ bits (not saved in num, since complete), just in case */
+ if (num[index - 1] && n <= left << 1)
+ examine((n - left) << 1, root + 1, (n - left) << 1,
+ 1 << root, 0);
+ }
+
+ /* done */
+ printf("done: maximum of %d table entries\n", large);
+}
+
+/*
+ Examine and show the total number of possible Huffman codes for a given
+ maximum number of symbols, initial root table size, and maximum code length
+ in bits -- those are the command arguments in that order. The default
+ values are 286, 9, and 15 respectively, for the deflate literal/length code.
+ The possible codes are counted for each number of coded symbols from two to
+ the maximum. The counts for each of those and the total number of codes are
+ shown. The maximum number of inflate table entires is then calculated
+ across all possible codes. Each new maximum number of table entries and the
+ associated sub-code (starting at root + 1 == 10 bits) is shown.
+
+ To count and examine Huffman codes that are not length-limited, provide a
+ maximum length equal to the number of symbols minus one.
+
+ For the deflate literal/length code, use "enough". For the deflate distance
+ code, use "enough 30 6".
+
+ This uses the %llu printf format to print big_t numbers, which assumes that
+ big_t is an unsigned long long. If the big_t type is changed (for example
+ to a multiple precision type), the method of printing will also need to be
+ updated.
+ */
+int main(int argc, char **argv)
+{
+ int syms; /* total number of symbols to code */
+ int n; /* number of symbols to code for this run */
+ big_t got; /* return value of count() */
+ big_t sum; /* accumulated number of codes over n */
+ code_t word; /* for counting bits in code_t */
+
+ /* set up globals for cleanup() */
+ code = NULL;
+ num = NULL;
+ done = NULL;
+
+ /* get arguments -- default to the deflate literal/length code */
+ syms = 286;
+ root = 9;
+ max = 15;
+ if (argc > 1) {
+ syms = atoi(argv[1]);
+ if (argc > 2) {
+ root = atoi(argv[2]);
+ if (argc > 3)
+ max = atoi(argv[3]);
+ }
+ }
+ if (argc > 4 || syms < 2 || root < 1 || max < 1) {
+ fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n",
+ stderr);
+ return 1;
+ }
+
+ /* if not restricting the code length, the longest is syms - 1 */
+ if (max > syms - 1)
+ max = syms - 1;
+
+ /* determine the number of bits in a code_t */
+ for (n = 0, word = 1; word; n++, word <<= 1)
+ ;
+
+ /* make sure that the calculation of most will not overflow */
+ if (max > n || (code_t)(syms - 2) >= (((code_t)0 - 1) >> (max - 1))) {
+ fputs("abort: code length too long for internal types\n", stderr);
+ return 1;
+ }
+
+ /* reject impossible code requests */
+ if ((code_t)(syms - 1) > ((code_t)1 << max) - 1) {
+ fprintf(stderr, "%d symbols cannot be coded in %d bits\n",
+ syms, max);
+ return 1;
+ }
+
+ /* allocate code vector */
+ code = calloc(max + 1, sizeof(int));
+ if (code == NULL) {
+ fputs("abort: unable to allocate enough memory\n", stderr);
+ return 1;
+ }
+
+ /* determine size of saved results array, checking for overflows,
+ allocate and clear the array (set all to zero with calloc()) */
+ if (syms == 2) /* iff max == 1 */
+ num = NULL; /* won't be saving any results */
+ else {
+ size = syms >> 1;
+ if (size > ((size_t)0 - 1) / (n = (syms - 1) >> 1) ||
+ (size *= n, size > ((size_t)0 - 1) / (n = max - 1)) ||
+ (size *= n, size > ((size_t)0 - 1) / sizeof(big_t)) ||
+ (num = calloc(size, sizeof(big_t))) == NULL) {
+ fputs("abort: unable to allocate enough memory\n", stderr);
+ cleanup();
+ return 1;
+ }
+ }
+
+ /* count possible codes for all numbers of symbols, add up counts */
+ sum = 0;
+ for (n = 2; n <= syms; n++) {
+ got = count(n, 1, 2);
+ sum += got;
+ if (got == (big_t)0 - 1 || sum < got) { /* overflow */
+ fputs("abort: can't count that high!\n", stderr);
+ cleanup();
+ return 1;
+ }
+ printf("%llu %d-codes\n", got, n);
+ }
+ printf("%llu total codes for 2 to %d symbols", sum, syms);
+ if (max < syms - 1)
+ printf(" (%d-bit length limit)\n", max);
+ else
+ puts(" (no length limit)");
+
+ /* allocate and clear done array for beenhere() */
+ if (syms == 2)
+ done = NULL;
+ else if (size > ((size_t)0 - 1) / sizeof(struct tab) ||
+ (done = calloc(size, sizeof(struct tab))) == NULL) {
+ fputs("abort: unable to allocate enough memory\n", stderr);
+ cleanup();
+ return 1;
+ }
+
+ /* find and show maximum inflate table usage */
+ if (root > max) /* reduce root to max length */
+ root = max;
+ if ((code_t)syms < ((code_t)1 << (root + 1)))
+ enough(syms);
+ else
+ puts("cannot handle minimum code lengths > root");
+
+ /* done */
+ cleanup();
+ return 0;
+}
--- /dev/null
+/* fitblk.c: example of fitting compressed output to a specified size
+ Not copyrighted -- provided to the public domain
+ Version 1.1 25 November 2004 Mark Adler */
+
+/* Version history:
+ 1.0 24 Nov 2004 First version
+ 1.1 25 Nov 2004 Change deflateInit2() to deflateInit()
+ Use fixed-size, stack-allocated raw buffers
+ Simplify code moving compression to subroutines
+ Use assert() for internal errors
+ Add detailed description of approach
+ */
+
+/* Approach to just fitting a requested compressed size:
+
+ fitblk performs three compression passes on a portion of the input
+ data in order to determine how much of that input will compress to
+ nearly the requested output block size. The first pass generates
+ enough deflate blocks to produce output to fill the requested
+ output size plus a specfied excess amount (see the EXCESS define
+ below). The last deflate block may go quite a bit past that, but
+ is discarded. The second pass decompresses and recompresses just
+ the compressed data that fit in the requested plus excess sized
+ buffer. The deflate process is terminated after that amount of
+ input, which is less than the amount consumed on the first pass.
+ The last deflate block of the result will be of a comparable size
+ to the final product, so that the header for that deflate block and
+ the compression ratio for that block will be about the same as in
+ the final product. The third compression pass decompresses the
+ result of the second step, but only the compressed data up to the
+ requested size minus an amount to allow the compressed stream to
+ complete (see the MARGIN define below). That will result in a
+ final compressed stream whose length is less than or equal to the
+ requested size. Assuming sufficient input and a requested size
+ greater than a few hundred bytes, the shortfall will typically be
+ less than ten bytes.
+
+ If the input is short enough that the first compression completes
+ before filling the requested output size, then that compressed
+ stream is return with no recompression.
+
+ EXCESS is chosen to be just greater than the shortfall seen in a
+ two pass approach similar to the above. That shortfall is due to
+ the last deflate block compressing more efficiently with a smaller
+ header on the second pass. EXCESS is set to be large enough so
+ that there is enough uncompressed data for the second pass to fill
+ out the requested size, and small enough so that the final deflate
+ block of the second pass will be close in size to the final deflate
+ block of the third and final pass. MARGIN is chosen to be just
+ large enough to assure that the final compression has enough room
+ to complete in all cases.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include "zlib.h"
+
+#define local static
+
+/* print nastygram and leave */
+local void quit(char *why)
+{
+ fprintf(stderr, "fitblk abort: %s\n", why);
+ exit(1);
+}
+
+#define RAWLEN 4096 /* intermediate uncompressed buffer size */
+
+/* compress from file to def until provided buffer is full or end of
+ input reached; return last deflate() return value, or Z_ERRNO if
+ there was read error on the file */
+local int partcompress(FILE *in, z_streamp def)
+{
+ int ret, flush;
+ unsigned char raw[RAWLEN];
+
+ flush = Z_NO_FLUSH;
+ do {
+ def->avail_in = fread(raw, 1, RAWLEN, in);
+ if (ferror(in))
+ return Z_ERRNO;
+ def->next_in = raw;
+ if (feof(in))
+ flush = Z_FINISH;
+ ret = deflate(def, flush);
+ assert(ret != Z_STREAM_ERROR);
+ } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
+ return ret;
+}
+
+/* recompress from inf's input to def's output; the input for inf and
+ the output for def are set in those structures before calling;
+ return last deflate() return value, or Z_MEM_ERROR if inflate()
+ was not able to allocate enough memory when it needed to */
+local int recompress(z_streamp inf, z_streamp def)
+{
+ int ret, flush;
+ unsigned char raw[RAWLEN];
+
+ flush = Z_NO_FLUSH;
+ do {
+ /* decompress */
+ inf->avail_out = RAWLEN;
+ inf->next_out = raw;
+ ret = inflate(inf, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
+ ret != Z_NEED_DICT);
+ if (ret == Z_MEM_ERROR)
+ return ret;
+
+ /* compress what was decompresed until done or no room */
+ def->avail_in = RAWLEN - inf->avail_out;
+ def->next_in = raw;
+ if (inf->avail_out != 0)
+ flush = Z_FINISH;
+ ret = deflate(def, flush);
+ assert(ret != Z_STREAM_ERROR);
+ } while (ret != Z_STREAM_END && def->avail_out != 0);
+ return ret;
+}
+
+#define EXCESS 256 /* empirically determined stream overage */
+#define MARGIN 8 /* amount to back off for completion */
+
+/* compress from stdin to fixed-size block on stdout */
+int main(int argc, char **argv)
+{
+ int ret; /* return code */
+ unsigned size; /* requested fixed output block size */
+ unsigned have; /* bytes written by deflate() call */
+ unsigned char *blk; /* intermediate and final stream */
+ unsigned char *tmp; /* close to desired size stream */
+ z_stream def, inf; /* zlib deflate and inflate states */
+
+ /* get requested output size */
+ if (argc != 2)
+ quit("need one argument: size of output block");
+ ret = strtol(argv[1], argv + 1, 10);
+ if (argv[1][0] != 0)
+ quit("argument must be a number");
+ if (ret < 8) /* 8 is minimum zlib stream size */
+ quit("need positive size of 8 or greater");
+ size = (unsigned)ret;
+
+ /* allocate memory for buffers and compression engine */
+ blk = malloc(size + EXCESS);
+ def.zalloc = Z_NULL;
+ def.zfree = Z_NULL;
+ def.opaque = Z_NULL;
+ ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK || blk == NULL)
+ quit("out of memory");
+
+ /* compress from stdin until output full, or no more input */
+ def.avail_out = size + EXCESS;
+ def.next_out = blk;
+ ret = partcompress(stdin, &def);
+ if (ret == Z_ERRNO)
+ quit("error reading input");
+
+ /* if it all fit, then size was undersubscribed -- done! */
+ if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
+ /* write block to stdout */
+ have = size + EXCESS - def.avail_out;
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
+ quit("error writing output");
+
+ /* clean up and print results to stderr */
+ ret = deflateEnd(&def);
+ assert(ret != Z_STREAM_ERROR);
+ free(blk);
+ fprintf(stderr,
+ "%u bytes unused out of %u requested (all input)\n",
+ size - have, size);
+ return 0;
+ }
+
+ /* it didn't all fit -- set up for recompression */
+ inf.zalloc = Z_NULL;
+ inf.zfree = Z_NULL;
+ inf.opaque = Z_NULL;
+ inf.avail_in = 0;
+ inf.next_in = Z_NULL;
+ ret = inflateInit(&inf);
+ tmp = malloc(size + EXCESS);
+ if (ret != Z_OK || tmp == NULL)
+ quit("out of memory");
+ ret = deflateReset(&def);
+ assert(ret != Z_STREAM_ERROR);
+
+ /* do first recompression close to the right amount */
+ inf.avail_in = size + EXCESS;
+ inf.next_in = blk;
+ def.avail_out = size + EXCESS;
+ def.next_out = tmp;
+ ret = recompress(&inf, &def);
+ if (ret == Z_MEM_ERROR)
+ quit("out of memory");
+
+ /* set up for next reocmpression */
+ ret = inflateReset(&inf);
+ assert(ret != Z_STREAM_ERROR);
+ ret = deflateReset(&def);
+ assert(ret != Z_STREAM_ERROR);
+
+ /* do second and final recompression (third compression) */
+ inf.avail_in = size - MARGIN; /* assure stream will complete */
+ inf.next_in = tmp;
+ def.avail_out = size;
+ def.next_out = blk;
+ ret = recompress(&inf, &def);
+ if (ret == Z_MEM_ERROR)
+ quit("out of memory");
+ assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */
+
+ /* done -- write block to stdout */
+ have = size - def.avail_out;
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
+ quit("error writing output");
+
+ /* clean up and print results to stderr */
+ free(tmp);
+ ret = inflateEnd(&inf);
+ assert(ret != Z_STREAM_ERROR);
+ ret = deflateEnd(&def);
+ assert(ret != Z_STREAM_ERROR);
+ free(blk);
+ fprintf(stderr,
+ "%u bytes unused out of %u requested (%lu input)\n",
+ size - have, size, def.total_in);
+ return 0;
+}
--- /dev/null
+/* gun.c -- simple gunzip to give an example of the use of inflateBack()
+ * Copyright (C) 2003, 2005, 2008, 2010, 2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ Version 1.7 12 August 2012 Mark Adler */
+
+/* Version history:
+ 1.0 16 Feb 2003 First version for testing of inflateBack()
+ 1.1 21 Feb 2005 Decompress concatenated gzip streams
+ Remove use of "this" variable (C++ keyword)
+ Fix return value for in()
+ Improve allocation failure checking
+ Add typecasting for void * structures
+ Add -h option for command version and usage
+ Add a bunch of comments
+ 1.2 20 Mar 2005 Add Unix compress (LZW) decompression
+ Copy file attributes from input file to output file
+ 1.3 12 Jun 2005 Add casts for error messages [Oberhumer]
+ 1.4 8 Dec 2006 LZW decompression speed improvements
+ 1.5 9 Feb 2008 Avoid warning in latest version of gcc
+ 1.6 17 Jan 2010 Avoid signed/unsigned comparison warnings
+ 1.7 12 Aug 2012 Update for z_const usage in zlib 1.2.8
+ */
+
+/*
+ gun [ -t ] [ name ... ]
+
+ decompresses the data in the named gzip files. If no arguments are given,
+ gun will decompress from stdin to stdout. The names must end in .gz, -gz,
+ .z, -z, _z, or .Z. The uncompressed data will be written to a file name
+ with the suffix stripped. On success, the original file is deleted. On
+ failure, the output file is deleted. For most failures, the command will
+ continue to process the remaining names on the command line. A memory
+ allocation failure will abort the command. If -t is specified, then the
+ listed files or stdin will be tested as gzip files for integrity (without
+ checking for a proper suffix), no output will be written, and no files
+ will be deleted.
+
+ Like gzip, gun allows concatenated gzip streams and will decompress them,
+ writing all of the uncompressed data to the output. Unlike gzip, gun allows
+ an empty file on input, and will produce no error writing an empty output
+ file.
+
+ gun will also decompress files made by Unix compress, which uses LZW
+ compression. These files are automatically detected by virtue of their
+ magic header bytes. Since the end of Unix compress stream is marked by the
+ end-of-file, they cannot be concantenated. If a Unix compress stream is
+ encountered in an input file, it is the last stream in that file.
+
+ Like gunzip and uncompress, the file attributes of the orignal compressed
+ file are maintained in the final uncompressed file, to the extent that the
+ user permissions allow it.
+
+ On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version
+ 1.2.4) is on the same file, when gun is linked with zlib 1.2.2. Also the
+ LZW decompression provided by gun is about twice as fast as the standard
+ Unix uncompress command.
+ */
+
+/* external functions and related types and constants */
+#include <stdio.h> /* fprintf() */
+#include <stdlib.h> /* malloc(), free() */
+#include <string.h> /* strerror(), strcmp(), strlen(), memcpy() */
+#include <errno.h> /* errno */
+#include <fcntl.h> /* open() */
+#include <unistd.h> /* read(), write(), close(), chown(), unlink() */
+#include <sys/types.h>
+#include <sys/stat.h> /* stat(), chmod() */
+#include <utime.h> /* utime() */
+#include "zlib.h" /* inflateBackInit(), inflateBack(), */
+ /* inflateBackEnd(), crc32() */
+
+/* function declaration */
+#define local static
+
+/* buffer constants */
+#define SIZE 32768U /* input and output buffer sizes */
+#define PIECE 16384 /* limits i/o chunks for 16-bit int case */
+
+/* structure for infback() to pass to input function in() -- it maintains the
+ input file and a buffer of size SIZE */
+struct ind {
+ int infile;
+ unsigned char *inbuf;
+};
+
+/* Load input buffer, assumed to be empty, and return bytes loaded and a
+ pointer to them. read() is called until the buffer is full, or until it
+ returns end-of-file or error. Return 0 on error. */
+local unsigned in(void *in_desc, z_const unsigned char **buf)
+{
+ int ret;
+ unsigned len;
+ unsigned char *next;
+ struct ind *me = (struct ind *)in_desc;
+
+ next = me->inbuf;
+ *buf = next;
+ len = 0;
+ do {
+ ret = PIECE;
+ if ((unsigned)ret > SIZE - len)
+ ret = (int)(SIZE - len);
+ ret = (int)read(me->infile, next, ret);
+ if (ret == -1) {
+ len = 0;
+ break;
+ }
+ next += ret;
+ len += ret;
+ } while (ret != 0 && len < SIZE);
+ return len;
+}
+
+/* structure for infback() to pass to output function out() -- it maintains the
+ output file, a running CRC-32 check on the output and the total number of
+ bytes output, both for checking against the gzip trailer. (The length in
+ the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and
+ the output is greater than 4 GB.) */
+struct outd {
+ int outfile;
+ int check; /* true if checking crc and total */
+ unsigned long crc;
+ unsigned long total;
+};
+
+/* Write output buffer and update the CRC-32 and total bytes written. write()
+ is called until all of the output is written or an error is encountered.
+ On success out() returns 0. For a write failure, out() returns 1. If the
+ output file descriptor is -1, then nothing is written.
+ */
+local int out(void *out_desc, unsigned char *buf, unsigned len)
+{
+ int ret;
+ struct outd *me = (struct outd *)out_desc;
+
+ if (me->check) {
+ me->crc = crc32(me->crc, buf, len);
+ me->total += len;
+ }
+ if (me->outfile != -1)
+ do {
+ ret = PIECE;
+ if ((unsigned)ret > len)
+ ret = (int)len;
+ ret = (int)write(me->outfile, buf, ret);
+ if (ret == -1)
+ return 1;
+ buf += ret;
+ len -= ret;
+ } while (len != 0);
+ return 0;
+}
+
+/* next input byte macro for use inside lunpipe() and gunpipe() */
+#define NEXT() (have ? 0 : (have = in(indp, &next)), \
+ last = have ? (have--, (int)(*next++)) : -1)
+
+/* memory for gunpipe() and lunpipe() --
+ the first 256 entries of prefix[] and suffix[] are never used, could
+ have offset the index, but it's faster to waste the memory */
+unsigned char inbuf[SIZE]; /* input buffer */
+unsigned char outbuf[SIZE]; /* output buffer */
+unsigned short prefix[65536]; /* index to LZW prefix string */
+unsigned char suffix[65536]; /* one-character LZW suffix */
+unsigned char match[65280 + 2]; /* buffer for reversed match or gzip
+ 32K sliding window */
+
+/* throw out what's left in the current bits byte buffer (this is a vestigial
+ aspect of the compressed data format derived from an implementation that
+ made use of a special VAX machine instruction!) */
+#define FLUSHCODE() \
+ do { \
+ left = 0; \
+ rem = 0; \
+ if (chunk > have) { \
+ chunk -= have; \
+ have = 0; \
+ if (NEXT() == -1) \
+ break; \
+ chunk--; \
+ if (chunk > have) { \
+ chunk = have = 0; \
+ break; \
+ } \
+ } \
+ have -= chunk; \
+ next += chunk; \
+ chunk = 0; \
+ } while (0)
+
+/* Decompress a compress (LZW) file from indp to outfile. The compress magic
+ header (two bytes) has already been read and verified. There are have bytes
+ of buffered input at next. strm is used for passing error information back
+ to gunpipe().
+
+ lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of
+ file, read error, or write error (a write error indicated by strm->next_in
+ not equal to Z_NULL), or Z_DATA_ERROR for invalid input.
+ */
+local int lunpipe(unsigned have, z_const unsigned char *next, struct ind *indp,
+ int outfile, z_stream *strm)
+{
+ int last; /* last byte read by NEXT(), or -1 if EOF */
+ unsigned chunk; /* bytes left in current chunk */
+ int left; /* bits left in rem */
+ unsigned rem; /* unused bits from input */
+ int bits; /* current bits per code */
+ unsigned code; /* code, table traversal index */
+ unsigned mask; /* mask for current bits codes */
+ int max; /* maximum bits per code for this stream */
+ unsigned flags; /* compress flags, then block compress flag */
+ unsigned end; /* last valid entry in prefix/suffix tables */
+ unsigned temp; /* current code */
+ unsigned prev; /* previous code */
+ unsigned final; /* last character written for previous code */
+ unsigned stack; /* next position for reversed string */
+ unsigned outcnt; /* bytes in output buffer */
+ struct outd outd; /* output structure */
+ unsigned char *p;
+
+ /* set up output */
+ outd.outfile = outfile;
+ outd.check = 0;
+
+ /* process remainder of compress header -- a flags byte */
+ flags = NEXT();
+ if (last == -1)
+ return Z_BUF_ERROR;
+ if (flags & 0x60) {
+ strm->msg = (char *)"unknown lzw flags set";
+ return Z_DATA_ERROR;
+ }
+ max = flags & 0x1f;
+ if (max < 9 || max > 16) {
+ strm->msg = (char *)"lzw bits out of range";
+ return Z_DATA_ERROR;
+ }
+ if (max == 9) /* 9 doesn't really mean 9 */
+ max = 10;
+ flags &= 0x80; /* true if block compress */
+
+ /* clear table */
+ bits = 9;
+ mask = 0x1ff;
+ end = flags ? 256 : 255;
+
+ /* set up: get first 9-bit code, which is the first decompressed byte, but
+ don't create a table entry until the next code */
+ if (NEXT() == -1) /* no compressed data is ok */
+ return Z_OK;
+ final = prev = (unsigned)last; /* low 8 bits of code */
+ if (NEXT() == -1) /* missing a bit */
+ return Z_BUF_ERROR;
+ if (last & 1) { /* code must be < 256 */
+ strm->msg = (char *)"invalid lzw code";
+ return Z_DATA_ERROR;
+ }
+ rem = (unsigned)last >> 1; /* remaining 7 bits */
+ left = 7;
+ chunk = bits - 2; /* 7 bytes left in this chunk */
+ outbuf[0] = (unsigned char)final; /* write first decompressed byte */
+ outcnt = 1;
+
+ /* decode codes */
+ stack = 0;
+ for (;;) {
+ /* if the table will be full after this, increment the code size */
+ if (end >= mask && bits < max) {
+ FLUSHCODE();
+ bits++;
+ mask <<= 1;
+ mask++;
+ }
+
+ /* get a code of length bits */
+ if (chunk == 0) /* decrement chunk modulo bits */
+ chunk = bits;
+ code = rem; /* low bits of code */
+ if (NEXT() == -1) { /* EOF is end of compressed data */
+ /* write remaining buffered output */
+ if (outcnt && out(&outd, outbuf, outcnt)) {
+ strm->next_in = outbuf; /* signal write error */
+ return Z_BUF_ERROR;
+ }
+ return Z_OK;
+ }
+ code += (unsigned)last << left; /* middle (or high) bits of code */
+ left += 8;
+ chunk--;
+ if (bits > left) { /* need more bits */
+ if (NEXT() == -1) /* can't end in middle of code */
+ return Z_BUF_ERROR;
+ code += (unsigned)last << left; /* high bits of code */
+ left += 8;
+ chunk--;
+ }
+ code &= mask; /* mask to current code length */
+ left -= bits; /* number of unused bits */
+ rem = (unsigned)last >> (8 - left); /* unused bits from last byte */
+
+ /* process clear code (256) */
+ if (code == 256 && flags) {
+ FLUSHCODE();
+ bits = 9; /* initialize bits and mask */
+ mask = 0x1ff;
+ end = 255; /* empty table */
+ continue; /* get next code */
+ }
+
+ /* special code to reuse last match */
+ temp = code; /* save the current code */
+ if (code > end) {
+ /* Be picky on the allowed code here, and make sure that the code
+ we drop through (prev) will be a valid index so that random
+ input does not cause an exception. The code != end + 1 check is
+ empirically derived, and not checked in the original uncompress
+ code. If this ever causes a problem, that check could be safely
+ removed. Leaving this check in greatly improves gun's ability
+ to detect random or corrupted input after a compress header.
+ In any case, the prev > end check must be retained. */
+ if (code != end + 1 || prev > end) {
+ strm->msg = (char *)"invalid lzw code";
+ return Z_DATA_ERROR;
+ }
+ match[stack++] = (unsigned char)final;
+ code = prev;
+ }
+
+ /* walk through linked list to generate output in reverse order */
+ p = match + stack;
+ while (code >= 256) {
+ *p++ = suffix[code];
+ code = prefix[code];
+ }
+ stack = p - match;
+ match[stack++] = (unsigned char)code;
+ final = code;
+
+ /* link new table entry */
+ if (end < mask) {
+ end++;
+ prefix[end] = (unsigned short)prev;
+ suffix[end] = (unsigned char)final;
+ }
+
+ /* set previous code for next iteration */
+ prev = temp;
+
+ /* write output in forward order */
+ while (stack > SIZE - outcnt) {
+ while (outcnt < SIZE)
+ outbuf[outcnt++] = match[--stack];
+ if (out(&outd, outbuf, outcnt)) {
+ strm->next_in = outbuf; /* signal write error */
+ return Z_BUF_ERROR;
+ }
+ outcnt = 0;
+ }
+ p = match + stack;
+ do {
+ outbuf[outcnt++] = *--p;
+ } while (p > match);
+ stack = 0;
+
+ /* loop for next code with final and prev as the last match, rem and
+ left provide the first 0..7 bits of the next code, end is the last
+ valid table entry */
+ }
+}
+
+/* Decompress a gzip file from infile to outfile. strm is assumed to have been
+ successfully initialized with inflateBackInit(). The input file may consist
+ of a series of gzip streams, in which case all of them will be decompressed
+ to the output file. If outfile is -1, then the gzip stream(s) integrity is
+ checked and nothing is written.
+
+ The return value is a zlib error code: Z_MEM_ERROR if out of memory,
+ Z_DATA_ERROR if the header or the compressed data is invalid, or if the
+ trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends
+ prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip
+ stream) follows a valid gzip stream.
+ */
+local int gunpipe(z_stream *strm, int infile, int outfile)
+{
+ int ret, first, last;
+ unsigned have, flags, len;
+ z_const unsigned char *next = NULL;
+ struct ind ind, *indp;
+ struct outd outd;
+
+ /* setup input buffer */
+ ind.infile = infile;
+ ind.inbuf = inbuf;
+ indp = &ind;
+
+ /* decompress concatenated gzip streams */
+ have = 0; /* no input data read in yet */
+ first = 1; /* looking for first gzip header */
+ strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */
+ for (;;) {
+ /* look for the two magic header bytes for a gzip stream */
+ if (NEXT() == -1) {
+ ret = Z_OK;
+ break; /* empty gzip stream is ok */
+ }
+ if (last != 31 || (NEXT() != 139 && last != 157)) {
+ strm->msg = (char *)"incorrect header check";
+ ret = first ? Z_DATA_ERROR : Z_ERRNO;
+ break; /* not a gzip or compress header */
+ }
+ first = 0; /* next non-header is junk */
+
+ /* process a compress (LZW) file -- can't be concatenated after this */
+ if (last == 157) {
+ ret = lunpipe(have, next, indp, outfile, strm);
+ break;
+ }
+
+ /* process remainder of gzip header */
+ ret = Z_BUF_ERROR;
+ if (NEXT() != 8) { /* only deflate method allowed */
+ if (last == -1) break;
+ strm->msg = (char *)"unknown compression method";
+ ret = Z_DATA_ERROR;
+ break;
+ }
+ flags = NEXT(); /* header flags */
+ NEXT(); /* discard mod time, xflgs, os */
+ NEXT();
+ NEXT();
+ NEXT();
+ NEXT();
+ NEXT();
+ if (last == -1) break;
+ if (flags & 0xe0) {
+ strm->msg = (char *)"unknown header flags set";
+ ret = Z_DATA_ERROR;
+ break;
+ }
+ if (flags & 4) { /* extra field */
+ len = NEXT();
+ len += (unsigned)(NEXT()) << 8;
+ if (last == -1) break;
+ while (len > have) {
+ len -= have;
+ have = 0;
+ if (NEXT() == -1) break;
+ len--;
+ }
+ if (last == -1) break;
+ have -= len;
+ next += len;
+ }
+ if (flags & 8) /* file name */
+ while (NEXT() != 0 && last != -1)
+ ;
+ if (flags & 16) /* comment */
+ while (NEXT() != 0 && last != -1)
+ ;
+ if (flags & 2) { /* header crc */
+ NEXT();
+ NEXT();
+ }
+ if (last == -1) break;
+
+ /* set up output */
+ outd.outfile = outfile;
+ outd.check = 1;
+ outd.crc = crc32(0L, Z_NULL, 0);
+ outd.total = 0;
+
+ /* decompress data to output */
+ strm->next_in = next;
+ strm->avail_in = have;
+ ret = inflateBack(strm, in, indp, out, &outd);
+ if (ret != Z_STREAM_END) break;
+ next = strm->next_in;
+ have = strm->avail_in;
+ strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */
+
+ /* check trailer */
+ ret = Z_BUF_ERROR;
+ if (NEXT() != (int)(outd.crc & 0xff) ||
+ NEXT() != (int)((outd.crc >> 8) & 0xff) ||
+ NEXT() != (int)((outd.crc >> 16) & 0xff) ||
+ NEXT() != (int)((outd.crc >> 24) & 0xff)) {
+ /* crc error */
+ if (last != -1) {
+ strm->msg = (char *)"incorrect data check";
+ ret = Z_DATA_ERROR;
+ }
+ break;
+ }
+ if (NEXT() != (int)(outd.total & 0xff) ||
+ NEXT() != (int)((outd.total >> 8) & 0xff) ||
+ NEXT() != (int)((outd.total >> 16) & 0xff) ||
+ NEXT() != (int)((outd.total >> 24) & 0xff)) {
+ /* length error */
+ if (last != -1) {
+ strm->msg = (char *)"incorrect length check";
+ ret = Z_DATA_ERROR;
+ }
+ break;
+ }
+
+ /* go back and look for another gzip stream */
+ }
+
+ /* clean up and return */
+ return ret;
+}
+
+/* Copy file attributes, from -> to, as best we can. This is best effort, so
+ no errors are reported. The mode bits, including suid, sgid, and the sticky
+ bit are copied (if allowed), the owner's user id and group id are copied
+ (again if allowed), and the access and modify times are copied. */
+local void copymeta(char *from, char *to)
+{
+ struct stat was;
+ struct utimbuf when;
+
+ /* get all of from's Unix meta data, return if not a regular file */
+ if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG)
+ return;
+
+ /* set to's mode bits, ignore errors */
+ (void)chmod(to, was.st_mode & 07777);
+
+ /* copy owner's user and group, ignore errors */
+ (void)chown(to, was.st_uid, was.st_gid);
+
+ /* copy access and modify times, ignore errors */
+ when.actime = was.st_atime;
+ when.modtime = was.st_mtime;
+ (void)utime(to, &when);
+}
+
+/* Decompress the file inname to the file outnname, of if test is true, just
+ decompress without writing and check the gzip trailer for integrity. If
+ inname is NULL or an empty string, read from stdin. If outname is NULL or
+ an empty string, write to stdout. strm is a pre-initialized inflateBack
+ structure. When appropriate, copy the file attributes from inname to
+ outname.
+
+ gunzip() returns 1 if there is an out-of-memory error or an unexpected
+ return code from gunpipe(). Otherwise it returns 0.
+ */
+local int gunzip(z_stream *strm, char *inname, char *outname, int test)
+{
+ int ret;
+ int infile, outfile;
+
+ /* open files */
+ if (inname == NULL || *inname == 0) {
+ inname = "-";
+ infile = 0; /* stdin */
+ }
+ else {
+ infile = open(inname, O_RDONLY, 0);
+ if (infile == -1) {
+ fprintf(stderr, "gun cannot open %s\n", inname);
+ return 0;
+ }
+ }
+ if (test)
+ outfile = -1;
+ else if (outname == NULL || *outname == 0) {
+ outname = "-";
+ outfile = 1; /* stdout */
+ }
+ else {
+ outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666);
+ if (outfile == -1) {
+ close(infile);
+ fprintf(stderr, "gun cannot create %s\n", outname);
+ return 0;
+ }
+ }
+ errno = 0;
+
+ /* decompress */
+ ret = gunpipe(strm, infile, outfile);
+ if (outfile > 2) close(outfile);
+ if (infile > 2) close(infile);
+
+ /* interpret result */
+ switch (ret) {
+ case Z_OK:
+ case Z_ERRNO:
+ if (infile > 2 && outfile > 2) {
+ copymeta(inname, outname); /* copy attributes */
+ unlink(inname);
+ }
+ if (ret == Z_ERRNO)
+ fprintf(stderr, "gun warning: trailing garbage ignored in %s\n",
+ inname);
+ break;
+ case Z_DATA_ERROR:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg);
+ break;
+ case Z_MEM_ERROR:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ return 1;
+ case Z_BUF_ERROR:
+ if (outfile > 2) unlink(outname);
+ if (strm->next_in != Z_NULL) {
+ fprintf(stderr, "gun write error on %s: %s\n",
+ outname, strerror(errno));
+ }
+ else if (errno) {
+ fprintf(stderr, "gun read error on %s: %s\n",
+ inname, strerror(errno));
+ }
+ else {
+ fprintf(stderr, "gun unexpected end of file on %s\n",
+ inname);
+ }
+ break;
+ default:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun internal error--aborting\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* Process the gun command line arguments. See the command syntax near the
+ beginning of this source file. */
+int main(int argc, char **argv)
+{
+ int ret, len, test;
+ char *outname;
+ unsigned char *window;
+ z_stream strm;
+
+ /* initialize inflateBack state for repeated use */
+ window = match; /* reuse LZW match buffer */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = inflateBackInit(&strm, 15, window);
+ if (ret != Z_OK) {
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ return 1;
+ }
+
+ /* decompress each file to the same name with the suffix removed */
+ argc--;
+ argv++;
+ test = 0;
+ if (argc && strcmp(*argv, "-h") == 0) {
+ fprintf(stderr, "gun 1.6 (17 Jan 2010)\n");
+ fprintf(stderr, "Copyright (C) 2003-2010 Mark Adler\n");
+ fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
+ return 0;
+ }
+ if (argc && strcmp(*argv, "-t") == 0) {
+ test = 1;
+ argc--;
+ argv++;
+ }
+ if (argc)
+ do {
+ if (test)
+ outname = NULL;
+ else {
+ len = (int)strlen(*argv);
+ if (strcmp(*argv + len - 3, ".gz") == 0 ||
+ strcmp(*argv + len - 3, "-gz") == 0)
+ len -= 3;
+ else if (strcmp(*argv + len - 2, ".z") == 0 ||
+ strcmp(*argv + len - 2, "-z") == 0 ||
+ strcmp(*argv + len - 2, "_z") == 0 ||
+ strcmp(*argv + len - 2, ".Z") == 0)
+ len -= 2;
+ else {
+ fprintf(stderr, "gun error: no gz type on %s--skipping\n",
+ *argv);
+ continue;
+ }
+ outname = malloc(len + 1);
+ if (outname == NULL) {
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ ret = 1;
+ break;
+ }
+ memcpy(outname, *argv, len);
+ outname[len] = 0;
+ }
+ ret = gunzip(&strm, *argv, outname, test);
+ if (outname != NULL) free(outname);
+ if (ret) break;
+ } while (argv++, --argc);
+ else
+ ret = gunzip(&strm, NULL, NULL, test);
+
+ /* clean up */
+ inflateBackEnd(&strm);
+ return ret;
+}
--- /dev/null
+/* gzappend -- command to append to a gzip file
+
+ Copyright (C) 2003, 2012 Mark Adler, all rights reserved
+ version 1.2, 11 Oct 2012
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler@alumni.caltech.edu
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 19 Oct 2003 - First version
+ * 1.1 4 Nov 2003 - Expand and clarify some comments and notes
+ * - Add version and copyright to help
+ * - Send help to stdout instead of stderr
+ * - Add some preemptive typecasts
+ * - Add L to constants in lseek() calls
+ * - Remove some debugging information in error messages
+ * - Use new data_type definition for zlib 1.2.1
+ * - Simplfy and unify file operations
+ * - Finish off gzip file in gztack()
+ * - Use deflatePrime() instead of adding empty blocks
+ * - Keep gzip file clean on appended file read errors
+ * - Use in-place rotate instead of auxiliary buffer
+ * (Why you ask? Because it was fun to write!)
+ * 1.2 11 Oct 2012 - Fix for proper z_const usage
+ * - Check for input buffer malloc failure
+ */
+
+/*
+ gzappend takes a gzip file and appends to it, compressing files from the
+ command line or data from stdin. The gzip file is written to directly, to
+ avoid copying that file, in case it's large. Note that this results in the
+ unfriendly behavior that if gzappend fails, the gzip file is corrupted.
+
+ This program was written to illustrate the use of the new Z_BLOCK option of
+ zlib 1.2.x's inflate() function. This option returns from inflate() at each
+ block boundary to facilitate locating and modifying the last block bit at
+ the start of the final deflate block. Also whether using Z_BLOCK or not,
+ another required feature of zlib 1.2.x is that inflate() now provides the
+ number of unusued bits in the last input byte used. gzappend will not work
+ with versions of zlib earlier than 1.2.1.
+
+ gzappend first decompresses the gzip file internally, discarding all but
+ the last 32K of uncompressed data, and noting the location of the last block
+ bit and the number of unused bits in the last byte of the compressed data.
+ The gzip trailer containing the CRC-32 and length of the uncompressed data
+ is verified. This trailer will be later overwritten.
+
+ Then the last block bit is cleared by seeking back in the file and rewriting
+ the byte that contains it. Seeking forward, the last byte of the compressed
+ data is saved along with the number of unused bits to initialize deflate.
+
+ A deflate process is initialized, using the last 32K of the uncompressed
+ data from the gzip file to initialize the dictionary. If the total
+ uncompressed data was less than 32K, then all of it is used to initialize
+ the dictionary. The deflate output bit buffer is also initialized with the
+ last bits from the original deflate stream. From here on, the data to
+ append is simply compressed using deflate, and written to the gzip file.
+ When that is complete, the new CRC-32 and uncompressed length are written
+ as the trailer of the gzip file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include "zlib.h"
+
+#define local static
+#define LGCHUNK 14
+#define CHUNK (1U << LGCHUNK)
+#define DSIZE 32768U
+
+/* print an error message and terminate with extreme prejudice */
+local void bye(char *msg1, char *msg2)
+{
+ fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2);
+ exit(1);
+}
+
+/* return the greatest common divisor of a and b using Euclid's algorithm,
+ modified to be fast when one argument much greater than the other, and
+ coded to avoid unnecessary swapping */
+local unsigned gcd(unsigned a, unsigned b)
+{
+ unsigned c;
+
+ while (a && b)
+ if (a > b) {
+ c = b;
+ while (a - c >= c)
+ c <<= 1;
+ a -= c;
+ }
+ else {
+ c = a;
+ while (b - c >= c)
+ c <<= 1;
+ b -= c;
+ }
+ return a + b;
+}
+
+/* rotate list[0..len-1] left by rot positions, in place */
+local void rotate(unsigned char *list, unsigned len, unsigned rot)
+{
+ unsigned char tmp;
+ unsigned cycles;
+ unsigned char *start, *last, *to, *from;
+
+ /* normalize rot and handle degenerate cases */
+ if (len < 2) return;
+ if (rot >= len) rot %= len;
+ if (rot == 0) return;
+
+ /* pointer to last entry in list */
+ last = list + (len - 1);
+
+ /* do simple left shift by one */
+ if (rot == 1) {
+ tmp = *list;
+ memcpy(list, list + 1, len - 1);
+ *last = tmp;
+ return;
+ }
+
+ /* do simple right shift by one */
+ if (rot == len - 1) {
+ tmp = *last;
+ memmove(list + 1, list, len - 1);
+ *list = tmp;
+ return;
+ }
+
+ /* otherwise do rotate as a set of cycles in place */
+ cycles = gcd(len, rot); /* number of cycles */
+ do {
+ start = from = list + cycles; /* start index is arbitrary */
+ tmp = *from; /* save entry to be overwritten */
+ for (;;) {
+ to = from; /* next step in cycle */
+ from += rot; /* go right rot positions */
+ if (from > last) from -= len; /* (pointer better not wrap) */
+ if (from == start) break; /* all but one shifted */
+ *to = *from; /* shift left */
+ }
+ *to = tmp; /* complete the circle */
+ } while (--cycles);
+}
+
+/* structure for gzip file read operations */
+typedef struct {
+ int fd; /* file descriptor */
+ int size; /* 1 << size is bytes in buf */
+ unsigned left; /* bytes available at next */
+ unsigned char *buf; /* buffer */
+ z_const unsigned char *next; /* next byte in buffer */
+ char *name; /* file name for error messages */
+} file;
+
+/* reload buffer */
+local int readin(file *in)
+{
+ int len;
+
+ len = read(in->fd, in->buf, 1 << in->size);
+ if (len == -1) bye("error reading ", in->name);
+ in->left = (unsigned)len;
+ in->next = in->buf;
+ return len;
+}
+
+/* read from file in, exit if end-of-file */
+local int readmore(file *in)
+{
+ if (readin(in) == 0) bye("unexpected end of ", in->name);
+ return 0;
+}
+
+#define read1(in) (in->left == 0 ? readmore(in) : 0, \
+ in->left--, *(in->next)++)
+
+/* skip over n bytes of in */
+local void skip(file *in, unsigned n)
+{
+ unsigned bypass;
+
+ if (n > in->left) {
+ n -= in->left;
+ bypass = n & ~((1U << in->size) - 1);
+ if (bypass) {
+ if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1)
+ bye("seeking ", in->name);
+ n -= bypass;
+ }
+ readmore(in);
+ if (n > in->left)
+ bye("unexpected end of ", in->name);
+ }
+ in->left -= n;
+ in->next += n;
+}
+
+/* read a four-byte unsigned integer, little-endian, from in */
+unsigned long read4(file *in)
+{
+ unsigned long val;
+
+ val = read1(in);
+ val += (unsigned)read1(in) << 8;
+ val += (unsigned long)read1(in) << 16;
+ val += (unsigned long)read1(in) << 24;
+ return val;
+}
+
+/* skip over gzip header */
+local void gzheader(file *in)
+{
+ int flags;
+ unsigned n;
+
+ if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file");
+ if (read1(in) != 8) bye("unknown compression method in", in->name);
+ flags = read1(in);
+ if (flags & 0xe0) bye("unknown header flags set in", in->name);
+ skip(in, 6);
+ if (flags & 4) {
+ n = read1(in);
+ n += (unsigned)(read1(in)) << 8;
+ skip(in, n);
+ }
+ if (flags & 8) while (read1(in) != 0) ;
+ if (flags & 16) while (read1(in) != 0) ;
+ if (flags & 2) skip(in, 2);
+}
+
+/* decompress gzip file "name", return strm with a deflate stream ready to
+ continue compression of the data in the gzip file, and return a file
+ descriptor pointing to where to write the compressed data -- the deflate
+ stream is initialized to compress using level "level" */
+local int gzscan(char *name, z_stream *strm, int level)
+{
+ int ret, lastbit, left, full;
+ unsigned have;
+ unsigned long crc, tot;
+ unsigned char *window;
+ off_t lastoff, end;
+ file gz;
+
+ /* open gzip file */
+ gz.name = name;
+ gz.fd = open(name, O_RDWR, 0);
+ if (gz.fd == -1) bye("cannot open ", name);
+ gz.buf = malloc(CHUNK);
+ if (gz.buf == NULL) bye("out of memory", "");
+ gz.size = LGCHUNK;
+ gz.left = 0;
+
+ /* skip gzip header */
+ gzheader(&gz);
+
+ /* prepare to decompress */
+ window = malloc(DSIZE);
+ if (window == NULL) bye("out of memory", "");
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+ strm->opaque = Z_NULL;
+ ret = inflateInit2(strm, -15);
+ if (ret != Z_OK) bye("out of memory", " or library mismatch");
+
+ /* decompress the deflate stream, saving append information */
+ lastbit = 0;
+ lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
+ left = 0;
+ strm->avail_in = gz.left;
+ strm->next_in = gz.next;
+ crc = crc32(0L, Z_NULL, 0);
+ have = full = 0;
+ do {
+ /* if needed, get more input */
+ if (strm->avail_in == 0) {
+ readmore(&gz);
+ strm->avail_in = gz.left;
+ strm->next_in = gz.next;
+ }
+
+ /* set up output to next available section of sliding window */
+ strm->avail_out = DSIZE - have;
+ strm->next_out = window + have;
+
+ /* inflate and check for errors */
+ ret = inflate(strm, Z_BLOCK);
+ if (ret == Z_STREAM_ERROR) bye("internal stream error!", "");
+ if (ret == Z_MEM_ERROR) bye("out of memory", "");
+ if (ret == Z_DATA_ERROR)
+ bye("invalid compressed data--format violated in", name);
+
+ /* update crc and sliding window pointer */
+ crc = crc32(crc, window + have, DSIZE - have - strm->avail_out);
+ if (strm->avail_out)
+ have = DSIZE - strm->avail_out;
+ else {
+ have = 0;
+ full = 1;
+ }
+
+ /* process end of block */
+ if (strm->data_type & 128) {
+ if (strm->data_type & 64)
+ left = strm->data_type & 0x1f;
+ else {
+ lastbit = strm->data_type & 0x1f;
+ lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in;
+ }
+ }
+ } while (ret != Z_STREAM_END);
+ inflateEnd(strm);
+ gz.left = strm->avail_in;
+ gz.next = strm->next_in;
+
+ /* save the location of the end of the compressed data */
+ end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
+
+ /* check gzip trailer and save total for deflate */
+ if (crc != read4(&gz))
+ bye("invalid compressed data--crc mismatch in ", name);
+ tot = strm->total_out;
+ if ((tot & 0xffffffffUL) != read4(&gz))
+ bye("invalid compressed data--length mismatch in", name);
+
+ /* if not at end of file, warn */
+ if (gz.left || readin(&gz))
+ fprintf(stderr,
+ "gzappend warning: junk at end of gzip file overwritten\n");
+
+ /* clear last block bit */
+ lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET);
+ if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
+ *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7)));
+ lseek(gz.fd, -1L, SEEK_CUR);
+ if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name);
+
+ /* if window wrapped, build dictionary from window by rotating */
+ if (full) {
+ rotate(window, DSIZE, have);
+ have = DSIZE;
+ }
+
+ /* set up deflate stream with window, crc, total_in, and leftover bits */
+ ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY);
+ if (ret != Z_OK) bye("out of memory", "");
+ deflateSetDictionary(strm, window, have);
+ strm->adler = crc;
+ strm->total_in = tot;
+ if (left) {
+ lseek(gz.fd, --end, SEEK_SET);
+ if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
+ deflatePrime(strm, 8 - left, *gz.buf);
+ }
+ lseek(gz.fd, end, SEEK_SET);
+
+ /* clean up and return */
+ free(window);
+ free(gz.buf);
+ return gz.fd;
+}
+
+/* append file "name" to gzip file gd using deflate stream strm -- if last
+ is true, then finish off the deflate stream at the end */
+local void gztack(char *name, int gd, z_stream *strm, int last)
+{
+ int fd, len, ret;
+ unsigned left;
+ unsigned char *in, *out;
+
+ /* open file to compress and append */
+ fd = 0;
+ if (name != NULL) {
+ fd = open(name, O_RDONLY, 0);
+ if (fd == -1)
+ fprintf(stderr, "gzappend warning: %s not found, skipping ...\n",
+ name);
+ }
+
+ /* allocate buffers */
+ in = malloc(CHUNK);
+ out = malloc(CHUNK);
+ if (in == NULL || out == NULL) bye("out of memory", "");
+
+ /* compress input file and append to gzip file */
+ do {
+ /* get more input */
+ len = read(fd, in, CHUNK);
+ if (len == -1) {
+ fprintf(stderr,
+ "gzappend warning: error reading %s, skipping rest ...\n",
+ name);
+ len = 0;
+ }
+ strm->avail_in = (unsigned)len;
+ strm->next_in = in;
+ if (len) strm->adler = crc32(strm->adler, in, (unsigned)len);
+
+ /* compress and write all available output */
+ do {
+ strm->avail_out = CHUNK;
+ strm->next_out = out;
+ ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH);
+ left = CHUNK - strm->avail_out;
+ while (left) {
+ len = write(gd, out + CHUNK - strm->avail_out - left, left);
+ if (len == -1) bye("writing gzip file", "");
+ left -= (unsigned)len;
+ }
+ } while (strm->avail_out == 0 && ret != Z_STREAM_END);
+ } while (len != 0);
+
+ /* write trailer after last entry */
+ if (last) {
+ deflateEnd(strm);
+ out[0] = (unsigned char)(strm->adler);
+ out[1] = (unsigned char)(strm->adler >> 8);
+ out[2] = (unsigned char)(strm->adler >> 16);
+ out[3] = (unsigned char)(strm->adler >> 24);
+ out[4] = (unsigned char)(strm->total_in);
+ out[5] = (unsigned char)(strm->total_in >> 8);
+ out[6] = (unsigned char)(strm->total_in >> 16);
+ out[7] = (unsigned char)(strm->total_in >> 24);
+ len = 8;
+ do {
+ ret = write(gd, out + 8 - len, len);
+ if (ret == -1) bye("writing gzip file", "");
+ len -= ret;
+ } while (len);
+ close(gd);
+ }
+
+ /* clean up and return */
+ free(out);
+ free(in);
+ if (fd > 0) close(fd);
+}
+
+/* process the compression level option if present, scan the gzip file, and
+ append the specified files, or append the data from stdin if no other file
+ names are provided on the command line -- the gzip file must be writable
+ and seekable */
+int main(int argc, char **argv)
+{
+ int gd, level;
+ z_stream strm;
+
+ /* ignore command name */
+ argc--; argv++;
+
+ /* provide usage if no arguments */
+ if (*argv == NULL) {
+ printf(
+ "gzappend 1.2 (11 Oct 2012) Copyright (C) 2003, 2012 Mark Adler\n"
+ );
+ printf(
+ "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n");
+ return 0;
+ }
+
+ /* set compression level */
+ level = Z_DEFAULT_COMPRESSION;
+ if (argv[0][0] == '-') {
+ if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0)
+ bye("invalid compression level", "");
+ level = argv[0][1] - '0';
+ if (*++argv == NULL) bye("no gzip file name after options", "");
+ }
+
+ /* prepare to append to gzip file */
+ gd = gzscan(*argv++, &strm, level);
+
+ /* append files on command line, or from stdin if none */
+ if (*argv == NULL)
+ gztack(NULL, gd, &strm, 1);
+ else
+ do {
+ gztack(*argv, gd, &strm, argv[1] == NULL);
+ } while (*++argv != NULL);
+ return 0;
+}
--- /dev/null
+/* gzjoin -- command to join gzip files into one gzip file
+
+ Copyright (C) 2004, 2005, 2012 Mark Adler, all rights reserved
+ version 1.2, 14 Aug 2012
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler@alumni.caltech.edu
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 11 Dec 2004 - First version
+ * 1.1 12 Jun 2005 - Changed ssize_t to long for portability
+ * 1.2 14 Aug 2012 - Clean up for z_const usage
+ */
+
+/*
+ gzjoin takes one or more gzip files on the command line and writes out a
+ single gzip file that will uncompress to the concatenation of the
+ uncompressed data from the individual gzip files. gzjoin does this without
+ having to recompress any of the data and without having to calculate a new
+ crc32 for the concatenated uncompressed data. gzjoin does however have to
+ decompress all of the input data in order to find the bits in the compressed
+ data that need to be modified to concatenate the streams.
