From: Michael McMaster <michael@codesrc.com>
Date: Thu, 3 Oct 2013 00:20:19 +0000 (+1000)
Subject: Adding STATUS file to indicate the pcb doesn't match the software
X-Git-Tag: v3.0~15
X-Git-Url: http://git.codesrc.com/gitweb.cgi?a=commitdiff_plain;h=31edbe3fc279287226df19895eb929cde03d85fb;p=SCSI2SD-V6.git

Adding STATUS file to indicate the pcb doesn't match the software
---

diff --git a/STATUS b/STATUS
new file mode 100644
index 00000000..be57b079
--- /dev/null
+++ b/STATUS
@@ -0,0 +1,15 @@
+- Software has not been updated for PCB rev 3.0. In particular, most of the pin
+assignments are incorrect.
+
+- USB bootloader is not implemented yet.
+
+- Configuration options are not yet loaded from EEPROM.
+- Configuration options cannot be set via USB.
+	- SCSI ID hardcoded to 0
+	- Partity checking is on
+	- Unit Attention Condition is off
+
+- Write performance is not adequate
+	- Multi-sector SD commands are not yet supported.
+	- DMA is not used for SPI transfers
+