+
+ gzjoin does not do an integrity check on the input gzip files other than
+ checking the gzip header and decompressing the compressed data. They are
+ otherwise assumed to be complete and correct.
+
+ Each joint between gzip files removes at least 18 bytes of previous trailer
+ and subsequent header, and inserts an average of about three bytes to the
+ compressed data in order to connect the streams. The output gzip file
+ has a minimal ten-byte gzip header with no file name or modification time.
+
+ This program was written to illustrate the use of the Z_BLOCK option of
+ inflate() and the crc32_combine() function. gzjoin will not compile with
+ versions of zlib earlier than 1.2.3.
+ */
+
+#include <stdio.h> /* fputs(), fprintf(), fwrite(), putc() */
+#include <stdlib.h> /* exit(), malloc(), free() */
+#include <fcntl.h> /* open() */
+#include <unistd.h> /* close(), read(), lseek() */
+#include "zlib.h"
+ /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */
+
+#define local static
+
+/* exit with an error (return a value to allow use in an expression) */
+local int bail(char *why1, char *why2)
+{
+ fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2);
+ exit(1);
+ return 0;
+}
+
+/* -- simple buffered file input with access to the buffer -- */
+
+#define CHUNK 32768 /* must be a power of two and fit in unsigned */
+
+/* bin buffered input file type */
+typedef struct {
+ char *name; /* name of file for error messages */
+ int fd; /* file descriptor */
+ unsigned left; /* bytes remaining at next */
+ unsigned char *next; /* next byte to read */
+ unsigned char *buf; /* allocated buffer of length CHUNK */
+} bin;
+
+/* close a buffered file and free allocated memory */
+local void bclose(bin *in)
+{
+ if (in != NULL) {
+ if (in->fd != -1)
+ close(in->fd);
+ if (in->buf != NULL)
+ free(in->buf);
+ free(in);
+ }
+}
+
+/* open a buffered file for input, return a pointer to type bin, or NULL on
+ failure */
+local bin *bopen(char *name)
+{
+ bin *in;
+
+ in = malloc(sizeof(bin));
+ if (in == NULL)
+ return NULL;
+ in->buf = malloc(CHUNK);
+ in->fd = open(name, O_RDONLY, 0);
+ if (in->buf == NULL || in->fd == -1) {
+ bclose(in);
+ return NULL;
+ }
+ in->left = 0;
+ in->next = in->buf;
+ in->name = name;
+ return in;
+}
+
+/* load buffer from file, return -1 on read error, 0 or 1 on success, with
+ 1 indicating that end-of-file was reached */
+local int bload(bin *in)
+{
+ long len;
+
+ if (in == NULL)
+ return -1;
+ if (in->left != 0)
+ return 0;
+ in->next = in->buf;
+ do {
+ len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
+ if (len < 0)
+ return -1;
+ in->left += (unsigned)len;
+ } while (len != 0 && in->left < CHUNK);
+ return len == 0 ? 1 : 0;
+}
+
+/* get a byte from the file, bail if end of file */
+#define bget(in) (in->left ? 0 : bload(in), \
+ in->left ? (in->left--, *(in->next)++) : \
+ bail("unexpected end of file on ", in->name))
+
+/* get a four-byte little-endian unsigned integer from file */
+local unsigned long bget4(bin *in)
+{
+ unsigned long val;
+
+ val = bget(in);
+ val += (unsigned long)(bget(in)) << 8;
+ val += (unsigned long)(bget(in)) << 16;
+ val += (unsigned long)(bget(in)) << 24;
+ return val;
+}
+
+/* skip bytes in file */
+local void bskip(bin *in, unsigned skip)
+{
+ /* check pointer */
+ if (in == NULL)
+ return;
+
+ /* easy case -- skip bytes in buffer */
+ if (skip <= in->left) {
+ in->left -= skip;
+ in->next += skip;
+ return;
+ }
+
+ /* skip what's in buffer, discard buffer contents */
+ skip -= in->left;
+ in->left = 0;
+
+ /* seek past multiples of CHUNK bytes */
+ if (skip > CHUNK) {
+ unsigned left;
+
+ left = skip & (CHUNK - 1);
+ if (left == 0) {
+ /* exact number of chunks: seek all the way minus one byte to check
+ for end-of-file with a read */
+ lseek(in->fd, skip - 1, SEEK_CUR);
+ if (read(in->fd, in->buf, 1) != 1)
+ bail("unexpected end of file on ", in->name);
+ return;
+ }
+
+ /* skip the integral chunks, update skip with remainder */
+ lseek(in->fd, skip - left, SEEK_CUR);
+ skip = left;
+ }
+
+ /* read more input and skip remainder */
+ bload(in);
+ if (skip > in->left)
+ bail("unexpected end of file on ", in->name);
+ in->left -= skip;
+ in->next += skip;
+}
+
+/* -- end of buffered input functions -- */
+
+/* skip the gzip header from file in */
+local void gzhead(bin *in)
+{
+ int flags;
+
+ /* verify gzip magic header and compression method */
+ if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8)
+ bail(in->name, " is not a valid gzip file");
+
+ /* get and verify flags */
+ flags = bget(in);
+ if ((flags & 0xe0) != 0)
+ bail("unknown reserved bits set in ", in->name);
+
+ /* skip modification time, extra flags, and os */
+ bskip(in, 6);
+
+ /* skip extra field if present */
+ if (flags & 4) {
+ unsigned len;
+
+ len = bget(in);
+ len += (unsigned)(bget(in)) << 8;
+ bskip(in, len);
+ }
+
+ /* skip file name if present */
+ if (flags & 8)
+ while (bget(in) != 0)
+ ;
+
+ /* skip comment if present */
+ if (flags & 16)
+ while (bget(in) != 0)
+ ;
+
+ /* skip header crc if present */
+ if (flags & 2)
+ bskip(in, 2);
+}
+
+/* write a four-byte little-endian unsigned integer to out */
+local void put4(unsigned long val, FILE *out)
+{
+ putc(val & 0xff, out);
+ putc((val >> 8) & 0xff, out);
+ putc((val >> 16) & 0xff, out);
+ putc((val >> 24) & 0xff, out);
+}
+
+/* Load up zlib stream from buffered input, bail if end of file */
+local void zpull(z_streamp strm, bin *in)
+{
+ if (in->left == 0)
+ bload(in);
+ if (in->left == 0)
+ bail("unexpected end of file on ", in->name);
+ strm->avail_in = in->left;
+ strm->next_in = in->next;
+}
+
+/* Write header for gzip file to out and initialize trailer. */
+local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out)
+{
+ fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
+ *crc = crc32(0L, Z_NULL, 0);
+ *tot = 0;
+}
+
+/* Copy the compressed data from name, zeroing the last block bit of the last
+ block if clr is true, and adding empty blocks as needed to get to a byte
+ boundary. If clr is false, then the last block becomes the last block of
+ the output, and the gzip trailer is written. crc and tot maintains the
+ crc and length (modulo 2^32) of the output for the trailer. The resulting
+ gzip file is written to out. gzinit() must be called before the first call
+ of gzcopy() to write the gzip header and to initialize crc and tot. */
+local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot,
+ FILE *out)
+{
+ int ret; /* return value from zlib functions */
+ int pos; /* where the "last block" bit is in byte */
+ int last; /* true if processing the last block */
+ bin *in; /* buffered input file */
+ unsigned char *start; /* start of compressed data in buffer */
+ unsigned char *junk; /* buffer for uncompressed data -- discarded */
+ z_off_t len; /* length of uncompressed data (support > 4 GB) */
+ z_stream strm; /* zlib inflate stream */
+
+ /* open gzip file and skip header */
+ in = bopen(name);
+ if (in == NULL)
+ bail("could not open ", name);
+ gzhead(in);
+
+ /* allocate buffer for uncompressed data and initialize raw inflate
+ stream */
+ junk = malloc(CHUNK);
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -15);
+ if (junk == NULL || ret != Z_OK)
+ bail("out of memory", "");
+
+ /* inflate and copy compressed data, clear last-block bit if requested */
+ len = 0;
+ zpull(&strm, in);
+ start = in->next;
+ last = start[0] & 1;
+ if (last && clr)
+ start[0] &= ~1;
+ strm.avail_out = 0;
+ for (;;) {
+ /* if input used and output done, write used input and get more */
+ if (strm.avail_in == 0 && strm.avail_out != 0) {
+ fwrite(start, 1, strm.next_in - start, out);
+ start = in->buf;
+ in->left = 0;
+ zpull(&strm, in);
+ }
+
+ /* decompress -- return early when end-of-block reached */
+ strm.avail_out = CHUNK;
+ strm.next_out = junk;
+ ret = inflate(&strm, Z_BLOCK);
+ switch (ret) {
+ case Z_MEM_ERROR:
+ bail("out of memory", "");
+ case Z_DATA_ERROR:
+ bail("invalid compressed data in ", in->name);
+ }
+
+ /* update length of uncompressed data */
+ len += CHUNK - strm.avail_out;
+
+ /* check for block boundary (only get this when block copied out) */
+ if (strm.data_type & 128) {
+ /* if that was the last block, then done */
+ if (last)
+ break;
+
+ /* number of unused bits in last byte */
+ pos = strm.data_type & 7;
+
+ /* find the next last-block bit */
+ if (pos != 0) {
+ /* next last-block bit is in last used byte */
+ pos = 0x100 >> pos;
+ last = strm.next_in[-1] & pos;
+ if (last && clr)
+ in->buf[strm.next_in - in->buf - 1] &= ~pos;
+ }
+ else {
+ /* next last-block bit is in next unused byte */
+ if (strm.avail_in == 0) {
+ /* don't have that byte yet -- get it */
+ fwrite(start, 1, strm.next_in - start, out);
+ start = in->buf;
+ in->left = 0;
+ zpull(&strm, in);
+ }
+ last = strm.next_in[0] & 1;
+ if (last && clr)
+ in->buf[strm.next_in - in->buf] &= ~1;
+ }
+ }
+ }
+
+ /* update buffer with unused input */
+ in->left = strm.avail_in;
+ in->next = in->buf + (strm.next_in - in->buf);
+
+ /* copy used input, write empty blocks to get to byte boundary */
+ pos = strm.data_type & 7;
+ fwrite(start, 1, in->next - start - 1, out);
+ last = in->next[-1];
+ if (pos == 0 || !clr)
+ /* already at byte boundary, or last file: write last byte */
+ putc(last, out);
+ else {
+ /* append empty blocks to last byte */
+ last &= ((0x100 >> pos) - 1); /* assure unused bits are zero */
+ if (pos & 1) {
+ /* odd -- append an empty stored block */
+ putc(last, out);
+ if (pos == 1)
+ putc(0, out); /* two more bits in block header */
+ fwrite("\0\0\xff\xff", 1, 4, out);
+ }
+ else {
+ /* even -- append 1, 2, or 3 empty fixed blocks */
+ switch (pos) {
+ case 6:
+ putc(last | 8, out);
+ last = 0;
+ case 4:
+ putc(last | 0x20, out);
+ last = 0;
+ case 2:
+ putc(last | 0x80, out);
+ putc(0, out);
+ }
+ }
+ }
+
+ /* update crc and tot */
+ *crc = crc32_combine(*crc, bget4(in), len);
+ *tot += (unsigned long)len;
+
+ /* clean up */
+ inflateEnd(&strm);
+ free(junk);
+ bclose(in);
+
+ /* write trailer if this is the last gzip file */
+ if (!clr) {
+ put4(*crc, out);
+ put4(*tot, out);
+ }
+}
+
+/* join the gzip files on the command line, write result to stdout */
+int main(int argc, char **argv)
+{
+ unsigned long crc, tot; /* running crc and total uncompressed length */
+
+ /* skip command name */
+ argc--;
+ argv++;
+
+ /* show usage if no arguments */
+ if (argc == 0) {
+ fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n",
+ stderr);
+ return 0;
+ }
+
+ /* join gzip files on command line and write to stdout */
+ gzinit(&crc, &tot, stdout);
+ while (argc--)
+ gzcopy(*argv++, argc, &crc, &tot, stdout);
+
+ /* done */
+ return 0;
+}
--- /dev/null
+/*
+ * gzlog.c
+ * Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved
+ * For conditions of distribution and use, see copyright notice in gzlog.h
+ * version 2.2, 14 Aug 2012
+ */
+
+/*
+ gzlog provides a mechanism for frequently appending short strings to a gzip
+ file that is efficient both in execution time and compression ratio. The
+ strategy is to write the short strings in an uncompressed form to the end of
+ the gzip file, only compressing when the amount of uncompressed data has
+ reached a given threshold.
+
+ gzlog also provides protection against interruptions in the process due to
+ system crashes. The status of the operation is recorded in an extra field
+ in the gzip file, and is only updated once the gzip file is brought to a
+ valid state. The last data to be appended or compressed is saved in an
+ auxiliary file, so that if the operation is interrupted, it can be completed
+ the next time an append operation is attempted.
+
+ gzlog maintains another auxiliary file with the last 32K of data from the
+ compressed portion, which is preloaded for the compression of the subsequent
+ data. This minimizes the impact to the compression ratio of appending.
+ */
+
+/*
+ Operations Concept:
+
+ Files (log name "foo"):
+ foo.gz -- gzip file with the complete log
+ foo.add -- last message to append or last data to compress
+ foo.dict -- dictionary of the last 32K of data for next compression
+ foo.temp -- temporary dictionary file for compression after this one
+ foo.lock -- lock file for reading and writing the other files
+ foo.repairs -- log file for log file recovery operations (not compressed)
+
+ gzip file structure:
+ - fixed-length (no file name) header with extra field (see below)
+ - compressed data ending initially with empty stored block
+ - uncompressed data filling out originally empty stored block and
+ subsequent stored blocks as needed (16K max each)
+ - gzip trailer
+ - no junk at end (no other gzip streams)
+
+ When appending data, the information in the first three items above plus the
+ foo.add file are sufficient to recover an interrupted append operation. The
+ extra field has the necessary information to restore the start of the last
+ stored block and determine where to append the data in the foo.add file, as
+ well as the crc and length of the gzip data before the append operation.
+
+ The foo.add file is created before the gzip file is marked for append, and
+ deleted after the gzip file is marked as complete. So if the append
+ operation is interrupted, the data to add will still be there. If due to
+ some external force, the foo.add file gets deleted between when the append
+ operation was interrupted and when recovery is attempted, the gzip file will
+ still be restored, but without the appended data.
+
+ When compressing data, the information in the first two items above plus the
+ foo.add file are sufficient to recover an interrupted compress operation.
+ The extra field has the necessary information to find the end of the
+ compressed data, and contains both the crc and length of just the compressed
+ data and of the complete set of data including the contents of the foo.add
+ file.
+
+ Again, the foo.add file is maintained during the compress operation in case
+ of an interruption. If in the unlikely event the foo.add file with the data
+ to be compressed is missing due to some external force, a gzip file with
+ just the previous compressed data will be reconstructed. In this case, all
+ of the data that was to be compressed is lost (approximately one megabyte).
+ This will not occur if all that happened was an interruption of the compress
+ operation.
+
+ The third state that is marked is the replacement of the old dictionary with
+ the new dictionary after a compress operation. Once compression is
+ complete, the gzip file is marked as being in the replace state. This
+ completes the gzip file, so an interrupt after being so marked does not
+ result in recompression. Then the dictionary file is replaced, and the gzip
+ file is marked as completed. This state prevents the possibility of
+ restarting compression with the wrong dictionary file.
+
+ All three operations are wrapped by a lock/unlock procedure. In order to
+ gain exclusive access to the log files, first a foo.lock file must be
+ exclusively created. When all operations are complete, the lock is
+ released by deleting the foo.lock file. If when attempting to create the
+ lock file, it already exists and the modify time of the lock file is more
+ than five minutes old (set by the PATIENCE define below), then the old
+ lock file is considered stale and deleted, and the exclusive creation of
+ the lock file is retried. To assure that there are no false assessments
+ of the staleness of the lock file, the operations periodically touch the
+ lock file to update the modified date.
+
+ Following is the definition of the extra field with all of the information
+ required to enable the above append and compress operations and their
+ recovery if interrupted. Multi-byte values are stored little endian
+ (consistent with the gzip format). File pointers are eight bytes long.
+ The crc's and lengths for the gzip trailer are four bytes long. (Note that
+ the length at the end of a gzip file is used for error checking only, and
+ for large files is actually the length modulo 2^32.) The stored block
+ length is two bytes long. The gzip extra field two-byte identification is
+ "ap" for append. It is assumed that writing the extra field to the file is
+ an "atomic" operation. That is, either all of the extra field is written
+ to the file, or none of it is, if the operation is interrupted right at the
+ point of updating the extra field. This is a reasonable assumption, since
+ the extra field is within the first 52 bytes of the file, which is smaller
+ than any expected block size for a mass storage device (usually 512 bytes or
+ larger).
+
+ Extra field (35 bytes):
+ - Pointer to first stored block length -- this points to the two-byte length
+ of the first stored block, which is followed by the two-byte, one's
+ complement of that length. The stored block length is preceded by the
+ three-bit header of the stored block, which is the actual start of the
+ stored block in the deflate format. See the bit offset field below.
+ - Pointer to the last stored block length. This is the same as above, but
+ for the last stored block of the uncompressed data in the gzip file.
+ Initially this is the same as the first stored block length pointer.
+ When the stored block gets to 16K (see the MAX_STORE define), then a new
+ stored block as added, at which point the last stored block length pointer
+ is different from the first stored block length pointer. When they are
+ different, the first bit of the last stored block header is eight bits, or
+ one byte back from the block length.
+ - Compressed data crc and length. This is the crc and length of the data
+ that is in the compressed portion of the deflate stream. These are used
+ only in the event that the foo.add file containing the data to compress is
+ lost after a compress operation is interrupted.
+ - Total data crc and length. This is the crc and length of all of the data
+ stored in the gzip file, compressed and uncompressed. It is used to
+ reconstruct the gzip trailer when compressing, as well as when recovering
+ interrupted operations.
+ - Final stored block length. This is used to quickly find where to append,
+ and allows the restoration of the original final stored block state when
+ an append operation is interrupted.
+ - First stored block start as the number of bits back from the final stored
+ block first length byte. This value is in the range of 3..10, and is
+ stored as the low three bits of the final byte of the extra field after
+ subtracting three (0..7). This allows the last-block bit of the stored
+ block header to be updated when a new stored block is added, for the case
+ when the first stored block and the last stored block are the same. (When
+ they are different, the numbers of bits back is known to be eight.) This
+ also allows for new compressed data to be appended to the old compressed
+ data in the compress operation, overwriting the previous first stored
+ block, or for the compressed data to be terminated and a valid gzip file
+ reconstructed on the off chance that a compression operation was
+ interrupted and the data to compress in the foo.add file was deleted.
+ - The operation in process. This is the next two bits in the last byte (the
+ bits under the mask 0x18). The are interpreted as 0: nothing in process,
+ 1: append in process, 2: compress in process, 3: replace in process.
+ - The top three bits of the last byte in the extra field are reserved and
+ are currently set to zero.
+
+ Main procedure:
+ - Exclusively create the foo.lock file using the O_CREAT and O_EXCL modes of
+ the system open() call. If the modify time of an existing lock file is
+ more than PATIENCE seconds old, then the lock file is deleted and the
+ exclusive create is retried.
+ - Load the extra field from the foo.gz file, and see if an operation was in
+ progress but not completed. If so, apply the recovery procedure below.
+ - Perform the append procedure with the provided data.
+ - If the uncompressed data in the foo.gz file is 1MB or more, apply the
+ compress procedure.
+ - Delete the foo.lock file.
+
+ Append procedure:
+ - Put what to append in the foo.add file so that the operation can be
+ restarted if this procedure is interrupted.
+ - Mark the foo.gz extra field with the append operation in progress.
+ + Restore the original last-block bit and stored block length of the last
+ stored block from the information in the extra field, in case a previous
+ append operation was interrupted.
+ - Append the provided data to the last stored block, creating new stored
+ blocks as needed and updating the stored blocks last-block bits and
+ lengths.
+ - Update the crc and length with the new data, and write the gzip trailer.
+ - Write over the extra field (with a single write operation) with the new
+ pointers, lengths, and crc's, and mark the gzip file as not in process.
+ Though there is still a foo.add file, it will be ignored since nothing
+ is in process. If a foo.add file is leftover from a previously
+ completed operation, it is truncated when writing new data to it.
+ - Delete the foo.add file.
+
+ Compress and replace procedures:
+ - Read all of the uncompressed data in the stored blocks in foo.gz and write
+ it to foo.add. Also write foo.temp with the last 32K of that data to
+ provide a dictionary for the next invocation of this procedure.
+ - Rewrite the extra field marking foo.gz with a compression in process.
+ * If there is no data provided to compress (due to a missing foo.add file
+ when recovering), reconstruct and truncate the foo.gz file to contain
+ only the previous compressed data and proceed to the step after the next
+ one. Otherwise ...
+ - Compress the data with the dictionary in foo.dict, and write to the
+ foo.gz file starting at the bit immediately following the last previously
+ compressed block. If there is no foo.dict, proceed anyway with the
+ compression at slightly reduced efficiency. (For the foo.dict file to be
+ missing requires some external failure beyond simply the interruption of
+ a compress operation.) During this process, the foo.lock file is
+ periodically touched to assure that that file is not considered stale by
+ another process before we're done. The deflation is terminated with a
+ non-last empty static block (10 bits long), that is then located and
+ written over by a last-bit-set empty stored block.
+ - Append the crc and length of the data in the gzip file (previously
+ calculated during the append operations).
+ - Write over the extra field with the updated stored block offsets, bits
+ back, crc's, and lengths, and mark foo.gz as in process for a replacement
+ of the dictionary.
+ @ Delete the foo.add file.
+ - Replace foo.dict with foo.temp.
+ - Write over the extra field, marking foo.gz as complete.
+
+ Recovery procedure:
+ - If not a replace recovery, read in the foo.add file, and provide that data
+ to the appropriate recovery below. If there is no foo.add file, provide
+ a zero data length to the recovery. In that case, the append recovery
+ restores the foo.gz to the previous compressed + uncompressed data state.
+ For the the compress recovery, a missing foo.add file results in foo.gz
+ being restored to the previous compressed-only data state.
+ - Append recovery:
+ - Pick up append at + step above
+ - Compress recovery:
+ - Pick up compress at * step above
+ - Replace recovery:
+ - Pick up compress at @ step above
+ - Log the repair with a date stamp in foo.repairs
+ */
+
+#include <sys/types.h>
+#include <stdio.h> /* rename, fopen, fprintf, fclose */
+#include <stdlib.h> /* malloc, free */
+#include <string.h> /* strlen, strrchr, strcpy, strncpy, strcmp */
+#include <fcntl.h> /* open */
+#include <unistd.h> /* lseek, read, write, close, unlink, sleep, */
+ /* ftruncate, fsync */
+#include <errno.h> /* errno */
+#include <time.h> /* time, ctime */
+#include <sys/stat.h> /* stat */
+#include <sys/time.h> /* utimes */
+#include "zlib.h" /* crc32 */
+
+#include "gzlog.h" /* header for external access */
+
+#define local static
+typedef unsigned int uint;
+typedef unsigned long ulong;
+
+/* Macro for debugging to deterministically force recovery operations */
+#ifdef DEBUG
+ #include <setjmp.h> /* longjmp */
+ jmp_buf gzlog_jump; /* where to go back to */
+ int gzlog_bail = 0; /* which point to bail at (1..8) */
+ int gzlog_count = -1; /* number of times through to wait */
+# define BAIL(n) do { if (n == gzlog_bail && gzlog_count-- == 0) \
+ longjmp(gzlog_jump, gzlog_bail); } while (0)
+#else
+# define BAIL(n)
+#endif
+
+/* how old the lock file can be in seconds before considering it stale */
+#define PATIENCE 300
+
+/* maximum stored block size in Kbytes -- must be in 1..63 */
+#define MAX_STORE 16
+
+/* number of stored Kbytes to trigger compression (must be >= 32 to allow
+ dictionary construction, and <= 204 * MAX_STORE, in order for >> 10 to
+ discard the stored block headers contribution of five bytes each) */
+#define TRIGGER 1024
+
+/* size of a deflate dictionary (this cannot be changed) */
+#define DICT 32768U
+
+/* values for the operation (2 bits) */
+#define NO_OP 0
+#define APPEND_OP 1
+#define COMPRESS_OP 2
+#define REPLACE_OP 3
+
+/* macros to extract little-endian integers from an unsigned byte buffer */
+#define PULL2(p) ((p)[0]+((uint)((p)[1])<<8))
+#define PULL4(p) (PULL2(p)+((ulong)PULL2(p+2)<<16))
+#define PULL8(p) (PULL4(p)+((off_t)PULL4(p+4)<<32))
+
+/* macros to store integers into a byte buffer in little-endian order */
+#define PUT2(p,a) do {(p)[0]=a;(p)[1]=(a)>>8;} while(0)
+#define PUT4(p,a) do {PUT2(p,a);PUT2(p+2,a>>16);} while(0)
+#define PUT8(p,a) do {PUT4(p,a);PUT4(p+4,a>>32);} while(0)
+
+/* internal structure for log information */
+#define LOGID "\106\035\172" /* should be three non-zero characters */
+struct log {
+ char id[4]; /* contains LOGID to detect inadvertent overwrites */
+ int fd; /* file descriptor for .gz file, opened read/write */
+ char *path; /* allocated path, e.g. "/var/log/foo" or "foo" */
+ char *end; /* end of path, for appending suffices such as ".gz" */
+ off_t first; /* offset of first stored block first length byte */
+ int back; /* location of first block id in bits back from first */
+ uint stored; /* bytes currently in last stored block */
+ off_t last; /* offset of last stored block first length byte */
+ ulong ccrc; /* crc of compressed data */
+ ulong clen; /* length (modulo 2^32) of compressed data */
+ ulong tcrc; /* crc of total data */
+ ulong tlen; /* length (modulo 2^32) of total data */
+ time_t lock; /* last modify time of our lock file */
+};
+
+/* gzip header for gzlog */
+local unsigned char log_gzhead[] = {
+ 0x1f, 0x8b, /* magic gzip id */
+ 8, /* compression method is deflate */
+ 4, /* there is an extra field (no file name) */
+ 0, 0, 0, 0, /* no modification time provided */
+ 0, 0xff, /* no extra flags, no OS specified */
+ 39, 0, 'a', 'p', 35, 0 /* extra field with "ap" subfield */
+ /* 35 is EXTRA, 39 is EXTRA + 4 */
+};
+
+#define HEAD sizeof(log_gzhead) /* should be 16 */
+
+/* initial gzip extra field content (52 == HEAD + EXTRA + 1) */
+local unsigned char log_gzext[] = {
+ 52, 0, 0, 0, 0, 0, 0, 0, /* offset of first stored block length */
+ 52, 0, 0, 0, 0, 0, 0, 0, /* offset of last stored block length */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* compressed data crc and length */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* total data crc and length */
+ 0, 0, /* final stored block data length */
+ 5 /* op is NO_OP, last bit 8 bits back */
+};
+
+#define EXTRA sizeof(log_gzext) /* should be 35 */
+
+/* initial gzip data and trailer */
+local unsigned char log_gzbody[] = {
+ 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */
+ 0, 0, 0, 0, /* crc */
+ 0, 0, 0, 0 /* uncompressed length */
+};
+
+#define BODY sizeof(log_gzbody)
+
+/* Exclusively create foo.lock in order to negotiate exclusive access to the
+ foo.* files. If the modify time of an existing lock file is greater than
+ PATIENCE seconds in the past, then consider the lock file to have been
+ abandoned, delete it, and try the exclusive create again. Save the lock
+ file modify time for verification of ownership. Return 0 on success, or -1
+ on failure, usually due to an access restriction or invalid path. Note that
+ if stat() or unlink() fails, it may be due to another process noticing the
+ abandoned lock file a smidge sooner and deleting it, so those are not
+ flagged as an error. */
+local int log_lock(struct log *log)
+{
+ int fd;
+ struct stat st;
+
+ strcpy(log->end, ".lock");
+ while ((fd = open(log->path, O_CREAT | O_EXCL, 0644)) < 0) {
+ if (errno != EEXIST)
+ return -1;
+ if (stat(log->path, &st) == 0 && time(NULL) - st.st_mtime > PATIENCE) {
+ unlink(log->path);
+ continue;
+ }
+ sleep(2); /* relinquish the CPU for two seconds while waiting */
+ }
+ close(fd);
+ if (stat(log->path, &st) == 0)
+ log->lock = st.st_mtime;
+ return 0;
+}
+
+/* Update the modify time of the lock file to now, in order to prevent another
+ task from thinking that the lock is stale. Save the lock file modify time
+ for verification of ownership. */
+local void log_touch(struct log *log)
+{
+ struct stat st;
+
+ strcpy(log->end, ".lock");
+ utimes(log->path, NULL);
+ if (stat(log->path, &st) == 0)
+ log->lock = st.st_mtime;
+}
+
+/* Check the log file modify time against what is expected. Return true if
+ this is not our lock. If it is our lock, touch it to keep it. */
+local int log_check(struct log *log)
+{
+ struct stat st;
+
+ strcpy(log->end, ".lock");
+ if (stat(log->path, &st) || st.st_mtime != log->lock)
+ return 1;
+ log_touch(log);
+ return 0;
+}
+
+/* Unlock a previously acquired lock, but only if it's ours. */
+local void log_unlock(struct log *log)
+{
+ if (log_check(log))
+ return;
+ strcpy(log->end, ".lock");
+ unlink(log->path);
+ log->lock = 0;
+}
+
+/* Check the gzip header and read in the extra field, filling in the values in
+ the log structure. Return op on success or -1 if the gzip header was not as
+ expected. op is the current operation in progress last written to the extra
+ field. This assumes that the gzip file has already been opened, with the
+ file descriptor log->fd. */
+local int log_head(struct log *log)
+{
+ int op;
+ unsigned char buf[HEAD + EXTRA];
+
+ if (lseek(log->fd, 0, SEEK_SET) < 0 ||
+ read(log->fd, buf, HEAD + EXTRA) != HEAD + EXTRA ||
+ memcmp(buf, log_gzhead, HEAD)) {
+ return -1;
+ }
+ log->first = PULL8(buf + HEAD);
+ log->last = PULL8(buf + HEAD + 8);
+ log->ccrc = PULL4(buf + HEAD + 16);
+ log->clen = PULL4(buf + HEAD + 20);
+ log->tcrc = PULL4(buf + HEAD + 24);
+ log->tlen = PULL4(buf + HEAD + 28);
+ log->stored = PULL2(buf + HEAD + 32);
+ log->back = 3 + (buf[HEAD + 34] & 7);
+ op = (buf[HEAD + 34] >> 3) & 3;
+ return op;
+}
+
+/* Write over the extra field contents, marking the operation as op. Use fsync
+ to assure that the device is written to, and in the requested order. This
+ operation, and only this operation, is assumed to be atomic in order to
+ assure that the log is recoverable in the event of an interruption at any
+ point in the process. Return -1 if the write to foo.gz failed. */
+local int log_mark(struct log *log, int op)
+{
+ int ret;
+ unsigned char ext[EXTRA];
+
+ PUT8(ext, log->first);
+ PUT8(ext + 8, log->last);
+ PUT4(ext + 16, log->ccrc);
+ PUT4(ext + 20, log->clen);
+ PUT4(ext + 24, log->tcrc);
+ PUT4(ext + 28, log->tlen);
+ PUT2(ext + 32, log->stored);
+ ext[34] = log->back - 3 + (op << 3);
+ fsync(log->fd);
+ ret = lseek(log->fd, HEAD, SEEK_SET) < 0 ||
+ write(log->fd, ext, EXTRA) != EXTRA ? -1 : 0;
+ fsync(log->fd);
+ return ret;
+}
+
+/* Rewrite the last block header bits and subsequent zero bits to get to a byte
+ boundary, setting the last block bit if last is true, and then write the
+ remainder of the stored block header (length and one's complement). Leave
+ the file pointer after the end of the last stored block data. Return -1 if
+ there is a read or write failure on the foo.gz file */
+local int log_last(struct log *log, int last)
+{
+ int back, len, mask;
+ unsigned char buf[6];
+
+ /* determine the locations of the bytes and bits to modify */
+ back = log->last == log->first ? log->back : 8;
+ len = back > 8 ? 2 : 1; /* bytes back from log->last */
+ mask = 0x80 >> ((back - 1) & 7); /* mask for block last-bit */
+
+ /* get the byte to modify (one or two back) into buf[0] -- don't need to
+ read the byte if the last-bit is eight bits back, since in that case
+ the entire byte will be modified */
+ buf[0] = 0;
+ if (back != 8 && (lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+ read(log->fd, buf, 1) != 1))
+ return -1;
+
+ /* change the last-bit of the last stored block as requested -- note
+ that all bits above the last-bit are set to zero, per the type bits
+ of a stored block being 00 and per the convention that the bits to
+ bring the stream to a byte boundary are also zeros */
+ buf[1] = 0;
+ buf[2 - len] = (*buf & (mask - 1)) + (last ? mask : 0);
+
+ /* write the modified stored block header and lengths, move the file
+ pointer to after the last stored block data */
+ PUT2(buf + 2, log->stored);
+ PUT2(buf + 4, log->stored ^ 0xffff);
+ return lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+ write(log->fd, buf + 2 - len, len + 4) != len + 4 ||
+ lseek(log->fd, log->stored, SEEK_CUR) < 0 ? -1 : 0;
+}
+
+/* Append len bytes from data to the locked and open log file. len may be zero
+ if recovering and no .add file was found. In that case, the previous state
+ of the foo.gz file is restored. The data is appended uncompressed in
+ deflate stored blocks. Return -1 if there was an error reading or writing
+ the foo.gz file. */
+local int log_append(struct log *log, unsigned char *data, size_t len)
+{
+ uint put;
+ off_t end;
+ unsigned char buf[8];
+
+ /* set the last block last-bit and length, in case recovering an
+ interrupted append, then position the file pointer to append to the
+ block */
+ if (log_last(log, 1))
+ return -1;
+
+ /* append, adding stored blocks and updating the offset of the last stored
+ block as needed, and update the total crc and length */
+ while (len) {
+ /* append as much as we can to the last block */
+ put = (MAX_STORE << 10) - log->stored;
+ if (put > len)
+ put = (uint)len;
+ if (put) {
+ if (write(log->fd, data, put) != put)
+ return -1;
+ BAIL(1);
+ log->tcrc = crc32(log->tcrc, data, put);
+ log->tlen += put;
+ log->stored += put;
+ data += put;
+ len -= put;
+ }
+
+ /* if we need to, add a new empty stored block */
+ if (len) {
+ /* mark current block as not last */
+ if (log_last(log, 0))
+ return -1;
+
+ /* point to new, empty stored block */
+ log->last += 4 + log->stored + 1;
+ log->stored = 0;
+ }
+
+ /* mark last block as last, update its length */
+ if (log_last(log, 1))
+ return -1;
+ BAIL(2);
+ }
+
+ /* write the new crc and length trailer, and truncate just in case (could
+ be recovering from partial append with a missing foo.add file) */
+ PUT4(buf, log->tcrc);
+ PUT4(buf + 4, log->tlen);
+ if (write(log->fd, buf, 8) != 8 ||
+ (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+ return -1;
+
+ /* write the extra field, marking the log file as done, delete .add file */
+ if (log_mark(log, NO_OP))
+ return -1;
+ strcpy(log->end, ".add");
+ unlink(log->path); /* ignore error, since may not exist */
+ return 0;
+}
+
+/* Replace the foo.dict file with the foo.temp file. Also delete the foo.add
+ file, since the compress operation may have been interrupted before that was
+ done. Returns 1 if memory could not be allocated, or -1 if reading or
+ writing foo.gz fails, or if the rename fails for some reason other than
+ foo.temp not existing. foo.temp not existing is a permitted error, since
+ the replace operation may have been interrupted after the rename is done,
+ but before foo.gz is marked as complete. */
+local int log_replace(struct log *log)
+{
+ int ret;
+ char *dest;
+
+ /* delete foo.add file */
+ strcpy(log->end, ".add");
+ unlink(log->path); /* ignore error, since may not exist */
+ BAIL(3);
+
+ /* rename foo.name to foo.dict, replacing foo.dict if it exists */
+ strcpy(log->end, ".dict");
+ dest = malloc(strlen(log->path) + 1);
+ if (dest == NULL)
+ return -2;
+ strcpy(dest, log->path);
+ strcpy(log->end, ".temp");
+ ret = rename(log->path, dest);
+ free(dest);
+ if (ret && errno != ENOENT)
+ return -1;
+ BAIL(4);
+
+ /* mark the foo.gz file as done */
+ return log_mark(log, NO_OP);
+}
+
+/* Compress the len bytes at data and append the compressed data to the
+ foo.gz deflate data immediately after the previous compressed data. This
+ overwrites the previous uncompressed data, which was stored in foo.add
+ and is the data provided in data[0..len-1]. If this operation is
+ interrupted, it picks up at the start of this routine, with the foo.add
+ file read in again. If there is no data to compress (len == 0), then we
+ simply terminate the foo.gz file after the previously compressed data,
+ appending a final empty stored block and the gzip trailer. Return -1 if
+ reading or writing the log.gz file failed, or -2 if there was a memory
+ allocation failure. */
+local int log_compress(struct log *log, unsigned char *data, size_t len)
+{
+ int fd;
+ uint got, max;
+ ssize_t dict;
+ off_t end;
+ z_stream strm;
+ unsigned char buf[DICT];
+
+ /* compress and append compressed data */
+ if (len) {
+ /* set up for deflate, allocating memory */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ if (deflateInit2(&strm, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -15, 8,
+ Z_DEFAULT_STRATEGY) != Z_OK)
+ return -2;
+
+ /* read in dictionary (last 32K of data that was compressed) */
+ strcpy(log->end, ".dict");
+ fd = open(log->path, O_RDONLY, 0);
+ if (fd >= 0) {
+ dict = read(fd, buf, DICT);
+ close(fd);
+ if (dict < 0) {
+ deflateEnd(&strm);
+ return -1;
+ }
+ if (dict)
+ deflateSetDictionary(&strm, buf, (uint)dict);
+ }
+ log_touch(log);
+
+ /* prime deflate with last bits of previous block, position write
+ pointer to write those bits and overwrite what follows */
+ if (lseek(log->fd, log->first - (log->back > 8 ? 2 : 1),
+ SEEK_SET) < 0 ||
+ read(log->fd, buf, 1) != 1 || lseek(log->fd, -1, SEEK_CUR) < 0) {
+ deflateEnd(&strm);
+ return -1;
+ }
+ deflatePrime(&strm, (8 - log->back) & 7, *buf);
+
+ /* compress, finishing with a partial non-last empty static block */
+ strm.next_in = data;
+ max = (((uint)0 - 1) >> 1) + 1; /* in case int smaller than size_t */
+ do {
+ strm.avail_in = len > max ? max : (uint)len;
+ len -= strm.avail_in;
+ do {
+ strm.avail_out = DICT;
+ strm.next_out = buf;
+ deflate(&strm, len ? Z_NO_FLUSH : Z_PARTIAL_FLUSH);
+ got = DICT - strm.avail_out;
+ if (got && write(log->fd, buf, got) != got) {
+ deflateEnd(&strm);
+ return -1;
+ }
+ log_touch(log);
+ } while (strm.avail_out == 0);
+ } while (len);
+ deflateEnd(&strm);
+ BAIL(5);
+
+ /* find start of empty static block -- scanning backwards the first one
+ bit is the second bit of the block, if the last byte is zero, then
+ we know the byte before that has a one in the top bit, since an
+ empty static block is ten bits long */
+ if ((log->first = lseek(log->fd, -1, SEEK_CUR)) < 0 ||
+ read(log->fd, buf, 1) != 1)
+ return -1;
+ log->first++;
+ if (*buf) {
+ log->back = 1;
+ while ((*buf & ((uint)1 << (8 - log->back++))) == 0)
+ ; /* guaranteed to terminate, since *buf != 0 */
+ }
+ else
+ log->back = 10;
+
+ /* update compressed crc and length */
+ log->ccrc = log->tcrc;
+ log->clen = log->tlen;
+ }
+ else {
+ /* no data to compress -- fix up existing gzip stream */
+ log->tcrc = log->ccrc;
+ log->tlen = log->clen;
+ }
+
+ /* complete and truncate gzip stream */
+ log->last = log->first;
+ log->stored = 0;
+ PUT4(buf, log->tcrc);
+ PUT4(buf + 4, log->tlen);
+ if (log_last(log, 1) || write(log->fd, buf, 8) != 8 ||
+ (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+ return -1;
+ BAIL(6);
+
+ /* mark as being in the replace operation */
+ if (log_mark(log, REPLACE_OP))
+ return -1;
+
+ /* execute the replace operation and mark the file as done */
+ return log_replace(log);
+}
+
+/* log a repair record to the .repairs file */
+local void log_log(struct log *log, int op, char *record)
+{
+ time_t now;
+ FILE *rec;
+
+ now = time(NULL);
+ strcpy(log->end, ".repairs");
+ rec = fopen(log->path, "a");
+ if (rec == NULL)
+ return;
+ fprintf(rec, "%.24s %s recovery: %s\n", ctime(&now), op == APPEND_OP ?
+ "append" : (op == COMPRESS_OP ? "compress" : "replace"), record);
+ fclose(rec);
+ return;
+}
+
+/* Recover the interrupted operation op. First read foo.add for recovering an
+ append or compress operation. Return -1 if there was an error reading or
+ writing foo.gz or reading an existing foo.add, or -2 if there was a memory
+ allocation failure. */
+local int log_recover(struct log *log, int op)
+{
+ int fd, ret = 0;
+ unsigned char *data = NULL;
+ size_t len = 0;
+ struct stat st;
+
+ /* log recovery */
+ log_log(log, op, "start");
+
+ /* load foo.add file if expected and present */
+ if (op == APPEND_OP || op == COMPRESS_OP) {
+ strcpy(log->end, ".add");
+ if (stat(log->path, &st) == 0 && st.st_size) {
+ len = (size_t)(st.st_size);
+ if ((off_t)len != st.st_size ||
+ (data = malloc(st.st_size)) == NULL) {
+ log_log(log, op, "allocation failure");
+ return -2;
+ }
+ if ((fd = open(log->path, O_RDONLY, 0)) < 0) {
+ log_log(log, op, ".add file read failure");
+ return -1;
+ }
+ ret = (size_t)read(fd, data, len) != len;
+ close(fd);
+ if (ret) {
+ log_log(log, op, ".add file read failure");
+ return -1;
+ }
+ log_log(log, op, "loaded .add file");
+ }
+ else
+ log_log(log, op, "missing .add file!");
+ }
+
+ /* recover the interrupted operation */
+ switch (op) {
+ case APPEND_OP:
+ ret = log_append(log, data, len);
+ break;
+ case COMPRESS_OP:
+ ret = log_compress(log, data, len);
+ break;
+ case REPLACE_OP:
+ ret = log_replace(log);
+ }
+
+ /* log status */
+ log_log(log, op, ret ? "failure" : "complete");
+
+ /* clean up */
+ if (data != NULL)
+ free(data);
+ return ret;
+}
+
+/* Close the foo.gz file (if open) and release the lock. */
+local void log_close(struct log *log)
+{
+ if (log->fd >= 0)
+ close(log->fd);
+ log->fd = -1;
+ log_unlock(log);
+}
+
+/* Open foo.gz, verify the header, and load the extra field contents, after
+ first creating the foo.lock file to gain exclusive access to the foo.*
+ files. If foo.gz does not exist or is empty, then write the initial header,
+ extra, and body content of an empty foo.gz log file. If there is an error
+ creating the lock file due to access restrictions, or an error reading or
+ writing the foo.gz file, or if the foo.gz file is not a proper log file for
+ this object (e.g. not a gzip file or does not contain the expected extra
+ field), then return true. If there is an error, the lock is released.
+ Otherwise, the lock is left in place. */
+local int log_open(struct log *log)
+{
+ int op;
+
+ /* release open file resource if left over -- can occur if lock lost
+ between gzlog_open() and gzlog_write() */
+ if (log->fd >= 0)
+ close(log->fd);
+ log->fd = -1;
+
+ /* negotiate exclusive access */
+ if (log_lock(log) < 0)
+ return -1;
+
+ /* open the log file, foo.gz */
+ strcpy(log->end, ".gz");
+ log->fd = open(log->path, O_RDWR | O_CREAT, 0644);
+ if (log->fd < 0) {
+ log_close(log);
+ return -1;
+ }
+
+ /* if new, initialize foo.gz with an empty log, delete old dictionary */
+ if (lseek(log->fd, 0, SEEK_END) == 0) {
+ if (write(log->fd, log_gzhead, HEAD) != HEAD ||
+ write(log->fd, log_gzext, EXTRA) != EXTRA ||
+ write(log->fd, log_gzbody, BODY) != BODY) {
+ log_close(log);
+ return -1;
+ }
+ strcpy(log->end, ".dict");
+ unlink(log->path);
+ }
+
+ /* verify log file and load extra field information */
+ if ((op = log_head(log)) < 0) {
+ log_close(log);
+ return -1;
+ }
+
+ /* check for interrupted process and if so, recover */
+ if (op != NO_OP && log_recover(log, op)) {
+ log_close(log);
+ return -1;
+ }
+
+ /* touch the lock file to prevent another process from grabbing it */
+ log_touch(log);
+ return 0;
+}
+
+/* See gzlog.h for the description of the external methods below */
+gzlog *gzlog_open(char *path)
+{
+ size_t n;
+ struct log *log;
+
+ /* check arguments */
+ if (path == NULL || *path == 0)
+ return NULL;
+
+ /* allocate and initialize log structure */
+ log = malloc(sizeof(struct log));
+ if (log == NULL)
+ return NULL;
+ strcpy(log->id, LOGID);
+ log->fd = -1;
+
+ /* save path and end of path for name construction */
+ n = strlen(path);
+ log->path = malloc(n + 9); /* allow for ".repairs" */
+ if (log->path == NULL) {
+ free(log);
+ return NULL;
+ }
+ strcpy(log->path, path);
+ log->end = log->path + n;
+
+ /* gain exclusive access and verify log file -- may perform a
+ recovery operation if needed */
+ if (log_open(log)) {
+ free(log->path);
+ free(log);
+ return NULL;
+ }
+
+ /* return pointer to log structure */
+ return log;
+}
+
+/* gzlog_compress() return values:
+ 0: all good
+ -1: file i/o error (usually access issue)
+ -2: memory allocation failure
+ -3: invalid log pointer argument */
+int gzlog_compress(gzlog *logd)
+{
+ int fd, ret;
+ uint block;
+ size_t len, next;
+ unsigned char *data, buf[5];
+ struct log *log = logd;
+
+ /* check arguments */
+ if (log == NULL || strcmp(log->id, LOGID))
+ return -3;
+
+ /* see if we lost the lock -- if so get it again and reload the extra
+ field information (it probably changed), recover last operation if
+ necessary */
+ if (log_check(log) && log_open(log))
+ return -1;
+
+ /* create space for uncompressed data */
+ len = ((size_t)(log->last - log->first) & ~(((size_t)1 << 10) - 1)) +
+ log->stored;
+ if ((data = malloc(len)) == NULL)
+ return -2;
+
+ /* do statement here is just a cheap trick for error handling */
+ do {
+ /* read in the uncompressed data */
+ if (lseek(log->fd, log->first - 1, SEEK_SET) < 0)
+ break;
+ next = 0;
+ while (next < len) {
+ if (read(log->fd, buf, 5) != 5)
+ break;
+ block = PULL2(buf + 1);
+ if (next + block > len ||
+ read(log->fd, (char *)data + next, block) != block)
+ break;
+ next += block;
+ }
+ if (lseek(log->fd, 0, SEEK_CUR) != log->last + 4 + log->stored)
+ break;
+ log_touch(log);
+
+ /* write the uncompressed data to the .add file */
+ strcpy(log->end, ".add");
+ fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd < 0)
+ break;
+ ret = (size_t)write(fd, data, len) != len;
+ if (ret | close(fd))
+ break;
+ log_touch(log);
+
+ /* write the dictionary for the next compress to the .temp file */
+ strcpy(log->end, ".temp");
+ fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd < 0)
+ break;
+ next = DICT > len ? len : DICT;
+ ret = (size_t)write(fd, (char *)data + len - next, next) != next;
+ if (ret | close(fd))
+ break;
+ log_touch(log);
+
+ /* roll back to compressed data, mark the compress in progress */
+ log->last = log->first;
+ log->stored = 0;
+ if (log_mark(log, COMPRESS_OP))
+ break;
+ BAIL(7);
+
+ /* compress and append the data (clears mark) */
+ ret = log_compress(log, data, len);
+ free(data);
+ return ret;
+ } while (0);
+
+ /* broke out of do above on i/o error */
+ free(data);
+ return -1;
+}
+
+/* gzlog_write() return values:
+ 0: all good
+ -1: file i/o error (usually access issue)
+ -2: memory allocation failure
+ -3: invalid log pointer argument */
+int gzlog_write(gzlog *logd, void *data, size_t len)
+{
+ int fd, ret;
+ struct log *log = logd;
+
+ /* check arguments */
+ if (log == NULL || strcmp(log->id, LOGID))
+ return -3;
+ if (data == NULL || len <= 0)
+ return 0;
+
+ /* see if we lost the lock -- if so get it again and reload the extra
+ field information (it probably changed), recover last operation if
+ necessary */
+ if (log_check(log) && log_open(log))
+ return -1;
+
+ /* create and write .add file */
+ strcpy(log->end, ".add");
+ fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd < 0)
+ return -1;
+ ret = (size_t)write(fd, data, len) != len;
+ if (ret | close(fd))
+ return -1;
+ log_touch(log);
+
+ /* mark log file with append in progress */
+ if (log_mark(log, APPEND_OP))
+ return -1;
+ BAIL(8);
+
+ /* append data (clears mark) */
+ if (log_append(log, data, len))
+ return -1;
+
+ /* check to see if it's time to compress -- if not, then done */
+ if (((log->last - log->first) >> 10) + (log->stored >> 10) < TRIGGER)
+ return 0;
+
+ /* time to compress */
+ return gzlog_compress(log);
+}
+
+/* gzlog_close() return values:
+ 0: ok
+ -3: invalid log pointer argument */
+int gzlog_close(gzlog *logd)
+{
+ struct log *log = logd;
+
+ /* check arguments */
+ if (log == NULL || strcmp(log->id, LOGID))
+ return -3;
+
+ /* close the log file and release the lock */
+ log_close(log);
+
+ /* free structure and return */
+ if (log->path != NULL)
+ free(log->path);
+ strcpy(log->id, "bad");
+ free(log);
+ return 0;
+}
--- /dev/null
+/* gzlog.h
+ Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved
+ version 2.2, 14 Aug 2012
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler@alumni.caltech.edu
+ */
+
+/* Version History:
+ 1.0 26 Nov 2004 First version
+ 2.0 25 Apr 2008 Complete redesign for recovery of interrupted operations
+ Interface changed slightly in that now path is a prefix
+ Compression now occurs as needed during gzlog_write()
+ gzlog_write() now always leaves the log file as valid gzip
+ 2.1 8 Jul 2012 Fix argument checks in gzlog_compress() and gzlog_write()
+ 2.2 14 Aug 2012 Clean up signed comparisons
+ */
+
+/*
+ The gzlog object allows writing short messages to a gzipped log file,
+ opening the log file locked for small bursts, and then closing it. The log
+ object works by appending stored (uncompressed) data to the gzip file until
+ 1 MB has been accumulated. At that time, the stored data is compressed, and
+ replaces the uncompressed data in the file. The log file is truncated to
+ its new size at that time. After each write operation, the log file is a
+ valid gzip file that can decompressed to recover what was written.
+
+ The gzlog operations can be interupted at any point due to an application or
+ system crash, and the log file will be recovered the next time the log is
+ opened with gzlog_open().
+ */
+
+#ifndef GZLOG_H
+#define GZLOG_H
+
+/* gzlog object type */
+typedef void gzlog;
+
+/* Open a gzlog object, creating the log file if it does not exist. Return
+ NULL on error. Note that gzlog_open() could take a while to complete if it
+ has to wait to verify that a lock is stale (possibly for five minutes), or
+ if there is significant contention with other instantiations of this object
+ when locking the resource. path is the prefix of the file names created by
+ this object. If path is "foo", then the log file will be "foo.gz", and
+ other auxiliary files will be created and destroyed during the process:
+ "foo.dict" for a compression dictionary, "foo.temp" for a temporary (next)
+ dictionary, "foo.add" for data being added or compressed, "foo.lock" for the
+ lock file, and "foo.repairs" to log recovery operations performed due to
+ interrupted gzlog operations. A gzlog_open() followed by a gzlog_close()
+ will recover a previously interrupted operation, if any. */
+gzlog *gzlog_open(char *path);
+
+/* Write to a gzlog object. Return zero on success, -1 if there is a file i/o
+ error on any of the gzlog files (this should not happen if gzlog_open()
+ succeeded, unless the device has run out of space or leftover auxiliary
+ files have permissions or ownership that prevent their use), -2 if there is
+ a memory allocation failure, or -3 if the log argument is invalid (e.g. if
+ it was not created by gzlog_open()). This function will write data to the
+ file uncompressed, until 1 MB has been accumulated, at which time that data
+ will be compressed. The log file will be a valid gzip file upon successful
+ return. */
+int gzlog_write(gzlog *log, void *data, size_t len);
+
+/* Force compression of any uncompressed data in the log. This should be used
+ sparingly, if at all. The main application would be when a log file will
+ not be appended to again. If this is used to compress frequently while
+ appending, it will both significantly increase the execution time and
+ reduce the compression ratio. The return codes are the same as for
+ gzlog_write(). */
+int gzlog_compress(gzlog *log);
+
+/* Close a gzlog object. Return zero on success, -3 if the log argument is
+ invalid. The log object is freed, and so cannot be referenced again. */
+int gzlog_close(gzlog *log);
+
+#endif
--- /dev/null
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
+ "http://www.w3.org/TR/REC-html40/loose.dtd">
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<title>zlib Usage Example</title>
+<!-- Copyright (c) 2004, 2005 Mark Adler. -->
+</head>
+<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
+<h2 align="center"> zlib Usage Example </h2>
+We often get questions about how the <tt>deflate()</tt> and <tt>inflate()</tt> functions should be used.
+Users wonder when they should provide more input, when they should use more output,
+what to do with a <tt>Z_BUF_ERROR</tt>, how to make sure the process terminates properly, and
+so on. So for those who have read <tt>zlib.h</tt> (a few times), and
+would like further edification, below is an annotated example in C of simple routines to compress and decompress
+from an input file to an output file using <tt>deflate()</tt> and <tt>inflate()</tt> respectively. The
+annotations are interspersed between lines of the code. So please read between the lines.
+We hope this helps explain some of the intricacies of <em>zlib</em>.
+<p>
+Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
+<pre><b>
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+ Not copyrighted -- provided to the public domain
+ Version 1.4 11 December 2005 Mark Adler */
+
+/* Version history:
+ 1.0 30 Oct 2004 First version
+ 1.1 8 Nov 2004 Add void casting for unused return values
+ Use switch statement for inflate() return values
+ 1.2 9 Nov 2004 Add assertions to document zlib guarantees
+ 1.3 6 Apr 2005 Remove incorrect assertion in inf()
+ 1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions
+ Avoid some compiler warnings for input and output buffers
+ */
+</b></pre><!-- -->
+We now include the header files for the required definitions. From
+<tt>stdio.h</tt> we use <tt>fopen()</tt>, <tt>fread()</tt>, <tt>fwrite()</tt>,
+<tt>feof()</tt>, <tt>ferror()</tt>, and <tt>fclose()</tt> for file i/o, and
+<tt>fputs()</tt> for error messages. From <tt>string.h</tt> we use
+<tt>strcmp()</tt> for command line argument processing.
+From <tt>assert.h</tt> we use the <tt>assert()</tt> macro.
+From <tt>zlib.h</tt>
+we use the basic compression functions <tt>deflateInit()</tt>,
+<tt>deflate()</tt>, and <tt>deflateEnd()</tt>, and the basic decompression
+functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
+<tt>inflateEnd()</tt>.
+<pre><b>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+</b></pre><!-- -->
+This is an ugly hack required to avoid corruption of the input and output data on
+Windows/MS-DOS systems. Without this, those systems would assume that the input and output
+files are text, and try to convert the end-of-line characters from one standard to
+another. That would corrupt binary data, and in particular would render the compressed data unusable.
+This sets the input and output to binary which suppresses the end-of-line conversions.
+<tt>SET_BINARY_MODE()</tt> will be used later on <tt>stdin</tt> and <tt>stdout</tt>, at the beginning of <tt>main()</tt>.
+<pre><b>
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+</b></pre><!-- -->
+<tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
+from the <em>zlib</em> routines. Larger buffer sizes would be more efficient,
+especially for <tt>inflate()</tt>. If the memory is available, buffers sizes
+on the order of 128K or 256K bytes should be used.
+<pre><b>
+#define CHUNK 16384
+</b></pre><!-- -->
+The <tt>def()</tt> routine compresses data from an input file to an output file. The output data
+will be in the <em>zlib</em> format, which is different from the <em>gzip</em> or <em>zip</em>
+formats. The <em>zlib</em> format has a very small header of only two bytes to identify it as
+a <em>zlib</em> stream and to provide decoding information, and a four-byte trailer with a fast
+check value to verify the integrity of the uncompressed data after decoding.
+<pre><b>
+/* Compress from file source to file dest until EOF on source.
+ def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_STREAM_ERROR if an invalid compression
+ level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+ version of the library linked do not match, or Z_ERRNO if there is
+ an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+</b></pre>
+Here are the local variables for <tt>def()</tt>. <tt>ret</tt> will be used for <em>zlib</em>
+return codes. <tt>flush</tt> will keep track of the current flushing state for <tt>deflate()</tt>,
+which is either no flushing, or flush to completion after the end of the input file is reached.
+<tt>have</tt> is the amount of data returned from <tt>deflate()</tt>. The <tt>strm</tt> structure
+is used to pass information to and from the <em>zlib</em> routines, and to maintain the
+<tt>deflate()</tt> state. <tt>in</tt> and <tt>out</tt> are the input and output buffers for
+<tt>deflate()</tt>.
+<pre><b>
+ int ret, flush;
+ unsigned have;
+ z_stream strm;
+ unsigned char in[CHUNK];
+ unsigned char out[CHUNK];
+</b></pre><!-- -->
+The first thing we do is to initialize the <em>zlib</em> state for compression using
+<tt>deflateInit()</tt>. This must be done before the first use of <tt>deflate()</tt>.
+The <tt>zalloc</tt>, <tt>zfree</tt>, and <tt>opaque</tt> fields in the <tt>strm</tt>
+structure must be initialized before calling <tt>deflateInit()</tt>. Here they are
+set to the <em>zlib</em> constant <tt>Z_NULL</tt> to request that <em>zlib</em> use
+the default memory allocation routines. An application may also choose to provide
+custom memory allocation routines here. <tt>deflateInit()</tt> will allocate on the
+order of 256K bytes for the internal state.
+(See <a href="zlib_tech.html"><em>zlib Technical Details</em></a>.)
+<p>
+<tt>deflateInit()</tt> is called with a pointer to the structure to be initialized and
+the compression level, which is an integer in the range of -1 to 9. Lower compression
+levels result in faster execution, but less compression. Higher levels result in
+greater compression, but slower execution. The <em>zlib</em> constant Z_DEFAULT_COMPRESSION,
+equal to -1,
+provides a good compromise between compression and speed and is equivalent to level 6.
+Level 0 actually does no compression at all, and in fact expands the data slightly to produce
+the <em>zlib</em> format (it is not a byte-for-byte copy of the input).
+More advanced applications of <em>zlib</em>
+may use <tt>deflateInit2()</tt> here instead. Such an application may want to reduce how
+much memory will be used, at some price in compression. Or it may need to request a
+<em>gzip</em> header and trailer instead of a <em>zlib</em> header and trailer, or raw
+encoding with no header or trailer at all.
+<p>
+We must check the return value of <tt>deflateInit()</tt> against the <em>zlib</em> constant
+<tt>Z_OK</tt> to make sure that it was able to
+allocate memory for the internal state, and that the provided arguments were valid.
+<tt>deflateInit()</tt> will also check that the version of <em>zlib</em> that the <tt>zlib.h</tt>
+file came from matches the version of <em>zlib</em> actually linked with the program. This
+is especially important for environments in which <em>zlib</em> is a shared library.
+<p>
+Note that an application can initialize multiple, independent <em>zlib</em> streams, which can
+operate in parallel. The state information maintained in the structure allows the <em>zlib</em>
+routines to be reentrant.
+<pre><b>
+ /* allocate deflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = deflateInit(&strm, level);
+ if (ret != Z_OK)
+ return ret;
+</b></pre><!-- -->
+With the pleasantries out of the way, now we can get down to business. The outer <tt>do</tt>-loop
+reads all of the input file and exits at the bottom of the loop once end-of-file is reached.
+This loop contains the only call of <tt>deflate()</tt>. So we must make sure that all of the
+input data has been processed and that all of the output data has been generated and consumed
+before we fall out of the loop at the bottom.
+<pre><b>
+ /* compress until end of file */
+ do {
+</b></pre>
+We start off by reading data from the input file. The number of bytes read is put directly
+into <tt>avail_in</tt>, and a pointer to those bytes is put into <tt>next_in</tt>. We also
+check to see if end-of-file on the input has been reached. If we are at the end of file, then <tt>flush</tt> is set to the
+<em>zlib</em> constant <tt>Z_FINISH</tt>, which is later passed to <tt>deflate()</tt> to
+indicate that this is the last chunk of input data to compress. We need to use <tt>feof()</tt>
+to check for end-of-file as opposed to seeing if fewer than <tt>CHUNK</tt> bytes have been read. The
+reason is that if the input file length is an exact multiple of <tt>CHUNK</tt>, we will miss
+the fact that we got to the end-of-file, and not know to tell <tt>deflate()</tt> to finish
+up the compressed stream. If we are not yet at the end of the input, then the <em>zlib</em>
+constant <tt>Z_NO_FLUSH</tt> will be passed to <tt>deflate</tt> to indicate that we are still
+in the middle of the uncompressed data.
+<p>
+If there is an error in reading from the input file, the process is aborted with
+<tt>deflateEnd()</tt> being called to free the allocated <em>zlib</em> state before returning
+the error. We wouldn't want a memory leak, now would we? <tt>deflateEnd()</tt> can be called
+at any time after the state has been initialized. Once that's done, <tt>deflateInit()</tt> (or
+<tt>deflateInit2()</tt>) would have to be called to start a new compression process. There is
+no point here in checking the <tt>deflateEnd()</tt> return code. The deallocation can't fail.
+<pre><b>
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+ strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop passes our chunk of input data to <tt>deflate()</tt>, and then
+keeps calling <tt>deflate()</tt> until it is done producing output. Once there is no more
+new output, <tt>deflate()</tt> is guaranteed to have consumed all of the input, i.e.,
+<tt>avail_in</tt> will be zero.
+<pre><b>
+ /* run deflate() on input until output buffer not full, finish
+ compression if all of source has been read in */
+ do {
+</b></pre>
+Output space is provided to <tt>deflate()</tt> by setting <tt>avail_out</tt> to the number
+of available output bytes and <tt>next_out</tt> to a pointer to that space.
+<pre><b>
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+</b></pre>
+Now we call the compression engine itself, <tt>deflate()</tt>. It takes as many of the
+<tt>avail_in</tt> bytes at <tt>next_in</tt> as it can process, and writes as many as
+<tt>avail_out</tt> bytes to <tt>next_out</tt>. Those counters and pointers are then
+updated past the input data consumed and the output data written. It is the amount of
+output space available that may limit how much input is consumed.
+Hence the inner loop to make sure that
+all of the input is consumed by providing more output space each time. Since <tt>avail_in</tt>
+and <tt>next_in</tt> are updated by <tt>deflate()</tt>, we don't have to mess with those
+between <tt>deflate()</tt> calls until it's all used up.
+<p>
+The parameters to <tt>deflate()</tt> are a pointer to the <tt>strm</tt> structure containing
+the input and output information and the internal compression engine state, and a parameter
+indicating whether and how to flush data to the output. Normally <tt>deflate</tt> will consume
+several K bytes of input data before producing any output (except for the header), in order
+to accumulate statistics on the data for optimum compression. It will then put out a burst of
+compressed data, and proceed to consume more input before the next burst. Eventually,
+<tt>deflate()</tt>
+must be told to terminate the stream, complete the compression with provided input data, and
+write out the trailer check value. <tt>deflate()</tt> will continue to compress normally as long
+as the flush parameter is <tt>Z_NO_FLUSH</tt>. Once the <tt>Z_FINISH</tt> parameter is provided,
+<tt>deflate()</tt> will begin to complete the compressed output stream. However depending on how
+much output space is provided, <tt>deflate()</tt> may have to be called several times until it
+has provided the complete compressed stream, even after it has consumed all of the input. The flush
+parameter must continue to be <tt>Z_FINISH</tt> for those subsequent calls.
+<p>
+There are other values of the flush parameter that are used in more advanced applications. You can
+force <tt>deflate()</tt> to produce a burst of output that encodes all of the input data provided
+so far, even if it wouldn't have otherwise, for example to control data latency on a link with
+compressed data. You can also ask that <tt>deflate()</tt> do that as well as erase any history up to
+that point so that what follows can be decompressed independently, for example for random access
+applications. Both requests will degrade compression by an amount depending on how often such
+requests are made.
+<p>
+<tt>deflate()</tt> has a return value that can indicate errors, yet we do not check it here. Why
+not? Well, it turns out that <tt>deflate()</tt> can do no wrong here. Let's go through
+<tt>deflate()</tt>'s return values and dispense with them one by one. The possible values are
+<tt>Z_OK</tt>, <tt>Z_STREAM_END</tt>, <tt>Z_STREAM_ERROR</tt>, or <tt>Z_BUF_ERROR</tt>. <tt>Z_OK</tt>
+is, well, ok. <tt>Z_STREAM_END</tt> is also ok and will be returned for the last call of
+<tt>deflate()</tt>. This is already guaranteed by calling <tt>deflate()</tt> with <tt>Z_FINISH</tt>
+until it has no more output. <tt>Z_STREAM_ERROR</tt> is only possible if the stream is not
+initialized properly, but we did initialize it properly. There is no harm in checking for
+<tt>Z_STREAM_ERROR</tt> here, for example to check for the possibility that some
+other part of the application inadvertently clobbered the memory containing the <em>zlib</em> state.
+<tt>Z_BUF_ERROR</tt> will be explained further below, but
+suffice it to say that this is simply an indication that <tt>deflate()</tt> could not consume
+more input or produce more output. <tt>deflate()</tt> can be called again with more output space
+or more available input, which it will be in this code.
+<pre><b>
+ ret = deflate(&strm, flush); /* no bad return value */
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+</b></pre>
+Now we compute how much output <tt>deflate()</tt> provided on the last call, which is the
+difference between how much space was provided before the call, and how much output space
+is still available after the call. Then that data, if any, is written to the output file.
+We can then reuse the output buffer for the next call of <tt>deflate()</tt>. Again if there
+is a file i/o error, we call <tt>deflateEnd()</tt> before returning to avoid a memory leak.
+<pre><b>
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+</b></pre>
+The inner <tt>do</tt>-loop is repeated until the last <tt>deflate()</tt> call fails to fill the
+provided output buffer. Then we know that <tt>deflate()</tt> has done as much as it can with
+the provided input, and that all of that input has been consumed. We can then fall out of this
+loop and reuse the input buffer.
+<p>
+The way we tell that <tt>deflate()</tt> has no more output is by seeing that it did not fill
+the output buffer, leaving <tt>avail_out</tt> greater than zero. However suppose that
+<tt>deflate()</tt> has no more output, but just so happened to exactly fill the output buffer!
+<tt>avail_out</tt> is zero, and we can't tell that <tt>deflate()</tt> has done all it can.
+As far as we know, <tt>deflate()</tt>
+has more output for us. So we call it again. But now <tt>deflate()</tt> produces no output
+at all, and <tt>avail_out</tt> remains unchanged as <tt>CHUNK</tt>. That <tt>deflate()</tt> call
+wasn't able to do anything, either consume input or produce output, and so it returns
+<tt>Z_BUF_ERROR</tt>. (See, I told you I'd cover this later.) However this is not a problem at
+all. Now we finally have the desired indication that <tt>deflate()</tt> is really done,
+and so we drop out of the inner loop to provide more input to <tt>deflate()</tt>.
+<p>
+With <tt>flush</tt> set to <tt>Z_FINISH</tt>, this final set of <tt>deflate()</tt> calls will
+complete the output stream. Once that is done, subsequent calls of <tt>deflate()</tt> would return
+<tt>Z_STREAM_ERROR</tt> if the flush parameter is not <tt>Z_FINISH</tt>, and do no more processing
+until the state is reinitialized.
+<p>
+Some applications of <em>zlib</em> have two loops that call <tt>deflate()</tt>
+instead of the single inner loop we have here. The first loop would call
+without flushing and feed all of the data to <tt>deflate()</tt>. The second loop would call
+<tt>deflate()</tt> with no more
+data and the <tt>Z_FINISH</tt> parameter to complete the process. As you can see from this
+example, that can be avoided by simply keeping track of the current flush state.
+<pre><b>
+ } while (strm.avail_out == 0);
+ assert(strm.avail_in == 0); /* all input will be used */
+</b></pre><!-- -->
+Now we check to see if we have already processed all of the input file. That information was
+saved in the <tt>flush</tt> variable, so we see if that was set to <tt>Z_FINISH</tt>. If so,
+then we're done and we fall out of the outer loop. We're guaranteed to get <tt>Z_STREAM_END</tt>
+from the last <tt>deflate()</tt> call, since we ran it until the last chunk of input was
+consumed and all of the output was generated.
+<pre><b>
+ /* done when last data in file processed */
+ } while (flush != Z_FINISH);
+ assert(ret == Z_STREAM_END); /* stream will be complete */
+</b></pre><!-- -->
+The process is complete, but we still need to deallocate the state to avoid a memory leak
+(or rather more like a memory hemorrhage if you didn't do this). Then
+finally we can return with a happy return value.
+<pre><b>
+ /* clean up and return */
+ (void)deflateEnd(&strm);
+ return Z_OK;
+}
+</b></pre><!-- -->
+Now we do the same thing for decompression in the <tt>inf()</tt> routine. <tt>inf()</tt>
+decompresses what is hopefully a valid <em>zlib</em> stream from the input file and writes the
+uncompressed data to the output file. Much of the discussion above for <tt>def()</tt>
+applies to <tt>inf()</tt> as well, so the discussion here will focus on the differences between
+the two.
+<pre><b>
+/* Decompress from file source to file dest until stream ends or EOF.
+ inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_DATA_ERROR if the deflate data is
+ invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+ the version of the library linked do not match, or Z_ERRNO if there
+ is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+</b></pre>
+The local variables have the same functionality as they do for <tt>def()</tt>. The
+only difference is that there is no <tt>flush</tt> variable, since <tt>inflate()</tt>
+can tell from the <em>zlib</em> stream itself when the stream is complete.
+<pre><b>
+ int ret;
+ unsigned have;
+ z_stream strm;
+ unsigned char in[CHUNK];
+ unsigned char out[CHUNK];
+</b></pre><!-- -->
+The initialization of the state is the same, except that there is no compression level,
+of course, and two more elements of the structure are initialized. <tt>avail_in</tt>
+and <tt>next_in</tt> must be initialized before calling <tt>inflateInit()</tt>. This
+is because the application has the option to provide the start of the zlib stream in
+order for <tt>inflateInit()</tt> to have access to information about the compression
+method to aid in memory allocation. In the current implementation of <em>zlib</em>
+(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of
+<tt>inflate()</tt> anyway. However those fields must be initialized since later versions
+of <em>zlib</em> that provide more compression methods may take advantage of this interface.
+In any case, no decompression is performed by <tt>inflateInit()</tt>, so the
+<tt>avail_out</tt> and <tt>next_out</tt> fields do not need to be initialized before calling.
+<p>
+Here <tt>avail_in</tt> is set to zero and <tt>next_in</tt> is set to <tt>Z_NULL</tt> to
+indicate that no input data is being provided.
+<pre><b>
+ /* allocate inflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm);
+ if (ret != Z_OK)
+ return ret;
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop decompresses input until <tt>inflate()</tt> indicates
+that it has reached the end of the compressed data and has produced all of the uncompressed
+output. This is in contrast to <tt>def()</tt> which processes all of the input file.
+If end-of-file is reached before the compressed data self-terminates, then the compressed
+data is incomplete and an error is returned.
+<pre><b>
+ /* decompress until deflate stream ends or end of file */
+ do {
+</b></pre>
+We read input data and set the <tt>strm</tt> structure accordingly. If we've reached the
+end of the input file, then we leave the outer loop and report an error, since the
+compressed data is incomplete. Note that we may read more data than is eventually consumed
+by <tt>inflate()</tt>, if the input file continues past the <em>zlib</em> stream.
+For applications where <em>zlib</em> streams are embedded in other data, this routine would
+need to be modified to return the unused data, or at least indicate how much of the input
+data was not used, so the application would know where to pick up after the <em>zlib</em> stream.
+<pre><b>
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ if (strm.avail_in == 0)
+ break;
+ strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop has the same function it did in <tt>def()</tt>, which is to
+keep calling <tt>inflate()</tt> until has generated all of the output it can with the
+provided input.
+<pre><b>
+ /* run inflate() on input until output buffer not full */
+ do {
+</b></pre>
+Just like in <tt>def()</tt>, the same output space is provided for each call of <tt>inflate()</tt>.
+<pre><b>
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+</b></pre>
+Now we run the decompression engine itself. There is no need to adjust the flush parameter, since
+the <em>zlib</em> format is self-terminating. The main difference here is that there are
+return values that we need to pay attention to. <tt>Z_DATA_ERROR</tt>
+indicates that <tt>inflate()</tt> detected an error in the <em>zlib</em> compressed data format,
+which means that either the data is not a <em>zlib</em> stream to begin with, or that the data was
+corrupted somewhere along the way since it was compressed. The other error to be processed is
+<tt>Z_MEM_ERROR</tt>, which can occur since memory allocation is deferred until <tt>inflate()</tt>
+needs it, unlike <tt>deflate()</tt>, whose memory is allocated at the start by <tt>deflateInit()</tt>.
+<p>
+Advanced applications may use
+<tt>deflateSetDictionary()</tt> to prime <tt>deflate()</tt> with a set of likely data to improve the
+first 32K or so of compression. This is noted in the <em>zlib</em> header, so <tt>inflate()</tt>
+requests that that dictionary be provided before it can start to decompress. Without the dictionary,
+correct decompression is not possible. For this routine, we have no idea what the dictionary is,
+so the <tt>Z_NEED_DICT</tt> indication is converted to a <tt>Z_DATA_ERROR</tt>.
+<p>
+<tt>inflate()</tt> can also return <tt>Z_STREAM_ERROR</tt>, which should not be possible here,
+but could be checked for as noted above for <tt>def()</tt>. <tt>Z_BUF_ERROR</tt> does not need to be
+checked for here, for the same reasons noted for <tt>def()</tt>. <tt>Z_STREAM_END</tt> will be
+checked for later.
+<pre><b>
+ ret = inflate(&strm, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR; /* and fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ (void)inflateEnd(&strm);
+ return ret;
+ }
+</b></pre>
+The output of <tt>inflate()</tt> is handled identically to that of <tt>deflate()</tt>.
+<pre><b>
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+</b></pre>
+The inner <tt>do</tt>-loop ends when <tt>inflate()</tt> has no more output as indicated
+by not filling the output buffer, just as for <tt>deflate()</tt>. In this case, we cannot
+assert that <tt>strm.avail_in</tt> will be zero, since the deflate stream may end before the file
+does.
+<pre><b>
+ } while (strm.avail_out == 0);
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop ends when <tt>inflate()</tt> reports that it has reached the
+end of the input <em>zlib</em> stream, has completed the decompression and integrity
+check, and has provided all of the output. This is indicated by the <tt>inflate()</tt>
+return value <tt>Z_STREAM_END</tt>. The inner loop is guaranteed to leave <tt>ret</tt>
+equal to <tt>Z_STREAM_END</tt> if the last chunk of the input file read contained the end
+of the <em>zlib</em> stream. So if the return value is not <tt>Z_STREAM_END</tt>, the
+loop continues to read more input.
+<pre><b>
+ /* done when inflate() says it's done */
+ } while (ret != Z_STREAM_END);
+</b></pre><!-- -->
+At this point, decompression successfully completed, or we broke out of the loop due to no
+more data being available from the input file. If the last <tt>inflate()</tt> return value
+is not <tt>Z_STREAM_END</tt>, then the <em>zlib</em> stream was incomplete and a data error
+is returned. Otherwise, we return with a happy return value. Of course, <tt>inflateEnd()</tt>
+is called first to avoid a memory leak.
+<pre><b>
+ /* clean up and return */
+ (void)inflateEnd(&strm);
+ return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+</b></pre><!-- -->
+That ends the routines that directly use <em>zlib</em>. The following routines make this
+a command-line program by running data through the above routines from <tt>stdin</tt> to
+<tt>stdout</tt>, and handling any errors reported by <tt>def()</tt> or <tt>inf()</tt>.
+<p>
+<tt>zerr()</tt> is used to interpret the possible error codes from <tt>def()</tt>
+and <tt>inf()</tt>, as detailed in their comments above, and print out an error message.
+Note that these are only a subset of the possible return values from <tt>deflate()</tt>
+and <tt>inflate()</tt>.
+<pre><b>
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+ fputs("zpipe: ", stderr);
+ switch (ret) {
+ case Z_ERRNO:
+ if (ferror(stdin))
+ fputs("error reading stdin\n", stderr);
+ if (ferror(stdout))
+ fputs("error writing stdout\n", stderr);
+ break;
+ case Z_STREAM_ERROR:
+ fputs("invalid compression level\n", stderr);
+ break;
+ case Z_DATA_ERROR:
+ fputs("invalid or incomplete deflate data\n", stderr);
+ break;
+ case Z_MEM_ERROR:
+ fputs("out of memory\n", stderr);
+ break;
+ case Z_VERSION_ERROR:
+ fputs("zlib version mismatch!\n", stderr);
+ }
+}
+</b></pre><!-- -->
+Here is the <tt>main()</tt> routine used to test <tt>def()</tt> and <tt>inf()</tt>. The
+<tt>zpipe</tt> command is simply a compression pipe from <tt>stdin</tt> to <tt>stdout</tt>, if
+no arguments are given, or it is a decompression pipe if <tt>zpipe -d</tt> is used. If any other
+arguments are provided, no compression or decompression is performed. Instead a usage
+message is displayed. Examples are <tt>zpipe < foo.txt > foo.txt.z</tt> to compress, and
+<tt>zpipe -d < foo.txt.z > foo.txt</tt> to decompress.
+<pre><b>
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+ int ret;
+
+ /* avoid end-of-line conversions */
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+
+ /* do compression if no arguments */
+ if (argc == 1) {
+ ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* do decompression if -d specified */
+ else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+ ret = inf(stdin, stdout);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* otherwise, report usage */
+ else {
+ fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+ return 1;
+ }
+}
+</b></pre>
+<hr>
+<i>Copyright (c) 2004, 2005 by Mark Adler<br>Last modified 11 December 2005</i>
+</body>
+</html>
--- /dev/null
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+ Not copyrighted -- provided to the public domain
+ Version 1.4 11 December 2005 Mark Adler */
+
+/* Version history:
+ 1.0 30 Oct 2004 First version
+ 1.1 8 Nov 2004 Add void casting for unused return values
+ Use switch statement for inflate() return values
+ 1.2 9 Nov 2004 Add assertions to document zlib guarantees
+ 1.3 6 Apr 2005 Remove incorrect assertion in inf()
+ 1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions
+ Avoid some compiler warnings for input and output buffers
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#define CHUNK 16384
+
+/* Compress from file source to file dest until EOF on source.
+ def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_STREAM_ERROR if an invalid compression
+ level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+ version of the library linked do not match, or Z_ERRNO if there is
+ an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+ int ret, flush;
+ unsigned have;
+ z_stream strm;
+ unsigned char in[CHUNK];
+ unsigned char out[CHUNK];
+
+ /* allocate deflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = deflateInit(&strm, level);
+ if (ret != Z_OK)
+ return ret;
+
+ /* compress until end of file */
+ do {
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+ strm.next_in = in;
+
+ /* run deflate() on input until output buffer not full, finish
+ compression if all of source has been read in */
+ do {
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+ ret = deflate(&strm, flush); /* no bad return value */
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ } while (strm.avail_out == 0);
+ assert(strm.avail_in == 0); /* all input will be used */
+
+ /* done when last data in file processed */
+ } while (flush != Z_FINISH);
+ assert(ret == Z_STREAM_END); /* stream will be complete */
+
+ /* clean up and return */
+ (void)deflateEnd(&strm);
+ return Z_OK;
+}
+
+/* Decompress from file source to file dest until stream ends or EOF.
+ inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_DATA_ERROR if the deflate data is
+ invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+ the version of the library linked do not match, or Z_ERRNO if there
+ is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+ int ret;
+ unsigned have;
+ z_stream strm;
+ unsigned char in[CHUNK];
+ unsigned char out[CHUNK];
+
+ /* allocate inflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm);
+ if (ret != Z_OK)
+ return ret;
+
+ /* decompress until deflate stream ends or end of file */
+ do {
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ if (strm.avail_in == 0)
+ break;
+ strm.next_in = in;
+
+ /* run inflate() on input until output buffer not full */
+ do {
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR; /* and fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ (void)inflateEnd(&strm);
+ return ret;
+ }
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ } while (strm.avail_out == 0);
+
+ /* done when inflate() says it's done */
+ } while (ret != Z_STREAM_END);
+
+ /* clean up and return */
+ (void)inflateEnd(&strm);
+ return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+ fputs("zpipe: ", stderr);
+ switch (ret) {
+ case Z_ERRNO:
+ if (ferror(stdin))
+ fputs("error reading stdin\n", stderr);
+ if (ferror(stdout))
+ fputs("error writing stdout\n", stderr);
+ break;
+ case Z_STREAM_ERROR:
+ fputs("invalid compression level\n", stderr);
+ break;
+ case Z_DATA_ERROR:
+ fputs("invalid or incomplete deflate data\n", stderr);
+ break;
+ case Z_MEM_ERROR:
+ fputs("out of memory\n", stderr);
+ break;
+ case Z_VERSION_ERROR:
+ fputs("zlib version mismatch!\n", stderr);
+ }
+}
+
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+ int ret;
+
+ /* avoid end-of-line conversions */
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+
+ /* do compression if no arguments */
+ if (argc == 1) {
+ ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* do decompression if -d specified */
+ else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+ ret = inf(stdin, stdout);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* otherwise, report usage */
+ else {
+ fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+ return 1;
+ }
+}
--- /dev/null
+/* zran.c -- example of zlib/gzip stream indexing and random access
+ * Copyright (C) 2005, 2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ Version 1.1 29 Sep 2012 Mark Adler */
+
+/* Version History:
+ 1.0 29 May 2005 First version
+ 1.1 29 Sep 2012 Fix memory reallocation error
+ */
+
+/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
+ for random access of a compressed file. A file containing a zlib or gzip
+ stream is provided on the command line. The compressed stream is decoded in
+ its entirety, and an index built with access points about every SPAN bytes
+ in the uncompressed output. The compressed file is left open, and can then
+ be read randomly, having to decompress on the average SPAN/2 uncompressed
+ bytes before getting to the desired block of data.
+
+ An access point can be created at the start of any deflate block, by saving
+ the starting file offset and bit of that block, and the 32K bytes of
+ uncompressed data that precede that block. Also the uncompressed offset of
+ that block is saved to provide a referece for locating a desired starting
+ point in the uncompressed stream. build_index() works by decompressing the
+ input zlib or gzip stream a block at a time, and at the end of each block
+ deciding if enough uncompressed data has gone by to justify the creation of
+ a new access point. If so, that point is saved in a data structure that
+ grows as needed to accommodate the points.
+
+ To use the index, an offset in the uncompressed data is provided, for which
+ the latest accees point at or preceding that offset is located in the index.
+ The input file is positioned to the specified location in the index, and if
+ necessary the first few bits of the compressed data is read from the file.
+ inflate is initialized with those bits and the 32K of uncompressed data, and
+ the decompression then proceeds until the desired offset in the file is
+ reached. Then the decompression continues to read the desired uncompressed
+ data from the file.
+
+ Another approach would be to generate the index on demand. In that case,
+ requests for random access reads from the compressed data would try to use
+ the index, but if a read far enough past the end of the index is required,
+ then further index entries would be generated and added.
+
+ There is some fair bit of overhead to starting inflation for the random
+ access, mainly copying the 32K byte dictionary. So if small pieces of the
+ file are being accessed, it would make sense to implement a cache to hold
+ some lookahead and avoid many calls to extract() for small lengths.
+
+ Another way to build an index would be to use inflateCopy(). That would
+ not be constrained to have access points at block boundaries, but requires
+ more memory per access point, and also cannot be saved to file due to the
+ use of pointers in the state. The approach here allows for storage of the
+ index in a file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+
+#define local static
+
+#define SPAN 1048576L /* desired distance between access points */
+#define WINSIZE 32768U /* sliding window size */
+#define CHUNK 16384 /* file input buffer size */
+
+/* access point entry */
+struct point {
+ off_t out; /* corresponding offset in uncompressed data */
+ off_t in; /* offset in input file of first full byte */
+ int bits; /* number of bits (1-7) from byte at in - 1, or 0 */
+ unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */
+};
+
+/* access point list */
+struct access {
+ int have; /* number of list entries filled in */
+ int size; /* number of list entries allocated */
+ struct point *list; /* allocated list */
+};
+
+/* Deallocate an index built by build_index() */
+local void free_index(struct access *index)
+{
+ if (index != NULL) {
+ free(index->list);
+ free(index);
+ }
+}
+
+/* Add an entry to the access point list. If out of memory, deallocate the
+ existing list and return NULL. */
+local struct access *addpoint(struct access *index, int bits,
+ off_t in, off_t out, unsigned left, unsigned char *window)
+{
+ struct point *next;
+
+ /* if list is empty, create it (start with eight points) */
+ if (index == NULL) {
+ index = malloc(sizeof(struct access));
+ if (index == NULL) return NULL;
+ index->list = malloc(sizeof(struct point) << 3);
+ if (index->list == NULL) {
+ free(index);
+ return NULL;
+ }
+ index->size = 8;
+ index->have = 0;
+ }
+
+ /* if list is full, make it bigger */
+ else if (index->have == index->size) {
+ index->size <<= 1;
+ next = realloc(index->list, sizeof(struct point) * index->size);
+ if (next == NULL) {
+ free_index(index);
+ return NULL;
+ }
+ index->list = next;
+ }
+
+ /* fill in entry and increment how many we have */
+ next = index->list + index->have;
+ next->bits = bits;
+ next->in = in;
+ next->out = out;
+ if (left)
+ memcpy(next->window, window + WINSIZE - left, left);
+ if (left < WINSIZE)
+ memcpy(next->window + left, window, WINSIZE - left);
+ index->have++;
+
+ /* return list, possibly reallocated */
+ return index;
+}
+
+/* Make one entire pass through the compressed stream and build an index, with
+ access points about every span bytes of uncompressed output -- span is
+ chosen to balance the speed of random access against the memory requirements
+ of the list, about 32K bytes per access point. Note that data after the end
+ of the first zlib or gzip stream in the file is ignored. build_index()
+ returns the number of access points on success (>= 1), Z_MEM_ERROR for out
+ of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
+ file read error. On success, *built points to the resulting index. */
+local int build_index(FILE *in, off_t span, struct access **built)
+{
+ int ret;
+ off_t totin, totout; /* our own total counters to avoid 4GB limit */
+ off_t last; /* totout value of last access point */
+ struct access *index; /* access points being generated */
+ z_stream strm;
+ unsigned char input[CHUNK];
+ unsigned char window[WINSIZE];
+
+ /* initialize inflate */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */
+ if (ret != Z_OK)
+ return ret;
+
+ /* inflate the input, maintain a sliding window, and build an index -- this
+ also validates the integrity of the compressed data using the check
+ information at the end of the gzip or zlib stream */
+ totin = totout = last = 0;
+ index = NULL; /* will be allocated by first addpoint() */
+ strm.avail_out = 0;
+ do {
+ /* get some compressed data from input file */
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto build_index_error;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto build_index_error;
+ }
+ strm.next_in = input;
+
+ /* process all of that, or until end of stream */
+ do {
+ /* reset sliding window if necessary */
+ if (strm.avail_out == 0) {
+ strm.avail_out = WINSIZE;
+ strm.next_out = window;
+ }
+
+ /* inflate until out of input, output, or at end of block --
+ update the total input and output counters */
+ totin += strm.avail_in;
+ totout += strm.avail_out;
+ ret = inflate(&strm, Z_BLOCK); /* return at end of block */
+ totin -= strm.avail_in;
+ totout -= strm.avail_out;
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto build_index_error;
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* if at end of block, consider adding an index entry (note that if
+ data_type indicates an end-of-block, then all of the
+ uncompressed data from that block has been delivered, and none
+ of the compressed data after that block has been consumed,
+ except for up to seven bits) -- the totout == 0 provides an
+ entry point after the zlib or gzip header, and assures that the
+ index always has at least one access point; we avoid creating an
+ access point after the last block by checking bit 6 of data_type
+ */
+ if ((strm.data_type & 128) && !(strm.data_type & 64) &&
+ (totout == 0 || totout - last > span)) {
+ index = addpoint(index, strm.data_type & 7, totin,
+ totout, strm.avail_out, window);
+ if (index == NULL) {
+ ret = Z_MEM_ERROR;
+ goto build_index_error;
+ }
+ last = totout;
+ }
+ } while (strm.avail_in != 0);
+ } while (ret != Z_STREAM_END);
+
+ /* clean up and return index (release unused entries in list) */
+ (void)inflateEnd(&strm);
+ index->list = realloc(index->list, sizeof(struct point) * index->have);
+ index->size = index->have;
+ *built = index;
+ return index->size;
+
+ /* return error */
+ build_index_error:
+ (void)inflateEnd(&strm);
+ if (index != NULL)
+ free_index(index);
+ return ret;
+}
+
+/* Use the index to read len bytes from offset into buf, return bytes read or
+ negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
+ the end of the uncompressed data, then extract() will return a value less
+ than len, indicating how much as actually read into buf. This function
+ should not return a data error unless the file was modified since the index
+ was generated. extract() may also return Z_ERRNO if there is an error on
+ reading or seeking the input file. */
+local int extract(FILE *in, struct access *index, off_t offset,
+ unsigned char *buf, int len)
+{
+ int ret, skip;
+ z_stream strm;
+ struct point *here;
+ unsigned char input[CHUNK];
+ unsigned char discard[WINSIZE];
+
+ /* proceed only if something reasonable to do */
+ if (len < 0)
+ return 0;
+
+ /* find where in stream to start */
+ here = index->list;
+ ret = index->have;
+ while (--ret && here[1].out <= offset)
+ here++;
+
+ /* initialize file and inflate state to start there */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -15); /* raw inflate */
+ if (ret != Z_OK)
+ return ret;
+ ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
+ if (ret == -1)
+ goto extract_ret;
+ if (here->bits) {
+ ret = getc(in);
+ if (ret == -1) {
+ ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
+ }
+ (void)inflateSetDictionary(&strm, here->window, WINSIZE);
+
+ /* skip uncompressed bytes until offset reached, then satisfy request */
+ offset -= here->out;
+ strm.avail_in = 0;
+ skip = 1; /* while skipping to offset */
+ do {
+ /* define where to put uncompressed data, and how much */
+ if (offset == 0 && skip) { /* at offset now */
+ strm.avail_out = len;
+ strm.next_out = buf;
+ skip = 0; /* only do this once */
+ }
+ if (offset > WINSIZE) { /* skip WINSIZE bytes */
+ strm.avail_out = WINSIZE;
+ strm.next_out = discard;
+ offset -= WINSIZE;
+ }
+ else if (offset != 0) { /* last skip */
+ strm.avail_out = (unsigned)offset;
+ strm.next_out = discard;
+ offset = 0;
+ }
+
+ /* uncompress until avail_out filled, or end of stream */
+ do {
+ if (strm.avail_in == 0) {
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto extract_ret;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ strm.next_in = input;
+ }
+ ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto extract_ret;
+ if (ret == Z_STREAM_END)
+ break;
+ } while (strm.avail_out != 0);
+
+ /* if reach end of stream, then don't keep trying to get more */
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* do until offset reached and requested data read, or stream ends */
+ } while (skip);
+
+ /* compute number of uncompressed bytes read after offset */
+ ret = skip ? 0 : len - strm.avail_out;
+
+ /* clean up and return bytes read or error */
+ extract_ret:
+ (void)inflateEnd(&strm);
+ return ret;
+}
+
+/* Demonstrate the use of build_index() and extract() by processing the file
+ provided on the command line, and the extracting 16K from about 2/3rds of
+ the way through the uncompressed output, and writing that to stdout. */
+int main(int argc, char **argv)
+{
+ int len;
+ off_t offset;
+ FILE *in;
+ struct access *index = NULL;
+ unsigned char buf[CHUNK];
+
+ /* open input file */
+ if (argc != 2) {
+ fprintf(stderr, "usage: zran file.gz\n");
+ return 1;
+ }
+ in = fopen(argv[1], "rb");
+ if (in == NULL) {
+ fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
+ return 1;
+ }
+
+ /* build index */
+ len = build_index(in, SPAN, &index);
+ if (len < 0) {
+ fclose(in);
+ switch (len) {
+ case Z_MEM_ERROR:
+ fprintf(stderr, "zran: out of memory\n");
+ break;
+ case Z_DATA_ERROR:
+ fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
+ break;
+ case Z_ERRNO:
+ fprintf(stderr, "zran: read error on %s\n", argv[1]);
+ break;
+ default:
+ fprintf(stderr, "zran: error %d while building index\n", len);
+ }
+ return 1;
+ }
+ fprintf(stderr, "zran: built index with %d access points\n", len);
+
+ /* use index by reading some bytes from an arbitrary offset */
+ offset = (index->list[index->have - 1].out << 1) / 3;
+ len = extract(in, index, offset, buf, CHUNK);
+ if (len < 0)
+ fprintf(stderr, "zran: extraction failed: %s error\n",
+ len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
+ else {
+ fwrite(buf, 1, len, stdout);
+ fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
+ }
+
+ /* clean up and exit */
+ free_index(index);
+ fclose(in);
+ return 0;
+}
--- /dev/null
+/* gzclose.c -- zlib gzclose() function
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* gzclose() is in a separate file so that it is linked in only if it is used.
+ That way the other gzclose functions can be used instead to avoid linking in
+ unneeded compression or decompression routines. */
+int ZEXPORT gzclose(file)
+ gzFile file;
+{
+#ifndef NO_GZCOMPRESS
+ gz_statep state;
+
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
+#else
+ return gzclose_r(file);
+#endif
+}
--- /dev/null
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+# ifndef _LARGEFILE_SOURCE
+# define _LARGEFILE_SOURCE 1
+# endif
+# ifdef _FILE_OFFSET_BITS
+# undef _FILE_OFFSET_BITS
+# endif
+#endif
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+# include <limits.h>
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+# include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+# include <io.h>
+#endif
+
+#ifdef WINAPI_FAMILY
+# define open _open
+# define read _read
+# define write _write
+# define close _close
+#endif
+
+#ifdef NO_DEFLATE /* for compatibility with old definition */
+# define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#if defined(__CYGWIN__)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+# ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+ but for now we just assume it doesn't. */
+# define NO_vsnprintf
+# endif
+# ifdef __TURBOC__
+# define NO_vsnprintf
+# endif
+# ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+# if !defined(vsnprintf) && !defined(NO_vsnprintf)
+# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+# define vsnprintf _vsnprintf
+# endif
+# endif
+# endif
+# ifdef __SASC
+# define NO_vsnprintf
+# endif
+# ifdef VMS
+# define NO_vsnprintf
+# endif
+# ifdef __OS400__
+# define NO_vsnprintf
+# endif
+# ifdef __MVS__
+# define NO_vsnprintf
+# endif
+#endif
+
+/* unlike snprintf (which is required in C99, yet still not supported by
+ Microsoft more than a decade later!), _snprintf does not guarantee null
+ termination of the result -- however this is only used in gzlib.c where
+ the result is assured to fit in the space provided */
+#ifdef _MSC_VER
+# define snprintf _snprintf
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+ extern voidp malloc OF((uInt size));
+ extern void free OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+# include <windows.h>
+# define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+# ifndef NO_STRERROR
+# include <errno.h>
+# define zstrerror() strerror(errno)
+# else
+# define zstrerror() "stdio error (consult errno)"
+# endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+ twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0 /* look for a gzip header */
+#define COPY 1 /* copy input directly */
+#define GZIP 2 /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+ /* exposed contents for gzgetc() macro */
+ struct gzFile_s x; /* "x" for exposed */
+ /* x.have: number of bytes available at x.next */
+ /* x.next: next output data to deliver or write */
+ /* x.pos: current position in uncompressed data */
+ /* used for both reading and writing */
+ int mode; /* see gzip modes above */
+ int fd; /* file descriptor */
+ char *path; /* path or fd for error messages */
+ unsigned size; /* buffer size, zero if not allocated yet */
+ unsigned want; /* requested buffer size, default is GZBUFSIZE */
+ unsigned char *in; /* input buffer */
+ unsigned char *out; /* output buffer (double-sized when reading) */
+ int direct; /* 0 if processing gzip, 1 if transparent */
+ /* just for reading */
+ int how; /* 0: get header, 1: copy, 2: decompress */
+ z_off64_t start; /* where the gzip data started, for rewinding */
+ int eof; /* true if end of input file reached */
+ int past; /* true if read requested past end */
+ /* just for writing */
+ int level; /* compression level */
+ int strategy; /* compression strategy */
+ /* seek request */
+ z_off64_t skip; /* amount to skip (already rewound if backwards) */
+ int seek; /* true if seek request pending */
+ /* error information */
+ int err; /* error code */
+ char *msg; /* error message */
+ /* zlib inflate or deflate stream */
+ z_stream strm; /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+ value -- needed when comparing unsigned to z_off64_t, which is signed
+ (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
--- /dev/null
+/* gzlib.c -- zlib functions common to reading and writing gzip files
+ * Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+#if defined(_WIN32) && !defined(__BORLANDC__)
+# define LSEEK _lseeki64
+#else
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+# define LSEEK lseek64
+#else
+# define LSEEK lseek
+#endif
+#endif
+
+/* Local functions */
+local void gz_reset OF((gz_statep));
+local gzFile gz_open OF((const void *, int, const char *));
+
+#if defined UNDER_CE
+
+/* Map the Windows error number in ERROR to a locale-dependent error message
+ string and return a pointer to it. Typically, the values for ERROR come
+ from GetLastError.
+
+ The string pointed to shall not be modified by the application, but may be
+ overwritten by a subsequent call to gz_strwinerror
+
+ The gz_strwinerror function does not change the current setting of
+ GetLastError. */
+char ZLIB_INTERNAL *gz_strwinerror (error)
+ DWORD error;
+{
+ static char buf[1024];
+
+ wchar_t *msgbuf;
+ DWORD lasterr = GetLastError();
+ DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+ | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+ NULL,
+ error,
+ 0, /* Default language */
+ (LPVOID)&msgbuf,
+ 0,
+ NULL);
+ if (chars != 0) {
+ /* If there is an \r\n appended, zap it. */
+ if (chars >= 2
+ && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+ chars -= 2;
+ msgbuf[chars] = 0;
+ }
+
+ if (chars > sizeof (buf) - 1) {
+ chars = sizeof (buf) - 1;
+ msgbuf[chars] = 0;
+ }
+
+ wcstombs(buf, msgbuf, chars + 1);
+ LocalFree(msgbuf);
+ }
+ else {
+ sprintf(buf, "unknown win32 error (%ld)", error);
+ }
+
+ SetLastError(lasterr);
+ return buf;
+}
+
+#endif /* UNDER_CE */
+
+/* Reset gzip file state */
+local void gz_reset(state)
+ gz_statep state;
+{
+ state->x.have = 0; /* no output data available */
+ if (state->mode == GZ_READ) { /* for reading ... */
+ state->eof = 0; /* not at end of file */
+ state->past = 0; /* have not read past end yet */
+ state->how = LOOK; /* look for gzip header */
+ }
+ state->seek = 0; /* no seek request pending */
+ gz_error(state, Z_OK, NULL); /* clear error */
+ state->x.pos = 0; /* no uncompressed data yet */
+ state->strm.avail_in = 0; /* no input data yet */
+}
+
+/* Open a gzip file either by name or file descriptor. */
+local gzFile gz_open(path, fd, mode)
+ const void *path;
+ int fd;
+ const char *mode;
+{
+ gz_statep state;
+ size_t len;
+ int oflag;
+#ifdef O_CLOEXEC
+ int cloexec = 0;
+#endif
+#ifdef O_EXCL
+ int exclusive = 0;
+#endif
+
+ /* check input */
+ if (path == NULL)
+ return NULL;
+
+ /* allocate gzFile structure to return */
+ state = (gz_statep)malloc(sizeof(gz_state));
+ if (state == NULL)
+ return NULL;
+ state->size = 0; /* no buffers allocated yet */
+ state->want = GZBUFSIZE; /* requested buffer size */
+ state->msg = NULL; /* no error message yet */
+
+ /* interpret mode */
+ state->mode = GZ_NONE;
+ state->level = Z_DEFAULT_COMPRESSION;
+ state->strategy = Z_DEFAULT_STRATEGY;
+ state->direct = 0;
+ while (*mode) {
+ if (*mode >= '0' && *mode <= '9')
+ state->level = *mode - '0';
+ else
+ switch (*mode) {
+ case 'r':
+ state->mode = GZ_READ;
+ break;
+#ifndef NO_GZCOMPRESS
+ case 'w':
+ state->mode = GZ_WRITE;
+ break;
+ case 'a':
+ state->mode = GZ_APPEND;
+ break;
+#endif
+ case '+': /* can't read and write at the same time */
+ free(state);
+ return NULL;
+ case 'b': /* ignore -- will request binary anyway */
+ break;
+#ifdef O_CLOEXEC
+ case 'e':
+ cloexec = 1;
+ break;
+#endif
+#ifdef O_EXCL
+ case 'x':
+ exclusive = 1;
+ break;
+#endif
+ case 'f':
+ state->strategy = Z_FILTERED;
+ break;
+ case 'h':
+ state->strategy = Z_HUFFMAN_ONLY;
+ break;
+ case 'R':
+ state->strategy = Z_RLE;
+ break;
+ case 'F':
+ state->strategy = Z_FIXED;
+ break;
+ case 'T':
+ state->direct = 1;
+ break;
+ default: /* could consider as an error, but just ignore */
+ ;
+ }
+ mode++;
+ }
+
+ /* must provide an "r", "w", or "a" */
+ if (state->mode == GZ_NONE) {
+ free(state);
+ return NULL;
+ }
+
+ /* can't force transparent read */
+ if (state->mode == GZ_READ) {
+ if (state->direct) {
+ free(state);
+ return NULL;
+ }
+ state->direct = 1; /* for empty file */
+ }
+
+ /* save the path name for error messages */
+#ifdef _WIN32
+ if (fd == -2) {
+ len = wcstombs(NULL, path, 0);
+ if (len == (size_t)-1)
+ len = 0;
+ }
+ else
+#endif
+ len = strlen((const char *)path);
+ state->path = (char *)malloc(len + 1);
+ if (state->path == NULL) {
+ free(state);
+ return NULL;
+ }
+#ifdef _WIN32
+ if (fd == -2)
+ if (len)
+ wcstombs(state->path, path, len + 1);
+ else
+ *(state->path) = 0;
+ else
+#endif
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(state->path, len + 1, "%s", (const char *)path);
+#else
+ strcpy(state->path, path);
+#endif
+
+ /* compute the flags for open() */
+ oflag =
+#ifdef O_LARGEFILE
+ O_LARGEFILE |
+#endif
+#ifdef O_BINARY
+ O_BINARY |
+#endif
+#ifdef O_CLOEXEC
+ (cloexec ? O_CLOEXEC : 0) |
+#endif
+ (state->mode == GZ_READ ?
+ O_RDONLY :
+ (O_WRONLY | O_CREAT |
+#ifdef O_EXCL
+ (exclusive ? O_EXCL : 0) |
+#endif
+ (state->mode == GZ_WRITE ?
+ O_TRUNC :
+ O_APPEND)));
+
+ /* open the file with the appropriate flags (or just use fd) */
+ state->fd = fd > -1 ? fd : (
+#ifdef _WIN32
+ fd == -2 ? _wopen(path, oflag, 0666) :
+#endif
+ open((const char *)path, oflag, 0666));
+ if (state->fd == -1) {
+ free(state->path);
+ free(state);
+ return NULL;
+ }
+ if (state->mode == GZ_APPEND)
+ state->mode = GZ_WRITE; /* simplify later checks */
+
+ /* save the current position for rewinding (only if reading) */
+ if (state->mode == GZ_READ) {
+ state->start = LSEEK(state->fd, 0, SEEK_CUR);
+ if (state->start == -1) state->start = 0;
+ }
+
+ /* initialize stream */
+ gz_reset(state);
+
+ /* return stream */
+ return (gzFile)state;
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen(path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen64(path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzdopen(fd, mode)
+ int fd;
+ const char *mode;
+{
+ char *path; /* identifier for error messages */
+ gzFile gz;
+
+ if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
+ return NULL;
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
+#else
+ sprintf(path, "<fd:%d>", fd); /* for debugging */
+#endif
+ gz = gz_open(path, fd, mode);
+ free(path);
+ return gz;
+}
+
+/* -- see zlib.h -- */
+#ifdef _WIN32
+gzFile ZEXPORT gzopen_w(path, mode)
+ const wchar_t *path;
+ const char *mode;
+{
+ return gz_open(path, -2, mode);
+}
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzbuffer(file, size)
+ gzFile file;
+ unsigned size;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* make sure we haven't already allocated memory */
+ if (state->size != 0)
+ return -1;
+
+ /* check and set requested size */
+ if (size < 2)
+ size = 2; /* need two bytes to check magic header */
+ state->want = size;
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzrewind(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no error */
+ if (state->mode != GZ_READ ||
+ (state->err != Z_OK && state->err != Z_BUF_ERROR))
+ return -1;
+
+ /* back up and start over */
+ if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
+ return -1;
+ gz_reset(state);
+ return 0;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzseek64(file, offset, whence)
+ gzFile file;
+ z_off64_t offset;
+ int whence;
+{
+ unsigned n;
+ z_off64_t ret;
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* check that there's no error */
+ if (state->err != Z_OK && state->err != Z_BUF_ERROR)
+ return -1;
+
+ /* can only seek from start or relative to current position */
+ if (whence != SEEK_SET && whence != SEEK_CUR)
+ return -1;
+
+ /* normalize offset to a SEEK_CUR specification */
+ if (whence == SEEK_SET)
+ offset -= state->x.pos;
+ else if (state->seek)
+ offset += state->skip;
+ state->seek = 0;
+
+ /* if within raw area while reading, just go there */
+ if (state->mode == GZ_READ && state->how == COPY &&
+ state->x.pos + offset >= 0) {
+ ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
+ if (ret == -1)
+ return -1;
+ state->x.have = 0;
+ state->eof = 0;
+ state->past = 0;
+ state->seek = 0;
+ gz_error(state, Z_OK, NULL);
+ state->strm.avail_in = 0;
+ state->x.pos += offset;
+ return state->x.pos;
+ }
+
+ /* calculate skip amount, rewinding if needed for back seek when reading */
+ if (offset < 0) {
+ if (state->mode != GZ_READ) /* writing -- can't go backwards */
+ return -1;
+ offset += state->x.pos;
+ if (offset < 0) /* before start of file! */
+ return -1;
+ if (gzrewind(file) == -1) /* rewind, then skip to offset */
+ return -1;
+ }
+
+ /* if reading, skip what's in output buffer (one less gzgetc() check) */
+ if (state->mode == GZ_READ) {
+ n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
+ (unsigned)offset : state->x.have;
+ state->x.have -= n;
+ state->x.next += n;
+ state->x.pos += n;
+ offset -= n;
+ }
+
+ /* request skip (if not zero) */
+ if (offset) {
+ state->seek = 1;
+ state->skip = offset;
+ }
+ return state->x.pos + offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzseek(file, offset, whence)
+ gzFile file;
+ z_off_t offset;
+ int whence;
+{
+ z_off64_t ret;
+
+ ret = gzseek64(file, (z_off64_t)offset, whence);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gztell64(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* return position */
+ return state->x.pos + (state->seek ? state->skip : 0);
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gztell(file)
+ gzFile file;
+{
+ z_off64_t ret;
+
+ ret = gztell64(file);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzoffset64(file)
+ gzFile file;
+{
+ z_off64_t offset;
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return -1;
+
+ /* compute and return effective offset in file */
+ offset = LSEEK(state->fd, 0, SEEK_CUR);
+ if (offset == -1)
+ return -1;
+ if (state->mode == GZ_READ) /* reading */
+ offset -= state->strm.avail_in; /* don't count buffered input */
+ return offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzoffset(file)
+ gzFile file;
+{
+ z_off64_t ret;
+
+ ret = gzoffset64(file);
+ return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzeof(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return 0;
+
+ /* return end-of-file state */
+ return state->mode == GZ_READ ? state->past : 0;
+}
+
+/* -- see zlib.h -- */
+const char * ZEXPORT gzerror(file, errnum)
+ gzFile file;
+ int *errnum;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return NULL;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return NULL;
+
+ /* return error information */
+ if (errnum != NULL)
+ *errnum = state->err;
+ return state->err == Z_MEM_ERROR ? "out of memory" :
+ (state->msg == NULL ? "" : state->msg);
+}
+
+/* -- see zlib.h -- */
+void ZEXPORT gzclearerr(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure and check integrity */
+ if (file == NULL)
+ return;
+ state = (gz_statep)file;
+ if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+ return;
+
+ /* clear error and end-of-file */
+ if (state->mode == GZ_READ) {
+ state->eof = 0;
+ state->past = 0;
+ }
+ gz_error(state, Z_OK, NULL);
+}
+
+/* Create an error message in allocated memory and set state->err and
+ state->msg accordingly. Free any previous error message already there. Do
+ not try to free or allocate space if the error is Z_MEM_ERROR (out of
+ memory). Simply save the error message as a static string. If there is an
+ allocation failure constructing the error message, then convert the error to
+ out of memory. */
+void ZLIB_INTERNAL gz_error(state, err, msg)
+ gz_statep state;
+ int err;
+ const char *msg;
+{
+ /* free previously allocated message and clear */
+ if (state->msg != NULL) {
+ if (state->err != Z_MEM_ERROR)
+ free(state->msg);
+ state->msg = NULL;
+ }
+
+ /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
+ if (err != Z_OK && err != Z_BUF_ERROR)
+ state->x.have = 0;
+
+ /* set error code, and if no message, then done */
+ state->err = err;
+ if (msg == NULL)
+ return;
+
+ /* for an out of memory error, return literal string when requested */
+ if (err == Z_MEM_ERROR)
+ return;
+
+ /* construct error message with path */
+ if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
+ NULL) {
+ state->err = Z_MEM_ERROR;
+ return;
+ }
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
+ "%s%s%s", state->path, ": ", msg);
+#else
+ strcpy(state->msg, state->path);
+ strcat(state->msg, ": ");
+ strcat(state->msg, msg);
+#endif
+ return;
+}
+
+#ifndef INT_MAX
+/* portably return maximum value for an int (when limits.h presumed not
+ available) -- we need to do this to cover cases where 2's complement not
+ used, since C standard permits 1's complement and sign-bit representations,
+ otherwise we could just use ((unsigned)-1) >> 1 */
+unsigned ZLIB_INTERNAL gz_intmax()
+{
+ unsigned p, q;
+
+ p = 1;
+ do {
+ q = p;
+ p <<= 1;
+ p++;
+ } while (p > q);
+ return q >> 1;
+}
+#endif
--- /dev/null
+/* gzread.c -- zlib functions for reading gzip files
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
+local int gz_avail OF((gz_statep));
+local int gz_look OF((gz_statep));
+local int gz_decomp OF((gz_statep));
+local int gz_fetch OF((gz_statep));
+local int gz_skip OF((gz_statep, z_off64_t));
+
+/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
+ state->fd, and update state->eof, state->err, and state->msg as appropriate.
+ This function needs to loop on read(), since read() is not guaranteed to
+ read the number of bytes requested, depending on the type of descriptor. */
+local int gz_load(state, buf, len, have)
+ gz_statep state;
+ unsigned char *buf;
+ unsigned len;
+ unsigned *have;
+{
+ int ret;
+
+ *have = 0;
+ do {
+ ret = read(state->fd, buf + *have, len - *have);
+ if (ret <= 0)
+ break;
+ *have += ret;
+ } while (*have < len);
+ if (ret < 0) {
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ if (ret == 0)
+ state->eof = 1;
+ return 0;
+}
+
+/* Load up input buffer and set eof flag if last data loaded -- return -1 on
+ error, 0 otherwise. Note that the eof flag is set when the end of the input
+ file is reached, even though there may be unused data in the buffer. Once
+ that data has been used, no more attempts will be made to read the file.
+ If strm->avail_in != 0, then the current data is moved to the beginning of
+ the input buffer, and then the remainder of the buffer is loaded with the
+ available data from the input file. */
+local int gz_avail(state)
+ gz_statep state;
+{
+ unsigned got;
+ z_streamp strm = &(state->strm);
+
+ if (state->err != Z_OK && state->err != Z_BUF_ERROR)
+ return -1;
+ if (state->eof == 0) {
+ if (strm->avail_in) { /* copy what's there to the start */
+ unsigned char *p = state->in;
+ unsigned const char *q = strm->next_in;
+ unsigned n = strm->avail_in;
+ do {
+ *p++ = *q++;
+ } while (--n);
+ }
+ if (gz_load(state, state->in + strm->avail_in,
+ state->size - strm->avail_in, &got) == -1)
+ return -1;
+ strm->avail_in += got;
+ strm->next_in = state->in;
+ }
+ return 0;
+}
+
+/* Look for gzip header, set up for inflate or copy. state->x.have must be 0.
+ If this is the first time in, allocate required memory. state->how will be
+ left unchanged if there is no more input data available, will be set to COPY
+ if there is no gzip header and direct copying will be performed, or it will
+ be set to GZIP for decompression. If direct copying, then leftover input
+ data from the input buffer will be copied to the output buffer. In that
+ case, all further file reads will be directly to either the output buffer or
+ a user buffer. If decompressing, the inflate state will be initialized.
+ gz_look() will return 0 on success or -1 on failure. */
+local int gz_look(state)
+ gz_statep state;
+{
+ z_streamp strm = &(state->strm);
+
+ /* allocate read buffers and inflate memory */
+ if (state->size == 0) {
+ /* allocate buffers */
+ state->in = (unsigned char *)malloc(state->want);
+ state->out = (unsigned char *)malloc(state->want << 1);
+ if (state->in == NULL || state->out == NULL) {
+ if (state->out != NULL)
+ free(state->out);
+ if (state->in != NULL)
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ state->size = state->want;
+
+ /* allocate inflate memory */
+ state->strm.zalloc = Z_NULL;
+ state->strm.zfree = Z_NULL;
+ state->strm.opaque = Z_NULL;
+ state->strm.avail_in = 0;
+ state->strm.next_in = Z_NULL;
+ if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */
+ free(state->out);
+ free(state->in);
+ state->size = 0;
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ }
+
+ /* get at least the magic bytes in the input buffer */
+ if (strm->avail_in < 2) {
+ if (gz_avail(state) == -1)
+ return -1;
+ if (strm->avail_in == 0)
+ return 0;
+ }
+
+ /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
+ a logical dilemma here when considering the case of a partially written
+ gzip file, to wit, if a single 31 byte is written, then we cannot tell
+ whether this is a single-byte file, or just a partially written gzip
+ file -- for here we assume that if a gzip file is being written, then
+ the header will be written in a single operation, so that reading a
+ single byte is sufficient indication that it is not a gzip file) */
+ if (strm->avail_in > 1 &&
+ strm->next_in[0] == 31 && strm->next_in[1] == 139) {
+ inflateReset(strm);
+ state->how = GZIP;
+ state->direct = 0;
+ return 0;
+ }
+
+ /* no gzip header -- if we were decoding gzip before, then this is trailing
+ garbage. Ignore the trailing garbage and finish. */
+ if (state->direct == 0) {
+ strm->avail_in = 0;
+ state->eof = 1;
+ state->x.have = 0;
+ return 0;
+ }
+
+ /* doing raw i/o, copy any leftover input to output -- this assumes that
+ the output buffer is larger than the input buffer, which also assures
+ space for gzungetc() */
+ state->x.next = state->out;
+ if (strm->avail_in) {
+ memcpy(state->x.next, strm->next_in, strm->avail_in);
+ state->x.have = strm->avail_in;
+ strm->avail_in = 0;
+ }
+ state->how = COPY;
+ state->direct = 1;
+ return 0;
+}
+
+/* Decompress from input to the provided next_out and avail_out in the state.
+ On return, state->x.have and state->x.next point to the just decompressed
+ data. If the gzip stream completes, state->how is reset to LOOK to look for
+ the next gzip stream or raw data, once state->x.have is depleted. Returns 0
+ on success, -1 on failure. */
+local int gz_decomp(state)
+ gz_statep state;
+{
+ int ret = Z_OK;
+ unsigned had;
+ z_streamp strm = &(state->strm);
+
+ /* fill output buffer up to end of deflate stream */
+ had = strm->avail_out;
+ do {
+ /* get more input for inflate() */
+ if (strm->avail_in == 0 && gz_avail(state) == -1)
+ return -1;
+ if (strm->avail_in == 0) {
+ gz_error(state, Z_BUF_ERROR, "unexpected end of file");
+ break;
+ }
+
+ /* decompress and handle errors */
+ ret = inflate(strm, Z_NO_FLUSH);
+ if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
+ gz_error(state, Z_STREAM_ERROR,
+ "internal error: inflate stream corrupt");
+ return -1;
+ }
+ if (ret == Z_MEM_ERROR) {
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
+ gz_error(state, Z_DATA_ERROR,
+ strm->msg == NULL ? "compressed data error" : strm->msg);
+ return -1;
+ }
+ } while (strm->avail_out && ret != Z_STREAM_END);
+
+ /* update available output */
+ state->x.have = had - strm->avail_out;
+ state->x.next = strm->next_out - state->x.have;
+
+ /* if the gzip stream completed successfully, look for another */
+ if (ret == Z_STREAM_END)
+ state->how = LOOK;
+
+ /* good decompression */
+ return 0;
+}
+
+/* Fetch data and put it in the output buffer. Assumes state->x.have is 0.
+ Data is either copied from the input file or decompressed from the input
+ file depending on state->how. If state->how is LOOK, then a gzip header is
+ looked for to determine whether to copy or decompress. Returns -1 on error,
+ otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the
+ end of the input file has been reached and all data has been processed. */
+local int gz_fetch(state)
+ gz_statep state;
+{
+ z_streamp strm = &(state->strm);
+
+ do {
+ switch(state->how) {
+ case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */
+ if (gz_look(state) == -1)
+ return -1;
+ if (state->how == LOOK)
+ return 0;
+ break;
+ case COPY: /* -> COPY */
+ if (gz_load(state, state->out, state->size << 1, &(state->x.have))
+ == -1)
+ return -1;
+ state->x.next = state->out;
+ return 0;
+ case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */
+ strm->avail_out = state->size << 1;
+ strm->next_out = state->out;
+ if (gz_decomp(state) == -1)
+ return -1;
+ }
+ } while (state->x.have == 0 && (!state->eof || strm->avail_in));
+ return 0;
+}
+
+/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
+local int gz_skip(state, len)
+ gz_statep state;
+ z_off64_t len;
+{
+ unsigned n;
+
+ /* skip over len bytes or reach end-of-file, whichever comes first */
+ while (len)
+ /* skip over whatever is in output buffer */
+ if (state->x.have) {
+ n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
+ (unsigned)len : state->x.have;
+ state->x.have -= n;
+ state->x.next += n;
+ state->x.pos += n;
+ len -= n;
+ }
+
+ /* output buffer empty -- return if we're at the end of the input */
+ else if (state->eof && state->strm.avail_in == 0)
+ break;
+
+ /* need more data to skip -- load up output buffer */
+ else {
+ /* get more output, looking for header if required */
+ if (gz_fetch(state) == -1)
+ return -1;
+ }
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzread(file, buf, len)
+ gzFile file;
+ voidp buf;
+ unsigned len;
+{
+ unsigned got, n;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're reading and that there's no (serious) error */
+ if (state->mode != GZ_READ ||
+ (state->err != Z_OK && state->err != Z_BUF_ERROR))
+ return -1;
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids the flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+ return -1;
+ }
+
+ /* if len is zero, avoid unnecessary operations */
+ if (len == 0)
+ return 0;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* get len bytes to buf, or less than len if at the end */
+ got = 0;
+ do {
+ /* first just try copying data from the output buffer */
+ if (state->x.have) {
+ n = state->x.have > len ? len : state->x.have;
+ memcpy(buf, state->x.next, n);
+ state->x.next += n;
+ state->x.have -= n;
+ }
+
+ /* output buffer empty -- return if we're at the end of the input */
+ else if (state->eof && strm->avail_in == 0) {
+ state->past = 1; /* tried to read past end */
+ break;
+ }
+
+ /* need output data -- for small len or new stream load up our output
+ buffer */
+ else if (state->how == LOOK || len < (state->size << 1)) {
+ /* get more output, looking for header if required */
+ if (gz_fetch(state) == -1)
+ return -1;
+ continue; /* no progress yet -- go back to copy above */
+ /* the copy above assures that we will leave with space in the
+ output buffer, allowing at least one gzungetc() to succeed */
+ }
+
+ /* large len -- read directly into user buffer */
+ else if (state->how == COPY) { /* read directly */
+ if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
+ return -1;
+ }
+
+ /* large len -- decompress directly into user buffer */
+ else { /* state->how == GZIP */
+ strm->avail_out = len;
+ strm->next_out = (unsigned char *)buf;
+ if (gz_decomp(state) == -1)
+ return -1;
+ n = state->x.have;
+ state->x.have = 0;
+ }
+
+ /* update progress */
+ len -= n;
+ buf = (char *)buf + n;
+ got += n;
+ state->x.pos += n;
+ } while (len);
+
+ /* return number of bytes read into user buffer (will fit in int) */
+ return (int)got;
+}
+
+/* -- see zlib.h -- */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+#else
+# undef gzgetc
+#endif
+int ZEXPORT gzgetc(file)
+ gzFile file;
+{
+ int ret;
+ unsigned char buf[1];
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no (serious) error */
+ if (state->mode != GZ_READ ||
+ (state->err != Z_OK && state->err != Z_BUF_ERROR))
+ return -1;
+
+ /* try output buffer (no need to check for skip request) */
+ if (state->x.have) {
+ state->x.have--;
+ state->x.pos++;
+ return *(state->x.next)++;
+ }
+
+ /* nothing there -- try gzread() */
+ ret = gzread(file, buf, 1);
+ return ret < 1 ? -1 : buf[0];
+}
+
+int ZEXPORT gzgetc_(file)
+gzFile file;
+{
+ return gzgetc(file);
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzungetc(c, file)
+ int c;
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no (serious) error */
+ if (state->mode != GZ_READ ||
+ (state->err != Z_OK && state->err != Z_BUF_ERROR))
+ return -1;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* can't push EOF */
+ if (c < 0)
+ return -1;
+
+ /* if output buffer empty, put byte at end (allows more pushing) */
+ if (state->x.have == 0) {
+ state->x.have = 1;
+ state->x.next = state->out + (state->size << 1) - 1;
+ state->x.next[0] = c;
+ state->x.pos--;
+ state->past = 0;
+ return c;
+ }
+
+ /* if no room, give up (must have already done a gzungetc()) */
+ if (state->x.have == (state->size << 1)) {
+ gz_error(state, Z_DATA_ERROR, "out of room to push characters");
+ return -1;
+ }
+
+ /* slide output data if needed and insert byte before existing data */
+ if (state->x.next == state->out) {
+ unsigned char *src = state->out + state->x.have;
+ unsigned char *dest = state->out + (state->size << 1);
+ while (src > state->out)
+ *--dest = *--src;
+ state->x.next = dest;
+ }
+ state->x.have++;
+ state->x.next--;
+ state->x.next[0] = c;
+ state->x.pos--;
+ state->past = 0;
+ return c;
+}
+
+/* -- see zlib.h -- */
+char * ZEXPORT gzgets(file, buf, len)
+ gzFile file;
+ char *buf;
+ int len;
+{
+ unsigned left, n;
+ char *str;
+ unsigned char *eol;
+ gz_statep state;
+
+ /* check parameters and get internal structure */
+ if (file == NULL || buf == NULL || len < 1)
+ return NULL;
+ state = (gz_statep)file;
+
+ /* check that we're reading and that there's no (serious) error */
+ if (state->mode != GZ_READ ||
+ (state->err != Z_OK && state->err != Z_BUF_ERROR))
+ return NULL;
+
+ /* process a skip request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_skip(state, state->skip) == -1)
+ return NULL;
+ }
+
+ /* copy output bytes up to new line or len - 1, whichever comes first --
+ append a terminating zero to the string (we don't check for a zero in
+ the contents, let the user worry about that) */
+ str = buf;
+ left = (unsigned)len - 1;
+ if (left) do {
+ /* assure that something is in the output buffer */
+ if (state->x.have == 0 && gz_fetch(state) == -1)
+ return NULL; /* error */
+ if (state->x.have == 0) { /* end of file */
+ state->past = 1; /* read past end */
+ break; /* return what we have */
+ }
+
+ /* look for end-of-line in current output buffer */
+ n = state->x.have > left ? left : state->x.have;
+ eol = (unsigned char *)memchr(state->x.next, '\n', n);
+ if (eol != NULL)
+ n = (unsigned)(eol - state->x.next) + 1;
+
+ /* copy through end-of-line, or remainder if not found */
+ memcpy(buf, state->x.next, n);
+ state->x.have -= n;
+ state->x.next += n;
+ state->x.pos += n;
+ left -= n;
+ buf += n;
+ } while (left && eol == NULL);
+
+ /* return terminated string, or if nothing, end of file */
+ if (buf == str)
+ return NULL;
+ buf[0] = 0;
+ return str;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzdirect(file)
+ gzFile file;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* if the state is not known, but we can find out, then do so (this is
+ mainly for right after a gzopen() or gzdopen()) */
+ if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
+ (void)gz_look(state);
+
+ /* return 1 if transparent, 0 if processing a gzip stream */
+ return state->direct;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_r(file)
+ gzFile file;
+{
+ int ret, err;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're reading */
+ if (state->mode != GZ_READ)
+ return Z_STREAM_ERROR;
+
+ /* free memory and close file */
+ if (state->size) {
+ inflateEnd(&(state->strm));
+ free(state->out);
+ free(state->in);
+ }
+ err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
+ gz_error(state, Z_OK, NULL);
+ free(state->path);
+ ret = close(state->fd);
+ free(state);
+ return ret ? Z_ERRNO : err;
+}
--- /dev/null
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_init OF((gz_statep));
+local int gz_comp OF((gz_statep, int));
+local int gz_zero OF((gz_statep, z_off64_t));
+
+/* Initialize state for writing a gzip file. Mark initialization by setting
+ state->size to non-zero. Return -1 on failure or 0 on success. */
+local int gz_init(state)
+ gz_statep state;
+{
+ int ret;
+ z_streamp strm = &(state->strm);
+
+ /* allocate input buffer */
+ state->in = (unsigned char *)malloc(state->want);
+ if (state->in == NULL) {
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* only need output buffer and deflate state if compressing */
+ if (!state->direct) {
+ /* allocate output buffer */
+ state->out = (unsigned char *)malloc(state->want);
+ if (state->out == NULL) {
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* allocate deflate memory, set up for gzip compression */
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+ strm->opaque = Z_NULL;
+ ret = deflateInit2(strm, state->level, Z_DEFLATED,
+ MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
+ if (ret != Z_OK) {
+ free(state->out);
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ }
+
+ /* mark state as initialized */
+ state->size = state->want;
+
+ /* initialize write buffer if compressing */
+ if (!state->direct) {
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ state->x.next = strm->next_out;
+ }
+ return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+ Return -1 if there is an error writing to the output file, otherwise 0.
+ flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
+ then the deflate() state is reset to start a new gzip stream. If gz->direct
+ is true, then simply write to the output file without compressing, and
+ ignore flush. */
+local int gz_comp(state, flush)
+ gz_statep state;
+ int flush;
+{
+ int ret, got;
+ unsigned have;
+ z_streamp strm = &(state->strm);
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return -1;
+
+ /* write directly if requested */
+ if (state->direct) {
+ got = write(state->fd, strm->next_in, strm->avail_in);
+ if (got < 0 || (unsigned)got != strm->avail_in) {
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ strm->avail_in = 0;
+ return 0;
+ }
+
+ /* run deflate() on provided input until it produces no more output */
+ ret = Z_OK;
+ do {
+ /* write out current buffer contents if full, or if flushing, but if
+ doing Z_FINISH then don't write until we get to Z_STREAM_END */
+ if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+ (flush != Z_FINISH || ret == Z_STREAM_END))) {
+ have = (unsigned)(strm->next_out - state->x.next);
+ if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
+ (unsigned)got != have)) {
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ if (strm->avail_out == 0) {
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ }
+ state->x.next = strm->next_out;
+ }
+
+ /* compress */
+ have = strm->avail_out;
+ ret = deflate(strm, flush);
+ if (ret == Z_STREAM_ERROR) {
+ gz_error(state, Z_STREAM_ERROR,
+ "internal error: deflate stream corrupt");
+ return -1;
+ }
+ have -= strm->avail_out;
+ } while (have);
+
+ /* if that completed a deflate stream, allow another to start */
+ if (flush == Z_FINISH)
+ deflateReset(strm);
+
+ /* all done, no errors */
+ return 0;
+}
+
+/* Compress len zeros to output. Return -1 on error, 0 on success. */
+local int gz_zero(state, len)
+ gz_statep state;
+ z_off64_t len;
+{
+ int first;
+ unsigned n;
+ z_streamp strm = &(state->strm);
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return -1;
+
+ /* compress len zeros (len guaranteed > 0) */
+ first = 1;
+ while (len) {
+ n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
+ (unsigned)len : state->size;
+ if (first) {
+ memset(state->in, 0, n);
+ first = 0;
+ }
+ strm->avail_in = n;
+ strm->next_in = state->in;
+ state->x.pos += n;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return -1;
+ len -= n;
+ }
+ return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+ gzFile file;
+ voidpc buf;
+ unsigned len;
+{
+ unsigned put = len;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids the flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+ return 0;
+ }
+
+ /* if len is zero, avoid unnecessary operations */
+ if (len == 0)
+ return 0;
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* for small len, copy to input buffer, otherwise compress directly */
+ if (len < state->size) {
+ /* copy to input buffer, compress when full */
+ do {
+ unsigned have, copy;
+
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+ copy = state->size - have;
+ if (copy > len)
+ copy = len;
+ memcpy(state->in + have, buf, copy);
+ strm->avail_in += copy;
+ state->x.pos += copy;
+ buf = (const char *)buf + copy;
+ len -= copy;
+ if (len && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+ } while (len);
+ }
+ else {
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* directly compress user buffer to file */
+ strm->avail_in = len;
+ strm->next_in = (z_const Bytef *)buf;
+ state->x.pos += len;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+ }
+
+ /* input was all buffered or compressed (put will fit in int) */
+ return (int)put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(file, c)
+ gzFile file;
+ int c;
+{
+ unsigned have;
+ unsigned char buf[1];
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return -1;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* try writing to input buffer for speed (state->size == 0 if buffer not
+ initialized) */
+ if (state->size) {
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+ if (have < state->size) {
+ state->in[have] = c;
+ strm->avail_in++;
+ state->x.pos++;
+ return c & 0xff;
+ }
+ }
+
+ /* no room in buffer or not initialized, use gz_write() */
+ buf[0] = c;
+ if (gzwrite(file, buf, 1) != 1)
+ return -1;
+ return c & 0xff;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(file, str)
+ gzFile file;
+ const char *str;
+{
+ int ret;
+ unsigned len;
+
+ /* write string */
+ len = (unsigned)strlen(str);
+ ret = gzwrite(file, str, len);
+ return ret == 0 && len != 0 ? -1 : ret;
+}
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
+{
+ int size, len;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* do the printf() into the input buffer, put length in len */
+ size = (int)(state->size);
+ state->in[size - 1] = 0;
+#ifdef NO_vsnprintf
+# ifdef HAS_vsprintf_void
+ (void)vsprintf((char *)(state->in), format, va);
+ for (len = 0; len < size; len++)
+ if (state->in[len] == 0) break;
+# else
+ len = vsprintf((char *)(state->in), format, va);
+# endif
+#else
+# ifdef HAS_vsnprintf_void
+ (void)vsnprintf((char *)(state->in), size, format, va);
+ len = strlen((char *)(state->in));
+# else
+ len = vsnprintf((char *)(state->in), size, format, va);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+ return 0;
+
+ /* update buffer and position, defer compression until needed */
+ strm->avail_in = (unsigned)len;
+ strm->next_in = state->in;
+ state->x.pos += len;
+ return len;
+}
+
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
+{
+ va_list va;
+ int ret;
+
+ va_start(va, format);
+ ret = gzvprintf(file, format, va);
+ va_end(va);
+ return ret;
+}
+
+#else /* !STDC && !Z_HAVE_STDARG_H */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+ gzFile file;
+ const char *format;
+ int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+ int size, len;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that can really pass pointer in ints */
+ if (sizeof(int) != sizeof(void *))
+ return 0;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return 0;
+ }
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* do the printf() into the input buffer, put length in len */
+ size = (int)(state->size);
+ state->in[size - 1] = 0;
+#ifdef NO_snprintf
+# ifdef HAS_sprintf_void
+ sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ for (len = 0; len < size; len++)
+ if (state->in[len] == 0) break;
+# else
+ len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#else
+# ifdef HAS_snprintf_void
+ snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ len = strlen((char *)(state->in));
+# else
+ len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
+ a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
+ a19, a20);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+ return 0;
+
+ /* update buffer and position, defer compression until needed */
+ strm->avail_in = (unsigned)len;
+ strm->next_in = state->in;
+ state->x.pos += len;
+ return len;
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(file, flush)
+ gzFile file;
+ int flush;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return Z_STREAM_ERROR;
+
+ /* check flush parameter */
+ if (flush < 0 || flush > Z_FINISH)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* compress remaining data with requested flush */
+ gz_comp(state, flush);
+ return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(file, level, strategy)
+ gzFile file;
+ int level;
+ int strategy;
+{
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return Z_STREAM_ERROR;
+
+ /* if no change is requested, then do nothing */
+ if (level == state->level && strategy == state->strategy)
+ return Z_OK;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ return -1;
+ }
+
+ /* change compression parameters for subsequent input */
+ if (state->size) {
+ /* flush previous input with previous parameters before changing */
+ if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+ return state->err;
+ deflateParams(strm, level, strategy);
+ }
+ state->level = level;
+ state->strategy = strategy;
+ return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(file)
+ gzFile file;
+{
+ int ret = Z_OK;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're writing */
+ if (state->mode != GZ_WRITE)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->seek) {
+ state->seek = 0;
+ if (gz_zero(state, state->skip) == -1)
+ ret = state->err;
+ }
+
+ /* flush, free memory, and close file */
+ if (gz_comp(state, Z_FINISH) == -1)
+ ret = state->err;
+ if (state->size) {
+ if (!state->direct) {
+ (void)deflateEnd(&(state->strm));
+ free(state->out);
+ }
+ free(state->in);
+ }
+ gz_error(state, Z_OK, NULL);
+ free(state->path);
+ if (close(state->fd) == -1)
+ ret = Z_ERRNO;
+ free(state);
+ return ret;
+}
--- /dev/null
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ This code is largely copied from inflate.c. Normally either infback.o or
+ inflate.o would be linked into an application--not both. The interface
+ with inffast.c is retained so that optimized assembler-coded versions of
+ inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+ strm provides memory allocation functions in zalloc and zfree, or
+ Z_NULL to use the library memory allocation functions.
+
+ windowBits is in the range 8..15, and window is a user-supplied
+ window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
+z_streamp strm;
+int windowBits;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL || window == Z_NULL ||
+ windowBits < 8 || windowBits > 15)
+ return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+ sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->dmax = 32768U;
+ state->wbits = windowBits;
+ state->wsize = 1U << windowBits;
+ state->window = window;
+ state->wnext = 0;
+ state->whave = 0;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Assure that some input is available. If input is requested, but denied,
+ then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+ do { \
+ if (have == 0) { \
+ have = in(in_desc, &next); \
+ if (have == 0) { \
+ next = Z_NULL; \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+ with an error if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ PULL(); \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflateBack() with
+ an error. */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Assure that some output space is available, by writing out the window
+ if it's full. If the write fails, return from inflateBack() with a
+ Z_BUF_ERROR. */
+#define ROOM() \
+ do { \
+ if (left == 0) { \
+ put = state->window; \
+ left = state->wsize; \
+ state->whave = left; \
+ if (out(out_desc, put, left)) { \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/*
+ strm provides the memory allocation functions and window buffer on input,
+ and provides information on the unused input on return. For Z_DATA_ERROR
+ returns, strm will also provide an error message.
+
+ in() and out() are the call-back input and output functions. When
+ inflateBack() needs more input, it calls in(). When inflateBack() has
+ filled the window with output, or when it completes with data in the
+ window, it calls out() to write out the data. The application must not
+ change the provided input until in() is called again or inflateBack()
+ returns. The application must not change the window/output buffer until
+ inflateBack() returns.
+
+ in() and out() are called with a descriptor parameter provided in the
+ inflateBack() call. This parameter can be a structure that provides the
+ information required to do the read or write, as well as accumulated
+ information on the input and output such as totals and check values.
+
+ in() should return zero on failure. out() should return non-zero on
+ failure. If either in() or out() fails, than inflateBack() returns a
+ Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
+ was in() or out() that caused in the error. Otherwise, inflateBack()
+ returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+ error, or Z_MEM_ERROR if it could not allocate memory for the state.
+ inflateBack() can also return Z_STREAM_ERROR if the input parameters
+ are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
+z_streamp strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* Check that the strm exists and that the state was initialized */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* Reset the state */
+ strm->msg = Z_NULL;
+ state->mode = TYPE;
+ state->last = 0;
+ state->whave = 0;
+ next = strm->next_in;
+ have = next != Z_NULL ? strm->avail_in : 0;
+ hold = 0;
+ bits = 0;
+ put = state->window;
+ left = state->wsize;
+
+ /* Inflate until end of block marked as last */
+ for (;;)
+ switch (state->mode) {
+ case TYPE:
+ /* determine and dispatch block type */
+ if (state->last) {
+ BYTEBITS();
+ state->mode = DONE;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+
+ case STORED:
+ /* get and verify stored block length */
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+
+ /* copy stored block from input to output */
+ while (state->length != 0) {
+ copy = state->length;
+ PULL();
+ ROOM();
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+
+ case TABLE:
+ /* get dynamic table entries descriptor */
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+
+ /* get code length code lengths (not a typo) */
+ state->have = 0;
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+
+ /* get length and distance code code lengths */
+ state->have = 0;
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = (unsigned)(state->lens[state->have - 1]);
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN;
+
+ case LEN:
+ /* use inflate_fast() if we have enough input and output */
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ if (state->whave < state->wsize)
+ state->whave = state->wsize - left;
+ inflate_fast(strm, state->wsize);
+ LOAD();
+ break;
+ }
+
+ /* get a literal, length, or end-of-block code */
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ state->length = (unsigned)here.val;
+
+ /* process literal */
+ if (here.op == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ ROOM();
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ }
+
+ /* process end of block */
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+
+ /* invalid code */
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+
+ /* length code -- get extra bits, if any */
+ state->extra = (unsigned)(here.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+
+ /* get distance code */
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+
+ /* get distance extra bits, if any */
+ state->extra = (unsigned)(here.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ if (state->offset > state->wsize - (state->whave < state->wsize ?
+ left : 0)) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+
+ /* copy match from window to output */
+ do {
+ ROOM();
+ copy = state->wsize - state->offset;
+ if (copy < left) {
+ from = put + copy;
+ copy = left - copy;
+ }
+ else {
+ from = put - state->offset;
+ copy = left;
+ }
+ if (copy > state->length) copy = state->length;
+ state->length -= copy;
+ left -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ } while (state->length != 0);
+ break;
+
+ case DONE:
+ /* inflate stream terminated properly -- write leftover output */
+ ret = Z_STREAM_END;
+ if (left < state->wsize) {
+ if (out(out_desc, state->window, state->wsize - left))
+ ret = Z_BUF_ERROR;
+ }
+ goto inf_leave;
+
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+
+ default: /* can't happen, but makes compilers happy */
+ ret = Z_STREAM_ERROR;
+ goto inf_leave;
+ }
+
+ /* Return unused input */
+ inf_leave:
+ strm->next_in = next;
+ strm->avail_in = have;
+ return ret;
+}
+
+int ZEXPORT inflateBackEnd(strm)
+z_streamp strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
--- /dev/null
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+ Based on testing to date,
+ Pre-increment preferred for:
+ - PowerPC G3 (Adler)
+ - MIPS R5000 (Randers-Pehrson)
+ Post-increment preferred for:
+ - none
+ No measurable difference:
+ - Pentium III (Anderson)
+ - M68060 (Nikl)
+ */
+#ifdef POSTINC
+# define OFF 0
+# define PUP(a) *(a)++
+#else
+# define OFF 1
+# define PUP(a) *++(a)
+#endif
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *in; /* local strm->next_in */
+ z_const unsigned char FAR *last; /* have enough input while in < last */
+ unsigned char FAR *out; /* local strm->next_out */
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
+ unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const FAR *lcode; /* local strm->lencode */
+ code const FAR *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code here; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char FAR *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ in = strm->next_in - OFF;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out - OFF;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ wnext = state->wnext;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ here = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op == 0) { /* literal */
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ PUP(out) = (unsigned char)(here.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ Tracevv((stderr, "inflate: length %u\n", len));
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ here = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ Tracevv((stderr, "inflate: distance %u\n", dist));
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ if (state->sane) {
+ strm->msg =
+ (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (len <= op - whave) {
+ do {
+ PUP(out) = 0;
+ } while (--len);
+ continue;
+ }
+ len -= op - whave;
+ do {
+ PUP(out) = 0;
+ } while (--op > whave);
+ if (op == 0) {
+ from = out - dist;
+ do {
+ PUP(out) = PUP(from);
+ } while (--len);
+ continue;
+ }
+#endif
+ }
+ from = window - OFF;
+ if (wnext == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (wnext < op) { /* wrap around window */
+ from += wsize + wnext - op;
+ op -= wnext;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = window - OFF;
+ if (wnext < len) { /* some from start of window */
+ op = wnext;
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += wnext - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ }
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ here = dcode[here.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ here = lcode[here.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in + OFF;
+ strm->next_out = out + OFF;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and wnext == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
--- /dev/null
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- /dev/null
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications.
+ It is part of the implementation of this library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
--- /dev/null
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0 24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ * creation of window when not needed, minimize use of window when it is
+ * needed, make inffast.c even faster, implement gzip decoding, and to
+ * improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1 25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2 4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ * to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3 22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ * buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4 1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ * source file infback.c to provide a call-back interface to inflate for
+ * programs like gzip and unzip -- uses window as output buffer to avoid
+ * window copying
+ *
+ * 1.2.beta5 1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ * input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6 4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ * make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7 27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0 9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ * for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ * and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+# ifndef BUILDFIXED
+# define BUILDFIXED
+# endif
+#endif
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ unsigned copy));
+#ifdef BUILDFIXED
+ void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+ unsigned len));
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = Z_NULL;
+ if (state->wrap) /* to support ill-conceived Java test suite */
+ strm->adler = state->wrap & 1;
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+ state->sane = 1;
+ state->back = -1;
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->wsize = 0;
+ state->whave = 0;
+ state->wnext = 0;
+ return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+ int wrap;
+ struct inflate_state FAR *state;
+
+ /* get the state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* extract wrap request from windowBits parameter */
+ if (windowBits < 0) {
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+ if (windowBits < 48)
+ windowBits &= 15;
+#endif
+ }
+
+ /* set number of window bits, free window if different */
+ if (windowBits && (windowBits < 8 || windowBits > 15))
+ return Z_STREAM_ERROR;
+ if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+ ZFREE(strm, state->window);
+ state->window = Z_NULL;
+ }
+
+ /* update state and reset the rest of it */
+ state->wrap = wrap;
+ state->wbits = (unsigned)windowBits;
+ return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+ int ret;
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)
+ ZALLOC(strm, 1, sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->window = Z_NULL;
+ ret = inflateReset2(strm, windowBits);
+ if (ret != Z_OK) {
+ ZFREE(strm, state);
+ strm->state = Z_NULL;
+ }
+ return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits < 0) {
+ state->hold = 0;
+ state->bits = 0;
+ return Z_OK;
+ }
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+ Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
+ defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
+ those tables to stdout, which would be piped to inffixed.h. A small program
+ can simply call makefixed to do this:
+
+ void makefixed(void);
+
+ int main(void)
+ {
+ makefixed();
+ return 0;
+ }
+
+ Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+ a.out > inffixed.h
+ */
+void makefixed()
+{
+ unsigned low, size;
+ struct inflate_state state;
+
+ fixedtables(&state);
+ puts(" /* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by makefixed().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 7) == 0) printf("\n ");
+ printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+ state.lencode[low].bits, state.lencode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+ state.distcode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. If window does not exist yet, create it. This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+ struct inflate_state FAR *state;
+ unsigned dist;
+
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* if it hasn't been done already, allocate space for the window */
+ if (state->window == Z_NULL) {
+ state->window = (unsigned char FAR *)
+ ZALLOC(strm, 1U << state->wbits,
+ sizeof(unsigned char));
+ if (state->window == Z_NULL) return 1;
+ }
+
+ /* if window not in use yet, initialize */
+ if (state->wsize == 0) {
+ state->wsize = 1U << state->wbits;
+ state->wnext = 0;
+ state->whave = 0;
+ }
+
+ /* copy state->wsize or less output bytes into the circular window */
+ if (copy >= state->wsize) {
+ zmemcpy(state->window, end - state->wsize, state->wsize);
+ state->wnext = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->wnext;
+ if (dist > copy) dist = copy;
+ zmemcpy(state->window + state->wnext, end - copy, dist);
+ copy -= dist;
+ if (copy) {
+ zmemcpy(state->window, end - copy, copy);
+ state->wnext = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->wnext += dist;
+ if (state->wnext == state->wsize) state->wnext = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+ return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+# define UPDATE(check, buf, len) \
+ (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+# define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+# define CRC2(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ check = crc32(check, hbuf, 2); \
+ } while (0)
+
+# define CRC4(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ hbuf[2] = (unsigned char)((word) >> 16); \
+ hbuf[3] = (unsigned char)((word) >> 24); \
+ check = crc32(check, hbuf, 4); \
+ } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+#ifdef GUNZIP
+ unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
+#endif
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+#ifdef GUNZIP
+ if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
+ state->check = crc32(0L, Z_NULL, 0);
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = FLAGS;
+ break;
+ }
+ state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
+ if (!(state->wrap & 1) || /* check if zlib header allowed */
+#else
+ if (
+#endif
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (state->wbits == 0)
+ state->wbits = len;
+ else if (len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+#ifdef GUNZIP
+ case FLAGS:
+ NEEDBITS(16);
+ state->flags = (int)(hold);
+ if ((state->flags & 0xff) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ if (state->flags & 0xe000) {
+ strm->msg = (char *)"unknown header flags set";
+ state->mode = BAD;
+ break;
+ }
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = TIME;
+ case TIME:
+ NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
+ if (state->flags & 0x0200) CRC4(state->check, hold);
+ INITBITS();
+ state->mode = OS;
+ case OS:
+ NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = EXLEN;
+ case EXLEN:
+ if (state->flags & 0x0400) {
+ NEEDBITS(16);
+ state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ }
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
+ state->mode = EXTRA;
+ case EXTRA:
+ if (state->flags & 0x0400) {
+ copy = state->length;
+ if (copy > have) copy = have;
+ if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ state->length -= copy;
+ }
+ if (state->length) goto inf_leave;
+ }
+ state->length = 0;
+ state->mode = NAME;
+ case NAME:
+ if (state->flags & 0x0800) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
+ state->mode = COMMENT;
+ case COMMENT:
+ if (state->flags & 0x1000) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
+ state->mode = HCRC;
+ case HCRC:
+ if (state->flags & 0x0200) {
+ NEEDBITS(16);
+ if (hold != (state->check & 0xffff)) {
+ strm->msg = (char *)"header crc mismatch";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
+ strm->adler = state->check = crc32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ break;
+#endif
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = ZSWAP32(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN_; /* decode codes */
+ if (flush == Z_TREES) {
+ DROPBITS(2);
+ goto inf_leave;
+ }
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+ state->mode = COPY_;
+ if (flush == Z_TREES) goto inf_leave;
+ case COPY_:
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (const code FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN_;
+ if (flush == Z_TREES) goto inf_leave;
+ case LEN_:
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ if (state->mode == TYPE)
+ state->back = -1;
+ break;
+ }
+ state->back = 0;
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ state->length = (unsigned)here.val;
+ if ((int)(here.op) == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ state->mode = LIT;
+ break;
+ }
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->back = -1;
+ state->mode = TYPE;
+ break;
+ }
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->was = state->length;
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->whave) {
+ if (state->sane) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ Trace((stderr, "inflate.c too far\n"));
+ copy -= state->whave;
+ if (copy > state->length) copy = state->length;
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = 0;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+#endif
+ }
+ if (copy > state->wnext) {
+ copy -= state->wnext;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->wnext - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if (out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((
+#ifdef GUNZIP
+ state->flags ? hold :
+#endif
+ ZSWAP32(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: check matches trailer\n"));
+ }
+#ifdef GUNZIP
+ state->mode = LENGTH;
+ case LENGTH:
+ if (state->wrap && state->flags) {
+ NEEDBITS(32);
+ if (hold != (state->total & 0xffffffffUL)) {
+ strm->msg = (char *)"incorrect length check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: length matches trailer\n"));
+ }
+#endif
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call updatewindow() to create and/or update the window state.
+ Note: a memory error from inflate() is non-recoverable.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+ (state->mode < CHECK || flush != Z_FINISH)))
+ if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if (state->wrap && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+ strm->data_type = state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0) +
+ (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+ return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->window != Z_NULL) ZFREE(strm, state->window);
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* copy dictionary */
+ if (state->whave && dictionary != Z_NULL) {
+ zmemcpy(dictionary, state->window + state->wnext,
+ state->whave - state->wnext);
+ zmemcpy(dictionary + state->whave - state->wnext,
+ state->window, state->wnext);
+ }
+ if (dictLength != Z_NULL)
+ *dictLength = state->whave;
+ return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+ struct inflate_state FAR *state;
+ unsigned long dictid;
+ int ret;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary identifier */
+ if (state->mode == DICT) {
+ dictid = adler32(0L, Z_NULL, 0);
+ dictid = adler32(dictid, dictionary, dictLength);
+ if (dictid != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window using updatewindow(), which will amend the
+ existing dictionary if appropriate */
+ ret = updatewindow(strm, dictionary + dictLength, dictLength);
+ if (ret) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ state->havedict = 1;
+ Tracev((stderr, "inflate: dictionary set\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state FAR *state;
+
+ /* check parameters */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+ struct inflate_state FAR *state;
+ struct inflate_state FAR *copy;
+ unsigned char FAR *window;
+ unsigned wsize;
+
+ /* check input */
+ if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
+ source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)source->state;
+
+ /* allocate space */
+ copy = (struct inflate_state FAR *)
+ ZALLOC(source, 1, sizeof(struct inflate_state));
+ if (copy == Z_NULL) return Z_MEM_ERROR;
+ window = Z_NULL;
+ if (state->window != Z_NULL) {
+ window = (unsigned char FAR *)
+ ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+ if (window == Z_NULL) {
+ ZFREE(source, copy);
+ return Z_MEM_ERROR;
+ }
+ }
+
+ /* copy state */
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+ zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
+ copy->next = copy->codes + (state->next - state->codes);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
+ copy->window = window;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->sane = !subvert;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ return Z_OK;
+#else
+ state->sane = 1;
+ return Z_DATA_ERROR;
+#endif
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+ state = (struct inflate_state FAR *)strm->state;
+ return ((long)(state->back) << 16) +
+ (state->mode == COPY ? state->length :
+ (state->mode == MATCH ? state->was - state->length : 0));
+}
--- /dev/null
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2009 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip decoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY_, /* i/o: same as COPY below, but only first time in */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN_, /* i: same as LEN below, but only first time in */
+ LEN, /* i: waiting for length/lit/eob code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib) or (raw)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+ HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ (raw) -> TYPEDO
+ Read deflate blocks:
+ TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+ STORED -> COPY_ -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN_
+ LEN_ -> LEN
+ Read deflate codes in fixed or dynamic block:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls. Approximately 10K bytes. */
+struct inflate_state {
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+ int sane; /* if false, allow invalid distance too far */
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
+};
--- /dev/null
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+ " inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code here; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)1;
+ here.val = (unsigned short)0;
+ *(*table)++ = here; /* make a table to force an error */
+ *(*table)++ = here;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min < max; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftrees.h
+ for more information.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ here.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ here.op = (unsigned char)0;
+ here.val = work[sym];
+ }
+ else if ((int)(work[sym]) > end) {
+ here.op = (unsigned char)(extra[work[sym]]);
+ here.val = base[work[sym]];
+ }
+ else {
+ here.op = (unsigned char)(32 + 64); /* end of block */
+ here.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = here;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /* fill in remaining table entry if code is incomplete (guaranteed to have
+ at most one remaining entry, since if the code is incomplete, the
+ maximum code length that was allowed to get this far is one bit) */
+ if (huff != 0) {
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)(len - drop);
+ here.val = (unsigned short)0;
+ next[huff] = here;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
--- /dev/null
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1444, which is the sum of 852 for literal/length codes and 592 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in inflate.c and infback.c. If the root table size is
+ changed, then these maximum sizes would be need to be recalculated and
+ updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
--- /dev/null
+$! make libz under VMS written by
+$! Martin P.J. Zinser
+$!
+$! In case of problems with the install you might contact me at
+$! zinser@zinser.no-ip.info(preferred) or
+$! martin.zinser@eurexchange.com (work)
+$!
+$! Make procedure history for Zlib
+$!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20060120 First version to receive a number
+$! 0.02 20061008 Adapt to new Makefile.in
+$! 0.03 20091224 Add support for large file check
+$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
+$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
+$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
+$! subdir path, update module search in makefile.in
+$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
+$! shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$! image
+$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)).
+$! "" -> automatic, preference: MMK, MMS, built-in.
+$!
+$ on error then goto err_exit
+$!
+$ true = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ tt = tmpnam + ".txt"
+$ tc = tmpnam + ".c"
+$ th = tmpnam + ".h"
+$ define/nolog tconfig 'th'
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ s_case = False
+$!
+$! Setup variables holding "config" information
+$!
+$ Make = "''p1'"
+$ name = "Zlib"
+$ version = "?.?.?"
+$ v_string = "ZLIB_VERSION"
+$ v_file = "zlib.h"
+$ ccopt = "/include = []"
+$ lopts = ""
+$ dnsrl = ""
+$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
+$ conf_check_string = ""
+$ linkonly = false
+$ optfile = name + ".opt"
+$ mapfile = name + ".map"
+$ libdefs = ""
+$ vax = f$getsyi("HW_MODEL").lt.1024
+$ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
+$ ia64 = f$getsyi("HW_MODEL").ge.4096
+$!
+$! 2012-03-05 SMS.
+$! Why is this needed? And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
+$ mydef = F$parse(whoami,,,"DEVICE")
+$ mydir = f$parse(whoami,,,"DIRECTORY") - "]["
+$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
+$!
+$! Check for MMK/MMS
+$!
+$ if (Make .eqs. "")
+$ then
+$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ else
+$ Make = f$edit( Make, "trim")
+$ endif
+$!
+$ gosub find_version
+$!
+$ open/write topt tmp.opt
+$ open/write optf 'optfile'
+$!
+$ gosub check_opts
+$!
+$! Look for the compiler used
+$!
+$ gosub check_compiler
+$ close topt
+$ close optf
+$!
+$ if its_decc
+$ then
+$ ccopt = "/prefix=all" + ccopt
+$ if f$trnlnm("SYS") .eqs. ""
+$ then
+$ if axp
+$ then
+$ define sys sys$library:
+$ else
+$ ccopt = "/decc" + ccopt
+$ define sys decc$library_include:
+$ endif
+$ endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX?
+$!
+$ if axp .or. ia64
+$ then
+$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
+$ s_case = true
+$ endif
+$ endif
+$ if its_vaxc .or. its_gnuc
+$ then
+$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ endif
+$!
+$! Build a fake configure input header
+$!
+$ open/write conf_hin config.hin
+$ write conf_hin "#undef _LARGEFILE64_SOURCE"
+$ close conf_hin
+$!
+$!
+$ i = 0
+$FIND_ACONF:
+$ fname = f$element(i,"#",aconf_in_file)
+$ if fname .eqs. "#" then goto AMISS_ERR
+$ if f$search(fname) .eqs. ""
+$ then
+$ i = i + 1
+$ goto find_aconf
+$ endif
+$ open/read/err=aconf_err aconf_in 'fname'
+$ open/write aconf zconf.h
+$ACONF_LOOP:
+$ read/end_of_file=aconf_exit aconf_in line
+$ work = f$edit(line, "compress,trim")
+$ if f$extract(0,6,work) .nes. "#undef"
+$ then
+$ if f$extract(0,12,work) .nes. "#cmakedefine"
+$ then
+$ write aconf line
+$ endif
+$ else
+$ cdef = f$element(1," ",work)
+$ gosub check_config
+$ endif
+$ goto aconf_loop
+$ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
+$ write aconf "#define VMS 1"
+$ write aconf "#include <unistd.h>"
+$ write aconf "#include <unixio.h>"
+$ write aconf "#ifdef _LARGEFILE"
+$ write aconf "# define off64_t __off64_t"
+$ write aconf "# define fopen64 fopen"
+$ write aconf "# define fseeko64 fseeko"
+$ write aconf "# define lseek64 lseek"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
+$ write aconf "#endif"
+$ close aconf_in
+$ close aconf
+$ if f$search("''th'") .nes. "" then delete 'th';*
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if make.eqs.""
+$ then
+$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
+$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+ adler32.c zlib.h zconf.h
+$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+ compress.c zlib.h zconf.h
+$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+ crc32.c zlib.h zconf.h
+$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+ deflate.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
+ gzclose.c zutil.h zlib.h zconf.h
+$ CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
+ gzlib.c zutil.h zlib.h zconf.h
+$ CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
+ gzread.c zutil.h zlib.h zconf.h
+$ CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
+ gzwrite.c zutil.h zlib.h zconf.h
+$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
+ infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+ inffast.c zutil.h zlib.h zconf.h inffast.h
+$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+ inflate.c zutil.h zlib.h zconf.h infblock.h
+$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+ inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+ trees.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+ uncompr.c zlib.h zconf.h
+$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+ zutil.c zutil.h zlib.h zconf.h
+$ write sys$output "Building Zlib ..."
+$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$ write sys$output "Building example..."
+$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
+ [.test]example.c zlib.h zconf.h
+$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
+ [.test]minigzip.c zlib.h zconf.h
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib" -
+ minigzip.obj libz.olb
+$ else
+$ gosub crea_mms
+$ write sys$output "Make ''name' ''version' with ''Make' "
+$ 'make'
+$ endif
+$!
+$! Create shareable image
+$!
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call map_2_shopt 'mapfile' 'optfile'
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
+$ write sys$output "Zlib build completed"
+$ delete/nolog tmp.opt;*
+$ exit
+$AMISS_ERR:
+$ write sys$output "No source for config.hin found."
+$ write sys$output "Tried any of ''aconf_in_file'"
+$ goto err_exit
+$CC_ERR:
+$ write sys$output "C compiler required to build ''name'"
+$ goto err_exit
+$ERR_EXIT:
+$ set message/facil/ident/sever/text
+$ close/nolog optf
+$ close/nolog topt
+$ close/nolog aconf_in
+$ close/nolog aconf
+$ close/nolog out
+$ close/nolog min
+$ close/nolog mod
+$ close/nolog h_in
+$ write sys$output "Exiting..."
+$ exit 2
+$!
+$!
+$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8 What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$ Argument = P'arg
+$ If Argument .Eqs. "" Then Goto Exit
+$ El=0
+$Loop2:
+$ File = F$Element(El," ",Argument)
+$ If File .Eqs. " " Then Goto Endl
+$ AFile = ""
+$Loop3:
+$ OFile = AFile
+$ AFile = F$Search(File)
+$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$ Goto Loop3
+$NextEL:
+$ El = El + 1
+$ Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Check command line options and set symbols accordingly
+$!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20041206 First version to receive a number
+$! 0.02 20060126 Add new "HELP" target
+$ CHECK_OPTS:
+$ i = 1
+$ OPT_LOOP:
+$ if i .lt. 9
+$ then
+$ cparm = f$edit(p'i',"upcase")
+$!
+$! Check if parameter actually contains something
+$!
+$ if f$edit(cparm,"trim") .nes. ""
+$ then
+$ if cparm .eqs. "DEBUG"
+$ then
+$ ccopt = ccopt + "/noopt/deb"
+$ lopts = lopts + "/deb"
+$ endif
+$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ ccopt = ccopt + f$extract(start,len,cparm)
+$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+ then s_case = true
+$ endif
+$ if cparm .eqs. "LINK" then linkonly = true
+$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ lopts = lopts + f$extract(start,len,cparm)
+$ endif
+$ if f$locate("CC=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ cc_com = f$extract(start,len,cparm)
+ if (cc_com .nes. "DECC") .and. -
+ (cc_com .nes. "VAXC") .and. -
+ (cc_com .nes. "GNUC")
+$ then
+$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$ write sys$output "Use DECC, VAXC, or GNUC instead"
+$ else
+$ if cc_com .eqs. "DECC" then its_decc = true
+$ if cc_com .eqs. "VAXC" then its_vaxc = true
+$ if cc_com .eqs. "GNUC" then its_gnuc = true
+$ endif
+$ endif
+$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ mmks = f$extract(start,len,cparm)
+$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$ then
+$ make = mmks
+$ else
+$ write sys$output "Unsupported make choice ''mmks' ignored"
+$ write sys$output "Use MMK or MMS instead"
+$ endif
+$ endif
+$ if cparm .eqs. "HELP" then gosub bhelp
+$ endif
+$ i = i + 1
+$ goto opt_loop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Look for the compiler used
+$!
+$! Version history
+$! 0.01 20040223 First version to receive a number
+$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
+$! 0.03 20060202 Extend handling of GNU C
+$! 0.04 20090402 Compaq -> hp
+$CHECK_COMPILER:
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then
+$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
+$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
+$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
+$ endif
+$!
+$! Exit if no compiler available
+$!
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then goto CC_ERR
+$ else
+$ if its_decc
+$ then
+$ write sys$output "CC compiler check ... hp C"
+$ if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
+$ then
+$ dnrsl = f$trnlnm("decc$no_rooted_search_lists")
+$ endif
+$ define/nolog decc$no_rooted_search_lists 1
+$ else
+$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$ if its_gnuc
+$ then
+$ write sys$output "CC compiler check ... GNU C"
+$ if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
+$ if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
+$ cc = "gcc"
+$ endif
+$ if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
+$ if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
+$ endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! If MMS/MMK are available dump out the descrip.mms if required
+$!
+$CREA_MMS:
+$ write sys$output "Creating descrip.mms..."
+$ create descrip.mms
+$ open/append out descrip.mms
+$ copy sys$input: out
+$ deck
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser
+# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
+ gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, \
+ inftrees.obj, inffast.obj
+
+$ eod
+$ write out "CFLAGS=", ccopt
+$ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
+$ copy sys$input: out
+$ deck
+ @ write sys$output " Example applications available"
+
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link $(LOPTS) example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link $(LOPTS) minigzip,libz.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
+
+
+# Other dependencies.
+adler32.obj : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj : crc32.c zutil.h zlib.h zconf.h
+deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj : [.test]example.c zlib.h zconf.h
+gzclose.obj : gzclose.c zutil.h zlib.h zconf.h
+gzlib.obj : gzlib.c zutil.h zlib.h zconf.h
+gzread.obj : gzread.c zutil.h zlib.h zconf.h
+gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h
+inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : [.test]minigzip.c zlib.h zconf.h
+trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : uncompr.c zlib.h zconf.h
+zutil.obj : zutil.c zutil.h zlib.h zconf.h
+infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ eod
+$ close out
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Read list of core library sources from makefile.in and create options
+$! needed to build shareable image
+$!
+$CREA_OLIST:
+$ open/read min makefile.in
+$ open/write mod modules.opt
+$ src_check_list = "OBJZ =#OBJG ="
+$MRLOOP:
+$ read/end=mrdone min rec
+$ i = 0
+$SRC_CHECK_LOOP:
+$ src_check = f$element(i, "#", src_check_list)
+$ i = i+1
+$ if src_check .eqs. "#" then goto mrloop
+$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
+$ rec = rec - src_check
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
+$MRSLOOP:
+$ read/end=mrdone min rec
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
+$MRDONE:
+$ close min
+$ close mod
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Take record extracted in crea_olist and split it into single filenames
+$!
+$EXTRA_FILNAM:
+$ myrec = f$edit(rec - "\", "trim,compress")
+$ i = 0
+$FELOOP:
+$ srcfil = f$element(i," ", myrec)
+$ if (srcfil .nes. " ")
+$ then
+$ write mod f$parse(srcfil,,,"NAME"), ".obj"
+$ i = i + 1
+$ goto feloop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Find current Zlib version number
+$!
+$FIND_VERSION:
+$ open/read h_in 'v_file'
+$hloop:
+$ read/end=hdone h_in rec
+$ rec = f$edit(rec,"TRIM")
+$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
+$ rec = f$edit(rec - "#", "TRIM")
+$ if f$element(0," ",rec) .nes. "define" then goto hloop
+$ if f$element(1," ",rec) .eqs. v_string
+$ then
+$ version = 'f$element(2," ",rec)'
+$ goto hdone
+$ endif
+$ goto hloop
+$hdone:
+$ close h_in
+$ return
+$!------------------------------------------------------------------------------
+$!
+$CHECK_CONFIG:
+$!
+$ in_ldef = f$locate(cdef,libdefs)
+$ if (in_ldef .lt. f$length(libdefs))
+$ then
+$ write aconf "#define ''cdef' 1"
+$ libdefs = f$extract(0,in_ldef,libdefs) + -
+ f$extract(in_ldef + f$length(cdef) + 1, -
+ f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
+ libdefs)
+$ else
+$ if (f$type('cdef') .eqs. "INTEGER")
+$ then
+$ write aconf "#define ''cdef' ", 'cdef'
+$ else
+$ if (f$type('cdef') .eqs. "STRING")
+$ then
+$ write aconf "#define ''cdef' ", """", '''cdef'', """"
+$ else
+$ gosub check_cc_def
+$ endif
+$ endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check if this is a define relating to the properties of the C/C++
+$! compiler
+$!
+$ CHECK_CC_DEF:
+$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
+$ then
+$ copy sys$input: 'tc'
+$ deck
+#include "tconfig"
+#define _LARGEFILE
+#include <stdio.h>
+
+int main(){
+FILE *fp;
+ fp = fopen("temp.txt","r");
+ fseeko(fp,1,SEEK_SET);
+ fclose(fp);
+}
+
+$ eod
+$ test_inv = false
+$ comm_h = false
+$ gosub cc_prop_check
+$ return
+$ endif
+$ write aconf "/* ", line, " */"
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler
+$!
+$! Version history
+$! 0.01 20031020 First version to receive a number
+$! 0.02 20031022 Added logic for defines with value
+$! 0.03 20040309 Make sure local config file gets not deleted
+$! 0.04 20041230 Also write include for configure run
+$! 0.05 20050103 Add processing of "comment defines"
+$CC_PROP_CHECK:
+$ cc_prop = true
+$ is_need = false
+$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
+$ if f$search(th) .eqs. "" then create 'th'
+$ set message/nofac/noident/nosever/notext
+$ on error then continue
+$ cc 'tmpnam'
+$ if .not. ($status) then cc_prop = false
+$ on error then continue
+$! The headers might lie about the capabilities of the RTL
+$ link 'tmpnam',tmp.opt/opt
+$ if .not. ($status) then cc_prop = false
+$ set message/fac/ident/sever/text
+$ on error then goto err_exit
+$ delete/nolog 'tmpnam'.*;*/exclude='th'
+$ if (cc_prop .and. .not. is_need) .or. -
+ (.not. cc_prop .and. is_need)
+$ then
+$ write sys$output "Checking for ''cdef'... yes"
+$ if f$type('cdef_val'_yes) .nes. ""
+$ then
+$ if f$type('cdef_val'_yes) .eqs. "INTEGER" -
+ then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
+$ if f$type('cdef_val'_yes) .eqs. "STRING" -
+ then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
+$ else
+$ call write_config f$fao("#define !AS 1",cdef)
+$ endif
+$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
+ (cdef .eqs. "_LARGEFILE64_SOURCE") then -
+ call write_config f$string("#define _LARGEFILE 1")
+$ else
+$ write sys$output "Checking for ''cdef'... no"
+$ if (comm_h)
+$ then
+ call write_config f$fao("/* !AS */",line)
+$ else
+$ if f$type('cdef_val'_no) .nes. ""
+$ then
+$ if f$type('cdef_val'_no) .eqs. "INTEGER" -
+ then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
+$ if f$type('cdef_val'_no) .eqs. "STRING" -
+ then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
+$ else
+$ call write_config f$fao("#undef !AS",cdef)
+$ endif
+$ endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler with multiple result values
+$!
+$! Version history
+$! 0.01 20040127 First version
+$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
+$CC_MPROP_CHECK:
+$ cc_prop = true
+$ i = 1
+$ idel = 1
+$ MT_LOOP:
+$ if f$type(result_'i') .eqs. "STRING"
+$ then
+$ set message/nofac/noident/nosever/notext
+$ on error then continue
+$ cc 'tmpnam'_'i'
+$ if .not. ($status) then cc_prop = false
+$ on error then continue
+$! The headers might lie about the capabilities of the RTL
+$ link 'tmpnam'_'i',tmp.opt/opt
+$ if .not. ($status) then cc_prop = false
+$ set message/fac/ident/sever/text
+$ on error then goto err_exit
+$ delete/nolog 'tmpnam'_'i'.*;*
+$ if (cc_prop)
+$ then
+$ write sys$output "Checking for ''cdef'... ", mdef_'i'
+$ if f$type(mdef_'i') .eqs. "INTEGER" -
+ then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
+$ if f$type('cdef_val'_yes) .eqs. "STRING" -
+ then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
+$ goto msym_clean
+$ else
+$ i = i + 1
+$ goto mt_loop
+$ endif
+$ endif
+$ write sys$output "Checking for ''cdef'... no"
+$ call write_config f$fao("#undef !AS",cdef)
+$ MSYM_CLEAN:
+$ if (idel .le. msym_max)
+$ then
+$ delete/sym mdef_'idel'
+$ idel = idel + 1
+$ goto msym_clean
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Write configuration to both permanent and temporary config file
+$!
+$! Version history
+$! 0.01 20031029 First version to receive a number
+$!
+$WRITE_CONFIG: SUBROUTINE
+$ write aconf 'p1'
+$ open/append confh 'th'
+$ write confh 'p1'
+$ close confh
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Analyze the project map file and create the symbol vector for a shareable
+$! image from it
+$!
+$! Version history
+$! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
+$!
+$ MAP_2_SHOPT: Subroutine
+$!
+$ SAY := "WRITE_ SYS$OUTPUT"
+$!
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available"
+$ goto exit_m2s
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$ SAY "MAP_2_SHOPT: Error, no output file provided"
+$ goto exit_m2s
+$ ENDIF
+$!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
+$ open/read map 'p1
+$ if axp .or. ia64
+$ then
+$ open/write aopt a.opt
+$ open/write bopt b.opt
+$ write aopt " CASE_SENSITIVE=YES"
+$ write bopt "SYMBOL_VECTOR= (-"
+$ mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$ if f$type(module'mod_sym_num') .nes. ""
+$ then
+$ mod_in = 0
+$ MOD_SYM_IN:
+$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$ if shared_proc .nes. "#"
+$ then
+$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+ f$edit(shared_proc,"upcase"),shared_proc)
+$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$ mod_in = mod_in + 1
+$ goto mod_sym_in
+$ endif
+$ mod_sym_num = mod_sym_num + 1
+$ goto mod_sym_loop
+$ endif
+$MAP_LOOP:
+$ read/end=map_end map line
+$ if (f$locate("{",line).lt. f$length(line)) .or. -
+ (f$locate("global:", line) .lt. f$length(line))
+$ then
+$ proc = true
+$ goto map_loop
+$ endif
+$ if f$locate("}",line).lt. f$length(line) then proc = false
+$ if f$locate("local:", line) .lt. f$length(line) then proc = false
+$ if proc
+$ then
+$ shared_proc = f$edit(line,"collapse")
+$ chop_semi = f$locate(";", shared_proc)
+$ if chop_semi .lt. f$length(shared_proc) then -
+ shared_proc = f$extract(0, chop_semi, shared_proc)
+$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+ f$edit(shared_proc,"upcase"),shared_proc)
+$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$ endif
+$ goto map_loop
+$MAP_END:
+$ close/nolog aopt
+$ close/nolog bopt
+$ open/append libopt 'p2'
+$ open/read aopt a.opt
+$ open/read bopt b.opt
+$ALOOP:
+$ read/end=aloop_end aopt line
+$ write libopt line
+$ goto aloop
+$ALOOP_END:
+$ close/nolog aopt
+$ sv = ""
+$BLOOP:
+$ read/end=bloop_end bopt svn
+$ if (svn.nes."")
+$ then
+$ if (sv.nes."") then write libopt sv
+$ sv = svn
+$ endif
+$ goto bloop
+$BLOOP_END:
+$ write libopt f$extract(0,f$length(sv)-2,sv), "-"
+$ write libopt ")"
+$ close/nolog bopt
+$ delete/nolog/noconf a.opt;*,b.opt;*
+$ else
+$ if vax
+$ then
+$ open/append libopt 'p2'
+$ mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$ if f$type(module'mod_sym_num') .nes. ""
+$ then
+$ mod_in = 0
+$ VMOD_SYM_IN:
+$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$ if shared_proc .nes. "#"
+$ then
+$ write libopt f$fao("UNIVERSAL=!AS",-
+ f$edit(shared_proc,"upcase"))
+$ mod_in = mod_in + 1
+$ goto vmod_sym_in
+$ endif
+$ mod_sym_num = mod_sym_num + 1
+$ goto vmod_sym_loop
+$ endif
+$VMAP_LOOP:
+$ read/end=vmap_end map line
+$ if (f$locate("{",line).lt. f$length(line)) .or. -
+ (f$locate("global:", line) .lt. f$length(line))
+$ then
+$ proc = true
+$ goto vmap_loop
+$ endif
+$ if f$locate("}",line).lt. f$length(line) then proc = false
+$ if f$locate("local:", line) .lt. f$length(line) then proc = false
+$ if proc
+$ then
+$ shared_proc = f$edit(line,"collapse")
+$ chop_semi = f$locate(";", shared_proc)
+$ if chop_semi .lt. f$length(shared_proc) then -
+ shared_proc = f$extract(0, chop_semi, shared_proc)
+$ write libopt f$fao("UNIVERSAL=!AS",-
+ f$edit(shared_proc,"upcase"))
+$ endif
+$ goto vmap_loop
+$VMAP_END:
+$ else
+$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
+$ write sys$output "No options file created"
+$ endif
+$ endif
+$ EXIT_M2S:
+$ close/nolog map
+$ close/nolog libopt
+$ endsubroutine
--- /dev/null
+# Makefile for zlib
+# Borland C++
+# Last updated: 15-Mar-2003
+
+# To use, do "make -fmakefile.bor"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------ Turbo C++, Borland C++ ------------
+
+# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+# to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# memory model: one of s, m, c, l (small, medium, compact, large)
+MODEL=l
+
+# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
+CC=bcc
+LD=bcc
+AR=tlib
+
+# compiler flags
+# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
+CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
+
+LDFLAGS=-m$(MODEL) -f-
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del zlib_*.bak
+ -del foo.gz
--- /dev/null
+# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type:
+#
+# make -fmakefile.dj2; make test -fmakefile.dj2
+#
+# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
+#
+# make install -fmakefile.dj2
+#
+# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
+# in the sample below if the pattern of the DJGPP distribution is to
+# be followed. Remember that, while <sp>'es around <=> are ignored in
+# makefiles, they are *not* in batch files or in djgpp.env.
+# - - - - -
+# [make]
+# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
+# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
+# BUTT=-m486
+# - - - - -
+# Alternately, these variables may be defined below, overriding the values
+# in djgpp.env, as
+# INCLUDE_PATH=c:\usr\include
+# LIBRARY_PATH=c:\usr\lib
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+ -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+ uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+check: test
+test: all
+ ./example
+ echo hello world | .\minigzip | .\minigzip -d
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+
+%.exe : %.o $(LIBS)
+ $(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+ -@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+ -@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+ $(INSTALL) zlib.h $(INCLUDE_PATH)
+ $(INSTALL) zconf.h $(INCLUDE_PATH)
+ $(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+ $(RM) $(INCLUDE_PATH)\zlib.h
+ $(RM) $(INCLUDE_PATH)\zconf.h
+ $(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+ $(RM) *.d
+ $(RM) *.o
+ $(RM) *.exe
+ $(RM) libz.a
+ $(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
--- /dev/null
+# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type:
+#
+# make -fmakefile.emx; make test -fmakefile.emx
+#
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+ -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+ uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+ ./example
+ echo hello world | .\minigzip | .\minigzip -d
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+ $(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+ $(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+ $(RM) *.d
+ $(RM) *.o
+ $(RM) *.exe
+ $(RM) zlib.a
+ $(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
--- /dev/null
+# Makefile for zlib
+# Microsoft C 5.1 or later
+# Last updated: 19-Mar-2003
+
+# To use, do "make makefile.msc"
+# To compile in small model, set below: MODEL=S
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft C 5.1 and later -------------
+
+# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+# to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of S, M, C, L (small, medium, compact, large)
+MODEL=L
+
+CC=cl
+CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
+#-Ox generates bad code with MSC 5.1
+LIB_CFLAGS=-Zl $(CFLAGS)
+
+LD=link
+LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
+# "/farcall/packcode" are only useful for `large code' memory models
+# but should be a "no-op" for small code models.
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(LIB_CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+ $(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+ $(CC) -c $(CFLAGS) $*.c
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ if exist $(ZLIB_LIB) del $(ZLIB_LIB)
+ lib $(ZLIB_LIB) $(OBJ1);
+ lib $(ZLIB_LIB) $(OBJ2);
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del *.map
+ -del zlib_*.bak
+ -del foo.gz
--- /dev/null
+# Makefile for zlib
+# Turbo C 2.01, Turbo C++ 1.01
+# Last updated: 15-Mar-2003
+
+# To use, do "make -fmakefile.tc"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to CFLAGS below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------
+MODEL=l
+CC=tcc
+LD=tcc
+AR=tlib
+# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+CFLAGS=-O2 -G -Z -m$(MODEL)
+LDFLAGS=-m$(MODEL) -f-
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del zlib_*.bak
+ -del foo.gz
--- /dev/null
+#---------------------------------------------------------------------------------
+.SUFFIXES:
+#---------------------------------------------------------------------------------
+
+ifeq ($(strip $(DEVKITARM)),)
+$(error "Please set DEVKITARM in your environment. export DEVKITARM=<path to>devkitARM")
+endif
+
+include $(DEVKITARM)/ds_rules
+
+#---------------------------------------------------------------------------------
+# TARGET is the name of the output
+# BUILD is the directory where object files & intermediate files will be placed
+# SOURCES is a list of directories containing source code
+# DATA is a list of directories containing data files
+# INCLUDES is a list of directories containing header files
+#---------------------------------------------------------------------------------
+TARGET := $(shell basename $(CURDIR))
+BUILD := build
+SOURCES := ../../
+DATA := data
+INCLUDES := include
+
+#---------------------------------------------------------------------------------
+# options for code generation
+#---------------------------------------------------------------------------------
+ARCH := -mthumb -mthumb-interwork
+
+CFLAGS := -Wall -O2\
+ -march=armv5te -mtune=arm946e-s \
+ -fomit-frame-pointer -ffast-math \
+ $(ARCH)
+
+CFLAGS += $(INCLUDE) -DARM9
+CXXFLAGS := $(CFLAGS) -fno-rtti -fno-exceptions
+
+ASFLAGS := $(ARCH) -march=armv5te -mtune=arm946e-s
+LDFLAGS = -specs=ds_arm9.specs -g $(ARCH) -Wl,-Map,$(notdir $*.map)
+
+#---------------------------------------------------------------------------------
+# list of directories containing libraries, this must be the top level containing
+# include and lib
+#---------------------------------------------------------------------------------
+LIBDIRS := $(LIBNDS)
+
+#---------------------------------------------------------------------------------
+# no real need to edit anything past this point unless you need to add additional
+# rules for different file extensions
+#---------------------------------------------------------------------------------
+ifneq ($(BUILD),$(notdir $(CURDIR)))
+#---------------------------------------------------------------------------------
+
+export OUTPUT := $(CURDIR)/lib/libz.a
+
+export VPATH := $(foreach dir,$(SOURCES),$(CURDIR)/$(dir)) \
+ $(foreach dir,$(DATA),$(CURDIR)/$(dir))
+
+export DEPSDIR := $(CURDIR)/$(BUILD)
+
+CFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.c)))
+CPPFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.cpp)))
+SFILES := $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.s)))
+BINFILES := $(foreach dir,$(DATA),$(notdir $(wildcard $(dir)/*.*)))
+
+#---------------------------------------------------------------------------------
+# use CXX for linking C++ projects, CC for standard C
+#---------------------------------------------------------------------------------
+ifeq ($(strip $(CPPFILES)),)
+#---------------------------------------------------------------------------------
+ export LD := $(CC)
+#---------------------------------------------------------------------------------
+else
+#---------------------------------------------------------------------------------
+ export LD := $(CXX)
+#---------------------------------------------------------------------------------
+endif
+#---------------------------------------------------------------------------------
+
+export OFILES := $(addsuffix .o,$(BINFILES)) \
+ $(CPPFILES:.cpp=.o) $(CFILES:.c=.o) $(SFILES:.s=.o)
+
+export INCLUDE := $(foreach dir,$(INCLUDES),-I$(CURDIR)/$(dir)) \
+ $(foreach dir,$(LIBDIRS),-I$(dir)/include) \
+ -I$(CURDIR)/$(BUILD)
+
+.PHONY: $(BUILD) clean all
+
+#---------------------------------------------------------------------------------
+all: $(BUILD)
+ @[ -d $@ ] || mkdir -p include
+ @cp ../../*.h include
+
+lib:
+ @[ -d $@ ] || mkdir -p $@
+
+$(BUILD): lib
+ @[ -d $@ ] || mkdir -p $@
+ @$(MAKE) --no-print-directory -C $(BUILD) -f $(CURDIR)/Makefile
+
+#---------------------------------------------------------------------------------
+clean:
+ @echo clean ...
+ @rm -fr $(BUILD) lib
+
+#---------------------------------------------------------------------------------
+else
+
+DEPENDS := $(OFILES:.o=.d)
+
+#---------------------------------------------------------------------------------
+# main targets
+#---------------------------------------------------------------------------------
+$(OUTPUT) : $(OFILES)
+
+#---------------------------------------------------------------------------------
+%.bin.o : %.bin
+#---------------------------------------------------------------------------------
+ @echo $(notdir $<)
+ @$(bin2o)
+
+
+-include $(DEPENDS)
+
+#---------------------------------------------------------------------------------------
+endif
+#---------------------------------------------------------------------------------------
--- /dev/null
+This Makefile requires devkitARM (http://www.devkitpro.org/category/devkitarm/) and works inside "contrib/nds". It is based on a devkitARM template.
+
+Eduardo Costa <eduardo.m.costa@gmail.com>
+January 3, 2009
+
--- /dev/null
+# Makefile for zlib. Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type:
+#
+# make -fmakefile.emx; make test -fmakefile.emx
+#
+
+CC=gcc -Zwin32
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+ -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
+ gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+ ./example
+ echo hello world | .\minigzip | .\minigzip -d
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+ $(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+ $(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+ $(RM) *.d
+ $(RM) *.o
+ $(RM) *.exe
+ $(RM) zlib.a
+ $(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
--- /dev/null
+# Project: zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags =
+LibFileflags = -c -l -o $@
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+ @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+ @.o.uncompr @.o.zutil
+ LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+ @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+ @.o.trees @.o.uncompr @.o.zutil
+test: @.minigzip @.example @.lib
+ @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV
+ @echo running tests: hang on.
+ @/@.minigzip -f -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -f -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -1 libc
+ @/@.minigzip -d libc-gz
+ @diff @.lib @.libc
+ @echo that should have reported '@.lib and @.libc identical' if you have diff.
+ @/@.example @.fred @.fred
+ @echo that will have given lots of hello!'s.
+
+@.minigzip: @.o.minigzip @.lib C:o.Stubs
+ Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
+@.example: @.o.example @.lib C:o.Stubs
+ Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+ cdir $(libdest)
+ cdir $(libdest).h
+ @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+ @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+ @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV
+ @echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+ remove @.example
+ remove @.libc
+ -wipe @.o.* F~r~cV
+ remove @.fred
+
+# User-editable dependencies:
+.c.o:
+ cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example: c.example
+o.example: h.zlib
+o.example: h.zconf
+o.minigzip: c.minigzip
+o.minigzip: h.zlib
+o.minigzip: h.zconf
+o.adler32: c.adler32
+o.adler32: h.zlib
+o.adler32: h.zconf
+o.compress: c.compress
+o.compress: h.zlib
+o.compress: h.zconf
+o.crc32: c.crc32
+o.crc32: h.zlib
+o.crc32: h.zconf
+o.deflate: c.deflate
+o.deflate: h.deflate
+o.deflate: h.zutil
+o.deflate: h.zlib
+o.deflate: h.zconf
+o.gzio: c.gzio
+o.gzio: h.zutil
+o.gzio: h.zlib
+o.gzio: h.zconf
+o.infblock: c.infblock
+o.infblock: h.zutil
+o.infblock: h.zlib
+o.infblock: h.zconf
+o.infblock: h.infblock
+o.infblock: h.inftrees
+o.infblock: h.infcodes
+o.infblock: h.infutil
+o.infcodes: c.infcodes
+o.infcodes: h.zutil
+o.infcodes: h.zlib
+o.infcodes: h.zconf
+o.infcodes: h.inftrees
+o.infcodes: h.infblock
+o.infcodes: h.infcodes
+o.infcodes: h.infutil
+o.infcodes: h.inffast
+o.inffast: c.inffast
+o.inffast: h.zutil
+o.inffast: h.zlib
+o.inffast: h.zconf
+o.inffast: h.inftrees
+o.inffast: h.infblock
+o.inffast: h.infcodes
+o.inffast: h.infutil
+o.inffast: h.inffast
+o.inflate: c.inflate
+o.inflate: h.zutil
+o.inflate: h.zlib
+o.inflate: h.zconf
+o.inflate: h.infblock
+o.inftrees: c.inftrees
+o.inftrees: h.zutil
+o.inftrees: h.zlib
+o.inftrees: h.zconf
+o.inftrees: h.inftrees
+o.inftrees: h.inffixed
+o.infutil: c.infutil
+o.infutil: h.zutil
+o.infutil: h.zlib
+o.infutil: h.zconf
+o.infutil: h.infblock
+o.infutil: h.inftrees
+o.infutil: h.infcodes
+o.infutil: h.infutil
+o.trees: c.trees
+o.trees: h.deflate
+o.trees: h.zutil
+o.trees: h.zlib
+o.trees: h.zconf
+o.trees: h.trees
+o.uncompr: c.uncompr
+o.uncompr: h.zlib
+o.uncompr: h.zconf
+o.zutil: c.zutil
+o.zutil: h.zutil
+o.zutil: h.zlib
+o.zutil: h.zconf
--- /dev/null
+This directory contains files that have not been updated for zlib 1.2.x
+
+(Volunteers are encouraged to help clean this up. Thanks.)
--- /dev/null
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser <m.zinser@gsi.de>
+
+cc_defs =
+c_deb =
+
+.ifdef __DECC__
+pref = /prefix=all
+.endif
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
+ inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
+
+CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
+
+all : example.exe minigzip.exe
+ @ write sys$output " Example applications available"
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*
+
+
+# Other dependencies.
+adler32.obj : zutil.h zlib.h zconf.h
+compress.obj : zlib.h zconf.h
+crc32.obj : zutil.h zlib.h zconf.h
+deflate.obj : deflate.h zutil.h zlib.h zconf.h
+example.obj : zlib.h zconf.h
+gzio.obj : zutil.h zlib.h zconf.h
+infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.obj : zutil.h zlib.h zconf.h infblock.h
+inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
+infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.obj : zlib.h zconf.h
+trees.obj : deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : zlib.h zconf.h
+zutil.obj : zutil.h zlib.h zconf.h
--- /dev/null
+# Makefile for zlib under OS/2 using GCC (PGCC)
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# cp Makefile.os2 ..
+# cd ..
+# make -f Makefile.os2 test
+
+# This makefile will build a static library z.lib, a shared library
+# z.dll and a import library zdll.lib. You can use either z.lib or
+# zdll.lib by specifying either -lz or -lzdll on gcc's command line
+
+CC=gcc -Zomf -s
+
+CFLAGS=-O6 -Wall
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+#################### BUG WARNING: #####################
+## infcodes.c hits a bug in pgcc-1.0, so you have to use either
+## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
+## This bug is reportedly fixed in pgcc >1.0, but this was not tested
+CFLAGS+=-fno-force-mem
+
+LDFLAGS=-s -L. -lzdll -Zcrtdll
+LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
+
+VER=1.1.0
+ZLIB=z.lib
+SHAREDLIB=z.dll
+SHAREDLIBIMP=zdll.lib
+LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
+
+AR=emxomfar cr
+IMPLIB=emximp
+RANLIB=echo
+TAR=tar
+SHELL=bash
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+ algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+ nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \
+ contrib/asm386/*.asm contrib/asm386/*.c \
+ contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+ contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \
+ contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+
+all: example.exe minigzip.exe
+
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+$(ZLIB): $(OBJS)
+ $(AR) $@ $(OBJS)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+$(SHAREDLIB): $(OBJS) os2/z.def
+ $(LDSHARED) -o $@ $^
+
+$(SHAREDLIBIMP): os2/z.def
+ $(IMPLIB) -o $@ $^
+
+example.exe: example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip.exe: minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+clean:
+ rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+
+distclean: clean
+
+zip:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c
+ v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ zip -ul9 zlib$$v $(DISTFILES)
+ mv Makefile~ Makefile
+
+dist:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c
+ d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ rm -f $$d.tar.gz; \
+ if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+ files=""; \
+ for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+ cd ..; \
+ GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+ if test ! -d $$d; then rm -f $$d; fi
+ mv Makefile~ Makefile
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+;
+; Slightly modified version of ../nt/zlib.dnt :-)
+;
+
+LIBRARY Z
+DESCRIPTION "Zlib compression library for OS/2"
+CODE PRELOAD MOVEABLE DISCARDABLE
+DATA PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+ adler32
+ compress
+ crc32
+ deflate
+ deflateCopy
+ deflateEnd
+ deflateInit2_
+ deflateInit_
+ deflateParams
+ deflateReset
+ deflateSetDictionary
+ gzclose
+ gzdopen
+ gzerror
+ gzflush
+ gzopen
+ gzread
+ gzwrite
+ inflate
+ inflateEnd
+ inflateInit2_
+ inflateInit_
+ inflateReset
+ inflateSetDictionary
+ inflateSync
+ uncompress
+ zlibVersion
+ gzprintf
+ gzputc
+ gzgetc
+ gzseek
+ gzrewind
+ gztell
+ gzeof
+ gzsetparams
+ zError
+ inflateSyncPoint
+ get_crc_table
+ compress2
+ gzputs
+ gzgets
--- /dev/null
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+ room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+ reference ("as any"), not by value ("as long"). Also check that
+ before the call of compress this length is equal to the total size of
+ the compressed buffer and not zero.
+
+
+From: "Jon Caruana" <jon-net@usa.net>
+Subject: Re: How to port zlib declares to vb?
+Date: Mon, 28 Oct 1996 18:33:03 -0600
+
+Got the answer! (I haven't had time to check this but it's what I got, and
+looks correct):
+
+He has the following routines working:
+ compress
+ uncompress
+ gzopen
+ gzwrite
+ gzread
+ gzclose
+
+Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
+
+#If Win16 Then 'Use Win16 calls.
+Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
+ String, comprLen As Any, ByVal buf As String, ByVal buflen
+ As Long) As Integer
+Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
+ As String, uncomprLen As Any, ByVal compr As String, ByVal
+ lcompr As Long) As Integer
+Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
+ String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
+ Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+ As Integer
+Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
+ Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+ As Integer
+Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
+ Long) As Integer
+#Else
+Declare Function compress Lib "ZLIB32.DLL"
+ (ByVal compr As String, comprLen As Any, ByVal buf As
+ String, ByVal buflen As Long) As Integer
+Declare Function uncompress Lib "ZLIB32.DLL"
+ (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
+ String, ByVal lcompr As Long) As Long
+Declare Function gzopen Lib "ZLIB32.DLL"
+ (ByVal file As String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB32.DLL"
+ (ByVal file As Long, ByVal uncompr As String, ByVal
+ uncomprLen As Long) As Long
+Declare Function gzwrite Lib "ZLIB32.DLL"
+ (ByVal file As Long, ByVal uncompr As String, ByVal
+ uncomprLen As Long) As Long
+Declare Function gzclose Lib "ZLIB32.DLL"
+ (ByVal file As Long) As Long
+#End If
+
+-Jon Caruana
+jon-net@usa.net
+Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
+
+
+Here is another example from Michael <michael_borgsys@hotmail.com> that he
+says conforms to the VB guidelines, and that solves the problem of not
+knowing the uncompressed size by storing it at the end of the file:
+
+'Calling the functions:
+'bracket meaning: <parameter> [optional] {Range of possible values}
+'Call subCompressFile(<path with filename to compress> [, <path with
+filename to write to>, [level of compression {1..9}]])
+'Call subUncompressFile(<path with filename to compress>)
+
+Option Explicit
+Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
+Private Const SUCCESS As Long = 0
+Private Const strFilExt As String = ".cpr"
+Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
+dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
+ByVal level As Integer) As Long
+Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
+dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
+As Long
+
+Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
+strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
+ Dim strCprPth As String
+ Dim lngOriSiz As Long
+ Dim lngCprSiz As Long
+ Dim bytaryOri() As Byte
+ Dim bytaryCpr() As Byte
+ lngOriSiz = FileLen(strargOriFilPth)
+ ReDim bytaryOri(lngOriSiz - 1)
+ Open strargOriFilPth For Binary Access Read As #1
+ Get #1, , bytaryOri()
+ Close #1
+ strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
+'Select file path and name
+ strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
+strFilExt, "", strFilExt) 'Add file extension if not exists
+ lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
+more space then original file size
+ ReDim bytaryCpr(lngCprSiz - 1)
+ If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
+SUCCESS Then
+ lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
+ ReDim Preserve bytaryCpr(lngCprSiz - 1)
+ Open strCprPth For Binary Access Write As #1
+ Put #1, , bytaryCpr()
+ Put #1, , lngOriSiz 'Add the the original size value to the end
+(last 4 bytes)
+ Close #1
+ Else
+ MsgBox "Compression error"
+ End If
+ Erase bytaryCpr
+ Erase bytaryOri
+End Sub
+
+Public Sub subUncompressFile(ByVal strargFilPth As String)
+ Dim bytaryCpr() As Byte
+ Dim bytaryOri() As Byte
+ Dim lngOriSiz As Long
+ Dim lngCprSiz As Long
+ Dim strOriPth As String
+ lngCprSiz = FileLen(strargFilPth)
+ ReDim bytaryCpr(lngCprSiz - 1)
+ Open strargFilPth For Binary Access Read As #1
+ Get #1, , bytaryCpr()
+ Close #1
+ 'Read the original file size value:
+ lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
+ + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
+ + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
+ + bytaryCpr(lngCprSiz - 4)
+ ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
+ ReDim bytaryOri(lngOriSiz - 1)
+ If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
+Then
+ strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
+ Open strOriPth For Binary Access Write As #1
+ Put #1, , bytaryOri()
+ Close #1
+ Else
+ MsgBox "Uncompression error"
+ End If
+ Erase bytaryCpr
+ Erase bytaryOri
+End Sub
+Public Property Get lngPercentSmaller() As Long
+ lngPercentSmaller = lngpvtPcnSml
+End Property
--- /dev/null
+<QPG:Generation>
+ <QPG:Options>
+ <QPG:User unattended="no" verbosity="2" listfiles="yes"/>
+ <QPG:Defaults type="qnx_package"/>
+ <QPG:Source></QPG:Source>
+ <QPG:Release number="+"/>
+ <QPG:Build></QPG:Build>
+ <QPG:FileSorting strip="yes"/>
+ <QPG:Package targets="combine"/>
+ <QPG:Repository generate="yes"/>
+ <QPG:FinalDir></QPG:FinalDir>
+ <QPG:Cleanup></QPG:Cleanup>
+ </QPG:Options>
+
+ <QPG:Responsible>
+ <QPG:Company></QPG:Company>
+ <QPG:Department></QPG:Department>
+ <QPG:Group></QPG:Group>
+ <QPG:Team></QPG:Team>
+ <QPG:Employee></QPG:Employee>
+ <QPG:EmailAddress></QPG:EmailAddress>
+ </QPG:Responsible>
+
+ <QPG:Values>
+ <QPG:Files>
+ <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
+ <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
+ <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" user="root:bin" permission="644"/>
+ <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.8"/>
+ <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.8"/>
+ <QPG:Add file="../libz.so.1.2.8" install="/opt/lib/" component="slib"/>
+ </QPG:Files>
+
+ <QPG:PackageFilter>
+ <QPM:PackageManifest>
+ <QPM:PackageDescription>
+ <QPM:PackageType>Library</QPM:PackageType>
+ <QPM:PackageReleaseNotes></QPM:PackageReleaseNotes>
+ <QPM:PackageReleaseUrgency>Medium</QPM:PackageReleaseUrgency>
+ <QPM:PackageRepository></QPM:PackageRepository>
+ <QPM:FileVersion>2.0</QPM:FileVersion>
+ </QPM:PackageDescription>
+
+ <QPM:ProductDescription>
+ <QPM:ProductName>zlib</QPM:ProductName>
+ <QPM:ProductIdentifier>zlib</QPM:ProductIdentifier>
+ <QPM:ProductEmail>alain.bonnefoy@icbt.com</QPM:ProductEmail>
+ <QPM:VendorName>Public</QPM:VendorName>
+ <QPM:VendorInstallName>public</QPM:VendorInstallName>
+ <QPM:VendorURL>www.gzip.org/zlib</QPM:VendorURL>
+ <QPM:VendorEmbedURL></QPM:VendorEmbedURL>
+ <QPM:VendorEmail></QPM:VendorEmail>
+ <QPM:AuthorName>Jean-Loup Gailly,Mark Adler</QPM:AuthorName>
+ <QPM:AuthorURL>www.gzip.org/zlib</QPM:AuthorURL>
+ <QPM:AuthorEmbedURL></QPM:AuthorEmbedURL>
+ <QPM:AuthorEmail>zlib@gzip.org</QPM:AuthorEmail>
+ <QPM:ProductIconSmall></QPM:ProductIconSmall>
+ <QPM:ProductIconLarge></QPM:ProductIconLarge>
+ <QPM:ProductDescriptionShort>A massively spiffy yet delicately unobtrusive compression library.</QPM:ProductDescriptionShort>
+ <QPM:ProductDescriptionLong>zlib is designed to be a free, general-purpose, legally unencumbered, lossless data compression library for use on virtually any computer hardware and operating system.</QPM:ProductDescriptionLong>
+ <QPM:ProductDescriptionURL>http://www.gzip.org/zlib</QPM:ProductDescriptionURL>
+ <QPM:ProductDescriptionEmbedURL></QPM:ProductDescriptionEmbedURL>
+ </QPM:ProductDescription>
+
+ <QPM:ReleaseDescription>
+ <QPM:ReleaseVersion>1.2.8</QPM:ReleaseVersion>
+ <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
+ <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
+ <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
+ <QPM:ReleaseNoteMajor></QPM:ReleaseNoteMajor>
+ <QPM:ExcludeCountries>
+ <QPM:Country></QPM:Country>
+ </QPM:ExcludeCountries>
+
+ <QPM:ReleaseCopyright>No License</QPM:ReleaseCopyright>
+ </QPM:ReleaseDescription>
+
+ <QPM:ContentDescription>
+ <QPM:ContentTopic xmlmultiple="true">Software Development/Libraries and Extensions/C Libraries</QPM:ContentTopic>
+ <QPM:ContentKeyword>zlib,compression</QPM:ContentKeyword>
+ <QPM:TargetOS>qnx6</QPM:TargetOS>
+ <QPM:HostOS>qnx6</QPM:HostOS>
+ <QPM:DisplayEnvironment xmlmultiple="true">None</QPM:DisplayEnvironment>
+ <QPM:TargetAudience xmlmultiple="true">Developer</QPM:TargetAudience>
+ </QPM:ContentDescription>
+ </QPM:PackageManifest>
+ </QPG:PackageFilter>
+
+ <QPG:PackageFilter proc="none" target="none">
+ <QPM:PackageManifest>
+ <QPM:ProductInstallationDependencies>
+ <QPM:ProductRequirements></QPM:ProductRequirements>
+ </QPM:ProductInstallationDependencies>
+
+ <QPM:ProductInstallationProcedure>
+ <QPM:Script xmlmultiple="true">
+ <QPM:ScriptName></QPM:ScriptName>
+ <QPM:ScriptType>Install</QPM:ScriptType>
+ <QPM:ScriptTiming>Post</QPM:ScriptTiming>
+ <QPM:ScriptBlocking>No</QPM:ScriptBlocking>
+ <QPM:ScriptResult>Ignore</QPM:ScriptResult>
+ <QPM:ShortDescription></QPM:ShortDescription>
+ <QPM:UseBinaries>No</QPM:UseBinaries>
+ <QPM:Priority>Optional</QPM:Priority>
+ </QPM:Script>
+ </QPM:ProductInstallationProcedure>
+ </QPM:PackageManifest>
+
+ <QPM:Launch>
+ </QPM:Launch>
+ </QPG:PackageFilter>
+
+ <QPG:PackageFilter type="core" component="none">
+ <QPM:PackageManifest>
+ <QPM:ProductInstallationProcedure>
+ <QPM:OrderDependency xmlmultiple="true">
+ <QPM:Order>InstallOver</QPM:Order>
+ <QPM:Product>zlib</QPM:Product>
+ </QPM:OrderDependency>
+ </QPM:ProductInstallationProcedure>
+ </QPM:PackageManifest>
+
+ <QPM:Launch>
+ </QPM:Launch>
+ </QPG:PackageFilter>
+
+ <QPG:PackageFilter type="core" component="dev">
+ <QPM:PackageManifest>
+ <QPM:ProductInstallationProcedure>
+ <QPM:OrderDependency xmlmultiple="true">
+ <QPM:Order>InstallOver</QPM:Order>
+ <QPM:Product>zlib-dev</QPM:Product>
+ </QPM:OrderDependency>
+ </QPM:ProductInstallationProcedure>
+ </QPM:PackageManifest>
+
+ <QPM:Launch>
+ </QPM:Launch>
+ </QPG:PackageFilter>
+ </QPG:Values>
+</QPG:Generation>
--- /dev/null
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+# define TESTFILE "foo-gz"
+#else
+# define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+ if (err != Z_OK) { \
+ fprintf(stderr, "%s error: %d\n", msg, err); \
+ exit(1); \
+ } \
+}
+
+z_const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+const char dictionary[] = "hello";
+uLong dictId; /* Adler32 value of the dictionary */
+
+void test_deflate OF((Byte *compr, uLong comprLen));
+void test_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_flush OF((Byte *compr, uLong *comprLen));
+void test_sync OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate OF((Byte *compr, uLong comprLen));
+void test_dict_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+int main OF((int argc, char *argv[]));
+
+
+#ifdef Z_SOLO
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ q = Z_NULL;
+ return calloc(n, m);
+}
+
+void myfree(void *q, void *p)
+{
+ q = Z_NULL;
+ free(p);
+}
+
+static alloc_func zalloc = myalloc;
+static free_func zfree = myfree;
+
+#else /* !Z_SOLO */
+
+static alloc_func zalloc = (alloc_func)0;
+static free_func zfree = (free_func)0;
+
+void test_compress OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_gzio OF((const char *fname,
+ Byte *uncompr, uLong uncomprLen));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ err = compress(compr, &comprLen, (const Bytef*)hello, len);
+ CHECK_ERR(err, "compress");
+
+ strcpy((char*)uncompr, "garbage");
+
+ err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+ CHECK_ERR(err, "uncompress");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad uncompress\n");
+ exit(1);
+ } else {
+ printf("uncompress(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(fname, uncompr, uncomprLen)
+ const char *fname; /* compressed file name */
+ Byte *uncompr;
+ uLong uncomprLen;
+{
+#ifdef NO_GZCOMPRESS
+ fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
+#else
+ int err;
+ int len = (int)strlen(hello)+1;
+ gzFile file;
+ z_off_t pos;
+
+ file = gzopen(fname, "wb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ gzputc(file, 'h');
+ if (gzputs(file, "ello") != 4) {
+ fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (gzprintf(file, ", %s!", "hello") != 8) {
+ fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+ gzclose(file);
+
+ file = gzopen(fname, "rb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ strcpy((char*)uncompr, "garbage");
+
+ if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
+ fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+ exit(1);
+ } else {
+ printf("gzread(): %s\n", (char*)uncompr);
+ }
+
+ pos = gzseek(file, -8L, SEEK_CUR);
+ if (pos != 6 || gztell(file) != pos) {
+ fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+ (long)pos, (long)gztell(file));
+ exit(1);
+ }
+
+ if (gzgetc(file) != ' ') {
+ fprintf(stderr, "gzgetc error\n");
+ exit(1);
+ }
+
+ if (gzungetc(' ', file) != ' ') {
+ fprintf(stderr, "gzungetc error\n");
+ exit(1);
+ }
+
+ gzgets(file, (char*)uncompr, (int)uncomprLen);
+ if (strlen((char*)uncompr) != 7) { /* " hello!" */
+ fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello + 6)) {
+ fprintf(stderr, "bad gzgets after gzseek\n");
+ exit(1);
+ } else {
+ printf("gzgets() after gzseek: %s\n", (char*)uncompr);
+ }
+
+ gzclose(file);
+#endif
+}
+
+#endif /* Z_SOLO */
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.next_out = compr;
+
+ while (c_stream.total_in != len && c_stream.total_out < comprLen) {
+ c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ }
+ /* Finish the stream, still forcing small buffers: */
+ for (;;) {
+ c_stream.avail_out = 1;
+ err = deflate(&c_stream, Z_FINISH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "deflate");
+ }
+
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 0;
+ d_stream.next_out = uncompr;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+ d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate\n");
+ exit(1);
+ } else {
+ printf("inflate(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ /* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ */
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ if (c_stream.avail_in != 0) {
+ fprintf(stderr, "deflate not greedy\n");
+ exit(1);
+ }
+
+ /* Feed in already compressed data and switch to no compression: */
+ deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in = compr;
+ c_stream.avail_in = (uInt)comprLen/2;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ /* Switch back to compressing mode: */
+ deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ for (;;) {
+ d_stream.next_out = uncompr; /* discard the output */
+ d_stream.avail_out = (uInt)uncomprLen;
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "large inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+ fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+ exit(1);
+ } else {
+ printf("large_inflate(): OK\n");
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+ Byte *compr;
+ uLong *comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uInt len = (uInt)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.next_out = compr;
+ c_stream.avail_in = 3;
+ c_stream.avail_out = (uInt)*comprLen;
+ err = deflate(&c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ compr[3]++; /* force an error in first compressed block */
+ c_stream.avail_in = len - 3;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ CHECK_ERR(err, "deflate");
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+
+ *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 2; /* just read the zlib header */
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ inflate(&d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "inflate");
+
+ d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
+ err = inflateSync(&d_stream); /* but skip the damaged part */
+ CHECK_ERR(err, "inflateSync");
+
+ err = inflate(&d_stream, Z_FINISH);
+ if (err != Z_DATA_ERROR) {
+ fprintf(stderr, "inflate should report DATA_ERROR\n");
+ /* Because of incorrect adler32 */
+ exit(1);
+ }
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ err = deflateSetDictionary(&c_stream,
+ (const Bytef*)dictionary, (int)sizeof(dictionary));
+ CHECK_ERR(err, "deflateSetDictionary");
+
+ dictId = c_stream.adler;
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.avail_in = (uInt)strlen(hello)+1;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ for (;;) {
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ if (err == Z_NEED_DICT) {
+ if (d_stream.adler != dictId) {
+ fprintf(stderr, "unexpected dictionary");
+ exit(1);
+ }
+ err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+ (int)sizeof(dictionary));
+ }
+ CHECK_ERR(err, "inflate with dict");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate with dict\n");
+ exit(1);
+ } else {
+ printf("inflate with dictionary: %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Usage: example [output.gz [input.gz]]
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ Byte *compr, *uncompr;
+ uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+ uLong uncomprLen = comprLen;
+ static const char* myVersion = ZLIB_VERSION;
+
+ if (zlibVersion()[0] != myVersion[0]) {
+ fprintf(stderr, "incompatible zlib version\n");
+ exit(1);
+
+ } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+ fprintf(stderr, "warning: different zlib version\n");
+ }
+
+ printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
+ ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
+
+ compr = (Byte*)calloc((uInt)comprLen, 1);
+ uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
+ /* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ */
+ if (compr == Z_NULL || uncompr == Z_NULL) {
+ printf("out of memory\n");
+ exit(1);
+ }
+
+#ifdef Z_SOLO
+ argc = strlen(argv[0]);
+#else
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+
+ test_gzio((argc > 1 ? argv[1] : TESTFILE),
+ uncompr, uncomprLen);
+#endif
+
+ test_deflate(compr, comprLen);
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_flush(compr, &comprLen);
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ comprLen = uncomprLen;
+
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ free(compr);
+ free(uncompr);
+
+ return 0;
+}
--- /dev/null
+/* infcover.c -- test zlib's inflate routines with full code coverage
+ * Copyright (C) 2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* to use, do: ./configure --cover && make cover */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+/* get definition of internal structure so we can mess with it (see pull()),
+ and so we can call inflate_trees() (see cover5()) */
+#define ZLIB_INTERNAL
+#include "inftrees.h"
+#include "inflate.h"
+
+#define local static
+
+/* -- memory tracking routines -- */
+
+/*
+ These memory tracking routines are provided to zlib and track all of zlib's
+ allocations and deallocations, check for LIFO operations, keep a current
+ and high water mark of total bytes requested, optionally set a limit on the
+ total memory that can be allocated, and when done check for memory leaks.
+
+ They are used as follows:
+
+ z_stream strm;
+ mem_setup(&strm) initializes the memory tracking and sets the
+ zalloc, zfree, and opaque members of strm to use
+ memory tracking for all zlib operations on strm
+ mem_limit(&strm, limit) sets a limit on the total bytes requested -- a
+ request that exceeds this limit will result in an
+ allocation failure (returns NULL) -- setting the
+ limit to zero means no limit, which is the default
+ after mem_setup()
+ mem_used(&strm, "msg") prints to stderr "msg" and the total bytes used
+ mem_high(&strm, "msg") prints to stderr "msg" and the high water mark
+ mem_done(&strm, "msg") ends memory tracking, releases all allocations
+ for the tracking as well as leaked zlib blocks, if
+ any. If there was anything unusual, such as leaked
+ blocks, non-FIFO frees, or frees of addresses not
+ allocated, then "msg" and information about the
+ problem is printed to stderr. If everything is
+ normal, nothing is printed. mem_done resets the
+ strm members to Z_NULL to use the default memory
+ allocation routines on the next zlib initialization
+ using strm.
+ */
+
+/* these items are strung together in a linked list, one for each allocation */
+struct mem_item {
+ void *ptr; /* pointer to allocated memory */
+ size_t size; /* requested size of allocation */
+ struct mem_item *next; /* pointer to next item in list, or NULL */
+};
+
+/* this structure is at the root of the linked list, and tracks statistics */
+struct mem_zone {
+ struct mem_item *first; /* pointer to first item in list, or NULL */
+ size_t total, highwater; /* total allocations, and largest total */
+ size_t limit; /* memory allocation limit, or 0 if no limit */
+ int notlifo, rogue; /* counts of non-LIFO frees and rogue frees */
+};
+
+/* memory allocation routine to pass to zlib */
+local void *mem_alloc(void *mem, unsigned count, unsigned size)
+{
+ void *ptr;
+ struct mem_item *item;
+ struct mem_zone *zone = mem;
+ size_t len = count * (size_t)size;
+
+ /* induced allocation failure */
+ if (zone == NULL || (zone->limit && zone->total + len > zone->limit))
+ return NULL;
+
+ /* perform allocation using the standard library, fill memory with a
+ non-zero value to make sure that the code isn't depending on zeros */
+ ptr = malloc(len);
+ if (ptr == NULL)
+ return NULL;
+ memset(ptr, 0xa5, len);
+
+ /* create a new item for the list */
+ item = malloc(sizeof(struct mem_item));
+ if (item == NULL) {
+ free(ptr);
+ return NULL;
+ }
+ item->ptr = ptr;
+ item->size = len;
+
+ /* insert item at the beginning of the list */
+ item->next = zone->first;
+ zone->first = item;
+
+ /* update the statistics */
+ zone->total += item->size;
+ if (zone->total > zone->highwater)
+ zone->highwater = zone->total;
+
+ /* return the allocated memory */
+ return ptr;
+}
+
+/* memory free routine to pass to zlib */
+local void mem_free(void *mem, void *ptr)
+{
+ struct mem_item *item, *next;
+ struct mem_zone *zone = mem;
+
+ /* if no zone, just do a free */
+ if (zone == NULL) {
+ free(ptr);
+ return;
+ }
+
+ /* point next to the item that matches ptr, or NULL if not found -- remove
+ the item from the linked list if found */
+ next = zone->first;
+ if (next) {
+ if (next->ptr == ptr)
+ zone->first = next->next; /* first one is it, remove from list */
+ else {
+ do { /* search the linked list */
+ item = next;
+ next = item->next;
+ } while (next != NULL && next->ptr != ptr);
+ if (next) { /* if found, remove from linked list */
+ item->next = next->next;
+ zone->notlifo++; /* not a LIFO free */
+ }
+
+ }
+ }
+
+ /* if found, update the statistics and free the item */
+ if (next) {
+ zone->total -= next->size;
+ free(next);
+ }
+
+ /* if not found, update the rogue count */
+ else
+ zone->rogue++;
+
+ /* in any case, do the requested free with the standard library function */
+ free(ptr);
+}
+
+/* set up a controlled memory allocation space for monitoring, set the stream
+ parameters to the controlled routines, with opaque pointing to the space */
+local void mem_setup(z_stream *strm)
+{
+ struct mem_zone *zone;
+
+ zone = malloc(sizeof(struct mem_zone));
+ assert(zone != NULL);
+ zone->first = NULL;
+ zone->total = 0;
+ zone->highwater = 0;
+ zone->limit = 0;
+ zone->notlifo = 0;
+ zone->rogue = 0;
+ strm->opaque = zone;
+ strm->zalloc = mem_alloc;
+ strm->zfree = mem_free;
+}
+
+/* set a limit on the total memory allocation, or 0 to remove the limit */
+local void mem_limit(z_stream *strm, size_t limit)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ zone->limit = limit;
+}
+
+/* show the current total requested allocations in bytes */
+local void mem_used(z_stream *strm, char *prefix)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total);
+}
+
+/* show the high water allocation in bytes */
+local void mem_high(z_stream *strm, char *prefix)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater);
+}
+
+/* release the memory allocation zone -- if there are any surprises, notify */
+local void mem_done(z_stream *strm, char *prefix)
+{
+ int count = 0;
+ struct mem_item *item, *next;
+ struct mem_zone *zone = strm->opaque;
+
+ /* show high water mark */
+ mem_high(strm, prefix);
+
+ /* free leftover allocations and item structures, if any */
+ item = zone->first;
+ while (item != NULL) {
+ free(item->ptr);
+ next = item->next;
+ free(item);
+ item = next;
+ count++;
+ }
+
+ /* issue alerts about anything unexpected */
+ if (count || zone->total)
+ fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n",
+ prefix, zone->total, count);
+ if (zone->notlifo)
+ fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo);
+ if (zone->rogue)
+ fprintf(stderr, "** %s: %d frees not recognized\n",
+ prefix, zone->rogue);
+
+ /* free the zone and delete from the stream */
+ free(zone);
+ strm->opaque = Z_NULL;
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+}
+
+/* -- inflate test routines -- */
+
+/* Decode a hexadecimal string, set *len to length, in[] to the bytes. This
+ decodes liberally, in that hex digits can be adjacent, in which case two in
+ a row writes a byte. Or they can delimited by any non-hex character, where
+ the delimiters are ignored except when a single hex digit is followed by a
+ delimiter in which case that single digit writes a byte. The returned
+ data is allocated and must eventually be freed. NULL is returned if out of
+ memory. If the length is not needed, then len can be NULL. */
+local unsigned char *h2b(const char *hex, unsigned *len)
+{
+ unsigned char *in;
+ unsigned next, val;
+
+ in = malloc((strlen(hex) + 1) >> 1);
+ if (in == NULL)
+ return NULL;
+ next = 0;
+ val = 1;
+ do {
+ if (*hex >= '0' && *hex <= '9')
+ val = (val << 4) + *hex - '0';
+ else if (*hex >= 'A' && *hex <= 'F')
+ val = (val << 4) + *hex - 'A' + 10;
+ else if (*hex >= 'a' && *hex <= 'f')
+ val = (val << 4) + *hex - 'a' + 10;
+ else if (val != 1 && val < 32) /* one digit followed by delimiter */
+ val += 240; /* make it look like two digits */
+ if (val > 255) { /* have two digits */
+ in[next++] = val & 0xff; /* save the decoded byte */
+ val = 1; /* start over */
+ }
+ } while (*hex++); /* go through the loop with the terminating null */
+ if (len != NULL)
+ *len = next;
+ in = reallocf(in, next);
+ return in;
+}
+
+/* generic inflate() run, where hex is the hexadecimal input data, what is the
+ text to include in an error message, step is how much input data to feed
+ inflate() on each call, or zero to feed it all, win is the window bits
+ parameter to inflateInit2(), len is the size of the output buffer, and err
+ is the error code expected from the first inflate() call (the second
+ inflate() call is expected to return Z_STREAM_END). If win is 47, then
+ header information is collected with inflateGetHeader(). If a zlib stream
+ is looking for a dictionary, then an empty dictionary is provided.
+ inflate() is run until all of the input data is consumed. */
+local void inf(char *hex, char *what, unsigned step, int win, unsigned len,
+ int err)
+{
+ int ret;
+ unsigned have;
+ unsigned char *in, *out;
+ z_stream strm, copy;
+ gz_header head;
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, win);
+ if (ret != Z_OK) {
+ mem_done(&strm, what);
+ return;
+ }
+ out = malloc(len); assert(out != NULL);
+ if (win == 47) {
+ head.extra = out;
+ head.extra_max = len;
+ head.name = out;
+ head.name_max = len;
+ head.comment = out;
+ head.comm_max = len;
+ ret = inflateGetHeader(&strm, &head); assert(ret == Z_OK);
+ }
+ in = h2b(hex, &have); assert(in != NULL);
+ if (step == 0 || step > have)
+ step = have;
+ strm.avail_in = step;
+ have -= step;
+ strm.next_in = in;
+ do {
+ strm.avail_out = len;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_NO_FLUSH); assert(err == 9 || ret == err);
+ if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT)
+ break;
+ if (ret == Z_NEED_DICT) {
+ ret = inflateSetDictionary(&strm, in, 1);
+ assert(ret == Z_DATA_ERROR);
+ mem_limit(&strm, 1);
+ ret = inflateSetDictionary(&strm, out, 0);
+ assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ ((struct inflate_state *)strm.state)->mode = DICT;
+ ret = inflateSetDictionary(&strm, out, 0);
+ assert(ret == Z_OK);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_BUF_ERROR);
+ }
+ ret = inflateCopy(©, &strm); assert(ret == Z_OK);
+ ret = inflateEnd(©); assert(ret == Z_OK);
+ err = 9; /* don't care next time around */
+ have += strm.avail_in;
+ strm.avail_in = step > have ? have : step;
+ have -= strm.avail_in;
+ } while (strm.avail_in);
+ free(in);
+ free(out);
+ ret = inflateReset2(&strm, -8); assert(ret == Z_OK);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, what);
+}
+
+/* cover all of the lines in inflate.c up to inflate() */
+local void cover_support(void)
+{
+ int ret;
+ z_stream strm;
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm); assert(ret == Z_OK);
+ mem_used(&strm, "inflate init");
+ ret = inflatePrime(&strm, 5, 31); assert(ret == Z_OK);
+ ret = inflatePrime(&strm, -1, 0); assert(ret == Z_OK);
+ ret = inflateSetDictionary(&strm, Z_NULL, 0);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "prime");
+
+ inf("63 0", "force window allocation", 0, -15, 1, Z_OK);
+ inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK);
+ inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK);
+ inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END);
+ inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR);
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream));
+ assert(ret == Z_VERSION_ERROR);
+ mem_done(&strm, "wrong version");
+
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm); assert(ret == Z_OK);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ fputs("inflate built-in memory routines\n", stderr);
+}
+
+/* cover all inflate() header and trailer cases and code after inflate() */
+local void cover_wrap(void)
+{
+ int ret;
+ z_stream strm, copy;
+ unsigned char dict[257];
+
+ ret = inflate(Z_NULL, 0); assert(ret == Z_STREAM_ERROR);
+ ret = inflateEnd(Z_NULL); assert(ret == Z_STREAM_ERROR);
+ ret = inflateCopy(Z_NULL, Z_NULL); assert(ret == Z_STREAM_ERROR);
+ fputs("inflate bad parameters\n", stderr);
+
+ inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR);
+ inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR);
+ inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR);
+ inf("8 99", "set window size from header", 0, 0, 0, Z_OK);
+ inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR);
+ inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END);
+ inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1,
+ Z_DATA_ERROR);
+ inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length",
+ 0, 47, 0, Z_STREAM_END);
+ inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR);
+ inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT);
+ inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK);
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -8);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x63";
+ strm.avail_out = 1;
+ strm.next_out = (void *)&ret;
+ mem_limit(&strm, 1);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ memset(dict, 0, 257);
+ ret = inflateSetDictionary(&strm, dict, 257);
+ assert(ret == Z_OK);
+ mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256);
+ ret = inflatePrime(&strm, 16, 0); assert(ret == Z_OK);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x80";
+ ret = inflateSync(&strm); assert(ret == Z_DATA_ERROR);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_STREAM_ERROR);
+ strm.avail_in = 4;
+ strm.next_in = (void *)"\0\0\xff\xff";
+ ret = inflateSync(&strm); assert(ret == Z_OK);
+ (void)inflateSyncPoint(&strm);
+ ret = inflateCopy(©, &strm); assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ ret = inflateUndermine(&strm, 1); assert(ret == Z_DATA_ERROR);
+ (void)inflateMark(&strm);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "miscellaneous, force memory errors");
+}
+
+/* input and output functions for inflateBack() */
+local unsigned pull(void *desc, unsigned char **buf)
+{
+ static unsigned int next = 0;
+ static unsigned char dat[] = {0x63, 0, 2, 0};
+ struct inflate_state *state;
+
+ if (desc == Z_NULL) {
+ next = 0;
+ return 0; /* no input (already provided at next_in) */
+ }
+ state = (void *)((z_stream *)desc)->state;
+ if (state != Z_NULL)
+ state->mode = SYNC; /* force an otherwise impossible situation */
+ return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0;
+}
+
+local int push(void *desc, unsigned char *buf, unsigned len)
+{
+ buf += len;
+ return desc != Z_NULL; /* force error if desc not null */
+}
+
+/* cover inflateBack() up to common deflate data cases and after those */
+local void cover_back(void)
+{
+ int ret;
+ z_stream strm;
+ unsigned char win[32768];
+
+ ret = inflateBackInit_(Z_NULL, 0, win, 0, 0);
+ assert(ret == Z_VERSION_ERROR);
+ ret = inflateBackInit(Z_NULL, 0, win); assert(ret == Z_STREAM_ERROR);
+ ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateBackEnd(Z_NULL); assert(ret == Z_STREAM_ERROR);
+ fputs("inflateBack bad parameters\n", stderr);
+
+ mem_setup(&strm);
+ ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x03";
+ ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+ assert(ret == Z_STREAM_END);
+ /* force output error */
+ strm.avail_in = 3;
+ strm.next_in = (void *)"\x63\x00";
+ ret = inflateBack(&strm, pull, Z_NULL, push, &strm);
+ assert(ret == Z_BUF_ERROR);
+ /* force mode error by mucking with state */
+ ret = inflateBack(&strm, pull, &strm, push, Z_NULL);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateBackEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "inflateBack bad state");
+
+ ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK);
+ ret = inflateBackEnd(&strm); assert(ret == Z_OK);
+ fputs("inflateBack built-in memory routines\n", stderr);
+}
+
+/* do a raw inflate of data in hexadecimal with both inflate and inflateBack */
+local int try(char *hex, char *id, int err)
+{
+ int ret;
+ unsigned len, size;
+ unsigned char *in, *out, *win;
+ char *prefix;
+ z_stream strm;
+
+ /* convert to hex */
+ in = h2b(hex, &len);
+ assert(in != NULL);
+
+ /* allocate work areas */
+ size = len << 3;
+ out = malloc(size);
+ assert(out != NULL);
+ win = malloc(32768);
+ assert(win != NULL);
+ prefix = malloc(strlen(id) + 6);
+ assert(prefix != NULL);
+
+ /* first with inflate */
+ strcpy(prefix, id);
+ strcat(prefix, "-late");
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, err < 0 ? 47 : -15);
+ assert(ret == Z_OK);
+ strm.avail_in = len;
+ strm.next_in = in;
+ do {
+ strm.avail_out = size;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_TREES);
+ assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR);
+ if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT)
+ break;
+ } while (strm.avail_in || strm.avail_out == 0);
+ if (err) {
+ assert(ret == Z_DATA_ERROR);
+ assert(strcmp(id, strm.msg) == 0);
+ }
+ inflateEnd(&strm);
+ mem_done(&strm, prefix);
+
+ /* then with inflateBack */
+ if (err >= 0) {
+ strcpy(prefix, id);
+ strcat(prefix, "-back");
+ mem_setup(&strm);
+ ret = inflateBackInit(&strm, 15, win);
+ assert(ret == Z_OK);
+ strm.avail_in = len;
+ strm.next_in = in;
+ ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+ assert(ret != Z_STREAM_ERROR);
+ if (err) {
+ assert(ret == Z_DATA_ERROR);
+ assert(strcmp(id, strm.msg) == 0);
+ }
+ inflateBackEnd(&strm);
+ mem_done(&strm, prefix);
+ }
+
+ /* clean up */
+ free(prefix);
+ free(win);
+ free(out);
+ free(in);
+ return ret;
+}
+
+/* cover deflate data cases in both inflate() and inflateBack() */
+local void cover_inflate(void)
+{
+ try("0 0 0 0 0", "invalid stored block lengths", 1);
+ try("3 0", "fixed", 0);
+ try("6", "invalid block type", 1);
+ try("1 1 0 fe ff 0", "stored", 0);
+ try("fc 0 0", "too many length or distance symbols", 1);
+ try("4 0 fe ff", "invalid code lengths set", 1);
+ try("4 0 24 49 0", "invalid bit length repeat", 1);
+ try("4 0 24 e9 ff ff", "invalid bit length repeat", 1);
+ try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1);
+ try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0",
+ "invalid literal/lengths set", 1);
+ try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1);
+ try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1);
+ try("2 7e ff ff", "invalid distance code", 1);
+ try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1);
+
+ /* also trailer mismatch just in inflate() */
+ try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1);
+ try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1",
+ "incorrect length check", -1);
+ try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0);
+ try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f",
+ "long code", 0);
+ try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0);
+ try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c",
+ "long distance and extra", 0);
+ try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0);
+ inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258,
+ Z_STREAM_END);
+ inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK);
+}
+
+/* cover remaining lines in inftrees.c */
+local void cover_trees(void)
+{
+ int ret;
+ unsigned bits;
+ unsigned short lens[16], work[16];
+ code *next, table[ENOUGH_DISTS];
+
+ /* we need to call inflate_table() directly in order to manifest not-
+ enough errors, since zlib insures that enough is always enough */
+ for (bits = 0; bits < 15; bits++)
+ lens[bits] = (unsigned short)(bits + 1);
+ lens[15] = 15;
+ next = table;
+ bits = 15;
+ ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+ assert(ret == 1);
+ next = table;
+ bits = 1;
+ ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+ assert(ret == 1);
+ fputs("inflate_table not enough errors\n", stderr);
+}
+
+/* cover remaining inffast.c decoding and window copying */
+local void cover_fast(void)
+{
+ inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68"
+ " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR);
+ inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49"
+ " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0",
+ "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR);
+ inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK);
+ inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0",
+ "contiguous and wrap around window", 6, -8, 259, Z_OK);
+ inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259,
+ Z_STREAM_END);
+}
+
+int main(void)
+{
+ fprintf(stderr, "%s\n", zlibVersion());
+ cover_support();
+ cover_wrap();
+ cover_back();
+ cover_inflate();
+ cover_trees();
+ cover_fast();
+ return 0;
+}
--- /dev/null
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef USE_MMAP
+# include <sys/types.h>
+# include <sys/mman.h>
+# include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# ifdef UNDER_CE
+# include <stdlib.h>
+# endif
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#ifdef _MSC_VER
+# define snprintf _snprintf
+#endif
+
+#ifdef VMS
+# define unlink delete
+# define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+# define unlink remove
+# define GZ_SUFFIX "-gz"
+# define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fileno */
+#endif
+
+#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+ extern int unlink OF((const char *));
+#endif
+#endif
+
+#if defined(UNDER_CE)
+# include <windows.h>
+# define perror(s) pwinerror(s)
+
+/* Map the Windows error number in ERROR to a locale-dependent error
+ message string and return a pointer to it. Typically, the values
+ for ERROR come from GetLastError.
+
+ The string pointed to shall not be modified by the application,
+ but may be overwritten by a subsequent call to strwinerror
+
+ The strwinerror function does not change the current setting
+ of GetLastError. */
+
+static char *strwinerror (error)
+ DWORD error;
+{
+ static char buf[1024];
+
+ wchar_t *msgbuf;
+ DWORD lasterr = GetLastError();
+ DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+ | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+ NULL,
+ error,
+ 0, /* Default language */
+ (LPVOID)&msgbuf,
+ 0,
+ NULL);
+ if (chars != 0) {
+ /* If there is an \r\n appended, zap it. */
+ if (chars >= 2
+ && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+ chars -= 2;
+ msgbuf[chars] = 0;
+ }
+
+ if (chars > sizeof (buf) - 1) {
+ chars = sizeof (buf) - 1;
+ msgbuf[chars] = 0;
+ }
+
+ wcstombs(buf, msgbuf, chars + 1);
+ LocalFree(msgbuf);
+ }
+ else {
+ sprintf(buf, "unknown win32 error (%ld)", error);
+ }
+
+ SetLastError(lasterr);
+ return buf;
+}
+
+static void pwinerror (s)
+ const char *s;
+{
+ if (s && *s)
+ fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
+ else
+ fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
+}
+
+#endif /* UNDER_CE */
+
+#ifndef GZ_SUFFIX
+# define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN 16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+# define local static
+ /* Needed for systems with limitation on stack size. */
+#else
+# define local
+#endif
+
+#ifdef Z_SOLO
+/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
+# include <unistd.h> /* for unlink() */
+#endif
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ q = Z_NULL;
+ return calloc(n, m);
+}
+
+void myfree(q, p)
+ void *q, *p;
+{
+ q = Z_NULL;
+ free(p);
+}
+
+typedef struct gzFile_s {
+ FILE *file;
+ int write;
+ int err;
+ char *msg;
+ z_stream strm;
+} *gzFile;
+
+gzFile gzopen OF((const char *, const char *));
+gzFile gzdopen OF((int, const char *));
+gzFile gz_open OF((const char *, int, const char *));
+
+gzFile gzopen(path, mode)
+const char *path;
+const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+gzFile gzdopen(fd, mode)
+int fd;
+const char *mode;
+{
+ return gz_open(NULL, fd, mode);
+}
+
+gzFile gz_open(path, fd, mode)
+ const char *path;
+ int fd;
+ const char *mode;
+{
+ gzFile gz;
+ int ret;
+
+ gz = malloc(sizeof(struct gzFile_s));
+ if (gz == NULL)
+ return NULL;
+ gz->write = strchr(mode, 'w') != NULL;
+ gz->strm.zalloc = myalloc;
+ gz->strm.zfree = myfree;
+ gz->strm.opaque = Z_NULL;
+ if (gz->write)
+ ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
+ else {
+ gz->strm.next_in = 0;
+ gz->strm.avail_in = Z_NULL;
+ ret = inflateInit2(&(gz->strm), 15 + 16);
+ }
+ if (ret != Z_OK) {
+ free(gz);
+ return NULL;
+ }
+ gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
+ fopen(path, gz->write ? "wb" : "rb");
+ if (gz->file == NULL) {
+ gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
+ free(gz);
+ return NULL;
+ }
+ gz->err = 0;
+ gz->msg = "";
+ return gz;
+}
+
+int gzwrite OF((gzFile, const void *, unsigned));
+
+int gzwrite(gz, buf, len)
+ gzFile gz;
+ const void *buf;
+ unsigned len;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL || !gz->write)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_in = (void *)buf;
+ strm->avail_in = len;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_NO_FLUSH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ return len;
+}
+
+int gzread OF((gzFile, void *, unsigned));
+
+int gzread(gz, buf, len)
+ gzFile gz;
+ void *buf;
+ unsigned len;
+{
+ int ret;
+ unsigned got;
+ unsigned char in[1];
+ z_stream *strm;
+
+ if (gz == NULL || gz->write)
+ return 0;
+ if (gz->err)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_out = (void *)buf;
+ strm->avail_out = len;
+ do {
+ got = fread(in, 1, 1, gz->file);
+ if (got == 0)
+ break;
+ strm->next_in = in;
+ strm->avail_in = 1;
+ ret = inflate(strm, Z_NO_FLUSH);
+ if (ret == Z_DATA_ERROR) {
+ gz->err = Z_DATA_ERROR;
+ gz->msg = strm->msg;
+ return 0;
+ }
+ if (ret == Z_STREAM_END)
+ inflateReset(strm);
+ } while (strm->avail_out);
+ return len - strm->avail_out;
+}
+
+int gzclose OF((gzFile));
+
+int gzclose(gz)
+ gzFile gz;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL)
+ return Z_STREAM_ERROR;
+ strm = &(gz->strm);
+ if (gz->write) {
+ strm->next_in = Z_NULL;
+ strm->avail_in = 0;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_FINISH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ deflateEnd(strm);
+ }
+ else
+ inflateEnd(strm);
+ fclose(gz->file);
+ free(gz);
+ return Z_OK;
+}
+
+const char *gzerror OF((gzFile, int *));
+
+const char *gzerror(gz, err)
+ gzFile gz;
+ int *err;
+{
+ *err = gz->err;
+ return gz->msg;
+}
+
+#endif
+
+char *prog;
+
+void error OF((const char *msg));
+void gz_compress OF((FILE *in, gzFile out));
+#ifdef USE_MMAP
+int gz_compress_mmap OF((FILE *in, gzFile out));
+#endif
+void gz_uncompress OF((gzFile in, FILE *out));
+void file_compress OF((char *file, char *mode));
+void file_uncompress OF((char *file));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+ const char *msg;
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+ FILE *in;
+ gzFile out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+#ifdef USE_MMAP
+ /* Try first compressing with mmap. If mmap fails (minigzip used in a
+ * pipe), use the normal fread loop.
+ */
+ if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+ for (;;) {
+ len = (int)fread(buf, 1, sizeof(buf), in);
+ if (ferror(in)) {
+ perror("fread");
+ exit(1);
+ }
+ if (len == 0) break;
+
+ if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+ }
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+ FILE *in;
+ gzFile out;
+{
+ int len;
+ int err;
+ int ifd = fileno(in);
+ caddr_t buf; /* mmap'ed buffer for the entire input file */
+ off_t buf_len; /* length of the input file */
+ struct stat sb;
+
+ /* Determine the size of the file, needed for mmap: */
+ if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+ buf_len = sb.st_size;
+ if (buf_len <= 0) return Z_ERRNO;
+
+ /* Now do the actual mmap: */
+ buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+ if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+ /* Compress the whole file at once: */
+ len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+ if (len != (int)buf_len) error(gzerror(out, &err));
+
+ munmap(buf, buf_len);
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+ return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+ gzFile in;
+ FILE *out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+ for (;;) {
+ len = gzread(in, buf, sizeof(buf));
+ if (len < 0) error (gzerror(in, &err));
+ if (len == 0) break;
+
+ if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+ error("failed fwrite");
+ }
+ }
+ if (fclose(out)) error("failed fclose");
+
+ if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+ char *file;
+ char *mode;
+{
+ local char outfile[MAX_NAME_LEN];
+ FILE *in;
+ gzFile out;
+
+ if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX);
+#else
+ strcpy(outfile, file);
+ strcat(outfile, GZ_SUFFIX);
+#endif
+
+ in = fopen(file, "rb");
+ if (in == NULL) {
+ perror(file);
+ exit(1);
+ }
+ out = gzopen(outfile, mode);
+ if (out == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+ exit(1);
+ }
+ gz_compress(in, out);
+
+ unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+ char *file;
+{
+ local char buf[MAX_NAME_LEN];
+ char *infile, *outfile;
+ FILE *out;
+ gzFile in;
+ size_t len = strlen(file);
+
+ if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(buf, sizeof(buf), "%s", file);
+#else
+ strcpy(buf, file);
+#endif
+
+ if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+ infile = file;
+ outfile = buf;
+ outfile[len-3] = '\0';
+ } else {
+ outfile = file;
+ infile = buf;
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX);
+#else
+ strcat(infile, GZ_SUFFIX);
+#endif
+ }
+ in = gzopen(infile, "rb");
+ if (in == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+ exit(1);
+ }
+ out = fopen(outfile, "wb");
+ if (out == NULL) {
+ perror(file);
+ exit(1);
+ }
+
+ gz_uncompress(in, out);
+
+ unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
+ * -c : write to standard output
+ * -d : decompress
+ * -f : compress with Z_FILTERED
+ * -h : compress with Z_HUFFMAN_ONLY
+ * -r : compress with Z_RLE
+ * -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ int copyout = 0;
+ int uncompr = 0;
+ gzFile file;
+ char *bname, outmode[20];
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(outmode, sizeof(outmode), "%s", "wb6 ");
+#else
+ strcpy(outmode, "wb6 ");
+#endif
+
+ prog = argv[0];
+ bname = strrchr(argv[0], '/');
+ if (bname)
+ bname++;
+ else
+ bname = argv[0];
+ argc--, argv++;
+
+ if (!strcmp(bname, "gunzip"))
+ uncompr = 1;
+ else if (!strcmp(bname, "zcat"))
+ copyout = uncompr = 1;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "-c") == 0)
+ copyout = 1;
+ else if (strcmp(*argv, "-d") == 0)
+ uncompr = 1;
+ else if (strcmp(*argv, "-f") == 0)
+ outmode[3] = 'f';
+ else if (strcmp(*argv, "-h") == 0)
+ outmode[3] = 'h';
+ else if (strcmp(*argv, "-r") == 0)
+ outmode[3] = 'R';
+ else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+ (*argv)[2] == 0)
+ outmode[2] = (*argv)[1];
+ else
+ break;
+ argc--, argv++;
+ }
+ if (outmode[3] == ' ')
+ outmode[3] = 0;
+ if (argc == 0) {
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+ if (uncompr) {
+ file = gzdopen(fileno(stdin), "rb");
+ if (file == NULL) error("can't gzdopen stdin");
+ gz_uncompress(file, stdout);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+ gz_compress(stdin, file);
+ }
+ } else {
+ if (copyout) {
+ SET_BINARY_MODE(stdout);
+ }
+ do {
+ if (uncompr) {
+ if (copyout) {
+ file = gzopen(*argv, "rb");
+ if (file == NULL)
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
+ else
+ gz_uncompress(file, stdout);
+ } else {
+ file_uncompress(*argv);
+ }
+ } else {
+ if (copyout) {
+ FILE * in = fopen(*argv, "rb");
+
+ if (in == NULL) {
+ perror(*argv);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+
+ gz_compress(in, file);
+ }
+
+ } else {
+ file_compress(*argv, outmode);
+ }
+ }
+ } while (argv++, --argc);
+ }
+ return 0;
+}
--- /dev/null
+<?xml version="1.0" ?>
+<package name="zlib" version="1.2.8">
+ <library name="zlib" dlversion="1.2.8" dlname="z">
+ <property name="description"> zip compression library </property>
+ <property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
+
+ <!-- fixme: not implemented yet -->
+ <property name="compiler/c/inline" value="yes" />
+
+ <include-file name="zlib.h" scope="public" mode="644" />
+ <include-file name="zconf.h" scope="public" mode="644" />
+
+ <source name="adler32.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ </source>
+ <source name="compress.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ </source>
+ <source name="crc32.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="crc32.h" />
+ </source>
+ <source name="gzclose.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="gzguts.h" />
+ </source>
+ <source name="gzlib.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="gzguts.h" />
+ </source>
+ <source name="gzread.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="gzguts.h" />
+ </source>
+ <source name="gzwrite.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="gzguts.h" />
+ </source>
+ <source name="uncompr.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ </source>
+ <source name="deflate.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="deflate.h" />
+ </source>
+ <source name="trees.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="deflate.h" />
+ <depend name="trees.h" />
+ </source>
+ <source name="zutil.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ </source>
+ <source name="inflate.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="inftrees.h" />
+ <depend name="inflate.h" />
+ <depend name="inffast.h" />
+ </source>
+ <source name="infback.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="inftrees.h" />
+ <depend name="inflate.h" />
+ <depend name="inffast.h" />
+ </source>
+ <source name="inftrees.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="inftrees.h" />
+ </source>
+ <source name="inffast.c">
+ <depend name="zlib.h" />
+ <depend name="zconf.h" />
+ <depend name="zutil.h" />
+ <depend name="inftrees.h" />
+ <depend name="inflate.h" />
+ <depend name="inffast.h" />
+ </source>
+ </library>
+</package>
+
+<!--
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+# OBJA =
+# to use the asm code: make OBJA=match.o
+#
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+-->
--- /dev/null
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * detect_data_type() function provided freely by Cosmin Truta, 2006
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process uses several Huffman trees. The more
+ * common source values are represented by shorter bit sequences.
+ *
+ * Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values). The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ * Storer, James A.
+ * Data Compression: Methods and Theory, pp. 49-50.
+ * Computer Science Press, 1988. ISBN 0-7167-8156-5.
+ *
+ * Sedgewick, R.
+ * Algorithms, p290.
+ * Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
+
+#include "deflate.h"
+
+#ifdef DEBUG
+# include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6 16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10 17
+/* repeat a zero length 3-10 times (3 bits of repeat count) */
+
+#define REPZ_11_138 18
+/* repeat a zero length 11-138 times (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+ = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN 512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+# include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+ const ct_data *static_tree; /* static tree or NULL */
+ const intf *extra_bits; /* extra bits for each code or NULL */
+ int extra_base; /* base index for extra_bits */
+ int elems; /* max number of elements in the tree */
+ int max_length; /* max bit length for the codes */
+};
+
+local static_tree_desc static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc static_d_desc =
+{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
+
+local static_tree_desc static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block OF((deflate_state *s));
+local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
+local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree OF((deflate_state *s, tree_desc *desc));
+local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local int build_bl_tree OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+ int blcodes));
+local void compress_block OF((deflate_state *s, const ct_data *ltree,
+ const ct_data *dtree));
+local int detect_data_type OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup OF((deflate_state *s));
+local void bi_flush OF((deflate_state *s));
+local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
+ int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+ /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+# define send_code(s, c, tree) \
+ { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+ send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+ put_byte(s, (uch)((w) & 0xff)); \
+ put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+ deflate_state *s;
+ int value; /* value to send */
+ int length; /* number of bits */
+{
+ Tracevv((stderr," l %2d v %4x ", length, value));
+ Assert(length > 0 && length <= 15, "invalid length");
+ s->bits_sent += (ulg)length;
+
+ /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+ * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+ * unused bits in value.
+ */
+ if (s->bi_valid > (int)Buf_size - length) {
+ s->bi_buf |= (ush)value << s->bi_valid;
+ put_short(s, s->bi_buf);
+ s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+ s->bi_valid += length - Buf_size;
+ } else {
+ s->bi_buf |= (ush)value << s->bi_valid;
+ s->bi_valid += length;
+ }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+ if (s->bi_valid > (int)Buf_size - len) {\
+ int val = value;\
+ s->bi_buf |= (ush)val << s->bi_valid;\
+ put_short(s, s->bi_buf);\
+ s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+ s->bi_valid += len - Buf_size;\
+ } else {\
+ s->bi_buf |= (ush)(value) << s->bi_valid;\
+ s->bi_valid += len;\
+ }\
+}
+#endif /* DEBUG */
+
+
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+ static int static_init_done = 0;
+ int n; /* iterates over tree elements */
+ int bits; /* bit counter */
+ int length; /* length value */
+ int code; /* code value */
+ int dist; /* distance index */
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ if (static_init_done) return;
+
+ /* For some embedded targets, global variables are not initialized: */
+#ifdef NO_INIT_GLOBAL_POINTERS
+ static_l_desc.static_tree = static_ltree;
+ static_l_desc.extra_bits = extra_lbits;
+ static_d_desc.static_tree = static_dtree;
+ static_d_desc.extra_bits = extra_dbits;
+ static_bl_desc.extra_bits = extra_blbits;
+#endif
+
+ /* Initialize the mapping length (0..255) -> length code (0..28) */
+ length = 0;
+ for (code = 0; code < LENGTH_CODES-1; code++) {
+ base_length[code] = length;
+ for (n = 0; n < (1<<extra_lbits[code]); n++) {
+ _length_code[length++] = (uch)code;
+ }
+ }
+ Assert (length == 256, "tr_static_init: length != 256");
+ /* Note that the length 255 (match length 258) can be represented
+ * in two different ways: code 284 + 5 bits or code 285, so we
+ * overwrite length_code[255] to use the best encoding:
+ */
+ _length_code[length-1] = (uch)code;
+
+ /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+ dist = 0;
+ for (code = 0 ; code < 16; code++) {
+ base_dist[code] = dist;
+ for (n = 0; n < (1<<extra_dbits[code]); n++) {
+ _dist_code[dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: dist != 256");
+ dist >>= 7; /* from now on, all distances are divided by 128 */
+ for ( ; code < D_CODES; code++) {
+ base_dist[code] = dist << 7;
+ for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+ _dist_code[256 + dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+ /* Construct the codes of the static literal tree */
+ for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+ n = 0;
+ while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+ while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+ while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+ while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+ /* Codes 286 and 287 do not exist, but we must include them in the
+ * tree construction to get a canonical Huffman tree (longest code
+ * all ones)
+ */
+ gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+ /* The static distance tree is trivial: */
+ for (n = 0; n < D_CODES; n++) {
+ static_dtree[n].Len = 5;
+ static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+ }
+ static_init_done = 1;
+
+# ifdef GEN_TREES_H
+ gen_trees_header();
+# endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+# ifndef DEBUG
+# include <stdio.h>
+# endif
+
+# define SEPARATOR(i, last, width) \
+ ((i) == (last)? "\n};\n\n" : \
+ ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+ FILE *header = fopen("trees.h", "w");
+ int i;
+
+ Assert (header != NULL, "Can't open trees.h");
+ fprintf(header,
+ "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+ fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+ for (i = 0; i < L_CODES+2; i++) {
+ fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+ static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+ }
+
+ fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+ static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+ }
+
+ fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
+ for (i = 0; i < DIST_CODE_LEN; i++) {
+ fprintf(header, "%2u%s", _dist_code[i],
+ SEPARATOR(i, DIST_CODE_LEN-1, 20));
+ }
+
+ fprintf(header,
+ "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+ for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+ fprintf(header, "%2u%s", _length_code[i],
+ SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+ }
+
+ fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+ for (i = 0; i < LENGTH_CODES; i++) {
+ fprintf(header, "%1u%s", base_length[i],
+ SEPARATOR(i, LENGTH_CODES-1, 20));
+ }
+
+ fprintf(header, "local const int base_dist[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "%5u%s", base_dist[i],
+ SEPARATOR(i, D_CODES-1, 10));
+ }
+
+ fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void ZLIB_INTERNAL _tr_init(s)
+ deflate_state *s;
+{
+ tr_static_init();
+
+ s->l_desc.dyn_tree = s->dyn_ltree;
+ s->l_desc.stat_desc = &static_l_desc;
+
+ s->d_desc.dyn_tree = s->dyn_dtree;
+ s->d_desc.stat_desc = &static_d_desc;
+
+ s->bl_desc.dyn_tree = s->bl_tree;
+ s->bl_desc.stat_desc = &static_bl_desc;
+
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+#ifdef DEBUG
+ s->compressed_len = 0L;
+ s->bits_sent = 0L;
+#endif
+
+ /* Initialize the first block of the first file: */
+ init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+ deflate_state *s;
+{
+ int n; /* iterates over tree elements */
+
+ /* Initialize the trees. */
+ for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
+ for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
+ for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+ s->dyn_ltree[END_BLOCK].Freq = 1;
+ s->opt_len = s->static_len = 0L;
+ s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+ top = s->heap[SMALLEST]; \
+ s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+ pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+ (tree[n].Freq < tree[m].Freq || \
+ (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+ deflate_state *s;
+ ct_data *tree; /* the tree to restore */
+ int k; /* node to move down */
+{
+ int v = s->heap[k];
+ int j = k << 1; /* left son of k */
+ while (j <= s->heap_len) {
+ /* Set j to the smallest of the two sons: */
+ if (j < s->heap_len &&
+ smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+ j++;
+ }
+ /* Exit if v is smaller than both sons */
+ if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+ /* Exchange v with the smallest son */
+ s->heap[k] = s->heap[j]; k = j;
+
+ /* And continue down the tree, setting j to the left son of k */
+ j <<= 1;
+ }
+ s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ * above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ * array bl_count contains the frequencies for each bit length.
+ * The length opt_len is updated; static_len is also updated if stree is
+ * not null.
+ */
+local void gen_bitlen(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ int max_code = desc->max_code;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ const intf *extra = desc->stat_desc->extra_bits;
+ int base = desc->stat_desc->extra_base;
+ int max_length = desc->stat_desc->max_length;
+ int h; /* heap index */
+ int n, m; /* iterate over the tree elements */
+ int bits; /* bit length */
+ int xbits; /* extra bits */
+ ush f; /* frequency */
+ int overflow = 0; /* number of elements with bit length too large */
+
+ for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+ /* In a first pass, compute the optimal bit lengths (which may
+ * overflow in the case of the bit length tree).
+ */
+ tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+ for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+ n = s->heap[h];
+ bits = tree[tree[n].Dad].Len + 1;
+ if (bits > max_length) bits = max_length, overflow++;
+ tree[n].Len = (ush)bits;
+ /* We overwrite tree[n].Dad which is no longer needed */
+
+ if (n > max_code) continue; /* not a leaf node */
+
+ s->bl_count[bits]++;
+ xbits = 0;
+ if (n >= base) xbits = extra[n-base];
+ f = tree[n].Freq;
+ s->opt_len += (ulg)f * (bits + xbits);
+ if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+ }
+ if (overflow == 0) return;
+
+ Trace((stderr,"\nbit length overflow\n"));
+ /* This happens for example on obj2 and pic of the Calgary corpus */
+
+ /* Find the first bit length which could increase: */
+ do {
+ bits = max_length-1;
+ while (s->bl_count[bits] == 0) bits--;
+ s->bl_count[bits]--; /* move one leaf down the tree */
+ s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+ s->bl_count[max_length]--;
+ /* The brother of the overflow item also moves one step up,
+ * but this does not affect bl_count[max_length]
+ */
+ overflow -= 2;
+ } while (overflow > 0);
+
+ /* Now recompute all bit lengths, scanning in increasing frequency.
+ * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+ * lengths instead of fixing only the wrong ones. This idea is taken
+ * from 'ar' written by Haruhiko Okumura.)
+ */
+ for (bits = max_length; bits != 0; bits--) {
+ n = s->bl_count[bits];
+ while (n != 0) {
+ m = s->heap[--h];
+ if (m > max_code) continue;
+ if ((unsigned) tree[m].Len != (unsigned) bits) {
+ Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+ s->opt_len += ((long)bits - (long)tree[m].Len)
+ *(long)tree[m].Freq;
+ tree[m].Len = (ush)bits;
+ }
+ n--;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ * zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+ ct_data *tree; /* the tree to decorate */
+ int max_code; /* largest code with non zero frequency */
+ ushf *bl_count; /* number of codes at each bit length */
+{
+ ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+ ush code = 0; /* running code value */
+ int bits; /* bit index */
+ int n; /* code index */
+
+ /* The distribution counts are first used to generate the code values
+ * without bit reversal.
+ */
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+ }
+ /* Check that the bit counts in bl_count are consistent. The last code
+ * must be all ones.
+ */
+ Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+ "inconsistent bit counts");
+ Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+ for (n = 0; n <= max_code; n++) {
+ int len = tree[n].Len;
+ if (len == 0) continue;
+ /* Now reverse the bits */
+ tree[n].Code = bi_reverse(next_code[len]++, len);
+
+ Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+ n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+ }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ * and corresponding code. The length opt_len is updated; static_len is
+ * also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ int elems = desc->stat_desc->elems;
+ int n, m; /* iterate over heap elements */
+ int max_code = -1; /* largest code with non zero frequency */
+ int node; /* new node being created */
+
+ /* Construct the initial heap, with least frequent element in
+ * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+ * heap[0] is not used.
+ */
+ s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+ for (n = 0; n < elems; n++) {
+ if (tree[n].Freq != 0) {
+ s->heap[++(s->heap_len)] = max_code = n;
+ s->depth[n] = 0;
+ } else {
+ tree[n].Len = 0;
+ }
+ }
+
+ /* The pkzip format requires that at least one distance code exists,
+ * and that at least one bit should be sent even if there is only one
+ * possible code. So to avoid special checks later on we force at least
+ * two codes of non zero frequency.
+ */
+ while (s->heap_len < 2) {
+ node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+ tree[node].Freq = 1;
+ s->depth[node] = 0;
+ s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+ /* node is 0 or 1 so it does not have extra bits */
+ }
+ desc->max_code = max_code;
+
+ /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+ * establish sub-heaps of increasing lengths:
+ */
+ for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+ /* Construct the Huffman tree by repeatedly combining the least two
+ * frequent nodes.
+ */
+ node = elems; /* next internal node of the tree */
+ do {
+ pqremove(s, tree, n); /* n = node of least frequency */
+ m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+ s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+ s->heap[--(s->heap_max)] = m;
+
+ /* Create a new node father of n and m */
+ tree[node].Freq = tree[n].Freq + tree[m].Freq;
+ s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
+ s->depth[n] : s->depth[m]) + 1);
+ tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+ if (tree == s->bl_tree) {
+ fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+ node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+ }
+#endif
+ /* and insert the new node in the heap */
+ s->heap[SMALLEST] = node++;
+ pqdownheap(s, tree, SMALLEST);
+
+ } while (s->heap_len >= 2);
+
+ s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+ /* At this point, the fields freq and dad are set. We can now
+ * generate the bit lengths.
+ */
+ gen_bitlen(s, (tree_desc *)desc);
+
+ /* The field len is now set, we can generate the bit codes */
+ gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ if (nextlen == 0) max_count = 138, min_count = 3;
+ tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ s->bl_tree[curlen].Freq += count;
+ } else if (curlen != 0) {
+ if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+ s->bl_tree[REP_3_6].Freq++;
+ } else if (count <= 10) {
+ s->bl_tree[REPZ_3_10].Freq++;
+ } else {
+ s->bl_tree[REPZ_11_138].Freq++;
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ /* tree[max_code+1].Len = -1; */ /* guard already set */
+ if (nextlen == 0) max_count = 138, min_count = 3;
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+ } else if (curlen != 0) {
+ if (curlen != prevlen) {
+ send_code(s, curlen, s->bl_tree); count--;
+ }
+ Assert(count >= 3 && count <= 6, " 3_6?");
+ send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+ } else if (count <= 10) {
+ send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+ } else {
+ send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+ deflate_state *s;
+{
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ /* Determine the bit length frequencies for literal and distance trees */
+ scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+ scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+ /* Build the bit length tree: */
+ build_tree(s, (tree_desc *)(&(s->bl_desc)));
+ /* opt_len now includes the length of the tree representations, except
+ * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+ */
+
+ /* Determine the number of bit length codes to send. The pkzip format
+ * requires that at least 4 bit length codes be sent. (appnote.txt says
+ * 3 but the actual value used is 4.)
+ */
+ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+ if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+ }
+ /* Update opt_len to include the bit length tree and counts */
+ s->opt_len += 3*(max_blindex+1) + 5+5+4;
+ Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+ s->opt_len, s->static_len));
+
+ return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+ deflate_state *s;
+ int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+ int rank; /* index in bl_order */
+
+ Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+ Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+ "too many codes");
+ Tracev((stderr, "\nbl counts: "));
+ send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+ send_bits(s, dcodes-1, 5);
+ send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
+ for (rank = 0; rank < blcodes; rank++) {
+ Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+ send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+ }
+ Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+ Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+ Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
+ deflate_state *s;
+ charf *buf; /* input block */
+ ulg stored_len; /* length of input block */
+ int last; /* one if this is the last block for a file */
+{
+ send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */
+#ifdef DEBUG
+ s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+ s->compressed_len += (stored_len + 4) << 3;
+#endif
+ copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
+ */
+void ZLIB_INTERNAL _tr_flush_bits(s)
+ deflate_state *s;
+{
+ bi_flush(s);
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ */
+void ZLIB_INTERNAL _tr_align(s)
+ deflate_state *s;
+{
+ send_bits(s, STATIC_TREES<<1, 3);
+ send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+ s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+ bi_flush(s);
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
+ deflate_state *s;
+ charf *buf; /* input block, or NULL if too old */
+ ulg stored_len; /* length of input block */
+ int last; /* one if this is the last block for a file */
+{
+ ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+ int max_blindex = 0; /* index of last bit length code of non zero freq */
+
+ /* Build the Huffman trees unless a stored block is forced */
+ if (s->level > 0) {
+
+ /* Check if the file is binary or text */
+ if (s->strm->data_type == Z_UNKNOWN)
+ s->strm->data_type = detect_data_type(s);
+
+ /* Construct the literal and distance trees */
+ build_tree(s, (tree_desc *)(&(s->l_desc)));
+ Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+
+ build_tree(s, (tree_desc *)(&(s->d_desc)));
+ Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+ /* At this point, opt_len and static_len are the total bit lengths of
+ * the compressed block data, excluding the tree representations.
+ */
+
+ /* Build the bit length tree for the above two trees, and get the index
+ * in bl_order of the last bit length code to send.
+ */
+ max_blindex = build_bl_tree(s);
+
+ /* Determine the best encoding. Compute the block lengths in bytes. */
+ opt_lenb = (s->opt_len+3+7)>>3;
+ static_lenb = (s->static_len+3+7)>>3;
+
+ Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+ opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+ s->last_lit));
+
+ if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+ } else {
+ Assert(buf != (char*)0, "lost buf");
+ opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+ }
+
+#ifdef FORCE_STORED
+ if (buf != (char*)0) { /* force stored block */
+#else
+ if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+ /* 4: two words for the lengths */
+#endif
+ /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+ * Otherwise we can't have processed more than WSIZE input bytes since
+ * the last block flush, because compression would have been
+ * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+ * transform a block into a stored block.
+ */
+ _tr_stored_block(s, buf, stored_len, last);
+
+#ifdef FORCE_STATIC
+ } else if (static_lenb >= 0) { /* force static trees */
+#else
+ } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
+#endif
+ send_bits(s, (STATIC_TREES<<1)+last, 3);
+ compress_block(s, (const ct_data *)static_ltree,
+ (const ct_data *)static_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->static_len;
+#endif
+ } else {
+ send_bits(s, (DYN_TREES<<1)+last, 3);
+ send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+ max_blindex+1);
+ compress_block(s, (const ct_data *)s->dyn_ltree,
+ (const ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->opt_len;
+#endif
+ }
+ Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+ /* The above check is made mod 2^32, for files larger than 512 MB
+ * and uLong implemented on 32 bits.
+ */
+ init_block(s);
+
+ if (last) {
+ bi_windup(s);
+#ifdef DEBUG
+ s->compressed_len += 7; /* align on byte boundary */
+#endif
+ }
+ Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+ s->compressed_len-7*last));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
+ deflate_state *s;
+ unsigned dist; /* distance of matched string */
+ unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+ s->d_buf[s->last_lit] = (ush)dist;
+ s->l_buf[s->last_lit++] = (uch)lc;
+ if (dist == 0) {
+ /* lc is the unmatched char */
+ s->dyn_ltree[lc].Freq++;
+ } else {
+ s->matches++;
+ /* Here, lc is the match length - MIN_MATCH */
+ dist--; /* dist = match distance - 1 */
+ Assert((ush)dist < (ush)MAX_DIST(s) &&
+ (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+ (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
+
+ s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+ s->dyn_dtree[d_code(dist)].Freq++;
+ }
+
+#ifdef TRUNCATE_BLOCK
+ /* Try to guess if it is profitable to stop the current block here */
+ if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+ /* Compute an upper bound for the compressed length */
+ ulg out_length = (ulg)s->last_lit*8L;
+ ulg in_length = (ulg)((long)s->strstart - s->block_start);
+ int dcode;
+ for (dcode = 0; dcode < D_CODES; dcode++) {
+ out_length += (ulg)s->dyn_dtree[dcode].Freq *
+ (5L+extra_dbits[dcode]);
+ }
+ out_length >>= 3;
+ Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+ s->last_lit, in_length, out_length,
+ 100L - out_length*100L/in_length));
+ if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+ }
+#endif
+ return (s->last_lit == s->lit_bufsize-1);
+ /* We avoid equality with lit_bufsize because of wraparound at 64K
+ * on 16 bit machines and because stored blocks are restricted to
+ * 64K-1 bytes.
+ */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+ deflate_state *s;
+ const ct_data *ltree; /* literal tree */
+ const ct_data *dtree; /* distance tree */
+{
+ unsigned dist; /* distance of matched string */
+ int lc; /* match length or unmatched char (if dist == 0) */
+ unsigned lx = 0; /* running index in l_buf */
+ unsigned code; /* the code to send */
+ int extra; /* number of extra bits to send */
+
+ if (s->last_lit != 0) do {
+ dist = s->d_buf[lx];
+ lc = s->l_buf[lx++];
+ if (dist == 0) {
+ send_code(s, lc, ltree); /* send a literal byte */
+ Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ code = _length_code[lc];
+ send_code(s, code+LITERALS+1, ltree); /* send the length code */
+ extra = extra_lbits[code];
+ if (extra != 0) {
+ lc -= base_length[code];
+ send_bits(s, lc, extra); /* send the extra length bits */
+ }
+ dist--; /* dist is now the match distance - 1 */
+ code = d_code(dist);
+ Assert (code < D_CODES, "bad d_code");
+
+ send_code(s, code, dtree); /* send the distance code */
+ extra = extra_dbits[code];
+ if (extra != 0) {
+ dist -= base_dist[code];
+ send_bits(s, dist, extra); /* send the extra distance bits */
+ }
+ } /* literal or match pair ? */
+
+ /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+ Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+ "pendingBuf overflow");
+
+ } while (lx < s->last_lit);
+
+ send_code(s, END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ * a) There are no non-portable control characters belonging to the
+ * "black list" (0..6, 14..25, 28..31).
+ * b) There is at least one printable character belonging to the
+ * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ * "gray list" that is ignored in this detection algorithm:
+ * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+local int detect_data_type(s)
+ deflate_state *s;
+{
+ /* black_mask is the bit mask of black-listed bytes
+ * set bits 0..6, 14..25, and 28..31
+ * 0xf3ffc07f = binary 11110011111111111100000001111111
+ */
+ unsigned long black_mask = 0xf3ffc07fUL;
+ int n;
+
+ /* Check for non-textual ("black-listed") bytes. */
+ for (n = 0; n <= 31; n++, black_mask >>= 1)
+ if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+ return Z_BINARY;
+
+ /* Check for textual ("white-listed") bytes. */
+ if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+ || s->dyn_ltree[13].Freq != 0)
+ return Z_TEXT;
+ for (n = 32; n < LITERALS; n++)
+ if (s->dyn_ltree[n].Freq != 0)
+ return Z_TEXT;
+
+ /* There are no "black-listed" or "white-listed" bytes:
+ * this stream either is empty or has tolerated ("gray-listed") bytes only.
+ */
+ return Z_BINARY;
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+ unsigned code; /* the value to invert */
+ int len; /* its bit length */
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+ deflate_state *s;
+{
+ if (s->bi_valid == 16) {
+ put_short(s, s->bi_buf);
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+ } else if (s->bi_valid >= 8) {
+ put_byte(s, (Byte)s->bi_buf);
+ s->bi_buf >>= 8;
+ s->bi_valid -= 8;
+ }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+ deflate_state *s;
+{
+ if (s->bi_valid > 8) {
+ put_short(s, s->bi_buf);
+ } else if (s->bi_valid > 0) {
+ put_byte(s, (Byte)s->bi_buf);
+ }
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+#ifdef DEBUG
+ s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+ deflate_state *s;
+ charf *buf; /* the input data */
+ unsigned len; /* its length */
+ int header; /* true if block header must be written */
+{
+ bi_windup(s); /* align on byte boundary */
+
+ if (header) {
+ put_short(s, (ush)len);
+ put_short(s, (ush)~len);
+#ifdef DEBUG
+ s->bits_sent += 2*16;
+#endif
+ }
+#ifdef DEBUG
+ s->bits_sent += (ulg)len<<3;
+#endif
+ while (len--) {
+ put_byte(s, *buf++);
+ }
+}
--- /dev/null
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
+{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
+{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
+{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
+{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
+{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
+{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
+{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
+{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
+{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
+{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
+{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
+{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
+{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
+{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
+{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
+{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
+{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
+{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
+{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
+{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
+{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
+{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
+{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
+{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
+{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
+{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
+{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
+{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
+{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
+{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
+{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
+{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
+{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
+{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
+{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
+{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
+{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
+{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
+{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
+{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
+{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
+{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
+{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
+{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
+{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
+{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
+{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
+{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
+{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
+{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
+{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
+{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
+{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
+{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
+{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
+{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
+{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
+ 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
+ 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
+ 32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
+ 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
+};
+
--- /dev/null
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+{
+ z_stream stream;
+ int err;
+
+ stream.next_in = (z_const Bytef *)source;
+ stream.avail_in = (uInt)sourceLen;
+ /* Check for source > 64K on 16-bit machine: */
+ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+ stream.next_out = dest;
+ stream.avail_out = (uInt)*destLen;
+ if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+ stream.zalloc = (alloc_func)0;
+ stream.zfree = (free_func)0;
+
+ err = inflateInit(&stream);
+ if (err != Z_OK) return err;
+
+ err = inflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ inflateEnd(&stream);
+ if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
+ return Z_DATA_ERROR;
+ return err;
+ }
+ *destLen = stream.total_out;
+
+ err = inflateEnd(&stream);
+ return err;
+}
--- /dev/null
+# Makefile for zlib
+# OpenWatcom flat model
+# Last updated: 28-Dec-2005
+
+# To use, do "wmake -f watcom_f.mak"
+
+C_SOURCE = adler32.c compress.c crc32.c deflate.c &
+ gzclose.c gzlib.c gzread.c gzwrite.c &
+ infback.c inffast.c inflate.c inftrees.c &
+ trees.c uncompr.c zutil.c
+
+OBJS = adler32.obj compress.obj crc32.obj deflate.obj &
+ gzclose.obj gzlib.obj gzread.obj gzwrite.obj &
+ infback.obj inffast.obj inflate.obj inftrees.obj &
+ trees.obj uncompr.obj zutil.obj
+
+CC = wcc386
+LINKER = wcl386
+CFLAGS = -zq -mf -3r -fp3 -s -bt=dos -oilrtfm -fr=nul -wx
+ZLIB_LIB = zlib_f.lib
+
+.C.OBJ:
+ $(CC) $(CFLAGS) $[@
+
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+$(ZLIB_LIB): $(OBJS)
+ wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj
+ wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj
+ wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj
+ wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj
+ wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj
+
+example.exe: $(ZLIB_LIB) example.obj
+ $(LINKER) -ldos32a -fe=example.exe example.obj $(ZLIB_LIB)
+
+minigzip.exe: $(ZLIB_LIB) minigzip.obj
+ $(LINKER) -ldos32a -fe=minigzip.exe minigzip.obj $(ZLIB_LIB)
+
+clean: .SYMBOLIC
+ del *.obj
+ del $(ZLIB_LIB)
+ @echo Cleaning done
--- /dev/null
+# Makefile for zlib
+# OpenWatcom large model
+# Last updated: 28-Dec-2005
+
+# To use, do "wmake -f watcom_l.mak"
+
+C_SOURCE = adler32.c compress.c crc32.c deflate.c &
+ gzclose.c gzlib.c gzread.c gzwrite.c &
+ infback.c inffast.c inflate.c inftrees.c &
+ trees.c uncompr.c zutil.c
+
+OBJS = adler32.obj compress.obj crc32.obj deflate.obj &
+ gzclose.obj gzlib.obj gzread.obj gzwrite.obj &
+ infback.obj inffast.obj inflate.obj inftrees.obj &
+ trees.obj uncompr.obj zutil.obj
+
+CC = wcc
+LINKER = wcl
+CFLAGS = -zq -ml -s -bt=dos -oilrtfm -fr=nul -wx
+ZLIB_LIB = zlib_l.lib
+
+.C.OBJ:
+ $(CC) $(CFLAGS) $[@
+
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+$(ZLIB_LIB): $(OBJS)
+ wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj
+ wlib -b -c $(ZLIB_LIB) -+gzclose.obj -+gzlib.obj -+gzread.obj -+gzwrite.obj
+ wlib -b -c $(ZLIB_LIB) -+deflate.obj -+infback.obj
+ wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj
+ wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj
+
+example.exe: $(ZLIB_LIB) example.obj
+ $(LINKER) -fe=example.exe example.obj $(ZLIB_LIB)
+
+minigzip.exe: $(ZLIB_LIB) minigzip.obj
+ $(LINKER) -fe=minigzip.exe minigzip.obj $(ZLIB_LIB)
+
+clean: .SYMBOLIC
+ del *.obj
+ del $(ZLIB_LIB)
+ @echo Cleaning done
--- /dev/null
+
+ Frequently Asked Questions about ZLIB1.DLL
+
+
+This document describes the design, the rationale, and the usage
+of the official DLL build of zlib, named ZLIB1.DLL. If you have
+general questions about zlib, you should see the file "FAQ" found
+in the zlib distribution, or at the following location:
+ http://www.gzip.org/zlib/zlib_faq.html
+
+
+ 1. What is ZLIB1.DLL, and how can I get it?
+
+ - ZLIB1.DLL is the official build of zlib as a DLL.
+ (Please remark the character '1' in the name.)
+
+ Pointers to a precompiled ZLIB1.DLL can be found in the zlib
+ web site at:
+ http://www.zlib.net/
+
+ Applications that link to ZLIB1.DLL can rely on the following
+ specification:
+
+ * The exported symbols are exclusively defined in the source
+ files "zlib.h" and "zlib.def", found in an official zlib
+ source distribution.
+ * The symbols are exported by name, not by ordinal.
+ * The exported names are undecorated.
+ * The calling convention of functions is "C" (CDECL).
+ * The ZLIB1.DLL binary is linked to MSVCRT.DLL.
+
+ The archive in which ZLIB1.DLL is bundled contains compiled
+ test programs that must run with a valid build of ZLIB1.DLL.
+ It is recommended to download the prebuilt DLL from the zlib
+ web site, instead of building it yourself, to avoid potential
+ incompatibilities that could be introduced by your compiler
+ and build settings. If you do build the DLL yourself, please
+ make sure that it complies with all the above requirements,
+ and it runs with the precompiled test programs, bundled with
+ the original ZLIB1.DLL distribution.
+
+ If, for any reason, you need to build an incompatible DLL,
+ please use a different file name.
+
+
+ 2. Why did you change the name of the DLL to ZLIB1.DLL?
+ What happened to the old ZLIB.DLL?
+
+ - The old ZLIB.DLL, built from zlib-1.1.4 or earlier, required
+ compilation settings that were incompatible to those used by
+ a static build. The DLL settings were supposed to be enabled
+ by defining the macro ZLIB_DLL, before including "zlib.h".
+ Incorrect handling of this macro was silently accepted at
+ build time, resulting in two major problems:
+
+ * ZLIB_DLL was missing from the old makefile. When building
+ the DLL, not all people added it to the build options. In
+ consequence, incompatible incarnations of ZLIB.DLL started
+ to circulate around the net.
+
+ * When switching from using the static library to using the
+ DLL, applications had to define the ZLIB_DLL macro and
+ to recompile all the sources that contained calls to zlib
+ functions. Failure to do so resulted in creating binaries
+ that were unable to run with the official ZLIB.DLL build.
+
+ The only possible solution that we could foresee was to make
+ a binary-incompatible change in the DLL interface, in order to
+ remove the dependency on the ZLIB_DLL macro, and to release
+ the new DLL under a different name.
+
+ We chose the name ZLIB1.DLL, where '1' indicates the major
+ zlib version number. We hope that we will not have to break
+ the binary compatibility again, at least not as long as the
+ zlib-1.x series will last.
+
+ There is still a ZLIB_DLL macro, that can trigger a more
+ efficient build and use of the DLL, but compatibility no
+ longer dependents on it.
+
+
+ 3. Can I build ZLIB.DLL from the new zlib sources, and replace
+ an old ZLIB.DLL, that was built from zlib-1.1.4 or earlier?
+
+ - In principle, you can do it by assigning calling convention
+ keywords to the macros ZEXPORT and ZEXPORTVA. In practice,
+ it depends on what you mean by "an old ZLIB.DLL", because the
+ old DLL exists in several mutually-incompatible versions.
+ You have to find out first what kind of calling convention is
+ being used in your particular ZLIB.DLL build, and to use the
+ same one in the new build. If you don't know what this is all
+ about, you might be better off if you would just leave the old
+ DLL intact.
+
+
+ 4. Can I compile my application using the new zlib interface, and
+ link it to an old ZLIB.DLL, that was built from zlib-1.1.4 or
+ earlier?
+
+ - The official answer is "no"; the real answer depends again on
+ what kind of ZLIB.DLL you have. Even if you are lucky, this
+ course of action is unreliable.
+
+ If you rebuild your application and you intend to use a newer
+ version of zlib (post- 1.1.4), it is strongly recommended to
+ link it to the new ZLIB1.DLL.
+
+
+ 5. Why are the zlib symbols exported by name, and not by ordinal?
+
+ - Although exporting symbols by ordinal is a little faster, it
+ is risky. Any single glitch in the maintenance or use of the
+ DEF file that contains the ordinals can result in incompatible
+ builds and frustrating crashes. Simply put, the benefits of
+ exporting symbols by ordinal do not justify the risks.
+
+ Technically, it should be possible to maintain ordinals in
+ the DEF file, and still export the symbols by name. Ordinals
+ exist in every DLL, and even if the dynamic linking performed
+ at the DLL startup is searching for names, ordinals serve as
+ hints, for a faster name lookup. However, if the DEF file
+ contains ordinals, the Microsoft linker automatically builds
+ an implib that will cause the executables linked to it to use
+ those ordinals, and not the names. It is interesting to
+ notice that the GNU linker for Win32 does not suffer from this
+ problem.
+
+ It is possible to avoid the DEF file if the exported symbols
+ are accompanied by a "__declspec(dllexport)" attribute in the
+ source files. You can do this in zlib by predefining the
+ ZLIB_DLL macro.
+
+
+ 6. I see that the ZLIB1.DLL functions use the "C" (CDECL) calling
+ convention. Why not use the STDCALL convention?
+ STDCALL is the standard convention in Win32, and I need it in
+ my Visual Basic project!
+
+ (For readability, we use CDECL to refer to the convention
+ triggered by the "__cdecl" keyword, STDCALL to refer to
+ the convention triggered by "__stdcall", and FASTCALL to
+ refer to the convention triggered by "__fastcall".)
+
+ - Most of the native Windows API functions (without varargs) use
+ indeed the WINAPI convention (which translates to STDCALL in
+ Win32), but the standard C functions use CDECL. If a user
+ application is intrinsically tied to the Windows API (e.g.
+ it calls native Windows API functions such as CreateFile()),
+ sometimes it makes sense to decorate its own functions with
+ WINAPI. But if ANSI C or POSIX portability is a goal (e.g.
+ it calls standard C functions such as fopen()), it is not a
+ sound decision to request the inclusion of <windows.h>, or to
+ use non-ANSI constructs, for the sole purpose to make the user
+ functions STDCALL-able.
+
+ The functionality offered by zlib is not in the category of
+ "Windows functionality", but is more like "C functionality".
+
+ Technically, STDCALL is not bad; in fact, it is slightly
+ faster than CDECL, and it works with variable-argument
+ functions, just like CDECL. It is unfortunate that, in spite
+ of using STDCALL in the Windows API, it is not the default
+ convention used by the C compilers that run under Windows.
+ The roots of the problem reside deep inside the unsafety of
+ the K&R-style function prototypes, where the argument types
+ are not specified; but that is another story for another day.
+
+ The remaining fact is that CDECL is the default convention.
+ Even if an explicit convention is hard-coded into the function
+ prototypes inside C headers, problems may appear. The
+ necessity to expose the convention in users' callbacks is one
+ of these problems.
+
+ The calling convention issues are also important when using
+ zlib in other programming languages. Some of them, like Ada
+ (GNAT) and Fortran (GNU G77), have C bindings implemented
+ initially on Unix, and relying on the C calling convention.
+ On the other hand, the pre- .NET versions of Microsoft Visual
+ Basic require STDCALL, while Borland Delphi prefers, although
+ it does not require, FASTCALL.
+
+ In fairness to all possible uses of zlib outside the C
+ programming language, we choose the default "C" convention.
+ Anyone interested in different bindings or conventions is
+ encouraged to maintain specialized projects. The "contrib/"
+ directory from the zlib distribution already holds a couple
+ of foreign bindings, such as Ada, C++, and Delphi.
+
+
+ 7. I need a DLL for my Visual Basic project. What can I do?
+
+ - Define the ZLIB_WINAPI macro before including "zlib.h", when
+ building both the DLL and the user application (except that
+ you don't need to define anything when using the DLL in Visual
+ Basic). The ZLIB_WINAPI macro will switch on the WINAPI
+ (STDCALL) convention. The name of this DLL must be different
+ than the official ZLIB1.DLL.
+
+ Gilles Vollant has contributed a build named ZLIBWAPI.DLL,
+ with the ZLIB_WINAPI macro turned on, and with the minizip
+ functionality built in. For more information, please read
+ the notes inside "contrib/vstudio/readme.txt", found in the
+ zlib distribution.
+
+
+ 8. I need to use zlib in my Microsoft .NET project. What can I
+ do?
+
+ - Henrik Ravn has contributed a .NET wrapper around zlib. Look
+ into contrib/dotzlib/, inside the zlib distribution.
+
+
+ 9. If my application uses ZLIB1.DLL, should I link it to
+ MSVCRT.DLL? Why?
+
+ - It is not required, but it is recommended to link your
+ application to MSVCRT.DLL, if it uses ZLIB1.DLL.
+
+ The executables (.EXE, .DLL, etc.) that are involved in the
+ same process and are using the C run-time library (i.e. they
+ are calling standard C functions), must link to the same
+ library. There are several libraries in the Win32 system:
+ CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc.
+ Since ZLIB1.DLL is linked to MSVCRT.DLL, the executables that
+ depend on it should also be linked to MSVCRT.DLL.
+
+
+10. Why are you saying that ZLIB1.DLL and my application should
+ be linked to the same C run-time (CRT) library? I linked my
+ application and my DLLs to different C libraries (e.g. my
+ application to a static library, and my DLLs to MSVCRT.DLL),
+ and everything works fine.
+
+ - If a user library invokes only pure Win32 API (accessible via
+ <windows.h> and the related headers), its DLL build will work
+ in any context. But if this library invokes standard C API,
+ things get more complicated.
+
+ There is a single Win32 library in a Win32 system. Every
+ function in this library resides in a single DLL module, that
+ is safe to call from anywhere. On the other hand, there are
+ multiple versions of the C library, and each of them has its
+ own separate internal state. Standalone executables and user
+ DLLs that call standard C functions must link to a C run-time
+ (CRT) library, be it static or shared (DLL). Intermixing
+ occurs when an executable (not necessarily standalone) and a
+ DLL are linked to different CRTs, and both are running in the
+ same process.
+
+ Intermixing multiple CRTs is possible, as long as their
+ internal states are kept intact. The Microsoft Knowledge Base
+ articles KB94248 "HOWTO: Use the C Run-Time" and KB140584
+ "HOWTO: Link with the Correct C Run-Time (CRT) Library"
+ mention the potential problems raised by intermixing.
+
+ If intermixing works for you, it's because your application
+ and DLLs are avoiding the corruption of each of the CRTs'
+ internal states, maybe by careful design, or maybe by fortune.
+
+ Also note that linking ZLIB1.DLL to non-Microsoft CRTs, such
+ as those provided by Borland, raises similar problems.
+
+
+11. Why are you linking ZLIB1.DLL to MSVCRT.DLL?
+
+ - MSVCRT.DLL exists on every Windows 95 with a new service pack
+ installed, or with Microsoft Internet Explorer 4 or later, and
+ on all other Windows 4.x or later (Windows 98, Windows NT 4,
+ or later). It is freely distributable; if not present in the
+ system, it can be downloaded from Microsoft or from other
+ software provider for free.
+
+ The fact that MSVCRT.DLL does not exist on a virgin Windows 95
+ is not so problematic. Windows 95 is scarcely found nowadays,
+ Microsoft ended its support a long time ago, and many recent
+ applications from various vendors, including Microsoft, do not
+ even run on it. Furthermore, no serious user should run
+ Windows 95 without a proper update installed.
+
+
+12. Why are you not linking ZLIB1.DLL to
+ <<my favorite C run-time library>> ?
+
+ - We considered and abandoned the following alternatives:
+
+ * Linking ZLIB1.DLL to a static C library (LIBC.LIB, or
+ LIBCMT.LIB) is not a good option. People are using the DLL
+ mainly to save disk space. If you are linking your program
+ to a static C library, you may as well consider linking zlib
+ in statically, too.
+
+ * Linking ZLIB1.DLL to CRTDLL.DLL looks appealing, because
+ CRTDLL.DLL is present on every Win32 installation.
+ Unfortunately, it has a series of problems: it does not
+ work properly with Microsoft's C++ libraries, it does not
+ provide support for 64-bit file offsets, (and so on...),
+ and Microsoft discontinued its support a long time ago.
+
+ * Linking ZLIB1.DLL to MSVCR70.DLL or MSVCR71.DLL, supplied
+ with the Microsoft .NET platform, and Visual C++ 7.0/7.1,
+ raises problems related to the status of ZLIB1.DLL as a
+ system component. According to the Microsoft Knowledge Base
+ article KB326922 "INFO: Redistribution of the Shared C
+ Runtime Component in Visual C++ .NET", MSVCR70.DLL and
+ MSVCR71.DLL are not supposed to function as system DLLs,
+ because they may clash with MSVCRT.DLL. Instead, the
+ application's installer is supposed to put these DLLs
+ (if needed) in the application's private directory.
+ If ZLIB1.DLL depends on a non-system runtime, it cannot
+ function as a redistributable system component.
+
+ * Linking ZLIB1.DLL to non-Microsoft runtimes, such as
+ Borland's, or Cygwin's, raises problems related to the
+ reliable presence of these runtimes on Win32 systems.
+ It's easier to let the DLL build of zlib up to the people
+ who distribute these runtimes, and who may proceed as
+ explained in the answer to Question 14.
+
+
+13. If ZLIB1.DLL cannot be linked to MSVCR70.DLL or MSVCR71.DLL,
+ how can I build/use ZLIB1.DLL in Microsoft Visual C++ 7.0
+ (Visual Studio .NET) or newer?
+
+ - Due to the problems explained in the Microsoft Knowledge Base
+ article KB326922 (see the previous answer), the C runtime that
+ comes with the VC7 environment is no longer considered a
+ system component. That is, it should not be assumed that this
+ runtime exists, or may be installed in a system directory.
+ Since ZLIB1.DLL is supposed to be a system component, it may
+ not depend on a non-system component.
+
+ In order to link ZLIB1.DLL and your application to MSVCRT.DLL
+ in VC7, you need the library of Visual C++ 6.0 or older. If
+ you don't have this library at hand, it's probably best not to
+ use ZLIB1.DLL.
+
+ We are hoping that, in the future, Microsoft will provide a
+ way to build applications linked to a proper system runtime,
+ from the Visual C++ environment. Until then, you have a
+ couple of alternatives, such as linking zlib in statically.
+ If your application requires dynamic linking, you may proceed
+ as explained in the answer to Question 14.
+
+
+14. I need to link my own DLL build to a CRT different than
+ MSVCRT.DLL. What can I do?
+
+ - Feel free to rebuild the DLL from the zlib sources, and link
+ it the way you want. You should, however, clearly state that
+ your build is unofficial. You should give it a different file
+ name, and/or install it in a private directory that can be
+ accessed by your application only, and is not visible to the
+ others (i.e. it's neither in the PATH, nor in the SYSTEM or
+ SYSTEM32 directories). Otherwise, your build may clash with
+ applications that link to the official build.
+
+ For example, in Cygwin, zlib is linked to the Cygwin runtime
+ CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL.
+
+
+15. May I include additional pieces of code that I find useful,
+ link them in ZLIB1.DLL, and export them?
+
+ - No. A legitimate build of ZLIB1.DLL must not include code
+ that does not originate from the official zlib source code.
+ But you can make your own private DLL build, under a different
+ file name, as suggested in the previous answer.
+
+ For example, zlib is a part of the VCL library, distributed
+ with Borland Delphi and C++ Builder. The DLL build of VCL
+ is a redistributable file, named VCLxx.DLL.
+
+
+16. May I remove some functionality out of ZLIB1.DLL, by enabling
+ macros like NO_GZCOMPRESS or NO_GZIP at compile time?
+
+ - No. A legitimate build of ZLIB1.DLL must provide the complete
+ zlib functionality, as implemented in the official zlib source
+ code. But you can make your own private DLL build, under a
+ different file name, as suggested in the previous answer.
+
+
+17. I made my own ZLIB1.DLL build. Can I test it for compliance?
+
+ - We prefer that you download the official DLL from the zlib
+ web site. If you need something peculiar from this DLL, you
+ can send your suggestion to the zlib mailing list.
+
+ However, in case you do rebuild the DLL yourself, you can run
+ it with the test programs found in the DLL distribution.
+ Running these test programs is not a guarantee of compliance,
+ but a failure can imply a detected problem.
+
+**
+
+This document is written and maintained by
+Cosmin Truta <cosmint@cs.ubbcluj.ro>
--- /dev/null
+# Makefile for zlib
+# Borland C++ for Win32
+#
+# Usage:
+# make -f win32/Makefile.bor
+# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj
+
+# ------------ Borland C++ ------------
+
+# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or
+# added to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+CC = bcc32
+AS = bcc32
+LD = bcc32
+AR = tlib
+CFLAGS = -a -d -k- -O2 $(LOC)
+ASFLAGS = $(LOC)
+LDFLAGS = $(LOC)
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+#OBJA =
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+#OBJPA=
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $<
+
+.asm.obj:
+ $(AS) -c $(ASFLAGS) $<
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2) $(OBJA)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+ $(AR) $(ZLIB_LIB) $(OBJPA)
+
+
+# testing
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+ -del $(ZLIB_LIB)
+ -del *.obj
+ -del *.exe
+ -del *.tds
+ -del zlib.bak
+ -del foo.gz
--- /dev/null
+# Makefile for zlib, derived from Makefile.dj2.
+# Modified for mingw32 by C. Spieler, 6/16/98.
+# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003.
+# Last updated: Mar 2012.
+# Tested under Cygwin and MinGW.
+
+# Copyright (C) 1995-2003 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type from the top level zlib directory:
+#
+# make -fwin32/Makefile.gcc; make test testdll -fwin32/Makefile.gcc
+#
+# To use the asm code, type:
+# cp contrib/asm?86/match.S ./match.S
+# make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc
+#
+# To install libz.a, zconf.h and zlib.h in the system directories, type:
+#
+# make install -fwin32/Makefile.gcc
+#
+# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
+#
+# To install the shared lib, append SHARED_MODE=1 to the make command :
+#
+# make install -fwin32/Makefile.gcc SHARED_MODE=1
+
+# Note:
+# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN),
+# the DLL name should be changed from "zlib1.dll".
+
+STATICLIB = libz.a
+SHAREDLIB = zlib1.dll
+IMPLIB = libz.dll.a
+
+#
+# Set to 1 if shared object needs to be installed
+#
+SHARED_MODE=0
+
+#LOC = -DASMV
+#LOC = -DDEBUG -g
+
+PREFIX =
+CC = $(PREFIX)gcc
+CFLAGS = $(LOC) -O3 -Wall
+
+AS = $(CC)
+ASFLAGS = $(LOC) -Wall
+
+LD = $(CC)
+LDFLAGS = $(LOC)
+
+AR = $(PREFIX)ar
+ARFLAGS = rcs
+
+RC = $(PREFIX)windres
+RCFLAGS = --define GCC_WINDRES
+
+STRIP = $(PREFIX)strip
+
+CP = cp -fp
+# If GNU install is available, replace $(CP) with install.
+INSTALL = $(CP)
+RM = rm -f
+
+prefix ?= /usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
+ gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
+OBJA =
+
+all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example.exe minigzip.exe example_d.exe minigzip_d.exe
+
+test: example.exe minigzip.exe
+ ./example
+ echo hello world | ./minigzip | ./minigzip -d
+
+testdll: example_d.exe minigzip_d.exe
+ ./example_d
+ echo hello world | ./minigzip_d | ./minigzip_d -d
+
+.c.o:
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+.S.o:
+ $(AS) $(ASFLAGS) -c -o $@ $<
+
+$(STATICLIB): $(OBJS) $(OBJA)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA)
+
+$(IMPLIB): $(SHAREDLIB)
+
+$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
+ $(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \
+ -o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
+ $(STRIP) $@
+
+example.exe: example.o $(STATICLIB)
+ $(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB)
+ $(STRIP) $@
+
+minigzip.exe: minigzip.o $(STATICLIB)
+ $(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB)
+ $(STRIP) $@
+
+example_d.exe: example.o $(IMPLIB)
+ $(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB)
+ $(STRIP) $@
+
+minigzip_d.exe: minigzip.o $(IMPLIB)
+ $(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
+ $(STRIP) $@
+
+example.o: test/example.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ test/example.c
+
+minigzip.o: test/minigzip.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
+
+zlibrc.o: win32/zlib1.rc
+ $(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
+
+.PHONY: install uninstall clean
+
+install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
+ @if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \
+ echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \
+ exit 1; \
+ fi
+ -@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)'
+ -@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig
+ -if [ "$(SHARED_MODE)" = "1" ]; then \
+ mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \
+ $(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \
+ $(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \
+ fi
+ -$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)'
+ -$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)'
+ -$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)'
+ sed \
+ -e 's|@prefix@|${prefix}|g' \
+ -e 's|@exec_prefix@|${exec_prefix}|g' \
+ -e 's|@libdir@|$(LIBRARY_PATH)|g' \
+ -e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
+ -e 's|@includedir@|$(INCLUDE_PATH)|g' \
+ -e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
+ zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc
+
+uninstall:
+ -if [ "$(SHARED_MODE)" = "1" ]; then \
+ $(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \
+ $(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \
+ fi
+ -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h
+ -$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h
+ -$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB)
+
+clean:
+ -$(RM) $(STATICLIB)
+ -$(RM) $(SHAREDLIB)
+ -$(RM) $(IMPLIB)
+ -$(RM) *.o
+ -$(RM) *.exe
+ -$(RM) foo.gz
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+# Makefile for zlib using Microsoft (Visual) C
+# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
+#
+# Usage:
+# nmake -f win32/Makefile.msc (standard build)
+# nmake -f win32/Makefile.msc LOC=-DFOO (nonstandard build)
+# nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \
+# OBJA="inffas32.obj match686.obj" (use ASM code, x86)
+# nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \
+# OBJA="inffasx64.obj gvmat64.obj inffas8664.obj" (use ASM code, x64)
+
+# The toplevel directory of the source tree.
+#
+TOP = .
+
+# optional build flags
+LOC =
+
+# variables
+STATICLIB = zlib.lib
+SHAREDLIB = zlib1.dll
+IMPLIB = zdll.lib
+
+CC = cl
+AS = ml
+LD = link
+AR = lib
+RC = rc
+CFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC)
+WFLAGS = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
+ASFLAGS = -coff -Zi $(LOC)
+LDFLAGS = -nologo -debug -incremental:no -opt:ref
+ARFLAGS = -nologo
+RCFLAGS = /dWIN32 /r
+
+OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \
+ gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj
+OBJA =
+
+
+# targets
+all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) \
+ example.exe minigzip.exe example_d.exe minigzip_d.exe
+
+$(STATICLIB): $(OBJS) $(OBJA)
+ $(AR) $(ARFLAGS) -out:$@ $(OBJS) $(OBJA)
+
+$(IMPLIB): $(SHAREDLIB)
+
+$(SHAREDLIB): $(TOP)/win32/zlib.def $(OBJS) $(OBJA) zlib1.res
+ $(LD) $(LDFLAGS) -def:$(TOP)/win32/zlib.def -dll -implib:$(IMPLIB) \
+ -out:$@ -base:0x5A4C0000 $(OBJS) $(OBJA) zlib1.res
+ if exist $@.manifest \
+ mt -nologo -manifest $@.manifest -outputresource:$@;2
+
+example.exe: example.obj $(STATICLIB)
+ $(LD) $(LDFLAGS) example.obj $(STATICLIB)
+ if exist $@.manifest \
+ mt -nologo -manifest $@.manifest -outputresource:$@;1
+
+minigzip.exe: minigzip.obj $(STATICLIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(STATICLIB)
+ if exist $@.manifest \
+ mt -nologo -manifest $@.manifest -outputresource:$@;1
+
+example_d.exe: example.obj $(IMPLIB)
+ $(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB)
+ if exist $@.manifest \
+ mt -nologo -manifest $@.manifest -outputresource:$@;1
+
+minigzip_d.exe: minigzip.obj $(IMPLIB)
+ $(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB)
+ if exist $@.manifest \
+ mt -nologo -manifest $@.manifest -outputresource:$@;1
+
+{$(TOP)}.c.obj:
+ $(CC) -c $(WFLAGS) $(CFLAGS) $<
+
+{$(TOP)/test}.c.obj:
+ $(CC) -c -I$(TOP) $(WFLAGS) $(CFLAGS) $<
+
+{$(TOP)/contrib/masmx64}.c.obj:
+ $(CC) -c $(WFLAGS) $(CFLAGS) $<
+
+{$(TOP)/contrib/masmx64}.asm.obj:
+ $(AS) -c $(ASFLAGS) $<
+
+{$(TOP)/contrib/masmx86}.asm.obj:
+ $(AS) -c $(ASFLAGS) $<
+
+adler32.obj: $(TOP)/adler32.c $(TOP)/zlib.h $(TOP)/zconf.h
+
+compress.obj: $(TOP)/compress.c $(TOP)/zlib.h $(TOP)/zconf.h
+
+crc32.obj: $(TOP)/crc32.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/crc32.h
+
+deflate.obj: $(TOP)/deflate.c $(TOP)/deflate.h $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h
+
+gzclose.obj: $(TOP)/gzclose.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h
+
+gzlib.obj: $(TOP)/gzlib.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h
+
+gzread.obj: $(TOP)/gzread.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h
+
+gzwrite.obj: $(TOP)/gzwrite.c $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/gzguts.h
+
+infback.obj: $(TOP)/infback.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \
+ $(TOP)/inffast.h $(TOP)/inffixed.h
+
+inffast.obj: $(TOP)/inffast.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \
+ $(TOP)/inffast.h
+
+inflate.obj: $(TOP)/inflate.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h $(TOP)/inflate.h \
+ $(TOP)/inffast.h $(TOP)/inffixed.h
+
+inftrees.obj: $(TOP)/inftrees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/inftrees.h
+
+trees.obj: $(TOP)/trees.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h $(TOP)/deflate.h $(TOP)/trees.h
+
+uncompr.obj: $(TOP)/uncompr.c $(TOP)/zlib.h $(TOP)/zconf.h
+
+zutil.obj: $(TOP)/zutil.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h
+
+gvmat64.obj: $(TOP)/contrib\masmx64\gvmat64.asm
+
+inffasx64.obj: $(TOP)/contrib\masmx64\inffasx64.asm
+
+inffas8664.obj: $(TOP)/contrib\masmx64\inffas8664.c $(TOP)/zutil.h $(TOP)/zlib.h $(TOP)/zconf.h \
+ $(TOP)/inftrees.h $(TOP)/inflate.h $(TOP)/inffast.h
+
+inffas32.obj: $(TOP)/contrib\masmx86\inffas32.asm
+
+match686.obj: $(TOP)/contrib\masmx86\match686.asm
+
+example.obj: $(TOP)/test/example.c $(TOP)/zlib.h $(TOP)/zconf.h
+
+minigzip.obj: $(TOP)/test/minigzip.c $(TOP)/zlib.h $(TOP)/zconf.h
+
+zlib1.res: $(TOP)/win32/zlib1.rc
+ $(RC) $(RCFLAGS) /fo$@ $(TOP)/win32/zlib1.rc
+
+# testing
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+testdll: example_d.exe minigzip_d.exe
+ example_d
+ echo hello world | minigzip_d | minigzip_d -d
+
+
+# cleanup
+clean:
+ -del $(STATICLIB)
+ -del $(SHAREDLIB)
+ -del $(IMPLIB)
+ -del *.obj
+ -del *.res
+ -del *.exp
+ -del *.exe
+ -del *.pdb
+ -del *.manifest
+ -del foo.gz
--- /dev/null
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.8 is a general purpose data compression library. All the code is
+thread safe. The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org). Two compiled
+examples are distributed in this package, example and minigzip. The example_d
+and minigzip_d flavors validate that the zlib1.dll file is working correctly.
+
+Questions about zlib should be sent to <zlib@gzip.org>. The zlib home page
+is http://zlib.net/ . Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html
+before asking for help.
+
+
+Manifest:
+
+The package zlib-1.2.8-win32-x86.zip will contain the following files:
+
+ README-WIN32.txt This document
+ ChangeLog Changes since previous zlib packages
+ DLL_FAQ.txt Frequently asked questions about zlib1.dll
+ zlib.3.pdf Documentation of this library in Adobe Acrobat format
+
+ example.exe A statically-bound example (using zlib.lib, not the dll)
+ example.pdb Symbolic information for debugging example.exe
+
+ example_d.exe A zlib1.dll bound example (using zdll.lib)
+ example_d.pdb Symbolic information for debugging example_d.exe
+
+ minigzip.exe A statically-bound test program (using zlib.lib, not the dll)
+ minigzip.pdb Symbolic information for debugging minigzip.exe
+
+ minigzip_d.exe A zlib1.dll bound test program (using zdll.lib)
+ minigzip_d.pdb Symbolic information for debugging minigzip_d.exe
+
+ zlib.h Install these files into the compilers' INCLUDE path to
+ zconf.h compile programs which use zlib.lib or zdll.lib
+
+ zdll.lib Install these files into the compilers' LIB path if linking
+ zdll.exp a compiled program to the zlib1.dll binary
+
+ zlib.lib Install these files into the compilers' LIB path to link zlib
+ zlib.pdb into compiled programs, without zlib1.dll runtime dependency
+ (zlib.pdb provides debugging info to the compile time linker)
+
+ zlib1.dll Install this binary shared library into the system PATH, or
+ the program's runtime directory (where the .exe resides)
+ zlib1.pdb Install in the same directory as zlib1.dll, in order to debug
+ an application crash using WinDbg or similar tools.
+
+All .pdb files above are entirely optional, but are very useful to a developer
+attempting to diagnose program misbehavior or a crash. Many additional
+important files for developers can be found in the zlib127.zip source package
+available from http://zlib.net/ - review that package's README file for details.
+
+
+Acknowledgments:
+
+The deflate format used by zlib was defined by Phil Katz. The deflate and
+zlib specifications were written by L. Peter Deutsch. Thanks to all the
+people who reported problems and suggested various improvements in zlib; they
+are too numerous to cite here.
+
+
+Copyright notice:
+
+ (C) 1995-2012 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign. The sources are provided for free but without
+warranty of any kind. The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes. Please read
+the FAQ for more information on the distribution of modified source versions.
--- /dev/null
+
+To build zlib using the Microsoft Visual C++ environment,
+use the appropriate project from the projects/ directory.
--- /dev/null
+; zlib data compression library
+EXPORTS
+; basic functions
+ zlibVersion
+ deflate
+ deflateEnd
+ inflate
+ inflateEnd
+; advanced functions
+ deflateSetDictionary
+ deflateCopy
+ deflateReset
+ deflateParams
+ deflateTune
+ deflateBound
+ deflatePending
+ deflatePrime
+ deflateSetHeader
+ inflateSetDictionary
+ inflateGetDictionary
+ inflateSync
+ inflateCopy
+ inflateReset
+ inflateReset2
+ inflatePrime
+ inflateMark
+ inflateGetHeader
+ inflateBack
+ inflateBackEnd
+ zlibCompileFlags
+; utility functions
+ compress
+ compress2
+ compressBound
+ uncompress
+ gzopen
+ gzdopen
+ gzbuffer
+ gzsetparams
+ gzread
+ gzwrite
+ gzprintf
+ gzvprintf
+ gzputs
+ gzgets
+ gzputc
+ gzgetc
+ gzungetc
+ gzflush
+ gzseek
+ gzrewind
+ gztell
+ gzoffset
+ gzeof
+ gzdirect
+ gzclose
+ gzclose_r
+ gzclose_w
+ gzerror
+ gzclearerr
+; large file functions
+ gzopen64
+ gzseek64
+ gztell64
+ gzoffset64
+ adler32_combine64
+ crc32_combine64
+; checksum functions
+ adler32
+ crc32
+ adler32_combine
+ crc32_combine
+; various hacks, don't look :)
+ deflateInit_
+ deflateInit2_
+ inflateInit_
+ inflateInit2_
+ inflateBackInit_
+ gzgetc_
+ zError
+ inflateSyncPoint
+ get_crc_table
+ inflateUndermine
+ inflateResetKeep
+ deflateResetKeep
+ gzopen_w
--- /dev/null
+#include <winver.h>
+#include "../zlib.h"
+
+#ifdef GCC_WINDRES
+VS_VERSION_INFO VERSIONINFO
+#else
+VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+#endif
+ FILEVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0
+ PRODUCTVERSION ZLIB_VER_MAJOR,ZLIB_VER_MINOR,ZLIB_VER_REVISION,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+#ifdef _DEBUG
+ FILEFLAGS 1
+#else
+ FILEFLAGS 0
+#endif
+ FILEOS VOS__WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+ BEGIN
+ VALUE "FileDescription", "zlib data compression library\0"
+ VALUE "FileVersion", ZLIB_VERSION "\0"
+ VALUE "InternalName", "zlib1.dll\0"
+ VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+ VALUE "OriginalFilename", "zlib1.dll\0"
+ VALUE "ProductName", "zlib\0"
+ VALUE "ProductVersion", ZLIB_VERSION "\0"
+ VALUE "Comments", "For more information visit http://www.zlib.net/\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
--- /dev/null
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzvprintf z_gzvprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateResetKeep z_inflateResetKeep
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
+# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
+#else
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+#cmakedefine Z_PREFIX
+#cmakedefine Z_HAVE_UNISTD_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzvprintf z_gzvprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateResetKeep z_inflateResetKeep
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
+# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
+#else
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzvprintf z_gzvprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateResetKeep z_inflateResetKeep
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
+# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
+#else
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null
+.TH ZLIB 3 "28 Apr 2013"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe, assuming that the standard library functions
+used are thread safe, such as memory allocation routines.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms may be added later
+with the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.IR gzip (1)
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler.
+The decoder checks the consistency of the compressed data,
+so the library should never crash even in the case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h .
+The distribution source includes examples of use of the library
+in the files
+.I test/example.c
+and
+.IR test/minigzip.c,
+as well as other examples in the
+.IR examples/
+directory.
+.LP
+Changes to this version are documented in the file
+.I ChangeLog
+that accompanies the source.
+.LP
+.I zlib
+is available in Java using the java.util.zip package:
+.IP
+http://java.sun.com/developer/technicalArticles/Programming/compression/
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmqs@cpan.org),
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+including:
+.IP
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/
+.LP
+A Python interface to
+.IR zlib ,
+written by A.M. Kuchling (amk@magnet.com),
+is available in Python 1.5 and later versions:
+.IP
+http://docs.python.org/library/zlib.html
+.LP
+.I zlib
+is built into
+.IR tcl:
+.IP
+http://wiki.tcl.tk/4610
+.LP
+An experimental package to read and write files in .zip format,
+written on top of
+.I zlib
+by Gilles Vollant (info@winimage.com),
+is available at:
+.IP
+http://www.winimage.com/zLibDll/minizip.html
+and also in the
+.I contrib/minizip
+directory of the main
+.I zlib
+source distribution.
+.SH "SEE ALSO"
+The
+.I zlib
+web site can be found at:
+.IP
+http://zlib.net/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files:
+.IP
+http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
+.br
+http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
+.br
+http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
+.LP
+Mark Nelson wrote an article about
+.I zlib
+for the Jan. 1997 issue of Dr. Dobb's Journal;
+a copy of the article is available at:
+.IP
+http://marknelson.us/1997/01/01/zlib-engine/
+.SH "REPORTING PROBLEMS"
+Before reporting a problem,
+please check the
+.I zlib
+web site to verify that you have the latest version of
+.IR zlib ;
+otherwise,
+obtain the latest version and see if the problem still exists.
+Please read the
+.I zlib
+FAQ at:
+.IP
+http://zlib.net/zlib_faq.html
+.LP
+before asking for help.
+Send questions and/or comments to zlib@gzip.org,
+or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
+.SH AUTHORS
+Version 1.2.8
+Copyright (C) 1995-2013 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page
--- /dev/null
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.2.8, April 28th, 2013
+
+ Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+ (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.8"
+#define ZLIB_VERNUM 0x1280
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip streams in memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ z_const Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total number of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total number of bytes output so far */
+
+ z_const char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: binary or text */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use in the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications). Some
+ output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed code
+ block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the stream
+ are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least the
+ value returned by deflateBound (see below). Then deflate is guaranteed to
+ return Z_STREAM_END. If not enough output space is provided, deflate will
+ not return Z_STREAM_END, and it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect the
+ compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+ fatal, and deflate() can be called again with more input and more output
+ space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the
+ exact value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit() does not process any header information -- that is deferred
+ until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing will
+ resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all of the uncompressed data for the
+ operation to complete. (The size of the uncompressed data may have been
+ saved by the compressor for this purpose.) The use of Z_FINISH is not
+ required to perform an inflation in one step. However it may be used to
+ inform inflate that a faster approach can be used for the single inflate()
+ call. Z_FINISH also informs inflate to not maintain a sliding window if the
+ stream completes, which reduces inflate's memory footprint. If the stream
+ does not complete, either because not all of the stream is provided or not
+ enough output space is provided, then a sliding window will be allocated and
+ inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+ been used.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the effects of the flush parameter in this implementation are
+ on the return value of inflate() as noted below, when inflate() returns early
+ when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+ memory for a sliding window when Z_FINISH is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the Adler-32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained, so applications that need that information should
+ instead use raw inflate, see inflateInit2() below, or inflateBack() and
+ perform their own processing of the gzip header and trailer. When processing
+ gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+ producted so far. The CRC-32 is checked against the gzip trailer.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute an adler32 check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to 255 (unknown). If a
+ gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. When using the zlib format, this
+ function must be called immediately after deflateInit, deflateInit2 or
+ deflateReset, and before any call of deflate. When doing raw deflate, this
+ function must be called either before any call of deflate, or immediately
+ after the completion of a deflate block, i.e. after all input has been
+ consumed and all output has been delivered when using any of the flush
+ options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
+ compressor and decompressor must use exactly the same dictionary (see
+ inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
+
+ Upon return of this function, strm->adler is set to the adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.) If a raw deflate was requested, then the
+ adler32 value is not computed and strm->adler is not set.
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if not at a block boundary for raw deflate). deflateSetDictionary does
+ not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state. The
+ stream will keep the same compression level and any other attributes that
+ may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression level is changed, the input available so far is
+ compressed with the old level (and may be flushed); the new level will take
+ effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to be
+ compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+ strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate(). If that first deflate() call is provided the
+ sourceLen input bytes, an output buffer allocated to the size returned by
+ deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+ to return Z_STREAM_END. Note that it is possible for the compressed size to
+ be larger than the value returned by deflateBound() if flush options other
+ than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+ unsigned *pending,
+ int *bits));
+/*
+ deflatePending() returns the number of bytes and bits of output that have
+ been generated, but not yet provided in the available output. The bytes not
+ provided would be due to the available output space having being consumed.
+ The number of bits of output not provided are between 0 and 7, where they
+ await more bits to join them in order to fill out a full byte. If pending
+ or bits are Z_NULL, then those values are not set.
+
+ deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+ room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called at any
+ time to set the dictionary. If the provided dictionary is smaller than the
+ window and there is already data in the window, then the provided dictionary
+ will amend what's there. The application must insure that the dictionary
+ that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by inflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If inflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a possible full flush point (see above
+ for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+ All full flush points have this pattern, but not all occurrences of this
+ pattern are full flush points.
+
+ inflateSync returns Z_OK if a possible full flush point has been found,
+ Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+ has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+ In the success case, the application may save the current current value of
+ total_in which indicates where valid compressed data was found. In the
+ error case, the application may repeatedly call inflateSync, providing more
+ input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
+
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above or -1 << 16 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is potentially more efficient than
+ inflate() for file i/o applications, in that it avoids copying between the
+ output and the sliding window by simply making the window itself the output
+ buffer. inflate() can be faster on modern CPUs when used with large
+ buffers. inflateBack() trusts the application to not change the output
+ buffer passed by the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the normal
+ behavior of inflate(), which expects either a zlib or gzip header and
+ trailer around the deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero--buf is ignored in that
+ case--and inflateBack() will return a buffer error. inflateBack() will call
+ out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
+ should return zero on success, or non-zero on failure. If out() returns
+ non-zero, inflateBack() will return with an error. Neither in() nor out()
+ are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed buffer.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
+ the case where there is not enough room, uncompress() will fill the output
+ buffer with the uncompressed data up to that point.
+*/
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) 'T' will
+ request transparent writing or appending with no compression and not using
+ the gzip format.
+
+ "a" can be used instead of "w" to request that the gzip stream that will
+ be written be appended to the file. "+" will result in an error, since
+ reading and writing to the same gzip file is not supported. The addition of
+ "x" when writing will create the file exclusively, which fails if the file
+ already exists. On systems that support it, the addition of "e" when
+ reading or writing will set the flag to close the file on an execve() call.
+
+ These functions, as well as gzip, will read and decode a sequence of gzip
+ streams in a file. The append function of gzopen() can be used to create
+ such a file. (Also see gzflush() for another way to do this.) When
+ appending, gzopen does not test whether the file begins with a gzip stream,
+ nor does it look for the end of the gzip streams to begin appending. gzopen
+ will simply append a gzip stream to the existing file.
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression. When
+ reading, this will be detected automatically by looking for the magic two-
+ byte gzip header.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails. If you are using fileno() to get the
+ file descriptor from a FILE *, then you will have to use dup() to avoid
+ double-close()ing the file descriptor. Both gzclose() and fclose() will
+ close the associated file descriptor, so they need to have different file
+ descriptors.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Two buffers are allocated, either both of the specified size when
+ writing, or one of the specified size and the other twice that size when
+ reading. A larger buffer size of, for example, 64K or 128K bytes will
+ noticeably increase the speed of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters.
+
+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+ opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file is not in gzip format, gzread copies the given number of
+ bytes into the buffer directly from the file.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream. Any number of gzip streams may be
+ concatenated in the input file, and will all be decompressed by gzread().
+ If something other than a gzip stream is encountered after a gzip stream,
+ that remaining trailing garbage is ignored (and no error is returned).
+
+ gzread can be used to read a gzip file that is being concurrently written.
+ Upon reaching the end of the input, gzread will return with the available
+ data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+ gzclearerr can be used to clear the end of file indicator in order to permit
+ gzread to be tried again. Z_OK indicates that a gzip stream was completed
+ on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
+ middle of a gzip stream. Note that gzread does not return -1 in the event
+ of an incomplete gzip stream. This error is deferred until gzclose(), which
+ will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+ stream. Alternatively, gzerror can be used before gzclose to detect this
+ case.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or 0 in case of error. The number of
+ uncompressed bytes written is limited to 8191, or one less than the buffer
+ size given to gzbuffer(). The caller should assure that this limit is not
+ exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+ nothing written. In this case, there may also be a buffer overflow with
+ unpredictable consequences, which is possible only if zlib was compiled with
+ the insecure functions sprintf() or vsprintf() because the secure snprintf()
+ or vsnprintf() functions were not available. This can be determined using
+ zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error. This is implemented as a macro for speed.
+ As such, it does not do all of the checking the other functions do. I.e.
+ it does not check to see if file is NULL, nor whether the structure file
+ points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatented gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+
+ When writing, gzdirect() returns true (1) if transparent writing was
+ requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
+ gzdirect() is not needed when writing. Transparent writing must be
+ explicitly requested, so the application already knows the answer. When
+ linking statically, using gzdirect() will include all of the zlib code for
+ gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+ last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the compression
+ library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster.
+
+ Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
+ that the z_off_t type (like off_t) is a signed integer. If len2 is
+ negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
+
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure. Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro. The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously. They can
+ * only be used by the gzgetc() macro. You have been warned.
+ */
+struct gzFile_s {
+ unsigned have;
+ unsigned char *next;
+ z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+# define z_gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+# define gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+# ifdef Z_PREFIX_SET
+# define z_gzopen z_gzopen64
+# define z_gzseek z_gzseek64
+# define z_gztell z_gztell64
+# define z_gzoffset z_gzoffset64
+# define z_adler32_combine z_adler32_combine64
+# define z_crc32_combine z_crc32_combine64
+# else
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# endif
+# ifndef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
+ const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ const char *format,
+ va_list va));
+# endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
--- /dev/null
+ZLIB_1.2.0 {
+ global:
+ compressBound;
+ deflateBound;
+ inflateBack;
+ inflateBackEnd;
+ inflateBackInit_;
+ inflateCopy;
+ local:
+ deflate_copyright;
+ inflate_copyright;
+ inflate_fast;
+ inflate_table;
+ zcalloc;
+ zcfree;
+ z_errmsg;
+ gz_error;
+ gz_intmax;
+ _*;
+};
+
+ZLIB_1.2.0.2 {
+ gzclearerr;
+ gzungetc;
+ zlibCompileFlags;
+} ZLIB_1.2.0;
+
+ZLIB_1.2.0.8 {
+ deflatePrime;
+} ZLIB_1.2.0.2;
+
+ZLIB_1.2.2 {
+ adler32_combine;
+ crc32_combine;
+ deflateSetHeader;
+ inflateGetHeader;
+} ZLIB_1.2.0.8;
+
+ZLIB_1.2.2.3 {
+ deflateTune;
+ gzdirect;
+} ZLIB_1.2.2;
+
+ZLIB_1.2.2.4 {
+ inflatePrime;
+} ZLIB_1.2.2.3;
+
+ZLIB_1.2.3.3 {
+ adler32_combine64;
+ crc32_combine64;
+ gzopen64;
+ gzseek64;
+ gztell64;
+ inflateUndermine;
+} ZLIB_1.2.2.4;
+
+ZLIB_1.2.3.4 {
+ inflateReset2;
+ inflateMark;
+} ZLIB_1.2.3.3;
+
+ZLIB_1.2.3.5 {
+ gzbuffer;
+ gzoffset;
+ gzoffset64;
+ gzclose_r;
+ gzclose_w;
+} ZLIB_1.2.3.4;
+
+ZLIB_1.2.5.1 {
+ deflatePending;
+} ZLIB_1.2.3.5;
+
+ZLIB_1.2.5.2 {
+ deflateResetKeep;
+ gzgetc_;
+ inflateResetKeep;
+} ZLIB_1.2.5.1;
+
+ZLIB_1.2.7.1 {
+ inflateGetDictionary;
+ gzvprintf;
+} ZLIB_1.2.5.2;
--- /dev/null
+prefix=@CMAKE_INSTALL_PREFIX@
+exec_prefix=@CMAKE_INSTALL_PREFIX@
+libdir=@INSTALL_LIB_DIR@
+sharedlibdir=@INSTALL_LIB_DIR@
+includedir=@INSTALL_INC_DIR@
+
+Name: zlib
+Description: zlib compression library
+Version: @VERSION@
+
+Requires:
+Libs: -L${libdir} -L${sharedlibdir} -lz
+Cflags: -I${includedir}
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+sharedlibdir=@sharedlibdir@
+includedir=@includedir@
+
+Name: zlib
+Description: zlib compression library
+Version: @VERSION@
+
+Requires:
+Libs: -L${libdir} -L${sharedlibdir} -lz
+Cflags: -I${includedir}
--- /dev/null
+#!/usr/bin/perl
+
+# Transform K&R C function definitions into ANSI equivalent.
+#
+# Author: Paul Marquess
+# Version: 1.0
+# Date: 3 October 2006
+
+# TODO
+#
+# Asumes no function pointer parameters. unless they are typedefed.
+# Assumes no literal strings that look like function definitions
+# Assumes functions start at the beginning of a line
+
+use strict;
+use warnings;
+
+local $/;
+$_ = <>;
+
+my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments
+
+my $d1 = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ;
+my $decl = qr{ $sp (?: \w+ $sp )+ $d1 }xo ;
+my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ;
+
+
+while (s/^
+ ( # Start $1
+ ( # Start $2
+ .*? # Minimal eat content
+ ( ^ \w [\w\s\*]+ ) # $3 -- function name
+ \s* # optional whitespace
+ ) # $2 - Matched up to before parameter list
+
+ \( \s* # Literal "(" + optional whitespace
+ ( [^\)]+ ) # $4 - one or more anythings except ")"
+ \s* \) # optional whitespace surrounding a Literal ")"
+
+ ( (?: $dList )+ ) # $5
+
+ $sp ^ { # literal "{" at start of line
+ ) # Remember to $1
+ //xsom
+ )
+{
+ my $all = $1 ;
+ my $prefix = $2;
+ my $param_list = $4 ;
+ my $params = $5;
+
+ StripComments($params);
+ StripComments($param_list);
+ $param_list =~ s/^\s+//;
+ $param_list =~ s/\s+$//;
+
+ my $i = 0 ;
+ my %pList = map { $_ => $i++ }
+ split /\s*,\s*/, $param_list;
+ my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ;
+
+ my @params = split /\s*;\s*/, $params;
+ my @outParams = ();
+ foreach my $p (@params)
+ {
+ if ($p =~ /,/)
+ {
+ my @bits = split /\s*,\s*/, $p;
+ my $first = shift @bits;
+ $first =~ s/^\s*//;
+ push @outParams, $first;
+ $first =~ /^(\w+\s*)/;
+ my $type = $1 ;
+ push @outParams, map { $type . $_ } @bits;
+ }
+ else
+ {
+ $p =~ s/^\s+//;
+ push @outParams, $p;
+ }
+ }
+
+
+ my %tmp = map { /$pMatch/; $_ => $pList{$1} }
+ @outParams ;
+
+ @outParams = map { " $_" }
+ sort { $tmp{$a} <=> $tmp{$b} }
+ @outParams ;
+
+ print $prefix ;
+ print "(\n" . join(",\n", @outParams) . ")\n";
+ print "{" ;
+
+}
+
+# Output any trailing code.
+print ;
+exit 0;
+
+
+sub StripComments
+{
+
+ no warnings;
+
+ # Strip C & C++ coments
+ # From the perlfaq
+ $_[0] =~
+
+ s{
+ /\* ## Start of /* ... */ comment
+ [^*]*\*+ ## Non-* followed by 1-or-more *'s
+ (
+ [^/*][^*]*\*+
+ )* ## 0-or-more things which don't start with /
+ ## but do end with '*'
+ / ## End of /* ... */ comment
+
+ | ## OR C++ Comment
+ // ## Start of C++ comment //
+ [^\n]* ## followed by 0-or-more non end of line characters
+
+ | ## OR various things which aren't comments:
+
+ (
+ " ## Start of " ... " string
+ (
+ \\. ## Escaped char
+ | ## OR
+ [^"\\] ## Non "\
+ )*
+ " ## End of " ... " string
+
+ | ## OR
+
+ ' ## Start of ' ... ' string
+ (
+ \\. ## Escaped char
+ | ## OR
+ [^'\\] ## Non '\
+ )*
+ ' ## End of ' ... ' string
+
+ | ## OR
+
+ . ## Anything other char
+ [^/"'\\]* ## Chars which doesn't start a comment, string or escape
+ )
+ }{$2}gxs;
+
+}
--- /dev/null
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+#ifndef Z_SOLO
+# include "gzguts.h"
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state {int dummy;}; /* for buggy compilers */
+#endif
+
+z_const char * const z_errmsg[10] = {
+"need dictionary", /* Z_NEED_DICT 2 */
+"stream end", /* Z_STREAM_END 1 */
+"", /* Z_OK 0 */
+"file error", /* Z_ERRNO (-1) */
+"stream error", /* Z_STREAM_ERROR (-2) */
+"data error", /* Z_DATA_ERROR (-3) */
+"insufficient memory", /* Z_MEM_ERROR (-4) */
+"buffer error", /* Z_BUF_ERROR (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+ uLong flags;
+
+ flags = 0;
+ switch ((int)(sizeof(uInt))) {
+ case 2: break;
+ case 4: flags += 1; break;
+ case 8: flags += 2; break;
+ default: flags += 3;
+ }
+ switch ((int)(sizeof(uLong))) {
+ case 2: break;
+ case 4: flags += 1 << 2; break;
+ case 8: flags += 2 << 2; break;
+ default: flags += 3 << 2;
+ }
+ switch ((int)(sizeof(voidpf))) {
+ case 2: break;
+ case 4: flags += 1 << 4; break;
+ case 8: flags += 2 << 4; break;
+ default: flags += 3 << 4;
+ }
+ switch ((int)(sizeof(z_off_t))) {
+ case 2: break;
+ case 4: flags += 1 << 6; break;
+ case 8: flags += 2 << 6; break;
+ default: flags += 3 << 6;
+ }
+#ifdef DEBUG
+ flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+ flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+ flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+ flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+ flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+ flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+ flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+ flags += 1L << 20;
+#endif
+#ifdef FASTEST
+ flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifdef NO_vsnprintf
+ flags += 1L << 25;
+# ifdef HAS_vsprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_vsnprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#else
+ flags += 1L << 24;
+# ifdef NO_snprintf
+ flags += 1L << 25;
+# ifdef HAS_sprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_snprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#endif
+ return flags;
+}
+
+#ifdef DEBUG
+
+# ifndef verbose
+# define verbose 0
+# endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (m)
+ char *m;
+{
+ fprintf(stderr, "%s\n", m);
+ exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+ int err;
+{
+ return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
+ int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
+ Bytef* dest;
+ const Bytef* source;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = *source++; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
+ const Bytef* s1;
+ const Bytef* s2;
+ uInt len;
+{
+ uInt j;
+
+ for (j = 0; j < len; j++) {
+ if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+ }
+ return 0;
+}
+
+void ZLIB_INTERNAL zmemzero(dest, len)
+ Bytef* dest;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = 0; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+#endif
+
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+ voidpf org_ptr;
+ voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ voidpf buf = opaque; /* just to make some compilers happy */
+ ulg bsize = (ulg)items*size;
+
+ /* If we allocate less than 65520 bytes, we assume that farmalloc
+ * will return a usable pointer which doesn't have to be normalized.
+ */
+ if (bsize < 65520L) {
+ buf = farmalloc(bsize);
+ if (*(ush*)&buf != 0) return buf;
+ } else {
+ buf = farmalloc(bsize + 16L);
+ }
+ if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+ table[next_ptr].org_ptr = buf;
+
+ /* Normalize the pointer to seg:0 */
+ *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+ *(ush*)&buf = 0;
+ table[next_ptr++].new_ptr = buf;
+ return buf;
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ int n;
+ if (*(ush*)&ptr != 0) { /* object < 64K */
+ farfree(ptr);
+ return;
+ }
+ /* Find the original pointer */
+ for (n = 0; n < next_ptr; n++) {
+ if (ptr != table[n].new_ptr) continue;
+
+ farfree(table[n].org_ptr);
+ while (++n < next_ptr) {
+ table[n-1] = table[n];
+ }
+ next_ptr--;
+ return;
+ }
+ ptr = opaque; /* just to make some compilers happy */
+ Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+# define _halloc halloc
+# define _hfree hfree
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ return _halloc((long)items, size);
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp malloc OF((uInt size));
+extern voidp calloc OF((uInt items, uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+ voidpf opaque;
+ unsigned items;
+ unsigned size;
+{
+ if (opaque) items += size - size; /* make compiler happy */
+ return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+ (voidpf)calloc(items, size);
+}
+
+void ZLIB_INTERNAL zcfree (opaque, ptr)
+ voidpf opaque;
+ voidpf ptr;
+{
+ free(ptr);
+ if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
--- /dev/null
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
+#include "zlib.h"
+
+#if defined(STDC) && !defined(Z_SOLO)
+# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+# include <stddef.h>
+# endif
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef Z_SOLO
+ typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long ulg;
+
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+ return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+ /* common constants */
+
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+ /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+# define OS_CODE 0x00
+# ifndef Z_SOLO
+# if defined(__TURBOC__) || defined(__BORLANDC__)
+# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+ /* Allow compilation with ANSI keywords only enabled */
+ void _Cdecl farfree( void *block );
+ void *_Cdecl farmalloc( unsigned long nbytes );
+# else
+# include <alloc.h>
+# endif
+# else /* MSC or DJGPP */
+# include <malloc.h>
+# endif
+# endif
+#endif
+
+#ifdef AMIGA
+# define OS_CODE 0x01
+#endif
+
+#if defined(VAXC) || defined(VMS)
+# define OS_CODE 0x02
+# define F_OPEN(name, mode) \
+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#if defined(ATARI) || defined(atarist)
+# define OS_CODE 0x05
+#endif
+
+#ifdef OS2
+# define OS_CODE 0x06
+# if defined(M_I86) && !defined(Z_SOLO)
+# include <malloc.h>
+# endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+# define OS_CODE 0x07
+# ifndef Z_SOLO
+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fdopen */
+# else
+# ifndef fdopen
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# endif
+# endif
+# endif
+#endif
+
+#ifdef TOPS20
+# define OS_CODE 0x0a
+#endif
+
+#ifdef WIN32
+# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */
+# define OS_CODE 0x0b
+# endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+# define OS_CODE 0x0f
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+# if defined(_WIN32_WCE)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# ifndef _PTRDIFF_T_DEFINED
+ typedef int ptrdiff_t;
+# define _PTRDIFF_T_DEFINED
+# endif
+# else
+# define fdopen(fd,type) _fdopen(fd,type)
+# endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+ #pragma warn -8004
+ #pragma warn -8008
+ #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+ /* common defaults */
+
+#ifndef OS_CODE
+# define OS_CODE 0x03 /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+# define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+ /* functions */
+
+#if defined(pyr) || defined(Z_SOLO)
+# define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+ * You may have to use the same strategy for Borland C (untested).
+ * The __SC__ check is for Symantec.
+ */
+# define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+# define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+# define zmemcpy _fmemcpy
+# define zmemcmp _fmemcmp
+# define zmemzero(dest, len) _fmemset(dest, 0, len)
+# else
+# define zmemcpy memcpy
+# define zmemcmp memcmp
+# define zmemzero(dest, len) memset(dest, 0, len)
+# endif
+#else
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# include <stdio.h>
+ extern int ZLIB_INTERNAL z_verbose;
+ extern void ZLIB_INTERNAL z_error OF((char *m));
+# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+# define Trace(x) {if (z_verbose>=0) fprintf x ;}
+# define Tracev(x) {if (z_verbose>0) fprintf x ;}
+# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+#ifndef Z_SOLO
+ voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+ unsigned size));
+ void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
+#endif
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */
projects / SCSI2SD.git / commitdiff